darling-gdb/Makefile.tpl
Nathanael Nerode f03b47896d 2002-09-29 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.tpl: Make more autoconf-friendly.
	* Makefile.in: Regenerate.
	* configure: Make substitution more autoconf-like.

2002-09-28  Richard Earnshaw  <rearnsha@arm.com>

	* configure.in (arm-*-coff, strongarm-*-coff, xscale-*-coff): Use a
	single entry to handle all these.
	(arm-*-elf, strongarm-*-elf, xscale-*-elf): Likewise.  Also enable
	libjava on arm-*-elf.
2002-09-29 15:59:34 +00:00

1799 lines
58 KiB
Smarty

[+ AutoGen5 template
in
+]
# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'.
#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
# 1999, 2000, 2001, 2002 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Tell GNU make 3.79 not to run the top level in parallel. This
# prevents contention for $builddir/$target/config.cache, as well
# as minimizing scatter in file system caches.
NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
srcdir = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
infodir = @infodir@
mandir = @mandir@
gxx_include_dir=@gxx_include_dir@
tooldir = @tooldir@
build_tooldir = @build_tooldir@
program_transform_name = @program_transform_name@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
# Directory in which the compiler finds executables, libraries, etc.
libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
GDB_NLM_DEPS =
SHELL = @config_shell@
# pwd command to use. Allow user to override default by setting PWDCMD in
# the environment to account for automounters. The make variable must not
# be called PWDCMD, otherwise the value set here is passed to make
# subprocesses and overrides the setting from the user's environment.
PWD = $${PWDCMD-pwd}
# INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
# cygwin host.
INSTALL_PROGRAM_ARGS =
INSTALL = $(SHELL) $$s/install-sh -c
INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
INSTALL_SCRIPT = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_DOSREL = install-dosrel-fake
AS = as
AR = ar
AR_FLAGS = rc
CC = cc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
BUILD_PREFIX =
BUILD_PREFIX_1 = loser-
# These flag values are normally overridden by the configure script.
CFLAGS = -g
CXXFLAGS = -g -O2
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
CFLAGS_FOR_BUILD = $(CFLAGS)
# During gcc bootstrap, if we use some random cc for stage1 then
# CFLAGS will be just -g. We want to ensure that TARGET libraries
# (which we know are built with gcc) are built with optimizations so
# prepend -O2 when setting CFLAGS_FOR_TARGET.
CFLAGS_FOR_TARGET = -O2 $(CFLAGS)
LDFLAGS_FOR_TARGET =
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
PICFLAG =
PICFLAG_FOR_TARGET =
CXX = c++
# Use -O2 to stress test the compiler.
LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
DLLTOOL = dlltool
WINDRES = windres
NM = nm
LD = ld
BZIPPROG = bzip2
MD5PROG = md5sum
# These values are substituted by configure.
DEFAULT_YACC = @DEFAULT_YACC@
DEFAULT_LEX = @DEFAULT_LEX@
DEFAULT_M4 = @DEFAULT_M4@
BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
else \
echo bison ; \
fi`
YACC = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -y -L $$s/bison/ ; \
elif [ -f $$r/byacc/byacc ] ; then \
echo $$r/byacc/byacc ; \
else \
echo ${DEFAULT_YACC} ; \
fi`
LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo ${DEFAULT_LEX} ; fi`
M4 = `if [ -f $$r/m4/m4 ] ; \
then echo $$r/m4/m4 ; \
else echo ${DEFAULT_M4} ; fi`
# For an installed makeinfo, we require it to be from texinfo 4 or
# higher, else we use the "missing" dummy.
MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else if (makeinfo --version \
| egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
then echo makeinfo; else echo $$s/missing makeinfo; fi; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
MAKEINFOFLAGS =
EXPECT = `if [ -f $$r/expect/expect ] ; \
then echo $$r/expect/expect ; \
else echo expect ; fi`
RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
then echo $$s/dejagnu/runtest ; \
else echo runtest ; fi`
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
CXX_FOR_BUILD = $(CXX)
SUBDIRS = @configdirs@
# This is set by the configure script to the list of directories which
# should be built using the target tools.
TARGET_CONFIGDIRS = @target_configdirs@
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
TARGET_SUBDIR = @target_subdir@
BUILD_CONFIGDIRS = libiberty
BUILD_SUBDIR = @build_subdir@
# This is set by the configure script to the arguments to use when configuring
# directories built for the target.
TARGET_CONFIGARGS = @target_configargs@
# This is set by the configure script to the arguments to use when configuring
# directories built for the build system.
BUILD_CONFIGARGS = @build_configargs@
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
SET_LIB_PATH =
# This is the name of the environment variable used for the path to
# the libraries. This may be changed by configure.in.
RPATH_ENVVAR = LD_LIBRARY_PATH
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
HOST_LIB_PATH = $$r/bfd:$$r/opcodes
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
# leading and trailing colons.
REALLY_SET_LIB_PATH = \
$(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
ALL = all.normal
INSTALL_TARGET = installdirs \
install-gcc \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
INSTALL_TARGET_CROSS = installdirs \
install-gcc-cross \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
$(INSTALL_DOSREL)
# Should be substed by configure.in
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
CC_FOR_TARGET = @CC_FOR_TARGET@
CXX_FOR_TARGET = @CXX_FOR_TARGET@
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = @CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@
GCJ_FOR_TARGET = @GCJ_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=as ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
fi; \
fi`
LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=ld ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(LD); \
else \
t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
fi; \
fi`
DLLTOOL_FOR_TARGET = ` \
if [ -f $$r/binutils/dlltool ] ; then \
echo $$r/binutils/dlltool ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(DLLTOOL); \
else \
t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
fi; \
fi`
WINDRES_FOR_TARGET = ` \
if [ -f $$r/binutils/windres ] ; then \
echo $$r/binutils/windres ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(WINDRES); \
else \
t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
fi; \
fi`
AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
fi; \
fi`
RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
if [ x'$(RANLIB)' != x ]; then \
echo $(RANLIB); \
else \
echo ranlib; \
fi; \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
elif [ -f $$r/gcc/xgcc ]; then \
$(CC_FOR_TARGET) -print-prog-name=nm ; \
else \
if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
fi; \
fi`
# The first rule in the file had better be this one. Don't put any above it.
# This lives here to allow makefile fragments to contain dependencies.
all: all.normal
.PHONY: all
# These can be overridden by config/mt-*.
# The _TARGET_ is because they're specified in mt-foo.
# The _HOST_ is because they're programs that run on the host.
EXTRA_TARGET_HOST_ALL_MODULES =
EXTRA_TARGET_HOST_INSTALL_MODULES =
EXTRA_TARGET_HOST_CHECK_MODULES =
#### host and target specific makefile fragments come in here.
###
# Flags to pass down to all sub-makes.
# Please keep these in alphabetical order.
BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LD_FOR_TARGET=$(LD_FOR_TARGET)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"LIBCXXFLAGS=$(LIBCXXFLAGS)" \
"LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"M4=$(M4)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"RPATH_ENVVAR=$(RPATH_ENVVAR)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"TARGET_SUBDIR=$(TARGET_SUBDIR)" \
"WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
"YACC=$(YACC)" \
"bindir=$(bindir)" \
"datadir=$(datadir)" \
"exec_prefix=$(exec_prefix)" \
"includedir=$(includedir)" \
"infodir=$(infodir)" \
"libdir=$(libdir)" \
"libexecdir=$(libexecdir)" \
"lispdir=$(lispdir)" \
"libstdcxx_incdir=$(libstdcxx_incdir)" \
"libsubdir=$(libsubdir)" \
"localstatedir=$(localstatedir)" \
"mandir=$(mandir)" \
"oldincludedir=$(oldincludedir)" \
"prefix=$(prefix)" \
"sbindir=$(sbindir)" \
"sharedstatedir=$(sharedstatedir)" \
"sysconfdir=$(sysconfdir)" \
"tooldir=$(tooldir)" \
"build_tooldir=$(build_tooldir)" \
"gxx_include_dir=$(gxx_include_dir)" \
"gcc_version=$(gcc_version)" \
"gcc_version_trigger=$(gcc_version_trigger)" \
"target_alias=$(target_alias)"
# For any flags above that may contain shell code that varies from one
# target library to another. When doing recursive invocations of the
# top-level Makefile, we don't want the outer make to evaluate them,
# so we pass these variables down unchanged. They must not contain
# single nor double quotes.
RECURSE_FLAGS = \
CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
# If any variables are added here, they must be added to do-*, below.
EXTRA_HOST_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
"`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags that are concerned with the location of the X11 include files
# and library files
#
# NOTE: until the top-level is getting the values via autoconf, it only
# causes problems to have this top-level Makefile overriding the autoconf-set
# values in child directories. Only variables that don't conflict with
# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
#
X11_FLAGS_TO_PASS = \
'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
# If any variables are added here, they must be added to do-*, below.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'LD=$$(LD_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
# ranlib.
# If any variables are added here, they must be added to do-*, below.
# The HOST_* variables are a special case, which are used for the gcc
# cross-building scheme.
EXTRA_GCC_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'HOST_CC=$(CC_FOR_BUILD)' \
'BUILD_PREFIX=$(BUILD_PREFIX)' \
'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \
'NM=$(NM)' \
"`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# This is a list of the targets for all of the modules which are compiled
# using the build machine's native compiler. Configure edits the second
# macro for build!=host builds.
ALL_BUILD_MODULES_LIST = \
all-build-libiberty
ALL_BUILD_MODULES = @all_build_modules@
# This is a list of the configure targets for all of the modules which
# are compiled using the native tools.
CONFIGURE_BUILD_MODULES = \
configure-build-libiberty
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = [+ FOR host_modules +]\
all-[+module+] [+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
#
# The list is in two parts. The first lists those tools which
# are tested as part of the host's native tool-chain, and not
# tested in a cross configuration.
NATIVE_CHECK_MODULES = \
check-bison \
check-byacc \
check-fastjar \
check-flex \
check-zip
CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check +][+ ELIF no_check_cross +][+ ELSE x +]\
check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_CHECK_MODULES)
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
# We put install-opcodes before install-binutils because the installed
# binutils might be on PATH, and they might need the shared opcodes
# library.
# We put install-tcl before install-itcl because itcl wants to run a
# program on installation which uses the Tcl libraries.
INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELSE no_install +]\
install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
$(EXTRA_TARGET_HOST_INSTALL_MODULES)
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-gdb \
all-expect \
all-guile \
all-tclX \
all-tk \
all-tix
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-gdb \
check-guile \
check-expect \
check-tclX \
check-tk \
check-tix
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-gdb \
install-guile \
install-expect \
install-tclX \
install-tk \
install-tix
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = [+ FOR target_modules +]\
all-target-[+module+] [+ ENDFOR target_modules +]
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = [+ FOR target_modules +]\
configure-target-[+module+] [+ ENDFOR target_modules +]
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = [+ FOR target_modules +][+ IF no_check +][+ ELSE check +]\
check-target-[+module+] [+ ENDIF no_check +][+ ENDFOR target_modules +]
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = [+ FOR target_modules +][+ IF no_install +][+ ELSE install +]\
install-target-[+module+] [+ ENDIF no_install +][+ ENDFOR target_modules +]
# This is a list of the targets for which we can do a clean-{target}.
CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELSE no_clean +]\
clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = [+ FOR target_modules +][+ IF no_clean +][+ ELSE clean +]\
clean-target-[+module+] [+ ENDIF no_clean +][+ ENDFOR target_modules +]
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
clean-gdb \
clean-expect \
clean-guile \
clean-tclX \
clean-tk \
clean-tix
# The target built for a native build.
.PHONY: all.normal
all.normal: \
$(ALL_BUILD_MODULES) \
$(ALL_MODULES) \
$(ALL_X11_MODULES) \
$(ALL_TARGET_MODULES) \
all-gcc
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
# but it may do additional work as well).
# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
# because it is so large that it can easily overflow the command line
# length limit on some systems.
DO_X = \
do-clean \
do-distclean \
do-dvi \
do-info \
do-install-info \
do-installcheck \
do-mostlyclean \
do-maintainer-clean \
do-TAGS
.PHONY: $(DO_X)
$(DO_X):
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
for i in $(SUBDIRS) -dummy-; do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
;; \
esac ; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
done
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
for i in $(TARGET_CONFIGDIRS) -dummy-; do \
if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
done; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
"`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
done
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi install-info
.PHONY: clean distclean mostlyclean maintainer-clean realclean
.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
# Make sure makeinfo is built before we do a `make info'.
do-info: all-texinfo
install-info: do-install-info dir.info
s=`cd $(srcdir); ${PWD}`; export s; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
else true ; fi
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
local-distclean:
-rm -f Makefile config.status config.cache mh-frag mt-frag
-if [ "$(TARGET_SUBDIR)" != "." ]; then \
rm -rf $(TARGET_SUBDIR); \
else true; fi
-rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
-rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
-rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
maintainer-clean: local-distclean
realclean: maintainer-clean
# This rule is used to clean specific modules.
.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
@dir=`echo $@ | sed -e 's/clean-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
else \
true; \
fi
.PHONY: $(CLEAN_TARGET_MODULES)
$(CLEAN_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/clean-target-//'`; \
rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
else \
true; \
fi
clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
clean-target-libgcc:
test ! -d gcc/libgcc || \
(cd gcc/libgcc && find . -type d -print) | \
while read d; do rm -f gcc/$$d/libgcc.a || : ; done
-rm -rf gcc/libgcc
# Check target.
.PHONY: check do-check
check:
$(MAKE) do-check NOTPARALLEL=parallel-ok
do-check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
# Automated reporting of test results.
warning.log: build.log
$(srcdir)/contrib/warn_summary build.log > $@
mail-report.log:
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
mail-report-with-warnings.log: warning.log
if test x'$(BOOT_CFLAGS)' != x''; then \
BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
fi; \
$(srcdir)/contrib/test_summary -t -i warning.log >$@
chmod +x $@
echo If you really want to send e-mail, run ./$@ now
# Installation targets.
.PHONY: install install-cross uninstall source-vault binary-vault vault-install
install: $(INSTALL_TARGET)
install-cross: $(INSTALL_TARGET_CROSS)
uninstall:
@echo "the uninstall target is not supported in this tree"
source-vault:
$(MAKE) -f ./release/Build-A-Release \
host=$(host_alias) source-vault
binary-vault:
$(MAKE) -f ./release/Build-A-Release \
host=$(host_alias) target=$(target_alias)
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
else \
true ; \
fi
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}` ; export r ; \
$(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: \
installdirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
gcc-no-fixedincludes
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
# This rule is used to build the modules which are built with the
# build machine's native compiler.
.PHONY: $(ALL_BUILD_MODULES)
$(ALL_BUILD_MODULES):
dir=`echo $@ | sed -e 's/all-build-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
(cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \
else \
true; \
fi
# This rule is used to configure the modules which are built with the
# native tools.
.PHONY: $(CONFIGURE_BUILD_MODULES)
$(CONFIGURE_BUILD_MODULES):
@dir=`echo $@ | sed -e 's/configure-build-//'`; \
if [ ! -d $(BUILD_SUBDIR) ]; then \
true; \
elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \
true; \
elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
if [ -d $(srcdir)/$${dir} ]; then \
[ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
AR="$(AR_FOR_BUILD)"; export AR; \
AS="$(AS_FOR_BUILD)"; export AS; \
CC="$(CC_FOR_BUILD)"; export CC; \
CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \
CXX="$(CXX_FOR_BUILD)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \
LD="$(LD_FOR_BUILD)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \
NM="$(NM_FOR_BUILD)"; export NM; \
RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \
echo Configuring in $(BUILD_SUBDIR)/$${dir}; \
cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(BUILD_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
esac ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(BUILD_SUBDIR)" != "." ] ; then \
if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
srcdiroption="--srcdir=$${topdir}/$${dir}"; \
libsrcdir="$$s/$${dir}"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
--with-build-subdir="$(BUILD_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
$(BUILD_CONFIGARGS) $${srcdiroption} \
--with-build-subdir="$(BUILD_SUBDIR)"; \
fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
cd ..; rmdir $${dir} || true; \
else \
true; \
fi; \
else \
true; \
fi; \
else \
true; \
fi
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
#
# all-gui, and all-libproc are handled specially because
# they are still experimental, and if they fail to build, that
# shouldn't stop "make all".
.PHONY: $(ALL_MODULES) all-gui all-libproc
$(ALL_MODULES) all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
else \
true; \
fi
# These rules are used to check the modules which use FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make check. Some
# modules are only tested in a native toolchain.
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
@if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi; \
fi
$(CROSS_CHECK_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_MODULES)
$(INSTALL_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to configure the modules which are built with the
# target tools.
.PHONY: $(CONFIGURE_TARGET_MODULES)
$(CONFIGURE_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
r=`${PWD}`; export r; \
$(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
else \
echo "Multilibs changed for $${dir}, reconfiguring"; \
rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
else \
mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
fi; \
fi; \
fi; exit 0 # break command into two pieces
@dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
true; \
elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
if [ -d $(srcdir)/$${dir} ]; then \
[ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
AR="$(AR_FOR_TARGET)"; export AR; \
AS="$(AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
*) \
case "$(TARGET_SUBDIR)" in \
.) topdir="../$(srcdir)" ;; \
*) topdir="../../$(srcdir)" ;; \
esac ;; \
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
else \
exit 1; \
fi; \
else \
true; \
fi; \
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
srcdiroption="--srcdir=$${topdir}/$${dir}"; \
libsrcdir="$$s/$${dir}"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
else \
rm -f no-such-file skip-this-dir; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
$(TARGET_CONFIGARGS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
cd ..; rmdir $${dir} || true; \
else \
true; \
fi; \
else \
true; \
fi; \
else \
true; \
fi
# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/all-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/check-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# This rule is used to install the modules which use
# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-target-//'`; \
if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $(TARGET_SUBDIR)/$${dir}; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_X11_MODULES)
$(ALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make all.
.PHONY: $(CHECK_X11_MODULES)
$(CHECK_X11_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_X11_MODULES)
$(INSTALL_X11_MODULES): installdirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
else \
true; \
fi
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc
all-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
else \
true; \
fi
# Building GCC uses some tools for rebuilding "source" files
# like texinfo, bison/byacc, etc. So we must depend on those.
#
# While building GCC, it may be necessary to run various target
# programs like the assembler, linker, etc. So we depend on
# those too.
#
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
echo "Bootstrapping the compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
case "$@" in \
*bootstrap4-lean ) \
msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3-lean ;; \
*bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
compare=compare3 ;; \
*-lean ) msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare-lean ;; \
* ) msg="Comparing stage2 and stage3 of the compiler"; \
compare=compare ;; \
esac; \
$(SET_LIB_PATH) \
echo "$$msg"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
echo "Building the C and C++ compiler"; \
cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
LANGUAGES="c c++" all
.PHONY: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
fi
.PHONY: check-c++
check-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
$(MAKE) check-target-libstdc++-v3; \
else \
true; \
fi
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
.PHONY: install-gcc-cross
install-gcc-cross:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \
else \
true; \
fi
# EXPERIMENTAL STUFF
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: install-dosrel
install-dosrel: installdirs info
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
install-dosrel-fake:
ALL_GCC = all-gcc
ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
# This is a list of inter-dependencies among modules.
all-ash:
all-autoconf: all-m4 all-texinfo
all-automake: all-m4 all-texinfo
all-bash:
all-bfd: all-libiberty all-intl
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
all-bison: all-texinfo
configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
all-byacc:
all-bzip2:
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-etc:
configure-target-examples: $(ALL_GCC_C)
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-findutils:
all-find:
all-flex: all-libiberty all-bison all-byacc
all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gawk:
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = @GDB_TK@
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
configure-target-gperf: $(ALL_GCC_CXX)
all-target-gperf: all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-gui: all-gdb all-libproc
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-intl:
all-itcl: all-tcl all-tk
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-newlib
all-libgui: all-tcl all-tk all-itcl
all-libiberty:
all-build-libiberty: configure-build-libiberty
configure-target-libffi: $(ALL_GCC_C)
configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
all-target-libjava: all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: all-target-libiberty
all-libtool:
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: all-target-libiberty
all-m4: all-libiberty all-texinfo
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
configure-target-libtermcap: $(ALL_GCC_C)
all-opcodes: all-bfd all-libiberty
all-patch: all-libiberty
all-perl:
all-prms: all-libiberty
configure-target-qthreads: $(ALL_GCC_C)
all-rcs:
all-readline:
all-recode: all-libiberty
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
all-sid: all-tcl all-tk
all-sim: all-libiberty all-bfd all-opcodes all-readline
all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-tk: all-tcl
all-texinfo: all-libiberty
all-textutils:
all-time:
all-tix: all-tcl all-tk
all-wdiff:
configure-target-winsup: $(ALL_GCC_C)
all-target-winsup: all-target-libiberty all-target-libtermcap
all-uudecode: all-libiberty
all-zip:
all-zlib:
configure-target-zlib: $(ALL_GCC_C)
all-fastjar: all-zlib all-libiberty
configure-target-fastjar: configure-target-zlib
all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
install-sid: install-tcl install-tk
# Dependencies of all-target-foo on configure-target-foo.
[+ FOR target_modules +]all-target-[+module+]: configure-target-[+module+]
[+ ENDFOR target_modules +]
### other supporting targets
MAKEDIRS= \
$(DESTDIR)$(prefix) \
$(DESTDIR)$(exec_prefix)
.PHONY: installdirs
installdirs: mkinstalldirs
$(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
$(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
mv -f dir.info.new dir.info ; \
else true ; \
fi
dist:
@echo "Building a full distribution of this tree isn't done"
@echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
# Right now this just builds TAGS in each subdirectory. emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does). We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS
# Rebuilding Makefile.in, using autogen.
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.tpl $(srcdir)/Makefile.def
cd $(srcdir) && autogen Makefile.def
# with the gnu make, this is done automatically.
Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
$(SHELL) ./config.status
#
# Support for building net releases
# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.if config.sub config move-if-change \
mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
mkinstalldirs ltconfig ltmain.sh missing ylwrap \
libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
make-stds.texi standards.info* configure.texi configure.info* \
configbuild.* configdev.*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
elif test -f $(TOOL)/version.in; then \
head -1 $(TOOL)/version.in; \
elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
else \
echo VERSION; \
fi`
PACKAGE = $(TOOL)
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-tar
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-md5sum \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-djunpack \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: gdb-taz
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in gdb-tar \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
$(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
.PHONY: do-proto-toplev
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
echo "==> Making $(PACKAGE)-$(VER)/"
# Take out texinfo from a few places.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
./configure sun4
[ -z "$(CONFIGURE_TARGET_MODULES)" ] \
|| $(MAKE) $(CONFIGURE_TARGET_MODULES) \
ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
# Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
if [ ! -f $$d/Makefile ] ; then true ; \
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
elif grep '^info:' $$d/Makefile >/dev/null ; then \
(cd $$d ; $(MAKE) info ) || exit 1 ; \
fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
cd etc && $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
done)
#
# Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
if test -r texinfo/util/tex3patch ; then \
mkdir proto-toplev/texinfo/util && \
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
# Create .gmo files from .po files.
for f in `find . -name '*.po' -type f -print`; do \
msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
done
#
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
.PHONY: do-tar
do-tar:
echo "==> Making $(PACKAGE)-$(VER).tar"
-rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
.PHONY: do-bz2
do-bz2:
echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
-rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
do-md5sum:
echo "==> Adding md5 checksum to top-level directory"
cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
| xargs $(MD5PROG) > ../md5.sum
mv md5.sum proto-toplev
.PHONY: do-djunpack
do-djunpack:
echo "==> Adding updated djunpack.bat to top-level directory"
echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
sed < djunpack.bat > djunpack.new \
-e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
mv djunpack.new djunpack.bat
-rm -f proto-toplev/djunpack.bat
ln -s ../djunpack.bat proto-toplev/djunpack.bat
TEXINFO_SUPPORT= texinfo/texinfo.tex
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.bz2
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.bz2
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
.PHONY: gas+binutils.tar.bz2
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.bz2
GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: gdb.tar
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar.bz2
GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: gdb+dejagnu.tar
gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight.tar
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar
insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
# taz configures for the sun4 target which won't configure newlib.
# We need newlib configured so that the .info files are made.
# Unfortunately, it is not enough to just configure newlib separately:
# taz will build the .info files but since SUBDIRS won't contain newlib,
# distclean won't be run (leaving Makefile, config.status, and the tmp files
# used in building the .info files, eg: *.def, *.ref).
# The problem isn't solvable however without a lot of extra work because
# target libraries are built in subdir $(target_alias) which gets nuked during
# the make distclean. For now punt on the issue of shipping newlib info files
# with newlib net releases and wait for a day when some native target (sun4?)
# supports newlib (if only minimally).
newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
$(MAKE) -f Makefile.in taz TOOL=newlib \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=
# end of Makefile.in