before the mach-specific switch, and then let the individual cases
override the defaults, rather than leaving them uninitialized
until the switch and then setting them in each case.
an improved version of some code extracted from skip_prologue().
(skip_prologue): Use store_param_on_stack_p() to detect
instructions saving a parameter on the stack. Detect when r0
is used to save a parameter.
Do not mark "li rx, SIMM" instructions as part of the prologue,
unless the following instruction is also part of the prologue.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
* infcall.c (call_function_by_hand): When no
DEPRECATED_SAVE_DUMMY_FRAME_TOS call generic_save_dummy_frame_tos.
* rs6000-tdep.c (rs6000_gdbarch_init): Do not set
DEPRECATED_SAVE_DUMMY_FRAME_TOS.
* mn10300-tdep.c (mn10300_gdbarch_init): Ditto.
* mcore-tdep.c (mcore_gdbarch_init): Ditto.
function for register numbers on all the rs6000-derived targets.
(rs6000_gdbarch_init): Don't register a separate
gdbarch_dwarf2_reg_to_regnum function for the E500. Use
rs6000_dwarf2_stab_reg_to_regnum for both Dwarf 2 and stabs on all
variants.
Changes from Peter Schauer.
* rs6000-tdep.c: Update copyright year.
(rs6000_push_dummy_call): Update the stack pointer before
accessing the corresponding stack region.
* rs6000-nat.c: Update copyright year.
(set_host_arch): Set "info.abfd" to "exec_bfd".
* rs6000-tdep.c (e500_store_return_value): Delete function.
(e500_extract_return_value): Delete function.
(rs6000_gdbarch_init): When SYSV, set "extract_return_value" and
"restore_return_value" to "ppc_sysv_abi_extract_return_value" and
"ppc_sysv_abi_restore_return_value" where applicable.
* ppc-tdep.h: (ppc_sysv_abi_store_return_value): Declare.
(ppc_sysv_abi_extract_return_value): Declare.
(ppc_sysv_abi_broken_store_return_value): Declare.
(ppc_sysv_abi_broken_extract_return_value): Declare.
(ppc_sysv_abi_broken_use_struct_convention:) Delete declaration.
* ppc-sysv-tdep.c (return_value_convention): Move definition to
start of file.
(do_ppc_sysv_return_value): New function.
(ppc_sysv_abi_extract_return_value): New function.
(ppc_sysv_abi_store_return_value): New function.
(ppc_sysv_abi_broken_extract_return_value): New function.
(ppc_sysv_abi_broken_store_return_value): New function.
(ppc_sysv_abi_use_struct_convention): Call
do_ppc_sysv_return_value.
* Makefile.in (ppc-sysv-tdep.o): Add $(gdb_assert_h).
* rs6000-tdep.c (rs6000_gdbarch_init): When 64 bit SysV ABI, set
push_dummy_call to ppc64_sysv_abi_push_dummy_call.
* ppc-sysv-tdep.c: Include "gdb_assert.h".
(ppc64_sysv_abi_push_dummy_call): New function.
(ppc64_sysv_abi_broken_push_dummy_call): New function.
* ppc-tdep.h (ppc64_sysv_abi_push_dummy_call): Declare.
(ppc64_sysv_abi_broken_push_dummy_call): Declare.
* rs6000-tdep.c (rs6000_gdbarch_init): When the 64 bit SysV ABI,
set extract_return_value, store_return_value and
use_struct_convention to ppc64_sysv_abi_extract_return_value,
ppc64_sysv_abi_store_return_value and
ppc64_sysv_abi_use_struct_convention.
* ppc-tdep.h (ppc64_sysv_abi_extract_return_value): Declare.
(ppc64_sysv_abi_store_return_value): Declare.
(ppc64_sysv_abi_use_struct_convention): Declare.
* ppc-sysv-tdep.c (enum return_value_convention): Define.
(ppc64_sysv_abi_extract_return_value): New function.
(ppc64_sysv_abi_store_return_value): New function.
(ppc64_sysv_abi_use_struct_convention): New function.
(ppc64_sysv_abi_return_value): New function.
* ppc-linux-tdep.c (ppc_linux_init_abi): Set the 32 bit
"use_struct_convention" to "ppc_linux_use_struct_convention".
(ppc_linux_use_struct_convention): New function.
* rs6000-tdep.c (rs6000_use_struct_convention): New function.
(rs6000_gdbarch_init): For AIX, set "use_struct_convention" to
"rs6000_use_struct_convention".
* ppc-tdep.h (ppc_sysv_abi_broken_use_struct_convention): Delete
declaration.
* ppc-sysv-tdep.c (ppc_sysv_abi_broken_use_struct_convention):
Delete function.
