`
+1. Wait until the process is complete. See below for an example output.
+
+~~~ bash
+$ ./f3read /media/michel/6135-3363/
+ SECTORS ok/corrupted/changed/overwritten
+Validating file 1.h2w ... 2097152/ 0/ 0/ 0
+...
+Validating file 30.h2w ... 1491904/ 0/ 0/ 0
+
+ Data OK: 29.71 GB (62309312 sectors)
+Data LOST: 0.00 Byte (0 sectors)
+ Corrupted: 0.00 Byte (0 sectors)
+ Slightly changed: 0.00 Byte (0 sectors)
+ Overwritten: 0.00 Byte (0 sectors)
+Average Reading speed: 9.42 MB/s
+~~~
+
+If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your storage device is good and you can delete all `.h2w` files on your storage device
+{: .notice--success}
+
+If the test shows any other results, your storage device may be corrupted or damaged and you may have to replace it!
+{: .notice--danger}
+
+___
+
+### Return to [Get Started](get-started)
+{: .notice--primary}
diff --git a/_pages/lt_LT/storage-format-(mac).txt b/_pages/lt_LT/storage-format-(mac).txt
new file mode 100644
index 00000000..79997df2
--- /dev/null
+++ b/_pages/lt_LT/storage-format-(mac).txt
@@ -0,0 +1,54 @@
+---
+title: "Storage Format (Mac)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting a storage device for use with the StorageMgr kernel plugin.
+
+Additionally, there is an optional section for checking your storage device for errors using F3X. Depending on the size of your storage device and the speed of your computer, the checking process can take up to several hours!
+
+This page is for Mac users only. If you are not on Mac, check out the [Storage Format (Windows)](storage-format-(windows)) or [Storage Format (Linux)](storage-format-(linux)) pages.
+
+### What You Need
+
+* The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest)
+ + This is not required if you do not want to check your storage device for errors
+
+### Instructions
+
+#### Section I - Formatting Storage Device
+
+1. Insert your storage device into your computer
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
+
+#### Section II - Verifying Storage Device
+
+If you do not want to check your storage device for errors, skip this section.
+{: .notice--info}
+
+1. Unzip the F3X `.zip` file
+1. Insert your storage device into your computer
+1. Run the F3X app
+1. Select your storage device
+1. Press "Start Test"
+1. Wait until the process is complete.
+
+If the test shows the result `Success! Your card is ok!` your storage device is good and you can delete all `.h2w` files on your storage device
+{: .notice--success}
+
+If the test shows any other results, your storage device may be corrupted or damaged and you may have to replace it!
+{: .notice--danger}
+
+___
+
+### Return to [Get Started](get-started)
+{: .notice--primary}
diff --git a/_pages/lt_LT/storage-format-(windows).txt b/_pages/lt_LT/storage-format-(windows).txt
new file mode 100644
index 00000000..502274a8
--- /dev/null
+++ b/_pages/lt_LT/storage-format-(windows).txt
@@ -0,0 +1,67 @@
+---
+title: "Storage Format (Windows)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This is an add-on section for formatting a storage device for use with the StorageMgr kernel plugin.
+
+Additionally, there is an optional section for checking your storage device for errors using h2testw. Depending on the size of your storage device and the speed of your computer, the checking process can take up to several hours!
+
+This page is for Windows users only. If you are not on Windows, check out the [Storage Format (Linux)](storage-format-(linux)) or [Storage Format (Mac)](storage-format-(mac)) pages.
+
+### What You Need
+
+* [zzBlank.img]({{ "/assets/files/zzBlank.img" | absolute_url }})
+* The latest version of [Win32DiskImager](https://sourceforge.net/projects/win32diskimager/)
+* The latest version of [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)
+ + This is not required if you do not want to check your storage device for errors
+
+### Instructions
+
+#### Section I - Formatting Storage Device
+
+1. Install Win32DiskImager if you have not already
+1. Insert your storage device into your computer
+1. Launch Win32DiskImager
+1. Select `zzBlank.img` as the "Image File"
+1. Set "Device" to the drive letter of your storage device
+1. Select "Write"
+1. Select "Yes" to continue when prompted
+1. Select "OK" to dismiss the dialogue box when the write completes
+1. Close Win32DiskImager
+1. Right-click the drive in Windows Explorer, then select "Format"
+1. Set "File system" to "exFAT"
+ + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Select "Start"
+1. Select "OK" to continue when prompted
+1. Select "OK" to dismiss the dialogue box when the format completes
+1. Close the format window
+
+#### Section II - Verifying Storage Device
+
+If you do not want to check your storage device for errors, skip this section.
+{: .notice--info}
+
+1. Copy `h2testw.exe` from the h2testw `.zip` to your desktop
+1. Insert your storage device card into your computer
+1. Run `h2testw.exe`
+1. Select "English"
+1. Select "Select target"
+1. Select your storage device card's drive letter
+1. Ensure "all available space" is selected
+1. Select "Write + Verify"
+1. Wait until the process is completed
+
+If the test shows the result `Test finished without errors`, your storage device card is good and you can delete all `.h2w` files on your storage device card
+{: .notice--success}
+
+If the test shows any other results, your storage device card may be corrupted or damaged and you may have to replace it!
+{: .notice--danger}
+
+___
+
+### Return to [StorageMgr](storagemgr)
+{: .notice--primary}
diff --git a/_pages/lt_LT/storagemgr.txt b/_pages/lt_LT/storagemgr.txt
new file mode 100644
index 00000000..3e6dd396
--- /dev/null
+++ b/_pages/lt_LT/storagemgr.txt
@@ -0,0 +1,93 @@
+---
+title: "StorageMgr"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
+
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
+
+By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+You must have already installed VitaShell to use this.
+{: .notice--info}
+
+### What You Need
+
+* A formatted storage device compatible with your system
+ + To format your device, see [Storage Format (Windows)](storage-format-(windows)), [Storage Format (Linux)](storage-format-(linux)), or [Storage Format (Mac)](storage-format-(mac))
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
+ + `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ + `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ + `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ + `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
+
+### Instructions
+
+#### Section I - Installing Plugins
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, copy all files from `ux0:tai/` to `ur0:tai/`
+ + Overwrite any existing files in the `ur0:tai/` folder
+ + If you do not have a `ux0:tai/` folder, skip this step
+1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
+1. Transfer `storage_config.txt` to the `ur0:tai/` folder
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ + If you did not have a `ux0:tai/` folder, skip this step
+1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ + `ur0:tai/storagemgr.skprx`
+1. Delete the `ux0:tai/` folder
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
+#### Section II - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Backup the contents of `ux0:` to a folder on your computer
+ + This may take some time if you have a large amount of data on your Sony memory card
+1. Insert your new storage device into your computer
+1. Copy the contents of your `ux0:` folder to your new storage device
+ + This may take some time if you have a large amount of data on your Sony memory card
+ + Do not copy the `ux0:` folder itself to your new storage device
+1. Insert your new storage device into your PS Vita (TV)
+1. Press (Circle) on your device to close the FTP connection
+1. Close the VitaShell application
+1. Reboot your device
+ + If your device does not have Ensō, you will need to manually launch and exit h-encore to enable homebrew
+ + This is required to load the new kernel plugins added to `ur0:tai/config.txt`
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
+
+Your new storage device is now configured and ready for use at the mount point specified in your `storage_config.txt`.
+{: .notice--success}
diff --git a/_pages/lt_LT/troubleshooting.txt b/_pages/lt_LT/troubleshooting.txt
new file mode 100644
index 00000000..700875e0
--- /dev/null
+++ b/_pages/lt_LT/troubleshooting.txt
@@ -0,0 +1,35 @@
+---
+title: "Troubleshooting"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+If you encounter issues, please look for the section relevant to you and follow the instructions.
+
+If you still cannot solve your issue and need to reach out for help, please come for help prepared with a detailed description of your problem and what you've tried.
+
+## A browser based exploit is not working
+
+Browser based exploits (such as the WebKit exploit used for HENkaku) can be unstable and crash frequently, but they can sometimes be fixed by doing the following steps:
+
+1. Ensure your device has a stable network connection
+1. Launch the browser, then open the browser settings
+1. Scroll to the bottom and click "Delete Cookies" and "Clear Search History"
+1. Try the exploit again
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
+
+## Removing an PSN account without formatting your device
+
+1. Go to your [PSN Account Management Page](https://account.sonyentertainmentnetwork.com/home/index!display.action)
+1. Under the devices section, choose "PlayStation Systems"
+1. Select your console
+1. Select "Deactivate"
+
+## Black screen on boot
+
+1. Hold L on boot to disable TaiHEN plugin loading
+1. If your device boots, try editing `ux0:tai/config.txt` and remove any plugins you may have recently added
+1. If these instructions do not work, your device may be bricked
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/lt_LT/updating-firmware-(3.60).txt b/_pages/lt_LT/updating-firmware-(3.60).txt
new file mode 100644
index 00000000..a3a6b9df
--- /dev/null
+++ b/_pages/lt_LT/updating-firmware-(3.60).txt
@@ -0,0 +1,44 @@
+---
+title: "Updating Firmware (3.60)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The HENkaku exploit is only compatible with the firmware version 3.60. As a result, lower firmware versions must update using a custom update server in order to use that exploit.
+
+Note that a custom update server can only update your device, not downgrade it. If you are on a firmware version higher than 3.60, you should return to [Get Started](get-started).
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+#### Section I: Prep Work
+
+1. Launch the Settings application
+1. Navigate to `Network` -> `Wi-Fi Settings`
+ + Connect to a Wi-Fi network if you have not already done so
+1. Select your current connection
+ + This is signified by a green dot next to the network
+1. Select "Advanced Settings"
+1. Set "DNS Settings" to "Manual"
+1. Set "Primary DNS" to `212.47.229.76`
+1. Leave "Secondary DNS" blank
+1. Ensure "Proxy Server" is set to "Do Not Use"
+1. Return to the main Settings menu
+
+#### Section II: Updating to 3.60
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Ensure the update message "3.60 (変革 Compatible)" is displayed
+ + If it displays any other message, stop and figure out what went wrong
+1. Follow the prompts to update your device to 3.60
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing HENkaku](installing-henkaku)
+{: .notice--primary}
diff --git a/_pages/lt_LT/updating-firmware-(3.73).txt b/_pages/lt_LT/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..e3629971
--- /dev/null
+++ b/_pages/lt_LT/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/lt_LT/updating-firmware-(ps-tv-3.65).txt b/_pages/lt_LT/updating-firmware-(ps-tv-3.65).txt
new file mode 100644
index 00000000..1ef9332b
--- /dev/null
+++ b/_pages/lt_LT/updating-firmware-(ps-tv-3.65).txt
@@ -0,0 +1,44 @@
+---
+title: "Updating Firmware (PS TV 3.65)"
+redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with firmware versions 3.65 and above. As a result, other firmware versions must update using a custom update application in order to use that exploit.
+
+While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+
+Note that a custom update application can only update your device, not downgrade it. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+
+### What you need
+
+* A FAT32 formatted USB drive with 150MB of free space
+* The `PSP2Updat.PUP` file corresponding to the firmware version you are attempting to update to
+ + - [PSP2UPDAT.PUP](magnet:?xt=urn:btih:5f2437f2141408c925ffc5d81ff76e94e1a4c493&dn=PSP2UPDAT.PUP&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) (3.65) ([mirror](https://web.archive.org/web/20180630222648id_/http://dus01.psp2.update.playstation.net/update/psp2/image/2017_0317/rel_0a0f2a9ae58968ac5d1d2127049c3cba/PSP2UPDAT.PUP))
+
+### Instructions
+
+#### Section I - Drive Preparation
+
+1. Create a folder named `PSVITA` on the root of your USB drive
+1. Create a folder named `UPDATE` in the `PSVITA` folder on your USB drive
+1. Rename the downloaded `PSP2UPDAT.PUP` to `PSVUPDAT.PUP`
+1. Move `PSVUPDAT.PUP` to the created `UPDATE` folder
+
+#### Section II - Updating Firmware
+
+1. Power off your PS TV completely
+1. Hold the power button for at least 7 seconds to boot into safe-mode
+1. Connect a controller using a USB cable, then press the (PS) button
+1. Navigate to `Update System Software` -> `Update from USB Storage Device`
+1. Connect your USB drive to your PS TV
+1. Follow the prompts to update your device
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/lt_LT/updating-firmware-(ps-vita-3.65).txt b/_pages/lt_LT/updating-firmware-(ps-vita-3.65).txt
new file mode 100644
index 00000000..e3549f3c
--- /dev/null
+++ b/_pages/lt_LT/updating-firmware-(ps-vita-3.65).txt
@@ -0,0 +1,55 @@
+---
+title: "Updating Firmware (PS Vita 3.65)"
+redirect_from: /updating-firmware-(ps-vita-3.65-and-3.68)
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with firmware versions 3.65 and above. As a result, other firmware versions must update using a custom update application in order to use that exploit.
+
+While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+
+Note that a custom update application can only update your device, not downgrade it. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+
+### What you need
+
+* The `PSP2Updat.PUP` file corresponding to the firmware version you are attempting to update to
+ + - [PSP2UPDAT.PUP](magnet:?xt=urn:btih:5f2437f2141408c925ffc5d81ff76e94e1a4c493&dn=PSP2UPDAT.PUP&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) (3.65) ([mirror](https://web.archive.org/web/20180630222648id_/http://dus01.psp2.update.playstation.net/update/psp2/image/2017_0317/rel_0a0f2a9ae58968ac5d1d2127049c3cba/PSP2UPDAT.PUP))
+* The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
+
+### Instructions
+
+#### Section I - finalhe
+
+1. Copy the contents of the finalhe `.zip` to a folder on your computer
+1. Move `PSP2UPDAT.PUP` to the same folder as finalhe
+1. Launch finalhe on your computer
+ + If you are using a Windows computer and are prompted to allow finalhe network access through the firewall, do so
+1. Launch the Content Manager application on your device
+1. Select "Copy Content"
+1. Select "PC"
+1. Select the method you wish to use to connect to finalhe
+ + If you are prompted to log-in to a PlayStation Network Account, do so
+ + If you do not have a PlayStation Network Account, create one
+1. Select / register your computer if prompted
+ + If you encounter a message instructing you to update, reboot your device and try again
+ + If you still encounter this message, enable Flight Mode in the system settings, reboot your device, and try again
+ + If you *still* encounter this message, disable Flight Mode, follow the instructions in [Blocking Updates](blocking-updates), reboot your device, and try again
+ + If your device is not detected over USB on Windows, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+1. The finalhe application should display instructions for updating your device
+
+#### Section II - Updating Firmware
+
+1. Launch the Settings application
+1. Navigate to `System Update` -> `Update by Connecting to a PC`
+1. Ensure the update message "Version 3.65" is displayed, depending on which version you are attempting to update to
+ + If it displays any other message, stop and figure out what went wrong
+1. Follow the prompts to update your device
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/lt_LT/why-ads.txt b/_pages/lt_LT/why-ads.txt
new file mode 100644
index 00000000..e89a86ae
--- /dev/null
+++ b/_pages/lt_LT/why-ads.txt
@@ -0,0 +1,15 @@
+---
+title: "Why Ads?" #
+layout: single-no-ads
+---
+
+This project is an extension of hundreds upon hundreds of hours of constant work.
+
+We maintain this guide, for free, and ensure it is always up to date. Because of this effort, we feel that it is fair for us to attempt to gain a meager income from our work.
+
+This site costs you nothing to use, and all that we display are non-intrusive ads. If you still have a problem with this, feel free to block these ads.
+
+If you do block ads, we would like to also remind you of the [Donations](donations) page, but once again that is optional too.
+
+Thanks,
+Plailect & emiyl
diff --git a/_pages/lt_LT/yamt.txt b/_pages/lt_LT/yamt.txt
new file mode 100644
index 00000000..525ebf32
--- /dev/null
+++ b/_pages/lt_LT/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### What You Need
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing VPKs
+
+1. On your device, navigate to `ux0:` -> `data/`
+1. Press (Square) on each of the `.vpk` files to mark them
+1. Press (Triangle) to open the menu, then select "More" -> "Install all" to install the marked files
+1. Press (Cross) to confirm the install
+1. Press (Cross) to continue the install each time you are prompted about extended permissions
+1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
+1. Press (Cross) to confirm the deletion
+1. Close the VitaShell application
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/ms_MY/adrenaline.txt b/_pages/ms_MY/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/ms_MY/adrenaline.txt
+++ b/_pages/ms_MY/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/ms_MY/blocking-updates.txt b/_pages/ms_MY/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/ms_MY/blocking-updates.txt
+++ b/_pages/ms_MY/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/ms_MY/credits.txt b/_pages/ms_MY/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/ms_MY/credits.txt
+++ b/_pages/ms_MY/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/ms_MY/donations.txt b/_pages/ms_MY/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/ms_MY/donations.txt
+++ b/_pages/ms_MY/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/ms_MY/faq.txt b/_pages/ms_MY/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/ms_MY/faq.txt
+++ b/_pages/ms_MY/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/ms_MY/get-started.txt
+++ b/_pages/ms_MY/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/ms_MY/home.txt
+++ b/_pages/ms_MY/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/ms_MY/installing-h-encore.txt b/_pages/ms_MY/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/ms_MY/installing-h-encore.txt
+++ b/_pages/ms_MY/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/ms_MY/installing-henkaku.txt b/_pages/ms_MY/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/ms_MY/installing-henkaku.txt
+++ b/_pages/ms_MY/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/ms_MY/storage-format-(mac).txt b/_pages/ms_MY/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/ms_MY/storage-format-(mac).txt
+++ b/_pages/ms_MY/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/ms_MY/storagemgr.txt b/_pages/ms_MY/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/ms_MY/storagemgr.txt
+++ b/_pages/ms_MY/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/nl_NL/adrenaline.txt b/_pages/nl_NL/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/nl_NL/adrenaline.txt
+++ b/_pages/nl_NL/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/nl_NL/blocking-updates.txt b/_pages/nl_NL/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/nl_NL/blocking-updates.txt
+++ b/_pages/nl_NL/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/nl_NL/credits.txt b/_pages/nl_NL/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/nl_NL/credits.txt
+++ b/_pages/nl_NL/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/nl_NL/donations.txt b/_pages/nl_NL/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/nl_NL/donations.txt
+++ b/_pages/nl_NL/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/nl_NL/faq.txt b/_pages/nl_NL/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/nl_NL/faq.txt
+++ b/_pages/nl_NL/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/nl_NL/get-started.txt
+++ b/_pages/nl_NL/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/nl_NL/home.txt
+++ b/_pages/nl_NL/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/nl_NL/installing-h-encore.txt b/_pages/nl_NL/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/nl_NL/installing-h-encore.txt
+++ b/_pages/nl_NL/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/nl_NL/installing-henkaku.txt b/_pages/nl_NL/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/nl_NL/installing-henkaku.txt
+++ b/_pages/nl_NL/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/nl_NL/storage-format-(mac).txt b/_pages/nl_NL/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/nl_NL/storage-format-(mac).txt
+++ b/_pages/nl_NL/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/nl_NL/storagemgr.txt b/_pages/nl_NL/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/nl_NL/storagemgr.txt
+++ b/_pages/nl_NL/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/no_NO/adrenaline.txt b/_pages/no_NO/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/no_NO/adrenaline.txt
+++ b/_pages/no_NO/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/no_NO/blocking-updates.txt b/_pages/no_NO/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/no_NO/blocking-updates.txt
+++ b/_pages/no_NO/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/no_NO/credits.txt b/_pages/no_NO/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/no_NO/credits.txt
+++ b/_pages/no_NO/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/no_NO/donations.txt b/_pages/no_NO/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/no_NO/donations.txt
+++ b/_pages/no_NO/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/no_NO/faq.txt b/_pages/no_NO/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/no_NO/faq.txt
+++ b/_pages/no_NO/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/no_NO/get-started.txt
+++ b/_pages/no_NO/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/no_NO/home.txt
+++ b/_pages/no_NO/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/no_NO/installing-h-encore.txt b/_pages/no_NO/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/no_NO/installing-h-encore.txt
+++ b/_pages/no_NO/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/no_NO/installing-henkaku.txt b/_pages/no_NO/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/no_NO/installing-henkaku.txt
+++ b/_pages/no_NO/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/no_NO/storage-format-(mac).txt b/_pages/no_NO/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/no_NO/storage-format-(mac).txt
+++ b/_pages/no_NO/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/no_NO/storagemgr.txt b/_pages/no_NO/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/no_NO/storagemgr.txt
+++ b/_pages/no_NO/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/pl_PL/adrenaline.txt b/_pages/pl_PL/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/pl_PL/adrenaline.txt
+++ b/_pages/pl_PL/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/pl_PL/blocking-updates.txt b/_pages/pl_PL/blocking-updates.txt
index 9876e09c..9166096e 100644
--- a/_pages/pl_PL/blocking-updates.txt
+++ b/_pages/pl_PL/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
-To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### What you need
* An internet connection on your PS Vita (TV)
### Instructions
-#### Section I - DNS Configuration
+#### Section I - Disabling the auto-download option
-Note that these DNS servers will need to be set on each network you connect your device to for it to block updates!
-{: .notice--warning}
-1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
-1. Set "Primary DNS" to `212.47.229.76`
-1. Leave "Secondary DNS" blank
-1. Ensure "Proxy Server" is set to "Do Not Use"
-1. Return to the main Settings menu
1. Navigate to `System` -> `Auto-Start Settings`
1. Uncheck "Download Update File for System Software"
1. Return to the main Settings menu
diff --git a/_pages/pl_PL/credits.txt b/_pages/pl_PL/credits.txt
index e3d033ee..10464089 100644
--- a/_pages/pl_PL/credits.txt
+++ b/_pages/pl_PL/credits.txt
@@ -9,14 +9,17 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/pl_PL/donations.txt b/_pages/pl_PL/donations.txt
index 57cd4d1c..3179d806 100644
--- a/_pages/pl_PL/donations.txt
+++ b/_pages/pl_PL/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/pl_PL/faq.txt b/_pages/pl_PL/faq.txt
index b6ac67f7..0e8de4ee 100644
--- a/_pages/pl_PL/faq.txt
+++ b/_pages/pl_PL/faq.txt
@@ -3,22 +3,22 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
-**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**Q:** *How risky is hacking my console?*
-**A:** Bricks are *basically* impossible unless you ignore instructions.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! This enables any custom user-made homebrew to be played on your device.
**Q:** *Where should I go for support?*
-**A:** For support, ask for help at [Vita Hacking on Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**Q:** *Can I do this without a computer?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/pl_PL/file-extensions-(windows).txt b/_pages/pl_PL/file-extensions-(windows).txt
index 814da6ee..b65b5bcc 100644
--- a/_pages/pl_PL/file-extensions-(windows).txt
+++ b/_pages/pl_PL/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ This will make it easier for you to find the referenced files in the rest of thi
#### Windows 10 / 8.1 / 8
1. Launch File Explorer by opening any directory, such as your SD card directory
-1. Click the "View" option on the ribbon menu
+1. Click the "View" option on the ribbon menu
1. Check the box labeled "File name extensions"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/pl_PL/finalizing-setup-(legacy).txt b/_pages/pl_PL/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..a252532b
--- /dev/null
+++ b/_pages/pl_PL/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+We will now setup applications and plugins such as the following:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(allows for encrypted games and applications to be used)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
++ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
++ **shellbat** *(displays exact battery percentage in the status bar)*
++ **pngshot** *(improves the built-in screenshot utility)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + You cannot use USB file transfer for this section
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:`
+ + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
+1. Delete the `tai` folder if it exists
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Navigate to `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Overwrite (replace) the existing `config.txt` file
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Press (Circle) on your device to close the FTP connection
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Launch the Settings application
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Close the Settings application
+
+#### Section V - PSN Access
+
+1. Launch the Settings application
+1. Navigate to `HENkaku Settings`
+1. Check "Enable PSN spoofing"
+1. Check "Enable Version Spoofing"
+1. Navigate to "Spoofed Version"
+1. Enter "3.73" into the box
+ + Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
+1. Close the Settings application
+
+___
+
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
+{: .notice--success}
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index 20e74b6f..c8f59b01 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -6,86 +6,51 @@ title: "Finalizing Setup"
### Required Reading
-We will now setup applications and plugins such as the following:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
-+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
-+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
-+ **shellbat** *(displays exact battery percentage in the status bar)*
-+ **pngshot** *(improves the built-in screenshot utility)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### What You Need
-* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
- + Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Instructions
-#### Section I - Prep Work
+#### Section I - Installing homebrew applications
-1. Launch the VitaShell application
-1. Press (Start) to open the VitaShell settings
-1. Press (Cross) on "SELECT button" to change the mode to "FTP"
- + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
- + Note that the USB transfer mode will start you in the ux0 partition
- + Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
-1. Press (Circle) to close the VitaShell settings
-1. Press (Select) to enable FTP access on your device
-1. Open your FTP client on your computer
-1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
- + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
- + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
-1. Delete the `tai` folder if it exists
-1. Navigate to `ur0:` -> `tai/`
-1. Transfer `config.txt` to the `tai` folder
- + Overwrite (replace) the existing `config.txt` file
-1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
-1. Transfer `download_enabler.suprx` to the `tai` folder
-1. Transfer `shellbat.suprx` to the `tai` folder
-1. Transfer `pngshot.suprx` to the `tai` folder
-1. Press (Circle) on your device to close the FTP connection
-
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
#### Section III - Blocking Updates
1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
- + You must apply the following DNS settings to each network you use
-1. Set "Primary DNS" to `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Ensure "Proxy Server" is set to "Do Not Use"
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Software`
1. Close the Settings application
#### Section IV - PSN Access
@@ -95,32 +60,19 @@ We will also block updates using a DNS server. The server tricks your device int
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
-
-1. Launch the Content Manager application
-1. Select "Manage Content on Memory Card"
-1. Select "PS Vita"
-1. Delete the following applications if they exist (note that, depending on your install method, some or all of these applications may be missing):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Users on firmware version 3.60 should additionally delete the following application if it exists:
- + "h-encore"
-1. Close the Content Manager application
-
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
{: .notice--danger}
-For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [StorageMgr](storagemgr) page.
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt
index 3272fdcd..d5ecb33d 100644
--- a/_pages/pl_PL/get-started.txt
+++ b/_pages/pl_PL/get-started.txt
@@ -11,7 +11,7 @@ Different device versions will require different steps to achieve the end goal o
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Your device version can be found under the System Information menu in the System category of the Settings application.
@@ -36,23 +36,16 @@ Your device version can be found under the System Information menu in the System
| 1.03 |
- 3.57 |
- Updating Firmware (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Installing HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt
index a7e96251..fe31d84b 100644
--- a/_pages/pl_PL/home.txt
+++ b/_pages/pl_PL/home.txt
@@ -62,8 +62,8 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
+ If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
diff --git a/_pages/pl_PL/installing-enso-(3.60).txt b/_pages/pl_PL/installing-enso-(3.60).txt
index 5a920f48..b9414662 100644
--- a/_pages/pl_PL/installing-enso-(3.60).txt
+++ b/_pages/pl_PL/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
#### Section I - Prep Work
-1. Launch the molecularShell application
+1. Launch the molecularShell or VitaShell application
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
@@ -38,7 +38,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
1. Press (Cross) to continue the install each time you are prompted about extended permissions
1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
1. Press (Cross) to confirm the deletion
-1. Close the molecularShell application
+1. Close the molecularShell or VitaShell application
#### Section III - Installing Ensō
@@ -49,5 +49,5 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/pl_PL/installing-enso-(3.65).txt b/_pages/pl_PL/installing-enso-(3.65).txt
index 4f5685c9..d803f131 100644
--- a/_pages/pl_PL/installing-enso-(3.65).txt
+++ b/_pages/pl_PL/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ Unfortunately, you may experience minor software incompatibilities as you will n
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/pl_PL/installing-enso.txt b/_pages/pl_PL/installing-enso.txt
new file mode 100644
index 00000000..005a1126
--- /dev/null
+++ b/_pages/pl_PL/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Ensō is a complete CFW solution for the PS Vita (TV) which allows for convenient homebrew access on your device by running an exploit at boot-time to setup the HENkaku homebrew environment.
+
+It is more convenient than HENkaku as it does not require you to trigger an exploit on your device after every reboot manually.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### What You Need
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Instructions
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pl_PL/installing-h-encore.txt b/_pages/pl_PL/installing-h-encore.txt
index a1536ac4..1ca095b1 100644
--- a/_pages/pl_PL/installing-h-encore.txt
+++ b/_pages/pl_PL/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -21,60 +21,60 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
* The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- If you are using MacOS or Linux you will be required to compile finalhe yourself
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Instructions
#### Section I - finalhe
-1. Copy the contents of the finalhe `.zip` to a folder on your computer
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Launch finalhe on your computer
+ If you are prompted to allow finalhe network access through the firewall, do so
1. Launch the Content Manager application on your device
-1. Select "Copy Content"
-1. Select "PC"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
+1. Tap "PC"
1. Select the method you wish to use to connect to finalhe
+ If you are prompted to log-in to a PlayStation Network Account, do so
+ If you do not have a PlayStation Network Account, create one
-1. Select / register your computer if prompted
+1. Select or register your computer if prompted
+ If you encounter a message instructing you to update, reboot your device and try again
- + If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
- + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Section II - h-encore Transfer
-1. Select "Trim h-encore to ~13MB"
- + Only do this step if you are on 3.68 or below
-1. Select "Let's GO!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ The exploit files will be automatically downloaded and prepared
+ This process will take some time
-1. Select "PC -> PS Vita System" on your device
-1. Select "Applications"
-1. Select "PS Vita"
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Select "Copy"
-1. Select "OK"
- + The h-encore exploit will be copied to your device
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ This process will take some time
1. Close the Content Manager application on your device
1. Close finalhe on your computer
#### Section III - Configuring h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Launch the h-encore application while holding (R)
- + If prompted about trophies, continue holding (R) and select "Yes"
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. If the exploit was successful, you will now see the h-encore bootstrap menu
- + If the exploit is stuck on a white screen, simply close the application (which will cause a crash and reboot your device), then try again
- + If it is still stuck, hold the power button down for over 30 seconds to force a reboot, then try again
-1. Select "Install HENkaku"
- + This will install the HENkaku exploit and enable homebrew access until the next reboot
-1. Select "Download VitaShell"
- + This will install the VitaShell homebrew application for managing your device's filesystem
- + VitaShell (and all homebrew applications in general) will remain installed after a reboot, but will give an error on launch if the HENkaku exploit is not active
-1. Select "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Section IV - Configuring HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Return to HENkaku Settings menu
1. Close the Settings application
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/pl_PL/installing-henkaku.txt b/_pages/pl_PL/installing-henkaku.txt
index 7bb221a7..035824bd 100644
--- a/_pages/pl_PL/installing-henkaku.txt
+++ b/_pages/pl_PL/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku is an exploit chain for the PS Vita (TV) which will allow for the instal
Note that the HENkaku exploit chain is not "persistent" (meaning it does not remain installed after a reboot). Fortunately, this is only a temporary restriction until HENkaku Ensō is installed on the next page.
-In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analagous to the "administrator" mode on a computer.
+In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/pl_PL/installing-vitadeploy.txt b/_pages/pl_PL/installing-vitadeploy.txt
new file mode 100644
index 00000000..60309084
--- /dev/null
+++ b/_pages/pl_PL/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Table of Contents" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing the application
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/pl_PL/privacy-policy.txt b/_pages/pl_PL/privacy-policy.txt
index 43dc709a..f369502e 100644
--- a/_pages/pl_PL/privacy-policy.txt
+++ b/_pages/pl_PL/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-This site utilizes cookies in order to fascilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
### Embedded Content From Other Websites
diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt
index cdae3ebc..9e88c76d 100644
--- a/_pages/pl_PL/site-navigation.txt
+++ b/_pages/pl_PL/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Downgrading Firmware (3.65)](downgrading-firmware-(3.65))
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Finalizing Setup](finalizing-setup)
+ [Get Started](get-started)
+ [Home](/)
+ [Installing Ensō (3.60)](installing-enso-(3.60))
+ [Installing Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Installing h-encore](installing-h-encore)
+ [Installing HENkaku](installing-henkaku)
+ [Privacy Policy](privacy-policy)
+ [Storage Format (Linux)](storage-format-(linux))
+ [Storage Format (Mac)](storage-format-(mac))
+ [Storage Format (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Troubleshooting](troubleshooting)
+ [Updating Firmware (3.60)](updating-firmware-(3.60))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [Why Ads?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/pl_PL/storage-format-(mac).txt b/_pages/pl_PL/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/pl_PL/storage-format-(mac).txt
+++ b/_pages/pl_PL/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/pl_PL/storage-format-(windows).txt b/_pages/pl_PL/storage-format-(windows).txt
index 21305670..502274a8 100644
--- a/_pages/pl_PL/storage-format-(windows).txt
+++ b/_pages/pl_PL/storage-format-(windows).txt
@@ -64,4 +64,4 @@ If the test shows any other results, your storage device card may be corrupted o
___
### Return to [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/pl_PL/storagemgr.txt b/_pages/pl_PL/storagemgr.txt
index 71cb365f..3e6dd396 100644
--- a/_pages/pl_PL/storagemgr.txt
+++ b/_pages/pl_PL/storagemgr.txt
@@ -6,9 +6,9 @@ title: "StorageMgr"
### Required Reading
-StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
@@ -27,7 +27,7 @@ You must have already installed VitaShell to use this.
+ `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
- + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvd users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Instructions
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/pl_PL/troubleshooting.txt b/_pages/pl_PL/troubleshooting.txt
index ccbf5435..700875e0 100644
--- a/_pages/pl_PL/troubleshooting.txt
+++ b/_pages/pl_PL/troubleshooting.txt
@@ -18,6 +18,7 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Launch the browser, then open the browser settings
1. Scroll to the bottom and click "Delete Cookies" and "Clear Search History"
1. Try the exploit again
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Removing an PSN account without formatting your device
@@ -30,4 +31,5 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Hold L on boot to disable TaiHEN plugin loading
1. If your device boots, try editing `ux0:tai/config.txt` and remove any plugins you may have recently added
-1. If these instructions do not work, your device may be bricked
\ No newline at end of file
+1. If these instructions do not work, your device may be bricked
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/pl_PL/updating-firmware-(3.73).txt b/_pages/pl_PL/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..e3629971
--- /dev/null
+++ b/_pages/pl_PL/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/pl_PL/yamt.txt b/_pages/pl_PL/yamt.txt
new file mode 100644
index 00000000..525ebf32
--- /dev/null
+++ b/_pages/pl_PL/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### What You Need
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing VPKs
+
+1. On your device, navigate to `ux0:` -> `data/`
+1. Press (Square) on each of the `.vpk` files to mark them
+1. Press (Triangle) to open the menu, then select "More" -> "Install all" to install the marked files
+1. Press (Cross) to confirm the install
+1. Press (Cross) to continue the install each time you are prompted about extended permissions
+1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
+1. Press (Cross) to confirm the deletion
+1. Close the VitaShell application
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/pt_BR/adrenaline.txt b/_pages/pt_BR/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/pt_BR/adrenaline.txt
+++ b/_pages/pt_BR/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/pt_BR/blocking-updates.txt b/_pages/pt_BR/blocking-updates.txt
index 9876e09c..9166096e 100644
--- a/_pages/pt_BR/blocking-updates.txt
+++ b/_pages/pt_BR/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
-To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### What you need
* An internet connection on your PS Vita (TV)
### Instructions
-#### Section I - DNS Configuration
+#### Section I - Disabling the auto-download option
-Note that these DNS servers will need to be set on each network you connect your device to for it to block updates!
-{: .notice--warning}
-1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
-1. Set "Primary DNS" to `212.47.229.76`
-1. Leave "Secondary DNS" blank
-1. Ensure "Proxy Server" is set to "Do Not Use"
-1. Return to the main Settings menu
1. Navigate to `System` -> `Auto-Start Settings`
1. Uncheck "Download Update File for System Software"
1. Return to the main Settings menu
diff --git a/_pages/pt_BR/credits.txt b/_pages/pt_BR/credits.txt
index e3d033ee..10464089 100644
--- a/_pages/pt_BR/credits.txt
+++ b/_pages/pt_BR/credits.txt
@@ -9,14 +9,17 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/pt_BR/donations.txt b/_pages/pt_BR/donations.txt
index 57cd4d1c..3179d806 100644
--- a/_pages/pt_BR/donations.txt
+++ b/_pages/pt_BR/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/pt_BR/faq.txt b/_pages/pt_BR/faq.txt
index b6ac67f7..0e8de4ee 100644
--- a/_pages/pt_BR/faq.txt
+++ b/_pages/pt_BR/faq.txt
@@ -3,22 +3,22 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
-**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**Q:** *How risky is hacking my console?*
-**A:** Bricks are *basically* impossible unless you ignore instructions.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! This enables any custom user-made homebrew to be played on your device.
**Q:** *Where should I go for support?*
-**A:** For support, ask for help at [Vita Hacking on Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**Q:** *Can I do this without a computer?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/pt_BR/file-extensions-(windows).txt b/_pages/pt_BR/file-extensions-(windows).txt
index 814da6ee..b65b5bcc 100644
--- a/_pages/pt_BR/file-extensions-(windows).txt
+++ b/_pages/pt_BR/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ This will make it easier for you to find the referenced files in the rest of thi
#### Windows 10 / 8.1 / 8
1. Launch File Explorer by opening any directory, such as your SD card directory
-1. Click the "View" option on the ribbon menu
+1. Click the "View" option on the ribbon menu
1. Check the box labeled "File name extensions"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/pt_BR/finalizing-setup-(legacy).txt b/_pages/pt_BR/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..a252532b
--- /dev/null
+++ b/_pages/pt_BR/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+We will now setup applications and plugins such as the following:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(allows for encrypted games and applications to be used)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
++ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
++ **shellbat** *(displays exact battery percentage in the status bar)*
++ **pngshot** *(improves the built-in screenshot utility)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + You cannot use USB file transfer for this section
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:`
+ + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
+1. Delete the `tai` folder if it exists
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Navigate to `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Overwrite (replace) the existing `config.txt` file
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Press (Circle) on your device to close the FTP connection
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Launch the Settings application
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Close the Settings application
+
+#### Section V - PSN Access
+
+1. Launch the Settings application
+1. Navigate to `HENkaku Settings`
+1. Check "Enable PSN spoofing"
+1. Check "Enable Version Spoofing"
+1. Navigate to "Spoofed Version"
+1. Enter "3.73" into the box
+ + Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
+1. Close the Settings application
+
+___
+
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
+{: .notice--success}
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 20e74b6f..c8f59b01 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -6,86 +6,51 @@ title: "Finalizing Setup"
### Required Reading
-We will now setup applications and plugins such as the following:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
-+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
-+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
-+ **shellbat** *(displays exact battery percentage in the status bar)*
-+ **pngshot** *(improves the built-in screenshot utility)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### What You Need
-* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
- + Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Instructions
-#### Section I - Prep Work
+#### Section I - Installing homebrew applications
-1. Launch the VitaShell application
-1. Press (Start) to open the VitaShell settings
-1. Press (Cross) on "SELECT button" to change the mode to "FTP"
- + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
- + Note that the USB transfer mode will start you in the ux0 partition
- + Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
-1. Press (Circle) to close the VitaShell settings
-1. Press (Select) to enable FTP access on your device
-1. Open your FTP client on your computer
-1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
- + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
- + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
-1. Delete the `tai` folder if it exists
-1. Navigate to `ur0:` -> `tai/`
-1. Transfer `config.txt` to the `tai` folder
- + Overwrite (replace) the existing `config.txt` file
-1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
-1. Transfer `download_enabler.suprx` to the `tai` folder
-1. Transfer `shellbat.suprx` to the `tai` folder
-1. Transfer `pngshot.suprx` to the `tai` folder
-1. Press (Circle) on your device to close the FTP connection
-
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
#### Section III - Blocking Updates
1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
- + You must apply the following DNS settings to each network you use
-1. Set "Primary DNS" to `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Ensure "Proxy Server" is set to "Do Not Use"
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Software`
1. Close the Settings application
#### Section IV - PSN Access
@@ -95,32 +60,19 @@ We will also block updates using a DNS server. The server tricks your device int
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
-
-1. Launch the Content Manager application
-1. Select "Manage Content on Memory Card"
-1. Select "PS Vita"
-1. Delete the following applications if they exist (note that, depending on your install method, some or all of these applications may be missing):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Users on firmware version 3.60 should additionally delete the following application if it exists:
- + "h-encore"
-1. Close the Content Manager application
-
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
{: .notice--danger}
-For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [StorageMgr](storagemgr) page.
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt
index 3272fdcd..d5ecb33d 100644
--- a/_pages/pt_BR/get-started.txt
+++ b/_pages/pt_BR/get-started.txt
@@ -11,7 +11,7 @@ Different device versions will require different steps to achieve the end goal o
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Your device version can be found under the System Information menu in the System category of the Settings application.
@@ -36,23 +36,16 @@ Your device version can be found under the System Information menu in the System
| 1.03 |
- 3.57 |
- Updating Firmware (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Installing HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt
index a7e96251..fe31d84b 100644
--- a/_pages/pt_BR/home.txt
+++ b/_pages/pt_BR/home.txt
@@ -62,8 +62,8 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
+ If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
diff --git a/_pages/pt_BR/installing-enso-(3.60).txt b/_pages/pt_BR/installing-enso-(3.60).txt
index 5a920f48..b9414662 100644
--- a/_pages/pt_BR/installing-enso-(3.60).txt
+++ b/_pages/pt_BR/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
#### Section I - Prep Work
-1. Launch the molecularShell application
+1. Launch the molecularShell or VitaShell application
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
@@ -38,7 +38,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
1. Press (Cross) to continue the install each time you are prompted about extended permissions
1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
1. Press (Cross) to confirm the deletion
-1. Close the molecularShell application
+1. Close the molecularShell or VitaShell application
#### Section III - Installing Ensō
@@ -49,5 +49,5 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/pt_BR/installing-enso-(3.65).txt b/_pages/pt_BR/installing-enso-(3.65).txt
index 4f5685c9..d803f131 100644
--- a/_pages/pt_BR/installing-enso-(3.65).txt
+++ b/_pages/pt_BR/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ Unfortunately, you may experience minor software incompatibilities as you will n
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/pt_BR/installing-enso.txt b/_pages/pt_BR/installing-enso.txt
new file mode 100644
index 00000000..005a1126
--- /dev/null
+++ b/_pages/pt_BR/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Ensō is a complete CFW solution for the PS Vita (TV) which allows for convenient homebrew access on your device by running an exploit at boot-time to setup the HENkaku homebrew environment.
+
+It is more convenient than HENkaku as it does not require you to trigger an exploit on your device after every reboot manually.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### What You Need
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Instructions
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_BR/installing-h-encore.txt b/_pages/pt_BR/installing-h-encore.txt
index a1536ac4..1ca095b1 100644
--- a/_pages/pt_BR/installing-h-encore.txt
+++ b/_pages/pt_BR/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -21,60 +21,60 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
* The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- If you are using MacOS or Linux you will be required to compile finalhe yourself
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Instructions
#### Section I - finalhe
-1. Copy the contents of the finalhe `.zip` to a folder on your computer
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Launch finalhe on your computer
+ If you are prompted to allow finalhe network access through the firewall, do so
1. Launch the Content Manager application on your device
-1. Select "Copy Content"
-1. Select "PC"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
+1. Tap "PC"
1. Select the method you wish to use to connect to finalhe
+ If you are prompted to log-in to a PlayStation Network Account, do so
+ If you do not have a PlayStation Network Account, create one
-1. Select / register your computer if prompted
+1. Select or register your computer if prompted
+ If you encounter a message instructing you to update, reboot your device and try again
- + If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
- + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Section II - h-encore Transfer
-1. Select "Trim h-encore to ~13MB"
- + Only do this step if you are on 3.68 or below
-1. Select "Let's GO!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ The exploit files will be automatically downloaded and prepared
+ This process will take some time
-1. Select "PC -> PS Vita System" on your device
-1. Select "Applications"
-1. Select "PS Vita"
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Select "Copy"
-1. Select "OK"
- + The h-encore exploit will be copied to your device
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ This process will take some time
1. Close the Content Manager application on your device
1. Close finalhe on your computer
#### Section III - Configuring h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Launch the h-encore application while holding (R)
- + If prompted about trophies, continue holding (R) and select "Yes"
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. If the exploit was successful, you will now see the h-encore bootstrap menu
- + If the exploit is stuck on a white screen, simply close the application (which will cause a crash and reboot your device), then try again
- + If it is still stuck, hold the power button down for over 30 seconds to force a reboot, then try again
-1. Select "Install HENkaku"
- + This will install the HENkaku exploit and enable homebrew access until the next reboot
-1. Select "Download VitaShell"
- + This will install the VitaShell homebrew application for managing your device's filesystem
- + VitaShell (and all homebrew applications in general) will remain installed after a reboot, but will give an error on launch if the HENkaku exploit is not active
-1. Select "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Section IV - Configuring HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Return to HENkaku Settings menu
1. Close the Settings application
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/pt_BR/installing-henkaku.txt b/_pages/pt_BR/installing-henkaku.txt
index 7bb221a7..035824bd 100644
--- a/_pages/pt_BR/installing-henkaku.txt
+++ b/_pages/pt_BR/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku is an exploit chain for the PS Vita (TV) which will allow for the instal
Note that the HENkaku exploit chain is not "persistent" (meaning it does not remain installed after a reboot). Fortunately, this is only a temporary restriction until HENkaku Ensō is installed on the next page.
-In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analagous to the "administrator" mode on a computer.
+In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/pt_BR/installing-vitadeploy.txt b/_pages/pt_BR/installing-vitadeploy.txt
new file mode 100644
index 00000000..60309084
--- /dev/null
+++ b/_pages/pt_BR/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Table of Contents" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing the application
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/pt_BR/privacy-policy.txt b/_pages/pt_BR/privacy-policy.txt
index 43dc709a..f369502e 100644
--- a/_pages/pt_BR/privacy-policy.txt
+++ b/_pages/pt_BR/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-This site utilizes cookies in order to fascilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
### Embedded Content From Other Websites
diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt
index cdae3ebc..9e88c76d 100644
--- a/_pages/pt_BR/site-navigation.txt
+++ b/_pages/pt_BR/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Downgrading Firmware (3.65)](downgrading-firmware-(3.65))
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Finalizing Setup](finalizing-setup)
+ [Get Started](get-started)
+ [Home](/)
+ [Installing Ensō (3.60)](installing-enso-(3.60))
+ [Installing Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Installing h-encore](installing-h-encore)
+ [Installing HENkaku](installing-henkaku)
+ [Privacy Policy](privacy-policy)
+ [Storage Format (Linux)](storage-format-(linux))
+ [Storage Format (Mac)](storage-format-(mac))
+ [Storage Format (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Troubleshooting](troubleshooting)
+ [Updating Firmware (3.60)](updating-firmware-(3.60))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [Why Ads?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/pt_BR/storage-format-(mac).txt b/_pages/pt_BR/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/pt_BR/storage-format-(mac).txt
+++ b/_pages/pt_BR/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/pt_BR/storage-format-(windows).txt b/_pages/pt_BR/storage-format-(windows).txt
index 21305670..502274a8 100644
--- a/_pages/pt_BR/storage-format-(windows).txt
+++ b/_pages/pt_BR/storage-format-(windows).txt
@@ -64,4 +64,4 @@ If the test shows any other results, your storage device card may be corrupted o
___
### Return to [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/pt_BR/storagemgr.txt b/_pages/pt_BR/storagemgr.txt
index 71cb365f..3e6dd396 100644
--- a/_pages/pt_BR/storagemgr.txt
+++ b/_pages/pt_BR/storagemgr.txt
@@ -6,9 +6,9 @@ title: "StorageMgr"
### Required Reading
-StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
@@ -27,7 +27,7 @@ You must have already installed VitaShell to use this.
+ `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
- + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvd users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Instructions
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/pt_BR/troubleshooting.txt b/_pages/pt_BR/troubleshooting.txt
index ccbf5435..700875e0 100644
--- a/_pages/pt_BR/troubleshooting.txt
+++ b/_pages/pt_BR/troubleshooting.txt
@@ -18,6 +18,7 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Launch the browser, then open the browser settings
1. Scroll to the bottom and click "Delete Cookies" and "Clear Search History"
1. Try the exploit again
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Removing an PSN account without formatting your device
@@ -30,4 +31,5 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Hold L on boot to disable TaiHEN plugin loading
1. If your device boots, try editing `ux0:tai/config.txt` and remove any plugins you may have recently added
-1. If these instructions do not work, your device may be bricked
\ No newline at end of file
+1. If these instructions do not work, your device may be bricked
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/pt_BR/updating-firmware-(3.73).txt b/_pages/pt_BR/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..e3629971
--- /dev/null
+++ b/_pages/pt_BR/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/pt_BR/yamt.txt b/_pages/pt_BR/yamt.txt
new file mode 100644
index 00000000..525ebf32
--- /dev/null
+++ b/_pages/pt_BR/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### What You Need
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing VPKs
+
+1. On your device, navigate to `ux0:` -> `data/`
+1. Press (Square) on each of the `.vpk` files to mark them
+1. Press (Triangle) to open the menu, then select "More" -> "Install all" to install the marked files
+1. Press (Cross) to confirm the install
+1. Press (Cross) to continue the install each time you are prompted about extended permissions
+1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
+1. Press (Cross) to confirm the deletion
+1. Close the VitaShell application
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/pt_PT/adrenaline.txt b/_pages/pt_PT/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/pt_PT/adrenaline.txt
+++ b/_pages/pt_PT/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/pt_PT/blocking-updates.txt b/_pages/pt_PT/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/pt_PT/blocking-updates.txt
+++ b/_pages/pt_PT/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/pt_PT/credits.txt b/_pages/pt_PT/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/pt_PT/credits.txt
+++ b/_pages/pt_PT/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/pt_PT/donations.txt b/_pages/pt_PT/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/pt_PT/donations.txt
+++ b/_pages/pt_PT/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/pt_PT/faq.txt b/_pages/pt_PT/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/pt_PT/faq.txt
+++ b/_pages/pt_PT/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/pt_PT/get-started.txt
+++ b/_pages/pt_PT/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/pt_PT/home.txt
+++ b/_pages/pt_PT/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/pt_PT/installing-h-encore.txt b/_pages/pt_PT/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/pt_PT/installing-h-encore.txt
+++ b/_pages/pt_PT/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/pt_PT/installing-henkaku.txt b/_pages/pt_PT/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/pt_PT/installing-henkaku.txt
+++ b/_pages/pt_PT/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/pt_PT/storage-format-(mac).txt b/_pages/pt_PT/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/pt_PT/storage-format-(mac).txt
+++ b/_pages/pt_PT/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/pt_PT/storagemgr.txt b/_pages/pt_PT/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/pt_PT/storagemgr.txt
+++ b/_pages/pt_PT/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/ro_RO/adrenaline.txt b/_pages/ro_RO/adrenaline.txt
index 52c77c51..c752413d 100644
--- a/_pages/ro_RO/adrenaline.txt
+++ b/_pages/ro_RO/adrenaline.txt
@@ -47,7 +47,7 @@ Trebuie să aveți deja instalat VitaShell pentru a utiliza aceasta aplicație.
1. Apăsați (Cerc) pentru a reveni la "ux0:"
1. Navigați spre `tai/`
- + În cazul în care `urx:tai` nu există, apăsați (Cerc) din nou apoi navigați spre `ur0:tai`
+ + În cazul în care `ux0:tai` nu există, apăsați (Cerc) din nou apoi navigați spre `ur0:tai`
1. Apăsați (X) pe `config.txt` pentru al deschide în editor
1. Evidențiați linia `* KERNEL` cu cursorul
1. Apăsaţi (triunghi) pentru a deschide meniul, apoi selectaţi "Insert empty line"
diff --git a/_pages/ro_RO/blocking-updates.txt b/_pages/ro_RO/blocking-updates.txt
index 1c786ecb..73312acf 100644
--- a/_pages/ro_RO/blocking-updates.txt
+++ b/_pages/ro_RO/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Blocarea actualizarilor"
### Lectură obligatorie
-The latest PS Vita exploit is not compatible with version 3.71. Astfel, trebuie să așteptăm ca un nou exlpoit să fie lansat și să oprim dispozitivul de a se actualiza mai mult decât versiunea curentă de firmware. Actualizând mai mult ar putea patch-ui viitoarele exploit-uri care ar putea fi folosite.
-
-Pentru a preveni actualizările nedorite, vom configura setările DNS de reţea pentru a folosi un server de actualizare personalizat care arată 3.60 ca ultima actuazlizare disponibilă. Acest lucru are ca efect blocarea oricărei versiuni de firmware mai mare de 3.60 din a fi instalat atunci când dispozitivul încearcă să efectueze o actualizare.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### Ce aveți nevoie
* O conexiune la Internet pe PS Vita (TV)
### Instrucțiuni
-#### Secțiunea I - Configurare DNS
+#### Section I - Disabling the auto-download option
-Țineți cont că aceste servere DNS vor avea nevoie să fie setate pe fiecare conexiune la care vă conectați pentru a putea bloca actualizrile!
-{: .notice--warning}
-1. Lansați aplicația Settings
-1. Navigați spre `Network` -> `Wi-Fi Settings`
- + Conectați-vă la o rețea Wi-Fi dacă nu v-ați conectat deja
-1. Selectaţi-vă reţeaua actuală
- + Aceasta este simbolizată de un punct verde alături de reţea
-1. Selectați "Advanced Settings"
-1. Setați "DNS Settings" la "Manual"
-1. Setaţi "Primary DNS" la `212.47.229.76`
-1. Lăsați "DNS secundar" necompletat
-1. Asigurați-vă că "Proxy Server" este setat la "Do Not Use"
-1. Reveniți la meniul principal de Settings
1. Navigați spre `System` -> `Auto-Start Settings`
1. Debifaţi "Download Update File for System Software"
1. Reveniți la meniul principal de Settings
diff --git a/_pages/ro_RO/credits.txt b/_pages/ro_RO/credits.txt
index cbf547f7..0c35088c 100644
--- a/_pages/ro_RO/credits.txt
+++ b/_pages/ro_RO/credits.txt
@@ -9,14 +9,17 @@ Dacă te-am uitat, contactează-ne și îți vom adăuga numele.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/ro_RO/donations.txt b/_pages/ro_RO/donations.txt
index 73bec911..41d9d0d2 100644
--- a/_pages/ro_RO/donations.txt
+++ b/_pages/ro_RO/donations.txt
@@ -3,25 +3,8 @@ title: "Donaţii"
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/ro_RO/downgrading-firmware-(3.60).txt b/_pages/ro_RO/downgrading-firmware-(3.60).txt
index 161b071e..8a8da0d3 100644
--- a/_pages/ro_RO/downgrading-firmware-(3.60).txt
+++ b/_pages/ro_RO/downgrading-firmware-(3.60).txt
@@ -8,9 +8,9 @@ Acuma vom retrograda dispozitivul la versiunea de firmware 3.60 de vreme ce este
Ensō este cea mai bună soluţie de CFW disponibilă pentru PS Vita (TV), care permite acces convenbil la homebrew pe dispozitiv executând un exploit în timpul pornirii pentru a genera un spaţiu de lucru pentru HENkaku.
-It is more convenient than h-encore as it does not require you to trigger an exploit on your device after every reboot manually.
+Este mai convenabil decât h-encore de vreme ce nu are nevoie să porniţi un exploit pe dispozitiv după fiecare repornire manuală.
-While it is possible to run homebrew on most firmware versions, downgrading to firmware version 3.60 will provide you with the greatest homebrew compatibility.
+Deși este posibil să porniți homebrew pe majoritatea versiunilor de firmware, retrogradând firmware-ul la versiunea 3.60 vă va oferi cea mai mare compatibilitate de homebrew.
De la relansarea plugin-ului de sistem reFOOD, sunt foarte puține (dacă sunt) dezavantaje la rularea versiunii de firmware 3.60 de vreme ce vă permite să instalați și să jucați jocuri care în mod normal ar avea nevoie de o versiune de firmware mai recentă.
@@ -24,7 +24,7 @@ Asigurați-vă că dispozitivul are bateria încărcată la 50% sau mai mult în
* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
+ Alternativ, puteţi utiliza VitaShell in modul USB
* - [PSP2UPDAT.PUP](magnet:?xt=urn:btih:19720f56ab6a299292f009aebae67a9a50eb6e8a&dn=PSP2UPDAT.PUP&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker2.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce) (3.60) ([mirror](https://web.archive.org/web/20160902205052id_/http://dus01.psp2.update.playstation.net/update/psp2/image/2016_0323/rel_cd80b3da55771c99557db552542dff2b/PSP2UPDAT.PUP))
-* The latest release of [modoru](https://github.com/SKGleba/modoru/releases/latest/)
+* Ultima versiune de [modoru](https://github.com/SKGleba/modoru/releases/latest/)
#### Secțiunea I - Preparații
diff --git a/_pages/ro_RO/faq.txt b/_pages/ro_RO/faq.txt
index 01cf1ecb..796bd2f3 100644
--- a/_pages/ro_RO/faq.txt
+++ b/_pages/ro_RO/faq.txt
@@ -3,22 +3,22 @@ title: "Întrebări frecvente"
---
**Î:** *Am dispozitivul actualizat la zi, este dispozitivul modabil?*
-**A:** Yes, 3.72 is hackable at the moment.
+**R:** Da, 3.73 este modabil în prezent.
** Q: ** * Pot să-mi downgradez Vita-ul?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**R:** Da, Modoru poate retrograda orice sistem modat cu HENkaku sau h-encore către orice firmware egal sau mai mare decât firmware-ul de origine al dispozitivului.
**Î:** *Este în regulă să actualizez un Vita cu CFW?*
-**R:** Nu! Trebuie să vă asigurați întotdeauna că ați blocat actualizările așa cum este specificat la sfârșitul secțiunii [Finalizing Setup](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**Î:** *Cât de riscant este să îmi fac modare la consolă?*
-**R:** Brickuirea consolei este practic imposibilă atâta timp cât nu ignorați instructiunile.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Î:** *Pot rula homebrew și emulatoare cu asta?*
**R:** Da! Astfel, orice homebrew poate fi pornit pe consolă.
**Î:** *Unde ar trebui să mă duc pentru asistenţă?*
-**R:** Pentru suport, cereți ajutor la [Vita Hacking pe Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**Î:** *Pot face asta fără un calculator?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/ro_RO/file-extensions-(windows).txt b/_pages/ro_RO/file-extensions-(windows).txt
index 8129f954..ecb600e8 100644
--- a/_pages/ro_RO/file-extensions-(windows).txt
+++ b/_pages/ro_RO/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ Acest lucru vă va ușura în a găsi fișierele menționate în restul acestui
#### Windows 10 / 8.1 / 8
1. Lansați Explorator Windows deschizând orice director, ca directorul cardului SD
-1. Apăsați pe opțiunea "Vizualizare" de pe meniul superior
+1. Apăsați pe opțiunea "Vizualizare" de pe meniul superior
1. Bifați căsuța care scrie "Extensii de nume de fișier"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/ro_RO/finalizing-setup-(legacy).txt b/_pages/ro_RO/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..3c139056
--- /dev/null
+++ b/_pages/ro_RO/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+Acuma vom instala aplicații și plugin-uri precum următoarele:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(permite ca jocurile și aplicațiile criptate să fie folosite)*
++ **0syscall6** *(permite utilizarea jocurilor și a aplicațiilor care necesită versiuni de firmware mai mari)*
++ **DownloadEnabler** *(permite orice tip de fișier să fie descărcat cu browserul)*
++ **shellbat** *(afișează procentajul exact al bateriei în bara de stare)*
++ **pngshot** *(îmbunătățește utilitatea de captură de ecran integrată)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+Pentru a putea instala fișierele `.vpk` (pachet de conținut) necesare pe dispozitiv, folosim [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) pentru a copia fișierele către cardul de memorie al dispozitivului.
+
+### Ce aveți nevoie
+
+* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* Ultima versiune de [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* Ultima versiune de [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* Ultima versiune de [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* Ultima versiune de [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* Ultima versiune de [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Instrucțiuni
+
+#### Secțiunea I - Preparații
+
+1. Lansați aplicația VitaShell
+1. Apăsaţi (Start) pentru a deschide setările de VitaShell
+1. Apăsaţi (X) pe "SELECT button" pentru a schimba modul la "FTP"
+ + You cannot use USB file transfer for this section
+1. Apăsaţi (Cerc) pentru a închide setările de VitaShell
+1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
+1. Deschideţi clientul FTP pe computer
+1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
+1. Folosind clientul FTP, navigați la `ux0:`
+ + Partiția `ux0:` corespunde cardului de memorie de pe dispozitiv (pe PS Vita 1000, această partiție va fi mereu cardul de memorie extern; pe PS Vita 2000 și PS TV, această partiție va fi ori cardul de memorie extern dacă vreunul este inserat, sau cardul de memorie incorporat)
+ + Partiția `ur0:` corespunde la memoria internă a dospozitivului care este mereu prezentă în toate dispozitivele (pe PS Vita 2000 și PS TV, acesta *nu* este la fel ca memoria internă a dispozitivului!)
+1. Ştergeţi folderul `tai` dacă există
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Navigați spre `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Suprascrieți (înlocuiți) fișierul existent `config.txt`
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Apăsați (○) pe dispozitiv pentru a închide conexiunea FTP
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Lansați aplicația VitaShell
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Apăsați (X) pentru a confirma instalarea
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Lansați aplicația Settings
+1. Navigați spre `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Închideți aplicația Settings
+
+#### Section V - PSN Access
+
+1. Lansați aplicația Settings
+1. Navigați spre `HENkaku Settings`
+1. Bifați "Enable PSN Spoofing"
+1. Bifați "Enable Version Spoofing"
+1. Navigați spre "Spoofed Version"
+1. Scrieți "3.73" în căsuță
+ + Când va fi lansată o nouă versiune de firmware pe viitor, va trebui să schimbați versiunea falsificată ca să coincidă astfel încât să aveți acces la PSN
+1. Închideți aplicația Settings
+
+___
+
+Puteți căuta noi aplicaţii de homebrew pe [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+*Nu* este recomandat să se facă modificări la instalarea de Custom Firmware prin instalarea de aplicații homebrew orientate utilizatorilor avansați (precum "Enso EX"). A face asta fără o înțelegere completă a sistemului poate duce la un BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+Pentru informaţii despre instalarea de CFW în emulatorul integrat de PSP, vedeți pagina [Adrenaline](adrenaline).
+{: .notice--success}
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index 62297455..f865d487 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -6,121 +6,73 @@ title: "Finalizând instalarea"
### Lectură obligatorie
-Acuma vom instala aplicații și plugin-uri precum următoarele:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(descarcă și instalează alte aplicații homebrew)*
-+ **NoNpDrm** *(permite ca jocurile și aplicațiile criptate să fie folosite)*
-+ **reF00D** *(permite decriptarea jocurilor și a aplicațiilor de oricare versiune de firmware de formă transparentă)*
-+ **DownloadEnabler** *(permite orice tip de fișier să fie descărcat cu browserul)*
-+ **shellbat** *(afișează procentajul exact al bateriei în bara de stare)*
-+ **pngshot** *(îmbunătățește utilitatea de captură de ecran integrată)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### Ce aveți nevoie
-* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
- + Alternativ, puteţi utiliza VitaShell in modul USB
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* Cea mai nouă versiune de [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* Ultima versiune de [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* Ultima versiune de [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* Ultima versiune de [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* Ultima versiune de [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* Ultima versiune de [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Instrucțiuni
-#### Secțiunea I - Preparații
+#### Section I - Installing homebrew applications
-1. Lansați aplicația VitaShell
-1. Apăsaţi (Start) pentru a deschide setările de VitaShell
-1. Apăsaţi (X) pe "SELECT button" pentru a schimba modul la "FTP"
- + Alternativ, puteţi lăsa această setare pe "USB" şi transfera toate fişierele prin cablu USB pentru restul ghidului
- + Ţineţi cont că modul de transfer USB vă va lăsa iniţial pe partiţia ux0
- + În plus, unele fişiere vor fi ascunse în modul USB pe Windows; trebuie să bifați "Show hidden files, folders and drives" şi debifați "Hide protected operating system files" în opţiunile de File Explorer pentru a vedea toate fişierele
-1. Apăsaţi (Cerc) pentru a închide setările de VitaShell
-1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
-1. Deschideţi clientul FTP pe computer
-1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
-1. Folosind clientul FTP, navigați la `ux0:` -> `data /`
- + Partiția `ux0:` corespunde cardului de memorie de pe dispozitiv (pe PS Vita 1000, această partiție va fi mereu cardul de memorie extern; pe PS Vita 2000 și PS TV, această partiție va fi ori cardul de memorie extern dacă vreunul este inserat, sau cardul de memorie incorporat)
- + Partiția `ur0:` corespunde la memoria internă a dospozitivului care este mereu prezentă în toate dispozitivele (pe PS Vita 2000 și PS TV, acesta *nu* este la fel ca memoria internă a dispozitivului!)
-1. Transferați `VitaHBBrowser.vpk` către folderul `data`
-1. Folosind clientul FTP, navigați la `ux0:`
-1. Ştergeţi folderul `tai` dacă există
-1. Navigați spre `ur0:` -> `tai/`
-1. Transferați `config.txt` către folderul `tai`
- + Suprascrieți (înlocuiți) fișierul existent `config.txt`
-1. Transferați `nonpdrm.skprx` către folderul `tai`
-1. Transferați `reF00D.skprx` către folderul `tai`
-1. Transferați `keys.bin` către folderul `tai`
-1. Transferați `download_enabler.suprx` către folderul `tai`
-1. Transferați `shellbat.suprx` către folderul `tai`
-1. Transferați `pngshot.suprx` către folderul `tai`
-1. Apăsați (○) pe dispozitiv pentru a închide conexiunea FTP
-
-#### Secţiunea III - Instalând VPK-uri
-
-1. Pe dispozitiv, navigaţi la `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Apăsați (X) pentru a confirma instalarea
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Apăsați (X) pentru a confirma stergerea
-1. Închideți aplicația VitaShell
+1. Press (Cross) to confirm the install again when prompted
-#### Secţiunea III - Blocând Actualizările
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section III - Blocking Updates
1. Lansați aplicația Settings
-1. Navigați spre `Network` -> `Wi-Fi Settings`
- + Conectați-vă la o rețea Wi-Fi dacă nu v-ați conectat deja
-1. Selectaţi-vă reţeaua actuală
- + Aceasta este simbolizată de un punct verde alături de reţea
-1. Selectați "Advanced Settings"
-1. Setați "DNS Settings" la "Manual"
- + You must apply the following DNS settings to each network you use
-1. Setaţi "Primary DNS" la `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Asigurați-vă că "Proxy Server" este setat la "Do Not Use"
+1. Navigați spre `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Software`
1. Închideți aplicația Settings
-#### Secţiunea IV - Acces la PSN
+#### Section IV - PSN Access
1. Lansați aplicația Settings
1. Navigați spre `HENkaku Settings`
1. Bifați "Enable PSN Spoofing"
1. Bifați "Enable Version Spoofing"
1. Navigați spre "Spoofed Version"
-1. Enter "3.72" into the box
+1. Scrieți "3.73" în căsuță
+ Când va fi lansată o nouă versiune de firmware pe viitor, va trebui să schimbați versiunea falsificată ca să coincidă astfel încât să aveți acces la PSN
1. Închideți aplicația Settings
-#### Secțiunea V - Curățare
-
-1. Lansați aplicația Content Manager
-1. Selectaţi "Manage Content on Memory Card"
-1. Selectaţi "PS Vita"
-1. Ştergeţi următoarele aplicaţii în cazul în care acestea există (țineți cont că, în funcţie de metoda dumneavoastră de a instala, unele sau toate aceste aplicaţii ar putea să lipsească):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Utilizatorii versiunei de firmware 3.60 ar trebui de asemenea să şteargă aplicația următoare, dacă există:
- + "h-encore"
-1. Închideți aplicația Content Manager
-
___
-Acum puteţi instala cu uşurinţă noi aplicații de homebrew folosind doar Vita Homebrew Browser. Alternativ, puteţi căuta de asemenea noi aplicaţii de homebrew pe [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
*Nu* este recomandat să se facă modificări la instalarea de Custom Firmware prin instalarea de aplicații homebrew orientate utilizatorilor avansați (precum "Enso EX"). A face asta fără o înțelegere completă a sistemului poate duce la un BRICK!
{: .notice--danger}
-Pentru informații despre cum să înlocuiți cardul de memorie Sony cu stocare alternativă (precum un card microSD sau o unitate USB), vedeți pagina [StorageMgr](storagemgr).
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
Pentru informaţii despre instalarea de CFW în emulatorul integrat de PSP, vedeți pagina [Adrenaline](adrenaline).
diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt
index adf321d4..aa2c0fac 100644
--- a/_pages/ro_RO/get-started.txt
+++ b/_pages/ro_RO/get-started.txt
@@ -11,7 +11,7 @@ Modelele diferite de dispozitive vor avea nevoie de pași diferiți pentru a aju
Înainte să începeți, utilizatorii de Windows ar trebui să activeze opțiunea de a arăta extensiile de fișier folosind [Extensii de fișier (Windows)](file-extensions-(windows))!
{: .notice--info}
-Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Versiunea dispozitivului dumneavoastră poate fi găsit sub meniul System Information din categoria System în aplicația Settings.
@@ -36,23 +36,16 @@ Versiunea dispozitivului dumneavoastră poate fi găsit sub meniul System Inform
| 1.03 |
- 3.57 |
- Actualizând Firmware-ul (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Instalând HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Instalând h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt
index d84342d7..183a0e53 100644
--- a/_pages/ro_RO/home.txt
+++ b/_pages/ro_RO/home.txt
@@ -62,8 +62,8 @@ Ensō este disponibil pe toate dispozitivele cu versiune de firmware 3.65 sau in
## Ce trebuie să știu înainte să încep?
+ **Inainte să începeți acest ghid, trebuie să știți riscurile modării unui Vita: DE FIECARE DATĂ când vă modificați sistemul, există întotdeauna potențialul de a face un brick IRECUPERABIL (sistemul va rămâne neutilizabil). Este rar, dar există o posibilitate așa că aveți grijă să urmați TOATE instrucțiunile cu EXACTITATE.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ Dacă totul merge așa cum trebuie, nu o să pierdeți nimic și o să ajungeți să aveți toate lucrurile cu care ați început (jocurile, contul PSN, salvările, etc. vor fi păstrate).
++ Acest ghid va funcţiona pe toate dispozitivele PS Vita, PS Vita Slim, şi PS TV în toate regiunile cu firmware de la 1.03 până la 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Țineți dispozitivul conectat și încărcat pe toată durata procedeului pentru a evita pierderea de date sau daune de la o închidere neașteptată!**
+ Modele PS Vita 2000 şi PS TV sunt practic identice cu modelul original PS Vita 1000 în termeni de software. Toţi paşii care menţionează "PS Vita" se aplică şi la celelalte modele, cu excepţia cazului în care sunt menţionate separat.
+ Dacă aveți un PS Vita 1000, trebuie de asemenea să aveți un card de memorie Sony (de orice mărime) pentru a urma acest ghid. Această restricţie nu se aplică la PS Vita 2000 sau PS TV de vreme ce aceste dispozitive au un card de memorie incorporat.
diff --git a/_pages/ro_RO/installing-enso-(3.60).txt b/_pages/ro_RO/installing-enso-(3.60).txt
index aa826514..61051a10 100644
--- a/_pages/ro_RO/installing-enso-(3.60).txt
+++ b/_pages/ro_RO/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ Este mai convenabil decât HENkaku de vreme ce nu are nevoie să porniţi un exp
#### Secțiunea I - Preparații
-1. Lansați aplicația molecularShell
+1. Launch the molecularShell or VitaShell application
1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
1. Deschideţi clientul FTP pe computer
1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
@@ -38,7 +38,7 @@ Este mai convenabil decât HENkaku de vreme ce nu are nevoie să porniţi un exp
1. Apăsați (X) pentru a continua instalarea de fiecare dată când vi se solicită permisiuni extinse
1. Apăsați (Triunghi) pentru a deschide meniul, apoi selectați "Delete" pentru a șterge fișierele marcate
1. Apăsați (X) pentru a confirma stergerea
-1. Închideți aplicația molecularShell
+1. Close the molecularShell or VitaShell application
#### Secţiunea III - Instalând Ensō
@@ -49,5 +49,5 @@ Este mai convenabil decât HENkaku de vreme ce nu are nevoie să porniţi un exp
___
-### Continuați la [Finalizând instalarea](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/ro_RO/installing-enso-(3.65).txt b/_pages/ro_RO/installing-enso-(3.65).txt
index ae8ccbb7..73acc539 100644
--- a/_pages/ro_RO/installing-enso-(3.65).txt
+++ b/_pages/ro_RO/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ Din păcate, este posibil să apară incompatibilități minore de software de v
___
-### Continuați la [Finalizând instalarea](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/ro_RO/installing-enso.txt b/_pages/ro_RO/installing-enso.txt
new file mode 100644
index 00000000..88be1f2c
--- /dev/null
+++ b/_pages/ro_RO/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+Ensō este cea mai bună soluţie de CFW disponibilă pentru PS Vita (TV), care permite acces convenbil la homebrew pe dispozitiv executând un exploit în timpul pornirii pentru a genera un spaţiu de lucru pentru HENkaku.
+
+Este mai convenabil decât HENkaku de vreme ce nu are nevoie să porniţi un exploit pe dispozitiv după fiecare repornire manuală.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### Ce aveți nevoie
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Instrucțiuni
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Continuați la [Finalizând instalarea](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ro_RO/installing-h-encore.txt b/_pages/ro_RO/installing-h-encore.txt
index 62802ce8..a9301a7e 100644
--- a/_pages/ro_RO/installing-h-encore.txt
+++ b/_pages/ro_RO/installing-h-encore.txt
@@ -1,18 +1,18 @@
---
-title: Installing h-encore
+title: Instalând h-encore
---
{% include toc title="Cuprins" %}
### Lectură obligatorie
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+Exploit-ul h-encore pentru PS Vita (TV) permite instalarea de aplicații homebrew pentru ecranul de pornire. Este compatibil cu versiunile de firmware 3.65 până la 3.73.
-Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
+Țineți cont că exploit-ul h-encore nu este "persistent" (ceea ce înseamnă că nu rămâne instalat după o repornire). Asta înseamnă că trebuie să porniți exploit-ul din nou după fiecare repornire.
-In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
+În plus, faţă de instalarea exploit-ului h-encore, vom activa accesul la homebrew "nesigur" care dă permisiuni extinse la aplicaţiile homebrew. Această idee ar putea fi considerată similară cu modul de "administrator" de pe un calculator.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+Dacă sunteți pe versiunile de firmware 3.65 până la 3.68, veți folosi exploit-ul h-encore, totuși dacă sunteți pe versiunile de firmware 3.69 până la 3.73, veți folosi exploit-ul h-encore². Programul care folosim pentru a instala exploit-ul pe dispozitiv (finalhe) va rezolva asta.
Dacă aveți un PS Vita 1000, trebuie de asemenea să aveți un card de memorie Sony (de orice mărime) pentru a urma acest ghid. Această restricţie nu se aplică la PS Vita 2000 sau PS TV de vreme ce aceste dispozitive au un card de memorie incorporat.
{: .notice--info}
@@ -20,61 +20,61 @@ Dacă aveți un PS Vita 1000, trebuie de asemenea să aveți un card de memorie
### Ce aveți nevoie
* Ultima versiune de [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- - If you are using MacOS or Linux you will be required to compile finalhe yourself
+ - Dacă folosiți MacOS sau Linux va trebui să compilați finalhe singur
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Instrucțiuni
#### Secțiunea I - finalhe
-1. Copiați conținutul arhivei `.zip` către un folder de pe calculator
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Porniți finalhe pe calculator
- + If you are prompted to allow finalhe network access through the firewall, do so
+ + Dacă vi se cere să permiteți accesul la rețea pentru finalhe prin firewall, faceți astfel
1. Lansați aplicația Content Manager pe dispozitiv
-1. Selectați "Copy Content"
-1. Selectați "PC"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + Dacă dispozitivul nu este detectat prin USB, instalați [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) și încercați din nou
+1. Tap "PC"
1. Selectați metoda cu care doriți să vă conectați la finalhe
+ Dacă vi se cere să vă logați la un cont de PlayStation Network, faceți astfel
+ Dacă nu aveți un cont PlayStation Network, creați unul
-1. Selectați / înregistrați calculatorul când vi se cere
+1. Select or register your computer if prompted
+ Dacă vedeți un mesaj care vă cere să actualizați, reporniţi dispozitivul și încercați din nou
- + Dacă încă vedeți acest mesaj, urmați instrucțiunile de pe [Blocând actualizări](blocking-updates) și încercați din nou
- + Dacă *încă* mai vedeți acest mesaj, activați Modul avion în System Settings și încercați din nou (această metodă *nu* va funcționa pe un PS TV)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Secțiunea II - Transfer de h-encore
-1. Selectați "Trim h-encore to ~13MB"
- + Only do this step if you are on 3.68 or below
-1. Selectați "Let's GO!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ Fișierele de exploit vor fi descărcate și pregătite automatic
+ Acest proces va lua ceva timp
-1. Selectați "PC -> PS Vita System" pe dispozitiv
-1. Selectați "Applications"
-1. Selectaţi "PS Vita"
-1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Selectați "Copy"
-1. Selectați "OK"
- + Exploit-ul h-encore va fi copiat pe dispozitiv
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
+1. Selectați "h-encore" sau "h-encore²" depinzând de care este afișat
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ Acest proces va lua ceva timp
1. Închideți aplicația Content Manager pe dispozitiv
1. Închideți finalhe pe calculator
#### Secțiunea III - Configurând h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Lansați aplicaţia h-encore în timp ce ţineţi (R)
- + Dacă vi se întreabă despre trofee, țineți apăsat (R) și selectați Yes"
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. În cazul în care exploit-ul a reușit, veţi vedea acum meniul de pornire h-encore
- + Dacă exploit-ul este blocat pe un ecran alb, pur şi simplu închideţi aplicaţia (care va provoca un crash şi va reporniţi dispozitivul), apoi încercați din nou
- + În cazul în care este încă blocat, apăsați butonul de pornire mai mult de 30 de secunde pentru a forţa o repornire, apoi încercați din nou
-1. Selectaţi "Install HENkaku"
- + Aceasta va instala exploit-ul HENkaku şi va permite accesul la homebrew până la următoarea repornire
-1. Selectați "Download VitaShell"
- + Aceasta va instala aplicația de homebrew VitaShell pentru a administra sistemul de fișiere al dispozitivului
- + VitaShell (și toate aplicațiile de homebrew în general) vor rămâne instalate după o repornire, dar vor afișa o eroare la lansare dacă exploit-ul HENkaku nu este activ
-1. Selectaţi "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Secțiunea IV - Configurând HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Reveniți la meniul de setări HENkaku
1. Închideți aplicația Settings
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Apăsați (X) pentru a confirma instalarea
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/ro_RO/installing-henkaku.txt b/_pages/ro_RO/installing-henkaku.txt
index 798b05d7..75a9bfa7 100644
--- a/_pages/ro_RO/installing-henkaku.txt
+++ b/_pages/ro_RO/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku este lanțul de exploit-uri pentru PS Vita (TV) care permite instalarea
Țineți cont că lanțul de exploit-uri HENkaku nu este "persistent" (ceea ce înseamnă că nu rămâne instalat după o repornire). Din fericire, aceasta este doar o restricţie temporară până când HENkaku Ensō este instalat pe pagina următoare.
-În plus, pe lângă pornirea exploit-ului HENkaku, vom activa accesul la homebrew "nesigur" care dă permisiuni extinse la aplicaţiile homebrew. Această idee ar putea fi considerată similară cu modul de "administrator" de pe un calculator.
+În plus, pe lângă pornirea exploit-ului HENkaku, vom activa accesul la homebrew "nesigur" care dă permisiuni extinse la aplicaţiile homebrew. This idea could be considered analogous to the "administrator" mode on a computer.
Dacă aveți un PS Vita 1000, trebuie de asemenea să aveți un card de memorie Sony (de orice mărime) pentru a urma acest ghid. Această restricţie nu se aplică la PS Vita 2000 sau PS TV de vreme ce aceste dispozitive au un card de memorie incorporat.
{: .notice--info}
@@ -29,7 +29,10 @@ Dacă aveți un PS Vita 1000, trebuie de asemenea să aveți un card de memorie
1. Citiți avertismentul, apoi apăsați "Install"
+ Dacă primiți o eroare și nu puteți continua, [urmați acest ghid de depanare](troubleshooting#a-browser-based-exploit-is-not-working)
1. Dacă exploit-ul a mers, veți avea o bulă pe ecranul LiveArea numit "molecularShell".
- + Dacă exploit-ul a mers, dar aplicația MolecularShell lipsește, faceți exploit-ul din nou și apăsați R1 când vi se cere pentru a reinstala MolecularShell
+ + Dacă exploit-ul a mers dar aplicația MolecularShell lipsește, faceți exploit-ul din nou și apăsați R1 când vi se cere pentru a reinstala molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Secțiunea II - Configurând HENkaku
diff --git a/_pages/ro_RO/installing-vitadeploy.txt b/_pages/ro_RO/installing-vitadeploy.txt
new file mode 100644
index 00000000..f5636338
--- /dev/null
+++ b/_pages/ro_RO/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Cuprins" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+Pentru a putea instala fișierele `.vpk` (pachet de conținut) necesare pe dispozitiv, folosim [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) pentru a copia fișierele către cardul de memorie al dispozitivului.
+
+### Ce aveți nevoie
+
+* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
+ + Alternativ, puteţi utiliza VitaShell in modul USB
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Secțiunea I - Preparații
+
+1. Lansați aplicația VitaShell
+1. Apăsaţi (Start) pentru a deschide setările de VitaShell
+1. Apăsaţi (X) pe "SELECT button" pentru a schimba modul la "FTP"
+ + Alternativ, puteţi lăsa această setare pe "USB" şi transfera toate fişierele prin cablu USB pentru restul ghidului
+1. Apăsaţi (Cerc) pentru a închide setările de VitaShell
+1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
+1. Deschideţi clientul FTP pe computer
+1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
+1. Folosind clientul FTP, navigați la `ux0:` -> `data /`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Apăsați (○) pe dispozitiv pentru a închide conexiunea FTP
+
+#### Section II - Installing the application
+
+1. Lansați aplicația VitaShell
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Apăsați (X) pentru a confirma instalarea
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/ro_RO/privacy-policy.txt b/_pages/ro_RO/privacy-policy.txt
index 5eddf633..10c9ae88 100644
--- a/_pages/ro_RO/privacy-policy.txt
+++ b/_pages/ro_RO/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookie-uri
-Acest site folosește cookie-uri pentru a ușura urmarea instrucțiunilor de către utilizatori. Cookie-urile permit ca bara laterală a paginii să afișeze progresul prezent în site pentru a ajuta utilizatorii să navigheze instrucțiunile mai ușor.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookie-urile permit ca bara laterală a paginii să afișeze progresul prezent în site pentru a ajuta utilizatorii să navigheze instrucțiunile mai ușor.
### Conținut Inclus De Pe Alte Site-uri
diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt
index 5f59c3b9..35cd3d3d 100644
--- a/_pages/ro_RO/site-navigation.txt
+++ b/_pages/ro_RO/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Retrogradând Firmware-ul (3.65)](downgrading-firmware-(3.65))
+ [Întrebări frecvente](faq)
+ [Extensii de fișier (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Finalizând instalarea](finalizing-setup)
+ [Începeți](get-started)
+ [Acasă](/)
+ [Instalând Ensō (3.60)](installing-enso-(3.60))
+ [Instalând Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Instalând h-encore](installing-h-encore)
+ [Instalând HENkaku](installing-henkaku)
+ [Politica de confidenţialitate](privacy-policy)
+ [Formatare de stocare (Linux)](storage-format-(linux))
+ [Formatare de stocare (Mac)](storage-format-(mac))
+ [Formatare de stocare (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Depanare](troubleshooting)
+ [Actualizând Firmware-ul (3.60)](updating-firmware-(3.60))
-+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
-+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
++ [Actualizând Firmware-ul (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
++ [Actualizând Firmware-ul (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [De ce sunt reclame?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/ro_RO/storage-format-(mac).txt b/_pages/ro_RO/storage-format-(mac).txt
index 6ac00a1c..26573510 100644
--- a/_pages/ro_RO/storage-format-(mac).txt
+++ b/_pages/ro_RO/storage-format-(mac).txt
@@ -1,5 +1,5 @@
---
-title: "Storage Format (Mac)"
+title: "Formatare de stocare (Mac)"
---
{% include toc title="Cuprins" %}
@@ -22,11 +22,13 @@ Această pagină este doar pentru utilizatorii de Mac. Dacă nu sunteţi pe Mac,
#### Secțiunea I - Formatând dispozitivul de stocare
1. Introduceți dispozitivul de stocare în calculator
-1. Lansaţi Utilitar disc
-1. Selectaţi dispozitivul de stocare
-1. Selectaţi meniul "Partiţie"
-1. Partiţionaţi dispozitivul de stocare ca MBR cu o singură partiţie exFAT
- Dacă stocarea dispozitivului are o capacitate de 256 GB sau superior, trebuie să formatați cu o mărime cluster de 64 KB
+1. Deschideti aplicația Terminal
+1. Scrieți `diskutil list` în terminal
+1. Identificați care disc este dispozitivul de stocare în formatul `/dev/diskX`
+1. Scrieți `diskutil demontaţi /dev/diskX` și apoi `sudo dd if=/dev/zero of=/dev/diskX` pentru a formata dispozitivul de stocare
+1. Scoateți și reintroduceți dispozitivul de stocare
+1. Introduceți `sudo newfs_exfat -R /dev/diskX` pentru a formata dispozitivul de depozitare în formatul exFAT
+ + Dacă dispozitivul dumneavoastră de stocare are o capacitate de 256 GB sau mai mare, trebuie să scrieți și să executați `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Secțiunea II - Verificând dispozitivul de stocare
diff --git a/_pages/ro_RO/storage-format-(windows).txt b/_pages/ro_RO/storage-format-(windows).txt
index 63f4c8c6..83de03ec 100644
--- a/_pages/ro_RO/storage-format-(windows).txt
+++ b/_pages/ro_RO/storage-format-(windows).txt
@@ -64,4 +64,4 @@ Dacă testul arată alte rezultate, cardul dispozitivului de stocare ar putea fi
___
### Reveniți la [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/ro_RO/storagemgr.txt b/_pages/ro_RO/storagemgr.txt
index 2b9340d6..23123b06 100644
--- a/_pages/ro_RO/storagemgr.txt
+++ b/_pages/ro_RO/storagemgr.txt
@@ -6,11 +6,11 @@ title: "StorageMgr"
### Lectură obligatorie
-StorageMgr este un plugin de kernel cu scop multiplu pentru PS Vita (TV) care permite utilizarea de dispozitive de stocare alternative precum un USB drive, un SD2Vita, sau un psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-SD2Vita este un adpator de microSD la un card de joc care este introdus în slotul cardului de joc din dispozitiv, în timp ce psvd este un adaptor de microSD care înlocuiește modemul 3g în modele 3g de PS Vita.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
-Folosind plugin-ul de kernel StorageMgr, drive-ul USB sau cardul SD pe care îl veți folosi va fi montat pe `ux0:` exact ca un card de memorie Sony. Acest lucru este foarte util deoarece cardurile microSD sunt semnificativ mai ieftine decât cardurile de memorie Sony (mai ales la capacităţi mai mari).
+By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. Acest lucru este foarte util deoarece cardurile microSD sunt semnificativ mai ieftine decât cardurile de memorie Sony (mai ales la capacităţi mai mari).
Pentru asta se va folosi FTP (File Transfer Protocol) spre a transfera fişiere, astfel încât calculatorul și Vita-ul să fie conectați la aceeași rețea.
@@ -19,71 +19,75 @@ Trebuie să aveți deja instalat VitaShell pentru a utiliza aceasta aplicație.
### Ce aveți nevoie
-* Un dispozitiv de stocare formatat compatibil cu sistemul dumneavoastră
- + Pentru a vă formata dispozitivul, vedeți [Formatare de stocare (Windows)](storage-format-(windows)), [Formatare de stocare (Linux)](storage-format-(linux)), sau [Formatare de stocare (Mac)](storage-format-(mac))
+* A formatted storage device compatible with your system
+ + To format your device, see [Storage Format (Windows)](storage-format-(windows)), [Storage Format (Linux)](storage-format-(linux)), or [Storage Format (Mac)](storage-format-(mac))
* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
+ Alternativ, puteţi utiliza VitaShell in modul USB
-* Ultima versiune de [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
- + `storage_config.txt` ar trebui editat pentru a vă potrivi la situație, așa cum este instruit în fișierul [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
- + `MCD=uma0` ar trebui să fie păstrat așa cum este dacă aveţi de gând să păstrați un card de memorie Sony în dispozitiv, şi eliminat în caz contrar
- + `INT=imc0` ar trebui să fie păstrat așa cum este pentru utilizatorii de PS Vita 2000 și PS TV, și șters pentru utilizatorii de PS Vita 1000
- + `GCD=ux0` ar trebui să fie păstrat așa cum este pentru utilizatorii de SD2Vita, și editat în `UMA=ux0` pentru utilizatorii de unități USB și psvd
- + `UMA=grw0` ar trebui să fie șters cu excepția cazului în care aveți unități de stocare multiple (în acest caz dispozitivul care nu este alocat la `ux0:` ar trebui să fie alocat la `grw0:`)
+* The latest release of [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
+ + `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ + `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ + `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ + `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Instrucțiuni
-#### Secţiunea I - Instalând plugin-uri
+#### Section I - Installing Plugins
1. Lansați aplicația VitaShell
1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
1. Deschideţi clientul FTP pe computer
1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
-1. Folosind clientul de FTP, copiaţi toate fişierele din `ux0:tai/` spre `ur0:tai/`
- + Suprascrieți toate fişierele existente din follderul `ur0:tai/`
- + Dacă nu aveși un folder `ux0:tai/`, săriți peste acest pas
-1. Transferați `storagemgr.skprx` către folderul `ur0:tai/`
-1. Transferați `storage_config.txt` către folderul `ur0:tai/`
-1. Pentru orice alte căi în `ur0:tai/config.txt` care conțin`ux0:tai/`, înlocuiți `ux0:tai/` cu `ur0:tai/`
- + Dacă nu aveați un folder `ux0:tai/`, săriți peste acest pas
-1. Adăugaţi următoarea linie la `ur0:tai/config.txt` sub linia `*KERNEL`:
+1. Using your FTP client, copy all files from `ux0:tai/` to `ur0:tai/`
+ + Overwrite any existing files in the `ur0:tai/` folder
+ + If you do not have a `ux0:tai/` folder, skip this step
+1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
+1. Transfer `storage_config.txt` to the `ur0:tai/` folder
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ + If you did not have a `ux0:tai/` folder, skip this step
+1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
-1. Ştergeţi folderul `ux0:tai/`
-
-#### Secțiunea II - Restaurarea datelor
+1. Delete the `ux0:tai/` folder
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
+#### Section II - Restoring Data
Această secţiune va copia datele de pe cardul de memorie Sony vechi la noul dispozitiv de stocare.
{: .notice--info}
-1. Faceți o copie de rezervă la conținutul de pe `ux0:` într-un folder de pe calculator
- + Aceasta poate dura ceva timp, dacă aveţi o cantitate mare de date pe cardul de memorie Sony
-1. Introduceți noul dispozitiv de stocare în calculator
-1. Copiați conținutul de pe folderul `ux0:` în noul dispozitiv de stocare
- + Aceasta poate dura ceva timp, dacă aveţi o cantitate mare de date pe cardul de memorie Sony
- + Nu copiați folderul `ux0:` în noul dispozitiv de stocare
-1. Introduceți noul dispozitiv de stocare în PS Vita (TV)
+1. Backup the contents of `ux0:` to a folder on your computer
+ + This may take some time if you have a large amount of data on your Sony memory card
+1. Insert your new storage device into your computer
+1. Copy the contents of your `ux0:` folder to your new storage device
+ + This may take some time if you have a large amount of data on your Sony memory card
+ + Do not copy the `ux0:` folder itself to your new storage device
+1. Insert your new storage device into your PS Vita (TV)
1. Apăsați (○) pe dispozitiv pentru a închide conexiunea FTP
1. Închideți aplicația VitaShell
1. Reporniți dispozitivul
+ Dacă dispozitivul dvs. nu are Ensō, va trebui să lansați și să ieșiți manual h-encore pentru a activa homebrew
- + Acest pas este necesar pentru a încărca noile plugin-uri de kernel adăugate la `ux0:tai/config.txt`
+ + This is required to load the new kernel plugins added to `ur0:tai/config.txt`
___
{% capture notice-1 %}
Dacă doriţi să recuperați spaţiul de pe cardul de memorie (pentru a stoca jocuri PSP de exemplu), puteți să ştergeţi conţinutul de pe `uma0:` (noul punct de montare a cardului de memorie) şi / sau`imc0:` (dacă aveţi un PS Vita 2000 sau PS TV).
-Dacă decideţi să faceţi acest lucru şi folosiți h-encore pe versiuni de firmware 3.67 sau 3,68, trebuie să *nu* ştergeţi aceste foldere:
+Dacă hotărâți să faceți asta, *nu* ștergeți aceste foldere dacă există:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
Acest lucru este din cauza că trebuie să păstraţi h-encore instalat pe cardul de memorie astfel încât să puteți activa HENkaku (şi, prin urmare, StorageMgr) după o repornire.
{% endcapture %}
{{ notice-1 | markdownify }}
-Noul dispozitiv de stocare este acum configurat și pregătit pentru a fi folosit la punctul de montare specificat în `storage_config.txt`.
+Your new storage device is now configured and ready for use at the mount point specified in your `storage_config.txt`.
{: .notice--success}
diff --git a/_pages/ro_RO/troubleshooting.txt b/_pages/ro_RO/troubleshooting.txt
index 6939b01b..961343f3 100644
--- a/_pages/ro_RO/troubleshooting.txt
+++ b/_pages/ro_RO/troubleshooting.txt
@@ -18,6 +18,7 @@ Exploit-uri bazate pe browser (cum ar fi exploit-ul WebKit folosit pentru HENKak
1. Lansați browserul, apoi deschideți setările browserului
1. Derulați în partea de jos și faceți clic pe "Delete Cookies" și pe "Clear Search History"
1. Încercați exploit-ul din nou
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Scoaterea contului PSN fără a formata dispozitivul dumneavoastră
@@ -30,4 +31,5 @@ Exploit-uri bazate pe browser (cum ar fi exploit-ul WebKit folosit pentru HENKak
1. Țineți apăsat L la pornire pentru a dezactiva încărcarea plugin-ului TaiHEN
1. Dacă dispozitivul pornește, încercați să editați `ux0:tai/config.txt` și ștergeți orice plugin adăugat recent
-1. Dacă aceste instrucțiuni nu funcționează, dispozitivul ar putea fi brick-uit
\ No newline at end of file
+1. Dacă aceste instrucțiuni nu funcționează, dispozitivul ar putea fi brick-uit
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/ro_RO/updating-firmware-(3.73).txt b/_pages/ro_RO/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..abd8917f
--- /dev/null
+++ b/_pages/ro_RO/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### Ce aveți nevoie
+
+* O conexiune la Internet pe PS Vita (TV)
+
+### Instrucțiuni
+
+1. Navigați spre `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + Când se va termina, dispozitivul se va reporni automatic
+
+___
+
+### Continuați la [Instalând h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/ro_RO/updating-firmware-(ps-tv-3.65).txt b/_pages/ro_RO/updating-firmware-(ps-tv-3.65).txt
index 412e4567..e854811f 100644
--- a/_pages/ro_RO/updating-firmware-(ps-tv-3.65).txt
+++ b/_pages/ro_RO/updating-firmware-(ps-tv-3.65).txt
@@ -1,17 +1,16 @@
---
-title: "Updating Firmware (PS TV 3.65)"
-redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
+title: "Actualizând Firmware-ul (PS TV 3.65)" redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
---
{% include toc title="Cuprins" %}
### Lectură obligatorie
-The h-encore exploit is only compatible with firmware versions 3.65 and above. Ca urmare, alte versiuni de firmware trebuie să se actualizeze folosind un server personalizat de aplicații pentru a folosi acel exploit.
+Exploit-ul h-encore este compatibil doar cu versiunile de firmware 3.65 și superior. Ca urmare, alte versiuni de firmware trebuie să se actualizeze folosind un server personalizat de aplicații pentru a folosi acel exploit.
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+Deși exploit-ul h-encore în sine este compatibil cu versiunile de firmware superioare, utilizatorii sub versiunea 3.65 ar trebui să actualizeze doar la versiunea de firmware 3.65 de vreme ce este ultima versiune care încă suportă exploit-ul activat la pornire, Ensō.
-Țineți cont că o actualizare de aplicație personalizată poate doar să actualizeze dispozitivul, nu să-l retrogradeze. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+Țineți cont că o actualizare de aplicație personalizată poate doar să actualizeze dispozitivul, nu să-l retrogradeze. Dacă sunteţi pe o versiune de firmware mai mare decât 3.65, va trebui să reveniți la [Începeți](get-started).
### Ce aveți nevoie
diff --git a/_pages/ro_RO/updating-firmware-(ps-vita-3.65).txt b/_pages/ro_RO/updating-firmware-(ps-vita-3.65).txt
index 1fa09e43..d13e043c 100644
--- a/_pages/ro_RO/updating-firmware-(ps-vita-3.65).txt
+++ b/_pages/ro_RO/updating-firmware-(ps-vita-3.65).txt
@@ -1,17 +1,16 @@
---
-title: "Updating Firmware (PS Vita 3.65)"
-redirect_from: /updating-firmware-(ps-vita-3.65-and-3.68)
+title: "Actualizând Firmware-ul (PS Vita 3.65)" redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
---
{% include toc title="Cuprins" %}
### Lectură obligatorie
-The h-encore exploit is only compatible with firmware versions 3.65 and above. Ca urmare, alte versiuni de firmware trebuie să se actualizeze folosind un server personalizat de aplicații pentru a folosi acel exploit.
+Exploit-ul h-encore este compatibil doar cu versiunile de firmware 3.65 și superior. Ca urmare, alte versiuni de firmware trebuie să se actualizeze folosind un server personalizat de aplicații pentru a folosi acel exploit.
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+Deși exploit-ul h-encore în sine este compatibil cu versiunile de firmware superioare, utilizatorii sub versiunea 3.65 ar trebui să actualizeze doar la versiunea de firmware 3.65 de vreme ce este ultima versiune care încă suportă exploit-ul activat la pornire, Ensō.
-Țineți cont că o actualizare de aplicație personalizată poate doar să actualizeze dispozitivul, nu să-l retrogradeze. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+Țineți cont că o actualizare de aplicație personalizată poate doar să actualizeze dispozitivul, nu să-l retrogradeze. Dacă sunteţi pe o versiune de firmware mai mare decât 3.65, va trebui să reveniți la [Începeți](get-started).
### Ce aveți nevoie
@@ -44,7 +43,7 @@ While the h-encore exploit itself is compatible with higher firmware versions, u
1. Lansați aplicația Settings
1. Navigați spre `System Update` -> `Update by Connecting to a PC`
-1. Ensure the update message "Version 3.65" is displayed, depending on which version you are attempting to update to
+1. Asigurați-vă că mesajul de actualizare "Version 3.65" este afișat, depinzând de ce versiune încercați să actualizați
+ În cazul în care se afişează orice alt mesaj, opriți-vă şi încercați să vă dați seama ce a mers prost
1. Urmaţi instrucţiunile pentru a vă actualiza dispozitivul
+ Când se va termina, dispozitivul se va reporni automatic
diff --git a/_pages/ro_RO/yamt.txt b/_pages/ro_RO/yamt.txt
new file mode 100644
index 00000000..f108db50
--- /dev/null
+++ b/_pages/ro_RO/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. Acest lucru este foarte util deoarece cardurile microSD sunt semnificativ mai ieftine decât cardurile de memorie Sony (mai ales la capacităţi mai mari).
+
+Pentru asta se va folosi FTP (File Transfer Protocol) spre a transfera fişiere, astfel încât calculatorul și Vita-ul să fie conectați la aceeași rețea.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### Ce aveți nevoie
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* Un Client FTP, cum ar fi [WinSCP](https://winscp.net/) sau [CyberDuck](https://cyberduck.io/)
+ + Alternativ, puteţi utiliza VitaShell in modul USB
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instrucțiuni
+
+#### Secțiunea I - Preparații
+
+1. Lansați aplicația VitaShell
+1. Apăsați (Select) pentru a activa accesul FTP pe dispozitiv
+1. Deschideţi clientul FTP pe computer
+1. Introduceţi adresa IP şi Portul afişat pe aparatul dvs
+1. Folosind clientul FTP, navigați la `ux0:` -> `data /`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Apăsați (○) pe dispozitiv pentru a închide conexiunea FTP
+
+#### Secţiunea III - Instalând VPK-uri
+
+1. Pe dispozitiv, navigaţi la `ux0:` -> `data/`
+1. Apăsaţi (pătrat) pe fiecare dintre fişierele `.vpk` pentru a le marca
+1. Apăsaţi (triunghi) pentru a deschide meniul, apoi selectează "More" -> "Install all" pentru a instala fişierele selectate
+1. Apăsați (X) pentru a confirma instalarea
+1. Apăsați (X) pentru a continua instalarea de fiecare dată când vi se solicită permisiuni extinse
+1. Apăsați (Triunghi) pentru a deschide meniul, apoi selectați "Delete" pentru a șterge fișierele marcate
+1. Apăsați (X) pentru a confirma stergerea
+1. Închideți aplicația VitaShell
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+Această secţiune va copia datele de pe cardul de memorie Sony vechi la noul dispozitiv de stocare.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+Dacă doriţi să recuperați spaţiul de pe cardul de memorie (pentru a stoca jocuri PSP de exemplu), puteți să ştergeţi conţinutul de pe `uma0:` (noul punct de montare a cardului de memorie) şi / sau`imc0:` (dacă aveţi un PS Vita 2000 sau PS TV).
+
+Dacă hotărâți să faceți asta, *nu* ștergeți aceste foldere dacă există:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+Acest lucru este din cauza că trebuie să păstraţi h-encore instalat pe cardul de memorie astfel încât să puteți activa HENkaku (şi, prin urmare, StorageMgr) după o repornire.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/ru_RU/adrenaline.txt b/_pages/ru_RU/adrenaline.txt
index 9c6283d7..2bb5863d 100644
--- a/_pages/ru_RU/adrenaline.txt
+++ b/_pages/ru_RU/adrenaline.txt
@@ -47,7 +47,7 @@ Adrenaline это хоумбрю приложение, которое модиф
1. Нажмите (Круг) чтобы вернуться в `ux0:`
1. Перейдите в `tai/`
- + Если у вас нет папки `urx:tai`, снова нажмите (Круг) и перейдите в `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Нажмите (Крест), выделив файл `config.txt` чтобы открыть его в редакторе
1. Выделите строку `*KERNEL`
1. Нажмите (Треугольник) чтобы открыть меню, затем выберите "Insert empty line"
diff --git a/_pages/ru_RU/blocking-updates.txt b/_pages/ru_RU/blocking-updates.txt
index 86a47c93..951a1e6d 100644
--- a/_pages/ru_RU/blocking-updates.txt
+++ b/_pages/ru_RU/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Блокировка обновлений"
### Обязательно к прочтению
-The latest PS Vita exploit is not compatible with version 3.71. В результате мы должны ждать релиза нового эксплойта и запретить консоли обновляться выше её текущей версии прошивки. Дальнейшие обновления могут пропатчить будущие эксплойты, которые могут быть использованы.
-
-Для предотвращения нежелательных обновлений мы изменим настройки DNS вашей консоли, чтобы использовать кастомный сервер обновлений, который указывает на 3.60 в качестве последней доступной версии. Это действие заблокирует установку любых версий прошивки выше 3.60, когда консоль попытается выполнить обновление.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### Что понадобится
* Подключение к интернету на PS Vita (TV)
### Инструкция
-#### Часть I - Конфигурация DNS
+#### Section I - Disabling the auto-download option
-Обратите внимание, что адреса этих DNS серверов должны быть настроены для каждой сети, к которой вы подключаете свою консоль, чтобы обновления блокировались!
-{: .notice--warning}
-1. Запустите приложение Настройки
-1. Перейдите в `Сеть` -> `Настройки Wi-Fi`
- + Подключитесь к сети Wi-Fi, если вы еще этого не сделали
-1. Выберите ваше текущее подключение
- + Оно обозначено зелёной точкой рядом с сетью
-1. Выберите "Дополнительные настройки"
-1. Измените "Настройки DNS" на "Вручную"
-1. Измените "Основной DNS" на `212.47.229.76`
-1. Оставьте "Дополнительный DNS" пустым
-1. Убедитесь, что настройка "Прокси-сервер" имеет значение "Не использовать"
-1. Вернитесь в главное меню настроек
1. Перейдите в `Система` -> `Настройка автозапуска`
1. Снимите флажок "Загружать файл обновления для системного программного обеспечения"
1. Вернитесь в главное меню настроек
diff --git a/_pages/ru_RU/credits.txt b/_pages/ru_RU/credits.txt
index 889a7441..18ad4cd0 100644
--- a/_pages/ru_RU/credits.txt
+++ b/_pages/ru_RU/credits.txt
@@ -9,14 +9,17 @@ title: "Благодарности"
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/ru_RU/donations.txt b/_pages/ru_RU/donations.txt
index 9ad8b7b7..1916a5fe 100644
--- a/_pages/ru_RU/donations.txt
+++ b/_pages/ru_RU/donations.txt
@@ -3,25 +3,8 @@ title: "Пожертвования" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/ru_RU/downgrading-firmware-(3.60).txt b/_pages/ru_RU/downgrading-firmware-(3.60).txt
index e6fbb957..f7e0a5a4 100644
--- a/_pages/ru_RU/downgrading-firmware-(3.60).txt
+++ b/_pages/ru_RU/downgrading-firmware-(3.60).txt
@@ -8,9 +8,9 @@ title: Понижение версии прошивки (3.60)
Ensō это полноценное CFW решение для PS Vita (TV), которое предоставляет удобный доступ к хоумбрю путем запуска эксплойта в процессе загрузки для установки хоумбрю окружения HENkaku.
-It is more convenient than h-encore as it does not require you to trigger an exploit on your device after every reboot manually.
+Это решение более удобно чем h-encore, поскольку не требует вручную активировать эксплойт после каждой перезагрузки.
-While it is possible to run homebrew on most firmware versions, downgrading to firmware version 3.60 will provide you with the greatest homebrew compatibility.
+Хотя и возможно запустить homebrew на большинстве разных версий прошивки, понижение версии прошивки до 3.60 обеспечит вам наибольшую совместимость с homebrew.
С момента выпуска системного плагина reF00D, существует очень мало (если они вообще есть) минусов при использовании прошивки версии 3.60, так как этот плагин позволяет устанавливать и играть в игры, которые обычно требуют более высокой версии прошивки.
@@ -24,7 +24,7 @@ While it is possible to run homebrew on most firmware versions, downgrading to f
* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
+ Вместо этого можно использовать функцию USB transfer в приложении VitaShell
* - [PSP2UPDAT.PUP](magnet:?xt=urn:btih:19720f56ab6a299292f009aebae67a9a50eb6e8a&dn=PSP2UPDAT.PUP&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker2.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce) (3.60) ([mirror](https://web.archive.org/web/20160902205052id_/http://dus01.psp2.update.playstation.net/update/psp2/image/2016_0323/rel_cd80b3da55771c99557db552542dff2b/PSP2UPDAT.PUP))
-* The latest release of [modoru](https://github.com/SKGleba/modoru/releases/latest/)
+* Свежая версия [modoru](https://github.com/SKGleba/modoru/releases/latest/)
#### Часть I - Подготовительные работы
diff --git a/_pages/ru_RU/faq.txt b/_pages/ru_RU/faq.txt
index 7494bc85..a4c13f82 100644
--- a/_pages/ru_RU/faq.txt
+++ b/_pages/ru_RU/faq.txt
@@ -3,22 +3,22 @@ title: "Вопросы и ответы"
---
**В:** *Моя консоль на последней версии прошивки, могу ли я её взломать?*
-**A:** Yes, 3.72 is hackable at the moment.
+**О:** Да, 3.73 на данный момент можно взломать.
**В:** *Могу ли я понизить версию прошивки на своей Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**О:** Да, утилита Modoru может понизить версию прошивки на любой консоли, которая взломана с помощью HENkaku или h-encore, до любой версии равной или выше заводской версии прошивки.
**В:** *Безопасно ли обновлять Vita на кастомной прошивке?*
-**О:** Нет! Убедитесь, что у вас заблокированы обновления, как написано в конце страницы [Завершение установки](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**В:** *Насколько рискованно взламывать мою консоль?*
-**О:** Практически невозможно испортить консоль, если не игнорировать инструкции.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**В:** *Смогу ли я запускать homebrew программы и эмуляторы?*
**О:** Да! На вашей консоли будут доступны любые созданные пользователями homebrew приложения.
**В:** *Куда я могу обратиться за помощью?*
-**О:** Для поддержки, обратитесь за помощью на сервер [Vita Hacking в Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**В:** *Могу ли я обойтись без использования компьютера?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/ru_RU/file-extensions-(windows).txt b/_pages/ru_RU/file-extensions-(windows).txt
index c0eab5bd..c7c8afd4 100644
--- a/_pages/ru_RU/file-extensions-(windows).txt
+++ b/_pages/ru_RU/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ title: "Расширения файлов (Windows)"
#### Windows 10 / 8.1 / 8
1. Запустите Проводник, открыв любую папку, например папку SD-карты
-1. Нажмите кнопку "Вид" в верхнем меню
+1. Нажмите кнопку "Вид" в верхнем меню
1. Установите флажок "Расширения имен файлов"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/ru_RU/finalizing-setup-(legacy).txt b/_pages/ru_RU/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..156a4402
--- /dev/null
+++ b/_pages/ru_RU/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+Мы установим и настроим следующие приложения и плагины:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(позволяет использовать зашифрованные игры и приложения)*
++ **0syscall6** *(позволяет использовать игры и приложения, требующие более высоких версий прошивки)*
++ **DownloadEnabler** *(позволяет скачивать файлы любых типов с помощью браузера)*
++ **shellbat** *(отображает процент заряда батареи в строке состояния)*
++ **pngshot** *(улучшает встроенную утилиту для скриншотов)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+Для установки необходимых файлов `.vpk` (content package) на консоль мы используем [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol), чтобы скопировать файлы на карту памяти консоли.
+
+### Что понадобится
+
+* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* Свежая версия [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* Свежая версия [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* Свежая версия [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* Свежая версия [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* Свежая версия [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Инструкция
+
+#### Часть I - Подготовительные работы
+
+1. Запустите приложение VitaShell
+1. Нажмите (Start) чтобы открыть настройки VitaShell
+1. Нажмите (Крест), выделив пункт "SELECT button" чтобы изменить режим на "FTP"
+ + You cannot use USB file transfer for this section
+1. Нажмите (Круг) чтобы закрыть настройки VitaShell
+1. Нажмите (Select) чтобы включить доступ по FTP на консоли
+1. Запустите FTP клиент на компьютере
+1. Введите IP адрес и порт, отображаемые на консоли
+1. Используя FTP клиент, перейдите в `ux0:`
+ + Раздел `ux0:` соответствует карте памяти консоли (на PS Vita 1000, этот раздел всегда будет внешней картой памяти; на PS Vita 2000 и PS TV этот раздел будет либо внешней картой памяти, если она вставлена, либо встроенной картой памяти в противном случае)
+ + Раздел `ur0:` соответствует встроенной системной памяти, которая всегда присутствует на всех консолях (на PS Vita 2000 и PS TV это *не* то же самое что встроенная карта памяти!)
+1. Удалите папку `tai`, если она существует
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Перейдите в `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Перезапишите существующий файл `config.txt`
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Нажмите (Круг) на консоли чтобы выключить доступ по FTP
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Запустите приложение VitaShell
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Нажмите (Крест) чтобы подтвердить установку
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Запустите приложение Настройки
+1. Перейдите в `Система` -> `Настройка автозапуска`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Закройте приложение Настройки
+
+#### Section V - PSN Access
+
+1. Запустите приложение Настройки
+1. Перейдите в `Настройки HENkaku`
+1. Установите флажок "Включить спуфинг PSN"
+1. Установите флажок "Включить подмену версии"
+1. Перейдите в "Поддельная версия"
+1. Введите "3.73"
+ + Если выйдет новая версия прошивки, вы должны будете изменить эту настройку, чтобы вновь получить доступ к PSN
+1. Закройте приложение Настройки
+
+___
+
+Вы можете найти новые хоумбрю приложения на [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+*НЕ* рекомендуется модифицировать кастомную прошивку путем установки хоумбрю приложений, предназначенных для опытных пользователей (таких как "Enso EX"). Такие действия без полного понимания системы могут привести к БРИКУ!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+Для получения информации об установке CFW во встроенный эмулятор PSP, перейдите к странице [Adrenaline](adrenaline).
+{: .notice--success}
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index 96e8f9e1..62dbcd50 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -6,121 +6,73 @@ title: "Завершение установки"
### Обязательно к прочтению
-Мы установим и настроим следующие приложения и плагины:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(скачивает и устанавливает другие хоумбрю приложения)*
-+ **NoNpDrm** *(позволяет использовать зашифрованные игры и приложения)*
-+ **reF00D** *(позволяет прозрачно расшифровывать игры и приложения на любой версии прошивки)*
-+ **DownloadEnabler** *(позволяет скачивать файлы любых типов с помощью браузера)*
-+ **shellbat** *(отображает процент заряда батареи в строке состояния)*
-+ **pngshot** *(улучшает встроенную утилиту для скриншотов)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### Что понадобится
-* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
- + Вместо этого можно использовать функцию USB transfer в приложении VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* Свежая версия [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* Свежая версия [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* Свежая версия [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* Свежая версия [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* Свежая версия [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* Свежая версия [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Инструкция
-#### Часть I - Подготовительные работы
+#### Section I - Installing homebrew applications
-1. Запустите приложение VitaShell
-1. Нажмите (Start) чтобы открыть настройки VitaShell
-1. Нажмите (Крест), выделив пункт "SELECT button" чтобы изменить режим на "FTP"
- + Вместо этого вы можете оставить режим "USB" и передавать все файлы по USB-кабелю для оставшейся части руководства
- + Обратите внимание, что в режиме USB по умолчанию открывается раздел ux0
- + Кроме того, некоторые файлы будут скрыты в режиме USB под Windows; вам необходимо включить "Показать скрытые файлы, папки и диски" и отключить "Скрывать защищенные системные файлы" в настройках Проводника, чтобы увидеть эти файлы
-1. Нажмите (Круг) чтобы закрыть настройки VitaShell
-1. Нажмите (Select) чтобы включить доступ по FTP на консоли
-1. Запустите FTP клиент на компьютере
-1. Введите IP адрес и порт, отображаемые на консоли
-1. Используя FTP клиент, перейдите в `ux0:` -> `data/`
- + Раздел `ux0:` соответствует карте памяти консоли (на PS Vita 1000, этот раздел всегда будет внешней картой памяти; на PS Vita 2000 и PS TV этот раздел будет либо внешней картой памяти, если она вставлена, либо встроенной картой памяти в противном случае)
- + Раздел `ur0:` соответствует встроенной системной памяти, которая всегда присутствует на всех консолях (на PS Vita 2000 и PS TV это *не* то же самое что встроенная карта памяти!)
-1. Загрузите `VitaHBBrowser.vpk` в папку `data`
-1. Используя FTP клиент, перейдите в `ux0:`
-1. Удалите папку `tai`, если она существует
-1. Перейдите в `ur0:` -> `tai/`
-1. Загрузите `config.txt` в папку `tai`
- + Перезапишите существующий файл `config.txt`
-1. Загрузите `nonpdrm.skprx` в папку `tai`
-1. Загрузите `reF00D.skprx` в папку `tai`
-1. Загрузите `keys.bin` в папку `tai`
-1. Загрузите `download_enabler.suprx` в папку `tai`
-1. Загрузите `shellbat.suprx` в папку `tai`
-1. Загрузите `pngshot.suprx` в папку `tai`
-1. Нажмите (Круг) на консоли чтобы выключить доступ по FTP
-
-#### Часть II - Установка VPK
-
-1. На консоли перейдите в `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Нажмите (Крест) чтобы подтвердить установку
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Нажмите (Крест) чтобы подтвердить удаление
-1. Закройте приложение VitaShell
+1. Press (Cross) to confirm the install again when prompted
-#### Часть III - Блокировка обновлений
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section III - Blocking Updates
1. Запустите приложение Настройки
-1. Перейдите в `Сеть` -> `Настройки Wi-Fi`
- + Подключитесь к сети Wi-Fi, если вы еще этого не сделали
-1. Выберите ваше текущее подключение
- + Оно обозначено зелёной точкой рядом с сетью
-1. Выберите "Дополнительные настройки"
-1. Измените "Настройки DNS" на "Вручную"
- + You must apply the following DNS settings to each network you use
-1. Измените "Основной DNS" на `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Убедитесь, что настройка "Прокси-сервер" имеет значение "Не использовать"
+1. Перейдите в `Система` -> `Настройка автозапуска`
+1. Uncheck the `Download Update File for System Software`
1. Закройте приложение Настройки
-#### Часть IV - Доступ к PSN
+#### Section IV - PSN Access
1. Запустите приложение Настройки
1. Перейдите в `Настройки HENkaku`
1. Установите флажок "Включить спуфинг PSN"
1. Установите флажок "Включить подмену версии"
1. Перейдите в "Поддельная версия"
-1. Enter "3.72" into the box
+1. Введите "3.73"
+ Если выйдет новая версия прошивки, вы должны будете изменить эту настройку, чтобы вновь получить доступ к PSN
1. Закройте приложение Настройки
-#### Часть V - Очистка
-
-1. Запустите приложение Управление данными
-1. Выберите "Управление данными на карте памяти"
-1. Выберите "PS Vita"
-1. Удалите следующие приложения, если они есть (в зависимости от метода установки некоторые либо все эти приложения могут отсутствовать):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Пользователям с версией прошивки 3.60 необходимо также удалить следующие приложения, если они есть:
- + "h-encore"
-1. Закройте приложение Управление данными
-
___
-Теперь вы можете легко устанавливать новые хоумбрю приложения при помощи Vita Homebrew Browser. Кроме того, вы можете найти новые хоумбрю приложения на [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
*НЕ* рекомендуется модифицировать кастомную прошивку путем установки хоумбрю приложений, предназначенных для опытных пользователей (таких как "Enso EX"). Такие действия без полного понимания системы могут привести к БРИКУ!
{: .notice--danger}
-Для получения информации о замене карты памяти Sony на другой носитель (такой как microSD карта или USB диск), перейдите к странице [StorageMgr](storagemgr).
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
Для получения информации об установке CFW во встроенный эмулятор PSP, перейдите к странице [Adrenaline](adrenaline).
diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt
index b3b1931e..66a48ff7 100644
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@@ -11,7 +11,7 @@ title: "Начало"
Перед началом, пользователям Windows необходимо включить отображение расширений файлов следуя [Расширения файлов (Windows)](file-extensions-(windows))!
{: .notice--info}
-Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Версия прошивки вашей консоли отображается в меню Информация о системе в приложении Настройки.
@@ -36,23 +36,16 @@ title: "Начало"
| 1.03 |
- 3.57 |
- Обновление прошивки (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Установка HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Установка h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt
index c15e97b7..63488ec6 100644
--- a/_pages/ru_RU/home.txt
+++ b/_pages/ru_RU/home.txt
@@ -62,8 +62,8 @@ Ensō доступен на всех консолях с версией прош
## Что нужно знать перед тем, как начать?
+ **Перед тем, как начинать прошивку, следует понимать риск взлома Vita: КАЖДЫЙ раз, модифицируя прошивку консоли, вы рискуете получить НЕВОССТАНОВИМЫЙ брик. Вероятность этого крайне низкая, но шанс всё равно есть. Так что убедитесь что вы СТРОГО следуете всем указаниям.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ Если всё пройдет по плану, вы ничего не потеряете и всё останется в первоначальном состоянии (игры, сохранения, аккаунт PSN).
++ Это руководство предназначено для консолей PS Vita, PS Vita Slim и PS TV любых регионов на прошивке от 1.03 до 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Держите консоль подключенной к зарядному устройству на протяжении всего процесса, чтобы избежать потери данных или поломки, в случае внезапного отключения консоли**
+ PS Vita 2000 и PS TV являются идентичными оригинальной PS Vita 1000 в плане программного обеспечения. Все инструкции для "PS Vita" применимы также к другим моделям, если не указано иное.
+ Если у вас PS Vita 1000, то вам также понадобится официальная карта памяти Sony (любого размера) для выполнения этого руководства. Это ограничение не применяется к PS Vita 2000 или PS TV, поскольку эти консоли имеют встроенную карту памяти.
diff --git a/_pages/ru_RU/installing-enso-(3.60).txt b/_pages/ru_RU/installing-enso-(3.60).txt
index 39630876..06a62a5f 100644
--- a/_pages/ru_RU/installing-enso-(3.60).txt
+++ b/_pages/ru_RU/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ Ensō это полноценное CFW решение для PS Vita (TV), ко
#### Часть I - Подготовительные работы
-1. Запустите приложение molecularShell
+1. Launch the molecularShell or VitaShell application
1. Нажмите (Select) чтобы включить доступ по FTP на консоли
1. Запустите FTP клиент на компьютере
1. Введите IP адрес и порт, отображаемые на консоли
@@ -38,7 +38,7 @@ Ensō это полноценное CFW решение для PS Vita (TV), ко
1. Нажимайте (Крест) чтобы продолжить каждый раз, когда появляется запрос о расширенных правах
1. Нажмите (Треугольник) чтобы открыть меню, затем выберите "Delete" чтобы удалить все выделенные файлы
1. Нажмите (Крест) чтобы подтвердить удаление
-1. Закройте приложение molecularShell
+1. Close the molecularShell or VitaShell application
#### Часть III - Установка Ensō
@@ -49,5 +49,5 @@ Ensō это полноценное CFW решение для PS Vita (TV), ко
___
-### Следующий шаг: [Завершение установки](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/ru_RU/installing-enso-(3.65).txt b/_pages/ru_RU/installing-enso-(3.65).txt
index e1b960d1..15ba02a1 100644
--- a/_pages/ru_RU/installing-enso-(3.65).txt
+++ b/_pages/ru_RU/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ title: "Установка Ensō (3.65)"
___
-### Следующий шаг: [Завершение установки](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/ru_RU/installing-enso.txt b/_pages/ru_RU/installing-enso.txt
new file mode 100644
index 00000000..5816027e
--- /dev/null
+++ b/_pages/ru_RU/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+Ensō это полноценное CFW решение для PS Vita (TV), которое предоставляет удобный доступ к хоумбрю путем запуска эксплойта в процессе загрузки для установки хоумбрю окружения HENkaku.
+
+Это решение более удобно чем HENkaku, поскольку не требует вручную активировать эксплойт после каждой перезагрузки.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### Что понадобится
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Инструкция
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Следующий шаг: [Завершение установки](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ru_RU/installing-h-encore.txt b/_pages/ru_RU/installing-h-encore.txt
index c9bd6d30..d40b355d 100644
--- a/_pages/ru_RU/installing-h-encore.txt
+++ b/_pages/ru_RU/installing-h-encore.txt
@@ -1,18 +1,18 @@
---
-title: Installing h-encore
+title: Установка h-encore
---
{% include toc title="Содержание" %}
### Обязательно к прочтению
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+Эксплойт h-encore для PS Vita (TV) позволяет устанавливать хоумбрю приложения на начальный экран. Он совместим с версиями прошивки от 3.65 до 3.73.
-Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
+Обратите внимание, что h-encore не является "постоянным" решением (то есть не остается установленным после перезагрузки). Это означает, что вам придется запускать эксплойт снова после каждой перезагрузки.
-In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
+В дополнение к установке эксплойта h-encore мы включим доступ к "небезопасному" хоумбрю, что даст расширенные права хоумбрю приложениям. Этот принцип можно представить как аналог режима "администратор" на компьютере.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+Если вы используете прошивку версии от 3.65 до 3.68, то будете использовать эксплойт h-encore, однако если вы используете прошивку версии от 3.69 до 3.73, то будете использовать эксплойт h-encore². Программа, используемая для установки эксплойта на вашу консоль (finalhe), может сделать этот выбор для вас.
Если у вас PS Vita 1000, то вам также понадобится официальная карта памяти Sony (любого размера) для выполнения этого руководства. Это ограничение не применяется к PS Vita 2000 или PS TV, поскольку эти консоли имеют встроенную карту памяти.
{: .notice--info}
@@ -20,61 +20,61 @@ If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exp
### Что понадобится
* Свежая версия [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- - If you are using MacOS or Linux you will be required to compile finalhe yourself
+ - Если вы используете MacOS или Linux, вам нужно будет собрать finalhe самостоятельно
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Инструкция
#### Часть I - finalhe
-1. Скопируйте содержимое `zip-архива` finalhe в папку на вашем компьютере
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Запустите finalhe на компьютере
- + If you are prompted to allow finalhe network access through the firewall, do so
+ + Если появится запрос на разрешение доступа к сети для finalhe, разрешите доступ
1. Запустите на консоли приложение "Управление данными"
-1. Выберите "Скопировать контент"
-1. Выберите "Компьютер"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
+1. Tap "PC"
1. Выберите метод, который вы хотите использовать для подключения к finalhe
+ Если вам предложат войти в аккаунт PlayStation Network, сделайте это
+ Если у вас нет аккаунта PlayStation Network, создайте его
-1. Выберите / зарегистрируйте ваш компьютер, если появится запрос
+1. Select or register your computer if prompted
+ Если появится сообщение о необходимости обновления, перезагрузите консоль и попробуйте снова
- + Если сообщение по-прежнему появляется, выполните инструкции на странице [Блокировка обновлений](blocking-updates) и попробуйте снова
- + Если сообщение *по-прежнему* появляется, включите Режим авиаперелета в Системных настройках и попробуйте снова (это *не* работает для PS TV)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Часть II - Перенос h-encore
-1. Выберите "Обрезать пузырь h-encore до ~13МБ"
- + Only do this step if you are on 3.68 or below
-1. Выберите "Поехали!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ Файлы эксплойта будут автоматически скачаны и подготовлены
+ Этот процесс займет некоторое время
-1. Выберите "PC -> система PS Vita" на консоли
-1. Выберите "Приложения"
-1. Выберите "PS Vita"
-1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Выберите "Копировать"
-1. Выберите "OK"
- + Эксплойт h-encore будет скопирован на вашу консоль
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
+1. Выберите "h-encore" или "h-encore²" в зависимости от того, что отображается
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ Этот процесс займет некоторое время
1. Закройте приложение "Управление данными" на консоли
1. Закройте finalhe на компьютере
#### Часть III - Настройка h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Запустите приложение h-encore, держа нажатой кнопку (R)
- + Если появится запрос о призах, выберите "Да", продолжая держать нажатой кнопку (R)
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. Если эксплойт сработал, вы увидите меню h-encore bootstrap
- + Если эксплойт завис на белом экране, просто закройте приложение (это приведет к перезагрузке консоли), затем попробуйте снова
- + Если это не помогло, удерживайте кнопку питания в течение 30 секунд для принудительной перезагрузки, затем попробуйте снова
-1. Выберите "Install HENkaku"
- + Это действие установит эксплойт HENkaku и разрешит доступ к хоумбрю до следующей перезагрузки
-1. Выберите "Download VitaShell"
- + Это действие установит хоумбрю приложение VitaShell для управления файловой системой консоли
- + VitaShell (как и все прочие хоумбрю приложения) останется установленным после перезагрузки, но будет выдавать ошибку при запуске, если эксплойт HENkaku не активен
-1. Выберите "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Часть IV - Настройка HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Вернитесь в меню Настройки HENkaku
1. Закройте приложение Настройки
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Нажмите (Крест) чтобы подтвердить установку
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/ru_RU/installing-henkaku.txt b/_pages/ru_RU/installing-henkaku.txt
index 1c46fea7..94c3570b 100644
--- a/_pages/ru_RU/installing-henkaku.txt
+++ b/_pages/ru_RU/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku это набор эксплойтов для PS Vita (TV), которы
Обратите внимание, что HENkaku не является "постоянным" решением (то есть не остается установленным после перезагрузки). Это временное ограничение, пока не будет установлен HENkaku Ensō далее по инструкции.
-В дополнение к установке эксплойта HENkaku мы получим доступ к "небезопасному" хоумбрю, что даст расширенные права хоумбрю приложениям. Этот принцип можно представить как аналог режима "администратор" на компьютере.
+В дополнение к установке эксплойта HENkaku мы получим доступ к "небезопасному" хоумбрю, что даст расширенные права хоумбрю приложениям. This idea could be considered analogous to the "administrator" mode on a computer.
Если у вас PS Vita 1000, то вам также понадобится официальная карта памяти Sony (любого размера) для выполнения этого руководства. Это ограничение не применяется к PS Vita 2000 или PS TV, поскольку эти консоли имеют встроенную карту памяти.
{: .notice--info}
@@ -29,7 +29,10 @@ HENkaku это набор эксплойтов для PS Vita (TV), которы
1. Прочитайте отказ от ответственности, затем нажмите "Install"
+ При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#не-работает-эксплойт-на-основе-браузера)
1. Если эксплойт сработал, то на экране LiveArea появится значок "molecularShell".
- + Если эксплойт сработал, но значок molecularShell не появился, запустите эксплойт снова и нажмите R1 при появлении запроса чтобы переустановить molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Часть II - Настройка HENkaku
diff --git a/_pages/ru_RU/installing-vitadeploy.txt b/_pages/ru_RU/installing-vitadeploy.txt
new file mode 100644
index 00000000..5dc8fc46
--- /dev/null
+++ b/_pages/ru_RU/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Содержание" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+Для установки необходимых файлов `.vpk` (content package) на консоль мы используем [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol), чтобы скопировать файлы на карту памяти консоли.
+
+### Что понадобится
+
+* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
+ + Вместо этого можно использовать функцию USB transfer в приложении VitaShell
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Часть I - Подготовительные работы
+
+1. Запустите приложение VitaShell
+1. Нажмите (Start) чтобы открыть настройки VitaShell
+1. Нажмите (Крест), выделив пункт "SELECT button" чтобы изменить режим на "FTP"
+ + Вместо этого вы можете оставить режим "USB" и передавать все файлы по USB-кабелю для оставшейся части руководства
+1. Нажмите (Круг) чтобы закрыть настройки VitaShell
+1. Нажмите (Select) чтобы включить доступ по FTP на консоли
+1. Запустите FTP клиент на компьютере
+1. Введите IP адрес и порт, отображаемые на консоли
+1. Используя FTP клиент, перейдите в `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Нажмите (Круг) на консоли чтобы выключить доступ по FTP
+
+#### Section II - Installing the application
+
+1. Запустите приложение VitaShell
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Нажмите (Крест) чтобы подтвердить установку
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/ru_RU/privacy-policy.txt b/_pages/ru_RU/privacy-policy.txt
index 9e49fcd3..fe0d4cbc 100644
--- a/_pages/ru_RU/privacy-policy.txt
+++ b/_pages/ru_RU/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-Этот сайт использует cookies для содействия в направлении пользователей через инструкции руководства. Cookies позволяют боковой панели страницы отображать текущий прогресс в руководстве, чтобы упростить навигацию между инструкциями для пользователей.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies позволяют боковой панели страницы отображать текущий прогресс в руководстве, чтобы упростить навигацию между инструкциями для пользователей.
### Встроенное содержимое с других сайтов
diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt
index d696290c..108810dc 100644
--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Понижение версии прошивки (3.65)](downgrading-firmware-(3.65))
+ [Вопросы и ответы](faq)
+ [Расширения файлов (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Завершение установки](finalizing-setup)
+ [Начало](get-started)
+ [Главная](/)
+ [Установка Ensō (3.60)](installing-enso-(3.60))
+ [Установка Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Установка h-encore](installing-h-encore)
+ [Установка HENkaku](installing-henkaku)
+ [Политика конфиденциальности](privacy-policy)
+ [Форматирование накопителя (Linux)](storage-format-(linux))
+ [Форматирование накопителя (Mac)](storage-format-(mac))
+ [Форматирование накопителя (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Проблемы и их решения](troubleshooting)
+ [Обновление прошивки (3.60)](updating-firmware-(3.60))
-+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
-+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
++ [Обновление прошивки (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
++ [Обновление прошивки (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [Зачем реклама?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/ru_RU/storage-format-(mac).txt b/_pages/ru_RU/storage-format-(mac).txt
index 130017f9..68cd6822 100644
--- a/_pages/ru_RU/storage-format-(mac).txt
+++ b/_pages/ru_RU/storage-format-(mac).txt
@@ -22,11 +22,13 @@ title: "Storage Format (Mac)"
#### Часть I - Форматирование накопителя
1. Вставьте накопитель в компьютер
-1. Запустите Дисковую утилиту
-1. Выберите свой накопитель
-1. Выберите "Разбить на разделы"
-1. Отформатируйте накопитель в качестве MBR с одним разделом exFAT
- + Если накопитель имеет емкость 256 ГБ или больше, то необходимо произвести форматирование с размером кластера 64 КБ
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Часть II - Проверка накопителя
diff --git a/_pages/ru_RU/storage-format-(windows).txt b/_pages/ru_RU/storage-format-(windows).txt
index ad2e7bbf..4a35b214 100644
--- a/_pages/ru_RU/storage-format-(windows).txt
+++ b/_pages/ru_RU/storage-format-(windows).txt
@@ -64,4 +64,4 @@ title: "Форматирование накопителя (Windows)"
___
### Вернитесь к [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/ru_RU/storagemgr.txt b/_pages/ru_RU/storagemgr.txt
index b666863f..f4befc23 100644
--- a/_pages/ru_RU/storagemgr.txt
+++ b/_pages/ru_RU/storagemgr.txt
@@ -6,11 +6,11 @@ title: "StorageMgr"
### Обязательно к прочтению
-StorageMgr это многофункциональный плагин для PS Vita (TV), который позволяет использовать альтернативные накопители, такие как USB диск, SD2Vita или psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-SD2Vita это адаптер для microSD карты, который вставляется в слот для картриджа с игрой, а psvd это адаптер для microSD карты, который заменяет собой 3g модем на моделях PS Vita с поддержкой 3g.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
-При помощи плагина StorageMgr, USB диск или microSD карта могут быть смонтированы как `ux0:` аналогично карте памяти Sony. Это весьма полезно, поскольку microSD карты значительно дешевле карт памяти Sony (особенно высокой емкости).
+By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. Это весьма полезно, поскольку microSD карты значительно дешевле карт памяти Sony (особенно высокой емкости).
Мы воспользуемся FTP (File Transfer Protocol) для передачи файлов, поэтому Vita и ПК должны быть подключены к одной сети.
@@ -19,71 +19,75 @@ SD2Vita это адаптер для microSD карты, который вста
### Что понадобится
-* Отформатированный накопитель, совместимый с вашей системой
- + Чтобы выполнить форматирование, смотрите страницу [Форматирование накопителя (Windows)](storage-format-(windows)), [Форматирование накопителя (Linux)](storage-format-(linux)) или [Форматирование накопителя (Mac)](storage-format-(mac))
+* A formatted storage device compatible with your system
+ + To format your device, see [Storage Format (Windows)](storage-format-(windows)), [Storage Format (Linux)](storage-format-(linux)), or [Storage Format (Mac)](storage-format-(mac))
* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
+ Вместо этого можно использовать функцию USB transfer в приложении VitaShell
-* Свежая версия [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
- + Файл `storage_config.txt` должен быть отредактирован согласно вашей ситуации, как указано в [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
- + `MCD=uma0` остается неизменным, если вы планируете продолжить пользоваться картой памяти Sony, и удаляется в противном случае
- + `INT=imc0` остается неизменным для PS Vita 2000 и PS TV, и удаляется для PS Vita 1000
- + `GCD=ux0` остается неизменным для SD2Vita, и меняется на `UMA=ux0` для USB диска и psvd
- + `UMA=grw0` удаляется, кроме случая когда у вас несколько накопителей (в этом случае устройство не подключенное как `ux0:` будет подключено как `grw0:`)
+* The latest release of [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
+ + `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ + `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ + `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ + `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Инструкция
-#### Часть I - Установка плагинов
+#### Section I - Installing Plugins
1. Запустите приложение VitaShell
1. Нажмите (Select) чтобы включить доступ по FTP на консоли
1. Запустите FTP клиент на компьютере
1. Введите IP адрес и порт, отображаемые на консоли
-1. Используя FTP клиент, скопируйте все файлы из `ux0:tai/` в `ur0:tai/`
- + Перезаписывайте существующие файлы в папке `ur0:tai/`
- + Если у вас нет папки `ux0:tai/`, пропустите этот шаг
-1. Загрузите `storagemgr.skprx` в папку `ur0:tai/`
-1. Загрузите `storage_config.txt` в папку `ur0:tai/`
-1. Для всех путей в файле `ur0:tai/config.txt`, которые содержат `ux0:tai/`, замените `ux0:tai/` на `ur0:tai/`
- + Если у вас не было папки `ux0:tai/`, пропустите этот шаг
-1. Добавьте следующую строку в файл `ur0:tai/config.txt` сразу после строки `*KERNEL`:
+1. Using your FTP client, copy all files from `ux0:tai/` to `ur0:tai/`
+ + Overwrite any existing files in the `ur0:tai/` folder
+ + If you do not have a `ux0:tai/` folder, skip this step
+1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
+1. Transfer `storage_config.txt` to the `ur0:tai/` folder
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ + If you did not have a `ux0:tai/` folder, skip this step
+1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
-1. Удалите папку `ux0:tai/`
-
-#### Часть II - Восстановление данных
+1. Delete the `ux0:tai/` folder
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
+#### Section II - Restoring Data
В этой части мы скопируем все данные со старой карты памяти Sony на новый накопитель.
{: .notice--info}
-1. Сохраните все содержимое `ux0:` в папку на вашем компьютере
- + Это может занять некоторое время, если у вас много данных на карте памяти Sony
-1. Вставьте новый накопитель в компьютер
-1. Скопируйте содержимое папки с данными из `ux0:` на новый накопитель
- + Это может занять некоторое время, если у вас много данных на карте памяти Sony
- + Не копируйте саму папку `ux0:` на новый накопитель
-1. Вставьте новый накопитель в PS Vita (TV)
+1. Backup the contents of `ux0:` to a folder on your computer
+ + This may take some time if you have a large amount of data on your Sony memory card
+1. Insert your new storage device into your computer
+1. Copy the contents of your `ux0:` folder to your new storage device
+ + This may take some time if you have a large amount of data on your Sony memory card
+ + Do not copy the `ux0:` folder itself to your new storage device
+1. Insert your new storage device into your PS Vita (TV)
1. Нажмите (Круг) на консоли чтобы выключить доступ по FTP
1. Закройте приложение VitaShell
1. Перезагрузите консоль
+ Если на вашей консоли нет Ensō, то вам нужно вручную запустить и выйти из h-encore, чтобы восстановить доступ к хоумбрю
- + Это необходимо для запуска новых плагинов, добавленных в `ur0:tai/config.txt`
+ + This is required to load the new kernel plugins added to `ur0:tai/config.txt`
___
{% capture notice-1 %}
Если вы хотите освободить место на карте памяти (например для хранения игр PSP), вы можете удалить содержимое `uma0:` (новая точка монтирования карты памяти) и / или `imc0:` (если у вас PS Vita 2000 или PS TV).
-Если вы решили сделать это и используете h-encore на версии прошивки 3.67 или 3.68, то вы *не* должны удалять эти папки:
+Если вы решили сделать это, то вы *не* должны удалять следующие папки, если они существуют:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
Причина этого в том, что вы должны сохранить h-encore установленным на карту памяти, чтобы вы могли запустить HENkaku (и, следовательно, StorageMgr) после перезагрузки.
{% endcapture %}
{{ notice-1 | markdownify }}
-Ваш новый накопитель теперь настроен и готов к использованию в точке монтирования, указанной в файле `storage_config.txt`.
+Your new storage device is now configured and ready for use at the mount point specified in your `storage_config.txt`.
{: .notice--success}
diff --git a/_pages/ru_RU/troubleshooting.txt b/_pages/ru_RU/troubleshooting.txt
index df2c4f2a..c69ccf82 100644
--- a/_pages/ru_RU/troubleshooting.txt
+++ b/_pages/ru_RU/troubleshooting.txt
@@ -18,6 +18,7 @@ title: "Проблемы и их решения"
1. Запустите браузер, откройте настройки браузера
1. Прокрутите до конца вниз и нажмите "Delete Cookies" и "Clear Search History"
1. Попробуйте запустить эксплойт еще раз
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Удаление аккаунта PSN без форматирования устройства
@@ -30,4 +31,5 @@ title: "Проблемы и их решения"
1. Удерживайте L при включении, чтобы отключить плагины TaiHEN
1. Если консоль загружается, попробуйте отредактировать файл `ux0:tai/config.txt` и удалить недавно добавленные плагины
-1. Если эти инструкции не помогли, консоль, скорее всего, превратилась в брик
\ No newline at end of file
+1. Если эти инструкции не помогли, консоль, скорее всего, превратилась в брик
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/ru_RU/updating-firmware-(3.73).txt b/_pages/ru_RU/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..c40f3864
--- /dev/null
+++ b/_pages/ru_RU/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### Что понадобится
+
+* Подключение к интернету на PS Vita (TV)
+
+### Инструкция
+
+1. Перейдите в `Обновление системы` -> `Обновить с использованием Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + После завершения процесса консоль перезагрузится автоматически
+
+___
+
+### Следующий шаг: [Установка h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/ru_RU/updating-firmware-(ps-tv-3.65).txt b/_pages/ru_RU/updating-firmware-(ps-tv-3.65).txt
index d5a300d7..fd34cd5d 100644
--- a/_pages/ru_RU/updating-firmware-(ps-tv-3.65).txt
+++ b/_pages/ru_RU/updating-firmware-(ps-tv-3.65).txt
@@ -1,5 +1,5 @@
---
-title: "Updating Firmware (PS TV 3.65)"
+title: "Обновление прошивки (PS TV 3.65)"
redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
---
@@ -7,11 +7,11 @@ redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
### Обязательно к прочтению
-The h-encore exploit is only compatible with firmware versions 3.65 and above. Поэтому консоли с другой версией прошивки должны быть обновлены при помощи кастомного приложения для обновлений, чтобы использовать этот эксплойт.
+Эксплойт h-encore совместим только с версиями прошивки 3.65 и выше. Поэтому консоли с другой версией прошивки должны быть обновлены при помощи кастомного приложения для обновлений, чтобы использовать этот эксплойт.
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+Хотя эксплойт h-encore и совместим с более высокими версиями прошивки, пользователи с версией прошивки ниже 3.65 должны обновиться только до версии прошивки 3.65, поскольку это последняя версия, поддерживающая эксплойт Ensō.
-Обратите внимание, что кастомное приложение для обновлений может лишь увеличить версию прошивки, но не понизить её. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+Обратите внимание, что кастомное приложение для обновлений может лишь увеличить версию прошивки, но не понизить её. Если ваша версия прошивки выше 3.65, то вы должны вернуться к [Началу](get-started).
### Что понадобится
diff --git a/_pages/ru_RU/updating-firmware-(ps-vita-3.65).txt b/_pages/ru_RU/updating-firmware-(ps-vita-3.65).txt
index 70d9adcf..873c0e20 100644
--- a/_pages/ru_RU/updating-firmware-(ps-vita-3.65).txt
+++ b/_pages/ru_RU/updating-firmware-(ps-vita-3.65).txt
@@ -1,5 +1,5 @@
---
-title: "Updating Firmware (PS Vita 3.65)"
+title: "Обновление прошивки (PS Vita 3.65)"
redirect_from: /updating-firmware-(ps-vita-3.65-and-3.68)
---
@@ -7,11 +7,11 @@ redirect_from: /updating-firmware-(ps-vita-3.65-and-3.68)
### Обязательно к прочтению
-The h-encore exploit is only compatible with firmware versions 3.65 and above. Поэтому консоли с другой версией прошивки должны быть обновлены при помощи кастомного приложения для обновлений, чтобы использовать этот эксплойт.
+Эксплойт h-encore совместим только с версиями прошивки 3.65 и выше. Поэтому консоли с другой версией прошивки должны быть обновлены при помощи кастомного приложения для обновлений, чтобы использовать этот эксплойт.
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+Хотя эксплойт h-encore и совместим с более высокими версиями прошивки, пользователи с версией прошивки ниже 3.65 должны обновиться только до версии прошивки 3.65, поскольку это последняя версия, поддерживающая эксплойт Ensō.
-Обратите внимание, что кастомное приложение для обновлений может лишь увеличить версию прошивки, но не понизить её. If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+Обратите внимание, что кастомное приложение для обновлений может лишь увеличить версию прошивки, но не понизить её. Если ваша версия прошивки выше 3.65, то вы должны вернуться к [Началу](get-started).
### Что понадобится
@@ -44,7 +44,7 @@ While the h-encore exploit itself is compatible with higher firmware versions, u
1. Запустите приложение Настройки
1. Перейдите в `Обновление системы` -> `Обновить путем подключения к компьютеру`
-1. Ensure the update message "Version 3.65" is displayed, depending on which version you are attempting to update to
+1. Убедитесь, что отображается сообщение "Версия 3.65", в зависимости от того, до какой версии вы пытаетесь обновиться
+ Если отображается любое другое сообщение, остановитесь и выясните, что пошло не так
1. Следуйте инструкциям на экране, чтобы обновить консоль
+ После завершения процесса консоль перезагрузится автоматически
diff --git a/_pages/ru_RU/yamt.txt b/_pages/ru_RU/yamt.txt
new file mode 100644
index 00000000..a7f8684c
--- /dev/null
+++ b/_pages/ru_RU/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. Это весьма полезно, поскольку microSD карты значительно дешевле карт памяти Sony (особенно высокой емкости).
+
+Мы воспользуемся FTP (File Transfer Protocol) для передачи файлов, поэтому Vita и ПК должны быть подключены к одной сети.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### Что понадобится
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* FTP клиент, такой как [WinSCP](https://winscp.net/) или [CyberDuck](https://cyberduck.io/)
+ + Вместо этого можно использовать функцию USB transfer в приложении VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Инструкция
+
+#### Часть I - Подготовительные работы
+
+1. Запустите приложение VitaShell
+1. Нажмите (Select) чтобы включить доступ по FTP на консоли
+1. Запустите FTP клиент на компьютере
+1. Введите IP адрес и порт, отображаемые на консоли
+1. Используя FTP клиент, перейдите в `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Нажмите (Круг) на консоли чтобы выключить доступ по FTP
+
+#### Часть II - Установка VPK
+
+1. На консоли перейдите в `ux0:` -> `data/`
+1. Нажмите (Квадрат) на каждом из файлов `.vpk` чтобы выделить их
+1. Нажмите (Треугольник) чтобы открыть меню, затем выберите "More" -> "Install all" чтобы установить все выделенные файлы
+1. Нажмите (Крест) чтобы подтвердить установку
+1. Нажимайте (Крест) чтобы продолжить каждый раз, когда появляется запрос о расширенных правах
+1. Нажмите (Треугольник) чтобы открыть меню, затем выберите "Delete" чтобы удалить все выделенные файлы
+1. Нажмите (Крест) чтобы подтвердить удаление
+1. Закройте приложение VitaShell
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+В этой части мы скопируем все данные со старой карты памяти Sony на новый накопитель.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+Если вы хотите освободить место на карте памяти (например для хранения игр PSP), вы можете удалить содержимое `uma0:` (новая точка монтирования карты памяти) и / или `imc0:` (если у вас PS Vita 2000 или PS TV).
+
+Если вы решили сделать это, то вы *не* должны удалять следующие папки, если они существуют:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+Причина этого в том, что вы должны сохранить h-encore установленным на карту памяти, чтобы вы могли запустить HENkaku (и, следовательно, StorageMgr) после перезагрузки.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/sr_SP/adrenaline.txt b/_pages/sr_SP/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/sr_SP/adrenaline.txt
+++ b/_pages/sr_SP/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/sr_SP/blocking-updates.txt b/_pages/sr_SP/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/sr_SP/blocking-updates.txt
+++ b/_pages/sr_SP/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/sr_SP/credits.txt b/_pages/sr_SP/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/sr_SP/credits.txt
+++ b/_pages/sr_SP/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/sr_SP/donations.txt b/_pages/sr_SP/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/sr_SP/donations.txt
+++ b/_pages/sr_SP/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/sr_SP/faq.txt b/_pages/sr_SP/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/sr_SP/faq.txt
+++ b/_pages/sr_SP/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/sr_SP/finalizing-setup.txt b/_pages/sr_SP/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/sr_SP/get-started.txt b/_pages/sr_SP/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/sr_SP/get-started.txt
+++ b/_pages/sr_SP/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/sr_SP/home.txt b/_pages/sr_SP/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/sr_SP/home.txt
+++ b/_pages/sr_SP/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/sr_SP/installing-h-encore.txt b/_pages/sr_SP/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/sr_SP/installing-h-encore.txt
+++ b/_pages/sr_SP/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/sr_SP/installing-henkaku.txt b/_pages/sr_SP/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/sr_SP/installing-henkaku.txt
+++ b/_pages/sr_SP/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/sr_SP/storage-format-(mac).txt b/_pages/sr_SP/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/sr_SP/storage-format-(mac).txt
+++ b/_pages/sr_SP/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/sr_SP/storagemgr.txt b/_pages/sr_SP/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/sr_SP/storagemgr.txt
+++ b/_pages/sr_SP/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/sv_SE/adrenaline.txt b/_pages/sv_SE/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/sv_SE/adrenaline.txt
+++ b/_pages/sv_SE/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/sv_SE/blocking-updates.txt b/_pages/sv_SE/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/sv_SE/blocking-updates.txt
+++ b/_pages/sv_SE/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/sv_SE/credits.txt b/_pages/sv_SE/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/sv_SE/credits.txt
+++ b/_pages/sv_SE/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/sv_SE/donations.txt b/_pages/sv_SE/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/sv_SE/donations.txt
+++ b/_pages/sv_SE/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/sv_SE/faq.txt b/_pages/sv_SE/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/sv_SE/faq.txt
+++ b/_pages/sv_SE/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/sv_SE/get-started.txt
+++ b/_pages/sv_SE/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/sv_SE/home.txt
+++ b/_pages/sv_SE/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/sv_SE/installing-h-encore.txt b/_pages/sv_SE/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/sv_SE/installing-h-encore.txt
+++ b/_pages/sv_SE/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/sv_SE/installing-henkaku.txt b/_pages/sv_SE/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/sv_SE/installing-henkaku.txt
+++ b/_pages/sv_SE/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/sv_SE/storage-format-(mac).txt b/_pages/sv_SE/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/sv_SE/storage-format-(mac).txt
+++ b/_pages/sv_SE/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/sv_SE/storagemgr.txt b/_pages/sv_SE/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/sv_SE/storagemgr.txt
+++ b/_pages/sv_SE/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/th_TH/adrenaline.txt b/_pages/th_TH/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/th_TH/adrenaline.txt
+++ b/_pages/th_TH/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/th_TH/blocking-updates.txt b/_pages/th_TH/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/th_TH/blocking-updates.txt
+++ b/_pages/th_TH/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/th_TH/credits.txt b/_pages/th_TH/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/th_TH/credits.txt
+++ b/_pages/th_TH/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/th_TH/donations.txt b/_pages/th_TH/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/th_TH/donations.txt
+++ b/_pages/th_TH/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/th_TH/faq.txt b/_pages/th_TH/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/th_TH/faq.txt
+++ b/_pages/th_TH/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/th_TH/get-started.txt
+++ b/_pages/th_TH/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/th_TH/home.txt
+++ b/_pages/th_TH/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/th_TH/installing-h-encore.txt b/_pages/th_TH/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/th_TH/installing-h-encore.txt
+++ b/_pages/th_TH/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/th_TH/installing-henkaku.txt b/_pages/th_TH/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/th_TH/installing-henkaku.txt
+++ b/_pages/th_TH/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/th_TH/storage-format-(mac).txt b/_pages/th_TH/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/th_TH/storage-format-(mac).txt
+++ b/_pages/th_TH/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/th_TH/storagemgr.txt b/_pages/th_TH/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/th_TH/storagemgr.txt
+++ b/_pages/th_TH/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/tr_TR/adrenaline.txt b/_pages/tr_TR/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/tr_TR/adrenaline.txt
+++ b/_pages/tr_TR/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/tr_TR/blocking-updates.txt b/_pages/tr_TR/blocking-updates.txt
index 9876e09c..9166096e 100644
--- a/_pages/tr_TR/blocking-updates.txt
+++ b/_pages/tr_TR/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
-To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### What you need
* An internet connection on your PS Vita (TV)
### Instructions
-#### Section I - DNS Configuration
+#### Section I - Disabling the auto-download option
-Note that these DNS servers will need to be set on each network you connect your device to for it to block updates!
-{: .notice--warning}
-1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
-1. Set "Primary DNS" to `212.47.229.76`
-1. Leave "Secondary DNS" blank
-1. Ensure "Proxy Server" is set to "Do Not Use"
-1. Return to the main Settings menu
1. Navigate to `System` -> `Auto-Start Settings`
1. Uncheck "Download Update File for System Software"
1. Return to the main Settings menu
diff --git a/_pages/tr_TR/credits.txt b/_pages/tr_TR/credits.txt
index e3d033ee..10464089 100644
--- a/_pages/tr_TR/credits.txt
+++ b/_pages/tr_TR/credits.txt
@@ -9,14 +9,17 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/tr_TR/donations.txt b/_pages/tr_TR/donations.txt
index 57cd4d1c..3179d806 100644
--- a/_pages/tr_TR/donations.txt
+++ b/_pages/tr_TR/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/tr_TR/faq.txt b/_pages/tr_TR/faq.txt
index b6ac67f7..0e8de4ee 100644
--- a/_pages/tr_TR/faq.txt
+++ b/_pages/tr_TR/faq.txt
@@ -3,22 +3,22 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
-**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**Q:** *How risky is hacking my console?*
-**A:** Bricks are *basically* impossible unless you ignore instructions.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! This enables any custom user-made homebrew to be played on your device.
**Q:** *Where should I go for support?*
-**A:** For support, ask for help at [Vita Hacking on Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**Q:** *Can I do this without a computer?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/tr_TR/file-extensions-(windows).txt b/_pages/tr_TR/file-extensions-(windows).txt
index 814da6ee..b65b5bcc 100644
--- a/_pages/tr_TR/file-extensions-(windows).txt
+++ b/_pages/tr_TR/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ This will make it easier for you to find the referenced files in the rest of thi
#### Windows 10 / 8.1 / 8
1. Launch File Explorer by opening any directory, such as your SD card directory
-1. Click the "View" option on the ribbon menu
+1. Click the "View" option on the ribbon menu
1. Check the box labeled "File name extensions"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/tr_TR/finalizing-setup-(legacy).txt b/_pages/tr_TR/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..a252532b
--- /dev/null
+++ b/_pages/tr_TR/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+We will now setup applications and plugins such as the following:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(allows for encrypted games and applications to be used)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
++ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
++ **shellbat** *(displays exact battery percentage in the status bar)*
++ **pngshot** *(improves the built-in screenshot utility)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + You cannot use USB file transfer for this section
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:`
+ + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
+1. Delete the `tai` folder if it exists
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Navigate to `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Overwrite (replace) the existing `config.txt` file
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Press (Circle) on your device to close the FTP connection
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Launch the Settings application
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Close the Settings application
+
+#### Section V - PSN Access
+
+1. Launch the Settings application
+1. Navigate to `HENkaku Settings`
+1. Check "Enable PSN spoofing"
+1. Check "Enable Version Spoofing"
+1. Navigate to "Spoofed Version"
+1. Enter "3.73" into the box
+ + Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
+1. Close the Settings application
+
+___
+
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
+{: .notice--success}
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index 20e74b6f..c8f59b01 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -6,86 +6,51 @@ title: "Finalizing Setup"
### Required Reading
-We will now setup applications and plugins such as the following:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
-+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
-+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
-+ **shellbat** *(displays exact battery percentage in the status bar)*
-+ **pngshot** *(improves the built-in screenshot utility)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### What You Need
-* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
- + Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Instructions
-#### Section I - Prep Work
+#### Section I - Installing homebrew applications
-1. Launch the VitaShell application
-1. Press (Start) to open the VitaShell settings
-1. Press (Cross) on "SELECT button" to change the mode to "FTP"
- + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
- + Note that the USB transfer mode will start you in the ux0 partition
- + Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
-1. Press (Circle) to close the VitaShell settings
-1. Press (Select) to enable FTP access on your device
-1. Open your FTP client on your computer
-1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
- + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
- + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
-1. Delete the `tai` folder if it exists
-1. Navigate to `ur0:` -> `tai/`
-1. Transfer `config.txt` to the `tai` folder
- + Overwrite (replace) the existing `config.txt` file
-1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
-1. Transfer `download_enabler.suprx` to the `tai` folder
-1. Transfer `shellbat.suprx` to the `tai` folder
-1. Transfer `pngshot.suprx` to the `tai` folder
-1. Press (Circle) on your device to close the FTP connection
-
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
#### Section III - Blocking Updates
1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
- + You must apply the following DNS settings to each network you use
-1. Set "Primary DNS" to `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Ensure "Proxy Server" is set to "Do Not Use"
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Software`
1. Close the Settings application
#### Section IV - PSN Access
@@ -95,32 +60,19 @@ We will also block updates using a DNS server. The server tricks your device int
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
-
-1. Launch the Content Manager application
-1. Select "Manage Content on Memory Card"
-1. Select "PS Vita"
-1. Delete the following applications if they exist (note that, depending on your install method, some or all of these applications may be missing):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Users on firmware version 3.60 should additionally delete the following application if it exists:
- + "h-encore"
-1. Close the Content Manager application
-
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
{: .notice--danger}
-For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [StorageMgr](storagemgr) page.
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt
index 3272fdcd..d5ecb33d 100644
--- a/_pages/tr_TR/get-started.txt
+++ b/_pages/tr_TR/get-started.txt
@@ -11,7 +11,7 @@ Different device versions will require different steps to achieve the end goal o
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Your device version can be found under the System Information menu in the System category of the Settings application.
@@ -36,23 +36,16 @@ Your device version can be found under the System Information menu in the System
| 1.03 |
- 3.57 |
- Updating Firmware (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Installing HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt
index a7e96251..fe31d84b 100644
--- a/_pages/tr_TR/home.txt
+++ b/_pages/tr_TR/home.txt
@@ -62,8 +62,8 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
+ If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
diff --git a/_pages/tr_TR/installing-enso-(3.60).txt b/_pages/tr_TR/installing-enso-(3.60).txt
index 5a920f48..b9414662 100644
--- a/_pages/tr_TR/installing-enso-(3.60).txt
+++ b/_pages/tr_TR/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
#### Section I - Prep Work
-1. Launch the molecularShell application
+1. Launch the molecularShell or VitaShell application
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
@@ -38,7 +38,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
1. Press (Cross) to continue the install each time you are prompted about extended permissions
1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
1. Press (Cross) to confirm the deletion
-1. Close the molecularShell application
+1. Close the molecularShell or VitaShell application
#### Section III - Installing Ensō
@@ -49,5 +49,5 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/tr_TR/installing-enso-(3.65).txt b/_pages/tr_TR/installing-enso-(3.65).txt
index 4f5685c9..d803f131 100644
--- a/_pages/tr_TR/installing-enso-(3.65).txt
+++ b/_pages/tr_TR/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ Unfortunately, you may experience minor software incompatibilities as you will n
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/tr_TR/installing-enso.txt b/_pages/tr_TR/installing-enso.txt
new file mode 100644
index 00000000..005a1126
--- /dev/null
+++ b/_pages/tr_TR/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Ensō is a complete CFW solution for the PS Vita (TV) which allows for convenient homebrew access on your device by running an exploit at boot-time to setup the HENkaku homebrew environment.
+
+It is more convenient than HENkaku as it does not require you to trigger an exploit on your device after every reboot manually.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### What You Need
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Instructions
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/tr_TR/installing-h-encore.txt b/_pages/tr_TR/installing-h-encore.txt
index a1536ac4..1ca095b1 100644
--- a/_pages/tr_TR/installing-h-encore.txt
+++ b/_pages/tr_TR/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -21,60 +21,60 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
* The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- If you are using MacOS or Linux you will be required to compile finalhe yourself
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Instructions
#### Section I - finalhe
-1. Copy the contents of the finalhe `.zip` to a folder on your computer
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Launch finalhe on your computer
+ If you are prompted to allow finalhe network access through the firewall, do so
1. Launch the Content Manager application on your device
-1. Select "Copy Content"
-1. Select "PC"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
+1. Tap "PC"
1. Select the method you wish to use to connect to finalhe
+ If you are prompted to log-in to a PlayStation Network Account, do so
+ If you do not have a PlayStation Network Account, create one
-1. Select / register your computer if prompted
+1. Select or register your computer if prompted
+ If you encounter a message instructing you to update, reboot your device and try again
- + If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
- + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Section II - h-encore Transfer
-1. Select "Trim h-encore to ~13MB"
- + Only do this step if you are on 3.68 or below
-1. Select "Let's GO!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ The exploit files will be automatically downloaded and prepared
+ This process will take some time
-1. Select "PC -> PS Vita System" on your device
-1. Select "Applications"
-1. Select "PS Vita"
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Select "Copy"
-1. Select "OK"
- + The h-encore exploit will be copied to your device
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ This process will take some time
1. Close the Content Manager application on your device
1. Close finalhe on your computer
#### Section III - Configuring h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Launch the h-encore application while holding (R)
- + If prompted about trophies, continue holding (R) and select "Yes"
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. If the exploit was successful, you will now see the h-encore bootstrap menu
- + If the exploit is stuck on a white screen, simply close the application (which will cause a crash and reboot your device), then try again
- + If it is still stuck, hold the power button down for over 30 seconds to force a reboot, then try again
-1. Select "Install HENkaku"
- + This will install the HENkaku exploit and enable homebrew access until the next reboot
-1. Select "Download VitaShell"
- + This will install the VitaShell homebrew application for managing your device's filesystem
- + VitaShell (and all homebrew applications in general) will remain installed after a reboot, but will give an error on launch if the HENkaku exploit is not active
-1. Select "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Section IV - Configuring HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Return to HENkaku Settings menu
1. Close the Settings application
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/tr_TR/installing-henkaku.txt b/_pages/tr_TR/installing-henkaku.txt
index 7bb221a7..035824bd 100644
--- a/_pages/tr_TR/installing-henkaku.txt
+++ b/_pages/tr_TR/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku is an exploit chain for the PS Vita (TV) which will allow for the instal
Note that the HENkaku exploit chain is not "persistent" (meaning it does not remain installed after a reboot). Fortunately, this is only a temporary restriction until HENkaku Ensō is installed on the next page.
-In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analagous to the "administrator" mode on a computer.
+In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/tr_TR/installing-vitadeploy.txt b/_pages/tr_TR/installing-vitadeploy.txt
new file mode 100644
index 00000000..60309084
--- /dev/null
+++ b/_pages/tr_TR/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Table of Contents" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing the application
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/tr_TR/privacy-policy.txt b/_pages/tr_TR/privacy-policy.txt
index 43dc709a..f369502e 100644
--- a/_pages/tr_TR/privacy-policy.txt
+++ b/_pages/tr_TR/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-This site utilizes cookies in order to fascilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
### Embedded Content From Other Websites
diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt
index cdae3ebc..9e88c76d 100644
--- a/_pages/tr_TR/site-navigation.txt
+++ b/_pages/tr_TR/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Downgrading Firmware (3.65)](downgrading-firmware-(3.65))
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Finalizing Setup](finalizing-setup)
+ [Get Started](get-started)
+ [Home](/)
+ [Installing Ensō (3.60)](installing-enso-(3.60))
+ [Installing Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Installing h-encore](installing-h-encore)
+ [Installing HENkaku](installing-henkaku)
+ [Privacy Policy](privacy-policy)
+ [Storage Format (Linux)](storage-format-(linux))
+ [Storage Format (Mac)](storage-format-(mac))
+ [Storage Format (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Troubleshooting](troubleshooting)
+ [Updating Firmware (3.60)](updating-firmware-(3.60))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [Why Ads?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/tr_TR/storage-format-(mac).txt b/_pages/tr_TR/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/tr_TR/storage-format-(mac).txt
+++ b/_pages/tr_TR/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/tr_TR/storage-format-(windows).txt b/_pages/tr_TR/storage-format-(windows).txt
index 21305670..502274a8 100644
--- a/_pages/tr_TR/storage-format-(windows).txt
+++ b/_pages/tr_TR/storage-format-(windows).txt
@@ -64,4 +64,4 @@ If the test shows any other results, your storage device card may be corrupted o
___
### Return to [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/tr_TR/storagemgr.txt b/_pages/tr_TR/storagemgr.txt
index 71cb365f..3e6dd396 100644
--- a/_pages/tr_TR/storagemgr.txt
+++ b/_pages/tr_TR/storagemgr.txt
@@ -6,9 +6,9 @@ title: "StorageMgr"
### Required Reading
-StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
@@ -27,7 +27,7 @@ You must have already installed VitaShell to use this.
+ `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
- + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvd users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Instructions
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/tr_TR/troubleshooting.txt b/_pages/tr_TR/troubleshooting.txt
index ccbf5435..700875e0 100644
--- a/_pages/tr_TR/troubleshooting.txt
+++ b/_pages/tr_TR/troubleshooting.txt
@@ -18,6 +18,7 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Launch the browser, then open the browser settings
1. Scroll to the bottom and click "Delete Cookies" and "Clear Search History"
1. Try the exploit again
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Removing an PSN account without formatting your device
@@ -30,4 +31,5 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Hold L on boot to disable TaiHEN plugin loading
1. If your device boots, try editing `ux0:tai/config.txt` and remove any plugins you may have recently added
-1. If these instructions do not work, your device may be bricked
\ No newline at end of file
+1. If these instructions do not work, your device may be bricked
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/tr_TR/updating-firmware-(3.73).txt b/_pages/tr_TR/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..e3629971
--- /dev/null
+++ b/_pages/tr_TR/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/tr_TR/yamt.txt b/_pages/tr_TR/yamt.txt
new file mode 100644
index 00000000..525ebf32
--- /dev/null
+++ b/_pages/tr_TR/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### What You Need
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing VPKs
+
+1. On your device, navigate to `ux0:` -> `data/`
+1. Press (Square) on each of the `.vpk` files to mark them
+1. Press (Triangle) to open the menu, then select "More" -> "Install all" to install the marked files
+1. Press (Cross) to confirm the install
+1. Press (Cross) to continue the install each time you are prompted about extended permissions
+1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
+1. Press (Cross) to confirm the deletion
+1. Close the VitaShell application
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/uk_UA/adrenaline.txt b/_pages/uk_UA/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/uk_UA/adrenaline.txt
+++ b/_pages/uk_UA/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/uk_UA/blocking-updates.txt b/_pages/uk_UA/blocking-updates.txt
index 9876e09c..9166096e 100644
--- a/_pages/uk_UA/blocking-updates.txt
+++ b/_pages/uk_UA/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
-To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### What you need
* An internet connection on your PS Vita (TV)
### Instructions
-#### Section I - DNS Configuration
+#### Section I - Disabling the auto-download option
-Note that these DNS servers will need to be set on each network you connect your device to for it to block updates!
-{: .notice--warning}
-1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
-1. Set "Primary DNS" to `212.47.229.76`
-1. Leave "Secondary DNS" blank
-1. Ensure "Proxy Server" is set to "Do Not Use"
-1. Return to the main Settings menu
1. Navigate to `System` -> `Auto-Start Settings`
1. Uncheck "Download Update File for System Software"
1. Return to the main Settings menu
diff --git a/_pages/uk_UA/credits.txt b/_pages/uk_UA/credits.txt
index e3d033ee..10464089 100644
--- a/_pages/uk_UA/credits.txt
+++ b/_pages/uk_UA/credits.txt
@@ -9,14 +9,17 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/uk_UA/donations.txt b/_pages/uk_UA/donations.txt
index 57cd4d1c..3179d806 100644
--- a/_pages/uk_UA/donations.txt
+++ b/_pages/uk_UA/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/uk_UA/faq.txt b/_pages/uk_UA/faq.txt
index b6ac67f7..0e8de4ee 100644
--- a/_pages/uk_UA/faq.txt
+++ b/_pages/uk_UA/faq.txt
@@ -3,22 +3,22 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
-**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
+**A:** There is no need to update a PSVita with CFW. Stay on 3.60 or 3.65.
**Q:** *How risky is hacking my console?*
-**A:** Bricks are *basically* impossible unless you ignore instructions.
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Q:** *Can I run awesome homebrew and emulators with this?*
**A:** Yes! This enables any custom user-made homebrew to be played on your device.
**Q:** *Where should I go for support?*
-**A:** For support, ask for help at [Vita Hacking on Discord](https://discord.gg/JXEKeg6).
+**A:** For support, ask for help at [Official Henkaku Discord](https://discord.gg/m7MwpKA).
**Q:** *Can I do this without a computer?*
-**A:** No, you must have a PC to complete this guide.
+**A:** You must have a computer if you are on firmware version 3.61 or higher.
diff --git a/_pages/uk_UA/file-extensions-(windows).txt b/_pages/uk_UA/file-extensions-(windows).txt
index 814da6ee..b65b5bcc 100644
--- a/_pages/uk_UA/file-extensions-(windows).txt
+++ b/_pages/uk_UA/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ This will make it easier for you to find the referenced files in the rest of thi
#### Windows 10 / 8.1 / 8
1. Launch File Explorer by opening any directory, such as your SD card directory
-1. Click the "View" option on the ribbon menu
+1. Click the "View" option on the ribbon menu
1. Check the box labeled "File name extensions"
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/uk_UA/finalizing-setup-(legacy).txt b/_pages/uk_UA/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..a252532b
--- /dev/null
+++ b/_pages/uk_UA/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+We will now setup applications and plugins such as the following:
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(allows for encrypted games and applications to be used)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
++ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
++ **shellbat** *(displays exact battery percentage in the status bar)*
++ **pngshot** *(improves the built-in screenshot utility)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + You cannot use USB file transfer for this section
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:`
+ + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
+1. Delete the `tai` folder if it exists
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. Navigate to `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + Overwrite (replace) the existing `config.txt` file
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. Press (Circle) on your device to close the FTP connection
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. Launch the Settings application
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. Close the Settings application
+
+#### Section V - PSN Access
+
+1. Launch the Settings application
+1. Navigate to `HENkaku Settings`
+1. Check "Enable PSN spoofing"
+1. Check "Enable Version Spoofing"
+1. Navigate to "Spoofed Version"
+1. Enter "3.73" into the box
+ + Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
+1. Close the Settings application
+
+___
+
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
+{: .notice--success}
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index 20e74b6f..c8f59b01 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -6,86 +6,51 @@ title: "Finalizing Setup"
### Required Reading
-We will now setup applications and plugins such as the following:
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
-+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
-+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
-+ **shellbat** *(displays exact battery percentage in the status bar)*
-+ **pngshot** *(improves the built-in screenshot utility)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### What You Need
-* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
- + Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### Instructions
-#### Section I - Prep Work
+#### Section I - Installing homebrew applications
-1. Launch the VitaShell application
-1. Press (Start) to open the VitaShell settings
-1. Press (Cross) on "SELECT button" to change the mode to "FTP"
- + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
- + Note that the USB transfer mode will start you in the ux0 partition
- + Additionally, some files will be hidden in USB mode on Windows; you must enable "Show hidden files, folders, and drives" and disable "Hide protected operating system files" in the File Explorer options in order to see all files
-1. Press (Circle) to close the VitaShell settings
-1. Press (Select) to enable FTP access on your device
-1. Open your FTP client on your computer
-1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
- + The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
- + The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
-1. Delete the `tai` folder if it exists
-1. Navigate to `ur0:` -> `tai/`
-1. Transfer `config.txt` to the `tai` folder
- + Overwrite (replace) the existing `config.txt` file
-1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
-1. Transfer `download_enabler.suprx` to the `tai` folder
-1. Transfer `shellbat.suprx` to the `tai` folder
-1. Transfer `pngshot.suprx` to the `tai` folder
-1. Press (Circle) on your device to close the FTP connection
-
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
#### Section III - Blocking Updates
1. Launch the Settings application
-1. Navigate to `Network` -> `Wi-Fi Settings`
- + Connect to a Wi-Fi network if you have not already done so
-1. Select your current connection
- + This is signified by a green dot next to the network
-1. Select "Advanced Settings"
-1. Set "DNS Settings" to "Manual"
- + You must apply the following DNS settings to each network you use
-1. Set "Primary DNS" to `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. Ensure "Proxy Server" is set to "Do Not Use"
+1. Navigate to `System` -> `Auto-Start Settings`
+1. Uncheck the `Download Update File for System Software`
1. Close the Settings application
#### Section IV - PSN Access
@@ -95,32 +60,19 @@ We will also block updates using a DNS server. The server tricks your device int
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
-
-1. Launch the Content Manager application
-1. Select "Manage Content on Memory Card"
-1. Select "PS Vita"
-1. Delete the following applications if they exist (note that, depending on your install method, some or all of these applications may be missing):
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. Users on firmware version 3.60 should additionally delete the following application if it exists:
- + "h-encore"
-1. Close the Content Manager application
-
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
{: .notice--danger}
-For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [StorageMgr](storagemgr) page.
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
For information on installing CFW to the built-in PSP emulator, check out the [Adrenaline](adrenaline) page.
diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt
index 3272fdcd..d5ecb33d 100644
--- a/_pages/uk_UA/get-started.txt
+++ b/_pages/uk_UA/get-started.txt
@@ -11,7 +11,7 @@ Different device versions will require different steps to achieve the end goal o
Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
{: .notice--info}
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
Your device version can be found under the System Information menu in the System category of the Settings application.
@@ -36,23 +36,16 @@ Your device version can be found under the System Information menu in the System
| 1.03 |
- 3.57 |
- Updating Firmware (3.60) |
-
-
- | 3.60 |
- 3.60 |
- Installing HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt
index a7e96251..fe31d84b 100644
--- a/_pages/uk_UA/home.txt
+++ b/_pages/uk_UA/home.txt
@@ -62,8 +62,8 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
+ If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
diff --git a/_pages/uk_UA/installing-enso-(3.60).txt b/_pages/uk_UA/installing-enso-(3.60).txt
index 5a920f48..b9414662 100644
--- a/_pages/uk_UA/installing-enso-(3.60).txt
+++ b/_pages/uk_UA/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
#### Section I - Prep Work
-1. Launch the molecularShell application
+1. Launch the molecularShell or VitaShell application
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
@@ -38,7 +38,7 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
1. Press (Cross) to continue the install each time you are prompted about extended permissions
1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
1. Press (Cross) to confirm the deletion
-1. Close the molecularShell application
+1. Close the molecularShell or VitaShell application
#### Section III - Installing Ensō
@@ -49,5 +49,5 @@ It is more convenient than HENkaku as it does not require you to trigger an expl
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/uk_UA/installing-enso-(3.65).txt b/_pages/uk_UA/installing-enso-(3.65).txt
index 4f5685c9..d803f131 100644
--- a/_pages/uk_UA/installing-enso-(3.65).txt
+++ b/_pages/uk_UA/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ Unfortunately, you may experience minor software incompatibilities as you will n
___
-### Continue to [Finalizing Setup](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/uk_UA/installing-enso.txt b/_pages/uk_UA/installing-enso.txt
new file mode 100644
index 00000000..005a1126
--- /dev/null
+++ b/_pages/uk_UA/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+Ensō is a complete CFW solution for the PS Vita (TV) which allows for convenient homebrew access on your device by running an exploit at boot-time to setup the HENkaku homebrew environment.
+
+It is more convenient than HENkaku as it does not require you to trigger an exploit on your device after every reboot manually.
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### What You Need
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### Instructions
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/uk_UA/installing-h-encore.txt b/_pages/uk_UA/installing-h-encore.txt
index a1536ac4..1ca095b1 100644
--- a/_pages/uk_UA/installing-h-encore.txt
+++ b/_pages/uk_UA/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -21,60 +21,60 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
* The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- If you are using MacOS or Linux you will be required to compile finalhe yourself
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### Instructions
#### Section I - finalhe
-1. Copy the contents of the finalhe `.zip` to a folder on your computer
+1. Copy the contents of the finalhe `.zip` file to a folder on your computer
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + Do not extract this file
1. Launch finalhe on your computer
+ If you are prompted to allow finalhe network access through the firewall, do so
1. Launch the Content Manager application on your device
-1. Select "Copy Content"
-1. Select "PC"
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
+1. Tap "PC"
1. Select the method you wish to use to connect to finalhe
+ If you are prompted to log-in to a PlayStation Network Account, do so
+ If you do not have a PlayStation Network Account, create one
-1. Select / register your computer if prompted
+1. Select or register your computer if prompted
+ If you encounter a message instructing you to update, reboot your device and try again
- + If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
- + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### Section II - h-encore Transfer
-1. Select "Trim h-encore to ~13MB"
- + Only do this step if you are on 3.68 or below
-1. Select "Let's GO!"
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ The exploit files will be automatically downloaded and prepared
+ This process will take some time
-1. Select "PC -> PS Vita System" on your device
-1. Select "Applications"
-1. Select "PS Vita"
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. Select "Copy"
-1. Select "OK"
- + The h-encore exploit will be copied to your device
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ This process will take some time
1. Close the Content Manager application on your device
1. Close finalhe on your computer
#### Section III - Configuring h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. Launch the h-encore application while holding (R)
- + If prompted about trophies, continue holding (R) and select "Yes"
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. If the exploit was successful, you will now see the h-encore bootstrap menu
- + If the exploit is stuck on a white screen, simply close the application (which will cause a crash and reboot your device), then try again
- + If it is still stuck, hold the power button down for over 30 seconds to force a reboot, then try again
-1. Select "Install HENkaku"
- + This will install the HENkaku exploit and enable homebrew access until the next reboot
-1. Select "Download VitaShell"
- + This will install the VitaShell homebrew application for managing your device's filesystem
- + VitaShell (and all homebrew applications in general) will remain installed after a reboot, but will give an error on launch if the HENkaku exploit is not active
-1. Select "Exit"
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### Section IV - Configuring HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. Return to HENkaku Settings menu
1. Close the Settings application
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/uk_UA/installing-henkaku.txt b/_pages/uk_UA/installing-henkaku.txt
index 7bb221a7..035824bd 100644
--- a/_pages/uk_UA/installing-henkaku.txt
+++ b/_pages/uk_UA/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku is an exploit chain for the PS Vita (TV) which will allow for the instal
Note that the HENkaku exploit chain is not "persistent" (meaning it does not remain installed after a reboot). Fortunately, this is only a temporary restriction until HENkaku Ensō is installed on the next page.
-In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analagous to the "administrator" mode on a computer.
+In addition to running the HENkaku exploit, we will also enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/uk_UA/installing-vitadeploy.txt b/_pages/uk_UA/installing-vitadeploy.txt
new file mode 100644
index 00000000..60309084
--- /dev/null
+++ b/_pages/uk_UA/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="Table of Contents" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### What You Need
+
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Start) to open the VitaShell settings
+1. Press (Cross) on "SELECT button" to change the mode to "FTP"
+ + Alternatively, you can leave this setting on "USB" and transfer all files via a USB cable for the remainder of this guide
+1. Press (Circle) to close the VitaShell settings
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing the application
+
+1. Launch the VitaShell application
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. Press (Cross) to confirm the install
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/uk_UA/privacy-policy.txt b/_pages/uk_UA/privacy-policy.txt
index 43dc709a..f369502e 100644
--- a/_pages/uk_UA/privacy-policy.txt
+++ b/_pages/uk_UA/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-This site utilizes cookies in order to fascilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
### Embedded Content From Other Websites
diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt
index cdae3ebc..9e88c76d 100644
--- a/_pages/uk_UA/site-navigation.txt
+++ b/_pages/uk_UA/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [Downgrading Firmware (3.65)](downgrading-firmware-(3.65))
+ [FAQ](faq)
+ [File Extensions (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [Finalizing Setup](finalizing-setup)
+ [Get Started](get-started)
+ [Home](/)
+ [Installing Ensō (3.60)](installing-enso-(3.60))
+ [Installing Ensō (3.65)](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [Installing h-encore](installing-h-encore)
+ [Installing HENkaku](installing-henkaku)
+ [Privacy Policy](privacy-policy)
+ [Storage Format (Linux)](storage-format-(linux))
+ [Storage Format (Mac)](storage-format-(mac))
+ [Storage Format (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [Troubleshooting](troubleshooting)
+ [Updating Firmware (3.60)](updating-firmware-(3.60))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [Why Ads?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/uk_UA/storage-format-(mac).txt b/_pages/uk_UA/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/uk_UA/storage-format-(mac).txt
+++ b/_pages/uk_UA/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/uk_UA/storage-format-(windows).txt b/_pages/uk_UA/storage-format-(windows).txt
index 21305670..502274a8 100644
--- a/_pages/uk_UA/storage-format-(windows).txt
+++ b/_pages/uk_UA/storage-format-(windows).txt
@@ -64,4 +64,4 @@ If the test shows any other results, your storage device card may be corrupted o
___
### Return to [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/uk_UA/storagemgr.txt b/_pages/uk_UA/storagemgr.txt
index 71cb365f..3e6dd396 100644
--- a/_pages/uk_UA/storagemgr.txt
+++ b/_pages/uk_UA/storagemgr.txt
@@ -6,9 +6,9 @@ title: "StorageMgr"
### Required Reading
-StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvd.
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
@@ -27,7 +27,7 @@ You must have already installed VitaShell to use this.
+ `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
- + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvd users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### Instructions
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/uk_UA/troubleshooting.txt b/_pages/uk_UA/troubleshooting.txt
index ccbf5435..700875e0 100644
--- a/_pages/uk_UA/troubleshooting.txt
+++ b/_pages/uk_UA/troubleshooting.txt
@@ -18,6 +18,7 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Launch the browser, then open the browser settings
1. Scroll to the bottom and click "Delete Cookies" and "Clear Search History"
1. Try the exploit again
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## Removing an PSN account without formatting your device
@@ -30,4 +31,5 @@ Browser based exploits (such as the WebKit exploit used for HENkaku) can be unst
1. Hold L on boot to disable TaiHEN plugin loading
1. If your device boots, try editing `ux0:tai/config.txt` and remove any plugins you may have recently added
-1. If these instructions do not work, your device may be bricked
\ No newline at end of file
+1. If these instructions do not work, your device may be bricked
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/uk_UA/updating-firmware-(3.73).txt b/_pages/uk_UA/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..e3629971
--- /dev/null
+++ b/_pages/uk_UA/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### What you need
+
+* An internet connection on your PS Vita (TV)
+
+### Instructions
+
+1. Navigate to `System Update` -> `Update Using Wi-Fi`
+1. Follow the prompts to update your device to 3.73
+ + When the process has completed, your device will reboot automatically
+
+___
+
+### Continue to [Installing h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/uk_UA/yamt.txt b/_pages/uk_UA/yamt.txt
new file mode 100644
index 00000000..525ebf32
--- /dev/null
+++ b/_pages/uk_UA/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. This is very useful because microSD cards are significantly cheaper than Sony memory cards (especially at higher capacities).
+
+This will use FTP (File Transfer Protocol) to transfer the files, so your Vita and PC must be connected to the same network.
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### What You Need
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ + Alternatively, you can also use the USB transfer feature of VitaShell
+* The latest release of [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* The latest release of [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Launch the VitaShell application
+1. Press (Select) to enable FTP access on your device
+1. Open your FTP client on your computer
+1. Enter the IP Address and Port displayed on your device
+1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. Press (Circle) on your device to close the FTP connection
+
+#### Section II - Installing VPKs
+
+1. On your device, navigate to `ux0:` -> `data/`
+1. Press (Square) on each of the `.vpk` files to mark them
+1. Press (Triangle) to open the menu, then select "More" -> "Install all" to install the marked files
+1. Press (Cross) to confirm the install
+1. Press (Cross) to continue the install each time you are prompted about extended permissions
+1. Press (Triangle) to open the menu, then select "Delete" to delete the marked files
+1. Press (Cross) to confirm the deletion
+1. Close the VitaShell application
+
+#### Section III - Formatting the microSD
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### Section V - Restoring Data
+
+This section will copy the data from your old Sony memory card to your new storage device.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Open the VitaShell application
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/vi_VN/adrenaline.txt b/_pages/vi_VN/adrenaline.txt
index aa12fcb8..37f6beb6 100644
--- a/_pages/vi_VN/adrenaline.txt
+++ b/_pages/vi_VN/adrenaline.txt
@@ -47,7 +47,7 @@ You must have already installed VitaShell to use this.
1. Press (Circle) to return to `ux0:`
1. Navigate to `tai/`
- + If `urx:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
+ + If `ux0:tai` doesn't exist, press (Circle) again and then navigate to `ur0:tai`
1. Press (Cross) on `config.txt` to open it in the editor
1. Highlight the `*KERNEL` line with the cursor
1. Press (Triangle) to open the menu, then select "Insert empty line"
diff --git a/_pages/vi_VN/blocking-updates.txt b/_pages/vi_VN/blocking-updates.txt
index 9876e09c..f9a3a364 100644
--- a/_pages/vi_VN/blocking-updates.txt
+++ b/_pages/vi_VN/blocking-updates.txt
@@ -6,8 +6,6 @@ title: "Blocking Updates"
### Required Reading
-The latest PS Vita exploit is not compatible with version 3.71. As a result, we must wait for a new exploit to be released and stop the Vita updating any further than its current firmware version. Updating further may patch future exploits which could be used.
-
To prevent unwanted updates, we configure the device's DNS settings to use a custom update server which points to 3.60 as the latest update available. This has the effect of blocking any firmware versions above 3.60 from being installed when the device attempts to perform an update.
### What you need
diff --git a/_pages/vi_VN/credits.txt b/_pages/vi_VN/credits.txt
index e3d033ee..d60634df 100644
--- a/_pages/vi_VN/credits.txt
+++ b/_pages/vi_VN/credits.txt
@@ -9,9 +9,11 @@ If we forgot you here, contact us and we'll add your name.
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
@@ -19,4 +21,4 @@ If we forgot you here, contact us and we'll add your name.
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/vi_VN/donations.txt b/_pages/vi_VN/donations.txt
index 57cd4d1c..54244081 100644
--- a/_pages/vi_VN/donations.txt
+++ b/_pages/vi_VN/donations.txt
@@ -3,25 +3,8 @@ title: "Donations" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/vi_VN/faq.txt b/_pages/vi_VN/faq.txt
index b6ac67f7..ca1ee6d4 100644
--- a/_pages/vi_VN/faq.txt
+++ b/_pages/vi_VN/faq.txt
@@ -3,10 +3,10 @@ title: "FAQ"
---
**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** Yes, 3.73 is hackable at the moment.
**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, the tool Modoru can downgrade any system hacked with HENkaku or h-encore to any firmware equal or greater than the firmware the console came with out of the box.
**Q:** *Is it safe to update a Vita with CFW?*
**A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index 20e74b6f..784c0056 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -8,9 +8,8 @@ title: "Finalizing Setup"
We will now setup applications and plugins such as the following:
-+ **Vita Homebrew Browser** *(downloads and installs other homebrew applications)*
+ **NoNpDrm** *(allows for encrypted games and applications to be used)*
-+ **reF00D** *(allows for transparently decrypting games and applications of any firmware version)*
++ **0syscall6** *(allows using games and applications that require higher firmware versions)*
+ **DownloadEnabler** *(allows any file type to be downloaded with the browser)*
+ **shellbat** *(displays exact battery percentage in the status bar)*
+ **pngshot** *(improves the built-in screenshot utility)*
@@ -23,11 +22,9 @@ We will also block updates using a DNS server. The server tricks your device int
* An FTP Client such as [WinSCP](https://winscp.net/) or [CyberDuck](https://cyberduck.io/)
+ Alternatively, you can also use the USB transfer feature of VitaShell
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
* The latest release of [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* The latest release of [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
+* The latest release of [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
* The latest release of [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
* The latest release of [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
* The latest release of [pngshot](https://github.com/xyzz/pngshot/releases/latest)
@@ -46,34 +43,21 @@ We will also block updates using a DNS server. The server tricks your device int
1. Press (Select) to enable FTP access on your device
1. Open your FTP client on your computer
1. Enter the IP Address and Port displayed on your device
-1. Using your FTP client, navigate to `ux0:` -> `data/`
+1. Using your FTP client, navigate to `ux0:`
+ The `ux0:` partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
+ The `ur0:` partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is *not* the same as the built-in memory card!)
-1. Transfer `VitaHBBrowser.vpk` to the `data` folder
-1. Using your FTP client, navigate to `ux0:`
1. Delete the `tai` folder if it exists
1. Navigate to `ur0:` -> `tai/`
1. Transfer `config.txt` to the `tai` folder
+ Overwrite (replace) the existing `config.txt` file
1. Transfer `nonpdrm.skprx` to the `tai` folder
-1. Transfer `reF00D.skprx` to the `tai` folder
-1. Transfer `keys.bin` to the `tai` folder
+1. Transfer `0syscall6.skprx` to the `tai` folder
1. Transfer `download_enabler.suprx` to the `tai` folder
1. Transfer `shellbat.suprx` to the `tai` folder
1. Transfer `pngshot.suprx` to the `tai` folder
1. Press (Circle) on your device to close the FTP connection
-#### Section II - Installing VPKs
-
-1. On your device, navigate to `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
-1. Press (Cross) to confirm the install
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. Press (Cross) to confirm the deletion
-1. Close the VitaShell application
-
-#### Section III - Blocking Updates
+#### Section II - Blocking Updates
1. Launch the Settings application
1. Navigate to `Network` -> `Wi-Fi Settings`
@@ -88,18 +72,18 @@ We will also block updates using a DNS server. The server tricks your device int
1. Ensure "Proxy Server" is set to "Do Not Use"
1. Close the Settings application
-#### Section IV - PSN Access
+#### Section III - PSN Access
1. Launch the Settings application
1. Navigate to `HENkaku Settings`
1. Check "Enable PSN spoofing"
1. Check "Enable Version Spoofing"
1. Navigate to "Spoofed Version"
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
1. Close the Settings application
-#### Section V - Cleanup
+#### Section IV - Cleanup
1. Launch the Content Manager application
1. Select "Manage Content on Memory Card"
@@ -114,7 +98,7 @@ We will also block updates using a DNS server. The server tricks your device int
___
-You can now easily install new homebrew applications just by using Vita Homebrew Browser. Alternatively, you can also browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt
index 3272fdcd..4ebc5c60 100644
--- a/_pages/vi_VN/get-started.txt
+++ b/_pages/vi_VN/get-started.txt
@@ -51,7 +51,7 @@ Your device version can be found under the System Information menu in the System
| 3.65 |
- 3.72 |
+ 3.73 |
Installing h-encore |
diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt
index a7e96251..7ba887f1 100644
--- a/_pages/vi_VN/home.txt
+++ b/_pages/vi_VN/home.txt
@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
## What do I need to know before starting?
+ **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.73
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
+ **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
+ The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.
diff --git a/_pages/vi_VN/installing-h-encore.txt b/_pages/vi_VN/installing-h-encore.txt
index a1536ac4..8998dcd6 100644
--- a/_pages/vi_VN/installing-h-encore.txt
+++ b/_pages/vi_VN/installing-h-encore.txt
@@ -6,13 +6,13 @@ title: Installing h-encore
### Required Reading
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.73.
Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.73, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
{: .notice--info}
@@ -39,7 +39,7 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
+ If you encounter a message instructing you to update, reboot your device and try again
+ If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
+ If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) and try again
#### Section II - h-encore Transfer
diff --git a/_pages/vi_VN/installing-henkaku.txt b/_pages/vi_VN/installing-henkaku.txt
index 7bb221a7..f22d982f 100644
--- a/_pages/vi_VN/installing-henkaku.txt
+++ b/_pages/vi_VN/installing-henkaku.txt
@@ -29,7 +29,10 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
1. Read the disclaimer, then tap "Install"
+ If you get an error and cannot proceed, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
1. If the exploit was successful, you will now have a bubble on your LiveArea screen named "molecularShell".
- + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install MolecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### Section II - Configuring HENkaku
diff --git a/_pages/vi_VN/storage-format-(mac).txt b/_pages/vi_VN/storage-format-(mac).txt
index 41a13a62..79997df2 100644
--- a/_pages/vi_VN/storage-format-(mac).txt
+++ b/_pages/vi_VN/storage-format-(mac).txt
@@ -22,11 +22,13 @@ This page is for Mac users only. If you are not on Mac, check out the [Storage F
#### Section I - Formatting Storage Device
1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. Open the Terminal app
+1. Enter `diskutil list` into the terminal
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
#### Section II - Verifying Storage Device
diff --git a/_pages/vi_VN/storagemgr.txt b/_pages/vi_VN/storagemgr.txt
index 71cb365f..538be696 100644
--- a/_pages/vi_VN/storagemgr.txt
+++ b/_pages/vi_VN/storagemgr.txt
@@ -43,12 +43,13 @@ You must have already installed VitaShell to use this.
+ If you do not have a `ux0:tai/` folder, skip this step
1. Transfer `storagemgr.skprx` to the `ur0:tai/` folder
1. Transfer `storage_config.txt` to the `ur0:tai/` folder
-1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+1. For any paths in `ur0:tai/config.txt` which contain `ux0:tai/`, replace `ux0:tai/` with `ur0:tai/`
+ If you did not have a `ux0:tai/` folder, skip this step
1. Add the following line to `ur0:tai/config.txt` under the `*KERNEL` line:
+ `ur0:tai/storagemgr.skprx`
1. Delete the `ux0:tai/` folder
-
+ + This is an important step as HENkaku will not load plugins installed in `ur0:tai` if it detects that `ux0:tai` exists
+
#### Section II - Restoring Data
This section will copy the data from your old Sony memory card to your new storage device.
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
If you want to reclaim the space on your memory card (to use for storing PSP games for instance), you can delete the contents of `uma0:` (the new memory card mount point) and / or `imc0:` (if you have a PS Vita 2000 or PS TV).
-If you decide to do this and are using h-encore on firmware versions 3.67 or 3.68, you must *not* delete these folders:
+If you decide to do this, you must *not* delete these folders if they exist:
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
This is because you must keep h-encore installed to the memory card so you can enable HENkaku (and therefore StorageMgr) after a reboot.
{% endcapture %}
diff --git a/_pages/zh_CN/adrenaline.txt b/_pages/zh_CN/adrenaline.txt
index b248b93b..b68b838e 100644
--- a/_pages/zh_CN/adrenaline.txt
+++ b/_pages/zh_CN/adrenaline.txt
@@ -47,7 +47,7 @@ Adrenaline 是 PS Vita 的一个自制程序。它可以修改 PS Vita (TV) 中
1. 按下 “○” 键返回到 `ux0:`
1. 打开 `tai/` 文件夹
- + 如果没有 `urx:tai` 这个文件夹, 请再次按下 “○” 键, 然后移动到 `ur0:tai` 文件夹
+ + 如果没有 `ux0:tai` 这个文件夹, 请再次按下 “○” 键, 然后移动到 `ur0:tai` 文件夹
1. 在 `config.txt` 上按下 “×” 键以在编辑器中打开它
1. 移动光标至 `*KERNEL` 行
1. 按下 “△” 键打开菜单, 然后选择 “插入空行(Insert empty line)”
diff --git a/_pages/zh_CN/blocking-updates.txt b/_pages/zh_CN/blocking-updates.txt
index 93c0580c..a194e418 100644
--- a/_pages/zh_CN/blocking-updates.txt
+++ b/_pages/zh_CN/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "阻止更新"
### 必读事项
-最新公布的 PS Vita 漏洞并不兼容 3.71 或者更高的系统版本的主机。 所以, 在我们等待一个新的漏洞被挖掘出之前，我们需要阻止当前的系统固件系统更新。 因为更新很可能会把之后发现的新的漏洞也一并修复。
-
-为此，我们将你的设备的网络 DNS 设置配置为我们自制的更新服务器，它将使设备认为 3.60 是最新版本。 这会在设备尝试系统更新时无法升级 3.60 以上的系统版本。
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### 你需要准备点啥？
* 将你的 PS Vita (TV) 连接上网络
### 操作步骤
-#### 第一步 － 设置 DNS
+#### 第一步 – 禁用自动下载选项
-请注意，这些 DNS 服务器需要在每一个用于连接你设备的网络中进行设置才能阻止更新!
-{: .notice--warning}
-1. 打开系统设置
-1. 依次进入 `网络(Network)` -> `Wi-Fi 设定(Wi-Fi Settings)`
- + 如果你之前没有联网，那么现在请连接到 Wi-Fi 网络
-1. 选择你想使用的接入点
- + 已连接的网络旁边会有绿色的点
-1. 选择 “高级设置(Advanced Settings)”
-1. 找到 “DNS 设置(DNS Settings)” 并将它设置为“手动(Manual)”
-1. 将 “主DNS(Primary DNS)” 设置为 `212.47.229.76`
-1. 将“备用 DNS(Secondary DNS)” 留空
-1. 确认“代理服务器 (Proxy)” 设置为 “不使用(Do Not Use)”
-1. 返回到设置的主菜单
1. 移动至 `系统(System)` -> `自动启动设置(Auto-Start Settings)`
1. 取消 “下载系统软件的更新文件(Download Update File for System Software)”
1. 返回到设置的主菜单
diff --git a/_pages/zh_CN/credits.txt b/_pages/zh_CN/credits.txt
index 4adf8a4e..d68c4fd0 100644
--- a/_pages/zh_CN/credits.txt
+++ b/_pages/zh_CN/credits.txt
@@ -9,14 +9,17 @@ title: "致谢"
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/zh_CN/donations.txt b/_pages/zh_CN/donations.txt
index 051c8ff5..e033fae8 100644
--- a/_pages/zh_CN/donations.txt
+++ b/_pages/zh_CN/donations.txt
@@ -3,25 +3,8 @@ title: "捐助" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/zh_CN/downgrading-firmware-(3.60).txt b/_pages/zh_CN/downgrading-firmware-(3.60).txt
index f26ffa6c..36fc7d7e 100644
--- a/_pages/zh_CN/downgrading-firmware-(3.60).txt
+++ b/_pages/zh_CN/downgrading-firmware-(3.60).txt
@@ -8,11 +8,11 @@ title: 降级系统 (3.60)
Ensō 是 PS Vita（TV）使用自制固件的一套解决方案，依靠本方案，可在你的主机开机时自动配置HENkaku环境，可以在你的设备上方便地使用自制软件。
-It is more convenient than h-encore as it does not require you to trigger an exploit on your device after every reboot manually.
+它比 h-encore 更方便，因为其他自制系统需要在每次设备重启后手动触发漏洞进入破解模式。
-While it is possible to run homebrew on most firmware versions, downgrading to firmware version 3.60 will provide you with the greatest homebrew compatibility.
+虽然自制程序可以在其他版本的系统中运行，但降级到 3.60 可以使你得到运行自制程序的最佳兼容性。
-自reF00D系统插件发布以来，让设备运行 3.60 系统的缺点几乎没有（如果有的话），因为这个插件允许你安装和玩任何需要更新系统版本的游戏。
+自reF00D系统插件发布以来，让设备运行 3.60 系统的缺点几乎没有，因为这个插件允许你安装和玩任何需要更新系统版本的游戏。
有一个坏消息是，有少部分的设备由于“出厂版本”过高而无法降级到 3.60。 如果你遇到这种情况时，之后将提供进一步的说明。
@@ -24,7 +24,7 @@ While it is possible to run homebrew on most firmware versions, downgrading to f
* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ 或者，你也可以使用 VitaShell 的 USB 传输功能
* - [PSP2UPDAT.PUP](magnet:?xt=urn:btih:19720f56ab6a299292f009aebae67a9a50eb6e8a&dn=PSP2UPDAT.PUP&tr=udp%3A%2F%2Ftracker.leechers-paradise.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker2.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce) (3.60) ([mirror](https://web.archive.org/web/20160902205052id_/http://dus01.psp2.update.playstation.net/update/psp2/image/2016_0323/rel_cd80b3da55771c99557db552542dff2b/PSP2UPDAT.PUP))
-* The latest release of [modoru](https://github.com/SKGleba/modoru/releases/latest/)
+* 最新版 [modoru](https://github.com/SKGleba/modoru/releases/latest/)
#### 第一步 — 准备工作
diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt
index 9f877496..666cb897 100644
--- a/_pages/zh_CN/faq.txt
+++ b/_pages/zh_CN/faq.txt
@@ -3,22 +3,22 @@ title: "常见问题"
---
**问:** *我的系统是最新版本，可以破解吗?*
-**A:** Yes, 3.72 is hackable at the moment.
+**答：** 是的，3.73 目前是可以破解的。
-**Q:** *我能降级我的 Vita 吗？*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**问：** *我能降级我的 Vita 吗？*
+**答：** 是的，Modoru可以将任何被HENkaku或H-Encore破解的系统降级到任何等于或大于设备开箱时的固件。
-**Q:** *在使用自制固件的时候升级 Vita 安全吗?*
-**A:** 不！ 你必须始终确保已按[完成安装](finalizing-setup)结尾处的方法阻止更新。
+**问：** *在使用自制固件的时候升级 Vita 安全吗?*
+**答：**没有必要升级安装了自制固件的 PSVita。 请留在 3.60 或 3.65 版本。
-**Q: ** *破解我的机器风险有多大？*
-**A:** 除非你忽略教程的指示，否则砖机基本上是*不可能*的。
+**问： ** *破解我的机器风险有多大？*
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
-**Q:** *我可以通过这个破解来运行自制程序和模拟器吗？*
-**A:** 可以！ 通过本教程可以在你的设备上开启任何用户自制的自制程序。
+**问：** *我可以通过这个破解来运行自制程序和模拟器吗？*
+**答：** 可以！ 通过本教程可以在你的设备上开启任何用户自制的自制程序。
-**Q:** *如果我遇到麻烦可以在哪寻求帮助?*
-**A:** 如需支援，请加入 [Vita Hacking Discord服务器](https://discord.gg/JXEKeg6)。
+**问：** *如果我遇到麻烦可以在哪寻求帮助?*
+**答：** 如需支援，请加入 [官方 Henkaku Discord 服务器](https://discord.gg/m7MwpKA)。
-**Q:** *我能在没有电脑的时候完成这个教程吗？*
-**A:** 不，你必须要有一台电脑才能完成这个教程。
+**问：** *我能在没有电脑的时候完成这个教程吗？*
+**答：**当你的主机系统版本在 3.61 以上时则必须用到电脑。
diff --git a/_pages/zh_CN/file-extensions-(windows).txt b/_pages/zh_CN/file-extensions-(windows).txt
index a14711f0..ed87c70b 100644
--- a/_pages/zh_CN/file-extensions-(windows).txt
+++ b/_pages/zh_CN/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ Windows 显示扩展名后，你可以更快找到本教程需要的文件。
#### Windows 10 / 8.1 / 8
1. 打开任意一个目录来启动文件管理器，例如SD卡目录
-1. 点击窗口上方的“查看”按钮
+1. 点击窗口上方的“查看”按钮
1. 把“文件扩展名”打勾
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/zh_CN/finalizing-setup-(legacy).txt b/_pages/zh_CN/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..26d82f79
--- /dev/null
+++ b/_pages/zh_CN/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="内容目录" %}
+
+### 必读事项
+
+我们现在将安装如下所示的应用程序和插件：
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *（允许使用已加密的游戏和应用程序）*
++ **0syscall6** *（允许使用需要更高固件版本的游戏和应用程序）*
++ **DownloadEnabler** *（允许使用浏览器下载任何类型的文件）*
++ **shellbat** *(在状态栏中显示准确的电池百分比)*
++ **pngshot** *(改进内置的屏幕截图程序)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+为了在你的设备安装必要的 `.vpk` 安装包，我们使用 [FTP](https://zh.m.wikipedia.org/wiki/%E6%96%87%E4%BB%B6%E4%BC%A0%E8%BE%93%E5%8D%8F%E8%AE%AE) 来将文件复制到你设备的内存卡。
+
+### 你需要准备点啥？
+
+* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* The latest release of [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* The latest release of [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* 最新版 [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* 最新版 [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* 最新版 [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* 最新版 [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* 最新版 [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The latest release of [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### 操作步骤
+
+#### 第一步 — 准备工作
+
+1. 启动 VitaShell 应用
+1. 按下 “Start” 键来打开 VitaShell 的设置
+1. 在 “SELECT button” 上按下×键来切换模式为“FTP”
+ + You cannot use USB file transfer for this section
+1. 按下 “○” 关闭 VitaShell settings
+1. 按下 “Select” 键以启用设备上的 FTP 访问
+1. 在电脑上打开 FTP 客户端
+1. 输入设备上显示的 IP 地址与端口
+1. 通过 FTP 客户端移动至 `ux0:`
+ + `ux0:` 分区代表你设备上内存卡的分区 (在 PS Vita 1000中，这个分区永远指的是外部内存卡；在 PS Vita 2000 和 PS TV 中，如果插入了一个外部存储卡，则该分区为外部存储卡，反之则为内置存储)
+ + `ur0:` 分区代表你主机的系统内存，此分区永远存在于任何版本的主机中 (在 PS Vita 2000 和 PS TV 中，这可*不是*指内部存储！)
+1. 如果有 `tai` 文件夹请删除
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. 移动至 `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + 覆盖任何现有的 `config.txt` 文件
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. 在你的主机上按下 “○” 键以关闭 FTP 连接
+ + 如需更多关于插件和它们的安装方式的信息，请阅读[这个页面](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### Section II - Installing homebrew applications
+
+1. 启动 VitaShell 应用
+1. Navigate to `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. 按下 “×” 键确认安装
+1. Press (Cross) to confirm the install again when prompted
+
+#### Section III - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section IV - Blocking Updates
+
+1. 打开系统设置
+1. 移动至 `系统(System)` -> `自动启动设置(Auto-Start Settings)`
+1. 取消 `下载系统软件的更新文件（Download Update File for System Software）`
+1. 关闭系统设置
+
+#### Section V - PSN Access
+
+1. 打开系统设置
+1. 移动至 `HENkaku Settings`
+1. 勾选 “启用PSN伪装(Enable PSN spoofing)”
+1. 勾选 “开启版本伪装(Enable Version Spoofing)”
+1. 移动至“版本伪装(Spoofed Version)”
+1. 输入 “3.73” 到框中
+ + 如果以后索尼更新了系统固件，则你必须把其数值替换成最新版本才能访问 PSN
+1. 关闭系统设置
+
+___
+
+你可以到 [VitaDB](https://vitadb.rinnegatamante.it/) 上寻找新的自制程序。
+{: .notice--info}
+
+*不建议*通过安装高级用户自制程序（例如“Enso EX”）来更改自制固件的安装情况。 在没有完全理解系统运作的情况下这样做会导致*砖机*！
+{: .notice--danger}
+
+如果你想用其他的内存卡来代替原厂的索尼内存卡（比如 MicroSD 卡或者 USB 硬盘），请参见 [YAMT](yamt)。
+{: .notice--success}
+
+若你想要在内置的 PSP 模拟器中安装自制固件，请参见[Adrenaline](adrenaline)。
+{: .notice--success}
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index 4334df68..3063c5d1 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -6,121 +6,73 @@ title: "完成安装"
### 必读事项
-我们现在将安装如下所示的应用程序和插件：
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(下载并安装其他自制程序)*
-+ **NoNpDrm** *(允许使用已加密的游戏和应用程序)*
-+ **reF00D** *(透明化解密任何固件版本的游戏和应用程序)*
-+ **DownloadEnabler** *(允许使用浏览器下载任何类型的文件)*
-+ **shellbat** *(在状态栏中显示准确的电池百分比)*
-+ **pngshot** *(改进内置的屏幕截图程序)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-为了在你的设备安装必要的 `.vpk` 安装包，我们使用 [FTP](https://zh.m.wikipedia.org/wiki/%E6%96%87%E4%BB%B6%E4%BC%A0%E8%BE%93%E5%8D%8F%E8%AE%AE) 来将文件复制到你设备的内存卡。
-
-我们还将使用 DNS 服务器来阻止系统更新。 DNS 服务器将使主机认为 3.60 是最新版本，而不会更新到 3.60 之后的版本。 这是非常有用的，因为 3.60 是能运行 HENkaku 的最早固件。 你必须在每个你想连接的网络中都做一次才能阻止系统更新。
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### 你需要准备点啥？
-* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
- + 或者，你也可以使用 VitaShell 的 USB 传输功能
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* 最新版 [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* 最新版 [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* 最新版 [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* 最新版 [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* 最新版 [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* 最新版 [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### 操作步骤
-#### 第一步 — 准备工作
+#### Section I - Installing homebrew applications
-1. 启动 VitaShell 应用
-1. 按下 “Start” 键来打开 VitaShell 的设置
-1. 在 “SELECT button” 上按下×键来切换模式为“FTP”
- + 或者你也可以切换成USB模式并通过其传输方式来传输所需文件
- + 注意，如果你使用 USB 传输模式，连接的分区将是 ux0 分区
- + 另外，有些文件会在 USB 模式时会被Windows隐藏；你必须在资源管理器的查看设置中选择“显示隐藏的文件、文件夹和驱动器”和并去掉“隐藏受保护的操作系统文件（推荐）”
-1. 按下 “○” 关闭 VitaShell settings
-1. 按下 “Select” 键以启用设备上的 FTP 访问
-1. 在电脑上打开 FTP 客户端
-1. 输入设备上显示的 IP 地址与端口
-1. 使用客户端移动至 `ux0:` -> `data/`
- + `ux0:` 分区代表你设备上内存卡的分区 (在 PS Vita 1000中，这个分区永远指的是外部内存卡；在 PS Vita 2000 和 PS TV 中，如果插入了一个外部存储卡，则该分区为外部存储卡，反之则为内置存储)
- + `ur0:` 分区代表你主机的系统内存，此分区永远存在于任何版本的主机中 (在 PS Vita 2000 和 PS TV 中，这可*不是*指内部存储！)
-1. 复制 `VitaHBBrowser.vpk` 到 `data` 文件夹
-1. 通过 FTP 客户端移动至 `ux0:`
-1. 如果有 `tai` 文件夹请删除
-1. 移动至 `ur0:` -> `tai/`
-1. 复制 `config.txt` 到 `tai` 文件夹
- + 覆盖任何现有的 `config.txt` 文件
-1. 复制 `nonpdrm.skprx` 到 `tai` 文件夹
-1. 复制 `reF00D.skprx` 到 `tai` 文件夹
-1. 复制 `keys.bin` 到 `tai` 文件夹
-1. 复制 `download_enabler.suprx` 到 `tai` 文件夹
-1. 复制 `shellbat.suprx` 到 `tai` 文件夹
-1. 复制 `pngshot.suprx` 到 `tai` 文件夹
-1. 在你的主机上按下 “○” 键以关闭 FTP 连接
-
-#### 第二步 － 安装 .vpk 文件
-
-1. 在你的设备上移动至 `ux0:` -> `data/`
-1. 在 `VitaHBBrowser.vpk` 上按 “×” 键以进行安装
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. 按下 “×” 键确认安装
-1. 当系统提示有关 “扩展权限(extended permissions)” 的时候, 按 “×” 键确认以继续安装
-1. 按下 “△” 键打开菜单, 然后选择 “Delete” 以删除 `.vpk` 文件
-1. 按下 “×” 键确认删除
-1. 关闭 VitaShell 应用
+1. Press (Cross) to confirm the install again when prompted
-#### 第三步 — 阻止更新
+#### Section II - Installing iTLS
+
+1. Open the iTLS-Enso application
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### Section III - Blocking Updates
1. 打开系统设置
-1. 依次进入 `网络(Network)` -> `Wi-Fi 设定(Wi-Fi Settings)`
- + 如果你之前没有联网，那么现在请连接到 Wi-Fi 网络
-1. 选择你想使用的接入点
- + 已连接的网络旁边会有绿色的点
-1. 选择 “高级设置(Advanced Settings)”
-1. 找到 “DNS 设置(DNS Settings)” 并将它设置为“手动(Manual)”
- + 你必须在每个你想连接的网络中都做一次。
-1. 将 “主DNS(Primary DNS)” 设置为 `212.47.229.76`
-1. 将 “备用DNS(Secondary DNS)” 设为 `212.47.229.76`
-1. 确认“代理服务器 (Proxy)” 设置为 “不使用(Do Not Use)”
+1. 移动至 `系统(System)` -> `自动启动设置(Auto-Start Settings)`
+1. Uncheck the `Download Update File for System Software`
1. 关闭系统设置
-#### 第四步 — PSN 访问
+#### Section IV - PSN Access
1. 打开系统设置
1. 移动至 `HENkaku Settings`
1. 勾选 “启用PSN伪装(Enable PSN spoofing)”
1. 勾选 “开启版本伪装(Enable Version Spoofing)”
1. 移动至“版本伪装(Spoofed Version)”
-1. Enter "3.72" into the box
+1. 输入 “3.73” 到框中
+ 如果以后索尼更新了系统固件，则你必须把其数值替换成最新版本才能访问 PSN
1. 关闭系统设置
-#### 第五步 — 清理文件
-
-1. 启动“内容管理器”程序
-1. 选择 “管理内存卡的内容(Manage Content on Memory Card)”
-1. 选择 “PS Vita”
-1. 如果你看到有以下程序请删除（注意，可能会缺少下文中列出的一些程序，这是正常的。这与你破解的方式而异）:
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. 如果系统固件为 3.60 的用户如果有也应删除这些文件:
- + "h-encore"
-1. 关闭“内容管理器”程序
-
___
-你现在可以非常容易的通过 Vita Homebrew Browser 安装任何自制程序。 或者你也可以到 [VitaDB](https://vitadb.rinnegatamante.it/)寻找新的自制程序。
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
*不建议*通过安装高级用户自制程序（例如“Enso EX”）来更改自制固件的安装情况。 在没有完全理解系统运作的情况下这样做会导致*砖机*！
{: .notice--danger}
-如果你想用其他的内存卡来代替原厂的索尼内存卡（比如 MicroSD 卡或者 USB 硬盘），请参见[StorageMgr](storagemgr)。
+如果你想用其他的内存卡来代替原厂的索尼内存卡（比如 MicroSD 卡或者 USB 硬盘），请参见 [YAMT](yamt)。
{: .notice--success}
若你想要在内置的 PSP 模拟器中安装自制固件，请参见[Adrenaline](adrenaline)。
diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt
index b5598586..a64819dd 100644
--- a/_pages/zh_CN/get-started.txt
+++ b/_pages/zh_CN/get-started.txt
@@ -11,7 +11,7 @@ title: "新手入门"
开始前，windows用户需要开启[显示文件后辍](file-extensions-(windows)) 选项！
{: .notice--info}
-从下面的表格中选择与你的版本相符之页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+从下面的表格中选择与你的版本相符之页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
你的设备系统版本可以在设置应用程序的 “系统” 选项的 “系统信息” 项下找到。
@@ -36,23 +36,16 @@ title: "新手入门"
| 1.03 |
- 3.57 |
- 更新至 3.60 |
-
-
- | 3.60 |
- 3.60 |
- 安装 HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
安装 h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt
index 448784fd..bebfa174 100644
--- a/_pages/zh_CN/home.txt
+++ b/_pages/zh_CN/home.txt
@@ -62,8 +62,8 @@ Ensō 可在所有 3.65 或以下版本的设备中运行；而系统版本更
## 在开始之前我需要知道什么？
+ **在开始之前，你要知道破解Vita的风险：每次你修改系统的时候，都有可能会使你的 Vita 不可恢复的变砖。 这种情况很少见，但是仍然存在这样的可能性，所以请确保你完全按照本教程的指导进行操作。**
-+ 此手册适用于所有系统版本所有主机区域在 1.03 到 3.72 的 PS Vita、PS Vita Slim 与 PS TV 的设备。
-+ 如果一切顺利，在安装完自制系统后你不会丢失任何数据（包括游戏、PSN账号、存档等）。
++ 此指南适用于所有系统版本在从 1.03 到 3.73 的 PS Vita、PS Vita Slim 与 PS TV 设备，无论地区版本。
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **确保你的设备在操作过程中接上电源线充电，防止因意外关机而造成数据丢失或机器损坏！**
+ PS Vita 2000 与 PS TV 在软件上与最初的 PS Vita 1000 是非常相似的。 除非有特殊说明，所有标为 “PS Vita” 的步骤在其他机型上也适用。
+ 如果你的设备是 PS Vita 1000，你需要用到一张 Sony 原厂内存卡（任意容量）来继续此教程。 此限制不适用于 PS Vita 2000 或 PS TV，因为这些机型都有内置储存卡。
diff --git a/_pages/zh_CN/installing-enso-(3.60).txt b/_pages/zh_CN/installing-enso-(3.60).txt
index bdfbf52b..145e7b0f 100644
--- a/_pages/zh_CN/installing-enso-(3.60).txt
+++ b/_pages/zh_CN/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ Ensō 是 PS Vita（TV）使用自制固件的一套解决方案，依靠本方
#### 第一步 — 准备工作
-1. 启动molecularShell应用
+1. 启动 molecularShell 或 VitaShell 应用
1. 按下 “Select” 键以启用设备上的 FTP 访问
1. 在电脑上打开 FTP 客户端
1. 输入设备上显示的 IP 地址与端口
@@ -38,7 +38,7 @@ Ensō 是 PS Vita（TV）使用自制固件的一套解决方案，依靠本方
1. 当提示有关“扩展权限(extended permissions)”的时候, 按 “×” 键确认以继续安装
1. 按下 “△” 键打开菜单, 然后选择 “Delete” 以删除选中的文件
1. 按下 “×” 键确认删除
-1. 关闭 molecularShell 应用
+1. 关闭 molecularShell 或 VitaShell 应用
#### 第三步 — 安装 Ensō
@@ -49,5 +49,5 @@ Ensō 是 PS Vita（TV）使用自制固件的一套解决方案，依靠本方
___
-### 继续至 [完成安装](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/zh_CN/installing-enso-(3.65).txt b/_pages/zh_CN/installing-enso-(3.65).txt
index 8f9daeed..7dd756b3 100644
--- a/_pages/zh_CN/installing-enso-(3.65).txt
+++ b/_pages/zh_CN/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ title: "安装 Ensō (3.65)"
___
-### 继续下一步 [完成安装](finalizing-setup)
+### Continue to [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/zh_CN/installing-enso.txt b/_pages/zh_CN/installing-enso.txt
new file mode 100644
index 00000000..b6f2e4b2
--- /dev/null
+++ b/_pages/zh_CN/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="内容目录" %}
+
+### 必读事项
+
+Ensō 是 PS Vita（TV）使用自制固件的一套解决方案，依靠本方案，可在你的主机开机时自动配置HENkaku环境，可以在你的设备上方便地使用自制软件。
+
+它比 HENkaku 更方便，因为它不需要在每次设备重启后手动触发漏洞进入破解模式。
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### 你需要准备点啥？
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### 操作步骤
+
+1. Open the VitaDeploy application
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### 继续至 [完成安装](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_CN/installing-h-encore.txt b/_pages/zh_CN/installing-h-encore.txt
index 005e21ee..0362ba91 100644
--- a/_pages/zh_CN/installing-h-encore.txt
+++ b/_pages/zh_CN/installing-h-encore.txt
@@ -1,18 +1,18 @@
---
-title: Installing h-encore
+title: 安装 h-encore
---
{% include toc title="内容目录" %}
### 必读事项
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+h-encore 漏洞允许你在 PS Vita (TV) 中安装自制程序到你的主菜单中。 它兼容 3.65 至 3.73 的系统版本。
-Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
+请注意，h-encore 并不是 “永生” 的漏洞（也就是说漏洞将于重启后失效）。 也就是说你在每次重启主机后都必须再触发一次漏洞。
-In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
+除了安装 h-encore 漏洞外，我们也将打开 “不安全” 的自制程序使用权来使用需要高权限的自制程序。 它就像电脑上的管理员账户（administrator）。
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+如果你的主机系统版本在 3.65 至 3.68 之间，则你需要使用 h-encore 漏洞破解。如果你的版本在 3.69 至 3.73 以上，则你需要使用 h-encore² 来破解。 我们用来安装漏洞的程序 (finalhe) 应该会帮你执行一些操作。
如果你的设备是 PS Vita 1000，你需要用到一张 Sony 原厂内存卡（任意容量）来继续此教程。 此限制不适用于 PS Vita 2000 或 PS TV，因为这些机型都有内置储存卡。
{: .notice--info}
@@ -20,61 +20,61 @@ If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exp
### 你需要准备点啥？
* 最新版 [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- - If you are using MacOS or Linux you will be required to compile finalhe yourself
+ - 如果你在使用 MacOS 或者 Linux 系统，那你得自行编译一个 finalhe
+* The latest release of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### 操作步骤
#### 第一步 — finalhe
1. 解压 finalhe `.zip` 到你电脑上的任何一个文件夹
+1. Copy the VitaDeploy `.zip` file inside the finalhe folder
+ + 不要解压文件
1. 在你的电脑上启动 finalhe
- + If you are prompted to allow finalhe network access through the firewall, do so
+ + 如果你被提示是否要允许 finalhe 访问网络时，请选择允许
1. 在你的主机中启动“内容管理器”程序
-1. 选择“复制内容(Copy Content)”
-1. 选择 “PC”
+1. Tap "Copy Content"
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + 如果你的设备无法检测到与主机的USB连接，请安装 [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) 然后再试一次
+1. Tap "PC"
1. 选择你想要的方法连接至 finalhe
+ 如果你被要求登录至 PlayStation Network，请登录
+ 如果你没有账号请创建一个
-1. 当提示时，选择／注册你的电脑
+1. Select or register your computer if prompted
+ 如果你遇到消息指示你更新，请重启设备并再试一次
- + 如果你依然遇到了提示，请参见[阻止更新](blocking-updates)并再试一次
- + 如果你*仍然*遇到了这个提示，请前往系统设置打开飞行模式，然后再试（这选项PS TV上是*没有*的，因为谁会在飞机上玩这个啊）
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + If you still encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### 第二步 — h-encore 转移
-1. 选择“Trim h-encore to ~13MB”
- + Only do this step if you are on 3.68 or below
-1. 选择 “Let's GO!”
+1. Select "Trim h-encore to ~7MB"
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ 漏洞所需文件将会自动下载并准备好
+ 此过程会花费一些时间
-1. 在你的设备上选择 “PC -> PS Vita System”
-1. 选择“应用程序(Applications)”
-1. 选择 “PS Vita”
-1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. 选择 “Copy”
-1. 选择 “OK”
- + h-encore 漏洞将会被复制到你的设备中
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
+1. 根据屏幕上的提示选择 “h-encore 或 “h-encore²”
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ 此过程会花费一些时间
1. 关闭“内容管理器”程序
1. 关闭 finalhe
#### 第三步 — 配置h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. 在启动 h-encore 应用程序时按住“R”键
- + 如果提示有关奖杯的信息，请继续按住“R”键并选择“Yes”
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. 如果漏洞成功触发，你现在将看到h-encore引导程序菜单
- + 如果漏洞触发后卡在白屏上，只需关闭应用程序（这会导致系统崩溃并重启设备），然后再试一次
- + 如果仍然卡住，请按住电源按钮超过30秒以强制重启，然后再试一次
-1. 选择 “Install HENkaku”
- + 这将安装HENkaku漏洞并启用自制程序权限，直到下次重新启动
-1. 选择 “下载VitaShell(Download VitaShell)”
- + 这将会安装 VitaShell 自制程序来管理你设备的文件系统
- + VitaShell （以及所有的自制程序）在重启后依然会保持安装的状态，但是如果没有触发 HENkaku 漏洞的话是无法运行的。
-1. 选择 “Exit”
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### 第五步 — 配置 HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. 返回 HENkaku 设置菜单
1. 关闭系统设置
+#### Section V - Installing essential homebrew
+
+1. Launch the VitaDeploy application
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. 按下 “×” 键确认安装
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### Continue to [Installing Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/zh_CN/installing-henkaku.txt b/_pages/zh_CN/installing-henkaku.txt
index ac655179..cc94cc48 100644
--- a/_pages/zh_CN/installing-henkaku.txt
+++ b/_pages/zh_CN/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku 是一系列专门用于 PS Vita (TV) 的漏洞；此漏洞允许你安
请注意，HENkaku 并不是持久性的漏洞（也就是说漏洞将于重启后失效）。 不过，这之后将安装HENkaku Ensō来解决这个问题。
-除了运行 HENkaku 漏洞外，我们也将开启 “不安全” 的自制程序使用权来安装更高权限的自制程序。 这类似电脑上的“administrator”用户。
+除了运行 HENkaku 漏洞外，我们也将开启 “不安全” 的自制程序使用权来安装更高权限的自制程序。 This idea could be considered analogous to the "administrator" mode on a computer.
如果你的设备是 PS Vita 1000，你需要用到一张 Sony 原厂内存卡（任意容量）来继续此教程。 此限制不适用于 PS Vita 2000 或 PS TV，因为这些机型都有内置储存卡。
{: .notice--info}
@@ -29,7 +29,10 @@ HENkaku 是一系列专门用于 PS Vita (TV) 的漏洞；此漏洞允许你安
1. 阅读免责声明，然后点击“Install”
如果漏洞执行成功，你的LiveArea页面中将会出现一个叫做“molecularShell”的应用程序。
1. 如果漏洞执行成功，你的LiveArea页面中将会出现一个叫作“molecularShell”的应用程序
- + 如果漏洞成功触发了但是却没看到molecularShell程序，请再执行一次漏洞并在提示重新安装molecularShell时按下“R1”
+ + 如果漏洞成功触发了但是却没看到 molecularShell 程序，请再执行一次漏洞并在提示重新安装 molecularShell 时按下 “R1” 键。
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### 第二步 — 配置 HENkaku
diff --git a/_pages/zh_CN/installing-vitadeploy.txt b/_pages/zh_CN/installing-vitadeploy.txt
new file mode 100644
index 00000000..8e3d65df
--- /dev/null
+++ b/_pages/zh_CN/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="内容目录" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+为了在你的设备安装必要的 `.vpk` 安装包，我们使用 [FTP](https://zh.m.wikipedia.org/wiki/%E6%96%87%E4%BB%B6%E4%BC%A0%E8%BE%93%E5%8D%8F%E8%AE%AE) 来将文件复制到你设备的内存卡。
+
+### 你需要准备点啥？
+
+* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ + 或者，你也可以使用 VitaShell 的 USB 传输功能
+* The latest version of [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + Download the `VitaDeploy.vpk` file
+
+#### 第一步 — 准备工作
+
+1. 启动 VitaShell 应用
+1. 按下 “Start” 键来打开 VitaShell 的设置
+1. 在 “SELECT button” 上按下×键来切换模式为“FTP”
+ + 或者你也可以切换成USB模式并通过其传输方式来传输所需文件
+1. 按下 “○” 关闭 VitaShell settings
+1. 按下 “Select” 键以启用设备上的 FTP 访问
+1. 在电脑上打开 FTP 客户端
+1. 输入设备上显示的 IP 地址与端口
+1. 使用客户端移动至 `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. 在你的主机上按下 “○” 键以关闭 FTP 连接
+
+#### Section II - Installing the application
+
+1. 启动 VitaShell 应用
+1. Navigate to `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. 按下 “×” 键确认安装
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/zh_CN/privacy-policy.txt b/_pages/zh_CN/privacy-policy.txt
index 18695e93..b11473c6 100644
--- a/_pages/zh_CN/privacy-policy.txt
+++ b/_pages/zh_CN/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-本站点使用 cookies 来方便手册指导用户。 Cookies 允许通过站点的侧边栏显示当前的进度，帮助用户更容易找到指示。
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies 允许通过站点的侧边栏显示当前的进度，帮助用户更容易找到指示。
### 从其他网站嵌入内容
@@ -31,4 +31,4 @@ Google (作为第三方广告供应商) 使用 cookies 来运维此网站的广
### 对隐私政策的更改
-隐私政策的内容可以在任何时候并以任何理由加以修改。 关于这个网站隐私政策的问题，请联系[plailect@gmail.com](mailto:plailect@gmail.com)。
+隐私政策的内容可以在任何时候并以任何理由加以修改。 关于这个网站隐私政策的问题，请使用英文联系[plailect@gmail.com](mailto:plailect@gmail.com)。
diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt
index c0a4f14e..4cc82fb4 100644
--- a/_pages/zh_CN/site-navigation.txt
+++ b/_pages/zh_CN/site-navigation.txt
@@ -16,22 +16,25 @@ sitemap: false
+ [降级系统 (3.65)](downgrading-firmware-(3.65))
+ [常见问题](faq)
+ [文件后缀名 (Windows)](file-extensions-(windows))
++ [Finalizing Setup (Legacy)](finalizing-setup-(legacy))
+ [完成安装](finalizing-setup)
+ [新手入门](get-started)
+ [首页](/zh_CN/)
-+ [安装 Ensō (3.60)](installing-enso-(3.60))
-+ [安装 Ensō (3.65)](installing-enso-(3.65))
++ [安装 Ensō（3.60）](installing-enso-(3.60))
++ [安装 Ensō（3.65）](installing-enso-(3.65))
++ [Installing Ensō](installing-enso)
+ [安装 h-encore](installing-h-encore)
+ [安装 HENkaku](installing-henkaku)
+ [隐私政策](privacy-policy)
+ [格式化存储空间 (Linux)](storage-format-(linux))
+ [格式化存储空间 (Mac)](storage-format-(mac))
+ [格式化存储空间 (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [问题排查](troubleshooting)
-+ [升级系统 (3.60)](updating-firmware-(3.60))
-+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
-+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
++ [升级系统（3.60）](updating-firmware-(3.60))
++ [Updating Firmware (3.73)](updating-firmware-(3.73))
++ [升级系统（PS TV 3.65）](updating-firmware-(ps-tv-3.65))
++ [升级系统（PS Vita 3.65）](updating-firmware-(ps-vita-3.65))
+ [为什么有广告？](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/zh_CN/storage-format-(mac).txt b/_pages/zh_CN/storage-format-(mac).txt
index 01915bad..0566f47f 100644
--- a/_pages/zh_CN/storage-format-(mac).txt
+++ b/_pages/zh_CN/storage-format-(mac).txt
@@ -1,5 +1,5 @@
---
-title: "Storage Format (Mac)"
+title: "格式化存储空间（Mac）"
---
{% include toc title="内容目录" %}
@@ -22,11 +22,13 @@ title: "Storage Format (Mac)"
#### 第一步 — 格式化存储设备
1. 将存储设备插入电脑
-1. 启动磁盘工具
-1. 选择你的存储设备
-1. 选择“分区”菜单
-1. 将存储设备分区为MBR的exFAT格式
- + 如果你的存储设备容量为256GB或更大，你必须将格式化时设置的分配单元大小设置为 64 KB
+1. 打开终端程序。
+1. 在终端中输入 `diskutil list`
+1. 你的存储设备将会被识别并加载到 `/dev/diskX` 文件夹中。
+1. 输入 `diskutil unmount /dev/diskX` 然后输入 `sudo dd if=/dev/zero of=/dev/diskX` 来格式化存储设备。
+1. 拔出并重新插入你的存储设备
+1. 输入 `sudo newfs_exfat -R /dev/diskX` 来将你的存储设备格式化为 exfat
+ + 如果你的存储设备容量在 256 GB 或以上，则你必须要输入 `sudo newfs_exfat -R -c 64 /dev/diskX`
#### 第二步 — 验证存储设备
diff --git a/_pages/zh_CN/storage-format-(windows).txt b/_pages/zh_CN/storage-format-(windows).txt
index 5e2f09ce..69c26419 100644
--- a/_pages/zh_CN/storage-format-(windows).txt
+++ b/_pages/zh_CN/storage-format-(windows).txt
@@ -64,4 +64,4 @@ title: "格式化存储空间 (Windows)"
___
### 返回至 [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+{: .notice--primary}
diff --git a/_pages/zh_CN/storagemgr.txt b/_pages/zh_CN/storagemgr.txt
index 2a3c114c..fe125d79 100644
--- a/_pages/zh_CN/storagemgr.txt
+++ b/_pages/zh_CN/storagemgr.txt
@@ -6,11 +6,11 @@ title: "StorageMgr"
### 必读事项
-StorageMgr是PS Vita（TV）的多用途内核插件，允许设备使用其他存储设备，如USB驱动器，SD2Vita或psvd。
+StorageMgr is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of alternative storage devices such as a USB drive, an SD2Vita, or a psvsd adapter.
-SD2Vita是一个microSD转换为游戏卡的适配器，请将它插入你设备的游戏卡插槽，而psvd是microSD的适配器，它会取代3g PS Vita型号上的3g调制解调器。
+The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device, while the psvsd is a microSD adapter which replaces the 3g modem on 3g PS Vita models.
-通过使用StorageMgr内核插件，你使用的USB驱动器或microSD卡将被挂载到`ux0:`，就像索尼专用的内存卡一样。 这非常有用，因为microSD卡比索尼内存卡便宜得多（特别是在高容量时）。
+By using the StorageMgr kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. 这非常有用，因为microSD卡比索尼内存卡便宜得多（特别是在高容量时）。
本教程将使用FTP传输文件，因此你的Vita和PC必须在同一网络。
@@ -19,50 +19,51 @@ SD2Vita是一个microSD转换为游戏卡的适配器，请将它插入你设备
### 你需要准备点啥？
-* 与你的设备格式兼容的存储设备
- + 若要格式化你的存储设备，请见[格式化存储设备(Windows)](storage-format-(windows))，[格式化存储设备(Linux)](storage-format-(linux))，或 [格式化存储设备(Mac)](storage-format-(mac))
+* A formatted storage device compatible with your system
+ + To format your device, see [Storage Format (Windows)](storage-format-(windows)), [Storage Format (Linux)](storage-format-(linux)), or [Storage Format (Mac)](storage-format-(mac))
* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ 或者，你也可以使用 VitaShell 的 USB 传输功能
-* 最新版 [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
- + 请依你的情形修改 `storage_config.txt`，请参考[README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
- + `MCD=uma0` 除非你不想使用原厂的索尼内存卡，应该保持不变
- + `INT=imc0` 对于PS Vita 2000和PS TV用户来说这应保持原样，但是PS Vita 1000用户应将其删除
- + `GCD=ux0` SD2Vita 用户无需更改，而 psvd 或随身硬盘的用户需要更改成 `UMA=ux0`
- + `UMA=grw0` 除非你有多个储存载体请删除此项 (如果是这样，未配置至 `ux0:` 分区的设备应该会被分到 `grw0:` 分区)
+* The latest release of [StorageMgr](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/releases)
+ + `storage_config.txt` should be edited to fit your situation as instructed in the [README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ + `MCD=uma0` should be kept as-is if you plan to keep a Sony memory card in your device, and removed otherwise
+ + `INT=imc0` should be kept as-is for PS Vita 2000 and PS TV users, and removed for PS Vita 1000 users
+ + `GCD=ux0` should be kept as-is for SD2Vita users, and edited to `UMA=ux0` for USB drive and psvsd users
+ + `UMA=grw0` should be removed unless you have multiple storage devices (in which case the device which is not assigned to `ux0:` should be assigned to `grw0:`)
### 操作步骤
-#### 第一步 — 安装插件
+#### Section I - Installing Plugins
1. 启动 VitaShell 应用
1. 按下 “Select” 键以启用设备上的 FTP 访问
1. 在电脑上打开 FTP 客户端
1. 输入设备上显示的 IP 地址与端口
-1. 通过FTP客户端，从`ux0:tai/` 复制所有文件到 `ur0:tai/`
+1. Using your FTP client, copy all files from `ux0:tai/` to `ur0:tai/`
+ 覆盖所有在 `ur0:tai/` 文件夹中的文件
+ 如果你没有 `ux0:tai/` 文件夹，请忽略此步骤
1. 复制 `storagemgr.skprx` 到 `ur0:tai/` 文件夹
1. 复制 `storage_config.txt` 到 `ur0:tai/` 文件夹
-1. 将 `ur0:tai/config.txt` 中所有的 `ux0:tai/` 替换为 `ur0:tai/`
+1. 将 `ur0:tai/config.txt` 中所有的 `ux0:tai/` 替换为 `ur0:tai/`
+ 如果你没有 `ux0:tai/` 文件夹，请忽略此步骤
1. 将下列的字符串加入 `ur0:tai/config.txt` 中的 `*KERNEL` 行列下：
+ `ur0:tai/storagemgr.skprx`
-1. 删除`ux0:tai/`文件夹
-
-#### 第二部分 — 恢复资料
+1. 删除 `ux0:tai/` 文件夹
+ + 这是一个重要的步骤，因为 HENkaku 在检测到 `ux0:tai` 存在的时候将不会加载 `ur0:tai` 中的插件。
+
+#### 第二部分 — 恢复数据
此步将复制你旧的索尼内存卡中的数据到你的新存储设备中。
{: .notice--info}
1. 将 `ux0:` 里的所有文件备份到你电脑上的一个文件夹
- + 这与你在索尼内存卡里面存了多少文件而定，这可能需要耗费一些时间
+ + 这与你在索尼内存卡里面存了多少文件而定，可能需要耗费一些时间
1. 将新的存储设备插入电脑
-1. 将你刚刚复制的文件粘贴到新的存储设备中
- + 这与你在索尼内存卡里面存了多少文件而定，这可能需要耗费一些时间
- + 请勿将整个文件夹复制进新的存储设备，请复制所有的文件到存储设备
+1. 将你刚刚复制的 `ux0:` 文件夹内的文件粘贴到新的存储设备中
+ + 这与你在索尼内存卡里面存了多少文件而定，可能需要耗费一些时间
+ + 请勿将整个 `ux0:` 文件夹直接复制进新的存储设备，请复制它里面所有的文件到存储设备
1. 插入你想用的新存储设备到你的 PS Vita (TV)
1. 在你的主机上按下 “○” 键以关闭 FTP 连接
-1. 关闭 VitaShell 应用
+1. 退出 VitaShell 应用
1. 重启你的设备
+ 如果你的设备没有安装 Ensō ，则你将需要手动启动并退出 h-encore 来开启 homebrew。
+ 这是加载之前写入 `ur0:tai/config.txt` 的内核插件的必要步骤
@@ -70,15 +71,18 @@ SD2Vita是一个microSD转换为游戏卡的适配器，请将它插入你设备
___
{% capture notice-1 %}
-如果你想要清理你内存卡中的内容 (如果想存 PSP 游戏之类的到卡里)，你可 `uma0:` (新的内存卡挂载位置) 以及/或者 `imc0:` (适用于 PS Vita 2000 或 PS TV) 中的资料删除。
+如果你想要清理你内存卡中的内容（如想存 PSP 游戏之类的到卡里），你可 `uma0:`（新的内存卡挂载位置）以及/或者 `imc0:` （适用于 PS Vita 2000 或 PS TV）中的文件删除。
-如果你想要清理，而你正使用着 h-encore 且主机系统版本为 3.67 或 3.68，则你*绝对不能*删除下面的文件夹:
+如果你决定这样做，那你*绝对不要*删除以下文件夹：
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
这是因为 h-encore 得保证内存卡中的文件归位正常，这样你才能在重启之后启用 HENkaku (还有 StorageMgr)。
{% endcapture %}
diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt
index db1ed547..7eb54b09 100644
--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@@ -18,6 +18,7 @@ title: "问题排查"
1. 打开浏览器，进入浏览器设置页面
1. 滚动至底端，点击“删除 Cookies” 与 “清除搜索历史”
1. 再次尝试触发漏洞
+ + 如果依然无效，请重启主机，然后等五分钟再打开浏览器
## 在不格式化主机的情况下清除 PSN 账号
@@ -30,4 +31,5 @@ title: "问题排查"
1. 按住 L 键开机，取消 TaiHEN 插件的加载
1. 如果你的设备成功启动了，请尝试编辑 `ux0:tai/config.txt` 并删除你最近安装的插件
-1. 如果以上步骤无法解决你的问题，那你的设备可能已经变砖了
\ No newline at end of file
+1. 如果以上步骤无法解决你的问题，那你的设备可能已经变砖了
+ + 如果发生这个情况，请参考[这个教程](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/zh_CN/updating-firmware-(3.60).txt b/_pages/zh_CN/updating-firmware-(3.60).txt
index 6e5174bc..7fb6b8f1 100644
--- a/_pages/zh_CN/updating-firmware-(3.60).txt
+++ b/_pages/zh_CN/updating-firmware-(3.60).txt
@@ -19,21 +19,21 @@ HENkaku 漏洞只与系统版本3.60兼容。 因此，较低的系统版本必
#### 第一步 — 准备工作
1. 打开系统设置
-1. 依次进入 `网络(Network)` -> `Wi-Fi 设定(Wi-Fi Settings)`
+1. 依次进入 `网络（Network）` -> `Wi-Fi 设定（Wi-Fi Settings）`
+ 如果你之前没有联网，那么现在请连接到 Wi-Fi 网络
1. 选择你想使用的接入点
+ 已连接的网络旁边会有绿色的点
-1. 选择 “高级设置(Advanced Settings)”
-1. 找到 “DNS 设置(DNS Settings)” 并将它设置为“手动(Manual)”
-1. 将 “主DNS(Primary DNS)” 设置为 `212.47.229.76`
-1. 将“备用 DNS(Secondary DNS)” 留空
-1. 确认“代理服务器 (Proxy)” 设置为 “不使用(Do Not Use)”
+1. 选择 “高级设置（Advanced Settings）”
+1. 找到 “DNS 设置（DNS Settings）” 并将它设置为“手动（Manual）”
+1. 将 “主DNS（Primary DNS）” 设置为 `212.47.229.76`
+1. 将“备用 DNS（Secondary DNS）” 留空
+1. 确认“代理服务器（Proxy）” 设置为 “不使用（Do Not Use）”
1. 返回到设置的主菜单
#### 第二步 — 更新系统到 3.60
-1. 移动至 `系统更新(System Update)` -> `使用WI-FI更新(Update Using Wi-Fi)`
-1. 确认更新信息为 "3.60 (変革 Compatible)"
+1. 移动至 `系统更新（System Update）` -> `使用WI-FI更新（Update Using Wi-Fi）`
+1. 确认更新信息为 "3.60（変革 Compatible）"
+ 如果显示的是其他信息，请立即停下来然后检查你之前漏了什么步骤
1. 按照提示步骤更新你的设备到 3.60
+ 当完成时，你的设备会自动重启
diff --git a/_pages/zh_CN/updating-firmware-(3.73).txt b/_pages/zh_CN/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..9190e0fb
--- /dev/null
+++ b/_pages/zh_CN/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="内容目录" %}
+
+### 必读事项
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### 你需要准备点啥？
+
+* 将你的 PS Vita (TV) 连接上网络
+
+### 操作步骤
+
+1. 移动至 `系统更新（System Update）` -> `使用WI-FI更新（Update Using Wi-Fi）`
+1. Follow the prompts to update your device to 3.73
+ + 当完成时，你的设备会自动重启
+
+___
+
+### 继续至 [安装 h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/zh_CN/updating-firmware-(ps-tv-3.65).txt b/_pages/zh_CN/updating-firmware-(ps-tv-3.65).txt
index d3d9baa5..c34fbffa 100644
--- a/_pages/zh_CN/updating-firmware-(ps-tv-3.65).txt
+++ b/_pages/zh_CN/updating-firmware-(ps-tv-3.65).txt
@@ -1,5 +1,5 @@
---
-title: "Updating Firmware (PS TV 3.65)"
+title: "更新固件（PS TV 3.65）"
redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
---
@@ -7,11 +7,11 @@ redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
### 必读事项
-The h-encore exploit is only compatible with firmware versions 3.65 and above. 因此，其他的系统版本必须使用自定义更新程序进行更新，才能使用此漏洞。
+h-encore 漏洞只与 3.65 及以上的系统版本兼容。 因此，其他的系统版本必须使用自定义更新程序进行更新，才能使用此漏洞。
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+虽然 h-encore 漏洞自身与较高固件版本兼容，但是在 3.65 下的固件版本的用户只能更新固件版本 3.65，因为它是仍然支持 Ensō 开机漏洞的版本。
-请注意，自定义更新软件只能更新你的设备，而不能降级。 If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+请注意，自定义更新软件只能更新你的设备，而不能降级。 如果你的设备固件版本已经高于 3.65 了，你应该回到[新手入门](get-started)。
### 你需要准备点啥？
diff --git a/_pages/zh_CN/updating-firmware-(ps-vita-3.65).txt b/_pages/zh_CN/updating-firmware-(ps-vita-3.65).txt
index dcc1af14..7af108a6 100644
--- a/_pages/zh_CN/updating-firmware-(ps-vita-3.65).txt
+++ b/_pages/zh_CN/updating-firmware-(ps-vita-3.65).txt
@@ -1,17 +1,17 @@
---
-title: "Updating Firmware (PS Vita 3.65)"
-redirect_from: /updating-firmware-(ps-vita-3.65-and-3.68)
+title: "更新固件（PS Vita 3.65）"
+redirect_from: /updating-firmware-(ps-tv-3.65-and-3.68)
---
{% include toc title="内容目录" %}
### 必读事项
-The h-encore exploit is only compatible with firmware versions 3.65 and above. 因此，其他的系统版本必须使用自定义更新程序进行更新，才能使用此漏洞。
+h-encore 漏洞只与 3.65 及以上的系统版本兼容。 因此，其他的系统版本必须使用自定义更新程序进行更新，才能使用此漏洞。
-While the h-encore exploit itself is compatible with higher firmware versions, users on a firmware version under 3.65 should only update to firmware version 3.65 as it is the latest version which still supports the Ensō boot-time exploit.
+虽然 h-encore 漏洞自身与较高固件版本兼容，但是在 3.65 下的固件版本的用户只能更新固件版本 3.65，因为它是仍然支持 Ensō 开机漏洞的版本。
-请注意，自定义更新软件只能更新你的设备，而不能降级。 If you are on a firmware version higher than 3.65, you should return to [Get Started](get-started).
+请注意，自定义更新软件只能更新你的设备，而不能降级。 如果你的设备固件版本已经高于 3.65 了，你应该回到[新手入门](get-started)。
### 你需要准备点啥？
@@ -43,13 +43,13 @@ While the h-encore exploit itself is compatible with higher firmware versions, u
#### 第二步 — 升级自制固件
1. 打开系统设置
-1. 移动至 `系统更新(System Update)` -> `连接PC更新(Update by Connecting to a PC)`
-1. Ensure the update message "Version 3.65" is displayed, depending on which version you are attempting to update to
+1. 移动至 `系统更新（System Update）` -> `连接PC更新（Update by Connecting to a PC）`
+1. 依照你所选择的版本，请确保所示更新为“版本 3.65”
+ 如果显示的是其他信息，请立即停下来然后检查你之前漏了什么步骤
1. 按照提示步骤更新你的设备
+ 当完成时，你的设备会自动重启
___
-### 继续至 [安装 h-encore](installing-h-encore)
+### 继续至[安装 h-encore](installing-h-encore)
{: .notice--primary}
diff --git a/_pages/zh_CN/why-ads.txt b/_pages/zh_CN/why-ads.txt
index 302a96d5..190a1555 100644
--- a/_pages/zh_CN/why-ads.txt
+++ b/_pages/zh_CN/why-ads.txt
@@ -11,5 +11,5 @@ layout: single-no-ads
如果你屏蔽了这些广告，你也可以访问我的[捐赠](donations)页面。当然了，捐款也是自愿的。
-谢啦，
+谢谢，
Plailect & emyl
diff --git a/_pages/zh_CN/yamt.txt b/_pages/zh_CN/yamt.txt
new file mode 100644
index 00000000..ecb16363
--- /dev/null
+++ b/_pages/zh_CN/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "为 SD2Vita 安装 YAMT 插件的手册。"
+---
+
+{% include toc title="内容目录" %}
+
+### 必读事项
+
+YAMT（Yet Another Mount Tool）是一个为 PS Vita（TV）而制作的多用途内核工具，允许使用 SD2Vita 将 micro SD 卡作为存储设备。 SD2Vita 是一个插在你主机的游戏卡槽中，用于 microSD 转游戏卡的适配器。
+
+通过使用 YAMT 内核插件，你使用的 USB 驱动器或 microSD 卡将像索尼专用的内存卡一样被挂载到 `ux0:`。 这非常有用，因为microSD卡比索尼内存卡便宜得多（特别是在高容量时）。
+
+本教程将使用FTP传输文件，因此你的Vita和PC必须在同一网络。
+
+如果你正在使用 USB 驱动器或者 psvsd 适配器，亦或者此方法不适用于你，请跟随 [StorageMgr](storagemgr) 教程做。
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT 仅兼容固件版本在 3.60 和 3.65 的 HENkaku Ensō。
+{: .notice--info}
+
+### 你需要准备点啥？
+
+* 与你的设备兼容的存储设备
+ + 这可以是 SD2Vita 或 psvsd 适配器中使用的 microSD 卡，也可以是 PS TV 主机的 USB 设备
+* 一个 FTP 连接软件，比如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ + 或者，你也可以使用 VitaShell 的 USB 传输功能
+* 最新版 [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* 最新版 [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### 操作步骤
+
+#### 第一步 — 准备工作
+
+1. 启动 VitaShell 应用
+1. 按下 “Select” 键以启用设备上的 FTP 访问
+1. 在电脑上打开 FTP 客户端
+1. 输入设备上显示的 IP 地址与端口
+1. 使用客户端移动至 `ux0:` -> `data/`
+1. 复制 `yamt.vpk` 到 `data` 文件夹
+1. 复制 `storageFormat.vpk` 到 `data` 文件夹
+1. 在你的主机上按下 “○” 键以关闭 FTP 连接
+
+#### 第二步 － 安装 .vpk 文件
+
+1. 在你的设备上移动至 `ux0:` -> `data/`
+1. 对每个 “. vpk” 文件按下 “□” 键进行选中
+1. 按下 “△” 键打开菜单, 然后选择 “More” -> “Install all” 以安装选中的文件
+1. 按下 “×” 键确认安装
+1. 当提示有关“扩展权限(extended permissions)”的时候, 按 “×” 键确认以继续安装
+1. 按下 “△” 键打开菜单, 然后选择 “Delete” 以删除选中的文件
+1. 按下 “×” 键确认删除
+1. 退出 VitaShell 应用
+
+#### 第三步 – 格式化 microSD 卡
+
+1. 把你的 SD2Vita 插上 microSD 卡，然后将其插到你的 PS Vita 或 PS TV 主机中。
+1. 启动 storageFormat 应用
+1. 确认 `Target` 被设置为 “SD2Vita” 且 `Filesystem` 被设置为 “TexFAT”
+1. 在 “Format target storage” 上按下 (×) 键
+ + 如果失败了，请确保适配器正确插入且其未损坏，然后重启并重试
+ + 如果仍然不行，请照 [StorageMgr](storagemgr) 教程做
+1. 在 “Reboot your device” 上按下 (×) 键
+
+#### Section IV - Installing yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. 设置 `uma0:` 为 “SD2Vita”
+1. 长按电源键然后选择 “Power Off”
+
+#### 第五部分 — 恢复数据
+
+此步将复制你旧的索尼内存卡中的数据到你的新存储设备中。
+{: .notice--info}
+
+1. 将你的主机重启
+1. 启动 VitaShell 应用
+1. 进入到 `ux0:` 分区
+ + 这是当前你官方内存卡或内部存储的位置
+1. 按下十字键中的“下”键以突出显示文件夹或文件
+1. 按下 (△) 键打开菜单
+1. 在“Mark all” 上按下 (×) 键来选择在 `ux0:` 分区中的文件夹及文件。
+1. 再次按下 (△) 键打开菜单
+1. 在 “Copy” 上按下 (×) 键
+1. 当提示时再次按下 (×) 键
+1. 退出 `ux0:` 分区并进入 `uma0:` 分区
+ + 这是你的非官方存储设备的内存
+1. 按下 (△) 键打开菜单
+1. 按下 (×) 键粘贴并等待完成
+1. 完成后，退出 VitaShell 并打开设置程序
+1. 进入到 `Devices` -> `Storage Devices`
+1. 设置 `ux0:` 为 “SD2Vita”
+1. 设置 `uma0:` 为 “Memory Card”
+ + 如果你没有使用存储卡，请选择 “Internal Storage”
+1. 长按电源键然后选择 “Power Off”
+1. 将你的主机重启
+
+___
+
+{% capture notice-1 %}
+如果你想要清理你内存卡中的内容（如想存 PSP 游戏之类的到卡里），你可 `uma0:`（新的内存卡挂载位置）以及/或者 `imc0:` （适用于 PS Vita 2000 或 PS TV）中的文件删除。
+
+如果你决定这样做，那你*绝对不要*删除以下文件夹：
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+这是因为 h-encore 得保证内存卡中的文件归位正常，这样你才能在重启之后启用 HENkaku (还有 StorageMgr)。
+{% endcapture %}
+
+{{ notice-1 | markdownify }}
diff --git a/_pages/zh_TW/adrenaline.txt b/_pages/zh_TW/adrenaline.txt
index 625ccd4e..7cf4e82a 100644
--- a/_pages/zh_TW/adrenaline.txt
+++ b/_pages/zh_TW/adrenaline.txt
@@ -47,7 +47,7 @@ Adrenaline 是一個用於修改 PS Vita (TV) 中內建的 PSP 模擬器並透
1. 按下「O」鍵回到 `ux0:` 中
1. 移動至 `tai/`
- + 如果 `urx:tai` 不存在，請按下「O」鍵並移動至 `ur0:tai`
+ + 如果 `ur0:tai` 不存在，請按下「O」鍵並移動至 `ur0:tai`
1. 於 `config.txt` 上按下「X」鍵將其於文件編輯器中開啟
1. 透過游標選取含有 `*KERNEL` 字串的行列
1. 按下「△」(三角形) 鍵開啟選單，並選擇『Insert empty line』(插入空行)
diff --git a/_pages/zh_TW/blocking-updates.txt b/_pages/zh_TW/blocking-updates.txt
index db81042d..b0b1c665 100644
--- a/_pages/zh_TW/blocking-updates.txt
+++ b/_pages/zh_TW/blocking-updates.txt
@@ -6,32 +6,16 @@ title: "阻擋更新"
### 必讀事項
-The latest PS Vita exploit is not compatible with version 3.71. 因此，我們必須等待新版的漏洞釋出且於同時阻止 Vita 更新至任何更新版本的系統韌體。 更新可能將阻止您使用任何未來所研發的漏洞。
-
-我們將更改您主機的 DNS 設定並將更新伺服器設定為一個第三方的伺服器，如此一來，在您的主機眼中 3.60 即會是最新版的系統韌體。 透過這點，我們能阻擋任何比 3.60 還新的系統韌體。
-
+To prevent unwanted updates, we will disable an option made by Sony which automatically download the update file from their servers on your vita.
### 必備項目
* 在您的 PS Vita (TV) 可用的網路連線
### 操作說明
-#### 第一節 — DNS 設置
+#### 第一節－關閉自動下載選項
-請注意，您需要在每個網路設定中設定這些 DNS 伺服器以阻止更新！
-{: .notice--warning}
-1. 啟動設定
-1. 移動至 `網路` -> `Wi-Fi 設定`
- + 若您尚未連上網，請連接到 Wi-Fi 網路
-1. 選擇您目前所連結的網路
- + 已連上的網路旁邊會有一個綠色點點
-1. 選擇『詳細設定』
-1. 將『DNS 設定』改為『手動』
-1. 將『主要 DNS (Primary DNS)』改為 `212.47.229.76`
-1. 將『次要 DNS』留空
-1. 確保您已將『Proxy 伺服器』設定至『不使用』
-1. 回到主選單
1. 移動至 `系統` -> `自動啟動設定`
1. 取消『下載系統軟件的更新檔案』
1. 回到主選單
diff --git a/_pages/zh_TW/credits.txt b/_pages/zh_TW/credits.txt
index 3e37db61..81e5b7e5 100644
--- a/_pages/zh_TW/credits.txt
+++ b/_pages/zh_TW/credits.txt
@@ -9,14 +9,17 @@ title: "製作群"
{% capture notice-1 %}
+ + CelesteBlue
+ codestation
+ Davee
+ mmozeiko
+ + motoharu
+ Proxima
+ TheFloW
+ xyz
+ YifanLu
+ + SKGleba
{% endcapture %}
-{{ notice-1 | markdownify }}
\ No newline at end of file
+{{ notice-1 | markdownify }}
diff --git a/_pages/zh_TW/donations.txt b/_pages/zh_TW/donations.txt
index f890442f..e906beeb 100644
--- a/_pages/zh_TW/donations.txt
+++ b/_pages/zh_TW/donations.txt
@@ -3,25 +3,8 @@ title: "贊助" #
layout: single-no-ads
---
-### Plailect
-
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/plailectguides/15){: .align-center}
-plailect@gmail.com
-{: .text-center}
-{: .notice--info}
-
-[![Bitcoin]({{ "/images/bitcoin_white.png" | absolute_url }}){:height="73px" width="256px"}{: style="padding-bottom: .35em"}](bitcoin:3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp){: .align-center}
-3MtzjaRNrcG57RbNxJegcs8UdtaEfmSZLp
-{: .text-center}
-{: .notice--info}
-
-[![Ethereum]({{ "/images/ethereum_white.png" | absolute_url }}){:height="64px" width="256px"}{: style="padding-bottom: .35em"}](https://www.ethereum.org/){: .align-center}
-0x608C5554D2C53698aA7DFFc7e64BF37f7bebb475
-{: .text-center}
-{: .notice--info}
-
### emiyl
-[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://www.paypal.me/emiyl/15){: .align-center}
+[![PayPal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://emiyl.com/paypal){: .align-center}
{: .text-center}
-{: .notice--info}
\ No newline at end of file
+{: .notice--info}
diff --git a/_pages/zh_TW/downgrading-firmware-(3.60).txt b/_pages/zh_TW/downgrading-firmware-(3.60).txt
index b47367b0..df3f4d30 100644
--- a/_pages/zh_TW/downgrading-firmware-(3.60).txt
+++ b/_pages/zh_TW/downgrading-firmware-(3.60).txt
@@ -1,5 +1,5 @@
---
-title: 降級韌體 (3.60)
+title: 降級韌體 (版本 3.60)
---
### 必讀事項
diff --git a/_pages/zh_TW/downgrading-firmware-(3.65).txt b/_pages/zh_TW/downgrading-firmware-(3.65).txt
index e23d942b..cdf0263e 100644
--- a/_pages/zh_TW/downgrading-firmware-(3.65).txt
+++ b/_pages/zh_TW/downgrading-firmware-(3.65).txt
@@ -1,5 +1,5 @@
---
-title: 降級韌體 (3.65)
+title: 降級韌體 (版本 3.65)
---
### 必讀事項
diff --git a/_pages/zh_TW/faq.txt b/_pages/zh_TW/faq.txt
index da25fc3d..bbff5eef 100644
--- a/_pages/zh_TW/faq.txt
+++ b/_pages/zh_TW/faq.txt
@@ -3,22 +3,22 @@ title: "常見問題 FAQ"
---
**Q:** *我目前裝的是最新版的系統，這樣還可以改機嗎？*
-**A:** Yes, 3.72 is hackable at the moment.
+**A:** 是的，3.73 目前是可以破解的。
**Q:** *我能降級我的 Vita 系統嗎？*
-**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** 是的，Modoru 可以將任何被 HENkaku 或 H-Encore 破解的系統降級到主機出廠時或更新的韌體版本。
**Q:** *在自製韌體環境中安裝官方更新是否安全？*
-**A:** 不！ 您必須確保您在[完成安裝](finalizing-setup)最後步驟中設置好防範未來的更新的措施。
+**A:** 除非有特殊狀況，否則正常情況下不需要在搭載自製韌體的 PSVita 上進行更新。 請留在 3.60 或 3.65 版本。
**Q:** *改機風險多高？*
-**A:** 除非您忽略本教學所有的警示，*基本上*變磚是不可能的。
+**A:** Bricks are *basically* impossible unless you ignore instructions and Sony doesn't ban consoles nor accounts unless you hack trophies or in-game.
**Q:** *我可以透過本教學跑超讚的自製程式跟模擬器嗎？*
**A:** 可以的！ 透過本教學您將可以在您的主機中運行任何社群所製的自製軟體。
**Q:** *如果我遇到問題該怎麼辦？*
-**A:** 若需支援，請見 [Discord 上的 Vita Hacking](https://discord.gg/JXEKeg6) 伺服器。
+**A:** 若需支援，請見 [Discord 上的 Henkaku](https://discord.gg/m7MwpKA) 官方伺服器。
**Q:** *沒電腦也可以完成本教學嗎？*
-**A:** No, you must have a PC to complete this guide.
+**A:** 如果您的韌體版本為 3.61 或更新的版本，那麼改機則必須要有一台可用的電腦。
diff --git a/_pages/zh_TW/file-extensions-(windows).txt b/_pages/zh_TW/file-extensions-(windows).txt
index 809937bc..359c48fe 100644
--- a/_pages/zh_TW/file-extensions-(windows).txt
+++ b/_pages/zh_TW/file-extensions-(windows).txt
@@ -13,7 +13,7 @@ title: "檔案副檔名 (Windows)"
#### Windows 10 / 8.1 / 8
1. 於任何資料夾中開啟『檔案總管』
-1. 點選上方的『檢視』按鈕
+1. 點選上方的『檢視』按鈕
1. 將『副檔名』格子打勾
![]({{ "/images/screenshots/windows-10-file-extensions.png" | absolute_url }})
diff --git a/_pages/zh_TW/finalizing-setup-(legacy).txt b/_pages/zh_TW/finalizing-setup-(legacy).txt
new file mode 100644
index 00000000..f3a1110b
--- /dev/null
+++ b/_pages/zh_TW/finalizing-setup-(legacy).txt
@@ -0,0 +1,115 @@
+---
+title: "Finalizing Setup (Legacy)"
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+我們將安裝下列程式及插件：
+
++ **Vita Homebrew Browser** *(allows for installing homebrew applications from the internet)*
++ **iTLS Installer** *(adds TLSv1.2 support in older firmwares for online connection)*
++ **NoNpDrm** *(允許您使用已加密的遊戲及應用程式)*
++ **0syscall6** *(允許使用需要更新系統版本的遊戲和應用程式)*
++ **DownloadEnabler** *(允許您在內建的網頁瀏覽器中下載任何檔案類型)*
++ **shellbat** *(於狀態列中顯示剩餘電量)*
++ **pngshot** *(改進內建的截圖程式)*
++ **PSVshell** *(allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)*
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### 必備項目
+
+* 一套 FTP 客戶端軟體，如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
+* 最新版的 [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)
+* 最新版的 [iTLS-Enso](https://github.com/SKGleba/iTLS-Enso/releases/latest/)
+* 最新版的 [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
+* 最新版的 [0syscall6](https://github.com/SKGleba/0syscall6/releases/latest)
+* 最新版的 [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
+* 最新版的 [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
+* 最新版的 [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* 最新版的 [PSVshell](https://github.com/Electry/PSVshell/releases/latest)
+
+### 操作說明
+
+#### 第一節 — 準備工作
+
+1. 啟動 VitaShell
+1. 按下「Start」鍵開啟 VitaShell 設定
+1. 於『SELECT button』上按下「X」鍵以將模式更改為『FTP』
+ + You cannot use USB file transfer for this section
+1. 按下「O」鍵關閉 VitaShell 設定
+1. 按下「Select」鍵以啟動 FTP 存取功能
+1. 於您的電腦中啟動您的 FTP 客戶端
+1. 輸入於您主機上顯示的 IP 位址以及埠
+1. 透過 FTP 端移動至 `ux0:`
+ + `ux0:` 代表著您主機記憶卡的磁區 (在第一代的 Vita 中 (PSV-1000)，本磁區指的是外存記憶卡；在第二代 Vita (PSV-2000) 及 PS TV 中，本磁區指的是內存或者是已插入的外存記憶卡)
+ + `ur0:` 代表著您主機的系統內存；此磁區永遠都會出現在任何主機中 (在第二代 Vita 中 (PSV-2000) 及 PS TV 中，這與普通內存是*不相干的*!)
+1. 刪除可能現有的 `tai` 資料夾
+1. Navigate to the `data/` folder
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. Transfer `iTLS-Enso.vpk` to the `data/` folder
+1. 移動至 `ur0:` -> `tai/`
+1. Transfer `config.txt` to the `tai/` folder
+ + 複寫任何已存在的 `config.txt` 檔案
+1. Transfer `nonpdrm.skprx` to the `tai/` folder
+1. Transfer `0syscall6.skprx` to the `tai/` folder
+1. Transfer `download_enabler.suprx` to the `tai/` folder
+1. Transfer `shellbat.suprx` to the `tai/` folder
+1. Transfer `pngshot.suprx` to the `tai/` folder
+1. Transfer `PSVshell.skprx` to the `tai/` folder
+1. 於您的主機按下「O」鍵以關閉 FTP 連線
+ + For more information on plugins and their installation, read [this webpage](https://samilops2.gitbook.io/vita-troubleshooting-guide/plugins-related-problem/error-when-using-autoplugin)
+
+#### 第二節 — 安裝自製程式
+
+1. 啟動 VitaShell
+1. 移動至 `ux0:` -> `data/`
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
+1. 按下「X」鍵確認安裝
+1. Press (Cross) to confirm the install again when prompted
+
+#### 第三節 — 安裝 iTLS
+
+1. 啟動 iTLS-Enso
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
+
+#### 第四節 — 阻擋系統更新
+
+1. 啟動設定
+1. 移動至 `系統` -> `自動啟動設定`
+1. Uncheck the `Download Update File for System Sofwtare`
+1. 關閉設定
+
+#### 第五節 — PSN 存取
+
+1. 啟動設定
+1. 移動至 `HENkaku 設置`
+1. 勾選『啟用 PSN 偽裝』
+1. 勾選『啟用版本偽裝』
+1. 移動至『偽裝版本』
+1. Enter "3.73" into the box
+ + 如果未來 Sony 推出了新的系統韌體，您必須將此數值更換至最新的系統版本以存取 PSN
+1. 關閉設定
+
+___
+
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/).
+{: .notice--info}
+
+It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
+{: .notice--danger}
+
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
+{: .notice--success}
+
+若您想要於內建的 PSP 模擬器中安裝自製韌體，請見 [Adrenaline](adrenaline)。
+{: .notice--success}
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index 890d5671..20539d90 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -6,86 +6,51 @@ title: "完成安裝"
### 必讀事項
-我們將安裝下列程式及插件：
+We will now setup the following applications:
-+ **Vita Homebrew Browser** *(下載及安裝其他自製軟體)*
-+ **NoNpDrm** *(允許您使用已加密的遊戲及應用程式)*
-+ **reF00D** *(透明化解密任一版本的遊戲及軟體)*
-+ **DownloadEnabler** *(允許您在內建的網頁瀏覽器中下載任何檔案類型)*
-+ **shellbat** *(於狀態列中顯示剩餘電量)*
-+ **pngshot** *(改進內建的截圖程式)*
++ **[Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/)** *(allows for installation of homebrew applications from [VitaDB](https://vitadb.rinnegatamante.it/))*
++ **[iTLS Installer](https://github.com/SKGleba/iTLS-Enso/releases/latest/)** *(adds TLSv1.2 support in older firmwares for online connection)*
-In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
-
-We will also block updates using a DNS server. The server tricks your device into detecting 3.60 as the latest firmware version, meaning it won't update past that. This is useful because 3.60 is the earliest firmware that HENkaku works on. These settings must be applied to every network that you join.
+In order to install the necessary applications on your device, we use the VitaDeploy application to download the latest version of each app.
### 必備項目
-* 一套 FTP 客戶端軟體，如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
- + 或者，您也可以使用 VitaShell 中的 USB 傳輸功能
-* - [keys.bin](magnet:?xt=urn:btih:a3796f22b82b80c5fefa8407c6fd7d71df2c2258&dn=keys.bin&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=http%3A%2F%2Ftracker3.itzmx.com%3A6961%2Fannounce&tr=udp%3A%2F%2Fexplodie.org%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Fipv4.tracker.harry.lu%3A80%2Fannounce&tr=udp%3A%2F%2Fdenis.stalker.upeer.me%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker1.itzmx.com%3A8080%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.cyberia.is%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.stealth.si%3A80%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=http%3A%2F%2Ftracker4.itzmx.com%3A2710%2Fannounce&tr=udp%3A%2F%2Ftracker1.wasabii.com.tw%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce) ([mirror](https://www.mediafire.com/download/t5obgaa3naatr9m))
-* [config.txt]({{ "/assets/files/config.txt" | absolute_url }}){:download="config.txt"}
-* 最新版的 [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest)
-* 最新版的 [NoNpDrm](https://github.com/TheOfficialFloW/NoNpDrm/releases/latest)
-* 最新版的 [reF00D](https://github.com/dots-tb/reF00D/releases/latest)
-* 最新版的 [DownloadEnabler](https://github.com/TheOfficialFloW/VitaTweaks/releases/tag/DownloadEnabler)
-* 最新版的 [shellbat](https://github.com/nowrep/vita-shellbat/releases/latest)
-* 最新版的 [pngshot](https://github.com/xyzz/pngshot/releases/latest)
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
### 操作說明
-#### 第一節 — 準備工作
+#### 第一節 — 安裝自製程式
-1. 啟動 VitaShell
-1. 按下「Start」鍵開啟 VitaShell 設定
-1. 於『SELECT button』上按下「X」鍵以將模式更改為『FTP』
- + 或者，您也可以將此設定為『USB』模式並透過其方式傳輸所有的檔案
- + 若您使用的是 USB 傳輸模式的話，連接的磁區為 ux0
- + 此外，某些檔案將藏於 USB 傳輸模式中；您必須在『檔案總管』的『檢視』設定中開啟『顯示隱藏的檔案、資料夾及磁碟機』並關閉『隱藏保護的作業系統檔案 (建議選項)』
-1. 按下「O」鍵關閉 VitaShell 設定
-1. 按下「Select」鍵以啟動 FTP 存取功能
-1. 於您的電腦中啟動您的 FTP 客戶端
-1. 輸入於您主機上顯示的 IP 位址以及埠
-1. 透過 FTP 端移動至 `ux0:` -> `data/`
- + `ux0:` 代表著您主機記憶卡的磁區 (在第一代的 Vita 中 (PSV-1000)，本磁區指的是外存記憶卡；在第二代 Vita (PSV-2000) 及 PS TV 中，本磁區指的是內存或者是已插入的外存記憶卡)
- + `ur0:` 代表著您主機的系統內存；此磁區永遠都會出現在任何主機中 (在第二代 Vita 中 (PSV-2000) 及 PS TV 中，這與普通內存是*不相干的*!)
-1. 複製 `VitaHBBrowser.vpk` 至 `data` 資料夾中
-1. 透過 FTP 端移動至 `ux0:`
-1. 刪除可能現有的 `tai` 資料夾
-1. 移動至 `ur0:` -> `tai/`
-1. 複製 `config.txt` 至 `tai` 資料夾中
- + 複寫任何已存在的 `config.txt` 檔案
-1. 複製 `nonpdrm.skprx` 至 `tai` 資料夾中
-1. 複製 `reF00D.skprx` 至 `tai` 資料夾中
-1. 複製 `keys.bin` 至 `tai` 資料夾中
-1. 複製 `download_enabler.suprx` 至 `tai` 資料夾中
-1. 複製 `shellbat.suprx` 至 `tai` 資料夾中
-1. 複製 `pngshot.suprx` 至 `tai` 資料夾中
-1. 於您的主機按下「O」鍵以關閉 FTP 連線
-
-#### 第二節 — 安裝 VPKs
-
-1. 於您的主機中移動至 `ux0:` -> `data/`
-1. Press (Cross) on `VitaHBBrowser.vpk` to install it
+1. 啟動 VitaDeploy
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select the following applications:
+ + Vita Homebrew Browser
+ + iTLS Installer
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with a list of two `.vpk` files
+1. Press (Triangle) to open the side menu
+1. Press (Cross) on "Mark all"
+1. Press (Triangle) to open the side menu again
+1. Press (Cross) on "More"
+1. Press (Cross) on "Install all"
1. 按下「X」鍵確認安裝
-1. Press (Cross) to continue the install if you are prompted about extended permissions
-1. Press (Triangle) to open the menu, then select "Delete" to delete the `.vpk` file
-1. 按下「X」鍵確認刪除
-1. 關閉 VitaShell
+1. Press (Cross) to confirm the install again when prompted
+
+#### 第二節 — 安裝 iTLS
+
+1. 啟動 iTLS-Enso
+1. Press (Cross) on "Install the full iTLS package"
+ + If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
+1. Wait for your device to reboot
#### 第三節 — 阻擋系統更新
1. 啟動設定
-1. 移動至 `網路` -> `Wi-Fi 設定`
- + 若您尚未連上網，請連接到 Wi-Fi 網路
-1. 選擇您目前所連結的網路
- + 已連上的網路旁邊會有一個綠色點點
-1. 選擇『詳細設定』
-1. 將『DNS 設定』改為『手動』
- + You must apply the following DNS settings to each network you use
-1. 將『主要 DNS (Primary DNS)』改為 `212.47.229.76`
-1. Set "Secondary DNS" to `212.47.229.76`
-1. 確保您已將『Proxy 伺服器』設定至『不使用』
+1. 移動至 `系統` -> `自動啟動設定`
+1. Uncheck the `Download Update File for System Software`
1. 關閉設定
#### 第四節 — PSN 存取
@@ -95,32 +60,19 @@ We will also block updates using a DNS server. The server tricks your device int
1. 勾選『啟用 PSN 偽裝』
1. 勾選『啟用版本偽裝』
1. 移動至『偽裝版本』
-1. Enter "3.72" into the box
+1. Enter "3.73" into the box
+ 如果未來 Sony 推出了新的系統韌體，您必須將此數值更換至最新的系統版本以存取 PSN
1. 關閉設定
-#### 第五節 — 清理檔案
-
-1. 啟動『內容管理員』
-1. 選擇『管理記憶卡的內容』
-1. 選擇『PS Vita』
-1. 若有看見下列檔案，請將其刪除 (您所看到的檔案將因您的安裝方式而異，因此您可能只會看見部分列出的檔案)：
- + "ensō"
- + "modoru 戻る"
- + "molecularShell"
-1. 使用 3.60 版本的使用者若有看見下列檔案也應將其刪除：
- + "h-encore"
-1. 關閉『內容管理員』
-
___
-您現在可以透過 Vita Homebrew Browser 輕易地安裝任何自製程式。 或者，您也可以在 [VitaDB](https://vitadb.rinnegatamante.it/) 中找尋新的自製程式。
+You can browse for new homebrew applications on [VitaDB](https://vitadb.rinnegatamante.it/) or in the [Vita Homebrew Browser](https://github.com/devnoname120/vhbb/releases/latest/). Please note that Vita Homebrew Browser may take up to 15 minutes to load on first use.
{: .notice--info}
It is *not* recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!
{: .notice--danger}
-若您想要以其他記憶卡代替原廠的 Sony 記憶卡 (比如像是 microSD 或 USB 磁碟)，請見 [StorageMgr](storagemgr)。
+For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the [YAMT](yamt) page.
{: .notice--success}
若您想要於內建的 PSP 模擬器中安裝自製韌體，請見 [Adrenaline](adrenaline)。
diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt
index 11c7e8e7..9552a535 100644
--- a/_pages/zh_TW/get-started.txt
+++ b/_pages/zh_TW/get-started.txt
@@ -11,7 +11,7 @@ title: "新手入門"
在開始前，Windows 使用者應該先透過[顯示副檔名 (Windows)](file-extensions-(windows))教學將副檔名顯示！
{: .notice--info}
-請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
+請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
您的系統版本可以在設定、系統選項中的系統資訊中找到。
@@ -36,23 +36,16 @@ title: "新手入門"
| 1.03 |
- 3.57 |
- 更新至 3.60 |
-
-
- | 3.60 |
- 3.60 |
- 安裝 HENkaku |
-
-
- | 3.61 |
3.63 |
- Updating Firmware (PS Vita)
or
Updating Firmware (PS TV) |
+ Updating Firmware (3.73) |
| 3.65 |
- 3.72 |
+ 3.73 |
安裝 h-encore |
+
+Firmware version 3.60 *can* be modified by using [HENkaku](installing-henkaku), however it's recommended to update to 3.73 for a simplified installation.
+{:.notice--primary}
diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt
index af035bc4..5afc2df6 100644
--- a/_pages/zh_TW/home.txt
+++ b/_pages/zh_TW/home.txt
@@ -63,8 +63,8 @@ Ensō 可在所有持有 3.65 系統版本(含)以下的主機中執行；至於
## 在開始前我得注意什麼？
+ **在開始前，您一定得注意 Vita 改機的風險：每當您修改系統時，都有可能造成無法挽回的磚機。 這種情況是滿罕見的，但還是有可能的；所以請確實遵守每一個步驟。**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
-+ 如果一切都順利的話，您將不會失去任何資料 (像是遊戲、PSN 帳號、存檔... 等都會被留下)。
++ 本教學適用於任意地區持有系統版本 1.03 至 3.73 的所有 PS Vita (厚／薄機) 以及所有 PS TV
++ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc. will be preserved).
+ **請在充電的情況下改機，以確保途中不會因為電力關係而突然關機造成資料遺失或甚至毀損！**
+ PS Vita 2000 及 PS TV 型號的軟體基本上與原版 PS Vita 1000 是非常相似的。 除非特別註明，否則文章中所提及任何關於『PS Vita』的步驟皆適用於其他型號。
+ 如果您使用的是 PS Vita 1000，那麼您必須要有一張原廠 Sony 記憶卡 (任意大小) 才能繼續。 此限制不適用於 PS Vita 2000 或 PS TV，因為這些主機皆有內建記憶卡/內存。
diff --git a/_pages/zh_TW/installing-enso-(3.60).txt b/_pages/zh_TW/installing-enso-(3.60).txt
index c44b4831..00cd79c8 100644
--- a/_pages/zh_TW/installing-enso-(3.60).txt
+++ b/_pages/zh_TW/installing-enso-(3.60).txt
@@ -20,7 +20,7 @@ Ensō 是一套適用於 PS Vita (TV) 的自製韌體方案。透過本方案，
#### 第一節 — 準備工作
-1. 啟動 molecularShell
+1. Launch the molecularShell or VitaShell application
1. 按下「Select」鍵以啟動 FTP 存取功能
1. 於您的電腦中啟動您的 FTP 客戶端
1. 輸入於您主機上顯示的 IP 位址以及埠
@@ -38,7 +38,7 @@ Ensō 是一套適用於 PS Vita (TV) 的自製韌體方案。透過本方案，
1. 當每次提示要求使用更高權限時，按下「X」繼續
1. 按下「△」(三角形) 鍵開啟選單，並選擇『Delete』以刪除所有已選取的檔案
1. 按下「X」鍵確認刪除
-1. 關閉 molecularShell
+1. 關閉 molecularShell 或 VitaShell
#### 第三節 — 安裝 VPK
@@ -49,5 +49,5 @@ Ensō 是一套適用於 PS Vita (TV) 的自製韌體方案。透過本方案，
___
-### 繼續至[完成安裝](finalizing-setup)
+### 繼續至 [完成安裝 (舊版)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/zh_TW/installing-enso-(3.65).txt b/_pages/zh_TW/installing-enso-(3.65).txt
index e0747bc1..07d5c4d8 100644
--- a/_pages/zh_TW/installing-enso-(3.65).txt
+++ b/_pages/zh_TW/installing-enso-(3.65).txt
@@ -53,5 +53,5 @@ title: "安裝 Ensō (版本 3.65)"
___
-### 繼續至[完成安裝](finalizing-setup)
+### 繼續至 [完成安裝 (舊版)](finalizing-setup-(legacy))
{: .notice--primary}
diff --git a/_pages/zh_TW/installing-enso.txt b/_pages/zh_TW/installing-enso.txt
new file mode 100644
index 00000000..0962a1b7
--- /dev/null
+++ b/_pages/zh_TW/installing-enso.txt
@@ -0,0 +1,41 @@
+---
+title: "Installing Ensō"
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+Ensō 是一套適用於 PS Vita (TV) 的自製韌體方案。透過本方案，您的主機能於啟動時自動設置 HENkaku 環境，讓您能輕易地使用自製軟體。
+
+因為 HENkaku 需於每次主機重新啟動時重新手動觸發漏洞，此方案相對方便許多。
+
+In this guide, we'll be using VitaDeploy to install both HENkaku Ensō and firmware version 3.65. If you want to install it manually, follow [Installing Ensō (3.60)](installing-enso-(3.60)) or [Installing Ensō (3.65)](installing-enso-(3.65)).
+
+This mod will make PERMANENT modifications to your device. If anything goes wrong, there is no recovery. While the tool has worked successfully for many users, you take sole responsibility in what happens to your device.
+{:.notice--danger}
+
+### 必備項目
+
+* The VitaDeploy application installed on your device
+ + If you don't have VitaDeploy installed, follow [Installing VitaDeploy](installing-vitadeploy)
+
+### 操作說明
+
+1. 啟動 VitaDeploy
+1. Tap "Install a different OS"
+ + If you don't see a green menu with this option, make sure you have [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku) in HENkaku Settings
+1. Tap "Quick 3.65 Install"
+ + You must be connected to the internet to use this
+1. Wait for the components to download
+1. Press (Cross) to confirm
+1. Read the notice given on the screen and wait 20 seconds
+1. Press (Cross) again to confirm
+ + If you changed your mind, you can press R to exit instead
+
+Your device will then install firmware version 3.65, alongside with HENkaku Ensō. Once finished, it will reboot into CFW mode.
+
+___
+
+### 繼續至[完成安裝](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_TW/installing-h-encore.txt b/_pages/zh_TW/installing-h-encore.txt
index 079478a4..cceb05dd 100644
--- a/_pages/zh_TW/installing-h-encore.txt
+++ b/_pages/zh_TW/installing-h-encore.txt
@@ -1,18 +1,18 @@
---
-title: Installing h-encore
+title: 安裝 h-encore
---
{% include toc title="條目內容" %}
### 必讀事項
-The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
+h-encore 是專門用於 PS Vita (TV) 的漏洞；此漏洞將允許您安裝自製軟體至您的主畫面中。 它與 3.65 至 3.73 的系統韌體相容。
-Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
+請注意，h-encore 漏洞並非「永久性」的 (也就是說該漏洞將於主機重啟後失效)。 也就是說你在每次重啟主機後都必須再觸發一次漏洞。
-In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
+除了安裝 h-encore 漏洞外，我們也將啟用『非安全』的自製程式使用權以提高自製程式的執行權限。 這類似於電腦中的「管理員」權限。
-If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+如果你的主機系統版本在 3.65 至 3.68 之間，則需要使用 h-encore 漏洞破解。如果你的版本在 3.69 至 3.73 以上，則需要使用 h-encore² 來破解。 我們用來安裝漏洞的程式 (finalhe) 應該會幫你處理這些雜項。
如果您使用的是 PS Vita 1000，那麼您必須要有一張原廠 Sony 記憶卡 (任意大小) 才能繼續。 此限制不適用於 PS Vita 2000 或 PS TV，因為這些主機皆有內建記憶卡/內存。
{: .notice--info}
@@ -20,61 +20,61 @@ If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exp
### 必備項目
* 最新版的 [finalhe](https://github.com/soarqin/finalhe/releases/latest)
- - If you are using MacOS or Linux you will be required to compile finalhe yourself
+ - 如果您的系統為 MacOS 或者 Linux，那您得自行編譯 finalhe
+* 最新版的 [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest)
+ - Download the `VitaDeploy-FHE.zip` file
### 操作說明
#### 第一節 — finalhe
-1. 解壓 finalhe `.zip` 的檔案至您電腦的一個資料夾中
+1. 解壓 finalhe `.zip` 的檔案至您電腦的資料夾中
+1. 將 VitaDeploy `.zip` 檔案複製至前述資料夾中
+ + 不要解壓此檔案
1. 在您的電腦中啟動 finalhe
- + If you are prompted to allow finalhe network access through the firewall, do so
+ + 如果您的系統跳出防火牆警示，請允許 finalhe 連接至網路
1. 於您的主機中啟動「內容管理員」
1. 選擇『複製內容』
-1. 選擇『個人電腦』
+ + If your device is already connected to your computer via USB, you can skip to [Section II - h-encore Transfer](#section-ii---h-encore-transfer)
+ + 如果您的電腦偵測不到您主機的 USB 連線的話，請安裝 [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.91/QcmaDriver_winusb.exe) 並再試一次
+1. 選擇『PC』
1. 選擇您想要連接至 finalhe 的方式
+ 如果您被要求登入至 PlayStation Network，請登入
+ 如果您並沒有一隻 PlayStation Network 的帳號，請創立一隻
-1. 如提示時，選擇／註冊您的電腦
+1. 如提示時，選擇或註冊您的電腦
+ 若有提示更新的警示，請重新啟動您的主機並再試一次
- + 若您仍遇到該警示，請見[阻擋更新](blocking-updates)並再試一次
- + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
- + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+ + 若您還是遇到該警示，於系統設定中啟用飛航模式並再試一次 (PS TV 將無法使用此步驟)
+ + If you *still* encounter this message, update to the latest firmware version and try again
#### 第二節 — h-encore 轉移
-1. 選擇『Trim h-encore to ~13MB』
- + Only do this step if you are on 3.68 or below
-1. 選擇『Let's GO!』
+1. 選擇『Trim h-encore to ~7MB』
+1. Click on the small arrow on the right-hand side of the finalhe window
+ + This can be hard to spot, especially on high-DPI displays
+1. Tick the "VitaDeploy" box
+1. Click "Let's GO!"
+ 漏洞所需檔案將自動被下載及自動進行其前置作業
+ 此過程將花費一些時間
-1. 於您的主機中選擇『個人電腦 -> PS Vita』
-1. 選擇『應用程式』
-1. 選擇『PS Vita』
+1. Tap "PC -> PS Vita System" or "PC -> PS TV System" on your device
+1. Tap "Applications"
+1. Tap "PS Vita"
1. Select "h-encore" or "h-encore²" depending on which is displayed
-1. 選擇『複製』
-1. 選擇『OK』
- + h-encore 漏洞將會被複製到您的主機中
+1. Select "VitaDeploy"
+1. Tap "Copy"
+1. Tap "OK"
+ + The h-encore exploit and VitaDeploy application will be copied to your device
+ 此過程將花費一些時間
1. 於您的主機中關閉「內容管理員」
1. 在您的電腦中關閉 finalhe
#### 第三節 — 設定 h-encore
-h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
-{: .notice--warning}
-
-1. 於啟動 h-encore 時按住『R』鍵
- + 如提示獎盃相關訊息時，按住「R」並選擇『是 (Yes)』
+1. Launch the h-encore(²) application
+ + If prompted about trophies, select "Yes"
1. 如果漏洞成功執行的話，您將會看到 h-encore 引導選單
- + 如果執行此漏洞時卡在白屏的畫面的話，試著關閉本程式 (過程中您的主機會當機並重啟) 並再試一次
- + 如果您仍然卡死在此步驟，按住電源紐30秒以強制重啟，並再試一次
-1. 選擇『Install HENkaku』
- + 這將會安裝 HENkaku 漏洞，並啟用自製軟體存取權直到下次重啟
-1. 選擇『Download VitaShell』
- + 這將會安裝自製軟體 VitaShell 以管理您主機的檔案系統
- + VitaShell (以及所有其他的自製軟體) 於重啟後仍會保持其安裝狀態，但如果沒有先執行 HENkaku 漏洞的話將無法執行
-1. 選擇『Exit』
+ + If the exploit gets stuck, reboot your device and try again
+ + If you can't reboot normally, hold the power button down for over 30 seconds to force a reboot
+1. Press (Cross) to exit the application
#### 第四節 — 設定 HENkaku
@@ -85,7 +85,20 @@ h-encore² only has a ~25% success rate. It may take a long time to launch the h
1. 回到 HENkaku 設置選單
1. 關閉設定
+#### Section V - Installing essential homebrew
+
+1. 啟動 VitaDeploy
+1. Tap "App downloader"
+ + If you don't see a green menu with this option, make sure you've [enabled unsafe homebrew](installing-h-encore#section-iv---configuring-henkaku)
+1. Select "[VitaShell](https://github.com/TheOfficialFloW/VitaShell/releases/latest/) *(A powerful file manager)*""
+1. Tap "Download the selected apps"
+1. Wait for the app to finish downloading
+ + When finished, you should be presented with the `VitaShell.vpk` file
+1. Press (Cross) on the `VitaShell.vpk` file to install it
+1. 按下「X」鍵確認安裝
+1. Press (Cross) to confirm the install again when prompted
+
___
-### Continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+### 繼續至 [安裝 Ensō](installing-enso)
{: .notice--primary}
diff --git a/_pages/zh_TW/installing-henkaku.txt b/_pages/zh_TW/installing-henkaku.txt
index f2eecf56..b7eb6172 100644
--- a/_pages/zh_TW/installing-henkaku.txt
+++ b/_pages/zh_TW/installing-henkaku.txt
@@ -10,7 +10,7 @@ HENkaku 是一系列專門用於 PS Vita (TV) 的漏洞；此漏洞將允許您
請注意，HENkaku 系列漏洞並非「永久性」的 (也就是說該漏洞將於主機重啟後失效)。 好消息是待會可以安裝 HENkaku Ensō 來解決這問題。
-除了運行 HENkaku 漏洞外，我們也將啟用『非安全』的自製程式使用權以提高自製程式的執行權限。 這類似於電腦中的「管理員」權限。
+除了運行 HENkaku 漏洞外，我們也將啟用『非安全』的自製程式使用權以提高自製程式的執行權限。 This idea could be considered analogous to the "administrator" mode on a computer.
如果您使用的是 PS Vita 1000，那麼您必須要有一張原廠 Sony 記憶卡 (任意大小) 才能繼續。 此限制不適用於 PS Vita 2000 或 PS TV，因為這些主機皆有內建記憶卡/內存。
{: .notice--info}
@@ -29,7 +29,10 @@ HENkaku 是一系列專門用於 PS Vita (TV) 的漏洞；此漏洞將允許您
1. 閱讀免責聲明，然後點選『Install』
+ 如果遇到錯誤且無法繼續的話， [請依循此疑難排解之步驟](troubleshooting#a-browser-based-exploit-is-not-working)
1. 如果漏洞執行成功，您的 LiveArea 頁面中將出現一個新的應用程式叫做『molecularShell』。
- + 若漏洞成功執行卻沒看到 molecularShell 程式，請再執行一次此漏洞並於提示重新安裝 molecularShell 時按下「R1」
+ + If the exploit was successful but the molecularShell application is missing, perform the exploit again and press R1 when prompted to re-install molecularShell.
+
+If you have just downgraded and have VitaShell in your memory card, HENkaku won't install molecularShell as it will detect a pre-existing taiHEN config. This will not be an issue.
+{: .notice--warning}
#### 第二節 — 設定 HENkaku
diff --git a/_pages/zh_TW/installing-vitadeploy.txt b/_pages/zh_TW/installing-vitadeploy.txt
new file mode 100644
index 00000000..65c983c1
--- /dev/null
+++ b/_pages/zh_TW/installing-vitadeploy.txt
@@ -0,0 +1,40 @@
+---
+title: "Installing VitaDeploy"
+---
+
+{% include toc title="條目內容" %}
+
+The guide uses the VitaDeploy application as the primary method of installing other apps and a custom firmware. If you didn't install VitaDeploy when installing h-encore, you can install it yourself with molecularShell or VitaShell.
+
+In order to install the necessary `.vpk` (content package) file on your device, we use the [File Transfer Protocol (FTP)](https://wikipedia.org/wiki/File_Transfer_Protocol) to copy the files to your device's memory card.
+
+### 必備項目
+
+* 一套 FTP 客戶端軟體，如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ + 或者，您也可以使用 VitaShell 中的 USB 傳輸功能
+* 最新版的 [VitaDeploy](https://github.com/SKGleba/VitaDeploy/releases/latest/)
+ + 下載 `VitaDeploy.vpk`
+
+#### 第一節 — 準備工作
+
+1. 啟動 VitaShell
+1. 按下「Start」鍵開啟 VitaShell 設定
+1. 於『SELECT button』上按下「X」鍵以將模式更改為『FTP』
+ + 或者，您也可以將此設定為『USB』模式並透過其方式傳輸所有的檔案
+1. 按下「O」鍵關閉 VitaShell 設定
+1. 按下「Select」鍵以啟動 FTP 存取功能
+1. 於您的電腦中啟動您的 FTP 客戶端
+1. 輸入於您主機上顯示的 IP 位址以及埠
+1. 透過 FTP 端移動至 `ux0:` -> `data/`
+1. Transfer `VitaHBBrowser.vpk` to the `data/` folder
+1. 於您的主機按下「O」鍵以關閉 FTP 連線
+
+#### 第二節 — 安裝程式
+
+1. 啟動 VitaShell
+1. 移動至 `ux0:` -> `data/`
+1. Press (Cross) on "VitaDeploy.vpk"
+1. 按下「X」鍵確認安裝
+1. Press (Cross) to confirm the install again when prompted
+
+VitaDeploy should now be installed to your home screen.
diff --git a/_pages/zh_TW/privacy-policy.txt b/_pages/zh_TW/privacy-policy.txt
index e2437c10..5f395fbc 100644
--- a/_pages/zh_TW/privacy-policy.txt
+++ b/_pages/zh_TW/privacy-policy.txt
@@ -5,7 +5,7 @@ layout: single-no-ads
### Cookies
-本站透過 Cookies 引導用戶使用此手冊。 Cookies 讓手冊能在側欄顯示當前的進度，幫助用戶更容易的找到下一步指示。
+This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies 讓手冊能在側欄顯示當前的進度，幫助用戶更容易的找到下一步指示。
### 來自其他網站的嵌入內容
diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt
index 02e31975..cfd2d697 100644
--- a/_pages/zh_TW/site-navigation.txt
+++ b/_pages/zh_TW/site-navigation.txt
@@ -9,29 +9,32 @@ sitemap: false
+ [Adrenaline](adrenaline)
+ [阻擋更新](blocking-updates)
-+ [Configuring h-encore](configuring-h-encore)
++ [設定 h-encore](configuring-h-encore)
+ [製作群](credits)
+ [贊助](donations)
-+ [Downgrading Firmware (3.60)](downgrading-firmware-(3.60))
-+ [Downgrading Firmware (3.65)](downgrading-firmware-(3.65))
++ [降級韌體 (版本 3.60)](downgrading-firmware-(3.60))
++ [降級韌體 (版本 3.65)](downgrading-firmware-(3.65))
+ [常見問題 FAQ](faq)
+ [檔案副檔名 (Windows)](file-extensions-(windows))
++ [完成安裝 (舊版)](finalizing-setup-(legacy))
+ [完成安裝](finalizing-setup)
+ [新手入門](get-started)
+ [首頁](/zh_TW/)
+ [安裝 Ensō (版本 3.60)](installing-enso-(3.60))
-+ [Installing Ensō (3.65)](installing-enso-(3.65))
++ [安裝 Ensō (版本 3.65)](installing-enso-(3.65))
++ [安裝 Ensō](installing-enso)
+ [安裝 h-encore](installing-h-encore)
+ [安裝 HENkaku](installing-henkaku)
-+ [Privacy Policy](privacy-policy)
++ [隱私政策](privacy-policy)
+ [格式化儲存空間 (Linux)](storage-format-(linux))
+ [格式化儲存空間 (Mac)](storage-format-(mac))
+ [格式化儲存空間 (Windows)](storage-format-(windows))
-+ [StorageMgr](storagemgr)
+ [疑難排解](troubleshooting)
+ [更新韌體 (3.60)](updating-to-3.65-(henkaku))
-+ [Updating Firmware (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
-+ [Updating Firmware (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
++ [更新韌體 (3.73)](updating-firmware-(3.73))
++ [更新韌體 (PS TV 3.65)](updating-firmware-(ps-tv-3.65))
++ [更新韌體 (PS Vita 3.65)](updating-firmware-(ps-vita-3.65))
+ [為什麼有廣告?](why-ads)
++ [YAMT](yamt)
{% endcapture %}
{{ notice-2 | markdownify }}
diff --git a/_pages/zh_TW/storage-format-(linux).txt b/_pages/zh_TW/storage-format-(linux).txt
index 4a16c2eb..e00813e6 100644
--- a/_pages/zh_TW/storage-format-(linux).txt
+++ b/_pages/zh_TW/storage-format-(linux).txt
@@ -1,49 +1,49 @@
---
-title: "Storage Format (Linux)"
+title: "格式化儲存空間 (Linux)"
---
{% include toc title="條目內容" %}
### 必讀事項
-This is an add-on section for formatting a storage device for use with the StorageMgr kernel plugin.
+本篇為額外章節。本章節將教您如何準備並格式化任意儲存裝置以便與 StorageMgr 內核插件相並使用。
-Additionally, there is an optional section for checking your storage device for errors using F3. Depending on the size of your storage device and the speed of your computer, the checking process can take up to several hours!
+除此之外，本節另有提供額外的選用章節將教您如何透過 F3 檢查您的儲存裝置是否健全。 根據您儲存空間的大小和電腦的速度，此過程可能需要幾個小時 ！
-This page is for Linux users only. If you are not on Linux, check out the [Storage Format (Windows)](storage-format-(windows)) or [Storage Format (Mac)](storage-format-(mac)) pages.
+本教學僅適用於 Linux 使用者。 若您並非 Linux 使用者，請見[格式化儲存空間 (Windows)](storage-format-(windows)) 或 [格式化儲存空間 (Mac)](storage-format-(mac)) 頁面。
### 必備項目
-* The latest version of [exfat-utils](https://github.com/relan/exfat) for your distribution (check your package manager)
-* The latest version of [fuse-exfat](https://github.com/relan/exfat) for your distribution (check your package manager)
-* The latest version of [F3](https://github.com/AltraMayor/f3/releases/latest)
- + This is not required if you do not want to check your storage device for errors
+* 適用於您 Linux 發行版的 [exfat-utils](https://github.com/relan/exfat) (請見您系統的 package manager)
+* 適用於您 Linux 發行版的 [fuse-exfat](https://github.com/relan/exfat) (請見您系統的 package manager)
+* 最新版的 [F3](https://github.com/AltraMayor/f3/releases/latest)
+ + 如果您不想檢查您的儲存裝置是否有誤，您可忽略本需求
### 操作說明
-#### Section I - Formatting Storage Device
+#### 第一節 — 格式化儲存空間
-1. Insert your storage device into your computer
-1. Unmount your storage device with `umount`
-1. Run `sudo dd if=/dev/zero of=/dev/sdX` to wipe the storage device
- + `sdX` should be the device corresponding to your storage device
-1. Remove your storage device from your computer
-1. Re-insert your storage device into your computer
-1. Run `mkfs.exfat /dev/sdX` to format your storage device as exFAT
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 透過 `unmount` 指令將此儲存裝置卸除
+1. 運行 `sudo dd if=/dev/zero of=/dev/sdX` 將此儲存空間清除
+ + `sdX` 應與您的儲存裝置的代號相同
+1. 將該儲存裝置從電腦中拔除
+1. 重新插入該儲存裝置
+1. 運行 `mkfs.exfat /dev/sdX` 以將您的儲存裝置格式化為 exFAT
+ + 如果你的儲存空間容量為 256GB 或更大，你必須將格式化時設置的分配單元大小設置為 64 KB
-#### Section II - Verifying Storage Device
+#### 第二節 — 檢查儲存空間
-If you do not want to check your storage device for errors, skip this section.
+如果您不想檢查您的儲存裝置是否有誤，請跳過本節。
{: .notice--info}
-1. Unzip the f3 `.zip` file
-1. `cd` into the f3 directory
-1. Run `make` to compile F3
-1. Insert your storage device into your computer
-1. Mount your storage device
-1. Run `./f3write `
-1. Wait until the process is complete. See below for an example output.
+1. 解壓 f3 `.zip`
+1. `cd` 至 f3 目錄中
+1. 運行 `make` 以編譯 F3
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 掛載您的儲存裝置
+1. 輸入 `./f3write <您儲存裝置的掛載點>`
+1. 等到檢查完畢為止。 可以參考底下的範例。
~~~ bash
$ ./f3write /media/michel/6135-3363/
@@ -55,8 +55,8 @@ Free space: 0.00 Byte
Average Writing speed: 4.90 MB/s
~~~
-1. Run `./f3read `
-1. Wait until the process is complete. See below for an example output.
+1. 輸入 `./f3read <您儲存裝置的掛載點>`
+1. 等到檢查完畢為止。 可以參考底下的範例。
~~~ bash
$ ./f3read /media/michel/6135-3363/
@@ -73,10 +73,10 @@ Data LOST: 0.00 Byte (0 sectors)
Average Reading speed: 9.42 MB/s
~~~
-If the test shows the result `Data LOST: 0.00 Byte (0 sectors)` your storage device is good and you can delete all `.h2w` files on your storage device
+如果結果顯示 `Data LOST: 0.00 Byte (0 sectors)`，則表示您的儲存裝置是沒問題的，接著就可以刪除儲存空間中所有的 `.h2w` 檔案了
{: .notice--success}
-If the test shows any other results, your storage device may be corrupted or damaged and you may have to replace it!
+如果出現任何其他結果，您的儲存裝置可能是有問題且需要更換的！
{: .notice--danger}
___
diff --git a/_pages/zh_TW/storage-format-(mac).txt b/_pages/zh_TW/storage-format-(mac).txt
index 0f6579a8..7696a6ce 100644
--- a/_pages/zh_TW/storage-format-(mac).txt
+++ b/_pages/zh_TW/storage-format-(mac).txt
@@ -1,49 +1,51 @@
---
-title: "Storage Format (Mac)"
+title: "格式化儲存空間 (Mac)"
---
{% include toc title="條目內容" %}
### 必讀事項
-This is an add-on section for formatting a storage device for use with the StorageMgr kernel plugin.
+本篇為額外章節。本章節將教您如何準備並格式化任意儲存裝置以便與 StorageMgr 內核插件相並使用。
-Additionally, there is an optional section for checking your storage device for errors using F3X. Depending on the size of your storage device and the speed of your computer, the checking process can take up to several hours!
+除此之外，本節另有提供額外的選用章節將教您如何透過 F3X 檢查您的儲存裝置是否健全。 根據您儲存空間的大小和電腦的速度，此過程可能需要幾個小時 ！
-This page is for Mac users only. If you are not on Mac, check out the [Storage Format (Windows)](storage-format-(windows)) or [Storage Format (Linux)](storage-format-(linux)) pages.
+本教學僅適用於 Mac 使用者。 若您並非 Mac 使用者，請見[格式化儲存空間 (Windows)](storage-format-(windows)) 或 [格式化儲存空間 (Linux)](storage-format-(linux)) 頁面。
### 必備項目
-* The latest release of [F3X](https://github.com/insidegui/F3X/releases/latest)
- + This is not required if you do not want to check your storage device for errors
+* 最新版的 [F3X](https://github.com/insidegui/F3X/releases/latest)
+ + 如果您不想檢查您的儲存裝置是否有誤，您可忽略本需求
### 操作說明
-#### Section I - Formatting Storage Device
+#### 第一節 — 格式化儲存空間
-1. Insert your storage device into your computer
-1. Launch Disk Utility
-1. Select your storage device
-1. Select the "Partition" menu
-1. Partition your storage device as MBR with one exFAT partition
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 開啟終端機
+1. 在終端機中輸入 `diskutil list`
+1. Identify which disk is your storage device in the format `/dev/diskX`
+1. Enter `diskutil unmount /dev/diskX` and then `sudo dd if=/dev/zero of=/dev/diskX` to format the storage device
+1. Remove and reinsert your storage device
+1. Enter `sudo newfs_exfat -R /dev/diskX` to format your storage device into exfat
+ + If your storage device has a capacity of 256 GB or greater, you must run `sudo newfs_exfat -R -c 64 /dev/diskX`
-#### Section II - Verifying Storage Device
+#### 第二節 — 檢查儲存空間
-If you do not want to check your storage device for errors, skip this section.
+如果您不想檢查您的儲存裝置是否有誤，請跳過本節。
{: .notice--info}
-1. Unzip the F3X `.zip` file
-1. Insert your storage device into your computer
-1. Run the F3X app
-1. Select your storage device
-1. Press "Start Test"
-1. Wait until the process is complete.
+1. 解壓 F3X `.zip` 壓縮檔
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 開啟 F3X
+1. 選擇您的儲存裝置
+1. 按下『開始測試 (Start Test)』
+1. 等到檢查完畢為止。
-If the test shows the result `Success! Your card is ok!` your storage device is good and you can delete all `.h2w` files on your storage device
+如果測試顯示的結果『成功 ！ 您的卡一切正常！(Success! Your card is ok!)』表示您的儲存裝置是正常的，然後您可以刪除上面所有的 `.h2w` 檔案
{: .notice--success}
-If the test shows any other results, your storage device may be corrupted or damaged and you may have to replace it!
+如果出現任何其他結果，您的儲存裝置可能是有問題且需要更換的！
{: .notice--danger}
___
diff --git a/_pages/zh_TW/storage-format-(windows).txt b/_pages/zh_TW/storage-format-(windows).txt
index 5e22e609..d66659b5 100644
--- a/_pages/zh_TW/storage-format-(windows).txt
+++ b/_pages/zh_TW/storage-format-(windows).txt
@@ -1,67 +1,67 @@
---
-title: "Storage Format (Windows)"
+title: "格式化儲存空間 (Windows)"
---
{% include toc title="條目內容" %}
### 必讀事項
-This is an add-on section for formatting a storage device for use with the StorageMgr kernel plugin.
+本篇為額外章節。本章節將教您如何準備並格式化任意儲存裝置以便與 StorageMgr 內核插件相並使用。
-Additionally, there is an optional section for checking your storage device for errors using h2testw. Depending on the size of your storage device and the speed of your computer, the checking process can take up to several hours!
+除此之外，本節另有提供額外的選用章節將教您如何透過 h2testw 檢查您的儲存裝置是否健全。 根據您儲存空間的大小和電腦的速度，此過程可能需要幾個小時 ！
-This page is for Windows users only. If you are not on Windows, check out the [Storage Format (Linux)](storage-format-(linux)) or [Storage Format (Mac)](storage-format-(mac)) pages.
+本教學僅適用於 Windows 使用者。 若您並非 Windows 使用者，請見[格式化儲存空間 (Linux)](storage-format-(linux)) 或 [格式化儲存空間 (Mac)](storage-format-(mac)) 頁面。
### 必備項目
* [zzBlank.img]({{ "/assets/files/zzBlank.img" | absolute_url }})
-* The latest version of [Win32DiskImager](https://sourceforge.net/projects/win32diskimager/)
-* The latest version of [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)
- + This is not required if you do not want to check your storage device for errors
+* 最新版的 [Win32DiskImager](https://sourceforge.net/projects/win32diskimager/)
+* 最新版的 [h2testw](http://www.heise.de/ct/Redaktion/bo/downloads/h2testw_1.4.zip)
+ + 如果您不想檢查您的儲存裝置是否有誤，您可忽略本需求
### 操作說明
-#### Section I - Formatting Storage Device
+#### 第一節 — 格式化儲存空間
-1. Install Win32DiskImager if you have not already
-1. Insert your storage device into your computer
-1. Launch Win32DiskImager
-1. Select `zzBlank.img` as the "Image File"
-1. Set "Device" to the drive letter of your storage device
-1. Select "Write"
-1. Select "Yes" to continue when prompted
-1. Select "OK" to dismiss the dialogue box when the write completes
-1. Close Win32DiskImager
-1. Right-click the drive in Windows Explorer, then select "Format"
-1. Set "File system" to "exFAT"
- + If your storage device has a capacity of 256 GB or greater, you must format with a cluster size of 64 KB
-1. Select "Start"
-1. Select "OK" to continue when prompted
-1. Select "OK" to dismiss the dialogue box when the format completes
-1. Close the format window
+1. 安裝 Win32DiskImage
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 啟動 Win32DiskImager
+1. 選擇 `zzBlank.img` 作為其『Image File』
+1. 將『Device』設為您儲存裝置的磁碟代號
+1. 選擇『Write』
+1. 當提示時按下『是』
+1. 當寫入完畢後按下『OK』以忽略完成的提示
+1. 關閉 Win32DiskImager
+1. 透過檔案管理員於您的儲存裝置按下右鍵並選擇『格式化』
+1. 選擇『File system』為『exFAT』
+ + 如果你的儲存空間容量為 256GB 或更大，你必須將格式化時設置的分配單元大小設置為 64 KB
+1. 選擇『Start』
+1. 當提示時按下『OK』
+1. 當格式化完畢後按下『OK』以忽略完成的提示
+1. 關閉格式化視窗
-#### Section II - Verifying Storage Device
+#### 第二節 — 檢查儲存空間
-If you do not want to check your storage device for errors, skip this section.
+如果您不想檢查您的儲存裝置是否有誤，請跳過本節。
{: .notice--info}
-1. Copy `h2testw.exe` from the h2testw `.zip` to your desktop
-1. Insert your storage device card into your computer
-1. Run `h2testw.exe`
-1. Select "English"
-1. Select "Select target"
-1. Select your storage device card's drive letter
-1. Ensure "all available space" is selected
-1. Select "Write + Verify"
-1. Wait until the process is completed
+1. 從 h2testw `.zip` 中解壓 `h2testw.exe`
+1. 將您所想使用的儲存裝置插入至電腦中
+1. 開啟 `h2testw.exe`
+1. 選擇『英語 (English)』
+1. 選擇『Select target』
+1. 選擇您儲存裝置的磁區代號
+1. 確保『all available space』為以勾選狀態
+1. 選擇『Write + Verify』
+1. 等到檢查完畢為止。
-If the test shows the result `Test finished without errors`, your storage device card is good and you can delete all `.h2w` files on your storage device card
+如果結果顯示`Test finished without errors`，則表示您的儲存空間是沒問題的，接著就可以刪除裝置上所有的`.h2w`檔案了
{: .notice--success}
-If the test shows any other results, your storage device card may be corrupted or damaged and you may have to replace it!
+如果出現任何其他結果，您的儲存裝置可能是有問題且需要更換的！
{: .notice--danger}
___
-### Return to [StorageMgr](storagemgr)
-{: .notice--primary}
\ No newline at end of file
+### 返回至 [StorageMgr](storagemgr)
+{: .notice--primary}
diff --git a/_pages/zh_TW/storagemgr.txt b/_pages/zh_TW/storagemgr.txt
index 26ebb9b8..60224d44 100644
--- a/_pages/zh_TW/storagemgr.txt
+++ b/_pages/zh_TW/storagemgr.txt
@@ -6,9 +6,9 @@ title: "StorageMgr"
### 必讀事項
-StorageMgr 是一個適用於 PS Vita (TV) 的多功能內核插件；此插件將允許您使用其他儲存裝置如 USB 隨身碟、SD2Vita、或 psvd。
+StorageMgr 是一個適用於 PS Vita (TV) 的多功能內核插件；此插件將允許您使用其他儲存裝置如 USB 隨身碟、SD2Vita、或 psvsd。
-SD2Vita 是個 microSD 至 Vita 卡的轉接器，讓您能將其插入至主機的 Vita 卡槽中；psvd 則是個 microSD 轉接器，用於替代 3G 型號中的數據機。
+SD2Vita 是個 microSD 至 Vita 卡的轉接器，讓您能將其插入至主機的 Vita 卡槽中；psvsd 則是個 microSD 轉接器，用於替代 3G 型號中的數據機。
透過 StorageMgr 插件，您的隨身碟或 microSD 卡將會被加載到 `ux0:` 底下，就跟普通的 Sony 原廠記憶卡一樣。 這是非常有用的，因為 microSD 卡與原廠 Sony Vita 記憶卡相比價錢天差地別 (尤其是容量較大的記憶卡)。
@@ -27,7 +27,7 @@ SD2Vita 是個 microSD 至 Vita 卡的轉接器，讓您能將其插入至主機
+ 依您的情形修改 `storage_config.txt`，請見[README](https://github.com/CelesteBlue-dev/PSVita-StorageMgr/blob/master/README.md#how-to-configure-storagemgr-)
+ `MCD=uma0` 應被保留，除非您並不希望繼續使用 Sony 原廠的記憶卡
+ `INT=imc0` PS Vita 2000 及 PS TV 用戶不需更改此選項，而 PS Vita 1000 的用戶應該將此選項移除
- + `GCD=ux0` SD2Vita 用戶不需更改此選項，而 psvd 或隨身碟的用戶需將該選項改為 `UMA=ux0`
+ + `GCD=ux0` SD2Vita 用戶不需更改此選項，而 psvsd 或隨身碟的用戶需將該選項改為 `UMA=ux0`
+ `UMA=grw0` 除非您有多項儲存空間否則請刪除此選項 (若真如此，未分發至 `ux0:` 的裝置應被分發至 `grw0:` 當中)
### 操作說明
@@ -43,12 +43,13 @@ SD2Vita 是個 microSD 至 Vita 卡的轉接器，讓您能將其插入至主機
+ 如果您並沒有 `ux0:tai/` 的資料夾的話，請略過本步驟
1. 複製 `storagemgr.skprx` 至 `ur0:tai/` 資料夾中
1. 複製 `storage_config.txt` 至 `ur0:tai/` 資料夾中
-1. 將 `ur0:tai/config.txt` 中所有的 `ux0:tai/` 替換為 `ur0:tai/`
+1. 將 `ur0:tai/config.txt` 中所有的 `ux0:tai/` 替換為 `ur0:tai/`
+ 如果您並沒有 `ux0:tai/` 的資料夾的話，請略過本步驟
1. 將下列的字串加入至 `ur0:tai/config.txt` 中 `*KERNEL` 行列下：
+ `ur0:tai/storagemgr.skprx`
1. 刪除 `ux0:tai/` 資料夾
-
+ + 本步驟很重要！因為當 HENkaku 檢測到 `ux0:tai`，它則不會加載任何在 `ur0:tai` 中的插件
+
#### 第二節 — 還原資料
本節將會從您舊的 Sony 記憶卡內容複製到新的儲存裝置中。
@@ -72,13 +73,16 @@ ___
{% capture notice-1 %}
如果您想要清理您記憶卡中的內容 (假設說您想存放 PSP 遊戲之類的)，您可將 `uma0:` (新的記憶卡掛載點) 以及/或者 `imc0:` (適用於 PS Vita 2000 或 PS TV) 中的資料刪除。
-如果您想要做清理的動作，且您的主機為正使用 h-encore 且持有韌體版本 3.67 或 3.68 的主機，您*千萬不可*刪除下列資料夾:
+如果你決定這樣做，*千萬不要*刪除以下資料夾：
+ + `uma0:data/bootstrap.self`
+ `uma0:app/PCSG90096`
+ `uma0:appmeta/PCSG90096`
- + `uma0:data/bootstrap.self`
+ + `uma0:appmeta/VITASHELL`
+ `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
這是因為 h-encore 得保持其記憶卡中的安裝狀態，這樣您才能在重啟後啟用 HENkaku (及 StorageMgr)。
{% endcapture %}
diff --git a/_pages/zh_TW/troubleshooting.txt b/_pages/zh_TW/troubleshooting.txt
index 39494574..d90c38f4 100644
--- a/_pages/zh_TW/troubleshooting.txt
+++ b/_pages/zh_TW/troubleshooting.txt
@@ -18,6 +18,7 @@ title: "疑難排解"
1. 啟動網頁瀏覽器，並進入瀏覽器設定
1. 移動至設定最下方，並點選『刪除 Cookies』以及『清除搜尋紀錄』
1. 再試一次
+ + If it still doesn't work, try to reboot, wait 5 minute, and open the browser
## 如何在不格式化主機的情況下清除 PSN 帳號
@@ -30,4 +31,5 @@ title: "疑難排解"
1. 於開機時按住 L 以關閉 TaiHEN 插件讀取
1. 如果您的主機可以因此順利開機，請試著變更 `ux0:tai/config.txt` 並移除您最新所安裝的插件
-1. 如果上列步驟無效，您的主機很有可能已經變磚
\ No newline at end of file
+1. 如果上列步驟無效，您的主機很有可能已經變磚
+ + In unlikely event of this happening, please follow [this tutorial](https://samilops2.gitbook.io/vita-troubleshooting-guide/serious-problems/bootloop)
diff --git a/_pages/zh_TW/updating-firmware-(3.73).txt b/_pages/zh_TW/updating-firmware-(3.73).txt
new file mode 100644
index 00000000..6e098c3a
--- /dev/null
+++ b/_pages/zh_TW/updating-firmware-(3.73).txt
@@ -0,0 +1,24 @@
+---
+title: "Updating Firmware (3.73)"
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+The h-encore exploit is only compatible with the firmware versions 3.65 and above. As a result, lower firmware versions must update to the latest firmware to use the exploit.
+
+### 必備項目
+
+* 在您的 PS Vita (TV) 可用的網路連線
+
+### 操作說明
+
+1. 移動至 `系統更新` -> `使用 Wi-Fi／行動網路更新`
+1. Follow the prompts to update your device to 3.73
+ + 當更新完畢後，您的主機將自動重啟
+
+___
+
+### 繼續至 [安裝 h-encore](installing-h-encore)
+{: .notice--primary}
diff --git a/_pages/zh_TW/yamt.txt b/_pages/zh_TW/yamt.txt
new file mode 100644
index 00000000..053b534c
--- /dev/null
+++ b/_pages/zh_TW/yamt.txt
@@ -0,0 +1,131 @@
+---
+title: "YAMT (SD2Vita)"
+excerpt: "Guide on installing the YAMT plugin for SD2Vita."
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+YAMT (Yet Another Mount Tool) is a multi-purpose kernel plugin for the PS Vita (TV) which allows for the use of a microSD card as a storage device via an SD2Vita adapter. The SD2Vita is a microSD to game card adapter which is inserted into the game-card slot in your device.
+
+By using the YAMT kernel plugin, the USB drive or microSD card you use will be mounted to `ux0:` just like a Sony memory card. 這是非常有用的，因為 microSD 卡與原廠 Sony Vita 記憶卡相比價錢天差地別 (尤其是容量較大的記憶卡)。
+
+本節將使用 FTP (檔案傳輸協定) 以與您的電腦及 Vita 進行連接並傳輸檔案，因此這兩台裝置得必須連到同一個網路下才能繼續。
+
+If you're using a USB drive or psvsd adapter, or if this method doesn't work for you, follow the [StorageMgr](storagemgr) guide.
+{: .notice--primary}
+
+Samsung Evo cards are not compatible with YAMT. If you have a Samsung Evo MicroSD card please follow the [StorageMgr](storagemgr) guide.
+{: .notice--warning}
+
+YAMT is only compatible with firmware versions 3.60 and 3.65 on HENkaku Ensō.
+{: .notice--info}
+
+### 必備項目
+
+* A storage device compatible with your system
+ + This can be a microSD card to use in an SD2Vita or psvsd adapter, or a USB device for a PS TV console
+* 一套 FTP 客戶端軟體，如 [WinSCP](https://winscp.net/) 或 [CyberDuck](https://cyberduck.io/)
+ + 或者，您也可以使用 VitaShell 中的 USB 傳輸功能
+* 最新版的 [yamt-vita](https://github.com/SKGleba/yamt-vita/releases)
+* 最新版的 [storageFormat](https://github.com/SKGleba/VitaTools/raw/main/storageFormat/build/storageFormat.vpk)
+
+### 操作說明
+
+#### 第一節 — 準備工作
+
+1. 啟動 VitaShell
+1. 按下「Select」鍵以啟動 FTP 存取功能
+1. 於您的電腦中啟動您的 FTP 客戶端
+1. 輸入於您主機上顯示的 IP 位址以及埠
+1. 透過 FTP 端移動至 `ux0:` -> `data/`
+1. Transfer `yamt.vpk` to the `data` folder
+1. Transfer `storageFormat.vpk` to the `data` folder
+1. 於您的主機按下「O」鍵以關閉 FTP 連線
+
+#### 第二節 — 安裝 VPKs
+
+1. 於您的主機中移動至 `ux0:` -> `data/`
+1. 於各個 `.vpk` 檔案上按下「□」(方形) 鍵將其選取
+1. 按下「△」(三角形) 鍵開啟選單，並選擇『More』->『Install all』以安裝所有已選取的檔案
+1. 按下「X」鍵確認安裝
+1. 當每次提示要求使用更高權限時，按下「X」繼續
+1. 按下「△」(三角形) 鍵開啟選單，並選擇『Delete』以刪除所有已選取的檔案
+1. 按下「X」鍵確認刪除
+1. 關閉 VitaShell
+
+#### 第三節 — 格式化 microSD 卡
+
+1. Insert your SD2Vita with the microSD card into your PS Vita or PS TV device
+1. Launch the storageFormat application
+1. Ensure `Target` is set to "SD2Vita" and `Filesystem` is set to "TexFAT"
+1. Press (Cross) on "Format target storage"
+ + If this fails, ensure the adapter is inserted properly and is undamaged - then reboot and try again
+ + If it still fails, follow the [StorageMgr](storagemgr) guide
+1. Press (Cross) on "Reboot your device"
+
+#### 第四節 — 安裝 yamt-vita
+
+If you previously installed StorageMgr or another storage plugin, please remove it from your `ux0:tai/` or `ur0:tai/` folder before continuing.
+{: .notice--info}
+
+1. Power on your device to reboot
+1. Launch the YAMT Installer application
+1. Press (Cross) on `-> Install the lite version`
+ + Once finished, your device will reboot
+1. Open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Enable "Use YAMT" to enable the YAMT driver
+1. Set `ux0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Set `uma0:` to "SD2Vita"
+1. Hold the power button and select "Power Off"
+
+#### 第五節 — 還原資料
+
+本節將會從您舊的 Sony 記憶卡內容複製到新的儲存裝置中。
+{: .notice--info}
+
+1. Power on your device to reboot
+1. 啟動 VitaShell
+1. Navigate to the `ux0:` partition
+ + This is currently your official memory card or internal storage
+1. Press down on the D-Pad to highlight a folder or file
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on "Mark all" to select all folders and files in the `ux0:` partition
+1. Press (Triangle) again to bring up the menu
+1. Press (Cross) on "Copy"
+1. Press (Cross) again when prompted
+1. Navigate out of the `ux0:` partition and enter the `uma0:` partition
+ + This is your unofficial storage device's memory
+1. Press (Triangle) to bring up the menu
+1. Press (Cross) on paste and wait for it to finish
+1. Once done, exit VitaShell and open the Settings application
+1. Navigate to `Devices` -> `Storage Devices`
+1. Set `ux0:` to "SD2Vita"
+1. Set `uma0:` to "Memory Card"
+ + If you're not using a memory card, select "Internal Storage"
+1. Hold the power button and select "Power Off"
+1. Power on your device to reboot
+
+___
+
+{% capture notice-1 %}
+如果您想要清理您記憶卡中的內容 (假設說您想存放 PSP 遊戲之類的)，您可將 `uma0:` (新的記憶卡掛載點) 以及/或者 `imc0:` (適用於 PS Vita 2000 或 PS TV) 中的資料刪除。
+
+If you decide to do this, you must *not* delete these folders if they exist:
+
+ + `uma0:data/bootstrap.self`
+ + `uma0:app/PCSG90096`
+ + `uma0:appmeta/PCSG90096`
+ + `uma0:appmeta/VITASHELL`
+ + `uma0:license/app/PCSG90096`
+ + `uma0:license/app/VITASHELL`
+ + `uma0:user/00/savedata/PCSG90096`
+ + `uma0:user/00/savedata/VITASHELL`
+
+這是因為 h-encore 得保持其記憶卡中的安裝狀態，這樣您才能在重啟後啟用 HENkaku (及 StorageMgr)。
+{% endcapture %}
+
+{{ notice-1 | markdownify }}