Commit Graph

57 Commits

Author SHA1 Message Date
Jason Molenda
104c1213b4 import gdb-1999-08-30 snapshot 1999-08-31 01:14:27 +00:00
Jason Molenda
c5aa993b1f import gdb-1999-07-07 post reformat 1999-07-07 20:19:36 +00:00
Jason Molenda
ac9a91a77c import gdb-1999-06-01 snapshot 1999-06-01 15:44:41 +00:00
Jason Molenda
392a587b05 import gdb-1999-05-25 snapshot 1999-05-25 18:09:09 +00:00
Stan Shebs
b83266a0e1 import gdb-19990504 snapshot 1999-05-05 14:45:51 +00:00
Stan Shebs
7a292a7adf import gdb-19990422 snapshot 1999-04-26 18:34:20 +00:00
Stan Shebs
c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs
071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
Mark Alexander
1730ec6b18 * config/sh/tm-sh.h (BELIEVE_PCC_PROMOTION): Define, so that
coffread.c will correctly handle char or short function parameters.
1999-02-15 02:23:56 +00:00
Andrew Cagney
9ddf9aa9be CARP:
Rename REGISTER_NAMES{} -> REGISTER_NAME().
1998-12-10 06:10:03 +00:00
Andrew Cagney
3a0c96a996 CARP:
Rewrite INNER_THAN so that it takes parameters.
1998-11-28 22:53:04 +00:00
Andrew Cagney
679ce73102 CARP: Delete ABOUT_TO_RETURN across all targets. 1998-11-26 11:13:01 +00:00
Andrew Cagney
98760eab33 CARP: Convert macro definitions of USE_STRUCT_CONVENTION into target
specific functions.
1998-11-23 12:35:23 +00:00
Andrew Cagney
d0aba53f38 New commands `set architecture'', show architecture'' and `info
architecture''.  Update SH target to use new target_architecture_hook.
1997-08-28 10:20:21 +00:00
Fred Fish
b25b1c62b0 Minor formatting change (whitespace only). 1997-06-21 03:42:10 +00:00
Fred Fish
cf2b165ede * sh-tdep.c (symfile.h): Include.
(gdb_string.h): Include.
	(sh_fix_call_dummy): Ifdef away, currently unused.
	* config/sh/tm-sh.h (pop_frame): Add prototype.
	* config/sh/tm-sh.h (sh_set_processor_type): Add prototype.
1997-06-13 15:22:08 +00:00
Keith Seitz
1e6479d4d7 Modified Files:
ChangeLog sh-tdep.c config/sh/tm-sh.h
        * config/sh/tm-sh.h: add define for FPSCR_REGNUM
        * sh-tdep.c (sh_show_regs): print out all registers for
        the current processor
1997-06-06 21:47:12 +00:00
Stu Grossman
178b282ba9 * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
	vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
	aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
start-sanitize-v850
	config/v850/v850.mt:
end-sanitize-v850
	Remove -lm.  That's now handled by configure.
1997-04-22 17:13:41 +00:00
Stu Grossman
4ce7ba5188 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
that directory.
	* defs.h utils.c (error warning):  Make message be const.
	* main.c (fputs_unfiltered):  Only send gdb_stdout and gdb_stderr
	to hook.  Otherwise send it to fputs.
	* monitor.c monitor.h (monitor_get_dev_name):  New function.  Does
	the obvious.
	* remote-e7000.c:  Remove debugify stuff.  Change printf, fprintf
	to _filtered forms to make output appear in GUIs.  Replace all
	uses of SERIAL_READCHAR with readchar, which has better error
	checking.
	* (e7000_parse_device):  Add prototype.
	* (readchar):  Improve doc.  Handle random serial errors.
	* (expect):  Disable notice_quit code.  It's busted.  Remove
	serial error handling (it's now handled in readchar).  Remove
	remote_debug echoing.  That's handled in readchar as well.
	* (e7000_parse_device):  Remove serial_flag arg.  It's not
	necessary.
	* (e7000_open):  Split into two pieces.  Second part is
	e7000_start_remote, and is error protected.  Now, when we connect
	to the target, we setup the initial frame and registers so that
	the user gets an immediate indication of where the target is.
	* (gch):  Remove debug output.  That's handled by readchar.
	* (e7000_read_inferior_memory):  Handle errors better.
	* (_initialize_remote_e7000):  Get rid of `<xxx>' things from
	command names.  They show up when doing completion and confuse
	things horribly.
	* ser-e7kpc.c:  Remove the last seven months of brain damage.  Get
	rid of the DLL's since we can access the device directly from Win32s
	and Win95.  Get rid of debugify crud.
	* serial.c:  Remove debugify cruft.
	* (serial_logchar serial_log_command serial_write serial_readchar
	serial_send_break serial_close):  Merge common functionality into
	serial_logchar.  Clean up rest of routines.
	* sparclet-rom.c:  Disembowel.  Leave only download routine.
	Download routine now switches to remote target automatically.
	* top.c (disconnect):  Only define if SIGHUP is defined.  Cleans
	up MSVC/Win32 problem.
	* utils.c (gdb_flush):  Don't call hook unless it's for gdb_stdout
	or gdb_stderr.
	* config/sh/tm-sh.h:  Define TARGET_SH for WinGDB.
	* config/sparc/tm-sparclet.h:  Remove override for prompt.
1997-04-19 01:42:34 +00:00
Michael Snyder
e47d1a4e35 Tue Dec 3 11:38:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* blockframe.c: add macro USE_GENERIC_DUMMY_FRAMES to enable/disable
          code for generic call_dummy frames.
        * config/h8300/tm-h8300.h: turn on USE_GENERIC_DUMMY_FRAMES
        * config/m32r/tm-m32r.h: turn on USE_GENERIC_DUMMY_FRAMES
        * config/sh/tm-sh.h: turn on USE_GENERIC_DUMMY_FRAMES
        * config/v850/tm-v850.h: turn on USE_GENERIC_DUMMY_FRAMES
1996-12-03 19:44:51 +00:00
Michael Snyder
409f64ae05 Wed Nov 27 11:29:06 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* blockframe.c:         ...Remove old-style CALL_DUMMY code...
        * h8300-tdep.c:
        * config/h8300/tm-h8300.h:
start-sanitize-m32r
        * m32r-tdep.c:
        * config/m32r/tm-m32r.h:
end-sanitize-m32r
        * sh-tdep.c:
        * config/sh/tm-sh.h:
start-sanitize-v850
        * v850-tdep.c:
        * config/v850/tm-v850.h:
end-sanitize-v850
1996-11-27 19:31:26 +00:00
Michael Snyder
dc1b349d39 Added target function calls for SH, M32R and H8300.
Added some generic target-independant code for managing call-dummy frames.

Wed Nov 27 10:32:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
        * blockframe.c: Add target-independant support for managing
                        CALL_DUMMY frames on the host side.
        * frame.h:      Declarations for generic CALL_DUMMY frame support.
        * h8300-tdep.c: Add target function calls using generic frame support.
        * config/h8300/tm-h8300.h: config for generic target function calls.
start-sanitize-m32r
        * m32r-tdep.c:  Add target function calls using generic frame support.
        * config/m32r/tm-m32r.h:   config for generic target function calls.
end-sanitize-m32r
        * sh-tdep.c:    Add target function calls using generic frame support.
        * config/sh/tm-sh.h:       config for generic target function calls.
start-sanitize-v850
        * v850-tdep.c:  Add target function calls using generic frame support.
        * config/v850/tm-v850.h:   config for generic target function calls.
end-sanitize-v850
        * valops.c:     ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
                        done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
1996-11-27 19:10:07 +00:00
Michael Snyder
69992fc816 Tue Nov 12 12:16:40 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* sh-tdep.c: Add functionality for target function calls.
        * config/sh/tm-sh.h: Add support for target function calls.
This is a safety check-in: everything works, and there'll be another
clean-up round shortly.
1996-11-12 20:19:17 +00:00
Michael Snyder
4dc42997c3 Fri Nov 8 14:30:23 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/tm-sh.h: Added a missing comma in middle of REGISTER_NAMES list.
1996-11-08 22:31:36 +00:00
Stan Shebs
12ffa10c1d * config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to
be consistent with GCC.
	(FPUL_REGNUM, etc): Renumber to match list changes.
	(ADDR_BITS_REMOVE): Delete.
	* sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
	Rearrange to match REGISTER_NAMES.
	* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
PR 9457
1996-09-20 23:20:58 +00:00
Stan Shebs
311a76b266 move stub.c up to main dir 1996-05-17 20:44:15 +00:00
Stan Shebs
05535e79e9 SH3-E support from Allan Tajii <atajii@hmsi.com>:
* sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for
	float registers.
	(sh3e_reg_names): New register name array.
	(sh_processor_type_table): Add sh3e processor type.
	* config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test.
	(REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for
	full set of registers.
	* remote-e7000.c (want_sh3, want_sh3_nopc): New globals.
	(e7000_fetch_registers, e7000_wait): Use them.
	* sh3-rom.c (sh3_regnames): Add float registers.
	(sh3e_cmds, sh3e_ops): New globals.
	(sh3e_open): New function.
	(_initialize_sh3_rom): Rename from _initialize_sh3, set up
	sh3e target vector.

	* gdbwin.c (reg_order) [TARGET_SH]: Update for SH3-E.
	* initfake.c: Call _initialize_sh3_rom instead of _initialize_sh3.
1996-05-13 18:34:09 +00:00
Stan Shebs
fea17b5545 Support for bi-endian remote breakpoints.
* remote.c (big_break_insn, little_break_insn): New globals.
	(break_insn): Remove.
	(remote_insert_breakpoint, remote_remove_breakpoint): Use own
	code if REMOTE_BREAKPOINT defined, otherwise call memory
	breakpoint functions.
	* config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove.
	(BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define.
1996-04-28 23:43:05 +00:00
Stan Shebs
00dd4fd9ad * infcmd.c (do_registers_info): Ignore anonymous registers.
* sh-tdep.c (set processor): New command to set specific
	processor type.
	(sh_reg_names, sh3_reg_names): Arrays of register names for
	SH and SH3 processors.
	(sh_set_processor_type): New function.
	* sh3-rom.c (sh3_open): Call it.
	(sh3_regname): Add names of all the bank registers.
	(sh3_supply_register): Clean up formatting.
	* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
 	bank registers.
	(REGISTER_NAMES): Add names of bank registers.
	(FP15_REGNUM): Define.
	(REGISTER_VIRTUAL_TYPE): Use it.
	* monitor.c: Clean up some comments.
1996-03-08 02:04:19 +00:00
Jim Wilson
48573afd23 Remove SH3e sanitization. 1996-01-16 20:13:27 +00:00
Steve Chamberlain
6b4fe21d5e * config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt,
config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt:
	srec.o renamed to dsrec.o.
1996-01-05 20:05:36 +00:00
Stu Grossman
ee824ca663 * monitor.c (monitor_load_srec monitor_make_srec): Move all
S-record download code into srec.c.
	* srec.c srec.h:  New files.  Contain S-record loading routines
	formerly in monitor.c.
	* serial.c serial.h:  New routine just like fprintf, but uses
	serial_t instead of FILE *.
	* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
	Don't add four to saved pc (makes things match manual).  Also, fix
	bug where we didn't get pc from stack frame correctly.
	* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL):  Don't add four to
	saved pc.  Real hardware does this for you.
	* sh3-rom.c (sh3_load):  New routine.  Sets up for download then
	calls generic S-record loader.
	* config/h8300/h8300.mt, config/h8500/h8500.mt,
	config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
	Add srec.o to TDEPFILES.
1995-11-14 23:40:18 +00:00
Jim Wilson
a862098505 Hitachi SH3e, patch to make FP registers debuggable. 1995-10-19 23:29:59 +00:00
Stu Grossman
1480482acb * Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h: Add
sh3 monitor support.
	* monitor.c:  Cleanup regexp compilation stuff to make it easier
	to use several regexps.
	* monitor.h:  Get rid of struct rom_cmd_data.  It's no longer used.
	* config/m68k/tm-monitor.h:  Don't redefine NUM_REGS here.  It just
	causes GDB to crash.
1995-10-16 18:51:15 +00:00
Jim Wilson
07846c7a1f * config/sh/sh.mt (SIM): Add -lm. 1995-08-31 19:59:59 +00:00
Fred Fish
6c9638b444 Update FSF address. 1995-08-02 03:41:12 +00:00
Stan Shebs
fb506180fa * config/h8300/h8300.mt: Renamed from h8300hms.mt.
* config/h8500/h8500.mt: Renamed from h8500hms.mt.
	* config/z8k/z8k.mt: Renamed from z8ksim.mt.
	* configure, configure.in: Update to reflect renamings.

	* remote-sim.c (sim): New command, passes commands to simulator.
	(simulator_command): New function.
	(gdbsim_ops): Clean up.
	* remote-sim.h (sim_do_command): Declare.
	* sh-tdep.c (memory_size): Remove command.

	* Makefile.in (SIM, SIM_OBS): New variables.
	(CLIBS, CDEPS): Add value of SIM.
	(DEPFILES): Add value of SIM_OBS

	* config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
	config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
	config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
	define in SIM_OBS and SIM.
	config/sparc/sp64sim.mt (SIMFILES): Remove.

	* remote-z8k.c: Remove, was superseded by remote-sim.c
	* Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
1995-07-01 00:22:57 +00:00
Steve Chamberlain
5f2f280941 * remote-e7000.c (HARD_BREAKPOINTS): Reenable.
(BC_BREAKPOINTS): Disable.
	* sh-tdep.c (print_insn): Cope with big and little endian machines.
	* sh/sh.mt: Use libsim.a
	* sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New
	(BREAKPOINT): Changed to be byteorder independent.
1994-11-24 05:59:34 +00:00
Stan Shebs
b5bfe299de * Makefile.in (ANNOTATE_OBS): New definition.
(COMMON_OBS): Add exec.o.
	(annotate.o): Remove extra compile rule.
	* config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
	everywhere.
1994-10-13 02:28:24 +00:00
Stan Shebs
ac57e5adda * infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
defined.
	* values.c (unpack_double) [INVALID_FLOAT]: Ditto.
	* mips-tdep.c (mips_print_register): Don't test float validity.
	* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
	config/arm/tm-arm.h, config/convex/tm-convex.h,
	config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
	config/i386/tm-i386v.h, config/i386/tm-sun386.h,
	config/i960/tm-i960.h, config/m68k/tm-m68k.h,
	config/m88k/tm-m88k.h, config/mips/tm-mips.h,
	config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
	config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
	config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
	config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
	Remove definition.
1994-09-25 21:13:24 +00:00
Steve Chamberlain
e4483b9901 * config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
fields.
1994-09-09 00:43:50 +00:00
Steve Chamberlain
7f4b5f94dd New file. (stan said I could put it here) 1994-08-04 23:59:24 +00:00
Steve Chamberlain
bffce4c6b8 Use e7000-pc stuff. 1994-06-27 17:17:27 +00:00
Steve Chamberlain
2e2b27790c * config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode. 1994-04-15 18:41:05 +00:00
Steve Chamberlain
826e69cf2a Get REGISTER_TYPE right. 1994-02-05 00:36:32 +00:00
Jim Kingdon
f4f0d17487 * valops.c (call_function_by_hand, push_word), defs.h (push_word),
convex-xdep.c, m88k-nat.c, i386m3-nat.c, mips-tdep.c, mipsm3-nat.c,
	ns32km3-nat.c, remote-bug.c, m88k-tdep.c, remote-hms.c, remote-mips.c,
	config/gould/tm-np1.h, hppa-tdep.c (hppa_fix_call_dummy), remote-vx.c:
	Use REGISTER_SIZE, unsigned LONGEST, and
	{store,extract}_unsigned_integer, instead of sizeof
	(REGISTER_TYPE) and REGISTER_TYPE.
	* All tm.h files: Change REGISTER_TYPE to REGISTER_SIZE.
	* hppa-tdep.c (pa_print_fp_reg): Remove unused variable val.

	* Makefile.in (ALLDEPFILES): Remove i386ly-nat.c and m68kly-nat.c.
	Add lynx-nat.c.
1993-12-26 18:10:22 +00:00
Steve Chamberlain
b4d3d0e5de * config/sh/sh.h (NOP): Define NOP insn. 1993-12-12 00:05:54 +00:00
Steve Chamberlain
2f5e17369c Use remote-e7000.c 1993-11-15 23:29:56 +00:00
Peter Schauer
ad09cb2bd3 * findvar.c (value_of_register, value_from_register),
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
	valops.c (value_assign):   Use REGISTER_CONVERT_TO_* only if
	REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
	Pass desired type to REGISTER_CONVERT_TO_*.

	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
	Pass length of desired type to store/extract_floating.
	* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
	config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
	config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
	Use extract_floating and store_floating with length of desired type.
	* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE):  Add type
	parameter to REGISTER_CONVERT_*.

	* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
	config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
	config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
	config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
	config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
	config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
	config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL):  Remove
	versions for which REGISTER_CONVERTIBLE is always false.
	* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
	Remove, no longer used.

	* alpha-tdep.c (alpha_register_convert_to_raw,
	alpha_register_convert_to_virtual):  New routines to handle
	the different raw formats in alpha floating point registers.
	* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use them.
1993-11-02 21:51:10 +00:00
Jim Kingdon
114221b5a4 * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
about SHIFT_INST_REGS.

	* exec.c (exec_file_command): Set text_end based on all code readonly
	sections, not just ".text".

	* defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
	config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
	z8k-tdep.c: Remove all references to ADDR_BITS_SET.
	* config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.

	* config/m88k/tm-m88k.h: Add definitions for calling functions.
1993-09-23 17:16:35 +00:00