darling-gdb/gdb/z8k-tdep.c
Thomas Lord 199b2450f6 Change the stream argument to _filtered to GDB_FILE *.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.

Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')

Replaced calls to fopen for output to gdb_fopen.

Added sufficient goo to utils.c and defs.h to make the above work.

The net effect is that stdio output functions are only directly used
in utils.c.  Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.

In the near future, GDB_FILE will stop being equivalant to FILE.

The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior.  The testsuite doesn't notice anything
like this, though.

Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code.  All output from commands
should go to a GDB_FILE.

Target-specific code can still use stdio directly to communicate with
targets.
1993-11-01 22:25:23 +00:00

476 lines
10 KiB
C

/* Target-machine dependent code for Zilog Z8000, for GDB.
Copyright (C) 1992,1993 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/*
Contributed by Steve Chamberlain
sac@cygnus.com
*/
#include "defs.h"
#include "frame.h"
#include "obstack.h"
#include "symtab.h"
#include "gdbcmd.h"
#include "gdbtypes.h"
#include "dis-asm.h"
/* Return the saved PC from this frame.
If the frame has a memory copy of SRP_REGNUM, use that. If not,
just use the register SRP_REGNUM itself. */
CORE_ADDR
frame_saved_pc (frame)
FRAME frame;
{
return (read_memory_pointer (frame->frame + (BIG ? 4 : 2)));
}
#define IS_PUSHL(x) (BIG ? ((x & 0xfff0) == 0x91e0):((x & 0xfff0) == 0x91F0))
#define IS_PUSHW(x) (BIG ? ((x & 0xfff0) == 0x93e0):((x & 0xfff0)==0x93f0))
#define IS_MOVE_FP(x) (BIG ? x == 0xa1ea : x == 0xa1fa)
#define IS_MOV_SP_FP(x) (BIG ? x == 0x94ea : x == 0x0d76)
#define IS_SUB2_SP(x) (x==0x1b87)
#define IS_MOVK_R5(x) (x==0x7905)
#define IS_SUB_SP(x) ((x & 0xffff) == 0x020f)
#define IS_PUSH_FP(x) (BIG ? (x == 0x93ea) : (x == 0x93fa))
/* work out how much local space is on the stack and
return the pc pointing to the first push */
static CORE_ADDR
skip_adjust (pc, size)
CORE_ADDR pc;
int *size;
{
*size = 0;
if (IS_PUSH_FP (read_memory_short (pc))
&& IS_MOV_SP_FP (read_memory_short (pc + 2)))
{
/* This is a function with an explict frame pointer */
pc += 4;
*size += 2; /* remember the frame pointer */
}
/* remember any stack adjustment */
if (IS_SUB_SP (read_memory_short (pc)))
{
*size += read_memory_short (pc + 2);
pc += 4;
}
return pc;
}
int
examine_frame (pc, regs, sp)
CORE_ADDR pc;
struct frame_saved_regs *regs;
CORE_ADDR sp;
{
int w = read_memory_short (pc);
int offset = 0;
int regno;
for (regno = 0; regno < NUM_REGS; regno++)
regs->regs[regno] = 0;
while (IS_PUSHW (w) || IS_PUSHL (w))
{
/* work out which register is being pushed to where */
if (IS_PUSHL (w))
{
regs->regs[w & 0xf] = offset;
regs->regs[(w & 0xf) + 1] = offset + 2;
offset += 4;
}
else
{
regs->regs[w & 0xf] = offset;
offset += 2;
}
pc += 2;
w = read_memory_short (pc);
}
if (IS_MOVE_FP (w))
{
/* We know the fp */
}
else if (IS_SUB_SP (w))
{
/* Subtracting a value from the sp, so were in a function
which needs stack space for locals, but has no fp. We fake up
the values as if we had an fp */
regs->regs[FP_REGNUM] = sp;
}
else
{
/* This one didn't have an fp, we'll fake it up */
regs->regs[SP_REGNUM] = sp;
}
/* stack pointer contains address of next frame */
/* regs->regs[fp_regnum()] = fp;*/
regs->regs[SP_REGNUM] = sp;
return pc;
}
CORE_ADDR
z8k_skip_prologue (start_pc)
CORE_ADDR start_pc;
{
struct frame_saved_regs dummy;
return examine_frame (start_pc, &dummy, 0);
}
CORE_ADDR
addr_bits_remove (x)
CORE_ADDR x;
{
return x & PTR_MASK;
}
read_memory_pointer (x)
CORE_ADDR x;
{
return read_memory_integer (ADDR_BITS_REMOVE (x), BIG ? 4 : 2);
}
FRAME_ADDR
frame_chain (thisframe)
FRAME thisframe;
{
if (thisframe->prev == 0)
{
/* This is the top of the stack, let's get the sp for real */
}
if (!inside_entry_file ((thisframe)->pc))
{
return read_memory_pointer ((thisframe)->frame);
}
return 0;
}
init_frame_pc ()
{
abort ();
}
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special:
the address we return for it IS the sp for the next frame. */
void
get_frame_saved_regs (frame_info, frame_saved_regs)
struct frame_info *frame_info;
struct frame_saved_regs *frame_saved_regs;
{
CORE_ADDR pc;
int w;
memset (frame_saved_regs, '\0', sizeof (*frame_saved_regs));
pc = get_pc_function_start (frame_info->pc);
/* wander down the instruction stream */
examine_frame (pc, frame_saved_regs, frame_info->frame);
}
void
z8k_push_dummy_frame ()
{
abort ();
}
int
print_insn (memaddr, stream)
CORE_ADDR memaddr;
GDB_FILE *stream;
{
disassemble_info info;
GDB_INIT_DISASSEMBLE_INFO(info, stream);
if (BIG)
{
return print_insn_z8001 ((bfd_vma) memaddr, &info);
}
else
{
return print_insn_z8002 ((bfd_vma) memaddr, &info);
}
}
/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
is not the address of a valid instruction, the address of the next
instruction beyond ADDR otherwise. *PWORD1 receives the first word
of the instruction.*/
CORE_ADDR
NEXT_PROLOGUE_INSN (addr, lim, pword1)
CORE_ADDR addr;
CORE_ADDR lim;
short *pword1;
{
char buf[2];
if (addr < lim + 8)
{
read_memory (addr, buf, 2);
*pword1 = extract_signed_integer (buf, 2);
return addr + 2;
}
return 0;
}
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special:
the address we return for it IS the sp for the next frame.
We cache the result of doing this in the frame_cache_obstack, since
it is fairly expensive. */
void
frame_find_saved_regs (fip, fsrp)
struct frame_info *fip;
struct frame_saved_regs *fsrp;
{
int locals;
CORE_ADDR pc;
CORE_ADDR adr;
int i;
memset (fsrp, 0, sizeof *fsrp);
pc = skip_adjust (get_pc_function_start (fip->pc), &locals);
{
adr = fip->frame - locals;
for (i = 0; i < 8; i++)
{
int word = read_memory_short (pc);
pc += 2;
if (IS_PUSHL (word))
{
fsrp->regs[word & 0xf] = adr;
fsrp->regs[(word & 0xf) + 1] = adr - 2;
adr -= 4;
}
else if (IS_PUSHW (word))
{
fsrp->regs[word & 0xf] = adr;
adr -= 2;
}
else
break;
}
}
fsrp->regs[PC_REGNUM] = fip->frame + 4;
fsrp->regs[FP_REGNUM] = fip->frame;
}
int
saved_pc_after_call ()
{
return addr_bits_remove
(read_memory_integer (read_register (SP_REGNUM), PTR_SIZE));
}
extract_return_value(type, regbuf, valbuf)
struct type *type;
char *regbuf;
char *valbuf;
{
int b;
int len = TYPE_LENGTH(type);
for (b = 0; b < len; b += 2) {
int todo = len - b;
if (todo > 2)
todo = 2;
memcpy(valbuf + b, regbuf + b, todo);
}
}
void
write_return_value(type, valbuf)
struct type *type;
char *valbuf;
{
int reg;
int len;
for (len = 0; len < TYPE_LENGTH(type); len += 2)
{
write_register_bytes(REGISTER_BYTE(len /2 + 2), valbuf + len, 2);
}
}
void
store_struct_return(addr, sp)
CORE_ADDR addr;
CORE_ADDR sp;
{
write_register(2, addr);
}
void
print_register_hook (regno)
int regno;
{
if ((regno & 1) == 0 && regno < 16)
{
unsigned short l[2];
read_relative_register_raw_bytes (regno, (char *) (l + 0));
read_relative_register_raw_bytes (regno + 1, (char *) (l + 1));
printf_unfiltered ("\t");
printf_unfiltered ("%04x%04x", l[0], l[1]);
}
if ((regno & 3) == 0 && regno < 16)
{
unsigned short l[4];
read_relative_register_raw_bytes (regno, (char *) (l + 0));
read_relative_register_raw_bytes (regno + 1, (char *) (l + 1));
read_relative_register_raw_bytes (regno + 2, (char *) (l + 2));
read_relative_register_raw_bytes (regno + 3, (char *) (l + 3));
printf_unfiltered ("\t");
printf_unfiltered ("%04x%04x%04x%04x", l[0], l[1], l[2], l[3]);
}
if (regno == 15)
{
unsigned short rval;
int i;
read_relative_register_raw_bytes (regno, (char *) (&rval));
printf_unfiltered ("\n");
for (i = 0; i < 10; i += 2)
{
printf_unfiltered ("(sp+%d=%04x)", i, read_memory_short (rval + i));
}
}
}
void
register_convert_to_virtual (regnum, from, to)
unsigned char *from;
unsigned char *to;
{
to[0] = from[0];
to[1] = from[1];
to[2] = from[2];
to[3] = from[3];
}
void
register_convert_to_raw (regnum, to, from)
char *to;
char *from;
{
to[0] = from[0];
to[1] = from[1];
to[2] = from[2];
to[3] = from[3];
}
void
z8k_pop_frame ()
{
}
struct cmd_list_element *setmemorylist;
void
z8k_set_pointer_size (newsize)
int newsize;
{
static int oldsize = 0;
if (oldsize != newsize)
{
printf_unfiltered ("pointer size set to %d bits\n", newsize);
oldsize = newsize;
if (newsize == 32)
{
BIG = 1;
}
else
{
BIG = 0;
}
_initialize_gdbtypes ();
}
}
static void
segmented_command (args, from_tty)
char *args;
int from_tty;
{
z8k_set_pointer_size (32);
}
static void
unsegmented_command (args, from_tty)
char *args;
int from_tty;
{
z8k_set_pointer_size (16);
}
static void
set_memory (args, from_tty)
char *args;
int from_tty;
{
printf_unfiltered ("\"set memory\" must be followed by the name of a memory subcommand.\n");
help_list (setmemorylist, "set memory ", -1, gdb_stdout);
}
void
_initialize_z8ktdep ()
{
add_prefix_cmd ("memory", no_class, set_memory,
"set the memory model", &setmemorylist, "set memory ", 0,
&setlist);
add_cmd ("segmented", class_support, segmented_command,
"Set segmented memory model.", &setmemorylist);
add_cmd ("unsegmented", class_support, unsegmented_command,
"Set unsegmented memory model.", &setmemorylist);
}