darling-gdb/gdb/testsuite/ChangeLog
1993-04-28 20:32:09 +00:00

323 lines
13 KiB
Plaintext

Wed Apr 28 13:19:07 1993 K. Richard Pixley (rich@rtl.cygnus.com)
* */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory
Makefiles.
Fri Apr 23 18:13:28 1993 K. Richard Pixley (rich@rtl.cygnus.com)
Switch to using configure's configdirs.
* Makefile.in (Makefile): add configure.in dependency.
(SUBDIRS): removed redundant assignment.
* configure.in: switch subdirs assignment to configdirs.
* gdb.t*/configure.in: new files.
Thu Apr 22 08:27:53 1993 Ian Lance Taylor (ian@cygnus.com)
* gdb.t07/watchpoint.exp: Removed a29k expected failure which now
works.
Tue Apr 20 13:38:40 1993 Fred Fish (fnf@cygnus.com)
* gdb.{t20,t21,t22,t23}/Makefile.in: Use $(srcdir) to avoid $<
in explicit rules. Apparently this is not supported by some makes.
Mon Apr 19 01:54:53 1993 John Gilmore (gnu@cygnus.com)
* gdb.t31/Makefile.in: Use $(srcdir) when avoiding $<, sigh.
Fri Apr 16 09:33:46 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/unix-gdb.exp: Add back missing return 0 which mysteriously
disappeared.
Thu Apr 15 02:28:24 1993 John Gilmore (gnu@cacophony.cygnus.com)
* gdb.t31/Makefile.in: Avoid $< in explicit rule.
Wed Apr 14 16:38:47 1993 Fred Fish (fnf@cygnus.com)
* gdb.t07/watchpoint.exp: Remove setup_xfail for i486
watchpoint problem that is now fixed.
* gdb.t30/chexp.exp: Remove setup_xfail for printing
uninitialized convenience variables.
* gdb.t31/chillvars.exp: Fix expected patterns for printing
structures.
Wed Apr 14 12:55:58 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS
which causes expect to get out of sync with gdb on long output
from help set.
* gdb.t09/corefile.exp: Make expected pattern for core file
failing signal and frame output format less sun specific.
Tue Apr 13 23:18:07 1993 Per Bothner (bothner@cygnus.com)
* gdb.t31/chillvars.exp: Add and remove initial dummy
breakpoint, so that symbol table is forced in.
(Needed at least on Sunos4, though it seems not SVR4.)
* gdb.t31/chillvars.exp: Update for changed output format.
Sun Apr 11 17:21:45 1993 Rob Savoye (rob at darkstar.cygnus.com)
* config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path.
Wed Apr 7 21:28:21 1993 Rob Savoye (rob@cygnus.com)
* Makefile.in: Added --srcdir when invoking runtest, removed the
need for a local config file. (optional now)
Wed Apr 7 14:13:41 1993 Fred Fish (fnf@cygnus.com)
* gdb.t21/demangle.exp: Only count real fails (not xfails) for
failure count used to force early termination. Add some more
expected failures for gnu style demangling.
Thu Apr 1 09:50:30 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the
pmi variable from gdb.t20/gdbme to get optimized away.
* gdb.t00/teststrategy.exp: Added expected failure for mips-*-*.
Check for written corefile upon timeout _and_ eof.
Tue Mar 30 09:58:16 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/unix-gdb.exp: Add missing return 0.
Tue Mar 30 08:34:25 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* gdb.t16/printcmds.exp: Remove misplaced xfail that caused an early
test termination.
Mon Mar 29 17:37:25 1993 Fred Fish (fnf@cygnus.com)
* configure.in (subdirs): Put back gdb.t17 which mysteriously
disappeared.
Thu Mar 25 21:05:16 1993 Fred Fish (fnf@cygnus.com)
* gdb.t10/crossload.exp: Disable the i860-elf test until such
time as i860 support works.
* gdb.t15/funcargs.exp: Fix expected outputs to include
"backtrace 100\r" rather than just "backtrace\r", to match last
change.
Thu Mar 25 12:14:28 1993 Ian Lance Taylor (ian@cygnus.com)
* config/udi-gdb.exp (gdb_exit): Remove close command.
(gdb_target_udi): New procedure to set the UDI target.
(gdb_start): Don't remove *_soc files. Use gdb_target_udi.
* gdb.t00/default.exp: Added expected failures for a29k-*-udi.
Added waits for prompts after several question responses. Added
some more responses used by a29k-amd-udi-gdb.
* gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
pass different arguments, restart UDI connection after program
completion.
* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
* gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
after program completion.
* gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
compiled with a SELECT_VECS setting.
* gdb.t15/funcargs.exp: Use argument to backtrace to prevent
infinite recursion.
* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
Added checks for COFF results, and made them expected failures for
all targets. It would be better to make them expected failures
for COFF targets only.
Wed Mar 24 14:43:38 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
* Makefile.in: add null dvi target, don't bother to recurse
through test directories for info and install-info; rename
$(datadir) to be dejagnu instead of deja-gnu
Wed Mar 24 09:48:03 1993 Fred Fish (fnf@cygnus.com)
* gdb.t31/gdbme.ch: Re-enable code that previously caused
compiler to coredump.
* gdb.t31/chillvars.exp: Re-enable tests that depend on that
code.
Tue Mar 23 08:53:42 1993 Fred Fish (fnf@cygnus.com)
* gdb.t31/gdbme.ch: Comment out code that causes chill compiler
coredump.
* gdb.t31/chillvars.exp: Comment out tests that depend on that
code.
Sun Mar 21 17:56:47 1993 Rob Savoye (rob at darkstar.cygnus.com)
* gdb.t03/ptype.exp: tests for return code from gdb_test.
* gdb.t00/teststrategy.exp: Uses which proc rather than spawning
which in a shell. Deletes xgdb when done.
* config/unix-gdb.exp: Won't try to spawn $GDB unless it exists.
Tests the return from the "set height" or "set width" commands.
Added a few return codes where needed.
Wed Mar 17 11:31:01 1993 Fred Fish (fnf@cygnus.com)
* Makefile.in (SUBDIRS): Add gdb.t17.
* configure.in (subdirs): Add gdb.t17.
* gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}: New test
files to test gdb's calling of functions in the inferior with
the correct arguments and gdb's ability to retrieve any
result returned.
Tue Mar 16 15:37:11 1993 Fred Fish (fnf@cygnus.com)
* config/unix-gdb.exp (gdb_exit): Remove close commands that
may be called after gdb goes away. Previous versions of expect
needed these to avoid file descriptor leaks, but they cause
errors with the current revision of expect.
* gdb.t00/gdbvars.exp: Use -re on expected output after
setting sevenbit-strings.
* gdb.t04/setvar.exp, gdb.t13/bitfields.exp: Make commands
to set sevenbit-strings consistent across tests.
gdb.t30/chexp.exp, gdb.t31/chillvars.exp: Make commands to
set sevenbit-strings consistent across tests.
Fri Mar 12 08:47:20 1993 Fred Fish (fnf@cygnus.com)
* gdb.t21/demangle.exp (proc demangle): Adjust quotes in an
expected output to match current "expect" expectations.
Wed Mar 10 18:01:49 1993 Fred Fish (fnf@cygnus.com)
* gdb.t00/default.exp: Change expected output for default "source"
command, to match new gdb behavior which requires a filename to
source.
Tue Mar 9 11:00:56 1993 Fred Fish (fnf@cygnus.com)
* gdb.t07/watchpoint.exp (test_simple_watchpoint): Set up
expected fail for i486-*-* that misses the marker2 function.
* gdb.t10/crossload.exp (bfddefault): Allow successful
recognition of a format to pass even if no symbols are found.
Explicitly catch failures where the format is not recognized
or is ambiguous, and add the reason to the fail message.
* gdb.t10/crossload.exp (bfdexplicit): Catch failure where
the cause is and invalid target and add reason to failure message.
* gdb.t10/crossload.exp: Fix bfd target names for elf32-m68k,
elf32-i386, elf32-sparc, and elf32-i860.
* gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
Set up expected failure for 'filename'::variable scope resolution,
which is now apparently broken on all targets.
* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
gdb.t23/templates.exp: Change failure for missing binfile into
just a warning.
gdb.t21/demangle.exp: Change all cfront references to 'arm'
references.
Mon Mar 8 19:20:28 1993 Fred Fish (fnf@cygnus.com)
* gdb.t00/default.exp: Add expected output for default "source"
command, to match new gdb behavior.
* gdb.t09/corefile.exp: Use GDBFLAGS when spawning GDB.
Sun Mar 7 15:14:09 1993 Rob Savoye (rob@cygnus.com)
* config/*-gdb.exp: returns an error, rather than exiting on
internal errors.
Tue Mar 2 18:09:32 1993 Fred Fish (fnf@cygnus.com)
* gdb.t03/gdbme.c: Add pointer to struct variable.
* gdb.t03/ptype.exp: Test equivalence of '.' and '->' for
referencing struct members.
Thu Feb 25 10:39:06 1993 Ian Lance Taylor (ian@cygnus.com)
* configure.in (mips-idt-ecoff): New target.
* config/mips-gdb.exp: New file for remote board using MIPS remote
debugging protocol.
* Redid configuration scheme. Removed gdb.t*/configure.in.
Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*. Changed to use CC, CXX
instead of CC_FOR_TARGET, CXX_FOR_TARGET. Added mostlyclean and
distclean targets. Built executables via .o files. Adjusted
tests to account for source files in $(srcdir) rather than
$(objdir).
* lib/gdb.exp (runto): Don't expect () after the function name,
because it may have arguments.
Wed Feb 24 08:05:38 1993 Ian Lance Taylor (ian@cygnus.com)
* gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp,
gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
expected failures for mips-idt-* and mips-sgi-*.
* gdb.t00/default.exp (attach): Kill process if requested.
* gdb.t00/help.exp (help target core, help target): Accept a gdb
that does not read core files.
* gdb.t01/run.exp: Removed checks for exit status code.
* gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
it is linked in.
* gdb.t03/ptype.exp: Increase timeout when calling malloc.
* gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
appropriate, rather than doing it by hand.
* gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
execution.
* gdb.t10/crossload.exp: Kill existing program if needed.
* gdb.t15/funcargs.exp: Use delete_breakpoints function where
appropriate, rather than doing it by hand. Always increase
timeout for this test, not just for VxWorks.
Wed Feb 24 08:03:38 1993 Fred Fish (fnf@cygnus.com)
* gdb.t31/chillvars.exp (test_structs): New proc to test printing
of Chill STRUCT types and STRUCT values.
* gdb.t31/chillvars.exp (test_strings): Expect "CHAR" now, rather
than "char".
* gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
struct2): New struct definitions and initializations to test
simple Chill STRUCT types.
Tue Feb 23 11:55:06 1993 Fred Fish (fnf@cygnus.com)
* gdb.t00/teststrategy.exp: Track reversion in gdb to not print
the null byte at the end of strings.
* gdb.t00/default.exp: Make show version insensitive to copyright
date.
* gdb.t16/in-gdbme.c (ctable1, ctable2): Make explicitly unsigned
to avoid dependencies on target char signedness.
* gdb.t16/printcmds.exp: Update expected results for explicitly
unsigned char.
* gdb.t16/printcmds.exp: Remove setup_xfails for i960 that should
now work.
* gdb.t21/demangle.exp: Add many more patterns for template
demangling, most of them being expected failures.
* gdb.t21/demangle.exp (proc demangle): Quote the demangled
string we are matching for, to match on the whole string.
* gdb.t21/demangle.exp: Add many new test strings to demangle,
and fix a whole bunch that had incorrect expected output but were
passing anyway because of the bug in "proc demangle".
* gdb.t31/chillvars.exp: Remove setup_xfail for printing string
type.
* gdb.t31/in-gdbme.ch: Uncomment string4, now compiles.
Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
* gdb/testsuite: made modifications to testcases, etc., to allow
them to work properly given the reorganization of deja-gnu and the
relocation of the testcases from deja-gnu to a "tool" subdirectory.
Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
* gdb/testsuite: Initial creation of gdb/testsuite.
Migrated dejagnu testcases and support files for testing nm to
gdb/testsuite from deja-gnu. These files were moved "as is"
with no modifications. This migration is part of a major overhaul
of dejagnu. The modifications to these testcases, etc., which
will allow them to work with the new version of dejagnu will be
made in a future update.