darlinghq/darling-gdb
1
0
Fork 0
mirror of https://github.com/darlinghq/darling-gdb.git synced 2024-11-28 14:30:48 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
9e9617a51f
darling-gdb/gdb/testsuite/gdb.trace/tfind.exp
Jim Blandy f0a847b8c7 * gdb.trace/tfind.exp: Pass '-O1' flag via the 'optimize' option, 
rather than as part of the output file name.
2002-12-23 00:02:02 +00:00

411 lines
13 KiB
Plaintext
Raw Blame History

# Copyright 1998 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Michael Snyder (msnyder@cygnus.com)
load_lib "trace-support.exp";
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
gdb_exit
gdb_start
if [istarget "m68k-*-elf"] then {
load_lib "emc-support.exp";
set srcfile gdb_c_test.c
set binfile [board_info target d490_binfile];
gdb_test "set remotetimeout 6" "" ""
set timeout 500
gdb_target_monitor $binfile
# Give a TSTOP and ignore errors, to make sure any previous trace is off
gdb_test "tstop" "" ""
gdb_test "tfind none" "" ""
send_gdb "compare-sections CS\n"
gdb_expect {
-re "MIS-MATCHED.*$gdb_prompt $" {
gdb_suppress_entire_file "Symbol file does not match target!
all tests in this module will fail.";
}
-re ".*$gdb_prompt $" { }
}
} else {
set testfile "actions"
set srcfile ${testfile}.c
set binfile $objdir/$subdir/$testfile
# Why does this test require '-O1' level optimization? (In
# general, the optimization level should be left under the control
# of the test framework (target_list and so on), so if we don't
# have to override it in individual tests like this, we shouldn't.)
if { [gdb_compile "$srcdir/$subdir/$srcfile" "$binfile" \
executable {debug additional_flags=-w optimize=-O1}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
gdb_load $binfile
gdb_test "tstop" "" ""
gdb_test "tfind none" "" ""
runto_main
}
gdb_reinitialize_dir $srcdir/$subdir
# We generously give ourselves one "pass" if we successfully
# detect that this test cannot be run on this target!
if { ![gdb_target_supports_trace] } then {
pass "Current target does not supporst trace"
return 1;
}
# If testing on a remote host, download the source file.
# remote_download host $srcdir/$subdir/$srcfile
# define relative source line numbers:
# all subsequent line numbers are relative to this first one (baseline)
set baseline [gdb_find_recursion_test_baseline $srcfile];
if { $baseline == -1 } then {
fail "Could not find gdb_recursion_test function"
return;
}
set testline1 [expr $baseline + 1]
set testline2 [expr $baseline + 5]
set testline3 [expr $baseline + 6]
set testline4 [expr $baseline + 7]
set testline5 [expr $baseline + 8]
#
# test tfind command
#
gdb_delete_tracepoints
set tdp1 [gdb_gettpnum "\*gdb_recursion_test"]
set tdp2 [gdb_gettpnum $testline2]
set tdp3 [gdb_gettpnum $testline3]
set tdp4 [gdb_gettpnum $testline4]
set tdp5 [gdb_gettpnum $testline5]
if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \
$tdp4 <= 0 || $tdp5 <= 0 } then {
fail "setting tracepoints"
return;
}
# 6.1 test tstart command
send_gdb "tstart\n"
gdb_expect {
-re "Trace can only be run on remote targets.*$gdb_prompt $" {
fail "6.1: tstart (not connected to remote?)"
return;
}
-re "Target does not support this command.*$gdb_prompt $" {
fail "6.1: tstart (connected to wrong target?)"
return;
}
-re "Target returns error code.*$gdb_prompt $" {
fail "6.1: tstart (connected to wrong target?)"
return;
}
-re "$gdb_prompt $" {
pass "6.1: tstart"
}
default {
fail "6.1: tstart (default)"
return;
}
}
# test tstatus (when trace on)
gdb_test "tstatus" "\[Tt\]race is running.*" "test tstatus on"
# 6.2 test help tstart
gdb_test "help tstart" "Start trace data collection." "6.2: help tstart"
if [istarget "m68k-*-elf"] then {
gdb_emclaptop_command "85,1,2,3,4,5,6"
sleep 5
gdb_emclaptop_command "85,7,8,9,A,B,C"
sleep 5
} else {
gdb_test "break end" "" ""
gdb_test "continue" \
"Continuing.*Breakpoint $decimal, end.*" \
"run trace experiment"
}
# 7.1 test tstop command
send_gdb "tstop\n"
gdb_expect {
-re "Trace can only be run on remote targets.*$gdb_prompt $" {
fail "7.1: tstop (not connected to remote?)"
return;
}
-re "Target does not support this command.*$gdb_prompt $" {
fail "7.1: tstop (connected to wrong target?)"
return;
}
-re "Target returns error code.*$gdb_prompt $" {
fail "7.1: tstop (connected to wrong target?)"
return;
}
-re "$gdb_prompt $" {
pass "7.1: tstop"
}
default {
fail "7.1: tstop (default)"
return;
}
}
# 7.2 test help tstop
gdb_test "help tstop" "Stop trace data collection." "7.2: help tstop"
# test tstatus (when trace off)
gdb_test "tstatus" "\[Tt\]race.* not running.*" "test tstatus off"
## record starting PC
set save_pc [gdb_readexpr "(unsigned long) \$pc"];
if { $save_pc == -1 } then {
fail "could not read PC"
return;
}
# 8.7 tfind start
## check $trace_frame == 0
gdb_tfind_test "8.7: tfind start command" "start" "0";
## check $pc != startPC
gdb_test "printf \"x \%d x\\n\", \$pc != $save_pc" \
"x 1 x" \
"8.7b: tfind start"
# 8.8 tfind none
## check $trace_frame == -1
gdb_tfind_test "8.8: tfind none" "none" "-1";
## check $pc == startPC
gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
"x 1 x" \
"8.8b: tfind none (restores non-trace PC)"
# 8.9 tfind end
## check $trace_frame == -1
gdb_tfind_test "8.9: tfind end, selects no frame" "end" "-1";
## check $pc == startPC
gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
"x 1 x" \
"8.9b: tfind end (restores non-tracing PC)"
# 8.1 tfind n
## check $trace_frame == n
gdb_tfind_test "8.1: tfind 1" "1" "1"
## check $trace_line corresponds to tracepoint for frame n
gdb_test "print \$trace_line" "$testline2" "8.1b: tfind 1 (correct line)"
# 8.28 tfind invalid n (big number)
## check "not found" error
## check $trace_frame != n
gdb_test "tfind 32767" \
"failed to find.*" \
"8.28: tfind <n> command rejects invalid frame number"
gdb_test "printf \"x \%d x\\n\", \$trace_frame == 32767" \
"x 0 x" \
"8.28: tfind <n> rejected bad input (32767)"
# 8.31 tfind negative n
## check error
gdb_test "tfind -3" "invalid input.*" "8.31: tfind <n> rejects negative input"
## check $trace_frame != -n
gdb_test "printf \"x \%d x\\n\", \$trace_frame == -3" "x 0 x" \
"8.31: tfind <n> rejected negative input (-3)"
# 8.10 tfind <no arg>
## check $trace_frame += 1
gdb_tfind_test "8.10: tfind start" "start" "0";
gdb_test "print \$trace_line" "$baseline" \
"8.10: tfind 0 (correct line $baseline)"
gdb_tfind_test "8.10: tfind noargument 1" "" "1";
gdb_test "print \$trace_line" "$testline2" \
"8.10: tfind 1 (correct line $testline2)"
gdb_tfind_test "8.10: tfind noargument 2" "" "2";
gdb_test "print \$trace_line" "$testline3" \
"8.10: tfind 2 (correct line $testline3)"
gdb_tfind_test "8.10: tfind noargument 3" "" "3";
gdb_test "print \$trace_line" "$testline4" \
"8.10: tfind 3 (correct line $testline4)"
gdb_tfind_test "8.11: tfind 3" "3" "3";
gdb_test "print \$trace_line" "$testline4" \
"8.11: tfind 3 (correct line $testline4)"
gdb_tfind_test "8.11: tfind backward 2" "-" "2";
gdb_test "print \$trace_line" "$testline3" \
"8.11: tfind 2 (correct line $testline3)"
gdb_tfind_test "8.11: tfind backward 1" "-" "1";
gdb_test "print \$trace_line" "$testline2" \
"8.11: tfind 1 (correct line $testline2)"
gdb_tfind_test "8.11: tfind backward 0" "-" "0";
gdb_test "print \$trace_line" "$baseline" \
"8.11: tfind 0 (correct line $baseline)"
gdb_tfind_test "8.12: tfind none" "none" "-1";
gdb_tfind_test "8.12: tfind tracepoint <n>" "tracepoint $tdp2" \
"\$tracepoint" "$tdp2";
gdb_test "print \$trace_line" "$testline2" \
"8.12: tfind tracepoint <n> (line $testline2)"
gdb_tfind_test "8.25: tfind none" "none" "-1";
gdb_test "tfind tracepoint 0" "failed to find.*" \
"8.25: tfind tracepoint rejects zero"
gdb_test "tfind tracepoint 32767" "failed to find.*" \
"8.25: tfind tracepoint rejects nonexistant tracepoint (32767)"
gdb_test "tfind tracepoint -1" "failed to find.*" \
"8.25: tfind tracepoint rejects nonexistant tracepoint (-1)"
# 8.37 tfind tracepoint n where n no longer exists (but used to)
gdb_test "delete trace $tdp2" "" ""
gdb_tfind_test "8.37: tfind none" "none" "-1";
gdb_tfind_test "8.37: tfind deleted tracepoint" \
"tracepoint $tdp2" \
"\$tracepoint" "$tdp2";
gdb_test "print \$trace_line" "$testline2" \
"8.37: tfind deleted tracepoint (line $testline2)"
# 8.13 tfind tracepoint <no arg>
## check $tracepoint same before and after, $trace_frame changed
gdb_tfind_test "8.13: tfind none" "none" "-1";
gdb_tfind_test "8.13: tracepoint $tdp1" "tracepoint $tdp1" \
"\$tracepoint" "$tdp1";
gdb_test "print \$trace_line" "$baseline" \
"8.13: tfind tracepoint $tdp1 (line $baseline)"
gdb_test "set \$save_frame = \$trace_frame" "" ""
gdb_tfind_test "8.13: tracepoint <no arg>" "tracepoint" \
"\$tracepoint" "$tdp1";
gdb_test "printf \"x \%d x\\n\", \$trace_frame == \$save_frame" \
"x 0 x" \
"8.13: tracepoint <no arg>, tracepoint number unchanged"]
# 1.12 set tracepoint in prologue
#
# tdp1 was set at *gdb_recursion_test (ie. the hard address of the
# function, before the prologue). Test to see that it succeeded.
# Current pc should be equal to the address of the function.
gdb_test "printf \"x \%d x\\n\", \$pc == gdb_recursion_test" \
"x 1 x" \
"1.12: set tracepoint in prologue"
# 8.14 tfind pc x
## check pc == x, $trace_frame != -1
gdb_tfind_test "8.14: tfind 3" "3" "3"
gdb_test "print \$trace_line" "$testline4" \
"8.14: tfind 3 (line $testline4)"
gdb_test "set \$test_pc = \$pc" "" ""
gdb_tfind_test "8.14: tfind none" "none" "-1"
gdb_tfind_test "8.14: tfind pc" "pc \$test_pc" "\$trace_frame != -1" "1";
gdb_test "print \$trace_line" "$testline4" \
"8.14: tfind pc x (line $testline4)"
gdb_test "printf \"x \%d x\\n\", \$pc == \$test_pc" \
"x 1 x" \
"8.14: tfind pc x"
# 8.15 tfind pc <no arg>
## check pc same before and after, $trace_frame changed
gdb_tfind_test "8.15: tfind 3" "3" "3"
gdb_test "print \$trace_line" "$testline4" \
"8.15: tfind 3 (line $testline4)"
gdb_test "set \$test_pc = \$pc" "" ""
gdb_tfind_test "8.15: tfind pc" "pc" "\$pc == \$test_pc" "1"
gdb_test "print \$trace_line" "$testline4" \
"8.15: tfind pc (line $testline4)"
gdb_test "printf \"x \%d x\\n\", \$trace_frame != 3" "x 1 x" \
"8.15: trace frame didn't change"
# 8.26 tfind pc invalid x
## check error, pc != x (trace_frame unchanged?)
gdb_tfind_test "8.26: tfind start" "start" "0"
gdb_test "tfind pc 0" "failed to find.*" "8.26: tfind pc zero"
gdb_test "tfind pc -1" "failed to find.*" "8.26: tfind pc -1"
# 8.16 tfind line n
## check #trace_frame != -1, $trace_line == n
gdb_tfind_test "8.16: tfind none" "none" "-1"
gdb_tfind_test "8.16: tfind line $testline3" \
"line $testline3" \
"\$trace_line == $testline3" "1"
# 8.17 tfind line <no arg> (# 8.19, 8.20)
## check $trace_line changed, no error, pc changed, frame changed, tdp changed
gdb_tfind_test "8.17: tfind none" "none" "-1"
gdb_tfind_test "8.17: tfind line $testline3" "line $testline3" "\$trace_line == $testline3" "1"
gdb_tfind_test "8.17: tfind line <no arg>" "line" "\$trace_line != $testline3" "1"
# 8.36 tfind and disassembly
gdb_tfind_test "8.36: tfind start" "start" "0"
set timeout 60
send_gdb "disassemble gdb_c_test\n"
# look for disassembly of function label
gdb_expect {
-re "<gdb_c_test>:.*$gdb_prompt $" { pass "8.36: trace disassembly" }
-re ".*$gdb_prompt $" { fail "8.36: trace disassembly" }
timeout { fail "8.36: trace disassembly (timeout)" }
}
gdb_test "tfind line 0" \
"out of range.*|failed to find.*" \
"8.18: tfind line 0";
gdb_test "tfind line 32767" \
"out of range.*|failed to find.*" \
"8.27: tfind line 32767";
gdb_test "tfind line NoSuChFiLe.c:$baseline" \
"No source file named.*" \
"8.27: tfind line in bad source file";
# 8.32 tfind invalid subcommand (tfind foo)
## check error
gdb_test "tfind NoSuChOpTiOn 21" \
"No symbol.*|\[Ww\]arning.*|\[Ee\]rror.*" \
"8.32: tfind with bad subcommand"
# 8.38 test help tfind
gdb_test "help tfind" "Select a trace frame.*" \
"8.38: help tfind"
gdb_test "help tfind pc" "Select a trace frame by PC.*" \
"8.38: help tfind PC"
gdb_test "help tfind end" "Synonym for 'none'.*" \
"8.38: help tfind end"
gdb_test "help tfind none" "De-select any trace frame.*" \
"8.38: help tfind none"
gdb_test "help tfind line" "Select a trace frame by source line.*" \
"8.38: help tfind line"
gdb_test "help tfind start" "Select the first trace frame.*" \
"8.38: help tfind start"
gdb_test "help tfind range" "Select a trace frame whose PC is in.*" \
"8.38: help tfind range"
gdb_test "help tfind trace" "Select a trace frame by tracepoint number.*" \
"8.38: help tfind tracepoint"
# Finished!
gdb_tfind_test "8.17: tfind none" "none" "-1"
Reference in New Issue View Git Blame Copy Permalink