darling-gdb/gdb/doc/Makefile.in
Ian Lance Taylor f930354afe * Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
$(srcdir).
	(gdb-config.texi): Depend on file in $(srcdir).
1993-04-05 16:07:40 +00:00

311 lines
9.7 KiB
Makefile

##Copyright (C) 1991, 1992 Free Software Foundation, Inc.
# Makefile for GDB documentation.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
srcdir = .
prefix = /usr/local
infodir = $(prefix)/info
SHELL = /bin/sh
INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
# main GDB source directory
gdbdir = $(srcdir)/..
# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# where to find texi2roff, ditto
TEXI2ROFF=texi2roff
# Where is the source dir for the READLINE library doc?
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc
SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
DOC_CONFIG = all
# Don Knuth's TeX formatter
TEX = tex
# auxiliary program for sorting Texinfo indices
TEXINDEX = texindex
# Main GDB manual's source files
SFILES_INCLUDED = gdb-config.texi $(srcdir)/gdbinv-s.texi
SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
SFILES_DOC = $(SFILES_LOCAL) \
$(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
#### Host, target, and site specific Makefile fragments come in here.
###
all install:
info: gdb.info gdbint.info stabs.info
dvi: gdb.dvi refcard.dvi gdbint.dvi
all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
install-info: info
-parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
-if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
for i in *.info* ; do \
$(INSTALL_DATA) $$i $(infodir)/$$i ; \
done
STAGESTUFF = *.info* gdb-all.texi GDBvn.texi
# Copy the object files from a particular stage into a subdirectory.
stage1: force
-mkdir stage1
-mv $(STAGESTUFF) stage1
stage2: force
-mkdir stage2
-mv $(STAGESTUFF) stage2
stage3: force
-mkdir stage3
-mv $(STAGESTUFF) stage3
against=stage2
comparison: force
for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
de-stage1: force
-(cd stage1 ; mv -f * ..)
-rmdir stage1
de-stage2: force
-(cd stage2 ; mv -f * ..)
-rmdir stage2
de-stage3: force
-(cd stage3 ; mv -f * ..)
-rmdir stage3
clean-info:
rm -f gdb.info* gdbint.info* stabs.info*
clean-dvi:
rm -f gdb.dvi refcard.dvi gdbint.dvi stabs.dvi psref.dvi
mostlyclean: clean-info clean-dvi
rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
rm -f links2roff
rm -f refcard.ps lrefcard.ps refcard.log psref.* *~
rm -f gdbint.?? gdbint.??? stabs.?? stabs.???
clean: mostlyclean
rm -f GDBvn.texi rluser.texinfo inc-hist.texi
distclean: clean
rm -f Makefile config.status
realclean: distclean
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
refcard.dvi : $(srcdir)/refcard.tex
$(SET_TEXINPUTS) $(TEX) refcard.tex; rm -f refcard.log
rm -f rcfonts.tex
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
refcard.ps : $(srcdir)/refcard.tex $(srcdir)/psrc.sed
sed -f $(srcdir)/psrc.sed $(srcdir)/refcard.tex >psref.tex
$(SET_TEXINPUTS) $(TEX) psref.tex
dvips -t landscape psref -o; mv psref.ps refcard.ps
rm -f psref.dvi psref.log psref.tex
# GDB QUICK REFERENCE (PostScript output, common PS fonts w/long names)
lrefcard.ps : $(srcdir)/refcard.tex $(srcdir)/lpsrc.sed
sed -f $(srcdir)/lpsrc.sed $(srcdir)/refcard.tex >psref.tex
$(SET_TEXINPUTS) $(TEX) psref.tex
dvips -t landscape psref -o; mv psref.ps lrefcard.ps
rm -f psref.dvi psref.log psref.tex
# File to record current GDB version number (copied from main dir Makefile.in)
GDBvn.texi : ${gdbdir}/Makefile.in
echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.texi
# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-config.texi: ${srcdir}/${DOC_CONFIG}-config.texi
ln -s ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
ln ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi || \
cp ${srcdir}/${DOC_CONFIG}-config.texi gdb-config.texi
# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
# Note that we can *generate* GDBvn.texi, but since we distribute one in the
# source directory for the benefit of people who *don't* use this makefile,
# VPATH will often tell make not to bother building it, because the one
# in the srcdir is up to date. (if not, then make should build one here).
# GDB MANUAL: TeX dvi file
gdb.dvi: ${SFILES_DOC}
if [ ! -f ./GDBvn.texi ]; then \
ln -s $(srcdir)/GDBvn.texi . || \
ln $(srcdir)/GDBvn.texi . || \
cp $(srcdir)/GDBvn.texi . ; else true; fi
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
$(TEXINDEX) gdb.??
$(SET_TEXINPUTS) $(TEX) gdb.texinfo
rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s
# GDB MANUAL: info file
# We're using texinfo2, and older makeinfo's may not be able to
# cope with all the markup.
gdb.info: ${SFILES_DOC}
$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
# GDB MANUAL: roff translations
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
# corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
# texi2roff doesn't have a notion of include dirs, so we have to fake
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(SFILES_INCLUDED)
if [ ! -f gdb.texinfo ]; then \
ln -s $(SFILES_INCLUDED) . || \
ln $(SFILES_INCLUDED) . || \
cp $(SFILES_INCLUDED) . ; \
fi
touch links2roff
# "Readline" appendices. Get them also due to lack of includes,
# regardless of whether or not configuring in main sourcedir.
# @ftable removed due to bug in texi2roff-2; if your texi2roff
# is newer, try just ln or cp
rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
sed -e 's/^@ftable/@table/g' \
-e 's/^@end ftable/@end table/g' \
${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
ln -s ${READLINE_DIR}/inc-hist.texi . || \
ln ${READLINE_DIR}/inc-hist.texi . || \
cp ${READLINE_DIR}/inc-hist.texi .
# gdb manual suitable for [gtn]roff -me
gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -me | \
sed -e 's/---/\\(em/g' \
>gdb.me
# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -ms | \
sed -e 's/---/\\(em/g' \
>gdb.ms
# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
# try leaving them in
gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
>gdb.mm
# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
$(TEXINDEX) gdbint.??
$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs
# GDB INTERNALS MANUAL: info file
gdb-internals: gdbint.info
gdbint.info: gdbint.texinfo
$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
stabs.info: stabs.texinfo
$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : stabs.texinfo
$(SET_TEXINPUTS) $(TEX) stabs.texinfo
$(TEXINDEX) stabs.??
$(SET_TEXINPUTS) $(TEX) stabs.texinfo
rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs
stabs.ps: stabs.dvi
dvips -o stabs.ps stabs
force:
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status