Commit Graph

101 Commits

Author SHA1 Message Date
Alan Modra
b16b813f9d * Makefile.am (HFILES): Add itbl-lex.h.
(itbl-lex.o, itbl-parse.o): Depend on itbl-lex.h
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
2005-02-21 11:49:31 +00:00
Ian Lance Taylor
14ee9f48f9 * configure.tgt: New.
* configure.in: Move setting of cpu_type, fmt, etc., to
	configure.tgt.
	* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
	$(srcdir)/configure.tgt.
	* configure, Makefile.in: Rebuild.
2004-12-22 15:29:25 +00:00
Mark Mitchell
c820d41869 * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
* configure.in: Use it for arm*-*-linux-gnueabi*.
	* config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
	* config/te-armlinuxeabi.h: New file.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Regenerated.
2004-12-03 01:22:15 +00:00
Nick Clifton
3211808135 Change LOCALEDIR to $(datadir)/share. 2004-11-30 17:20:48 +00:00
Nick Clifton
a394c00fe6 Add ARM CFI support 2004-10-25 12:26:04 +00:00
Alan Modra
3c55da702a * Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.
2004-10-15 05:49:33 +00:00
Bob Wilson
43cd72b9aa bfd ChangeLog
* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
	(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
	(elf32xtensa_no_literal_movement): New global variable.
	(elf_howto_table): Add entries for new relocations.
	(elf_xtensa_reloc_type_lookup): Handle new relocations.
	(property_table_compare): When addresses are equal, compare sizes and
	various property flags.
	(property_table_matches): New.
	(xtensa_read_table_entries): Extend to read new property tables.  Add
	output_addr parameter to indicate that output addresses should be used.
	Use bfd_get_section_limit.
	(elf_xtensa_find_property_entry): New.
	(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
	(elf_xtensa_check_relocs): Handle new relocations.
	(elf_xtensa_do_reloc): Use bfd_get_section_limit.  Handle new
	relocations.  Use new xtensa-isa.h functions.
	(build_encoding_error_message): Remove encode_result parameter.  Add
	new target_address parameter used to detect alignment errors.
	(elf_xtensa_relocate_section): Use bfd_get_section_limit.  Clean up
	error handling.  Use new is_operand_relocation function.
	(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
	Use underbar macro for error messages.  Formatting.
	(get_const16_opcode): New.
	(get_l32r_opcode): Add a separate flag for initialization.
	(get_relocation_opnd): Operand number is no longer explicit in the
	relocation.  Change to decode the opcode and analyze its operands.
	(get_relocation_slot): New.
	(get_relocation_opcode): Add bfd parameter.  Use bfd_get_section_limit.
	Use new xtensa-isa.h functions to handle multislot instructions.
	(is_l32r_relocation): Add bfd parameter.  Use is_operand_relocation.
	(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
	insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
	check_loop_aligned, check_branch_target_aligned_address, narrowable,
	widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
	get_single_format, init_op_single_format_table): New.
	(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
	instead of calling _bfd_error_handler.  Use new xtensa-isa.h functions.
	(contract_asm_expansion): Add error_message parameter and pass it to
	elf_xtensa_do_asm_simplify.  Replace use of R_XTENSA_OP0 relocation
	with R_XTENSA_SLOT0_OP.
	(get_expanded_call_opcode): Extend to handle either L32R or CONST16
	instructions.  Use new xtensa-isa.h functions.
	(r_reloc struct): Add new virtual_offset field.
	(r_reloc_init): Add contents and content_length parameters.  Set
	virtual_offset field to zero.  Add contents to target_offset field for
	partial_inplace relocations.
	(r_reloc_is_defined): Check for null.
	(print_r_reloc): New debug function.
	(source_reloc struct): Replace xtensa_operand field with pair of the
	opcode and the operand position.  Add is_abs_literal field.
	(init_source_reloc): Specify operand by opcode/position pair.  Set
	is_abs_literal field.
	(source_reloc_compare): When target_offsets are equal, compare other
	fields to make sorting predictable.
	(literal_value struct): Add is_abs_literal field.
	(value_map_hash_table struct): Add has_last_loc and last_loc fields.
	(init_literal_value): New.
	(is_same_value): Replace with ...
	(literal_value_equal): ... this function.  Add comparisons of
	virtual_offset and is_abs_literal fields.
	(value_map_hash_table_init): Use bfd_zmalloc.  Check for allocation
	failure.  Initialize has_last_loc field.
	(value_map_hash_table_delete): New.
	(hash_literal_value): Rename to ...
	(literal_value_hash): ... this.  Include is_abs_literal flag and
	virtual_offset field in the hash value.
	(get_cached_value): Rename to ...
	(value_map_get_cached_value): ... this.  Update calls to
	literal_value_hash and literal_value_equal.
	(add_value_map): Check for allocation failure.  Update calls to
	value_map_get_cached_value and literal_value_hash.
	(text_action, text_action_list, text_action_t): New types.
	(find_fill_action, compute_removed_action_diff, adjust_fill_action,
	text_action_add, text_action_add_literal, offset_with_removed_text,
	offset_with_removed_text_before_fill, find_insn_action,
	print_action_list, print_removed_literals): New.
	(offset_with_removed_literals): Delete.
	(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
	fix_array, fix_array_count, allocated_relocs, relocs_count, and
	allocated_relocs_count fields.
	(init_xtensa_relax_info): Initialize new fields.
	(reloc_bfd_fix struct): Add new translated field.
	(reloc_bfd_fix_init): Add translated parameter and use it to set the
	translated field.
	(fix_compare, cache_fix_array): New.
	(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
	section via get_xtensa_relax_info.  Use cache_fix_array to set up
	sorted fix_array and use bsearch instead of linear search.
	(section_cache_t): New struct.
	(init_section_cache, section_cache_section, clear_section_cache): New.
	(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
	(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
	extend_ebb_bounds_forward, extend_ebb_bounds_backward,
	insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
	New.
	(retrieve_contents): Use bfd_get_section_limit.
	(elf_xtensa_relax_section): Add relocations_analyzed flag.  Update call
	to compute_removed_literals.  Free value_map_hash_table when no longer
	needed.
	(analyze_relocations): Check is_relaxable_asm_section flag.  Call
	compute_text_actions for all sections.
	(find_relaxable_sections): Mark sections as relaxable if they contain
	ASM_EXPAND relocations that can be optimized.  Adjust r_reloc_init
	call.  Increment relax_info src_count field only for appropriate
	relocation types.  Remove is_literal_section check.
	(collect_source_relocs): Use bfd_get_section_limit.  Adjust calls to
	r_reloc_init and find_associated_l32r_irel.  Check
	is_relaxable_asm_section flag.  Handle L32R instructions with absolute
	literals.  Pass is_abs_literal flag to init_source_reloc.
	(is_resolvable_asm_expansion): Use bfd_get_section_limit.  Check for
	CONST16 instructions.  Adjust calls to r_reloc_init and
	pcrel_reloc_fits.  Handle weak symbols conservatively.
	(find_associated_l32r_irel): Add bfd parameter and pass it to
	is_l32r_relocation.
	(compute_text_actions, compute_ebb_proposed_actions,
	compute_ebb_actions, check_section_ebb_pcrels_fit,
	check_section_ebb_reduces, text_action_add_proposed,
	compute_fill_extra_space): New.
	(remove_literals): Replace with ...
	(compute_removed_literals): ... this function.  Call
	init_section_cache.  Use bfd_get_section_limit.  Sort internal_relocs.
	Call xtensa_read_table_entries to get the property table.  Skip
	relocations other than R_XTENSA_32 and R_XTENSA_PLT.  Use new
	is_removable_literal, remove_dead_literal, and
	identify_literal_placement functions.
	(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
	instead of linear search.
	(is_removable_literal, remove_dead_literal,
	identify_literal_placement): New.
	(relocations_reach): Update check for literal not referenced by any
	PC-relative relocations.  Adjust call to pcrel_reloc_fits.
	(coalesce_shared_literal, move_shared_literal): New.
	(relax_section): Use bfd_get_section_limit.  Call
	translate_section_fixes.  Update calls to r_reloc_init and
	offset_with_removed_text.  Check new is_relaxable_asm_section flag.
	Add call to pin_internal_relocs.  Add special handling for
	R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs.  Use virtual_offset
	info to calculate new addend_displacement variable.  Replace code for
	deleting literals with more general code to perform the actions
	determined by the action_list for the section.
	(translate_section_fixes, translate_reloc_bfd_fix): New.
	(translate_reloc): Check new is_relaxable_asm_section flag.  Call
	find_removed_literal only if is_operand_relocation.  Update call to
	offset_with_removed_text.  Use new target_offset and removed_bytes
	variables.
	(move_literal): New.
	(relax_property_section):  Use bfd_get_section_limit.  Set new
	is_full_prop_section flag and handle new property tables.  Update calls
	to r_reloc_init and offset_with_removed_text.  Check
	is_relaxable_asm_section flag.  Handle expansion of zero-sized
	unreachable entries, with use of offset_with_removed_text_before_fill.
	For relocatable links, combine entries only for literal tables.
	(relax_section_symbols): Check is_relaxable_asm_section flag.  Update
	calls to offset_with_removed_text.  Translate st_size field for
	function symbols.
	(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
	failure.  Add contents parameter.  Update call to get_bfd_fix.  Update
	call to r_reloc_init.  Call _bfd_error_handler and return FALSE for
	R_XTENSA_ASM_EXPAND relocs.
	(do_fix_for_final_link): Add input_bfd and contents parameters.  Update
	call to get_bfd_fix.  Include offset from contents for partial_inplace
	relocations.
	(is_reloc_sym_weak): New.
	(pcrel_reloc_fits): Use new xtensa-isa.h functions.
	(prop_sec_len): New.
	(xtensa_is_property_section): Handle new property sections.
	(is_literal_section): Delete.
	(internal_reloc_compare): When r_offset matches, compare r_info and
	r_addend to make sorting predictable.
	(internal_reloc_matches): New.
	(xtensa_get_property_section_name): Handle new property sections.
	(xtensa_get_property_predef_flags): New.
	(xtensa_callback_required_dependence): Use bfd_get_section_limit.
	Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
	* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
	(xtisa_errno, xtisa_error_msg): New variables.
	(xtensa_isa_errno, xtensa_isa_error_msg): New.
	(xtensa_insnbuf_alloc): Add error handling.
	(xtensa_insnbuf_to_chars): Add num_chars parameter.  Update to
	use xtensa_format_decode.  Add error handling.
	(xtensa_insnbuf_from_chars): Add num_chars parameter.  Decode the
	instruction length to find the number of bytes to copy.
	(xtensa_isa_init): Add error handling.  Replace calls to
	xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
	tables in the xtensa_modules structure.
	(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
	xtensa_extend_isa): Delete.
	(xtensa_isa_free): Change to only free lookup tables.
	(opname_lookup_compare): Replace with ...
	(xtensa_isa_name_compare): ... this function.  Use strcasecmp.
	(xtensa_insn_maxlength): Rename to ...
	(xtensa_isa_maxlength): ... this.
	(xtensa_insn_length): Delete.
	(xtensa_insn_length_from_first_byte): Replace with ...
	(xtensa_isa_length_from_chars): ... this function.
	(xtensa_num_opcodes): Rename to ...
	(xtensa_isa_num_opcodes): ... this.
	(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
	xtensa_isa_num_regfiles, xtensa_isa_num_stages,
	xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
	xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
	xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
	xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
	xtensa_format_get_slot, xtensa_format_set_slot): New functions.
	(xtensa_opcode_lookup): Add error handling.
	(xtensa_decode_insn): Replace with ...
	(xtensa_opcode_decode): ... this function, with new format and
	slot parameters.  Add error handling.
	(xtensa_encode_insn): Replace with ...
	(xtensa_opcode_encode): ... this function, which does the encoding via
	one of the entries in the "encode_fns" array.  Add error handling.
	(xtensa_opcode_name): Add error handling.
	(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
	xtensa_opcode_is_call): New.
	(xtensa_num_operands): Replace with ...
	(xtensa_opcode_num_operands): ... this function.  Add error handling.
	(xtensa_opcode_num_stateOperands,
	xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
	xtensa_opcode_funcUnit_use, xtensa_operand_name,
	xtensa_operand_is_visible): New.
	(xtensa_get_operand, xtensa_operand_kind): Delete.
	(xtensa_operand_inout): Add error handling and special-case for
	"sout" operands.
	(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
	operate on one slot of an instruction.  Added error handling.
	(xtensa_operand_encode): Handle default operands with no encoding
	functions.  Check for success by comparing against decoded value.
	Add error handling.
	(xtensa_operand_decode): Handle default operands.  Return decoded value
	through argument pointer.  Add error handling.
	(xtensa_operand_is_register, xtensa_operand_regfile,
	xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
	(xtensa_operand_isPCRelative): Rename to ...
	(xtensa_operand_is_PCrelative): ... this.  Add error handling.
	(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
	through argument pointer.  Add error handling.
	(xtensa_stateOperand_state, xtensa_stateOperand_inout,
	xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
	xtensa_regfile_lookup_shortname, xtensa_regfile_name,
	xtensa_regfile_shortname, xtensa_regfile_view_parent,
	xtensa_regfile_num_bits, xtensa_regfile_num_entries,
	xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
	xtensa_state_is_exported, xtensa_sysreg_lookup,
	xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
	xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
	xtensa_interface_num_bits, xtensa_interface_inout,
	xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
	xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
	* xtensa-modules.c: Rewrite to use new data structures.
	* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
	BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
	BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
	BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
	BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
	BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
	BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
	BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
	BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
	BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
	BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
	BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
	BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
	BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
	BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
	BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
	BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
	* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Likewise.
	* libbfd.h: Likewise.

gas ChangeLog

	* config/tc-xtensa.c (absolute_literals_supported): New global flag.
	(UNREACHABLE_MAX_WIDTH): Define.
	(XTENSA_FETCH_WIDTH): Delete.
	(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
	prefer_const16, prefer_l32r): New global variables.
	(LIT4_SECTION_NAME): Define.
	(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
	(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
	(frag_flags struct): New.
	(xtensa_block_info struct): Move from tc-xtensa.h.  Add flags field.
	(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
	(bitfield, bit_is_set, set_bit, clear_bit): Define.
	(MAX_FORMATS): Define.
	(op_placement_info struct, op_placement_table): New.
	(O_pltrel, O_hi16, O_lo16): Define.
	(directiveE enum): Rename directive_generics to directive_transform.
	Delete directive_relax.  Add directive_schedule,
	directive_absolute_literals, and directive_last_directive.
	(directive_info): Rename "generics" to "transform".  Delete "relax".
	Add "schedule" and "absolute-literals".
	(directive_state): Adjust entries to match changes in directive_info.
	(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
	(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
	xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
	(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
	(align_only_targets, software_a0_b_retw_interlock,
	software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
	software_avoid_short_loop, software_avoid_close_loop_end,
	software_avoid_all_short_loops, specific_opcode): Delete.
	(warn_unaligned_branch_targets): New.
	(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
	workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
	(option_[no_]link_relax, option_[no_]transform,
	option_[no_]absolute_literals, option_warn_unaligned_targets,
	option_prefer_l32r, option_prefer_const16, option_target_hardware):
	New enum values.
	(option_[no_]align_only_targets, option_literal_section_name,
	option_text_section_name, option_data_section_name,
	option_bss_section_name, option_eb, option_el): Delete.
	(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
	warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
	and target-hardware.  Delete entries for [no-]target-align-only,
	literal-section-name, text-section-name, data-section-name, and
	bss-section-name.
	(md_parse_option): Handle new options and remove old ones.  Accept but
	ignore [no-]density options.  Warn for [no-]generics and [no-]relax
	and treat them as [no-]transform.
	(md_show_usage): Add new options and remove old ones.
	(xtensa_setup_hw_workarounds): New.
	(md_pseudo_table): Change "word" entry to use xtensa_elf_cons.  Add
	"long", "short", "loc" and "frequency" entries.
	(use_generics): Rename to ...
	(use_transform): ... this function.  Add past_xtensa_end check.
	(use_longcalls): Add past_xtensa_end check.
	(code_density_available, can_relax): Delete.
	(do_align_targets): New.
	(get_directive): Accept dashes in directive names.  Warn about
	[no-]generics and [no-]relax directives and treat them as
	[no-]transform.
	(xtensa_begin_directive): Call md_flush_pending_output only for some
	directives.  Check for directives inside instruction bundles.  Warn
	about deprecated ".begin literal" usage.  Warn and ignore [no-]density
	directives.  Handle new directives.  Check generating_literals flag
	for literal_prefix.
	(xtensa_end_directive): Check for directives inside instruction
	bundles.  Warn and ignore [no-]density directives.  Handle new
	directives.  Call xtensa_set_frag_assembly_state.
	(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
	xtensa_dwarf2_emit_insn): New.
	(xtensa_literal_position): Call md_flush_pending_output.  Do not check
	use_literal_section flag.
	(xtensa_literal_pseudo): Call md_flush_pending_output.  Handle absolute
	literals.  Use xtensa_elf_cons to parse the expression.
	(xtensa_literal_prefix): Do not check use_literal_section.  Support
	".lit4" sections for absolute literals.  Change prefix convention to
	replace ".text" (or ".t" in a linkonce section).  No need to call
	subseg_set.
	(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
	(expression_end): Handle closing braces and colons.
	(PLT_SUFFIX, plt_suffix): Delete.
	(expression_maybe_register): Use new xtensa-isa.h functions.  Use
	xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
	and O_hi16 expressions as well.
	(tokenize_arguments): Handle closing braces and colons.
	(parse_arguments): Use new xtensa-isa.h functions.  Handle "invisible"
	operands and paired register syntax.
	(get_invisible_operands): New.
	(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax.  Use
	new xtensa-isa.h functions.
	(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
	(xg_translate_idioms): Check if inside bundle.  Use use_transform.
	Handle new Xtensa LX RSR/WSR/XSR syntax.  Remove code to widen density
	instructions.  Use xtensa_translate_zero_immed.
	(operand_is_immed, operand_is_pcrel_label): Delete.
	(get_relaxable_immed): Use new xtensa-isa.h functions.
	(get_opcode_from_buf): Add slot parameter.  Use new xtensa-isa.h
	functions.
	(xtensa_print_insn_table, print_vliw_insn): New.
	(is_direct_call_opcode): Use new xtensa-isa.h functions.
	(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
	is_branch_or_jump_opcode): Delete.
	(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
	(opnum_to_reloc, reloc_to_opnum): Delete.
	(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
	xtensa-isa.h functions.  Operate on one slot of an instruction.
	(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
	xg_get_insn_size): Delete.
	(xg_get_build_instr_size): Use xg_get_single_size.
	(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_get_max_narrow_insn_size): Delete.
	(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
	xg_is_relaxable_insn): Update calls to xg_build_widen_table.  Use
	xg_get_single_size.
	(xg_build_to_insn): Record the loc field.  Handle OP_OPERAND_HI16U and
	OP_OPERAND_LOW16U.  Check xg_valid_literal_expression.
	(xg_expand_to_stack, xg_expand_narrow): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_immeds_fit): Use new xtensa-isa.h functions.  Update call to
	xg_check_operand.
	(xg_symbolic_immeds_fit): Likewise.  Also handle O_lo16 and O_hi16, and
	treat weak symbols conservatively.
	(xg_check_operand): Use new xtensa-isa.h functions.
	(is_dnrange): Delete.
	(xg_assembly_relax): Inline previous calls to tinsn_copy.
	(xg_finish_frag): Specify separate relax states for the frag and slot0.
	(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
	xtensa-isa.h functions.
	(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
	xg_instruction_matches_options): New.
	(xg_instruction_matches_rule): Handle O_register expressions.  Call
	xg_instruction_matches_options.
	(transition_rule_cmp): New.
	(xg_instruction_match): Update call to xg_build_simplify_table.
	(xg_build_token_insn): Record loc fields.
	(xg_simplify_insn): Check is_specific_opcode field and
	density_supported flag.
	(xg_expand_assembly_insn): Skip checking code_density_available.  Use
	new xtensa-isa.h functions.  Call use_transform instead of can_relax.
	(xg_assemble_literal): Add error handling for O_big.  Call
	record_alignment.  Handle O_pltrel.
	(xg_valid_literal_expression): New.
	(xg_assemble_literal_space): Add slot parameter.  Remove call to
	set_expr_symbol_offset.  Add call to record_alignment.  Update call to
	xg_finish_frag.
	(xg_emit_insn): Delete.
	(xg_emit_insn_to_buf): Add format parameter.  Update calls to
	xg_add_opcode_fix and xtensa_insnbuf_to_chars.
	(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
	and slot parameters.  Handle new "alternate" relocations for absolute
	literals and CONST16 instructions.  Check for bad uses of O_lo16 and
	O_hi16.  Use new xtensa-isa.h functions.
	(xg_assemble_tokens): Delete.
	(is_register_writer): Use new xtensa-isa.h functions.
	(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
	old-style RSR from LCOUNT.
	(next_frag_opcode): Delete.
	(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
	update_next_frag_state): New.
	(update_next_frag_nop_state): Delete.
	(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
	(xtensa_mark_literal_pool_location): Check use_literal_section flag and
	the state of the absolute-literals directive.  Add calls to
	record_alignment and xtensa_set_frag_assembly_state.  Call
	xtensa_switch_to_non_abs_literal_fragment instead of
	xtensa_switch_to_literal_fragment.
	(build_nop): New.
	(assemble_nop): Use build_nop.  Update call to xtensa_insnbuf_to_chars.
	(get_expanded_loop_offset): Change check for undefined opcode to an
	assertion.
	(xtensa_set_frag_assembly_state, relaxable_section,
	xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
	xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
	(md_begin): Update call to xtensa_isa_init.  Initialize linkrelax to 1.
	Set lit4_seg_name.  Call xg_init_vinsn.  Initialize new global opcodes.
	Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
	(xtensa_init_fix_data): New.
	(xtensa_frob_label): Reset label symbol to the current frag.  Check
	do_align_targets and generating_literals flag.  Propagate frequency
	info to new alignment frag.  Call xtensa_set_frag_assembly_state.
	(xtensa_unrecognized_line): New.
	(xtensa_flush_pending_output): Check if inside a bundle.  Add a call
	to xtensa_set_frag_assembly_state.
	(error_reset_cur_vinsn): New.
	(md_assemble): Remove check for literal frag.  Remove call to
	istack_init.  Call use_transform instead of use_generics.  Parse
	explicit instruction format specifiers.  Move code for
	a0_b_retw_interlock workaround to xg_assemble_vliw_tokens.  Call
	error_reset_cur_vinsn on errors.  Add call to get_invisible_operands.
	Add dwarf2_where call.  Remote automatic alignment for ENTRY
	instructions.  Move call to xtensa_clear_insn_labels to the end.
	Rearrange to handle bundles.
	(xtensa_cons_fix_new): Delete.
	(xtensa_handle_align): New.
	(xtensa_frag_init): Call xtensa_set_frag_assembly_state.  Remove
	assignment to is_no_density field.
	(md_pcrel_from): Use new xtensa-isa.h functions.  Use decode_reloc
	instead of reloc_to_opnum.  Handle "alternate" relocations.
	(xtensa_force_relocation, xtensa_check_inside_bundle,
	xtensa_elf_section_change_hook): New.
	(xtensa_symbol_new_hook): Delete.
	(xtensa_fix_adjustable): Check for difference of symbols with an
	offset.  Check for external and weak symbols.
	(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
	(md_estimate_size_before_relax): Return expansion for the first slot.
	(tc_gen_reloc): Handle difference of symbols by producing
	XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
	into the output.  Handle new XTENSA_SLOT*_OP relocs by storing the
	tentative values into the output when linkrelax is set.
	(XTENSA_PROP_SEC_NAME): Define.
	(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
	Create literal tables only if using literal sections.  Create new
	property tables instead of old instruction tables.  Check for unaligned
	branch targets and loops.
	(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
	new_resource_table, clear_resource_table, resize_resource_table,
	resources_available, reserve_resources, release_resources,
	opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
	resources_conflict, xg_find_narrowest_format, relaxation_requirements,
	bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
	(xtensa_end): Call xtensa_flush_pending_output.  Set past_xtensa_end
	flag.  Update checks for workaround options.  Call
	xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
	(xtensa_cleanup_align_frags): Add special case for branch targets.
	Check for and mark unreachable frags.
	(xtensa_fix_target_frags): Remove use of align_only_targets flag.
	Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
	end of a zero-overhead loop body.
	(frag_can_negate_branch): Handle instructions with multiple slots.
	Use new xtensa-isa.h functions
	(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
	xtensa_mark_zcl_first_insns): New.
	(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
	transformations are disabled.
	(next_instrs_are_b_retw): Use new xtensa-isa.h functions.  Handle
	multislot instructions.
	(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
	Likewise.  Also error if transformations are disabled.
	(unrelaxed_frag_max_size): New.
	(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
	xtensa-isa.h functions.
	(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
	xtensa_opcode_is_loop instead of is_loop_opcode.
	(get_text_align_power): Replace as_fatal with assertion.
	(get_text_align_fill_size): Iterate instead of using modulus when
	use_nops is false.
	(get_noop_aligned_address): Assert that this is for a machine-dependent
	RELAX_ALIGN_NEXT_OPCODE frag.  Use next_frag_opcode_is_loop,
	xg_get_single_size, and frag_format_size.
	(get_widen_aligned_address): Rename to ...
	(get_aligned_diff): ... this function.  Add max_diff parameter.
	Remove handling of rs_align/rs_align_code frags.  Use
	next_frag_format_size, get_text_align_power, get_text_align_fill_size,
	next_frag_opcode_is_loop, and xg_get_single_size.  Compute max_diff
	and pass it back to caller.
	(xtensa_relax_frag): Use relax_frag_loop_align.  Add code for new
	RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
	RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types.  Check relax_seen.
	(relax_frag_text_align): Rename to ...
	(relax_frag_loop_align): ... this function.  Assume loops can only be
	in the first slot of an instruction.
	(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
	instruction.  Remove call to frag_wane.
	(relax_frag_narrow): Rename to ...
	(relax_frag_for_align): ... this function.  Extend to handle
	RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
	RELAX_NARROW for the first slot.
	(find_address_of_next_align_frag, bytes_to_stretch): New.
	(future_alignment_required): Use find_address_of_next_align_frag and
	bytes_to_stretch.  Look ahead to subsequent frags to make smarter
	alignment decisions.
	(relax_frag_immed): Add format, slot, and estimate_only parameters.
	Check if transformations are enabled for b_j_loop_end workaround.
	Use new xtensa-isa.h functions and handle multislot instructions.
	Update call to xg_assembly_relax.
	(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
	RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
	frag types.
	(convert_frag_narrow): Add segP, format and slot parameters.  Call
	convert_frag_immed for branch instructions.  Adjust calls to
	tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf.  Use
	xg_get_single_size and xg_get_single_format.
	(convert_frag_fill_nop): New.
	(convert_frag_immed): Add format and slot parameters.  Handle multislot
	instructions and use new xtensa-isa.h functions.  Update calls to
	tinsn_immed_from_frag and xg_assembly_relax.  Check if transformations
	enabled for b_j_loop_end workaround.  Use build_nop instead of
	assemble_nop.  Check is_specific_opcode flag.  Check for unreachable
	frags.  Use xg_get_single_size.  Handle O_pltrel.
	(fix_new_exp_in_seg): Remove check for old plt flag.
	(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
	xtensa_insnbuf_to_chars.  Call tinsn_immed_from_frag.  Change check
	for loop opcode to an assertion.  Mark all frags up to the end of the
	loop as not transformable.
	(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
	(get_subseg_info): New.
	(xtensa_move_literals): Call xtensa_set_frag_assembly_state.  Add null
	check for dest_seg.
	(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
	literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
	(xtensa_switch_to_non_abs_literal_fragment): New.
	(cache_literal_section): Add is_code parameter and pass it through to
	retrieve_literal_seg.
	(retrieve_literal_seg): Add is_code parameter and use it to set the
	flags on the literal section.  Handle case where head parameter is 0.
	(get_frag_is_no_transform, set_frag_is_specific_opcode,
	set_frag_is_no_transform): New.
	(xtensa_create_property_segments): Add end_property_function parameter
	and pass it through to add_xt_block_frags.  Call bfd_get_section_flags
	and skip SEC_DEBUGGING and !SEC_ALLOC sections.
	(xtensa_create_xproperty_segments, section_has_xproperty): New.
	(add_xt_block_frags): Add end_property_function parameter and call it
	if it is non-zero.  Call xtensa_frag_flags_init.
	(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
	get_frag_property_flags, frag_flags_to_number,
	xtensa_frag_flags_combinable, xt_block_aligned_size,
	xtensa_xt_block_combine, add_xt_prop_frags,
	init_op_placement_info_table, opcode_fits_format_slot,
	xg_get_single_size, xg_get_single_format): New.
	(istack_push): Inline call to tinsn_copy.
	(tinsn_copy): Delete.
	(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
	CONST16 opcodes.  Handle O_big, O_illegal, and O_absent.
	(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
	(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
	functions.  Handle invisible operands.
	(tinsn_to_slotbuf): New.
	(tinsn_check_arguments): Use new xtensa-isa.h functions.
	(tinsn_from_chars): Add slot parameter.  Rewrite using xg_init_vinsn,
	vinsn_from_chars, and xg_free_vinsn.
	(tinsn_from_insnbuf): New.
	(tinsn_immed_from_frag): Add slot parameter and handle multislot
	instructions.  Handle symbol differences.
	(get_num_stack_text_bytes): Use xg_get_single_size.
	(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
	xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
	get_expr_register, set_expr_symbol_offset_diff): New.
	* config/tc-xtensa.h (MAX_SLOTS): Define.
	(xtensa_relax_statesE): Move from tc-xtensa.c. Add
	RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
	RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
	RELAX_NONE types.
	(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
	(xtensa_frag_type struct): Add is_assembly_state_set,
	use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
	is_align, is_text_align, alignment, and is_first_loop_insn fields.
	Replace is_generics and is_relax fields by is_no_transform field.
	Delete is_text and is_longcalls fields.  Change text_expansion and
	literal_expansion to arrays of MAX_SLOTS entries.  Add arrays of
	per-slot information: literal_frags, slot_subtypes, slot_symbols,
	slot_sub_symbols, and slot_offsets.  Add fr_prev field.
	(xtensa_fix_data struct): New.
	(xtensa_symfield_type struct): Delete plt field.
	(xtensa_block_info struct): Move definition to tc-xtensa.h.  Add
	forward declaration here.
	(xt_section_type enum): Delete xt_insn_sec.  Add xt_prop_sec.
	(XTENSA_SECTION_RENAME): Undefine.
	(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
	tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
	HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
	(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
	(unit_num_copies_func, opcode_num_units_func,
	opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
	(resource_table struct): New.
	* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
	(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
	literal_space, symbol, sub_symbol, offset, and literal_frag fields.
	(tinsn_copy): Delete prototype.
	(vliw_insn struct): New.
	* config/xtensa-relax.c (insn_pattern_struct): Add options field.
	(widen_spec_list): Add option conditions for density and boolean
	instructions.  Add expansions using CONST16 and conditions for using
	CONST16 vs. L32R.  Use new Xtensa LX RSR/WSR syntax.  Add entries for
	predicted branches.
	(simplify_spec_list): Add option conditions for density instructions.
	Add entry for NOP instruction.
	(append_transition): Add cmp function pointer parameter and use it to
	insert the new entry in order.
	(operand_function_LOW16U, operand_function_HI16U): New.
	(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
	OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(enter_opname, split_string): Use xstrdup instead of strdup.
	(init_insn_pattern): Initialize new options field.
	(clear_req_or_option_list, clear_req_option_list,
	clone_req_or_option_list, clone_req_option_list, parse_option_cond):
	New.
	(parse_insn_pattern): Parse option conditions.
	(transition_applies): New.
	(build_transition): Use new xtensa-isa.h functions.  Fix incorrectly
	swapped last arguments in calls to append_constant_value_condition.
	Call clone_req_option_list.  Add warning about invalid opcode.
	Handle LOW16U and HI16U function names.
	(build_transition_table): Add cmp parameter and use it in calls to
	append_transition.  Use new xtensa-isa.h functions.  Check
	transition_applies before adding entries.
	(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
	pass it through to build_transition_table.
	* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
	ReqOption, transition_cmp_fn): New types.
	(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(transition_rule struct): Add options field.
	* doc/as.texinfo (Overview): Update Xtensa options.
	* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
	--[no-]relax, and --[no-]generics options.  Update descriptions of
	--text-section-literals and --[no-]longcalls.  Add
	--[no-]absolute-literals and --[no-]transform.
	(Xtensa Syntax): Add description of syntax for FLIX instructions.
	Remove use of "generic" and "specific" terminology for opcodes.
	(Xtensa Registers): Generalize the syntax description to include
	user-defined register files.
	(Xtensa Automatic Alignment): Update.
	(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
	(Xtensa Call Relaxation): Linker can now remove most of the overhead.
	(Xtensa Directives): Remove confusing rules about precedence.
	(Density Directive, Relax Directive): Delete.
	(Schedule Directive): New.
	(Generics Directive): Rename to ...
	(Transform Directive): ... this node.
	(Literal Directive): Update for absolute literals.  Missing
	literal_position directive is now an error.
	(Literal Position Directive): Update for absolute literals.
	(Freeregs Directive): Delete.
	(Absolute Literals Directive): New.
	(Frame Directive): Minor editing.
	* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
	Update dependencies.
	* Makefile.in: Regenerate.

gas/testsuite ChangeLog

	* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
	Change entry_align test to expect an error.
	* gas/xtensa/entry_misalign2.s: Use no-transform instead of
	no-generics directives.

include ChangeLog

	* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
	XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
	(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
	* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
	(config_sturct struct): Delete.
	(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
	XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
	XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
	XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
	XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
	(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
	(xtensa_insn_decode_fn): Rename to ...
	(xtensa_opcode_decode_fn): ... this.
	(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
	xtensa_undo_reloc_fn): Update.
	(xtensa_encoding_template_fn): Delete.
	(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
	xtensa_length_decode_fn): New.
	(xtensa_format_internal, xtensa_slot_internal): New types.
	(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
	get_field, and set_field fields.  Add name, field_id, regfile,
	num_regs, and flags fields.
	(xtensa_arg_internal): New type.
	(xtensa_iclass_internal): Change operands field to array of
	xtensa_arg_internal.  Add num_stateOperands, stateOperands,
	num_interfaceOperands, and interfaceOperands fields.
	(xtensa_opcode_internal): Delete length, template, and iclass fields.
	Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
	(opname_lookup_entry): Delete.
	(xtensa_regfile_internal, xtensa_interface_internal,
	xtensa_funcUnit_internal, xtensa_state_internal,
	xtensa_sysreg_internal, xtensa_lookup_entry): New.
	(xtensa_isa_internal): Replace opcode_table field with opcodes field.
	Change type of opname_lookup_table.  Delete num_modules,
	module_opcode_base, module_decode_fn, config, and has_density fields.
	Add num_formats, formats, format_decode_fn, length_decode_fn,
	num_slots, slots, num_fields, num_operands, operands, num_iclasses,
	iclasses, num_regfiles, regfiles, num_states, states,
	state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
	max_sysreg_num, sysreg_table, num_interfaces, interfaces,
	interface_lookup_table, num_funcUnits, funcUnits and
	funcUnit_lookup_table fields.
	(xtensa_isa_module, xtensa_isa_modules): Delete.
	(xtensa_isa_name_compare): New prototype.
	(xtisa_errno, xtisa_error_msg): New.
	* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
	(xtensa_isa): Change type.
	(xtensa_operand): Delete.
	(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
	xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
	xtensa_funcUnit_use): New types.
	(libisa_module_specifier): Delete.
	(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
	(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
	xtensa_insnbuf_from_chars): Update prototypes.
	(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
	xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
	xtensa_encode_insn, xtensa_insn_length,
	xtensa_insn_length_from_first_byte, xtensa_num_operands,
	xtensa_operand_kind, xtensa_encode_result,
	xtensa_operand_isPCRelative): Delete.
	(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
	xtensa_operand_set_field, xtensa_operand_encode,
	xtensa_operand_decode, xtensa_operand_do_reloc,
	xtensa_operand_undo_reloc): Update prototypes.
	(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
	xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
	xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
	xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
	xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
	xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
	xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
	xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
	xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
	xtensa_opcode_is_loop, xtensa_opcode_is_call,
	xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
	xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
	xtensa_opcode_funcUnit_use, xtensa_operand_name,
	xtensa_operand_is_visible, xtensa_operand_is_register,
	xtensa_operand_regfile, xtensa_operand_num_regs,
	xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
	xtensa_stateOperand_state, xtensa_stateOperand_inout,
	xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
	xtensa_regfile_lookup_shortname, xtensa_regfile_name,
	xtensa_regfile_shortname, xtensa_regfile_view_parent,
	xtensa_regfile_num_bits, xtensa_regfile_num_entries,
	xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
	xtensa_state_is_exported, xtensa_sysreg_lookup,
	xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
	xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
	xtensa_interface_num_bits, xtensa_interface_inout,
	xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
	xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
	* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
	R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
	(XTENSA_PROP_SEC_NAME): Define.
	(property_table_entry): Add flags field.
	(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.

ld ChangeLog

	* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
	assembler-generated longcall sequences.  Describe new --size-opt
	option.
	* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
	* emultempl/xtensaelf.em (remove_section,
	replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
	elf_xtensa_after_open): New.
	(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
	OPTION_NO_LITERAL_MOVEMENT): Define.
	(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
	(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
	(PARSE_AND_LIST_OPTIONS): Add --size-opt.
	(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
	OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
	(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
	* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
	* Makefile.am (eelf32xtensa.c): Update dependencies.
	* Makefile.in: Regenerate.

ld/testsuite ChangeLog

	* ld-xtensa/lcall1.s: Use .literal directive.
	* ld-xtensa/lcall2.s: Align function entry.
	* ld-xtensa/coalesce2.s: Likewise.

opcodes ChangeLog

	* xtensa-dis.c (state_names): Delete.
	(fetch_data): Use xtensa_isa_maxlength.
	(print_xtensa_operand): Replace operand parameter with opcode/operand
	pair.  Remove print_sr_name parameter.  Use new xtensa-isa.h functions.
	(print_insn_xtensa): Use new xtensa-isa.h functions.  Handle multislot
	instruction bundles.  Use xmalloc instead of malloc.
2004-10-08 00:22:15 +00:00
Alan Modra
8ea2b00f7f * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/gas.pot: Regenerate.
2004-09-17 06:17:47 +00:00
Mark Mitchell
e5a52504a5 * config.bfd (arm*-*-symbianelf*): Use OS-specific target vectors.
* configure.in (bfd_elf32_bigarm_symbian_vec): Add it.
	(bfd_elf32_littlearm_symbian_vec): Likewise.
	* configure: Regenerated.
	* elf-bfd.h (elf_backend_data): Add dynamic_sec_flags.
	* elf32-arm.h (PLT_HEADER_SIZE): Do not define.
	(PLT_ENTRY_SIZE): Likewise.
	(bfd_vma_elf32_arm_symbian_plt_entry): New
	variable.
	(elf32_arm_link_hash_table): Add plt_header_size, plt_entry_size,
	and symbian_p.
	(create_got_section): Don't create sections when generating BPABI
	objects.
	(elf32_arm_create_dynamic_sections): Tidy.
	(elf32_arm_link_hash_table_create): Set plt_header_size,
	plt_entry_size, and symbian_p.
	(elf32_arm_check_relocs): Do not mark .rel.dyn as loadable when
	generating BPABI objects.
	(allocate_dynrelocs): Use htab->plt_header_size, not
	PLT_HEADER_SIZE.  Do not add to .got.plt when
	generating BPABI objects.
	(elf32_arm_finish_dynamic_symbol): Generate Symbian OS PLTs.
	* elfarm-nabi.c: Add SymbianOS target vectors.
	* elflink.c (_bfd_elf_create_got_section): Use dynamic_sec_flags.
	(_bfd_elf_link_create_dynamic_sections): Likewise.
	* elfxx-target.h (ELF_DYNAMIC_SEC_FLAGS): New macro.
	(elfNN_bed): Use it.
	* targets.c (bfd_elf32_bigarm_symbian_vec): New variable.
	(bfd_elf32_littlearm_symbian_vec): Likewise.
	(_bfd_target_vector): Add them.

	* Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
	* Makefile.in: Regenerated.
	* configure.in: Set em for arm*-*-symbianelf*.
	* configure: Regenerated.
	* config/tc-arm.c (elf32_arm_target_format): Use Symbian target
	vectors when appropriate.
	* config/te-symbian.h: New file.

	* Makefile.am (ALL_EMULATIONS): Add earmsymbian.o.
	(earmsymbian.c): New target.
	* configure.tgt: Use armsymbian emulation for arm*-*-symbianelf*.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* emulparams/armsymbian.sh: New file.
2004-09-03 17:15:44 +00:00
Richard Earnshaw
f263249b3d * config/tc-arm.c: Include include/opcode/arm.h.
(ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
(FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
(FPU_ARCH_*): Delete.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
2004-07-16 22:12:26 +00:00
Nick Clifton
1fe1f39c06 Add new port: crx-elf 2004-07-07 17:28:53 +00:00
Nick Clifton
32137342ec * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
* config/te-netware.h: New file.
* config/te-ppcnw.h: Delete: Obsolete.
* configure.in: Eliminate ill NetWare targets. Make generic
  NetWare target use proper emulation.
* Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
  reference to new te-netware.h.
* configure: Regenerate.
* Makefile.in: Regenerate.
2004-06-18 14:09:41 +00:00
Joern Rennecke
f6f9408fbf 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
bfd:
	* Makefile.am: Regenerate dependencies.
	* Makefile.in: Regenerate.
	* archures.c: Add bfd_mach_sh3_nommu .
	* bfd-in2.h: Regenerate.
	* cpu-sh.c: Add sh3-nommu architecture.
	(bfd_to_arch_table): Create new table.
	(sh_get_arch_from_bfd_mach): Create new function.
	(sh_get_arch_up_from_bfd_mach): Create new function.
	(sh_merge_bfd_arch): Create new function.
	* elf32-sh.c (sh_ef_bfd_table): Add table.
	(sh_elf_check_relocs): Replace switch statement with
	use of sh_ef_bfd_table .
	(sh_elf_get_flags_from_mach): Add new function.
	(sh_find_elf_flags): Likewise.
	(sh_elf_copy_private_data): Replace most of non-elf contents
	with a call to sh_merge_bfd_arch() .

gas:
	* Makefile.am: Regenerate dependecies.
	* Makefile.in: Regenerate.
	* config/tc-sh.c (valid_arch): Make unsigned.
	(preset_target_arch): Likewise.
	(md_begin): Use new architecture flags system.
	(get_specific): Likewise.
	(assemble_ppi): Likewise.
	(md_assemble): Likewise. Also fix error check for bad opcodes.
	(md_parse_option): Likewise. Also generate -isa values according
	to the table in bfd/cpu-sh.c instead of just constants. Also
	allow <arch>-up ISA variants.
	(sh_elf_final_processing): Replace if-else chain with a call to
	sh_find_elf_flags().
	* testsuite/gas/sh/arch: New directory.
	* testsuite/gas/sh/arch/arch.exp: New test script.
	* testsuite/gas/sh/arch/arch_expected.txt: New file.
	* testsuite/gas/sh/arch/sh.s: New file.
	* testsuite/gas/sh/arch/sh2.s: New file.
	* testsuite/gas/sh/arch/sh-dsp.s: New file.
	* testsuite/gas/sh/arch/sh2e.s: New file.
	* testsuite/gas/sh/arch/sh3-nommu.s: New file.
	* testsuite/gas/sh/arch/sh3.s: New file.
	* testsuite/gas/sh/arch/sh3-dsp.s: New file.
	* testsuite/gas/sh/arch/sh3e.s: New file.
	* testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
	* testsuite/gas/sh/arch/sh4-nofpu.s: New file.
	* testsuite/gas/sh/arch/sh4.s: New file.
	* testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
	* testsuite/gas/sh/arch/sh4al-dsp.s: New file.
	* testsuite/gas/sh/arch/sh4a.s: New file.

include/elf:
	* sh.h (EF_SH_HAS_DSP): Remove.
	(EF_SH_HAS_FP): Remove.
	(EF_SH_MERGE_MACH): Remove.
	(EF_SH4_NOFPU): Convert to decimal.
	(EF_SH4A_NOFPU): Likewise.
	(EF_SH4_NOMMU_NOFPU): Likewise.
	(EF_SH3_NOMMU): Add new macro.
	(EF_SH_BFD_TABLE): Likewise.
	(sh_find_elf_flags): Add prototype.
	(sh_elf_get_flags_from_mach): Likewise.

opcodes:
	* sh-dis.c (target_arch): Make unsigned.
	(print_insn_sh): Replace (most of) switch with a call to
	sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
	* sh-opc.h: Redefine architecture flags values.
	Add sh3-nommu architecture.
	Reorganise <arch>_up macros so they make more visual sense.
	(SH_MERGE_ARCH_SET): Define new macro.
	(SH_VALID_BASE_ARCH_SET): Likewise.
	(SH_VALID_MMU_ARCH_SET): Likewise.
	(SH_VALID_CO_ARCH_SET): Likewise.
	(SH_VALID_ARCH_SET): Likewise.
	(SH_MERGE_ARCH_SET_VALID): Likewise.
	(SH_ARCH_SET_HAS_FPU): Likewise.
	(SH_ARCH_SET_HAS_DSP): Likewise.
	(SH_ARCH_UNKNOWN_ARCH): Likewise.
	(sh_get_arch_from_bfd_mach): Add prototype.
	(sh_get_arch_up_from_bfd_mach): Likewise.
	(sh_get_bfd_mach_from_arch_set): Likewise.
	(sh_merge_bfd_arc): Likewise.

ld:
	* testsuite/ld-sh/arch/arch.exp: New test script.
	* testsuite/ld-sh/arch/arch_expected.txt: New file.
	* testsuite/ld-sh/arch/sh.s: New file.
	* testsuite/ld-sh/arch/sh2.s: New file.
	* testsuite/ld-sh/arch/sh-dsp.s: New file.
	* testsuite/ld-sh/arch/sh2e.s: New file.
	* testsuite/ld-sh/arch/sh3-nommu.s: New file.
	* testsuite/ld-sh/arch/sh3.s: New file.
	* testsuite/ld-sh/arch/sh3-dsp.s: New file.
	* testsuite/ld-sh/arch/sh3e.s: New file.
	* testsuite/ld-sh/arch/sh4-nommu-nofpu.s: New file.
	* testsuite/ld-sh/arch/sh4-nofpu.s: New file.
	* testsuite/ld-sh/arch/sh4.s: New file.
	* testsuite/ld-sh/arch/sh4a-nofpu.s: New file.
	* testsuite/ld-sh/arch/sh4al-dsp.s: New file.
	* testsuite/ld-sh/arch/sh4a.s: New file.
2004-05-28 12:32:10 +00:00
Daniel Jacobowitz
bfbdcf0474 * Makefile.am (DIST_SUBDIRS): Define.
* aclocal.m4: Regenerate with automake 1.8.4.
	* Makefile.in: Likewise.
	* doc/Makefile.in: Likewise.
2004-05-07 06:23:54 +00:00
Thiemo Seufer
279500dea9 /bfd/ChangeLog
* config.bfd: Remove mips*-*-mach3* and mips*-dec-mach3* targets.
	* configure.in: Remove mips-dec-bsd*, mips-dec-mach3*, mips-*-mach3*
	targets amd aout_mips_big_vec, aout_mips_little_vec target vectors.
	* configure: Regenerate.

	/gas/ChangeLog
	* Makefile.am: Remove mips from aout targets.
	* Makefile.in: Regenerate.
	* configure.in: Remove mips-dec-bsd* target.
	* configure: Regenerate.

	/ld/ChangeLog
	* configure.host: Remove mips*-dec-bsd* target.
	* configure.tgt: Likewise.
2004-04-11 04:07:46 +00:00
Alan Modra
6e1772d5c0 * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* config.in: Regenerate.
	* po/gas.pot: Regenerate.
2004-03-19 07:05:56 +00:00
Kaz Kojima
2ce4cc6025 [gas]
* config/tc-sh.c: Include dw2gencfi.h.
	(sh_cfi_frame_initial_instructions): New function.
	(sh_regname_to_dw2regnum): Likewise.
	* config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
	file.
	(TARGET_USE_CFIPOP): Define.
	(tc_cfi_frame_initial_instructions): Likewise.
	(tc_regname_to_dw2regnum): Likewise.
	(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
	* Makefile.am: Update dependencies.
	* Makefile.in: Regenerate.

[gas/testsuite]
	* gas/cfi/cfi-sh-1.d: New file.
	* gas/cfi/cfi-sh-1.s: Likewise.
	* gas/cfi/cfi.exp: Add SH case.
2004-03-18 00:49:23 +00:00
Maciej W. Rozycki
2251dd8905 * Makefile.am (Makefile): Move the dependency on
$(BFDDIR)/configure.in to...
(CONFIG_STATUS_DEPENDENCIES): ... here.
(AUTOMAKE_OPTIONS): Require automake 1.8.
* Makefile.in: Regenerate.
* doc/Makefile.am (BASEDIR, BFDDIR): Define.
(CONFIG_STATUS_DEPENDENCIES): Add a dependency on
$(BFDDIR)/configure.in here as well.
* doc/Makefile.in: Regenerate.
2004-01-05 22:16:05 +00:00
Maciej W. Rozycki
c658116845 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* doc/Makefile.am (install, install-info): Remove.
(install-data-local): A new hook for install-info.
(AUTOMAKE_OPTIONS): Require automake 1.8.
* doc/Makefile.in: Regenerate.
2004-01-05 22:13:52 +00:00
Alan Modra
9fa06c65f0 make "dep-am" 2003-12-02 08:14:35 +00:00
Daniel Jacobowitz
5e2d1ae86d * Makefile.am (install, install-info, RECURSIVE_TARGETS): Define.
* doc/Makefile.am (install-info): Define.

	* aclocal.m4: Regenerate.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
2003-11-12 17:15:38 +00:00
Alan Modra
da64f3bf47 * dep-in.sed: Remove libintl.h. Ignore include/fpoen-*.h
* Makefile.am (POTFILES.in): Unset LC_COLLATE.
	Run "make dep-am".
	* Makefile.in: Regenerate.
2003-08-14 07:04:09 +00:00
Nick Clifton
278ed1281c Remove uses of ctype.h 2003-07-14 10:06:06 +00:00
Nick Clifton
685736be24 Update .comm error messages to assume an unsigned value.
Update relaxing code to work in 64-bit address spaces.
2003-06-24 11:10:47 +00:00
Alan Modra
795bb480ca * bfd/Makefile.am (config.status): Depend on version.h.
Run "make dep-am" in bfd/ and elsewhere, and regen files.
2003-06-10 23:44:42 +00:00
Nick Clifton
87ccc1b08d Move .file and .loc pseudo ops into obj-elf.c 2003-05-21 12:07:56 +00:00
Alan Modra
54cfded08e * dw2gencfi.c, dw2gencfi.h: New files.
* config/tc-i386.c (tc_x86_cfi_init): New function.
	* config/tc-i386.h (TARGET_USE_CFIPOP, tc_cfi_init): New defines.
	* as.c (parse_args): Set verbose flag on --verbose.
	(main): Call tc_cfi_init()/cfi_finish().
	* as.h (verbose): New external variable.
	* read.c (pobegin): Insert CFI pops to the list.
	* symbols.c (local_symbol_make): Make symbol external.
	* symbols.h (local_symbol_make): New prototype.
	* Makefile.am: Add dw2gencfi.[ch] files.  Run "make dep-am".
	* Makefile.in: Regenerate.
	* doc/as.texinfo: Added node "CFI directives" with description of
	all implemented .cfi_* directives.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
2003-05-20 07:58:07 +00:00
Nick Clifton
2c8714f20f Add support for dwarf2 debug information. 2003-04-24 12:47:32 +00:00
Nick Clifton
e0001a05d2 Add Xtensa port 2003-04-01 15:50:31 +00:00
Alan Modra
f0abc2a11f include/elf/ChangeLog
* sh.h: Split out various bits to bfd/elf32-sh64.h.

include/opcode/ChangeLog
	* m68hc11.h (cpu6812s): Define.

bfd/ChangeLog
	* elf-bfd.h (struct bfd_elf_section_data): Remove tdata.  Change
	dynindx to an int.  Rearrange for better packing.
	* elf.c (_bfd_elf_new_section_hook): Don't alloc if already done.
	* elf32-mips.c (bfd_elf32_new_section_hook): Define.
	* elf32-sh64.h: New.  Split out from include/elf/sh.h.
	(struct _sh64_elf_section_data): New struct.
	(sh64_elf_section_data): Don't dereference sh64_info (was tdata).
	* elf32-sh64-com.c: Include elf32-sh64.h.
	* elf32-sh64.c: Likewise.
	(sh64_elf_new_section_hook): New function.
	(bfd_elf32_new_section_hook): Define.
	(sh64_elf_fake_sections): Adjust for sh64_elf_section_data change.
	(sh64_bfd_elf_copy_private_section_data): Likewise.
	(sh64_elf_final_write_processing): Likewise.
	* elf32-sparc.c (struct elf32_sparc_section_data): New.
	(elf32_sparc_new_section_hook): New function.
	(SET_SEC_DO_RELAX, SEC_DO_RELAX): Delete.
	(sec_do_relax): Define.
	(elf32_sparc_relax_section): Adjust to use sec_do_relax.
	(elf32_sparc_relocate_section): Likewise.
	* elf64-mips.c (bfd_elf64_new_section_hook): Define.
	* elf64-mmix.c (struct _mmix_elf_section_data): New.
	(mmix_elf_section_data): Define.  Use throughout file.
	(mmix_elf_new_section_hook): New function.
	(bfd_elf64_new_section_hook): Define.
	* elf64-ppc.c (struct _ppc64_elf_section_data): New.
	(ppc64_elf_section_data): Define.  Use throughout.
	(ppc64_elf_new_section_hook): New function.
	(bfd_elf64_new_section_hook): Define.
	* elf64-sparc.c (struct sparc64_elf_section_data): New.
	(sparc64_elf_new_section_hook): New function.
	(SET_SEC_DO_RELAX, SEC_DO_RELAX): Delete.
	(sec_do_relax): Define.
	(sparc64_elf_relax_section): Adjust to use sec_do_relax.
	(sparc64_elf_relocate_section): Likewise.
	(bfd_elf64_new_section_hook): Define.
	* elfn32-mips.c (bfd_elf32_new_section_hook): Define.
	* elfxx-mips.c (struct _mips_elf_section_data): New.
	(mips_elf_section_data): Define.  Use throughout.
	(_bfd_mips_elf_new_section_hook): New function.
	(mips_elf_create_got_section): Don't alloc used_by_bfd.
	* elfxx-mips.h (_bfd_mips_elf_new_section_hook): Declare.
	* elfxx-target.h (bfd_elfNN_new_section_hook): Add #ifndef.
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

opcodes/ChangeLog
	* sh64-dis.c: Include elf32-sh64.h.
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

gas/ChangeLog
	* config/tc-sh64.c (shmedia_frob_section_type): Adjust for changed
	sh64_elf_section_data.
	* config/tc-sh64.h: Include elf32-sh64.h.
	* config/tc-m68hc11.c: Don't include stdio.h.
	(md_show_usage): Fix missing continuation.
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

ld/ChangeLog
	* emultempl/sh64elf.em: Include elf32-sh64.h.
	(sh64_elf_${EMULATION_NAME}_before_allocation): Adjust for changed
	sh64_elf_section_data.
	(sh64_elf_${EMULATION_NAME}_after_allocation): Likewise.
2003-01-23 11:51:35 +00:00
Alan Modra
f62ba8f237 * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
2003-01-16 04:11:36 +00:00
Nick Clifton
2469cfa284 Add support for msp430. 2002-12-30 19:25:13 +00:00
Nick Clifton
fea179166e Remove GASP. 2002-12-02 15:42:15 +00:00
Svein Seldal
98199d8f1c * Makefile.am: Added tic4x dependecy
* Makefile.in: Regenerate
2002-11-11 14:58:49 +00:00
Alan Modra
4001ad8ce4 * configure.in (BFDVER_H): Set and subst.
* dep-in.sed: Replace bfdver.h with $(BFDVER_H).
	* Makefile.am: Run "make dep-am".
	(BFDVER_H): Define.
	* configure: Regenerate.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
2002-10-16 13:27:04 +00:00
Alan Modra
b95d15c6c5 * Makefile.am: Run "make dep-am".
(CPU_OBJ_VALID): sh64 coff is invalid.
	* as.c: #include "bfdver.h".
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
2002-10-14 12:08:47 +00:00
Alan Modra
6539b54baf * config/tc-i386.c (md_apply_fix3): Replace S_IS_EXTERNAL,
S_IS_WEAK etc. with S_FORCE_RELOC call.  Correct comment.
	Rename "fseg" to "sym_seg".
	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
2002-09-21 10:39:17 +00:00
Alan Modra
55eab186a3 * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* config.in: Regenerate.
	* po/POTFILES.in: Regenerate.
2002-07-23 12:46:43 +00:00
Nick Clifton
a40cbfa3c9 Add IP2k GAS and OPCODES support. 2002-07-19 07:52:40 +00:00
Alan Modra
ce4f738593 * Makefile.am (check-DEJAGNU): Revert 2002-06-25 change.
Run "make dep-am".
	* Makefile.in: Regenerate.
2002-07-02 23:56:53 +00:00
H.J. Lu
a13a0de813 2002-06-25 H.J. Lu <hjl@gnu.org>
* Makefile.am (check-DEJAGNU): Set LC_ALL=C and export it.
	* Makefile.in: Regenerated.
2002-06-26 01:12:32 +00:00
Dave Brolley
0ebb9a87eb 2002-06-18 Dave Brolley <brolley@redhat.com>
From Catherine Moore, Michael Meissner, Richard Sandiford, Dave Brolley:
	* po/POTFILES.in: Add tc-frv.c, tc-frv.h.
	* configure.in: Support frv-*-*.
	* Makefile.am (CPU_TYPES): Add frv.
	(TARGET_CPU_CFILES): Add tc-frv.c.
	(TARGET_CPU_HFILES): Add tc-frv.h.
	(DEPTC_frv_coff): New variable.
	(DEPTC_frv_elf): New variable.
	(DEPOBJ_frv_coff): New variable.
	(DEPOBJ_frv_elf): New variable.
	(DEP_frv_coff): New variable.
	(DEP_frv_elf): New variable.
	* tc-frv.c: New file.
	* tc-frv.h: New file.
2002-06-18 21:15:21 +00:00
Alan Modra
e90b95f66d * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
2002-06-08 08:45:03 +00:00
Alan Modra
194b521088 * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
2002-05-31 04:27:37 +00:00
Nick Clifton
d172d4ba03 Add DLX target 2002-05-28 14:08:47 +00:00
Alan Modra
29589b0c52 * Makefile.am (OBJS): Depend on ansidecl.h and fopen-same.h.
* Makefile.in: Regenerate.
	* dep-in.sed: Reorder to match OBJS in Makefile.am.
	* configure.in (ALL_OBJ_DEPS): Add symcat.h when need_bfd.
	* configure: Regenerate.
	* as.h: Use #include "" instead of <> for local header files.
	* flonum-konst.c: Likewise.
	* flonum-mult.c: Likewise.
	* gasp.c: Likewise.
	* listing.c: Likewise.
	* config/tc-ia64.h: Likewise.
	* config/tc-v850.h: Likewise.
2002-05-25 12:53:29 +00:00
Nick Clifton
d3d8a9ee19 Honour DESTDIR 2002-05-07 17:22:20 +00:00
Alan Modra
8e42bcb6b9 * dep-in.sed: Cope with absolute paths.
* Makefile.am (dep.sed): Subst TOPDIR.
	Run "make dep-am".
	* Makefile.in: Regenerate.
2002-04-04 14:07:22 +00:00
Alan Modra
d5b32339ee * Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
2002-03-21 09:40:17 +00:00
Nick Clifton
eb1e0e807a Add AIX 64 shared library support and emulation layer for binutils 2002-03-18 12:46:27 +00:00