Preliminary Notes on Porting GNU ld
	-----------------------------------

Before porting ld itself, you will need to port the BFD library;
see ../bfd/PORTING.

The 'host' is the system a tool runs *on*.
The 'target' is the system a tool runs *for*, i.e.
a tool can read/write the binaries of the target.
Most often, host==target, but ld supports cross-linking
(and to some extent the same ld binary can be used a linker
for multiple target rachitectures).

Porting to a new host
---------------------
Pick a name for your host. Call that <host>.
You need to create the file config/mh-<host>.

Porting to a new target
-----------------------
Pick a name for your target. Call that <target>.
You need to create at least config/mt-<target>.
It should contain
	EMUL=<emulation>
An <emulation> controls the "personality" of ld,
such as the default linker script.  Usually, the
<emulation> will have teh same name as the <target>,
and you will need to create a new <emulation> (see below).

You will also need to edit Makefile.in and possible configure.in.
To see how to do that, search for existing examples (e.g. sun3,
sun4, hp300bsd).

Porting to a new emulation target
---------------------------------
Pick a name for your target. Call that <emulation>.
Usually, <emulation> and <target> are the same.
You need to create at least <emulation>.sh.
You will also need to edit Makefile.in,
To see how to do that, search for existing examples.

The file <emulation>.sh defines a set of parameter that
are used to generate the emulation.  Its syntax is that
of a (Bourne) shell script, and it is "sourced" by genscripts.sh.

Writing <emulation.sh>
----------------------

Usually, <emulation>.sh contains:
	EMULATION_NAME=<emulation>
	SCRIPT_NAME=<script>
	OUTPUT_FORMAT="<target-name>"
	TEXT_START_ADDR=<text_start_addr>
	PAGE_SIZE=<page_size>
	SEGMENT_SIZE=<segment_size>  # If different from PAGE_SIZE.
	ARCH=<arch>

<target-name>
	Matches the 'filename' field of the bfd_target you want
	to use.  (This is a string, and currently the first field.)
	For an a.out target, <target-name> matches the TARGETNAME
	defined in ../bfd/<target>.c.

<arch>
	The architecture: e.g. m68k, sparc, ...

<script>
	The file <script>.sc-sh is a shell script which when
	eveluated (by genscripts.sh) writes a linker script
	file to standard output.  You may need to write a new
	script.  If you use the a.out format or something
	similar, you can probably set
		SCRIPT_NAME=aout

<text_start_addr>
<page_size>
<segment_size>
	These set the shell variables TEXT_START_ADDR, PAGE_SIZE,
	and SEGEMNT_SIZE for use by <script>.sc-sh.
	If your script doesn't use these variables, you
	don't have to define the variables,
	For emulations using a.out files, you can get these
	values from ../bfd/<target>c.

In some cases, you may need more more definitions.
For example, if you can't use generic.em,
you may need to add:
	TEMPLATE_NAME=<emulation>
and write your own <emulation>.em file.

Writing a new <script>.sc-sh
----------------------------

You may need to write a new script file for your emulation.

Your script can use the shell variable LD_FLAG, which has the value:
LD_FLAG=	when building a script to be used by default
LD_FLAG=n	when building a script to be used for ld -n
LD_FLAG=N	when building a script to be used for ld -N
LD_FLAG=r	when building a script to be used for ld -r
LD_FLAG=u	when building a script to be used for ld -Ur

The variable RELOCATING is only set if relocation is happening
(i.e. unless the linker is invoked with -r).
Thus your script should has an action ACTION
that should only be done when relocating,
express that as:
	${RELOCATING+ ACTION}
In general, this is the case for most assignments, which should look like:
	${RELOCATING+ _end = .}

Also, you should assign absolute addresses to sections only
when relocating, so:
	  .text ${RELOCATING+ ${TEXT_START_ADDR}}:

The forms:
	 .section { ... } > section
should be:
	 .section { ... } > ${RELOCATING+ section}

RELOCATING is set except when LD_FLAG=r or LD_FLAG=u.
CONSTRUCTING is set except when LD_FLAG=u.

Alignment of the data segments is controlled by the variables
DATA_ALIGNMENT_ (note trailing underscore), DATA_ALIGNMENT_n,
DATA_ALIGNMENT_N, DATA_ALIGNMENT_r, or DTA_ALIGNMENT_u
depending on LD_FLAGS's value.
Normally, the default value works (this is "ALIGN(${SEGMENT_SIZE})"
for the _n, and __ (default) variants; "." for the _N, variant;
and "" for the _r and _u variants).

Handling -n and -N style binaries in your linker script
-------------------------------------------------------

The -n linker flag requests the linker to create a binary
with a write-protected text segment, but not demand-pagable (NMAGIC).
Sunos starts the text segment for demand-paged binaries at 0x2020
and other binaries at 0x2000, since the exec header (0x20 bytes)
is paged in with the text.  Some other Unix variants do the same.

In that case, the <emulation.sh> should define:

NONPAGED_TEXT_START_ADDR
	The text start address to use when linking with -n or -N flags.

For example, on a sun4:
	TEXT_START_ADDR=0x2020
	NONPAGED_TEXT_START_ADDR=0x2000

The -N linker flag requests the linker to create a binary
without a write-protected text segment (NMAGIC).
This is like -n, except that the data segment needs not be page-aligned.