darling-gdb/gdb/ser-go32.c
Steve Chamberlain 08c0d7b84f * ser-go32.c: Lint. (strncasecmp): Removed, now in libiberty.
(go32_readchar): Special handling for faster polling. (async
	structure): Volatile.
	* h8300-tdep.c (print_register_hook): Allocate and use the right
	number bytes for the raw register.
	* h8500-tdep.c (regoff, frame_find_saved_reg, examine_prologue):
	deleted. (h8500_register_size, h8500_register_virtual_type, ):
	Use new way of counting registers.
	* remote-e7000.c (echo_index): deleted. (expect): Better handling
	of user interrupts. (expect_prompt): Remove never used log file
	support. (want, want_nopc): Add support for H8/300H.
	(fetch_regs_from_dump): Treat \r and \n as whitespace.
	(e7000_drain): Send an "end" command before waiting for output to
	stop.  (e7000_wait): Cope with H8/300H, better handling of user
	interrupts.  (why_stop, expect_n, sub2_from_pc): New function.
	* remote-utils.c (gr_load_image): call fflush and QUIT more regularly.
	* utils.c (notice_quit): New function for polling for user interrupts.
1993-12-12 00:00:53 +00:00

366 lines
6.7 KiB
C

/* Remote serial interface for local (hardwired) serial ports for GO32.
Copyright 1992, 1993 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "serial.h"
#include <sys/dos.h>
/* This is unused for now. We just return a placeholder. */
struct go32_ttystate
{
int bogus;
};
typedef struct
{
short jmp_op;
short signature;
short version;
short buffer_start;
short buffer_end;
short getp;
short putp;
short iov;
}
ASYNC_STRUCT;
static int go32_open PARAMS ((serial_t scb, const char *name));
static void go32_raw PARAMS ((serial_t scb));
static int go32_readchar PARAMS ((serial_t scb, int timeout));
static int go32_setbaudrate PARAMS ((serial_t scb, int rate));
static int go32_write PARAMS ((serial_t scb, const char *str, int len));
static void go32_close PARAMS ((serial_t scb));
static serial_ttystate go32_get_tty_state PARAMS ((serial_t scb));
static int go32_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
static char *aptr PARAMS ((short p));
static ASYNC_STRUCT *getivec PARAMS ((int which));
static int dos_async_init PARAMS ((int port));
static void dos_async_tx PARAMS ((const char c));
static int dos_async_rx PARAMS (());
static int dosasync_read PARAMS ((int fd, char *buf, int len, int timeout));
static int dosasync_write PARAMS ((int fd, const char *buf, int len));
#define SIGNATURE 0x4154
#define VERSION 1
#define OFFSET 0x104
#define peek(a,b) (*(unsigned short *)(0xe0000000 + (a)*16 + (b)))
static volatile ASYNC_STRUCT *async;
static int iov;
#define com_rb iov
#define com_tb iov
#define com_ier iov+1
#define com_ifr iov+2
#define com_bfr iov+3
#define com_mcr iov+4
#define com_lsr iov+5
#define com_msr iov+6
static char *
aptr (p)
short p;
{
return (char *) ((unsigned) async - OFFSET + p);
}
static ASYNC_STRUCT *
getivec (int which)
{
ASYNC_STRUCT *a;
if (peek (0, which * 4) != OFFSET)
return 0;
a = (ASYNC_STRUCT *) (0xe0000000 + peek (0, which * 4 + 2) * 16 + peek (0, which * 4));
if (a->signature != SIGNATURE)
return 0;
if (a->version != VERSION)
return 0;
return a;
}
static int
dos_async_init (port)
int port;
{
switch (port)
{
case 1:
async = getivec (12);
break;
case 2:
async = getivec (11);
break;
default:
return 0;
}
if (!async)
{
error ("GDB cannot connect to asynctsr program, check that it is installed\n\
and that serial I/O is not being redirected (perhaps by NFS)\n\n\
example configuration:\n\
C> mode com%d:9600,n,8,1,p\n\
C> asynctsr %d\n\
C> gdb \n", port, port);
}
iov = async->iov;
outportb (com_ier, 0x0f);
outportb (com_bfr, 0x03);
outportb (com_mcr, 0x0b);
async->getp = async->putp = async->buffer_start;
return 1;
}
static void
dos_async_tx (c)
const char c;
{
while (~inportb (com_lsr) & 0x20)
;
outportb (com_tb, c);
}
#define dos_async_ready() (async->getp != async->putp)
static int
dos_async_rx ()
{
char rv;
while (!dos_async_ready ())
{
if (kbhit ())
{
printf_unfiltered ("abort!\n");
return 0;
}
}
rv = *aptr (async->getp++);
if (async->getp >= async->buffer_end)
async->getp = async->buffer_start;
return rv;
}
static int
dosasync_read (fd, buf, len, timeout)
int fd;
char *buf;
int len;
int timeout;
{
long now, then;
int i;
time (&now);
then = now + timeout;
for (i = 0; i < len; i++)
{
if (timeout)
{
while (!dos_async_ready ())
{
time (&now);
if (now >= then)
return i;
}
}
*buf++ = dos_async_rx ();
}
return len;
}
static int
dosasync_write (fd, buf, len)
int fd;
const char *buf;
int len;
{
int l;
for (l = 0; l < len; l++)
dos_async_tx (*buf++);
return len;
}
static int
go32_open (scb, name)
serial_t scb;
const char *name;
{
int port;
if (strncasecmp (name, "com", 3) != 0)
{
errno = ENOENT;
return -1;
}
port = name[3] - '0';
if ((port != 1) && (port != 2))
{
errno = ENOENT;
return -11;
}
scb->fd = dos_async_init (port);
if (!scb->fd)
return -1;
return 0;
}
static int
go32_noop (scb)
serial_t scb;
{
return 0;
}
static void
go32_raw (scb)
serial_t scb;
{
/* Always in raw mode */
}
static int
go32_readchar (scb, timeout)
serial_t scb;
int timeout;
{
char buf;
/* Shortcut for polling */
if (timeout == 0)
{
if (dos_async_ready ())
{
return dos_async_rx ();
}
return SERIAL_TIMEOUT;
}
if (dosasync_read (scb->fd, &buf, 1, timeout))
return buf;
else
return SERIAL_TIMEOUT;
}
/* go32_{get set}_tty_state() are both dummys to fill out the function
vector. Someday, they may do something real... */
static serial_ttystate
go32_get_tty_state (scb)
serial_t scb;
{
struct go32_ttystate *state;
state = (struct go32_ttystate *) xmalloc (sizeof *state);
return (serial_ttystate) state;
}
static int
go32_set_tty_state (scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
return 0;
}
static int
go32_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
serial_t scb;
serial_ttystate new_ttystate;
serial_ttystate old_ttystate;
{
return 0;
}
static void
go32_print_tty_state (scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
/* Nothing to print. */
return;
}
static int
go32_setbaudrate (scb, rate)
serial_t scb;
int rate;
{
return 0;
}
static int
go32_write (scb, str, len)
serial_t scb;
const char *str;
int len;
{
dosasync_write (scb->fd, str, len);
return 0;
}
static void
go32_close (scb)
serial_t scb;
{
}
static struct serial_ops go32_ops =
{
"hardwire",
0,
go32_open,
go32_close,
go32_readchar,
go32_write,
go32_noop, /* flush output */
go32_noop, /* flush input */
go32_noop, /* send break -- currently used only for nindy */
go32_raw,
go32_get_tty_state,
go32_set_tty_state,
go32_print_tty_state,
go32_noflush_set_tty_state,
go32_setbaudrate,
};
void
_initialize_ser_go32 ()
{
serial_add_interface (&go32_ops);
}