darling-gdb/gas/config/tc-i960.c
Ken Raeburn 355afbcd8b Ran "indent", for GNU coding style; some code & comments still need fixup.
Removed some unneeded files.

obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
tc-m68k.c (md_assemble): 68000+68881 is okay -- could be emulating.
1992-11-23 20:42:33 +00:00

3215 lines
84 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* tc-i960.c - All the i80960-specific stuff
Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
This file is part of GAS.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* See comment on md_parse_option for 80960-specific invocation options. */
/******************************************************************************
* i80690 NOTE!!!:
* Header, symbol, and relocation info will be used on the host machine
* only -- only executable code is actually downloaded to the i80960.
* Therefore, leave all such information in host byte order.
*
* (That's a slight lie -- we DO download some header information, but
* the downloader converts the file format and corrects the byte-ordering
* of the relevant fields while doing so.)
*
* ==> THIS IS NO LONGER TRUE USING BFD. WE CAN GENERATE ANY BYTE ORDER
* FOR THE HEADER, AND READ ANY BYTE ORDER. PREFERENCE WOULD BE TO
* USE LITTLE-ENDIAN BYTE ORDER THROUGHOUT, REGARDLESS OF HOST. <==
*
***************************************************************************** */
/* There are 4 different lengths of (potentially) symbol-based displacements
* in the 80960 instruction set, each of which could require address fix-ups
* and (in the case of external symbols) emission of relocation directives:
*
* 32-bit (MEMB)
* This is a standard length for the base assembler and requires no
* special action.
*
* 13-bit (COBR)
* This is a non-standard length, but the base assembler has a hook for
* bit field address fixups: the fixS structure can point to a descriptor
* of the field, in which case our md_number_to_field() routine gets called
* to process it.
*
* I made the hook a little cleaner by having fix_new() (in the base
* assembler) return a pointer to the fixS in question. And I made it a
* little simpler by storing the field size (in this case 13) instead of
* of a pointer to another structure: 80960 displacements are ALWAYS
* stored in the low-order bits of a 4-byte word.
*
* Since the target of a COBR cannot be external, no relocation directives
* for this size displacement have to be generated. But the base assembler
* had to be modified to issue error messages if the symbol did turn out
* to be external.
*
* 24-bit (CTRL)
* Fixups are handled as for the 13-bit case (except that 24 is stored
* in the fixS).
*
* The relocation directive generated is the same as that for the 32-bit
* displacement, except that it's PC-relative (the 32-bit displacement
* never is). The i80960 version of the linker needs a mod to
* distinguish and handle the 24-bit case.
*
* 12-bit (MEMA)
* MEMA formats are always promoted to MEMB (32-bit) if the displacement
* is based on a symbol, because it could be relocated at link time.
* The only time we use the 12-bit format is if an absolute value of
* less than 4096 is specified, in which case we need neither a fixup nor
* a relocation directive.
*/
#include <stdio.h>
#include <ctype.h>
#include "as.h"
#include "read.h"
#include "obstack.h"
#include "opcode/i960.h"
extern char *input_line_pointer;
extern struct hash_control *po_hash;
extern char *next_object_file_charP;
#ifdef OBJ_COFF
int md_reloc_size = sizeof (struct reloc);
#else /* OBJ_COFF */
int md_reloc_size = sizeof (struct relocation_info);
#endif /* OBJ_COFF */
/***************************
* Local i80960 routines *
************************** */
static void brcnt_emit (); /* Emit branch-prediction instrumentation code */
static char *brlab_next (); /* Return next branch local label */
void brtab_emit (); /* Emit br-predict instrumentation table */
static void cobr_fmt (); /* Generate COBR instruction */
static void ctrl_fmt (); /* Generate CTRL instruction */
static char *emit (); /* Emit (internally) binary */
static int get_args (); /* Break arguments out of comma-separated list */
static void get_cdisp (); /* Handle COBR or CTRL displacement */
static char *get_ispec (); /* Find index specification string */
static int get_regnum (); /* Translate text to register number */
static int i_scan (); /* Lexical scan of instruction source */
static void mem_fmt (); /* Generate MEMA or MEMB instruction */
static void mema_to_memb (); /* Convert MEMA instruction to MEMB format */
static segT parse_expr (); /* Parse an expression */
static int parse_ldconst (); /* Parse and replace a 'ldconst' pseudo-op */
static void parse_memop (); /* Parse a memory operand */
static void parse_po (); /* Parse machine-dependent pseudo-op */
static void parse_regop (); /* Parse a register operand */
static void reg_fmt (); /* Generate a REG format instruction */
void reloc_callj (); /* Relocate a 'callj' instruction */
static void relax_cobr (); /* "De-optimize" cobr into compare/branch */
static void s_leafproc (); /* Process '.leafproc' pseudo-op */
static void s_sysproc (); /* Process '.sysproc' pseudo-op */
static int shift_ok (); /* Will a 'shlo' substiture for a 'ldconst'? */
static void syntax (); /* Give syntax error */
static int targ_has_sfr (); /* Target chip supports spec-func register? */
static int targ_has_iclass (); /* Target chip supports instruction set? */
/* static void unlink_sym(); *//* Remove a symbol from the symbol list */
/* See md_parse_option() for meanings of these options */
static char norelax; /* True if -norelax switch seen */
static char instrument_branches;/* True if -b switch seen */
/* Characters that always start a comment.
* If the pre-processor is disabled, these aren't very useful.
*/
const char comment_chars[] = "#";
/* Characters that only start a comment at the beginning of
* a line. If the line seems to have the form '# 123 filename'
* .line and .file directives will appear in the pre-processed output.
*
* Note that input_file.c hand checks for '#' at the beginning of the
* first line of the input file. This is because the compiler outputs
* #NO_APP at the beginning of its output.
*/
/* Also note that comments started like this one will always work. */
const char line_comment_chars[] = "";
const char line_separator_chars[] = "";
/* Chars that can be used to separate mant from exp in floating point nums */
const char EXP_CHARS[] = "eE";
/* Chars that mean this number is a floating point constant,
* as in 0f12.456 or 0d1.2345e12
*/
const char FLT_CHARS[] = "fFdDtT";
/* Table used by base assembler to relax addresses based on varying length
* instructions. The fields are:
* 1) most positive reach of this state,
* 2) most negative reach of this state,
* 3) how many bytes this mode will add to the size of the current frag
* 4) which index into the table to try if we can't fit into this one.
*
* For i80960, the only application is the (de-)optimization of cobr
* instructions into separate compare and branch instructions when a 13-bit
* displacement won't hack it.
*/
const relax_typeS
md_relax_table[] =
{
{0, 0, 0, 0}, /* State 0 => no more relaxation possible */
{4088, -4096, 0, 2}, /* State 1: conditional branch (cobr) */
{0x800000 - 8, -0x800000, 4, 0}, /* State 2: compare (reg) & branch (ctrl) */
};
/* These are the machine dependent pseudo-ops.
*
* This table describes all the machine specific pseudo-ops the assembler
* has to support. The fields are:
* pseudo-op name without dot
* function to call to execute this pseudo-op
* integer arg to pass to the function
*/
#define S_LEAFPROC 1
#define S_SYSPROC 2
const pseudo_typeS md_pseudo_table[] =
{
{"bss", s_lcomm, 1},
{"extended", float_cons, 't'},
{"leafproc", parse_po, S_LEAFPROC},
{"sysproc", parse_po, S_SYSPROC},
{"word", cons, 4},
{"quad", big_cons, 16},
{0, 0, 0}
};
/* Macros to extract info from an 'expressionS' structure 'e' */
#define adds(e) e.X_add_symbol
#define subs(e) e.X_subtract_symbol
#define offs(e) e.X_add_number
#define segs(e) e.X_seg
/* Branch-prediction bits for CTRL/COBR format opcodes */
#define BP_MASK 0x00000002 /* Mask for branch-prediction bit */
#define BP_TAKEN 0x00000000 /* Value to OR in to predict branch */
#define BP_NOT_TAKEN 0x00000002 /* Value to OR in to predict no branch */
/* Some instruction opcodes that we need explicitly */
#define BE 0x12000000
#define BG 0x11000000
#define BGE 0x13000000
#define BL 0x14000000
#define BLE 0x16000000
#define BNE 0x15000000
#define BNO 0x10000000
#define BO 0x17000000
#define CHKBIT 0x5a002700
#define CMPI 0x5a002080
#define CMPO 0x5a002000
#define B 0x08000000
#define BAL 0x0b000000
#define CALL 0x09000000
#define CALLS 0x66003800
#define RET 0x0a000000
/* These masks are used to build up a set of MEMB mode bits. */
#define A_BIT 0x0400
#define I_BIT 0x0800
#define MEMB_BIT 0x1000
#define D_BIT 0x2000
/* Mask for the only mode bit in a MEMA instruction (if set, abase reg is used) */
#define MEMA_ABASE 0x2000
/* Info from which a MEMA or MEMB format instruction can be generated */
typedef struct
{
long opcode; /* (First) 32 bits of instruction */
int disp; /* 0-(none), 12- or, 32-bit displacement needed */
char *e; /* The expression in the source instruction from
* which the displacement should be determined
*/
}
memS;
/* The two pieces of info we need to generate a register operand */
struct regop
{
int mode; /* 0 =>local/global/spec reg; 1=> literal or fp reg */
int special; /* 0 =>not a sfr; 1=> is a sfr (not valid w/mode=0) */
int n; /* Register number or literal value */
};
/* Number and assembler mnemonic for all registers that can appear in operands */
static struct
{
char *reg_name;
int reg_num;
}
regnames[] =
{
{ "pfp", 0 },
{ "sp", 1 },
{ "rip", 2 },
{ "r3", 3 },
{ "r4", 4 },
{ "r5", 5 },
{ "r6", 6 },
{ "r7", 7 },
{ "r8", 8 },
{ "r9", 9 },
{ "r10", 10 },
{ "r11", 11 },
{ "r12", 12 },
{ "r13", 13 },
{ "r14", 14 },
{ "r15", 15 },
{ "g0", 16 },
{ "g1", 17 },
{ "g2", 18 },
{ "g3", 19 },
{ "g4", 20 },
{ "g5", 21 },
{ "g6", 22 },
{ "g7", 23 },
{ "g8", 24 },
{ "g9", 25 },
{ "g10", 26 },
{ "g11", 27 },
{ "g12", 28 },
{ "g13", 29 },
{ "g14", 30 },
{ "fp", 31 },
/* Numbers for special-function registers are for assembler internal
use only: they are scaled back to range [0-31] for binary output. */
#define SF0 32
{ "sf0", 32 },
{ "sf1", 33 },
{ "sf2", 34 },
{ "sf3", 35 },
{ "sf4", 36 },
{ "sf5", 37 },
{ "sf6", 38 },
{ "sf7", 39 },
{ "sf8", 40 },
{ "sf9", 41 },
{ "sf10", 42 },
{ "sf11", 43 },
{ "sf12", 44 },
{ "sf13", 45 },
{ "sf14", 46 },
{ "sf15", 47 },
{ "sf16", 48 },
{ "sf17", 49 },
{ "sf18", 50 },
{ "sf19", 51 },
{ "sf20", 52 },
{ "sf21", 53 },
{ "sf22", 54 },
{ "sf23", 55 },
{ "sf24", 56 },
{ "sf25", 57 },
{ "sf26", 58 },
{ "sf27", 59 },
{ "sf28", 60 },
{ "sf29", 61 },
{ "sf30", 62 },
{ "sf31", 63 },
/* Numbers for floating point registers are for assembler internal use
* only: they are scaled back to [0-3] for binary output.
*/
#define FP0 64
{ "fp0", 64 },
{ "fp1", 65 },
{ "fp2", 66 },
{ "fp3", 67 },
{ NULL, 0 }, /* END OF LIST */
};
#define IS_RG_REG(n) ((0 <= (n)) && ((n) < SF0))
#define IS_SF_REG(n) ((SF0 <= (n)) && ((n) < FP0))
#define IS_FP_REG(n) ((n) >= FP0)
/* Number and assembler mnemonic for all registers that can appear as 'abase'
* (indirect addressing) registers.
*/
static struct
{
char *areg_name;
int areg_num;
}
aregs[] =
{
{ "(pfp)", 0 },
{ "(sp)", 1 },
{ "(rip)", 2 },
{ "(r3)", 3 },
{ "(r4)", 4 },
{ "(r5)", 5 },
{ "(r6)", 6 },
{ "(r7)", 7 },
{ "(r8)", 8 },
{ "(r9)", 9 },
{ "(r10)", 10 },
{ "(r11)", 11 },
{ "(r12)", 12 },
{ "(r13)", 13 },
{ "(r14)", 14 },
{ "(r15)", 15 },
{ "(g0)", 16 },
{ "(g1)", 17 },
{ "(g2)", 18 },
{ "(g3)", 19 },
{ "(g4)", 20 },
{ "(g5)", 21 },
{ "(g6)", 22 },
{ "(g7)", 23 },
{ "(g8)", 24 },
{ "(g9)", 25 },
{ "(g10)", 26 },
{ "(g11)", 27 },
{ "(g12)", 28 },
{ "(g13)", 29 },
{ "(g14)", 30 },
{ "(fp)", 31 },
#define IPREL 32
/* For assembler internal use only: this number never appears in binary
output. */
{ "(ip)", IPREL },
{ NULL, 0 }, /* END OF LIST */
};
/* Hash tables */
static struct hash_control *op_hash = NULL; /* Opcode mnemonics */
static struct hash_control *reg_hash = NULL; /* Register name hash table */
static struct hash_control *areg_hash = NULL; /* Abase register hash table */
/* Architecture for which we are assembling */
#define ARCH_ANY 0 /* Default: no architecture checking done */
#define ARCH_KA 1
#define ARCH_KB 2
#define ARCH_MC 3
#define ARCH_CA 4
int architecture = ARCH_ANY; /* Architecture requested on invocation line */
int iclasses_seen = 0; /* OR of instruction classes (I_* constants)
* for which we've actually assembled
* instructions.
*/
/* BRANCH-PREDICTION INSTRUMENTATION
*
* The following supports generation of branch-prediction instrumentation
* (turned on by -b switch). The instrumentation collects counts
* of branches taken/not-taken for later input to a utility that will
* set the branch prediction bits of the instructions in accordance with
* the behavior observed. (Note that the KX series does not have
* brach-prediction.)
*
* The instrumentation consists of:
*
* (1) before and after each conditional branch, a call to an external
* routine that increments and steps over an inline counter. The
* counter itself, initialized to 0, immediately follows the call
* instruction. For each branch, the counter following the branch
* is the number of times the branch was not taken, and the difference
* between the counters is the number of times it was taken. An
* example of an instrumented conditional branch:
*
* call BR_CNT_FUNC
* .word 0
* LBRANCH23: be label
* call BR_CNT_FUNC
* .word 0
*
* (2) a table of pointers to the instrumented branches, so that an
* external postprocessing routine can locate all of the counters.
* the table begins with a 2-word header: a pointer to the next in
* a linked list of such tables (initialized to 0); and a count
* of the number of entries in the table (exclusive of the header.
*
* Note that input source code is expected to already contain calls
* an external routine that will link the branch local table into a
* list of such tables.
*/
static int br_cnt = 0; /* Number of branches instrumented so far.
* Also used to generate unique local labels
* for each instrumented branch
*/
#define BR_LABEL_BASE "LBRANCH"
/* Basename of local labels on instrumented
* branches, to avoid conflict with compiler-
* generated local labels.
*/
#define BR_CNT_FUNC "__inc_branch"
/* Name of the external routine that will
* increment (and step over) an inline counter.
*/
#define BR_TAB_NAME "__BRANCH_TABLE__"
/* Name of the table of pointers to branches.
* A local (i.e., non-external) symbol.
*/
/*****************************************************************************
* md_begin: One-time initialization.
*
* Set up hash tables.
*
**************************************************************************** */
void
md_begin ()
{
int i; /* Loop counter */
const struct i960_opcode *oP; /* Pointer into opcode table */
char *retval; /* Value returned by hash functions */
if (((op_hash = hash_new ()) == 0)
|| ((reg_hash = hash_new ()) == 0)
|| ((areg_hash = hash_new ()) == 0))
{
as_fatal ("virtual memory exceeded");
}
retval = ""; /* For some reason, the base assembler uses an empty
* string for "no error message", instead of a NULL
* pointer.
*/
for (oP = i960_opcodes; oP->name && !*retval; oP++)
{
retval = hash_insert (op_hash, oP->name, oP);
}
for (i = 0; regnames[i].reg_name && !*retval; i++)
{
retval = hash_insert (reg_hash, regnames[i].reg_name,
&regnames[i].reg_num);
}
for (i = 0; aregs[i].areg_name && !*retval; i++)
{
retval = hash_insert (areg_hash, aregs[i].areg_name,
&aregs[i].areg_num);
}
if (*retval)
{
as_fatal ("Hashing returned \"%s\".", retval);
}
} /* md_begin() */
/*****************************************************************************
* md_end: One-time final cleanup
*
* None necessary
*
**************************************************************************** */
void
md_end ()
{
}
/*****************************************************************************
* md_assemble: Assemble an instruction
*
* Assumptions about the passed-in text:
* - all comments, labels removed
* - text is an instruction
* - all white space compressed to single blanks
* - all character constants have been replaced with decimal
*
**************************************************************************** */
void
md_assemble (textP)
char *textP; /* Source text of instruction */
{
char *args[4]; /* Parsed instruction text, containing NO whitespace:
* arg[0]->opcode mnemonic
* arg[1-3]->operands, with char constants
* replaced by decimal numbers
*/
int n_ops; /* Number of instruction operands */
int callx;
struct i960_opcode *oP;
/* Pointer to instruction description */
int branch_predict;
/* TRUE iff opcode mnemonic included branch-prediction
* suffix (".f" or ".t")
*/
long bp_bits; /* Setting of branch-prediction bit(s) to be OR'd
* into instruction opcode of CTRL/COBR format
* instructions.
*/
int n; /* Offset of last character in opcode mnemonic */
static const char bp_error_msg[] = "branch prediction invalid on this opcode";
/* Parse instruction into opcode and operands */
memset (args, '\0', sizeof (args));
n_ops = i_scan (textP, args);
if (n_ops == -1)
{
return; /* Error message already issued */
}
/* Do "macro substitution" (sort of) on 'ldconst' pseudo-instruction */
if (!strcmp (args[0], "ldconst"))
{
n_ops = parse_ldconst (args);
if (n_ops == -1)
{
return;
}
}
/* Check for branch-prediction suffix on opcode mnemonic, strip it off */
n = strlen (args[0]) - 1;
branch_predict = 0;
bp_bits = 0;
if (args[0][n - 1] == '.' && (args[0][n] == 't' || args[0][n] == 'f'))
{
/* We could check here to see if the target architecture
* supports branch prediction, but why bother? The bit
* will just be ignored by processors that don't use it.
*/
branch_predict = 1;
bp_bits = (args[0][n] == 't') ? BP_TAKEN : BP_NOT_TAKEN;
args[0][n - 1] = '\0'; /* Strip suffix from opcode mnemonic */
}
/* Look up opcode mnemonic in table and check number of operands.
* Check that opcode is legal for the target architecture.
* If all looks good, assemble instruction.
*/
oP = (struct i960_opcode *) hash_find (op_hash, args[0]);
if (!oP || !targ_has_iclass (oP->iclass))
{
as_bad ("invalid opcode, \"%s\".", args[0]);
}
else if (n_ops != oP->num_ops)
{
as_bad ("improper number of operands. expecting %d, got %d", oP->num_ops, n_ops);
}
else
{
switch (oP->format)
{
case FBRA:
case CTRL:
ctrl_fmt (args[1], oP->opcode | bp_bits, oP->num_ops);
if (oP->format == FBRA)
{
/* Now generate a 'bno' to same arg */
ctrl_fmt (args[1], BNO | bp_bits, 1);
}
break;
case COBR:
case COJ:
cobr_fmt (args, oP->opcode | bp_bits, oP);
break;
case REG:
if (branch_predict)
{
as_warn (bp_error_msg);
}
reg_fmt (args, oP);
break;
case MEM1:
if (args[0][0] == 'c' && args[0][1] == 'a')
{
if (branch_predict)
{
as_warn (bp_error_msg);
}
mem_fmt (args, oP, 1);
break;
}
case MEM2:
case MEM4:
case MEM8:
case MEM12:
case MEM16:
if (branch_predict)
{
as_warn (bp_error_msg);
}
mem_fmt (args, oP, 0);
break;
case CALLJ:
if (branch_predict)
{
as_warn (bp_error_msg);
}
/* Output opcode & set up "fixup" (relocation);
* flag relocation as 'callj' type.
*/
know (oP->num_ops == 1);
get_cdisp (args[1], "CTRL", oP->opcode, 24, 0, 1);
break;
default:
BAD_CASE (oP->format);
break;
}
}
} /* md_assemble() */
/*****************************************************************************
* md_number_to_chars: convert a number to target byte order
*
**************************************************************************** */
void
md_number_to_chars (buf, value, n)
char *buf; /* Put output here */
long value; /* The integer to be converted */
int n; /* Number of bytes to output (significant bytes
* in 'value')
*/
{
while (n--)
{
*buf++ = value;
value >>= 8;
}
/* XXX line number probably botched for this warning message. */
if (value != 0 && value != -1)
{
as_bad ("Displacement too long for instruction field length.");
}
return;
} /* md_number_to_chars() */
/*****************************************************************************
* md_chars_to_number: convert from target byte order to host byte order.
*
**************************************************************************** */
int
md_chars_to_number (val, n)
unsigned char *val; /* Value in target byte order */
int n; /* Number of bytes in the input */
{
int retval;
for (retval = 0; n--;)
{
retval <<= 8;
retval |= val[n];
}
return retval;
}
#define MAX_LITTLENUMS 6
#define LNUM_SIZE sizeof(LITTLENUM_TYPE)
/*****************************************************************************
* md_atof: convert ascii to floating point
*
* Turn a string at input_line_pointer into a floating point constant of type
* 'type', and store the appropriate bytes at *litP. The number of LITTLENUMS
* emitted is returned at 'sizeP'. An error message is returned, or a pointer
* to an empty message if OK.
*
* Note we call the i386 floating point routine, rather than complicating
* things with more files or symbolic links.
*
**************************************************************************** */
char *
md_atof (type, litP, sizeP)
int type;
char *litP;
int *sizeP;
{
LITTLENUM_TYPE words[MAX_LITTLENUMS];
LITTLENUM_TYPE *wordP;
int prec;
char *t;
char *atof_ieee ();
switch (type)
{
case 'f':
case 'F':
prec = 2;
break;
case 'd':
case 'D':
prec = 4;
break;
case 't':
case 'T':
prec = 5;
type = 'x'; /* That's what atof_ieee() understands */
break;
default:
*sizeP = 0;
return "Bad call to md_atof()";
}
t = atof_ieee (input_line_pointer, type, words);
if (t)
{
input_line_pointer = t;
}
*sizeP = prec * LNUM_SIZE;
/* Output the LITTLENUMs in REVERSE order in accord with i80960
* word-order. (Dunno why atof_ieee doesn't do it in the right
* order in the first place -- probably because it's a hack of
* atof_m68k.)
*/
for (wordP = words + prec - 1; prec--;)
{
md_number_to_chars (litP, (long) (*wordP--), LNUM_SIZE);
litP += sizeof (LITTLENUM_TYPE);
}
return ""; /* Someone should teach Dean about null pointers */
}
/*****************************************************************************
* md_number_to_imm
*
**************************************************************************** */
void
md_number_to_imm (buf, val, n)
char *buf;
long val;
int n;
{
md_number_to_chars (buf, val, n);
}
/*****************************************************************************
* md_number_to_disp
*
**************************************************************************** */
void
md_number_to_disp (buf, val, n)
char *buf;
long val;
int n;
{
md_number_to_chars (buf, val, n);
}
/*****************************************************************************
* md_number_to_field:
*
* Stick a value (an address fixup) into a bit field of
* previously-generated instruction.
*
**************************************************************************** */
void
md_number_to_field (instrP, val, bfixP)
char *instrP; /* Pointer to instruction to be fixed */
long val; /* Address fixup value */
bit_fixS *bfixP; /* Description of bit field to be fixed up */
{
int numbits; /* Length of bit field to be fixed */
long instr; /* 32-bit instruction to be fixed-up */
long sign; /* 0 or -1, according to sign bit of 'val' */
/* Convert instruction back to host byte order
*/
instr = md_chars_to_number (instrP, 4);
/* Surprise! -- we stored the number of bits
* to be modified rather than a pointer to a structure.
*/
numbits = (int) bfixP;
if (numbits == 1)
{
/* This is a no-op, stuck here by reloc_callj() */
return;
}
know ((numbits == 13) || (numbits == 24));
/* Propagate sign bit of 'val' for the given number of bits.
* Result should be all 0 or all 1
*/
sign = val >> ((int) numbits - 1);
if (((val < 0) && (sign != -1))
|| ((val > 0) && (sign != 0)))
{
as_bad ("Fixup of %d too large for field width of %d",
val, numbits);
}
else
{
/* Put bit field into instruction and write back in target
* byte order.
*/
val &= ~(-1 << (int) numbits); /* Clear unused sign bits */
instr |= val;
md_number_to_chars (instrP, instr, 4);
}
} /* md_number_to_field() */
/*****************************************************************************
* md_parse_option
* Invocation line includes a switch not recognized by the base assembler.
* See if it's a processor-specific option. For the 960, these are:
*
* -norelax:
* Conditional branch instructions that require displacements
* greater than 13 bits (or that have external targets) should
* generate errors. The default is to replace each such
* instruction with the corresponding compare (or chkbit) and
* branch instructions. Note that the Intel "j" cobr directives
* are ALWAYS "de-optimized" in this way when necessary,
* regardless of the setting of this option.
*
* -b:
* Add code to collect information about branches taken, for
* later optimization of branch prediction bits by a separate
* tool. COBR and CNTL format instructions have branch
* prediction bits (in the CX architecture); if "BR" represents
* an instruction in one of these classes, the following rep-
* resents the code generated by the assembler:
*
* call <increment routine>
* .word 0 # pre-counter
* Label: BR
* call <increment routine>
* .word 0 # post-counter
*
* A table of all such "Labels" is also generated.
*
*
* -AKA, -AKB, -AKC, -ASA, -ASB, -AMC, -ACA:
* Select the 80960 architecture. Instructions or features not
* supported by the selected architecture cause fatal errors.
* The default is to generate code for any instruction or feature
* that is supported by SOME version of the 960 (even if this
* means mixing architectures!).
*
**************************************************************************** */
int
md_parse_option (argP, cntP, vecP)
char **argP;
int *cntP;
char ***vecP;
{
char *p;
struct tabentry
{
char *flag;
int arch;
};
static struct tabentry arch_tab[] =
{
"KA", ARCH_KA,
"KB", ARCH_KB,
"SA", ARCH_KA, /* Synonym for KA */
"SB", ARCH_KB, /* Synonym for KB */
"KC", ARCH_MC, /* Synonym for MC */
"MC", ARCH_MC,
"CA", ARCH_CA,
NULL, 0
};
struct tabentry *tp;
if (!strcmp (*argP, "linkrelax"))
{
linkrelax = 1;
flagseen['L'] = 1;
}
else if (!strcmp (*argP, "norelax"))
{
norelax = 1;
}
else if (**argP == 'b')
{
instrument_branches = 1;
}
else if (**argP == 'A')
{
p = (*argP) + 1;
for (tp = arch_tab; tp->flag != NULL; tp++)
{
if (!strcmp (p, tp->flag))
{
break;
}
}
if (tp->flag == NULL)
{
as_bad ("unknown architecture: %s", p);
}
else
{
architecture = tp->arch;
}
}
else
{
/* Unknown option */
(*argP)++;
return 0;
}
**argP = '\0'; /* Done parsing this switch */
return 1;
}
/*****************************************************************************
* md_convert_frag:
* Called by base assembler after address relaxation is finished: modify
* variable fragments according to how much relaxation was done.
*
* If the fragment substate is still 1, a 13-bit displacement was enough
* to reach the symbol in question. Set up an address fixup, but otherwise
* leave the cobr instruction alone.
*
* If the fragment substate is 2, a 13-bit displacement was not enough.
* Replace the cobr with a two instructions (a compare and a branch).
*
**************************************************************************** */
void
md_convert_frag (headers, fragP)
object_headers *headers;
fragS *fragP;
{
fixS *fixP; /* Structure describing needed address fix */
switch (fragP->fr_subtype)
{
case 1:
/* LEAVE SINGLE COBR INSTRUCTION */
fixP = fix_new (fragP,
fragP->fr_opcode - fragP->fr_literal,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
1,
NO_RELOC);
fixP->fx_bit_fixP = (bit_fixS *) 13; /* size of bit field */
break;
case 2:
/* REPLACE COBR WITH COMPARE/BRANCH INSTRUCTIONS */
relax_cobr (fragP);
break;
default:
BAD_CASE (fragP->fr_subtype);
break;
}
}
/*****************************************************************************
* md_estimate_size_before_relax: How much does it look like *fragP will grow?
*
* Called by base assembler just before address relaxation.
* Return the amount by which the fragment will grow.
*
* Any symbol that is now undefined will not become defined; cobr's
* based on undefined symbols will have to be replaced with a compare
* instruction and a branch instruction, and the code fragment will grow
* by 4 bytes.
*
**************************************************************************** */
int
md_estimate_size_before_relax (fragP, segment_type)
register fragS *fragP;
register segT segment_type;
{
/* If symbol is undefined in this segment, go to "relaxed" state
* (compare and branch instructions instead of cobr) right now.
*/
if (S_GET_SEGMENT (fragP->fr_symbol) != segment_type)
{
relax_cobr (fragP);
return 4;
}
return 0;
} /* md_estimate_size_before_relax() */
/*****************************************************************************
* md_ri_to_chars:
* This routine exists in order to overcome machine byte-order problems
* when dealing with bit-field entries in the relocation_info struct.
*
* But relocation info will be used on the host machine only (only
* executable code is actually downloaded to the i80960). Therefore,
* we leave it in host byte order.
*
* The above comment is no longer true. This routine now really
* does do the reordering (Ian Taylor 28 Aug 92).
*
**************************************************************************** */
void
md_ri_to_chars (where, ri)
char *where;
struct relocation_info *ri;
{
md_number_to_chars (where, ri->r_address,
sizeof (ri->r_address));
where[4] = ri->r_index & 0x0ff;
where[5] = (ri->r_index >> 8) & 0x0ff;
where[6] = (ri->r_index >> 16) & 0x0ff;
where[7] = ((ri->r_pcrel << 0)
| (ri->r_length << 1)
| (ri->r_extern << 3)
| (ri->r_bsr << 4)
| (ri->r_disp << 5)
| (ri->r_callj << 6));
} /* md_ri_to_chars() */
#ifndef WORKING_DOT_WORD
int md_short_jump_size = 0;
int md_long_jump_size = 0;
void
md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
char *ptr;
long from_addr;
long to_addr;
fragS *frag;
symbolS *to_symbol;
{
as_fatal ("failed sanity check.");
}
void
md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
char *ptr;
long from_addr, to_addr;
fragS *frag;
symbolS *to_symbol;
{
as_fatal ("failed sanity check.");
}
#endif
/*************************************************************
* *
* FOLLOWING ARE THE LOCAL ROUTINES, IN ALPHABETICAL ORDER *
* *
************************************************************ */
/*****************************************************************************
* brcnt_emit: Emit code to increment inline branch counter.
*
* See the comments above the declaration of 'br_cnt' for details on
* branch-prediction instrumentation.
**************************************************************************** */
static void
brcnt_emit ()
{
ctrl_fmt (BR_CNT_FUNC, CALL, 1); /* Emit call to "increment" routine */
emit (0); /* Emit inline counter to be incremented */
}
/*****************************************************************************
* brlab_next: generate the next branch local label
*
* See the comments above the declaration of 'br_cnt' for details on
* branch-prediction instrumentation.
**************************************************************************** */
static char *
brlab_next ()
{
static char buf[20];
sprintf (buf, "%s%d", BR_LABEL_BASE, br_cnt++);
return buf;
}
/*****************************************************************************
* brtab_emit: generate the fetch-prediction branch table.
*
* See the comments above the declaration of 'br_cnt' for details on
* branch-prediction instrumentation.
*
* The code emitted here would be functionally equivalent to the following
* example assembler source.
*
* .data
* .align 2
* BR_TAB_NAME:
* .word 0 # link to next table
* .word 3 # length of table
* .word LBRANCH0 # 1st entry in table proper
* .word LBRANCH1
* .word LBRANCH2
***************************************************************************** */
void
brtab_emit ()
{
int i;
char buf[20];
char *p; /* Where the binary was output to */
fixS *fixP; /*->description of deferred address fixup */
if (!instrument_branches)
{
return;
}
subseg_new (SEG_DATA, 0); /* .data */
frag_align (2, 0); /* .align 2 */
record_alignment (now_seg, 2);
colon (BR_TAB_NAME); /* BR_TAB_NAME: */
emit (0); /* .word 0 #link to next table */
emit (br_cnt); /* .word n #length of table */
for (i = 0; i < br_cnt; i++)
{
sprintf (buf, "%s%d", BR_LABEL_BASE, i);
p = emit (0);
fixP = fix_new (frag_now,
p - frag_now->fr_literal,
4,
symbol_find (buf),
0,
0,
0,
NO_RELOC);
fixP->fx_im_disp = 2; /* 32-bit displacement fix */
}
}
/*****************************************************************************
* cobr_fmt: generate a COBR-format instruction
*
**************************************************************************** */
static
void
cobr_fmt (arg, opcode, oP)
char *arg[]; /* arg[0]->opcode mnemonic, arg[1-3]->operands (ascii) */
long opcode; /* Opcode, with branch-prediction bits already set
* if necessary.
*/
struct i960_opcode *oP;
/*->description of instruction */
{
long instr; /* 32-bit instruction */
struct regop regop; /* Description of register operand */
int n; /* Number of operands */
int var_frag; /* 1 if varying length code fragment should
* be emitted; 0 if an address fix
* should be emitted.
*/
instr = opcode;
n = oP->num_ops;
if (n >= 1)
{
/* First operand (if any) of a COBR is always a register
* operand. Parse it.
*/
parse_regop (&regop, arg[1], oP->operand[0]);
instr |= (regop.n << 19) | (regop.mode << 13);
}
if (n >= 2)
{
/* Second operand (if any) of a COBR is always a register
* operand. Parse it.
*/
parse_regop (&regop, arg[2], oP->operand[1]);
instr |= (regop.n << 14) | regop.special;
}
if (n < 3)
{
emit (instr);
}
else
{
if (instrument_branches)
{
brcnt_emit ();
colon (brlab_next ());
}
/* A third operand to a COBR is always a displacement.
* Parse it; if it's relaxable (a cobr "j" directive, or any
* cobr other than bbs/bbc when the "-norelax" option is not in
* use) set up a variable code fragment; otherwise set up an
* address fix.
*/
var_frag = !norelax || (oP->format == COJ); /* TRUE or FALSE */
get_cdisp (arg[3], "COBR", instr, 13, var_frag, 0);
if (instrument_branches)
{
brcnt_emit ();
}
}
} /* cobr_fmt() */
/*****************************************************************************
* ctrl_fmt: generate a CTRL-format instruction
*
**************************************************************************** */
static
void
ctrl_fmt (targP, opcode, num_ops)
char *targP; /* Pointer to text of lone operand (if any) */
long opcode; /* Template of instruction */
int num_ops; /* Number of operands */
{
int instrument; /* TRUE iff we should add instrumentation to track
* how often the branch is taken
*/
if (num_ops == 0)
{
emit (opcode); /* Output opcode */
}
else
{
instrument = instrument_branches && (opcode != CALL)
&& (opcode != B) && (opcode != RET) && (opcode != BAL);
if (instrument)
{
brcnt_emit ();
colon (brlab_next ());
}
/* The operand MUST be an ip-relative displacment. Parse it
* and set up address fix for the instruction we just output.
*/
get_cdisp (targP, "CTRL", opcode, 24, 0, 0);
if (instrument)
{
brcnt_emit ();
}
}
}
/*****************************************************************************
* emit: output instruction binary
*
* Output instruction binary, in target byte order, 4 bytes at a time.
* Return pointer to where it was placed.
*
**************************************************************************** */
static
char *
emit (instr)
long instr; /* Word to be output, host byte order */
{
char *toP; /* Where to output it */
toP = frag_more (4); /* Allocate storage */
md_number_to_chars (toP, instr, 4); /* Convert to target byte order */
return toP;
}
/*****************************************************************************
* get_args: break individual arguments out of comma-separated list
*
* Input assumptions:
* - all comments and labels have been removed
* - all strings of whitespace have been collapsed to a single blank.
* - all character constants ('x') have been replaced with decimal
*
* Output:
* args[0] is untouched. args[1] points to first operand, etc. All args:
* - are NULL-terminated
* - contain no whitespace
*
* Return value:
* Number of operands (0,1,2, or 3) or -1 on error.
*
**************************************************************************** */
static int
get_args (p, args)
register char *p; /* Pointer to comma-separated operands; MUCKED BY US */
char *args[]; /* Output arg: pointers to operands placed in args[1-3].
* MUST ACCOMMODATE 4 ENTRIES (args[0-3]).
*/
{
register int n; /* Number of operands */
register char *to;
/* char buf[4]; */
/* int len; */
/* Skip lead white space */
while (*p == ' ')
{
p++;
}
if (*p == '\0')
{
return 0;
}
n = 1;
args[1] = p;
/* Squeze blanks out by moving non-blanks toward start of string.
* Isolate operands, whenever comma is found.
*/
to = p;
while (*p != '\0')
{
if (*p == ' ')
{
p++;
}
else if (*p == ',')
{
/* Start of operand */
if (n == 3)
{
as_bad ("too many operands");
return -1;
}
*to++ = '\0'; /* Terminate argument */
args[++n] = to; /* Start next argument */
p++;
}
else
{
*to++ = *p++;
}
}
*to = '\0';
return n;
}
/*****************************************************************************
* get_cdisp: handle displacement for a COBR or CTRL instruction.
*
* Parse displacement for a COBR or CTRL instruction.
*
* If successful, output the instruction opcode and set up for it,
* depending on the arg 'var_frag', either:
* o an address fixup to be done when all symbol values are known, or
* o a varying length code fragment, with address fixup info. This
* will be done for cobr instructions that may have to be relaxed
* in to compare/branch instructions (8 bytes) if the final address
* displacement is greater than 13 bits.
*
**************************************************************************** */
static
void
get_cdisp (dispP, ifmtP, instr, numbits, var_frag, callj)
char *dispP; /*->displacement as specified in source instruction */
char *ifmtP; /*->"COBR" or "CTRL" (for use in error message) */
long instr; /* Instruction needing the displacement */
int numbits; /* # bits of displacement (13 for COBR, 24 for CTRL) */
int var_frag; /* 1 if varying length code fragment should be emitted;
* 0 if an address fix should be emitted.
*/
int callj; /* 1 if callj relocation should be done; else 0 */
{
expressionS e; /* Parsed expression */
fixS *fixP; /* Structure describing needed address fix */
char *outP; /* Where instruction binary is output to */
fixP = NULL;
switch (parse_expr (dispP, &e))
{
case SEG_GOOF:
as_bad ("expression syntax error");
break;
case SEG_TEXT:
case SEG_UNKNOWN:
if (var_frag)
{
outP = frag_more (8); /* Allocate worst-case storage */
md_number_to_chars (outP, instr, 4);
frag_variant (rs_machine_dependent, 4, 4, 1,
adds (e), offs (e), outP, 0, 0);
}
else
{
/* Set up a new fix structure, so address can be updated
* when all symbol values are known.
*/
outP = emit (instr);
fixP = fix_new (frag_now,
outP - frag_now->fr_literal,
4,
adds (e),
0,
offs (e),
1,
NO_RELOC);
fixP->fx_callj = callj;
/* We want to modify a bit field when the address is
* known. But we don't need all the garbage in the
* bit_fix structure. So we're going to lie and store
* the number of bits affected instead of a pointer.
*/
fixP->fx_bit_fixP = (bit_fixS *) numbits;
}
break;
case SEG_DATA:
case SEG_BSS:
as_bad ("attempt to branch into different segment");
break;
default:
as_bad ("target of %s instruction must be a label", ifmtP);
break;
}
}
/*****************************************************************************
* get_ispec: parse a memory operand for an index specification
*
* Here, an "index specification" is taken to be anything surrounded
* by square brackets and NOT followed by anything else.
*
* If it's found, detach it from the input string, remove the surrounding
* square brackets, and return a pointer to it. Otherwise, return NULL.
*
**************************************************************************** */
static
char *
get_ispec (textP)
char *textP; /*->memory operand from source instruction, no white space */
{
char *start; /*->start of index specification */
char *end; /*->end of index specification */
/* Find opening square bracket, if any
*/
start = strchr (textP, '[');
if (start != NULL)
{
/* Eliminate '[', detach from rest of operand */
*start++ = '\0';
end = strchr (start, ']');
if (end == NULL)
{
as_bad ("unmatched '['");
}
else
{
/* Eliminate ']' and make sure it was the last thing
* in the string.
*/
*end = '\0';
if (*(end + 1) != '\0')
{
as_bad ("garbage after index spec ignored");
}
}
}
return start;
}
/*****************************************************************************
* get_regnum:
*
* Look up a (suspected) register name in the register table and return the
* associated register number (or -1 if not found).
*
**************************************************************************** */
static
int
get_regnum (regname)
char *regname; /* Suspected register name */
{
int *rP;
rP = (int *) hash_find (reg_hash, regname);
return (rP == NULL) ? -1 : *rP;
}
/*****************************************************************************
* i_scan: perform lexical scan of ascii assembler instruction.
*
* Input assumptions:
* - input string is an i80960 instruction (not a pseudo-op)
* - all comments and labels have been removed
* - all strings of whitespace have been collapsed to a single blank.
*
* Output:
* args[0] points to opcode, other entries point to operands. All strings:
* - are NULL-terminated
* - contain no whitespace
* - have character constants ('x') replaced with a decimal number
*
* Return value:
* Number of operands (0,1,2, or 3) or -1 on error.
*
**************************************************************************** */
static int
i_scan (iP, args)
register char *iP; /* Pointer to ascii instruction; MUCKED BY US. */
char *args[]; /* Output arg: pointers to opcode and operands placed
* here. MUST ACCOMMODATE 4 ENTRIES.
*/
{
/* Isolate opcode */
if (*(iP) == ' ')
{
iP++;
} /* Skip lead space, if any */
args[0] = iP;
for (; *iP != ' '; iP++)
{
if (*iP == '\0')
{
/* There are no operands */
if (args[0] == iP)
{
/* We never moved: there was no opcode either! */
as_bad ("missing opcode");
return -1;
}
return 0;
}
}
*iP++ = '\0'; /* Terminate opcode */
return (get_args (iP, args));
} /* i_scan() */
/*****************************************************************************
* mem_fmt: generate a MEMA- or MEMB-format instruction
*
**************************************************************************** */
static void
mem_fmt (args, oP, callx)
char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
struct i960_opcode *oP; /* Pointer to description of instruction */
int callx; /* Is this a callx opcode */
{
int i; /* Loop counter */
struct regop regop; /* Description of register operand */
char opdesc; /* Operand descriptor byte */
memS instr; /* Description of binary to be output */
char *outP; /* Where the binary was output to */
expressionS expr; /* Parsed expression */
fixS *fixP; /*->description of deferred address fixup */
memset (&instr, '\0', sizeof (memS));
instr.opcode = oP->opcode;
/* Process operands. */
for (i = 1; i <= oP->num_ops; i++)
{
opdesc = oP->operand[i - 1];
if (MEMOP (opdesc))
{
parse_memop (&instr, args[i], oP->format);
}
else
{
parse_regop (&regop, args[i], opdesc);
instr.opcode |= regop.n << 19;
}
}
/* Output opcode */
outP = emit (instr.opcode);
if (instr.disp == 0)
{
return;
}
/* Parse and process the displacement */
switch (parse_expr (instr.e, &expr))
{
case SEG_GOOF:
as_bad ("expression syntax error");
break;
case SEG_ABSOLUTE:
if (instr.disp == 32)
{
(void) emit (offs (expr)); /* Output displacement */
}
else
{
/* 12-bit displacement */
if (offs (expr) & ~0xfff)
{
/* Won't fit in 12 bits: convert already-output
* instruction to MEMB format, output
* displacement.
*/
mema_to_memb (outP);
(void) emit (offs (expr));
}
else
{
/* WILL fit in 12 bits: OR into opcode and
* overwrite the binary we already put out
*/
instr.opcode |= offs (expr);
md_number_to_chars (outP, instr.opcode, 4);
}
}
break;
case SEG_DIFFERENCE:
case SEG_TEXT:
case SEG_DATA:
case SEG_BSS:
case SEG_UNKNOWN:
if (instr.disp == 12)
{
/* Displacement is dependent on a symbol, whose value
* may change at link time. We HAVE to reserve 32 bits.
* Convert already-output opcode to MEMB format.
*/
mema_to_memb (outP);
}
/* Output 0 displacement and set up address fixup for when
* this symbol's value becomes known.
*/
outP = emit ((long) 0);
fixP = fix_new (frag_now,
outP - frag_now->fr_literal,
4,
adds (expr),
subs (expr),
offs (expr),
0,
NO_RELOC);
fixP->fx_im_disp = 2; /* 32-bit displacement fix */
fixP->fx_bsr = callx; /*SAC LD RELAX HACK *//* Mark reloc as being in i stream */
break;
default:
BAD_CASE (segs (expr));
break;
}
} /* memfmt() */
/*****************************************************************************
* mema_to_memb: convert a MEMA-format opcode to a MEMB-format opcode.
*
* There are 2 possible MEMA formats:
* - displacement only
* - displacement + abase
*
* They are distinguished by the setting of the MEMA_ABASE bit.
*
**************************************************************************** */
static void
mema_to_memb (opcodeP)
char *opcodeP; /* Where to find the opcode, in target byte order */
{
long opcode; /* Opcode in host byte order */
long mode; /* Mode bits for MEMB instruction */
opcode = md_chars_to_number (opcodeP, 4);
know (!(opcode & MEMB_BIT));
mode = MEMB_BIT | D_BIT;
if (opcode & MEMA_ABASE)
{
mode |= A_BIT;
}
opcode &= 0xffffc000; /* Clear MEMA offset and mode bits */
opcode |= mode; /* Set MEMB mode bits */
md_number_to_chars (opcodeP, opcode, 4);
} /* mema_to_memb() */
/*****************************************************************************
* parse_expr: parse an expression
*
* Use base assembler's expression parser to parse an expression.
* It, unfortunately, runs off a global which we have to save/restore
* in order to make it work for us.
*
* An empty expression string is treated as an absolute 0.
*
* Return "segment" to which the expression evaluates.
* Return SEG_GOOF regardless of expression evaluation if entire input
* string is not consumed in the evaluation -- tolerate no dangling junk!
*
**************************************************************************** */
static
segT
parse_expr (textP, expP)
char *textP; /* Text of expression to be parsed */
expressionS *expP; /* Where to put the results of parsing */
{
char *save_in; /* Save global here */
segT seg; /* Segment to which expression evaluates */
symbolS *symP;
know (textP);
if (*textP == '\0')
{
/* Treat empty string as absolute 0 */
expP->X_add_symbol = expP->X_subtract_symbol = NULL;
expP->X_add_number = 0;
seg = expP->X_seg = SEG_ABSOLUTE;
}
else
{
save_in = input_line_pointer; /* Save global */
input_line_pointer = textP; /* Make parser work for us */
seg = expression (expP);
if (input_line_pointer - textP != strlen (textP))
{
/* Did not consume all of the input */
seg = SEG_GOOF;
}
symP = expP->X_add_symbol;
if (symP && (hash_find (reg_hash, S_GET_NAME (symP))))
{
/* Register name in an expression */
seg = SEG_GOOF;
}
input_line_pointer = save_in; /* Restore global */
}
return seg;
}
/*****************************************************************************
* parse_ldcont:
* Parse and replace a 'ldconst' pseudo-instruction with an appropriate
* i80960 instruction.
*
* Assumes the input consists of:
* arg[0] opcode mnemonic ('ldconst')
* arg[1] first operand (constant)
* arg[2] name of register to be loaded
*
* Replaces opcode and/or operands as appropriate.
*
* Returns the new number of arguments, or -1 on failure.
*
**************************************************************************** */
static
int
parse_ldconst (arg)
char *arg[]; /* See above */
{
int n; /* Constant to be loaded */
int shift; /* Shift count for "shlo" instruction */
static char buf[5]; /* Literal for first operand */
static char buf2[5]; /* Literal for second operand */
expressionS e; /* Parsed expression */
arg[3] = NULL; /* So we can tell at the end if it got used or not */
switch (parse_expr (arg[1], &e))
{
case SEG_TEXT:
case SEG_DATA:
case SEG_BSS:
case SEG_UNKNOWN:
case SEG_DIFFERENCE:
/* We're dependent on one or more symbols -- use "lda" */
arg[0] = "lda";
break;
case SEG_ABSOLUTE:
/* Try the following mappings:
* ldconst 0,<reg> ->mov 0,<reg>
* ldconst 31,<reg> ->mov 31,<reg>
* ldconst 32,<reg> ->addo 1,31,<reg>
* ldconst 62,<reg> ->addo 31,31,<reg>
* ldconst 64,<reg> ->shlo 8,3,<reg>
* ldconst -1,<reg> ->subo 1,0,<reg>
* ldconst -31,<reg>->subo 31,0,<reg>
*
* anthing else becomes:
* lda xxx,<reg>
*/
n = offs (e);
if ((0 <= n) && (n <= 31))
{
arg[0] = "mov";
}
else if ((-31 <= n) && (n <= -1))
{
arg[0] = "subo";
arg[3] = arg[2];
sprintf (buf, "%d", -n);
arg[1] = buf;
arg[2] = "0";
}
else if ((32 <= n) && (n <= 62))
{
arg[0] = "addo";
arg[3] = arg[2];
arg[1] = "31";
sprintf (buf, "%d", n - 31);
arg[2] = buf;
}
else if ((shift = shift_ok (n)) != 0)
{
arg[0] = "shlo";
arg[3] = arg[2];
sprintf (buf, "%d", shift);
arg[1] = buf;
sprintf (buf2, "%d", n >> shift);
arg[2] = buf2;
}
else
{
arg[0] = "lda";
}
break;
default:
as_bad ("invalid constant");
return -1;
break;
}
return (arg[3] == 0) ? 2 : 3;
}
/*****************************************************************************
* parse_memop: parse a memory operand
*
* This routine is based on the observation that the 4 mode bits of the
* MEMB format, taken individually, have fairly consistent meaning:
*
* M3 (bit 13): 1 if displacement is present (D_BIT)
* M2 (bit 12): 1 for MEMB instructions (MEMB_BIT)
* M1 (bit 11): 1 if index is present (I_BIT)
* M0 (bit 10): 1 if abase is present (A_BIT)
*
* So we parse the memory operand and set bits in the mode as we find
* things. Then at the end, if we go to MEMB format, we need only set
* the MEMB bit (M2) and our mode is built for us.
*
* Unfortunately, I said "fairly consistent". The exceptions:
*
* DBIA
* 0100 Would seem illegal, but means "abase-only".
*
* 0101 Would seem to mean "abase-only" -- it means IP-relative.
* Must be converted to 0100.
*
* 0110 Would seem to mean "index-only", but is reserved.
* We turn on the D bit and provide a 0 displacement.
*
* The other thing to observe is that we parse from the right, peeling
* things * off as we go: first any index spec, then any abase, then
* the displacement.
*
**************************************************************************** */
static
void
parse_memop (memP, argP, optype)
memS *memP; /* Where to put the results */
char *argP; /* Text of the operand to be parsed */
int optype; /* MEM1, MEM2, MEM4, MEM8, MEM12, or MEM16 */
{
char *indexP; /* Pointer to index specification with "[]" removed */
char *p; /* Temp char pointer */
char iprel_flag; /* True if this is an IP-relative operand */
int regnum; /* Register number */
int scale; /* Scale factor: 1,2,4,8, or 16. Later converted
* to internal format (0,1,2,3,4 respectively).
*/
int mode; /* MEMB mode bits */
int *intP; /* Pointer to register number */
/* The following table contains the default scale factors for each
* type of memory instruction. It is accessed using (optype-MEM1)
* as an index -- thus it assumes the 'optype' constants are assigned
* consecutive values, in the order they appear in this table
*/
static int def_scale[] =
{
1, /* MEM1 */
2, /* MEM2 */
4, /* MEM4 */
8, /* MEM8 */
-1, /* MEM12 -- no valid default */
16 /* MEM16 */
};
iprel_flag = mode = 0;
/* Any index present? */
indexP = get_ispec (argP);
if (indexP)
{
p = strchr (indexP, '*');
if (p == NULL)
{
/* No explicit scale -- use default for this
*instruction type.
*/
scale = def_scale[optype - MEM1];
}
else
{
*p++ = '\0'; /* Eliminate '*' */
/* Now indexP->a '\0'-terminated register name,
* and p->a scale factor.
*/
if (!strcmp (p, "16"))
{
scale = 16;
}
else if (strchr ("1248", *p) && (p[1] == '\0'))
{
scale = *p - '0';
}
else
{
scale = -1;
}
}
regnum = get_regnum (indexP); /* Get index reg. # */
if (!IS_RG_REG (regnum))
{
as_bad ("invalid index register");
return;
}
/* Convert scale to its binary encoding */
switch (scale)
{
case 1:
scale = 0 << 7;
break;
case 2:
scale = 1 << 7;
break;
case 4:
scale = 2 << 7;
break;
case 8:
scale = 3 << 7;
break;
case 16:
scale = 4 << 7;
break;
default:
as_bad ("invalid scale factor");
return;
};
memP->opcode |= scale | regnum; /* Set index bits in opcode */
mode |= I_BIT; /* Found a valid index spec */
}
/* Any abase (Register Indirect) specification present? */
if ((p = strrchr (argP, '(')) != NULL)
{
/* "(" is there -- does it start a legal abase spec?
* (If not it could be part of a displacement expression.)
*/
intP = (int *) hash_find (areg_hash, p);
if (intP != NULL)
{
/* Got an abase here */
regnum = *intP;
*p = '\0'; /* discard register spec */
if (regnum == IPREL)
{
/* We have to specialcase ip-rel mode */
iprel_flag = 1;
}
else
{
memP->opcode |= regnum << 14;
mode |= A_BIT;
}
}
}
/* Any expression present? */
memP->e = argP;
if (*argP != '\0')
{
mode |= D_BIT;
}
/* Special-case ip-relative addressing */
if (iprel_flag)
{
if (mode & I_BIT)
{
syntax ();
}
else
{
memP->opcode |= 5 << 10; /* IP-relative mode */
memP->disp = 32;
}
return;
}
/* Handle all other modes */
switch (mode)
{
case D_BIT | A_BIT:
/* Go with MEMA instruction format for now (grow to MEMB later
* if 12 bits is not enough for the displacement).
* MEMA format has a single mode bit: set it to indicate
* that abase is present.
*/
memP->opcode |= MEMA_ABASE;
memP->disp = 12;
break;
case D_BIT:
/* Go with MEMA instruction format for now (grow to MEMB later
* if 12 bits is not enough for the displacement).
*/
memP->disp = 12;
break;
case A_BIT:
/* For some reason, the bit string for this mode is not
* consistent: it should be 0 (exclusive of the MEMB bit),
* so we set it "by hand" here.
*/
memP->opcode |= MEMB_BIT;
break;
case A_BIT | I_BIT:
/* set MEMB bit in mode, and OR in mode bits */
memP->opcode |= mode | MEMB_BIT;
break;
case I_BIT:
/* Treat missing displacement as displacement of 0 */
mode |= D_BIT;
/***********************
* Fall into next case *
********************** */
case D_BIT | A_BIT | I_BIT:
case D_BIT | I_BIT:
/* set MEMB bit in mode, and OR in mode bits */
memP->opcode |= mode | MEMB_BIT;
memP->disp = 32;
break;
default:
syntax ();
break;
}
}
/*****************************************************************************
* parse_po: parse machine-dependent pseudo-op
*
* This is a top-level routine for machine-dependent pseudo-ops. It slurps
* up the rest of the input line, breaks out the individual arguments,
* and dispatches them to the correct handler.
**************************************************************************** */
static
void
parse_po (po_num)
int po_num; /* Pseudo-op number: currently S_LEAFPROC or S_SYSPROC */
{
char *args[4]; /* Pointers operands, with no embedded whitespace.
* arg[0] unused.
* arg[1-3]->operands
*/
int n_ops; /* Number of operands */
char *p; /* Pointer to beginning of unparsed argument string */
char eol; /* Character that indicated end of line */
extern char is_end_of_line[];
/* Advance input pointer to end of line. */
p = input_line_pointer;
while (!is_end_of_line[*input_line_pointer])
{
input_line_pointer++;
}
eol = *input_line_pointer; /* Save end-of-line char */
*input_line_pointer = '\0'; /* Terminate argument list */
/* Parse out operands */
n_ops = get_args (p, args);
if (n_ops == -1)
{
return;
}
/* Dispatch to correct handler */
switch (po_num)
{
case S_SYSPROC:
s_sysproc (n_ops, args);
break;
case S_LEAFPROC:
s_leafproc (n_ops, args);
break;
default:
BAD_CASE (po_num);
break;
}
/* Restore eol, so line numbers get updated correctly. Base assembler
* assumes we leave input pointer pointing at char following the eol.
*/
*input_line_pointer++ = eol;
}
/*****************************************************************************
* parse_regop: parse a register operand.
*
* In case of illegal operand, issue a message and return some valid
* information so instruction processing can continue.
**************************************************************************** */
static
void
parse_regop (regopP, optext, opdesc)
struct regop *regopP; /* Where to put description of register operand */
char *optext; /* Text of operand */
char opdesc; /* Descriptor byte: what's legal for this operand */
{
int n; /* Register number */
expressionS e; /* Parsed expression */
/* See if operand is a register */
n = get_regnum (optext);
if (n >= 0)
{
if (IS_RG_REG (n))
{
/* global or local register */
if (!REG_ALIGN (opdesc, n))
{
as_bad ("unaligned register");
}
regopP->n = n;
regopP->mode = 0;
regopP->special = 0;
return;
}
else if (IS_FP_REG (n) && FP_OK (opdesc))
{
/* Floating point register, and it's allowed */
regopP->n = n - FP0;
regopP->mode = 1;
regopP->special = 0;
return;
}
else if (IS_SF_REG (n) && SFR_OK (opdesc))
{
/* Special-function register, and it's allowed */
regopP->n = n - SF0;
regopP->mode = 0;
regopP->special = 1;
if (!targ_has_sfr (regopP->n))
{
as_bad ("no such sfr in this architecture");
}
return;
}
}
else if (LIT_OK (opdesc))
{
/*
* How about a literal?
*/
regopP->mode = 1;
regopP->special = 0;
if (FP_OK (opdesc))
{ /* floating point literal acceptable */
/* Skip over 0f, 0d, or 0e prefix */
if ((optext[0] == '0')
&& (optext[1] >= 'd')
&& (optext[1] <= 'f'))
{
optext += 2;
}
if (!strcmp (optext, "0.0") || !strcmp (optext, "0"))
{
regopP->n = 0x10;
return;
}
if (!strcmp (optext, "1.0") || !strcmp (optext, "1"))
{
regopP->n = 0x16;
return;
}
}
else
{ /* fixed point literal acceptable */
if ((parse_expr (optext, &e) != SEG_ABSOLUTE)
|| (offs (e) < 0) || (offs (e) > 31))
{
as_bad ("illegal literal");
offs (e) = 0;
}
regopP->n = offs (e);
return;
}
}
/* Nothing worked */
syntax ();
regopP->mode = 0; /* Register r0 is always a good one */
regopP->n = 0;
regopP->special = 0;
} /* parse_regop() */
/*****************************************************************************
* reg_fmt: generate a REG-format instruction
*
**************************************************************************** */
static void
reg_fmt (args, oP)
char *args[]; /* args[0]->opcode mnemonic, args[1-3]->operands */
struct i960_opcode *oP; /* Pointer to description of instruction */
{
long instr; /* Binary to be output */
struct regop regop; /* Description of register operand */
int n_ops; /* Number of operands */
instr = oP->opcode;
n_ops = oP->num_ops;
if (n_ops >= 1)
{
parse_regop (&regop, args[1], oP->operand[0]);
if ((n_ops == 1) && !(instr & M3))
{
/* 1-operand instruction in which the dst field should
* be used (instead of src1).
*/
regop.n <<= 19;
if (regop.special)
{
regop.mode = regop.special;
}
regop.mode <<= 13;
regop.special = 0;
}
else
{
/* regop.n goes in bit 0, needs no shifting */
regop.mode <<= 11;
regop.special <<= 5;
}
instr |= regop.n | regop.mode | regop.special;
}
if (n_ops >= 2)
{
parse_regop (&regop, args[2], oP->operand[1]);
if ((n_ops == 2) && !(instr & M3))
{
/* 2-operand instruction in which the dst field should
* be used instead of src2).
*/
regop.n <<= 19;
if (regop.special)
{
regop.mode = regop.special;
}
regop.mode <<= 13;
regop.special = 0;
}
else
{
regop.n <<= 14;
regop.mode <<= 12;
regop.special <<= 6;
}
instr |= regop.n | regop.mode | regop.special;
}
if (n_ops == 3)
{
parse_regop (&regop, args[3], oP->operand[2]);
if (regop.special)
{
regop.mode = regop.special;
}
instr |= (regop.n <<= 19) | (regop.mode <<= 13);
}
emit (instr);
}
/*****************************************************************************
* relax_cobr:
* Replace cobr instruction in a code fragment with equivalent branch and
* compare instructions, so it can reach beyond a 13-bit displacement.
* Set up an address fix/relocation for the new branch instruction.
*
**************************************************************************** */
/* This "conditional jump" table maps cobr instructions into equivalent
* compare and branch opcodes.
*/
static
struct
{
long compare;
long branch;
}
coj[] =
{ /* COBR OPCODE: */
CHKBIT, BNO, /* 0x30 - bbc */
CMPO, BG, /* 0x31 - cmpobg */
CMPO, BE, /* 0x32 - cmpobe */
CMPO, BGE, /* 0x33 - cmpobge */
CMPO, BL, /* 0x34 - cmpobl */
CMPO, BNE, /* 0x35 - cmpobne */
CMPO, BLE, /* 0x36 - cmpoble */
CHKBIT, BO, /* 0x37 - bbs */
CMPI, BNO, /* 0x38 - cmpibno */
CMPI, BG, /* 0x39 - cmpibg */
CMPI, BE, /* 0x3a - cmpibe */
CMPI, BGE, /* 0x3b - cmpibge */
CMPI, BL, /* 0x3c - cmpibl */
CMPI, BNE, /* 0x3d - cmpibne */
CMPI, BLE, /* 0x3e - cmpible */
CMPI, BO, /* 0x3f - cmpibo */
};
static
void
relax_cobr (fragP)
register fragS *fragP; /* fragP->fr_opcode is assumed to point to
* the cobr instruction, which comes at the
* end of the code fragment.
*/
{
int opcode, src1, src2, m1, s2;
/* Bit fields from cobr instruction */
long bp_bits; /* Branch prediction bits from cobr instruction */
long instr; /* A single i960 instruction */
char *iP; /*->instruction to be replaced */
fixS *fixP; /* Relocation that can be done at assembly time */
/* PICK UP & PARSE COBR INSTRUCTION */
iP = fragP->fr_opcode;
instr = md_chars_to_number (iP, 4);
opcode = ((instr >> 24) & 0xff) - 0x30; /* "-0x30" for table index */
src1 = (instr >> 19) & 0x1f;
m1 = (instr >> 13) & 1;
s2 = instr & 1;
src2 = (instr >> 14) & 0x1f;
bp_bits = instr & BP_MASK;
/* GENERATE AND OUTPUT COMPARE INSTRUCTION */
instr = coj[opcode].compare
| src1 | (m1 << 11) | (s2 << 6) | (src2 << 14);
md_number_to_chars (iP, instr, 4);
/* OUTPUT BRANCH INSTRUCTION */
md_number_to_chars (iP + 4, coj[opcode].branch | bp_bits, 4);
/* SET UP ADDRESS FIXUP/RELOCATION */
fixP = fix_new (fragP,
iP + 4 - fragP->fr_literal,
4,
fragP->fr_symbol,
0,
fragP->fr_offset,
1,
NO_RELOC);
fixP->fx_bit_fixP = (bit_fixS *) 24; /* Store size of bit field */
fragP->fr_fix += 4;
frag_wane (fragP);
}
/*****************************************************************************
* reloc_callj: Relocate a 'callj' instruction
*
* This is a "non-(GNU)-standard" machine-dependent hook. The base
* assembler calls it when it decides it can relocate an address at
* assembly time instead of emitting a relocation directive.
*
* Check to see if the relocation involves a 'callj' instruction to a:
* sysproc: Replace the default 'call' instruction with a 'calls'
* leafproc: Replace the default 'call' instruction with a 'bal'.
* other proc: Do nothing.
*
* See b.out.h for details on the 'n_other' field in a symbol structure.
*
* IMPORTANT!:
* Assumes the caller has already figured out, in the case of a leafproc,
* to use the 'bal' entry point, and has substituted that symbol into the
* passed fixup structure.
*
**************************************************************************** */
void
reloc_callj (fixP)
fixS *fixP; /* Relocation that can be done at assembly time */
{
char *where; /*->the binary for the instruction being relocated */
if (!fixP->fx_callj)
{
return;
} /* This wasn't a callj instruction in the first place */
where = fixP->fx_frag->fr_literal + fixP->fx_where;
if (TC_S_IS_SYSPROC (fixP->fx_addsy))
{
/* Symbol is a .sysproc: replace 'call' with 'calls'.
* System procedure number is (other-1).
*/
md_number_to_chars (where, CALLS | TC_S_GET_SYSPROC (fixP->fx_addsy), 4);
/* Nothing else needs to be done for this instruction.
* Make sure 'md_number_to_field()' will perform a no-op.
*/
fixP->fx_bit_fixP = (bit_fixS *) 1;
}
else if (TC_S_IS_CALLNAME (fixP->fx_addsy))
{
/* Should not happen: see block comment above */
as_fatal ("Trying to 'bal' to %s", S_GET_NAME (fixP->fx_addsy));
}
else if (TC_S_IS_BALNAME (fixP->fx_addsy))
{
/* Replace 'call' with 'bal'; both instructions have
* the same format, so calling code should complete
* relocation as if nothing happened here.
*/
md_number_to_chars (where, BAL, 4);
}
else if (TC_S_IS_BADPROC (fixP->fx_addsy))
{
as_bad ("Looks like a proc, but can't tell what kind.\n");
} /* switch on proc type */
/* else Symbol is neither a sysproc nor a leafproc */
return;
} /* reloc_callj() */
/*****************************************************************************
* s_leafproc: process .leafproc pseudo-op
*
* .leafproc takes two arguments, the second one is optional:
* arg[1]: name of 'call' entry point to leaf procedure
* arg[2]: name of 'bal' entry point to leaf procedure
*
* If the two arguments are identical, or if the second one is missing,
* the first argument is taken to be the 'bal' entry point.
*
* If there are 2 distinct arguments, we must make sure that the 'bal'
* entry point immediately follows the 'call' entry point in the linked
* list of symbols.
*
**************************************************************************** */
static void
s_leafproc (n_ops, args)
int n_ops; /* Number of operands */
char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
{
symbolS *callP; /* Pointer to leafproc 'call' entry point symbol */
symbolS *balP; /* Pointer to leafproc 'bal' entry point symbol */
if ((n_ops != 1) && (n_ops != 2))
{
as_bad ("should have 1 or 2 operands");
return;
} /* Check number of arguments */
/* Find or create symbol for 'call' entry point. */
callP = symbol_find_or_make (args[1]);
if (TC_S_IS_CALLNAME (callP))
{
as_warn ("Redefining leafproc %s", S_GET_NAME (callP));
} /* is leafproc */
/* If that was the only argument, use it as the 'bal' entry point.
* Otherwise, mark it as the 'call' entry point and find or create
* another symbol for the 'bal' entry point.
*/
if ((n_ops == 1) || !strcmp (args[1], args[2]))
{
TC_S_FORCE_TO_BALNAME (callP);
}
else
{
TC_S_FORCE_TO_CALLNAME (callP);
balP = symbol_find_or_make (args[2]);
if (TC_S_IS_CALLNAME (balP))
{
as_warn ("Redefining leafproc %s", S_GET_NAME (balP));
}
TC_S_FORCE_TO_BALNAME (balP);
tc_set_bal_of_call (callP, balP);
} /* if only one arg, or the args are the same */
return;
} /* s_leafproc() */
/*
* s_sysproc: process .sysproc pseudo-op
*
* .sysproc takes two arguments:
* arg[1]: name of entry point to system procedure
* arg[2]: 'entry_num' (index) of system procedure in the range
* [0,31] inclusive.
*
* For [ab].out, we store the 'entrynum' in the 'n_other' field of
* the symbol. Since that entry is normally 0, we bias 'entrynum'
* by adding 1 to it. It must be unbiased before it is used.
*/
static void
s_sysproc (n_ops, args)
int n_ops; /* Number of operands */
char *args[]; /* args[1]->1st operand, args[2]->2nd operand */
{
expressionS exp;
symbolS *symP;
if (n_ops != 2)
{
as_bad ("should have two operands");
return;
} /* bad arg count */
/* Parse "entry_num" argument and check it for validity. */
if ((parse_expr (args[2], &exp) != SEG_ABSOLUTE)
|| (offs (exp) < 0)
|| (offs (exp) > 31))
{
as_bad ("'entry_num' must be absolute number in [0,31]");
return;
}
/* Find/make symbol and stick entry number (biased by +1) into it */
symP = symbol_find_or_make (args[1]);
if (TC_S_IS_SYSPROC (symP))
{
as_warn ("Redefining entrynum for sysproc %s", S_GET_NAME (symP));
} /* redefining */
TC_S_SET_SYSPROC (symP, offs (exp)); /* encode entry number */
TC_S_FORCE_TO_SYSPROC (symP);
return;
} /* s_sysproc() */
/*****************************************************************************
* shift_ok:
* Determine if a "shlo" instruction can be used to implement a "ldconst".
* This means that some number X < 32 can be shifted left to produce the
* constant of interest.
*
* Return the shift count, or 0 if we can't do it.
* Caller calculates X by shifting original constant right 'shift' places.
*
**************************************************************************** */
static
int
shift_ok (n)
int n; /* The constant of interest */
{
int shift; /* The shift count */
if (n <= 0)
{
/* Can't do it for negative numbers */
return 0;
}
/* Shift 'n' right until a 1 is about to be lost */
for (shift = 0; (n & 1) == 0; shift++)
{
n >>= 1;
}
if (n >= 32)
{
return 0;
}
return shift;
}
/*****************************************************************************
* syntax: issue syntax error
*
**************************************************************************** */
static void
syntax ()
{
as_bad ("syntax error");
} /* syntax() */
/*****************************************************************************
* targ_has_sfr:
* Return TRUE iff the target architecture supports the specified
* special-function register (sfr).
*
**************************************************************************** */
static
int
targ_has_sfr (n)
int n; /* Number (0-31) of sfr */
{
switch (architecture)
{
case ARCH_KA:
case ARCH_KB:
case ARCH_MC:
return 0;
case ARCH_CA:
default:
return ((0 <= n) && (n <= 2));
}
}
/*****************************************************************************
* targ_has_iclass:
* Return TRUE iff the target architecture supports the indicated
* class of instructions.
*
**************************************************************************** */
static
int
targ_has_iclass (ic)
int ic; /* Instruction class; one of:
* I_BASE, I_CX, I_DEC, I_KX, I_FP, I_MIL, I_CASIM
*/
{
iclasses_seen |= ic;
switch (architecture)
{
case ARCH_KA:
return ic & (I_BASE | I_KX);
case ARCH_KB:
return ic & (I_BASE | I_KX | I_FP | I_DEC);
case ARCH_MC:
return ic & (I_BASE | I_KX | I_FP | I_DEC | I_MIL);
case ARCH_CA:
return ic & (I_BASE | I_CX | I_CASIM);
default:
if ((iclasses_seen & (I_KX | I_FP | I_DEC | I_MIL))
&& (iclasses_seen & I_CX))
{
as_warn ("architecture of opcode conflicts with that of earlier instruction(s)");
iclasses_seen &= ~ic;
}
return 1;
}
}
/* Parse an operand that is machine-specific.
We just return without modifying the expression if we have nothing
to do. */
/* ARGSUSED */
void
md_operand (expressionP)
expressionS *expressionP;
{
}
/* We have no need to default values of symbols. */
/* ARGSUSED */
symbolS *
md_undefined_symbol (name)
char *name;
{
return 0;
} /* md_undefined_symbol() */
/* Exactly what point is a PC-relative offset relative TO?
On the i960, they're relative to the address of the instruction,
which we have set up as the address of the fixup too. */
long
md_pcrel_from (fixP)
fixS *fixP;
{
return fixP->fx_where + fixP->fx_frag->fr_address;
}
void
md_apply_fix (fixP, val)
fixS *fixP;
long val;
{
char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
if (!fixP->fx_bit_fixP)
{
switch (fixP->fx_im_disp)
{
case 0:
fixP->fx_addnumber = val;
md_number_to_imm (place, val, fixP->fx_size, fixP);
break;
case 1:
md_number_to_disp (place,
fixP->fx_pcrel ? val + fixP->fx_pcrel_adjust : val,
fixP->fx_size);
break;
case 2: /* fix requested for .long .word etc */
md_number_to_chars (place, val, fixP->fx_size);
break;
default:
as_fatal ("Internal error in md_apply_fix() in file \"%s\"", __FILE__);
} /* OVE: maybe one ought to put _imm _disp _chars in one md-func */
}
else
{
md_number_to_field (place, val, fixP->fx_bit_fixP);
}
return;
} /* md_apply_fix() */
#if defined(OBJ_AOUT) | defined(OBJ_BOUT)
void
tc_bout_fix_to_chars (where, fixP, segment_address_in_file)
char *where;
fixS *fixP;
relax_addressT segment_address_in_file;
{
static unsigned char nbytes_r_length[] =
{42, 0, 1, 42, 2};
struct relocation_info ri;
symbolS *symbolP;
/* JF this is for paranoia */
memset ((char *) &ri, '\0', sizeof (ri));
symbolP = fixP->fx_addsy;
know (symbolP != 0 || fixP->fx_r_type != NO_RELOC);
ri.r_bsr = fixP->fx_bsr; /*SAC LD RELAX HACK */
/* These two 'cuz of NS32K */
ri.r_callj = fixP->fx_callj;
if (fixP->fx_bit_fixP)
{
ri.r_length = 2;
}
else
{
ri.r_length = nbytes_r_length[fixP->fx_size];
}
ri.r_pcrel = fixP->fx_pcrel;
ri.r_address = fixP->fx_frag->fr_address + fixP->fx_where - segment_address_in_file;
if (fixP->fx_r_type != NO_RELOC)
{
switch (fixP->fx_r_type)
{
case rs_align:
ri.r_index = -2;
ri.r_pcrel = 1;
ri.r_length = fixP->fx_size - 1;
break;
case rs_org:
ri.r_index = -2;
ri.r_pcrel = 0;
break;
case rs_fill:
ri.r_index = -1;
break;
default:
abort ();
}
ri.r_extern = 0;
}
else if (linkrelax || !S_IS_DEFINED (symbolP))
{
ri.r_extern = 1;
ri.r_index = symbolP->sy_number;
}
else
{
ri.r_extern = 0;
ri.r_index = S_GET_TYPE (symbolP);
}
/* Output the relocation information in machine-dependent form. */
md_ri_to_chars (where, &ri);
return;
} /* tc_bout_fix_to_chars() */
#endif /* OBJ_AOUT or OBJ_BOUT */
/* Align an address by rounding it up to the specified boundary.
*/
long
md_section_align (seg, addr)
segT seg;
long addr; /* Address to be rounded up */
{
return ((addr + (1 << section_alignment[(int) seg]) - 1) & (-1 << section_alignment[(int) seg]));
} /* md_section_align() */
#ifdef OBJ_COFF
void
tc_headers_hook (headers)
object_headers *headers;
{
/* FIXME: remove this line *//* unsigned short arch_flag = 0; */
if (iclasses_seen == I_BASE)
{
headers->filehdr.f_flags |= F_I960CORE;
}
else if (iclasses_seen & I_CX)
{
headers->filehdr.f_flags |= F_I960CA;
}
else if (iclasses_seen & I_MIL)
{
headers->filehdr.f_flags |= F_I960MC;
}
else if (iclasses_seen & (I_DEC | I_FP))
{
headers->filehdr.f_flags |= F_I960KB;
}
else
{
headers->filehdr.f_flags |= F_I960KA;
} /* set arch flag */
if (flagseen['R'])
{
headers->filehdr.f_magic = I960RWMAGIC;
headers->aouthdr.magic = OMAGIC;
}
else
{
headers->filehdr.f_magic = I960ROMAGIC;
headers->aouthdr.magic = NMAGIC;
} /* set magic numbers */
return;
} /* tc_headers_hook() */
#endif /* OBJ_COFF */
/*
* Things going on here:
*
* For bout, We need to assure a couple of simplifying
* assumptions about leafprocs for the linker: the leafproc
* entry symbols will be defined in the same assembly in
* which they're declared with the '.leafproc' directive;
* and if a leafproc has both 'call' and 'bal' entry points
* they are both global or both local.
*
* For coff, the call symbol has a second aux entry that
* contains the bal entry point. The bal symbol becomes a
* label.
*
* For coff representation, the call symbol has a second aux entry that
* contains the bal entry point. The bal symbol becomes a label.
*
*/
void
tc_crawl_symbol_chain (headers)
object_headers *headers;
{
symbolS *symbolP;
for (symbolP = symbol_rootP; symbolP; symbolP = symbol_next (symbolP))
{
#ifdef OBJ_COFF
if (TC_S_IS_SYSPROC (symbolP))
{
/* second aux entry already contains the sysproc number */
S_SET_NUMBER_AUXILIARY (symbolP, 2);
S_SET_STORAGE_CLASS (symbolP, C_SCALL);
S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
continue;
} /* rewrite sysproc */
#endif /* OBJ_COFF */
if (!TC_S_IS_BALNAME (symbolP) && !TC_S_IS_CALLNAME (symbolP))
{
continue;
} /* Not a leafproc symbol */
if (!S_IS_DEFINED (symbolP))
{
as_bad ("leafproc symbol '%s' undefined", S_GET_NAME (symbolP));
} /* undefined leaf */
if (TC_S_IS_CALLNAME (symbolP))
{
symbolS *balP = tc_get_bal_of_call (symbolP);
if (S_IS_EXTERNAL (symbolP) != S_IS_EXTERNAL (balP))
{
S_SET_EXTERNAL (symbolP);
S_SET_EXTERNAL (balP);
as_warn ("Warning: making leafproc entries %s and %s both global\n",
S_GET_NAME (symbolP), S_GET_NAME (balP));
} /* externality mismatch */
} /* if callname */
} /* walk the symbol chain */
return;
} /* tc_crawl_symbol_chain() */
/*
* For aout or bout, the bal immediately follows the call.
*
* For coff, we cheat and store a pointer to the bal symbol
* in the second aux entry of the call.
*/
#undef OBJ_ABOUT
#ifdef OBJ_AOUT
#define OBJ_ABOUT
#endif
#ifdef OBJ_BOUT
#define OBJ_ABOUT
#endif
void
tc_set_bal_of_call (callP, balP)
symbolS *callP;
symbolS *balP;
{
know (TC_S_IS_CALLNAME (callP));
know (TC_S_IS_BALNAME (balP));
#ifdef OBJ_COFF
callP->sy_symbol.ost_auxent[1].x_bal.x_balntry = (int) balP;
S_SET_NUMBER_AUXILIARY (callP, 2);
#else /* ! OBJ_COFF */
#ifdef OBJ_ABOUT
/* If the 'bal' entry doesn't immediately follow the 'call'
* symbol, unlink it from the symbol list and re-insert it.
*/
if (symbol_next (callP) != balP)
{
symbol_remove (balP, &symbol_rootP, &symbol_lastP);
symbol_append (balP, callP, &symbol_rootP, &symbol_lastP);
} /* if not in order */
#else /* ! OBJ_ABOUT */
(as yet unwritten.);
#endif /* ! OBJ_ABOUT */
#endif /* ! OBJ_COFF */
return;
} /* tc_set_bal_of_call() */
char *
_tc_get_bal_of_call (callP)
symbolS *callP;
{
symbolS *retval;
know (TC_S_IS_CALLNAME (callP));
#ifdef OBJ_COFF
retval = (symbolS *) (callP->sy_symbol.ost_auxent[1].x_bal.x_balntry);
#else
#ifdef OBJ_ABOUT
retval = symbol_next (callP);
#else
(as yet unwritten.);
#endif /* ! OBJ_ABOUT */
#endif /* ! OBJ_COFF */
know (TC_S_IS_BALNAME (retval));
return ((char *) retval);
} /* _tc_get_bal_of_call() */
void
tc_coff_symbol_emit_hook (symbolP)
symbolS *symbolP;
{
if (TC_S_IS_CALLNAME (symbolP))
{
#ifdef OBJ_COFF
symbolS *balP = tc_get_bal_of_call (symbolP);
/* second aux entry contains the bal entry point */
/* S_SET_NUMBER_AUXILIARY(symbolP, 2); */
symbolP->sy_symbol.ost_auxent[1].x_bal.x_balntry = S_GET_VALUE (balP);
S_SET_STORAGE_CLASS (symbolP, (!SF_GET_LOCAL (symbolP) ? C_LEAFEXT : C_LEAFSTAT));
S_SET_DATA_TYPE (symbolP, S_GET_DATA_TYPE (symbolP) | (DT_FCN << N_BTSHFT));
/* fix up the bal symbol */
S_SET_STORAGE_CLASS (balP, C_LABEL);
#endif /* OBJ_COFF */
} /* only on calls */
return;
} /* tc_coff_symbol_emit_hook() */
void
i960_handle_align (fragp)
fragS *fragp;
{
fixS *fixp;
segT old_seg = now_seg, this_seg;
int old_subseg = now_subseg;
int pad_size;
extern struct frag *text_last_frag, *data_last_frag;
if (!linkrelax)
return;
/* The text section "ends" with another alignment reloc, to which we
aren't adding padding. */
if (fragp->fr_next == text_last_frag
|| fragp->fr_next == data_last_frag)
{
return;
}
/* alignment directive */
fixp = fix_new (fragp, fragp->fr_fix, fragp->fr_offset, 0, 0, 0, 0,
(int) fragp->fr_type);
}
/*
* Local Variables:
* comment-column: 0
* fill-column: 131
* End:
*/
/* end of tc-i960.c */