darling-gdb/binutils/ar.c

/* ar.c - Archive modify and extract.
   Copyright 1991, 92, 93, 94 Free Software Foundation, Inc.

This file is part of GNU Binutils.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */

/*
   Bugs: should use getopt the way tar does (complete w/optional -) and
   should have long options too. GNU ar used to check file against filesystem
   in quick_update and replace operations (would check mtime). Doesn't warn
   when name truncated. No way to specify pos_end. Error messages should be
   more consistant.
*/
#include "bfd.h"
#include "sysdep.h"
#include "libiberty.h"
#include "bucomm.h"
#include "aout/ar.h"
#include "libbfd.h"
#include "arsup.h"
#include <stdio.h>
#ifdef POSIX_UTIME
#include <utime.h>
#else /* ! POSIX_UTIME */
#ifdef	USE_UTIME
#include <time.h>
#else /* ! USE_UTIME */
#include <sys/time.h>
#endif /* ! USE_UTIME */
#endif /* ! POSIX_UTIME */
#include <errno.h>
#ifndef errno
extern int errno;
#endif
#define BUFSIZE 8192

#ifdef __GO32___
#define EXT_NAME_LEN 3		/* bufflen of addition to name if it's MS-DOS */
#else
#define EXT_NAME_LEN 6		/* ditto for *NIX */
#endif

/* Kludge declaration from BFD!  This is ugly!  FIXME!  XXX */

struct ar_hdr *
  bfd_special_undocumented_glue PARAMS ((bfd * abfd, char *filename));

/* Forward declarations */

static void
map_over_members PARAMS ((bfd *, void (*)(bfd *), char **, int));

static void
print_contents PARAMS ((bfd * member));

static void
delete_members PARAMS ((bfd *, char **files_to_delete));

static void
do_quick_append PARAMS ((const char *archive_filename,
			 char **files_to_append));

static void
move_members PARAMS ((bfd *, char **files_to_move));

static void
replace_members PARAMS ((bfd *, char **files_to_replace));

static void
print_descr PARAMS ((bfd * abfd));

static void
write_archive PARAMS ((bfd *));

static void
ranlib_only PARAMS ((const char *archname));

static void
ranlib_touch PARAMS ((const char *archname));

/** Globals and flags */

int mri_mode;

/* This flag distinguishes between ar and ranlib:
   1 means this is 'ranlib'; 0 means this is 'ar'.
   -1 means if we should use argv[0] to decide.  */
extern int is_ranlib;

/* Nonzero means don't warn about creating the archive file if necessary.  */
int silent_create = 0;

/* Nonzero means describe each action performed.  */
int verbose = 0;

/* Nonzero means preserve dates of members when extracting them.  */
int preserve_dates = 0;

/* Nonzero means don't replace existing members whose dates are more recent
   than the corresponding files.  */
int newer_only = 0;

/* Controls the writing of an archive symbol table (in BSD: a __.SYMDEF
   member).  -1 means we've been explicitly asked to not write a symbol table;
   +1 means we've been explictly asked to write it;
   0 is the default.
   Traditionally, the default in BSD has been to not write the table.
   However, for POSIX.2 compliance the default is now to write a symbol table
   if any of the members are object files.  */
int write_armap = 0;

/* Nonzero means it's the name of an existing member; position new or moved
   files with respect to this one.  */
char *posname = NULL;

/* Sez how to use `posname': pos_before means position before that member.
   pos_after means position after that member. pos_end means always at end.
   pos_default means default appropriately. For the latter two, `posname'
   should also be zero.  */
enum pos
  {
    pos_default, pos_before, pos_after, pos_end
  } postype = pos_default;

int interactive = 0;

void
mri_emul ()
{
  interactive = isatty (fileno (stdin));
  yyparse ();
}

/* If COUNT is 0, then FUNCTION is called once on each entry.  If nonzero,
   COUNT is the length of the FILES chain; FUNCTION is called on each entry
   whose name matches one in FILES.  */

static void
map_over_members (arch, function, files, count)
     bfd *arch;
     void (*function) PARAMS ((bfd *));
     char **files;
     int count;
{
  bfd *head;

  if (count == 0)
    {
      for (head = arch->next; head; head = head->next)
	function (head);
      return;
    }
  /* This may appear to be a baroque way of accomplishing what we want.
     However we have to iterate over the filenames in order to notice where
     a filename is requested but does not exist in the archive.  Ditto
     mapping over each file each time -- we want to hack multiple
     references.  */

  for (; count > 0; files++, count--)
    {
      boolean found = false;
      for (head = arch->next; head; head = head->next)
	{
	  if (head->filename == NULL)
	    {
	      /* Some archive formats don't get the filenames filled in
		 until the elements are opened.  */
	      struct stat buf;
	      bfd_stat_arch_elt (head, &buf);
	    }
	  if ((head->filename != NULL) &&
	      (!strcmp (*files, head->filename)))
	    {
	      found = true;
	      function (head);
	    }
	}
      if (!found)
	fprintf (stderr, "no entry %s in archive\n", *files);
    }
}

boolean operation_alters_arch = false;

extern char *program_version;

void
do_show_version ()
{
  printf ("GNU %s version %s\n", program_name, program_version);
  exit (0);
}

void
usage ()
{
  if (is_ranlib == 0)
    fprintf (stderr, "\
Usage: %s [-]{dmpqrtx}[abcilosuvV] [member-name] archive-file file...\n\
       %s -M [<mri-script]\n",
	     program_name, program_name);
  else
    fprintf (stderr, "\
Usage: %s [-vV] archive\n", program_name);
  exit (1);
}

/* The option parsing should be in its own function.
   It will be when I have getopt working.  */

int
main (argc, argv)
     int argc;
     char **argv;
{
  char *arg_ptr;
  char c;
  enum
    {
      none = 0, delete, replace, print_table,
      print_files, extract, move, quick_append
    } operation = none;
  int arg_index;
  char **files;
  char *inarch_filename;
  char *temp;
  int show_version;

  program_name = argv[0];
  xmalloc_set_program_name (program_name);

  bfd_init ();
  show_version = 0;

  temp = strrchr (program_name, '/');
  if (temp == (char *) NULL)
    temp = program_name;	/* shouldn't happen, but... */
  else
    ++temp;
  if (is_ranlib > 0 || (is_ranlib < 0 && strcmp (temp, "ranlib") == 0))
    {
      boolean touch = false;

      is_ranlib = 1;
      if (argc < 2)
	usage ();
      if (strcmp (argv[1], "-V") == 0
	  || strcmp (argv[1], "-v") == 0
	  || strncmp (argv[1], "--v", 3) == 0)
	do_show_version ();
      arg_index = 1;
      if (strcmp (argv[1], "-t") == 0)
	{
	  ++arg_index;
	  touch = true;
	}
      while (arg_index < argc)
	{
	  if (! touch)
	    ranlib_only (argv[arg_index]);
	  else
	    ranlib_touch (argv[arg_index]);
	  ++arg_index;
	}
      exit (0);
    }
  else
    is_ranlib = 0;

  if (argc == 2 && strcmp (argv[1], "-M") == 0)
    {
      mri_emul ();
      exit (0);
    }

  if (argc < 2)
    usage ();

  arg_ptr = argv[1];

  if (*arg_ptr == '-')
    ++arg_ptr;			/* compatibility */

  while ((c = *arg_ptr++) != '\0')
    {
      switch (c)
	{
	case 'd':
	case 'm':
	case 'p':
	case 'q':
	case 'r':
	case 't':
	case 'x':
	  if (operation != none)
	    fatal ("two different operation options specified");
	  switch (c)
	    {
	    case 'd':
	      operation = delete;
	      operation_alters_arch = true;
	      break;
	    case 'm':
	      operation = move;
	      operation_alters_arch = true;
	      break;
	    case 'p':
	      operation = print_files;
	      break;
	    case 'q':
	      operation = quick_append;
	      operation_alters_arch = true;
	      break;
	    case 'r':
	      operation = replace;
	      operation_alters_arch = true;
	      break;
	    case 't':
	      operation = print_table;
	      break;
	    case 'x':
	      operation = extract;
	      break;
	    }
	case 'l':
	  break;
	case 'c':
	  silent_create = 1;
	  break;
	case 'o':
	  preserve_dates = 1;
	  break;
	case 'V':
	  show_version = true;
	  break;
	case 's':
	  write_armap = 1;
	  break;
	case 'u':
	  newer_only = 1;
	  break;
	case 'v':
	  verbose = 1;
	  break;
	case 'a':
	  postype = pos_after;
	  break;
	case 'b':
	  postype = pos_before;
	  break;
	case 'i':
	  postype = pos_before;
	  break;
	case 'M':
	  mri_mode = 1;
	  break;
	default:
	  fprintf (stderr, "%s: illegal option -- %c\n", program_name, c);
	  usage ();
	}
    }

  if (show_version)
    do_show_version ();

  if (argc < 3)
    usage ();

  if (mri_mode)
    {
      mri_emul ();
    }
  else
    {
      bfd *arch;

      if ((operation == none || operation == print_table)
	  && write_armap == 1)
	{
	  ranlib_only (argv[2]);
	  exit (0);
	}

      if (operation == none)
	fatal ("no operation specified");

      if (newer_only && operation != replace)
	fatal ("`u' is only meaningful with the `r' option.");

      arg_index = 2;

      if (postype != pos_default)
	posname = argv[arg_index++];

      inarch_filename = argv[arg_index++];

      files = arg_index < argc ? argv + arg_index : NULL;

      if (operation == quick_append)
	{
	  /* Note that quick appending to a non-existent archive creates it,
	     even if there are no files to append. */
	  do_quick_append (inarch_filename, files);
	  exit (0);
	}

      arch = open_inarch (inarch_filename);

      switch (operation)
	{
	case print_table:
	  map_over_members (arch, print_descr, files, argc - 3);
	  break;

	case print_files:
	  map_over_members (arch, print_contents, files, argc - 3);
	  break;

	case extract:
	  map_over_members (arch, extract_file, files, argc - 3);
	  break;

	case delete:
	  if (files != NULL)
	    delete_members (arch, files);
	  break;

	case move:
	  if (files != NULL)
	    move_members (arch, files);
	  break;

	case replace:
	  if (files != NULL || write_armap > 0)
	    replace_members (arch, files);
	  break;

	  /* Shouldn't happen! */
	default:
	  fprintf (stderr, "%s: internal error -- this option not implemented\n",
		   program_name);
	  exit (1);
	}
    }
  return 0;
}

static char *
normalize (file)
     char *file;
{
  char *filename = strrchr (file, '/');
  if (filename != (char *) NULL)
    {
      filename++;
    }
  else
    {
      filename = file;
    }
  return filename;
}

bfd *
open_inarch (archive_filename)
     const char *archive_filename;
{
  bfd **last_one;
  bfd *next_one;
  struct stat sbuf;
  bfd *arch;

  bfd_set_error (bfd_error_no_error);

  if (stat (archive_filename, &sbuf) != 0)
    {

#ifndef __GO32__

/* KLUDGE ALERT! Temporary fix until I figger why
 * stat() is wrong ... think it's buried in GO32's IDT
 * - Jax
 */
      if (errno != ENOENT)
	bfd_fatal (archive_filename);
#endif

      if (!operation_alters_arch)
	{
	  fprintf (stderr, "%s: ", program_name);
	  perror (archive_filename);
	  maybequit ();
	  return NULL;
	}

      /* This routine is one way to forcibly create the archive. */

      do_quick_append (archive_filename, 0);
    }

  arch = bfd_openr (archive_filename, NULL);
  if (arch == NULL)
    {
    bloser:
      bfd_fatal (archive_filename);
    }

  if (bfd_check_format (arch, bfd_archive) != true)
    fatal ("%s is not an archive", archive_filename);
  last_one = &(arch->next);
  /* Read all the contents right away, regardless.  */
  for (next_one = bfd_openr_next_archived_file (arch, NULL);
       next_one;
       next_one = bfd_openr_next_archived_file (arch, next_one))
    {
      *last_one = next_one;
      last_one = &next_one->next;
    }
  *last_one = (bfd *) NULL;
  if (bfd_get_error () != bfd_error_no_more_archived_files)
    goto bloser;
  return arch;
}

static void
print_contents (abfd)
     bfd *abfd;
{
  int ncopied = 0;
  struct stat buf;
  long size;
  if (bfd_stat_arch_elt (abfd, &buf) != 0)
    fatal ("internal stat error on %s", bfd_get_filename (abfd));

  if (verbose)
    printf ("\n<member %s>\n\n", bfd_get_filename (abfd));

  bfd_seek (abfd, 0, SEEK_SET);

  size = buf.st_size;
  while (ncopied < size)
    {
      char cbuf[BUFSIZE];
      int nread;
      int tocopy = size - ncopied;
      if (tocopy > BUFSIZE)
	tocopy = BUFSIZE;

      nread = bfd_read (cbuf, 1, tocopy, abfd);	/* oops -- broke
							   abstraction!  */
      if (nread != tocopy)
	fatal ("%s is not a valid archive",
	       bfd_get_filename (bfd_my_archive (abfd)));
      fwrite (cbuf, 1, nread, stdout);
      ncopied += tocopy;
    }
}

/* Extract a member of the archive into its own file.

   We defer opening the new file until after we have read a BUFSIZ chunk of the
   old one, since we know we have just read the archive header for the old
   one.  Since most members are shorter than BUFSIZ, this means we will read
   the old header, read the old data, write a new inode for the new file, and
   write the new data, and be done. This 'optimization' is what comes from
   sitting next to a bare disk and hearing it every time it seeks.  -- Gnu
   Gilmore  */

void
extract_file (abfd)
     bfd *abfd;
{
  FILE *ostream;
  char cbuf[BUFSIZE];
  int nread, tocopy;
  int ncopied = 0;
  long size;
  struct stat buf;
  if (bfd_stat_arch_elt (abfd, &buf) != 0)
    fatal ("internal stat error on %s", bfd_get_filename (abfd));
  size = buf.st_size;

  if (verbose)
    printf ("x - %s\n", bfd_get_filename (abfd));

  bfd_seek (abfd, 0, SEEK_SET);

  ostream = 0;
  if (size == 0)
    {
      /* Seems like an abstraction violation, eh?  Well it's OK! */
      ostream = fopen (bfd_get_filename (abfd), FOPEN_WB);
      if (!ostream)
	{
	  perror (bfd_get_filename (abfd));
	  exit (1);
	}
    }
  else
    while (ncopied < size)
      {
	tocopy = size - ncopied;
	if (tocopy > BUFSIZE)
	  tocopy = BUFSIZE;

	nread = bfd_read (cbuf, 1, tocopy, abfd);
	if (nread != tocopy)
	  fatal ("%s is not a valid archive",
		 bfd_get_filename (bfd_my_archive (abfd)));

	/* See comment above; this saves disk arm motion */
	if (!ostream)
	  {
	    /* Seems like an abstraction violation, eh?  Well it's OK! */
	    ostream = fopen (bfd_get_filename (abfd), FOPEN_WB);
	    if (!ostream)
	      {
		perror (bfd_get_filename (abfd));
		exit (1);
	      }
	  }
	fwrite (cbuf, 1, nread, ostream);
	ncopied += tocopy;
      }

  fclose (ostream);
  chmod (bfd_get_filename (abfd), buf.st_mode);

  if (preserve_dates)
    {
#ifdef POSIX_UTIME
      struct utimbuf tb;
      tb.actime = buf.st_mtime;
      tb.modtime = buf.st_mtime;
      utime (bfd_get_filename (abfd), &tb);	/* FIXME check result */
#else /* ! POSIX_UTIME */
#ifdef USE_UTIME
      long tb[2];
      tb[0] = buf.st_mtime;
      tb[1] = buf.st_mtime;
      utime (bfd_get_filename (abfd), tb);	/* FIXME check result */
#else /* ! USE_UTIME */
      struct timeval tv[2];
      tv[0].tv_sec = buf.st_mtime;
      tv[0].tv_usec = 0;
      tv[1].tv_sec = buf.st_mtime;
      tv[1].tv_usec = 0;
      utimes (bfd_get_filename (abfd), tv);	/* FIXME check result */
#endif /* ! USE_UTIME */
#endif /* ! POSIX_UTIME */
    }
}

/* Just do it quickly; don't worry about dups, armap, or anything like that */

static void
do_quick_append (archive_filename, files_to_append)
     const char *archive_filename;
     char **files_to_append;
{
  FILE *ofile, *ifile;
  char buf[BUFSIZE];
  long tocopy, thistime;
  bfd *temp;
  struct stat sbuf;
  boolean newfile = false;
  bfd_set_error (bfd_error_no_error);

  if (stat (archive_filename, &sbuf) != 0)
    {

#ifndef __GO32__

/* KLUDGE ALERT! Temporary fix until I figger why
 * stat() is wrong ... think it's buried in GO32's IDT
 * - Jax
 */

      if (errno != ENOENT)
	bfd_fatal (archive_filename);
#endif

      newfile = true;
    }

  ofile = fopen (archive_filename, FOPEN_AUB);
  if (ofile == NULL)
    {
      perror (program_name);
      exit (1);
    }

  temp = bfd_openr (archive_filename, NULL);
  if (temp == NULL)
    {
      bfd_fatal (archive_filename);
    }
  if (newfile == false)
    {
      if (bfd_check_format (temp, bfd_archive) != true)
	fatal ("%s is not an archive", archive_filename);
    }
  else
    {
      fwrite (ARMAG, 1, SARMAG, ofile);
      if (!silent_create)
	fprintf (stderr, "%s: creating %s\n",
		 program_name, archive_filename);
    }

  /* assume it's an achive, go straight to the end, sans $200 */
  fseek (ofile, 0, 2);

  for (; files_to_append && *files_to_append; ++files_to_append)
    {
      struct ar_hdr *hdr = bfd_special_undocumented_glue (temp, *files_to_append);
      if (hdr == NULL)
	{
	  bfd_fatal (*files_to_append);
	}

      BFD_SEND (temp, _bfd_truncate_arname, (temp, *files_to_append, (char *) hdr));

      ifile = fopen (*files_to_append, FOPEN_RB);
      if (ifile == NULL)
	{
	  bfd_nonfatal (*files_to_append);
	}

      if (stat (*files_to_append, &sbuf) != 0)
	{
	  bfd_nonfatal (*files_to_append);
	}

      tocopy = sbuf.st_size;

      /* XXX should do error-checking! */
      fwrite (hdr, 1, sizeof (struct ar_hdr), ofile);

      while (tocopy > 0)
	{
	  thistime = tocopy;
	  if (thistime > BUFSIZE)
	    thistime = BUFSIZE;
	  fread (buf, 1, thistime, ifile);
	  fwrite (buf, 1, thistime, ofile);
	  tocopy -= thistime;
	}
      fclose (ifile);
      if ((sbuf.st_size % 2) == 1)
	putc ('\012', ofile);
    }
  fclose (ofile);
  bfd_close (temp);
}


static void
write_archive (iarch)
     bfd *iarch;
{
  bfd *obfd;
  int namelen = strlen (bfd_get_filename (iarch));
  char *old_name = xmalloc (namelen + 1);
  char *new_name = xmalloc (namelen + EXT_NAME_LEN);
  bfd *contents_head = iarch->next;

  strcpy (old_name, bfd_get_filename (iarch));
  strcpy (new_name, bfd_get_filename (iarch));

#ifdef __GO32__			/* avoid long .extensions for MS-DOS */
  strcpy (new_name + namelen, "-a");
#else
  strcpy (new_name + namelen, "-art");
#endif

  obfd = bfd_openw (new_name, bfd_get_target (iarch));

  if (obfd == NULL)
    bfd_fatal (old_name);

  bfd_set_format (obfd, bfd_archive);

  /* Request writing the archive symbol table unless we've
     been explicitly requested not to.  */
  obfd->has_armap = write_armap >= 0;

  if (bfd_set_archive_head (obfd, contents_head) != true)
    bfd_fatal (old_name);

  if (!bfd_close (obfd))
    bfd_fatal (old_name);

  /* We don't care if this fails; we might be creating the archive.  */
  bfd_close (iarch);
  unlink (old_name);

  if (rename (new_name, old_name) != 0)
    bfd_fatal (old_name);
}

/* Return a pointer to the pointer to the entry which should be rplacd'd
   into when altering.  DEFAULT_POS should be how to interpret pos_default,
   and should be a pos value.  */

bfd **
get_pos_bfd (contents, default_pos)
     bfd **contents;
     enum pos default_pos;
{
  bfd **after_bfd = contents;
  enum pos realpos = (postype == pos_default ? default_pos : postype);

  if (realpos == pos_end)
    {
      while (*after_bfd)
	after_bfd = &((*after_bfd)->next);
    }
  else
    {
      for (; *after_bfd; after_bfd = &(*after_bfd)->next)
	if (!strcmp ((*after_bfd)->filename, posname))
	  {
	    if (realpos == pos_after)
	      after_bfd = &(*after_bfd)->next;
	    break;
	  }
    }
  return after_bfd;
}

static void
delete_members (arch, files_to_delete)
     bfd *arch;
     char **files_to_delete;
{
  bfd **current_ptr_ptr;
  boolean found;
  boolean something_changed = false;
  for (; *files_to_delete != NULL; ++files_to_delete)
    {
      /* In a.out systems, the armap is optional.  It's also called
	 __.SYMDEF.  So if the user asked to delete it, we should remember
	 that fact. This isn't quite right for COFF systems (where
	 __.SYMDEF might be regular member), but it's very unlikely
	 to be a problem.  FIXME */

      if (!strcmp (*files_to_delete, "__.SYMDEF"))
	{
	  arch->has_armap = false;
	  write_armap = -1;
	  continue;
	}

      found = false;
      current_ptr_ptr = &(arch->next);
      while (*current_ptr_ptr)
	{
	  if (strcmp (*files_to_delete, (*current_ptr_ptr)->filename) == 0)
	    {
	      found = true;
	      something_changed = true;
	      if (verbose)
		printf ("d - %s\n",
			*files_to_delete);
	      *current_ptr_ptr = ((*current_ptr_ptr)->next);
	      goto next_file;
	    }
	  else
	    {
	      current_ptr_ptr = &((*current_ptr_ptr)->next);
	    }
	}

      if (verbose && found == false)
	{
	  printf ("No member named `%s'\n", *files_to_delete);
	}
    next_file:
      ;
    }

  if (something_changed == true)
    {
      write_archive (arch);
    }
}


/* Reposition existing members within an archive */

static void
move_members (arch, files_to_move)
     bfd *arch;
     char **files_to_move;
{
  bfd **after_bfd;		/* New entries go after this one */
  bfd **current_ptr_ptr;	/* cdr pointer into contents */

  for (; *files_to_move; ++files_to_move)
    {
      current_ptr_ptr = &(arch->next);
      while (*current_ptr_ptr)
	{
	  bfd *current_ptr = *current_ptr_ptr;
	  if (strcmp (normalize (*files_to_move), current_ptr->filename) == 0)
	    {
	      /* Move this file to the end of the list - first cut from
		 where it is.  */
	      bfd *link;
	      *current_ptr_ptr = current_ptr->next;

	      /* Now glue to end */
	      after_bfd = get_pos_bfd (&arch->next, pos_end);
	      link = *after_bfd;
	      *after_bfd = current_ptr;
	      current_ptr->next = link;

	      if (verbose)
		printf ("m - %s\n", *files_to_move);

	      goto next_file;
	    }

	  current_ptr_ptr = &((*current_ptr_ptr)->next);
	}
      fprintf (stderr, "%s: no entry %s in archive %s!\n",
	       program_name, *files_to_move, arch->filename);
      exit (1);
    next_file:;
    }

  write_archive (arch);
}

/* Ought to default to replacing in place, but this is existing practice!  */

static void
replace_members (arch, files_to_move)
     bfd *arch;
     char **files_to_move;
{
  bfd **after_bfd;		/* New entries go after this one */
  bfd *current;
  bfd **current_ptr;
  bfd *temp;

  while (files_to_move && *files_to_move)
    {
      current_ptr = &arch->next;
      while (*current_ptr)
	{
	  current = *current_ptr;

	  if (!strcmp (normalize (*files_to_move), current->filename))
	    {
	      if (newer_only)
		{
		  struct stat fsbuf, asbuf;

		  if (current->arelt_data == NULL)
		    {
		      /* This can only happen if you specify a file on the
			 command line more than once. */
		      fprintf (stderr,
			       "%s: duplicate file specified: %s -- skipping\n",
			       program_name, *files_to_move);
		      goto next_file;
		    }

		  if (stat (*files_to_move, &fsbuf) != 0)
		    {
		      if (errno != ENOENT)
			bfd_fatal (*files_to_move);
		      goto next_file;
		    }
		  if (bfd_stat_arch_elt (current, &asbuf) != 0)
		    fatal ("internal stat error on %s", current->filename);

		  if (fsbuf.st_mtime <= asbuf.st_mtime)
		    goto next_file;
		}

	      /* snip out this entry from the chain */
	      *current_ptr = current->next;

	      after_bfd = get_pos_bfd (&arch->next, pos_end);
	      temp = *after_bfd;
	      *after_bfd = bfd_openr (*files_to_move, NULL);
	      if (*after_bfd == (bfd *) NULL)
		{
		  bfd_fatal (*files_to_move);
		}
	      (*after_bfd)->next = temp;

	      if (verbose)
		{
		  printf ("%c - %s\n", (postype == pos_after ? 'r' : 'a'),
			  *files_to_move);
		}
	      goto next_file;
	    }
	  current_ptr = &(current->next);
	}

      /* It isn't in there, so add to end */

      after_bfd = get_pos_bfd (&arch->next, pos_end);
      temp = *after_bfd;
      *after_bfd = bfd_openr (*files_to_move, NULL);
      if (*after_bfd == (bfd *) NULL)
	{
	  bfd_fatal (*files_to_move);
	}
      if (verbose)
	{
	  printf ("c - %s\n", *files_to_move);
	}

      (*after_bfd)->next = temp;

    next_file:;

      files_to_move++;
    }

  write_archive (arch);
}

static void
ranlib_only (archname)
     const char *archname;
{
  bfd *arch;

  write_armap = 1;
  arch = open_inarch (archname);
  if (arch == NULL)
    exit (1);
  write_archive (arch);
}

/* Update the timestamp of the symbol map of an archive.  */

static void
ranlib_touch (archname)
     const char *archname;
{
#ifdef __GO32__
  /* I don't think updating works on go32.  */
  ranlib_only (archname);
#else
  int f;
  bfd *arch;

  f = open (archname, O_RDWR, 0);
  if (f < 0)
    {
      bfd_set_error (bfd_error_system_call);
      bfd_fatal (archname);
    }

  arch = bfd_fdopenr (archname, (const char *) NULL, f);
  if (arch == NULL
      || ! bfd_check_format (arch, bfd_archive))
    bfd_fatal (archname);

  bfd_update_armap_timestamp (arch);

  if (! bfd_close (arch))
    bfd_fatal (archname);
#endif
}

/* Things which are interesting to map over all or some of the files: */

static void
print_descr (abfd)
     bfd *abfd;
{
  print_arelt_descr (stdout, abfd, verbose);
}