mirror of
https://github.com/darlinghq/darling-gdb.git
synced 2025-02-09 18:53:00 +00:00
771c7ce4bc
? gas/testsuite/gas/mips/rol64.s
Index: gas/ChangeLog
===================================================================
RCS file: /cvs/src/src/gas/ChangeLog,v
retrieving revision 1.1334
diff -u -p -r1.1334 ChangeLog
--- gas/ChangeLog 21 May 2002 20:01:51 -0000 1.1334
+++ gas/ChangeLog 21 May 2002 23:32:51 -0000
@@ -1,3 +1,8 @@
+2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (macro2): Add 64 bit drol, dror macros.
+ Optimize the rotate by zero case.
+
2002-05-21 Nick Clifton <nickc@cambridge.redhat.com>
* configure.in: Remove accidental enabling of bfd_gas=yes for
Index: gas/config/tc-mips.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-mips.c,v
retrieving revision 1.123
diff -u -p -r1.123 tc-mips.c
--- gas/config/tc-mips.c 14 May 2002 23:35:59 -0000 1.123
+++ gas/config/tc-mips.c 21 May 2002 23:32:52 -0000
@@ -6686,6 +6686,17 @@ macro2 (ip)
--mips_opts.noreorder;
break;
+ case M_DROL:
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsubu",
+ "d,v,t", AT, 0, treg);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsrlv",
+ "d,t,s", AT, sreg, AT);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsllv",
+ "d,t,s", dreg, sreg, treg);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
+ break;
+
case M_ROL:
macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "subu",
"d,v,t", AT, 0, treg);
@@ -6697,15 +6708,55 @@ macro2 (ip)
"d,v,t", dreg, dreg, AT);
break;
+ case M_DROL_I:
+ {
+ unsigned int rot;
+ char *l, *r;
+
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
+ rot = imm_expr.X_add_number & 0x3f;
+ if (! rot)
+ break;
+ l = (rot < 0x20) ? "dsll" : "dsll32";
+ r = ((0x40 - rot) < 0x20) ? "dsrl" : "dsrl32";
+ rot &= 0x1f;
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, l,
+ "d,w,<", AT, sreg, rot);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, r,
+ "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
+ }
+ break;
+
case M_ROL_I:
- if (imm_expr.X_op != O_constant)
- as_bad (_("rotate count too large"));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", "d,w,<",
- AT, sreg, (int) (imm_expr.X_add_number & 0x1f));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", "d,w,<",
- dreg, sreg, (int) ((0 - imm_expr.X_add_number) & 0x1f));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", "d,v,t",
- dreg, dreg, AT);
+ {
+ unsigned int rot;
+
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
+ rot = imm_expr.X_add_number & 0x1f;
+ if (! rot)
+ break;
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll",
+ "d,w,<", AT, sreg, rot);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl",
+ "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
+ }
+ break;
+
+ case M_DROR:
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsubu",
+ "d,v,t", AT, 0, treg);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsllv",
+ "d,t,s", AT, sreg, AT);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "dsrlv",
+ "d,t,s", dreg, sreg, treg);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
break;
case M_ROR:
@@ -6719,15 +6770,44 @@ macro2 (ip)
"d,v,t", dreg, dreg, AT);
break;
+ case M_DROR_I:
+ {
+ unsigned int rot;
+ char *l, *r;
+
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
+ rot = imm_expr.X_add_number & 0x3f;
+ if (! rot)
+ break;
+ r = (rot < 0x20) ? "dsrl" : "dsrl32";
+ l = ((0x40 - rot) < 0x20) ? "dsll" : "dsll32";
+ rot &= 0x1f;
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, r,
+ "d,w,<", AT, sreg, rot);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, l,
+ "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
+ }
+ break;
+
case M_ROR_I:
- if (imm_expr.X_op != O_constant)
- as_bad (_("rotate count too large"));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl", "d,w,<",
- AT, sreg, (int) (imm_expr.X_add_number & 0x1f));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll", "d,w,<",
- dreg, sreg, (int) ((0 - imm_expr.X_add_number) & 0x1f));
- macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or", "d,v,t",
- dreg, dreg, AT);
+ {
+ unsigned int rot;
+
+ if (imm_expr.X_op != O_constant)
+ as_bad (_("rotate count too large"));
+ rot = imm_expr.X_add_number & 0x1f;
+ if (! rot)
+ break;
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "srl",
+ "d,w,<", AT, sreg, rot);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "sll",
+ "d,w,<", dreg, sreg, (0x20 - rot) & 0x1f);
+ macro_build ((char *) NULL, &icnt, (expressionS *) NULL, "or",
+ "d,v,t", dreg, dreg, AT);
+ }
break;
case M_S_DOB:
Index: gas/testsuite/ChangeLog
===================================================================
RCS file: /cvs/src/src/gas/testsuite/ChangeLog,v
retrieving revision 1.315
diff -u -p -r1.315 ChangeLog
--- gas/testsuite/ChangeLog 20 May 2002 17:05:34 -0000 1.315
+++ gas/testsuite/ChangeLog 21 May 2002 23:32:54 -0000
@@ -1,3 +1,9 @@
+2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * gas/mips/rol64.s: New file, test of drol, dror macros.
+ * gas/mips/rol64.d: Likewise.
+ * gas/mips/mips.exp: Add new test.
+
2002-05-20 Nick Clifton <nickc@cambridge.redhat.com>
* gas/arm/arm.exp: Replace deprecated command line switches
Index: gas/testsuite/gas/mips/mips.exp
===================================================================
RCS file: /cvs/src/src/gas/testsuite/gas/mips/mips.exp,v
retrieving revision 1.32
diff -u -p -r1.32 mips.exp
--- gas/testsuite/gas/mips/mips.exp 4 Apr 2002 08:23:30 -0000 1.32
+++ gas/testsuite/gas/mips/mips.exp 21 May 2002 23:32:54 -0000
@@ -122,6 +122,7 @@ if { [istarget mips*-*-*] } then {
run_dump_test "mul"
}
run_dump_test "rol"
+ run_dump_test "rol64"
if !$aout { run_dump_test "sb" }
run_dump_test "trunc"
if !$aout { run_dump_test "ulh" }
Index: include/opcode/ChangeLog
===================================================================
RCS file: /cvs/src/src/include/opcode/ChangeLog,v
retrieving revision 1.167
diff -u -p -r1.167 ChangeLog
--- include/opcode/ChangeLog 17 May 2002 19:01:03 -0000 1.167
+++ include/opcode/ChangeLog 21 May 2002 23:32:57 -0000
@@ -1,3 +1,7 @@
+2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * mips.h: Add M_DROL, M_DROL_I, M_DROR, M_DROR_I macro cases.
+
2002-05-17 Andrey Volkov <avolkov@sources.redhat.com>
* h8300.h: Corrected defs of all control regs
Index: include/opcode/mips.h
===================================================================
RCS file: /cvs/src/src/include/opcode/mips.h,v
retrieving revision 1.24
diff -u -p -r1.24 mips.h
--- include/opcode/mips.h 16 Mar 2002 03:09:18 -0000 1.24
+++ include/opcode/mips.h 21 May 2002 23:32:57 -0000
@@ -526,9 +526,13 @@ enum
M_REM_3I,
M_REMU_3,
M_REMU_3I,
+ M_DROL,
M_ROL,
+ M_DROL_I,
M_ROL_I,
+ M_DROR,
M_ROR,
+ M_DROR_I,
M_ROR_I,
M_S_DA,
M_S_DOB,
Index: opcodes/ChangeLog
===================================================================
RCS file: /cvs/src/src/opcodes/ChangeLog,v
retrieving revision 1.447
diff -u -p -r1.447 ChangeLog
--- opcodes/ChangeLog 17 May 2002 14:36:45 -0000 1.447
+++ opcodes/ChangeLog 21 May 2002 23:33:00 -0000
@@ -1,3 +1,7 @@
+2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
+
Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com>
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
Index: opcodes/mips-opc.c
===================================================================
RCS file: /cvs/src/src/opcodes/mips-opc.c,v
retrieving revision 1.32
diff -u -p -r1.32 mips-opc.c
--- opcodes/mips-opc.c 17 Mar 2002 02:42:25 -0000 1.32
+++ opcodes/mips-opc.c 21 May 2002 23:33:00 -0000
@@ -492,6 +492,10 @@ const struct mips_opcode mips_builtin_op
{"dremu", "z,s,t", 0x0000001f, 0xfc00ffff, RD_s|RD_t|WR_HILO, I3 },
{"dremu", "d,v,t", 3, (int) M_DREMU_3, INSN_MACRO, I3 },
{"dremu", "d,v,I", 3, (int) M_DREMU_3I, INSN_MACRO, I3 },
+{"drol", "d,v,t", 0, (int) M_DROL, INSN_MACRO, I3 },
+{"drol", "d,v,I", 0, (int) M_DROL_I, INSN_MACRO, I3 },
+{"dror", "d,v,t", 0, (int) M_DROR, INSN_MACRO, I3 },
+{"dror", "d,v,I", 0, (int) M_DROR_I, INSN_MACRO, I3 },
{"dsllv", "d,t,s", 0x00000014, 0xfc0007ff, WR_d|RD_t|RD_s, I3 },
{"dsll32", "d,w,<", 0x0000003c, 0xffe0003f, WR_d|RD_t, I3 },
{"dsll", "d,w,s", 0x00000014, 0xfc0007ff, WR_d|RD_t|RD_s, I3 }, /* dsllv */
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.