darling-gdb/gas/configure.in
Ken Raeburn 420065a54e * configure.in (i386-*-netbsd*): New target, using te-netbsd.h.
(i386-*-netbsd0.8): New target, like 386bsd.

* configure.in: Set BFDDEF in Makefile to "define" or "undef".
* Makefile.in (config.h): Protect against multiple inclusions.  Define or undef
BFD_ASSEMBLER as specified by $(BFDDEF).
(ALL_CFLAGS): Omit $(BFDDEF).
1994-01-13 21:24:27 +00:00

331 lines
8.8 KiB
Plaintext

# This file is configure.in
#
# Copyright (C) 1987-1992 Free Software Foundation, Inc.
#
# This file is part of GAS, the GNU Assembler.
#
# GAS is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GAS is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GAS; see the file COPYING. If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#
# This file was written, and is maintained by K. Richard Pixley
# <rich@cygnus.com>.
# This file is a shell script that supplies the information necessary
# to tailor a template configure script into the configure script
# appropriate for this directory. For more information, check any
# existing configure script.
srctrigger=as.c
srcname="gas"
need_bfd=no
bfd_gas=no
configdirs="doc testsuite"
# per-host:
gas_host=generic
case "${host}" in
a29k-*-*) gas_host=a29k ;;
alpha-*-osf*) gas_host=ansi ;;
hppa*-hp-hpux*) gas_host=hpux ;;
hppa*-hp-bsd*) gas_host=hppabsd ;;
hppa*-hp-osf*) gas_host=hppaosf ;;
i[34]86-ibm-aix*) gas_host=i386aix ;;
i[34]86-*-isc*) gas_host=sysv ;;
i386-sun-sunos*) gas_host=sun386 ;;
m68k-sun-sunos*) gas_host=sun3 ;;
m68*-*-hpux) gas_host=hpux ;;
mips*-dec-ultrix*) gas_host=decstatn ;;
mips*-*-bsd*) gas_host=mipsbsd ;;
mips*-sgi-irix*) gas_host=irix ;;
rs6000-*-*) gas_host=rs6000 ;;
sparc-sun-sunos*) gas_host=sun4 ;;
sparc-sun-solaris2*) gas_host=sysv ;;
vax-*-vms*) gas_host=vms ;;
vax-*-bsd*) gas_host=vax ;;
*-*-sysv4* | *-*-unixware) gas_host=sysv ;;
*-*-ansi | *-*-ultrix | *-*-hpux | *-*-sysv*)
gas_host=${host_os} ;;
esac
if [ ! -r ${srcdir}/config/ho-${gas_host}.h ]; then
echo '*** GAS does not support host' ${host} 1>&2
exit 1
fi
# per-target:
case ${with_bfd_assembler} in
yes)
echo "*** Warning: GAS BFD configuration option not yet fully supported" 1>&2
need_bfd=yes
bfd_gas=yes
;;
no | "")
;;
*)
echo "*** Bad value \"${with_bfd_assembler}\" for --with-bfd-assembler option" 1>&2
exit 1
;;
esac
# assign cpu type
emulation=generic
# default is big
endian=big
# check for architecture variants
case ${target_cpu} in
# Actually we've only got support for the 1.1, so we shouldn't generalize,
# but this is what the support files are named...
hppa*) cpu_type=hppa ;;
i486) cpu_type=i386 ;;
m680[01234]0) cpu_type=m68k ;;
m68008) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
m8*) cpu_type=m88k ;;
mips*el) cpu_type=mips endian=little;;
mips*) cpu_type=mips ;;
sparc64) cpu_type=sparc64 obj_format=elf ;; # v9
sparclite*) cpu_type=sparc ;;
*) cpu_type=${target_cpu} ;;
esac
gas_target=${cpu_type}
generic_target=${cpu_type}-${target_vendor}-${target_os}
dev=no
# assign object format
case ${generic_target} in
a29k-amd-udi) obj_format=coffbfd gas_target=ebmon29k ;;
a29k-amd-ebmon) obj_format=coffbfd gas_target=ebmon29k ;;
a29k-amd-ebmonold) obj_format=coff gas_target=ebmon29k ;;
alpha-*-osf*) obj_format=ecoff dev=yes ;;
hppa-*-osf) obj_format=elf emulation=hppa ;;
hppa-*-hpux*) obj_format=som emulation=hppa ;;
hppa-*-bsd*) obj_format=som emulation=hppa ;;
h8300-*-coff) obj_format=coffbfd ;;
i386-ibm-aix*) obj_format=coffbfd gas_target=i386coff
emulation=i386aix ;;
i386-*-bsd*) obj_format=aout emulation=386bsd ;;
i386-*-netbsd0.8) obj_format=aout emulation=netbsd ;;
i386-*-netbsd*) obj_format=aout emulation=netbsd ;;
i386-*-linux*elf*) obj_format=elf emulation=linux ;;
i386-*-linux*coff*) obj_format=coffbfd emulation=linux
gas_target=i386coff ;;
i386-*-linux*) obj_format=aout emulation=linux ;;
i386-*-lynxos*) obj_format=coffbfd gas_target=i386coff
emulation=lynx ;;
i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
obj_format=elf ;;
i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
obj_format=coffbfd gas_target=i386coff ;;
i386-*-vsta) obj_format=aout ;;
i386-*-go32) obj_format=aout ;;
i960-wrs-vxworks | i960-*-nindy*)
obj_format=bout ;;
i960-*-coff) obj_format=coff emulation=ic960 ;;
m68k-wrs-vxworks | m68k-ericsson-ose | m68k-*-sunos*)
obj_format=aout emulation=sun3 ;;
m68k-*-coff | m68k-*-sysv*)
obj_format=coffbfd gas_target=m68kcoff ;;
m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
m68k-*-lynxos*) obj_format=coffbfd gas_target=m68kcoff
emulation=lynx ;;
m88k-*-coff*) obj_format=coffbfd gas_target=m88kcoff ;;
# don't change emulation like *-*-bsd does
mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
mips-*-ecoff*) obj_format=ecoff
if [ $endian = big ] ; then
gas_target=mips-big
else
gas_target=mips-lit
fi
;;
mips-*-ecoff*) obj_format=ecoff gas_target=mips-big ;;
mips-*-irix5*) obj_format=elf gas_target=mips-big ;;
mips-*-irix*) obj_format=ecoff gas_target=mips-big emulation=irix ;;
mips-*-riscos*) obj_format=ecoff gas_target=mips-big ;;
mips-*-sysv*) obj_format=ecoff gas_target=mips-big ;;
mips-*-elf*) obj_format=elf
if [ $endian = big ] ; then
gas_target=mips-big
else
gas_target=mips-lit
fi
;;
sh-*-coff) obj_format=coffbfd ;;
sparc*-*-sunos4*) obj_format=aout emulation=sun3 bfd_gas=yes ;;
sparc*-*-aout | sparc*-*-vxworks)
obj_format=aout bfd_gas=yes ;;
sparc*-*-coff) obj_format=coff bfd_gas=yes ;;
sparc*-*-lynxos) obj_format=coff bfd_gas=yes ;;
sparc*-fujitsu-none) obj_format=aout bfd_gas=yes ;;
sparc*-*-elf | sparc*-*-solaris*)
obj_format=elf ;;
sparc64-*-aout*) obj_format=aout bfd_gas=yes ;; # v9
vax-*-vms) obj_format=vms ;;
z8k-*-coff | z8k-*-sim)
obj_format=coffbfd ;;
*-*-aout | *-*-scout)
obj_format=aout ;;
*-*-nindy*)
obj_format=bout ;;
*-*-bsd*)
obj_format=aout emulation=sun3 ;;
*-*-generic) obj_format=generic ;;
*-*-xray | *-*-hms) obj_format=coffbfd ;;
*-*-sysv32) obj_format=coff emulation=sysv32 ;;
*-*-sim) obj_format=coffbfd ;;
*-*-elf | *-*-sysv4* | *-*-solaris*)
echo '*** Warning: GAS support for ELF format is incomplete' 1>&2
obj_format=elf dev=yes ;;
*-*-coff* | *-sysv* | *-*-sco*)
obj_format=coff
case ${target_vendor} in
bull) emulation=dpx2 ;;
sun) emulation=sun3 ;;
esac
;;
*-*-vxworks) obj_format=aout ;;
*-*-netware) obj_format=elf ;;
esac
# Assign floating point type. Most processors with FP support
# IEEE FP. On those that don't support FP at all, usually IEEE
# is emulated.
case ${target_cpu} in
ns32k | vax | tahoe ) atof=${target_cpu} ;;
*) atof=ieee ;;
esac
if [ ! -r ${srcdir}/config/tc-${cpu_type}.c ]; then
echo '*** GAS does not support target CPU' ${cpu_type} 1>&2
exit 1
fi
case "${obj_format}" in
"")
echo "*** GAS doesn't know what format to use for target" ${target} 1>&2
exit 1
;;
esac
if [ ! -r ${srcdir}/config/obj-${obj_format}.c ]; then
echo '*** GAS does not have support for object file format' ${obj_format} 1>&2
exit 1
fi
# and target makefile frag
target_makefile_frag=config/${gas_target}.mt
case ${bfd_gas}-${obj_format} in
yes-coffbfd) obj_format=coff ;;
no-coffbfd) need_bfd=yes ;;
*-elf) bfd_gas=yes ;;
*-ecoff) bfd_gas=yes ;;
*-som) bfd_gas=yes ;;
*) ;;
esac
case ${with_bfd_assembler}-${bfd_gas} in
yes-yes | no-no)
# We didn't override user's choice.
;;
no-yes)
echo '*** Use of BFD is required for ${target}; overriding config options'\
1>&2
;;
no-preferred)
bfd_gas=no
;;
*-preferred)
bfd_gas=yes
;;
-*)
# User specified nothing.
;;
esac
reject_dev_configs=no
case ${reject_dev_configs}-${dev} in
yes-yes) # Oops.
echo "*** GAS does not support the ${generic_target} configuration" 1>&2
exit 1
;;
esac
files="config/ho-${gas_host}.h config/tc-${cpu_type}.c \
config/tc-${cpu_type}.h config/te-${emulation}.h \
config/obj-${obj_format}.h config/obj-${obj_format}.c \
config/atof-${atof}.c"
links="host.h targ-cpu.c targ-cpu.h targ-env.h obj-format.h obj-format.c atof-targ.c"
# post-target:
case ${bfd_gas} in
yes) bfddef="BFDDEF=define" need_bfd=yes ;;
*) bfddef="BFDDEF=undef" ;;
esac
case ${need_bfd} in
yes) bfdlib="BFDLIB=../bfd/libbfd.a" ;;
*) bfdlib="" ;;
esac
case "x${host}" in
"x${target}") cross="" ;;
*) cross="CROSS=-DCROSS_COMPILE" ;;
esac
rm -f Makefile.tem
echo $bfddef > Makefile.tem
echo $bfdlib >> Makefile.tem
echo $cross >> Makefile.tem
cat Makefile >> Makefile.tem
mv -f Makefile.tem Makefile
# end of gas/configure.in