hacks-guide/Guide_3DS
1
0
Fork 0
mirror of https://github.com/hacks-guide/Guide_3DS.git synced 2024-11-23 09:29:51 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
remove-ctr-no-timeoffset
Guide_3DS/docs/ms_MY/troubleshooting.md
TophattedWasTaken 959504d3e1
treewide: replace all images with the new locations 
i feel like a god
2024-09-29 01:05:43 -07:00

36 KiB
Raw Permalink Blame History

Troubleshooting

This page offers troubleshooting advice for commonly encountered issues. If you are unable to solve your issue with the advice on this page, please join Nintendo Homebrew on Discord and describe your issue, including what you have already tried.

:::details Table of Contents

Used on multiple pages:

Guide pages:

Issues after installation:

:::

Issues with SafeB9SInstaller

Before opening SafeB9SInstaller

:::details Failed to open SafeB9SInstaller.bin

The file SafeB9SInstaller.bin is missing or misplaced. Download the latest release of SafeB9SInstaller, extract it, and place SafeB9SInstaller.bin on the root of your SD card. Do not add the .bin extension if you do not already see it.

:::

SigHaxed FIRM was not installed! Check lower screen for more info.

:::details MicroSD Card - init failed

Your SD card is most likely acting weird. Try reformatting your SD card (Windows, macOS, Linux). If this doesn't work, try another SD card.

:::

:::details SigHaxed FIRM - File not found

You are missing boot9strap.firm and boot9strap.firm.sha from the boot9strap folder, or the boot9strap folder is misnamed. Download the latest release of boot9strap, and place boot9strap.firm and boot9strap.firm.sha in the boot9strap folder.

:::

:::details SigHaxed FIRM - invalid FIRM

There is an issue with your boot9strap.firm and boot9strap.firm.sha files. Re-download the latest release of boot9strap, and place boot9strap.firm and boot9strap.firm.sha in the boot9strap folder.

:::

:::details Secret Sector - File not found

You are missing secret_sector.bin from the boot9strap folder, or the boot9strap folder is misnamed. Download secret_sector.bin using a torrent client, and place it in the boot9strap folder.

:::

:::details Something else

Join Nintendo Homebrew on Discord for assistance, and describe the message that you see.

:::

Installing boot9strap (Soundhax)

:::details Red/purple/pink and white screen after running Soundhax

If your console is on system version 9.4.0, 9.5.0, or 9.6.0, you may be encountering a bug with an old version of universal-otherapp. Download the latest version from here.

If your console is not on those firmwares, it likely indicates that you already have custom firmware. You should check for CFW.

:::

:::details "An error has occurred, forcing the software to close..." (white message box)

There is an issue with your otherapp.bin file (it is missing, misplaced, or corrupted). Download the latest release of universal-otherapp and place it on the root of your SD card.

:::

:::details "Could not play"

You have the wrong Soundhax file for your console and region, or your console is incompatible with Soundhax. In the latter case, your course of action will determine on what version your 3DS is currently on. Join Nintendo Homebrew on Discord for assistance.

:::

:::details Failed to mount the SD card!

If this is unsuccessful, try using another SD card.

:::

Installing boot9strap (MSET9)

:::details Python 3 is not installed

Python is not installed on the computer you are using. Download it from the Python website, double-click the installer, and follow the prompts to install Python. Once Python is installed, try again.

:::

:::details HOME Menu extdata: Missing!

Please power on your console with your SD inserted, then check the MSET9 status again.

If this does not work, your SD card needs to be formatted:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  4. Start again from Section I Step 7

:::

:::details Mii Maker extdata: Missing!

Mii Maker data was not found on the SD card. Please power on your console with your SD inserted, then launch Mii Maker, then check the MSET9 status again.

If this does not work, your SD card needs to be formatted:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  4. Start again from Section I Step 8.

:::

:::details Title database: Not initialized!

Ensure that you have reset the title database.

  • Please power on your console with your SD inserted
  • Launch System Settings and navigate to Data Management -> Nintendo 3DS -> Software -> Reset (image)
    • This will not wipe any of your data
  • If you get a reset prompt, after resetting, power off your console and start again from Section I Step 14

If you do not getting a reset prompt, your SD card needs to be formatted:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  1. Type the number corresponding to your console model and version, then press Enter
  2. Type 2 then press enter to check the MSET9 status
    • This will create the dummy databases again
  3. Close the MSET9 script window
  4. Start again from Section I Step 12.

:::

:::: details Error 01: Couldn't find Nintendo 3DS folder

You are not running MSET9 from the root of the SD card, or the SD card is missing the Nintendo 3DS folder.

Remember, your SD card should look like this:

::: info

:::

If your SD card layout is correct, then your SD card most likely isn't being read by your console and needs to be formatted:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  4. Start again from the beginning of Section I

::::

:::details Error 02: Your SD is write protected

Write-protection is enabled on this SD card. If you are using a full-size SD card, ensure that the lock is flipped in the upright position. Otherwise, try ejecting and reinserting your SD card.

:::

:::details Error 04: You don't have 1 ID0, you have (#)!

You have multiple ID0 folders. To determine the correct folder, follow these instructions:

  1. Rename the Nintendo 3DS folder to BACKUP_Nintendo 3DS
  2. Reinsert your SD card into your console
  3. Power on your console
  4. Wait for the console to generate the SD card data
    • Your applications will have disappeared. This is normal and will be resolved shortly
  5. Power off your console
  6. Pasang kad SD anda ke dalam komputer
  7. Navigate to the Nintendo 3DS folder on your SD card
  8. Write down the first few characters of the folder you see
    • This is your true ID0, which we will keep in the real Nintendo 3DS folder
  9. Delete the ID0 from the current Nintendo 3DS folder
  10. Move the true ID0 folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder
  11. If it exists, move the Private folder from the BACKUP_Nintendo 3DS folder to the Nintendo 3DS folder

Once you've done this, continue from Section I Step 3.

:::

:::: details Error 05: You don't have 1 ID1, you have (#)!

::::

:::details Error 06: You need at least 16MB free

Your SD card does not have enough space to trigger MSET9. Free up some space and try again.

At the end of this guide, you will need at least 1.3GB to make a NAND backup, so it's best to free up at least that much.

:::

:::details Error 07: One or more files are missing or malformed!

One or more files that MSET9 needs to run is missing or corrupted. Re-download the MSET9 Release .zip and extract it to the root of your SD card, replacing all existing files, then try again.

:::

:::details Error 18: Windows Locale Settings are broken!

:::

:::details Red screen after reinserting SD card (Section II Step 11)

You may be missing SafeB9S.bin from the root of your SD card, or the file may be corrupted. Copy it from the MSET9 .zip, replacing any existing files then follow these instructions to remove the trigger file:

  1. Force power off your console by holding the Power button for 20 seconds
  2. Pasang kad SD anda ke dalam komputer
  1. Type the number corresponding to your console model and version, then press Enter
    • The current state should display Injected
    • If you have already removed the trigger file (or never injected in the first place), the current state will show Ready, and you may retry Section II
  2. Type 4, then press Enter
  3. Once the window says "Removed trigger file", type 0 and then press Enter
  4. Reinsert the SD card into your console
  5. Power on your console
  6. Return to Section II Step 1

Alternatively, your SD card may be improperly formatted or partitioned. After removing the trigger file, format it:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  4. Start again from from Section II Step 1

:::

:::details System Settings loading infinitely after reinserting the SD card

You most likely did something different from the MSET9 instructions, selected the wrong model/version, or your SD card needs to be formatted. Ensure you are choosing the correct model and firmware version when opening the script.

Follow these instructions to remove the trigger file and to retry Section II:

  1. Force power off your console by holding the Power button for 20 seconds
  2. Pasang kad SD anda ke dalam komputer
  1. Type the number corresponding to your console model and version, then press Enter
    • The current state should display Injected
    • If you have already removed the trigger file (or never injected in the first place), the current state will show Ready, and you are ready to retry Section II
  2. Type 4, then press Enter
  3. Once the window says "Removed trigger file", type 0 and then press Enter
  4. Reinsert the SD card into your console
  5. Power on your console
  6. Return to Section II Step 1

If you continue to have this issue and are sure that you did everything correctly, ensure the trigger file is removed and format your SD card:

  1. Copy everything off the SD Card to your PC
  2. Format the SD Card (Windows, Linux, macOS)
  3. Copy everything back
  4. Start again from from Section II Step 1

:::

:::details An exception occurred after triggering MSET9

This likely indicates that you already have custom firmware. You should check for CFW.

:::

Installing boot9strap (super-skaterhax)

:::details "An error has occurred. Please save your data in any software currently in use, then restart the system."

If no colors flash after pressing "GO GO!":

  • Ensure that you have set your system date and region correctly
  • Ensure that no other browser tabs are open, then restart the browser and try the exploit again

If the screen flashes colors then freezes/crashes:

  • Ensure that you have the correct copy of arm11code.bin and browserhax_hblauncher_ropbin_payload.bin for your console's version and region
  • Try resetting your browser data:
    1. Launch the browser, then launch the browser settings
    2. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
    3. Try the exploit again
  • Try changing the system language to something other than the current language

:::

:::: details "An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Make sure to copy the files of the latest version of super-skaterhax for your region and version to the root of your SD card (not inside of a folder).

::: info

:::

::::

:::details An exception occured or "DLL_HEAP_INFORMATION" when pressing GO! GO!

This likely indicates that you already have custom firmware. You should check for CFW.

:::

Installing boot9strap (SSLoth-Browser)

:::details Red/purple/pink and white screen after running Browserhax

This likely indicates that you already have custom firmware. You should check for CFW.

:::

:::details "An error has occurred. Hold down the POWER button to turn off the power..." (black screen with text)

The file arm11code.bin is missing or misplaced. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. Do not add the .bin extension if you do not already see it.

:::

:::details "An error has occurred, forcing the software to close..." (white message box)

There may be an issue with your arm11code.bin file. Download the latest release of universal-otherapp, place otherapp.bin on the root of your SD card and rename it to arm11code.bin. Do not add the .bin extension if you do not already see it.

You can also try resetting your browser save data:

  1. Launch the browser, then launch the browser settings
  2. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
  3. Try the exploit again

:::

:::details Opening the browserhax QR code or URL crashes

Browser based exploits (such as this one) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps.

  1. Launch the browser, then launch the browser settings
  2. Scroll to the bottom and select "Reset Save Data" (it may also be called "Initialize Save Data" or "Clear All Save Data")
  3. Try the exploit again

:::

:::details System Update prompt when opening browser

The SSLoth proxy was incorrectly configured. Re-do the SSLoth section on the page.

:::

:::details Error 032-0420 when opening browser

Follow these steps in order:

  1. Launch System Settings on your console
  2. Navigate to Internet Settings -> Connection Settings
  3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
  4. Set "Proxy Settings" to "No"
  5. Click OK, then click Save
  6. When prompted, click "Test" to perform the connection test
    • The test should succeed
  7. Click "OK" to continue
  8. Press "Back" twice, then "Close" to go back to the HOME Menu
  9. Open the Internet Browser once
  10. If prompted about a system update, press OK
    • This won't actually update the system
  11. Start again from Section II

:::

:::details Frozen on "Doing agbhax..."

There may be an issue with your arm11code.bin file. Re-download the latest release of universal-otherapp, place it on the root of your SD card, and rename it to arm11code.bin. Do not add the .bin extension if you do not already see it.

:::

:::details "PrepareArm9ForTwl returned error c8804631!"

Join Nintendo Homebrew on Discord for assistance.

:::

:::details Failed to mount the SD card!

Back up your data and reformat your SD card as FAT32 with the recommended tool depending on your operating system (Windows, macOS, Linux). MiniTool Partition Wizard and the HP formatting tool (HPUSBDisk) are known to cause issues with 3DS SD cards.

If this is unsuccessful, try using another SD card.

:::

Finalizing Setup

:::details Unable to update console

The steps below can be attempted in any order, but are listed from easiest to hardest to perform.

  1. If you are using Pretendo, switch back to Nintendo with Nimbus and try again
  2. Set your DNS settings to "Auto"
  3. Move closer to your WiFi router
  4. Update from Safe Mode by turning off the console, holding (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A) on boot, and following the on-screen prompts
  5. Delete your WiFi connection, then reconnect to your WiFi again
  6. Reboot your WiFi router
  7. Connect to a different WiFi connection, like a mobile hotspot
  8. Nintendo servers may be down; Try again later
  9. If you still get an error, follow CTRTransfer, then try again
  10. For further support (in English), join Nintendo Homebrew on Discord

:::

:::details Error #22: finalize.romfs is invalid

The file finalize.romfs is corrupt or unreadable. Re-download it and copy it to the root of the SD card, replacing any existing copy, then try again.

:::

:::details Information #23: finalize.romfs in wrong location

The file finalize.romfs was placed in the wrong location instead of root of SD. The script will attempt to resolve this, but requires your permission to do so. Press (A) on the next few prompts to continue.

:::

:::details Error #24: SD is write-protected

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

:::

:::details Error #02: Missing essential.exefs

You said 'No' to the "Make essential files backup?" prompt in GodMode9. Power off your console, power it on while holding (Start) to re-enter GodMode9, say 'Yes' to the prompt, then try again.

:::

:::details Error #04: No space

You need at least 1.3GB of free space to perform the NAND backup, which is a part of the script. If you don't have enough space, follow these steps:

  1. Power off your console
  2. Pasang kad SD anda ke dalam komputer
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Press the (Home) button
  8. Select "Scripts..."
  9. Select "finalize"
  10. Press (A) to create a NAND backup
    • This may take around fifteen minutes
  11. Press (A) again
    • The console should automatically power off
  12. Pasang kad SD anda ke dalam komputer
  13. Copy the files in /gm9/backups/ on your SD to a safe location on your computer
  14. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card
  15. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  16. Delete the Nintendo 3DS folder from your computer

Now that you have your NAND backup in a safe place:

  1. Reinsert your SD card into your console
  2. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  3. Press the (Home) button
  4. Select "Scripts..."
  5. Select "finalize"
  6. Continue the script as normal
    • The NAND backup will be automatically skipped

:::

:::details Information #05: No title database

Press (A) to import a title database, unlock SysNAND writing by entering the buttons on-screen, then continue the script as normal.

:::

:::details Error #06 or "Error: Could not open directory" when attempting a NAND backup

Make sure you have at least 1.3GB available in your SD card. If you don't have enough space, follow these steps:

  1. Power off your console
  2. Pasang kad SD anda ke dalam komputer
  3. Copy the Nintendo 3DS folder from the root of your SD card to your computer
  4. Delete the Nintendo 3DS folder from the SD card
  5. Reinsert your SD card into your console
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Perform a NAND Backup
  8. Copy the files in gm9/out on your SD to a safe location on your computer
  9. Delete the <date>_<serialnumber>_sysnand_##.bin and <date>_<serialnumber>_sysnand_##.bin.sha files from the SD card, keeping essential.exefs in /gm9/out/
  10. Copy the Nintendo 3DS folder from your computer to the root of your SD card
  11. Delete the Nintendo 3DS folder from your computer

If you have enough space on your SD card, your SD might be corrupted or faulty. Check your SD card for any errors by following the guide according to your computer's operating system: Windows, Linux, macOS.

:::

:::details Error #12: Copy (file).db fail

Ensure that your SD card is not locked. If the SD card is not locked and you continue to get this error, join Nintendo Homebrew on Discord for assistance.

:::

:::details Information #17: Duplicate NAND backup

The script has detected that the Nintendo 3DS folder is missing AND that you have already made a NAND backup before. If you intend to install homebrew applications, you should do the following:

  1. Press (B) to cancel making another NAND backup
  2. Hold (R) and press (Start) at the same time to power off your console
  3. Copy the contents of /gm9/backups/ to a safe location on your computer
  4. Delete /gm9/backups/ from your SD card
  5. If you moved your Nintendo 3DS folder off of your SD card to get to this point, copy it back to your SD card
    • If you do not have a Nintendo 3DS folder, boot into the HOME Menu at least once with the SD card inserted to automatically generate it
  6. Press and hold (Start), and while holding (Start), power on your console. This will launch GodMode9
  7. Press (Home) to bring up the action menu
  8. Select "Scripts..."
  9. Select "finalize"
  10. Follow the prompts in the script, answering any questions that you are asked

:::

:::details Error #18a/18b: MSET9 detected

You didn't remove MSET9 on the previous page. The script will attempt to remove MSET9 for you; follow the instructions given by the script.

:::

Boot issues on consoles with custom firmware

::: info

The steps detailed here generally assume that your console has a modern custom firmware setup (boot9strap + Luma3DS 8.0 or greater). If your console is running an older homebrew setup (for example, something based on arm9loaderhax or menuhax), you should update your setup before trying these instructions.

:::

Power/notification light indicators

:::details My console powers off when I try to turn it on, and/or the notification LED shows a color on boot

There is an issue with your boot.firm file. If you're running boot9strap 1.4, your 3DS notification LED may flash a certain color. This color is used to diagnose issues involving your boot.firm file on SD card or internal memory. On older versions of boot9strap, the blue light will power off almost immediately when trying to turn on the console.

If the notification LED flashes:

  • White: Your 3DS was not able to find boot.firm on your SD card or on internal memory.
  • Magenta: Your 3DS was not able to find boot.firm on your SD card. It was able to find boot.firm on internal memory, but the file is corrupted.
  • Red: Your 3DS was able to find boot.firm on both your SD card and on internal memory, but both files are corrupted.

You can get a new boot.firm file by downloading the latest release of Luma3DS, extracting it, and placing boot.firm on the root of your SD card. If your boot.firm file is consistently being detected as corrupted, you may want to check your SD card for errors (Windows, Linux, or macOS). Also, note that the 3DS tends to have issues with files extracted using WinRAR.

If you hear a "popping sound", potentially accompanied with the backlight turning on for a split second, there is a hardware issue with your console (such as a disconnected backlight cable). You may be able to get your console to boot by holding it at certain angles.

:::

:::details My console gets stuck on a black screen with blue power light staying on

The steps below can be attempted in any order, but are listed from least to most time-consuming.

  1. Power off your console, remove the SD card, re-insert it, then power on your console.
  2. Power off your console, eject the game cartridge if inserted, power on your console, then wait up to ten minutes. If your console boots within ten minutes, the issue has been fixed and is unlikely to reoccur
  3. Rename the Nintendo 3DS folder on your SD card to Nintendo 3DS_BACKUP, then attempt to boot. If your console successfully boots, there is some issue within your Nintendo 3DS folder. Try clearing HOME Menu extdata:
    • Navigate to /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/
    • Delete the corresponding folder for your 3DS region:
      • EUR Region: 00000098
      • JPN Region: 00000082
      • USA Region: 0000008f
      • CHN Region: 000000A1
      • KOR Region: 000000A9
      • TWN Region: 000000B1
  4. Try booting into recovery mode and updating your system:
    • Power off your console
    • Hold (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A)
    • Power on your console
    • If you were successful, the console will boot to an "update your system" screen
  5. Follow the CTRTransfer guide
  6. For further support, ask for help at Nintendo Homebrew on Discord

:::

Error message on boot

:::details "An error has occurred: Failed to apply 1 FIRM patch(es)" or "An exception has occurred -- Current process: pm"

Your Luma3DS version is outdated. Download the latest release of Luma3DS and place boot.firm on the root of your SD card, replacing any existing file. Make sure you are extracting the ZIP file with any tool other than WinRAR, as it is known to cause issues with 3DS-related files.

:::

:::details "Unable to mount CTRNAND or load the CTRNAND FIRM. Please use an external one."

There are a number of reasons as to why this could be happening. In any case, this error can usually be fixed by following the CTRTransfer guide.

:::

:::details "An error has occurred. Hold down the POWER button to turn off the power..."

ARM11 exception handlers are disabled, or custom firmware is not installed. Try enabling ARM11 exception handlers:

  • Power off your console
  • Hold (Select)
  • Power on your console, while still holding (Select)
  • If the "Disable ARM11 exception handlers" box is checked, uncheck it

:::

:::details HOME Menu is missing installed applications

This could be caused by various reasons, but most likely because your SD card is not being read by the system. You can check if your SD is being read by holding SELECT on boot and checking the yellow text on the bottom screen; if it says "Booted from CTRNAND via B9S", then your console is booting from the internal memory and not from the SD card. If this is the case, attempt the steps below, which are listed from easiest to hardest:

  1. Power off your console, remove the SD card, re-insert it, then power on your console
  2. Power off your console, remove the SD card, insert it on your computer, download the latest release of Luma3DS, extract boot.firm from the Luma3DS.zip and place it on the root of your SD card (replacing any existing file)
  3. Power off your console, remove the SD card, insert it on your computer and reformat your SD card according to your computer's operating system: Windows, macOS, Linux (this will wipe your SD card data)
  4. Test your SD card for errors by following the guide according to your computer's operating system: Windows, Linux, macOS. If your SD card is marked as faulty, then you will have to replace your SD card
  5. Your SD card slot may be broken. Join Nintendo Homebrew on Discord for further assistance

:::

:::details Blue "BOOTROM ERROR" screen

Your console is likely hard-bricked. You will need to buy an ntrboot flashcart to reinstall boot9strap in order to attempt to fix your console. This may also indicate a hardware issue that cannot be fixed. In any case, join Nintendo Homebrew on Discord for assistance. + It is also possible that someone has set a boot-time splash screen that just looks like a brick. Try leaving your console powered on, waiting on the blue screen, for five minutes.

:::

:::details Some other error

Please take a photo of the error and join Nintendo Homebrew on Discord for assistance.

:::

Software issues on consoles with custom firmware

:::details DSi / DS functionality is broken or has been replaced with Flipnote Studio

  1. Download the latest release of TWLFix-CFW (the .3dsx file)
  2. Power off your console
  3. Create a folder named 3ds on the root of your SD card if it does not already exist
  4. Copy TWLFix-CFW.3dsx to the /3ds/ folder on your SD card
  5. Reinsert your SD card into your console
  6. Open the Homebrew Launcher
  7. Launch TWLFix-CFW from the list of homebrew
  8. Press (A) to uninstall the broken TWL titles
  9. Press (Start) to reboot the console
  10. Update your console by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
    • The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them
  11. Once the update is complete, tap "OK" to reboot the console

:::

:::details GBA Virtual Console and/or Safe Mode functionality is broken

Your console is running Luma3DS 6.6 or older, likely via arm9loaderhax. You should follow A9LH to B9S to update your console to a modern custom firmware environment.

:::

:::details Extended memory mode games (Pokemon Sun/Moon, Smash, etc.) don't work

This can occur after a CTRTransfer or region change on Old 3DS / 2DS. Follow the instructions here to fix this issue (skipping steps 3, 4, 5, and 6).

:::

:::details Exception screen when booting/loading an application

Look for your exception screen in this page. If you weren't able to find your error or the instructions didn't work, join Nintendo Homebrew on Discord for further assistance.

:::

:::details Opening the HOME Menu settings crashes the console or loads the Homebrew Launcher

Your console likely still has menuhax67 installed. To uninstall menuhax67, download the latest release of menuhax67 (the menuhax .zip), then follow the "Uninstall menuhax67" section here.

:::

Other troubleshooting

:::details Clear HOME Menu extdata

  1. Power off your console
  2. Pasang kad SD anda ke dalam komputer
  3. Navigate to the /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ folder on your SD card
  4. Delete the corresponding folder for your 3DS region:
    • EUR Region: 00000098
    • JPN Region: 00000082
    • USA Region: 0000008f
    • CHN Region: 000000A1
    • KOR Region: 000000A9
    • TWN Region: 000000B1
  5. Reinsert your SD card into your console

:::

:::details Clear HOME Menu theme data

  1. Power off your console
  2. Pasang kad SD anda ke dalam komputer
  3. Navigate to the /Nintendo 3DS/<ID0>/<ID1>/extdata/00000000/ folder on your SD card
  4. Delete the corresponding folder for your 3DS region:
    • EUR Region: 000002ce
    • JPN Region: 000002cc
    • USA Region: 000002cd
    • KOR Region: 000002cf
  5. Reinsert your SD card into your console

:::

:::details Manually entering Homebrew Launcher

If you are missing the Homebrew Launcher application from your HOME Menu, you can follow these instructions to manually enter the Homebrew Launcher. (You will need boot.3dsx and boot.firm on the root of your SD card.)

:::

:::details Turning off Parental Controls

You can disable the Parental Controls feature by going to System Settings -> Parental Controls and inserting the PIN, then pressing "Clear Settings", then "Delete" to remove it. However, if you do not know the PIN and therefore cannot access the console's settings, you will need to disable it. In order to do this, you need to obtain your console's master key (mkey):

  1. Go to this website
  2. Fill the following boxes with the information:
    • Device Type: Select "3DS" (the same applies if you are using a 2DS, New 3DS (XL/LL) or New 2DS (XL/LL))
    • System Date: The day and month your console's clock is set to
    • Inquiry Number: Can be obtained by pressing "Forgot PIN" then "I Forgot" in the Parental Controls screen
  3. After you have obtained your mkey, press OK on the screen you have obtained your Inquiry Number, then input the master key
  4. Press "Clear Settings", then "Delete" to remove all Parental Controls data

:::