mirror of
https://github.com/darlinghq/darling-gdb.git
synced 2024-12-01 16:35:04 +00:00
cd10c7e388
around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
651 lines
21 KiB
C
651 lines
21 KiB
C
/* Print in infix form a struct expression.
|
|
Copyright (C) 1986, 1989, 1991 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
|
|
|
|
#include "defs.h"
|
|
#include "symtab.h"
|
|
#include "gdbtypes.h"
|
|
#include "expression.h"
|
|
#include "value.h"
|
|
#include "language.h"
|
|
#include "parser-defs.h"
|
|
|
|
/* Prototypes for local functions */
|
|
|
|
static void
|
|
print_subexp PARAMS ((struct expression *, int *, GDB_FILE *, enum precedence));
|
|
|
|
void
|
|
print_expression (exp, stream)
|
|
struct expression *exp;
|
|
GDB_FILE *stream;
|
|
{
|
|
int pc = 0;
|
|
print_subexp (exp, &pc, stream, PREC_NULL);
|
|
}
|
|
|
|
/* Print the subexpression of EXP that starts in position POS, on STREAM.
|
|
PREC is the precedence of the surrounding operator;
|
|
if the precedence of the main operator of this subexpression is less,
|
|
parentheses are needed here. */
|
|
|
|
static void
|
|
print_subexp (exp, pos, stream, prec)
|
|
register struct expression *exp;
|
|
register int *pos;
|
|
GDB_FILE *stream;
|
|
enum precedence prec;
|
|
{
|
|
register unsigned tem;
|
|
register const struct op_print *op_print_tab;
|
|
register int pc;
|
|
unsigned nargs;
|
|
register char *op_str;
|
|
int assign_modify = 0;
|
|
enum exp_opcode opcode;
|
|
enum precedence myprec = PREC_NULL;
|
|
/* Set to 1 for a right-associative operator. */
|
|
int assoc = 0;
|
|
value_ptr val;
|
|
char *tempstr = NULL;
|
|
|
|
op_print_tab = exp->language_defn->la_op_print_tab;
|
|
pc = (*pos)++;
|
|
opcode = exp->elts[pc].opcode;
|
|
switch (opcode)
|
|
{
|
|
/* Common ops */
|
|
|
|
case OP_SCOPE:
|
|
myprec = PREC_PREFIX;
|
|
assoc = 0;
|
|
fputs_filtered (type_name_no_tag (exp->elts[pc + 1].type), stream);
|
|
fputs_filtered ("::", stream);
|
|
nargs = longest_to_int (exp->elts[pc + 2].longconst);
|
|
(*pos) += 4 + BYTES_TO_EXP_ELEM (nargs + 1);
|
|
fputs_filtered (&exp->elts[pc + 3].string, stream);
|
|
return;
|
|
|
|
case OP_LONG:
|
|
(*pos) += 3;
|
|
value_print (value_from_longest (exp->elts[pc + 1].type,
|
|
exp->elts[pc + 2].longconst),
|
|
stream, 0, Val_no_prettyprint);
|
|
return;
|
|
|
|
case OP_DOUBLE:
|
|
(*pos) += 3;
|
|
value_print (value_from_double (exp->elts[pc + 1].type,
|
|
exp->elts[pc + 2].doubleconst),
|
|
stream, 0, Val_no_prettyprint);
|
|
return;
|
|
|
|
case OP_VAR_VALUE:
|
|
{
|
|
struct block *b;
|
|
(*pos) += 3;
|
|
b = exp->elts[pc + 1].block;
|
|
if (b != NULL
|
|
&& BLOCK_FUNCTION (b) != NULL
|
|
&& SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)) != NULL)
|
|
{
|
|
fputs_filtered (SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)), stream);
|
|
fputs_filtered ("::", stream);
|
|
}
|
|
fputs_filtered (SYMBOL_SOURCE_NAME (exp->elts[pc + 2].symbol), stream);
|
|
}
|
|
return;
|
|
|
|
case OP_LAST:
|
|
(*pos) += 2;
|
|
fprintf_filtered (stream, "$%d",
|
|
longest_to_int (exp->elts[pc + 1].longconst));
|
|
return;
|
|
|
|
case OP_REGISTER:
|
|
(*pos) += 2;
|
|
fprintf_filtered (stream, "$%s",
|
|
reg_names[longest_to_int (exp->elts[pc + 1].longconst)]);
|
|
return;
|
|
|
|
case OP_BOOL:
|
|
(*pos) += 2;
|
|
fprintf_filtered (stream, "%s",
|
|
longest_to_int (exp->elts[pc + 1].longconst)
|
|
? "TRUE" : "FALSE");
|
|
return;
|
|
|
|
case OP_INTERNALVAR:
|
|
(*pos) += 2;
|
|
fprintf_filtered (stream, "$%s",
|
|
internalvar_name (exp->elts[pc + 1].internalvar));
|
|
return;
|
|
|
|
case OP_FUNCALL:
|
|
(*pos) += 2;
|
|
nargs = longest_to_int (exp->elts[pc + 1].longconst);
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered (" (", stream);
|
|
for (tem = 0; tem < nargs; tem++)
|
|
{
|
|
if (tem != 0)
|
|
fputs_filtered (", ", stream);
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
}
|
|
fputs_filtered (")", stream);
|
|
return;
|
|
|
|
case OP_NAME:
|
|
case OP_EXPRSTRING:
|
|
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
return;
|
|
|
|
case OP_STRING:
|
|
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
|
|
/* LA_PRINT_STRING will print using the current repeat count threshold.
|
|
If necessary, we can temporarily set it to zero, or pass it as an
|
|
additional parameter to LA_PRINT_STRING. -fnf */
|
|
LA_PRINT_STRING (stream, &exp->elts[pc + 2].string, nargs, 0);
|
|
return;
|
|
|
|
case OP_BITSTRING:
|
|
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
|
|
(*pos)
|
|
+= 3 + BYTES_TO_EXP_ELEM ((nargs + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT);
|
|
fprintf (stream, "B'<unimplemented>'");
|
|
return;
|
|
|
|
case OP_ARRAY:
|
|
(*pos) += 3;
|
|
nargs = longest_to_int (exp->elts[pc + 2].longconst);
|
|
nargs -= longest_to_int (exp->elts[pc + 1].longconst);
|
|
nargs++;
|
|
tem = 0;
|
|
if (exp->elts[pc + 4].opcode == OP_LONG
|
|
&& exp->elts[pc + 5].type == builtin_type_char
|
|
&& exp->language_defn->la_language == language_c)
|
|
{
|
|
/* Attempt to print C character arrays using string syntax.
|
|
Walk through the args, picking up one character from each
|
|
of the OP_LONG expression elements. If any array element
|
|
does not match our expection of what we should find for
|
|
a simple string, revert back to array printing. Note that
|
|
the last expression element is an explicit null terminator
|
|
byte, which doesn't get printed. */
|
|
tempstr = alloca (nargs);
|
|
pc += 4;
|
|
while (tem < nargs)
|
|
{
|
|
if (exp->elts[pc].opcode != OP_LONG
|
|
|| exp->elts[pc + 1].type != builtin_type_char)
|
|
{
|
|
/* Not a simple array of char, use regular array printing. */
|
|
tem = 0;
|
|
break;
|
|
}
|
|
else
|
|
{
|
|
tempstr[tem++] =
|
|
longest_to_int (exp->elts[pc + 2].longconst);
|
|
pc += 4;
|
|
}
|
|
}
|
|
}
|
|
if (tem > 0)
|
|
{
|
|
LA_PRINT_STRING (stream, tempstr, nargs - 1, 0);
|
|
(*pos) = pc;
|
|
}
|
|
else
|
|
{
|
|
int is_chill = exp->language_defn->la_language == language_chill;
|
|
fputs_filtered (is_chill ? " [" : " {", stream);
|
|
for (tem = 0; tem < nargs; tem++)
|
|
{
|
|
if (tem != 0)
|
|
{
|
|
fputs_filtered (", ", stream);
|
|
}
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
}
|
|
fputs_filtered (is_chill ? "]" : "}", stream);
|
|
}
|
|
return;
|
|
|
|
case OP_LABELED:
|
|
tem = longest_to_int (exp->elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
|
|
|
|
if (exp->language_defn->la_language == language_chill)
|
|
{
|
|
fputs_filtered (".", stream);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
fputs_filtered (exp->elts[*pos].opcode == OP_LABELED ? ", "
|
|
: ": ",
|
|
stream);
|
|
}
|
|
else
|
|
{
|
|
/* Gcc support both these syntaxes. Unsure which is preferred. */
|
|
#if 1
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
fputs_filtered (": ", stream);
|
|
#else
|
|
fputs_filtered (".", stream);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
fputs_filtered ("=", stream);
|
|
#endif
|
|
}
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
return;
|
|
|
|
case TERNOP_COND:
|
|
if ((int) prec > (int) PREC_COMMA)
|
|
fputs_filtered ("(", stream);
|
|
/* Print the subexpressions, forcing parentheses
|
|
around any binary operations within them.
|
|
This is more parentheses than are strictly necessary,
|
|
but it looks clearer. */
|
|
print_subexp (exp, pos, stream, PREC_HYPER);
|
|
fputs_filtered (" ? ", stream);
|
|
print_subexp (exp, pos, stream, PREC_HYPER);
|
|
fputs_filtered (" : ", stream);
|
|
print_subexp (exp, pos, stream, PREC_HYPER);
|
|
if ((int) prec > (int) PREC_COMMA)
|
|
fputs_filtered (")", stream);
|
|
return;
|
|
|
|
case TERNOP_SLICE:
|
|
case TERNOP_SLICE_COUNT:
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("(", stream);
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
fputs_filtered (opcode == TERNOP_SLICE ? " : " : " UP ", stream);
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
fputs_filtered (")", stream);
|
|
return;
|
|
|
|
case STRUCTOP_STRUCT:
|
|
tem = longest_to_int (exp->elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered (".", stream);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
return;
|
|
|
|
/* Will not occur for Modula-2 */
|
|
case STRUCTOP_PTR:
|
|
tem = longest_to_int (exp->elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("->", stream);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
return;
|
|
|
|
/* start-sanitize-gm */
|
|
#ifdef GENERAL_MAGIC_HACKS
|
|
case STRUCTOP_FIELD:
|
|
tem = longest_to_int (exp->elts[pc + 1].longconst);
|
|
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("@", stream);
|
|
fputs_filtered (&exp->elts[pc + 2].string, stream);
|
|
return;
|
|
|
|
#endif /* GENERAL_MAGIC_HACKS */
|
|
/* end-sanitize-gm */
|
|
|
|
case BINOP_SUBSCRIPT:
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("[", stream);
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
fputs_filtered ("]", stream);
|
|
return;
|
|
|
|
case UNOP_POSTINCREMENT:
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("++", stream);
|
|
return;
|
|
|
|
case UNOP_POSTDECREMENT:
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered ("--", stream);
|
|
return;
|
|
|
|
case UNOP_CAST:
|
|
(*pos) += 2;
|
|
if ((int) prec > (int) PREC_PREFIX)
|
|
fputs_filtered ("(", stream);
|
|
fputs_filtered ("(", stream);
|
|
type_print (exp->elts[pc + 1].type, "", stream, 0);
|
|
fputs_filtered (") ", stream);
|
|
print_subexp (exp, pos, stream, PREC_PREFIX);
|
|
if ((int) prec > (int) PREC_PREFIX)
|
|
fputs_filtered (")", stream);
|
|
return;
|
|
|
|
case UNOP_MEMVAL:
|
|
(*pos) += 2;
|
|
if ((int) prec > (int) PREC_PREFIX)
|
|
fputs_filtered ("(", stream);
|
|
if (exp->elts[pc + 1].type->code == TYPE_CODE_FUNC &&
|
|
exp->elts[pc + 3].opcode == OP_LONG) {
|
|
/* We have a minimal symbol fn, probably. It's encoded
|
|
as a UNOP_MEMVAL (function-type) of an OP_LONG (int, address).
|
|
Swallow the OP_LONG (including both its opcodes); ignore
|
|
its type; print the value in the type of the MEMVAL. */
|
|
(*pos) += 4;
|
|
val = value_at_lazy (exp->elts[pc + 1].type,
|
|
(CORE_ADDR) exp->elts[pc + 5].longconst);
|
|
value_print (val, stream, 0, Val_no_prettyprint);
|
|
} else {
|
|
fputs_filtered ("{", stream);
|
|
type_print (exp->elts[pc + 1].type, "", stream, 0);
|
|
fputs_filtered ("} ", stream);
|
|
print_subexp (exp, pos, stream, PREC_PREFIX);
|
|
}
|
|
if ((int) prec > (int) PREC_PREFIX)
|
|
fputs_filtered (")", stream);
|
|
return;
|
|
|
|
case BINOP_ASSIGN_MODIFY:
|
|
opcode = exp->elts[pc + 1].opcode;
|
|
(*pos) += 2;
|
|
myprec = PREC_ASSIGN;
|
|
assoc = 1;
|
|
assign_modify = 1;
|
|
op_str = "???";
|
|
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
|
|
if (op_print_tab[tem].opcode == opcode)
|
|
{
|
|
op_str = op_print_tab[tem].string;
|
|
break;
|
|
}
|
|
if (op_print_tab[tem].opcode != opcode)
|
|
/* Not found; don't try to keep going because we don't know how
|
|
to interpret further elements. */
|
|
error ("Invalid expression");
|
|
break;
|
|
|
|
/* C++ ops */
|
|
|
|
case OP_THIS:
|
|
++(*pos);
|
|
fputs_filtered ("this", stream);
|
|
return;
|
|
|
|
/* Modula-2 ops */
|
|
|
|
case MULTI_SUBSCRIPT:
|
|
(*pos) += 2;
|
|
nargs = longest_to_int (exp->elts[pc + 1].longconst);
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fprintf_unfiltered (stream, " [");
|
|
for (tem = 0; tem < nargs; tem++)
|
|
{
|
|
if (tem != 0)
|
|
fprintf_unfiltered (stream, ", ");
|
|
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
|
|
}
|
|
fprintf_unfiltered (stream, "]");
|
|
return;
|
|
|
|
case BINOP_VAL:
|
|
(*pos)+=2;
|
|
fprintf_unfiltered(stream,"VAL(");
|
|
type_print(exp->elts[pc+1].type,"",stream,0);
|
|
fprintf_unfiltered(stream,",");
|
|
print_subexp(exp,pos,stream,PREC_PREFIX);
|
|
fprintf_unfiltered(stream,")");
|
|
return;
|
|
|
|
case BINOP_INCL:
|
|
case BINOP_EXCL:
|
|
error("print_subexp: Not implemented.");
|
|
|
|
/* Default ops */
|
|
|
|
default:
|
|
op_str = "???";
|
|
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
|
|
if (op_print_tab[tem].opcode == opcode)
|
|
{
|
|
op_str = op_print_tab[tem].string;
|
|
myprec = op_print_tab[tem].precedence;
|
|
assoc = op_print_tab[tem].right_assoc;
|
|
break;
|
|
}
|
|
if (op_print_tab[tem].opcode != opcode)
|
|
/* Not found; don't try to keep going because we don't know how
|
|
to interpret further elements. For example, this happens
|
|
if opcode is OP_TYPE. */
|
|
error ("Invalid expression");
|
|
}
|
|
|
|
/* Note that PREC_BUILTIN will always emit parentheses. */
|
|
if ((int) myprec < (int) prec)
|
|
fputs_filtered ("(", stream);
|
|
if ((int) opcode > (int) BINOP_END)
|
|
{
|
|
if (assoc)
|
|
{
|
|
/* Unary postfix operator. */
|
|
print_subexp (exp, pos, stream, PREC_SUFFIX);
|
|
fputs_filtered (op_str, stream);
|
|
}
|
|
else
|
|
{
|
|
/* Unary prefix operator. */
|
|
fputs_filtered (op_str, stream);
|
|
if (myprec == PREC_BUILTIN_FUNCTION)
|
|
fputs_filtered ("(", stream);
|
|
print_subexp (exp, pos, stream, PREC_PREFIX);
|
|
if (myprec == PREC_BUILTIN_FUNCTION)
|
|
fputs_filtered (")", stream);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Binary operator. */
|
|
/* Print left operand.
|
|
If operator is right-associative,
|
|
increment precedence for this operand. */
|
|
print_subexp (exp, pos, stream,
|
|
(enum precedence) ((int) myprec + assoc));
|
|
/* Print the operator itself. */
|
|
if (assign_modify)
|
|
fprintf_filtered (stream, " %s= ", op_str);
|
|
else if (op_str[0] == ',')
|
|
fprintf_filtered (stream, "%s ", op_str);
|
|
else
|
|
fprintf_filtered (stream, " %s ", op_str);
|
|
/* Print right operand.
|
|
If operator is left-associative,
|
|
increment precedence for this operand. */
|
|
print_subexp (exp, pos, stream,
|
|
(enum precedence) ((int) myprec + !assoc));
|
|
}
|
|
|
|
if ((int) myprec < (int) prec)
|
|
fputs_filtered (")", stream);
|
|
}
|
|
|
|
/* Return the operator corresponding to opcode OP as
|
|
a string. NULL indicates that the opcode was not found in the
|
|
current language table. */
|
|
char *
|
|
op_string(op)
|
|
enum exp_opcode op;
|
|
{
|
|
int tem;
|
|
register const struct op_print *op_print_tab;
|
|
|
|
op_print_tab = current_language->la_op_print_tab;
|
|
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
|
|
if (op_print_tab[tem].opcode == op)
|
|
return op_print_tab[tem].string;
|
|
return NULL;
|
|
}
|
|
|
|
#ifdef DEBUG_EXPRESSIONS
|
|
|
|
/* Support for dumping the raw data from expressions in a human readable
|
|
form. */
|
|
|
|
void
|
|
dump_expression (exp, stream, note)
|
|
struct expression *exp;
|
|
GDB_FILE *stream;
|
|
char *note;
|
|
{
|
|
int elt;
|
|
char *opcode_name;
|
|
char *eltscan;
|
|
int eltsize;
|
|
|
|
fprintf_filtered (stream, "Dump of expression @ ");
|
|
gdb_print_address (exp, stream);
|
|
fprintf_filtered (stream, ", %s:\n", note);
|
|
fprintf_filtered (stream, "\tLanguage %s, %d elements, %d bytes each.\n",
|
|
exp->language_defn->la_name, exp -> nelts,
|
|
sizeof (union exp_element));
|
|
fprintf_filtered (stream, "\t%5s %20s %16s %s\n", "Index", "Opcode",
|
|
"Hex Value", "String Value");
|
|
for (elt = 0; elt < exp -> nelts; elt++)
|
|
{
|
|
fprintf_filtered (stream, "\t%5d ", elt);
|
|
switch (exp -> elts[elt].opcode)
|
|
{
|
|
default: opcode_name = "<unknown>"; break;
|
|
case OP_NULL: opcode_name = "OP_NULL"; break;
|
|
case BINOP_ADD: opcode_name = "BINOP_ADD"; break;
|
|
case BINOP_SUB: opcode_name = "BINOP_SUB"; break;
|
|
case BINOP_MUL: opcode_name = "BINOP_MUL"; break;
|
|
case BINOP_DIV: opcode_name = "BINOP_DIV"; break;
|
|
case BINOP_REM: opcode_name = "BINOP_REM"; break;
|
|
case BINOP_MOD: opcode_name = "BINOP_MOD"; break;
|
|
case BINOP_LSH: opcode_name = "BINOP_LSH"; break;
|
|
case BINOP_RSH: opcode_name = "BINOP_RSH"; break;
|
|
case BINOP_LOGICAL_AND: opcode_name = "BINOP_LOGICAL_AND"; break;
|
|
case BINOP_LOGICAL_OR: opcode_name = "BINOP_LOGICAL_OR"; break;
|
|
case BINOP_BITWISE_AND: opcode_name = "BINOP_BITWISE_AND"; break;
|
|
case BINOP_BITWISE_IOR: opcode_name = "BINOP_BITWISE_IOR"; break;
|
|
case BINOP_BITWISE_XOR: opcode_name = "BINOP_BITWISE_XOR"; break;
|
|
case BINOP_EQUAL: opcode_name = "BINOP_EQUAL"; break;
|
|
case BINOP_NOTEQUAL: opcode_name = "BINOP_NOTEQUAL"; break;
|
|
case BINOP_LESS: opcode_name = "BINOP_LESS"; break;
|
|
case BINOP_GTR: opcode_name = "BINOP_GTR"; break;
|
|
case BINOP_LEQ: opcode_name = "BINOP_LEQ"; break;
|
|
case BINOP_GEQ: opcode_name = "BINOP_GEQ"; break;
|
|
case BINOP_REPEAT: opcode_name = "BINOP_REPEAT"; break;
|
|
case BINOP_ASSIGN: opcode_name = "BINOP_ASSIGN"; break;
|
|
case BINOP_COMMA: opcode_name = "BINOP_COMMA"; break;
|
|
case BINOP_SUBSCRIPT: opcode_name = "BINOP_SUBSCRIPT"; break;
|
|
case MULTI_SUBSCRIPT: opcode_name = "MULTI_SUBSCRIPT"; break;
|
|
case BINOP_EXP: opcode_name = "BINOP_EXP"; break;
|
|
case BINOP_MIN: opcode_name = "BINOP_MIN"; break;
|
|
case BINOP_MAX: opcode_name = "BINOP_MAX"; break;
|
|
case BINOP_SCOPE: opcode_name = "BINOP_SCOPE"; break;
|
|
case STRUCTOP_MEMBER: opcode_name = "STRUCTOP_MEMBER"; break;
|
|
case STRUCTOP_MPTR: opcode_name = "STRUCTOP_MPTR"; break;
|
|
case BINOP_INTDIV: opcode_name = "BINOP_INTDIV"; break;
|
|
case BINOP_ASSIGN_MODIFY: opcode_name = "BINOP_ASSIGN_MODIFY"; break;
|
|
case BINOP_VAL: opcode_name = "BINOP_VAL"; break;
|
|
case BINOP_INCL: opcode_name = "BINOP_INCL"; break;
|
|
case BINOP_EXCL: opcode_name = "BINOP_EXCL"; break;
|
|
case BINOP_CONCAT: opcode_name = "BINOP_CONCAT"; break;
|
|
case BINOP_END: opcode_name = "BINOP_END"; break;
|
|
case TERNOP_COND: opcode_name = "TERNOP_COND"; break;
|
|
case TERNOP_SLICE: opcode_name = "TERNOP_SLICE"; break;
|
|
case TERNOP_SLICE_COUNT: opcode_name = "TERNOP_SLICE_COUNT"; break;
|
|
case OP_LONG: opcode_name = "OP_LONG"; break;
|
|
case OP_DOUBLE: opcode_name = "OP_DOUBLE"; break;
|
|
case OP_VAR_VALUE: opcode_name = "OP_VAR_VALUE"; break;
|
|
case OP_LAST: opcode_name = "OP_LAST"; break;
|
|
case OP_REGISTER: opcode_name = "OP_REGISTER"; break;
|
|
case OP_INTERNALVAR: opcode_name = "OP_INTERNALVAR"; break;
|
|
case OP_FUNCALL: opcode_name = "OP_FUNCALL"; break;
|
|
case OP_STRING: opcode_name = "OP_STRING"; break;
|
|
case OP_BITSTRING: opcode_name = "OP_BITSTRING"; break;
|
|
case OP_ARRAY: opcode_name = "OP_ARRAY"; break;
|
|
case UNOP_CAST: opcode_name = "UNOP_CAST"; break;
|
|
case UNOP_MEMVAL: opcode_name = "UNOP_MEMVAL"; break;
|
|
case UNOP_NEG: opcode_name = "UNOP_NEG"; break;
|
|
case UNOP_LOGICAL_NOT: opcode_name = "UNOP_LOGICAL_NOT"; break;
|
|
case UNOP_COMPLEMENT: opcode_name = "UNOP_COMPLEMENT"; break;
|
|
case UNOP_IND: opcode_name = "UNOP_IND"; break;
|
|
case UNOP_ADDR: opcode_name = "UNOP_ADDR"; break;
|
|
case UNOP_PREINCREMENT: opcode_name = "UNOP_PREINCREMENT"; break;
|
|
case UNOP_POSTINCREMENT: opcode_name = "UNOP_POSTINCREMENT"; break;
|
|
case UNOP_PREDECREMENT: opcode_name = "UNOP_PREDECREMENT"; break;
|
|
case UNOP_POSTDECREMENT: opcode_name = "UNOP_POSTDECREMENT"; break;
|
|
case UNOP_SIZEOF: opcode_name = "UNOP_SIZEOF"; break;
|
|
case UNOP_LOWER: opcode_name = "UNOP_LOWER"; break;
|
|
case UNOP_UPPER: opcode_name = "UNOP_UPPER"; break;
|
|
case UNOP_LENGTH: opcode_name = "UNOP_LENGTH"; break;
|
|
case UNOP_PLUS: opcode_name = "UNOP_PLUS"; break;
|
|
case UNOP_CAP: opcode_name = "UNOP_CAP"; break;
|
|
case UNOP_CHR: opcode_name = "UNOP_CHR"; break;
|
|
case UNOP_ORD: opcode_name = "UNOP_ORD"; break;
|
|
case UNOP_ABS: opcode_name = "UNOP_ABS"; break;
|
|
case UNOP_FLOAT: opcode_name = "UNOP_FLOAT"; break;
|
|
case UNOP_HIGH: opcode_name = "UNOP_HIGH"; break;
|
|
case UNOP_MAX: opcode_name = "UNOP_MAX"; break;
|
|
case UNOP_MIN: opcode_name = "UNOP_MIN"; break;
|
|
case UNOP_ODD: opcode_name = "UNOP_ODD"; break;
|
|
case UNOP_TRUNC: opcode_name = "UNOP_TRUNC"; break;
|
|
case OP_BOOL: opcode_name = "OP_BOOL"; break;
|
|
case OP_M2_STRING: opcode_name = "OP_M2_STRING"; break;
|
|
case STRUCTOP_STRUCT: opcode_name = "STRUCTOP_STRUCT"; break;
|
|
case STRUCTOP_PTR: opcode_name = "STRUCTOP_PTR"; break;
|
|
/* start-sanitize-gm */
|
|
#ifdef GENERAL_MAGIC_HACKS
|
|
+ case STRUCTOP_FIELD: opcode_name = "STRUCTOP_FIELD"; break;
|
|
#endif /* GENERAL_MAGIC_HACKS */
|
|
/* end-sanitize-gm */
|
|
case OP_THIS: opcode_name = "OP_THIS"; break;
|
|
case OP_SCOPE: opcode_name = "OP_SCOPE"; break;
|
|
case OP_TYPE: opcode_name = "OP_TYPE"; break;
|
|
case OP_LABELED: opcode_name = "OP_LABELED"; break;
|
|
}
|
|
fprintf_filtered (stream, "%20s ", opcode_name);
|
|
fprintf_filtered (stream,
|
|
#if defined (PRINTF_HAS_LONG_LONG)
|
|
"%ll16x ",
|
|
#else
|
|
"%l16x ",
|
|
#endif
|
|
exp -> elts[elt].longconst);
|
|
|
|
for (eltscan = (char *) &exp->elts[elt],
|
|
eltsize = sizeof (union exp_element) ;
|
|
eltsize-- > 0;
|
|
eltscan++)
|
|
{
|
|
fprintf_filtered (stream, "%c",
|
|
isprint (*eltscan) ? (*eltscan & 0xFF) : '.');
|
|
}
|
|
fprintf_filtered (stream, "\n");
|
|
}
|
|
}
|
|
|
|
#endif /* DEBUG_EXPRESSIONS */
|