darling-gdb/gdb/inflow.c

/* Low level interface to ptrace, for GDB when running under Unix.
   Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "command.h"
#include "signals.h"
#include "serial.h"
#include "target.h"

#ifdef USG
#include <sys/types.h>
#endif

/* Some USG-esque systems (some of which are BSD-esque enough so that USG
   is not defined) want this header, and it won't do any harm.  */
#include <fcntl.h>

#include <sys/param.h>
#include <signal.h>

static void
kill_command PARAMS ((char *, int));

static void
terminal_ours_1 PARAMS ((int));

/* Nonzero if we are debugging an attached outside process
   rather than an inferior.  */

int attach_flag;


/* Record terminal status separately for debugger and inferior.  */

static serial_t stdin_serial;

/* TTY state for the inferior.  We save it whenever the inferior stops, and
   restore it when it resumes.  */
static serial_ttystate inferior_ttystate;

/* Our own tty state, which we restore every time we need to deal with the
   terminal.  We only set it once, when GDB first starts.  The settings of
   flags which readline saves and restores and unimportant.  */
static serial_ttystate our_ttystate;

/* fcntl flags for us and the inferior.  Saved and restored just like
   {our,inferior}_ttystate.  */
static int tflags_inferior;
static int tflags_ours;

/* While the inferior is running, we want SIGINT and SIGQUIT to go to the
   inferior only.  If we have job control, that takes care of it.  If not,
   we save our handlers in these two variables and set SIGINT and SIGQUIT
   to SIG_IGN.  */
static void (*sigint_ours) ();
static void (*sigquit_ours) ();

/* The name of the tty (from the `tty' command) that we gave to the inferior
   when it was last started.  */

static char *inferior_thisrun_terminal;

/* Nonzero if our terminal settings are in effect.
   Zero if the inferior's settings are in effect.  */

static int terminal_is_ours;

enum {yes, no, have_not_checked} gdb_has_a_terminal_flag = have_not_checked;

/* Does GDB have a terminal (on stdin)?  */
int
gdb_has_a_terminal ()
{
  switch (gdb_has_a_terminal_flag)
    {
    case yes:
      return 1;
    case no:
      return 0;
    case have_not_checked:
      /* Get all the current tty settings (including whether we have a tty at
	 all!).  Can't do this in _initialize_inflow because SERIAL_FDOPEN
	 won't work until the serial_ops_list is initialized.  */

      tflags_ours = fcntl (0, F_GETFL, 0);

      gdb_has_a_terminal_flag = no;
      stdin_serial = SERIAL_FDOPEN (0);
      if (stdin_serial != NULL)
	{
	  our_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
	  if (our_ttystate != NULL)
	    gdb_has_a_terminal_flag = yes;
	}

      return gdb_has_a_terminal_flag == yes;
    }
}

/* Macro for printing errors from ioctl operations */

#define	OOPSY(what)	\
  if (result == -1)	\
    fprintf(stderr, "[%s failed in terminal_inferior: %s]\n", \
	    what, strerror (errno))

static void terminal_ours_1 PARAMS ((int));

/* Initialize the terminal settings we record for the inferior,
   before we actually run the inferior.  */

void
terminal_init_inferior ()
{
  /* Make sure that our_ttystate (etc) are initialized.  */
  gdb_has_a_terminal ();

  /* We could just as well copy our_ttystate (if we felt like adding
     a new function SERIAL_COPY_TTY_STATE).  */
  if (inferior_ttystate)
    free (inferior_ttystate);
  inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
  SERIAL_SET_PROCESS_GROUP (stdin_serial, inferior_ttystate, inferior_pid);

  /* Make sure that next time we call terminal_inferior (which will be
     before the program runs, as it needs to be), we install the new
     process group.  */
  terminal_is_ours = 1;
}

/* Put the inferior's terminal settings into effect.
   This is preparation for starting or resuming the inferior.  */

void
terminal_inferior ()
{
  if (gdb_has_a_terminal () && terminal_is_ours
      && inferior_thisrun_terminal == 0)
    {
      int result;

      /* Is there a reason this is being done twice?  It happens both
	 places we use F_SETFL, so I'm inclined to think perhaps there
	 is some reason, however perverse.  Perhaps not though...  */
      result = fcntl (0, F_SETFL, tflags_inferior);
      result = fcntl (0, F_SETFL, tflags_inferior);
      OOPSY ("fcntl F_SETFL");

      /* Because we were careful to not change in or out of raw mode in
	 terminal_ours, we will not change in our out of raw mode with
	 this call, so we don't flush any input.  */
      result = SERIAL_SET_TTY_STATE (stdin_serial, inferior_ttystate);

      /* If attach_flag is set, we don't know whether we are sharing a
	 terminal with the inferior or not.  (attaching a process
	 without a terminal is one case where we do not; attaching a
	 process which we ran from the same shell as GDB via `&' is
	 one case where we do, I think (but perhaps this is not
	 `sharing' in the sense that we need to save and restore tty
	 state)).  I don't know if there is any way to tell whether we
	 are sharing a terminal.  So what we do is to go through all
	 the saving and restoring of terminal state, but ignore errors
	 (which will occur, in tcsetpgrp, if we are not sharing a
	 terminal).  */

      if (!attach_flag)
	OOPSY ("setting tty state");

      if (!job_control)
	{
	  sigint_ours = (void (*) ()) signal (SIGINT, SIG_IGN);
	  sigquit_ours = (void (*) ()) signal (SIGQUIT, SIG_IGN);
	}
    }
  terminal_is_ours = 0;
}

/* Put some of our terminal settings into effect,
   enough to get proper results from our output,
   but do not change into or out of RAW mode
   so that no input is discarded.

   After doing this, either terminal_ours or terminal_inferior
   should be called to get back to a normal state of affairs.  */

void
terminal_ours_for_output ()
{
  terminal_ours_1 (1);
}

/* Put our terminal settings into effect.
   First record the inferior's terminal settings
   so they can be restored properly later.  */

void
terminal_ours ()
{
  terminal_ours_1 (0);
}

/* output_only is not used, and should not be used unless we introduce
   separate terminal_is_ours and terminal_is_ours_for_output
   flags.  */

static void
terminal_ours_1 (output_only)
     int output_only;
{
  /* Checking inferior_thisrun_terminal is necessary so that
     if GDB is running in the background, it won't block trying
     to do the ioctl()'s below.  Checking gdb_has_a_terminal
     avoids attempting all the ioctl's when running in batch.  */
  if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0)
    return;

  if (!terminal_is_ours)
    {
      /* Ignore this signal since it will happen when we try to set the
	 pgrp.  */
      void (*osigttou) ();
      int result;

      terminal_is_ours = 1;

#ifdef SIGTTOU
      if (job_control)
	osigttou = (void (*) ()) signal (SIGTTOU, SIG_IGN);
#endif

      if (inferior_ttystate)
	free (inferior_ttystate);
      inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);

      /* Here we used to set ICANON in our ttystate, but I believe this
	 was an artifact from before when we used readline.  Readline sets
	 the tty state when it needs to.  */

      /* Set tty state to our_ttystate.  We don't change in our out of raw
	 mode, to avoid flushing input.  We need to do the same thing
	 regardless of output_only, because we don't have separate
	 terminal_is_ours and terminal_is_ours_for_output flags.  It's OK,
	 though, since readline will deal with raw mode when/if it needs to.
	 */
      SERIAL_NOFLUSH_SET_TTY_STATE (stdin_serial, our_ttystate,
				    inferior_ttystate);

#ifdef SIGTTOU
      if (job_control)
	signal (SIGTTOU, osigttou);
#endif

      if (!job_control)
	{
	  signal (SIGINT, sigint_ours);
	  signal (SIGQUIT, sigquit_ours);
	}

      tflags_inferior = fcntl (0, F_GETFL, 0);

      /* Is there a reason this is being done twice?  It happens both
	 places we use F_SETFL, so I'm inclined to think perhaps there
	 is some reason, however perverse.  Perhaps not though...  */
      result = fcntl (0, F_SETFL, tflags_ours);
      result = fcntl (0, F_SETFL, tflags_ours);

      result = result;	/* lint */
    }
}

/* ARGSUSED */
void
term_info (arg, from_tty)
     char *arg;
     int from_tty;
{
  target_terminal_info (arg, from_tty);
}

/* ARGSUSED */
void
child_terminal_info (args, from_tty)
     char *args;
     int from_tty;
{
  if (!gdb_has_a_terminal ())
    {
      printf_filtered ("This GDB does not control a terminal.\n");
      return;
    }

  printf_filtered ("Inferior's terminal status (currently saved by GDB):\n");

  /* First the fcntl flags.  */
  {
    int flags;
    
    flags = tflags_inferior;

    printf_filtered ("File descriptor flags = ");

#ifndef O_ACCMODE
#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
#endif
    /* (O_ACCMODE) parens are to avoid Ultrix header file bug */
    switch (flags & (O_ACCMODE))
      {
      case O_RDONLY: printf_filtered ("O_RDONLY"); break;
      case O_WRONLY: printf_filtered ("O_WRONLY"); break;
      case O_RDWR: printf_filtered ("O_RDWR"); break;
      }
    flags &= ~(O_ACCMODE);

#ifdef O_NONBLOCK
    if (flags & O_NONBLOCK) 
      printf_filtered (" | O_NONBLOCK");
    flags &= ~O_NONBLOCK;
#endif
    
#if defined (O_NDELAY)
    /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will
       print it as O_NONBLOCK, which is good cause that is what POSIX
       has, and the flag will already be cleared by the time we get here.  */
    if (flags & O_NDELAY)
      printf_filtered (" | O_NDELAY");
    flags &= ~O_NDELAY;
#endif

    if (flags & O_APPEND)
      printf_filtered (" | O_APPEND");
    flags &= ~O_APPEND;

#if defined (O_BINARY)
    if (flags & O_BINARY)
      printf_filtered (" | O_BINARY");
    flags &= ~O_BINARY;
#endif

    if (flags)
      printf_filtered (" | 0x%x", flags);
    printf_filtered ("\n");
  }

  SERIAL_PRINT_TTY_STATE (stdin_serial, inferior_ttystate);
}

/* NEW_TTY_PREFORK is called before forking a new child process,
   so we can record the state of ttys in the child to be formed.
   TTYNAME is null if we are to share the terminal with gdb;
   or points to a string containing the name of the desired tty.

   NEW_TTY is called in new child processes under Unix, which will
   become debugger target processes.  This actually switches to
   the terminal specified in the NEW_TTY_PREFORK call.  */

void
new_tty_prefork (ttyname)
     char *ttyname;
{
  /* Save the name for later, for determining whether we and the child
     are sharing a tty.  */
  inferior_thisrun_terminal = ttyname;
}

void
new_tty ()
{
  register int tty;
  void (*osigttou) ();

  if (inferior_thisrun_terminal == 0)
    return;
#if !defined(__GO32__)
#ifdef TIOCNOTTY
  /* Disconnect the child process from our controlling terminal.  On some
     systems (SVR4 for example), this may cause a SIGTTOU, so temporarily
     ignore SIGTTOU. */
  tty = open("/dev/tty", O_RDWR);
  if (tty > 0)
    {
      osigttou = (void (*)()) signal(SIGTTOU, SIG_IGN);
      ioctl(tty, TIOCNOTTY, 0);
      close(tty);
      signal(SIGTTOU, osigttou);
    }
#endif

  /* Now open the specified new terminal.  */

#ifdef USE_O_NOCTTY
  tty = open(inferior_thisrun_terminal, O_RDWR | O_NOCTTY);
#else
  tty = open(inferior_thisrun_terminal, O_RDWR);
#endif
  if (tty == -1)
    {
      print_sys_errmsg (inferior_thisrun_terminal, errno);
      _exit(1);
    }

  /* Avoid use of dup2; doesn't exist on all systems.  */
  if (tty != 0)
    { close (0); dup (tty); }
  if (tty != 1)
    { close (1); dup (tty); }
  if (tty != 2)
    { close (2); dup (tty); }
  if (tty > 2)
    close(tty);
#endif /* !go32 */
}

/* Kill the inferior process.  Make us have no inferior.  */

/* ARGSUSED */
static void
kill_command (arg, from_tty)
     char *arg;
     int from_tty;
{
  /* Shouldn't this be target_has_execution?  FIXME.  */
  if (inferior_pid == 0)
    error ("The program is not being run.");
  if (!query ("Kill the program being debugged? "))
    error ("Not confirmed.");
  target_kill ();

  /* Killing off the inferior can leave us with a core file.  If so,
     print the state we are left in.  */
  if (target_has_stack) {
    printf_filtered ("In %s,\n", current_target->to_longname);
    if (selected_frame == NULL)
      fputs_filtered ("No selected stack frame.\n", stdout);
    else
      print_stack_frame (selected_frame, selected_frame_level, 1);
  }
}

/* The inferior process has died.  Long live the inferior!  */

void
generic_mourn_inferior ()
{
  inferior_pid = 0;
  attach_flag = 0;
  mark_breakpoints_out ();
  registers_changed ();

#ifdef CLEAR_DEFERRED_STORES
  /* Delete any pending stores to the inferior... */
  CLEAR_DEFERRED_STORES;
#endif

  reopen_exec_file ();
  if (target_has_stack) {
    set_current_frame ( create_new_frame (read_register (FP_REGNUM),
					  read_pc ()));
    select_frame (get_current_frame (), 0);
  } else {
    set_current_frame (0);
    select_frame ((FRAME) 0, -1);
  }
  /* It is confusing to the user for ignore counts to stick around
     from previous runs of the inferior.  So clear them.  */
  breakpoint_clear_ignore_counts ();
}

/* Call set_sigint_trap when you need to pass a signal on to an attached
   process when handling SIGINT */

/* ARGSUSED */
static void
pass_signal (signo)
    int signo;
{
  kill (inferior_pid, SIGINT);
}

static void (*osig)();

void
set_sigint_trap()
{
  osig = (void (*) ()) signal (SIGINT, pass_signal);
}

void
clear_sigint_trap()
{
  signal (SIGINT, osig);
}

void
_initialize_inflow ()
{
  add_info ("terminal", term_info,
	   "Print inferior's saved terminal status.");

  add_com ("kill", class_run, kill_command,
	   "Kill execution of program being debugged.");

  inferior_pid = 0;

  terminal_is_ours = 1;
}