to source, since previous behavior of defaulting to gdb init file
was troublesome and undocumented.
* printcmd.c (disassemble_command): Add missing '{}' pair to
else with two statements. Bug reported by Stephane Tsacas
<slt@isoft.fr>.
* symtab.c (find_pc_line): Don't complain about zero length or
negative length line numbers for the moment, since we may not own
the terminal when called, such as when single stepping. (FIXME)
* language.h (CAST_IS_CONVERSION): True if current language is
C++ as well as C. Fix from Peter Schauer.
* environ.c (get_in_environ, set_in_environ, unset_in_environ):
Use STREQN macro rather than bare '!strncmp()'.
* environ.c (unset_in_environ): Avoid use of memcpy on
overlapping memory regions, as suggested by Paul Eggert
<eggert@twinsun.com>.
* c-exp.y (%union struct): Remove unused ulval as suggested
by Paul Eggert <eggert@twinsun.com>.
expected fail for i486-*-* that misses the marker2 function.
* gdb.t10/crossload.exp (bfddefault): Allow successful
recognition of a format to pass even if no symbols are found.
Explicitly catch failures where the format is not recognized
or is ambiguous, and add the reason to the fail message.
* gdb.t10/crossload.exp (bfdexplicit): Catch failure where
the cause is and invalid target and add reason to failure message.
* gdb.t10/crossload.exp: Fix bfd target names for elf32-m68k,
elf32-i386, elf32-sparc, and elf32-i860.
* gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
Set up expected failure for 'filename'::variable scope resolution,
which is now apparently broken on all targets.
* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
gdb.t23/templates.exp: Change failure for missing binfile into
just a warning.
gdb.t21/demangle.exp: Change all cfront references to 'arm'
references.
(pollquit): New function to poll keyboard for user interrupt,
called from QUIT.
* xm-go32.h (QUIT): Define to call pollquit.
* h8300-tdep.c (examine_prologue): Use correct value for number of
registers.
(examine_tag): Use it.
(read_register_stack): Only look in the local registers for a
memory address if it's between rfb and rsp; go to memory otherwise.
* command.c (do_setshow_command): var_uintegers are unsigned.
* sparc-tdep.c (save_insn_opcodes, restore_insn_opcodes):
unsigned, since they use hex values with the high bit set.
size field a define (DBX_STRINGTAB_SIZE_SIZE). Ensure that the
offset to the string table is nonzero and handle the nonexistant
string table case, should it occur. Ensure that the string table
size read from the file is reasonable, with a minimum lower bound
of DBX_STRINGTAB_SIZE_SIZE instead of zero.
(FLAGS_TO_PASS): Added CXX and CXXFLAGS.
(CC_FOR_TARGET, CXX, CXX_FOR_TARGET): New variables.
(TARGET_FLAGS_TO_PASS): New variable.
(SUBDIRS): Added testsuite.
(all): Build testsuite using TARGET_FLAGS_TO_PASS, so that
testsuite is compiled with CC_FOR_TARGET rather than CC.
reported by mycroft@gnu.ai.mit.edu.
(Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
* configure.in (vax-*-ultrix2*): New triplet.
* config/vaxult2.mh: New file.
* xm-vaxult2.h: New file.
* demangle.c: Change all references to cfront to ARM, since the
actual algorithm is the one specified in the Annotated Reference
Manual. This was confusing users into thinking that full cfront
support was implemented.
* dwarfread.c (CFRONT_PRODUCER): Remove, was never really used.
* eval.c (evaluate_subexp): For STRUCTOP_PTR pass the arg type
directly to lookup_struct_elt_type, which will do the
dereferencing itself.
* gdbtypes.c (lookup_struct_elt_type): Expand comments. Fix
NULL dereferencing bug for unnamed structs, comment out
questionable code.
so that it only happens on big-endian targets; so that it only
happens if the short or char argument is aligned on an int
boundary; and so that it changes the location, rather than the
type, of the argument. These changes tend to parallel similar
(old) changes in stabsread.c.
* coffread.c (coff_read_enum_type): Use the specified size for
enums, don't assume that they are int-sized.
* c-valprint.c (c_val_print): Don't assume enums are the same as
ints.
Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*. Changed to use CC, CXX
instead of CC_FOR_TARGET, CXX_FOR_TARGET. Added mostlyclean and
distclean targets. Built executables via .o files. Adjusted
tests to account for source files in $(srcdir) rather than
$(objdir).
* lib/gdb.exp (runto): Don't expect () after the function name,
because it may have arguments.
of demangled name fields to NULL if no demangling exists for
a symbol. SYMBOL_INIT_LANGUAGE_SPECIFIC does this for new
symbols if their language is known at the time they are created,
but sometimes the language is not known until later.
gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
expected failures for mips-idt-* and mips-sgi-*.
* gdb.t00/default.exp (attach): Kill process if requested.
* gdb.t00/help.exp (help target core, help target): Accept a gdb
that does not read core files.
* gdb.t01/run.exp: Removed checks for exit status code.
* gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
it is linked in.
* gdb.t03/ptype.exp: Increase timeout when calling malloc.
* gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
appropriate, rather than doing it by hand.
* gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
execution.
* gdb.t10/crossload.exp: Kill existing program if needed.
* gdb.t15/funcargs.exp: Use delete_breakpoints function where
appropriate, rather than doing it by hand. Always increase
timeout for this test, not just for VxWorks.
* gdb.t31/chillvars.exp (test_structs): New proc to test printing
of Chill STRUCT types and STRUCT values.
* gdb.t31/chillvars.exp (test_strings): Expect "CHAR" now, rather
than "char".
* gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
struct2): New struct definitions and initializations to test
simple Chill STRUCT types.
**** end-sanitize-chill ****
* ch-typeprint.c (chill_print_type_base): Name changed to
chill_type_print_base to match pattern for C and C++ names.
* ch-typeprint.c (chill_print_type): Change "char" to "CHAR"
to be consistent with other usages.
* ch-typeprint.c (chill_type_print_base): Add support for
printing Chill STRUCT types.
* ch-valprint.c: Include values.h.
* ch-valprint.c (chill_print_value_fields): New function and
prototype for printing Chill STRUCT values.
* ch-valprint.c (chill_val_print): Fix call to val_print_string
that was being called with two args instead of three.
* ch-valprint.c (chill_val_print): Call chill_print_value_fields
to print Chill STRUCT values.
**** end-sanitize-chill ****
the null byte at the end of strings.
* gdb.t00/default.exp: Make show version insensitive to copyright
date.
* gdb.t16/in-gdbme.c (ctable1, ctable2): Make explicitly unsigned
to avoid dependencies on target char signedness.
* gdb.t16/printcmds.exp: Update expected results for explicitly
unsigned char.
* gdb.t16/printcmds.exp: Remove setup_xfails for i960 that should
now work.
* gdb.t21/demangle.exp: Add many more patterns for template
demangling, most of them being expected failures.
* gdb.t21/demangle.exp (proc demangle): Quote the demangled
string we are matching for, to match on the whole string.
* gdb.t21/demangle.exp: Add many new test strings to demangle,
and fix a whole bunch that had incorrect expected output but were
passing anyway because of the bug in "proc demangle".
**** start-sanitize-chill ****
* gdb.t31/chillvars.exp: Remove setup_xfail for printing string
type.
* gdb.t31/in-gdbme.ch: Uncomment string4, now compiles.
**** end-sanitize-chill ****
change that now emits debugging info with the type long for Chill
longs.
* dwarfread.c (read_tag_string_type): Rewrite to allow forward
references of TAG_string_type DIEs in user defined types.
protocol.
* config/idt.mt: New file; uses remote-mips.c
* configure.in (mips-idt-ecoff): New target; uses idt.mt.
* mips-tdep.c (mips_fpu): New variable; controls use of MIPS
floating point coprocessor.
(mips_push_dummy_frame): If not mips_fpu, don't save floating
point registers.
(mips_pop_frame): If not mips_fpu, don't restore floating point
registers.
(_initialize_mips_tdep): New function; let the user reset mips_fpu
variable.
* tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not
mips_fpu, don't use fp0 as floating point return register.
(FIX_CALL_DUMMY): If not mips_fpu, don't save floating point
registers.
Also added remote-mips.c to .Sanitize file.
Migrated dejagnu testcases and support files for testing nm to
gdb/testsuite from deja-gnu. These files were moved "as is"
with no modifications. This migration is part of a major overhaul
of dejagnu. The modifications to these testcases, etc., which
will allow them to work with the new version of dejagnu will be
made in a future update.