remove kartdlphax

_data/navigation/en_US.yml

@@ -103,9 +103,6 @@ sidebar_pages:
   -
     title: Installing boot9strap (super-skaterhax)
     url: installing-boot9strap-(super-skaterhax)
-  -
-    title: Installing boot9strap (kartdlphax)
-    url: installing-boot9strap-(kartdlphax)
   -
     title: Finalizing Setup
     url: finalizing-setup

_pages/en_US/get-started.txt

@@ -43,6 +43,5 @@ If possible, you should follow the method given by the prompt above.
 
 Otherwise, methods that work on all versions are available, but require additional hardware:
 
-1. [kartdlphax](installing-boot9strap-(kartdlphax)) - requires a second hacked 3DS and a copy of Mario Kart 7
 1. [ntrboot](ntrboot) - requires compatible DS flashcart
 1. [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod)) - requires soldering

_pages/en_US/installing-boot9strap-(kartdlphax).txt

@@ -1,141 +0,0 @@
----
-title: "Installing boot9strap (kartdlphax)"
----
-
-{% include toc title="Table of Contents" %}
-
-{% capture technical_info %}
-<summary><em>Technical Details (optional)</em></summary>
-
-In order to install custom firmware on our console, we need to get Homebrew Launcher access.
-
-To accomplish this, we can use the Download Play functionality of the game Mario Kart 7, using a 3DS with custom firmware already installed along with a custom game plugin.
-
-This custom plugin will send a hacked payload to an unhacked console, which then exploits the system in order to inject menuhax67, which will allow us to get Homebrew Launcher access.
-
-Once we have Homebrew Launcher access, we can run nimdsphax to install boot9strap.
-
-See [here](https://github.com/PabloMK7/kartdlphax) for information about kartdlphax, [here](https://github.com/zoogie/menuhax67) for information about menuhax67, and [here](https://github.com/luigoalma/nimdsphax) for information about nimdsphax.
-
-{% endcapture %}
-<details>{{ technical_info | markdownify }}</details>
-{: .notice--info}
-
-### Compatibility Notes
-
-In order to follow these instructions, you will need the following:
-
-+ A second 3DS with custom firmware (the **source 3DS**) that is the same region as the 3DS you are trying to modify (the **target 3DS**)
-    + The consoles must be USA, JPN, or EUR region consoles
-    + The source 3DS can be [region changed](region-changing) to match the target 3DS if necessary
-+ A physical or digital copy of Mario Kart 7 that is the same region as both consoles
-+ An SD card for both consoles
-
-### What You Need
-
-* The latest release of [kartdlphax](https://github.com/PabloMK7/kartdlphax/releases/latest) (`plugin.3gx`)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip) (direct download)
-* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip) (direct download)
-* The latest release of [nimdsphax](https://github.com/luigoalma/nimdsphax/releases/download/v1.0/nimdsphax_v1.0.zip) (direct download)
-* The latest release of [menuhax67](https://github.com/zoogie/menuhax67/releases/latest)
-* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) (the Luma3DS `.zip` file)
-
-#### Section I - Prep Work (source 3DS)
-
-In this section, you will set up your source 3DS (the 3DS with custom firmware) for delivery of the exploit data to the target 3DS.
-
-1. Insert the SD card of your **source 3DS** in your computer
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of the **source 3DS**'s SD card, replacing any existing file
-    + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-1. Copy kartdlphax's `plugin.3gx` to the following directory on the **source 3DS**'s SD card, depending on the **region of your copy of Mario Kart 7**:
-    + USA: `/luma/plugins/0004000000030800`
-    + EUR: `/luma/plugins/0004000000030700`
-    + JPN: `/luma/plugins/0004000000030600`
-    + Create the `plugins` and `00040000...` folders if they do not already exist
-1. Eject the SD card and put it in the **source 3DS**
-
-#### Section II - Prep Work (target 3DS)
-
-In this section, you will set up the files that the target 3DS will need to install custom firmware.
-
-1. Insert the SD card of your **target 3DS** in your computer
-1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of the **target 3DS's** SD card
-1. Create a folder named `boot9strap` on the root of your SD card
-1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
-1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
-1. Create a folder named `3ds` on the root of your SD card if it does not already exist
-    + This folder stores homebrew applications and data; it is different from the `Nintendo 3DS` folder that the console automatically generates
-1. Copy the `nimdsphax` folder from the nimdsphax `.zip` to the `/3ds/` folder on your SD card
-1. Copy `menuhax67_installer.3dsx` from the menuhax `.zip` to the `/3ds/` folder on your SD card
-1. Copy Launcher.dat from the folder for your model and region inside the menuhax `.zip` to the root of your SD card
-1. Eject the SD card and put it in the **target 3DS**
-
-![]({{ "/images/screenshots/kart-root-layout.png" | absolute_url }})
-{: .notice--info}
-
-![]({{ "/images/screenshots/kart-3ds-layout.png" | absolute_url }})
-{: .notice--info}
-
-#### Section III - kartdlphax
-
-In this section, you will use Download Play to transfer the exploit data from the source 3DS to the target 3DS, which can be used to install menuhax67, a Homebrew Launcher entrypoint. Your HOME Menu settings will be temporarily inaccessible on the target 3DS while this exploit is active.
-
-1. Power on the **source 3DS**
-    + If you are prompted to set up Luma3DS, just press START to save the configuration
-1. Once in the HOME Menu, press (Left Shoulder) + (Down D-Pad) + (Select) to bring up the Rosalina menu
-1. Select "Enable plugin loader"
-1. Press (B) to exit the Rosalina menu
-1. Launch Mario Kart 7
-    + Ensure that wireless connectivity is enabled
-1. Navigate to `Local Multiplayer`. A menu should pop up
-    + If the screen freezes, hold the power button for fifteen seconds to force power off your console, then try again
-    + If you have launched kartdlphax previously, the last selected settings will be loaded. If they are correct, select `Use settings` and skip the next 3 steps. If they are incorrect, select `Change settings` and proceed.
-1. Select your **target 3DS** console type (Old 3DS family or New 3DS family)
-1. Select the following exploit type depending on your system version:
-    + 11.16.0: select `xPloitInjector (11.16)`
-    + 11.17.0: select `xPloitInjector (11.17)`
-1. A confirmation menu will show up. If the settings shown on the top screen are correct, select `Use settings`
-    + If the settings are not correct, press `Change settings` and modify them accordingly
-1. Select `Create Group`
-    + If the source 3DS freezes at this point and you are using a cartridge, try [installing the cartridge to the system](dumping-titles-and-game-cartridges#installing-a-game-cartridge-directly-to-the-system)
-1. Power on the **target 3DS**
-    + Ensure that wireless connectivity is enabled
-1. On the **target 3DS**, open the Download Play application (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"}), then select "Nintendo 3DS"
-1. Join the group created by the **source 3DS**
-1. Select "Start" on the **source 3DS** once it has detected the **target 3DS**
-1. Once multiplayer has loaded, navigate to `Grand Prix` -> `50cc` -> (any driver) -> `Mushroom Cup` -> `OK`
-1. Wait a while (a percentage should be displayed on the **source 3DS**)
-1. If the exploit was successful, the **target 3DS** will have booted into the 3DS ROP xPloit Injector
-    + If the exploit was not successful, power off the **source 3DS** and **target 3DS** and start again from the beginning of `Section III - kartdlphax`
-
-#### Section IV - Installing menuhax67
-
-1. Press (Y) + (D-Pad Down) to install menuhax67
-    + The console will automatically power off
-1. Power on your console
-1. Tap on the small HOME Menu settings icon in the top left of the bottom screen (![]({{ "/images/homemenuicon.png" | absolute_url }}){: height="32px" width="52px"})
-    + If the console freezes for a while and then crashes, make sure you have Launcher.dat on the root of your SD card
-1. If the exploit was successful, your console will have booted into the Homebrew Launcher
-1. Launch nimdsphax from the list of homebrew
-1. If the exploit was successful, you will have booted into SafeB9SInstaller
-    + If your console freezes on a red screen, hold the POWER button until it turns off, then try running menuhax again by powering on your console and tapping on the HOME Menu settings icon
-
-#### Section V - Installing boot9strap
-
-{% include_relative include/install-boot9strap-safeb9sinstaller.txt %}
-{%- include_relative include/configure-luma3ds.txt %}
-
-#### Section VI - Removing menuhax67
-
-In this section, you will use the Homebrew Launcher to remove menuhax67, which will let you access the HOME Menu Settings option normally.
-
-{% include_relative include/launch-hbl-dlp.txt %}
-1. Launch menuhax67_installer from the list of homebrew
-1. Select REMOVE menuhax67
-1. When you see "done.", press (A), then press (A) on "EXIT to menu"
-
-{% include_relative include/luma3ds-installed-note.txt %}
-___
-
-### Continue to [Finalizing Setup](finalizing-setup)
-{: .notice--primary}

_pages/en_US/site-navigation.txt

@@ -40,7 +40,6 @@ sitemap: false
 + [H2testw (Windows)](h2testw-(windows))
 + [Home](/)
 + [Installing boot9strap (Hardmod)](installing-boot9strap-(hardmod))
-+ [Installing boot9strap (kartdlphax)](installing-boot9strap-(kartdlphax))
 + [Installing boot9strap (MSET9)](installing-boot9strap-(mset9))
 + [Installing boot9strap (MSET9 CLI)](installing-boot9strap-(mset9-cli))
 + [Installing boot9strap (MSET9 Play Store)](installing-boot9strap-(mset9-play-store))

assets/js/_main.js

@@ -209,13 +209,12 @@ $(document).ready(function() {
     "flashing-ntrboot-(dsi)": "5",
     "flashing-ntrboot-(nds)": "6",
     "installing-boot9strap-(hardmod)": "7",
-    "installing-boot9strap-(kartdlphax)": "8",
-	  "installing-boot9strap-(mset9)": "9",
-    "installing-boot9strap-(ssloth-browser)": "10",
-    "installing-boot9strap-(safecerthax)": "11",
-    "installing-boot9strap-(super-skaterhax)": "12",
-    "installing-boot9strap-(mset9-play-store)": "13",
-    "installing-boot9strap-(mset9-cli)": "14"
+	  "installing-boot9strap-(mset9)": "8",
+    "installing-boot9strap-(ssloth-browser)": "9",
+    "installing-boot9strap-(safecerthax)": "10",
+    "installing-boot9strap-(super-skaterhax)": "11",
+    "installing-boot9strap-(mset9-play-store)": "12",
+    "installing-boot9strap-(mset9-cli)": "13"
   };
 
   for(var device in devices){
@@ -255,13 +254,12 @@ $(document).ready(function() {
       "5": ["ntrboot", "flashing-ntrboot-(dsi)", "installing-boot9strap-(ntrboot)", "finalizing-setup"],
       "6": ["ntrboot", "flashing-ntrboot-(nds)", "installing-boot9strap-(ntrboot)", "finalizing-setup"],
       "7": ["installing-boot9strap-(hardmod)", "finalizing-setup"],
-      "8": ["installing-boot9strap-(kartdlphax)", "finalizing-setup"],
-	    "9": ["installing-boot9strap-(mset9)", "finalizing-setup"],
-      "10": ["installing-boot9strap-(ssloth-browser)", "finalizing-setup"],
-      "11": ["installing-boot9strap-(safecerthax)", "finalizing-setup"],
-      "12": ["installing-boot9strap-(super-skaterhax)", "finalizing-setup"],
-      "13": ["installing-boot9strap-(mset9-play-store)", "finalizing-setup"],
-      "14": ["installing-boot9strap-(mset9-cli)", "finalizing-setup"]
+	    "8": ["installing-boot9strap-(mset9)", "finalizing-setup"],
+      "9": ["installing-boot9strap-(ssloth-browser)", "finalizing-setup"],
+      "10": ["installing-boot9strap-(safecerthax)", "finalizing-setup"],
+      "11": ["installing-boot9strap-(super-skaterhax)", "finalizing-setup"],
+      "12": ["installing-boot9strap-(mset9-play-store)", "finalizing-setup"],
+      "13": ["installing-boot9strap-(mset9-cli)", "finalizing-setup"]
     }
     // Can add custom routing if necessary but currently both routes are identical
     var device_old =  Object.assign({}, device_common,{