darling-gdb/gdb/core.c
1991-04-23 02:19:43 +00:00

462 lines
12 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Work with core dump and executable files, for GDB.
Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
This file is part of GDB.
GDB is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GDB is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GDB; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#include <stdio.h>
#include <errno.h>
#include <signal.h>
#include "defs.h"
#include "param.h"
#include "frame.h" /* required by inferior.h */
#include "inferior.h"
#include "symtab.h"
#include "command.h"
#include "bfd.h"
#include "target.h"
#include "gdbcore.h"
extern int xfer_memory ();
extern void child_attach (), child_create_inferior ();
extern int sys_nerr;
extern char *sys_errlist[];
extern char *sys_siglist[];
extern char registers[];
/* Hook for `exec_file_command' command to call. */
void (*exec_file_display_hook) () = NULL;
struct section_table *core_sections, *core_sections_end;
/* Binary file diddling handle for the core file. */
bfd *core_bfd = NULL;
/* Forward decl */
extern struct target_ops core_ops;
/* Discard all vestiges of any previous core file
and mark data and stack spaces as empty. */
void
core_close (quitting)
int quitting;
{
if (core_bfd) {
free (bfd_get_filename (core_bfd));
bfd_close (core_bfd);
core_bfd = NULL;
#ifdef CLEAR_SOLIB
CLEAR_SOLIB ();
#endif
}
}
/* This routine opens and sets up the core file bfd */
void
core_open (filename, from_tty)
char *filename;
int from_tty;
{
char *p;
int siggy;
struct cleanup *old_chain;
char *temp;
bfd *temp_bfd;
int ontop;
target_preopen (from_tty);
if (!filename)
{
error (core_bfd?
"No core file specified. (Use `detach' to stop debugging a core file.)"
: "No core file specified.");
}
filename = tilde_expand (filename);
if (filename[0] != '/') {
temp = concat (current_directory, "/", filename);
free (filename);
filename = temp;
}
old_chain = make_cleanup (free, filename);
temp_bfd = bfd_openr (filename, NULL);
if (temp_bfd == NULL)
{
perror_with_name (filename);
}
if (!bfd_check_format (temp_bfd, bfd_core))
{
bfd_close (temp_bfd);
error ("\"%s\" does not appear to be a core dump", filename);
}
/* Looks semi-reasonable. Toss the old core file and work on the new. */
discard_cleanups (old_chain); /* Don't free filename any more */
unpush_target (&core_ops);
core_bfd = temp_bfd;
old_chain = make_cleanup (core_close, core_bfd);
validate_files ();
/* Find the data section */
if (build_section_table (core_bfd, &core_sections, &core_sections_end))
error ("Can't find sections in `%s': %s", bfd_get_filename(core_bfd),
bfd_errmsg (bfd_error));
ontop = !push_target (&core_ops);
make_cleanup (unpush_target, &core_ops);
p = bfd_core_file_failing_command (core_bfd);
if (p)
printf ("Core file invoked as `%s'.\n", p);
siggy = bfd_core_file_failing_signal (core_bfd);
if (siggy > 0)
printf ("Program terminated with signal %d, %s.\n", siggy,
siggy < NSIG ? sys_siglist[siggy] : "(undocumented)");
if (ontop) {
/* Fetch all registers from core file */
target_fetch_registers (-1);
set_current_frame ( create_new_frame (read_register (FP_REGNUM),
read_pc ()));
select_frame (get_current_frame (), 0);
#ifdef SOLIB_ADD
SOLIB_ADD (NULL, from_tty);
#endif
print_sel_frame (0); /* Print the top frame and source line */
} else {
printf (
"Warning: you won't be able to access this core file until you terminate\n\
your %s; do ``info files''\n", current_target->to_longname);
}
discard_cleanups (old_chain);
}
void
core_detach (args, from_tty)
char *args;
int from_tty;
{
if (args)
error ("Too many arguments");
unpush_target (&core_ops);
if (from_tty)
printf ("No core file now.\n");
}
/* Backward compatability with old way of specifying core files. */
void
core_file_command (filename, from_tty)
char *filename;
int from_tty;
{
dont_repeat (); /* Either way, seems bogus. */
if (!filename)
core_detach (filename, from_tty);
else
core_open (filename, from_tty);
}
/* Call this to specify the hook for exec_file_command to call back.
This is called from the x-window display code. */
void
specify_exec_file_hook (hook)
void (*hook) ();
{
exec_file_display_hook = hook;
}
/* The exec file must be closed before running an inferior.
If it is needed again after the inferior dies, it must
be reopened. */
void
close_exec_file ()
{
#ifdef FIXME
if (exec_bfd)
bfd_tempclose (exec_bfd);
#endif
}
void
reopen_exec_file ()
{
#ifdef FIXME
if (exec_bfd)
bfd_reopen (exec_bfd);
#endif
}
/* If we have both a core file and an exec file,
print a warning if they don't go together.
This should really check that the core file came
from that exec file, but I don't know how to do it. */
void
validate_files ()
{
if (exec_bfd && core_bfd)
{
if (core_file_matches_executable_p (core_bfd, exec_bfd))
printf ("Warning: core file does not match specified executable file.\n");
else if (bfd_get_mtime(exec_bfd) > bfd_get_mtime(core_bfd))
printf ("Warning: exec file is newer than core file.\n");
}
}
/* Return the name of the executable file as a string.
ERR nonzero means get error if there is none specified;
otherwise return 0 in that case. */
char *
get_exec_file (err)
int err;
{
if (exec_bfd) return bfd_get_filename(exec_bfd);
if (!err) return NULL;
error ("No executable file specified.\n\
Use the \"file\" or \"exec-file\" command.");
return NULL;
}
static void
core_files_info ()
{
struct section_table *p;
printf ("\tCore file `%s'.\n", bfd_get_filename(core_bfd));
for (p = core_sections; p < core_sections_end; p++)
printf("\tcore file from 0x%08x to 0x%08x is %s\n",
p->addr, p->endaddr,
bfd_section_name (core_bfd, p->sec_ptr));
}
void
memory_error (status, memaddr)
int status;
CORE_ADDR memaddr;
{
if (status == EIO)
{
/* Actually, address between memaddr and memaddr + len
was out of bounds. */
error ("Cannot access memory: address 0x%x out of bounds.", memaddr);
}
else
{
if (status >= sys_nerr || status < 0)
error ("Error accessing memory address 0x%x: unknown error (%d).",
memaddr, status);
else
error ("Error accessing memory address 0x%x: %s.",
memaddr, sys_errlist[status]);
}
}
/* Same as target_read_memory, but report an error if can't read. */
void
read_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int status;
status = target_read_memory (memaddr, myaddr, len);
if (status != 0)
memory_error (status, memaddr);
}
/* Same as target_write_memory, but report an error if can't write. */
void
write_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int status;
status = target_write_memory (memaddr, myaddr, len);
if (status != 0)
memory_error (status, memaddr);
}
/* Read an integer from debugged memory, given address and number of bytes. */
long
read_memory_integer (memaddr, len)
CORE_ADDR memaddr;
int len;
{
char cbuf;
short sbuf;
int ibuf;
long lbuf;
if (len == sizeof (char))
{
read_memory (memaddr, &cbuf, len);
return cbuf;
}
if (len == sizeof (short))
{
read_memory (memaddr, (char *)&sbuf, len);
SWAP_TARGET_AND_HOST (&sbuf, sizeof (short));
return sbuf;
}
if (len == sizeof (int))
{
read_memory (memaddr, (char *)&ibuf, len);
SWAP_TARGET_AND_HOST (&ibuf, sizeof (int));
return ibuf;
}
if (len == sizeof (lbuf))
{
read_memory (memaddr, (char *)&lbuf, len);
SWAP_TARGET_AND_HOST (&lbuf, sizeof (lbuf));
return lbuf;
}
error ("Cannot handle integers of %d bytes.", len);
return -1; /* for lint */
}
/* Read or write the core file.
Args are address within core file, address within gdb address-space,
length, and a flag indicating whether to read or write.
Result is a length:
0: We cannot handle this address and length.
> 0: We have handled N bytes starting at this address.
(If N == length, we did it all.) We might be able
to handle more bytes beyond this length, but no
promises.
< 0: We cannot handle this address, but if somebody
else handles (-N) bytes, we can start from there.
The actual work is done by xfer_memory in exec.c, which we share
in common with exec_xfer_memory(). */
static int
core_xfer_memory (memaddr, myaddr, len, write)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
{
int res;
res = xfer_memory (memaddr, myaddr, len, write,
core_bfd, core_sections, core_sections_end);
#ifdef SOLIB_XFER_MEMORY
if (res == 0)
res = SOLIB_XFER_MEMORY (memaddr, myaddr, len, write);
#endif
return res;
}
/* Get the registers out of a core file. This is the machine-
independent part. Fetch_core_registers is the machine-dependent
part, typically implemented in the xm-file for each architecture. */
static int
get_core_registers (regno)
int regno;
{
sec_ptr reg_sec;
unsigned size;
char *the_regs;
reg_sec = bfd_get_section_by_name (core_bfd, ".reg");
size = bfd_section_size (core_bfd, reg_sec);
the_regs = alloca (size);
if (bfd_get_section_contents (core_bfd, reg_sec, the_regs,
(unsigned)0, size))
{
fetch_core_registers (the_regs, size, 0);
}
else
{
fprintf (stderr, "Couldn't fetch registers from core file: %s\n",
bfd_errmsg (bfd_error));
}
/* Now do it again for the float registers, if they exist. */
reg_sec = bfd_get_section_by_name (core_bfd, ".reg2");
if (reg_sec) {
size = bfd_section_size (core_bfd, reg_sec);
the_regs = alloca (size);
if (bfd_get_section_contents (core_bfd, reg_sec, the_regs,
(unsigned)0, size))
{
fetch_core_registers (the_regs, size, 2);
}
else
{
fprintf (stderr, "Couldn't fetch register set 2 from core file: %s\n",
bfd_errmsg (bfd_error));
}
}
registers_fetched();
return 0; /* FIXME, what result goes here? */
}
struct target_ops core_ops = {
"core", "Local core dump file",
"Use a core file as a target. Specify the filename of the core file.",
core_open, core_close,
child_attach, core_detach, 0, 0, /* resume, wait */
get_core_registers,
0, 0, 0, 0, /* store_regs, prepare_to_store, conv_to, conv_from */
core_xfer_memory, core_files_info,
0, 0, /* core_insert_breakpoint, core_remove_breakpoint, */
0, 0, 0, 0, 0, /* terminal stuff */
0, 0, 0, 0, 0, /* kill, load, add_syms, call fn, lookup sym */
child_create_inferior, 0, /* mourn_inferior */
core_stratum, 0, /* next */
0, 1, 1, 1, 0, /* all mem, mem, stack, regs, exec */
OPS_MAGIC, /* Always the last thing */
};
void
_initialize_core()
{
add_com ("core-file", class_files, core_file_command,
"Use FILE as core dump for examining memory and registers.\n\
No arg means have no core file. This command has been superseded by the\n\
`target core' and `detach' commands.");
add_target (&core_ops);
}