mirror of
https://github.com/darlinghq/darling-gdb.git
synced 2024-12-12 14:37:43 +00:00
d8afcce964
* (unwind_command): Clean it up and make it print things out nicer. * monitor.c: Add ^C handling capability (mostly ripped off from remote.c). * (monitor_printf): Make it check the command echo. * (monitor_printf_noecho): Similar to above, but doesn't check for echo. * (monitor_stop): No longer waits for prompt. That is the job of the caller. This makes things work much better for monitor_wait, which waits for the prompt itself. * (monitor_open): Deal with new monitor_stop semantics. Also, flush input after sending init strings to get rid of junk that may be output. Also, don't always send \r to remote. Use monitor_ops->line_term cuz proper character isn't always \r. * (monitor_fetch_register): Switch to completely different algorithm to deal with lame-ass monitors which put spaces in the middle of numbers, and prompt with a space!!!!! * (monitor_read_memory_single): New routine to be used with monitors that can only return one byte/short/long at a time. This is selected via MO_GETMEM_READ_SINGLE. * (monitor_load_srec): Use monitor_printf_noecho for sending S records. Most targets don't echo them. * (monitor.h): Get rid of cmd_delim. Add line_delim. * op50n-rom.c (op50n_cmds): Fill it up. Make it work. * w89k-rom.c: Change all eols from \r to \n. Change load_resp to ^Q to prevent error message. * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special instruction sequence at end to make restore_pc_queue happy.
177 lines
7.6 KiB
C
177 lines
7.6 KiB
C
/* Remote debugging interface ROM monitors.
|
|
* Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
|
|
* Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
|
|
*
|
|
* Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
|
|
* Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
|
|
*
|
|
* This file is part of GDB.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include "serial.h"
|
|
|
|
struct rom_cmd_data {
|
|
char *cmd; /* command to send */
|
|
char *delim; /* the delimiter */
|
|
char *result; /* the result */
|
|
};
|
|
|
|
/* This structure describes the strings necessary to give small command
|
|
sequences to the monitor, and parse the response.
|
|
|
|
CMD is the actual command typed at the monitor. Usually this has embedded
|
|
sequences ala printf, which are substituted with the arguments appropriate
|
|
to that type of command. Ie: to examine a register, we substitute the
|
|
register name for the first arg. To modify memory, we substitute the memory
|
|
location and the new contents for the first and second args, etc...
|
|
|
|
RESP_DELIM used to home in on the response string, and is used to
|
|
disambiguate the answer within the pile of text returned by the monitor.
|
|
This should be a unique string that immediately precedes the answer. Ie: if
|
|
your monitor prints out `PC: 00000001= ' in response to asking for the PC,
|
|
you should use `: ' as the RESP_DELIM. RESP_DELIM may be NULL if the res-
|
|
ponse is going to be ignored, or has no particular leading text.
|
|
|
|
TERM is the string that the monitor outputs to indicate that it is idle, and
|
|
waiting for input. This is usually a prompt of some sort. In the previous
|
|
example, it would be `= '. It is important that TERM really means that the
|
|
monitor is idle, otherwise GDB may try to type at it when it isn't ready for
|
|
input. This is a problem because many monitors cannot deal with type-ahead.
|
|
TERM may be NULL if the normal prompt is output.
|
|
|
|
TERM_CMD is used to quit out of the subcommand mode and get back to the main
|
|
prompt. TERM_CMD may be NULL if it isn't necessary. It will also be
|
|
ignored if TERM is NULL.
|
|
*/
|
|
|
|
struct memrw_cmd
|
|
{
|
|
char *cmdb; /* Command to send for byte read/write */
|
|
char *cmdw; /* Command for word (16 bit) read/write */
|
|
char *cmdl; /* Command for long (32 bit) read/write */
|
|
char *cmdll; /* Command for long long (64 bit) read/write */
|
|
char *resp_delim; /* String just prior to the desired value */
|
|
char *term; /* Terminating string to search for */
|
|
char *term_cmd; /* String to get out of sub-mode (if necessary) */
|
|
};
|
|
|
|
struct regrw_cmd
|
|
{
|
|
char *cmd; /* Command to send for reg read/write */
|
|
char *resp_delim; /* String just prior to the desired value */
|
|
char *term; /* Terminating string to search for */
|
|
char *term_cmd; /* String to get out of sub-mode (if necessary) */
|
|
};
|
|
|
|
struct monitor_ops
|
|
{
|
|
int flags; /* See below */
|
|
char **init; /* List of init commands. NULL terminated. */
|
|
char *cont; /* continue command */
|
|
char *step; /* single step */
|
|
char *stop; /* Interrupt program string */
|
|
char *set_break; /* set a breakpoint */
|
|
char *clr_break; /* clear a breakpoint */
|
|
char *clr_all_break; /* Clear all breakpoints */
|
|
char *fill; /* Memory fill cmd (addr len val) */
|
|
struct memrw_cmd setmem; /* set memory to a value */
|
|
struct memrw_cmd getmem; /* display memory */
|
|
struct regrw_cmd setreg; /* set a register */
|
|
struct regrw_cmd getreg; /* get a register */
|
|
/* Some commands can dump a bunch of registers
|
|
at once. This comes as a set of REG=VAL
|
|
pairs. This should be called for each pair
|
|
of registers that we can parse to supply
|
|
GDB with the value of a register. */
|
|
char *dump_registers; /* Command to dump all regs at once */
|
|
char *register_pattern; /* Pattern that picks out register from reg dump */
|
|
void (*supply_register) PARAMS ((char *name, int namelen, char *val, int vallen));
|
|
void (*load_routine) PARAMS ((serial_t desc, char *file, int hashmark)); /* Download routine */
|
|
char *load; /* load command */
|
|
char *loadresp; /* Response to load command */
|
|
char *prompt; /* monitor command prompt */
|
|
char *line_term; /* end-of-command delimitor */
|
|
char *cmd_end; /* optional command terminator */
|
|
struct target_ops *target; /* target operations */
|
|
int stopbits; /* number of stop bits */
|
|
char **regnames; /* array of register names in ascii */
|
|
int magic; /* Check value */
|
|
};
|
|
|
|
#define MONITOR_OPS_MAGIC 600925
|
|
|
|
/* Flag defintions */
|
|
|
|
#define MO_CLR_BREAK_USES_ADDR 0x1 /* If set, then clear breakpoint command
|
|
uses address, otherwise it uses an index
|
|
returned by the monitor. */
|
|
#define MO_FILL_USES_ADDR 0x2 /* If set, then memory fill command uses
|
|
STARTADDR, ENDADDR+1, VALUE as args, else it
|
|
uses STARTADDR, LENGTH, VALUE as args. */
|
|
#define MO_NEED_REGDUMP_AFTER_CONT 0x4 /* If set, then monitor doesn't auto-
|
|
matically supply register dump when
|
|
coming back after a continue. */
|
|
#define MO_GETMEM_NEEDS_RANGE 0x8 /* getmem needs start addr and end addr */
|
|
#define MO_GETMEM_READ_SINGLE 0x10 /* getmem can only read one loc at a time */
|
|
|
|
extern struct monitor_ops *current_monitor;
|
|
|
|
#define LOADTYPES (current_monitor->loadtypes)
|
|
#define LOADPROTOS (current_monitor->loadprotos)
|
|
#define INIT_CMD (current_monitor->init)
|
|
#define CONT_CMD (current_monitor->cont)
|
|
#define STEP_CMD (current_monitor->step)
|
|
#define SET_BREAK_CMD (current_monitor->set_break)
|
|
#define CLR_BREAK_CMD (current_monitor->clr_break)
|
|
#define SET_MEM (current_monitor->setmem)
|
|
#define GET_MEM (current_monitor->getmem)
|
|
#define LOAD_CMD (current_monitor->load)
|
|
#define GET_REG (current_monitor->regget)
|
|
#define SET_REG (current_monitor->regset)
|
|
#define CMD_END (current_monitor->cmd_end)
|
|
#define CMD_DELIM (current_monitor->cmd_delim)
|
|
#define PROMPT (current_monitor->prompt)
|
|
#define TARGET_OPS (current_monitor->target)
|
|
#define TARGET_NAME (current_monitor->target->to_shortname)
|
|
#define BAUDRATES (current_monitor->baudrates)
|
|
#define STOPBITS (current_monitor->stopbits)
|
|
#define REGNAMES(x) (current_monitor->regnames[x])
|
|
#define ROMCMD(x) (x.cmd)
|
|
#define ROMDELIM(x) (x.delim)
|
|
#define ROMRES(x) (x.result)
|
|
|
|
#define push_monitor(x) current_monitor = x;
|
|
|
|
#define SREC_SIZE 160
|
|
|
|
/*
|
|
* FIXME: These are to temporarily maintain compatability with the
|
|
* old monitor structure till remote-mon.c is fixed to work
|
|
* like the *-rom.c files.
|
|
*/
|
|
#define MEM_PROMPT (current_monitor->loadtypes)
|
|
#define MEM_SET_CMD (current_monitor->setmem)
|
|
#define MEM_DIS_CMD (current_monitor->getmem)
|
|
#define REG_DELIM (current_monitor->regset.delim)
|
|
|
|
extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, int from_tty));
|
|
extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
|
|
extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
|
|
extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
|
|
extern void monitor_printf ();
|
|
extern void init_monitor_ops PARAMS ((struct target_ops *));
|