Recognize power9 and a few other insns from older machines. Fixes
linker complaints like "toc optimization is not supported for
0xf4090002 instruction". 0xf4090002 is stxsd v0,0(r9)
bfd/
* elf64-ppc.c (ok_lo_toc_insn): Add r_type param. Recognize
lq,lfq,lxv,lxsd,lxssp,lfdp,stq,stfq,stxv,stxsd,stxssp,stfdp.
Don't match lmd and stmd.
ld/
* testsuite/ld-powerpc/tocopt7.s,
* testsuite/ld-powerpc/tocopt7.out,
* testsuite/ld-powerpc/tocopt7.d: New test.
* testsuite/ld-powerpc/tocopt8.s,
* testsuite/ld-powerpc/tocopt8.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run them.
bfd/ChangeLog:
2016-12-05 Alyssa Milburn <amilburn@zall.org>
* elfxx-sparc.c: Do not stop processing relocations after
partially relaxing a call with WDISP30.
ld/ChangeLog:
2016-12-05 Alyssa Milburn <amilburn@zall.org>
* testsuite/ld-sparc/wdispcall.s: New file.
* testsuite/ld-sparc/wdispcall.dd: Likewise.
* testsuite/ld-sparc/sparc.exp: Run new test.
Lots of fixes for the compatibility code that handles linking of
-mcall-aixdesc code (or that generated by 12 year old gcc) with
current ELFv1 ABI code.
1) A reference to a dot-symbol in an object file wasn't satisfied by a
function descriptor in later object files.
2) The as-needed code had bit-rotted; Shared libs now need a strong
reference to be counted as needed.
3) --gc-sections involving dot-symbols was broken, needing
func_desc_adjust to be run early and lots of other fixes.
bfd/
* elf64-ppc.c (struct ppc_link_hash_entry): Delete "was_undefined".
(struct ppc_link_hash_table): Delete "twiddled_syms". Add
"need_func_desc_adj".
(lookup_fdh): Link direct fdh sym via oh field and set flags.
(make_fdh): Make strong and weak undefined function descriptor
symbols.
(ppc64_elf_merge_symbol): New function.
(elf_backend_merge_symbol): Define.
(ppc64_elf_archive_symbol_lookup): Don't test undefweak for fake
function descriptors.
(add_symbol_adjust): Don't twiddle symbols to undefweak.
Propagate more ref flags to function descriptor symbol. Make
some function descriptor symbols dynamic.
(ppc64_elf_before_check_relocs): Only run add_symbol_adjust for
ELFv1. Set need_func_desc_adj. Don't fix undefs list.
(ppc64_elf_check_relocs): Set non_ir_ref for descriptors.
Don't call lookup_fdh here.
(ppc64_elf_gc_sections): New function.
(bfd_elf64_bfd_gc_sections): Define.
(ppc64_elf_gc_mark_hook): Mark descriptor.
(func_desc_adjust): Don't make fake function descriptor syms strong
here. Exit earlier on non-dotsyms. Take note of elf.dynamic
flag when deciding whether a dynamic function descriptor might
be needed. Transfer elf.dynamic and set elf.needs_plt. Move
plt regardless of visibility. Make descriptor dynamic if
entry sym is dynamic, not for other cases.
(ppc64_elf_func_desc_adjust): Don't run func_desc_adjust if
already done.
(ppc64_elf_edit_opd): Use oh field rather than lookup_fdh.
(ppc64_elf_size_stubs): Likewise.
(ppc_build_one_stub): Don't clear was_undefined. Only set sym
undefweak if stub symbol is defined.
(undo_symbol_twiddle, ppc64_elf_restore_symbols): Delete.
* elf64-ppc.h (ppc64_elf_restore_symbols): Don't declare.
ld/
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't call
ppc64_elf_restore_symbols.
* testsuite/ld-powerpc/dotsym1.d: New.
* testsuite/ld-powerpc/dotsym2.d: New.
* testsuite/ld-powerpc/dotsym3.d: New.
* testsuite/ld-powerpc/dotsym4.d: New.
* testsuite/ld-powerpc/dotsymref.s: New.
* testsuite/ld-powerpc/nodotsym.s: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
PR ld/20868
bfd * elfnn-aarch64.c (elfNN_aarch64_tls_relax): Use 32-bit accesses
to the GOT when operating in 32-bit mode.
ld * testsuite/ld-aarch64/tls-relax-gd-ie-ilp32.d: New test.
* testsuite/ld-aarch64/relocs-ilp32.ld: Linker script for the new
test.
* testsuite/ld-aarch64/aarch64-elf.exp: Run the new test.
Remove duplicate definition of TEMPLATE_NAME, only the last of these
will have any effect, so this should result in no visible changes to the
user.
ld/ChangeLog:
* emulparams/arclinux_prof.sh: Remove duplicate TEMPLATE_NAME.
A hidden versioned symbol in executable should be forced local if it is
locally defined, not referenced by shared library and not exported. We
must do it before _bfd_elf_link_renumber_dynsyms.
bfd/
* elflink.c (_bfd_elf_fix_symbol_flags): Hide hidden versioned
symbol in executable.
(elf_link_output_extsym): Don't change bind from global to
local when linking executable.
ld/
* testsuite/ld-elf/indirect.exp: Add a test for PR 18720.
* testsuite/ld-elf/pr18720.rd: New file.
bfd/
PR target/20737
* elf32-arm.c (elf32_arm_final_link_relocate): Bind defined symbol
locally in PIE.
ld/
* testsuite/ld-arm/pie-bind-locally-a.s: New test source.
* testsuite/ld-arm/pie-bind-locally-b.s: Likewise.
* testsuite/ld-arm/pie-bind-locally.d: New testcase.
* testsuite/ld-arm/arm-elf.exp: Run new testcase.
PR ld/20815
bfd * elf.c (elf_modify_segment_map): Allow empty LOAD segments if
they contain the program headers.
(_bfd_elf_map_sections_to_segments): If the linker created the
PHDR segment then always attempt to include it in a LOAD segment.
(assign_file_positions_for_non_load_sections): Allow LOAD segments
to overlap PHDR segments.
(phdr_sorter): New function. Sorts program headers.
(assign_file_positions_except_relocs): Sort the program headers
before writing them out. Issue an error if the PHDR segment is
not covered by a LOAD segment, unless the backend allows it.
* elf-bfd.h (struct elf_backend_data): Add
elf_backend_allow_non_load_phdr.
* elfxx-target.h (elf_backend_allow_non_load_phdr): Provide
default definition that returns FALSE.
(elfNN_bed): Initialise the elf_backend_allow_non_load_phdr
field.
* elf64-hppa.c (elf64_hppa_allow_non_load_phdr): New function.
Returns TRUE.
(elf_backend_allow_non_load_phdr): Define.
* elf-m10300.c (_bfd_mn10300_elf_size_dynamic_sections): Do not
place the interpreter string into the .interp section if the
nointerp flag is set in the link info structure.
* elf32-arc.c (elf_arc_size_dynamic_sections): Likewise.
* elf32-score7.c (score_elf_final_link_relocate): Allow for the
_gp symbol not being part of the output.
binutils* readelf.c (process_program_headers): Check PT_LOAD and PT_PHDR
segments for validity.
ld * ld.texinfo: Note that PT_TLS can be used as a segment type.
* testsuite/ld-discard/discard.ld: Add space for program headers.
* testsuite/ld-elf/flags1.ld: Likewise.
* testsuite/ld-elf/maxpage3.t: Likewise.
* testsuite/ld-elf/noload-1.t: Likewise.
* testsuite/ld-elf/orphan.ld: Likewise.
* testsuite/ld-elf/overlay.t: Likewise.
* testsuite/ld-elf/pr14052.t: Likewise.
* testsuite/ld-elf/pr19539.t: Likewise.
* testsuite/ld-elf/provide-hidden-1.ld: Likewise.
* testsuite/ld-elf/provide-hidden-s.ld: Likewise.
* testsuite/ld-elf/weak-dyn-1.ld: Likewise.
* testsuite/ld-i386/pr19539.t: Likewise.
* testsuite/ld-scripts/defined.t: Likewise.
* testsuite/ld-scripts/defined6.t: Likewise.
* testsuite/ld-scripts/dynamic-sections.t: Likewise.
* testsuite/ld-scripts/empty-aligned.t: Likewise.
* testsuite/ld-scripts/provide-2.t: Likewise.
* testsuite/ld-scripts/provide-4.t: Likewise.
* testsuite/ld-vax-elf/plt-local.ld: Likewise.
* testsuite/ld-x86-64/pr19539.t: Likewise.
* testsuite/ld-elf/ehdr_start-missing.d: Do not initialise the
dynamic linker.
* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
* testsuite/ld-elf/elf.exp (pr14170, pr17068): Likewise.
* testsuite/ld-elf/loadaddr1.d: Update expected readelf output.
* testsuite/ld-elf/noload-2.d: Likewise.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-scripts/phdrs3a.d: Likewise.
* testsuite/ld-scripts/size-2.d: Likewise.
* testsuite/ld-elf/group.ld: Add program headers.
* testsuite/ld-elf/overlay.d: Skip for SPU.
* testsuite/ld-elf/flags1.d: Skip for RX.
* testsuite/ld-elf/pr19162.d: Skip for HPPA64.
* testsuite/ld-elf/pr19539.d: Skip for ALPHA.
* testsuite/ld-scripts/empty-orphan.t: Update program headers.
* testsuite/ld-scripts/size-2.t: Likewise.
Fix issues with diff relocs that have a negative value
i.e. sym2 - sym1 where sym2 is lesser than sym1.
The assembler generates a diff reloc with symbol as start of section
and addend as sym2 offset, and encodes assembly time difference at
the reloc offset.
The existing relaxation logic adjusts addends if the relaxed insn lies
between symbol and addend. That doesn't work for diff relocs where
sym2 is less than sym1 *and* the relaxed insn happens to be between
sym2 and sym1.
Fix the problems by
1. Using signed handling of the difference value (bfd_signed_vma instead
of bfd_vma, bfd_{get,set}_signed_xxx instead of bfd_{get,set}_xxx).
2. Not assuming sym2 is bigger than sym1. It instead computes the actual
addresses and sets the lower and higher addresses as start and end
addresses respectively and then sees if insn is between start and end.
3. Creating a new function elf32_avr_adjust_reloc_if_spans_insn to
centralize reloc adjustment, and ensuring diff relocs get adjusted
correctly even if their sym + addend doesn't overlap a relaxed insn.
It also removes a redundant variable did_pad. It is never set if
did_shrink is TRUE, and the code does a early return if did_shrink is
FALSE.
bfd/ChangeLog
2016-11-15 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20789
* bfd/elf32-avr.c (elf32_avr_adjust_diff_reloc_value): Do signed
manipulation of diff value, and don't assume sym2 is less than sym1.
(elf32_avr_adjust_reloc_if_spans_insn): New function.
(elf32_avr_relax_delete_bytes): Use elf32_avr_adjust_diff_reloc_value,
and remove redundant did_pad.
ld/ChangeLog
2016-11-15 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
PR ld/20789
* ld/testsuite/ld-avr/pr20789.d: New test.
* ld/testsuite/ld-avr/pr20789.s: New test.
Since "-z now" replaces PLT with GOT PLT, we should also check GOT PLT
for R_X86_64_PLTOFF64 relocation.
bfd/
PR ld/20800
* elf64-x86-64.c (elf_x86_64_relocate_section): Also check
plt_got.offset for R_X86_64_PLTOFF64.
ld/
PR ld/20800
* testsuite/ld-x86-64/pr20800a.S: New file.
* testsuite/ld-x86-64/pr20800b.S: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run PR ld/20800 test.
bfd/
PR target/20737
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Bind defined
symbol locally in PIE.
ld/
* testsuite/ld-aarch64/pie-bind-locally-a.s: New test source.
* testsuite/ld-aarch64/pie-bind-locally-b.s: Likewise.
* testsuite/ld-aarch64/pie-bind-locally.d: New testcase.
* testsuite/ld-aarch64/aarch64-elf.exp: Run new testcase.
PR ld/20784
* emultempl/elf32.em (search_needed): Fix infinite loop when
unable to process a token. Add support for curly braced enclosed
tokens.
* ld.texinfo (--rpath-link): Document supprot for $ORIGIN and
$LIB.
* emultempl/elf32.em (search_needed): Remove use of getauxval and
inclusion of <sys/auxv.h>. Replace support for $PLATFORM with a
warning message.
* configure.ac (AC_CHECK_FUNCS): Remove getauxval.
* configure: Regenerate.
* config.in: Regenerate.
Currently the EXCLUDE_FILE linker script construct can only be used
within the input section list, and applied only to the section pattern
immediately following the EXCLUDE_FILE. For example:
*.o (EXCLUDE_FILE (a.o) .text .rodata)
In this case all sections matching '.text' are included from all files
matching '*.o' but not from the file 'a.o'. All sections matching
'.rodata' are also included from all files matching '*.o' (incluing from
'a.o').
If the user wants to restrict the inclusion of section '.rodata' so that
this too is not taken from the file 'a.o' then the above example must be
extended like this:
*.o (EXCLUDE_FILE (a.o) .text EXCLUDE_FILE (a.o) .rodata)
However, due to the internal grammar of the linker script language the
snippet 'EXCLUDE_FILE (a.o) .text' is parsed by a pattern called
'wildcard_spec'. The same 'wildcard_spec' pattern is also used to parse
the input file name snippet '*.o' in the above examples. As a result of
this pattern reuse within the linker script grammar then the following
is also a valid linker script construct:
EXCLUDE_FILE (a.o) *.o (.text .rodata)
However, though the linker accepts this without complaint the
EXCLUDE_FILE part is silently ignored and has no effect.
This commit takes this last example and makes it a useful, valid,
construct. The last example now means to include sections '.text' and
'.rodata' from all files matching '*.o' except for the file 'a.o'.
If the list of input sections is long, and the user knows that the file
exclusion applies across the list then the second form might be a
clearer alternative to replicating the EXCLUDE_FILE construct.
I've added a set of tests for EXCLUDE_FILE to the linker, including
tests for the new functionality.
ld/ChangeLog:
* ldlang.h (struct lang_wild_statement_struct): Add
exclude_name_list field.
* ldlang.c (walk_wild_file_in_exclude_list): New function.
(walk_wild_consider_section): Use new
walk_wild_file_in_exclude_list function.
(walk_wild_file): Add call to walk_wild_file_in_exclude_list.
(print_wild_statement): Print new exclude_name_list field.
(lang_add_wild): Initialise new exclude_name_list field.
* testsuite/ld-scripts/exclude-file-1.d: New file.
* testsuite/ld-scripts/exclude-file-1.map: New file.
* testsuite/ld-scripts/exclude-file-1.t: New file.
* testsuite/ld-scripts/exclude-file-2.d: New file.
* testsuite/ld-scripts/exclude-file-2.map: New file.
* testsuite/ld-scripts/exclude-file-2.t: New file.
* testsuite/ld-scripts/exclude-file-3.d: New file.
* testsuite/ld-scripts/exclude-file-3.map: New file.
* testsuite/ld-scripts/exclude-file-3.t: New file.
* testsuite/ld-scripts/exclude-file-4.d: New file.
* testsuite/ld-scripts/exclude-file-4.map: New file.
* testsuite/ld-scripts/exclude-file-4.t: New file.
* testsuite/ld-scripts/exclude-file-a.s: New file.
* testsuite/ld-scripts/exclude-file-b.s: New file.
* testsuite/ld-scripts/exclude-file.exp: New file.
* ld.texinfo (Input Section Basics): Update description of
EXCLUDE_FILE to cover the new features.
* NEWS: Mention new EXCLUDE_FILE usage.
When creating object files during testing, base the name of the object
file on the name of the source file, rather than using dump0.o,
dump1.o, etc. There's a few places where we have multiple source
files with the same name but in different directories, in these cases,
even after this change, we still add a numerical suffix to make the
object file names unique. So if we have 'foo/src.s' and 'bar/src.s',
we will create object files 'src.o' and 'src1.o'.
Update the few tests that hard code the object file name into the
expected test results.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (run_dump_test): Use object file names
based on the original source file name.
* testsuite/ld-discard/extern.d: Update object file names.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
* testsuite/ld-elf/orphan-8.map: Likewise.
Add the xc16x-elf target to the list of targets that do not support
the -shared option. Being missing from this list was causing the
linker to add '-z norelro' to the link line of many tests, which in
turn caused these tests to fail.
ld/ChangeLog:
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Add
xc16x-*-elf to the list of targets that don't support -shared.
Rename file_NAME_list to section_NAME_list in the linker's grammar
file. This rename reflects how the pattern is now being used, and makes
the grammar easier to understand.
There should be no functional change after this commit.
ld/ChangeLog:
* ldgram.y: Rename file_NAME_list to section_NAME_list
throughout.
2016-10-31 Thomas Preud'homme <thomas.preudhomme@arm.com>
ld/
* ldmain.c (add_archive_element): Initialize input->header.type.
* plugin.c (plugin_maybe_claim): Assert the statement is an input
statement.
See https://sourceware.org/ml/binutils/2016-07/msg00091.html
This patch stop --gc-sections elf_gc_sweep_symbol localizing symbols
that ought to remain global.
The difficulty with always descending into output section statements
is that symbols defined by the script in such statements don't have
a bfd section when lang_do_assignments runs early in the link process.
There are two approaches to curing this problem. Either we can
create the bfd section early, or we can use a special section. This
patch takes the latter approach and uses bfd_und_section. (Creating
bfd sections early results in changed output section order, and thus
lots of testsuite failures. You can't create all output sections
early to ensure proper ordering as KEEP then stops empty sections
from being stripped.)
The wrinkle with this approach is that some code that runs at
gc-sections time needs to be made aware of the odd defined symbols
using bfd_und_section.
bfd/
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Handle symbols
defined temporarily with bfd_und_section.
* elflink.c (_bfd_elf_gc_keep): Don't set SEC_KEEP for bfd_und_section.
* elfxx-mips.c (mips_elf_local_pic_function_p): Exclude defined
symbols with bfd_und_section.
ld/
* ldlang.c (lang_do_assignments_1): Descend into output section
statements that do not yet have bfd sections. Set symbol section
temporarily for symbols defined in such statements to the undefined
section. Don't error on data or reloc statements until final phase.
* ldexp.c (exp_fold_tree_1 <etree_assign>): Handle bfd_und_section
in expld.section.
* testsuite/ld-mmix/bpo-10.d: Adjust.
* testsuite/ld-mmix/bpo-11.d: Adjust.
