* config/obj-coffbfd.c (fill_section): Don't set vaddr here.
(write_object_file): Set it here instead, so that fixup_segment
can see the correct value.
* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
* tc-i386.h: Define SUB_SEGMENT_ALIGN.
* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
Removed some unneeded files.
obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
tc-m68k.c (md_assemble): 68000+68881 is okay -- could be emulating.
support when using /opt/SUNWspro/SC2.0/acc.
Tue Nov 10 09:50:25 1992 Ian Lance Taylor (ian@cygnus.com)
* obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
section.
* atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
comment_chars, line_comment_chars and line_seperator_chars
consistently const, and always initialized them. Included read.h.
* Support for i386-sysv.
obj-coffbfd.c (do_relocs_for, write_object_file): set segment
addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
be used to set them all to zero as was done before.
(fill_section): segment addresses now set in write_object_file.
(fill_section): Don't set STYP_NOLOAD for .bss section.
(fixup_segment): 386 uses strange common symbol format.
tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
compatibility with SVR3.2 linker.
* obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
sections starting from zero, rather than making them consecutive.
This makes subsequent reloc calculations easier, esp if the
object format doesn't understand addends. (obj_coff_lcomm): (maybe
temporarily) allocate lcomm in .data rather than in .bss. It
seems that some tools can't cope with a non-zero sized bss
before linkage.
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Now compiles for sparc aout, 68k aout (MRI and MIT syntax),
29k coff.
So far works as replacement for sparc and 68k /bin/as.
* listing.c,listing.h: support for new listings, and more for forgiving
when lied to about where linenumbers are.
* config/obj-coffbfd.c (do_linenos_for): relocate line numbers
correctly.
* config/tc-h8300.c, config/tc-h8300.h: Too Many bug fixes
* config/tc-m68k.h, config/tc-sparc.h: Override default
listing options to give better effect.
