mirror of
https://github.com/hacks-guide/Guide_3DS.git
synced 2024-11-27 11:20:34 +00:00
64 lines
3.1 KiB
Plaintext
64 lines
3.1 KiB
Plaintext
---
|
|
title: "Flashing ntrboot (3DS Multi System)"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot)
|
|
|
|
Note that R4i Gold 3DS RTS flashcarts will not be able to be used for their standard functions (such as launching `.nds` files) while the ntrboot exploit is installed on it. This does not apply to the Acekard 2i.
|
|
|
|
There are optional steps at the end of the ntrboot boot9strap installation instructions to remove the ntrboot exploit from your flashcart when you are done.
|
|
|
|
This method requires temporary access to a second 3DS family device that is already running some kind of custom firmware (such as boot9strap or arm9loaderhax). It is compatible with the following flashcarts:
|
|
|
|
+ [Acekard 2i](http://www.nds-card.com/ProShow.asp?ProID=160)
|
|
+ [R4i Gold 3DS RTS](http://www.nds-card.com/ProShow.asp?ProID=149)
|
|
|
|
Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
|
|
{: .notice--danger}
|
|
|
|
### What you need
|
|
|
|
* Your ntrboot compatible flashcart
|
|
* Two 3DS family devices
|
|
+ **The source 3DS**: the 3DS family device that is already running boot9strap
|
|
+ **The target 3DS**: the device on stock firmware
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
|
|
* The latest release of [ntrboot_flasher](https://github.com/kitling/ntrboot_flasher/releases/latest)
|
|
|
|
### Instructions
|
|
|
|
#### Section I - Prep Work
|
|
|
|
1. Power off **the source 3DS**
|
|
1. Insert **the source 3DS**'s SD card into your computer
|
|
1. Create a folder named `ntrboot` on the root of your SD card
|
|
1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
|
|
1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
|
|
1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
|
|
1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
|
|
|
|
#### Section II - Flashing ntrboot
|
|
|
|
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
|
|
1. Select "ntrboot_flasher"
|
|
1. Read the red screen warning
|
|
1. Press (A) to continue
|
|
1. Select your flashcart
|
|
+ If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option
|
|
1. Select "Dump Flash"
|
|
1. Wait until the process is completed
|
|
1. Press (A) to continue
|
|
1. Press (A) to return to the main menu
|
|
1. Select "Inject Ntrboot"
|
|
1. Press (A) for retail unit ntrboot
|
|
1. Wait until the process is completed
|
|
1. Press (A) to return to the main menu
|
|
1. Select "Exit" to power off **the source 3DS**
|
|
|
|
___
|
|
|
|
Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
|
|
{: .notice--primary}
|