darling-gdb/gdb/Makefile.in
Ian Lance Taylor aecc5459ab * Makefile.in (MAKEOVERRIDES): Define to be empty for GNU Make
3.63.

Also corrected the definitions of CC_FOR_TARGET, CXX_FOR_TARGET and
CHILL_FOR_TARGET.
1993-03-08 06:00:50 +00:00

905 lines
31 KiB
Makefile

#Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
prefix = /usr/local
program_transform_name =
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
tooldir = $(libdir)/$(target_alias)
datadir = $(prefix)/lib
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc
SHELL = /bin/sh
INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
AR = ar
AR_FLAGS = qv
RANLIB = ranlib
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
TERMCAP = -ltermcap
# System V: If you compile gdb with a compiler which uses the coff
# encapsulation feature (this is a function of the compiler used, NOT
# of the m-?.h file selected by config.gdb), you must make sure that
# the GNU nm is the one that is used by munch.
# If you are compiling with GCC, make sure that either 1) You use the
# -traditional flag, or 2) You have the fixed include files where GCC
# can reach them. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
#CC=cc
#CC=gcc -traditional
GCC=gcc
# Directory containing source files. Don't clean up the spacing,
# this exact string is matched for by the "configure" script.
srcdir = .
# It is also possible that you will need to add -I/usr/include/sys to the
# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
# is where it should be according to Posix).
# If you use bison instead of yacc, it needs to include the "-y" argument.
#BISON="bison -y"
BISON=yacc
YACC=$(BISON)
# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${srcdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefinded refs.
#CC-LD=gcc -static
CC-LD=${CC}
# Where is the "include" directory? Traditionally ../include or ./include
INCLUDE_DIR = ${srcdir}/../include
INCLUDE_DEP = $$(INCLUDE_DIR)
# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
# or ./mmalloc (When we want the binary library built from it, we use
# ${MMALLOC_DIR}${subdir}.)
# Note that mmalloc can still be used on systems without mmap().
# To use your system malloc, comment out the following defines.
MMALLOC_DIR = ${srcdir}/../mmalloc
MMALLOC_DEP = $$(MMALLOC_DIR)
MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a
# To use your system malloc, uncomment MMALLOC_DISABLE.
#MMALLOC_DISABLE = -DNO_MMALLOC
# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
BFD_DIR = ${srcdir}/../bfd
BFD_DEP = $$(BFD_DIR)
BFD_LIB = ./../bfd${subdir}/libbfd.a
# Where is the source dir for the READLINE library? Traditionally in .. or .
# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
READLINE_DIR = ${srcdir}/../readline
READLINE_DEP = $$(READLINE_DIR)
RL_LIB = ./../readline${subdir}/libreadline.a
# All the includes used for CFLAGS and for lint.
# -I. for config files.
# -I${srcdir} possibly for regex.h also.
INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR)
# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
# from the config/ directory.
GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
#PROFILE_CFLAGS = -pg
# CFLAGS is specifically reserved for setting from the command line
# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
CFLAGS = -g
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
# None of the things in CFLAGS will do any harm, and on some systems
# (e.g. SunOS4) it is important to use the MH_CFLAGS.
LDFLAGS = $(CFLAGS)
# Where is the "-liberty" library, containing getopt and obstack?
LIBIBERTY_DIR = ${srcdir}/../libiberty
LIBIBERTY = ./../libiberty${subdir}/libiberty.a
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
OPCODES = ./../opcodes${subdir}/libopcodes.a
# The config/mh-* file must define REGEX and REGEX1 on USG machines.
# If your sysyem is missing alloca(), or, more likely, it's there but
# it doesn't work, define ALLOCA & ALLOCA1 too.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
VERSION = 4.8.1
DIST=gdb
LINT=/usr/5bin/lint
LINTFLAGS= -I${BFD_DIR}
DGFLAGS=
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL=$(CHILL)" \
"CHILL_LIB=$(CHILL_LIB)" \
$(end-sanitize-chill)\
"CXX=$(CXX)" \
"CXXFLAGS=$(CXXFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"BISON=$(BISON)"
# Flags that we pass when building the testsuite.
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CXX = gcc
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
$(start-sanitize-chill)
CHILLFLAGS = $(CFLAGS)
CHILL = gcc
CHILL_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CHILL_LIB = -lchill
$(end-sanitize-chill)
TARGET_FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
"CC=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
$(end-sanitize-chill)\
"CXX=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"BISON=$(BISON)"
# Source files in the main directory.
# Files which are included via a config/* Makefile fragment
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_MAINDIR = \
blockframe.c breakpoint.c command.c core.c demangle.c \
environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
main.c printcmd.c gdbtypes.c \
remote.c source.c stack.c symmisc.c symtab.c symfile.c \
utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
mem-break.c target.c \
dbxread.c coffread.c elfread.c dwarfread.c stabsread.c \
ieee-float.c language.c parse.c buildsym.c objfiles.c \
minsyms.c mipsread.c maint.c ch-exp.y c-lang.c ch-lang.c m2-lang.c \
complaints.c typeprint.c c-typeprint.c ch-typeprint.c m2-typeprint.c \
c-valprint.c cp-valprint.c ch-valprint.c m2-valprint.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
# Files which are included via a config/* Makefile fragment
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_SUBDIR = \
${srcdir}/vx-share/dbgRpcLib.h \
${srcdir}/vx-share/ptrace.h \
${srcdir}/vx-share/vxTypes.h \
${srcdir}/vx-share/vxWorks.h \
${srcdir}/vx-share/wait.h \
${srcdir}/vx-share/xdr_ld.h \
${srcdir}/vx-share/xdr_ptrace.h \
${srcdir}/vx-share/xdr_rdb.h \
${srcdir}/nindy-share/b.out.h \
${srcdir}/nindy-share/block_io.h \
${srcdir}/nindy-share/coff.h \
${srcdir}/nindy-share/demux.h \
${srcdir}/nindy-share/env.h \
${srcdir}/nindy-share/stop.h \
${srcdir}/nindy-share/ttycntl.h \
${srcdir}/29k-share/udi_soc
# Source files in sub-subdirectories. We need to know this because we
# make relative symlinks with them.
SFILES_SUBSUBDIR = \
${srcdir}/29k-share/udi/udiphcfg.h \
${srcdir}/29k-share/udi/udiphsun.h \
${srcdir}/29k-share/udi/udiproc.h \
${srcdir}/29k-share/udi/udipt29k.h \
${srcdir}/29k-share/udi/udiptcfg.h \
${srcdir}/29k-share/udi/udisoc.h
# Non-source files in subdirs, that should go into gdb.tar.Z.
NONSRC_SUBDIR = \
${srcdir}/nindy-share/Makefile \
${srcdir}/nindy-share/VERSION \
${srcdir}/nindy-share/README \
${srcdir}/vx-share/README
# All source files that go into linking GDB, except config-specified files.
SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR) $(SFILES_SUBSUBDIR)
# All source files that lint should look at
LINTFILES = $(SFILES) $(YYFILES) init.c
# Any additional files specified on these lines should also be added to
# the OTHERS = definition below, so they go in the tar files.
SFILES_STAND = $(SFILES) standalone.c
SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
# Header files that are not named in config/* Makefile fragments go here.
HFILES= breakpoint.h buildsym.h call-cmds.h command.h defs.h \
environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
gdb-stabs.h ieee-float.h inferior.h language.h \
minimon.h objfiles.h parser-defs.h partial-stab.h \
serial.h signals.h solib.h symfile.h symtab.h stabsread.h \
target.h terminal.h typeprint.h xcoffsolib.h value.h \
tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \
xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \
nm-trash.h \
c-lang.h ch-lang.h m2-lang.h complaints.h \
ns32k-opcode.h \
valprint.h
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
POSSLIBS_MAINDIR = regex.c regex.h alloca.c
POSSLIBS = $(POSSLIBS_MAINDIR)
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \
ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps \
README TODO TAGS NEWS Projects \
.gdbinit COPYING $(YYFILES) \
copying.c Convex.notes copying.awk \
saber.suppress standalone.c stuff.c kdb-start.c \
putenv.c gcc.patch
# Subdirectories of gdb, which should be included in their entirety in
# gdb-xxx.tar.Z:
TARDIRS = doc sparclite # tests
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
DEPFILES= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES)
TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
command.o utils.o expprint.o environ.o gdbtypes.o \
copying.o $(DEPFILES) mem-break.o target.o \
ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
buildsym.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
TSOBS = inflow.o
NTSOBS = standalone.o
TSSTART = /lib/crt0.o
NTSSTART = kdb-start.o
SUBDIRS = doc testsuite
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
.c.o:
${CC} -c ${INTERNAL_CFLAGS} $<
all: gdb
$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=testsuite subdir_do
check:
../dejagnu/runtest -to gdb $(DGFLAGS)
info: force
$(MAKE) $(FLAGS_TO_PASS) DO=info "DODIRS=$(SUBDIRS)" subdir_do
install-info: force
$(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
clean-info: force
$(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
gdb.z:gdb.1
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
pack gdb.t ; rm -f gdb.t
mv gdb.t.z gdb.z
install: gdb
-parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi
-parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
-if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi
-n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
$(INSTALL_PROGRAM) gdb $(bindir)/$$n; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1
$(M_INSTALL)
$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
init.c: $(srcdir)/munch $(OBS) $(TSOBS)
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
#unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
#unload ${srcdir}/vx-share/*.h
#unload ${srcdir}/nindy-share/[A-Z]*
#load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1: gdb
rm -f gdb1
cp gdb gdb1
# This is a remote stub which runs under unix and starts up an
# inferior process. This is at least useful for debugging GDB's
# remote support.
rapp: $(RAPP_OBS)
rm -f rapp_init.c
${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
# Support for building Makefile out of configured pieces, automatically
# generated dependencies, etc. alldeps.mak is a file that contains
# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
# ALLDEPFILES_SUBDIR, ALLDEPFILES_SUBSUBDIR, ALLPARAM, and ALLCONFIG,
# all cadged from the current contents of the config subdirectory.
alldeps.mak: ${srcdir}/config
rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
for i in `ls -d ${srcdir}/config/*.m[ht]` ; do \
echo $$i >>allconfig.tmp; \
awk <$$i ' \
$$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
|| $$1 == "NATDEPFILES=" { \
for (i = 2; i <= NF; i++) \
print $$i >> "alldeps.tmp" ; \
} \
$$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
print $$2 >> "allparam.tmp" }' ; \
done
sort <alldeps.tmp | uniq | \
sed -e 's/arm-convert.o/arm-convert.s/' \
-e 's!^Onindy.o!nindy-share/Onindy.c!' \
-e 's!^nindy.o!nindy-share/nindy.c!' \
-e 's!ttybreak.o!nindy-share/ttybreak.c!' \
-e 's!ttyflush.o!nindy-share/ttyflush.c!' \
-e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
-e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
-e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
-e 's!udr.o!29k-share/udi/udr.c!' \
-e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \
-e 's/\.o/.c/' \
>alldeps2.tmp
echo '# Start of "alldeps.mak" definitions' \
>>alldeps.mak;
echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR) $$(ALLDEP_FILES_SUBSUBDIR)' \
>>alldeps.mak;
grep -v / alldeps2.tmp | \
awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
grep / alldeps2.tmp | grep -v '/.*/' | \
awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
grep '/.*/' alldeps2.tmp | \
awk 'BEGIN {printf "ALLDEPFILES_SUBSUBDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
echo '# End of "alldeps.mak" definitions' \
>>alldeps.mak;
rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
# The sed script makes everything which depends on {x,t}m.h depend on
# config.status as well, in case someone reconfigures gdb out from
# under an already compiled gdb.
depend: $(SOURCES) Makefile.in
@echo Ignore errors about non-existent system-supplied include files
@echo for systems other than the one you are using.
@echo Also ignore parse errors in valops.c, and any errors in
@echo arm-convert.s.
touch xm.h tm.h nm.h
-$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \
-I${READLINE_DIR} $(INCLUDE_CFLAGS) \
`ls $(SOURCES) | grep -v '\.[hy]$$' | \
sort -u` >depend.tmp
# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
# for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
# by the various subdirectories.
if [ "${srcdir}" = "." ] ; then \
<depend.tmp sed \
-e 's; ./xm.h; xm.h;g' \
-e 's; ./tm.h; tm.h;g' \
-e 's; ./nm.h; nm.h;g' \
-e 's; \./; $${srcdir}/;g' \
-e 's; vx-share/; $${srcdir}/vx-share/;g' \
-e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
-e 's; 29k-share/; $${srcdir}/29k-share/;g' \
>depend.tm2; \
rm depend.tmp; \
mv depend.tm2 depend.tmp; \
fi
<depend.tmp sed \
-e 's; [xt]m.h;& config.status;g' \
-e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
-e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
-e 's; ./xm.h; xm.h config.status;g' \
-e 's; ./tm.h; tm.h config.status;g' \
-e 's; ./nm.h; nm.h config.status;g' \
>depend
rm depend.tmp
config.status:
@echo "You must configure gdb. Look at the README file for details."
@false
# This checks the configure.in file versus the config/ directory.
config-check: config-check-hosts config-check-targets
config-check-hosts:
grep gdb_host= ${srcdir}/configure.in | \
sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
(cd ${srcdir}/config; ls *.mh) >HOSTdir.o
diff -u HOSTconf.o HOSTdir.o
config-check-targets:
grep gdb_target= ${srcdir}/configure.in | \
sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
(cd ${srcdir}/config; ls *.mt) >TARGdir.o
diff -u HOSTconf.o HOSTdir.o
# These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h
tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h
xm-news1000.h: xm-news.h
xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
xm-sun4os4.h: xm-sparc.h
tm-sun4os4.h: tm-sparc.h
xm-vaxult.h: xm-vax.h
xm-vaxbsd.h: xm-vax.h
kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
rm -f init.c
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
$(CC) $(LDFLAGS) -c init.c $(CLIBS)
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-lc $(CLIBS)
# Put the proper machine-specific files first.
# createtags will edit the .o in DEPFILES into .c
TAGS: ${TAGFILES}
$(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \
$(DEPFILES) ${TAGFILES}
tags: TAGS
# Making distributions of GDB and friends.
# Make a directory `proto-gdb.dir' that contains an image of the GDB
# directory of the distribution, built up with symlinks.
make-proto-gdb.dir: force_update
$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
# Make a tar file containing the GDB directory of the distribution.
gdb.tar.Z: force_update
$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
$(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
# Update the "alldeps.mak" file in a source directory.
update-alldeps: force_update
../configure none -norecursion
rm -f alldeps.mak
$(MAKE) $(MFLAGS) alldeps.mak
# Update the "depend" and "alldeps.mak" files in a source directory.
# We update alldeps.mak first, since it is used to generate the list
# of files to be checked for dependencies.
update-depend: update-alldeps force_update
../configure none -norecursion
rm -f depend
$(MAKE) $(MFLAGS) depend
# Set up the GDB source directory for distribution, by building all files that
# are products of other files.
setup-to-dist: update-depend force_update
../configure none
(cd doc; $(MAKE) $(MFLAGS) GDBvn.texi)
$(MAKE) $(MFLAGS) gdb.info
$(MAKE) $(MFLAGS) refcard.ps
# Build a tar file from a proto-gdb.dir.
gdb-$(VERSION).tar.Z: force_update
rm -f gdb.tar gdb-$(VERSION).tar.Z
$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
ln -s proto-gdb.dir $(DIST)
tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
rm -rf $(DIST) proto-gdb.dir
# Build a proto-gdb.dir after GDB has been set up for distribution.
# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
# built in the setup-to-dist process, since it defines things like ALLCONFIG
# and ALLDEPFILES, that we need.
make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
rm -rf proto-gdb.dir
mkdir proto-gdb.dir
cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
cd proto-gdb.dir ; ln -s ../${INFOFILES} .
cd proto-gdb.dir ; for i in ${TARDIRS}; do \
(mkdir $$i; cd $$i; \
ln -s ../../$$i/* .; \
rm -rf SCCS CVS.adm RCS config.status; \
if test -f Makefile.in; then rm Makefile; else true; fi;); done
mkdir proto-gdb.dir/config
cd proto-gdb.dir/config ; \
for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share
mkdir proto-gdb.dir/29k-share proto-gdb.dir/29k-share/udi
cd proto-gdb.dir/config ; \
for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
do ln -s ../../$$i ../$$i ; done
cd proto-gdb.dir/config ; \
for i in $(SFILES_SUBSUBDIR) $(ALLDEPFILES_SUBSUBDIR); \
do ln -s ../../../$$i ../$$i ; done
chmod og=u `find . -print`
clean:
rm -f *.o ${ADD_FILES} *~
rm -f init.c version.c
rm -f gdb core gdb.tar gdb.tar.Z make.log
rm -f gdb[0-9]
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f ${TESTS} Makefile depend
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
realclean: clean
rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f Makefile depend
@$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
subdir_do: force
@for i in $(DODIRS); do \
if [ -d ./$$i ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
refcard.dvi:
( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) )
mv ./doc/refcard.dvi .
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
refcard.ps:
( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) )
mv ./doc/refcard.ps .
# GDB MANUAL: TeX dvi file
gdb.dvi:
( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) )
mv ./doc/gdb.dvi .
# GDB MANUAL: info file
gdb.info:
( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) )
mv ./doc/gdb.info* .
# Make copying.c from COPYING
copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
version.c: Makefile
echo 'char *version = "$(VERSION)";' >version.c
# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to c-exp.tab.o.
# ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
# (some "makes" rewrite the VPATH into command arguments if they match deps).
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in
@echo 'Expect 4 shift/reduce conflicts.'
${YACC} $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > ././c-exp.tab.c
-rm y.tab.c
# start-sanitize-chill
# ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to ch-exp.tab.o.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
ch-exp.tab.o: ch-exp.tab.c
ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in
@echo 'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
${YACC} $(srcdir)/ch-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > ././ch-exp.tab.c
-rm y.tab.c
# end-sanitize-chill
# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
# in srcdir, then compiled in target dir to m2-exp.tab.o.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in
${YACC} $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > ././m2-exp.tab.c
-rm y.tab.c
main.o: ${srcdir}/main.c
${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $<
# The symbol-file readers have dependencies on BFD header files.
dbxread.o: ${srcdir}/dbxread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
coffread.o: ${srcdir}/coffread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
mipsread.o: ${srcdir}/mipsread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
elfread.o: ${srcdir}/elfread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
dwarfread.o: ${srcdir}/dwarfread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c
stabsread.o: ${srcdir}/stabsread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c
# Used on RS/6000 native
xcoffread.o: ${srcdir}/xcoffread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
xcoffexec.o: ${srcdir}/xcoffexec.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
# Used on HP-PA native
paread.o: ${srcdir}/paread.c
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c
# Drag in the files that are in another directory.
xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c
xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
nindy.o: ${srcdir}/nindy-share/nindy.c
${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \
${srcdir}/nindy-share/nindy.c
Onindy.o: ${srcdir}/nindy-share/Onindy.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c
ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c
ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
udr.o: ${srcdir}/29k-share/udi/udr.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c
udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
`echo ${DEPFILES} | sed 's/\.o /\.c /g'
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update:
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)
# in GNU Make 4.0.
.NOEXPORT:
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
MAKEOVERRIDES=
# This is the end of "Makefile.in". When built into "Makefile"
# by the configure script, two things are added below this point:
# alldeps.mak -- defintions of all files that are used in
# host- or target-dependent configurations
# depend -- what .o files depend on what .c and .h files,
# for all configurations.