Guide_3DS/docs/zh_TW/troubleshooting-finalizing-setup.md

Troubleshooting (Finalizing Setup)

This page offers troubleshooting advice for commonly encountered issues with the "Finalizing Setup" page. 如果您無法透過本頁解決你的問題，請加入 Discord 上的 Nintendo Homebrew 伺服器，並以英文敘述你的問題，以及您已經嘗試過的步驟。

Issues with Finalizing Setup

:::details Unable to update console

以下是可以嘗試的解決方法，按從簡單到困難的順序排列。

1. If you are using Pretendo, switch back to Nintendo with Nimbus and try again
2. 將網路設定中的 DNS 位址設定設為『自動 (Auto)』
3. 將主機靠近您的 WiFi 路由器
4. 開機時按住「L」鍵 +「R」鍵 +「上」鍵 +「A」鍵以開機至安全模式中，並遵循所示指示進行更新
5. 將主機中的 WiFi 連線設定清除，並再重新設定一次
6. 重新啟動您的 WiFi 路由器
7. 試著使用其他 WiFi 連線，比如手機的 WiFi 熱點
8. 任天堂伺服器目前可能臨時下線，請稍後再試
9. 如果錯誤持續，請進行 CTRTransfer，並再試一次
10. 請至 Discord 的 Nintendo Homebrew 伺服器中尋求協助 (英文)。

:::

:::details Error #22: finalize.romfs is invalid

The file finalize.romfs is corrupt or unreadable. Re-download it and copy it to the root of the SD card, replacing any existing copy, then try again.

:::

:::details Information #23: finalize.romfs in wrong location

The file finalize.romfs was placed in the wrong location instead of root of SD. The script will attempt to resolve this, but requires your permission to do so. Press (A) on the next few prompts to continue.

:::

:::details Error #24: SD is write-protected

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

:::

:::details Error #02: Missing essential.exefs

You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.

:::

:::details Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:

1. Power off your console
2. 將 SD 卡插入至電腦中
3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
4. Delete the Nintendo 3DS folder from the SD card
5. Reinsert your SD card into your console
6. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
7. Press the (Home) button
8. 選擇『Scripts...』
9. Select "finalize"
10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
11. Press (A) again
    • The console should automatically power off
12. 將 SD 卡插入至電腦中
13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
15. Copy the Nintendo 3DS folder from your computer to the root of your SD card
16. Delete the Nintendo 3DS folder from your computer

Now that you have your NAND backup in a safe place:

1. Reinsert your SD card into your console
2. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
3. Press the (Home) button
4. 選擇『Scripts...』
5. Select "finalize"
6. Continue the script as normal
   • The NAND backup will be automatically skipped

:::

:::details Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

:::

:::details Error #06 or "Error: Could not open directory" when attempting a NAND backup

Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:

1. Power off your console
2. 將 SD 卡插入至電腦中
3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
4. Delete the Nintendo 3DS folder from the SD card
5. Reinsert your SD card into your console
6. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
7. Perform a NAND Backup
8. Copy the files in gm9/out on your SD to a safe location on your computer
9. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card, keeping essential.exefs in /gm9/out/
10. Copy the Nintendo 3DS folder from your computer to the root of your SD card
11. Delete the Nintendo 3DS folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer's operating system: Windows, Linux, macOS.

:::

:::details Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

:::

:::details Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

1. Press (B) to cancel making another NAND backup
2. Hold (R) and press (Start) at the same time to power off your console
3. Copy the contents of /gm9/backups/ to a safe location on your computer
4. Delete /gm9/backups/ from your SD card
5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
   • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
6. Press and hold (Start), and while holding (Start), power on your console. 這將會啟動 GodMode9
7. 按『Home』鍵以叫出主選單
8. 選擇『Scripts...』
9. Select "finalize"
10. Follow the prompts in the script, answering any questions that you are asked

:::

:::details Error #18a/18b: MSET9 detected

You didn't remove MSET9 on the previous page. The script will attempt to remove MSET9 for you; follow the instructions given by the script.

:::

---

::: tip

Go back to Finalizing Setup

:::