mirror of
https://github.com/hacks-guide/Guide_3DS.git
synced 2024-11-23 17:39:43 +00:00
67 lines
2.6 KiB
Plaintext
67 lines
2.6 KiB
Plaintext
---
|
|
title: "Formatting SD (Windows)"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
### Required Reading
|
|
|
|
This is an add-on section for formatting an SD card to work with the 3DS.
|
|
|
|
If the 3DS already recognizes the SD card, this guide is not required.
|
|
|
|
This page is for Windows users only. If you are not on Windows, check out the [Formatting SD (Linux)](formatting-sd-(linux)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
|
|
|
|
### What You Need
|
|
|
|
* **For SD cards 32GB or smaller:** the latest version of [SD Formatter](https://www.sdcard.org/downloads/formatter/sd-memory-card-formatter-for-windows-download/)
|
|
* **For SD cards 64GB or larger:** The latest version of [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)
|
|
|
|
### Instructions (32GB or smaller)
|
|
|
|
1. Insert your SD card into your computer
|
|
1. If the SD card has any files and folders on it, copy everything to a folder on your computer
|
|
1. Run `SD Card Formatter Setup` (the `.exe` file) in the downloaded `.zip` file with Administrator privileges, then install the program
|
|
1. Run `SD Card Formatter` from the Start Menu
|
|
1. Select your SD card's drive letter for "Select card"
|
|
|
|
Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
|
|
{: .notice--danger}
|
|
|
|
1. Enter anything for "Volume label"
|
|
1. Ensure that "Quick Format" is selected
|
|
1. Click "Format"
|
|
1. Click "OK"
|
|
1. Wait for the format to finish
|
|
1. Click "OK"
|
|
1. Close SD Card Formatter
|
|
1. If the SD card had any files and folders on it before the format, copy everything back from your computer
|
|
|
|
### Instructions (64GB or larger)
|
|
|
|
1. Insert your SD card into your computer
|
|
1. If the SD card has any files and folders on it, copy everything to a folder on your computer
|
|
1. Run `guiformat.exe`
|
|
1. Select your SD card's drive letter for "Drive"
|
|
|
|
Make sure you choose the correct drive letter, otherwise you might accidentally erase the wrong drive!
|
|
{: .notice--danger}
|
|
|
|
1. Select a size for "Allocation unit size"
|
|
+ If the SD card is 64GB, choose 32768
|
|
* If the SD card is larger than 64GB, choose 65536
|
|
1. Enter anything for "Volume label"
|
|
1. Ensure that "Quick Format" is selected
|
|
1. Click "Start"
|
|
1. Click "OK"
|
|
1. Wait for the format to finish
|
|
1. Click "Close"
|
|
1. If the SD card had any files and folders on it before the format, copy everything back from your computer
|
|
|
|
### Common Errors using guiformat
|
|
|
|
* Failed to open device: GetLastError()=32
|
|
+ Close everything that may be using the SD card, such as any File Explorer windows.
|
|
|
|
* GetLastError()=1117
|
|
+ Your SD card write-protection switch may be [enabled](/images/sdlock.png). The lock must be flipped upwards to allow writing to the SD card (including formatting). |