Commit Graph

12553 Commits

Author SHA1 Message Date
Ian Lance Taylor
c4299ed83a * archive.c (bsd_write_armap): Cast getuid and getgid results to
long, and print with %ld.
1995-03-13 18:49:44 +00:00
Ian Lance Taylor
3cbb8192fa * mh-hpux8: New file.
* mh-hpux: Use X11R5 rather than X11R4.
1995-03-13 17:37:39 +00:00
Ian Lance Taylor
0259fc7399 * configure.in (*-hp-hpux[78]*): Use mh-hpux8. 1995-03-13 17:36:19 +00:00
David Edelsohn
890b53ef65 * elf32-arc.c (elf_arc_howto_table): Relocs with implicit addends
don't work too well with zero src_masks.  Correct values.
1995-03-12 13:26:57 +00:00
David Edelsohn
8dbed89e06 arc-dis.c (print_insn): Put "+ 4" of relative addresses back. Oops. 1995-03-12 13:21:07 +00:00
Jim Kingdon
2f8996dc3c * gdb.base/a1-selftest.exp: Remove xfail for solaris. The bug (PR
1817) was fixed literally years ago.
1995-03-11 05:34:40 +00:00
Ken Raeburn
78fcad5848 * config/obj-coff.c: Redo my 10 Jan change, but get it right this time. :-)
(fixup_segment): If linkrelax is set, just return.
(write_object_file): Don't treat h8300 and z8k specially with regard to fixups.
* config/tc-h8300.c (md_begin): Set linkrelax.
* config/tc-z8k.c (md_begin): Ditto.
1995-03-11 00:30:30 +00:00
Ken Raeburn
13641953c5 * gas/h8300/ffxx1.s: Add .word 0 at the end to eliminate uncertainty as to
whether there should be trailing bytes in the output file.
* gas/h8300/ffxx1.d: Adjust reloc values to permit an addend value of
0x00000000ffffffff on 64-bit hosts.  (I'm not sure if this is correct.)  End
with "..." to match trailing zero bytes.
1995-03-11 00:17:26 +00:00
Kung Hsu
c230fbb6df * config/tm-arc.h: Change arc register names. 1995-03-11 00:17:15 +00:00
Ken Raeburn
0eb1f9cefa whitespace/comment formatting 1995-03-10 22:33:28 +00:00
Ian Lance Taylor
6a107a2838 * aoutx.h (translate_to_native_sym_flags): Always use the output
section if it is not NULL.
PR 6477.
1995-03-10 21:43:02 +00:00
Ian Lance Taylor
22c41f00b6 * ldmain.c (main): Don't set EXEC_P if link_info.shared is set. 1995-03-10 20:26:49 +00:00
Ian Lance Taylor
01bc8f35b5 * ldlex.l: Return -lFILENAME as the token LNAME.
* ldgram.y: Add token LNAME.
	(input_list): Treat LNAME like NAME, but pass it to
	lang_add_input_file as lang_input_file_is_l_enum.
	* ld.texinfo: Document using -lFILENAME in INPUT.
1995-03-10 20:02:51 +00:00
Stan Shebs
6e9cac5f32 default to keeping rather than losing gdbtk 1995-03-10 19:39:59 +00:00
Stan Shebs
fc5a05e946 Add verboseness to mpw sanitize, add lose-gdbtk for FSF releases 1995-03-10 19:37:48 +00:00
Stan Shebs
8cbf6efc61 Finish sanitization gaffes 1995-03-10 18:39:48 +00:00
Ian Lance Taylor
ec5865657b document split-by-reloc and split-by-file 1995-03-10 18:36:43 +00:00
Ian Lance Taylor
dff604a75f * objcopy.c (strip_options): Add --keep-symbol.
(copy_options): Likewise.
	(copy_usage): Mention --keep-symbol and -K.
	(strip_usage): Likewise.
	(keep_symbols): New static variable.
	(is_strip_symbol): Adjust the return value according to
	keep_symbols.
	(strip_main): Handle -K.  For -N, check that -K was not given.
	(copy_main): Likewise.
	* binutils.texi, objcopy.1, strip.1: Document -K.
1995-03-10 18:13:31 +00:00
Peter Schauer
d4f389f692 * gdb.c++/templates.exp: Source templ-info.exp only if
the templates executable exists.
1995-03-10 12:18:05 +00:00
Peter Schauer
07b963574f * gdb.base/funcargs.exp (call_after_alloca): Remove `next'
test, it causes stepping out of call_after_alloca_subr with
	optimizing compilers.
	(localvars_in_indirect_call):  Consume GDB prompt if `finish'
	fails.

	* gdb.c++/misc.cc (class Contains_static_instance,
	class Contains_nested_static_instance),
	gdb.c++/classes.exp (test_static_members):  Test printing of
	a class that contains a static instance of the class.
1995-03-10 11:24:30 +00:00
Peter Schauer
a1a0d97484 Fix problems with infinite recursion when printing a class
that contains a static instance of the class.
	* cp-valprint.c (dont_print_vb_obstack):  Renamed from
	dont_print_obstack, made static.
	(dont_print_statmem_obstack):  New obstack, controls printing
	of static member classes.
	(_initialize_cp_valprint):  Initialize it.
	(cp_print_static_field):  New function, handles printing of
	static members.
	(cp_print_value_fields):  New parameter dont_print_statmem to
	handle recursive printing of static member classes, use
	cp_print_static_field to handle printing of static members.
	* c-valprint.c (cp_print_value_fields):  Update prototype and
	call to include additional dont_print_statmem parameter.
	* c-valprint.c, f-valprint.c (dont_print_obstack):  Remove unused
	extern declaration.

	* alpha-tdep.c, findvar.c, infptrace.c:  Include <string.h>.

	* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS):  Call
	alpha_find_saved_regs if fi->saved_regs is still NULL.

	* elfread.c (elf_symtab_read):  Ensure that the filename field
	of a minsym is nonempty. Ignore solib trampoline symbols from
	the main symbol table, they might have a bogus value.

	* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
	Fix typos in comments.
1995-03-10 11:21:32 +00:00
Jim Kingdon
45d6f6230e * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1.  That way
	we know whether the PDR ever got set.
	* mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
	use the PDR, just examine prologues instead.
1995-03-10 01:26:09 +00:00
Ian Lance Taylor
5fc2a6ecd2 * config/obj-coff.c (coff_header_append): Check return value of
bfd_coff_swap_scnhdr_out.
1995-03-09 23:02:43 +00:00
Ian Lance Taylor
99514eec14 * coffswap.h (coff_swap_scnhdr_out): If the line number count or
the reloc count does not fit, print an error and return 0.
	* coffcode.h (coff_write_object_contents): Check return value of
	coff_swap_scnhdr_out.
	* ecoff.c (_bfd_ecoff_write_object_contents): Check return value
	of bfd_coff_swap_scnhdr_out.
1995-03-09 22:58:14 +00:00
Ian Lance Taylor
0318ed3109 * bfd.c: Include <stdarg.h> or <varargs.h>, depending upon
ANSI_PROTOTYPES.
	(bfd_error_handler_type): New global type.
	(_bfd_error_program_name): New static variable.
	(_bfd_default_error_handler): New static function.
	(_bfd_error_handler): New BFD private global variable.
	(bfd_set_error_handler): New globally visible function.
	(bfd_set_error_program_name): New globally visible function.
	* libbfd-in.h (_bfd_error_handler): Declare.
	* bfd-in2.h, libbfd.h: Rebuild.
1995-03-09 22:16:40 +00:00
David Edelsohn
9a6ec5ebd1 Delete this patch, it breaks the h8300 assembler.
Tue Jan 10 13:34:14 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
	* config/obj-coff.c (write_object_file): Don't treat h8300 and z8k
	specially with regard to fixups.
1995-03-09 21:54:14 +00:00
David Edelsohn
df0f11ff33 Delete this patch, it breaks the h8300 assembler.
* config/obj-coff.c (write_object_file): Don't treat h8300 and z8k
	specially with regard to fixups.
1995-03-09 21:51:42 +00:00
Ken Raeburn
f3a01d90ed keep new mips4 test files 1995-03-09 20:28:14 +00:00
Ian Lance Taylor
2f6754271f * aoutx.h (NAME(aout,swap_ext_reloc_in)): Add symcount parameter,
and use it instead of bfd_get_symcount.  Check r_index after
	setting r_extern based on whether this is a base relative reloc.
	(NAME(aout,swap_std_reloc_IN)): Add symcount parameter, and use it
	instead of bfd_get_symcount.
	(NAME(aout,slurp_reloc_table)): Pass bfd_get_symcount to reloc
	swap routines.
	* libaout.h (NAME(aout,swap_ext_reloc_in)): Add symcount parameter
	to declaration.
	(NAME(aout,swap_std_reloc_in)): Likewise.
	* sunos.c (sunos_canonicalize_dynamic_reloc): Pass
	info->dynsym_count to reloc swap routines.
	* aout-ns32k.c (MY_swap_std_reloc_in): Add symcount parameter.
	* hp300hpux.c (MY(swap_std_reloc_in)): Likewise.
	(MY(slurp_reloc_table)): Pass bfd_get_symcount to reloc swap
	routine.
	* i386lynx.c (NAME(lynx,swap_ext_reloc_in)): Add symcount
	parameter.
	(NAME(lynx,swap_std_reloc_in)): Likewise.
	(NAME(lynx,slurp_reloc_table)): Pass bfd_get_symcount to reloc
	swap routines.
1995-03-09 20:14:04 +00:00
Michael Meissner
d5fb1e2a71 Add support for checking whether all PowerPC ELF modules either use -mrelocatable or do not. 1995-03-09 17:20:20 +00:00
Jeff Law
eb1e8d350d * somsolib.c (som_solib_section_offsets): Get offset of text
section right.
1995-03-09 06:37:02 +00:00
Stu Grossman
9468f8aa3e * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint
type is not bp_breakpoint.
1995-03-09 00:43:41 +00:00
Stu Grossman
34c40fd7e8 * source.c (forward_search_command reverse_search_command): Set
convenience variable $_ to be the line # of the match.
	* symtab.c (decode_line_1):  Allow convenience variables to be
	used in line specs (for breakpoints and such).
1995-03-09 00:25:15 +00:00
Michael Meissner
796ee68bff fix typo 1995-03-08 23:19:48 +00:00
Michael Meissner
b14e618286 Add ppc.h 1995-03-08 23:15:42 +00:00
Jim Kingdon
5e8ade2361 * *.exp: Skip all tests silently if skip_chill_tests returns true.
* misc.exp: Remove reference to non-existent variable passcount.
1995-03-08 21:32:37 +00:00
Jim Kingdon
a331c834c1 * lib/gdb.exp (skip_chill_tests): New procedure. 1995-03-08 21:30:07 +00:00
Jim Kingdon
54e85b8bd0 * gdb.base/signals.exp (signal_tests_1): xfail for irix. 1995-03-08 21:16:15 +00:00
Stan Shebs
9561821190 * Makefile.in (VERSION): Bump to 4.14.1.
* NEWS, README: Update for 4.14.
	* i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
	(i386_insert_nonaligned_watchpoint): Call aligned instead of
	generic watchpoint insertion.
1995-03-08 21:07:41 +00:00
Ian Lance Taylor
27326785a5 * gas/mips/mips4.d, gas/mips/mips4.s: New files.
* gas/mips/mips.exp: Run new test.
1995-03-08 20:51:35 +00:00
Ian Lance Taylor
0f6020cb02 * cpu-mips.c (arch_info_struct): Add mips:8000 entry. 1995-03-08 20:47:26 +00:00
Ian Lance Taylor
a79bf95d03 * config/tc-mips.c (md_begin): Check for a cpu string of r8000 or
r10000.  If mips_isa is 4, set the machine number to 8000.
	(append_insn): If mips_isa is at least 4, don't generate nops for
	coprocessor delays.  Check INSN_READ_FPR_R when setting
	mips_cprmask[1].
	(mips_emit_delays): If mips_isa is at least 4, don't generate nops
	for coprocessor delays.
	(mips_ip): Check for INSN_ISA4 instructions.  Handle new argument
	types 'h', 'R', 'N', and 'M'.
	(md_longopts): Accept "mips4".
	(md_parse_option): Handle -mips4, and -mcpu=10000 and -mcpu=8000.
	(s_mipsset): Permit .set mips4.
1995-03-08 20:46:47 +00:00
Michael Meissner
74e1b52ea3 Allow .stab section to contain non PC relative addresses if -mrelocatable. 1995-03-08 15:03:50 +00:00
Ken Raeburn
8cf2e6ebbc * m68k-dis.c (BREAK_UP_BIG_DECL): Make secondary array static and const.
(reg_names): Now const.
(print_insn_arg): Arrays cacheFieldName and names now const.
(print_indexed): Array scales now const.
1995-03-08 08:23:24 +00:00
Ken Raeburn
20275e0c51 Separated out opcode aliases from m68k opcode table, to reduce table size and
processing time.  Aliases are now a separate table.

* m68k.h (enum m68k_architecture): Deleted.
(struct m68k_opcode_alias): New type.
(m68k_opcodes): Now const.  Deleted opcode aliases with exactly matching
constraints, values and flags.  As a side effect of this, the
MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far as I know were
never used, now may need re-examining.
(numopcodes): Now const.
(m68k_opcode_aliases, numaliases): New variables.
(endop): Deleted.
[DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and m68k_opcode_aliases;
update declaration of m68k_opcodes.
1995-03-08 08:20:11 +00:00
Ken Raeburn
82a7c4572a * config/tc-m68k.c (opcode_ptr): Return pointer to const.
(md_begin): Make hash table errors fatal.  Process opcode aliases after main
opcode table.
(md_apply_fix_2, case 4): Recode setting of lower_limit to avoid gcc warning.
1995-03-08 08:10:49 +00:00
Ken Raeburn
029e2524db Avoid bogus assumption that the two parts of the split m68k opcode table
are going to be adjacent in memory.
1995-03-08 07:57:05 +00:00
Ian Lance Taylor
a48769bfbf * elfcode.h (swap_out_syms): Mark an undefined BSF_WEAK symbol as
STB_WEAK rather than STB_GLOBAL.
1995-03-08 05:56:53 +00:00
David Edelsohn
3aa44a1d92 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
(print_insn_arc_{host,graphics,audio}): Likewise.
	(print_insn): Add prototype.
	Delete "+ 4" addition to relative branch address.
	(arc_get_disassembler): New arg `big_p'.  Return little or big
	print fn accordingly.
	* arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
	(arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
	(arc_opval_supported): Likewise.
	* disassemble.c (disassembler): Pass big endian flag to
	arc_get_disassembler.
1995-03-08 05:19:46 +00:00
David Edelsohn
17948aa1bc * emulparams/arcelf.sh (OUTPUT_FORMAT): Change to elf32-littlearc.
(LITTLE_OUTPUT_FORMAT, BIG_OUTPUT_FORMAT): Define.
1995-03-08 05:11:53 +00:00