New Crowdin translations (#1210)

2024-11-24 01:49:52 +00:00 · 2017-06-11 03:01:03 -04:00 · 2017-06-11 03:01:03 -04:00 · 4c25c9917b
commit 4c25c9917b
parent 5381047706
30 changed files with 30 additions and 30 deletions
--- a/_pages/af_ZA/finalizing-setup.txt
+++ b/_pages/af_ZA/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Si obteniu un error, establiu els vostres paràmetres DNS en "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/da_DK/finalizing-setup.txt
+++ b/_pages/da_DK/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Wenn eine Fehlermeldung auftaucht, musst du in den DNS-Einstellungen die Option "Ja" auswählen, wenn du gefragt wirst, ob die DNS automatisch bezogen werden soll
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Εάν αντιμετωπίζετε σφάλμα, ρυθμίστε τις ρυθμίσεις του DNS σε "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jos saat virheen, laita DNS:n automaattinen haku (Auto-Obtain DNS) päälle asetuksista
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@ -80,7 +80,7 @@ Si, avant d'avoir suivi ce guide, vous aviez une installation EmuNAND et que vou
  + Si vous obtenez une erreur, réglez vos paramètres DNS sur "Automatique"
  + Si cela vous donne encore une erreur et que votre NAND est en dessous de 9.2.0, [suivez 9.2.0 CTRTransfer](9.2.0-ctrtransfer), puis essayez de mettre à jour à nouveau
 1. Si votre console était dans un fimware antérieur à 9.0.0 avant la mise à jour, remplacez `boot.firm` à la racine de votre carte SD avec celui de [la dernière version de Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Si votre console était dans un firmware compris entre 3.0.0 et 4.5.0 avant la mise à jour, Supprimez `native.firm` et `cetk` de votre dossier `/luma/`sur votre carte SD
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Lancez FBI

--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@ -80,7 +80,7 @@ title: "סיום התהליך"
  + אם אתם מקבלים שגיאה, שנו את הגדרות ה-DNS שלכם ל-"auto"
  + אם זה ממשיך לתת לכם שגיאה והקונסולה שלכם מתחת לגרסה 9.2.0, עקבו אחרי [9.2.0 CTRtransfer](9.2.0-ctrtransfer), ואז תנסו לעדכן שוב
 1. אם הקונסולה שלכם הייתה מתחת לגרסה 9.0.0 לפני שעדכנתם אותה, תחליפו את ה`boot.firm` על שורש כרטיס הSD שלכם עם זה מ[הגרסה העדכנית של Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. אם הקונסולה שלכם הייתה על גרסה בין 3.0.0 ו4.5.0 לפני שעדכנתם, תמחקו את `native.firm` ואת `cetk` מתיקיית `/luma/` בכרטיס הSD שלכם
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### חלק III - הפעלת FBI

--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + エラーが発生すれば、DNS設定を「自動」に変更してください
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + 오류가 발생한다면, DNS 설정을 "자동"으로 설정해 주세요.
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jika terdapat error, set DNS settings anda ke "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Als dit je een foutmelding geeft, zet dan je DNS instellingen op "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Hvis dette gir deg en feil, sett DNS-innstillingene til "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Jeśli przy próbie aktualizacji pojawia się błąd, ustaw swoje DNS (w ustawieniach połączenia internetowego 3DS) na "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@ -80,7 +80,7 @@ Se, antes de seguir este guia, você já possuia uma instalação EmuNAND e gost
  + Se isso der um erro, defina suas configurações de DNS para "Automático"
  + Se isso ainda lhe dá um erro e sua NAND está abaixo de 9.2.0, [siga CTRTransfer para 9.2.0](9.2.0-ctrtransfer) e, em seguida, tente atualizar novamente
 1. Se seu dispositivo estava em uma versão abaixo da 9.0.0 antes de atualizar, substitua `boot.firm` na raiz do seu cartão SD pelo o da [versão mais recente do Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Se o seu dispositivo estava em uma versão entre 3.0.0 e 4.5.0 antes de atualizar, apague `native.firm` e `cetk` da pasta `/luma/` no seu cartão SD
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Seção III - Iniciando o FBI

--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Se encontrares algum erro, muda as configurações da DNS para "automático"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Dacă aceasta vă da o eroare, setați DNS-ul pe "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@ -80,7 +80,7 @@ title: "Завершение установки"
  + При появлении ошибки, поставьте в настройках подключения, в настройках DNS "Получать DNS автоматически" в положение "Да"
  + Если вы все еще получаете ошибку и версия вашего NAND ниже 9.2.0, [выполните 9.2.0 CTRTransfer](9.2.0-ctrtransfer) и попробуйте обновиться еще раз
 1. Если ваше устройство использовало прошивку версии ниже 9.0.0 до обновления, замените `boot.firm` в корне SD-карты на файл из [свежей версии Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. Если ваше устройство использовало прошивку версии от 3.0.0 до 4.5.0 до обновления, удалите `native.firm` и `cetk` из папки `/luma/` на SD-карте
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Часть III - Запуск FBI

--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + Bu bir hata verirse, DNS ayarlarınızı "otomatik" olarak belirleyin
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  + If this gives you an error, set your DNS settings to "auto"
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI

--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@ -80,7 +80,7 @@ If, before following this guide, you already had an EmuNAND setup and would like
  如果这一步出错，则将DNS设置改为”auto”（自动）
  + If this still gives you an error and your NAND is below 9.2.0, [follow 9.2.0 CTRTransfer](9.2.0-ctrtransfer), then try updating again
 1. If your device was on a version below 9.0.0 before updating, replace `boot.firm` on the root of your SD card with the one from [the latest release of Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-1. If your device was on a version a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card
+1. If your device was on a version between 3.0.0 and 4.5.0 before updating, delete `native.firm` and `cetk` from the `/luma/` folder on your SD card

 ##### Section III - Launching FBI