darling-gdb/bfd/Makefile.in
K. Richard Pixley fde8212edc Fri Dec 6 22:58:48 1991 K. Richard Pixley (rich at rtl.cygnus.com)
* Makefile.in: install using INSTALL_DATA, added standards.text
	  support.

	* configure.in: mark directory as target dependent.  configure
	  nows works in objdir always so make file existence checks
	  against ${srcdir}.

Thu Dec  5 22:46:19 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
	  and mandir now keyed off datadir by default.
1991-12-07 07:01:15 +00:00

350 lines
11 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Makefile template for Configure for the BFD library.
# Copyright (C) 1990, 1991 Free Software Foundation, Inc.
# Written by Cygnus Support.
#
# This file is part of BFD, the Binary File Descriptor library.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
# $Id$
srcdir = .
prefix = /usr/local
bindir = $(prefix)/bin
datadir = $(prefix)/lib
libdir = $(prefix)/lib
mandir = $(datadir)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc
SHELL = /bin/sh
INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
AR = ar
AR_FLAGS = qv
BISON = bison
MAKEINFO = makeinfo
RANLIB = ranlib
INCDIR = $(srcdir)/../include
CSEARCH = -I. -I$(srcdir) -I$(INCDIR)
DEP = mkdep
MINUS_G=-g
SUBDIRS = doc
# Change this (to MINIMIZE=1) to save space in executables.
# Currently, all this does is control the target_vector in targets.c.
MINIMIZE=0
TARGETLIB = libbfd.a
CFLAGS = $(MINUS_G) $(HDEFINES) $(TDEFINES) $(CSEARCH) $(CSWITCHES) # -DINTEL960VERSION
BFD_LIBS = libbfd.o opncls.o bfd.o archive.o targets.o cache.o \
archures.o core.o section.o format.o syms.o reloc.o init.o ctor.o
BFD_MACHINES = cpu-h8300.o cpu-i960.o cpu-sparc.o cpu-m68k.o cpu-m88k.o \
cpu-vax.o cpu-mips.o cpu-a29k.o cpu-i386.o cpu-rs6000.o
BFD_BACKENDS = oasys.o ieee.o srec.o elf.o stab-syms.o\
aout64.o aout32.o demo64.o sunos.o newsos3.o i386aout.o bout.o \
coff-i960.o coff-a29k.o coff-m68k.o coff-i386.o coff-m88k.o \
coff-mips.o coff-rs6000.o coff-h8300.o
OPTIONAL_BACKENDS = trad-core.o
#### host and target dependent Makefile fragments come in here.
###
BFD_H=$(INCDIR)/bfd.h
# C source files that correspond to .o's.
CFILES = libbfd.c opncls.c bfd.c archive.c targets.c cache.c archures.c \
coff-i386.c aout64.c aout32.c sunos.c demo64.c coff-i960.c srec.c \
oasys.c ieee.c coff-m68k.c coff-a29k.c coff-rs6000.c \
format.c section.c core.c syms.c stab-syms.c reloc.c init.c ctor.c \
coff-m88k.c coff-mips.c trad-core.c newsos3.c i386aout.c bout.c elf.c \
cpu-h8300.c cpu-i960.c cpu-sparc.c cpu-m68k.c cpu-m88k.c \
cpu-vax.c cpu-mips.c cpu-a29k.c cpu-i386.c cpu-rs6000.c coff-h8300.c
STAGESTUFF = $(TARGETLIB) $(OFILES)
all: $(TARGETLIB)
$(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)"
info: force
$(MAKE) subdir_do DO=info "DODIRS=$(SUBDIRS)"
install-info: force
$(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
# HDEPFILES comes from the host config; TDEPFILES from the target config.
OFILES = $(BFD_LIBS) $(BFD_BACKENDS) $(BFD_MACHINES) $(HDEPFILES) $(TDEPFILES)
$(TARGETLIB): $(OFILES)
rm -f $(TARGETLIB)
$(AR) $(AR_FLAGS) $(TARGETLIB) $(OFILES)
$(RANLIB) $(TARGETLIB)
# When compiling targets.c, supply the default target info from configure.
targets.o: targets.c
$(CC) $(CFLAGS) -c -DMINIMIZE=$(MINIMIZE) $(TDEFAULTS) $<
subdir_do: force
for i in $(DODIRS); do \
if [ -d $(unsubdir)/$$i ] ; then \
if (cd $(unsubdir)/$$i$(subdir); \
$(MAKE) \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"RANLIB=$(RANLIB)" \
"BISON=$(BISON)" $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
stage1: force
- mkdir stage1
- mv -f $(STAGESTUFF) stage1
$(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
stage2: force
- mkdir stage2
- mv -f $(STAGESTUFF) stage2
$(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
stage3: force
- mkdir stage3
- mv -f $(STAGESTUFF) stage3
$(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
against=stage2
comparison: force
for i in *.o ; do cmp $$i $(against)/$$i || exit 1 ; done
$(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)"
de-stage1: force
- (cd stage1 ; mv -f $(STAGESTUFF) ..)
- rmdir stage1
$(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
de-stage2: force
- (cd stage2 ; mv -f $(STAGESTUFF) ..)
- rmdir stage2
$(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
de-stage3: force
- (cd stage3 ; mv -f $(STAGESTUFF) ..)
- rmdir stage3
$(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
tags etags: TAGS
TAGS: force
etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c
clean:
rm -f *.[oa] *~ core *.E *.p *.ip
$(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)"
clobber realclean: clean
rm -f libbfd.a TAGS
$(MAKE) subdir_do DO=clobber "DODIRS=$(SUBDIRS)"
# Mark everything as depending on config.status, since the timestamp on
# sysdep.h might actually move backwards if we reconfig and relink it
# to a different hosts/h-xxx.h file. This will force a recompile anyway.
RECONFIG = config.status
$(BFD_LIBS): libbfd.h $(BFD_H) $(RECONFIG)
$(BFD_MACHINES): libbfd.h $(BFD_H) $(RECONFIG)
$(BFD_BACKENDS): libbfd.h $(BFD_H) $(RECONFIG)
$(OPTIONAL_BACKENDS): libbfd.h $(BFD_H) $(RECONFIG)
# Get around a Sun Make bug in SunOS 4.1.1 with VPATH
cpu-i386.o:cpu-i386.c
saber:
#suppress 65 on bfd_map_over_sections
#suppress 66 on bfd_map_over_sections
#suppress 67 on bfd_map_over_sections
#suppress 68 on bfd_map_over_sections
#suppress 69 on bfd_map_over_sections
#suppress 70 on bfd_map_over_sections
#suppress 110 in bfd_map_over_sections
#suppress 112 in bfd_map_over_sections
#suppress 530
#suppress 590 in swap_exec_header
#suppress 590 in _bfd_dummy_core_file_matches_executable_p
#suppress 590 in bfd_dont_truncate_arname
#suppress 590 on ignore
#suppress 590 on abfd
#setopt load_flags $(CFLAGS)
#load $(CFILES)
#-----------------------------------------------------------------------------
# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
#
# 'VERSION' file must be present and contain a string of the form "x.y"
#-----------------------------------------------------------------------------
ver960.c: FORCE
rm -f ver960.c
echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
# This target should be invoked before building a new release.
# 'VERSION' file must be present and contain a string of the form "x.y"
#
roll:
@V=`cat VERSION` ; \
MAJ=`sed 's/\..*//' VERSION` ; \
MIN=`sed 's/.*\.//' VERSION` ; \
V=$$MAJ.`expr $$MIN + 1` ; \
rm -f VERSION ; \
echo $$V >VERSION ; \
echo Version $$V
# Dummy target to force execution of dependent targets.
#
force:
install:
$(INSTALL_DATA) libbfd.a $(libdir)/libbfd.a
$(RANLIB) $(libdir)/libbfd.a
$(INSTALL_DATA) $(INCDIR)/bfd.h $(includedir)/bfd.h
$(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)"
# Target to uncomment host-specific lines in this makefile. Such lines must
# have the following string beginning in column 1: #__<hostname>__#
# Original Makefile is backed up as 'Makefile.old'.
#
# Invoke with: make make HOST=xxx
#
make:
-@if test $(HOST)x = x ; then \
echo 'Specify "make make HOST=???"'; \
exit 1; \
fi ; \
grep -s "^#The next line was generated by 'make make'" Makefile; \
if test $$? = 0 ; then \
echo "Makefile has already been processed with 'make make'";\
exit 1; \
fi ; \
mv -f Makefile Makefile.old; \
echo "#The next line was generated by 'make make'" >Makefile ; \
echo "HOST=$(HOST)" >>Makefile ; \
echo >>Makefile ; \
sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
dep: $(CFILES)
mkdep $(CFLAGS) $?
headers:
(cd $(docdir); $(MAKE) protos)
# Rebuild prototypes in bfd.h
cp $(docdir)/bfd.h $(BFD_H)
cp $(docdir)/libbfd.h $(srcdir)/libbfd.h
cp $(docdir)/libcoff.h $(srcdir)/libcoff.h
bfd.info:
( cd $(docdir); $(MAKE) bfd.info)
bfd.dvi:
(cd $(docdir); $(MAKE) bfd.dvi)
bfd.ps:
(cd $(docdir); $(MAKE) bfd.ps)
# What appears below is generated by a hacked mkdep using gcc -MM.
# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
libbfd.o : libbfd.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
opncls.o : opncls.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
bfd.o : bfd.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
archive.o : archive.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/aout/ar.h $(INCDIR)/aout/ranlib.h
targets.o : targets.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
cache.o : cache.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
archures.o : archures.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h
aout64.o : aout64.c
aout32.o : aout32.c aoutx.h $(INCDIR)/bfd.h $(INCDIR)/ansidecl.h \
$(INCDIR)/obstack.h libaout.h libbfd.h $(INCDIR)/aout/aout64.h \
$(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def $(INCDIR)/aout/ar.h
sunos.o : sunos.c aoutf1.h $(INCDIR)/bfd.h $(INCDIR)/obstack.h \
libaout.h libbfd.h $(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h \
$(INCDIR)/aout/stab.def $(INCDIR)/aout/ar.h
demo64.o : demo64.c
srec.o : srec.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h
oasys.o : oasys.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/oasys.h liboasys.h
ieee.o : ieee.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/ieee.h libieee.h
coff-h8300.o: coff-h8300.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/coff/h8300.h $(INCDIR)/coff/internal.h libcoff.h coffcode.h
format.o : format.c $(INCDIR)/bfd.h \
$(INCDIR)/obstack.h libbfd.h
section.o : section.c $(INCDIR)/bfd.h \
$(INCDIR)/obstack.h libbfd.h
core.o : core.c $(INCDIR)/bfd.h \
$(INCDIR)/obstack.h libbfd.h
syms.o : syms.c $(INCDIR)/bfd.h \
$(INCDIR)/obstack.h libbfd.h
syms.o : stab-syms.c
reloc.o : reloc.c $(INCDIR)/bfd.h \
$(INCDIR)/obstack.h libbfd.h
trad-core.o : trad-core.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h \
libbfd.h libaout.h
newsos3.o : newsos3.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \
$(INCDIR)/aout/ar.h libaout.h
i386aout.o : i386aout.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def \
$(INCDIR)/aout/ar.h libaout.h
bout.o : bout.c $(INCDIR)/bfd.h $(INCDIR)/obstack.h libbfd.h \
$(INCDIR)/bout.h $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def libaout.h
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY