Commit Graph

24 Commits

Author SHA1 Message Date
K. Richard Pixley
fce7f2d986 * remote.c (readchar): forward declare alarm which otherwise looks
like an undeclared variable to gcc.
1993-02-18 00:05:45 +00:00
John Gilmore
7c622b4105 * remote.c: Improve error recovery. Allow user to break out
of initial connection attempt with INTERRUPT.  Treat a timeout
while waiting for remote packet like a retry, unless the remote
side is actively running user code.  Fix a few long printf_filtered's.

* xcoffread.c (read_xcoff_symtab):  Don't use null symbol name for
trampoline symbols.

* buildsym.c (start_subfile):  Allow null file name.
1993-02-16 05:16:55 +00:00
John Gilmore
34517ebc85 Changes to make 29k function calls work better at Adobe.
* am29k-tdep.c (_initialize_29k):  Make it possible for the
user to set and query the address where function calls into the
inferior write a small scratch routine.  `set call_scratch_address'
* inferior.h (PC_IN_CALL_DUMMY):  Fix fencepost error.
* remote.c (remote_prepare_to_store): Only fetch regs if they are
not already cached validly.
1992-10-03 05:28:42 +00:00
John Gilmore
a03d4f8e65 Remove convert_{to,from}_virtual members from target structs. 1992-09-18 09:56:28 +00:00
Stu Grossman
4ecee2f9f1 * sparc-stub.c: New file. Mix it with your SPARClite
application, and it will speak GDB remote protocol!
* remote.c (remote_wait):  Change 'T' (expedited reply) message to
deal with arbitrary registers.  Needed for sparc-stub,
1992-08-15 09:34:25 +00:00
John Gilmore
38094c6033 * remote.c (getpkt): Only force retransmission ten times;
after that, assume bug in target code, and handle pkt anyway.
1992-08-05 08:46:44 +00:00
Stu Grossman
bf18ac8007 * dbxread.c (dbx_symfile_init): Move more code under hp9000s800
conditional.
* hppabsd-core.c:  Don't include "param.h", include <sys/param.h>
instead.
* remote.c (remote_wait):  Cast signal to void * to avoid warning
from busted HP compiler.
1992-06-25 23:02:57 +00:00
Fred Fish
e676a15f0b * Makefile.in (VERSION): Bump to 4.5.6.
* coffread.c (coff_end_symtab):  Cast 2nd arg of complain() to
	correct type.
	* defs.h (NORETURN):  Define away for Lucid compiler.
	* remote.c (remote_timer, remote_interrupt):  Signal handlers
	take one int arg.
	* ser-termios.c (serial_write, serial_close):  Return whatever
	value the write/close call returns, rather than falling off end.
	* inferior.h (PTRACE_ARG3_TYPE):  Third arg to ptrace is int on
	more systems than it is "char *".  Define PTRACE_ARG3_TYPE to
	default to int.
	* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
	inferior.h (call_ptrace):  Use PTRACE_ARG3_TYPE to declare type
	of third arg.
	* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
	m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
	pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
	symm-xdep.c, ultra3-xdep.c:  Use PTRACE_ARG3_TYPE to cast ptrace
	argument 3.
	* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
	store_inferior_registers): Supply missing fourth argument to
	ptrace().
1992-06-24 04:49:48 +00:00
John Gilmore
8f86a4e465 * remote.c (getpkt): Error if input exceeds buffer size.
(_initialize_remote):  `set remotedebug' enables packet trace.

* dbxread.c (process_one_symbol:N_FUN):  GCC now produces relative
N_SLINE's, etc, just like Sun cc on Solaris2.

* am29k-tdep.c (read_register_stack, write_register_stack):
Change RSTACK_HIGH_ADDR to rstack_high_address, a user-settable
variable.  Add `set' and `show' commands for it.
* doc/gdb.texinfo:  Document it.

* eval.c:  Avoid residue-by-zero when evaluating without side effects.
(Bug and fix found by Pierre Willard.)

* sparc-tdep.c:  Clean up slightly for Solaris2.
1992-06-19 21:09:54 +00:00
Michael Tiemann
d747e0af3d Tue Mar 3 15:11:52 1992 Michael Tiemann (tiemann@cygnus.com)
* All GDB files that #include defs.h: Removed stdio.h.
	(defs.h): #include stdio.h.

This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion.  (n.b.
many configurations don't build for other reasons.)
1992-03-03 23:26:26 +00:00
John Gilmore
b543979cda * remote.c: Make it work for embedded MIPS. Increase buffer
size, and use throughout.  Round buffer size up if too many regs.
Support baud rate setting and try for an 8-bit path.  If
interrupted while waiting for target, send a ^C down the wire.
Avoid single-byte reads.
* tm-mips.h:  Add more embedded-system registers to REGISTER_NAMES
and NUM_REGS.
* mips-xdep.h:  Avoid the embedded regs when on Unix.
1992-02-28 03:26:45 +00:00
John Gilmore
5594d534a2 Saber C (lint) cleanups, and a few bug fixes. See ChangeLog. 1991-05-04 23:15:02 +00:00
John Gilmore
77ac93922c See ChangeLog. 1991-05-04 05:07:07 +00:00
Jim Kingdon
e1ce8aa5ed The list of changes is too long to fit in the cvs log (since it truncates!).
Look at the ChangeLog for Apr 30 and May 1.
1991-05-02 04:28:42 +00:00
Jim Kingdon
eb7ba50c7c * remote.c (getpkt): Don't set immediate_quit. 1991-04-24 17:14:10 +00:00
Jim Kingdon
f2ebc25fc2 * findvar.c (read_register_gen): Add "target byte-order" comment.
Wed Apr 17 17:09:48 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* i386-tdep.c (i386_get_frame_setup): Use SWAP_TARGET_AND_HOST
	before returning locals or slocals.

	* i386-tdep.c (i386_follow_jump): Do not add data16 to pos in
	call to codestream_seek; add one to pos if (and only if)
	we are dealing with a jump with data16 == 1 (i.e. 0x66, 0xe9).

Mon Apr 15 12:04:32 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* valops.c (call_function_by_hand): Put dummy1 in target order
	before FIX_CALL_DUMMY.

	* tm-i386v.h (FIX_CALL_DUMMY): Don't depend on host byte order.

Sun Apr 14 11:55:19 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* valops.c (push_word): Add SWAP_TARGET_AND_HOST.

	* remote.c (remote_open): Send '+' before calling putpkt().

	* tm-i386v.h (REGISTER_VIRTUAL_TYPE): Return pointer to void,
	not int, for pc, fp, and sp.

	* remote.c (remote_open): Call start_remote after putpkt("?");
1991-04-20 03:57:50 +00:00
Jim Kingdon
f2fc6e7a5c * target.h: Add to_doc and target_preopen.
target.c: Add target_preopen and target_command.
	Remove target_info.
	(add_target): Call add_cmd and mess with targetlist->doc.
	core.c, exec.c, remote-eb.c, remote-nindy.c, remote-vx.c,
	remote-vx.68.c, inftarg.c, remote.c: Add doc field to target struct.
	Call target_preopen from open routine.
1991-04-19 01:36:57 +00:00
K. Richard Pixley
bd5635a1e2 Initial revision 1991-03-28 16:26:26 +00:00
John Gilmore
831c851165 Initial revision 1990-09-05 17:54:31 +00:00
gdb-3.5
7a67dd45ca gdb-3.5 2012-06-03 15:36:32 +01:00
gdb-3.3
4187119d59 gdb-3.3 2012-06-03 15:36:32 +01:00
gdb-3.1
e91b87a368 gdb-3.1 2012-06-03 15:36:31 +01:00
gdb-2.8
3bf57d2108 gdb-2.8 2012-06-03 15:36:31 +01:00
gdb-2.5.1
632ea0ccc5 gdb-2.5.1 2012-06-03 15:36:30 +01:00