darling-gdb/bfd/coff-rs6000.c
Steve Chamberlain c9301d7bcf coff-i386.c
Fixed the RTYPETOHOWTO -> TYPE2HOWTO
coff-mips.c coff-rs6000.c
	Can't read relocs, so provide empty macro
1991-11-27 21:57:48 +00:00

560 lines
16 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* IBM RS/6000 "XCOFF" back-end for BFD.
Copyright (C) 1990, 1991 Free Software Foundation, Inc.
Written by Metin G. Ozisik, Mimi Phûông-Thåo Võ, and John Gilmore.
Archive support from Damon A. Permezel.
Contributed by IBM Corporation and Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* This port currently only handles reading object files, except when
compiled on an RS/6000 host. -- no archive support, no core files.
In all cases, it does not support writing.
FIXMEmgo comments are left from Metin Ozisik's original port. */
/* Internalcoff.h and coffcode.h modify themselves based on this flag. */
#define RS6000COFF_C 1
#include "bfd.h"
#include "sysdep.h"
#include "libbfd.h"
#include "obstack.h"
#include "internalcoff.h"
#include "coff-rs6000.h"
#include "libcoff.h"
/* The main body of code is in coffcode.h. */
/* Can't read rs6000 relocs */
#define RTYPE2HOWTO(a,b)
#include "coffcode.h"
#define coff_archive_p bfd_generic_archive_p
#define coff_mkarchive _bfd_generic_mkarchive
#ifdef ARCHIVES_PLEASE
/* ------------------------------------------------------------------------ */
/* Support for archive file stuff.. */
/* Stolen from Damon A. Permezel's `bfd' portation. */
/* ------------------------------------------------------------------------ */
#undef coff_openr_next_archived_file
#define coff_openr_next_archived_file rs6000coff_openr_next_archived_file
#undef coff_write_armap
#define coff_write_armap rs6000coff_write_armap
#undef coff_stat_arch_elt
#define coff_stat_arch_elt rs6000coff_stat_arch_elt
#undef coff_snarf_ar_hdr
#define coff_snarf_ar_hdr rs6000coff_snarf_ar_hdr
#undef coff_mkarchive
#define coff_mkarchive rs6000coff_mkarchive
#undef coff_archive_p
#define coff_archive_p rs6000coff_archive_p
#include "/usr/include/ar.h" /* <ar.h> doesn't do it. */
#define arch_hdr(bfd) \
((struct ar_hdr *) \
(((struct areltdata *)((bfd)->arelt_data))->arch_header))
static boolean
rs6000coff_mkarchive (abfd)
bfd *abfd;
{
bfd_error = invalid_operation; /* write not supported */
}
/* This functions reads an arch header and returns an areltdata pointer, or
NULL on error.
Presumes the file pointer is already in the right place (ie pointing
to the ar_hdr in the file). Moves the file pointer; on success it
should be pointing to the front of the file contents; on failure it
could have been moved arbitrarily.
*/
struct areltdata *
rs6000coff_snarf_ar_hdr (abfd)
bfd *abfd;
{
extern int errno;
struct {
struct ar_hdr hdr;
char namebuf[256];
} h;
int size;
struct areltdata *ared;
unsigned int namelen = 0;
char *allocptr;
size = sizeof (h.hdr);
if (bfd_read(&h.hdr, 1, size, abfd) != size) {
bfd_error = no_more_archived_files;
return NULL;
}
size = atoi(h.hdr.ar_namlen); /* ar_name[] length */
size += size & 1;
if (bfd_read(&h.hdr._ar_name.ar_name[2], 1, size, abfd) != size) {
bfd_error = no_more_archived_files;
return NULL;
}
if (strncmp(h.hdr._ar_name.ar_fmag + size, AIAFMAG, 2)) {
bfd_error = malformed_archive;
return NULL;
}
h.hdr._ar_name.ar_name[size] = 0; /* terminate filename */
/*
* if the filename is NULL, we're (probably) at the end.
*/
if (size == 0) {
bfd_error = no_more_archived_files;
return NULL;
}
size += sizeof (h.hdr);
allocptr = bfd_zalloc(abfd, sizeof (*ared) + size);
if (allocptr == NULL) {
bfd_error = no_memory;
return NULL;
}
ared = (struct areltdata *) allocptr;
ared->arch_header = (void *) (allocptr + sizeof (struct areltdata));
memcpy ((char *) ared->arch_header, &h.hdr, size);
ared->parsed_size = atoi(h.hdr.ar_size);
ared->filename = ((AR_HDR*) ared->arch_header)->_ar_name.ar_name;
return ared;
}
/* Stolen directly from archive.c, except it calls rs6000coff_snarf_ar_hdr.
Why wasn't this part of the transfer vector? */
bfd *
rs6000coff_get_elt_at_filepos (archive, filepos)
bfd *archive;
file_ptr filepos;
{
struct areltdata *new_areldata;
bfd *n_nfd;
n_nfd = look_for_bfd_in_cache (archive, filepos);
if (n_nfd) return n_nfd;
if (0 > bfd_seek (archive, filepos, SEEK_SET)) {
bfd_error = system_call_error;
return NULL;
}
if ((new_areldata = rs6000coff_snarf_ar_hdr (archive)) == NULL) return NULL;
n_nfd = _bfd_create_empty_archive_element_shell (archive);
if (n_nfd == NULL) {
bfd_release (archive, (PTR)new_areldata);
return NULL;
}
n_nfd->origin = bfd_tell (archive);
n_nfd->arelt_data = (PTR) new_areldata;
n_nfd->filename = new_areldata->filename;
if (add_bfd_to_cache (archive, filepos, n_nfd))
return n_nfd;
/* huh? */
bfd_release (archive, (PTR)n_nfd);
bfd_release (archive, (PTR)new_areldata);
return NULL;
}
/*
* xcoff_openr_next_archived_file - xcoff has nxt/prv seek addrs.
*/
static bfd *
rs6000coff_openr_next_archived_file(archive, last_file)
bfd *archive, *last_file;
{
file_ptr filestart;
if (!last_file)
filestart = bfd_ardata(archive)->first_file_filepos;
else
filestart = atol(arch_hdr(last_file)->ar_nxtmem);
return rs6000coff_get_elt_at_filepos (archive, filestart);
}
static bfd_target *
rs6000coff_archive_p (abfd)
bfd *abfd;
{
struct fl_hdr hdr;
register struct artdata *art;
if (bfd_read (&hdr, sizeof (hdr), 1, abfd) != sizeof (hdr)) {
bfd_error = wrong_format;
return 0;
}
if (strncmp(hdr.fl_magic, AIAMAG, SAIAMAG)) {
bfd_error = wrong_format;
return 0;
}
/*
* bfd_ardata() accesses the bfd->tdata field.
*/
abfd->tdata = (void *) bfd_zalloc(abfd, sizeof (*art) + sizeof (hdr));
if ((art = bfd_ardata (abfd)) == NULL) {
bfd_error = no_memory;
return 0;
}
art->first_file_filepos = atoi(hdr.fl_fstmoff);
*(struct fl_hdr *) (1 + art) = hdr;
/* Someday...
* slurp in the member table, which I think is the armap equivalent.
xcoff_slurp_armap(abfd);
*/
return abfd->xvec;
}
static int
rs6000coff_stat_arch_elt(abfd, buf)
bfd *abfd;
struct stat *buf;
{
struct ar_hdr *hdr;
char *aloser;
if (abfd->arelt_data == NULL) {
bfd_error = invalid_operation;
return -1;
}
hdr = arch_hdr (abfd);
#define foo(arelt, stelt, size) \
buf->stelt = strtol (hdr->arelt, &aloser, size); \
if (aloser == hdr->arelt) return -1;
foo (ar_date, st_mtime, 10);
foo (ar_uid, st_uid, 10);
foo (ar_gid, st_gid, 10);
foo (ar_mode, st_mode, 8);
foo (ar_size, st_size, 10);
#undef foo
return 0;
}
static boolean
rs6000coff_write_armap (arch, elength, map, orl_count, stridx)
bfd *arch;
unsigned int elength;
struct orl *map;
{
bfd_error = invalid_operation;
return false;
}
#endif /* ARCHIVES_PLEASE */
#ifdef COREFILES_PLEASE
#undef coff_core_file_matches_executable_p
#define coff_core_file_matches_executable_p \
rs6000coff_core_file_matches_executable_p
#undef coff_get_section_contents
#define coff_get_section_contents rs6000coff_get_section_contents
/* AOUTHDR is defined by the above. We need another defn of it, from the
system include files. Punt the old one and get us a new name for the
typedef in the system include files. */
#ifdef AOUTHDR
#undef AOUTHDR
#endif
#define AOUTHDR second_AOUTHDR
#undef SCNHDR
/* ------------------------------------------------------------------------ */
/* Support for core file stuff.. */
/* ------------------------------------------------------------------------ */
#include <sys/user.h>
#include <sys/ldr.h>
#include <sys/core.h>
/* Number of special purpose registers supported by gdb. This value
should match `tm.h' in gdb directory. Clean this mess up and use
the macros in sys/reg.h. FIXMEmgo. */
#define NUM_OF_SPEC_REGS 7
#define STACK_END_ADDR 0x2ff80000
#define core_hdr(bfd) (((Rs6kCorData*)(bfd->tdata))->hdr)
#define core_datasec(bfd) (((Rs6kCorData*)(bfd->tdata))->data_section)
#define core_stacksec(bfd) (((Rs6kCorData*)(bfd->tdata))->stack_section)
#define core_regsec(bfd) (((Rs6kCorData*)(bfd->tdata))->reg_section)
#define core_reg2sec(bfd) (((Rs6kCorData*)(bfd->tdata))->reg2_section)
/* These are stored in the bfd's tdata */
typedef struct {
struct core *hdr; /* core file header */
asection *data_section,
*stack_section,
*reg_section, /* section for GPRs and special registers. */
*reg2_section; /* section for FPRs. */
} Rs6kCorData;
/* Decide if a given bfd represents a `core' file or not. There really is no
magic number or anything like, in rs6000coff. */
static bfd_target *
rs6000coff_core_p (abfd)
bfd *abfd;
{
int fd;
struct core_dump coredata;
struct stat statbuf;
char *tmpptr;
/* Use bfd_xxx routines, rather than O/S primitives to read coredata. FIXMEmgo */
fd = open (abfd->filename, O_RDONLY);
fstat (fd, &statbuf);
read (fd, &coredata, sizeof (struct core_dump));
close (fd);
if (coredata.c_tab < (sizeof (coredata.c_u) + (int)&coredata.c_u - (int)&coredata.c_signo) ||
coredata.c_tab >= statbuf.st_size ||
(long)coredata.c_stack <= (long)coredata.c_tab ) {
return NULL;
}
/*
If it looks like core file, then.....
read core file header..... (maybe you've done it above..)
*/
/* maybe you should alloc space for the whole core chunk over here!! FIXMEmgo */
tmpptr = (char*)bfd_zalloc (abfd, sizeof (Rs6kCorData));
set_tdata (abfd, tmpptr);
/* .stack section. */
if ((core_stacksec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection)))
== NULL) {
bfd_error = no_memory;
/* bfd_release (abfd, ???? ) */
return NULL;
}
core_stacksec (abfd)->name = ".stack";
core_stacksec (abfd)->flags = SEC_ALLOC + SEC_LOAD;
core_stacksec (abfd)->size = coredata.c_size;
core_stacksec (abfd)->vma = STACK_END_ADDR - coredata.c_size;
core_stacksec (abfd)->filepos = coredata.c_stack; /*???? */
/* .reg section for GPRs and special registers. */
if ((core_regsec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection)))
== NULL) {
bfd_error = no_memory;
/* bfd_release (abfd, ???? ) */
return NULL;
}
core_regsec (abfd)->name = ".reg";
core_regsec (abfd)->flags = SEC_ALLOC;
core_regsec (abfd)->size = (32 + NUM_OF_SPEC_REGS) * 4;
core_regsec (abfd)->vma = NULL; /* not used?? */
core_regsec (abfd)->filepos =
(char*)&coredata.c_u.u_save - (char*)&coredata;
/* .reg2 section for FPRs (floating point registers). */
if ((core_reg2sec (abfd) = (asection*) bfd_zalloc (abfd, sizeof (asection)))
== NULL) {
bfd_error = no_memory;
/* bfd_release (abfd, ???? ) */
return NULL;
}
core_reg2sec (abfd)->name = ".reg2";
core_reg2sec (abfd)->flags = SEC_ALLOC;
core_reg2sec (abfd)->size = 8 * 32; /* 32 FPRs. */
core_reg2sec (abfd)->vma = NULL; /* not used?? */
core_reg2sec (abfd)->filepos =
(char*)&coredata.c_u.u_save.fpr[0] - (char*)&coredata;
/* set up section chain here. */
abfd->section_count = 3;
abfd->sections = core_stacksec (abfd);
core_stacksec (abfd)->next = core_regsec(abfd);
core_regsec (abfd)->next = core_reg2sec (abfd);
core_reg2sec (abfd)->next = NULL;
return abfd->xvec; /* this is garbage for now. */
}
/* return `true' if given core is from the given executable.. */
static boolean
rs6000coff_core_file_matches_executable_p (core_bfd, exec_bfd)
bfd *core_bfd;
bfd *exec_bfd;
{
FILE *fd;
struct core_dump coredata;
struct ld_info ldinfo;
char pathname [1024];
char *str1, *str2;
/* Use bfd_xxx routines, rather than O/S primitives, do error checking!!
FIXMEmgo */
fd = fopen (core_bfd->filename, "r");
fread (&coredata, sizeof (struct core_dump), 1, fd);
fseek (fd, (long)coredata.c_tab, 0);
fread (&ldinfo, (char*)&ldinfo.ldinfo_filename[0] - (char*)&ldinfo.ldinfo_next,
1, fd);
fscanf (fd, "%s", pathname);
printf ("path: %s\n", pathname);
str1 = strrchr (pathname, '/');
str2 = strrchr (exec_bfd->filename, '/');
/* step over character '/' */
str1 = str1 ? str1+1 : &pathname[0];
str2 = str2 ? str2+1 : exec_bfd->filename;
fclose (fd);
return strcmp (str1, str2);
}
static boolean
rs6000coff_get_section_contents (abfd, section, location, offset, count)
bfd *abfd;
sec_ptr section;
PTR location;
file_ptr offset;
int count;
{
if (count == 0)
return true;
/* Reading a core file's sections will be slightly different. For the
rest of them we can use bfd_generic_get_section_contents () I suppose. */
/* Make sure this routine works for any bfd and any section. FIXMEmgo. */
if (abfd->format == bfd_core && strcmp (section->name, ".reg") == 0) {
struct mstsave mstatus;
int regoffset = (char*)&mstatus.gpr[0] - (char*)&mstatus;
/* Assert that the only way this code will be executed is reading the
whole section. */
if (offset || count != (sizeof(mstatus.gpr) + (4 * NUM_OF_SPEC_REGS)))
printf ("ERROR! in rs6000coff_get_section_contents()\n");
/* for `.reg' section, `filepos' is a pointer to the `mstsave' structure
in the core file. */
/* read GPR's into the location. */
if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1
|| bfd_read(location, sizeof (mstatus.gpr), 1, abfd) != sizeof (mstatus.gpr))
return (false); /* on error */
/* increment location to the beginning of special registers in the section,
reset register offset value to the beginning of first special register
in mstsave structure, and read special registers. */
location = (PTR) ((char*)location + sizeof (mstatus.gpr));
regoffset = (char*)&mstatus.iar - (char*)&mstatus;
if ( bfd_seek(abfd, section->filepos + regoffset, SEEK_SET) == -1
|| bfd_read(location, 4 * NUM_OF_SPEC_REGS, 1, abfd) !=
4 * NUM_OF_SPEC_REGS)
return (false); /* on error */
/* increment location address, and read the special registers.. */
/* FIXMEmgo */
return (true);
}
/* else, use default bfd section content transfer. */
else
return bfd_generic_get_section_contents
(abfd, section, location, offset, count);
}
#endif /* COREFILES_PLEASE */
/* The transfer vector that leads the outside world to all of the above. */
bfd_target rs6000coff_vec =
{
"aixcoff-rs6000", /* name */
bfd_target_coff_flavour,
true, /* data byte order is big */
true, /* header byte order is big */
(HAS_RELOC | EXEC_P | /* object flags */
HAS_LINENO | HAS_DEBUG |
HAS_SYMS | HAS_LOCALS | DYNAMIC | WP_TEXT),
(SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* section flags */
'/', /* ar_pad_char */
15, /* ar_max_namelen??? FIXMEmgo */
3, /* default alignment power */
_do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* data */
_do_getb64, _do_putb64, _do_getb32, _do_putb32, _do_getb16, _do_putb16, /* hdrs */
{_bfd_dummy_target, coff_object_p, /* bfd_check_format */
coff_archive_p, _bfd_dummy_target},
{bfd_false, coff_mkobject, coff_mkarchive, /* bfd_set_format */
bfd_false},
{bfd_false, coff_write_object_contents, /* bfd_write_contents */
_bfd_write_archive_contents, bfd_false},
JUMP_TABLE(coff),
COFF_SWAP_TABLE
};