* monitor.c: Turn on caching.
(monitor_printf): If a ^C was sent, don't expect to see its
echo.
(monitor_open): Enable caching.
(monitor_resume, monitor_load): Flush cache.
(monitor_xfer_memory): Call cache routine.
(monitor_dump_regs): New.
(monitor_fetch_registers): If monitor_dump_regs available
then use it.
(monitor_load): Don't ref exec_bfd if it's NULL.
(monitor_load_srec): Use new monitor_make_srec calling convention.
(monitor_make_srec): Rewrite to cope with two, three and four byte
addresses.
* remote-hms.c (hms_cmds): Initialze end-of-command delim.
* dcache.h, dcache.h: Rewritten.
* remote.c: Reenable caching.
(getpkt): Reduce MAX_TRIES to 3.
(remote_xfer_memory): Use dcache_xfer_memory.
* defs.h (error_hook): New.
* top.c (error_hook): New definition.
* utils.c (error): Use error_hook if initialized.
* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use
HAVE_SOCKETS in place of #ifndef GO32.
match stubs and protocol spec.
* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
when passing to function which expects that.
The following changes aren't quite enough to make things work with
LynxOS (apprently kernel problems).
* infrun.c (wait_for_inferior): When resuming new thread, pass pid
not -1 for remote case.
* thread.c (info_threads_command): Give error if !target_has_stack.
* infrun.c (start_remote): Call init_thread_list.
* thread.c (info_threads_command): Don't call kill for remote
debugging target.
* target.c (normal_pid_to_str): Print "thread" not "process" for
remote.
* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
response, and `thread' part of 'T' response.
* gdbserver/*: If program exits, send packet to GDB before
exiting. Handle termination with a signal the same as exiting
with an exitstatus.
* remote.c: Don't try to kill program after getting an 'X'
response.
* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
* config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than
REGISTER_RAW_SIZE (1).
Together these changes work around a bug in HP's compiler. Both
seem to be necessary.
than just giving up the first time it happens.
* remote.c: Document sequence numbers.
(remote_store_registers): Change syntax of 'P' request so that it
never looks like a sequence number.
* alpha-tdep.c: Gobs of changes (many imported from mips-tdep) to
improve remote debugging efficiency. Also fixed problems with
doing function calls for programs with no entry points.
* infcmd.c (run_stack_dummy): Use CALL_DUMMY_ADDRESS instead of
entry_point_address.
* inferior.h (PC_IN_CALL_DUMMY): ditto.
* mdebugread.c (parse_symbol, parse_procedure, parse_external,
parse_lines): Pass section_offsets info to these routines so that
we can relocate symbol table entries upon readin.
* (psymtab_to_symtab_1): Set symtab->primary to tell
objfile_relocate to do relocations for our symbols.
* (ecoff_relocate_efi): New routine to relocate adr field of PDRs
(which hang off of the symbol table).
* Use prim_record_minimal_symbols_and_info instead of
prim_record_minimal_symbols to supply section info to make minimal
symbol relocations work.
* minsyms.c (prim_record_minimal_symbols_and_info): If section is
-1, try to deduce it from ms_type.
* objfiles.c (objfile_relocate): Use ALL_OBJFILE_SYMTABS where
appropriate. Handle relocation of MIPS_EFI symbols special. Also,
add code to relocate objfile->sections data structure.
* remote.c (get_offsets): Use new protocol message to acquire
section offsets from the target.
* (remote_wait): Get rid of relocation stuff. That's all handled
by objfile_relocate now.
* config/alpha/alpha-nw.mt (TM_FILE): Use tm-alphanw.h.
* config/alpha/tm-alpha.h: Define CALL_DUMMY_ADDRESS, and
VM_MIN_ADDRESS.
* config/alpha/tm-alphanw.h: DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
find, to locate TM_FILE, XM_FILE, and NAT_FILE. This is faster
and means that these filenames no longer need be unique across all
the config/* directories.
* configure.in: Put the config/*/ into TM_FILE, etc.
* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
and trapv exceptions.
* target.h (struct section_table), objfiles.h (struct obj_section):
Change name of field sec_ptr to the_bfd_section. More mnemonic
and avoids the (sort of, for the ptx compiler) name clash with
the name of the typedef.
* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
* utils.c: Include readline.h.
* Makefile.in (utils.o): Add dependency.
* remote.c (getpkt): Add support for run-length encoding.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
right operations ourself, rather than calling symbol_file_command.
If we re-read something, call clear_symtab_users not just
breakpoint_re_set.
* objfiles.h, objfiles.c (build_objfile_section_table): No longer
static.
* symfile.c (clear_symtab_users): Call clear_pc_function_cache.
* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c
(*_symfile_offsets): Set objfile->num_sections.
* remote.c (remote_wait), symfile.c (syms_from_objfile):
Don't muck with objfile->num_sections now that all the symbol
readers set it.
* elfread.c: Clean up obsolete comment about handling only DWARF.
* paread.c: Remove comment about how we should use an "ordinary"
file format with an hppa suffix. There is nothing ordinary about SOM.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
* remote.c, remote-udi.c, remote-utils.h: Let target.h take care of
declaring these. Those random externs all over are error prone.
* Move "set remotebaud" from remote-utils.c to main.c to it applies
to remote.c as well.
* xcoffread.c (xcoff_symfile_read), coffread.c (coff_symfile_read):
Sort symtabs for this objfile only, not for all objfiles.
* symfile.c, symfile.h (sort_all_symtab_syms): Remove; no longer used.
remove #include "remote-utils.h". This makes it possible to build
GDB without remote-utils.c. Also, move setting of remote_debug
into main, so that all remote*.c files can use it (not just the
serial line ones). And, make baud_rate be an int.
* remote-udi.c: Change kiodebug to remote_debug.
* remote-utils.c: Move setting of baud rate and debug into main.c.
* remote-utils.h: Redefine sr_{get set}_debug and sr_{get set}_baud
to use baud_rate and remote_debug globals for compatibility.
* remote.c: Use remote_debug and baud_rate globals directly,
instead of sr_ functions, so that we don't need to load
remote-utils.c.
beyond the end of the last function in an objfile.
* coff-solib.c (coff_solib_add): Use BFD to get fields from .lib
section.
* infrun.c (wait_for_inferior): Modify test for subroutine entry
to include pc out of bounds of the previous function.
* remote.c (remote_wait): Use strtoul for parsing 'N' message.
Add code to relocate symfile_objfile->sections.
* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
returning foo' as well as `pointer to foo'.
* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
* config/m68k/tm-m68k.h: Define it.
* mem-break.c, breakpoint.c: Improve comments.
Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
(remote_open): Use unpush_target not remote_close.
(remote_resume): If siggnal != 0, give warning not error().
(remote_wait, remote_interrupt, remote_interrupt_twice):
If we get two interrupts, let the user get out if they want.
(remote_{kill,mourn}): New functions.
i386-stub.c (handle_exception, case 'k'): Don't BREAKPOINT.
of initial connection attempt with INTERRUPT. Treat a timeout
while waiting for remote packet like a retry, unless the remote
side is actively running user code. Fix a few long printf_filtered's.
* xcoffread.c (read_xcoff_symtab): Don't use null symbol name for
trampoline symbols.
* buildsym.c (start_subfile): Allow null file name.
* am29k-tdep.c (_initialize_29k): Make it possible for the
user to set and query the address where function calls into the
inferior write a small scratch routine. `set call_scratch_address'
* inferior.h (PC_IN_CALL_DUMMY): Fix fencepost error.
* remote.c (remote_prepare_to_store): Only fetch regs if they are
not already cached validly.
application, and it will speak GDB remote protocol!
* remote.c (remote_wait): Change 'T' (expedited reply) message to
deal with arbitrary registers. Needed for sparc-stub,
conditional.
* hppabsd-core.c: Don't include "param.h", include <sys/param.h>
instead.
* remote.c (remote_wait): Cast signal to void * to avoid warning
from busted HP compiler.
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
