New Crowdin updates (#120)

* New translations wii-loaders.md (Portuguese, Brazilian) * New translations wii-loaders.md (Spanish, Latin America) * New translations 410.md (Hungarian) * New translations bootmiirecover.md (Hungarian) * New translations bricks.md (Hungarian) * New translations cios-mini.md (Hungarian) * New translations donations.md (Hungarian) * New translations dump-wads.md (Hungarian) * New translations gc-backups.md (Hungarian) * New translations gcsaves.md (Hungarian) * New translations modmii.md (Hungarian) * New translations recovery-mode.md (Hungarian) * New translations syscheck.md (Hungarian) * New translations themes.md (Hungarian) * New translations update.md (Hungarian) * New translations wii-backups.md (Hungarian) * New translations wii-loaders.md (Hungarian) * New translations wiigsc.md (Hungarian) * New translations wiimmfi.md (Hungarian) * New translations wnd-mini.md (Hungarian) * New translations yawmme.md (Hungarian) * New translations en_us.json (Hungarian) * New translations bluebomb.md (Hungarian) * New translations bootmii.md (Hungarian) * New translations bootmiirecover.md (Hungarian) * New translations cios-mini.md (Hungarian) * New translations cios-vwii.md (Hungarian) * New translations cios.md (Hungarian) * New translations dosanddonts.md (Hungarian) * New translations dump-games.md (Hungarian) * New translations dump-wads.md (Hungarian) * New translations flashhax.md (Hungarian) * New translations gc-backups.md (Hungarian) * New translations gcsaves.md (Hungarian) * New translations hackmii.md (Hungarian) * New translations hbc-mini.md (Hungarian) * New translations hbc.md (Hungarian) * New translations homebrew-dolphin.md (Hungarian) * New translations letterbomb.md (Hungarian) * New translations modmii.md (Hungarian) * New translations nintendont.md (Hungarian) * New translations osc.md (Hungarian) * New translations priiloader.md (Hungarian) * New translations recovery-mode.md (Hungarian) * New translations riiconnect24.md (Hungarian) * New translations riitag.md (Hungarian) * New translations riivolution.md (Hungarian) * New translations rssmii.md (Hungarian) * New translations str2hax.md (Hungarian) * New translations syscheck.md (Hungarian) * New translations themes.md (Hungarian) * New translations transfer-saves.md (Hungarian) * New translations update.md (Hungarian) * New translations usbloadergx.md (Hungarian) * New translations vwii-finalizing-setup.md (Hungarian) * New translations vwii-homebrew-channel-no-wiiu-mods.md (Hungarian) * New translations vwii-homebrew-channel.md (Hungarian) * New translations wii-backups.md (Hungarian) * New translations wii-factory-reset.md (Hungarian) * New translations wii-loaders.md (Hungarian) * New translations wiibackupmanager.md (Hungarian) * New translations wiiconnect24.md (Hungarian) * New translations wiiflow.md (Hungarian) * New translations wiigsc.md (Hungarian) * New translations wiimmfi.md (Hungarian) * New translations wiiu-nand-dumper.md (Hungarian) * New translations wilbrand.md (Hungarian) * New translations wnd-mini.md (Hungarian) * New translations 410.md (Russian) * New translations bootmiirecover.md (Russian) * New translations bricks.md (Russian) * New translations cios-mini.md (Russian) * New translations donations.md (Russian) * New translations dump-wads.md (Russian) * New translations gc-backups.md (Russian) * New translations gcsaves.md (Russian) * New translations modmii.md (Russian) * New translations recovery-mode.md (Russian) * New translations syscheck.md (Russian) * New translations themes.md (Russian) * New translations update.md (Russian) * New translations wii-backups.md (Russian) * New translations wii-loaders.md (Russian) * New translations wiigsc.md (Russian) * New translations wiimmfi.md (Russian) * New translations wnd-mini.md (Russian) * New translations yawmme.md (Russian) * New translations 410.md (Russian) * New translations bluebomb.md (Russian) * New translations cios-mini.md (Russian) * New translations cios-vwii.md (Russian) * New translations cios.md (Russian) * New translations donations.md (Russian) * New translations hackmii.md (Russian) * New translations hbc.md (Russian) * New translations letterbomb.md (Russian) * New translations privacy-policy.md (Russian) * New translations site-navigation.md (Russian) * New translations str2hax.md (Russian) * New translations wilbrand.md (Russian) * New translations en_us.json (Russian) * New translations bluebomb.md (Russian) * New translations bluebomb.md (Russian) * New translations donations.md (Russian) * New translations dosanddonts.md (Russian) * New translations dump-wads.md (Russian) * New translations hbc-mini.md (Russian) * New translations hbc.md (Russian) * New translations nintendont.md (Russian) * New translations riiconnect24.md (Russian) * New translations riitag.md (Russian) * New translations riivolution.md (Russian) * New translations rssmii.md (Russian) * New translations transfer-saves.md (Russian) * New translations usbloadergx.md (Russian) * New translations vwii-homebrew-channel-no-wiiu-mods.md (Russian) * New translations wiibackupmanager.md (Russian) * New translations wiiflow.md (Russian) * New translations yawmme.md (Russian) * New translations yawmme.md (Russian) * New translations bluebomb.md (Russian) * New translations bootmii.md (Russian) * New translations bootmii.md (Russian) * New translations bootmii.md (Russian) * New translations bluebomb.md (Russian) * New translations bootmiirecover.md (Russian) * New translations cios-mini.md (Russian) * New translations cios-vwii.md (Russian) * New translations cios.md (Russian) * New translations gc-backups.md (Russian) * New translations gcsaves.md (Russian) * New translations hackmii.md (Russian) * New translations hbc.md (Russian) * New translations letterbomb.md (Russian) * New translations modmii.md (Russian) * New translations osc.md (Russian) * New translations recovery-mode.md (Russian) * New translations str2hax.md (Russian) * New translations syscheck.md (Russian) * New translations themes.md (Russian) * New translations update.md (Russian) * New translations vwii-homebrew-channel-no-wiiu-mods.md (Russian) * New translations wii-backups.md (Russian) * New translations wii-loaders.md (Russian) * New translations wiigsc.md (Russian) * New translations wiimmfi.md (Russian) * New translations wilbrand.md (Russian) * New translations wnd-mini.md (Russian) * New translations dump-games.md (Russian) * New translations flashhax.md (Russian) * New translations homebrew-dolphin.md (Russian) * New translations priiloader.md (Russian) * New translations vwii-homebrew-channel.md (Russian) * New translations wii-factory-reset.md (Russian) * New translations wiiconnect24.md (Russian) * New translations wiiu-nand-dumper.md (Russian) * New translations str2hax.md (Russian) * New translations bootmii.md (Russian) * New translations flashhax.md (Russian) * New translations homebrew-dolphin.md (Russian) * New translations flashhax.md (Russian) * New translations priiloader.md (Russian) * New translations bricks.md (Romanian) * New translations index.md (Romanian) * New translations recommended-homebrew.md (Romanian) * New translations bricks.md (French) * New translations index.md (French) * New translations recommended-homebrew.md (French) * New translations bricks.md (Spanish) * New translations index.md (Spanish) * New translations recommended-homebrew.md (Spanish) * New translations bricks.md (Catalan) * New translations index.md (Catalan) * New translations recommended-homebrew.md (Catalan) * New translations bricks.md (German) * New translations index.md (German) * New translations recommended-homebrew.md (German) * New translations bricks.md (Hungarian) * New translations index.md (Hungarian) * New translations recommended-homebrew.md (Hungarian) * New translations bricks.md (Italian) * New translations index.md (Italian) * New translations recommended-homebrew.md (Italian) * New translations bricks.md (Japanese) * New translations index.md (Japanese) * New translations recommended-homebrew.md (Japanese) * New translations bricks.md (Korean) * New translations index.md (Korean) * New translations recommended-homebrew.md (Korean) * New translations bricks.md (Norwegian) * New translations index.md (Norwegian) * New translations recommended-homebrew.md (Norwegian) * New translations bricks.md (Polish) * New translations index.md (Polish) * New translations recommended-homebrew.md (Polish) * New translations bricks.md (Portuguese) * New translations index.md (Portuguese) * New translations recommended-homebrew.md (Portuguese) * New translations bricks.md (Russian) * New translations index.md (Russian) * New translations recommended-homebrew.md (Russian) * New translations bricks.md (Turkish) * New translations index.md (Turkish) * New translations recommended-homebrew.md (Turkish) * New translations bricks.md (Chinese Simplified) * New translations index.md (Chinese Simplified) * New translations recommended-homebrew.md (Chinese Simplified) * New translations bricks.md (Chinese Traditional) * New translations index.md (Chinese Traditional) * New translations recommended-homebrew.md (Chinese Traditional) * New translations bricks.md (Portuguese, Brazilian) * New translations index.md (Portuguese, Brazilian) * New translations recommended-homebrew.md (Portuguese, Brazilian) * New translations bricks.md (Spanish, Latin America) * New translations index.md (Spanish, Latin America) * New translations recommended-homebrew.md (Spanish, Latin America) * New translations faq.md (Romanian) * New translations faq.md (French) * New translations faq.md (Spanish) * New translations faq.md (Catalan) * New translations faq.md (German) * New translations faq.md (Hungarian) * New translations faq.md (Italian) * New translations faq.md (Japanese) * New translations faq.md (Korean) * New translations faq.md (Norwegian) * New translations faq.md (Polish) * New translations faq.md (Portuguese) * New translations faq.md (Russian) * New translations faq.md (Turkish) * New translations faq.md (Chinese Simplified) * New translations faq.md (Chinese Traditional) * New translations faq.md (Portuguese, Brazilian) * New translations faq.md (Spanish, Latin America) * New translations bluebomb.md (Russian) * New translations cios-mini.md (Russian) * New translations cios.md (Russian) * New translations letterbomb.md (Russian) * New translations str2hax.md (Russian) * New translations update.md (Russian) * New translations wilbrand.md (Russian) * New translations dump-games.md (Russian) * New translations priiloader.md (Russian) * New translations bluebomb.md (Russian) * New translations hackmii.md (Russian) * New translations letterbomb.md (Russian) * New translations str2hax.md (Russian) * New translations wilbrand.md (Russian) * New translations flashhax.md (Russian) * New translations en_us.json (Russian)
2024-11-26 19:00:27 +00:00 · 2024-11-20 15:05:59 -06:00 · 2024-11-20 15:05:59 -06:00 · f706a49b6a
commit f706a49b6a
parent 6dba196750
547 changed files with 3296 additions and 3307 deletions
--- a/docs/.vitepress/i18n/strings/hu_HU.json
+++ b/docs/.vitepress/i18n/strings/hu_HU.json
@ -1,15 +1,15 @@
 {
-    "language": "English",
+    "language": "Magyar",
    "title": "Wii Hack útmutató",
-    "description": "The complete guide to modding your Wii, vWii, and Wii mini",
-    "langMenuLabel": "Switch language",
-    "darkModeSwitchLabel": "Appearance",
-    "darkModeSwitchTitle": "Switch to dark theme",
-    "lightModeSwitchTitle": "Switch to light theme",
-    "sidebarMenuLabel": "Menu",
-    "returnToTopLabel": "Return to top",
-    "guide": "Guide",
-    "other": "Other",
+    "description": "A teljes útmutató a Wii, vWii és Wii mini moddingjához",
+    "langMenuLabel": "Nyelvváltás",
+    "darkModeSwitchLabel": "Megjelenés",
+    "darkModeSwitchTitle": "Váltás sötét témára",
+    "lightModeSwitchTitle": "Váltás világos témára",
+    "sidebarMenuLabel": "Menü",
+    "returnToTopLabel": "Vissza a tetejére",
+    "guide": "Útmutató",
+    "other": "Egyéb",
    "pages": {
        "bootmii": "BootMii biztonsági mentés",
        "cios": "cIOS-ek telepítése",
--- a/docs/.vitepress/i18n/strings/ru_RU.json
+++ b/docs/.vitepress/i18n/strings/ru_RU.json
@ -1,40 +1,40 @@
 {
-    "language": "English",
+    "language": "Русский",
    "title": "Wii Guide",
-    "description": "The complete guide to modding your Wii, vWii, and Wii mini",
-    "langMenuLabel": "Switch language",
-    "darkModeSwitchLabel": "Appearance",
-    "darkModeSwitchTitle": "Switch to dark theme",
-    "lightModeSwitchTitle": "Switch to light theme",
-    "sidebarMenuLabel": "Menu",
-    "returnToTopLabel": "Return to top",
-    "guide": "Guide",
-    "other": "Other",
+    "description": "Полное руководство по моддингу вашей Wii, vWii или Wii mini",
+    "langMenuLabel": "Сменить язык",
+    "darkModeSwitchLabel": "Внешний вид",
+    "darkModeSwitchTitle": "Переключиться на темную тему",
+    "lightModeSwitchTitle": "Переключиться на светлую тему",
+    "sidebarMenuLabel": "Меню",
+    "returnToTopLabel": "Вернуться вверх",
+    "guide": "Руководство",
+    "other": "Прочее",
    "pages": {
        "bootmii": "Резервная копия через BootMii",
        "cios": "cIOS",
        "cios-mini": "d2xl cIOS для Wii mini (экспериментальная функция)",
-        "cios-vwii": "d2x cIOS for vWii",
-        "donations": "Сделать пожертвование",
-        "faq": "ЧаВо",
+        "cios-vwii": "d2x cIOS для vWii",
+        "donations": "Пожертвования",
+        "faq": "ЧАВО",
        "flashhax": "FlashHax",
-        "get-started": "Начинайте здесь",
-        "hbc": "Установка канала Homebrew и BootMii",
-        "hbc-mini": "Канал Homebrew - только для Wii mini",
+        "get-started": "Начать",
+        "hbc": "Установка Homebrew Channel и BootMii",
+        "hbc-mini": "Homebrew Channel - только для Wii mini",
        "letterbomb": "LetterBomb",
        "multiple-options": "Несколько опций",
        "osc": "Open Shop Channel",
        "priiloader": "Priiloader",
        "privacy-policy": "Политика конфиденциальности",
-        "recommended-homebrew": "Рекомендуемое Homebrew",
+        "recommended-homebrew": "Рекомендуемые Homebrew",
        "site-navigation": "Навигация по сайту",
-        "vwii-finalizing-setup": "Finalizing Setup",
-        "vwii-homebrew-channel": "vWii Modding Guide",
-        "vwii-homebrew-channel-no-wiiu-mods": "Installing the Homebrew Channel",
+        "vwii-finalizing-setup": "Заключение",
+        "vwii-homebrew-channel": "Руководство по моддингу vWii",
+        "vwii-homebrew-channel-no-wiiu-mods": "Установка Homebrew Channel",
        "wiiconnect24": "WiiConnect24",
        "wiimmfi": "Wiimmfi",
-        "wiiu-nand-dumper": "vWii Modding Guide",
+        "wiiu-nand-dumper": "Руководство по моддингу vWii",
        "wilbrand": "Wilbrand",
-        "wnd-mini": "Wii mini NAND dumper"
+        "wnd-mini": "Дампер NAND для Wii mini"
    }
 }
--- a/docs/.vitepress/i18n/strings/tr_TR.json
+++ b/docs/.vitepress/i18n/strings/tr_TR.json
@ -27,7 +27,7 @@
        "priiloader": "Priiloader",
        "privacy-policy": "Gizlilik Politikası",
        "recommended-homebrew": "Recommended Homebrew",
-        "site-navigation": "Site Navigasyonu",
+        "site-navigation": "Site Haritası",
        "vwii-finalizing-setup": "Finalizing Setup",
        "vwii-homebrew-channel": "vWii Modding Guide",
        "vwii-homebrew-channel-no-wiiu-mods": "Installing the Homebrew Channel",
--- a/docs/.vitepress/i18n/strings/zh_CN.json
+++ b/docs/.vitepress/i18n/strings/zh_CN.json
@ -1,40 +1,40 @@
 {
-    "language": "English",
+    "language": "中文",
    "title": "Wii 指南",
-    "description": "The complete guide to modding your Wii, vWii, and Wii mini",
-    "langMenuLabel": "Switch language",
-    "darkModeSwitchLabel": "Appearance",
-    "darkModeSwitchTitle": "Switch to dark theme",
-    "lightModeSwitchTitle": "Switch to light theme",
-    "sidebarMenuLabel": "Menu",
-    "returnToTopLabel": "Return to top",
-    "guide": "Guide",
-    "other": "Other",
+    "description": "破解任天堂 Wii、vWii 和 Wii mini 的完整指南。",
+    "langMenuLabel": "切换语言",
+    "darkModeSwitchLabel": "外观",
+    "darkModeSwitchTitle": "切换到暗色主题",
+    "lightModeSwitchTitle": "切换到亮色主题",
+    "sidebarMenuLabel": "菜单",
+    "returnToTopLabel": "返回顶部",
+    "guide": "指南",
+    "other": "其他",
    "pages": {
        "bootmii": "BootMii 备份",
        "cios": "cIOS",
        "cios-mini": "供Wii mini安装的d2xl cIOS （实验性功能）",
-        "cios-vwii": "d2x cIOS for vWii",
+        "cios-vwii": "给 vWii 使用的 d2x cIOS",
        "donations": "捐赠",
        "faq": "常见问题指南",
-        "flashhax": "RiiConnect24",
+        "flashhax": "FlashHax",
        "get-started": "开始",
        "hbc": "安装Homebrew Channel和BootMii",
-        "hbc-mini": "Homebrew Channel - 仅适用于 Wii mini",
-        "letterbomb": "捐赠",
+        "hbc-mini": "Homebrew 频道 - 仅适用于 Wii mini",
+        "letterbomb": "LetterBomb",
        "multiple-options": "多选项",
-        "osc": "Open Shop Channel",
+        "osc": "打开商店频道",
        "priiloader": "Priiloader",
-        "privacy-policy": "捐赠",
-        "recommended-homebrew": "Recommended Homebrew",
+        "privacy-policy": "隐私协议",
+        "recommended-homebrew": "推荐自制程序",
        "site-navigation": "网站导航",
-        "vwii-finalizing-setup": "Finalizing Setup",
-        "vwii-homebrew-channel": "vWii Modding Guide",
-        "vwii-homebrew-channel-no-wiiu-mods": "Installing the Homebrew Channel",
+        "vwii-finalizing-setup": "正在完成设置",
+        "vwii-homebrew-channel": "vWii 破解指南",
+        "vwii-homebrew-channel-no-wiiu-mods": "安装 Homebrew 频道",
        "wiiconnect24": "WiiConnect24",
        "wiimmfi": "Wiimmfi",
-        "wiiu-nand-dumper": "vWii Modding Guide",
+        "wiiu-nand-dumper": "vWii 破解指南",
        "wilbrand": "Wilbrand",
-        "wnd-mini": "Wii mini NAND dumper"
+        "wnd-mini": "Wii mini NAND 转储器"
    }
 }
--- a/docs/ca_ES/bluebomb.md
+++ b/docs/ca_ES/bluebomb.md
@ -2,7 +2,7 @@
 outline: false
 ---

-# Credits
+# BlueBomb

 ::::: tabs

@ -42,7 +42,7 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### str2hax Method
+### Requirements

 - A Linux machine
  - A Virtual Machine may work, but it is not recommended due to its complexity in getting Bluetooth passthrough working. If possible, please use a LiveUSB as described below.
@ -69,7 +69,7 @@ Make sure that the console is close to the computer running the exploit, ideally
   - For a Wii mini, the USB port is on the back.
   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Launch the Homebrew Channel on your Wii.
+3. Power on your console.

 4. Go to `Wii Settings`.

@ -79,7 +79,7 @@ Make sure that the console is close to the computer running the exploit, ideally

   ![](/images/wii/SystemMenuVersion.png)

-6. Download the Priiloader installer and LoadPriiloader apps.
+6. Power off your console.

 7. Start your Linux distro, and ensure you are connected to the internet.

@ -97,7 +97,7 @@ Make sure that the console is close to the computer running the exploit, ideally
    - If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (`U` for **USA** and `E` for **PAL** models).
    - If you have selected a Wii you will be asked to provide your Wii Menu Version (What you determined in step 4)

-11. Launch the Homebrew Channel on your Wii.
+11. Power on your console.
    - **Do not** connect any Wii Remotes.

 12. Press the Sync button repeatedly until the terminal shows `got connection handle`.
@ -154,7 +154,7 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### str2hax Method
+### Requirements

 - A Rasperry Pi Pico W or an ESP32 with BR/EDR (Classic) support.
 - A USB flash drive formatted as FAT32.
@ -176,7 +176,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit
   - For a Wii mini, the USB port is on the back.
   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Launch the Homebrew Channel on your Wii.
+3. Power on your console.

 4. Go to `Wii Settings`.

@ -186,7 +186,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

   ![](/images/wii/SystemMenuVersion.png)

-6. Download the Priiloader installer and LoadPriiloader apps.
+6. Power off your console.

 #### Rasperry Pi Pico W

@ -205,7 +205,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit
 ### Performing the Exploit

 1. Plug your flashed device back into your PC.
-2. Launch the Homebrew Channel on your Wii.
+2. Power on your console.
   - **Do not** connect any Wii Remotes.
 3. Press the Sync button repeatedly until the bluebomb screen shows up.
   - This could take numerous attempts.
--- a/docs/ca_ES/bricks.md
+++ b/docs/ca_ES/bricks.md
@ -16,7 +16,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Do NOT attempt region changing methods meant for Wii on the vWii or Wii mini**
 - **Do NOT use a Nintendo Wi-Fi Connection service unless it is known to be RCE patched (such as [Wiimmfi](wiimmfi)). Doing otherwise could allow a malicious actor to BRICK your Console!**
 - **Only install updates for your own region!**.
-  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
+  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
 - **Do NOT delete or modify system files, install old versions of your Wii Menu or IOS, and do NOT install any system file mods unless you know what you are doing!**
  - An example of modifying files going wrong is replacing IOS80 on Wii mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick).
 - **Do NOT install homebrew from untrustworthy sources or if the source code is not available.**
@ -26,7 +26,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Ensure that you know what you are doing when running homebrew apps - especially those with the ability to modify system files. Be ESPECIALLY careful when using applications such as:**
  - AnyTitle Deleter
  - AnyRegion Changer
-  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick)
+  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick)
  - Firmware Downgraders
  - Any other app that modifies critical NAND files
 - **DO NOT TOUCH THE WII'S POWER SOURCE OR POWER BUTTONS WHEN INSTALLING OR MODIFYING CRITICAL SYSTEM CONTENT**.
@ -53,7 +53,7 @@ This is a section intended to help you diagnose a potential brick, in order by l
  - If this randomly started happening, and you can access Maintenance Mode by holding +/- on the health/warning screen, see [mail brick](bricks#mail-brick).
 - Wii starts, and you see the health/warning screen, but upon pressing A to start, the screen goes black and/or freezes and does not continue. Maintenance mode is accessible. See [mail brick](bricks#mail-brick).
 - Wii starts, BUT you INSTANTLY see an error that resembles the Opera web browser. See [Wii Menu/Opera brick](bricks#wii-menuopera-brick).
- Error 003. See [Korean Kii/Error 003 brick](bricks#error-003-brick).
+- Error 003. See [Korean Kii/Error 003 brick](bricks#koreankii-error-003-brick).
 - Nothing happens, black screen, BUT BootMii as boot2 is accessible. See [IOS brick](bricks#ios-brick).
 - Nothing happens, black screen, BUT Wii can be turned on with a Wiimote/Recovery Mode can be accessed. See [Wi-Fi brick](bricks#wi-fi-brick).
 - Nothing happens, black screen. Wii cannot be turned on with a Wiimote, Recovery Mode cannot be started, and BootMii as boot2 is not accessible. See [low-level brick](bricks#low-level-brick).
@ -166,7 +166,7 @@ Alternatively, [Recovery Mode](recovery-mode) can be used to attempt a fix.

 ### Symptoms

-This brick occurs when boot1/boot2 is corrupt.
+Screen shows up as listed below on normal boot.

 ```
 Error:003
--- a/docs/ca_ES/faq.md
+++ b/docs/ca_ES/faq.md
@ -42,7 +42,7 @@ If you get error FORE000006, your Wii's clock is probably set incorrectly. See [

 ### How can I remove parental controls?

-The [mkey generator](https://mkey.eiphax.tech/) can generate the code required to remove parental controls.
+The [mkey generator](https://mkey.nintendohomebrew.com/) can generate the code required to remove parental controls.

 ### I got error code XXXXXX, how to fix it?

--- a/docs/ca_ES/index.md
+++ b/docs/ca_ES/index.md
@ -55,7 +55,7 @@ This guide aims to do the following, including optional sections:
 - **This guide applies to retail/consumer Wiis ONLY!** This means that development units are not covered.
 - Depending on what you intend to do with your modded Wii, you may have to make some modifications to the system memory that have a risk of bricking (rendering the console inoperable). As long as you follow this guide exactly, you should be fine, but for general brick prevention tips see [this](bricks#brick-prevention) page.
 - The differences between the Wii and Wii mini are quite significant. This means that in some cases, something that is normally harmless to the Wii could cause a [severe brick](bricks#wi-fi-brick) to the Wii mini. Tread carefully if you are planning to mod one!
- Be extremely careful when modifying a [Korean Wii](bricks#korean-kiierror-003-brick).
+- Be extremely careful when modifying a [Korean Wii](bricks#koreankii-error-003-brick).

 ## Ready?

--- a/docs/ca_ES/modmii.md
+++ b/docs/ca_ES/modmii.md
@ -71,7 +71,7 @@ When using ModMii, it is important to note that it will generate a custom guide

 ## Installing ModMii

-### str2hax Method
+### Requirements

 - A Wii
 - A USB drive or SD Card
--- a/docs/ca_ES/recommended-homebrew.md
+++ b/docs/ca_ES/recommended-homebrew.md
@ -9,7 +9,7 @@ Homebrew that has the ability to make permanant changes to your Wii are highligh
 - [**YAWM ModMii Edition**](https://oscwii.org/library/app/yawmME) - An extensively supported WAD manager with additional features. Recommended over any other WAD manager due to its extensive anti-brick protection.
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME) - A homebrew application which checks information about your Wii and pastes it back in a readable, sendable format. Think of it like a "System Information" app but for the Wii.
 - [**CDBackup**](https://oscwii.org/library/app/cdbackup) - Backup, restore, and delete Wii Message Board data.
- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) so **only use this app if you know what you are doing**.
+- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#koreankii-error-003-brick) so **only use this app if you know what you are doing**.
 - [**WiiXplorer-SS**](https://oscwii.org/library/app/wiixplorer-ss) - A modified and updated version of WiiXplorer. A file manager for the Wii, it allows you to view and customize files both on an SD card, a USB device, and the internal Wii memory. For this reason it is a very powerful but also dangerous tool - don't modify files on the system NAND unless you know what you are doing, as it can lead to various types of [bricks](bricks).
 - [**SaveGame Manager GX**](https://oscwii.org/library/app/SaveGame_Manager_GX) - A savegame/Mii extractor for the Wii. It supports GameCube memory cards (physical and virtual), emuNANDs, normal and protected saves, themes, and more.
 - [**csm-installer**](https://oscwii.org/library/app/csm-installer) - An application that allows you to theme the Wii Menu. While quite useful to make your Wii unique, it also has the ability to cause a [minor brick](bricks#theme-brick), so make sure to read our [theme guide](themes) for safe usage instructions.
--- a/docs/ca_ES/themes.md
+++ b/docs/ca_ES/themes.md
@ -52,7 +52,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::: tabs

-:::: tab csm-installer
+:::: tab (All) Via csm-installer

 1. Extract the csm-installer `.zip` file to the root of your SD card or USB device.
 2. Insert your SD card or USB device into your console, and launch the Homebrew Channel.
@ -62,7 +62,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-wii
+:::: tab (Wii) Via NUS Downloader

 1. On your computer, download [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
 2. Copy all files from the NUS Downloader `.zip` to a folder on your computer.
@ -79,7 +79,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-vwii
+:::: tab (vWii) Via NUS Downloader

 1. On your computer, download [NUS Downloader (vWii)](/assets/files/NUSDownloader-vwii.zip)
 2. Copy all files from the vWii NUS Downloader `.zip` to a folder on your computer.
@ -110,7 +110,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab thememii
+:::: tab (Wii) Via ThemeMii

 1. Create a `themes` folder on the root of your SD card/USB device.
 2. Extract the ThemeMii MOD `.zip` to a location on your PC.
--- a/docs/ca_ES/wii-backups.md
+++ b/docs/ca_ES/wii-backups.md
@ -66,7 +66,7 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Manager

-### str2hax Method
+### Requirements

 - A PC running Windows
 - A USB drive or SD card
@ -102,7 +102,7 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Fusion

-### str2hax Method
+### Requirements

 - A PC running MacOS or Linux
 - A USB drive or SD card
--- a/docs/ca_ES/wii-loaders.md
+++ b/docs/ca_ES/wii-loaders.md
@ -109,7 +109,7 @@ When you bring the cursor to the bottom of the screen while in flow view, there

 - A modded Wii
 - The latest version of [cIOS](cios)
- [USB Loader GX](https://oscwii.org/library/app/usbloader_gx)
+- [USB Loader GX](https://github.com/wiidev/usbloadergx/releases)

 ### Installation

--- a/docs/de_DE/bluebomb.md
+++ b/docs/de_DE/bluebomb.md
@ -2,7 +2,7 @@
 outline: false
 ---

-# Credits
+# BlueBomb

 ::::: tabs

@ -12,8 +12,7 @@ outline: false

 :::details Technical Details (optional)

-BlueBomb ist ein Exploit, welcher eine Lücke in der Bluetooth-Programmbibliothek der Wii und Wii mini ausnutzt. {% capture technical_info %}<summary line-breaks-before="1" mark="crwd-mark"><em>Technical Details (optional)</em></summary>
-BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries.
+BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries. Although it is the only exploit that works for the Wii mini, BlueBomb can run on the original Wii as well.

 This exploit also enables recovery from certain bricks, such as banner bricks and (some) theme bricks.

@ -43,24 +42,24 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### Anforderungen
+### Requirements

- Ein Linux-System
-  - Eine virtuelle Maschine kann funktionieren, wird aber aufgrund ihrer Komplexität beim Durchlaufen von Bluetooth nicht empfohlen. Wenn möglich, verwende bitte einen LiveUSB wie unten beschrieben.
-  - Wenn du einen Raspberry Pi hast, kannst du den auch verwenden, da wahrscheinlich Linux dort schon installiert ist.
+- A Linux machine
+  - A Virtual Machine may work, but it is not recommended due to its complexity in getting Bluetooth passthrough working. If possible, please use a LiveUSB as described below.
+  - If you have a Raspberry Pi, you can use that instead as it most likely has Linux installed already.
  - Windows Subsystem for Linux or a Chromebook running Linux mode will _not work_ as they don't have direct access to the Bluetooth adapter or USB ports.
  - If you do not have Linux, [Ubuntu](https://ubuntu.com/download/desktop) is the most user-friendly option and can be ran on computers running Windows or Mac.
    - 32-bit devices will require [Ubuntu 16.04](http://releases.ubuntu.com/16.04/).
    - For 64-bit devices it is recommended to use the LTS edition due to its stability, but the latest release works as well.
  - You can [flash a Linux Live environment to a USB flash drive](https://ubuntu.com/tutorials/tutorial-create-a-usb-stick-on-windows#1-overview) instead of installing it to your computer.
- Ein Bluetooth-Adapter.
-  - Ein interner Bluetooth-Adapter wird funktionieren.
+- A Bluetooth adapter.
+  - An internal Bluetooth adapter will work.
  - If you do not have one, make sure to get one compatible with Linux.
- Ein USB-Stick, der mit FAT32 formatiert ist.
+- A USB flash drive formatted as FAT32.
  - This cannot be the same flash drive used for your Linux Machine.
 - [HackMii Installer v1.2](https://bootmii.org/download/)

-### Anleitung
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
@ -68,9 +67,9 @@ Make sure that the console is close to the computer running the exploit, ideally

 2. Reinsert your flash drive into your console.
   - For a Wii mini, the USB port is on the back.
-   - For a normal Wii, use the bottom port. (or the right port if it's upright).
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Schalte deine Konsole ein.
+3. Power on your console.

 4. Go to `Wii Settings`.

@ -80,7 +79,7 @@ Make sure that the console is close to the computer running the exploit, ideally

   ![](/images/wii/SystemMenuVersion.png)

-6. Power off your Wii.
+6. Power off your console.

 7. Start your Linux distro, and ensure you are connected to the internet.

@ -98,14 +97,14 @@ Make sure that the console is close to the computer running the exploit, ideally
    - If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (`U` for **USA** and `E` for **PAL** models).
    - If you have selected a Wii you will be asked to provide your Wii Menu Version (What you determined in step 4)

-11. Schalte deine Konsole ein.
+11. Power on your console.
    - **Do not** connect any Wii Remotes.

 12. Press the Sync button repeatedly until the terminal shows `got connection handle`.
    - This could take numerous attempts.

-13. It'll then proceed to download and load the HackMii Installer.
-    - You can now shut down your Linux computer if you are not planning to use it later.
+13. If the exploit was successful, your device will have loaded the HackMii Installer.
+    - If you are not planning to use it later, you can now shut down your Linux distro.

 ::: info

@ -155,10 +154,10 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### Anforderungen
+### Requirements

 - A Rasperry Pi Pico W or an ESP32 with BR/EDR (Classic) support.
- Ein USB-Stick, der mit FAT32 formatiert ist.
+- A USB flash drive formatted as FAT32.
 - [The HackMii Installer](https://bootmii.org/download/)

 ::: info
@ -167,7 +166,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

 :::

-### Anleitung
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
@ -175,9 +174,9 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

 2. Reinsert your flash drive into your console.
   - For a Wii mini, the USB port is on the back.
-   - For a normal Wii, use the bottom port. (or the right port if it's upright).
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Schalte deine Konsole ein.
+3. Power on your console.

 4. Go to `Wii Settings`.

@ -187,7 +186,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

   ![](/images/wii/SystemMenuVersion.png)

-6. Power off your Wii.
+6. Power off your console.

 #### Rasperry Pi Pico W

@ -206,11 +205,11 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit
 ### Performing the Exploit

 1. Plug your flashed device back into your PC.
-2. Schalte deine Konsole ein.
+2. Power on your console.
   - **Do not** connect any Wii Remotes.
 3. Press the Sync button repeatedly until the bluebomb screen shows up.
   - This could take numerous attempts.
-4. It'll then proceed to download and load the HackMii Installer.
+4. If the exploit was successful, your device will have loaded the HackMii Installer.

 ::: tip

--- a/docs/de_DE/bootmii.md
+++ b/docs/de_DE/bootmii.md
@ -9,11 +9,11 @@ You need an **SD card** to use BootMii at all, but especially to create a NAND b

 :::

-## Anforderungen
+## Requirements

 - An SD card with at least 512MB of free space

-## Anleitung
+## Instructions

 ::: info

--- a/docs/de_DE/bootmiirecover.md
+++ b/docs/de_DE/bootmiirecover.md
@ -26,7 +26,7 @@ DO NOT restore an unverified NAND backup, or one that is not from your Wii: this

 :::

-## Anforderungen
+## Requirements

 - An earlier NAND Backup made by [BootMii](bootmii)

@ -46,7 +46,7 @@ If you want to restore a game's save data, use Dolphin to import your NAND backu

 - You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. To navigate with a GameCube controller, click left/right on the +Control Pad on a GameCube controller. To select, press A.

-## Anleitung
+## Instructions

 1. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/de_DE/bricks.md
+++ b/docs/de_DE/bricks.md
@ -1,6 +1,6 @@
 # Bricks

-A "Brick" usually means your Wii has reached a state where, its only use is that of a literal <a href="https://wikipedia.org/wiki/Brick">brick</a>.
+A "Brick" usually means your Wii has reached a state where its next purpose in existence is likely that of a doorstop, or a display figure.

 Bricks can occur for a variety of reasons, however usually it results through corrupted software, or from improper modifications made through homebrew.

@ -16,7 +16,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Do NOT attempt region changing methods meant for Wii on the vWii or Wii mini**
 - **Do NOT use a Nintendo Wi-Fi Connection service unless it is known to be RCE patched (such as [Wiimmfi](wiimmfi)). Doing otherwise could allow a malicious actor to BRICK your Console!**
 - **Only install updates for your own region!**.
-  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
+  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
 - **Do NOT delete or modify system files, install old versions of your Wii Menu or IOS, and do NOT install any system file mods unless you know what you are doing!**
  - An example of modifying files going wrong is replacing IOS80 on Wii mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick).
 - **Do NOT install homebrew from untrustworthy sources or if the source code is not available.**
@ -26,7 +26,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Ensure that you know what you are doing when running homebrew apps - especially those with the ability to modify system files. Be ESPECIALLY careful when using applications such as:**
  - AnyTitle Deleter
  - AnyRegion Changer
-  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick)
+  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick)
  - Firmware Downgraders
  - Any other app that modifies critical NAND files
 - **DO NOT TOUCH THE WII'S POWER SOURCE OR POWER BUTTONS WHEN INSTALLING OR MODIFYING CRITICAL SYSTEM CONTENT**.
@ -43,8 +43,8 @@ In any case, you should absolutely:

 This is a section intended to help you diagnose a potential brick, in order by least to most brick severity. If you seem to have a brick that isn't covered in this section or in the guide, please join the Nintendo Homebrew discord server for support.

- Wii menu brick Wii menu brick No app is malfunctioning, Wii settings is error free, everything is seemingly fine. No brick.
- Wii menu brick
+- Wii starts, and progresses to the Wii Menu. No app is malfunctioning, Wii settings is error free, everything is seemingly fine. No brick.
+- Wii starts, and progresses to the Wii Menu.
  - If after acccessing a specific channel, you get `The system files are corrupted.`, see [banner brick](bricks#banner-brick).
  - If after accessing the Wii settings, you see an error that resembles the Opera web browser, see [semibrick](bricks#semibrick).
 - Wii starts, you see the health/warning screen, but upon pressing A to start, you see a black screen.
@ -53,7 +53,7 @@ This is a section intended to help you diagnose a potential brick, in order by l
  - If this randomly started happening, and you can access Maintenance Mode by holding +/- on the health/warning screen, see [mail brick](bricks#mail-brick).
 - Wii starts, and you see the health/warning screen, but upon pressing A to start, the screen goes black and/or freezes and does not continue. Maintenance mode is accessible. See [mail brick](bricks#mail-brick).
 - Wii starts, BUT you INSTANTLY see an error that resembles the Opera web browser. See [Wii Menu/Opera brick](bricks#wii-menuopera-brick).
- Error 003 See [Korean Kii/Error 003 brick](bricks#error-003-brick).
+- Error 003. See [Korean Kii/Error 003 brick](bricks#koreankii-error-003-brick).
 - Nothing happens, black screen, BUT BootMii as boot2 is accessible. See [IOS brick](bricks#ios-brick).
 - Nothing happens, black screen, BUT Wii can be turned on with a Wiimote/Recovery Mode can be accessed. See [Wi-Fi brick](bricks#wi-fi-brick).
 - Nothing happens, black screen. Wii cannot be turned on with a Wiimote, Recovery Mode cannot be started, and BootMii as boot2 is not accessible. See [low-level brick](bricks#low-level-brick).
@ -106,9 +106,9 @@ Banner bricks occur if you install a WAD file that has an invalid Wii Menu banne

 If you are somehow able to still access the Wii Menu, go into the Homebrew Channel and use [YAWM ModMii Edition](yawmme) or your current WAD manager to uninstall the corrupt channel.

-If you cannot access the Wii Menu, and have [Priiloader](priiloader) installed, enter it by holding RESET while turning your Wii on. Select Homebrew Channel, then use your WAD manager to uninstall the faulty WAD.
+If you cannot access the Wii Menu, and have [Priiloader](priiloader) installed, enter it by holding RESET while turning your Wii on. Select Homebrew Channel, then uninstall the corrupt channel.

-If you don't have Priiloader, Maintenance mode may be worth a try. Hold down `+` and `-` on the Health and Safety screen (do not press `A`!).
+If you don't have or can't access Priiloader, Maintenance mode may be worth a try. Hold down `+` and `-` on the Health and Safety screen (do not press `A`!).

 ## Theme brick

@ -122,7 +122,7 @@ A theme brick occurs when a wrongly formatted theme is installed.

 ### Solutions

-Alternatively, go into <a href="yawmme">YAWM ModMii Edition</a> and install the CORRECT default Wii Menu WAD for your region and version. Alternatively, go into [YAWM ModMii Edition](yawmme) and install the CORRECT default Wii Menu WAD for your region and version.
+To resolve this issue, open HBC through Priiloader or BootMii as boot2 and access csm-installer to install a default theme such as the base Wii Menu theme. Alternatively, go into [YAWM ModMii Edition](yawmme) and install the CORRECT default Wii Menu WAD for your region and version.

 ## Mail brick

@ -132,7 +132,7 @@ Attempt to start the Wii - warning/press A screen shows up, and when A is presse

 ### Cause

-A mail brick happens when your Wii has a lot of mail. This will make the Wii crash.
+A mail brick occurs when a Wii has too much mail to handle, or when malformed mail is in the Wii Message Board, causing a crash upon booting through normal means. Because the Wii Message Board is always drawn below Wii channels, this causes the Wii Menu to fail before fully loading.

 ### Solution

@ -140,7 +140,7 @@ By entering holding + and - on the warning screen, maintenance mode can be enter

 From here, the Homebrew Channel can be loaded and the brick can be fixed by deleting Wii Message Board data with [cdbackup](https://oscwii.org/library/app/cdbackup).

-## Wii Menu brick
+## Wii Menu/Opera brick

 ### Symptoms

@ -177,7 +177,7 @@ unauthorized device has been detected.

 ### Cause

-When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is <strong x-id="1">not</strong> Korean.
+When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. If this check succeeds, the error triggers and the Wii is effectively bricked.

 This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii.

@ -214,19 +214,19 @@ For vWii, See [Recover a vWii IOS/Channel](https://wiiu.hacks.guide/#/recover-vw

 ### Symptoms

-The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery Menu. It's only accessible if you take apart a GameCube controller to hold all 4 +Control Pad buttons down while the GameCube controller's plugged into the 4th slot on your Wii as it's turned on.
+This brick appears identical to a low-level brick, however you can still power on the Wii with a Wiimote, and you can still boot into Recovery Mode on an original revision Wii.

 ### Cause

 This brick arises when your Wii's Wi-Fi (or Bluetooth) module is damaged or not inserted properly. In such cases, the Wii gets stuck on a black screen while awaiting a response from IOS.

-This will also happen on the Wii Mini if you install a normal Wii IOS, because the Wii Mini doesn't have a Wi-Fi module.
+This will also happen on the Wii mini if you install a normal Wii IOS, because the Wii mini doesn't have a Wi-Fi module.

 ### Solutions

 To resolve this problem, you can try to reseat or replace the Wi-Fi/Bluetooth module.

-If you are on a Wii Mini, you must install a Wi-Fi module.
+If you are on a Wii mini, you must install a Wi-Fi module.

 If both fail, see [low-level brick](bricks#low-level-brick).

@ -238,7 +238,7 @@ Completely black screen, no response to user input. Recovery Mode cannot be boot

 ### Cause

-This brick occurs when boot1/boot2 is corrupt.
+This brick occurs when boot1/boot2 is corrupt, or if there is a hardware failure.

 ### Solutions

--- a/docs/de_DE/cios-mini.md
+++ b/docs/de_DE/cios-mini.md
@ -28,13 +28,13 @@ Do not attempt to install a Wii/vWii IOS or System Menu on the Wii mini. Doing s

 :::

-## Anforderungen
+## Requirements

 - Eine Wii mini, auf welcher der Homebrew-Kanal installiert ist
 - A USB drive.
 - Leseratte's [d2xl cIOS Installer](/assets/files/d2xl_wii_mini_cIOS_installer_v1_beta2.zip)

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Herunterladen

--- a/docs/de_DE/cios-vwii.md
+++ b/docs/de_DE/cios-vwii.md
@ -22,7 +22,7 @@ Do not attempt to install a Wii/Wii mini IOS or System Menu on the vWii. Doing s

 :::

-## Anforderungen
+## Requirements

 - A Wii U with the Homebrew Channel installed on the vWii
 - Eine SD-Karte
@ -34,7 +34,7 @@ Ensure that if you are using an SD card, the lock switch is in the unlocked posi

 :::

-## Anleitung
+## Instructions

 ### Section I - Installing

--- a/docs/de_DE/cios.md
+++ b/docs/de_DE/cios.md
@ -6,7 +6,7 @@ cIOS (Custom IOS) are IOS that are patched to allow custom functionality. While

 :::

-## Anforderungen
+## Requirements

 ::: warning

@ -22,7 +22,7 @@ If you have a Wii mini, follow [this guide](cios-mini) instead.
 - Eine SD-Karte oder ein USB-Laufwerk
 - [d2x cIOS Installer](/assets/files/d2x-cios-installer.zip)

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Herunterladen

--- a/docs/de_DE/dump-games.md
+++ b/docs/de_DE/dump-games.md
@ -4,7 +4,7 @@ This guide covers dumping GameCube or Wii game discs to a local SD card or USB d

 ## Dumping a Disc to SD/USB (CleanRip)

-### Anforderungen
+### Requirements

 - An SD card or USB drive with at least 4.7 GB of free space (8.5 GB if dumping a dual layer disc).
 - [CleanRip](https://oscwii.org/library/app/cleanrip)
--- a/docs/de_DE/dump-wads.md
+++ b/docs/de_DE/dump-wads.md
@ -2,12 +2,12 @@

 This tutorial will explain you how to dump WADs from your Wii System Memory.

-## Anforderungen
+## Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [Yet Another BlueDump MOD](https://oscwii.org/library/app/Yet-Another-BlueDump-Mod)

-## Anleitung
+## Instructions

 1. Power off your Wii.

--- a/docs/de_DE/faq.md
+++ b/docs/de_DE/faq.md
@ -42,7 +42,7 @@ If you get error FORE000006, your Wii's clock is probably set incorrectly. See [

 ### Wie entferne ich eine Kindersicherung?

-The [mkey generator](https://mkey.eiphax.tech/) can generate the code required to remove parental controls.
+The [mkey generator](https://mkey.nintendohomebrew.com/) can generate the code required to remove parental controls.

 ### I think my Wii is bricked, or something is seriously wrong, what do I do?

--- a/docs/de_DE/flashhax.md
+++ b/docs/de_DE/flashhax.md
@ -2,12 +2,12 @@

 FlashHax is an exploit for the Wii that is triggered by using the Internet Channel. Unlike other exploits, this doesn't require an SD card.

-## Anforderungen
+## Requirements

 - Eine Wii mit Internetverbindung
 - The Internet Channel

-## Anleitung
+## Instructions

 ### Section I - Prep Work

@ -39,7 +39,7 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann

   ![](/images/exploits/flashhax/wait-for-download.png)

-3. It'll then proceed to download and load the HackMii Installer.
+3. If the exploit was successful, your device will have loaded the HackMii Installer.
   - This may take multiple tries.
   - If the HackMii Installer doesn't load and it instead freezes (you can't move your cursor), please restart your Wii and repeat step 3 until it works. It might take multiple tries, be persistent!

--- a/docs/de_DE/gc-backups.md
+++ b/docs/de_DE/gc-backups.md
@ -2,7 +2,7 @@

 This guide provides instructions on how to manage your GameCube backups, using GameCube Backup Manager. It functions similar to [Wii Backup Manager](wii-backups#using-wii-backup-manager).

-## Anforderungen
+## Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [GameCube Backup Manager](https://github.com/AxionDrak/GameCube-Backup-Manager/releases)
@ -19,7 +19,7 @@ Make sure your USB drive is formatted as FAT32. Do not format it as other types

 :::

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Herunterladen

--- a/docs/de_DE/gcsaves.md
+++ b/docs/de_DE/gcsaves.md
@ -10,7 +10,7 @@ Use of any GameCube peripheral with a Family Edition Wii or Wii Mini require sol

 ## Uploading an Individual Save (.gci File) to a Physical Memory Card

-### Anforderungen
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
@ -28,7 +28,7 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 :::

-### Anleitung
+### Instructions

 #### Herunterladen

@ -60,13 +60,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Backing Up A Save (.gci File) to an SD or USB From a Physical Memory Card

-### Anforderungen
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Anleitung
+### Instructions

 #### Herunterladen

@ -98,13 +98,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Backing Up Your Physical Memory Card Into an Emulated Memory Card (.raw file)

-### Anforderungen
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Anleitung
+### Instructions

 #### Herunterladen

@ -127,13 +127,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Restoring an Emulated Memory Save to a Physical Memory Card

-### Anforderungen
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Anleitung
+### Instructions

 1. If you are trying to restore a save from Dolphin, go to the `File` tab in Dolphin, select open user folder, open the GC folder, and find the `.raw` file.

@ -155,12 +155,12 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Transferring Saves Between 2 Physical Memory Cards

-### Anforderungen
+### Requirements

 - A Wii with GameCube ports
 - At least 2 physical memory cards

-### Anleitung
+### Instructions

 1. Insert both memory cards into the Wii.

--- a/docs/de_DE/hackmii.md
+++ b/docs/de_DE/hackmii.md
@ -10,13 +10,13 @@ It is also safe to [redo any exploit](get-started) to get back into the HackMii

 ## Relaunching via the Homebrew Channel

-### Anforderungen
+### Requirements

 - The Homebrew Channel
 - An SD card or USB drive formatted to FAT32/MS-DOS
 - [HackMii Installer v1.2](https://bootmii.org/download/)

-### Anleitung
+### Instructions

 1. Insert your SD/USB into your PC.
 2. Extract the HackMii Installer v1.2 to the `apps` folder on your SD/USB.
@ -32,7 +32,7 @@ It is also safe to [redo any exploit](get-started) to get back into the HackMii

 ## Relaunching via Priiloader

-### Anforderungen
+### Requirements

 - a Wii with Priiloader (or Preloader) installed
 - An SD card or USB drive formatted to FAT32/MS-DOS
@ -50,7 +50,7 @@ Preloader and older versions of Priiloader do not seem to support SDHC (>2GB) ca

 :::

-### Anleitung
+### Instructions

 1. Insert your SD/USB into your PC.
 2. Copy the `boot.elf` file inside the HackMii Installer v1.2 `.zip` to the root of your SD card or USB drive.
--- a/docs/de_DE/hbc-mini.md
+++ b/docs/de_DE/hbc-mini.md
@ -2,7 +2,7 @@

 Mit dem Homebrew-Kanal kannst du Homebrew-Anwendungen ausführen.

-## Anleitung
+## Instructions

 ::: warning

--- a/docs/de_DE/hbc.md
+++ b/docs/de_DE/hbc.md
@ -13,7 +13,7 @@ You can always [install it later](hackmii).

 :::

-## Anleitung
+## Instructions

 1. Your console should be powered on and showing the HackMii Installer from the previous part of the guide.

--- a/docs/de_DE/homebrew-dolphin.md
+++ b/docs/de_DE/homebrew-dolphin.md
@ -2,13 +2,13 @@

 On Dolphin Emulator version `5.0-4588` or later, the Wii Menu can be easily installed through Dolphin itself. Once this is done, the Homebrew Channel can be installed, although not in the same manner as a physical Wii.

-## Anforderungen
+## Requirements

 - A Windows/MacOS/Linux computer with an Internet connection
 - [Dolphin Emulator](https://dolphin-emu.org/download/) version `5.0-4588` or later
 - The latest version of [Open Homebrew Channel](https://github.com/Wii-Mini-Hacking/hbc/releases)

-## Anleitung
+## Instructions

 1. If you have not already done so, install the Wii Menu on Dolphin Emulator by going to `Tools > Perform System Update`.

--- a/docs/de_DE/index.md
+++ b/docs/de_DE/index.md
@ -55,7 +55,7 @@ This guide aims to do the following, including optional sections:
 - **This guide applies to retail/consumer Wiis ONLY!** This means that development units are not covered.
 - Depending on what you intend to do with your modded Wii, you may have to make some modifications to the system memory that have a risk of bricking (rendering the console inoperable). As long as you follow this guide exactly, you should be fine, but for general brick prevention tips see [this](bricks#brick-prevention) page.
 - The differences between the Wii and Wii mini are quite significant. This means that in some cases, something that is normally harmless to the Wii could cause a [severe brick](bricks#wi-fi-brick) to the Wii mini. Tread carefully if you are planning to mod one!
- Be extremely careful when modifying a [Korean Wii](bricks#korean-kiierror-003-brick).
+- Be extremely careful when modifying a [Korean Wii](bricks#koreankii-error-003-brick).

 ## Ready?

--- a/docs/de_DE/letterbomb.md
+++ b/docs/de_DE/letterbomb.md
@ -14,13 +14,13 @@ Do NOT use any of the MAC address examples shown in this guide, as they will sim

 :::

-## Anforderungen
+## Requirements

 - An SD card formatted as FAT32 that is 32GB or less
 - A Wii on System Menu version 4.3
 - A Windows/MacOS/Linux computer with an Internet connection

-## Anleitung
+## Instructions

 1. Schalte deine Konsole ein.

@ -67,7 +67,7 @@ Do NOT use any of the MAC address examples shown in this guide, as they will sim
    - If your Wii freezes after clicking on the letter, you probably chose the wrong region when downloading the exploit. Redo Step 2 and select the correct region.
    - If all is correct and there is freezing, keep on trying until it works.

-16. It'll then proceed to download and load the HackMii Installer.
+16. If the exploit was successful, your device will have loaded the HackMii Installer.

 ![](/images/exploits/letterbomb/LetterBomb-Wii.png)

--- a/docs/de_DE/modmii.md
+++ b/docs/de_DE/modmii.md
@ -46,7 +46,7 @@ The chart below will help you determine what can be done in either interface.

 :::details Click here for a detailed explanation of each tool.

-| Tool                                                                                                           | Beschreibung                                                                                                                                                                                                                                                                                                      |
+| Tool                                                                                                           | Description                                                                                                                                                                                                                                                                                                       |
 | -------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | W = ModMii Wizard <-- Start Here to Mod Your Wii!                                     | This option can be used to hack your Wii for the first time or re-hack a Wii that has been previously modded.                                                                                                                                                                                     |
 | SU = SysCheck Updater Wizard (update only your outdated softmods)                           | This option checks for and updates old modifications installed to their wii such as DarkCorp/CIOSSPAGHETTI that can potentially cause problems for the latest homebrew custom firmware.                                                                                                           |
@ -71,7 +71,7 @@ When using ModMii, it is important to note that it will generate a custom guide

 ## Installing ModMii

-### Anforderungen
+### Requirements

 - Eine Wii
 - A USB drive or SD Card
--- a/docs/de_DE/osc.md
+++ b/docs/de_DE/osc.md
@ -12,13 +12,13 @@ There are two methods to use the Open Shop Channel: on your Wii through Homebrew

 ## Method I - Homebrew Browser

-### Anforderungen
+### Requirements

 - A homebrewed Wii with an active Internet connection
 - Eine SD-Karte oder ein USB-Laufwerk
 - [Homebrew Browser](https://oscwii.org/library/app/homebrew_browser)

-### Anleitung
+### Instructions

 1. Download the recommended `.zip` file from the Open Shop Channel website.

@ -30,7 +30,7 @@ There are two methods to use the Open Shop Channel: on your Wii through Homebrew

 ## Method II - OSCDL

-### Anforderungen
+### Requirements

 - A Windows/macOS/Linux computer with an internet connection
 - Eine SD-Karte oder ein USB-Laufwerk
--- a/docs/de_DE/priiloader.md
+++ b/docs/de_DE/priiloader.md
@ -4,7 +4,7 @@

 Additionally, it can be used to quickly launch any Title or Homebrew, or change the way Wii autoboots.

-## Anforderungen
+## Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [Priiloader Installer](https://oscwii.org/library/app/priiloader) (the `.zip` file)
@ -16,7 +16,7 @@ Additionally, it can be used to quickly launch any Title or Homebrew, or change
 - [Priiloader Wii U Forwarder](https://github.com/DacoTaco/priiloader/releases/download/0.10.0/PriiloaderWiiUForwarder.zip) (direct download)
  - [Aroma](https://wiiu.hacks.guide/#/aroma/getting-started) must be installed on your console for Priiloader Wii U Forwarder to function.

-## Anleitung
+## Instructions

 ### Section I - Prep Work

--- a/docs/de_DE/recommended-homebrew.md
+++ b/docs/de_DE/recommended-homebrew.md
@ -9,7 +9,7 @@ Homebrew that has the ability to make permanant changes to your Wii are highligh
 - [**YAWM ModMii Edition**](https://oscwii.org/library/app/yawmME) - An extensively supported WAD manager with additional features. Recommended over any other WAD manager due to its extensive anti-brick protection.
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME) - A homebrew application which checks information about your Wii and pastes it back in a readable, sendable format. Think of it like a "System Information" app but for the Wii.
 - [**CDBackup**](https://oscwii.org/library/app/cdbackup) - Backup, restore, and delete Wii Message Board data.
- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) so **only use this app if you know what you are doing**.
+- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#koreankii-error-003-brick) so **only use this app if you know what you are doing**.
 - [**WiiXplorer-SS**](https://oscwii.org/library/app/wiixplorer-ss) - A modified and updated version of WiiXplorer. A file manager for the Wii, it allows you to view and customize files both on an SD card, a USB device, and the internal Wii memory. For this reason it is a very powerful but also dangerous tool - don't modify files on the system NAND unless you know what you are doing, as it can lead to various types of [bricks](bricks).
 - [**SaveGame Manager GX**](https://oscwii.org/library/app/SaveGame_Manager_GX) - A savegame/Mii extractor for the Wii. It supports GameCube memory cards (physical and virtual), emuNANDs, normal and protected saves, themes, and more.
 - [**csm-installer**](https://oscwii.org/library/app/csm-installer) - An application that allows you to theme the Wii Menu. While quite useful to make your Wii unique, it also has the ability to cause a [minor brick](bricks#theme-brick), so make sure to read our [theme guide](themes) for safe usage instructions.
--- a/docs/de_DE/recovery-mode.md
+++ b/docs/de_DE/recovery-mode.md
@ -13,7 +13,7 @@ This check can be bypassed using Priiloader, which allows Recovery Mode to boot

 ## Accessing and Using Recovery Mode

-### Anforderungen
+### Requirements

 - A GameCube controller
 - If the Diagnostic Disc Check was previously removed with Priiloader, or if a drive chip is on hand:
--- a/docs/de_DE/str2hax.md
+++ b/docs/de_DE/str2hax.md
@ -14,11 +14,11 @@ If you have installed a mod like CTGP Revolution or Project+, str2hax may load t

 :::

-## Anforderungen
+## Requirements

 - Eine Wii mit Internetverbindung

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Verbinden

@ -90,7 +90,7 @@ This exploit requires you to set your DNS in order to connect to a server that c

 4. Give the exploit 1-2 minutes to download (and don't press `I ACCEPT`/`I DO NOT ACCEPT`).

-5. It'll then proceed to download and load the HackMii Installer.
+5. If the exploit was successful, your device will have loaded the HackMii Installer.

   ![](/images/hackmii/scam.png)

--- a/docs/de_DE/syscheck.md
+++ b/docs/de_DE/syscheck.md
@ -2,12 +2,12 @@

 A SysCheck lists all the IOS and cIOS that are on your Wii, along with some information about each of them. It also gives you some other useful information. When you have IOS-related problems on your Wii, someone might ask you to do a SysCheck.

-## Anforderungen
+## Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME)

-## Anleitung
+## Instructions

 ### Section I - Downloading/Installing

--- a/docs/de_DE/themes.md
+++ b/docs/de_DE/themes.md
@ -41,7 +41,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file
 - [GBAtemp Other Files for Wii](https://gbatemp.net/download/categories/other-files.166/) (.mym file distribution)
 - [Wii Themer](http://www.wiithemer.org/) (This site can build a .csm ready to install for Wii and vWii only, but for Wii mini you may download the .mym files from their [Theme Database](http://wiithemer.org/mym/))

-### Anforderungen
+### Requirements

 - Extract MyMenuifyMod.zip to your SD card or USB drive.
 - A Windows PC with an Internet connection
@ -52,7 +52,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::: tabs

-:::: tab csm-installer
+:::: tab (All) Via csm-installer

 1. Extract the csm-installer `.zip` file to the root of your SD card or USB device.
 2. Insert your SD card or USB device into your console, and launch the Homebrew Channel.
@ -62,7 +62,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-wii
+:::: tab (Wii) Via NUS Downloader

 1. On your computer, download [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
 2. Copy all files from the NUS Downloader `.zip` to a folder on your computer.
@ -79,7 +79,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-vwii
+:::: tab (vWii) Via NUS Downloader

 1. On your computer, download [NUS Downloader (vWii)](/assets/files/NUSDownloader-vwii.zip)
 2. Copy all files from the vWii NUS Downloader `.zip` to a folder on your computer.
@ -110,7 +110,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab thememii
+:::: tab (Wii) Via ThemeMii

 1. Create a `themes` folder on the root of your SD card/USB device.
 2. Extract the ThemeMii MOD `.zip` to a location on your PC.
@ -147,7 +147,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 Unfortunately, because of the codebase difference between the original WiiFlow and the newer WiiFlow Lite, themes are sparse - in fact, only one theme could be found that confidently works on the newer version. The instructions for installing that theme are below.

-### Anforderungen
+### Requirements

 - Eine Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
@ -155,7 +155,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a
 - Solltest du hinsichtlich dieses Tutorials Hilfe benötigen, trete bitte dem <a href="https://discord.gg/rc24">RiiConnect24 Discord-Server</a> bei (empfohlen), oder kontaktiere uns <a href="mailto:support@riiconnect24.net">per E-Mail unter support@riiconnect24.net</a>.
 - [Rhapsodii Shima](https://gbatemp.net/threads/rhapsodii-shima-5-4.555062/)

-### Anleitung
+### Instructions

 1. Have the storage device that holds WiiFlow Lite connected to your PC.
 2. Download the Rhapsodii Shima archive, either version of the theme works and can be installed side-by-side with no issues.
@ -164,7 +164,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a

 ## USB Loader GX Theming

-### Anforderungen
+### Requirements

 - Eine Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
@ -172,7 +172,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a
 - Solltest du hinsichtlich dieses Tutorials Hilfe benötigen, trete bitte dem <a href="https://discord.gg/rc24">RiiConnect24 Discord-Server</a> bei (empfohlen), oder kontaktiere uns <a href="mailto:support@riiconnect24.net">per E-Mail unter support@riiconnect24.net</a>.
 - A [theme](https://gbatemp.net/threads/dark-wii-usb-loader-gx-themes.584493/), this link contains an assortment of dark themes

-### Anleitung
+### Instructions

 1. Download a theme `.zip` file from the website linked above, or anywhere else you can get a proper theme.
 2. Unpack the `.zip` file's contents into the `apps\usbloader_gx` directory on the storage device where you installed USB Loader GX.
@ -182,14 +182,14 @@ Unfortunately, because of the codebase difference between the original WiiFlow a

 ## Homebrew Channel Theming

-### Anforderungen
+### Requirements

 - Eine Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
 - Ein Computer mit Windows (oder nutze Mono oder Wine auf macOS/Linux)
 - A [theme](https://wiibrew.org/wiki/Homebrew_Channel/Themes) from WiiBrew

-### Anleitung
+### Instructions

 1. Download a theme `.zip` file from the website linked above.

--- a/docs/de_DE/update.md
+++ b/docs/de_DE/update.md
@ -8,7 +8,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.

 :::

-## Anforderungen
+## Requirements

 - a Wii with The Homebrew Channel 1.0.8 or later
  - If you do not have the Homebrew Channel or it is out of date, please [start here](get-started) to (re)install it first.
@ -18,7 +18,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.
 - [Priiloader](priiloader)
 - [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Herunterladen

--- a/docs/de_DE/vwii-homebrew-channel-no-wiiu-mods.md
+++ b/docs/de_DE/vwii-homebrew-channel-no-wiiu-mods.md
@ -2,7 +2,7 @@

 This page will guide you through the process of installing the Homebrew Channel to the vWii without modding the Wii U side.

-## Anleitung
+## Instructions

 ### Section I - Booting into Aroma

--- a/docs/de_DE/vwii-homebrew-channel.md
+++ b/docs/de_DE/vwii-homebrew-channel.md
@ -18,7 +18,7 @@ Otherwise, proceed to [Installing Aroma](https://wiiu.hacks.guide/#/aroma/gettin

 :::

-## Anforderungen
+## Requirements

 - A modded Wii U
 - The [Aroma Environment](https://aroma.foryour.cafe/)
@ -31,7 +31,7 @@ If the evWii Aroma plugin is not installed, and a homebrew app hangs, the only w

 :::

-## Anleitung
+## Instructions

 ### Section I - Files

--- a/docs/de_DE/wii-backups.md
+++ b/docs/de_DE/wii-backups.md
@ -66,14 +66,14 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Manager

-### Anforderungen
+### Requirements

 - A PC running Windows
 - A USB drive or SD card
 - A dumped ISO from a Wii game disc
 - [Wii Backup Manager](https://static.wiidatabase.de/Wii-Backup-Manager.zip)

-### Anleitung
+### Instructions

 #### Section I - Installation

@ -102,7 +102,7 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Fusion

-### Anforderungen
+### Requirements

 - A PC running MacOS or Linux
 - A USB drive or SD card
@ -110,7 +110,7 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f
 - [Wii Backup Fusion](https://github.com/larsenv/Wii-Backup-Fusion)
 - [Wiimm's ISO Tools](https://wit.wiimm.de/download.html)

-### Anleitung
+### Instructions

 #### Section I - Installation

--- a/docs/de_DE/wii-factory-reset.md
+++ b/docs/de_DE/wii-factory-reset.md
@ -26,7 +26,7 @@ If you are trying to [update your Wii to 4.3U](update) with homebrew or update o

 :::

-## Anforderungen
+## Requirements

 - An SD card with at least 512MB of free space
 - A [NAND backup](bootmii) from the specific system you are trying to flash
@ -34,7 +34,7 @@ If you are trying to [update your Wii to 4.3U](update) with homebrew or update o
 - [Ohneschwanzenegger](https://raw.githubusercontent.com/modmii/modmii.github.io/master/temp/ohneschwanzenegger.zip)
 - [Nand BIN Checker](/assets/files/nandBinCheck.zip)

-## Anleitung
+## Instructions

 ### Section I - Preparation

--- a/docs/de_DE/wii-loaders.md
+++ b/docs/de_DE/wii-loaders.md
@ -54,7 +54,7 @@ Below is a single WBFS example, and a split WBFS example. A WBFS needs to be spl

 ## http://www.wiithemer.org/

-### Anforderungen
+### Requirements

 - Eine Wii
 - The latest version of [cIOS](cios)
@ -105,11 +105,11 @@ When you bring the cursor to the bottom of the screen while in flow view, there

 ## USB Loader GX

-### Anforderungen
+### Requirements

 - Eine Wii
 - The latest version of [cIOS](cios)
- [USB Loader GX](https://oscwii.org/library/app/usbloader_gx)
+- [USB Loader GX](https://github.com/wiidev/usbloadergx/releases)

 ### Installation

--- a/docs/de_DE/wiiconnect24.md
+++ b/docs/de_DE/wiiconnect24.md
@ -29,7 +29,7 @@ The guide on how to install these services, as well as the patcher, can be found
 - Eine SD-Karte oder ein USB-Laufwerk
 - [sntp](https://oscwii.org/library/app/sntp)

-#### Anleitung
+#### Instructions

 1. Download and extract the sntp zip to the root of your SD card or USB drive.
 2. Insert your SD card or USB drive into your Wii.
@ -46,7 +46,7 @@ The guide on how to install these services, as well as the patcher, can be found
 - Eine SD-Karte
 - [Priiloader](priiloader)

-#### Anleitung
+#### Instructions

 1. Visit the [UTC Patch Generator](https://garyodernichts.github.io/priiloader-patch-gen/) website and fill out the information.
 2. Select generate and copy the information.
--- a/docs/de_DE/wiigsc.md
+++ b/docs/de_DE/wiigsc.md
@ -20,7 +20,7 @@ The Wii Menu is limited to 48 channels, not including existing system channels.

 :::

-## Anforderungen
+## Requirements

 - Eine Wii
 - An SD or USB drive
@ -28,7 +28,7 @@ The Wii Menu is limited to 48 channels, not including existing system channels.
 - A Windows computer.
 - [WiiGSC](https://wiidatabase.de/downloads/pc-tools/wiigsc-ehemals-crap/)

-## Anleitung
+## Instructions

 1. Install WiiGSC, then right click on it and choose **Run as administrator**. If you do not do this, WiiGSC will throw an error when you open it.

--- a/docs/de_DE/wiimmfi.md
+++ b/docs/de_DE/wiimmfi.md
@ -22,12 +22,12 @@ If the `Wiimmfi Patch` displays as anything other than v4, you do not have the l

 A method for Wiimmfi patching which runs on retail disc games automatically via the Disc Channel.

-### Anforderungen
+### Requirements

 - Eine Wii mit Priiloader 0.9 oder neuer installiert
 - [Priiloader](priiloader) 0.9 or later

-### Anleitung
+### Instructions

 1. Hold the RESET button while turning on your Wii. Wenn du eine Wii mini verwendest, schließe eine USB-Tastatur an und halte die Escape-Taste gedrückt, während du die Konsole einschaltest.

@ -58,12 +58,12 @@ A method for Wiimmfi patching which runs on retail disc games automatically via

 There's an easy method to patch games to use Wiimmfi that can be used whether or not you have homebrew on your Wii.

-### Anforderungen
+### Requirements

 - Mario Kart Wii Competitions
 - [USB Loader GX or WiiFlow Lite](wii-loaders)

-### Anleitung
+### Instructions

 1. Open the game or global settings for your specific USB loader and search for the `Private Server` option. By default, it will be set to `Off`.
 2. Set the option to `Wiimmfi` and save the settings. By default, games should now be automatically patched for Wiimmfi.
@ -86,11 +86,11 @@ To solve this issue, Wiimmfi has a custom DNS server that can be ran on your PC

 :::

-### Anforderungen
+### Requirements

 - Mario Kart Wii Competitions

-### Anleitung
+### Instructions

 1. Go to `Wii Settings > Internet > Connection Settings` and select whatever connection you are using. Then, `Change Settings > Auto-Obtain DNS NO > Advanced Settings`. Set your primary DNS to `95.217.77.181`, and your secondary DNS to `1.1.1.1`.
 2. If you're using the Wii U, you will have to run the competitions patcher whenever you want to check for a competition, because WiiConnect24 is not enabled on the Wii U.
@ -100,12 +100,12 @@ To solve this issue, Wiimmfi has a custom DNS server that can be ran on your PC

 A method for Wiimmfi patching which runs on retail disc games, but must be manually launched via the Homebrew Channel.

-### Anforderungen
+### Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [Auto Wiimmfi Patcher](https://oscwii.org/library/app/wiimmfipatcher)

-### Anleitung
+### Instructions

 1. Simply extract the `apps` folder in this archive to the root of your SD card or USB drive.
 2. Insert your SD Card into your Wii, and launch Auto Wiimmfi Patcher from the Homebrew Channel.
@ -115,11 +115,11 @@ A method for Wiimmfi patching which runs on retail disc games, but must be manua

 A method for Wiimmfi patching which runs on retail game discs, but must be manually launched via the EULA User Agreement (derives from [str2hax](str2hax)). Due to the nature of this process, it can be ran on Wiis without homebrew.

-### Anforderungen
+### Requirements

 - Mario Kart Wii Competitions

-### Anleitung
+### Instructions

 1. Insert your game disc.

@ -145,12 +145,12 @@ If you run into UPnP-related issues (such as the patcher getting stuch at "Init

 A method for Wiimmfi patching which runs on retail game discs, but must be manually launched via the Internet Channel (derives from [Flashhax](flashhax)). Due to the nature of this process, it can be ran on Wiis without homebrew. [This](wiimmfi#manual-disc-patching-via-eula-user-agreement) method is generally more reliable, and is recommended instead.

-### Anforderungen
+### Requirements

 - A Wii with an internet connection, running in 60Hz mode
 - The Internet Channel

-### Anleitung
+### Instructions

 1. Open the following webpage in the Internet Channel: `http://chadsoft.co.uk/wiimmfi`
 2. Add the page to the browser favorites by clicking the Star icon, then the `Add Favorite` button.
@ -162,14 +162,14 @@ A method for Wiimmfi patching which runs on retail game discs, but must be manua

 A method for Wiimmfi patching which runs on WiiWare games, but must be manually run on a PC via a script.

-### Anforderungen
+### Requirements

 - Eine SD-Karte
 - Eine Kopie deines Spieles (im WAD-Format)
 - [WiiWare Patcher](https://github.com/RiiConnect24/WiiWare-Patcher/releases/latest) (cross platform)
 - [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)

-### Anleitung
+### Instructions

 1. Extract the .zip of the latest version of WiiWare Patcher, and put your WAD in it.
 2. Run the patch script for your OS: usually it will end in `.bat` for Windows and `.sh` for Mac/Linux. If you're using the RiiConnect24 Patcher, select your device (Wii, vWii, or Dolphin) and choose the WiiWare patcher.
@ -179,13 +179,13 @@ A method for Wiimmfi patching which runs on WiiWare games, but must be manually

 A method for Wiimmfi patching which runs on game disc images, but must be manually run on a PC via a script.

-### Anforderungen
+### Requirements

 - Ein Computer mit Windows (oder nutze Mono oder Wine auf macOS/Linux)
 - A copy of the game you want to patch - supported formats are `ISO`, `WDF`, `WIA`, `CISO (=WBI)`, `WBFS`, `GCZ`, and `FST` - `NKIT` is NOT supported
 - [Wiimmfi ISO Patcher](https://download.wiimmfi.de/patcher/wiimmfi-patcher-latest.zip)

-### Anleitung
+### Instructions

 1. Download the patcher and extract the `.zip` file.
 2. Your copy of your game (WBFS, ISO, cISO, and other forms that a Wii can use are supported).
--- a/docs/de_DE/wiiu-nand-dumper.md
+++ b/docs/de_DE/wiiu-nand-dumper.md
@ -12,7 +12,7 @@ If your Wii U side is already modded, proceed to [Installing the Homebrew Channe

 Your SD Card will need to be formatted as FAT32. If your SD Card is not formatted to FAT32, use [GUIFormat](http://ridgecrop.co.uk/index.htm?guiformat.htm) with 32k (32768) Allocation unit size to format it. **Do not** label the SD Card as `wiiu` or it will cause issues with homebrew.

-## Anforderungen
+## Requirements

 - The latest files from [Aroma for your café](https://aroma.foryour.cafe/).
  - Review the preliminal steps, then check all 4 boxes.
@ -21,7 +21,7 @@ Your SD Card will need to be formatted as FAT32. If your SD Card is not formatte
  - Click on `Download Base Aroma`.
 - The latest release of the [Compat Title Installer](https://hb-app.store/wiiu/CompatTitleInstaller).

-## Anleitung
+## Instructions

 ### Section I - SD Preparations

--- a/docs/de_DE/wilbrand.md
+++ b/docs/de_DE/wilbrand.md
@ -16,7 +16,7 @@ Wilbrand Web is recommended for its ease of use.

 ## Wilbrand Web

-### Anforderungen
+### Requirements

 - An SD card formatted to FAT32/MS-DOS
 - A Wii on version 3.0 or newer
@ -27,7 +27,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.

 :::

-### Anleitung
+### Instructions

 1. Schalte deine Konsole ein.

@ -76,7 +76,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
    - In some cases, you may need to check the messages for tomorrow or yesterday for the letter to show up.
    - If you don't see the green letter, check if any errors appear in the SD card section of `Data Management`. If any do, there may be an issue with the SD card format or the Wii's SD card reader.

-17. It'll then proceed to download and load the HackMii Installer.
+17. If the exploit was successful, your device will have loaded the HackMii Installer.
    - If your Wii gets stuck on a black screen, power it off by holding the POWER button, then try again.
    - If you get sent back to the Wii Menu after opening the letter, ensure that the lock switch on your SD card is in the unlocked position.

@ -92,7 +92,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.

 ## Wilbrand CLI

-### Anforderungen
+### Requirements

 - A PC running Windows, MacOS or Linux
 - An SD card formatted to FAT32/MS-DOS
@ -106,7 +106,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.

 :::

-### Anleitung
+### Instructions

 1. Schalte deine Konsole ein.

@ -164,7 +164,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.

    ![](/images/exploits/wilbrand/msgboard.png)

-16. It'll then proceed to download and load the HackMii Installer.
+16. If the exploit was successful, your device will have loaded the HackMii Installer.
    - If your Wii gets stuck on a black screen, power it off by holding the POWER button, then try again.
    - If you get sent back to the Wii Menu after opening the letter, ensure that the lock switch on your SD card is in the unlocked position.

--- a/docs/de_DE/wnd-mini.md
+++ b/docs/de_DE/wnd-mini.md
@ -20,7 +20,7 @@ There is no way to restore your NAND backup this way without a hardmod.

 :::

-## Anforderungen
+## Requirements

 - Eine Wii
 - A USB drive.
@ -28,7 +28,7 @@ There is no way to restore your NAND backup this way without a hardmod.
 - [RealWnD for Wii mini](https://oscwii.org/library/app/RealWnD_Mini)
 - [Xyzzy Mod](https://oscwii.org/library/app/xyzzy-mod)

-## Anleitung
+## Instructions

 ### Section I - Dumping and Patching IOS 36

--- a/docs/de_DE/yawmme.md
+++ b/docs/de_DE/yawmme.md
@ -3,12 +3,12 @@
 YAWM ModMii Edition is an application that can install WADs and launch homebrew applications.
 This tutorial will show you how to install WADs.

-## Anforderungen
+## Requirements

 - Eine SD-Karte oder ein USB-Laufwerk
 - [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)

-## Anleitung
+## Instructions

 ### Abschnitt 1 - Herunterladen

--- a/docs/es_419/bluebomb.md
+++ b/docs/es_419/bluebomb.md
@ -8,14 +8,13 @@ outline: false

 :::: tab BlueBomb Classic

-## BlueBomb Classico
+## BlueBomb Classic

 :::details Technical Details (optional)

-BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries. {% capture technical_info %}<summary line-breaks-before="1" mark="crwd-mark"><em>Technical Details (optional)</em></summary>
-BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries.
+BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries. Although it is the only exploit that works for the Wii mini, BlueBomb can run on the original Wii as well.

-Este hack tambien permite recuperar la Wii de ciertos bricks, como banner bricks y algunos theme bricks.
+This exploit also enables recovery from certain bricks, such as banner bricks and (some) theme bricks.

 :::

@ -43,7 +42,7 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### Requisitos
+### Requirements

 - A Linux machine
  - A Virtual Machine may work, but it is not recommended due to its complexity in getting Bluetooth passthrough working. If possible, please use a LiveUSB as described below.
@ -60,7 +59,7 @@ Make sure that the console is close to the computer running the exploit, ideally
  - This cannot be the same flash drive used for your Linux Machine.
 - [HackMii Installer v1.2](https://bootmii.org/download/)

-### Instrucciones
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
@ -68,7 +67,7 @@ Make sure that the console is close to the computer running the exploit, ideally

 2. Reinsert your flash drive into your console.
   - For a Wii mini, the USB port is on the back.
-   - For a normal Wii, use the bottom port. (or the right port if it's upright).
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

 3. Power on your console.

@ -104,8 +103,8 @@ Make sure that the console is close to the computer running the exploit, ideally
 12. Press the Sync button repeatedly until the terminal shows `got connection handle`.
    - This could take numerous attempts.

-13. The exploit will download the HackMii Installer so you can continue.
-    - You can now shut down your Linux computer if you are not planning to use it later.
+13. If the exploit was successful, your device will have loaded the HackMii Installer.
+    - If you are not planning to use it later, you can now shut down your Linux distro.

 ::: info

@ -127,7 +126,7 @@ If using a Wii mini: [Continue to Homebrew Channel installation](hbc-mini)

 :::details Technical Details (optional)

-Este hack tambien permite recuperar la Wii de ciertos bricks, como banner bricks y algunos theme bricks.
+This exploit also enables recovery from certain bricks, such as banner bricks and (some) theme bricks.

 :::

@ -155,7 +154,7 @@ Make sure that the console is close to the computer running the exploit, ideally

 :::

-### Requisitos
+### Requirements

 - A Rasperry Pi Pico W or an ESP32 with BR/EDR (Classic) support.
 - A USB flash drive formatted as FAT32.
@ -167,7 +166,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

 :::

-### Instrucciones
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
@ -175,7 +174,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

 2. Reinsert your flash drive into your console.
   - For a Wii mini, the USB port is on the back.
-   - For a normal Wii, use the bottom port. (or the right port if it's upright).
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

 3. Power on your console.

@ -210,7 +209,7 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit
   - **Do not** connect any Wii Remotes.
 3. Press the Sync button repeatedly until the bluebomb screen shows up.
   - This could take numerous attempts.
-4. The exploit will download the HackMii Installer so you can continue.
+4. If the exploit was successful, your device will have loaded the HackMii Installer.

 ::: tip

--- a/docs/es_419/bricks.md
+++ b/docs/es_419/bricks.md
@ -16,7 +16,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Do NOT attempt region changing methods meant for Wii on the vWii or Wii mini**
 - **Do NOT use a Nintendo Wi-Fi Connection service unless it is known to be RCE patched (such as [Wiimmfi](wiimmfi)). Doing otherwise could allow a malicious actor to BRICK your Console!**
 - **Only install updates for your own region!**.
-  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
+  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
 - **Do NOT delete or modify system files, install old versions of your Wii Menu or IOS, and do NOT install any system file mods unless you know what you are doing!**
  - An example of modifying files going wrong is replacing IOS80 on Wii mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick).
 - **Do NOT install homebrew from untrustworthy sources or if the source code is not available.**
@ -26,7 +26,7 @@ Preventing a brick involves many rules that range between common sense and fail-
 - **Ensure that you know what you are doing when running homebrew apps - especially those with the ability to modify system files. Be ESPECIALLY careful when using applications such as:**
  - AnyTitle Deleter
  - AnyRegion Changer
-  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick)
+  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick)
  - Firmware Downgraders
  - Any other app that modifies critical NAND files
 - **DO NOT TOUCH THE WII'S POWER SOURCE OR POWER BUTTONS WHEN INSTALLING OR MODIFYING CRITICAL SYSTEM CONTENT**.
@ -53,7 +53,7 @@ This is a section intended to help you diagnose a potential brick, in order by l
  - If this randomly started happening, and you can access Maintenance Mode by holding +/- on the health/warning screen, see [mail brick](bricks#mail-brick).
 - Wii starts, and you see the health/warning screen, but upon pressing A to start, the screen goes black and/or freezes and does not continue. Maintenance mode is accessible. See [mail brick](bricks#mail-brick).
 - Wii starts, BUT you INSTANTLY see an error that resembles the Opera web browser. See [Wii Menu/Opera brick](bricks#wii-menuopera-brick).
- Error 003. See [Korean Kii/Error 003 brick](bricks#error-003-brick).
+- Error 003. See [Korean Kii/Error 003 brick](bricks#koreankii-error-003-brick).
 - Nothing happens, black screen, BUT BootMii as boot2 is accessible. See [IOS brick](bricks#ios-brick).
 - Nothing happens, black screen, BUT Wii can be turned on with a Wiimote/Recovery Mode can be accessed. See [Wi-Fi brick](bricks#wi-fi-brick).
 - Nothing happens, black screen. Wii cannot be turned on with a Wiimote, Recovery Mode cannot be started, and BootMii as boot2 is not accessible. See [low-level brick](bricks#low-level-brick).
@ -122,7 +122,7 @@ A theme brick occurs when a wrongly formatted theme is installed.

 ### Solutions

-Alternatively, go into <a href="yawmme">YAWM ModMii Edition</a> and install the CORRECT default Wii Menu WAD for your region and version. Alternatively, go into [YAWM ModMii Edition](yawmme) and install the CORRECT default Wii Menu WAD for your region and version.
+To resolve this issue, open HBC through Priiloader or BootMii as boot2 and access csm-installer to install a default theme such as the base Wii Menu theme. Alternatively, go into [YAWM ModMii Edition](yawmme) and install the CORRECT default Wii Menu WAD for your region and version.

 ## Mail brick

@ -177,7 +177,7 @@ unauthorized device has been detected.

 ### Cause

-When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is <strong x-id="1">not</strong> Korean.
+When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. If this check succeeds, the error triggers and the Wii is effectively bricked.

 This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii.

--- a/docs/es_419/faq.md
+++ b/docs/es_419/faq.md
@ -42,7 +42,7 @@ If you get error FORE000006, your Wii's clock is probably set incorrectly. See [

 ### How can I remove parental controls?

-The [mkey generator](https://mkey.eiphax.tech/) can generate the code required to remove parental controls.
+The [mkey generator](https://mkey.nintendohomebrew.com/) can generate the code required to remove parental controls.

 ### I think my Wii is bricked, or something is seriously wrong, what do I do?

--- a/docs/es_419/flashhax.md
+++ b/docs/es_419/flashhax.md
@ -39,7 +39,7 @@ FlashHax is an exploit for the Wii that is triggered by using the Internet Chann

   ![](/images/exploits/flashhax/wait-for-download.png)

-3. The exploit will download the HackMii Installer so you can continue.
+3. If the exploit was successful, your device will have loaded the HackMii Installer.
   - This may take multiple tries.
   - If the HackMii Installer doesn't load and it instead freezes (you can't move your cursor), please restart your Wii and repeat step 3 until it works. It might take multiple tries, be persistent!

--- a/docs/es_419/index.md
+++ b/docs/es_419/index.md
@ -55,7 +55,7 @@ This guide aims to do the following, including optional sections:
 - **This guide applies to retail/consumer Wiis ONLY!** This means that development units are not covered.
 - Depending on what you intend to do with your modded Wii, you may have to make some modifications to the system memory that have a risk of bricking (rendering the console inoperable). As long as you follow this guide exactly, you should be fine, but for general brick prevention tips see [this](bricks#brick-prevention) page.
 - The differences between the Wii and Wii mini are quite significant. This means that in some cases, something that is normally harmless to the Wii could cause a [severe brick](bricks#wi-fi-brick) to the Wii mini. Tread carefully if you are planning to mod one!
- Be extremely careful when modifying a [Korean Wii](bricks#korean-kiierror-003-brick).
+- Be extremely careful when modifying a [Korean Wii](bricks#koreankii-error-003-brick).

 ## Ready?

--- a/docs/es_419/letterbomb.md
+++ b/docs/es_419/letterbomb.md
@ -67,7 +67,7 @@ Do NOT use any of the MAC address examples shown in this guide, as they will sim
    - If your Wii freezes after clicking on the letter, you probably chose the wrong region when downloading the exploit. Redo Step 2 and select the correct region.
    - If all is correct and there is freezing, keep on trying until it works.

-16. The exploit will download the HackMii Installer so you can continue.
+16. If the exploit was successful, your device will have loaded the HackMii Installer.

 ![](/images/exploits/letterbomb/LetterBomb-Wii.png)

--- a/docs/es_419/modmii.md
+++ b/docs/es_419/modmii.md
@ -71,7 +71,7 @@ When using ModMii, it is important to note that it will generate a custom guide

 ## Installing ModMii

-### Requisitos
+### Requirements

 - A Wii
 - A USB drive or SD Card
--- a/docs/es_419/priiloader.md
+++ b/docs/es_419/priiloader.md
@ -71,7 +71,7 @@ Later on, to enter it you can:

   ::: warning

-   If you are using a USB drive to install Priiloader, make sure you do not have an SD card inserted at the same time.
+   If you have put the Priiloader installer on your USB drive, make sure you do not have an SD card inserted at the same time.

   Doing so will cause Priiloader to fail to find the `hacks_hash.ini` file.

--- a/docs/es_419/recommended-homebrew.md
+++ b/docs/es_419/recommended-homebrew.md
@ -9,7 +9,7 @@ Homebrew that has the ability to make permanant changes to your Wii are highligh
 - [**YAWM ModMii Edition**](https://oscwii.org/library/app/yawmME) - An extensively supported WAD manager with additional features. Recommended over any other WAD manager due to its extensive anti-brick protection.
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME) - A homebrew application which checks information about your Wii and pastes it back in a readable, sendable format. Think of it like a "System Information" app but for the Wii.
 - [**CDBackup**](https://oscwii.org/library/app/cdbackup) - Backup, restore, and delete Wii Message Board data.
- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) so **only use this app if you know what you are doing**.
+- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#koreankii-error-003-brick) so **only use this app if you know what you are doing**.
 - [**WiiXplorer-SS**](https://oscwii.org/library/app/wiixplorer-ss) - A modified and updated version of WiiXplorer. A file manager for the Wii, it allows you to view and customize files both on an SD card, a USB device, and the internal Wii memory. For this reason it is a very powerful but also dangerous tool - don't modify files on the system NAND unless you know what you are doing, as it can lead to various types of [bricks](bricks).
 - [**SaveGame Manager GX**](https://oscwii.org/library/app/SaveGame_Manager_GX) - A savegame/Mii extractor for the Wii. It supports GameCube memory cards (physical and virtual), emuNANDs, normal and protected saves, themes, and more.
 - [**csm-installer**](https://oscwii.org/library/app/csm-installer) - An application that allows you to theme the Wii Menu. While quite useful to make your Wii unique, it also has the ability to cause a [minor brick](bricks#theme-brick), so make sure to read our [theme guide](themes) for safe usage instructions.
--- a/docs/es_419/str2hax.md
+++ b/docs/es_419/str2hax.md
@ -90,7 +90,7 @@ This exploit requires you to set your DNS in order to connect to a server that c

 4. Give the exploit 1-2 minutes to download (and don't press `I ACCEPT`/`I DO NOT ACCEPT`).

-5. The exploit will download the HackMii Installer so you can continue.
+5. If the exploit was successful, your device will have loaded the HackMii Installer.

   ![](/images/hackmii/scam.png)

--- a/docs/es_419/themes.md
+++ b/docs/es_419/themes.md
@ -52,7 +52,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::: tabs

-:::: tab csm-installer
+:::: tab (All) Via csm-installer

 1. Extract the csm-installer `.zip` file to the root of your SD card or USB device.
 2. Insert your SD card or USB device into your console, and launch the Homebrew Channel.
@ -62,7 +62,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-wii
+:::: tab (Wii) Via NUS Downloader

 1. On your computer, download [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
 2. Copy all files from the NUS Downloader `.zip` to a folder on your computer.
@ -79,7 +79,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-vwii
+:::: tab (vWii) Via NUS Downloader

 1. On your computer, download [NUS Downloader (vWii)](/assets/files/NUSDownloader-vwii.zip)
 2. Copy all files from the vWii NUS Downloader `.zip` to a folder on your computer.
@ -110,7 +110,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab thememii
+:::: tab (Wii) Via ThemeMii

 1. Create a `themes` folder on the root of your SD card/USB device.
 2. Extract the ThemeMii MOD `.zip` to a location on your PC.
--- a/docs/es_419/wii-backups.md
+++ b/docs/es_419/wii-backups.md
@ -66,19 +66,19 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Manager

-### Requisitos
+### Requirements

 - A PC running Windows
- Una unidad USB
+- A USB drive or SD card
 - A dumped ISO from a Wii game disc
 - [Wii Backup Manager](https://static.wiidatabase.de/Wii-Backup-Manager.zip)

-### Instrucciones
+### Instructions

 #### Section I - Installation

 1. Extract Wii Backup Manager, and launch the program.
-2. Insert your USB drive into your computer.
+2. Insert your USB drive or SD card into your computer.

 #### Section II - Copying Games

@ -102,15 +102,15 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Fusion

-### Requisitos
+### Requirements

 - A PC running MacOS or Linux
- Una unidad USB
+- A USB drive or SD card
 - A dumped ISO from a Wii game disc
 - [Wii Backup Fusion](https://github.com/larsenv/Wii-Backup-Fusion)
 - [Wiimm's ISO Tools](https://wit.wiimm.de/download.html)

-### Instrucciones
+### Instructions

 #### Section I - Installation

--- a/docs/es_419/wii-loaders.md
+++ b/docs/es_419/wii-loaders.md
@ -109,7 +109,7 @@ When you bring the cursor to the bottom of the screen while in flow view, there

 - You probably will pick the download link that says 4.X, that means the theme will work on version 4.1, 4.2 and 4.3 of the Wii Menu.
 - The latest version of [cIOS](cios)
- [USB Loader GX](https://oscwii.org/library/app/usbloader_gx)
+- [USB Loader GX](https://github.com/wiidev/usbloadergx/releases)

 ### Installation

--- a/docs/es_419/wilbrand.md
+++ b/docs/es_419/wilbrand.md
@ -76,7 +76,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.
    - In some cases, you may need to check the messages for tomorrow or yesterday for the letter to show up.
    - If you don't see the green letter, check if any errors appear in the SD card section of `Data Management`. If there are errors, there may be an issue with the SD card format or the Wii’s SD card reader.

-17. The exploit will download the HackMii Installer so you can continue.
+17. If the exploit was successful, your device will have loaded the HackMii Installer.
    - If your Wii gets stuck on a black screen, power it off by holding the POWER button, then try again.
    - If you get sent back to the Wii Menu after opening the letter, ensure that the lock switch on your SD card is in the unlocked position.

@ -164,7 +164,7 @@ SD cards larger than 2GB will not work on Wii menu versions before 4.0.

    ![](/images/exploits/wilbrand/msgboard.png)

-16. The exploit will download the HackMii Installer so you can continue.
+16. If the exploit was successful, your device will have loaded the HackMii Installer.
    - If your Wii gets stuck on a black screen, power it off by holding the POWER button, then try again.
    - If you get sent back to the Wii Menu after opening the letter, ensure that the lock switch on your SD card is in the unlocked position.

--- a/docs/es_ES/bluebomb.md
+++ b/docs/es_ES/bluebomb.md
@ -2,7 +2,7 @@
 outline: false
 ---

-# Créditos
+# BlueBomb

 ::::: tabs

@ -12,8 +12,7 @@ outline: false

 :::details Technical Details (optional)

-BlueBomb es un exploit que aprovecha una falla en las librerías Bluetooth de la Wii y la Wii mini. {% capture technical_info %}<summary line-breaks-before="1" mark="crwd-mark"><em>Technical Details (optional)</em></summary>
-BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries.
+BlueBomb is an exploit that takes advantage of a flaw in the Wii and Wii mini's Bluetooth libraries. Although it is the only exploit that works for the Wii mini, BlueBomb can run on the original Wii as well.

 This exploit also enables recovery from certain bricks, such as banner bricks and (some) theme bricks.

@ -33,60 +32,60 @@ If you need help with anything regarding this tutorial, please join [the Wii min

 ::: info

-If you are using the original revision of the Wii, you should probably find [another exploit to use](get-started) as there are much easier ways to get to the HackMii installer. Sin embargo, existen excepciones en circunstancias como la recuperación de bloqueos.
+If you are using the original revision of the Wii, you should probably find [another exploit to use](get-started) as there are much easier ways to get to the HackMii installer. Exceptions however, exist in circumstances like brick recovery.

 :::

 ::: info

-Asegúrate de que la consola se encuentre cerca de tu PC al momento de ejecutar el exploit, preferiblemente a una distancia no mayor a un metro.
+Make sure that the console is close to the computer running the exploit, ideally it should be less than 3 feet.

 :::

-### Requisitos
+### Requirements

- Una PC con Linux
-  - Una máquina virtual podría funcionar, pero no es recomendable debido a la dificultad para configurar la conexión Bluetooth. De ser posible, utiliza una Live USB como se describe más adelante.
-  - Si tienes una Raspberry Pi, prueba a usarla, pues es probable que ya tenga Linux instalado.
+- A Linux machine
+  - A Virtual Machine may work, but it is not recommended due to its complexity in getting Bluetooth passthrough working. If possible, please use a LiveUSB as described below.
+  - If you have a Raspberry Pi, you can use that instead as it most likely has Linux installed already.
  - Windows Subsystem for Linux or a Chromebook running Linux mode will _not work_ as they don't have direct access to the Bluetooth adapter or USB ports.
  - If you do not have Linux, [Ubuntu](https://ubuntu.com/download/desktop) is the most user-friendly option and can be ran on computers running Windows or Mac.
    - 32-bit devices will require [Ubuntu 16.04](http://releases.ubuntu.com/16.04/).
-    - Para los equipos de 64 bits se recomienda usar la edición LTS por su estabilidad, aunque la última versión también funcionará.
+    - For 64-bit devices it is recommended to use the LTS edition due to its stability, but the latest release works as well.
  - You can [flash a Linux Live environment to a USB flash drive](https://ubuntu.com/tutorials/tutorial-create-a-usb-stick-on-windows#1-overview) instead of installing it to your computer.
- Un adaptador Bluetooth
-  - Puedes usar el adaptador interno de tu equipo, en caso de que cuente con uno.
-  - Si no tienes un adaptador Bluetooth, asegúrate de conseguir uno que sea compatible con Linux.
- Una unidad USB formateada como FAT32
-  - Esta no puede ser la misma unidad USB que usarás para ejecutar Linux.
+- A Bluetooth adapter.
+  - An internal Bluetooth adapter will work.
+  - If you do not have one, make sure to get one compatible with Linux.
+- A USB flash drive formatted as FAT32.
+  - This cannot be the same flash drive used for your Linux Machine.
 - [HackMii Installer v1.2](https://bootmii.org/download/)

-### Instrucciones
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
-   - Si deseas recuperar tu consola de un brick, también deberás copiar la aplicación homebrew que deseas usar para repararla a la carpeta <code>/apps/</code>.
-   - (Even for a Wii mini, bootmini.elf will **not** work, its purpose is entirely different and unrelated. Usa <code>boot.elf</code> en todos los casos).
+   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
+   - (Even for a Wii mini, bootmini.elf will **not** work, its purpose is entirely different and unrelated. Use boot.elf in all cases).

-2. Vuelve a insertar la memoria USB en la consola.
-   - En la Wii mini, el puerto USB se encuentra en la parte trasera.
-   - En la Wii original, deberás usar el puerto inferior (o el derecho, si tu consola está en posición vertical).
+2. Reinsert your flash drive into your console.
+   - For a Wii mini, the USB port is on the back.
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Enciende la consola.
+3. Power on your console.

 4. Go to `Wii Settings`.

-5. Anota la letra que aparece en la esquina superior derecha, junto a la versión del sistema.
+5. Take note in the top right corner of the letter next to the system version.

-   - Esta letra corresponde a la región del menú de tu consola, que necesitarás saber para los pasos pertinentes.
+   - This letter corresponds to your system menu region, which you will need to know for the corresponding steps.

   ![](/images/wii/SystemMenuVersion.png)

-6. Power off your Wii.
+6. Power off your console.

-7. Inicia tu distribución Linux y asegúrate de que estás conectado a Internet.
+7. Start your Linux distro, and ensure you are connected to the internet.

-8. Abre el Terminal
+8. Open the Terminal

-9. Ejecuta los siguientes comandos:
+9. Run the following commands:

   ```bash
   wget https://wii.hacks.guide/assets/files/bluebomb-helper.sh
@ -94,18 +93,18 @@ Asegúrate de que la consola se encuentre cerca de tu PC al momento de ejecutar
   ./bluebomb-helper.sh
   ```

-10. A continuación, el asistente descargará los archivos necesarios y hará algunas preguntas sobre tu consola.
-    - Si tu consola es una Wii mini, se te pedirá que indiques la región del sistema. This can be determined by the last letter of the Wii Menu version (`U` for **USA** and `E` for **PAL** models).
-    - Si has seleccionado la Wii original, deberás indicar el número de la versión del sistema.
+10. The helper will then download the required files, and ask for information about your console.
+    - If you have selected a Wii mini you will be asked to provide your region. This can be determined by the last letter of the Wii Menu version (`U` for **USA** and `E` for **PAL** models).
+    - If you have selected a Wii you will be asked to provide your Wii Menu Version (What you determined in step 4)

-11. Enciende la consola.
+11. Power on your console.
    - **Do not** connect any Wii Remotes.

 12. Press the Sync button repeatedly until the terminal shows `got connection handle`.
-    - Podría llevar varios intentos.
+    - This could take numerous attempts.

-13. Después de unos segundos, la consola debería de iniciar el HackMii Installer.
-    - Si no piensas utilizarla más adelante, ya puedes apagar tu distribución Linux.
+13. If the exploit was successful, your device will have loaded the HackMii Installer.
+    - If you are not planning to use it later, you can now shut down your Linux distro.

 ::: info

@ -145,20 +144,20 @@ If you need help with anything regarding this tutorial, please join [the Wii min

 ::: info

-If you are using the original revision of the Wii, you should probably find [another exploit to use](get-started) as there are much easier ways to get to the HackMii installer. Sin embargo, existen excepciones en circunstancias como la recuperación de bloqueos.
+If you are using the original revision of the Wii, you should probably find [another exploit to use](get-started) as there are much easier ways to get to the HackMii installer. Exceptions however, exist in circumstances like brick recovery.

 :::

 ::: info

-Asegúrate de que la consola se encuentre cerca de tu PC al momento de ejecutar el exploit, preferiblemente a una distancia no mayor a un metro.
+Make sure that the console is close to the computer running the exploit, ideally it should be less than 3 feet.

 :::

-### Requisitos
+### Requirements

 - A Rasperry Pi Pico W or an ESP32 with BR/EDR (Classic) support.
- Una unidad USB formateada como FAT32
+- A USB flash drive formatted as FAT32.
 - [The HackMii Installer](https://bootmii.org/download/)

 ::: info
@ -167,27 +166,27 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit

 :::

-### Instrucciones
+### Instructions

 1. Copy `boot.elf` from the hackmii_installer_v1.2 `.zip` to the root of your flash drive.
-   - Si deseas recuperar tu consola de un brick, también deberás copiar la aplicación homebrew que deseas usar para repararla a la carpeta <code>/apps/</code>.
-   - (Even for a Wii mini, bootmini.elf will **not** work, its purpose is entirely different and unrelated. Usa <code>boot.elf</code> en todos los casos).
+   - (If attempting to fix a brick, you should also copy the homebrew app you wish to use to /apps/)
+   - (Even for a Wii mini, bootmini.elf will **not** work, its purpose is entirely different and unrelated. Use boot.elf in all cases).

-2. Vuelve a insertar la memoria USB en la consola.
-   - En la Wii mini, el puerto USB se encuentra en la parte trasera.
-   - En la Wii original, deberás usar el puerto inferior (o el derecho, si tu consola está en posición vertical).
+2. Reinsert your flash drive into your console.
+   - For a Wii mini, the USB port is on the back.
+   - For a normal Wii, use the bottom port (or the right port if it's upright).

-3. Enciende la consola.
+3. Power on your console.

 4. Go to `Wii Settings`.

-5. Anota la letra que aparece en la esquina superior derecha, junto a la versión del sistema.
+5. Take note in the top right corner of the letter next to the system version.

-   - Esta letra corresponde a la región del menú de tu consola, que necesitarás saber para los pasos pertinentes.
+   - This letter corresponds to your system menu region, which you will need to know for the corresponding steps.

   ![](/images/wii/SystemMenuVersion.png)

-6. Power off your Wii.
+6. Power off your console.

 #### Rasperry Pi Pico W

@ -206,11 +205,11 @@ A normal Rasperry Pi Pico will not work. It MUST to be the wireless model. Addit
 ### Performing the Exploit

 1. Plug your flashed device back into your PC.
-2. Enciende la consola.
+2. Power on your console.
   - **Do not** connect any Wii Remotes.
 3. Press the Sync button repeatedly until the bluebomb screen shows up.
-   - Podría llevar varios intentos.
-4. Después de unos segundos, la consola debería de iniciar el HackMii Installer.
+   - This could take numerous attempts.
+4. If the exploit was successful, your device will have loaded the HackMii Installer.

 ::: tip

--- a/docs/es_ES/bootmii.md
+++ b/docs/es_ES/bootmii.md
@ -9,11 +9,11 @@ You need an **SD card** to use BootMii at all, but especially to create a NAND b

 :::

-## Requisitos
+## Requirements

 - Una tarjeta SD con al menos 512 MB de espacio libre

-## Instrucciones
+## Instructions

 ::: info

@ -21,7 +21,7 @@ Si has instalado BootMii como boot2, apaga y vuelve a encender la consola para i

 :::

-1. Enciende la consola.
+1. Power on your console.

 2. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/bootmiirecover.md
+++ b/docs/es_ES/bootmiirecover.md
@ -26,7 +26,7 @@ Restoring an unverified NAND backup may lead to a WORSE BRICK. The same also goe

 :::

-## Requisitos
+## Requirements

 - An earlier NAND Backup made by [BootMii](bootmii)

@ -46,7 +46,7 @@ If you want to restore a game's save data, use Dolphin to import your NAND backu

 - You must use the POWER (right) and RESET (select) buttons on your console, or a GameCube controller plugged into port 1. Para navegar con un mando de GameCube, pulsa izquierda/derecha en la cruz de control de un mando de GameCube. Para seleccionar, pulsa A.

-## Instrucciones
+## Instructions

 1. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/bricks.md
+++ b/docs/es_ES/bricks.md
@ -1,12 +1,12 @@
 # Bloqueos

-A "Brick" usually means your Wii has reached a state where, its only use is that of a literal <a href="https://wikipedia.org/wiki/Brick">brick</a>.
+A "Brick" usually means your Wii has reached a state where its next purpose in existence is likely that of a doorstop, or a display figure.

 Bricks can occur for a variety of reasons, however usually it results through corrupted software, or from improper modifications made through homebrew.

-# Prevención de bloqueos
+# Brick Prevention

-Prevenir un bloqueo implica numerosas medidas que oscilan entre el sentido común y la realización de copias de seguridad. A continuación figuran las recomendaciones generales sobre lo que no se debe hacer:
+Preventing a brick involves many rules that range between common sense and fail-safe backups. Here are the general recommendations of what not to do:

 - **Do NOT follow old modding tutorials, use old homebrew, or use video guides on the Internet unless it is EXPLICITLY RECOMMENDED by the homebrew developer.**
 - **Do NOT, under ANY CIRCUMSTANCES, USE THE HOMEBREW APP `Pimp My Wii`. It is DANGEROUS and does things that have the ability to BRICK YOUR CONSOLE!**
@ -16,67 +16,67 @@ Prevenir un bloqueo implica numerosas medidas que oscilan entre el sentido comú
 - **Do NOT attempt region changing methods meant for Wii on the vWii or Wii mini**
 - **Do NOT use a Nintendo Wi-Fi Connection service unless it is known to be RCE patched (such as [Wiimmfi](wiimmfi)). Doing otherwise could allow a malicious actor to BRICK your Console!**
 - **Only install updates for your own region!**.
-  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. Si la región es coreana, ten MUCHO CUIDADO al aplicar actualizaciones a la consola y considera la posibilidad de buscar asistencia para obtener más ayuda.
+  - Installing updates from another region could have no effect at best, but result in a [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick at worst. To prevent this from happening if you bought a pre-owned Wii, run [SysCheck](syscheck) to verify the original region of your console. If it is Korean, be EXTREMELY careful with applying system updates to your console, and consider seeking support for further assistance.
 - **Do NOT delete or modify system files, install old versions of your Wii Menu or IOS, and do NOT install any system file mods unless you know what you are doing!**
  - An example of modifying files going wrong is replacing IOS80 on Wii mini, which may result in a [Wi-Fi Brick](bricks#wi-fi-brick).
 - **Do NOT install homebrew from untrustworthy sources or if the source code is not available.**
  - Software on the [Open Shop Channel](osc) is safe.
-  - Ya se han producido casos de software malintencionado para la Wii, mientras que otras aplicaciones simplemente están mal desarrolladas. Asegúrate de que sabes lo que estás instalando, e instala solo lo que necesites.
+  - There have been incidents of malicious software being developed for the Wii in the past, while other apps are just badly developed. Make sure that you know what you are installing, and only install what you need.
  - Corrupted or unstable forwarders for homebrew could cause a [banner brick](#banner-brick), so try to stick with loading homebrew from the Homebrew Channel unless you really want a forwarder.
 - **Ensure that you know what you are doing when running homebrew apps - especially those with the ability to modify system files. Be ESPECIALLY careful when using applications such as:**
  - AnyTitle Deleter
  - AnyRegion Changer
-  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) brick)
-  - Desactualizadores del firmware
-  - Cualquier otra aplicación que modifique archivos esenciales en la NAND
+  - KoreanKii (secondary cause of [Korean Kii/Error 003](bricks#koreankii-error-003-brick) brick)
+  - Firmware Downgraders
+  - Any other app that modifies critical NAND files
 - **DO NOT TOUCH THE WII'S POWER SOURCE OR POWER BUTTONS WHEN INSTALLING OR MODIFYING CRITICAL SYSTEM CONTENT**.
-  - Si tu corriente eléctrica es inestable (p. ej. una tormenta o un apagón), aplaza lo que estés haciendo hasta que tengas una fuente de alimentación estable.
+  - If your electricity is unstable (e.g. storm, power outage), postpone what you are doing until you have a stable power source.
  - This applies to dangerous processes such as BootMii NAND restoration, which could lead to a [full brick](#low-level-brick) if anything goes wrong.

-En todo caso, siempre deberías:
+In any case, you should absolutely:

- Tener BootMii instalado como boot2 si está disponible, de lo contrario como IOS.
- Tener Priiloader instalado independientemente del método de instalación de BootMii.
- Realizar una copia de seguridad de la NAND con BootMii y tener siempre a mano una de repuesto válida, especialmente antes de intentar algo arriesgado. Ten en cuenta que en algunos contextos de bloqueos no se podrá acceder a BootMii, así que planifica con antelación.
+- Have BootMii installed as boot2 if available, but otherwise as IOS.
+- Have Priiloader installed regardless of BootMii installation method.
+- Backup your NAND with BootMii and always have a valid spare copy on hand, but especially before attempting anything risky. Note that in some brick scenarios, BootMii is not accessible, so plan ahead.

-# Diagnóstico
+# Diagnosis

 This is a section intended to help you diagnose a potential brick, in order by least to most brick severity. If you seem to have a brick that isn't covered in this section or in the guide, please join the Nintendo Homebrew discord server for support.

- Wii menu brick Wii menu brick Ninguna aplicación funciona mal, la Configuración de Wii no tiene errores, todo parece estar correcto. No brick.
- Wii menu brick
+- Wii starts, and progresses to the Wii Menu. No app is malfunctioning, Wii settings is error free, everything is seemingly fine. No brick.
+- Wii starts, and progresses to the Wii Menu.
  - If after acccessing a specific channel, you get `The system files are corrupted.`, see [banner brick](bricks#banner-brick).
  - If after accessing the Wii settings, you see an error that resembles the Opera web browser, see [semibrick](bricks#semibrick).
- La Wii arranca, ves la pantalla de salud y seguridad, pero al pulsar A para arrancar, ves una pantalla negra.
+- Wii starts, you see the health/warning screen, but upon pressing A to start, you see a black screen.
  - If this happened after installing a theme, see [theme brick](bricks#theme-brick).
  - If this happened after installing a WAD, see [banner brick](bricks#banner-brick).
  - If this randomly started happening, and you can access Maintenance Mode by holding +/- on the health/warning screen, see [mail brick](bricks#mail-brick).
 - Wii starts, and you see the health/warning screen, but upon pressing A to start, the screen goes black and/or freezes and does not continue. Maintenance mode is accessible. See [mail brick](bricks#mail-brick).
- La Wii arranca, PERO INSTANTANEAMENTE aparece un error similar al del navegador web Opera. See [Wii Menu/Opera brick](bricks#wii-menuopera-brick).
- Error 003 See [Korean Kii/Error 003 brick](bricks#error-003-brick).
- No pasa nada, pantalla negra, PERO BootMii en el boot2 es accesible. See [IOS brick](bricks#ios-brick).
- No ocurre nada, pantalla en negro, PERO se puede encender la Wii con un mando de Wii o se puede acceder al modo de recuperación. See [Wi-Fi brick](bricks#wi-fi-brick).
- No ocurre nada, pantalla en negro. No se puede encender la Wii con el mando de Wii, no se puede iniciar el modo de recuperación y no se puede acceder a BootMii en el boot2. See [low-level brick](bricks#low-level-brick).
+- Wii starts, BUT you INSTANTLY see an error that resembles the Opera web browser. See [Wii Menu/Opera brick](bricks#wii-menuopera-brick).
+- Error 003. See [Korean Kii/Error 003 brick](bricks#koreankii-error-003-brick).
+- Nothing happens, black screen, BUT BootMii as boot2 is accessible. See [IOS brick](bricks#ios-brick).
+- Nothing happens, black screen, BUT Wii can be turned on with a Wiimote/Recovery Mode can be accessed. See [Wi-Fi brick](bricks#wi-fi-brick).
+- Nothing happens, black screen. Wii cannot be turned on with a Wiimote, Recovery Mode cannot be started, and BootMii as boot2 is not accessible. See [low-level brick](bricks#low-level-brick).

-# Tipos de bloqueos
+# Brick Types

-A continuación, se analizarán los distintos bloqueos de la Wii por orden de gravedad, con sus síntomas, causas y soluciones.
+Here, the different Wii bricks will be discussed in order of severity, with symptoms, causes, and solutions.

-## Semibloqueo
+## Semibrick

-### Síntomas
+### Symptoms

 When navigating to Wii Settings, you instead get an error from the Opera web browser along the lines of `You tried to access the address (URL), which is currently unavailable.` In some cases, some parts of the Wii Settings menu may still be accessible, but other parts may not (such as the Country menu).

-### Causas
+### Cause

-Se produce un semibloqueo cuando se instala un menú de Wii o un tema de otra región. As the Wii Settings menu is rendered using HTML pages with Opera, themes often replace these pages and put them in different directories; essentially leading to a `404 Not Found` error but in the form of a console brick.
+A semibrick occurs when a different region Wii Menu or a different region custom theme is installed. As the Wii Settings menu is rendered using HTML pages with Opera, themes often replace these pages and put them in different directories; essentially leading to a `404 Not Found` error but in the form of a console brick.

 ![](/images/bricks/semibrick.png)

-### Soluciones
+### Solutions

-Comprueba en AnyRegion Changer que la región de tu consola es la misma que la del tema o menú de Wii que tienes instalado.
+Verify in AnyRegion Changer that your console region is the same as the theme or Wii Menu that you have installed.

 If this was caused by a theme you installed, use csm-installer to reinstall the original theme.

@ -84,77 +84,77 @@ If this was caused by a Wii Menu WAD you installed, use [NUS Downloader](https:/

 ::: danger

-Ten cuidado al descargar la WAD del menú de Wii. Asegúrate de elegir la misma versión con la región correcta.
+Be cautious when downloading the Wii Menu WAD. Make sure to pick the same version with the corrected region.

 :::

 If you are actually in the process of a region change, use [ARC-ME](https://github.com/modmii/Any-Region-Changer-ModMii-Edition/releases) to automatically fix all your region settings to match your Wii Menu.

-## Bloqueo de banner
+## Banner brick

-### Síntomas
+### Symptoms

-Al intentar arrancar la Wii, aparece la pantalla de salud y seguridad y, al pulsar A, la pantalla continúa normalmente; sin embargo, pasado este punto, no ocurre nada y la Wii permanece en una pantalla negra. Esto ocurre después de instalar una WAD y reiniciar o volver al menú de Wii. Alternativamente, todavía se puede acceder al menú de Wii, pero al abrir el canal corrupto la consola se congela. En algunos casos, es posible que aparezca la pantalla "Los archivos de sistema están dañados".
+Attempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. This happened after installing a WAD and rebooting, or returning to the Wii Menu. Alternatively, the Wii Menu can still be accessed, but opening the corrupt channel results in the console freezing. In some cases, you may see the "System files are corrupted" screen.

 ![](/images/bricks/sysfiles-corrupted.jpg)

-### Causas
+### Cause

-Los bloqueos de banner ocurren si instalas un archivo WAD que tiene un banner o icono del menú de Wii inválido.
+Banner bricks occur if you install a WAD file that has an invalid Wii Menu banner or icon.

-### Soluciones
+### Solutions

 If you are somehow able to still access the Wii Menu, go into the Homebrew Channel and use [YAWM ModMii Edition](yawmme) or your current WAD manager to uninstall the corrupt channel.

-If you cannot access the Wii Menu, and have [Priiloader](priiloader) installed, enter it by holding RESET while turning your Wii on. Select Homebrew Channel, then use your WAD manager to uninstall the faulty WAD.
+If you cannot access the Wii Menu, and have [Priiloader](priiloader) installed, enter it by holding RESET while turning your Wii on. Select Homebrew Channel, then uninstall the corrupt channel.

-If you don't have Priiloader, Maintenance mode may be worth a try. Hold down `+` and `-` on the Health and Safety screen (do not press `A`!).
+If you don't have or can't access Priiloader, Maintenance mode may be worth a try. Hold down `+` and `-` on the Health and Safety screen (do not press `A`!).

-## Bloqueo de tema
+## Theme brick

-### Síntomas
+### Symptoms

-Al intentar arrancar la Wii, aparece la pantalla de salud y seguridad y, al pulsar A, la pantalla continúa normalmente; sin embargo, pasado este punto, no ocurre nada y la Wii permanece en una pantalla negra. Ocurre después de instalar un tema.
+Attempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. This happened after installing a theme.

-### Causas
+### Cause

-El bloqueo de tema se produce cuando se instala un tema con un formato incorrecto.
+A theme brick occurs when a wrongly formatted theme is installed.

-### Soluciones
+### Solutions

 To resolve this issue, open HBC through Priiloader or BootMii as boot2 and access csm-installer to install a default theme such as the base Wii Menu theme. Alternatively, go into [YAWM ModMii Edition](yawmme) and install the CORRECT default Wii Menu WAD for your region and version.

-## Bloqueo de correo
+## Mail brick

-### Síntomas
+### Symptoms

-Al intentar arrancar la Wii, aparece la pantalla de salud y seguridad y, al pulsar A, la pantalla continúa normalmente; sin embargo, pasado este punto, no ocurre nada y la Wii permanece en una pantalla negra. Maintenance mode is still accessible.
+Attempt to start the Wii - warning/press A screen shows up, and when A is pressed, the screen passes normally; however, beyond this point, nothing happens and the Wii remains on a black screen. Maintenance mode is still accessible.

-### Causas
+### Cause

-A mail brick happens when your Wii has a lot of mail. This will make the Wii crash.
+A mail brick occurs when a Wii has too much mail to handle, or when malformed mail is in the Wii Message Board, causing a crash upon booting through normal means. Because the Wii Message Board is always drawn below Wii channels, this causes the Wii Menu to fail before fully loading.

-### Soluciones
+### Solution

 By entering holding + and - on the warning screen, maintenance mode can be entered, where the Wii Message Board is not loaded at all. If the Homebrew Channel is not installed, follow [Bluebomb](bluebomb).

 From here, the Homebrew Channel can be loaded and the brick can be fixed by deleting Wii Message Board data with [cdbackup](https://oscwii.org/library/app/cdbackup).

-## Wii Menu brick
+## Wii Menu/Opera brick

-### Síntomas
+### Symptoms

 When starting the Wii, you instead get an error from the Opera web browser along the lines of `You tried to access the address (URL), which is currently unavailable.` This will happen every time you start the Wii, and cannot be bypassed by any other means.

-### Causas
+### Cause

 This brick is a more fatal version of a [Semibrick](#semibrick). If your SYSCONF (system configuration file) gets corrupt or damaged, the Wii will regenerate it and start the setup phase.

-Sin embargo, las páginas de la configuración inicial se encuentran en una ubicación similar a las páginas de Configuración de Wii. Si tienes un menú Wii o un tema de una región incorrecta, la consola Wii no podrá encontrarlos.
+However, the setup pages are in a similar location to the Wii settings pages. If you have an incorrect region Wii Menu or theme, the Wii cannot find them.

 ![](/images/bricks/sysmenu-brick.png)

-### Soluciones
+### Solutions

 If you still have [Priiloader](priiloader), use it to enter the Homebrew Channel and re-install the original theme file/original Wii Menu.

@ -164,9 +164,9 @@ Alternatively, [Recovery Mode](recovery-mode) can be used to attempt a fix.

 ## KoreanKii/Error 003 Brick

-### Síntomas
+### Symptoms

-La pantalla se muestra como se indica a continuación en el arranque normal.
+Screen shows up as listed below on normal boot.

 ```
 Error:003
@ -175,80 +175,80 @@ unauthorized device has been detected.

 ![](/images/bricks/error-003.png)

-### Causas
+### Cause

-Al publicar la Wii en Corea, Nintendo cambió la clave de cifrado de estas consolas como un último esfuerzo para impedir el homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is <strong x-id="1">not</strong> Korean.
+When releasing the Korean Wiis, Nintendo changed the encryption key for these units specifically as a last ditch attempt at preventing homebrew. While this failed at its intended goal, Nintendo also left a check in the System Menu versions 4.2/4.3 to determine whether or not the Korean Key is present on a system software region that is **not** Korean. If this check succeeds, the error triggers and the Wii is effectively bricked.

 This is usually an immediate follow-up to a Wii System Update on an unsuspecting region-changed Korean Wii.

-### Soluciones
+### Solutions

-Como este bloqueo suele producirse después de las actualizaciones del menú de Wii, Priiloader no se encontrará presente. In the case that Priiloader is present, you can simply fix it by either installing the previous Wii System Menu or removing the key with the KoreanKii homebrew app.
+Since this brick most often occurs after the Wii Menu updates, Priiloader will not be present. In the case that Priiloader is present, you can simply fix it by either installing the previous Wii System Menu or removing the key with the KoreanKii homebrew app.

 Korean Wiis also released with Wii Menu 3.3, around the time that Nintendo [fixed the Trucha bug in boot1](https://wiibrew.org/wiki/3.3#Changes), so BootMii as Boot2 cannot be installed to or used on any Korean Wii.

 While this leaves the Wii in a particularly dangerous situation, **it is still fixable**. This involves going into [Recovery Mode](recovery-mode), where an exploit can be triggered in order to gain access to the Homebrew Channel and revert the conditions that caused the brick. Note that you must have a drivechip in order for this method to work.

-## Bloqueo de IOS
+## IOS brick

-### Síntomas
+### Symptoms

-Este bloqueo parecerá idéntico a uno total debido a un fallo del menú de Wii a través de la IOS; sin embargo, no existe una corrupción total de la NAND ni un fallo de hardware de bajo nivel.
+This brick will appear identical to a low-level brick due to a Wii Menu failure via IOS; however there is not a full low-level NAND corruption, or a low-level hardware failure.

-### Causas
+### Cause

 This brick most often happens when the Wii Menu's IOS is a [stub](http://wiibrew.org/wiki/Stub_IOS), or if the wrong kind of IOS is installed to the console. A stubbed system menu IOS is usually the consequence of attempting to downgrade your Wii menu. If this error began happening after installing a normal IOS80 to a Wii mini, see [Wi-Fi brick](bricks#wi-fi-brick).

-### Soluciones
+### Solutions

 You must have BootMii as boot2 to fix this.

-Puedes o restaurar una copia de seguridad de la NAND, o hacer esto:
+You can either restore a NAND backup, or do this:

 1. Use [NUS Downloader](https://wiibrew.org/wiki/NUSD) to pack a WAD of your original Wii Menu.
-2. Utiliza BootMii para entrar en el Canal Homebrew, y utiliza un gestor de WAD para instalar la WAD del menú de Wii.
+2. Use BootMii to enter the Homebrew Channel, and use a WAD manager to install the Wii Menu WAD.

 For vWii, See [Recover a vWii IOS/Channel](https://wiiu.hacks.guide/#/recover-vwii-ioses-channels)

-## Bloqueo de wifi
+## Wi-Fi brick

-### Síntomas
+### Symptoms

-The only way to fix this brick is a way to launch homebrew by launching a game through the Recovery Menu. It's only accessible if you take apart a GameCube controller to hold all 4 +Control Pad buttons down while the GameCube controller's plugged into the 4th slot on your Wii as it's turned on.
+This brick appears identical to a low-level brick, however you can still power on the Wii with a Wiimote, and you can still boot into Recovery Mode on an original revision Wii.

-### Causas
+### Cause

-Este problema surge cuando el módulo wifi (o Bluetooth) de la Wii se estropea o no está bien insertado. En estos casos, la Wii se queda atascada en una pantalla negra mientras espera una respuesta de la IOS.
+This brick arises when your Wii's Wi-Fi (or Bluetooth) module is damaged or not inserted properly. In such cases, the Wii gets stuck on a black screen while awaiting a response from IOS.

-This will also happen on the Wii Mini if you install a normal Wii IOS, because the Wii Mini doesn't have a Wi-Fi module.
+This will also happen on the Wii mini if you install a normal Wii IOS, because the Wii mini doesn't have a Wi-Fi module.

-### Soluciones
+### Solutions

-Para resolver este problema, puedes intentar volver a colocar o sustituir el módulo wifi/Bluetooth.
+To resolve this problem, you can try to reseat or replace the Wi-Fi/Bluetooth module.

-If you are on a Wii Mini, you must install a Wi-Fi module.
+If you are on a Wii mini, you must install a Wi-Fi module.

 If both fail, see [low-level brick](bricks#low-level-brick).

-## Bloqueo de bajo nivel
+## Low-level brick

-### Síntomas
+### Symptoms

-Pantalla completamente negra, sin respuesta a la intervención del usuario. El modo de recuperación no se puede arrancar, tampoco BootMii como boot2 (o nunca ha existido en primer lugar), prácticamente la consola parece estar muerta.
+Completely black screen, no response to user input. Recovery Mode cannot be booted, neither can BootMii as boot2 (or it never existed in the first place), for all intents and purposes the console appears dead.

-### Causas
+### Cause

-This brick occurs when boot1/boot2 is corrupt.
+This brick occurs when boot1/boot2 is corrupt, or if there is a hardware failure.

-### Soluciones
+### Solutions

-En primer lugar, se debe determinar si el culpable es el hardware. En el orden indicado, haz lo siguiente:
+First, troubleshooting must be done to determine if hardware is at fault. In the order listed, do the following:

- Asegúrate de que la consola Wii sigue funcionando (acepta discos con normalidad, el lector gira correctamente y los mandos de Wii se conectan) antes de seguir los siguientes pasos. If this is the case and only video is not being displayed, you may have a bad video cable, or an exceptionally rare failure of the video port or the GPU.
- If on a Wii mini, and if a normal IOS80 was installed, see [Wi-Fi brick](bricks#wi-fi-brick). Si los pasos para resolver el bloqueo de wifi no funcionan, continúa.
+- Test to make sure that your Wii actually still functions (it accepts discs as normal, spins up correctly, Wiimotes connect) before attempting the following steps. If this is the case and only video is not being displayed, you may have a bad video cable, or an exceptionally rare failure of the video port or the GPU.
+- If on a Wii mini, and if a normal IOS80 was installed, see [Wi-Fi brick](bricks#wi-fi-brick). If steps to resolve the Wi-Fi brick failed, proceed.
 - Attempt to boot into [Recovery Mode](recovery-mode) (normal Wiis only). If the Wii boots into Recovery Mode, see [Wi-Fi brick](bricks#wi-fi-brick) or [IOS brick](bricks#ios-brick). If steps to resolve the Wi-Fi brick or IOS brick failed, proceed.
- Vuelve a colocar la unidad de disco e intenta arrancar normalmente. Si sigue sin funcionar, sustituye el lector de discos. Si sigue sin funcionar, continúa.
- Llegados a este punto, o hay una corrupción de bajo nivel en boot0/boot1, un fallo del chip de la NAND, o un fallo de hardware en general desconocido. Pide ayuda en línea o compra otra Wii.
+- Reseat the disc drive and attempt to boot normally. If still unsuccessful, replace the disc drive. If still unsuccessful, proceed.
+- At this point, either there is a low level boot0/boot1 corruption, a NAND chip failure, or there is a wider unknown hardware failure. Consider consulting online help or buying another Wii.

 ::: tip

--- a/docs/es_ES/cios-mini.md
+++ b/docs/es_ES/cios-mini.md
@ -28,22 +28,22 @@ Do not attempt to install a Wii/vWii IOS or System Menu on the Wii mini. Doing s

 :::

-## Requisitos
+## Requirements

 - Una Wii mini con el Canal Homebrew instalado
 - Una unidad USB
 - Leseratte's [d2xl cIOS Installer](/assets/files/d2xl_wii_mini_cIOS_installer_v1_beta2.zip)

-## Instrucciones
+## Instructions

 ### Sección I - Descarga

-1. Power off your Wii.
+1. Power off your console.
 2. Inserta la unidad USB o tarjeta SD en tu PC.
 3. Create a folder named `apps` on the root of your USB drive if it does not already exist.
 4. Copy the `d2x-cios-installer` folder from the d2xl cIOS Installer `.zip` to the `apps` folder on your USB drive.
 5. Reinsert your USB drive into your console.
-6. Enciende la consola.
+6. Power on your console.
 7. Launch the Homebrew Channel, and launch the Load Priiloader app.
 8. Launch d2xl cIOS Installer from the list of homebrew.

--- a/docs/es_ES/cios-vwii.md
+++ b/docs/es_ES/cios-vwii.md
@ -22,7 +22,7 @@ Do not attempt to install a Wii/Wii mini IOS or System Menu on the vWii. Doing s

 :::

-## Requisitos
+## Requirements

 - A Wii U with the Homebrew Channel installed on the vWii
 - Una tarjeta SD
@ -34,7 +34,7 @@ Si vas a usar una tarjeta SD, asegúrate de que no esté protegida contra escrit

 :::

-## Instrucciones
+## Instructions

 ### Section I - Installing

--- a/docs/es_ES/cios.md
+++ b/docs/es_ES/cios.md
@ -6,7 +6,7 @@ cIOS (Custom IOS) are IOS that are patched to allow custom functionality. While

 :::

-## Requisitos
+## Requirements

 ::: warning

@ -22,7 +22,7 @@ If you have a Wii mini, follow [this guide](cios-mini) instead.
 - Una tarjeta SD o unidad USB
 - [d2x cIOS Installer](/assets/files/d2x-cios-installer.zip)

-## Instrucciones
+## Instructions

 ### Sección I - Descarga

@ -38,7 +38,7 @@ If you are able to connect your Wii to the internet, you may skip to [Section II

 :::

-1. Power off your Wii.
+1. Power off your console.
 2. Extract both apps to the root of your SD card or USB drive.
 3. On your computer, download [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
 4. Copy all files from the NUS Downloader `.zip` to a folder on your computer.
@ -67,7 +67,7 @@ The WAD files should be on your SD card like this:

 2. Elige el dispositivo de almacenamiento adonde deseas copiar el juego: unidad USB o tarjeta SD.

-3. Enciende la consola.
+3. Power on your console.

 4. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/dump-games.md
+++ b/docs/es_ES/dump-games.md
@ -4,14 +4,14 @@ This guide covers dumping GameCube or Wii game discs to a local SD card or USB d

 ## Dumping a Disc to SD/USB (CleanRip)

-### Requisitos
+### Requirements

 - Una tarjeta SD o unidad USB con al menos 4.7 GB de espacio libre (8.5 GB para discos de doble capa).
 - [CleanRip](https://oscwii.org/library/app/cleanrip)

 ### Preparation

-1. Power off your Wii.
+1. Power off your console.

 2. Extract both apps to the root of your SD card or USB drive.

@ -19,7 +19,7 @@ This guide covers dumping GameCube or Wii game discs to a local SD card or USB d

 4. Elige el dispositivo de almacenamiento adonde deseas copiar el juego: unidad USB o tarjeta SD.

-5. Enciende la consola.
+5. Power on your console.

 6. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/dump-wads.md
+++ b/docs/es_ES/dump-wads.md
@ -2,14 +2,14 @@

 En esta guía aprenderás a extraer canales instalados en la memoria de la consola en forma de archivos WAD.

-## Requisitos
+## Requirements

 - Una tarjeta SD o unidad USB
 - [Yet Another BlueDump MOD](https://oscwii.org/library/app/Yet-Another-BlueDump-Mod)

-## Instrucciones
+## Instructions

-1. Power off your Wii.
+1. Power off your console.

 2. Extract both apps to the root of your SD card or USB drive.

@ -17,7 +17,7 @@ En esta guía aprenderás a extraer canales instalados en la memoria de la conso

 4. Elige el dispositivo de almacenamiento adonde deseas copiar el juego: unidad USB o tarjeta SD.

-5. Enciende la consola.
+5. Power on your console.

 6. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/faq.md
+++ b/docs/es_ES/faq.md
@ -42,7 +42,7 @@ If you get error FORE000006, your Wii's clock is probably set incorrectly. See [

 ### ¿Cómo puedo eliminar el control parental?

-The [mkey generator](https://mkey.eiphax.tech/) can generate the code required to remove parental controls.
+The [mkey generator](https://mkey.nintendohomebrew.com/) can generate the code required to remove parental controls.

 ### ¿Cuáles son las modificaciones que pueden causar un brick del modo Wii (vWii) en la Wii U?

--- a/docs/es_ES/flashhax.md
+++ b/docs/es_ES/flashhax.md
@ -2,16 +2,16 @@

 FlashHax es un exploit para la Wii original que se activa mediante el Canal Internet. A diferencia de otros exploits, este no requiere una tarjeta SD.

-## Requisitos
+## Requirements

 - Una Wii con conexión a internet
 - Canal Internet

-## Instrucciones
+## Instructions

 ### Section I - Prep Work

-1. Enciende la consola.
+1. Power on your console.

 2. Launch the Internet Channel.

@ -39,7 +39,7 @@ FlashHax es un exploit para la Wii original que se activa mediante el Canal Inte

   ![](/images/exploits/flashhax/wait-for-download.png)

-3. Después de unos segundos, la consola debería de iniciar el HackMii Installer.
+3. If the exploit was successful, your device will have loaded the HackMii Installer.
   - This may take multiple tries.
   - Si HackMii Installer no carga y el sistema se congela (si no puedes mover el cursor), por favor reinicia tu consola y repite el paso 3 hasta que funcione. Esto puede tomar varios intentos, por favor ten paciencia.

--- a/docs/es_ES/gc-backups.md
+++ b/docs/es_ES/gc-backups.md
@ -2,7 +2,7 @@

 This guide provides instructions on how to manage your GameCube backups, using GameCube Backup Manager. It functions similar to [Wii Backup Manager](wii-backups#using-wii-backup-manager).

-## Requisitos
+## Requirements

 - Una tarjeta SD o unidad USB
 - [GameCube Backup Manager](https://github.com/AxionDrak/GameCube-Backup-Manager/releases)
@ -19,7 +19,7 @@ Asegúrate de que tu unidad USB o tarjeta SD esté formateada como FAT32. No es

 :::

-## Instrucciones
+## Instructions

 ### Sección I - Descarga

--- a/docs/es_ES/gcsaves.md
+++ b/docs/es_ES/gcsaves.md
@ -10,7 +10,7 @@ Use of any GameCube peripheral with a Family Edition Wii or Wii Mini require sol

 ## Uploading an Individual Save (.gci File) to a Physical Memory Card

-### Requisitos
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
@ -28,7 +28,7 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 :::

-### Instrucciones
+### Instructions

 #### Descarga/instalación

@ -60,13 +60,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Backing Up A Save (.gci File) to an SD or USB From a Physical Memory Card

-### Requisitos
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Instrucciones
+### Instructions

 #### Descarga/instalación

@ -98,13 +98,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Backing Up Your Physical Memory Card Into an Emulated Memory Card (.raw file)

-### Requisitos
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Instrucciones
+### Instructions

 #### Descarga/instalación

@ -127,13 +127,13 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Restoring an Emulated Memory Save to a Physical Memory Card

-### Requisitos
+### Requirements

 - A Wii with GameCube ports
 - An SD Card or USB
 - [GCMM](https://oscwii.org/library/app/gcmm)

-### Instrucciones
+### Instructions

 1. If you are trying to restore a save from Dolphin, go to the `File` tab in Dolphin, select open user folder, open the GC folder, and find the `.raw` file.

@ -155,12 +155,12 @@ If you are looking for save game exploits for booting into [Swiss](https://githu

 ## Transferring Saves Between 2 Physical Memory Cards

-### Requisitos
+### Requirements

 - A Wii with GameCube ports
 - At least 2 physical memory cards

-### Instrucciones
+### Instructions

 1. Insert both memory cards into the Wii.

--- a/docs/es_ES/hackmii.md
+++ b/docs/es_ES/hackmii.md
@ -10,13 +10,13 @@ It is also safe to [redo any exploit](get-started) to get back into the HackMii

 ## Iniciar desde el Canal Homebrew

-### Requisitos
+### Requirements

 - El Canal Homebrew
 - Una tarjeta SD o unidad USB formateada como FAT32
 - [HackMii Installer v1.2](https://bootmii.org/download/)

-### Instrucciones
+### Instructions

 1. Inserta la tarjeta SD o unidad USB en tu PC.
 2. Extract the HackMii Installer v1.2 to the `apps` folder on your SD/USB.
@ -32,7 +32,7 @@ It is also safe to [redo any exploit](get-started) to get back into the HackMii

 ## Iniciar desde Priiloader

-### Requisitos
+### Requirements

 - Una Wii con Priiloader (o Preloader) instalado
 - Una tarjeta SD o unidad USB formateada como FAT32
@ -50,7 +50,7 @@ Preloader and older versions of Priiloader do not seem to support SDHC (>2GB) ca

 :::

-### Instrucciones
+### Instructions

 1. Inserta la tarjeta SD o unidad USB en tu PC.
 2. Copy the `boot.elf` file inside the HackMii Installer v1.2 `.zip` to the root of your SD card or USB drive.
--- a/docs/es_ES/hbc-mini.md
+++ b/docs/es_ES/hbc-mini.md
@ -2,7 +2,7 @@

 El Canal Homebrew te permite utilizar las aplicaciones homebrew que descargues.

-## Instrucciones
+## Instructions

 ::: warning

--- a/docs/es_ES/hbc.md
+++ b/docs/es_ES/hbc.md
@ -13,7 +13,7 @@ You can always [install it later](hackmii).

 :::

-## Instrucciones
+## Instructions

 1. Your console should be powered on and showing the HackMii Installer from the previous part of the guide.

--- a/docs/es_ES/homebrew-dolphin.md
+++ b/docs/es_ES/homebrew-dolphin.md
@ -2,13 +2,13 @@

 On Dolphin Emulator version `5.0-4588` or later, the Wii Menu can be easily installed through Dolphin itself. Once this is done, the Homebrew Channel can be installed, although not in the same manner as a physical Wii.

-## Requisitos
+## Requirements

 - A Windows/MacOS/Linux computer with an Internet connection
 - [Dolphin Emulator](https://dolphin-emu.org/download/) version `5.0-4588` or later
 - The latest version of [Open Homebrew Channel](https://github.com/Wii-Mini-Hacking/hbc/releases)

-## Instrucciones
+## Instructions

 1. If you have not already done so, install the Wii Menu on Dolphin Emulator by going to `Tools > Perform System Update`.

--- a/docs/es_ES/index.md
+++ b/docs/es_ES/index.md
@ -55,7 +55,7 @@ This guide aims to do the following, including optional sections:
 - **This guide applies to retail/consumer Wiis ONLY!** This means that development units are not covered.
 - Depending on what you intend to do with your modded Wii, you may have to make some modifications to the system memory that have a risk of bricking (rendering the console inoperable). As long as you follow this guide exactly, you should be fine, but for general brick prevention tips see [this](bricks#brick-prevention) page.
 - The differences between the Wii and Wii mini are quite significant. This means that in some cases, something that is normally harmless to the Wii could cause a [severe brick](bricks#wi-fi-brick) to the Wii mini. Tread carefully if you are planning to mod one!
- Be extremely careful when modifying a [Korean Wii](bricks#korean-kiierror-003-brick).
+- Be extremely careful when modifying a [Korean Wii](bricks#koreankii-error-003-brick).

 ## ¿Estás listo?

--- a/docs/es_ES/letterbomb.md
+++ b/docs/es_ES/letterbomb.md
@ -14,21 +14,21 @@ Do NOT use any of the MAC address examples shown in this guide, as they will sim

 :::

-## Requisitos
+## Requirements

 - An SD card formatted as FAT32 that is 32GB or less
 - Una Wii con la versión del sistema 4.3
 - A Windows/MacOS/Linux computer with an Internet connection

-## Instrucciones
+## Instructions

-1. Enciende la consola.
+1. Power on your console.

 2. Go to `Wii Settings`.

-3. Anota la letra que aparece en la esquina superior derecha, junto a la versión del sistema.
+3. Take note in the top right corner of the letter next to the system version.

-   - Esta letra corresponde a la región del menú de tu consola, que necesitarás saber para los pasos pertinentes.
+   - This letter corresponds to your system menu region, which you will need to know for the corresponding steps.
   - Also, ensure that you are on System Menu version 4.3.

   ![](/images/wii/SystemMenuVersion.png)
@ -67,7 +67,7 @@ Do NOT use any of the MAC address examples shown in this guide, as they will sim
    - Si el sistema se congela después de seleccionar la carta, es probable que hayas elegido la región incorrecta al momento de descargar los archivos del exploit. Repite el paso 2 al comienzo de la guía y selecciona la región correcta, luego continúa con el resto de pasos.
    - If all is correct and there is freezing, keep on trying until it works.

-16. Después de unos segundos, la consola debería de iniciar el HackMii Installer.
+16. If the exploit was successful, your device will have loaded the HackMii Installer.

 ![](/images/exploits/letterbomb/LetterBomb-Wii.png)

--- a/docs/es_ES/modmii.md
+++ b/docs/es_ES/modmii.md
@ -46,7 +46,7 @@ The chart below will help you determine what can be done in either interface.

 :::details Click here for a detailed explanation of each tool.

-| Tool                                                                                                           | Descripción                                                                                                                                                                                                                                                                                                       |
+| Tool                                                                                                           | Description                                                                                                                                                                                                                                                                                                       |
 | -------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | W = ModMii Wizard <-- Start Here to Mod Your Wii!                                     | This option can be used to hack your Wii for the first time or re-hack a Wii that has been previously modded.                                                                                                                                                                                     |
 | SU = SysCheck Updater Wizard (update only your outdated softmods)                           | This option checks for and updates old modifications installed to their wii such as DarkCorp/CIOSSPAGHETTI that can potentially cause problems for the latest homebrew custom firmware.                                                                                                           |
@ -71,10 +71,10 @@ When using ModMii, it is important to note that it will generate a custom guide

 ## Installing ModMii

-### Requisitos
+### Requirements

 - Una consola Wii
- Una unidad USB o tarjeta SD
+- A USB drive or SD Card
 - A Windows PC (a Virtual Machine will work)
 - [ModMii](https://modmii.github.io/)

--- a/docs/es_ES/osc.md
+++ b/docs/es_ES/osc.md
@ -12,13 +12,13 @@ There are two methods to use the Open Shop Channel: on your Wii through Homebrew

 ## Method I - Homebrew Browser

-### Requisitos
+### Requirements

 - A homebrewed Wii with an active Internet connection
 - Una tarjeta SD o unidad USB
 - [Homebrew Browser](https://oscwii.org/library/app/homebrew_browser)

-### Instrucciones
+### Instructions

 1. Download the recommended `.zip` file from the Open Shop Channel website.

@ -30,7 +30,7 @@ There are two methods to use the Open Shop Channel: on your Wii through Homebrew

 ## Method II - OSCDL

-### Requisitos
+### Requirements

 - A Windows/macOS/Linux computer with an internet connection
 - Una tarjeta SD o unidad USB
--- a/docs/es_ES/priiloader.md
+++ b/docs/es_ES/priiloader.md
@ -4,7 +4,7 @@

 Additionally, it can be used to quickly launch any Title or Homebrew, or change the way Wii autoboots.

-## Requisitos
+## Requirements

 - Una tarjeta SD o unidad USB
 - [Priiloader Installer](https://oscwii.org/library/app/priiloader) (the `.zip` file)
@ -16,11 +16,11 @@ Additionally, it can be used to quickly launch any Title or Homebrew, or change
 - [Priiloader Wii U Forwarder](https://github.com/DacoTaco/priiloader/releases/download/0.10.0/PriiloaderWiiUForwarder.zip) (direct download)
  - [Aroma](https://wiiu.hacks.guide/#/aroma/getting-started) must be installed on your console for Priiloader Wii U Forwarder to function.

-## Instrucciones
+## Instructions

 ### Section I - Prep Work

-1. Power off your Wii.
+1. Power off your console.
 2. Extract both apps to the root of your SD card or USB drive.
 3. Copy the `apps` folder from the LoadPriiloader `.zip` to the root of your SD card or USB drive.
 4. Copy the `apps` folder from the priiloader `.zip` to the root of your SD card or USB drive.
@ -29,7 +29,7 @@ Additionally, it can be used to quickly launch any Title or Homebrew, or change

 ### Sección II - Instalación

-1. Enciende la consola.
+1. Power on your console.

 2. Launch the Homebrew Channel, and launch the Load Priiloader app.

--- a/docs/es_ES/recommended-homebrew.md
+++ b/docs/es_ES/recommended-homebrew.md
@ -9,7 +9,7 @@ Homebrew that has the ability to make permanant changes to your Wii are highligh
 - [**YAWM ModMii Edition**](https://oscwii.org/library/app/yawmME) - An extensively supported WAD manager with additional features. Recommended over any other WAD manager due to its extensive anti-brick protection.
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME) - A homebrew application which checks information about your Wii and pastes it back in a readable, sendable format. Think of it like a "System Information" app but for the Wii.
 - [**CDBackup**](https://oscwii.org/library/app/cdbackup) - Backup, restore, and delete Wii Message Board data.
- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#korean-kiierror-003-brick) so **only use this app if you know what you are doing**.
+- [**AnyRegion Changer ME**](https://oscwii.org/library/app/ARCME) - ModMii edition of AnyRegion Changer. While a powerful tool for changing region settings, it can also lead to severe bricks like [Korean Kii/Error 003](bricks#koreankii-error-003-brick) so **only use this app if you know what you are doing**.
 - [**WiiXplorer-SS**](https://oscwii.org/library/app/wiixplorer-ss) - A modified and updated version of WiiXplorer. A file manager for the Wii, it allows you to view and customize files both on an SD card, a USB device, and the internal Wii memory. For this reason it is a very powerful but also dangerous tool - don't modify files on the system NAND unless you know what you are doing, as it can lead to various types of [bricks](bricks).
 - [**SaveGame Manager GX**](https://oscwii.org/library/app/SaveGame_Manager_GX) - A savegame/Mii extractor for the Wii. It supports GameCube memory cards (physical and virtual), emuNANDs, normal and protected saves, themes, and more.
 - [**csm-installer**](https://oscwii.org/library/app/csm-installer) - An application that allows you to theme the Wii Menu. While quite useful to make your Wii unique, it also has the ability to cause a [minor brick](bricks#theme-brick), so make sure to read our [theme guide](themes) for safe usage instructions.
--- a/docs/es_ES/recovery-mode.md
+++ b/docs/es_ES/recovery-mode.md
@ -13,7 +13,7 @@ This check can be bypassed using Priiloader, which allows Recovery Mode to boot

 ## Accessing and Using Recovery Mode

-### Requisitos
+### Requirements

 - A GameCube controller
 - If the Diagnostic Disc Check was previously removed with Priiloader, or if a drive chip is on hand:
--- a/docs/es_ES/str2hax.md
+++ b/docs/es_ES/str2hax.md
@ -14,17 +14,17 @@ If you have installed a mod like CTGP Revolution or Project+, str2hax may load t

 :::

-## Requisitos
+## Requirements

 - Una Wii con conexión a internet

-## Instrucciones
+## Instructions

 ### Section I - Connecting

 Este exploit requiere que cambies tu configuración de DNS para poder conectarte al servidor que contiene el exploit.

-1. Enciende la consola.
+1. Power on your console.

 2. Go to `Wii Options`.

@ -90,7 +90,7 @@ Este exploit requiere que cambies tu configuración de DNS para poder conectarte

 4. Give the exploit 1-2 minutes to download (and don't press `I ACCEPT`/`I DO NOT ACCEPT`).

-5. Después de unos segundos, la consola debería de iniciar el HackMii Installer.
+5. If the exploit was successful, your device will have loaded the HackMii Installer.

   ![](/images/hackmii/scam.png)

--- a/docs/es_ES/syscheck.md
+++ b/docs/es_ES/syscheck.md
@ -2,12 +2,12 @@

 Un SysCheck es un diagnóstico que proporciona información sobre todos los IOS y cIOS que están instalados en tu consola. Tambien recopila otros datos útiles sobre el sistema. Cuando tienes problemas con los IOS de tu consola, es posible que debas realizar un SysCheck al momento de solicitar apoyo a alguien.

-## Requisitos
+## Requirements

 - Una tarjeta SD o unidad USB
 - [SysCheck ModMii Edition](https://oscwii.org/library/app/SysCheckME)

-## Instrucciones
+## Instructions

 ### Sección I - Descarga/instalación

--- a/docs/es_ES/themes.md
+++ b/docs/es_ES/themes.md
@ -41,7 +41,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file
 - [GBAtemp Other Files for Wii](https://gbatemp.net/download/categories/other-files.166/) (.mym file distribution)
 - [Wii Themer](http://www.wiithemer.org/) (This site can build a .csm ready to install for Wii and vWii only, but for Wii mini you may download the .mym files from their [Theme Database](http://wiithemer.org/mym/))

-### Requisitos
+### Requirements

 - Extract MyMenuifyMod.zip to your SD card or USB drive.
 - A Windows PC with an Internet connection
@ -52,7 +52,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::: tabs

-:::: tab csm-installer
+:::: tab (All) Via csm-installer

 1. Extract the csm-installer `.zip` file to the root of your SD card or USB device.
 2. Insert your SD card or USB device into your console, and launch the Homebrew Channel.
@ -62,7 +62,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-wii
+:::: tab (Wii) Via NUS Downloader

 1. On your computer, download [NUS Downloader](https://github.com/WiiDatabase/nusdownloader/releases/latest/download/NUSD-Mod-NUS-Fix.zip).
 2. Copy all files from the NUS Downloader `.zip` to a folder on your computer.
@ -79,7 +79,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab nus-downloader-vwii
+:::: tab (vWii) Via NUS Downloader

 1. On your computer, download [NUS Downloader (vWii)](/assets/files/NUSDownloader-vwii.zip)
 2. Copy all files from the vWii NUS Downloader `.zip` to a folder on your computer.
@ -110,7 +110,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 ::::

-:::: tab thememii
+:::: tab (Wii) Via ThemeMii

 1. Create a `themes` folder on the root of your SD card/USB device.
 2. Extract the ThemeMii MOD `.zip` to a location on your PC.
@ -147,7 +147,7 @@ Before proceeding, it helps to know the difference between .MYM and .CSM as file

 Unfortunately, because of the codebase difference between the original WiiFlow and the newer WiiFlow Lite, themes are sparse - in fact, only one theme could be found that confidently works on the newer version. The instructions for installing that theme are below.

-### Requisitos
+### Requirements

 - Una consola Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
@ -155,7 +155,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a
 - Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras <a href="https://discord.gg/rc24">el servidor Discord de RiiConnect24</a> (recomendado) o <a href="mailto:support@riiconnect24.net">envias un correo electronico a support@riiconnect24.net</a>.
 - [Rhapsodii Shima](https://gbatemp.net/threads/rhapsodii-shima-5-4.555062/)

-### Instrucciones
+### Instructions

 1. Algunos temas tienen enlaces para diferentes regiones, así que elige el que corresponda con la región de tu consola.
 2. Download the Rhapsodii Shima archive, either version of the theme works and can be installed side-by-side with no issues.
@ -164,7 +164,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a

 ## USB Loader GX Theming

-### Requisitos
+### Requirements

 - Una consola Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
@ -172,7 +172,7 @@ Unfortunately, because of the codebase difference between the original WiiFlow a
 - Si necesitas ayuda con cualquier cosa en este tutorial, por favor entras <a href="https://discord.gg/rc24">el servidor Discord de RiiConnect24</a> (recomendado) o <a href="mailto:support@riiconnect24.net">envias un correo electronico a support@riiconnect24.net</a>.
 - A [theme](https://gbatemp.net/threads/dark-wii-usb-loader-gx-themes.584493/), this link contains an assortment of dark themes

-### Instrucciones
+### Instructions

 1. Download a theme `.zip` file from the website linked above, or anywhere else you can get a proper theme.
 2. Unpack the `.zip` file's contents into the `apps\usbloader_gx` directory on the storage device where you installed USB Loader GX.
@ -182,14 +182,14 @@ Unfortunately, because of the codebase difference between the original WiiFlow a

 ## Homebrew Channel Theming

-### Requisitos
+### Requirements

 - Una consola Wii
 - Extract MyMenuifyMod.zip to your SD card or USB drive.
 - Una computadora con Windows (o usando Mono o Wine en Mac/Linux)
 - A [theme](https://wiibrew.org/wiki/Homebrew_Channel/Themes) from WiiBrew

-### Instrucciones
+### Instructions

 1. Download a theme `.zip` file from the website linked above.

--- a/docs/es_ES/update.md
+++ b/docs/es_ES/update.md
@ -8,7 +8,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.

 :::

-## Requisitos
+## Requirements

 - a Wii with The Homebrew Channel 1.0.8 or later
  - If you do not have the Homebrew Channel or it is out of date, please [start here](get-started) to (re)install it first.
@ -18,7 +18,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.
 - [Priiloader](priiloader)
 - [YAWM ModMii Edition](https://oscwii.org/library/app/yawmme)

-## Instrucciones
+## Instructions

 ### Sección I - Descarga

@ -39,7 +39,7 @@ It is much safer to use [ModMii](modmii) (Windows only) to update your Wii to 4.

 ### Sección II - Instalación

-1. Power off your Wii. Start holding RESET, then turn it back on.
+1. Power off your console. Start holding RESET, then turn it back on.
 2. In the Priiloader menu, select `Homebrew Channel`.
   - If the Priiloader menu does not appear, please [install it immediately](priiloader). Priiloader is required for this guide.
 3. Launch YAWM ModMii Edition.
--- a/docs/es_ES/vwii-homebrew-channel-no-wiiu-mods.md
+++ b/docs/es_ES/vwii-homebrew-channel-no-wiiu-mods.md
@ -2,7 +2,7 @@

 This page will guide you through the process of installing the Homebrew Channel to the vWii without modding the Wii U side.

-## Instrucciones
+## Instructions

 ### Section I - Booting into Aroma

--- a/docs/es_ES/vwii-homebrew-channel.md
+++ b/docs/es_ES/vwii-homebrew-channel.md
@ -18,7 +18,7 @@ Otherwise, proceed to [Installing Aroma](https://wiiu.hacks.guide/#/aroma/gettin

 :::

-## Requisitos
+## Requirements

 - A modded Wii U
 - The [Aroma Environment](https://aroma.foryour.cafe/)
@ -31,7 +31,7 @@ If the evWii Aroma plugin is not installed, and a homebrew app hangs, the only w

 :::

-## Instrucciones
+## Instructions

 ### Section I - Files

--- a/docs/es_ES/wii-backups.md
+++ b/docs/es_ES/wii-backups.md
@ -10,7 +10,7 @@ Si deseas guardar múltiples juegos, te recomendamos adquirir un disco duro exte

 ::: info

-No se recomienda usar una memoria USB, ya que su capacidad por lo general es limitada y pueden variar en funcionalidad incluso entre unidades del mismo modelo.
+A flash drive is not recommended, as they are small and may vary in behavior even between the same product.

 As an alternative, you may simply use an SD card, however the Wii's SD card slot will be slow.

@ -50,7 +50,7 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

   ![](/images/desktop-apps/WBM/filemd5.png)

-### Instrucciones para macOS y Linux
+### macOS/Linux

 1. Copy the files that share the same name and end with `.partX.iso` into an empty folder on your computer.

@ -66,19 +66,19 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Manager

-### Requisitos
+### Requirements

- Una PC con Windows instalado
- Una unidad USB o tarjeta SD
+- A PC running Windows
+- A USB drive or SD card
 - A dumped ISO from a Wii game disc
 - [Wii Backup Manager](https://static.wiidatabase.de/Wii-Backup-Manager.zip)

-### Instrucciones
+### Instructions

 #### Section I - Installation

-1. Extrae el archivo de Wii Backup Manager recién descargado y ejecuta el programa.
-2. Inserta la unidad USB o tarjeta SD en tu PC.
+1. Extract Wii Backup Manager, and launch the program.
+2. Insert your USB drive or SD card into your computer.

 #### Section II - Copying Games

@ -102,15 +102,15 @@ If your disc was dumped to a FAT32 device, you should have gotten at least two f

 ## Using Wii Backup Fusion

-### Requisitos
+### Requirements

 - A PC running MacOS or Linux
- Una unidad USB o tarjeta SD
+- A USB drive or SD card
 - A dumped ISO from a Wii game disc
 - [Wii Backup Fusion](https://github.com/larsenv/Wii-Backup-Fusion)
 - [Wiimm's ISO Tools](https://wit.wiimm.de/download.html)

-### Instrucciones
+### Instructions

 #### Section I - Installation

--- a/docs/es_ES/wii-factory-reset.md
+++ b/docs/es_ES/wii-factory-reset.md
@ -26,7 +26,7 @@ If you are trying to [update your Wii to 4.3U](update) with homebrew or update o

 :::

-## Requisitos
+## Requirements

 - Una tarjeta SD con al menos 512 MB de espacio libre
 - A [NAND backup](bootmii) from the specific system you are trying to flash
@ -34,7 +34,7 @@ If you are trying to [update your Wii to 4.3U](update) with homebrew or update o
 - [Ohneschwanzenegger](https://raw.githubusercontent.com/modmii/modmii.github.io/master/temp/ohneschwanzenegger.zip)
 - [Nand BIN Checker](/assets/files/nandBinCheck.zip)

-## Instrucciones
+## Instructions

 ### Section I - Preparation

--- a/docs/es_ES/wii-loaders.md
+++ b/docs/es_ES/wii-loaders.md
@ -54,7 +54,7 @@ Below is a single WBFS example, and a split WBFS example. A WBFS needs to be spl

 ## http://www.wiithemer.org/

-### Requisitos
+### Requirements

 - Una consola Wii
 - The latest version of [cIOS](cios)
@ -105,11 +105,11 @@ When you bring the cursor to the bottom of the screen while in flow view, there

 ## USB Loader GX

-### Requisitos
+### Requirements

 - Una consola Wii
 - The latest version of [cIOS](cios)
- [USB Loader GX](https://oscwii.org/library/app/usbloader_gx)
+- [USB Loader GX](https://github.com/wiidev/usbloadergx/releases)

 ### Installation

--- a/Show More
+++ b/Show More