2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
(arm_force_mode_string, arm_show_fallback_mode)
(arm_show_force_mode): New.
(arm_pc_is_thumb): Honor fallback-mode and force-mode. Use
arm_frame_is_thumb.
(_initialize_arm_tdep): Add "set arm fallback-mode"
and "set arm force-mode".
* NEWS: Document new commands.
* gdb.texinfo (ARM): Document set/show arm fallback-mode
and set/show arm force-mode.
Pedro Alves <pedro@codesourcery.com>
Based on work by Jan Kratochvil <jan.kratochvil@redhat.com> and Jeff
Johnston <jjohnstn@redhat.com>.
* NEWS: Mention attach to stopped process fix.
* infcmd.c (detach_command, disconnect_command): Discard the thread
list.
* infrun.c (handle_inferior_event): Do not ignore non-SIGSTOP while
attaching. Use signal_stop_state.
(signal_stop_state): Check stop_soon.
* linux-nat.c (kill_lwp): Declare earlier.
(pid_is_stopped, linux_nat_post_attach_wait): New.
(lin_lwp_attach_lwp): Use linux_nat_post_attach_wait. Update
comments.
(linux_nat_attach): Use linux_nat_post_attach_wait.
(detach_callback, linux_nat_detach): Improve handling for signalled
processes.
(linux_nat_pid_to_str): Always print out the LWP ID if it differs
from the process ID.
* Makefile.in (infcmd.o): Update.
2008-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdb.threads/attach-into-signal.c, gdb.threads/attach-into-signal.exp,
gdb.threads/attach-stopped.c, gdb.threads/attach-stopped.exp,
gdb.threads/attachstop-mt.c, gdb.threads/attachstop-mt.exp: New.
of "library". Add "section" element and describe its attributes.
* solib-target.c (struct lm_info): Add section_bases member.
(library_list_start_segment): Error out if seen a section element.
(library_list_start_section): New.
(library_list_end_library): New.
(solib_target_free_library_list): Free section_bases.
(section_attributes): New.
(library_children): Make "segment" optional. Add "section" child.
(library_list_children): Register library_list_end_library.
(solib_target_relocate_section_addresses): Handle section bases.
* NEWS: Mention new qXfer:libraries:read section offsets support.
doc/
* gdb.texinfo (Library List Format): Update to mention the
possibility to pass section addresses instead of segment
addresses.
* NEWS: Document "set exec-wrapper" and the gdbserver --wrapper
argument. Gather all gdbserver features together.
* fork-child.c (exec_wrapper): New variable.
(fork_inferior): Use it.
(startup_inferior): Skip an extra trap if using "set exec-wrapper".
(unset_exec_wrapper_command, _initialize_fork_child): New.
* gdb.texinfo (Starting): Document "set exec-wrapper".
(Server): Document gdbserver --wrapper.
* server.c (wrapper_argv): New.
(start_inferior): Handle wrapper_argv. If set, expect an extra
trap.
(gdbserver_usage): Document --wrapper.
(main): Parse --wrapper.
(update_watchpoint): Set and clear val_valid. Use
fetch_watchpoint_value. Handle unreadable values on the
value chain. Correct check for user-requested array watchpoints.
(breakpoint_init_inferior): Clear val_valid.
(watchpoint_value_print): New function.
(print_it_typical): Use it. Do not free or clear old_val. Print
watchpoints even if old_val == NULL.
(watchpoint_check): Use fetch_watchpoint_value. Check for values
becoming readable or unreadable.
(watch_command_1): Use fetch_watchpoint_value. Set val_valid.
(do_enable_watchpoint): Likewise.
* breakpoint.h (struct breakpoint): Update comment for val. Add
val_valid.
* NEWS: Mention watchpoints on inaccessible memory.
* gdb.base/watchpoint.c (global_ptr, func4): New.
(main): Call func4.
* gdb.base/watchpoint.exp: Call test_inaccessible_watchpoint.
(test_inaccessible_watchpoint): New.
* gdb.texinfo (Set Watchpoints): Mention watchpoints on
unreadable memory. Delete obsolete SPARClite reference.
* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
* NEWS: Mention exec tracing support.
* inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
exec events.
* infcmd.c (kill_if_already_running, detach_command)
(disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
* infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
(follow_exec): Do not check may_follow_exec. Do not mourn and push
targets. Apply the sysroot path to the loaded executable. Use
no_shared_libraries.
* linux-nat.c (linux_child_follow_fork): Print fork following
messages if verbose.
(kill_wait_callback): Kill again before waiting a second time.
* symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
no_shared_libraries.
* gdb.base/foll-exec.exp: Update header. Skip on remote targets.
Run on GNU/Linux.
(do_exec_tests): Check for systems which do not support catchpoints.
Do not match START.
* gdb.base/foll-fork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_fork_catchpoints): New.
(explicit_fork_child_follow, catch_fork_child_follow)
(tcatch_fork_parent_follow): Update expected messages.
(do_fork_tests): Use check_fork_catchpoints.
* gdb.base/foll-vfork.exp: Update header. Skip on remote targets.
Run on GNU/Linux. Enable verbose output.
(check_vfork_catchpoints): New.
(vfork_parent_follow_to_bp, tcatch_vfork_then_child_follow): Update
expected messages.
(do_vfork_and_exec_tests): Use check_fork_catchpoints.
* hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
(hppabsd_gregset): Move to ...
(hppabsd_regset_from_core_section): Rename
hppaobsd_regset_from_core_section and move to ...
(hppabsd_find_global_pointer): Update comment.
(hppabsd_init_abi): Make global. Do not register
hppabsd_regset_from_core_section.
(hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
move to ...
(_initialize_hppabsd_tdep): Move to ...
* hppaobsd-tdep.c: ... here. New file.
* hppnbsd-tdep.c: New file.
* hppnbsd-nat.c: New file.
* Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
(ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
(hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
(hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
* configure.host (hppa*-*-netbsd*): New entry.
* configure.tgt (hppa*-*-netbsd*): New entry.
(hppa*-*-openbsd*): Update.
* NEWS (New native configuration): Mention NetBSD/hppa.
(New targets): Mention NetBSD/hppa.
* NEWS: Mention --pid and --core command line behaviour changes.
gdb/doc/
* gdb.texinfo (File Options): Remove mention of the attempt to
open a core file with the -p option. Don't list -c as a valid
option to attach to a process.
support for breakpoints at multiple locations.
* gdb.texinfo (Setting Breakpoints): Revise
documentation for pending breakpoints. Document
breakpoints with multiple locations.
* c-valprint.c (textual_element_type): New.
(c_val_print): Use it. Do not skip address printing for pointers
with a string format.
(c_value_print): Doc update.
* dwarf2read.c (read_array_type): Use make_vector_type.
* gdbtypes.c (make_vector_type): New.
(init_vector_type): Use it.
(gdbtypes_post_init): Initialize builtin_true_unsigned_char.
(_initialize_gdbtypes): Mark int8_t and uint8_t as TYPE_FLAG_NOTTEXT.
* gdbtypes.h (struct builtin_type): Add builtin_true_unsigned_char.
(TYPE_FLAG_NOTTEXT, TYPE_NOTTEXT): New.
(make_vector_type): New.
* printcmd.c (print_formatted): Only handle 's' and 'i' for examine.
Call the language print routine for string format.
(print_scalar_formatted): Call val_print for string format. Handle
unsigned original types for char format.
(validate_format): Do not reject string format.
* stabsread.c (read_type): Use make_vector_type.
* xml-tdesc.c (tdesc_start_vector): Use init_vector_type.
* gdb.texinfo (Output Formats): Update 'c' description. Describe 's'.
(Examining Memory): Update mentions of the 's' format.
(Automatic Display): Likewise.
* gdb.arch/i386-sse.exp: Do not expect character constants.
* gdb.base/charsign.c, gdb.base/charsign.exp: Delete.
* gdb.base/display.exp: Allow print/s.
* gdb.base/printcmds.exp, gdb.base/setvar.exp: Revert signed
and unsigned char array changes.
