mirror of
https://github.com/hacks-guide/Guide_3DS.git
synced 2024-12-11 03:34:13 +00:00
57 lines
2.7 KiB
Plaintext
57 lines
2.7 KiB
Plaintext
---
|
|
title: "ntrboot flashen (3DS Multi-System)"
|
|
---
|
|
|
|
{% include toc title="Table of Contents" %}
|
|
|
|
Bevor du fortfährst solltest du sicherstellen, dass du alle Informationen zu [ntrboot](ntrboot) gelesen hast
|
|
|
|
This method requires temporary access to a second 3DS family device that is already running boot9strap. This does not require your flashcart to support either 3DS's version. See the flashcart table on [ntrboot](ntrboot) for more information.
|
|
|
|
In manchen seltenen Fällen ist es möglich, das während des Flashens einer gefälschten Flashkarte diese **gebrickt** wird und somit permanent unbenutzbar wird. This is unlikely, but nevertheless only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
|
|
{: .notice--danger}
|
|
|
|
### What you need
|
|
|
|
* Eine ntrboot kompatible Flashkarte
|
|
* Two 3DS family devices
|
|
+ **The source 3DS**: the 3DS family device that is already running boot9strap
|
|
+ **The target 3DS**: the device on stock firmware
|
|
* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`ntr` boot9strap; not the `devkit` file)*
|
|
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
|
|
|
|
### Instructions
|
|
|
|
#### Section I - Prep Work
|
|
|
|
1. Schalte den **Quellen-3DS** aus
|
|
1. Lege die SD-Karte des **Quellen-3DS** in deinen Computer ein
|
|
1. Create a folder named `ntrboot` on the root of your SD card
|
|
1. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
|
|
1. Copy `ntrboot_flasher.firm` from the ntrboot_flasher `.zip` to the `/luma/payloads` folder on **the source 3DS**'s SD card
|
|
1. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
|
|
1. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
|
|
|
|
#### Section II - Flashing ntrboot
|
|
|
|
1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
|
|
1. Select "ntrboot_flasher"
|
|
1. Read the red screen warning
|
|
1. Drücke (A) um fortzufahren
|
|
1. Select your flashcart
|
|
+ If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option
|
|
1. Select "Dump Flash"
|
|
1. Warte bis der Prozess beendet ist
|
|
1. Drücke (A) um fortzufahren
|
|
1. Press (A) to return to the main menu
|
|
1. Select "Inject Ntrboot"
|
|
1. Press (A) for retail unit ntrboot
|
|
1. Warte bis der Prozess beendet ist
|
|
1. Press (A) to return to the main menu
|
|
1. Press (B) to power off **the source 3DS**
|
|
|
|
___
|
|
|
|
Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot))
|
|
{: .notice--primary}
|