From 24b8b44780a2c53ecb738f4a1c08d114f5eda27c Mon Sep 17 00:00:00 2001 From: Tom Tucker Date: Wed, 13 Aug 2008 11:05:41 -0500 Subject: [PATCH 001/638] svcrdma: Fix race between svc_rdma_recvfrom thread and the dto_tasklet RDMA_READ completions are kept on a separate queue from the general I/O request queue. Since a separate lock is used to protect the RDMA_READ completion queue, a race exists between the dto_tasklet and the svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA bit and adds I/O to the read-completion queue. Concurrently, the recvfrom thread checks the generic queue, finds it empty and resets the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue the transport for I/O and cause the transport to "stall". The fix is to protect both lists with the same lock and set the XPT_DATA bit with this lock held. Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_rdma.h | 1 - net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 8 ++++---- net/sunrpc/xprtrdma/svc_rdma_transport.c | 5 ++--- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h index ef2e3a20bf3..dc05b54bd3a 100644 --- a/include/linux/sunrpc/svc_rdma.h +++ b/include/linux/sunrpc/svc_rdma.h @@ -143,7 +143,6 @@ struct svcxprt_rdma { unsigned long sc_flags; struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */ struct list_head sc_read_complete_q; - spinlock_t sc_read_complete_lock; struct work_struct sc_work; }; /* sc_flags */ diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c index b4b17f44cb2..74de31a0661 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c @@ -443,18 +443,18 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp) dprintk("svcrdma: rqstp=%p\n", rqstp); - spin_lock_bh(&rdma_xprt->sc_read_complete_lock); + spin_lock_bh(&rdma_xprt->sc_rq_dto_lock); if (!list_empty(&rdma_xprt->sc_read_complete_q)) { ctxt = list_entry(rdma_xprt->sc_read_complete_q.next, struct svc_rdma_op_ctxt, dto_q); list_del_init(&ctxt->dto_q); } - spin_unlock_bh(&rdma_xprt->sc_read_complete_lock); - if (ctxt) + if (ctxt) { + spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock); return rdma_read_complete(rqstp, ctxt); + } - spin_lock_bh(&rdma_xprt->sc_rq_dto_lock); if (!list_empty(&rdma_xprt->sc_rq_dto_q)) { ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next, struct svc_rdma_op_ctxt, diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 19ddc382b77..900cb69728c 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -359,11 +359,11 @@ static void sq_cq_reap(struct svcxprt_rdma *xprt) if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) { struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr; BUG_ON(!read_hdr); + spin_lock_bh(&xprt->sc_rq_dto_lock); set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags); - spin_lock_bh(&xprt->sc_read_complete_lock); list_add_tail(&read_hdr->dto_q, &xprt->sc_read_complete_q); - spin_unlock_bh(&xprt->sc_read_complete_lock); + spin_unlock_bh(&xprt->sc_rq_dto_lock); svc_xprt_enqueue(&xprt->sc_xprt); } svc_rdma_put_context(ctxt, 0); @@ -428,7 +428,6 @@ static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv, init_waitqueue_head(&cma_xprt->sc_send_wait); spin_lock_init(&cma_xprt->sc_lock); - spin_lock_init(&cma_xprt->sc_read_complete_lock); spin_lock_init(&cma_xprt->sc_rq_dto_lock); cma_xprt->sc_ord = svcrdma_ord; From cf417141cbb3a4ceb5cca15b2c1f099bd0a6603c Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Mon, 11 Aug 2008 14:33:53 -0700 Subject: [PATCH 002/638] sched, cpuset: rework sched domains and CPU hotplug handling (v4) This is an updated version of my previous cpuset patch on top of the latest mainline git. The patch fixes CPU hotplug handling issues in the current cpusets code. Namely circular locking in rebuild_sched_domains() and unsafe access to the cpu_online_map in the cpuset cpu hotplug handler. This version includes changes suggested by Paul Jackson (naming, comments, style, etc). I also got rid of the separate workqueue thread because it is now safe to call get_online_cpus() from workqueue callbacks. Here are some more details: rebuild_sched_domains() is the only way to rebuild sched domains correctly based on the current cpuset settings. What this means is that we need to be able to call it from different contexts, like cpu hotplug for example. Also latest scheduler code in -tip now calls rebuild_sched_domains() directly from functions like arch_reinit_sched_domains(). In order to support that properly we need to rework cpuset locking rules to avoid circular dependencies, which is what this patch does. New lock nesting rules are explained in the comments. We can now safely call rebuild_sched_domains() from virtually any context. The only requirement is that it needs to be called under get_online_cpus(). This allows cpu hotplug handlers and the scheduler to call rebuild_sched_domains() directly. The rest of the cpuset code now offloads sched domains rebuilds to a workqueue (async_rebuild_sched_domains()). This version of the patch addresses comments from the previous review. I fixed all miss-formated comments and trailing spaces. I also factored out the code that builds domain masks and split up CPU and memory hotplug handling. This was needed to simplify locking, to avoid unsafe access to the cpu_online_map from mem hotplug handler, and in general to make things cleaner. The patch passes moderate testing (building kernel with -j 16, creating & removing domains and bringing cpus off/online at the same time) on the quad-core2 based machine. It passes lockdep checks, even with preemptable RCU enabled. This time I also tested in with suspend/resume path and everything is working as expected. Signed-off-by: Max Krasnyansky Acked-by: Paul Jackson Cc: menage@google.com Cc: a.p.zijlstra@chello.nl Cc: vegard.nossum@gmail.com Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 318 ++++++++++++++++++++++++++++-------------------- 1 file changed, 185 insertions(+), 133 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index d5ab79cf516..f227bc17269 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -14,6 +14,8 @@ * 2003-10-22 Updates by Stephen Hemminger. * 2004 May-July Rework by Paul Jackson. * 2006 Rework by Paul Menage to use generic cgroups + * 2008 Rework of the scheduler domains and CPU hotplug handling + * by Max Krasnyansky * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of the Linux @@ -236,9 +238,11 @@ static struct cpuset top_cpuset = { static DEFINE_MUTEX(callback_mutex); -/* This is ugly, but preserves the userspace API for existing cpuset +/* + * This is ugly, but preserves the userspace API for existing cpuset * users. If someone tries to mount the "cpuset" filesystem, we - * silently switch it to mount "cgroup" instead */ + * silently switch it to mount "cgroup" instead + */ static int cpuset_get_sb(struct file_system_type *fs_type, int flags, const char *unused_dev_name, void *data, struct vfsmount *mnt) @@ -473,10 +477,9 @@ static int validate_change(const struct cpuset *cur, const struct cpuset *trial) } /* - * Helper routine for rebuild_sched_domains(). + * Helper routine for generate_sched_domains(). * Do cpusets a, b have overlapping cpus_allowed masks? */ - static int cpusets_overlap(struct cpuset *a, struct cpuset *b) { return cpus_intersects(a->cpus_allowed, b->cpus_allowed); @@ -518,26 +521,15 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) } /* - * rebuild_sched_domains() + * generate_sched_domains() * - * This routine will be called to rebuild the scheduler's dynamic - * sched domains: - * - if the flag 'sched_load_balance' of any cpuset with non-empty - * 'cpus' changes, - * - or if the 'cpus' allowed changes in any cpuset which has that - * flag enabled, - * - or if the 'sched_relax_domain_level' of any cpuset which has - * that flag enabled and with non-empty 'cpus' changes, - * - or if any cpuset with non-empty 'cpus' is removed, - * - or if a cpu gets offlined. - * - * This routine builds a partial partition of the systems CPUs - * (the set of non-overlappping cpumask_t's in the array 'part' - * below), and passes that partial partition to the kernel/sched.c - * partition_sched_domains() routine, which will rebuild the - * schedulers load balancing domains (sched domains) as specified - * by that partial partition. A 'partial partition' is a set of - * non-overlapping subsets whose union is a subset of that set. + * This function builds a partial partition of the systems CPUs + * A 'partial partition' is a set of non-overlapping subsets whose + * union is a subset of that set. + * The output of this function needs to be passed to kernel/sched.c + * partition_sched_domains() routine, which will rebuild the scheduler's + * load balancing domains (sched domains) as specified by that partial + * partition. * * See "What is sched_load_balance" in Documentation/cpusets.txt * for a background explanation of this. @@ -547,13 +539,7 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) * domains when operating in the severe memory shortage situations * that could cause allocation failures below. * - * Call with cgroup_mutex held. May take callback_mutex during - * call due to the kfifo_alloc() and kmalloc() calls. May nest - * a call to the get_online_cpus()/put_online_cpus() pair. - * Must not be called holding callback_mutex, because we must not - * call get_online_cpus() while holding callback_mutex. Elsewhere - * the kernel nests callback_mutex inside get_online_cpus() calls. - * So the reverse nesting would risk an ABBA deadlock. + * Must be called with cgroup_lock held. * * The three key local variables below are: * q - a linked-list queue of cpuset pointers, used to implement a @@ -588,10 +574,10 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) * element of the partition (one sched domain) to be passed to * partition_sched_domains(). */ - -void rebuild_sched_domains(void) +static int generate_sched_domains(cpumask_t **domains, + struct sched_domain_attr **attributes) { - LIST_HEAD(q); /* queue of cpusets to be scanned*/ + LIST_HEAD(q); /* queue of cpusets to be scanned */ struct cpuset *cp; /* scans q */ struct cpuset **csa; /* array of all cpuset ptrs */ int csn; /* how many cpuset ptrs in csa so far */ @@ -601,23 +587,26 @@ void rebuild_sched_domains(void) int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - csa = NULL; + ndoms = 0; doms = NULL; dattr = NULL; + csa = NULL; /* Special case for the 99% of systems with one, full, sched domain */ if (is_sched_load_balance(&top_cpuset)) { - ndoms = 1; doms = kmalloc(sizeof(cpumask_t), GFP_KERNEL); if (!doms) - goto rebuild; + goto done; + dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL); if (dattr) { *dattr = SD_ATTR_INIT; update_domain_attr_tree(dattr, &top_cpuset); } *doms = top_cpuset.cpus_allowed; - goto rebuild; + + ndoms = 1; + goto done; } csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL); @@ -680,61 +669,141 @@ restart: } } - /* Convert to */ + /* + * Now we know how many domains to create. + * Convert to and populate cpu masks. + */ doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL); - if (!doms) - goto rebuild; + if (!doms) { + ndoms = 0; + goto done; + } + + /* + * The rest of the code, including the scheduler, can deal with + * dattr==NULL case. No need to abort if alloc fails. + */ dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL); for (nslot = 0, i = 0; i < csn; i++) { struct cpuset *a = csa[i]; + cpumask_t *dp; int apn = a->pn; - if (apn >= 0) { - cpumask_t *dp = doms + nslot; - - if (nslot == ndoms) { - static int warnings = 10; - if (warnings) { - printk(KERN_WARNING - "rebuild_sched_domains confused:" - " nslot %d, ndoms %d, csn %d, i %d," - " apn %d\n", - nslot, ndoms, csn, i, apn); - warnings--; - } - continue; - } - - cpus_clear(*dp); - if (dattr) - *(dattr + nslot) = SD_ATTR_INIT; - for (j = i; j < csn; j++) { - struct cpuset *b = csa[j]; - - if (apn == b->pn) { - cpus_or(*dp, *dp, b->cpus_allowed); - b->pn = -1; - if (dattr) - update_domain_attr_tree(dattr - + nslot, b); - } - } - nslot++; + if (apn < 0) { + /* Skip completed partitions */ + continue; } + + dp = doms + nslot; + + if (nslot == ndoms) { + static int warnings = 10; + if (warnings) { + printk(KERN_WARNING + "rebuild_sched_domains confused:" + " nslot %d, ndoms %d, csn %d, i %d," + " apn %d\n", + nslot, ndoms, csn, i, apn); + warnings--; + } + continue; + } + + cpus_clear(*dp); + if (dattr) + *(dattr + nslot) = SD_ATTR_INIT; + for (j = i; j < csn; j++) { + struct cpuset *b = csa[j]; + + if (apn == b->pn) { + cpus_or(*dp, *dp, b->cpus_allowed); + if (dattr) + update_domain_attr_tree(dattr + nslot, b); + + /* Done with this partition */ + b->pn = -1; + } + } + nslot++; } BUG_ON(nslot != ndoms); -rebuild: - /* Have scheduler rebuild sched domains */ - get_online_cpus(); - partition_sched_domains(ndoms, doms, dattr); - put_online_cpus(); - done: kfree(csa); - /* Don't kfree(doms) -- partition_sched_domains() does that. */ - /* Don't kfree(dattr) -- partition_sched_domains() does that. */ + + *domains = doms; + *attributes = dattr; + return ndoms; +} + +/* + * Rebuild scheduler domains. + * + * Call with neither cgroup_mutex held nor within get_online_cpus(). + * Takes both cgroup_mutex and get_online_cpus(). + * + * Cannot be directly called from cpuset code handling changes + * to the cpuset pseudo-filesystem, because it cannot be called + * from code that already holds cgroup_mutex. + */ +static void do_rebuild_sched_domains(struct work_struct *unused) +{ + struct sched_domain_attr *attr; + cpumask_t *doms; + int ndoms; + + get_online_cpus(); + + /* Generate domain masks and attrs */ + cgroup_lock(); + ndoms = generate_sched_domains(&doms, &attr); + cgroup_unlock(); + + /* Have scheduler rebuild the domains */ + partition_sched_domains(ndoms, doms, attr); + + put_online_cpus(); +} + +static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains); + +/* + * Rebuild scheduler domains, asynchronously via workqueue. + * + * If the flag 'sched_load_balance' of any cpuset with non-empty + * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset + * which has that flag enabled, or if any cpuset with a non-empty + * 'cpus' is removed, then call this routine to rebuild the + * scheduler's dynamic sched domains. + * + * The rebuild_sched_domains() and partition_sched_domains() + * routines must nest cgroup_lock() inside get_online_cpus(), + * but such cpuset changes as these must nest that locking the + * other way, holding cgroup_lock() for much of the code. + * + * So in order to avoid an ABBA deadlock, the cpuset code handling + * these user changes delegates the actual sched domain rebuilding + * to a separate workqueue thread, which ends up processing the + * above do_rebuild_sched_domains() function. + */ +static void async_rebuild_sched_domains(void) +{ + schedule_work(&rebuild_sched_domains_work); +} + +/* + * Accomplishes the same scheduler domain rebuild as the above + * async_rebuild_sched_domains(), however it directly calls the + * rebuild routine synchronously rather than calling it via an + * asynchronous work thread. + * + * This can only be called from code that is not holding + * cgroup_mutex (not nested in a cgroup_lock() call.) + */ +void rebuild_sched_domains(void) +{ + do_rebuild_sched_domains(NULL); } /** @@ -863,7 +932,7 @@ static int update_cpumask(struct cpuset *cs, const char *buf) return retval; if (is_load_balanced) - rebuild_sched_domains(); + async_rebuild_sched_domains(); return 0; } @@ -1090,7 +1159,7 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val) if (val != cs->relax_domain_level) { cs->relax_domain_level = val; if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs)) - rebuild_sched_domains(); + async_rebuild_sched_domains(); } return 0; @@ -1131,7 +1200,7 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, mutex_unlock(&callback_mutex); if (cpus_nonempty && balance_flag_changed) - rebuild_sched_domains(); + async_rebuild_sched_domains(); return 0; } @@ -1492,6 +1561,9 @@ static u64 cpuset_read_u64(struct cgroup *cont, struct cftype *cft) default: BUG(); } + + /* Unreachable but makes gcc happy */ + return 0; } static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft) @@ -1504,6 +1576,9 @@ static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft) default: BUG(); } + + /* Unrechable but makes gcc happy */ + return 0; } @@ -1692,15 +1767,9 @@ static struct cgroup_subsys_state *cpuset_create( } /* - * Locking note on the strange update_flag() call below: - * * If the cpuset being removed has its flag 'sched_load_balance' * enabled, then simulate turning sched_load_balance off, which - * will call rebuild_sched_domains(). The get_online_cpus() - * call in rebuild_sched_domains() must not be made while holding - * callback_mutex. Elsewhere the kernel nests callback_mutex inside - * get_online_cpus() calls. So the reverse nesting would risk an - * ABBA deadlock. + * will call async_rebuild_sched_domains(). */ static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont) @@ -1719,7 +1788,7 @@ static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont) struct cgroup_subsys cpuset_subsys = { .name = "cpuset", .create = cpuset_create, - .destroy = cpuset_destroy, + .destroy = cpuset_destroy, .can_attach = cpuset_can_attach, .attach = cpuset_attach, .populate = cpuset_populate, @@ -1811,7 +1880,7 @@ static void move_member_tasks_to_cpuset(struct cpuset *from, struct cpuset *to) } /* - * If common_cpu_mem_hotplug_unplug(), below, unplugs any CPUs + * If CPU and/or memory hotplug handlers, below, unplug any CPUs * or memory nodes, we need to walk over the cpuset hierarchy, * removing that CPU or node from all cpusets. If this removes the * last CPU or node from a cpuset, then move the tasks in the empty @@ -1902,35 +1971,6 @@ static void scan_for_empty_cpusets(const struct cpuset *root) } } -/* - * The cpus_allowed and mems_allowed nodemasks in the top_cpuset track - * cpu_online_map and node_states[N_HIGH_MEMORY]. Force the top cpuset to - * track what's online after any CPU or memory node hotplug or unplug event. - * - * Since there are two callers of this routine, one for CPU hotplug - * events and one for memory node hotplug events, we could have coded - * two separate routines here. We code it as a single common routine - * in order to minimize text size. - */ - -static void common_cpu_mem_hotplug_unplug(int rebuild_sd) -{ - cgroup_lock(); - - top_cpuset.cpus_allowed = cpu_online_map; - top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; - scan_for_empty_cpusets(&top_cpuset); - - /* - * Scheduler destroys domains on hotplug events. - * Rebuild them based on the current settings. - */ - if (rebuild_sd) - rebuild_sched_domains(); - - cgroup_unlock(); -} - /* * The top_cpuset tracks what CPUs and Memory Nodes are online, * period. This is necessary in order to make cpusets transparent @@ -1939,40 +1979,52 @@ static void common_cpu_mem_hotplug_unplug(int rebuild_sd) * * This routine ensures that top_cpuset.cpus_allowed tracks * cpu_online_map on each CPU hotplug (cpuhp) event. + * + * Called within get_online_cpus(). Needs to call cgroup_lock() + * before calling generate_sched_domains(). */ - -static int cpuset_handle_cpuhp(struct notifier_block *unused_nb, +static int cpuset_track_online_cpus(struct notifier_block *unused_nb, unsigned long phase, void *unused_cpu) { + struct sched_domain_attr *attr; + cpumask_t *doms; + int ndoms; + switch (phase) { - case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: - case CPU_DOWN_FAILED: - case CPU_DOWN_FAILED_FROZEN: case CPU_ONLINE: case CPU_ONLINE_FROZEN: case CPU_DEAD: case CPU_DEAD_FROZEN: - common_cpu_mem_hotplug_unplug(1); break; + default: return NOTIFY_DONE; } + cgroup_lock(); + top_cpuset.cpus_allowed = cpu_online_map; + scan_for_empty_cpusets(&top_cpuset); + ndoms = generate_sched_domains(&doms, &attr); + cgroup_unlock(); + + /* Have scheduler rebuild the domains */ + partition_sched_domains(ndoms, doms, attr); + return NOTIFY_OK; } #ifdef CONFIG_MEMORY_HOTPLUG /* * Keep top_cpuset.mems_allowed tracking node_states[N_HIGH_MEMORY]. - * Call this routine anytime after you change - * node_states[N_HIGH_MEMORY]. - * See also the previous routine cpuset_handle_cpuhp(). + * Call this routine anytime after node_states[N_HIGH_MEMORY] changes. + * See also the previous routine cpuset_track_online_cpus(). */ - void cpuset_track_online_nodes(void) { - common_cpu_mem_hotplug_unplug(0); + cgroup_lock(); + top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; + scan_for_empty_cpusets(&top_cpuset); + cgroup_unlock(); } #endif @@ -1987,7 +2039,7 @@ void __init cpuset_init_smp(void) top_cpuset.cpus_allowed = cpu_online_map; top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; - hotcpu_notifier(cpuset_handle_cpuhp, 0); + hotcpu_notifier(cpuset_track_online_cpus, 0); } /** From 924e61a90f61b1c22fcb51aaf3afc065399cec81 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Sat, 16 Aug 2008 02:11:28 +0200 Subject: [PATCH 003/638] ACPI: Fix now signed module parameter. Signed-off-by: Milan Broz Signed-off-by: Andi Kleen --- drivers/acpi/processor_perflib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 80e32093e97..80c251ec6d2 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(performance_mutex); * 1 -> ignore _PPC totally -> forced by user through boot param */ static int ignore_ppc = -1; -module_param(ignore_ppc, uint, 0644); +module_param(ignore_ppc, int, 0644); MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ "limited by BIOS, this should help"); From 1371c893ff9de0d57fa5b5cf0255d66b8849e13d Mon Sep 17 00:00:00 2001 From: Ming Ling Date: Mon, 18 Aug 2008 04:14:59 +0200 Subject: [PATCH 004/638] ACPI: Change package length error to warning The condition is harmless and no need to scare the user http://bugzilla.kernel.org/show_bug.cgi?id=11245 Signed-off-by: Andi Kleen --- drivers/acpi/dispatcher/dsobject.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c index 1022e38994c..0f280589921 100644 --- a/drivers/acpi/dispatcher/dsobject.c +++ b/drivers/acpi/dispatcher/dsobject.c @@ -496,7 +496,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state, arg = arg->common.next; } - ACPI_ERROR((AE_INFO, + ACPI_WARNING((AE_INFO, "Package List length (%X) larger than NumElements count (%X), truncated\n", i, element_count)); } else if (i < element_count) { From 613e5f3376e48bd48494cf780b79b97b057d49a7 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Sat, 16 Aug 2008 02:11:28 +0200 Subject: [PATCH 005/638] ACPI: Fix now signed module parameter. Signed-off-by: Milan Broz Signed-off-by: Andi Kleen --- drivers/acpi/processor_perflib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 80e32093e97..80c251ec6d2 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(performance_mutex); * 1 -> ignore _PPC totally -> forced by user through boot param */ static int ignore_ppc = -1; -module_param(ignore_ppc, uint, 0644); +module_param(ignore_ppc, int, 0644); MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ "limited by BIOS, this should help"); From db0badc58e948b810c7a75cfcc48845e2949ee37 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 18 Aug 2008 13:40:18 +0200 Subject: [PATCH 006/638] udf: Fix lock inversion between iprune_mutex and alloc_mutex (v2) A memory allocation inside alloc_mutex must not recurse back into the filesystem itself because that leads to lock inversion between iprune_mutex and alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually needed only to update allocation statistics in the superblock so we can drop it before we start allocating memory for the inode. tar D ffff81015b9c8c90 0 6614 6612 ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000 ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000 0000000000000003 0000000000000000 0000000000000000 0000000000000000 Call Trace: [] __mutex_lock_slowpath+0x64/0x9b [] mutex_lock+0xa/0xb [] shrink_icache_memory+0x38/0x200 [] shrink_slab+0xe3/0x15b [] try_to_free_pages+0x221/0x30d [] isolate_pages_global+0x0/0x31 [] __alloc_pages_internal+0x252/0x3ab [] cache_alloc_refill+0x22e/0x47b [] kmem_cache_alloc+0x3b/0x61 [] cache_alloc_refill+0x2fe/0x47b [] __kmalloc+0x76/0x9c [] :udf:udf_new_inode+0x202/0x2e2 [] :udf:udf_create+0x2f/0x16d [] :udf:udf_lookup+0xa6/0xad ... kswapd0 D ffff81015b9d9270 0 125 2 ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490 ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90 Call Trace: [] __set_page_dirty+0xeb/0xf5 [] get_dirty_limits+0x1d/0x22f [] __mutex_lock_slowpath+0x64/0x9b [] mutex_lock+0xa/0xb [] :udf:udf_bitmap_free_blocks+0x47/0x1eb [] :udf:udf_discard_prealloc+0xc6/0x172 [] :udf:udf_clear_inode+0x1e/0x48 [] clear_inode+0x6d/0xc4 [] dispose_list+0x56/0xee [] shrink_icache_memory+0x1d0/0x200 [] shrink_slab+0xe3/0x15b [] kswapd+0x346/0x447 ... Reported-by: Tibor Tajti Reviewed-by: Ingo Oeser Signed-off-by: Jan Kara --- fs/udf/ialloc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c index eb9cfa23dc3..c4943c8988c 100644 --- a/fs/udf/ialloc.c +++ b/fs/udf/ialloc.c @@ -111,6 +111,7 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err) lvhd->uniqueID = cpu_to_le64(uniqueID); mark_buffer_dirty(sbi->s_lvid_bh); } + mutex_unlock(&sbi->s_alloc_mutex); inode->i_mode = mode; inode->i_uid = current->fsuid; if (dir->i_mode & S_ISGID) { @@ -145,7 +146,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err) if (!iinfo->i_ext.i_data) { iput(inode); *err = -ENOMEM; - mutex_unlock(&sbi->s_alloc_mutex); return NULL; } if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB)) @@ -158,7 +158,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err) iinfo->i_crtime = current_fs_time(inode->i_sb); insert_inode_hash(inode); mark_inode_dirty(inode); - mutex_unlock(&sbi->s_alloc_mutex); if (DQUOT_ALLOC_INODE(inode)) { DQUOT_DROP(inode); From 97e1cfb08616987878f91a46cefdd7fc5fa3dba1 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 18 Aug 2008 13:44:48 +0200 Subject: [PATCH 007/638] udf: Fix error paths in udf_new_inode() I case we failed to allocate memory for inode when creating it, we did not properly free block already allocated for this inode. Move memory allocation before the block allocation which fixes this issue (thanks for the idea go to Ingo Oeser ). Also remove a few superfluous initializations already done in udf_alloc_inode(). Reviewed-by: Ingo Oeser Signed-off-by: Jan Kara --- fs/udf/ialloc.c | 41 ++++++++++++++++++----------------------- 1 file changed, 18 insertions(+), 23 deletions(-) diff --git a/fs/udf/ialloc.c b/fs/udf/ialloc.c index c4943c8988c..a4f2b3ce45b 100644 --- a/fs/udf/ialloc.c +++ b/fs/udf/ialloc.c @@ -76,11 +76,24 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err) *err = -ENOSPC; iinfo = UDF_I(inode); - iinfo->i_unique = 0; - iinfo->i_lenExtents = 0; - iinfo->i_next_alloc_block = 0; - iinfo->i_next_alloc_goal = 0; - iinfo->i_strat4096 = 0; + if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) { + iinfo->i_efe = 1; + if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev) + sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE; + iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize - + sizeof(struct extendedFileEntry), + GFP_KERNEL); + } else { + iinfo->i_efe = 0; + iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize - + sizeof(struct fileEntry), + GFP_KERNEL); + } + if (!iinfo->i_ext.i_data) { + iput(inode); + *err = -ENOMEM; + return NULL; + } block = udf_new_block(dir->i_sb, NULL, dinfo->i_location.partitionReferenceNum, @@ -130,24 +143,6 @@ struct inode *udf_new_inode(struct inode *dir, int mode, int *err) iinfo->i_lenEAttr = 0; iinfo->i_lenAlloc = 0; iinfo->i_use = 0; - if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) { - iinfo->i_efe = 1; - if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev) - sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE; - iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize - - sizeof(struct extendedFileEntry), - GFP_KERNEL); - } else { - iinfo->i_efe = 0; - iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize - - sizeof(struct fileEntry), - GFP_KERNEL); - } - if (!iinfo->i_ext.i_data) { - iput(inode); - *err = -ENOMEM; - return NULL; - } if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB)) iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB; else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD)) From aab3a8c7a3a6a001dd439ed00d4db17a1059803e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 19 Aug 2008 14:23:37 +0000 Subject: [PATCH 008/638] [CIFS] reindent misindented statement MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 848286861c3..9c548f11010 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -546,7 +546,8 @@ int cifs_get_inode_info(struct inode **pinode, if ((inode->i_mode & S_IWUGO) == 0 && (attr & ATTR_READONLY) == 0) inode->i_mode |= (S_IWUGO & default_mode); - inode->i_mode &= ~S_IFMT; + + inode->i_mode &= ~S_IFMT; } /* clear write bits if ATTR_READONLY is set */ if (attr & ATTR_READONLY) From cb7691b648bddbfaf6dd8d8068273dbb18d2484c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 18 Aug 2008 15:41:05 -0400 Subject: [PATCH 009/638] cifs: add local server pointer to cifs_setup_session cifs_setup_session references pSesInfo->server several times. That pointer shouldn't change during the life of the function so grab it once and store it in a local var. This makes the code look a little cleaner too. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0711db65afe..4c13bcdb92a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3598,19 +3598,21 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, char ntlm_session_key[CIFS_SESS_KEY_SIZE]; bool ntlmv2_flag = false; int first_time = 0; + struct TCP_Server_Info *server = pSesInfo->server; /* what if server changes its buffer size after dropping the session? */ - if (pSesInfo->server->maxBuf == 0) /* no need to send on reconnect */ { + if (server->maxBuf == 0) /* no need to send on reconnect */ { rc = CIFSSMBNegotiate(xid, pSesInfo); - if (rc == -EAGAIN) /* retry only once on 1st time connection */ { + if (rc == -EAGAIN) { + /* retry only once on 1st time connection */ rc = CIFSSMBNegotiate(xid, pSesInfo); if (rc == -EAGAIN) rc = -EHOSTDOWN; } if (rc == 0) { spin_lock(&GlobalMid_Lock); - if (pSesInfo->server->tcpStatus != CifsExiting) - pSesInfo->server->tcpStatus = CifsGood; + if (server->tcpStatus != CifsExiting) + server->tcpStatus = CifsGood; else rc = -EHOSTDOWN; spin_unlock(&GlobalMid_Lock); @@ -3623,23 +3625,22 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, goto ss_err_exit; pSesInfo->flags = 0; - pSesInfo->capabilities = pSesInfo->server->capabilities; + pSesInfo->capabilities = server->capabilities; if (linuxExtEnabled == 0) pSesInfo->capabilities &= (~CAP_UNIX); /* pSesInfo->sequence_number = 0;*/ cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", - pSesInfo->server->secMode, - pSesInfo->server->capabilities, - pSesInfo->server->timeAdj)); + server->secMode, server->capabilities, server->timeAdj)); + if (experimEnabled < 2) rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info); else if (extended_security && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == NTLMSSP)) { + && (server->secType == NTLMSSP)) { rc = -EOPNOTSUPP; } else if (extended_security && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == RawNTLMSSP)) { + && (server->secType == RawNTLMSSP)) { cFYI(1, ("NTLMSSP sesssetup")); rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag, nls_info); @@ -3668,12 +3669,12 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, } else { SMBNTencrypt(pSesInfo->password, - pSesInfo->server->cryptKey, + server->cryptKey, ntlm_session_key); if (first_time) cifs_calculate_mac_key( - &pSesInfo->server->mac_signing_key, + &server->mac_signing_key, ntlm_session_key, pSesInfo->password); } @@ -3686,13 +3687,13 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, nls_info); } } else { /* old style NTLM 0.12 session setup */ - SMBNTencrypt(pSesInfo->password, pSesInfo->server->cryptKey, + SMBNTencrypt(pSesInfo->password, server->cryptKey, ntlm_session_key); if (first_time) - cifs_calculate_mac_key( - &pSesInfo->server->mac_signing_key, - ntlm_session_key, pSesInfo->password); + cifs_calculate_mac_key(&server->mac_signing_key, + ntlm_session_key, + pSesInfo->password); rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info); } From c16fefa56334e8d0197492607e473fdbb813073f Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 19 Aug 2008 19:35:33 +0000 Subject: [PATCH 010/638] [CIFS] distinguish between Kerberos and MSKerberos in upcall Properly handle MSKRB5 by passing sec=mskrb5 to the upcall so that the spengo blob can be generated appropriately. Also, make decode_negTokenInit prefer whichever mechanism is first in the list. Needed for some NetApp servers, and possibly some older versions of Windows which treat the two KRB5 mechanisms differently. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/asn1.c | 11 ++++++++--- fs/cifs/cifs_spnego.c | 4 +++- fs/cifs/cifsglob.h | 3 ++- fs/cifs/sess.c | 2 +- 4 files changed, 14 insertions(+), 6 deletions(-) diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index 5fabd2caf93..1b09f167006 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -476,6 +476,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, unsigned int cls, con, tag, oidlen, rc; bool use_ntlmssp = false; bool use_kerberos = false; + bool use_mskerberos = false; *secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/ @@ -574,10 +575,12 @@ decode_negTokenInit(unsigned char *security_blob, int length, *(oid + 1), *(oid + 2), *(oid + 3))); if (compare_oid(oid, oidlen, MSKRB5_OID, - MSKRB5_OID_LEN)) - use_kerberos = true; + MSKRB5_OID_LEN) && + !use_kerberos) + use_mskerberos = true; else if (compare_oid(oid, oidlen, KRB5_OID, - KRB5_OID_LEN)) + KRB5_OID_LEN) && + !use_mskerberos) use_kerberos = true; else if (compare_oid(oid, oidlen, NTLMSSP_OID, NTLMSSP_OID_LEN)) @@ -630,6 +633,8 @@ decode_negTokenInit(unsigned char *security_blob, int length, if (use_kerberos) *secType = Kerberos; + else if (use_mskerberos) + *secType = MSKerberos; else if (use_ntlmssp) *secType = NTLMSSP; diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 2434ab0e879..117ef4bba68 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -114,9 +114,11 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo) dp = description + strlen(description); - /* for now, only sec=krb5 is valid */ + /* for now, only sec=krb5 and sec=mskrb5 are valid */ if (server->secType == Kerberos) sprintf(dp, ";sec=krb5"); + else if (server->secType == MSKerberos) + sprintf(dp, ";sec=mskrb5"); else goto out; diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 7e1cf262eff..8dfd6f24d48 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -80,7 +80,8 @@ enum securityEnum { NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */ RawNTLMSSP, /* NTLMSSP without SPNEGO */ NTLMSSP, /* NTLMSSP via SPNEGO */ - Kerberos /* Kerberos via SPNEGO */ + Kerberos, /* Kerberos via SPNEGO */ + MSKerberos, /* MS Kerberos via SPNEGO */ }; enum protocolEnum { diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index ed150efbe27..3188e4d9cdd 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -505,7 +505,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, unicode_ssetup_strings(&bcc_ptr, ses, nls_cp); } else ascii_ssetup_strings(&bcc_ptr, ses, nls_cp); - } else if (type == Kerberos) { + } else if (type == Kerberos || type == MSKerberos) { #ifdef CONFIG_CIFS_UPCALL struct cifs_spnego_msg *msg; spnego_key = cifs_get_spnego_key(ses); From 3d2af3465e91335bd1dbf36b19e92079d901409f Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 19 Aug 2008 20:51:09 +0000 Subject: [PATCH 011/638] [CIFS] Kerberos support not considered experimental anymore Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/Kconfig | 1 - fs/cifs/README | 30 ++++++++++++++++++++++++++---- 2 files changed, 26 insertions(+), 5 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index d3873583360..f0427105a61 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1984,7 +1984,6 @@ config CIFS_EXPERIMENTAL config CIFS_UPCALL bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)" - depends on CIFS_EXPERIMENTAL depends on KEYS help Enables an upcall mechanism for CIFS which accesses diff --git a/fs/cifs/README b/fs/cifs/README index 2bd6fe556f8..68b5c1169d9 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -642,8 +642,30 @@ The statistics for the number of total SMBs and oplock breaks are different in that they represent all for that share, not just those for which the server returned success. -Also note that "cat /proc/fs/cifs/DebugData" will display information about +Also note that "cat /proc/fs/cifs/DebugData" will display information about the active sessions and the shares that are mounted. -Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is -on but requires a user space helper (from the Samba project). NTLM and NTLMv2 and -LANMAN support do not require this helper. + +Enabling Kerberos (extended security) works but requires version 1.2 or later +of the helper program cifs.upcall to be present and to be configured in the +/etc/request-key.conf file. The cifs.upcall helper program is from the Samba +project(http://www.samba.org). NTLM and NTLMv2 and LANMAN support do not +require this helper. Note that NTLMv2 security (which does not require the +cifs.upcall helper program), instead of using Kerberos, is sufficient for +some use cases. + +Enabling DFS support (used to access shares transparently in an MS-DFS +global name space) requires that CONFIG_CIFS_EXPERIMENTAL be enabled. In +addition, DFS support for target shares which are specified as UNC +names which begin with host names (rather than IP addresses) requires +a user space helper (such as cifs.upcall) to be present in order to +translate host names to ip address, and the user space helper must also +be configured in the file /etc/request-key.conf + +To use cifs Kerberos and DFS support, the Linux keyutils package should be +installed and something like the following lines should be added to the +/etc/request-key.conf file: + +create cifs.spnego * * /usr/local/sbin/cifs.upcall %k +create dns_resolver * * /usr/local/sbin/cifs.upcall %k + + From e2cb96b7ecba46888cf00252ffdb8ef1e92c4258 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 19 Aug 2008 08:51:22 -0500 Subject: [PATCH 012/638] slub: Disable NUMA remote node defragmentation by default Switch remote node defragmentation off by default. The current settings can cause excessive node local allocations with hackbench: SLAB: % cat /proc/meminfo MemTotal: 7701760 kB MemFree: 5940096 kB Slab: 123840 kB SLUB: % cat /proc/meminfo MemTotal: 7701376 kB MemFree: 4740928 kB Slab: 1591680 kB [Note: this feature is not related to slab defragmentation.] You can find the original discussion here: http://lkml.org/lkml/2008/8/4/308 Reported-by: KOSAKI Motohiro Tested-by: KOSAKI Motohiro Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 4f5b9614945..fb486d5540f 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2312,7 +2312,7 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags, s->refcount = 1; #ifdef CONFIG_NUMA - s->remote_node_defrag_ratio = 100; + s->remote_node_defrag_ratio = 1000; #endif if (!init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA)) goto error; @@ -4058,7 +4058,7 @@ static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s, if (err) return err; - if (ratio < 100) + if (ratio <= 100) s->remote_node_defrag_ratio = ratio * 10; return length; From ba1616d921429ffe7480e8835e85f95ff041add8 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 31 Jul 2008 17:06:31 -0500 Subject: [PATCH 013/638] powerpc: Fix whitespace merge in mpc8641 hpcn device tree When we coverted the .dts to v1 we lost a space between the irq and its polarity/sense information. This causes a bit of chaos as the reset of the blob is off by one cell. This was noticed by booting and getting errors w/ATA due to lock of interrupts. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8641_hpcn.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index ae08761ffff..d665e767822 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -411,7 +411,7 @@ 0xe000 0 0 1 &i8259 12 2 0xe100 0 0 2 &i8259 9 2 0xe200 0 0 3 &i8259 10 2 - 0xe300 0 0 4 &i8259 112 + 0xe300 0 0 4 &i8259 11 2 // IDSEL 0x1d Audio 0xe800 0 0 1 &i8259 6 2 From d27a736c7a62c3451e389aa8e0dfc64dab119b9b Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Sun, 17 Aug 2008 10:51:25 +0200 Subject: [PATCH 014/638] powerpc/85xx: TQM8548: DTS file fixes and cleanup Due to the missing compatible property for the SOC, the MPC I2C buses are not found any more. This patch fixes this issue. Furthermore it corrects the name of the SOC node and adds the missing I2C node for the RTC. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/tqm8548-bigflash.dts | 8 +++++++- arch/powerpc/boot/dts/tqm8548.dts | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 64d2d5bbcdf..4199e89b4e5 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -50,13 +50,14 @@ reg = <0x00000000 0x00000000>; // Filled in by U-Boot }; - soc8548@a0000000 { + soc@a0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; ranges = <0x0 0xa0000000 0x100000>; reg = <0xa0000000 0x1000>; // CCSRBAR bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; memory-controller@2000 { compatible = "fsl,mpc8548-memory-controller"; @@ -83,6 +84,11 @@ interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; }; i2c@3100 { diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index 2563112cabd..58ee4185454 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -50,13 +50,14 @@ reg = <0x00000000 0x00000000>; // Filled in by U-Boot }; - soc8548@e0000000 { + soc@e0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; memory-controller@2000 { compatible = "fsl,mpc8548-memory-controller"; From 61a4e9e91dd3916ef91aa4899b7271bba0248677 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Wed, 20 Aug 2008 10:29:09 -0500 Subject: [PATCH 015/638] powerpc: fix memory leaks in QE library Fix two memory leaks in the Freescale QE library: add a missing kfree() in ucc_fast_init() and ucc_slow_init() if the ioremap() fails, and update ucc_fast_free() and ucc_slow_free() to call iounmap() if necessary. Based on a patch from Tony Breeds . Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/qe_lib/ucc_fast.c | 4 ++++ arch/powerpc/sysdev/qe_lib/ucc_slow.c | 8 +++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 1aecb075a72..25fbbfaa837 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -208,6 +208,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccf); return -ENOMEM; } @@ -355,6 +356,9 @@ void ucc_fast_free(struct ucc_fast_private * uccf) if (uccf->ucc_fast_rx_virtual_fifo_base_offset) qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + if (uccf->uf_regs) + iounmap(uccf->uf_regs); + kfree(uccf); } EXPORT_SYMBOL(ucc_fast_free); diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index a578bc77b9d..e1d6a134015 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -171,6 +171,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); if (uccs->us_regs == NULL) { printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccs); return -ENOMEM; } @@ -367,10 +368,11 @@ void ucc_slow_free(struct ucc_slow_private * uccs) if (uccs->tx_base_offset) qe_muram_free(uccs->tx_base_offset); - if (uccs->us_pram) { + if (uccs->us_pram) qe_muram_free(uccs->us_pram_offset); - uccs->us_pram = NULL; - } + + if (uccs->us_regs) + iounmap(uccs->us_regs); kfree(uccs); } From 639d64456e20cbfc866b18dc03cf9f9babc9c7cd Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 19 Aug 2008 14:20:23 +0200 Subject: [PATCH 016/638] cpm2: Fix race condition in CPM2 GPIO library. The CPM2 GPIO library code uses the non thread-safe clrbits32/setbits32 macros. This patch protects them with a spinlock. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm_common.c | 57 ++++++++++++++++++++------------ 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index 53da8a079f9..00d3d17c84a 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -254,7 +254,35 @@ static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) return !!(in_be32(&iop->dat) & pin_mask); } +static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask, + int value) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); +} + static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + __cpm2_gpio32_set(mm_gc, pin_mask, value); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); @@ -264,27 +292,10 @@ static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) spin_lock_irqsave(&cpm2_gc->lock, flags); - if (value) - cpm2_gc->cpdata |= pin_mask; - else - cpm2_gc->cpdata &= ~pin_mask; - - out_be32(&iop->dat, cpm2_gc->cpdata); + setbits32(&iop->dir, pin_mask); + __cpm2_gpio32_set(mm_gc, pin_mask, val); spin_unlock_irqrestore(&cpm2_gc->lock, flags); -} - -static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct cpm2_ioports __iomem *iop = mm_gc->regs; - u32 pin_mask; - - pin_mask = 1 << (31 - gpio); - - setbits32(&iop->dir, pin_mask); - - cpm2_gpio32_set(gc, gpio, val); return 0; } @@ -292,13 +303,17 @@ static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); struct cpm2_ioports __iomem *iop = mm_gc->regs; - u32 pin_mask; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); - pin_mask = 1 << (31 - gpio); + spin_lock_irqsave(&cpm2_gc->lock, flags); clrbits32(&iop->dir, pin_mask); + spin_unlock_irqrestore(&cpm2_gc->lock, flags); + return 0; } From 8dd217b27e32081121c31d927e7c70f6dbf6f5c6 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 31 Jul 2008 19:10:22 +0300 Subject: [PATCH 017/638] powerpc: Add cuImage.mpc866ads to the bootwrapper as a cuboot-8xx target This patch fixes the following build error with mpc866_ads_defconfig: <-- snip --> ... WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Scott Wood Signed-off-by: Adrian Bunk Signed-off-by: Kumar Gala --- arch/powerpc/boot/wrapper | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 644bf9d4ea0..965c237c122 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -165,7 +165,7 @@ cuboot*) binary=y gzip= case "$platform" in - *-mpc885ads|*-adder875*|*-ep88xc) + *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc) platformo=$object/cuboot-8xx.o ;; *5200*|*-motionpro) From 79c4375bf2df96d725475e0c061a4d78c3bd0884 Mon Sep 17 00:00:00 2001 From: Dennis Jansen Date: Wed, 20 Aug 2008 16:44:03 +0200 Subject: [PATCH 018/638] ACPI: Fix typo in "Disable MWAIT via DMI on broken Compal board" This fixes a typo in commit 2a2a64714d9c40f7705c4de1e79a5b855c7211a9 "Disable MWAIT via DMI on broken Compal board". It allows the nomwait dmi check to actually detect the Acer 5220. Signed-off-by: Dennis Jansen Tested-by: Dennis Jansen Acked-by: Zhao Yakui Signed-off-by: Andi Kleen --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e36422a7122..499f2fad204 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { { set_no_mwait, "Extensa 5220", { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, {}, From f0df2d6b52ad7db5edf56909509d51be66fe90be Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 20 Aug 2008 16:41:45 -0700 Subject: [PATCH 019/638] acpi: add checking for NULL early param The early_param handling function could recieve NULL pointer as argument in case if user didn't enter parameter value. So we have to be ready for a such situation and do check for NULL pointer if needed. Signed-off-by: Cyrill Gorcunov Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- drivers/acpi/tables.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index c3419182c9a..775c97a282b 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -300,6 +300,8 @@ int __init acpi_table_init(void) static int __init acpi_parse_apic_instance(char *str) { + if (!str) + return -EINVAL; acpi_apic_instance = simple_strtoul(str, NULL, 0); From 2bb2e1db906e6e139636271d2cf46466d9e84005 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 21 Aug 2008 07:11:30 -0500 Subject: [PATCH 020/638] powerpc: Update defconfigs for FSL PPC boards Since we are updated defconfigs I went ahead and moved the asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under 85xx/ as that is where they should have been to start with. Signed-off-by: Kumar Gala --- .../configs/{ => 83xx}/asp8347_defconfig | 316 +++++++++----- .../configs/83xx/mpc8313_rdb_defconfig | 188 +++++++-- .../configs/83xx/mpc8315_rdb_defconfig | 188 +++++++-- .../configs/83xx/mpc832x_mds_defconfig | 172 ++++++-- .../configs/83xx/mpc832x_rdb_defconfig | 176 ++++++-- .../configs/83xx/mpc834x_itx_defconfig | 175 ++++++-- .../configs/83xx/mpc834x_itxgp_defconfig | 172 ++++++-- .../configs/83xx/mpc834x_mds_defconfig | 168 ++++++-- .../configs/83xx/mpc836x_mds_defconfig | 172 ++++++-- .../configs/83xx/mpc836x_rdk_defconfig | 183 +++++--- .../configs/83xx/mpc837x_mds_defconfig | 351 ++++++++++++++-- .../configs/83xx/mpc837x_rdb_defconfig | 340 +++++++++++++-- arch/powerpc/configs/83xx/sbc834x_defconfig | 239 +++++++++-- arch/powerpc/configs/85xx/ksi8560_defconfig | 95 +++-- .../configs/{ => 85xx}/mpc8536_ds_defconfig | 167 ++++---- .../configs/85xx/mpc8540_ads_defconfig | 71 +++- .../powerpc/configs/85xx/mpc8544_ds_defconfig | 178 ++++---- .../configs/85xx/mpc8560_ads_defconfig | 98 +++-- .../powerpc/configs/85xx/mpc8568mds_defconfig | 121 ++++-- .../powerpc/configs/85xx/mpc8572_ds_defconfig | 177 ++++---- .../configs/85xx/mpc85xx_cds_defconfig | 85 ++-- arch/powerpc/configs/85xx/sbc8548_defconfig | 63 ++- arch/powerpc/configs/85xx/sbc8560_defconfig | 69 +++- arch/powerpc/configs/85xx/stx_gp3_defconfig | 163 +++++--- arch/powerpc/configs/85xx/tqm8540_defconfig | 112 +++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 139 +++++-- arch/powerpc/configs/85xx/tqm8548_defconfig | 129 ++++-- arch/powerpc/configs/85xx/tqm8555_defconfig | 139 +++++-- arch/powerpc/configs/85xx/tqm8560_defconfig | 139 +++++-- arch/powerpc/configs/adder875_defconfig | 55 ++- arch/powerpc/configs/c2k_defconfig | 247 +++++------ arch/powerpc/configs/ep8248e_defconfig | 198 +++++++-- arch/powerpc/configs/ep88xc_defconfig | 57 ++- arch/powerpc/configs/linkstation_defconfig | 133 ++++-- arch/powerpc/configs/mpc7448_hpc2_defconfig | 72 +++- arch/powerpc/configs/mpc8272_ads_defconfig | 132 ++++-- arch/powerpc/configs/mpc83xx_defconfig | 389 ++++++++++++++++-- arch/powerpc/configs/mpc85xx_defconfig | 207 ++++++---- arch/powerpc/configs/mpc8610_hpcd_defconfig | 165 ++++---- arch/powerpc/configs/mpc8641_hpcn_defconfig | 215 ++++++---- arch/powerpc/configs/mpc866_ads_defconfig | 61 ++- arch/powerpc/configs/mpc885_ads_defconfig | 57 ++- arch/powerpc/configs/pq2fads_defconfig | 147 +++++-- arch/powerpc/configs/prpmc2800_defconfig | 127 ++++-- arch/powerpc/configs/sbc8641d_defconfig | 173 ++++++-- arch/powerpc/configs/storcenter_defconfig | 113 +++-- 46 files changed, 5371 insertions(+), 1962 deletions(-) rename arch/powerpc/configs/{ => 83xx}/asp8347_defconfig (87%) rename arch/powerpc/configs/{ => 85xx}/mpc8536_ds_defconfig (95%) diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig similarity index 87% rename from arch/powerpc/configs/asp8347_defconfig rename to arch/powerpc/configs/83xx/asp8347_defconfig index 60bb4d106c8..5e6780a088c 100644 --- a/arch/powerpc/configs/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Tue May 6 02:21:00 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:01 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -31,6 +32,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -50,6 +54,9 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -92,6 +99,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,24 +117,33 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,38 +162,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -192,7 +220,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -202,6 +230,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -212,13 +241,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -226,10 +259,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -239,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,15 +285,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# CONFIG_NET=y # @@ -300,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -363,6 +394,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -434,9 +466,11 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -453,12 +487,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -476,12 +512,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -508,6 +547,8 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -525,7 +566,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -535,14 +575,14 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -551,6 +591,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -606,6 +647,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -625,16 +667,17 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -643,67 +686,85 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -713,6 +774,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -757,6 +819,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -764,7 +827,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -786,13 +851,25 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -810,10 +887,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y @@ -831,16 +904,21 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -851,6 +929,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -865,7 +944,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers @@ -878,7 +956,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -894,18 +971,16 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y - -# -# Conflicting RTC option has been selected, check GEN_RTC and RTC -# CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set @@ -933,6 +1008,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -953,11 +1029,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -977,7 +1050,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1036,6 +1108,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1046,15 +1119,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1126,8 +1197,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1146,6 +1219,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1154,7 +1228,18 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1164,51 +1249,86 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 5428f9f5ed8..2028337868b 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:21 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:17 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y CONFIG_MPC831x_RDB=y # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC831x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -452,9 +478,11 @@ CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -553,7 +583,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -570,12 +603,15 @@ CONFIG_MD_RAID1=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -602,6 +638,8 @@ CONFIG_CICADA_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -638,7 +676,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -652,9 +689,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -752,11 +790,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -768,43 +809,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -828,11 +896,15 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -841,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -886,6 +959,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -893,7 +967,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -915,8 +991,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -949,10 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -986,6 +1060,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1009,6 +1084,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers @@ -1037,6 +1113,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1045,7 +1122,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1058,7 +1134,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1085,7 +1160,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_FSL_USB2 is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -1103,6 +1178,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1138,10 +1214,13 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1240,6 +1319,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1250,14 +1330,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1297,6 +1376,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1323,6 +1403,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1340,19 +1422,32 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1406,6 +1501,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1438,5 +1537,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 9bc3a03ae26..dd80eb0a87a 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:21 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:18 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y CONFIG_MPC831x_RDB=y # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC831x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -452,9 +478,11 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -554,7 +584,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -631,12 +664,15 @@ CONFIG_MD_RAID1=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -663,6 +699,8 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -699,7 +737,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -713,9 +750,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -813,11 +851,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -829,43 +870,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -889,11 +957,15 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -902,6 +974,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -947,6 +1020,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -954,7 +1028,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -976,8 +1052,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1010,10 +1088,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1047,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1070,6 +1145,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers @@ -1098,6 +1174,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1106,7 +1183,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1119,7 +1195,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1146,7 +1221,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_FSL_USB2 is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set @@ -1164,6 +1239,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1199,10 +1275,13 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1301,6 +1380,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1311,14 +1391,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1358,6 +1437,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1384,6 +1464,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1401,19 +1483,32 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1467,6 +1562,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1499,5 +1598,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 1eca26f3659..bdf50c8a17e 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:22 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:18 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set CONFIG_MPC832x_MDS=y # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC832x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y # CONFIG_FSL_ULI1575 is not set @@ -196,7 +220,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -365,6 +391,7 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -380,12 +407,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -462,7 +491,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -470,12 +502,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +537,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -519,7 +556,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -534,12 +570,13 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_NAPI is not set # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -628,12 +665,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -645,42 +685,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -689,10 +756,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -702,6 +772,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -746,6 +817,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -753,7 +825,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -770,8 +844,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -803,10 +879,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -820,6 +892,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -859,6 +935,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -947,6 +1024,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -957,14 +1035,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -994,6 +1071,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_QE_GPIO is not set # # Library routines @@ -1002,6 +1080,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1027,8 +1106,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1082,6 +1171,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1114,6 +1207,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index de95d327463..4eef8c95480 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:24 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:19 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set CONFIG_MPC832x_RDB=y # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC832x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y # CONFIG_FSL_ULI1575 is not set @@ -196,7 +220,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -362,9 +388,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -381,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -463,7 +493,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -471,12 +504,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -503,6 +539,8 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -520,10 +558,8 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -538,12 +574,13 @@ CONFIG_E1000=y # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -CONFIG_UGETH_NAPI=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -641,12 +678,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -660,43 +700,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -719,11 +786,15 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -732,6 +803,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -777,6 +849,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -784,7 +857,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -806,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -840,10 +917,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -877,6 +950,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -928,6 +1002,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -936,7 +1011,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -949,7 +1023,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1063,6 +1136,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1073,14 +1147,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1154,6 +1227,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_QE_GPIO is not set # # Library routines @@ -1162,6 +1236,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y @@ -1187,8 +1262,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1242,6 +1327,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1274,6 +1363,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index b47fc918570..8d651393185 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:25 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:20 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set CONFIG_MPC834x_ITX=y # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC834x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -458,18 +486,17 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 # CONFIG_BLK_DEV_IDE is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -545,7 +572,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -623,12 +653,15 @@ CONFIG_MD_RAID1=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -659,7 +692,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -673,9 +705,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -753,11 +786,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -769,43 +805,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -828,10 +891,13 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -839,7 +905,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -861,8 +929,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -895,10 +965,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -917,6 +983,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -960,6 +1027,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -968,7 +1036,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -981,7 +1048,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1035,10 +1101,13 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1130,6 +1199,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1140,14 +1210,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1226,6 +1295,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1251,8 +1321,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1306,6 +1386,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1338,5 +1422,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index fdac4845bad..a8afa39d6f7 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:26 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:21 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set CONFIG_MPC834x_ITX=y # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC834x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -458,12 +486,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -540,7 +570,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -548,12 +581,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -584,7 +620,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -598,9 +633,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -678,11 +714,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -694,43 +733,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -753,10 +819,13 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -764,7 +833,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -786,8 +857,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -820,10 +893,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -842,6 +911,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -885,6 +955,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -893,7 +964,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -906,7 +976,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -959,10 +1028,13 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1054,6 +1126,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1064,14 +1137,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1150,6 +1222,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1175,8 +1248,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1230,6 +1313,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1262,5 +1349,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index c82e96e984f..24c320a3667 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:26 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:21 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set CONFIG_MPC834x_MDS=y # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC834x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -363,6 +389,7 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -401,12 +430,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -433,6 +465,8 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -468,7 +502,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -482,9 +515,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -572,11 +606,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -588,42 +625,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -632,10 +696,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -645,6 +712,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -689,6 +757,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -696,7 +765,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -713,8 +784,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -746,10 +819,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -763,6 +832,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -802,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -890,6 +964,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -900,14 +975,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -943,6 +1017,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -968,8 +1043,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1023,6 +1108,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1055,5 +1144,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 20fd9f58cf4..e029e9e1462 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:27 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:22 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,36 +161,48 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set CONFIG_MPC836x_MDS=y +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y # CONFIG_FSL_ULI1575 is not set @@ -195,7 +219,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -363,6 +389,7 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -460,7 +489,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -468,12 +500,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -500,6 +535,8 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -517,7 +554,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -532,12 +568,13 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_NAPI is not set # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -626,12 +663,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -643,42 +683,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -687,10 +754,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -700,6 +770,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -744,6 +815,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -751,7 +823,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -768,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -801,10 +877,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -818,6 +890,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -857,6 +933,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -945,6 +1022,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -955,14 +1033,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -992,6 +1069,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_QE_GPIO is not set # # Library routines @@ -1000,6 +1078,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1025,8 +1104,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1080,6 +1169,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1112,6 +1205,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index d2c435f0da4..7d674be702f 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Mon May 19 21:12:32 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:24 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -52,6 +54,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -89,12 +94,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -112,10 +117,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -150,16 +162,18 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set @@ -170,17 +184,26 @@ CONFIG_MPC836x_RDK=y # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y # CONFIG_FSL_ULI1575 is not set @@ -207,6 +230,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -219,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -226,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,12 +259,15 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y CONFIG_FSL_LBC=y CONFIG_FSL_GTM=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -263,10 +292,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -359,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -449,9 +476,11 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -467,12 +496,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,12 +521,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -526,7 +560,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -541,12 +574,13 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -CONFIG_UGETH_NAPI=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -602,6 +636,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -625,12 +660,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -643,43 +681,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_GPIO is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -703,26 +768,33 @@ CONFIG_SPI_MPC83xx=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -730,7 +802,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -747,9 +821,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -799,6 +874,9 @@ CONFIG_FB_MACMODES=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set @@ -821,6 +899,7 @@ CONFIG_FB_OF=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set @@ -846,10 +925,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -941,6 +1016,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -951,14 +1027,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -998,6 +1073,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1025,12 +1101,22 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set @@ -1091,6 +1177,10 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1123,6 +1213,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 0f94d9f56be..de472022aa8 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:28 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:23 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -112,10 +117,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set CONFIG_MPC837x_MDS=y # CONFIG_MPC837x_RDB is not set # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC837x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -360,19 +390,30 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -415,24 +456,128 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set CONFIG_SATA_FSL=y CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -452,16 +597,56 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +# CONFIG_TR is not set # # Wireless LAN @@ -470,8 +655,11 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -515,12 +703,14 @@ CONFIG_INPUT=y # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -531,40 +721,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -573,10 +813,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -586,8 +829,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set @@ -609,13 +854,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -626,6 +874,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -633,7 +882,15 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # Sonics Silicon Backplane @@ -644,8 +901,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -666,6 +925,8 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set @@ -675,10 +936,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -686,12 +943,16 @@ CONFIG_HID=y # CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -700,6 +961,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set @@ -769,6 +1031,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -779,14 +1042,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -826,6 +1088,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -849,8 +1112,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -904,6 +1177,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -935,5 +1212,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 0d448556f53..e8d2d691d26 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Tue Jun 10 09:17:12 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:25 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -112,10 +117,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set CONFIG_MPC837x_RDB=y # CONFIG_SBC834x is not set +# CONFIG_ASP834x is not set CONFIG_PPC_MPC837x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -355,10 +385,16 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -366,9 +402,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -411,14 +452,106 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set CONFIG_SATA_FSL=y CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -430,15 +563,27 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -458,16 +603,44 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -485,8 +658,11 @@ CONFIG_GFAR_NAPI=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -530,12 +706,14 @@ CONFIG_INPUT=y # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -546,41 +724,91 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -589,10 +817,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -602,8 +833,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set @@ -625,13 +858,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -642,6 +878,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -649,7 +886,15 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # USB-based Watchdog Cards @@ -665,8 +910,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -688,6 +935,8 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set @@ -697,10 +946,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -716,7 +961,7 @@ CONFIG_USB_HID=y # CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -731,6 +976,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -743,6 +989,8 @@ CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -768,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -781,7 +1028,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -803,6 +1049,7 @@ CONFIG_USB_MON=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set @@ -872,6 +1119,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -882,14 +1130,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -929,6 +1176,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -952,8 +1200,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1011,6 +1269,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1042,5 +1304,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 1752918be2c..9245a67da20 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:30 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:27 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -110,10 +115,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,12 +135,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -148,37 +160,49 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y # CONFIG_MPC831x_RDB is not set # CONFIG_MPC832x_MDS is not set # CONFIG_MPC832x_RDB is not set # CONFIG_MPC834x_MDS is not set # CONFIG_MPC834x_ITX is not set # CONFIG_MPC836x_MDS is not set +# CONFIG_MPC836x_RDK is not set # CONFIG_MPC837x_MDS is not set # CONFIG_MPC837x_RDB is not set CONFIG_SBC834x=y +# CONFIG_ASP834x is not set CONFIG_PPC_MPC834x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -204,6 +228,7 @@ CONFIG_BINFMT_ELF=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -216,6 +241,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -223,6 +249,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -230,15 +257,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -254,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -358,19 +388,30 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -383,15 +424,27 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -411,16 +464,44 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -429,6 +510,8 @@ CONFIG_GIANFAR=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETCONSOLE is not set @@ -474,12 +557,14 @@ CONFIG_INPUT=y # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -490,40 +575,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -532,10 +667,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -545,8 +683,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set @@ -568,13 +708,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -585,6 +728,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -592,7 +736,15 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # Sonics Silicon Backplane @@ -603,8 +755,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -625,6 +779,8 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -634,10 +790,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -648,6 +800,7 @@ CONFIG_HID=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set @@ -710,6 +863,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -720,14 +874,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -740,6 +893,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set @@ -751,6 +905,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -774,8 +929,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -829,6 +994,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index b82bb042308..8bb89f26a20 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:30 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:28 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -85,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -110,10 +112,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -124,6 +132,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -142,8 +151,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -152,11 +159,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -173,7 +182,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -250,10 +261,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -427,6 +434,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -440,12 +448,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -463,11 +471,8 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -480,7 +485,6 @@ CONFIG_IDE_GENERIC=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -504,6 +508,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -516,9 +521,7 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_FCC=y CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y CONFIG_NETDEV_10000=y # @@ -606,6 +609,23 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -622,6 +642,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -633,8 +654,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -664,10 +687,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -680,6 +699,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -759,6 +782,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -768,12 +792,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -809,6 +832,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -833,6 +857,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -851,17 +877,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set @@ -915,6 +953,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -946,6 +988,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig similarity index 95% rename from arch/powerpc/configs/mpc8536_ds_defconfig rename to arch/powerpc/configs/85xx/mpc8536_ds_defconfig index f1e2931de5d..6b516bea6e7 100644 --- a/arch/powerpc/configs/mpc8536_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Wed Jul 2 01:34:26 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 07:18:18 2008 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -119,10 +119,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -139,6 +145,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -157,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -205,7 +210,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -228,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -235,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -246,6 +253,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -272,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -401,6 +405,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=524288 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -512,6 +520,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -588,7 +597,6 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -632,7 +640,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -648,9 +655,9 @@ CONFIG_SKY2=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -727,12 +734,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -766,7 +775,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -776,43 +785,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -821,6 +851,8 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -836,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -879,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -925,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -992,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1012,19 +1040,15 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1086,39 +1110,12 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1150,6 +1147,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1201,6 +1199,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1209,7 +1208,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1222,7 +1220,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1310,6 +1307,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # @@ -1387,6 +1385,7 @@ CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set @@ -1399,17 +1398,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1488,6 +1486,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1513,6 +1512,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1531,19 +1532,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set @@ -1561,13 +1572,14 @@ CONFIG_CRYPTO=y # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1601,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1633,5 +1649,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index f33fd516fd5..1ea181f826f 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:31 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:30 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,10 +115,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -128,6 +135,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -156,11 +162,13 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -192,7 +200,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -231,6 +241,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -252,10 +263,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -367,6 +374,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -384,7 +392,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -416,9 +423,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y CONFIG_NETDEV_10000=y # @@ -504,6 +509,8 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -520,6 +527,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -531,8 +539,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -562,10 +572,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -578,6 +584,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -655,6 +665,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -664,12 +675,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -705,6 +715,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -729,6 +740,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -746,16 +759,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -808,6 +834,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -839,5 +869,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index a0583e5119f..1aecdeab984 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:32 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 07:20:43 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -118,10 +119,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +145,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -166,11 +172,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set CONFIG_MPC85xx_DS=y # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -202,7 +210,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -768,43 +784,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1303,6 +1309,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # @@ -1379,6 +1386,7 @@ CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set @@ -1391,17 +1399,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1480,6 +1487,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1505,6 +1513,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1523,17 +1533,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1550,13 +1572,14 @@ CONFIG_CRYPTO=y # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1590,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1622,5 +1649,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index e19592b4204..06e26d906f6 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:33 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:32 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -128,6 +136,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,8 +155,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -156,11 +163,13 @@ CONFIG_MPC85xx=y CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -177,7 +186,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -217,6 +225,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -235,6 +245,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -261,10 +272,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -363,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -381,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -404,12 +414,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -456,10 +469,8 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -473,9 +484,9 @@ CONFIG_E1000_NAPI=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -582,6 +593,24 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -602,6 +631,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -613,8 +643,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -646,10 +678,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -663,6 +691,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -741,6 +773,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -750,12 +783,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -791,6 +823,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -815,6 +848,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -832,17 +867,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -895,6 +942,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -927,6 +978,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 28004e93aee..dc27c74955f 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:34 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:33 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -112,10 +113,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,12 +133,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -150,8 +158,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -160,11 +166,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -197,7 +205,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -220,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -227,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,6 +248,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -264,10 +275,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -385,12 +392,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -475,12 +485,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -524,7 +537,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -538,10 +550,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -648,42 +660,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -692,10 +725,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -749,6 +785,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -756,6 +793,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set # CONFIG_BOOKE_WDT is not set # @@ -773,8 +811,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -806,10 +846,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -823,6 +859,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -862,6 +902,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -950,6 +991,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -960,14 +1002,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -995,6 +1036,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_QE_GPIO is not set # # Library routines @@ -1003,6 +1045,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1027,6 +1070,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1044,17 +1089,28 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1122,6 +1178,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1154,6 +1214,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 164fd9606ee..eda45bb8a13 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:35 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 07:21:42 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -118,10 +119,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +145,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -166,11 +172,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set CONFIG_MPC85xx_DS=y # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -202,7 +210,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -768,43 +784,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1368,6 +1374,7 @@ CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set @@ -1380,17 +1387,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1469,6 +1475,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1494,6 +1501,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1512,17 +1521,29 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1539,13 +1560,14 @@ CONFIG_CRYPTO=y # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1579,6 +1601,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1611,5 +1637,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index b09f0032a10..97f3c4fe440 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:36 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:34 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,10 +115,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -128,6 +135,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -156,11 +162,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -192,7 +200,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -233,6 +243,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -259,10 +270,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -379,20 +386,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set # CONFIG_IDEDISK_MULTI_MODE is not set @@ -405,7 +414,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -423,10 +431,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -444,8 +450,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -461,12 +465,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -509,10 +516,8 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -526,9 +531,9 @@ CONFIG_E1000_NAPI=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -634,6 +639,8 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -654,6 +661,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -665,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -698,10 +708,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -715,6 +721,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -793,6 +803,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -802,12 +813,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -843,6 +853,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -867,6 +878,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -884,16 +897,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -946,6 +972,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -978,5 +1008,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 24f7f44b482..41cedc4b63f 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:37 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:35 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -112,10 +113,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +133,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -154,11 +160,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set CONFIG_SBC8548=y @@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -231,6 +241,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -256,10 +267,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -374,12 +381,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -397,12 +406,15 @@ CONFIG_HAVE_IDE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -446,7 +458,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -460,9 +471,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -568,6 +579,8 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -588,6 +601,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -599,8 +613,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -632,10 +648,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -706,6 +718,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -715,12 +728,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -744,6 +756,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -767,7 +780,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -819,6 +841,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -851,5 +877,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 655518dcd73..daef36f41b4 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:38 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:36 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,10 +114,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -127,6 +134,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,8 +153,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -155,11 +161,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -230,6 +240,7 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set @@ -251,10 +262,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -366,6 +373,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -383,7 +391,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -415,9 +422,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y CONFIG_NETDEV_10000=y # @@ -501,6 +506,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -517,6 +524,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -528,8 +536,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -559,10 +569,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -575,6 +581,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -679,6 +689,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -688,12 +699,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -729,6 +739,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -753,6 +764,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -769,16 +782,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y @@ -842,6 +868,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -873,5 +903,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 7804ca1ecc9..2b05d43f8f7 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:38 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:37 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -115,10 +117,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -134,6 +142,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -152,8 +161,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -162,11 +169,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -183,7 +192,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -223,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -230,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -241,6 +251,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -267,10 +278,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -426,6 +433,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=m CONFIG_PARPORT=m CONFIG_PARPORT_PC=m @@ -452,15 +460,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -480,7 +489,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # @@ -493,10 +501,8 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -514,8 +520,6 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -594,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -601,12 +606,15 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -652,7 +660,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -666,9 +673,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -731,6 +738,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -741,7 +749,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -757,6 +767,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -805,44 +816,68 @@ CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CPM is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -850,10 +885,32 @@ CONFIG_I2C_CHARDEV=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -907,6 +964,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -918,8 +976,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -958,20 +1018,8 @@ CONFIG_DRM=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -985,6 +1033,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -1070,6 +1122,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1080,13 +1133,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1150,6 +1202,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1175,6 +1228,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1193,18 +1248,29 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1258,6 +1324,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1290,6 +1360,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index e0b5559e84a..1b2d5d57791 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:39 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:37 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -112,10 +113,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +133,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -154,11 +160,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -232,6 +242,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -255,10 +266,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -449,20 +456,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -475,7 +484,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -493,10 +501,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -514,8 +520,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -531,12 +535,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -598,7 +605,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -612,9 +618,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -721,41 +727,62 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -764,10 +791,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -821,6 +851,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -832,8 +863,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -865,10 +898,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -882,6 +911,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -971,6 +1004,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -980,12 +1014,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1021,6 +1054,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1048,7 +1082,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1100,6 +1143,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1132,5 +1179,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 6f9067b49e0..da841a09755 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:40 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:39 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -112,10 +114,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +134,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -154,11 +161,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -176,7 +185,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -732,42 +739,66 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CPM is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -876,10 +931,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set -# CONFIG_KGDB_CONSOLE is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index b3b770be3cc..ca1234d2685 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Thu Jun 26 14:40:02 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:40 2008 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -116,10 +116,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -130,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -154,8 +161,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -164,6 +169,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set @@ -187,7 +193,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set # @@ -203,7 +208,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -226,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -233,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -244,7 +251,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y -CONFIG_FSL_LBC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -273,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -455,7 +458,6 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_FSL_ELBC is not set -CONFIG_MTD_NAND_FSL_UPM=y # CONFIG_MTD_ONENAND is not set # @@ -490,20 +492,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set # CONFIG_IDEDISK_MULTI_MODE is not set @@ -516,7 +520,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -534,10 +537,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -555,8 +556,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -572,12 +571,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -620,10 +622,8 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -637,9 +637,9 @@ CONFIG_E1000_NAPI=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -744,42 +744,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -788,10 +809,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -845,6 +869,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -856,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -889,10 +916,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -906,6 +929,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -945,6 +972,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1031,9 +1059,11 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1043,12 +1073,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,6 +1113,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1108,6 +1138,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1125,17 +1157,29 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1189,6 +1233,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1221,5 +1269,6 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 03120b5b52f..dcf9cfe28b5 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:41 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:42 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -112,10 +114,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +134,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -154,11 +161,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set CONFIG_TQM8555=y # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -176,7 +185,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -732,42 +739,66 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CPM is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -876,10 +931,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set -# CONFIG_KGDB_CONSOLE is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 3113257edf5..8d676629cdb 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:42 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:43 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -112,10 +114,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +134,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -154,11 +161,13 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set CONFIG_TQM8560=y # CONFIG_SBC8548 is not set @@ -176,7 +185,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -732,42 +739,66 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CPM is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627EHF is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -876,10 +931,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set -# CONFIG_KGDB_CONSOLE is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 6740f2a3aa3..63cd51fbb4b 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:08 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:00 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -109,10 +110,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 @@ -122,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -140,8 +148,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -159,6 +165,7 @@ CONFIG_PPC_ADDER875=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set # CONFIG_8xx_CPU6 is not set CONFIG_8xx_CPU15=y CONFIG_NO_UCODE_PATCH=y @@ -177,7 +184,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -218,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -225,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -257,10 +265,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -443,7 +447,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -547,6 +550,7 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -587,6 +591,8 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -602,8 +608,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -633,10 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -706,6 +710,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -716,13 +721,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -761,6 +765,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set @@ -785,6 +790,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -800,16 +807,28 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set @@ -822,6 +841,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index dc599c7e97d..c16521ffb47 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Thu May 15 11:00:14 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:02 2008 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -97,7 +98,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y @@ -124,11 +124,17 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -145,6 +151,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -164,19 +171,18 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set # CONFIG_STORCENTER is not set @@ -253,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -260,6 +267,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_SECCOMP=y @@ -301,10 +309,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -318,6 +322,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -349,7 +354,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -472,6 +477,7 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -495,6 +501,7 @@ CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m +# CONFIG_IP6_NF_SECURITY is not set # # Bridge: Netfilter Configuration @@ -507,6 +514,7 @@ CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m +# CONFIG_BRIDGE_EBT_IP6 is not set CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m @@ -535,8 +543,10 @@ CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -556,7 +566,6 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -601,7 +610,6 @@ CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m # @@ -609,6 +617,7 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -625,6 +634,7 @@ CONFIG_FIB_RULES=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -645,6 +655,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -749,6 +761,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -844,6 +857,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -851,12 +865,15 @@ CONFIG_SCSI_LPFC=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -900,7 +917,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -916,6 +932,7 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -940,112 +957,13 @@ CONFIG_MV643XX_ETH=y # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m # CONFIG_NET_FC is not set CONFIG_NETCONSOLE=m # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y -CONFIG_ISDN=m -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -# CONFIG_ISDN_PPP_BSDCOMP is not set -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DRV_LOOP=m -# CONFIG_ISDN_DIVERSION is not set - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -CONFIG_HISAX_NO_SENDCOMPLETE=y -CONFIG_HISAX_NO_LLC=y -CONFIG_HISAX_NO_KEYPAD=y -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -# CONFIG_HISAX_HFC4S8S is not set -CONFIG_HISAX_FRITZ_PCIPNP=m -CONFIG_HISAX_HDLC=y - -# -# Active cards -# -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -# CONFIG_ISDN_DRV_GIGASET is not set -CONFIG_ISDN_CAPI=m -CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_CAPIFS_BOOL=y -CONFIG_ISDN_CAPI_CAPIFS=m -CONFIG_ISDN_CAPI_CAPIDRV=m - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -1092,6 +1010,7 @@ CONFIG_INPUT_UINPUT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -1145,44 +1064,65 @@ CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_PLATFORM is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_MPC is not set CONFIG_I2C_MV64XXX=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1191,10 +1131,13 @@ CONFIG_SENSORS_PCF8591=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m @@ -1255,6 +1198,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m +# CONFIG_ALIM7101_WDT is not set # CONFIG_MV64X60_WDT is not set # @@ -1278,8 +1222,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1290,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -1316,10 +1263,6 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set CONFIG_HID=m @@ -1339,6 +1282,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1362,11 +1306,16 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1388,6 +1337,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1396,7 +1346,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y # # USB port drivers @@ -1405,7 +1354,6 @@ CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set @@ -1443,6 +1391,7 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set @@ -1464,7 +1413,6 @@ CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -CONFIG_USB_AUERSWALD=m CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -1481,6 +1429,7 @@ CONFIG_USB_LED=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_CXACRU is not set @@ -1601,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=m CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1611,8 +1561,8 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y @@ -1620,7 +1570,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1705,6 +1654,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1732,6 +1682,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1750,6 +1702,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1758,11 +1711,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y @@ -1776,7 +1740,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y @@ -1835,6 +1798,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index ba2a463b930..ef0c6e80050 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:09 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:03 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -105,10 +110,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -118,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -136,33 +148,43 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC_82xx=y -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set # CONFIG_PQ2FADS is not set CONFIG_EP8248E=y # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -197,6 +219,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -204,6 +227,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -211,13 +235,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_8260=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -233,10 +266,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -410,11 +439,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -434,16 +465,23 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -457,14 +495,25 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# A new alternative FireWire stack is available with EXPERIMENTAL=y +# +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -482,21 +531,59 @@ CONFIG_DAVICOM_PHY=y # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y # CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +# CONFIG_TR is not set # # Wireless LAN @@ -505,6 +592,7 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set @@ -541,6 +629,7 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_SCC1=y @@ -549,21 +638,44 @@ CONFIG_SERIAL_CPM_SCC1=y CONFIG_SERIAL_CPM_SCC4=y # CONFIG_SERIAL_CPM_SMC1 is not set # CONFIG_SERIAL_CPM_SMC2 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -575,8 +687,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -597,6 +711,8 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -606,16 +722,13 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set @@ -675,6 +788,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -684,8 +798,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -763,6 +877,7 @@ CONFIG_NLS_UTF8=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set @@ -804,19 +919,31 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -824,6 +951,7 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # @@ -864,6 +992,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -894,6 +1026,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index ac72b48542d..480225be2f3 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:09 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:04 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -108,10 +109,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 @@ -121,6 +128,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -158,6 +164,7 @@ CONFIG_PPC_EP88XC=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set # CONFIG_8xx_CPU6 is not set CONFIG_8xx_CPU15=y CONFIG_NO_UCODE_PATCH=y @@ -176,7 +183,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -193,7 +199,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -217,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -224,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -256,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -442,7 +446,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -544,10 +547,13 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -559,8 +565,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -590,10 +598,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -662,6 +666,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -672,13 +677,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -717,6 +721,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set @@ -741,6 +746,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -756,16 +763,28 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -777,6 +796,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 48434c2c762..6fc4c212775 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:10 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:05 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -119,10 +119,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -139,6 +145,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -158,25 +165,25 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_EMBEDDED6xx=y CONFIG_LINKSTATION=y # CONFIG_STORCENTER is not set # CONFIG_MPC7448HPC2 is not set # CONFIG_PPC_HOLLY is not set # CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set @@ -207,7 +214,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -230,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -237,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -273,10 +282,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -461,6 +466,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m CONFIG_IEEE80211_DEBUG=y @@ -480,7 +486,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -592,12 +600,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -676,6 +686,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -743,12 +754,15 @@ CONFIG_PATA_SIL680=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -785,14 +799,12 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set @@ -803,6 +815,7 @@ CONFIG_R8169=y # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -889,12 +902,14 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -934,43 +949,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -979,10 +1015,13 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1036,6 +1075,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -1047,8 +1087,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1086,10 +1128,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -1121,6 +1159,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1172,6 +1211,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1180,7 +1220,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1190,7 +1229,6 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set @@ -1237,7 +1275,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1291,6 +1328,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1392,6 +1430,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1402,11 +1441,11 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1414,7 +1453,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1482,6 +1520,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1510,6 +1549,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1527,17 +1568,29 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1556,6 +1609,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1594,6 +1648,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1627,5 +1685,6 @@ CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 066c583c1f8..ab5199f26a2 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:11 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:06 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -88,7 +89,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -112,10 +112,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +132,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,25 +152,25 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set # CONFIG_STORCENTER is not set CONFIG_MPC7448HPC2=y # CONFIG_PPC_HOLLY is not set # CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set CONFIG_TSI108_BRIDGE=y # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -192,7 +199,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -215,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -222,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -256,10 +265,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -374,12 +379,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -457,6 +464,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -523,12 +531,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -594,7 +605,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -611,6 +621,7 @@ CONFIG_TSI108_ETH=y # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -716,6 +727,8 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -736,6 +749,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -747,8 +761,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -780,10 +796,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -797,6 +809,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -875,6 +891,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -884,12 +901,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -929,6 +945,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -954,7 +971,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1007,6 +1033,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 30d7834b7db..7c435c84c87 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:12 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:07 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -106,10 +111,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -119,6 +130,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -137,14 +149,16 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC_82xx=y -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_82xx=y CONFIG_MPC8272_ADS=y # CONFIG_PQ2FADS is not set # CONFIG_EP8248E is not set @@ -152,19 +166,27 @@ CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y CONFIG_PQ2_ADS_PCI_PIC=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -181,7 +203,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -242,10 +268,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -446,9 +468,11 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -460,6 +484,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -480,13 +505,12 @@ CONFIG_HAVE_IDE=y # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -510,8 +534,11 @@ CONFIG_DAVICOM_PHY=y # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -533,7 +560,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -545,6 +571,7 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -610,6 +637,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -620,6 +648,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -634,6 +663,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -654,6 +684,7 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_SCC1=y @@ -666,6 +697,8 @@ CONFIG_SERIAL_CPM_SCC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -676,10 +709,28 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -691,8 +742,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -724,10 +777,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -798,6 +847,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -807,8 +857,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y @@ -888,6 +938,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -914,6 +965,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -931,19 +984,31 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -951,6 +1016,7 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # @@ -991,6 +1057,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1021,6 +1091,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 4293c8be06e..916e3df7cc4 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:14 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 07:16:25 2008 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_6xx=y # CONFIG_E200 is not set CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -32,12 +33,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -51,6 +54,10 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_REDBOOT=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -88,13 +95,13 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -112,10 +119,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,12 +139,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -150,40 +164,52 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -CONFIG_PPC_83xx=y -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set -CONFIG_MPC83xx=y +CONFIG_PPC_83xx=y CONFIG_MPC831x_RDB=y CONFIG_MPC832x_MDS=y CONFIG_MPC832x_RDB=y CONFIG_MPC834x_MDS=y CONFIG_MPC834x_ITX=y CONFIG_MPC836x_MDS=y +CONFIG_MPC836x_RDK=y CONFIG_MPC837x_MDS=y CONFIG_MPC837x_RDB=y CONFIG_SBC834x=y +CONFIG_ASP834x=y CONFIG_PPC_MPC831x=y CONFIG_PPC_MPC832x=y CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y # CONFIG_FSL_ULI1575 is not set @@ -211,6 +237,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -223,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -230,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -237,15 +266,24 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_FSL_PCI=y +CONFIG_FSL_LBC=y +CONFIG_FSL_GTM=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -261,10 +299,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -412,11 +446,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -434,10 +470,12 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_NAND_FSL_ELBC=y +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -445,14 +483,21 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 @@ -460,9 +505,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -505,24 +555,128 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set CONFIG_SATA_FSL=y CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -542,21 +696,60 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_NAPI is not set # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +# CONFIG_TR is not set # # Wireless LAN @@ -574,8 +767,11 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -619,12 +815,14 @@ CONFIG_INPUT=y # CONFIG_VT is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -635,43 +833,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +# CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -679,10 +929,31 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -692,8 +963,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set @@ -715,13 +988,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -732,6 +1008,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -739,7 +1016,15 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_83xx_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set # # USB-based Watchdog Cards @@ -755,8 +1040,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -778,6 +1065,8 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set @@ -787,10 +1076,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -806,7 +1091,7 @@ CONFIG_USB_HID=y # CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -821,6 +1106,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -833,6 +1119,8 @@ CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -858,7 +1146,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -871,7 +1158,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -893,6 +1179,7 @@ CONFIG_USB_MON=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set @@ -963,6 +1250,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -973,14 +1261,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1014,6 +1301,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +CONFIG_QE_GPIO=y # # Library routines @@ -1022,6 +1310,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1045,8 +1334,18 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,12 +1360,14 @@ CONFIG_CRYPTO=y # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1100,6 +1401,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1131,6 +1436,8 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fa0170504b8..f0a13bebf50 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 09:03:46 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 07:15:20 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y @@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -92,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -118,10 +120,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +146,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -156,8 +165,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -166,11 +173,13 @@ CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y +CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y CONFIG_TQM8541=y +CONFIG_TQM8548=y CONFIG_TQM8555=y CONFIG_TQM8560=y CONFIG_SBC8548=y @@ -189,7 +198,6 @@ CONFIG_PPC_I8259=y # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y @@ -206,7 +214,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -229,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -236,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -248,6 +258,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -274,10 +285,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -403,12 +410,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -429,12 +439,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -514,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -581,12 +594,15 @@ CONFIG_PATA_ALI=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -631,7 +647,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -645,10 +660,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -725,12 +740,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -776,44 +793,68 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CPM is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -821,10 +862,32 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -836,8 +899,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -879,6 +944,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -925,6 +991,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -992,15 +1059,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1014,19 +1073,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1088,39 +1143,12 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1152,6 +1180,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1175,6 +1204,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1203,6 +1233,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1211,7 +1242,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1224,7 +1254,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1285,6 +1314,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1318,6 +1348,7 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set # CONFIG_UIO is not set # @@ -1332,6 +1363,7 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1394,6 +1426,7 @@ CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set @@ -1406,17 +1439,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1487,6 +1519,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_QE_GPIO is not set # # Library routines @@ -1495,6 +1528,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1515,11 +1549,13 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,19 +1574,31 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set +CONFIG_VIRQ_DEBUG=y # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1606,6 +1654,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1638,6 +1690,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index cdf98ae3682..1a9990731eb 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Tue Jul 15 08:31:01 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:10 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -91,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y @@ -118,10 +118,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -159,9 +166,8 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set @@ -207,7 +213,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -230,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -237,6 +244,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -278,10 +286,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -391,6 +395,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -503,18 +509,17 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 # CONFIG_BLK_DEV_IDE is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -593,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_MESH is not set # CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -669,7 +675,6 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -756,12 +761,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -807,44 +814,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_POWERMAC=y -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -853,6 +885,8 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -869,8 +903,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -945,6 +981,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set CONFIG_FB_FSL_DIU=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set @@ -963,15 +1000,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -985,18 +1014,12 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1058,42 +1081,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# +CONFIG_SND_PPC=y # CONFIG_SND_POWERMAC is not set - -# -# ALSA PowerPC devices -# - -# -# Apple Onboard Audio driver -# # CONFIG_SND_AOA is not set -# CONFIG_SND_AOA_SOUNDBUS is not set - -# -# System on Chip audio support -# CONFIG_SND_SOC=y - -# -# ALSA SoC audio for Freescale SOCs -# CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y - -# -# SoC Audio for the Texas Instruments OMAP -# CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1107,6 +1102,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -1235,6 +1234,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1245,16 +1245,15 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1334,6 +1333,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1358,6 +1358,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1376,19 +1378,29 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1443,6 +1455,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1475,6 +1491,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index 867b8c0215f..ea09be31b6e 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:15 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:11 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -118,10 +119,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -139,6 +146,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -157,30 +165,40 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_FSL_ULI1575=y # @@ -196,16 +214,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -264,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -393,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -403,6 +425,7 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -419,12 +442,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -503,7 +528,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_MESH is not set +# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -571,12 +599,15 @@ CONFIG_PATA_ALI=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -603,6 +634,8 @@ CONFIG_VITESSE_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -620,7 +653,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -634,9 +666,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -713,12 +746,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -746,11 +781,14 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -762,43 +800,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -807,10 +872,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -822,8 +890,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -865,6 +935,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -911,6 +982,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -978,15 +1050,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1000,19 +1064,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1074,39 +1134,14 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +# CONFIG_SND_POWERMAC is not set +# CONFIG_SND_AOA is not set +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y @@ -1138,6 +1173,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1189,6 +1225,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1197,7 +1234,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1210,7 +1246,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1264,6 +1299,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1362,6 +1398,7 @@ CONFIG_EFS_FS=m CONFIG_CRAMFS=y CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m CONFIG_QNX4FS_FS=m # CONFIG_ROMFS_FS is not set @@ -1374,17 +1411,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1463,6 +1499,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1488,6 +1525,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1506,19 +1545,32 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1573,6 +1625,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1605,5 +1661,6 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 46fffbcd3f9..1501c4336b3 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:16 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:11 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -106,10 +107,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -120,6 +127,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -138,8 +146,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -157,6 +163,7 @@ CONFIG_MPC86XADS=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set CONFIG_8xx_CPU6=y CONFIG_8xx_CPU15=y CONFIG_NO_UCODE_PATCH=y @@ -175,7 +182,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -192,7 +198,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -215,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -222,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -253,10 +261,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -361,6 +365,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -378,7 +383,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -414,7 +418,6 @@ CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set # CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y @@ -484,6 +487,7 @@ CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -524,6 +528,8 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -540,6 +546,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -551,8 +558,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -582,10 +591,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -598,6 +603,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -677,6 +686,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -687,13 +697,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -733,6 +742,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -758,7 +768,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -810,6 +828,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -841,6 +863,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 9df78973005..fc3f6dc5812 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:17 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:12 2008 # # CONFIG_PPC64 is not set @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -108,10 +109,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 @@ -121,6 +128,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -165,6 +171,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set # CONFIG_8xx_CPU6 is not set CONFIG_8xx_CPU15=y CONFIG_NO_UCODE_PATCH=y @@ -183,7 +190,6 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -200,7 +206,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -224,6 +230,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -231,6 +238,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -263,10 +271,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -453,7 +457,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -555,10 +558,13 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -570,8 +576,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -601,10 +609,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -673,6 +677,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -683,13 +688,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -728,6 +732,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set @@ -752,6 +757,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -767,16 +774,28 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -788,6 +807,6 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index bc3bf62ddc2..b390b747664 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:18 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:13 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set @@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -107,10 +112,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -120,6 +131,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -138,33 +150,43 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC_82xx=y -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set CONFIG_PQ2FADS=y # CONFIG_EP8248E is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_PQ2_ADS_PCI_PIC=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -181,7 +203,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -243,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -447,9 +469,11 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -461,14 +485,15 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -486,7 +511,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set # @@ -498,9 +522,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -517,9 +539,8 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDE_PMAC is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -537,13 +558,12 @@ CONFIG_IDE_PROC_FS=y # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -567,8 +587,11 @@ CONFIG_DAVICOM_PHY=y # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -590,7 +613,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -602,6 +624,7 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -667,6 +690,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -677,7 +701,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -692,6 +718,7 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -712,6 +739,7 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_SERIAL_CPM_SCC1=y @@ -724,6 +752,8 @@ CONFIG_SERIAL_CPM_SCC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -734,10 +764,28 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -749,8 +797,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -782,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y @@ -795,6 +841,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -807,7 +855,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y # CONFIG_USB_GADGET_PXA27X is not set @@ -826,6 +874,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -893,6 +942,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -902,8 +952,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y @@ -983,6 +1033,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1009,6 +1060,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1026,19 +1079,31 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1046,6 +1111,7 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # @@ -1086,6 +1152,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1117,6 +1187,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index c6b83577c05..01b54eac1ff 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:18 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:14 2008 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -94,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -118,10 +118,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -132,6 +138,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -151,25 +158,25 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set # CONFIG_STORCENTER is not set # CONFIG_MPC7448HPC2 is not set # CONFIG_PPC_HOLLY is not set CONFIG_PPC_PRPMC2800=y +# CONFIG_PPC_C2K is not set CONFIG_MV64X60=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -198,7 +205,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -228,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -264,10 +273,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -359,7 +364,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -461,12 +468,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -487,7 +496,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -505,10 +513,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -526,8 +532,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -603,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -669,6 +674,10 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -676,7 +685,6 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -741,10 +749,8 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -760,6 +766,7 @@ CONFIG_E1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -840,6 +847,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -875,43 +883,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_PLATFORM is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_MPC is not set CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -920,10 +949,13 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -977,6 +1009,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -988,8 +1021,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1028,10 +1063,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1060,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1102,7 +1134,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1115,7 +1146,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1169,6 +1199,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1258,6 +1289,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1267,12 +1299,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1312,6 +1343,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1337,7 +1369,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1390,6 +1431,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig index 8227510b41a..f545421f985 100644 --- a/arch/powerpc/configs/sbc8641d_defconfig +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:19 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:15 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -117,10 +118,16 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +145,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -156,30 +164,40 @@ CONFIG_CLASSIC_RCU=y # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set # @@ -195,7 +213,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -203,9 +221,11 @@ CONFIG_PREEMPT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set +# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -265,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -282,6 +302,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -406,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -429,6 +451,7 @@ CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m +# CONFIG_IP6_NF_SECURITY is not set # # Bridge: Netfilter Configuration @@ -451,8 +474,10 @@ CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -472,7 +497,6 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -625,6 +649,7 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -640,12 +665,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -680,12 +707,15 @@ CONFIG_DM_ZERO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -712,6 +742,8 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -729,7 +761,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -743,9 +774,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -768,7 +800,7 @@ CONFIG_ATM_DRIVERS=y # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -834,6 +866,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -857,11 +890,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -874,42 +910,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -918,10 +981,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -931,6 +997,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -975,6 +1042,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -982,6 +1050,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -998,8 +1069,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1038,10 +1111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1055,6 +1124,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # @@ -1096,6 +1169,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1145,6 +1219,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=m +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m @@ -1155,14 +1230,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1183,6 +1257,7 @@ CONFIG_CIFS_POSIX=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" @@ -1233,6 +1308,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1259,6 +1335,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1275,21 +1353,34 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1299,7 +1390,6 @@ CONFIG_DEBUGGER=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y @@ -1349,6 +1439,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1382,5 +1476,6 @@ CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 88f6aa8273b..4340cc1c5b6 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:20 2008 +# Linux kernel version: 2.6.27-rc4 +# Thu Aug 21 00:52:16 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -87,7 +88,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,10 +110,16 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -130,6 +136,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,25 +156,25 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_EMBEDDED6xx=y # CONFIG_LINKSTATION is not set CONFIG_STORCENTER=y # CONFIG_MPC7448HPC2 is not set # CONFIG_PPC_HOLLY is not set # CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set @@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -229,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -264,10 +273,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -456,20 +461,22 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y @@ -483,7 +490,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -500,10 +506,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -521,8 +525,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -599,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -616,12 +619,15 @@ CONFIG_MD_RAID5_RESHAPE=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -635,14 +641,12 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set @@ -653,6 +657,7 @@ CONFIG_R8169=y # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -734,43 +739,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -779,10 +805,13 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -794,8 +823,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -827,10 +858,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -849,6 +876,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -896,6 +924,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -904,7 +933,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -917,7 +945,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -971,6 +998,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1074,6 +1102,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1151,6 +1180,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1178,7 +1208,16 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set From 04da11bfcf511544ae19e0a7e5f994b3237752ac Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 20 Aug 2008 17:16:34 +0300 Subject: [PATCH 021/638] UBIFS: fix zero-length truncations Always allow truncations to zero, even if budgeting thinks there is no space. UBIFS reserves some space for deletions anyway. Otherwise, the following happans: 1. create a file, and write as much as possible there, until ENOSPC 2. truncate the file, which fails with ENOSPC, which is not good. Signed-off-by: Artem Bityutskiy --- fs/ubifs/dir.c | 1 - fs/ubifs/file.c | 20 ++++++++++++++++---- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 5c96f1fb701..2b267c9a180 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -587,7 +587,6 @@ static int ubifs_unlink(struct inode *dir, struct dentry *dentry) if (err) { if (err != -ENOSPC) return err; - err = 0; budgeted = 0; } diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 4071d1cae29..3d698e2022b 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -793,7 +793,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode, int err; struct ubifs_budget_req req; loff_t old_size = inode->i_size, new_size = attr->ia_size; - int offset = new_size & (UBIFS_BLOCK_SIZE - 1); + int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1; struct ubifs_inode *ui = ubifs_inode(inode); dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size); @@ -811,8 +811,15 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode, /* A funny way to budget for truncation node */ req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ; err = ubifs_budget_space(c, &req); - if (err) - return err; + if (err) { + /* + * Treat truncations to zero as deletion and always allow them, + * just like we do for '->unlink()'. + */ + if (new_size || err != -ENOSPC) + return err; + budgeted = 0; + } err = vmtruncate(inode, new_size); if (err) @@ -869,7 +876,12 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode, err = ubifs_jnl_truncate(c, inode, old_size, new_size); mutex_unlock(&ui->ui_mutex); out_budg: - ubifs_release_budget(c, &req); + if (budgeted) + ubifs_release_budget(c, &req); + else { + c->nospace = c->nospace_rp = 0; + smp_wmb(); + } return err; } From 167e782e301188c7c7e31e486bbeea5f918324c1 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 Aug 2008 15:13:29 -0600 Subject: [PATCH 022/638] PCI: pciehp: Rename duplicate slot name N as N-1, N-2, N-M... Commit 3800345f723fd130d50434d4717b99d4a9f383c8 (pciehp: fix slot name) introduces the pciehp_slot_with_bus module parameter, which was intended to help work around broken firmware that assigns the same name to multiple slots. Commit 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 (pciehp: add message about pciehp_slot_with_bus option) tells the user to use the above parameter in the event of a name collision. This approach is sub-optimal because it requires too much work from the user. Instead, let's rename the slot on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 The Mth registered slot becomes N-M In the event we overflow the slot->name parameter, we report an error to the user. This is a temporary fix until the entire PCI core can be reworked such that individual drivers no longer have to manage their own slot names. Tested-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 1 - drivers/pci/hotplug/pciehp_core.c | 21 ++++++++++++++------- drivers/pci/hotplug/pciehp_hpc.c | 11 +---------- 3 files changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index e3a1e7e7dba..9e6cec67e1c 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -43,7 +43,6 @@ extern int pciehp_poll_mode; extern int pciehp_poll_time; extern int pciehp_debug; extern int pciehp_force; -extern int pciehp_slot_with_bus; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 3677495c4f9..4fd5355bc3b 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,6 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -int pciehp_slot_with_bus; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" @@ -56,12 +55,10 @@ module_param(pciehp_debug, bool, 0644); module_param(pciehp_poll_mode, bool, 0644); module_param(pciehp_poll_time, int, 0644); module_param(pciehp_force, bool, 0644); -module_param(pciehp_slot_with_bus, bool, 0644); MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not"); MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not"); MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds"); MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing"); -MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name"); #define PCIE_MODULE_NAME "pciehp" @@ -194,6 +191,7 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; + int len, dup = 1; int retval = -ENOMEM; list_for_each_entry(slot, &ctrl->slot_list, slot_list) { @@ -220,15 +218,24 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); +duplicate_name: retval = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, slot->device); if (retval) { + /* + * If slot N already exists, we'll try to create + * slot N-1, N-2 ... N-M, until we overflow. + */ + if (retval == -EEXIST) { + len = snprintf(slot->name, SLOT_NAME_SIZE, + "%d-%d", slot->number, dup++); + if (len < SLOT_NAME_SIZE) + goto duplicate_name; + else + err("duplicate slot name overflow\n"); + } err("pci_hp_register failed with error %d\n", retval); - if (retval == -EEXIST) - err("Failed to register slot because of name " - "collision. Try \'pciehp_slot_with_bus\' " - "module option.\n"); goto error_info; } /* create additional sysfs entries */ diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index ad27e9e225a..ab31f5ba665 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1030,15 +1030,6 @@ static void pcie_shutdown_notification(struct controller *ctrl) pciehp_free_irq(ctrl); } -static void make_slot_name(struct slot *slot) -{ - if (pciehp_slot_with_bus) - snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); -} - static int pcie_init_slot(struct controller *ctrl) { struct slot *slot; @@ -1053,7 +1044,7 @@ static int pcie_init_slot(struct controller *ctrl) slot->device = ctrl->slot_device_offset + slot->hp_slot; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot; - make_slot_name(slot); + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); list_add(&slot->slot_list, &ctrl->slot_list); From d6a9e9b40be7da84f82eb414c2ad98c5bb69986b Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 Aug 2008 15:13:47 -0600 Subject: [PATCH 023/638] PCI: shpchp: Rename duplicate slot name N as N-1, N-2, N-M... Commit ef0ff95f136f0f2d035667af5d18b824609de320 (shpchp: fix slot name) introduces the shpchp_slot_with_bus module parameter, which was intended to help work around broken firmware that assigns the same name to multiple slots. Commit b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a (shpchp: add message about shpchp_slot_with_bus option) tells the user to use the above parameter in the event of a name collision. This approach is sub-optimal because it requires too much work from the user. Instead, let's rename the slot on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 The Mth registered slot becomes N-M In the event we overflow the slot->name parameter, we report an error to the user. This is a temporary fix until the entire PCI core can be reworked such that individual drivers no longer have to manage their own slot names. Tested-by: Kenji Kaneshige Acked-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_core.c | 34 ++++++++++++++----------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index a8cbd039b85..cc38615395f 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -39,7 +39,6 @@ int shpchp_debug; int shpchp_poll_mode; int shpchp_poll_time; -static int shpchp_slot_with_bus; struct workqueue_struct *shpchp_wq; #define DRIVER_VERSION "0.4" @@ -53,11 +52,9 @@ MODULE_LICENSE("GPL"); module_param(shpchp_debug, bool, 0644); module_param(shpchp_poll_mode, bool, 0644); module_param(shpchp_poll_time, int, 0644); -module_param(shpchp_slot_with_bus, bool, 0644); MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not"); MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not"); MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds"); -MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name"); #define SHPC_MODULE_NAME "shpchp" @@ -99,23 +96,13 @@ static void release_slot(struct hotplug_slot *hotplug_slot) kfree(slot); } -static void make_slot_name(struct slot *slot) -{ - if (shpchp_slot_with_bus) - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", - slot->number); -} - static int init_slots(struct controller *ctrl) { struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; int retval = -ENOMEM; - int i; + int i, len, dup = 1; for (i = 0; i < ctrl->num_slots; i++) { slot = kzalloc(sizeof(*slot), GFP_KERNEL); @@ -146,7 +133,7 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; get_power_status(hotplug_slot, &info->power_status); @@ -157,14 +144,23 @@ static int init_slots(struct controller *ctrl) dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); +duplicate_name: retval = pci_hp_register(slot->hotplug_slot, ctrl->pci_dev->subordinate, slot->device); if (retval) { + /* + * If slot N already exists, we'll try to create + * slot N-1, N-2 ... N-M, until we overflow. + */ + if (retval == -EEXIST) { + len = snprintf(slot->name, SLOT_NAME_SIZE, + "%d-%d", slot->number, dup++); + if (len < SLOT_NAME_SIZE) + goto duplicate_name; + else + err("duplicate slot name overflow\n"); + } err("pci_hp_register failed with error %d\n", retval); - if (retval == -EEXIST) - err("Failed to register slot because of name " - "collision. Try \'shpchp_slot_with_bus\' " - "module option.\n"); goto error_info; } From ebca4f1bce1eb7b91a63c515db66316db9391221 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 21 Aug 2008 13:47:58 -0700 Subject: [PATCH 024/638] PCI: fix reference leak in pci_get_dev_by_id() Alex Chiang and Matthew Wilcox pointed out that pci_get_dev_by_id() does not properly decrement the reference on the from pointer if it is present, like the documentation for the function states it will. It fixes a pretty bad leak in the hotplug core (we were leaking an entire struct pci_dev for each function of each offlined card, the first time around; subsequent onlines/offlines were ok). Cc: Matthew Wilcox Cc: stable Tested-by: Alex Chiang Acked-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- drivers/pci/search.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 217814fef4e..3b3b5f17879 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -280,6 +280,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, match_pci_dev_by_id); if (dev) pdev = to_pci_dev(dev); + if (from) + pci_dev_put(from); return pdev; } From 7a6bb2622692495d1b7445a3e8c257601b803b02 Mon Sep 17 00:00:00 2001 From: Per Andersson Date: Mon, 11 Aug 2008 12:00:52 +0200 Subject: [PATCH 025/638] [ARM] Orion: Fix boot crash on Kurobox Pro The Kurobox Pro crashes when any of the PCI controller registers are accessed. This patch adds a function to the Orion PCI handling code that board support code can call to disable enumerating the PCI bus entirely, and makes the Kurobox Pro PCI-related init code call this function. Signed-off-by: Per Andersson Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/common.h | 1 + arch/arm/mach-orion5x/kurobox_pro-setup.c | 4 +++- arch/arm/mach-orion5x/pci.c | 13 ++++++++++--- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index e75bd7004b9..0bd195551a2 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -41,6 +41,7 @@ struct pci_bus; struct pci_sys_data; void orion5x_pcie_id(u32 *dev, u32 *rev); +void orion5x_pci_disable(void); void orion5x_pci_set_cardbus_mode(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index cb72f1bb9cb..e321ec33183 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = { static int __init kurobox_pro_pci_init(void) { - if (machine_is_kurobox_pro()) + if (machine_is_kurobox_pro()) { + orion5x_pci_disable(); pci_common_init(&kurobox_pro_pci); + } return 0; } diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index fbceecc4b7e..a7b7d77b1b0 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); +static int orion5x_pci_disabled __initdata; + +void __init orion5x_pci_disable(void) +{ + orion5x_pci_disabled = 1; +} + void __init orion5x_pci_set_cardbus_mode(void) { orion5x_pci_cardbus_mode = 1; @@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); ret = pcie_setup(sys); - } else if (nr == 1) { + } else if (nr == 1 && !orion5x_pci_disabled) { orion5x_pci_set_bus_nr(sys->busnr); ret = pci_setup(sys); } @@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys if (nr == 0) { bus = pci_scan_bus(sys->busnr, &pcie_ops, sys); - } else if (nr == 1) { + } else if (nr == 1 && !orion5x_pci_disabled) { bus = pci_scan_bus(sys->busnr, &pci_ops, sys); } else { bus = NULL; @@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* * PCIe endpoint? */ - if (bus < orion5x_pci_local_bus_nr()) + if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr()) return IRQ_ORION5X_PCIE0_INT; return -1; From 35228e840acc70b49a2eab4eb308ca3d544efdcf Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sat, 9 Aug 2008 18:13:33 +0300 Subject: [PATCH 026/638] [ARM] Orion: fix MAC detection on QNAP TS-209 and TS-409 Flash needs to be set up before we can try to read the MAC address from there. Signed-off-by: Martin Michlmayr Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/ts209-setup.c | 8 ++++---- arch/arm/mach-orion5x/ts409-setup.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index dd657163cd8..bcd4b2a10d6 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void) /* * Configure peripherals. */ + orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, + QNAP_TS209_NOR_BOOT_SIZE); + platform_device_register(&qnap_ts209_nor_flash); + orion5x_ehci0_init(); orion5x_ehci1_init(); qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE + @@ -298,10 +302,6 @@ static void __init qnap_ts209_init(void) orion5x_uart0_init(); orion5x_xor_init(); - orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, - QNAP_TS209_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts209_nor_flash); - platform_device_register(&qnap_ts209_button_device); /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index b27d2b76208..4bd8ed1d75e 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -278,6 +278,10 @@ static void __init qnap_ts409_init(void) /* * Configure peripherals. */ + orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE, + QNAP_TS409_NOR_BOOT_SIZE); + platform_device_register(&qnap_ts409_nor_flash); + orion5x_ehci0_init(); qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE + qnap_ts409_partitions[5].offset, @@ -286,10 +290,6 @@ static void __init qnap_ts409_init(void) orion5x_i2c_init(); orion5x_uart0_init(); - orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE, - QNAP_TS409_NOR_BOOT_SIZE); - platform_device_register(&qnap_ts409_nor_flash); - platform_device_register(&qnap_ts409_button_device); /* Get RTC IRQ and register the chip */ From c0fe819baf86979a5801387ccd7d8df0dc2f34e2 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 12 Aug 2008 12:50:14 +0300 Subject: [PATCH 027/638] [ARM] Orion: activate lm75 driver on DNS-323 The lm75 driver was recently converted to the new-style binding, so now it can be loaded from the DNS-323 support code. Signed-off-by: Martin Michlmayr Tested-by: Tobias Poschwatta Acked-by: Ben Dooks Signed-off-by: Lennert Buytenhek --- arch/arm/configs/orion5x_defconfig | 2 +- arch/arm/mach-orion5x/dns323-setup.c | 6 +----- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 1464ffe7171..113a4557276 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -884,7 +884,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set +CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 1a1d84b80a6..b38c65ccfb1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = { static struct i2c_board_info __initdata dns323_i2c_devices[] = { { I2C_BOARD_INFO("g760a", 0x3e), -#if 0 - /* this entry requires the new-style driver model lm75 driver, - * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */ }, { - I2C_BOARD_INFO("g751", 0x48), -#endif + I2C_BOARD_INFO("lm75", 0x48), }, { I2C_BOARD_INFO("m41t80", 0x68), }, From e45772b2c0a011203b797d2b5f19fe314eacca0e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Wed, 13 Aug 2008 10:46:11 +0300 Subject: [PATCH 028/638] [ARM] Orion: register UART1 on QNAP TS-209 and TS-409 Register UART1 on QNAP TS-209 and TS-409 because the PIC controller is connected to it. This fixes a regression from 2.6.26. Signed-off-by: Martin Michlmayr Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/ts209-setup.c | 1 + arch/arm/mach-orion5x/ts409-setup.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index bcd4b2a10d6..9d689051419 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -300,6 +300,7 @@ static void __init qnap_ts209_init(void) orion5x_i2c_init(); orion5x_sata_init(&qnap_ts209_sata_data); orion5x_uart0_init(); + orion5x_uart1_init(); orion5x_xor_init(); platform_device_register(&qnap_ts209_button_device); diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 4bd8ed1d75e..d85588ac7ef 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -289,6 +289,7 @@ static void __init qnap_ts409_init(void) orion5x_eth_init(&qnap_tsx09_eth_data); orion5x_i2c_init(); orion5x_uart0_init(); + orion5x_uart1_init(); platform_device_register(&qnap_ts409_button_device); From 8e05de88cf5a8ab225697ba12d5f19ec594169ef Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 Aug 2008 13:21:15 -0400 Subject: [PATCH 029/638] [ARM] orion5x: update defconfig to v2.6.27-rc4 Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 146 ++++++++++++++++++++++------- 1 file changed, 113 insertions(+), 33 deletions(-) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 113a4557276..4017d83c9d2 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Mon Jun 2 23:54:48 2008 +# Linux kernel version: 2.6.27-rc4 +# Fri Aug 22 12:38:51 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,6 +12,7 @@ CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -56,7 +58,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -83,11 +84,17 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y +# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set @@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_TLB_FEROCEON=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y @@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -641,11 +652,14 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -815,44 +829,65 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_GPIO is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_PLATFORM is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -865,6 +900,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -928,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set # # Multimedia devices @@ -961,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -995,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -1037,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1045,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1058,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1084,7 +1119,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1123,6 +1160,7 @@ CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1143,6 +1181,27 @@ CONFIG_RTC_DRV_S35390A=y # # on-CPU RTC drivers # +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_MV_XOR=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_DMATEST is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set # @@ -1222,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1232,13 +1292,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1324,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1338,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1352,7 +1415,18 @@ CONFIG_FRAME_POINTER=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1365,6 +1439,7 @@ CONFIG_DEBUG_LL=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # @@ -1410,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1451,6 +1530,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set From 18496e80f729be5f536d0315751b3bbb95ca913e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 7 Aug 2008 00:11:12 +0300 Subject: [PATCH 030/638] [PATCH] ocfs2/cluster/tcp.c: make some functions static Commit 0f475b2abed6cbccee1da20a0bef2895eb2a0edd (ocfs2/net: Silence build warnings) made sense as far as it fixed compile warnings, but it was not required that it made the functions global. Signed-off-by: Adrian Bunk Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/tcp.c | 44 +++++++++++++++++++++++++++------ fs/ocfs2/cluster/tcp_internal.h | 32 ------------------------ 2 files changed, 37 insertions(+), 39 deletions(-) diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index a27d61581bd..2bcf706d9dd 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -143,8 +143,8 @@ static void o2net_sc_postpone_idle(struct o2net_sock_container *sc); static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc); #ifdef CONFIG_DEBUG_FS -void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, - u32 msgkey, struct task_struct *task, u8 node) +static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) { INIT_LIST_HEAD(&nst->st_net_debug_item); nst->st_task = task; @@ -153,31 +153,61 @@ void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, nst->st_node = node; } -void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) { do_gettimeofday(&nst->st_sock_time); } -void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +static void o2net_set_nst_send_time(struct o2net_send_tracking *nst) { do_gettimeofday(&nst->st_send_time); } -void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +static void o2net_set_nst_status_time(struct o2net_send_tracking *nst) { do_gettimeofday(&nst->st_status_time); } -void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, +static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, struct o2net_sock_container *sc) { nst->st_sc = sc; } -void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) +static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) { nst->st_id = msg_id; } + +#else /* CONFIG_DEBUG_FS */ + +static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) +{ +} + +static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +{ +} + +static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +{ +} + +static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +{ +} + +static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, + struct o2net_sock_container *sc) +{ +} + +static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, + u32 msg_id) +{ +} + #endif /* CONFIG_DEBUG_FS */ static inline int o2net_reconnect_delay(void) diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 18307ff81b7..8d58cfe410b 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -224,42 +224,10 @@ struct o2net_send_tracking { struct timeval st_send_time; struct timeval st_status_time; }; - -void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, - u32 msgkey, struct task_struct *task, u8 node); -void o2net_set_nst_sock_time(struct o2net_send_tracking *nst); -void o2net_set_nst_send_time(struct o2net_send_tracking *nst); -void o2net_set_nst_status_time(struct o2net_send_tracking *nst); -void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, - struct o2net_sock_container *sc); -void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id); - #else struct o2net_send_tracking { u32 dummy; }; - -static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, - u32 msgkey, struct task_struct *task, u8 node) -{ -} -static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) -{ -} -static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst) -{ -} -static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst) -{ -} -static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, - struct o2net_sock_container *sc) -{ -} -static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, - u32 msg_id) -{ -} #endif /* CONFIG_DEBUG_FS */ #endif /* O2CLUSTER_TCP_INTERNAL_H */ From a57a874b04e27cb530a0e18c244387452e73ccce Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 6 Aug 2008 00:50:41 +0400 Subject: [PATCH 031/638] [PATCH] ocfs2/cluster/netdebug.c: fix warning ocfs2/cluster/netdebug.c: fix warning fs/ocfs2/cluster/netdebug.c:154: warning: format '%lu' expects type 'long unsigned int', but argument 17 has type 'suseconds_t' Signed-off-by: Alexander Beregalov Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/netdebug.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index d8bfa0eb41b..52276c02f71 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -138,20 +138,20 @@ static int nst_seq_show(struct seq_file *seq, void *v) " message id: %d\n" " message type: %u\n" " message key: 0x%08x\n" - " sock acquiry: %lu.%lu\n" - " send start: %lu.%lu\n" - " wait start: %lu.%lu\n", + " sock acquiry: %lu.%ld\n" + " send start: %lu.%ld\n" + " wait start: %lu.%ld\n", nst, (unsigned long)nst->st_task->pid, (unsigned long)nst->st_task->tgid, nst->st_task->comm, nst->st_node, nst->st_sc, nst->st_id, nst->st_msg_type, nst->st_msg_key, nst->st_sock_time.tv_sec, - (unsigned long)nst->st_sock_time.tv_usec, + (long)nst->st_sock_time.tv_usec, nst->st_send_time.tv_sec, - (unsigned long)nst->st_send_time.tv_usec, + (long)nst->st_send_time.tv_usec, nst->st_status_time.tv_sec, - nst->st_status_time.tv_usec); + (long)nst->st_status_time.tv_usec); } spin_unlock(&o2net_debug_lock); @@ -276,7 +276,7 @@ static void *sc_seq_next(struct seq_file *seq, void *v, loff_t *pos) return sc; /* unused, just needs to be null when done */ } -#define TV_SEC_USEC(TV) TV.tv_sec, (unsigned long)TV.tv_usec +#define TV_SEC_USEC(TV) TV.tv_sec, (long)TV.tv_usec static int sc_seq_show(struct seq_file *seq, void *v) { @@ -309,12 +309,12 @@ static int sc_seq_show(struct seq_file *seq, void *v) " remote node: %s\n" " page off: %zu\n" " handshake ok: %u\n" - " timer: %lu.%lu\n" - " data ready: %lu.%lu\n" - " advance start: %lu.%lu\n" - " advance stop: %lu.%lu\n" - " func start: %lu.%lu\n" - " func stop: %lu.%lu\n" + " timer: %lu.%ld\n" + " data ready: %lu.%ld\n" + " advance start: %lu.%ld\n" + " advance stop: %lu.%ld\n" + " func start: %lu.%ld\n" + " func stop: %lu.%ld\n" " func key: %u\n" " func type: %u\n", sc, From a1af7d15a18d1e375b0a6fee93789a0bbfe088b4 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 19 Aug 2008 17:20:28 -0700 Subject: [PATCH 032/638] ocfs2: Fix sleep-with-spinlock recovery regression This fixes a bug introduced with 539d8264093560b917ee3afe4c7f74e5da09d6a5: [PATCH 2/2] ocfs2: Fix race between mount and recovery ocfs2_mark_dead_nodes() was reading journal inodes while holding the spinlock protecting our in-memory recovery state. The fix is very simple - the disk state is protected by a cluster lock that's already held, so we just move the spinlock down past the read. Reviewed-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/journal.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 7a37240f7a3..c47bc2a809c 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1418,13 +1418,13 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb) { unsigned int node_num; int status, i; + u32 gen; struct buffer_head *bh = NULL; struct ocfs2_dinode *di; /* This is called with the super block cluster lock, so we * know that the slot map can't change underneath us. */ - spin_lock(&osb->osb_lock); for (i = 0; i < osb->max_slots; i++) { /* Read journal inode to get the recovery generation */ status = ocfs2_read_journal_inode(osb, i, &bh, NULL); @@ -1433,23 +1433,31 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb) goto bail; } di = (struct ocfs2_dinode *)bh->b_data; - osb->slot_recovery_generations[i] = - ocfs2_get_recovery_generation(di); + gen = ocfs2_get_recovery_generation(di); brelse(bh); bh = NULL; + spin_lock(&osb->osb_lock); + osb->slot_recovery_generations[i] = gen; + mlog(0, "Slot %u recovery generation is %u\n", i, osb->slot_recovery_generations[i]); - if (i == osb->slot_num) + if (i == osb->slot_num) { + spin_unlock(&osb->osb_lock); continue; + } status = ocfs2_slot_to_node_num_locked(osb, i, &node_num); - if (status == -ENOENT) + if (status == -ENOENT) { + spin_unlock(&osb->osb_lock); continue; + } - if (__ocfs2_recovery_map_test(osb, node_num)) + if (__ocfs2_recovery_map_test(osb, node_num)) { + spin_unlock(&osb->osb_lock); continue; + } spin_unlock(&osb->osb_lock); /* Ok, we have a slot occupied by another node which @@ -1465,10 +1473,7 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb) mlog_errno(status); goto bail; } - - spin_lock(&osb->osb_lock); } - spin_unlock(&osb->osb_lock); status = 0; bail: From 83cab5338fa8c74f979223698c8d4cc88f2ab68e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 21 Aug 2008 14:14:27 +0800 Subject: [PATCH 033/638] ocfs2: Jump to correct label in ocfs2_expand_inline_dir() When we fail to insert extent in ocfs2_expand_inline_dir(), we should go to out_commit, not out. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 8a187584808..8e9c4a47d81 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -1310,7 +1310,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, NULL); if (ret) { mlog_errno(ret); - goto out; + goto out_commit; } ret = ocfs2_journal_dirty(handle, di_bh); @@ -1336,7 +1336,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, len, 0, NULL); if (ret) { mlog_errno(ret); - goto out; + goto out_commit; } } From 9780eb6cfaf7d2d5ccc061eaf94e7aec6a17791e Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 5 Aug 2008 11:32:46 -0700 Subject: [PATCH 034/638] ocfs2: correctly set i_blocks after inline dir gets expanded We were setting i_blocks based on allocation before the extent insert, which is wrong as the value is a calculation based on ip_clusters which gets updated as a result of the insert. This patch moves the line in question to just after the call to ocfs2_insert_extent(). Without this fix, inline directories were temporarily having an i_blocks value of zero immediately after expansion to extents. Reported-and-tested-by: Tristan Ye Signed-off-by: Mark Fasheh --- fs/ocfs2/dir.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 8e9c4a47d81..9cce563fd62 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -1300,7 +1300,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, di->i_size = cpu_to_le64(sb->s_blocksize); di->i_ctime = di->i_mtime = cpu_to_le64(dir->i_ctime.tv_sec); di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(dir->i_ctime.tv_nsec); - dir->i_blocks = ocfs2_inode_sector_count(dir); /* * This should never fail as our extent list is empty and all @@ -1313,6 +1312,12 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh, goto out_commit; } + /* + * Set i_blocks after the extent insert for the most up to + * date ip_clusters value. + */ + dir->i_blocks = ocfs2_inode_sector_count(dir); + ret = ocfs2_journal_dirty(handle, di_bh); if (ret) { mlog_errno(ret); From de6bf18e9ce0df807dab08cff08751cac383429d Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Fri, 15 Aug 2008 12:37:23 -0700 Subject: [PATCH 035/638] [PATCH] configfs: Consolidate locking around configfs_detach_prep() in configfs_rmdir() It appears that configfs_rmdir() can protect configfs_detach_prep() retries with less calls to {spin,mutex}_{lock,unlock}, and a cleaner code. This patch does not change any behavior, except that it removes two useless lock/unlock pairs having nothing inside to protect and providing a useless barrier. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 7a8db78a91d..8e93341f3e8 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1311,16 +1311,18 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) * Ensure that no racing symlink() will make detach_prep() fail while * the new link is temporarily attached */ - mutex_lock(&configfs_symlink_mutex); - spin_lock(&configfs_dirent_lock); do { struct mutex *wait_mutex; + mutex_lock(&configfs_symlink_mutex); + spin_lock(&configfs_dirent_lock); ret = configfs_detach_prep(dentry, &wait_mutex); - if (ret) { + if (ret) configfs_detach_rollback(dentry); - spin_unlock(&configfs_dirent_lock); - mutex_unlock(&configfs_symlink_mutex); + spin_unlock(&configfs_dirent_lock); + mutex_unlock(&configfs_symlink_mutex); + + if (ret) { if (ret != -EAGAIN) { config_item_put(parent_item); return ret; @@ -1329,13 +1331,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) /* Wait until the racing operation terminates */ mutex_lock(wait_mutex); mutex_unlock(wait_mutex); - - mutex_lock(&configfs_symlink_mutex); - spin_lock(&configfs_dirent_lock); } } while (ret == -EAGAIN); - spin_unlock(&configfs_dirent_lock); - mutex_unlock(&configfs_symlink_mutex); /* Get a working ref for the duration of this function */ item = configfs_get_config_item(dentry); From 2338263e2cb3cd2f77cdc3fcab0312b6c7fc02c3 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Fri, 22 Aug 2008 16:18:22 -0400 Subject: [PATCH 036/638] Input: bcm5974 - add maintainer entry Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b..cdedf043e02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -413,6 +413,12 @@ L: linux-laptop@vger.kernel.org W: http://www.canb.auug.org.au/~sfr/ S: Supported +APPLE BCM5974 MULTITOUCH DRIVER +P: Henrik Rydberg +M: rydberg@euromail.se +L: linux-input@vger.kernel.org +S: Maintained + APPLE SMC DRIVER P: Nicolas Boichat M: nicolas@boichat.ch From 9b4e27b52853c5da77e61a4e36fbc40688b7a829 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 22 Aug 2008 20:23:37 +0200 Subject: [PATCH 037/638] x86: fix: do not run code in amd_bus.c on non-AMD CPUs Jan Beulich wrote: > Even worse - this would even try to access the MSR on non-AMD CPUs > (currently probably prevented just by the fact that only AMD ones use > family values of 0x10 or higher). This patch adds cpu vendor check to the postcore_initcalls. Reported-by: Jan Beulich Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/pci/amd_bus.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index dbf53236971..4a6f1a6a3aa 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -555,9 +555,11 @@ static int __init early_fill_mp_bus_info(void) return 0; } -postcore_initcall(early_fill_mp_bus_info); +#else /* !CONFIG_X86_64 */ -#endif +static int __init early_fill_mp_bus_info(void) { return 0; } + +#endif /* !CONFIG_X86_64 */ /* common 32/64 bit code */ @@ -583,4 +585,15 @@ static int __init enable_pci_io_ecs(void) return 0; } -postcore_initcall(enable_pci_io_ecs); +static int __init amd_postcore_init(void) +{ + if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) + return 0; + + early_fill_mp_bus_info(); + enable_pci_io_ecs(); + + return 0; +} + +postcore_initcall(amd_postcore_init); From 91ede005d72df60d6b3f252be177a4743a6aa46a Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 22 Aug 2008 20:23:38 +0200 Subject: [PATCH 038/638] x86: fix: make PCI ECS for AMD CPUs hotplug capable Until now, PCI ECS setup was performed at boot time only and for cpus that are enabled then. This patch fixes this and adds cpu hotplug. Tests sequence (check if ECS bit is set when bringing cpu online again): # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00400010 # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 1 > /sys/devices/system/cpu/cpu1/online # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' ) < /dev/cpu/1/msr 00000008 00404010 Reported-by: Yinghai Lu Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/pci/amd_bus.c | 35 +++++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 4a6f1a6a3aa..6a0fca78c36 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -1,6 +1,7 @@ #include #include #include +#include #include "pci.h" #ifdef CONFIG_X86_64 @@ -565,7 +566,7 @@ static int __init early_fill_mp_bus_info(void) { return 0; } #define ENABLE_CF8_EXT_CFG (1ULL << 46) -static void enable_pci_io_ecs_per_cpu(void *unused) +static void enable_pci_io_ecs(void *unused) { u64 reg; rdmsrl(MSR_AMD64_NB_CFG, reg); @@ -575,13 +576,39 @@ static void enable_pci_io_ecs_per_cpu(void *unused) } } -static int __init enable_pci_io_ecs(void) +static int __cpuinit amd_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) { + int cpu = (long)hcpu; + switch(action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0); + break; + default: + break; + } + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata amd_cpu_notifier = { + .notifier_call = amd_cpu_notify, +}; + +static int __init pci_io_ecs_init(void) +{ + int cpu; + /* assume all cpus from fam10h have IO ECS */ if (boot_cpu_data.x86 < 0x10) return 0; - on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1); + + register_cpu_notifier(&amd_cpu_notifier); + for_each_online_cpu(cpu) + amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE, + (void *)(long)cpu); pci_probe |= PCI_HAS_IO_ECS; + return 0; } @@ -591,7 +618,7 @@ static int __init amd_postcore_init(void) return 0; early_fill_mp_bus_info(); - enable_pci_io_ecs(); + pci_io_ecs_init(); return 0; } From 8735728ef8dc935c4fb351f913758fdbb62c308d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 22 Aug 2008 22:23:09 +0200 Subject: [PATCH 039/638] x86 MCE: Fix CPU hotplug problem with multiple multicore AMD CPUs During CPU hot-remove the sysfs directory created by threshold_create_bank(), defined in arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before its parent directory, created by mce_create_device(), defined in arch/x86/kernel/cpu/mcheck/mce_64.c . Moreover, when the CPU in question is hotplugged again, obviously the latter has to be created before the former. At present, the right ordering is not enforced, because all of these operations are carried out by CPU hotplug notifiers which are not appropriately ordered with respect to each other. This leads to serious problems on systems with two or more multicore AMD CPUs, among other things during suspend and hibernation. Fix the problem by placing threshold bank CPU hotplug callbacks in mce_cpu_callback(), so that they are invoked at the right places, if defined. Additionally, use kobject_del() to remove the sysfs directory associated with the kobject created by kobject_create_and_add() in threshold_create_bank(), to prevent the kernel from crashing during CPU hotplug operations on systems with two or more multicore AMD CPUs. This patch fixes bug #11337. Signed-off-by: Rafael J. Wysocki Acked-by: Andi Kleen Tested-by: Mark Langsdorf Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_64.c | 5 +++++ arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 18 +++++------------- include/asm-x86/mce.h | 1 + 3 files changed, 11 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 65a339678ec..726a5fcdf34 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -759,6 +759,7 @@ static struct sysdev_class mce_sysclass = { }; DEFINE_PER_CPU(struct sys_device, device_mce); +void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata; /* Why are there no generic functions for this? */ #define ACCESSOR(name, var, start) \ @@ -883,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb, case CPU_ONLINE: case CPU_ONLINE_FROZEN: mce_create_device(cpu); + if (threshold_cpu_callback) + threshold_cpu_callback(action, cpu); break; case CPU_DEAD: case CPU_DEAD_FROZEN: + if (threshold_cpu_callback) + threshold_cpu_callback(action, cpu); mce_remove_device(cpu); break; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index 88736cadbaa..5eb390a4b2e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) deallocate_threshold_block(cpu, bank); free_out: + kobject_del(b->kobj); kobject_put(b->kobj); kfree(b); per_cpu(threshold_banks, cpu)[bank] = NULL; @@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu) } /* get notified when a cpu comes on/off */ -static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action, + unsigned int cpu) { - /* cpu was unsigned int to begin with */ - unsigned int cpu = (unsigned long)hcpu; - if (cpu >= NR_CPUS) - goto out; + return; switch (action) { case CPU_ONLINE: @@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb, default: break; } - out: - return NOTIFY_OK; } -static struct notifier_block threshold_cpu_notifier __cpuinitdata = { - .notifier_call = threshold_cpu_callback, -}; - static __init int threshold_init_device(void) { unsigned lcpu = 0; @@ -684,7 +676,7 @@ static __init int threshold_init_device(void) if (err) return err; } - register_hotcpu_notifier(&threshold_cpu_notifier); + threshold_cpu_callback = amd_64_threshold_cpu_callback; return 0; } diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h index 94f1fd79e22..531eaa58745 100644 --- a/include/asm-x86/mce.h +++ b/include/asm-x86/mce.h @@ -92,6 +92,7 @@ extern int mce_disabled; void mce_log(struct mce *m); DECLARE_PER_CPU(struct sys_device, device_mce); +extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu); #ifdef CONFIG_X86_MCE_INTEL void mce_intel_feature_init(struct cpuinfo_x86 *c); From 38c052f8cff1bd323ccfa968136a9556652ee420 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 23 Aug 2008 17:59:07 +0200 Subject: [PATCH 040/638] rtc: fix deadlock if get_rtc_time() is _ever_ called with IRQs off, we deadlock badly in it, waiting for jiffies to increment. So make the code more robust by doing an explicit mdelay(20). This solves a very hard to reproduce/debug hard lockup reported by Mikael Pettersson. Reported-by: Mikael Pettersson Signed-off-by: Ingo Molnar --- include/asm-generic/rtc.h | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h index be4af0029ac..71ef3f0b968 100644 --- a/include/asm-generic/rtc.h +++ b/include/asm-generic/rtc.h @@ -15,6 +15,7 @@ #include #include #include +#include #define RTC_PIE 0x40 /* periodic interrupt enable */ #define RTC_AIE 0x20 /* alarm interrupt enable */ @@ -43,7 +44,6 @@ static inline unsigned char rtc_is_updating(void) static inline unsigned int get_rtc_time(struct rtc_time *time) { - unsigned long uip_watchdog = jiffies; unsigned char ctrl; unsigned long flags; @@ -53,19 +53,15 @@ static inline unsigned int get_rtc_time(struct rtc_time *time) /* * read RTC once any update in progress is done. The update - * can take just over 2ms. We wait 10 to 20ms. There is no need to + * can take just over 2ms. We wait 20ms. There is no need to * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. * If you need to know *exactly* when a second has started, enable * periodic update complete interrupts, (via ioctl) and then * immediately read /dev/rtc which will block until you get the IRQ. * Once the read clears, read the RTC time (again via ioctl). Easy. */ - - if (rtc_is_updating() != 0) - while (jiffies - uip_watchdog < 2*HZ/100) { - barrier(); - cpu_relax(); - } + if (rtc_is_updating()) + mdelay(20); /* * Only the values that we read from the RTC are set. We leave From 819ddcafb33136f2ba18018a22edcf857f640528 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 02:45:32 +0200 Subject: [PATCH 041/638] mv643xx_eth: fix NAPI 'rotting packet' issue When a receive interrupt occurs, mv643xx_eth would first process the receive descriptors and then ACK the receive interrupt, instead of the other way round. This would leave a small race window between processing the last receive descriptor and clearing the receive interrupt status in which a new packet could come in, which would then 'rot' in the receive ring until the next receive interrupt would come in. Fix this by ACKing (clearing) the receive interrupt condition before processing the receive descriptors. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 46819af3b06..af279f26c40 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -650,8 +650,6 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) if (rx < budget) { netif_rx_complete(mp->dev, napi); - wrl(mp, INT_CAUSE(mp->port_num), 0); - wrl(mp, INT_CAUSE_EXT(mp->port_num), 0); wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT); } @@ -1796,6 +1794,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) */ #ifdef MV643XX_ETH_NAPI if (int_cause & INT_RX) { + wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_RX)); wrl(mp, INT_MASK(mp->port_num), 0x00000000); rdl(mp, INT_MASK(mp->port_num)); From 92c70f27d2a78873c940e77c7f075cd8e2e60a2d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 01:59:05 +0200 Subject: [PATCH 042/638] mv643xx_eth: fix double add_timer() on the receive oom timer Commit 12e4ab79cd828563dc090d2117dc8626b344bc8f ("mv643xx_eth: be more agressive about RX refill") changed the condition for the receive out-of-memory timer to be scheduled from "the receive ring is empty" to "the receive ring is not full". This can lead to a situation where the receive out-of-memory timer is pending because a previous rxq_refill() didn't manage to refill the receive ring entirely as a result of being out of memory, and rxq_refill() is then called again as a side effect of a packet receive interrupt, and that rxq_refill() call then again does not succeed to refill the entire receive ring with fresh empty skbuffs because we are still out of memory, and then tries to call add_timer() on the already scheduled out-of-memory timer. This patch fixes this issue by changing the add_timer() call in rxq_refill() to a mod_timer() call. If the OOM timer was not already scheduled, this will behave as before, whereas if it was already scheduled, this patch will push back its firing time a bit, which is safe because we've (unsuccessfully) attempted to refill the receive ring just before we do this. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index af279f26c40..8a91d79383d 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -509,10 +509,8 @@ static void rxq_refill(struct rx_queue *rxq) skb_reserve(skb, 2); } - if (rxq->rx_desc_count != rxq->rx_ring_size) { - rxq->rx_oom.expires = jiffies + (HZ / 10); - add_timer(&rxq->rx_oom); - } + if (rxq->rx_desc_count != rxq->rx_ring_size) + mod_timer(&rxq->rx_oom, jiffies + (HZ / 10)); spin_unlock_irqrestore(&mp->lock, flags); } From 8e0b1bf6ac6c4c6dd985e586cd765aede4678bba Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 02:30:42 +0200 Subject: [PATCH 043/638] mv643xx_eth: fix inconsistent lock semantics Nicolas Pitre noted that mv643xx_eth_poll was incorrectly using non-IRQ-safe locks while checking whether to wake up the netdevice's transmit queue. Convert the locking to *_irq() variants, since we are running from softirq context where interrupts are enabled. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8a91d79383d..30e6d4b8d56 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -634,9 +634,9 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_reclaim(mp->txq + i, 0); if (netif_carrier_ok(mp->dev)) { - spin_lock(&mp->lock); + spin_lock_irq(&mp->lock); __txq_maybe_wake(mp->txq + mp->txq_primary); - spin_unlock(&mp->lock); + spin_unlock_irq(&mp->lock); } } #endif From 9e1f37724265725ad4c14fc2ef60a162dc13ac64 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 02:33:47 +0200 Subject: [PATCH 044/638] mv643xx_eth: fix NULL pointer dereference in rxq_process() When we are low on memory, the assumption that every descriptor in the receive ring will have an skbuff associated with it does not hold. rxq_process() was assuming that if the receive descriptor it is working on is not owned by the hardware, it can safely be processed and handed to the networking stack. But a descriptor in the receive ring not being owned by the hardware can also happen when we are low on memory and did not manage to refill the receive ring fully. This patch changes rxq_process()'s bailout condition from "the first receive descriptor to be processed is owned by the hardware" to "the first receive descriptor to be processed is owned by the hardware OR the number of valid receive descriptors in the ring is zero". Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 30e6d4b8d56..e33dfc0165f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -527,7 +527,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) int rx; rx = 0; - while (rx < budget) { + while (rx < budget && rxq->rx_desc_count) { struct rx_desc *rx_desc; unsigned int cmd_sts; struct sk_buff *skb; From abe787170bb3888c5e587e8e986711fe32ddf2f9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 03:00:20 +0200 Subject: [PATCH 045/638] mv643xx_eth: enforce multiple-of-8-bytes receive buffer size restriction The mv643xx_eth hardware ignores the lower three bits of the buffer size field in receive descriptors, causing the reception of full-sized packets to fail at some MTUs. Fix this by rounding the size of allocated receive buffers up to a multiple of eight bytes. While we are at it, add a bit of extra space to each receive buffer so that we can handle multiple vlan tags on ingress. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index e33dfc0165f..a02a5f4a029 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -474,11 +474,19 @@ static void rxq_refill(struct rx_queue *rxq) /* * Reserve 2+14 bytes for an ethernet header (the * hardware automatically prepends 2 bytes of dummy - * data to each received packet), 4 bytes for a VLAN - * header, and 4 bytes for the trailing FCS -- 24 - * bytes total. + * data to each received packet), 16 bytes for up to + * four VLAN tags, and 4 bytes for the trailing FCS + * -- 36 bytes total. */ - skb_size = mp->dev->mtu + 24; + skb_size = mp->dev->mtu + 36; + + /* + * Make sure that the skb size is a multiple of 8 + * bytes, as the lower three bits of the receive + * descriptor's buffer size field are ignored by + * the hardware. + */ + skb_size = (skb_size + 7) & ~7; skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1); if (skb == NULL) @@ -552,7 +560,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) spin_unlock_irqrestore(&mp->lock, flags); dma_unmap_single(NULL, rx_desc->buf_ptr + 2, - mp->dev->mtu + 24, DMA_FROM_DEVICE); + rx_desc->buf_size, DMA_FROM_DEVICE); rxq->rx_desc_count--; rx++; From c4560318cf8fed91e3146a3c1247e11542d91d91 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 24 Aug 2008 07:33:05 +0200 Subject: [PATCH 046/638] mv643xx_eth: bump version to 1.3 Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a02a5f4a029..0a18b9e96da 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -55,7 +55,7 @@ #include static char mv643xx_eth_driver_name[] = "mv643xx_eth"; -static char mv643xx_eth_driver_version[] = "1.2"; +static char mv643xx_eth_driver_version[] = "1.3"; #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX #define MV643XX_ETH_NAPI From 54f961a628b737f66710eca0b0d95346645dd33e Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Wed, 13 Aug 2008 09:46:31 +1000 Subject: [PATCH 047/638] radeon: fix some hard lockups on r3/4/500s This patch should fix hard lockup and convert them in softlockup (ie you can ssh the box but the gpu is busted and we are waiting in loop for it to come back to reason). Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300_cmdbuf.c | 117 ++++++++++++++++++++++----- drivers/gpu/drm/radeon/r300_reg.h | 5 +- drivers/gpu/drm/radeon/radeon_cp.c | 38 +++++---- drivers/gpu/drm/radeon/radeon_drv.h | 19 +++-- 4 files changed, 130 insertions(+), 49 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index 702df45320f..4b3bd6303da 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -136,6 +136,18 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, ADVANCE_RING(); } + /* flus cache and wait idle clean after cliprect change */ + BEGIN_RING(2); + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); + OUT_RING(R300_RB3D_DC_FLUSH); + ADVANCE_RING(); + BEGIN_RING(2); + OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); + OUT_RING(RADEON_WAIT_3D_IDLECLEAN); + ADVANCE_RING(); + /* set flush flag */ + dev_priv->track_flush |= RADEON_FLUSH_EMITED; + return 0; } @@ -166,13 +178,13 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x21DC, 1); ADD_RANGE(R300_VAP_UNKNOWN_221C, 1); ADD_RANGE(R300_VAP_CLIP_X_0, 4); - ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1); + ADD_RANGE(R300_VAP_PVS_STATE_FLUSH_REG, 1); ADD_RANGE(R300_VAP_UNKNOWN_2288, 1); ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2); ADD_RANGE(R300_VAP_PVS_CNTL_1, 3); ADD_RANGE(R300_GB_ENABLE, 1); ADD_RANGE(R300_GB_MSPOS0, 5); - ADD_RANGE(R300_TX_CNTL, 1); + ADD_RANGE(R300_TX_INVALTAGS, 1); ADD_RANGE(R300_TX_ENABLE, 1); ADD_RANGE(0x4200, 4); ADD_RANGE(0x4214, 1); @@ -388,15 +400,28 @@ static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv, if (sz * 16 > cmdbuf->bufsz) return -EINVAL; - BEGIN_RING(5 + sz * 4); - /* Wait for VAP to come to senses.. */ - /* there is no need to emit it multiple times, (only once before VAP is programmed, - but this optimization is for later */ - OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0); + /* VAP is very sensitive so we purge cache before we program it + * and we also flush its state before & after */ + BEGIN_RING(6); + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); + OUT_RING(R300_RB3D_DC_FLUSH); + OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); + OUT_RING(RADEON_WAIT_3D_IDLECLEAN); + OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0)); + OUT_RING(0); + ADVANCE_RING(); + /* set flush flag */ + dev_priv->track_flush |= RADEON_FLUSH_EMITED; + + BEGIN_RING(3 + sz * 4); OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr); OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1)); OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4); + ADVANCE_RING(); + BEGIN_RING(2); + OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0)); + OUT_RING(0); ADVANCE_RING(); cmdbuf->buf += sz * 16; @@ -424,6 +449,15 @@ static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv, OUT_RING_TABLE((int *)cmdbuf->buf, 8); ADVANCE_RING(); + BEGIN_RING(4); + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); + OUT_RING(R300_RB3D_DC_FLUSH); + OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); + OUT_RING(RADEON_WAIT_3D_IDLECLEAN); + ADVANCE_RING(); + /* set flush flag */ + dev_priv->track_flush |= RADEON_FLUSH_EMITED; + cmdbuf->buf += 8 * 4; cmdbuf->bufsz -= 8 * 4; @@ -613,11 +647,19 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, case RADEON_CNTL_BITBLT_MULTI: return r300_emit_bitblt_multi(dev_priv, cmdbuf); - case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ + case RADEON_CP_INDX_BUFFER: + /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ return r300_emit_indx_buffer(dev_priv, cmdbuf); - case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ - case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ - case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ + case RADEON_CP_3D_DRAW_IMMD_2: + /* triggers drawing using in-packet vertex data */ + case RADEON_CP_3D_DRAW_VBUF_2: + /* triggers drawing of vertex buffers setup elsewhere */ + case RADEON_CP_3D_DRAW_INDX_2: + /* triggers drawing using indices to vertex buffer */ + /* whenever we send vertex we clear flush & purge */ + dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED | + RADEON_PURGE_EMITED); + break; case RADEON_WAIT_FOR_IDLE: case RADEON_CP_NOP: /* these packets are safe */ @@ -713,17 +755,53 @@ static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv, */ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv) { + uint32_t cache_z, cache_3d, cache_2d; RING_LOCALS; + + cache_z = R300_ZC_FLUSH; + cache_2d = R300_RB2D_DC_FLUSH; + cache_3d = R300_RB3D_DC_FLUSH; + if (!(dev_priv->track_flush & RADEON_PURGE_EMITED)) { + /* we can purge, primitive where draw since last purge */ + cache_z |= R300_ZC_FREE; + cache_2d |= R300_RB2D_DC_FREE; + cache_3d |= R300_RB3D_DC_FREE; + } - BEGIN_RING(6); - OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); - OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A); + /* flush & purge zbuffer */ + BEGIN_RING(2); OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); - OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE| - R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); - OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0)); - OUT_RING(0x0); + OUT_RING(cache_z); ADVANCE_RING(); + /* flush & purge 3d */ + BEGIN_RING(2); + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); + OUT_RING(cache_3d); + ADVANCE_RING(); + /* flush & purge texture */ + BEGIN_RING(2); + OUT_RING(CP_PACKET0(R300_TX_INVALTAGS, 0)); + OUT_RING(0); + ADVANCE_RING(); + /* FIXME: is this one really needed ? */ + BEGIN_RING(2); + OUT_RING(CP_PACKET0(R300_RB3D_AARESOLVE_CTL, 0)); + OUT_RING(0); + ADVANCE_RING(); + BEGIN_RING(2); + OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); + OUT_RING(RADEON_WAIT_3D_IDLECLEAN); + ADVANCE_RING(); + /* flush & purge 2d through E2 as RB2D will trigger lockup */ + BEGIN_RING(4); + OUT_RING(CP_PACKET0(R300_DSTCACHE_CTLSTAT, 0)); + OUT_RING(cache_2d); + OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0)); + OUT_RING(RADEON_WAIT_2D_IDLECLEAN | + RADEON_WAIT_HOST_IDLECLEAN); + ADVANCE_RING(); + /* set flush & purge flags */ + dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED; } /** @@ -905,8 +983,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev, DRM_DEBUG("\n"); - /* See the comment above r300_emit_begin3d for why this call must be here, - * and what the cleanup gotos are for. */ + /* pacify */ r300_pacify(dev_priv); if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) { diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index a6802f26afc..ee6f811599a 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -317,7 +317,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and * avoids bugs caused by still running shaders reading bad data from memory. */ -#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */ +#define R300_VAP_PVS_STATE_FLUSH_REG 0x2284 /* Absolutely no clue what this register is about. */ #define R300_VAP_UNKNOWN_2288 0x2288 @@ -513,7 +513,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* gap */ /* Zero to flush caches. */ -#define R300_TX_CNTL 0x4100 +#define R300_TX_INVALTAGS 0x4100 #define R300_TX_FLUSH 0x0 /* The upper enable bits are guessed, based on fglrx reported limits. */ @@ -1362,6 +1362,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_RB3D_COLORPITCH2 0x4E40 /* GUESS */ #define R300_RB3D_COLORPITCH3 0x4E44 /* GUESS */ +#define R300_RB3D_AARESOLVE_CTL 0x4E88 /* gap */ /* Guess by Vladimir. diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index f0de81a5689..3331f88dcfb 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -40,6 +40,7 @@ #define RADEON_FIFO_DEBUG 0 static int radeon_do_cleanup_cp(struct drm_device * dev); +static void radeon_do_cp_start(drm_radeon_private_t * dev_priv); static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { @@ -198,23 +199,8 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) DRM_UDELAY(1); } } else { - /* 3D */ - tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT); - tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); - - /* 2D */ - tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT); - tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp); - - for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT) - & RADEON_RB3D_DC_BUSY)) { - return 0; - } - DRM_UDELAY(1); - } + /* don't flush or purge cache here or lockup */ + return 0; } #if RADEON_FIFO_DEBUG @@ -237,6 +223,9 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries) return 0; DRM_UDELAY(1); } + DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n", + RADEON_READ(RADEON_RBBM_STATUS), + RADEON_READ(R300_VAP_CNTL_STATUS)); #if RADEON_FIFO_DEBUG DRM_ERROR("failed!\n"); @@ -263,6 +252,9 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv) } DRM_UDELAY(1); } + DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n", + RADEON_READ(RADEON_RBBM_STATUS), + RADEON_READ(R300_VAP_CNTL_STATUS)); #if RADEON_FIFO_DEBUG DRM_ERROR("failed!\n"); @@ -443,14 +435,20 @@ static void radeon_do_cp_start(drm_radeon_private_t * dev_priv) dev_priv->cp_running = 1; - BEGIN_RING(6); - + BEGIN_RING(8); + /* isync can only be written through cp on r5xx write it here */ + OUT_RING(CP_PACKET0(RADEON_ISYNC_CNTL, 0)); + OUT_RING(RADEON_ISYNC_ANY2D_IDLE3D | + RADEON_ISYNC_ANY3D_IDLE2D | + RADEON_ISYNC_WAIT_IDLEGUI | + RADEON_ISYNC_CPSCRATCH_IDLEGUI); RADEON_PURGE_CACHE(); RADEON_PURGE_ZCACHE(); RADEON_WAIT_UNTIL_IDLE(); - ADVANCE_RING(); COMMIT_RING(); + + dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED; } /* Reset the Command Processor. This will not flush any pending diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 3f0eca957aa..09938169317 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -220,6 +220,9 @@ struct radeon_virt_surface { struct drm_file *file_priv; }; +#define RADEON_FLUSH_EMITED (1 < 0) +#define RADEON_PURGE_EMITED (1 < 1) + typedef struct drm_radeon_private { drm_radeon_ring_buffer_t ring; drm_radeon_sarea_t *sarea_priv; @@ -311,6 +314,7 @@ typedef struct drm_radeon_private { unsigned long fb_aper_offset; int num_gb_pipes; + int track_flush; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { @@ -693,7 +697,6 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define R300_ZB_ZCACHE_CTLSTAT 0x4f18 # define R300_ZC_FLUSH (1 << 0) # define R300_ZC_FREE (1 << 1) -# define R300_ZC_FLUSH_ALL 0x3 # define R300_ZC_BUSY (1 << 31) #define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c # define RADEON_RB3D_DC_FLUSH (3 << 0) @@ -701,6 +704,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_RB3D_DC_FLUSH_ALL 0xf # define RADEON_RB3D_DC_BUSY (1 << 31) #define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c +# define R300_RB3D_DC_FLUSH (2 << 0) +# define R300_RB3D_DC_FREE (2 << 2) # define R300_RB3D_DC_FINISH (1 << 4) #define RADEON_RB3D_ZSTENCILCNTL 0x1c2c # define RADEON_Z_TEST_MASK (7 << 4) @@ -1246,17 +1251,17 @@ do { \ OUT_RING(RADEON_RB3D_DC_FLUSH); \ } else { \ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB3D_DC_FLUSH); \ + OUT_RING(R300_RB3D_DC_FLUSH); \ } \ } while (0) #define RADEON_PURGE_CACHE() do { \ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + OUT_RING(RADEON_RB3D_DC_FLUSH | RADEON_RB3D_DC_FREE); \ } else { \ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + OUT_RING(R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE); \ } \ } while (0) @@ -1273,10 +1278,10 @@ do { \ #define RADEON_PURGE_ZCACHE() do { \ if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ - OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH | RADEON_RB3D_ZC_FREE); \ } else { \ - OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ - OUT_RING(R300_ZC_FLUSH_ALL); \ + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH | R300_ZC_FREE); \ } \ } while (0) From e2898c5fdd91f54c9c84fbf7d32edb8e4dfda574 Mon Sep 17 00:00:00 2001 From: Nicolai Haehnle Date: Wed, 13 Aug 2008 09:49:15 +1000 Subject: [PATCH 048/638] drm/radeon: r300_cmdbuf: Always emit INDX_BUFFER immediately after DRAW_INDEX DRAW_INDEX writes a vertex count to VAP_VF_CNTL. Docs say that behaviour is undefined (i.e. lockups happen) when this write is not followed by the right number of vertex indices. Thus we used to do the wrong thing when drawing across many cliprects was necessary, because we emitted a sequence DRAW_INDEX, DRAW_INDEX, INDX_BUFFER, INDX_BUFFER instead of DRAW_INDEX, INDX_BUFFER, DRAW_INDEX, INDX_BUFFER The latter is what we're doing now and which ought to be correct. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300_cmdbuf.c | 80 ++++++++++++++++++++++------ 1 file changed, 64 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index 4b3bd6303da..b1fdfc61f27 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -577,22 +577,23 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, return 0; } -static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv, - drm_radeon_kcmd_buffer_t *cmdbuf) +static __inline__ int r300_emit_draw_indx_2(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf) { - u32 *cmd = (u32 *) cmdbuf->buf; - int count, ret; + u32 *cmd; + int count; + int expected_count; RING_LOCALS; - count=(cmd[0]>>16) & 0x3fff; + cmd = (u32 *) cmdbuf->buf; + count = (cmd[0]>>16) & 0x3fff; + expected_count = cmd[1] >> 16; + if (!(cmd[1] & R300_VAP_VF_CNTL__INDEX_SIZE_32bit)) + expected_count = (expected_count+1)/2; - if ((cmd[1] & 0x8000ffff) != 0x80000810) { - DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); - return -EINVAL; - } - ret = !radeon_check_offset(dev_priv, cmd[2]); - if (ret) { - DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + if (count && count != expected_count) { + DRM_ERROR("3D_DRAW_INDX_2: packet size %i, expected %i\n", + count, expected_count); return -EINVAL; } @@ -604,6 +605,50 @@ static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv, cmdbuf->buf += (count+2)*4; cmdbuf->bufsz -= (count+2)*4; + if (!count) { + drm_r300_cmd_header_t header; + + if (cmdbuf->bufsz < 4*4 + sizeof(header)) { + DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER, but stream is too short.\n"); + return -EINVAL; + } + + header.u = *(unsigned int *)cmdbuf->buf; + + cmdbuf->buf += sizeof(header); + cmdbuf->bufsz -= sizeof(header); + cmd = (u32 *) cmdbuf->buf; + + if (header.header.cmd_type != R300_CMD_PACKET3 || + header.packet3.packet != R300_CMD_PACKET3_RAW || + cmd[0] != CP_PACKET3(RADEON_CP_INDX_BUFFER, 2)) { + DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER.\n"); + return -EINVAL; + } + + if ((cmd[1] & 0x8000ffff) != 0x80000810) { + DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); + return -EINVAL; + } + if (!radeon_check_offset(dev_priv, cmd[2])) { + DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + return -EINVAL; + } + if (cmd[3] != expected_count) { + DRM_ERROR("INDX_BUFFER: buffer size %i, expected %i\n", + cmd[3], expected_count); + return -EINVAL; + } + + BEGIN_RING(4); + OUT_RING(cmd[0]); + OUT_RING_TABLE((int *)(cmdbuf->buf + 4), 3); + ADVANCE_RING(); + + cmdbuf->buf += 4*4; + cmdbuf->bufsz -= 4*4; + } + return 0; } @@ -648,18 +693,21 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, return r300_emit_bitblt_multi(dev_priv, cmdbuf); case RADEON_CP_INDX_BUFFER: - /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ - return r300_emit_indx_buffer(dev_priv, cmdbuf); + DRM_ERROR("packet3 INDX_BUFFER without preceding 3D_DRAW_INDX_2 is illegal.\n"); + return -EINVAL; case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ + dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED | + RADEON_PURGE_EMITED); + break; case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ /* whenever we send vertex we clear flush & purge */ dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED); - break; + return r300_emit_draw_indx_2(dev_priv, cmdbuf); case RADEON_WAIT_FOR_IDLE: case RADEON_CP_NOP: /* these packets are safe */ @@ -757,7 +805,7 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv) { uint32_t cache_z, cache_3d, cache_2d; RING_LOCALS; - + cache_z = R300_ZC_FLUSH; cache_2d = R300_RB2D_DC_FLUSH; cache_3d = R300_RB3D_DC_FLUSH; From 649ffc06a62bf487b78440669bdfeb637f1d675b Mon Sep 17 00:00:00 2001 From: Nicolai Haehnle Date: Wed, 13 Aug 2008 09:50:12 +1000 Subject: [PATCH 049/638] r300: Fix cliprect emit This makes our handling of cliprects sane. drm_clip_rect always has exclusiv bottom-right corners, but the hardware expects inclusive bottom-right corner so we adjust this here. This complements Michel Daenzer's commit 57aea290e1e0a26d1e74df6cff777eb9f03 to Mesa. See also http://bugs.freedesktop.org/show_bug.cgi?id=16123 Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300_cmdbuf.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c index b1fdfc61f27..4b27d9abb7b 100644 --- a/drivers/gpu/drm/radeon/r300_cmdbuf.c +++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c @@ -77,6 +77,9 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, return -EFAULT; } + box.x2--; /* Hardware expects inclusive bottom-right corner */ + box.y2--; + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { box.x1 = (box.x1) & R300_CLIPRECT_MASK; @@ -95,8 +98,8 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv, R300_CLIPRECT_MASK; box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) & R300_CLIPRECT_MASK; - } + OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) | (box.y1 << R300_CLIPRECT_Y_SHIFT)); OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) | From e5b4f19417b75a2d7c1e36934f60a3e836c4337e Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Sun, 24 Aug 2008 17:00:00 +1000 Subject: [PATCH 050/638] drm: don't call the vblank tasklet with irqs disabled. If a specific tasklet shares data with irq context, it needs to take a private irq-blocking spinlock within the tasklet itself. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 20 ++++++++++++-------- drivers/gpu/drm/drm_lock.c | 12 +++++------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 089c015c01d..53f0e5af1cc 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -400,27 +400,31 @@ static void drm_locked_tasklet_func(unsigned long data) { struct drm_device *dev = (struct drm_device *)data; unsigned long irqflags; - + void (*tasklet_func)(struct drm_device *); + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + tasklet_func = dev->locked_tasklet_func; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - if (!dev->locked_tasklet_func || + if (!tasklet_func || !drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) { - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); return; } dev->lock.lock_time = jiffies; atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - dev->locked_tasklet_func(dev); + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + tasklet_func = dev->locked_tasklet_func; + dev->locked_tasklet_func = NULL; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); + + if (tasklet_func != NULL) + tasklet_func(dev); drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); - - dev->locked_tasklet_func = NULL; - - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); } /** diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index 0998723cde7..d78e0dc1824 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -150,6 +150,7 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_lock *lock = data; unsigned long irqflags; + void (*tasklet_func)(struct drm_device *); if (lock->context == DRM_KERNEL_CONTEXT) { DRM_ERROR("Process %d using kernel context %d\n", @@ -158,14 +159,11 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) } spin_lock_irqsave(&dev->tasklet_lock, irqflags); - - if (dev->locked_tasklet_func) { - dev->locked_tasklet_func(dev); - - dev->locked_tasklet_func = NULL; - } - + tasklet_func = dev->locked_tasklet_func; + dev->locked_tasklet_func = NULL; spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); + if (tasklet_func != NULL) + tasklet_func(dev); atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]); From 3e5fc80a404a24c858468030b63555cccfb3e79c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 24 Aug 2008 17:02:26 +1000 Subject: [PATCH 051/638] drm: don't set the signal blocker on the master process. There is a problem with debugging the X server and gdb crashes in the xkb startup code. This avoids the problem by allowing the master process to get signals. It should be safe as the signal blocker is mainly so that you can Ctrl-Z a 3D application without locking up the whole box. Ctrl-Z the X server isn't something many people do. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_lock.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index d78e0dc1824..a4caf95485d 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -105,14 +105,19 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) ret ? "interrupted" : "has lock"); if (ret) return ret; - sigemptyset(&dev->sigmask); - sigaddset(&dev->sigmask, SIGSTOP); - sigaddset(&dev->sigmask, SIGTSTP); - sigaddset(&dev->sigmask, SIGTTIN); - sigaddset(&dev->sigmask, SIGTTOU); - dev->sigdata.context = lock->context; - dev->sigdata.lock = dev->lock.hw_lock; - block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask); + /* don't set the block all signals on the master process for now + * really probably not the correct answer but lets us debug xkb + * xserver for now */ + if (!file_priv->master) { + sigemptyset(&dev->sigmask); + sigaddset(&dev->sigmask, SIGSTOP); + sigaddset(&dev->sigmask, SIGTSTP); + sigaddset(&dev->sigmask, SIGTTIN); + sigaddset(&dev->sigmask, SIGTTOU); + dev->sigdata.context = lock->context; + dev->sigdata.lock = dev->lock.hw_lock; + block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask); + } if (dev->driver->dma_ready && (lock->flags & _DRM_LOCK_READY)) dev->driver->dma_ready(dev); From 060700b571717c997a2ea5e2049b848fa248ee13 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 Aug 2008 11:52:06 -0700 Subject: [PATCH 052/638] x86: do not enable TSC notifier if we don't need it Impact: crash on non-TSC-equipped CPUs Don't enable the TSC notifier if we *either*: 1. don't have a CPU, or 2. have a CPU with constant TSC. In either of those cases, the notifier is either damaging (1) or useless(2). From: Linus Torvalds Signed-off-by: H. Peter Anvin --- arch/x86/kernel/tsc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 46af7167673..9bed5cae4bd 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -325,6 +325,10 @@ static struct notifier_block time_cpufreq_notifier_block = { static int __init cpufreq_tsc(void) { + if (!cpu_has_tsc) + return 0; + if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + return 0; cpufreq_register_notifier(&time_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); return 0; From a1068264522cb0a9b863d5357ade844e490bea41 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 22 Aug 2008 18:20:29 +0300 Subject: [PATCH 053/638] sh64: re-add the __strnlen_user() prototype Commit 42fd3b142d8867f5b58d6fb75592cd20fd654c1b (sh: Initial consolidation of the _32/_64 uaccess split.) mistakenly removed the sh64 __strnlen_user() prototype, resulting in the following compile error: <-- snip --> ... CC init/main.o In file included from include/linux/poll.h:13, from include/linux/rtc.h:113, from include/linux/efi.h:19, from init/main.c:43: arch/sh/include/asm/uaccess.h: In function 'strnlen_user': arch/sh/include/asm/uaccess.h:213: error: implicit declaration of function '__strnlen_user' ... make[2]: *** [init/main.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/include/asm/uaccess_64.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h index 81b3d515fcb..5580fd47100 100644 --- a/arch/sh/include/asm/uaccess_64.h +++ b/arch/sh/include/asm/uaccess_64.h @@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); +extern long __strnlen_user(const char *__s, long __n); + #endif /* __ASM_SH_UACCESS_64_H */ From e311be521fa9daedd8959d1a89f5e9bc5b54bb40 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 22 Aug 2008 18:20:36 +0300 Subject: [PATCH 054/638] sh: fix ptrace_64.c:user_disable_single_step() This patch fixes the following compile error caused by commit c459dbf294b4a3d70490a468a7ca3907fb2c2f57 (sh: ptrace single stepping cleanups.): <-- snip --> ... CC arch/sh/kernel/ptrace_64.o arch/sh/kernel/ptrace_64.c: In function 'user_disable_single_step': arch/sh/kernel/ptrace_64.c:134: error: 'regs' undeclared (first use in this function) arch/sh/kernel/ptrace_64.c:134: error: (Each undeclared identifier is reported only once arch/sh/kernel/ptrace_64.c:134: error: for each function it appears in.) ... make[2]: *** [arch/sh/kernel/ptrace_64.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_64.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 5922edd416d..9c6424892bd 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child) void user_disable_single_step(struct task_struct *child) { + struct pt_regs *regs = child->thread.uregs; + regs->sr &= ~SR_SSTEP; } From cc996099174dc05b35b7a29301026987990e7f8c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 2 Aug 2008 07:30:48 +0400 Subject: [PATCH 055/638] [PATCH] proc: inode number fixlet Ouch, if number taken from IDA is too big, the intent was to signal an error, not check for overflow and still do overflowing addition. One still needs 2^28 proc entries to notice this. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/proc/generic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 4fb81e9c94e..bca0f81eb68 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -330,6 +330,7 @@ retry: spin_lock(&proc_inum_lock); ida_remove(&proc_inum_ida, i); spin_unlock(&proc_inum_lock); + return 0; } return PROC_DYNAMIC_FIRST + i; } From 2d8a10cd1760e7ecc07a21e409485947c68a3291 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 11 Aug 2008 11:33:57 -0400 Subject: [PATCH 056/638] [PATCH] fix efs_lookup() it needs to use d_splice_alias(), not d_add() Signed-off-by: Al Viro --- fs/efs/namei.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/efs/namei.c b/fs/efs/namei.c index 3a404e7fad5..291abb11e20 100644 --- a/fs/efs/namei.c +++ b/fs/efs/namei.c @@ -74,8 +74,7 @@ struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, struct namei } unlock_kernel(); - d_add(dentry, inode); - return NULL; + return d_splice_alias(inode, dentry); } static struct inode *efs_nfs_get_inode(struct super_block *sb, u64 ino, From e45b590b976465c258f3e2a6cc84573fc19e16d3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 7 Aug 2008 23:49:07 +0200 Subject: [PATCH 057/638] [PATCH] change d_add_ci argument ordering As pointed out during review d_add_ci argument order should match d_add, so switch the dentry and inode arguments. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/dcache.c | 2 +- fs/xfs/linux-2.6/xfs_iops.c | 2 +- include/linux/dcache.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 101663d15e9..80e93956ace 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1236,7 +1236,7 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry) * If no entry exists with the exact case name, allocate new dentry with * the exact case, and return the spliced entry. */ -struct dentry *d_add_ci(struct inode *inode, struct dentry *dentry, +struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode, struct qstr *name) { int error; diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 91bcd979242..095d271f343 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -355,7 +355,7 @@ xfs_vn_ci_lookup( /* else case-insensitive match... */ dname.name = ci_name.name; dname.len = ci_name.len; - dentry = d_add_ci(VFS_I(ip), dentry, &dname); + dentry = d_add_ci(dentry, VFS_I(ip), &dname); kmem_free(ci_name.name); return dentry; } diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 07aa198f19e..efba1de629a 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -230,7 +230,7 @@ extern void d_delete(struct dentry *); extern struct dentry * d_alloc(struct dentry *, const struct qstr *); extern struct dentry * d_alloc_anon(struct inode *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); -extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *); +extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *); extern void shrink_dcache_sb(struct super_block *); extern void shrink_dcache_parent(struct dentry *); extern void shrink_dcache_for_umount(struct super_block *); From 2690421743b03c9be05d8e44c3b827986d1329a7 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 7 Aug 2008 23:50:21 +0200 Subject: [PATCH 058/638] [PATCH] ntfs: use d_add_ci d_add_ci was lifted 1:1 from ntfs. Change ntfs to use the common version. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/ntfs/namei.c | 89 ++----------------------------------------------- 1 file changed, 2 insertions(+), 87 deletions(-) diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c index e1781c8b165..9e8a95be7a1 100644 --- a/fs/ntfs/namei.c +++ b/fs/ntfs/namei.c @@ -174,7 +174,6 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent, // TODO: Consider moving this lot to a separate function! (AIA) handle_name: { - struct dentry *real_dent, *new_dent; MFT_RECORD *m; ntfs_attr_search_ctx *ctx; ntfs_inode *ni = NTFS_I(dent_inode); @@ -255,93 +254,9 @@ handle_name: } nls_name.hash = full_name_hash(nls_name.name, nls_name.len); - /* - * Note: No need for dent->d_lock lock as i_mutex is held on the - * parent inode. - */ - - /* Does a dentry matching the nls_name exist already? */ - real_dent = d_lookup(dent->d_parent, &nls_name); - /* If not, create it now. */ - if (!real_dent) { - real_dent = d_alloc(dent->d_parent, &nls_name); - kfree(nls_name.name); - if (!real_dent) { - err = -ENOMEM; - goto err_out; - } - new_dent = d_splice_alias(dent_inode, real_dent); - if (new_dent) - dput(real_dent); - else - new_dent = real_dent; - ntfs_debug("Done. (Created new dentry.)"); - return new_dent; - } + dent = d_add_ci(dent, dent_inode, &nls_name); kfree(nls_name.name); - /* Matching dentry exists, check if it is negative. */ - if (real_dent->d_inode) { - if (unlikely(real_dent->d_inode != dent_inode)) { - /* This can happen because bad inodes are unhashed. */ - BUG_ON(!is_bad_inode(dent_inode)); - BUG_ON(!is_bad_inode(real_dent->d_inode)); - } - /* - * Already have the inode and the dentry attached, decrement - * the reference count to balance the ntfs_iget() we did - * earlier on. We found the dentry using d_lookup() so it - * cannot be disconnected and thus we do not need to worry - * about any NFS/disconnectedness issues here. - */ - iput(dent_inode); - ntfs_debug("Done. (Already had inode and dentry.)"); - return real_dent; - } - /* - * Negative dentry: instantiate it unless the inode is a directory and - * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED), - * in which case d_move() that in place of the found dentry. - */ - if (!S_ISDIR(dent_inode->i_mode)) { - /* Not a directory; everything is easy. */ - d_instantiate(real_dent, dent_inode); - ntfs_debug("Done. (Already had negative file dentry.)"); - return real_dent; - } - spin_lock(&dcache_lock); - if (list_empty(&dent_inode->i_dentry)) { - /* - * Directory without a 'disconnected' dentry; we need to do - * d_instantiate() by hand because it takes dcache_lock which - * we already hold. - */ - list_add(&real_dent->d_alias, &dent_inode->i_dentry); - real_dent->d_inode = dent_inode; - spin_unlock(&dcache_lock); - security_d_instantiate(real_dent, dent_inode); - ntfs_debug("Done. (Already had negative directory dentry.)"); - return real_dent; - } - /* - * Directory with a 'disconnected' dentry; get a reference to the - * 'disconnected' dentry. - */ - new_dent = list_entry(dent_inode->i_dentry.next, struct dentry, - d_alias); - dget_locked(new_dent); - spin_unlock(&dcache_lock); - /* Do security vodoo. */ - security_d_instantiate(real_dent, dent_inode); - /* Move new_dent in place of real_dent. */ - d_move(new_dent, real_dent); - /* Balance the ntfs_iget() we did above. */ - iput(dent_inode); - /* Throw away real_dent. */ - dput(real_dent); - /* Use new_dent as the actual dentry. */ - ntfs_debug("Done. (Already had negative, disconnected directory " - "dentry.)"); - return new_dent; + return dent; eio_err_out: ntfs_error(vol->sb, "Illegal file name attribute. Run chkdsk."); From 645e68ed4d14272f0b47e2474f90577191bef781 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 11 Aug 2008 23:51:22 -0400 Subject: [PATCH 059/638] [PATCH] fix osf_getdirents() Return value of filldir callback is just "should we stop here"; it's not a usable channel for passing error values (i.e. ->readdir() will forget anything except "is it non-zero"). Signed-off-by: Al Viro --- arch/alpha/kernel/osf_sys.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 6e943135f0e..8509dad3120 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -121,24 +121,29 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset, if (reclen > buf->count) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->error = -EOVERFLOW; return -EOVERFLOW; + } if (buf->basep) { if (put_user(offset, buf->basep)) - return -EFAULT; + goto Efault; buf->basep = NULL; } dirent = buf->dirent; - put_user(d_ino, &dirent->d_ino); - put_user(namlen, &dirent->d_namlen); - put_user(reclen, &dirent->d_reclen); - if (copy_to_user(dirent->d_name, name, namlen) || + if (put_user(d_ino, &dirent->d_ino) || + put_user(namlen, &dirent->d_namlen) || + put_user(reclen, &dirent->d_reclen) || + copy_to_user(dirent->d_name, name, namlen) || put_user(0, dirent->d_name + namlen)) - return -EFAULT; + goto Efault; dirent = (void __user *)dirent + reclen; buf->dirent = dirent; buf->count -= reclen; return 0; +Efault: + buf->error = -EFAULT; + return -EFAULT; } asmlinkage int From da574983de9f9283ba35662c8723627096e160de Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 12 Aug 2008 00:04:22 -0400 Subject: [PATCH 060/638] [PATCH] fix hpux_getdents() Missing checks for -EFAULT, broken handling of overflow. Signed-off-by: Al Viro --- arch/parisc/hpux/fs.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index 1263f00dc35..69ff671498e 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -84,22 +84,28 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset, if (reclen > buf->count) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->error = -EOVERFLOW; return -EOVERFLOW; + } dirent = buf->previous; if (dirent) - put_user(offset, &dirent->d_off); + if (put_user(offset, &dirent->d_off)) + goto Efault; dirent = buf->current_dir; + if (put_user(d_ino, &dirent->d_ino) || + put_user(reclen, &dirent->d_reclen) || + put_user(namlen, &dirent->d_namlen) || + copy_to_user(dirent->d_name, name, namlen) || + put_user(0, dirent->d_name + namlen)) + goto Efault; buf->previous = dirent; - put_user(d_ino, &dirent->d_ino); - put_user(reclen, &dirent->d_reclen); - put_user(namlen, &dirent->d_namlen); - copy_to_user(dirent->d_name, name, namlen); - put_user(0, dirent->d_name + namlen); - dirent = (void __user *)dirent + reclen; - buf->current_dir = dirent; + buf->current_dir = (void __user *)dirent + reclen; buf->count -= reclen; return 0; +Efault: + buffer->error = -EFAULT; + return -EFAULT; } #undef NAME_OFFSET @@ -126,8 +132,10 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i error = buf.error; lastdirent = buf.previous; if (lastdirent) { - put_user(file->f_pos, &lastdirent->d_off); - error = count - buf.count; + if (put_user(file->f_pos, &lastdirent->d_off)) + error = -EFAULT; + else + error = count - buf.count; } out_putf: From 8f3f655da7288504c1013621090ecc940173ae1c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 12 Aug 2008 00:28:24 -0400 Subject: [PATCH 061/638] [PATCH] fix regular readdir() and friends Handling of -EOVERFLOW. Signed-off-by: Al Viro --- fs/compat.c | 8 ++++++-- fs/readdir.c | 8 ++++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/fs/compat.c b/fs/compat.c index c9d1472e65c..075d0509970 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -792,8 +792,10 @@ static int compat_fillonedir(void *__buf, const char *name, int namlen, if (buf->result) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->result = -EOVERFLOW; return -EOVERFLOW; + } buf->result++; dirent = buf->dirent; if (!access_ok(VERIFY_WRITE, dirent, @@ -862,8 +864,10 @@ static int compat_filldir(void *__buf, const char *name, int namlen, if (reclen > buf->count) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->error = -EOVERFLOW; return -EOVERFLOW; + } dirent = buf->previous; if (dirent) { if (__put_user(offset, &dirent->d_off)) diff --git a/fs/readdir.c b/fs/readdir.c index 4e026e5407f..93a7559bbfd 100644 --- a/fs/readdir.c +++ b/fs/readdir.c @@ -80,8 +80,10 @@ static int fillonedir(void * __buf, const char * name, int namlen, loff_t offset if (buf->result) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->result = -EOVERFLOW; return -EOVERFLOW; + } buf->result++; dirent = buf->dirent; if (!access_ok(VERIFY_WRITE, dirent, @@ -155,8 +157,10 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset, if (reclen > buf->count) return -EINVAL; d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) + if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) { + buf->error = -EOVERFLOW; return -EOVERFLOW; + } dirent = buf->previous; if (dirent) { if (__put_user(offset, &dirent->d_off)) From 59af1584bf33810639cb98d79856021253e2177c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Aug 2008 07:24:41 -0400 Subject: [PATCH 062/638] [PATCH] fix ->llseek() for a bunch of directories Signed-off-by: Al Viro --- fs/9p/vfs_dir.c | 1 + fs/adfs/dir.c | 1 + fs/affs/dir.c | 1 + fs/autofs4/root.c | 2 ++ fs/befs/linuxvfs.c | 1 + fs/xfs/linux-2.6/xfs_file.c | 1 + 6 files changed, 7 insertions(+) diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index 88e3787c6ea..e298fe19409 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -119,6 +119,7 @@ int v9fs_dir_release(struct inode *inode, struct file *filp) const struct file_operations v9fs_dir_operations = { .read = generic_read_dir, + .llseek = generic_file_llseek, .readdir = v9fs_dir_readdir, .open = v9fs_file_open, .release = v9fs_dir_release, diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c index fc1a8dc64d7..85a30e92980 100644 --- a/fs/adfs/dir.c +++ b/fs/adfs/dir.c @@ -197,6 +197,7 @@ out: const struct file_operations adfs_dir_operations = { .read = generic_read_dir, + .llseek = generic_file_llseek, .readdir = adfs_readdir, .fsync = file_fsync, }; diff --git a/fs/affs/dir.c b/fs/affs/dir.c index 6e3f282424b..7b36904dbea 100644 --- a/fs/affs/dir.c +++ b/fs/affs/dir.c @@ -19,6 +19,7 @@ static int affs_readdir(struct file *, void *, filldir_t); const struct file_operations affs_dir_operations = { .read = generic_read_dir, + .llseek = generic_file_llseek, .readdir = affs_readdir, .fsync = file_fsync, }; diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c index bcfb2dc0a61..2a41c2a7fc5 100644 --- a/fs/autofs4/root.c +++ b/fs/autofs4/root.c @@ -36,6 +36,7 @@ const struct file_operations autofs4_root_operations = { .release = dcache_dir_close, .read = generic_read_dir, .readdir = dcache_readdir, + .llseek = dcache_dir_lseek, .ioctl = autofs4_root_ioctl, }; @@ -44,6 +45,7 @@ const struct file_operations autofs4_dir_operations = { .release = dcache_dir_close, .read = generic_read_dir, .readdir = dcache_readdir, + .llseek = dcache_dir_lseek, }; const struct inode_operations autofs4_indirect_root_inode_operations = { diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 02c6e62b72f..740f53672a8 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -66,6 +66,7 @@ static struct kmem_cache *befs_inode_cachep; static const struct file_operations befs_dir_operations = { .read = generic_read_dir, .readdir = befs_readdir, + .llseek = generic_file_llseek, }; static const struct inode_operations befs_dir_inode_operations = { diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index 5f60363b934..5311c1acdd4 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -475,6 +475,7 @@ const struct file_operations xfs_invis_file_operations = { const struct file_operations xfs_dir_file_operations = { .read = generic_read_dir, .readdir = xfs_file_readdir, + .llseek = generic_file_llseek, .unlocked_ioctl = xfs_file_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = xfs_file_compat_ioctl, From 4cdfe84b51420c9ac95c7133da2d4c8a191094af Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 24 Aug 2008 07:45:33 -0400 Subject: [PATCH 063/638] [PATCH] deal with the first call of ->show() generating no output seq_read() has a subtle bug - we want the first loop there to go until at least one *non-empty* record had fit entirely into buffer. Signed-off-by: Al Viro --- fs/seq_file.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/seq_file.c b/fs/seq_file.c index 5d54205e486..bd20f7f5a93 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -108,9 +108,9 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) goto Done; } /* we need at least one record in buffer */ + pos = m->index; + p = m->op->start(m, &pos); while (1) { - pos = m->index; - p = m->op->start(m, &pos); err = PTR_ERR(p); if (!p || IS_ERR(p)) break; @@ -119,6 +119,11 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) break; if (unlikely(err)) m->count = 0; + if (unlikely(!m->count)) { + p = m->op->next(m, p, &pos); + m->index = pos; + continue; + } if (m->count < m->size) goto Fill; m->op->stop(m, p); @@ -128,6 +133,8 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) goto Enomem; m->count = 0; m->version = 0; + pos = m->index; + p = m->op->start(m, &pos); } m->op->stop(m, p); m->count = 0; From c5d44423d55e3abca7b1d544af9e4c97ec203999 Mon Sep 17 00:00:00 2001 From: Travis Place Date: Mon, 25 Aug 2008 08:11:50 +0200 Subject: [PATCH 064/638] ALSA: CA0106 on MSI K8N Diamond PLUS Motherboard Correct a previous patch for the ca0106 onboard the MSI K8N Diamond PLUS motherboard. Confirmed to have Line/Mic/Aux working for input, and sound output working as expected. Signed-off-by: Travis Place Signed-off-by: Takashi Iwai --- sound/pci/ca0106/ca0106_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 2f8b28add27..03a274becae 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -249,11 +249,12 @@ static struct snd_ca0106_details ca0106_chip_details[] = { .name = "MSI K8N Diamond MB [SB0438]", .gpio_type = 2, .i2c_adc = 1 } , - /* Another MSI K8N Diamond MB, which has apprently a different SSID */ + /* MSI K8N Diamond PLUS MB */ { .serial = 0x10091102, .name = "MSI K8N Diamond MB", .gpio_type = 2, - .i2c_adc = 1 } , + .i2c_adc = 1, + .spi_dac = 2 } /* Shuttle XPC SD31P which has an onboard Creative Labs * Sound Blaster Live! 24-bit EAX * high-definition 7.1 audio processor". From a2bd7274b47124d2fc4dfdb8c0591f545ba749dd Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 25 Aug 2008 00:56:08 -0700 Subject: [PATCH 065/638] x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3 David Witbrodt tracked down (and bisected) a hpet bootup hang on his system to the following problem: a BIOS bug made the hpet device visible as a generic PCI device. If e820 reserved entries happen to be registered first in the resource tree [which v2.6.26 started doing], then the PCI code will reallocate that device's BAR to some other address - breaking timer IRQs and hanging the system. ( Normally hpet devices are hidden by the BIOS from the OS's PCI discovery via chipset magic. Sometimes the hpet is not a PCI device at all. ) Solve this fundamental fragility by making non-PCI platform drivers insert resources into the resource tree even if it overlaps the e820 reserved entry, to keep the resource manager from updating the BAR. Also do these checks for the ioapic and mmconfig addresses, and emit a warning if this happens. Bisected-by: David Witbrodt Signed-off-by: Yinghai Lu Tested-by: David Witbrodt Signed-off-by: Ingo Molnar --- arch/x86/pci/i386.c | 78 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5807d1bc73f..d765da91384 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -31,8 +31,11 @@ #include #include #include +#include #include +#include +#include #include "pci.h" @@ -77,6 +80,77 @@ pcibios_align_resource(void *data, struct resource *res, } EXPORT_SYMBOL(pcibios_align_resource); +static int check_res_with_valid(struct pci_dev *dev, struct resource *res) +{ + unsigned long base; + unsigned long size; + int i; + + base = res->start; + size = (res->start == 0 && res->end == res->start) ? 0 : + (res->end - res->start + 1); + + if (!base || !size) + return 0; + +#ifdef CONFIG_HPET_TIMER + /* for hpet */ + if (base == hpet_address && (res->flags & IORESOURCE_MEM)) { + dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n", + base, base + size - 1); + return 1; + } +#endif + +#ifdef CONFIG_X86_IO_APIC + for (i = 0; i < nr_ioapics; i++) { + unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr; + + if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) { + dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n", + base, base + size - 1); + return 1; + } + } +#endif + +#ifdef CONFIG_PCI_MMCONFIG + for (i = 0; i < pci_mmcfg_config_num; i++) { + unsigned long addr; + + addr = pci_mmcfg_config[i].address; + if (base == addr && (res->flags & IORESOURCE_MEM)) { + dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n", + base, base + size - 1); + return 1; + } + } +#endif + + return 0; +} + +static int check_platform(struct pci_dev *dev, struct resource *res) +{ + struct resource *root = NULL; + + /* + * forcibly insert it into the + * resource tree + */ + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + else if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + + if (root && check_res_with_valid(dev, res)) { + insert_resource(root, res); + + return 1; + } + + return 0; +} /* * Handle resources of PCI devices. If the world were perfect, we could * just allocate all the resource regions and do nothing more. It isn't. @@ -128,6 +202,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { + if (check_platform(dev, r)) + continue; dev_err(&dev->dev, "BAR %d: can't " "allocate resource\n", idx); /* @@ -171,6 +247,8 @@ static void __init pcibios_allocate_resources(int pass) r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { + if (check_platform(dev, r)) + continue; dev_err(&dev->dev, "BAR %d: can't " "allocate resource\n", idx); /* We'll assign a new address later */ From ceac2651e9b7b77734d1c2b6f5d7d218d22f5427 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Aug 2008 17:39:11 +0800 Subject: [PATCH 066/638] Blackfin arch: Add MTD Partitions for MTD_DATAFLASH, increase max SPI SCLK Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/stamp.c | 27 ++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e93964fdb43..8482d22321f 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -584,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = { #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) + +static struct mtd_partition bfin_spi_dataflash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_dataflash_data = { + .name = "SPI Dataflash", + .parts = bfin_spi_dataflash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), +}; + /* DataFlash chip */ static struct bfin5xx_spi_chip data_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ @@ -609,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { || defined(CONFIG_MTD_DATAFLASH_MODULE) { /* DataFlash chip */ .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_dataflash_data, .controller_data = &data_flash_chip_info, .mode = SPI_MODE_3, }, From d70536ec3ad68474f5b093bcbcc8c5b6ba50831b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Aug 2008 17:37:35 +0800 Subject: [PATCH 067/638] Blackfin arch: dont actually need to muck with EMAC_SYSTAT for BF52x for demuxing Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 62f8883a5c2..6dac86995d1 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -983,7 +983,7 @@ int __init init_arch_irq(void) local_irq_disable(); -#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537) +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) /* Clear EMAC Interrupt Status bits so we can demux it later */ bfin_write_EMAC_SYSTAT(-1); #endif From 225f7e1eb56ad054c328ae1b11601ea4de7488ba Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Aug 2008 18:00:45 +0800 Subject: [PATCH 068/638] Blackfin arch: Fix bug - when to rmmod the L1_module, it stucks and then reboot the board. Fix this by correcting the wrong pointer Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/mm/blackfin_sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 9d2be43ac3d..1ed1b15a391 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -335,7 +335,7 @@ static int _sram_free(const void *addr, plast->size += pavail->size; kmem_cache_free(sram_piece_cache, pavail); } else { - pavail->next = plast; + pavail->next = plast->next; plast->next = pavail; plast = pavail; } From de82ff783bcb2b52353a7c99b4a8524ae739da73 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 22 Aug 2008 09:47:17 -0600 Subject: [PATCH 069/638] PNPACPI: ignore the producer/consumer bit for extended IRQ descriptors The Extended Interrupt descriptor has a producer/consumer bit, but it's not clear what that would mean, and existing BIOSes use the bit inconsistently. This patch makes Linux PNPACPI ignore the bit. The ACPI spec contains examples of PCI Interrupt Link devices marked as ResourceProducers, but many BIOSes mark them as ResourceConsumers. I also checked with a Windows contact, who said: Windows uses only "resource consumer" when dealing with interrupts. There's no useful way of looking at a resource producer of interrupts. ... NT-based Windows largely infers the producer/consumer stuff from the device type and ignores the bits in the namespace. This was necessary because Windows 98 ignored them and early namespaces contained random junk. The reason I want to change this is because if PNPACPI devices exclude ResourceProducer IRQ resources, we can't write PNP drivers for those devices. For example, on machines such as the the HP rx7620, rx7640, rx8620, rx8640, and Superdome, HPET interrupts are ResourceProducers. The HPET driver currently has to use acpi_bus_register_driver() and do its own _CRS parsing, even though it requires absolutely no ACPI-specific functionality. It would be better if the HPET driver were a PNP driver and took advantage of the _CRS parsing built into PNPACPI. This producer/consumer check was originally added here: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2b8de5f50e4a302b83ebcd5b0120621336d50bd6 to fix this bug: http://bugzilla.kernel.org/show_bug.cgi?id=6292 However, the bug was related only to memory and I/O port resources, where the distinction is sensible and important to Linux. Given that the distinction is muddled for IRQ resources, I think it was a mistake to add the check there. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen --- drivers/pnp/pnpacpi/rsparser.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index d7e9f2152df..95015cbfd33 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -405,8 +405,6 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: extended_irq = &res->data.extended_irq; - if (extended_irq->producer_consumer == ACPI_PRODUCER) - return AE_OK; if (extended_irq->interrupt_count == 0) pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED); From 3d9b7a5ce534f3963afcf8f4777267e5899fe007 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Mon, 25 Aug 2008 18:41:15 +0800 Subject: [PATCH 070/638] Blackfin arch: fix bug - MPU crashes under stress Bug Description: a customer reported under IRQ stress, running applications may wrongly trigger an ICPLB miss and be killed. after playing a bit more, here's a test case that may be triggering the same bug. Fixing: After modifying page protections, only modify the active CPLBs if the protection change was made for the active mm. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- include/asm-blackfin/mmu_context.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h index f55ec3c23a9..8529552a981 100644 --- a/include/asm-blackfin/mmu_context.h +++ b/include/asm-blackfin/mmu_context.h @@ -173,8 +173,10 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr, static inline void update_protections(struct mm_struct *mm) { - flush_switched_cplbs(); - set_mask_dcplbs(mm->context.page_rwx_mask); + if (mm->context.page_rwx_mask == current_rwx_mask) { + flush_switched_cplbs(); + set_mask_dcplbs(mm->context.page_rwx_mask); + } } #endif From 761e29f3bb19b05bea55285dfdf2d28e001a63b8 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 20 Aug 2008 16:32:40 +0300 Subject: [PATCH 071/638] UBIFS: always read hashed-key nodes under TNC mutex Leaf-nodes that have a hashed key are stored in the leaf-node-cache (LNC) which is protected by the TNC mutex. Consequently, when reading a leaf node with a hashed key (i.e. directory entries, xattr entries) the TNC mutex is always required. Signed-off-by: Adrian Hunter --- fs/ubifs/tnc.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index e909f4a9644..4fbc5921688 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -1498,7 +1498,6 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, { int found, n, err; struct ubifs_znode *znode; - struct ubifs_zbranch zbr; dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key)); mutex_lock(&c->tnc_mutex); @@ -1522,11 +1521,7 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, goto out_unlock; } - zbr = znode->zbranch[n]; - mutex_unlock(&c->tnc_mutex); - - err = tnc_read_node_nm(c, &zbr, node); - return err; + err = tnc_read_node_nm(c, &znode->zbranch[n], node); out_unlock: mutex_unlock(&c->tnc_mutex); From 601c0bc46753007be011b513ba4fc50ed8e30aef Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 22 Aug 2008 14:23:35 +0300 Subject: [PATCH 072/638] UBIFS: allow for racing between GC and TNC The TNC mutex is unlocked prematurely when reading leaf nodes with non-hashed keys. This is unsafe because the node may be moved by garbage collection and the eraseblock unmapped, although that has never actually happened during stress testing. This patch fixes the flaw by detecting the race and retrying with the TNC mutex locked. Signed-off-by: Adrian Hunter --- fs/ubifs/gc.c | 6 +++ fs/ubifs/misc.h | 17 ++++++++ fs/ubifs/tnc.c | 109 ++++++++++++++++++++++++++--------------------- fs/ubifs/ubifs.h | 6 ++- 4 files changed, 87 insertions(+), 51 deletions(-) diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c index d0f3dac2908..13f1019c859 100644 --- a/fs/ubifs/gc.c +++ b/fs/ubifs/gc.c @@ -344,6 +344,12 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) if (err) goto out; + /* Allow for races with TNC */ + c->gced_lnum = lnum; + smp_wmb(); + c->gc_seq += 1; + smp_wmb(); + if (c->gc_lnum == -1) { c->gc_lnum = lnum; err = LEB_RETAINED; diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h index 87dabf9fe74..87ced4c74a6 100644 --- a/fs/ubifs/misc.h +++ b/fs/ubifs/misc.h @@ -325,4 +325,21 @@ static inline struct timespec ubifs_current_time(struct inode *inode) current_fs_time(inode->i_sb) : CURRENT_TIME_SEC; } +/** + * ubifs_tnc_lookup - look up a file-system node. + * @c: UBIFS file-system description object + * @key: node key to lookup + * @node: the node is returned here + * + * This function look up and reads node with key @key. The caller has to make + * sure the @node buffer is large enough to fit the node. Returns zero in case + * of success, %-ENOENT if the node was not found, and a negative error code in + * case of failure. + */ +static inline int ubifs_tnc_lookup(struct ubifs_info *c, + const union ubifs_key *key, void *node) +{ + return ubifs_tnc_locate(c, key, node, NULL, NULL); +} + #endif /* __UBIFS_MISC_H__ */ diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 4fbc5921688..7da209ab937 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -506,7 +506,7 @@ static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key, if (keys_cmp(c, key, &node_key) != 0) ret = 0; } - if (ret == 0) + if (ret == 0 && c->replaying) dbg_mnt("dangling branch LEB %d:%d len %d, key %s", zbr->lnum, zbr->offs, zbr->len, DBGKEY(key)); return ret; @@ -1382,50 +1382,39 @@ static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key, } /** - * ubifs_tnc_lookup - look up a file-system node. + * maybe_leb_gced - determine if a LEB may have been garbage collected. * @c: UBIFS file-system description object - * @key: node key to lookup - * @node: the node is returned here + * @lnum: LEB number + * @gc_seq1: garbage collection sequence number * - * This function look up and reads node with key @key. The caller has to make - * sure the @node buffer is large enough to fit the node. Returns zero in case - * of success, %-ENOENT if the node was not found, and a negative error code in - * case of failure. + * This function determines if @lnum may have been garbage collected since + * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise + * %0 is returned. */ -int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key, - void *node) +static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1) { - int found, n, err; - struct ubifs_znode *znode; - struct ubifs_zbranch zbr, *zt; + int gc_seq2, gced_lnum; - mutex_lock(&c->tnc_mutex); - found = ubifs_lookup_level0(c, key, &znode, &n); - if (!found) { - err = -ENOENT; - goto out; - } else if (found < 0) { - err = found; - goto out; - } - zt = &znode->zbranch[n]; - if (is_hash_key(c, key)) { - /* - * In this case the leaf node cache gets used, so we pass the - * address of the zbranch and keep the mutex locked - */ - err = tnc_read_node_nm(c, zt, node); - goto out; - } - zbr = znode->zbranch[n]; - mutex_unlock(&c->tnc_mutex); - - err = ubifs_tnc_read_node(c, &zbr, node); - return err; - -out: - mutex_unlock(&c->tnc_mutex); - return err; + gced_lnum = c->gced_lnum; + smp_rmb(); + gc_seq2 = c->gc_seq; + /* Same seq means no GC */ + if (gc_seq1 == gc_seq2) + return 0; + /* Different by more than 1 means we don't know */ + if (gc_seq1 + 1 != gc_seq2) + return 1; + /* + * We have seen the sequence number has increased by 1. Now we need to + * be sure we read the right LEB number, so read it again. + */ + smp_rmb(); + if (gced_lnum != c->gced_lnum) + return 1; + /* Finally we can check lnum */ + if (gced_lnum == lnum) + return 1; + return 0; } /** @@ -1436,16 +1425,19 @@ out: * @lnum: LEB number is returned here * @offs: offset is returned here * - * This function is the same as 'ubifs_tnc_lookup()' but it returns the node - * location also. See 'ubifs_tnc_lookup()'. + * This function look up and reads node with key @key. The caller has to make + * sure the @node buffer is large enough to fit the node. Returns zero in case + * of success, %-ENOENT if the node was not found, and a negative error code in + * case of failure. The node location can be returned in @lnum and @offs. */ int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key, void *node, int *lnum, int *offs) { - int found, n, err; + int found, n, err, safely = 0, gc_seq1; struct ubifs_znode *znode; struct ubifs_zbranch zbr, *zt; +again: mutex_lock(&c->tnc_mutex); found = ubifs_lookup_level0(c, key, &znode, &n); if (!found) { @@ -1456,24 +1448,43 @@ int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key, goto out; } zt = &znode->zbranch[n]; + if (lnum) { + *lnum = zt->lnum; + *offs = zt->offs; + } if (is_hash_key(c, key)) { /* * In this case the leaf node cache gets used, so we pass the * address of the zbranch and keep the mutex locked */ - *lnum = zt->lnum; - *offs = zt->offs; err = tnc_read_node_nm(c, zt, node); goto out; } + if (safely) { + err = ubifs_tnc_read_node(c, zt, node); + goto out; + } + /* Drop the TNC mutex prematurely and race with garbage collection */ zbr = znode->zbranch[n]; + gc_seq1 = c->gc_seq; mutex_unlock(&c->tnc_mutex); - *lnum = zbr.lnum; - *offs = zbr.offs; + if (ubifs_get_wbuf(c, zbr.lnum)) { + /* We do not GC journal heads */ + err = ubifs_tnc_read_node(c, &zbr, node); + return err; + } - err = ubifs_tnc_read_node(c, &zbr, node); - return err; + err = fallible_read_node(c, key, &zbr, node); + if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) { + /* + * The node may have been GC'ed out from under us so try again + * while keeping the TNC mutex locked. + */ + safely = 1; + goto again; + } + return 0; out: mutex_unlock(&c->tnc_mutex); diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index d7f706f7a30..7828d69ca4f 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1028,6 +1028,8 @@ struct ubifs_mount_opts { * @sbuf: a buffer of LEB size used by GC and replay for scanning * @idx_gc: list of index LEBs that have been garbage collected * @idx_gc_cnt: number of elements on the idx_gc list + * @gc_seq: incremented for every non-index LEB garbage collected + * @gced_lnum: last non-index LEB that was garbage collected * * @infos_list: links all 'ubifs_info' objects * @umount_mutex: serializes shrinker and un-mount @@ -1257,6 +1259,8 @@ struct ubifs_info { void *sbuf; struct list_head idx_gc; int idx_gc_cnt; + volatile int gc_seq; + volatile int gced_lnum; struct list_head infos_list; struct mutex umount_mutex; @@ -1451,8 +1455,6 @@ int ubifs_save_dirty_idx_lnums(struct ubifs_info *c); /* tnc.c */ int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key, struct ubifs_znode **zn, int *n); -int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key, - void *node); int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, void *node, const struct qstr *nm); int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key, From 3051e41ab7daaa59d4564f20b25dcb8c03f35f2b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 25 Aug 2008 11:49:20 +0100 Subject: [PATCH 073/638] ALSA: ASoC: Fix double free and memory leak in many codec drivers Many SoC audio codec drivers have improper freeing of memory in error paths. * codec is allocated in the platform device probe function, but is not freed there in case of error. Instead it is freed in the i2c device probe function's error path. However the success or failure of both functions is not linked, so this could result in a double free (if the platform device is successfully probed, the i2c device probing fails and then the platform driver is unregistered.) * codec->private_data is allocated in many platform device probe functions but not freed in their error paths. This patch hopefully solves all these problems. Signed-off-by: Jean Delvare Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/ak4535.c | 11 +++++++---- sound/soc/codecs/tlv320aic3x.c | 11 +++++++---- sound/soc/codecs/uda1380.c | 9 +++++---- sound/soc/codecs/wm8510.c | 9 +++++---- sound/soc/codecs/wm8731.c | 11 +++++++---- sound/soc/codecs/wm8750.c | 10 ++++++---- sound/soc/codecs/wm8753.c | 11 +++++++---- sound/soc/codecs/wm8990.c | 11 +++++++---- 8 files changed, 51 insertions(+), 32 deletions(-) diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index b26003c4f3e..7da9f467b7b 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -562,10 +562,9 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -583,7 +582,6 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -660,6 +658,11 @@ static int ak4535_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index b1dce5f459d..5f9abb19943 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -1199,10 +1199,9 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -1221,7 +1220,6 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -1302,6 +1300,11 @@ static int aic3x_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index a52d6d9e007..807318fbdc8 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -729,10 +729,9 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -750,7 +749,6 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -817,6 +815,9 @@ static int uda1380_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) + kfree(codec); return ret; } diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c index 67325fd9544..3d998e6a997 100644 --- a/sound/soc/codecs/wm8510.c +++ b/sound/soc/codecs/wm8510.c @@ -693,10 +693,9 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -714,7 +713,6 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -782,6 +780,9 @@ static int wm8510_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) + kfree(codec); return ret; } diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 369d39c3f74..9402fcaf04f 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -596,10 +596,9 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -617,7 +616,6 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -693,6 +691,11 @@ static int wm8731_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index c6a8edf302a..dd1f55404b2 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -869,10 +869,9 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -890,7 +889,6 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -966,6 +964,10 @@ static int wm8750_probe(struct platform_device *pdev) /* Add other interfaces here */ #endif + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 8604809f0c3..35bf1c36987 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1661,10 +1661,9 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (!i2c) { - kfree(codec); + if (!i2c) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -1683,7 +1682,6 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -1760,6 +1758,11 @@ static int wm8753_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index e44153fa38d..dd995ef448b 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -1500,10 +1500,9 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind) client_template.addr = addr; i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); + if (i2c == NULL) return -ENOMEM; - } + i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -1521,7 +1520,6 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind) return ret; err: - kfree(codec); kfree(i2c); return ret; } @@ -1595,6 +1593,11 @@ static int wm8990_probe(struct platform_device *pdev) #else /* Add other interfaces here */ #endif + + if (ret != 0) { + kfree(codec->private_data); + kfree(codec); + } return ret; } From 52a8968ce95da8469ba0a9b3e4010fe31caf77a3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 25 Aug 2008 13:35:06 +0200 Subject: [PATCH 074/638] x86: fix cpufreq + sched_clock() regression I noticed that my sched_clock() was slow on a number of machine, so I started looking at cpufreq. The below seems to fix the problem for me. Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 9bed5cae4bd..8e786b0d665 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -314,7 +314,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, mark_tsc_unstable("cpufreq changes"); } - set_cyc2ns_scale(tsc_khz_ref, freq->cpu); + set_cyc2ns_scale(tsc_khz, freq->cpu); return 0; } From 532a6086e35fa3b5761e68af36d4e42a550eba15 Mon Sep 17 00:00:00 2001 From: Anthony Liguori Date: Mon, 18 Aug 2008 17:15:31 -0500 Subject: [PATCH 075/638] virtio_balloon: fix towards_target when deflating balloon Both v and vb->num_pages are u32 and unsigned int respectively. If v is less than vb->num_pages (and it is, when deflating the balloon), the result is a very large 32-bit number. Since we're returning a s64, instead of getting the same negative number we desire, we get a very large positive number. This handles the case where v < vb->num_pages and ensures we get a small, negative, s64 as the result. Rusty: please push this for 2.6.27-rc4. It's probably appropriate for the stable tree too as it will cause an unexpected OOM when ballooning. Signed-off-by: Anthony Liguori Signed-off-by: Rusty Russell (simplified) --- drivers/virtio/virtio_balloon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index bfef604160d..62eab43152d 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -158,7 +158,7 @@ static inline s64 towards_target(struct virtio_balloon *vb) vb->vdev->config->get(vb->vdev, offsetof(struct virtio_balloon_config, num_pages), &v, sizeof(v)); - return v - vb->num_pages; + return (s64)v - vb->num_pages; } static void update_balloon_size(struct virtio_balloon *vb) From 37a7c0f3e3e808b8d24f2187a25d2de39e46d822 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 Aug 2008 00:19:26 -0500 Subject: [PATCH 076/638] stop_machine: wean Xen off stop_machine_run This is the last use of (the deprecated) stop_machine_run in the tree. Signed-off-by: Rusty Russell Acked-by: Jeremy Fitzhardinge --- drivers/xen/manage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index a5bc91ae6ff..d0e87cbe157 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -102,7 +102,7 @@ static void do_suspend(void) /* XXX use normal device tree? */ xenbus_suspend(); - err = stop_machine_run(xen_suspend, &cancelled, 0); + err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0)); if (err) { printk(KERN_ERR "failed to start xen_suspend: %d\n", err); goto out; From bf2002967775cbb233876d51ff94e8daa7e77858 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 Aug 2008 00:19:27 -0500 Subject: [PATCH 077/638] stop_machine: Remove deprecated stop_machine_run Everyone should be using stop_machine() now. The staged API transition helped life in linux-next. Signed-off-by: Rusty Russell --- include/linux/stop_machine.h | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h index f1cb0ba6d71..faf1519b5ad 100644 --- a/include/linux/stop_machine.h +++ b/include/linux/stop_machine.h @@ -3,16 +3,13 @@ /* "Bogolock": stop the entire machine, disable interrupts. This is a very heavy lock, which is equivalent to grabbing every spinlock (and more). So the "read" side to such a lock is anything which - diables preeempt. */ + disables preeempt. */ #include #include #include #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP) -/* Deprecated, but useful for transition. */ -#define ALL_CPUS ~0U - /** * stop_machine: freeze the machine on all CPUs and run this function * @fn: the function to run @@ -50,18 +47,4 @@ static inline int stop_machine(int (*fn)(void *), void *data, return ret; } #endif /* CONFIG_SMP */ - -static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data, - unsigned int cpu) -{ - /* If they don't care which cpu fn runs on, just pick one. */ - if (cpu == NR_CPUS) - return stop_machine(fn, data, NULL); - else if (cpu == ~0U) - return stop_machine(fn, data, &cpu_possible_map); - else { - cpumask_t cpus = cpumask_of_cpu(cpu); - return stop_machine(fn, data, &cpus); - } -} #endif /* _LINUX_STOP_MACHINE */ From 1dc3e3bcbfe335843ec938bfdddb34d10f4dd278 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 Aug 2008 00:19:27 -0500 Subject: [PATCH 078/638] lguest: update commentry Signed-off-by: Rusty Russell --- Documentation/lguest/lguest.c | 8 ++++++++ drivers/lguest/lguest_device.c | 8 ++++++++ 2 files changed, 16 insertions(+) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 655414821ed..7228369d101 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -895,6 +895,9 @@ static void handle_console_output(int fd, struct virtqueue *vq, bool timeout) } } +/* This is called when we no longer want to hear about Guest changes to a + * virtqueue. This is more efficient in high-traffic cases, but it means we + * have to set a timer to check if any more changes have occurred. */ static void block_vq(struct virtqueue *vq) { struct itimerval itm; @@ -939,6 +942,11 @@ static void handle_net_output(int fd, struct virtqueue *vq, bool timeout) if (!timeout && num) block_vq(vq); + /* We never quite know how long should we wait before we check the + * queue again for more packets. We start at 500 microseconds, and if + * we get fewer packets than last time, we assume we made the timeout + * too small and increase it by 10 microseconds. Otherwise, we drop it + * by one microsecond every time. It seems to work well enough. */ if (timeout) { if (num < last_timeout_num) timeout_usec += 10; diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 37344aaee22..a661bbdae3d 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -98,6 +98,10 @@ static u32 lg_get_features(struct virtio_device *vdev) return features; } +/* The virtio core takes the features the Host offers, and copies the + * ones supported by the driver into the vdev->features array. Once + * that's all sorted out, this routine is called so we can tell the + * Host which features we understand and accept. */ static void lg_finalize_features(struct virtio_device *vdev) { unsigned int i, bits; @@ -108,6 +112,10 @@ static void lg_finalize_features(struct virtio_device *vdev) /* Give virtio_ring a chance to accept features. */ vring_transport_features(vdev); + /* The vdev->feature array is a Linux bitmask: this isn't the + * same as a the simple array of bits used by lguest devices + * for features. So we do this slow, manual conversion which is + * completely general. */ memset(out_features, 0, desc->feature_len); bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8; for (i = 0; i < bits; i++) { From 18b13e5457041429af3974afd52f647c3a5465dd Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Tue, 19 Aug 2008 20:00:08 -0300 Subject: [PATCH 079/638] KVM: Use .fixup instead of .text.fixup on __kvm_handle_fault_on_reboot vmlinux.lds expects the fixup code to be on a section named .fixup. The .text.fixup section is not mentioned on vmlinux.lds, and is included on the resulting vmlinux (just after .text) only because of ld heuristics on placing orphan sections. However, placing .text.fixup outside .text breaks the definition of _etext, making it exclude the .text.fixup contents. That makes .text.fixup be ignored by the kernel initialization code that needs to know about section locations, such as the code setting page protection bits. Signed-off-by: Eduardo Habkost Signed-off-by: Avi Kivity --- include/asm-x86/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index 0f3c5311461..c2e34c27590 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -722,7 +722,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void); #define __kvm_handle_fault_on_reboot(insn) \ "666: " insn "\n\t" \ - ".pushsection .text.fixup, \"ax\" \n" \ + ".pushsection .fixup, \"ax\" \n" \ "667: \n\t" \ KVM_EX_PUSH " $666b \n\t" \ "jmp kvm_handle_fault_on_reboot \n\t" \ From cd5998ebfbc9e6cb44408efa217c15d7eea13675 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 22 Aug 2008 19:19:38 +0300 Subject: [PATCH 080/638] KVM: MMU: Fix torn shadow pte The shadow code assigns a pte directly in one place, which is nonatomic on i386 can can cause random memory references. Fix by using an atomic setter. Signed-off-by: Avi Kivity --- arch/x86/kvm/paging_tmpl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index f72ac1fa35f..4a814bff21f 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -345,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr, shadow_addr = __pa(shadow_page->spt); shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK | PT_WRITABLE_MASK | PT_USER_MASK; - *shadow_ent = shadow_pte; + set_shadow_pte(shadow_ent, shadow_pte); } mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access, From 1327138e294ffda120a50c8f31d792addb196c79 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 6 Aug 2008 01:36:09 +0300 Subject: [PATCH 081/638] KVM: fix userspace ABI breakage The following part of commit 9ef621d3be56e1188300476a8102ff54f7b6793f (KVM: Support mixed endian machines) changed on the size of a struct that is exported to userspace: include/linux/kvm.h: @@ -318,14 +318,14 @@ struct kvm_trace_rec { __u32 vcpu_id; union { struct { - __u32 cycle_lo, cycle_hi; + __u64 cycle_u64; __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } cycle; struct { __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } nocycle; } u; -}; +} __attribute__((packed)); Packing a struct was the correct idea, but it packed the wrong struct. Signed-off-by: Adrian Bunk Signed-off-by: Avi Kivity --- include/linux/kvm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 69511f74f91..70a30651cd1 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -320,12 +320,12 @@ struct kvm_trace_rec { struct { __u64 cycle_u64; __u32 extra_u32[KVM_TRC_EXTRA_MAX]; - } cycle; + } __attribute__((packed)) cycle; struct { __u32 extra_u32[KVM_TRC_EXTRA_MAX]; } nocycle; } u; -} __attribute__((packed)); +}; #define KVMIO 0xAE From d6817cdbd143f87f9d7c59a4c3194091190eeb84 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 22 Aug 2008 14:30:10 -0700 Subject: [PATCH 082/638] ocfs2: Increment the reference count of an already-active stack. The ocfs2_stack_driver_request() function failed to increment the refcount of an already-active stack. It only did the increment on the first reference. Whoops. Signed-off-by: Joel Becker Tested-by: Marcos Matsunaga Signed-off-by: Mark Fasheh --- fs/ocfs2/stackglue.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 10e149ae5e3..07f348b8d72 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -97,13 +97,14 @@ static int ocfs2_stack_driver_request(const char *stack_name, goto out; } - /* Ok, the stack is pinned */ - p->sp_count++; active_stack = p; - rc = 0; out: + /* If we found it, pin it */ + if (!rc) + active_stack->sp_count++; + spin_unlock(&ocfs2_stack_lock); return rc; } From 2a61812af2e564cba2c8170cf96e1c823210f619 Mon Sep 17 00:00:00 2001 From: Austin Zhang Date: Mon, 25 Aug 2008 11:14:51 -0400 Subject: [PATCH 083/638] x86: add X86_FEATURE_XMM4_2 definitions Added Intel processor SSE4.2 feature flag. No in-tree user at the moment, but makes the tree-merging life easier for the crypto tree. Signed-off-by: Austin Zhang Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 2f5a792b0ac..762f6a6bc70 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -91,6 +91,7 @@ #define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */ #define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */ #define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */ +#define X86_FEATURE_XMM4_2 (4*32+20) /* Streaming SIMD Extensions-4.2 */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ #define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */ @@ -189,6 +190,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) +#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 From 354879bb977e06695993435745f06a0f6d39ce2b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 25 Aug 2008 17:15:34 +0200 Subject: [PATCH 084/638] sched_clock: fix cpu_clock() This patch fixes 3 issues: a) it removes the dependency on jiffies, because jiffies are incremented by a single CPU, and the tick is not synchronized between CPUs. Therefore relying on it to calculate a window to clip whacky TSC values doesn't work as it can drift around. So instead use [GTOD, GTOD+TICK_NSEC) as the window. b) __update_sched_clock() did (roughly speaking): delta = sched_clock() - scd->tick_raw; clock += delta; Which gives exponential growth, instead of linear. c) allows the sched_clock_cpu() value to warp the u64 without breaking. the results are more reliable sched_clock() deltas: before after sched_clock cpu_clock: 15750 51312 51488 cpu_clock: 59719 51052 50947 cpu_clock: 15879 51249 51061 cpu_clock: 1 50933 51198 cpu_clock: 1 50931 51039 cpu_clock: 1 51093 50981 cpu_clock: 1 51043 51040 cpu_clock: 1 50959 50938 cpu_clock: 1 50981 51011 cpu_clock: 1 51364 51212 cpu_clock: 1 51219 51273 cpu_clock: 1 51389 51048 cpu_clock: 1 51285 51611 cpu_clock: 1 50964 51137 cpu_clock: 1 50973 50968 cpu_clock: 1 50967 50972 cpu_clock: 1 58910 58485 cpu_clock: 1 51082 51025 cpu_clock: 1 50957 50958 cpu_clock: 1 50958 50957 cpu_clock: 1006128 51128 50971 cpu_clock: 1 51107 51155 cpu_clock: 1 51371 51081 cpu_clock: 1 51104 51365 cpu_clock: 1 51363 51309 cpu_clock: 1 51107 51160 cpu_clock: 1 51139 51100 cpu_clock: 1 51216 51136 cpu_clock: 1 51207 51215 cpu_clock: 1 51087 51263 cpu_clock: 1 51249 51177 cpu_clock: 1 51519 51412 cpu_clock: 1 51416 51255 cpu_clock: 1 51591 51594 cpu_clock: 1 50966 51374 cpu_clock: 1 50966 50966 cpu_clock: 1 51291 50948 cpu_clock: 1 50973 50867 cpu_clock: 1 50970 50970 cpu_clock: 998306 50970 50971 cpu_clock: 1 50971 50970 cpu_clock: 1 50970 50970 cpu_clock: 1 50971 50971 cpu_clock: 1 50970 50970 cpu_clock: 1 51351 50970 cpu_clock: 1 50970 51352 cpu_clock: 1 50971 50970 cpu_clock: 1 50970 50970 cpu_clock: 1 51321 50971 cpu_clock: 1 50974 51324 Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 84 ++++++++++++++++++-------------------------- 1 file changed, 34 insertions(+), 50 deletions(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 204991a0bfa..e8ab096ddfe 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -12,19 +12,17 @@ * * Create a semi stable clock from a mixture of other events, including: * - gtod - * - jiffies * - sched_clock() * - explicit idle events * * We use gtod as base and the unstable clock deltas. The deltas are filtered, - * making it monotonic and keeping it within an expected window. This window - * is set up using jiffies. + * making it monotonic and keeping it within an expected window. * * Furthermore, explicit sleep and wakeup hooks allow us to account for time * that is otherwise invisible (TSC gets stopped). * * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat - * consistent between cpus (never more than 1 jiffies difference). + * consistent between cpus (never more than 2 jiffies difference). */ #include #include @@ -54,7 +52,6 @@ struct sched_clock_data { */ raw_spinlock_t lock; - unsigned long tick_jiffies; u64 tick_raw; u64 tick_gtod; u64 clock; @@ -75,14 +72,12 @@ static inline struct sched_clock_data *cpu_sdc(int cpu) void sched_clock_init(void) { u64 ktime_now = ktime_to_ns(ktime_get()); - unsigned long now_jiffies = jiffies; int cpu; for_each_possible_cpu(cpu) { struct sched_clock_data *scd = cpu_sdc(cpu); scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; - scd->tick_jiffies = now_jiffies; scd->tick_raw = 0; scd->tick_gtod = ktime_now; scd->clock = ktime_now; @@ -91,47 +86,52 @@ void sched_clock_init(void) sched_clock_running = 1; } +/* + * min,max except they take wrapping into account + */ + +static inline u64 wrap_min(u64 x, u64 y) +{ + return (s64)(x - y) < 0 ? x : y; +} + +static inline u64 wrap_max(u64 x, u64 y) +{ + return (s64)(x - y) > 0 ? x : y; +} + /* * update the percpu scd from the raw @now value * * - filter out backward motion - * - use jiffies to generate a min,max window to clip the raw values + * - use the GTOD tick value to create a window to filter crazy TSC values */ static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now) { - unsigned long now_jiffies = jiffies; - long delta_jiffies = now_jiffies - scd->tick_jiffies; - u64 clock = scd->clock; - u64 min_clock, max_clock; s64 delta = now - scd->tick_raw; + u64 clock, min_clock, max_clock; WARN_ON_ONCE(!irqs_disabled()); - min_clock = scd->tick_gtod + delta_jiffies * TICK_NSEC; - if (unlikely(delta < 0)) { - clock++; - goto out; - } + if (unlikely(delta < 0)) + delta = 0; - max_clock = min_clock + TICK_NSEC; + /* + * scd->clock = clamp(scd->tick_gtod + delta, + * max(scd->tick_gtod, scd->clock), + * scd->tick_gtod + TICK_NSEC); + */ - if (unlikely(clock + delta > max_clock)) { - if (clock < max_clock) - clock = max_clock; - else - clock++; - } else { - clock += delta; - } + clock = scd->tick_gtod + delta; + min_clock = wrap_max(scd->tick_gtod, scd->clock); + max_clock = scd->tick_gtod + TICK_NSEC; - out: - if (unlikely(clock < min_clock)) - clock = min_clock; + clock = wrap_max(clock, min_clock); + clock = wrap_min(clock, max_clock); - scd->tick_jiffies = now_jiffies; scd->clock = clock; - return clock; + return scd->clock; } static void lock_double_clock(struct sched_clock_data *data1, @@ -171,7 +171,7 @@ u64 sched_clock_cpu(int cpu) * larger time as the latest time for both * runqueues. (this creates monotonic movement) */ - if (likely(remote_clock < this_clock)) { + if (likely((s64)(remote_clock - this_clock) < 0)) { clock = this_clock; scd->clock = clock; } else { @@ -207,14 +207,9 @@ void sched_clock_tick(void) now = sched_clock(); __raw_spin_lock(&scd->lock); - __update_sched_clock(scd, now); - /* - * update tick_gtod after __update_sched_clock() because that will - * already observe 1 new jiffy; adding a new tick_gtod to that would - * increase the clock 2 jiffies. - */ scd->tick_raw = now; scd->tick_gtod = now_gtod; + __update_sched_clock(scd, now); __raw_spin_unlock(&scd->lock); } @@ -232,18 +227,7 @@ EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event); */ void sched_clock_idle_wakeup_event(u64 delta_ns) { - struct sched_clock_data *scd = this_scd(); - - /* - * Override the previous timestamp and ignore all - * sched_clock() deltas that occured while we idled, - * and use the PM-provided delta_ns to advance the - * rq clock: - */ - __raw_spin_lock(&scd->lock); - scd->clock += delta_ns; - __raw_spin_unlock(&scd->lock); - + sched_clock_tick(); touch_softlockup_watchdog(); } EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event); From 5453c1a575df6232f84fad1502b2d559909265cc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 25 Aug 2008 18:13:26 +0200 Subject: [PATCH 085/638] [S390] Fix linker script. 6360b1fbb4a939efd34fc770c2ebd927c55506e0 ("move BUG_TABLE into RODATA") causes this build bug (binutils 2.18.50.0.8.20080709, gcc 4.3.1): AS .tmp_kallsyms1.o LD .tmp_vmlinux2 KSYM .tmp_kallsyms2.S s390x-4.3.1-nm: .tmp_vmlinux2: File truncated No valid symbol. make: *** [.tmp_kallsyms2.S] Error 1 So fix this. Cc: Jan Beulich Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 76c1e60c92f..607bd67a18c 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -55,7 +55,7 @@ SECTIONS __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } + } :data .data : { /* Data */ DATA_DATA From dbe13d9981e55c60a030d0509acc9a8968b9c5bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 25 Aug 2008 18:13:27 +0200 Subject: [PATCH 086/638] [S390] dcss: fix build bug. Fix this compile bug: CC drivers/s390/block/dcssblk.o drivers/s390/block/dcssblk.c: In function 'dcssblk_add_store': drivers/s390/block/dcssblk.c:387: error: implicit declaration of function 'dcssblk_get_segment_by_name' drivers/s390/block/dcssblk.c:389: error: label 'release_gd' used but not defined make[1]: *** [drivers/s390/block/dcssblk.o] Error 1 make: *** [drivers/s390/block/] Error 2 Cc: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dcssblk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index db85f1fb131..711b3004b3e 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -384,9 +384,10 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char * get minor, add to list */ down_write(&dcssblk_devices_sem); - if (dcssblk_get_segment_by_name(local_buf)) { + if (dcssblk_get_device_by_name(local_buf)) { + up_write(&dcssblk_devices_sem); rc = -EEXIST; - goto release_gd; + goto unload_seg; } rc = dcssblk_assign_free_minor(dev_info); if (rc) { From 42aca483ddee8888926d913b660e1dd38d748ba9 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 28 Jul 2008 20:36:50 -0500 Subject: [PATCH 087/638] [IA64] Fix ia64 build failure when CONFIG_SFC=m CONFIG_SFC=m uses topology_core_siblings() which, for ia64, expects cpu_core_map to be exported. It is not. This patch exports the needed symbol. Maintainers note: This really looks like the wrong thing to do ... it would be much better for the kernel to export an API to provide drivers like this with data they need (which in the case of this driver seems to be an estimate of the effective parallelism available on the platform). But x86 has exported this forever ... so go with the flow until such an API is defined. Signed-off-by: Ben Hutchings Signed-off-by: Matthew Wilcox Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/smpboot.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index b39853a292d..bcea81e432f 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -138,6 +138,7 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_possible_map); cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned; +EXPORT_SYMBOL(cpu_core_map); DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map); EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); From ffb4ba76a25ab6c9deeec33e4f58395586ca747c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 25 Aug 2008 11:10:26 -0700 Subject: [PATCH 088/638] [module] Don't let gcc inline load_module() 'load_module()' is a complex function that contains all the ELF section logic, and inlining it is utterly insane. But gcc will do it, simply because there is only one call-site. As a result, all the stack space that is allocated for all the work to load the module will still be active when we actually call the module init sequence, and the deep call chain makes stack overflows happen. And stack overflows are really hard to debug, because they not only corrupt random pages below the stack, but also corrupt the thread_info structure that is allocated under the stack. In this case, Alan Brunelle reported some crazy oopses at bootup, after loading the processor module that ends up doing complex ACPI stuff and has quite a deep callchain. This should fix it, and is the sane thing to do regardless. Cc: Alan D. Brunelle Cc: Arjan van de Ven Cc: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index 08864d257eb..9db11911e04 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1799,7 +1799,7 @@ static void *module_alloc_update_bounds(unsigned long size) /* Allocate and load the module: note that size of section 0 is always zero, and we rely on this for optional sections. */ -static struct module *load_module(void __user *umod, +static noinline struct module *load_module(void __user *umod, unsigned long len, const char __user *uargs) { From 8a549f8b581db95fec1e2d86ff857594fcfcd9db Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 22 Aug 2008 16:15:22 -0500 Subject: [PATCH 089/638] [IA64] Fix __{in,out}s{w,l} to handle unaligned data Some ia64 systems produce several repeats of kernel messages like this: kernel unaligned access to 0xe000000644220466, ip=0xa000000100516fa1 This was tracked to ide code using the __cmd[] field in "struct request" via the __outsw() function. __cmd[] is a char array, so is not guaranteed to be properly aligned when accessed as words. Tested-by: Nishanth Aravamudan Signed-off-by: James Bottomley Signed-off-by: Tony Luck --- arch/ia64/include/asm/io.h | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 260a85ac9d6..7f257507cd8 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -19,6 +19,8 @@ * Copyright (C) 1999 Don Dugger */ +#include + /* We don't use IO slowdowns on the ia64, but.. */ #define __SLOW_DOWN_IO do { } while (0) #define SLOW_DOWN_IO do { } while (0) @@ -241,7 +243,7 @@ __insw (unsigned long port, void *dst, unsigned long count) unsigned short *dp = dst; while (count--) - *dp++ = platform_inw(port); + put_unaligned(platform_inw(port), dp++); } static inline void @@ -250,7 +252,7 @@ __insl (unsigned long port, void *dst, unsigned long count) unsigned int *dp = dst; while (count--) - *dp++ = platform_inl(port); + put_unaligned(platform_inl(port), dp++); } static inline void @@ -268,7 +270,7 @@ __outsw (unsigned long port, const void *src, unsigned long count) const unsigned short *sp = src; while (count--) - platform_outw(*sp++, port); + platform_outw(get_unaligned(sp++), port); } static inline void @@ -277,7 +279,7 @@ __outsl (unsigned long port, const void *src, unsigned long count) const unsigned int *sp = src; while (count--) - platform_outl(*sp++, port); + platform_outl(get_unaligned(sp++), port); } /* From d25e26b61d59370eee8b7f2634641eb0fa76e952 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 25 Aug 2008 14:15:38 -0700 Subject: [PATCH 090/638] [x86] Clean up MAXSMP Kconfig, and limit NR_CPUS to 512 This fixes a regression that was indirectly caused by commit 1184dc2ffe2c8fb9afb766d870850f2c3165ef25 ("x86: modify Kconfig to allow up to 4096 cpus"). Allowing 4k CPU's is not practical at this time, because we still have a number of places that have several 'cpumask_t's on the stack, and a 4k-bit cpumask is 512 bytes of stack-space for each such variable. This literally caused functions like 'smp_call_function_mask' to have a 2.5kB stack frame, and several functions to have 2kB stackframes. With an 8kB stack total, smashing the stack was simply much too likely. At least bugzilla entry http://bugzilla.kernel.org/show_bug.cgi?id=11342 was due to this. The earlier commit to not inline load_module() into sys_init_module() fixed the particular symptoms of this that Alan Brunelle saw in that bugzilla entry, but the huge stack waste by cpumask_t's was the more direct cause. Some day we'll have allocation helpers that allocate large CPU masks dynamically, but in the meantime we simply cannot allow cpumasks this large. Cc: Alan D. Brunelle Cc: Mike Travis Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 68d91c8233f..ed92864d132 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -577,35 +577,29 @@ config SWIOTLB config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) + config MAXSMP bool "Configure Maximum number of SMP Processors and NUMA Nodes" - depends on X86_64 && SMP + depends on X86_64 && SMP && BROKEN default n help Configure maximum number of CPUS and NUMA Nodes for this architecture. If unsure, say N. -if MAXSMP config NR_CPUS - int - default "4096" -endif - -if !MAXSMP -config NR_CPUS - int "Maximum number of CPUs (2-4096)" - range 2 4096 + int "Maximum number of CPUs (2-512)" if !MAXSMP + range 2 512 depends on SMP + default "4096" if MAXSMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 4096 and the + kernel will support. The maximum supported value is 512 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. -endif config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -996,17 +990,10 @@ config NUMA_EMU into virtual nodes when booted with "numa=fake=N", where N is the number of nodes. This is only useful for debugging. -if MAXSMP - config NODES_SHIFT - int - default "9" -endif - -if !MAXSMP -config NODES_SHIFT - int "Maximum NUMA Nodes (as a power of 2)" + int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP range 1 9 if X86_64 + default "9" if MAXSMP default "6" if X86_64 default "4" if X86_NUMAQ default "3" @@ -1014,7 +1001,6 @@ config NODES_SHIFT help Specify the maximum number of NUMA Nodes available on the target system. Increases memory reserved to accomodate various tables. -endif config HAVE_ARCH_BOOTMEM_NODE def_bool y From 30c2235cbc477d4629983d440cdc4f496fec9246 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 25 Aug 2008 15:16:19 -0700 Subject: [PATCH 091/638] sctp: add verification checks to SCTP_AUTH_KEY option The structure used for SCTP_AUTH_KEY option contains a length that needs to be verfied to prevent buffer overflow conditions. Spoted by Eugene Teo . Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/auth.c | 4 ++++ net/sctp/socket.c | 5 +++++ 2 files changed, 9 insertions(+) diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 675a5c3e68a..1fcb4cf2f4c 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -80,6 +80,10 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp) { struct sctp_auth_bytes *key; + /* Verify that we are not going to overflow INT_MAX */ + if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes)) + return NULL; + /* Allocate the shared key */ key = kmalloc(sizeof(struct sctp_auth_bytes) + key_len, gfp); if (!key) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index bb5c9ef1304..afa952e726d 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3144,6 +3144,11 @@ static int sctp_setsockopt_auth_key(struct sock *sk, goto out; } + if (authkey->sca_keylength > optlen) { + ret = -EINVAL; + goto out; + } + asoc = sctp_id2assoc(sk, authkey->sca_assoc_id); if (!asoc && authkey->sca_assoc_id && sctp_style(sk, UDP)) { ret = -EINVAL; From 2f4520d35d89ca6c5cd129c38e3b11f0283b7d1b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Aug 2008 15:17:44 -0700 Subject: [PATCH 092/638] ipv4: sysctl fixes net.ipv4.neigh should be a part of skeleton to avoid ordering problems Signed-off-by: Al Viro Signed-off-by: David S. Miller --- net/ipv4/route.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index cca921ea855..e91bafeb32f 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3116,13 +3116,22 @@ static ctl_table ipv4_route_table[] = { { .ctl_name = 0 } }; -static __net_initdata struct ctl_path ipv4_route_path[] = { - { .procname = "net", .ctl_name = CTL_NET, }, - { .procname = "ipv4", .ctl_name = NET_IPV4, }, - { .procname = "route", .ctl_name = NET_IPV4_ROUTE, }, - { }, +static struct ctl_table empty[1]; + +static struct ctl_table ipv4_skeleton[] = +{ + { .procname = "route", .ctl_name = NET_IPV4_ROUTE, + .child = ipv4_route_table}, + { .procname = "neigh", .ctl_name = NET_IPV4_NEIGH, + .child = empty}, + { } }; +static __net_initdata struct ctl_path ipv4_path[] = { + { .procname = "net", .ctl_name = CTL_NET, }, + { .procname = "ipv4", .ctl_name = NET_IPV4, }, + { }, +}; static struct ctl_table ipv4_route_flush_table[] = { { @@ -3136,6 +3145,13 @@ static struct ctl_table ipv4_route_flush_table[] = { { .ctl_name = 0 }, }; +static __net_initdata struct ctl_path ipv4_route_path[] = { + { .procname = "net", .ctl_name = CTL_NET, }, + { .procname = "ipv4", .ctl_name = NET_IPV4, }, + { .procname = "route", .ctl_name = NET_IPV4_ROUTE, }, + { }, +}; + static __net_init int sysctl_route_net_init(struct net *net) { struct ctl_table *tbl; @@ -3287,7 +3303,7 @@ int __init ip_rt_init(void) */ void __init ip_static_sysctl_init(void) { - register_sysctl_paths(ipv4_route_path, ipv4_route_table); + register_sysctl_paths(ipv4_path, ipv4_skeleton); } #endif From ce3113ec57abcd41cc5a2fed02474aee3f63d12c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 25 Aug 2008 15:18:15 -0700 Subject: [PATCH 093/638] ipv6: sysctl fixes Braino: net.ipv6 in ipv6 skeleton has no business in rotable class Signed-off-by: Al Viro Signed-off-by: David S. Miller --- net/ipv6/sysctl_net_ipv6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c index e6dfaeac6be..587f8f60c48 100644 --- a/net/ipv6/sysctl_net_ipv6.c +++ b/net/ipv6/sysctl_net_ipv6.c @@ -156,7 +156,7 @@ static struct ctl_table_header *ip6_base; int ipv6_static_sysctl_register(void) { static struct ctl_table empty[1]; - ip6_base = register_net_sysctl_rotable(net_ipv6_ctl_path, empty); + ip6_base = register_sysctl_paths(net_ipv6_ctl_path, empty); if (ip6_base == NULL) return -ENOMEM; return 0; From 2772f9037355a031725987661621290380e58f52 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 25 Aug 2008 15:19:17 -0700 Subject: [PATCH 094/638] bnx2x: Rx work check The has Rx work check was wrong: when the FW was at the end of the page, the driver was already at the beginning of the next page. Since the check only validated that both driver and FW are pointing to the same place, it concluded that there is still work to be done. This caused some serious issues including long latency results on ping-pong test and lockups while unloading the driver in that condition. Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 2 +- drivers/net/bnx2x_main.c | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index b468f904c7f..a14dba1afcc 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -271,7 +271,7 @@ struct bnx2x_fastpath { (fp->tx_pkt_prod != fp->tx_pkt_cons)) #define BNX2X_HAS_RX_WORK(fp) \ - (fp->rx_comp_cons != le16_to_cpu(*fp->rx_cons_sb)) + (fp->rx_comp_cons != rx_cons_sb) #define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 971576b4368..272f5d112bb 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -9250,6 +9250,7 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) napi); struct bnx2x *bp = fp->bp; int work_done = 0; + u16 rx_cons_sb; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -9265,10 +9266,16 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) if (BNX2X_HAS_TX_WORK(fp)) bnx2x_tx_int(fp, budget); + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; if (BNX2X_HAS_RX_WORK(fp)) work_done = bnx2x_rx_int(fp, budget); rmb(); /* BNX2X_HAS_WORK() reads the status block */ + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; /* must not complete if we consumed full budget */ if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { From 7add905f93fa62d11d45fb1d2d05980661f2ccde Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 25 Aug 2008 15:20:48 -0700 Subject: [PATCH 095/638] bnx2x: Fan failure mechanism on additional design The A1021G board is also using the fan failure mechanism in the same way the A1022G board does Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 272f5d112bb..2e207b8eea9 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -2550,6 +2550,7 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) BNX2X_ERR("SPIO5 hw attention\n"); switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G: case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: /* Fan failure attention */ @@ -5337,6 +5338,7 @@ static int bnx2x_init_common(struct bnx2x *bp) } switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G: case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: /* Fan failure is indicated by SPIO 5 */ bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5, @@ -5531,6 +5533,7 @@ static int bnx2x_init_port(struct bnx2x *bp) /* Port DMAE comes here */ switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G: case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: /* add SPIO 5 to group 0 */ val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); From 76b190c592d952b37227f057a14f39e316754156 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 25 Aug 2008 15:22:46 -0700 Subject: [PATCH 096/638] bnx2x: Minimize lock time After iSCSI boot, the HW lock should only protect the flag so only the first function will reset the chip and not then entire chip reset process Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 2e207b8eea9..9972d0c0267 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6824,6 +6824,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); + if (val == 0x7) + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; /* save our func */ @@ -6901,7 +6905,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); } - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); } } From 46230476b7c66f7cbc013b771873c797f7ba770b Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 25 Aug 2008 15:23:30 -0700 Subject: [PATCH 097/638] bnx2x: HW lock timeout Increasing the lock timeout to 5 seconds instead of 1 second to minimize the chance of failures due to timeout Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 9972d0c0267..cb91802ea48 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1717,8 +1717,8 @@ static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource) return -EEXIST; } - /* Try for 1 second every 5ms */ - for (cnt = 0; cnt < 200; cnt++) { + /* Try for 5 second every 5ms */ + for (cnt = 0; cnt < 1000; cnt++) { /* Try to acquire the lock */ REG_WR(bp, hw_lock_control_reg + 4, resource_bit); lock_status = REG_RD(bp, hw_lock_control_reg); From 3cdf1db7db1649771d683b6ba323ff604ea3cc5e Mon Sep 17 00:00:00 2001 From: Yitchak Gertner Date: Mon, 25 Aug 2008 15:24:21 -0700 Subject: [PATCH 098/638] bnx2x: Initialization structure The TPA initialization is part of the FW internal memory initialization and so it is moved to the appropriate function Signed-off-by: Yitchak Gertner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index cb91802ea48..398daeb5be9 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -4606,6 +4606,17 @@ static void bnx2x_init_internal_common(struct bnx2x *bp) { int i; + if (bp->flags & TPA_ENABLE_FLAG) { + struct tstorm_eth_tpa_exist tpa = {0}; + + tpa.tpa_exist = 1; + + REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET, + ((u32 *)&tpa)[0]); + REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4, + ((u32 *)&tpa)[1]); + } + /* Zero this manually as its initialization is currently missing in the initTool */ for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++) @@ -5365,17 +5376,6 @@ static int bnx2x_init_common(struct bnx2x *bp) enable_blocks_attention(bp); - if (bp->flags & TPA_ENABLE_FLAG) { - struct tstorm_eth_tpa_exist tmp = {0}; - - tmp.tpa_exist = 1; - - REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET, - ((u32 *)&tmp)[0]); - REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4, - ((u32 *)&tmp)[1]); - } - if (!BP_NOMCP(bp)) { bnx2x_acquire_phy_lock(bp); bnx2x_common_init_phy(bp, bp->common.shmem_base); From d101463499b769d04e37d3bcb0e0c6876780ce08 Mon Sep 17 00:00:00 2001 From: Yitchak Gertner Date: Mon, 25 Aug 2008 15:25:45 -0700 Subject: [PATCH 099/638] bnx2x: NIC load failure cleanup Load failures were not handled correctly Signed-off-by: Yitchak Gertner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 398daeb5be9..1c81da45f69 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6341,7 +6341,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = bnx2x_init_hw(bp, load_code); if (rc) { BNX2X_ERR("HW init failed, aborting\n"); - goto load_error; + goto load_int_disable; } /* Setup NIC internals and enable interrupts */ @@ -6353,7 +6353,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!load_code) { BNX2X_ERR("MCP response failure, aborting\n"); rc = -EBUSY; - goto load_int_disable; + goto load_rings_free; } } @@ -6372,7 +6372,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = bnx2x_setup_leading(bp); if (rc) { BNX2X_ERR("Setup leading failed!\n"); - goto load_stop_netif; + goto load_netif_stop; } if (CHIP_IS_E1H(bp)) @@ -6385,7 +6385,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) for_each_nondefault_queue(bp, i) { rc = bnx2x_setup_multi(bp, i); if (rc) - goto load_stop_netif; + goto load_netif_stop; } if (CHIP_IS_E1(bp)) @@ -6430,20 +6430,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return 0; -load_stop_netif: +load_netif_stop: for_each_queue(bp, i) napi_disable(&bnx2x_fp(bp, i, napi)); - -load_int_disable: - bnx2x_int_disable_sync(bp); - - /* Release IRQs */ - bnx2x_free_irq(bp); - +load_rings_free: /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); +load_int_disable: + bnx2x_int_disable_sync(bp); + /* Release IRQs */ + bnx2x_free_irq(bp); load_error: bnx2x_free_mem(bp); From 65abd74dd52a79226070904f138f3f8cbcdcf10b Mon Sep 17 00:00:00 2001 From: Yitchak Gertner Date: Mon, 25 Aug 2008 15:26:24 -0700 Subject: [PATCH 100/638] bnx2x: NAPI and interrupts enable/disable Fixing the order of enabling and disabling NAPI and the interrupts Signed-off-by: Yitchak Gertner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 151 +++++++++++++++++++-------------------- 1 file changed, 74 insertions(+), 77 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 1c81da45f69..f0b04c98e45 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6058,6 +6058,44 @@ static int bnx2x_req_irq(struct bnx2x *bp) return rc; } +static void bnx2x_napi_enable(struct bnx2x *bp) +{ + int i; + + for_each_queue(bp, i) + napi_enable(&bnx2x_fp(bp, i, napi)); +} + +static void bnx2x_napi_disable(struct bnx2x *bp) +{ + int i; + + for_each_queue(bp, i) + napi_disable(&bnx2x_fp(bp, i, napi)); +} + +static void bnx2x_netif_start(struct bnx2x *bp) +{ + if (atomic_dec_and_test(&bp->intr_sem)) { + if (netif_running(bp->dev)) { + if (bp->state == BNX2X_STATE_OPEN) + netif_wake_queue(bp->dev); + bnx2x_napi_enable(bp); + bnx2x_int_enable(bp); + } + } +} + +static void bnx2x_netif_stop(struct bnx2x *bp) +{ + bnx2x_int_disable_sync(bp); + if (netif_running(bp->dev)) { + bnx2x_napi_disable(bp); + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } +} + /* * Init service functions */ @@ -6363,8 +6401,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) /* Enable Rx interrupt handling before sending the ramrod as it's completed on Rx FP queue */ - for_each_queue(bp, i) - napi_enable(&bnx2x_fp(bp, i, napi)); + bnx2x_napi_enable(bp); /* Enable interrupt handling */ atomic_set(&bp->intr_sem, 0); @@ -6431,8 +6468,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return 0; load_netif_stop: - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); + bnx2x_napi_disable(bp); load_rings_free: /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); @@ -6614,11 +6650,9 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) bp->rx_mode = BNX2X_RX_MODE_NONE; bnx2x_set_storm_rx_mode(bp); - if (netif_running(bp->dev)) { - netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ - } - + bnx2x_netif_stop(bp); + if (!netif_running(bp->dev)) + bnx2x_napi_disable(bp); del_timer_sync(&bp->timer); SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb, (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); @@ -6632,9 +6666,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) smp_rmb(); while (BNX2X_HAS_TX_WORK(fp)) { - if (!netif_running(bp->dev)) - bnx2x_tx_int(fp, 1000); - + bnx2x_tx_int(fp, 1000); if (!cnt) { BNX2X_ERR("timeout waiting for queue[%d]\n", i); @@ -6650,18 +6682,42 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) smp_rmb(); } } - /* Give HW time to discard old tx messages */ msleep(1); - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); - /* Disable interrupts after Tx and Rx are disabled on stack level */ - bnx2x_int_disable_sync(bp); - /* Release IRQs */ bnx2x_free_irq(bp); + if (CHIP_IS_E1(bp)) { + struct mac_configuration_cmd *config = + bnx2x_sp(bp, mcast_config); + + bnx2x_set_mac_addr_e1(bp, 0); + + for (i = 0; i < config->hdr.length_6b; i++) + CAM_INVALIDATE(config->config_table[i]); + + config->hdr.length_6b = i; + if (CHIP_REV_IS_SLOW(bp)) + config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port); + else + config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port); + config->hdr.client_id = BP_CL_ID(bp); + config->hdr.reserved1 = 0; + + bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0, + U64_HI(bnx2x_sp_mapping(bp, mcast_config)), + U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0); + + } else { /* E1H */ + REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); + + bnx2x_set_mac_addr_e1h(bp, 0); + + for (i = 0; i < MC_HASH_SIZE; i++) + REG_WR(bp, MC_HASH_OFFSET(bp, i), 0); + } + if (unload_mode == UNLOAD_NORMAL) reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; @@ -6690,37 +6746,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) } else reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; - if (CHIP_IS_E1(bp)) { - struct mac_configuration_cmd *config = - bnx2x_sp(bp, mcast_config); - - bnx2x_set_mac_addr_e1(bp, 0); - - for (i = 0; i < config->hdr.length_6b; i++) - CAM_INVALIDATE(config->config_table[i]); - - config->hdr.length_6b = i; - if (CHIP_REV_IS_SLOW(bp)) - config->hdr.offset = BNX2X_MAX_EMUL_MULTI*(1 + port); - else - config->hdr.offset = BNX2X_MAX_MULTICAST*(1 + port); - config->hdr.client_id = BP_CL_ID(bp); - config->hdr.reserved1 = 0; - - bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0, - U64_HI(bnx2x_sp_mapping(bp, mcast_config)), - U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0); - - } else { /* E1H */ - bnx2x_set_mac_addr_e1h(bp, 0); - - for (i = 0; i < MC_HASH_SIZE; i++) - REG_WR(bp, MC_HASH_OFFSET(bp, i), 0); - } - - if (CHIP_IS_E1H(bp)) - REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); - /* Close multi and leading connections Completions for ramrods are collected in a synchronous way */ for_each_nondefault_queue(bp, i) @@ -8621,34 +8646,6 @@ test_mem_exit: return rc; } -static void bnx2x_netif_start(struct bnx2x *bp) -{ - int i; - - if (atomic_dec_and_test(&bp->intr_sem)) { - if (netif_running(bp->dev)) { - bnx2x_int_enable(bp); - for_each_queue(bp, i) - napi_enable(&bnx2x_fp(bp, i, napi)); - if (bp->state == BNX2X_STATE_OPEN) - netif_wake_queue(bp->dev); - } - } -} - -static void bnx2x_netif_stop(struct bnx2x *bp) -{ - int i; - - if (netif_running(bp->dev)) { - netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); - } - bnx2x_int_disable_sync(bp); -} - static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up) { int cnt = 1000; From 231fd58a4d21aa633db734274a27a67395155e51 Mon Sep 17 00:00:00 2001 From: Yitchak Gertner Date: Mon, 25 Aug 2008 15:27:06 -0700 Subject: [PATCH 101/638] bnx2x: Multi Queue The multi queue support is still disabled by default for the bnx2x (needs some more testing and validation), but there are 2 obvious bug in it which are fixed in this patch Signed-off-by: Yitchak Gertner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index f0b04c98e45..95e058238af 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -6492,7 +6492,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) /* halt the connection */ bp->fp[index].state = BNX2X_FP_STATE_HALTING; - bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0); + bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, index, 0); /* Wait for completion */ rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index, @@ -9492,8 +9492,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) fp_index = (smp_processor_id() % bp->num_queues); fp = &bp->fp[fp_index]; - if (unlikely(bnx2x_tx_avail(bp->fp) < - (skb_shinfo(skb)->nr_frags + 3))) { + if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) { bp->eth_stats.driver_xoff++, netif_stop_queue(dev); BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); @@ -9556,7 +9555,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->vlan = cpu_to_le16(pkt_prod); if (xmit_type) { - /* turn on parsing and get a BD */ bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); pbd = (void *)&fp->tx_desc_ring[bd_prod]; From c2d42545774c4bba7232521d836d0793330e3a4e Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Mon, 25 Aug 2008 15:30:39 -0700 Subject: [PATCH 102/638] bnx2x: Version update Version update Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 95e058238af..82deea0a63f 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.17" -#define DRV_MODULE_RELDATE "2008/08/13" +#define DRV_MODULE_VERSION "1.45.20" +#define DRV_MODULE_RELDATE "2008/08/25" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ From f4156d1cd1dc260cca767a6c0636625f05446799 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Mon, 11 Aug 2008 17:25:43 +1000 Subject: [PATCH 103/638] powerpc/cell/oprofile: Avoid double vfree of profile buffer If an error occurs on opcontrol start, the event and per cpu buffers are released. If later opcontrol shutdown is called then the free function will be called again to free buffers that no longer exist. This results in a kernel oops. The following changes prevent the call to delete buffers that don't exist. Signed-off-by: Carl Love Signed-off-by: Arnd Bergmann Acked-by: Robert Richter Signed-off-by: Paul Mackerras --- drivers/oprofile/cpu_buffer.c | 4 +++- drivers/oprofile/event_buffer.c | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index 2450b3a393f..7ba78e6d210 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -38,8 +38,10 @@ void free_cpu_buffers(void) { int i; - for_each_online_cpu(i) + for_each_online_cpu(i) { vfree(per_cpu(cpu_buffer, i).buffer); + per_cpu(cpu_buffer, i).buffer = NULL; + } } int alloc_cpu_buffers(void) diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c index e7fbac52993..8d692a5c8e7 100644 --- a/drivers/oprofile/event_buffer.c +++ b/drivers/oprofile/event_buffer.c @@ -93,6 +93,8 @@ out: void free_event_buffer(void) { vfree(event_buffer); + + event_buffer = NULL; } From 98fded0728d6d65b78a7fe7d205e947ee81bb9b5 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 21 Aug 2008 06:18:43 +1000 Subject: [PATCH 104/638] powerpc/ps3: Update ps3_defconfig Update ps3_defconfig. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ps3_defconfig | 153 +++++++++++++++++++++++++---- 1 file changed, 133 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index f9a3d3b394c..b6eee7c93cd 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 16 13:59:24 2008 +# Linux kernel version: 2.6.27-rc3 +# Wed Aug 20 08:16:53 2008 # CONFIG_PPC64=y @@ -92,7 +92,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -118,11 +117,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -179,6 +183,7 @@ CONFIG_PS3_STORAGE=y CONFIG_PS3_DISK=y CONFIG_PS3_ROM=y CONFIG_PS3_FLASH=y +CONFIG_OPROFILE_PS3=y CONFIG_PS3_LPM=m CONFIG_PPC_CELL=y # CONFIG_PPC_CELL_NATIVE is not set @@ -218,7 +223,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -252,8 +257,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y # CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y +# CONFIG_MEMORY_HOTREMOVE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -276,19 +283,17 @@ CONFIG_ISA_DMA_API=y # CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_PCI_CHOICE=y # CONFIG_PCI is not set # CONFIG_PCI_DOMAINS is not set # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -399,9 +404,22 @@ CONFIG_BT_HCIUSB_SCO=y # # Wireless # -# CONFIG_CFG80211 is not set +CONFIG_CFG80211=m +CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set +# CONFIG_WIRELESS_EXT_SYSFS is not set +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m @@ -420,14 +438,79 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=0 +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PS3VRAM=y +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -443,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65535 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -494,7 +578,6 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -510,9 +593,9 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y +CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y # CONFIG_NETDEV_10000 is not set # @@ -523,8 +606,22 @@ CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +# CONFIG_RT2500USB is not set +CONFIG_RT73USB=m +# CONFIG_RT2X00_DEBUG is not set # # USB Network Adapters @@ -622,6 +719,7 @@ CONFIG_INPUT_JOYSTICK=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -647,6 +745,8 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -663,8 +763,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -796,6 +898,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -816,6 +919,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # USB Device Class drivers # @@ -843,6 +950,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -851,7 +959,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -864,7 +971,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -998,9 +1104,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1011,14 +1119,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1086,7 +1193,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1115,6 +1222,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1138,6 +1247,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set CONFIG_DEBUG_WRITECOUNT=y +CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -1146,6 +1256,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_FTRACE is not set @@ -1153,12 +1264,14 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set From 9cfeb74e93cf3549b7fa67ffe407192da625c777 Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Thu, 21 Aug 2008 06:18:51 +1000 Subject: [PATCH 105/638] powerpc/ps3: Rework htab code to remove ioremap Rework the PS3 MMU hash table code to remove the need to ioremap the hash table by using the HV calls lv1_insert_htab_entry() and lv1_read_htab_entries(). This fixes a runtime failure on the PS3 introduced by the powerpc ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83 ("powerpc ioremap_prot"). Signed-off-by: Masakazu Mokuno CC: Benjamin Herrenschmidt Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/htab.c | 263 ++++++++++------------------- arch/powerpc/platforms/ps3/setup.c | 1 - 2 files changed, 88 insertions(+), 176 deletions(-) diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index 1cf901fa903..6eb1d4d182c 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -29,138 +29,75 @@ #include "platform.h" -#if defined(DEBUG) -#define DBG udbg_printf -#else -#define DBG pr_debug -#endif +/** + * enum lpar_vas_id - id of LPAR virtual address space. + * @lpar_vas_id_current: Current selected virtual address space + * + * Identify the target LPAR address space. + */ -static struct hash_pte *htab; -static unsigned long htab_addr; -static unsigned char *bolttab; -static unsigned char *inusetab; +enum ps3_lpar_vas_id { + PS3_LPAR_VAS_ID_CURRENT = 0, +}; -static DEFINE_SPINLOCK(ps3_bolttab_lock); -#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \ - _debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__) -static void _debug_dump_hpte(unsigned long pa, unsigned long va, - unsigned long group, unsigned long bitmap, struct hash_pte lhpte, - int psize, unsigned long slot, const char* func, int line) -{ - DBG("%s:%d: pa = %lxh\n", func, line, pa); - DBG("%s:%d: lpar = %lxh\n", func, line, - ps3_mm_phys_to_lpar(pa)); - DBG("%s:%d: va = %lxh\n", func, line, va); - DBG("%s:%d: group = %lxh\n", func, line, group); - DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap); - DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v); - DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r); - DBG("%s:%d: psize = %xh\n", func, line, psize); - DBG("%s:%d: slot = %lxh\n", func, line, slot); -} +static DEFINE_SPINLOCK(ps3_htab_lock); static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va, unsigned long pa, unsigned long rflags, unsigned long vflags, int psize, int ssize) { - unsigned long slot; - struct hash_pte lhpte; - int secondary = 0; - unsigned long result; - unsigned long bitmap; + int result; + u64 hpte_v, hpte_r; + u64 inserted_index; + u64 evicted_v, evicted_r; + u64 hpte_v_array[4], hpte_rs; unsigned long flags; - unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci; + long ret = -1; - vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */ + /* + * lv1_insert_htab_entry() will search for victim + * entry in both primary and secondary pte group + */ + vflags &= ~HPTE_V_SECONDARY; - lhpte.v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) | - vflags | HPTE_V_VALID; - lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags; + hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID; + hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags; - p_pteg = hpte_group / HPTES_PER_GROUP; - s_pteg = ~p_pteg & htab_hash_mask; + spin_lock_irqsave(&ps3_htab_lock, flags); - spin_lock_irqsave(&ps3_bolttab_lock, flags); - - BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff); - - bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg]; - - if (bitmap == 0xffff) { - /* - * PTEG is full. Search for victim. - */ - bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]); - do { - ci = mftb() & 15; - cb = 0x8000UL >> ci; - } while ((cb & bitmap) == 0); - } else { - /* - * search free slot in hardware order - * [primary] 0, 2, 4, 6, 1, 3, 5, 7 - * [secondary] 0, 2, 4, 6, 1, 3, 5, 7 - */ - for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) { - cb = 0x8000UL >> ci; - if ((cb & bitmap) == 0) - goto found; - } - for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) { - cb = 0x8000UL >> ci; - if ((cb & bitmap) == 0) - goto found; - } - for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) { - cb = 0x8000UL >> ci; - if ((cb & bitmap) == 0) - goto found; - } - for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) { - cb = 0x8000UL >> ci; - if ((cb & bitmap) == 0) - goto found; - } - } - -found: - if (ci < HPTES_PER_GROUP) { - slot = p_pteg * HPTES_PER_GROUP + ci; - } else { - slot = s_pteg * HPTES_PER_GROUP + (ci & 7); - /* lhpte.dw0.dw0.h = 1; */ - vflags |= HPTE_V_SECONDARY; - lhpte.v |= HPTE_V_SECONDARY; - } - - result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r); + /* talk hvc to replace entries BOLTED == 0 */ + result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group, + hpte_v, hpte_r, + HPTE_V_BOLTED, 0, + &inserted_index, + &evicted_v, &evicted_r); if (result) { - debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot); + /* all entries bolted !*/ + pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n", + __func__, result, va, pa, hpte_group, hpte_v, hpte_r); BUG(); } /* - * If used slot is not in primary HPTE group, - * the slot should be in secondary HPTE group. + * see if the entry is inserted into secondary pteg */ + result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, + inserted_index & ~0x3UL, + &hpte_v_array[0], &hpte_v_array[1], + &hpte_v_array[2], &hpte_v_array[3], + &hpte_rs); + BUG_ON(result); - if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) { - secondary = 1; - b_index = s_pteg; - } else { - secondary = 0; - b_index = p_pteg; - } + if (hpte_v_array[inserted_index % 4] & HPTE_V_SECONDARY) + ret = (inserted_index & 7) | (1 << 3); + else + ret = inserted_index & 7; - b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7; - bolttab[b_index] |= b_mask >> (slot & 7); - b_mask = 1 << 7; - inusetab[b_index] |= b_mask >> (slot & 7); - spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + spin_unlock_irqrestore(&ps3_htab_lock, flags); - return (slot & 7) | (secondary << 3); + return ret; } static long ps3_hpte_remove(unsigned long hpte_group) @@ -172,39 +109,48 @@ static long ps3_hpte_remove(unsigned long hpte_group) static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp, unsigned long va, int psize, int ssize, int local) { + int result; + u64 hpte_v, want_v, hpte_rs; + u64 hpte_v_array[4]; unsigned long flags; - unsigned long result; - unsigned long pteg, bit; - unsigned long hpte_v, want_v; + long ret; - want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M); + want_v = hpte_encode_v(va, psize, ssize); - spin_lock_irqsave(&ps3_bolttab_lock, flags); + spin_lock_irqsave(&ps3_htab_lock, flags); - hpte_v = htab[slot].v; - if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) { - spin_unlock_irqrestore(&ps3_bolttab_lock, flags); - - /* ps3_hpte_insert() will be used to update PTE */ - return -1; - } - - result = lv1_write_htab_entry(0, slot, 0, 0); + result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, slot & ~0x3UL, + &hpte_v_array[0], &hpte_v_array[1], + &hpte_v_array[2], &hpte_v_array[3], + &hpte_rs); if (result) { - DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n", - __func__, va, slot, psize, result, result); + pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n", + __func__, result, va, slot, psize); BUG(); } - pteg = slot / HPTES_PER_GROUP; - bit = slot % HPTES_PER_GROUP; - inusetab[pteg] &= ~(0x80 >> bit); + hpte_v = hpte_v_array[slot % 4]; - spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + /* + * As lv1_read_htab_entries() does not give us the RPN, we can + * not synthesize the new hpte_r value here, and therefore can + * not update the hpte with lv1_insert_htab_entry(), so we + * insted invalidate it and ask the caller to update it via + * ps3_hpte_insert() by returning a -1 value. + */ + if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) { + /* not found */ + ret = -1; + } else { + /* entry found, just invalidate it */ + result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, + slot, 0, 0); + ret = -1; + } - /* ps3_hpte_insert() will be used to update PTE */ - return -1; + spin_unlock_irqrestore(&ps3_htab_lock, flags); + return ret; } static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, @@ -217,45 +163,35 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va, int psize, int ssize, int local) { unsigned long flags; - unsigned long result; - unsigned long pteg, bit; + int result; - spin_lock_irqsave(&ps3_bolttab_lock, flags); - result = lv1_write_htab_entry(0, slot, 0, 0); + spin_lock_irqsave(&ps3_htab_lock, flags); + + result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0); if (result) { - DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n", - __func__, va, slot, psize, result, result); + pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n", + __func__, result, va, slot, psize); BUG(); } - pteg = slot / HPTES_PER_GROUP; - bit = slot % HPTES_PER_GROUP; - inusetab[pteg] &= ~(0x80 >> bit); - spin_unlock_irqrestore(&ps3_bolttab_lock, flags); + spin_unlock_irqrestore(&ps3_htab_lock, flags); } static void ps3_hpte_clear(void) { - int result; + unsigned long hpte_count = (1UL << ppc64_pft_size) >> 4; + u64 i; - DBG(" -> %s:%d\n", __func__, __LINE__); - - result = lv1_unmap_htab(htab_addr); - BUG_ON(result); + for (i = 0; i < hpte_count; i++) + lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, i, 0, 0); ps3_mm_shutdown(); ps3_mm_vas_destroy(); - - DBG(" <- %s:%d\n", __func__, __LINE__); } void __init ps3_hpte_init(unsigned long htab_size) { - long bitmap_size; - - DBG(" -> %s:%d\n", __func__, __LINE__); - ppc_md.hpte_invalidate = ps3_hpte_invalidate; ppc_md.hpte_updatepp = ps3_hpte_updatepp; ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp; @@ -264,28 +200,5 @@ void __init ps3_hpte_init(unsigned long htab_size) ppc_md.hpte_clear_all = ps3_hpte_clear; ppc64_pft_size = __ilog2(htab_size); - - bitmap_size = htab_size / sizeof(struct hash_pte) / 8; - - bolttab = __va(lmb_alloc(bitmap_size, 1)); - inusetab = __va(lmb_alloc(bitmap_size, 1)); - - memset(bolttab, 0, bitmap_size); - memset(inusetab, 0, bitmap_size); - - DBG(" <- %s:%d\n", __func__, __LINE__); } -void __init ps3_map_htab(void) -{ - long result; - unsigned long htab_size = (1UL << ppc64_pft_size); - - result = lv1_map_htab(0, &htab_addr); - - htab = (__force struct hash_pte *)ioremap_flags(htab_addr, htab_size, - pgprot_val(PAGE_READONLY_X)); - - DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__, - htab_addr, (unsigned long)htab); -} diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c index a413abbd412..77bc330263c 100644 --- a/arch/powerpc/platforms/ps3/setup.c +++ b/arch/powerpc/platforms/ps3/setup.c @@ -201,7 +201,6 @@ static void __init ps3_setup_arch(void) ps3_firmware_version.rev); ps3_spu_set_platform(); - ps3_map_htab(); #ifdef CONFIG_SMP smp_init_ps3(); From b47027795a22fe61f93de6010c120f26273fc693 Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Thu, 21 Aug 2008 06:18:56 +1000 Subject: [PATCH 106/638] powerpc/ps3: Fix ioremap of spu shadow regs Fix the ioremap of the spu shadow regs on the PS3. The current PS3 hypervisor requires the spu shadow regs to be mapped with the PTE page protection bits set as read-only (PP=3). This implementation uses the low level __ioremap() to bypass the page protection settings inforced by ioremap_flags() to get the needed PTE bits set for the shadow regs. This fixes a runtime failure on the PS3 introduced by the powerpc ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83 ("powerpc ioremap_prot"). Signed-off-by: Masakazu Mokuno CC: Benjamin Herrenschmidt Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/spu.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index d135cef9ed6..ccae3d446b9 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -186,14 +186,24 @@ static void spu_unmap(struct spu *spu) iounmap(spu_pdata(spu)->shadow); } +/** + * setup_areas - Map the spu regions into the address space. + * + * The current HV requires the spu shadow regs to be mapped with the + * PTE page protection bits set as read-only (PP=3). This implementation + * uses the low level __ioremap() to bypass the page protection settings + * inforced by ioremap_flags() to get the needed PTE bits set for the + * shadow regs. + */ + static int __init setup_areas(struct spu *spu) { struct table {char* name; unsigned long addr; unsigned long size;}; + static const unsigned long shadow_flags = _PAGE_NO_CACHE | 3; - spu_pdata(spu)->shadow = ioremap_flags(spu_pdata(spu)->shadow_addr, - sizeof(struct spe_shadow), - pgprot_val(PAGE_READONLY) | - _PAGE_NO_CACHE); + spu_pdata(spu)->shadow = __ioremap(spu_pdata(spu)->shadow_addr, + sizeof(struct spe_shadow), + shadow_flags); if (!spu_pdata(spu)->shadow) { pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__); goto fail_ioremap; From d617a40227705eb0d7b7692bbb974d077f0219a9 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 21 Aug 2008 11:16:26 +1000 Subject: [PATCH 107/638] powerpc: Export CMO_PageSize This fixes an error building powerpc allmodconfig: ERROR: "CMO_PageSize" [arch/powerpc/platforms/pseries/cmm.ko] undefined! Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 3ce8a139b85..7b01d67b4e4 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -71,6 +71,7 @@ int CMO_PrPSP = -1; int CMO_SecPSP = -1; unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT); +EXPORT_SYMBOL(CMO_PageSize); int fwnmi_active; /* TRUE if an FWNMI handler is present */ From 6ce5eecb9cd3ac97b952c50309b87c31488a45e9 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 26 Aug 2008 00:37:14 +0000 Subject: [PATCH 108/638] [CIFS] check version in spnego upcall response Currently, we don't check the version in the SPNEGO upcall response even though one is provided. Jeff and Q have made the corresponding change to the Samba client (cifs.upcall). Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 6 +++++- fs/cifs/cifs_spnego.h | 2 +- fs/cifs/sess.c | 9 +++++++++ 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index f5d0083e09f..526041a52d3 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -4,7 +4,11 @@ Fix premature write failure on congested networks (we would give up on EAGAIN from the socket too quickly on large writes). Cifs_mkdir and cifs_create now respect the setgid bit on parent dir. Fix endian problems in acl (mode from/to cifs acl) on bigendian -architectures. +architectures. Fix problems with preserving timestamps on copying open +files (e.g. "cp -a") to Windows servers. For mkdir and create honor setgid bit +on parent directory when server supports Unix Extensions but not POSIX +create. Update cifs.upcall version to handle new Kerberos sec flags +(this requires update of cifs.upcall program from Samba). Version 1.53 ------------ diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h index 05a34b17a1a..e4041ec4d71 100644 --- a/fs/cifs/cifs_spnego.h +++ b/fs/cifs/cifs_spnego.h @@ -23,7 +23,7 @@ #ifndef _CIFS_SPNEGO_H #define _CIFS_SPNEGO_H -#define CIFS_SPNEGO_UPCALL_VERSION 1 +#define CIFS_SPNEGO_UPCALL_VERSION 2 /* * The version field should always be set to CIFS_SPNEGO_UPCALL_VERSION. diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 3188e4d9cdd..b537fad3bf5 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -516,6 +516,15 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, } msg = spnego_key->payload.data; + /* check version field to make sure that cifs.upcall is + sending us a response in an expected form */ + if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) { + cERROR(1, ("incorrect version of cifs.upcall (expected" + " %d but got %d)", + CIFS_SPNEGO_UPCALL_VERSION, msg->version)); + rc = -EKEYREJECTED; + goto ssetup_exit; + } /* bail out if key is too long */ if (msg->sesskey_len > sizeof(ses->server->mac_signing_key.data.krb5)) { From f73be6dedf4fa058ce80846dae604b08fa805ca1 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 17:07:14 -0700 Subject: [PATCH 109/638] smp: have smp_call_function_single() detect invalid CPUs Have smp_call_function_single() return invalid CPU indicies and return -ENXIO. This function is already executed inside a get_cpu()..put_cpu() which locks out CPU removal, so rather than having the higher layers doing another layer of locking to guard against unplugged CPUs do the test here. Signed-off-by: H. Peter Anvin --- kernel/smp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/smp.c b/kernel/smp.c index 782e2b93e46..f362a855377 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -210,8 +210,10 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, { struct call_single_data d; unsigned long flags; - /* prevent preemption and reschedule on another processor */ + /* prevent preemption and reschedule on another processor, + as well as CPU removal */ int me = get_cpu(); + int err = 0; /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -220,7 +222,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, local_irq_save(flags); func(info); local_irq_restore(flags); - } else { + } else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) { struct call_single_data *data = NULL; if (!wait) { @@ -236,10 +238,12 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, data->func = func; data->info = info; generic_exec_single(cpu, data); + } else { + err = -ENXIO; /* CPU not online */ } put_cpu(); - return 0; + return err; } EXPORT_SYMBOL(smp_call_function_single); From c6f31932d0a1d2b13952f506ebc92675e2d8df80 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 17:27:21 -0700 Subject: [PATCH 110/638] x86: msr: propagate errors from smp_call_function_single() Propagate error (-ENXIO) from smp_call_function_single(). These errors can happen when a CPU is unplugged while the MSR driver is open. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/msr.c | 14 ++++++++++---- arch/x86/lib/msr-on-cpu.c | 22 ++++++++++++---------- include/asm-x86/msr.h | 11 ++++++----- 3 files changed, 28 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index e4393808688..9c34a1005db 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -79,8 +79,11 @@ static ssize_t msr_read(struct file *file, char __user *buf, for (; count; count -= 8) { err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]); - if (err) - return -EIO; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + return err; + } if (copy_to_user(tmp, &data, 8)) return -EFAULT; tmp += 2; @@ -105,8 +108,11 @@ static ssize_t msr_write(struct file *file, const char __user *buf, if (copy_from_user(&data, tmp, 8)) return -EFAULT; err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); - if (err) - return -EIO; + if (err) { + if (err == -EFAULT) /* Fix idiotic error code */ + err = -EIO; + return err; + } tmp += 2; } diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c index d5a2b39f882..01b868ba82f 100644 --- a/arch/x86/lib/msr-on-cpu.c +++ b/arch/x86/lib/msr-on-cpu.c @@ -30,10 +30,11 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe) rv.msr_no = msr_no; if (safe) { - smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1); - err = rv.err; + err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, + &rv, 1); + err = err ? err : rv.err; } else { - smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); + err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1); } *l = rv.l; *h = rv.h; @@ -64,23 +65,24 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe) rv.l = l; rv.h = h; if (safe) { - smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1); - err = rv.err; + err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, + &rv, 1); + err = err ? err : rv.err; } else { - smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); + err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1); } return err; } -void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) +int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) { - _wrmsr_on_cpu(cpu, msr_no, l, h, 0); + return _wrmsr_on_cpu(cpu, msr_no, l, h, 0); } -void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) +int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) { - _rdmsr_on_cpu(cpu, msr_no, l, h, 0); + return _rdmsr_on_cpu(cpu, msr_no, l, h, 0); } /* These "safe" variants are slower and should be used when the target MSR diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h index ca110ee73f0..ad5f2decf7f 100644 --- a/include/asm-x86/msr.h +++ b/include/asm-x86/msr.h @@ -192,19 +192,20 @@ do { \ #define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0) #ifdef CONFIG_SMP -void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); -void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); +int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); +int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); - int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); #else /* CONFIG_SMP */ -static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) +static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) { rdmsr(msr_no, *l, *h); + return 0; } -static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) +static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h) { wrmsr(msr_no, l, h); + return 0; } static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h) From 4b46ca701bdcdc19fcf32823f9fcabf8236e4e78 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 17:28:20 -0700 Subject: [PATCH 111/638] x86: cpuid: propagate error from smp_call_function_single() Propagate error (-ENXIO) from smp_call_function_single() in the CPUID driver. This can happen when a CPU is unplugged while the CPUID driver is open. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpuid.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 14b11b3be31..23e8316c835 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -89,6 +89,7 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, struct cpuid_regs cmd; int cpu = iminor(file->f_path.dentry->d_inode); u64 pos = *ppos; + int err; if (count % 16) return -EINVAL; /* Invalid chunk size */ @@ -96,7 +97,9 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, for (; count; count -= 16) { cmd.eax = pos; cmd.ecx = pos >> 32; - smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); + err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); + if (err) + return err; if (copy_to_user(tmp, &cmd, 16)) return -EFAULT; tmp += 16; From 85f1cb60157e06d9e8996b02fad9ba6964523d75 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 17:34:27 -0700 Subject: [PATCH 112/638] x86: msr: correct return value on partial operations Return the correct return value when the MSR driver partially completes a request (we should return the number of bytes actually read or written, instead of the error code.) Signed-off-by: H. Peter Anvin --- arch/x86/kernel/msr.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 9c34a1005db..2e2af5d1819 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -72,7 +72,8 @@ static ssize_t msr_read(struct file *file, char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ @@ -82,14 +83,17 @@ static ssize_t msr_read(struct file *file, char __user *buf, if (err) { if (err == -EFAULT) /* Fix idiotic error code */ err = -EIO; - return err; + break; + } + if (copy_to_user(tmp, &data, 8)) { + err = -EFAULT; + break; } - if (copy_to_user(tmp, &data, 8)) - return -EFAULT; tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static ssize_t msr_write(struct file *file, const char __user *buf, @@ -99,24 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf, u32 data[2]; u32 reg = *ppos; int cpu = iminor(file->f_path.dentry->d_inode); - int err; + int err = 0; + ssize_t bytes = 0; if (count % 8) return -EINVAL; /* Invalid chunk size */ for (; count; count -= 8) { - if (copy_from_user(&data, tmp, 8)) - return -EFAULT; + if (copy_from_user(&data, tmp, 8)) { + err = -EFAULT; + break; + } err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]); if (err) { if (err == -EFAULT) /* Fix idiotic error code */ err = -EIO; - return err; + break; } tmp += 2; + bytes += 8; } - return ((char __user *)tmp) - buf; + return bytes ? bytes : err; } static int msr_open(struct inode *inode, struct file *file) From 9ea2b82ed6265a31f9a84886d74d8a2ef01b27c8 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 17:35:25 -0700 Subject: [PATCH 113/638] x86: cpuid: correct return value on partial operations Return the correct return value when the CPUID driver partially completes a request (we should return the number of bytes actually read or written, instead of the error code.) Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpuid.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 23e8316c835..8e9cd6a8ec1 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -89,7 +89,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, struct cpuid_regs cmd; int cpu = iminor(file->f_path.dentry->d_inode); u64 pos = *ppos; - int err; + ssize_t bytes = 0; + int err = 0; if (count % 16) return -EINVAL; /* Invalid chunk size */ @@ -99,14 +100,17 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, cmd.ecx = pos >> 32; err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1); if (err) - return err; - if (copy_to_user(tmp, &cmd, 16)) - return -EFAULT; + break; + if (copy_to_user(tmp, &cmd, 16)) { + err = -EFAULT; + break; + } tmp += 16; + bytes += 16; *ppos = ++pos; } - return tmp - buf; + return bytes ? bytes : err; } static int cpuid_open(struct inode *inode, struct file *file) From e5778ec91e823b97262f045814d34d0abde689c0 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 26 Aug 2008 10:33:32 +1000 Subject: [PATCH 114/638] ALSA: fix for CA0106 on MSI K8N Diamond PLUS Motherboard Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- sound/pci/ca0106/ca0106_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c index 03a274becae..6abe8a3bd36 100644 --- a/sound/pci/ca0106/ca0106_main.c +++ b/sound/pci/ca0106/ca0106_main.c @@ -254,7 +254,7 @@ static struct snd_ca0106_details ca0106_chip_details[] = { .name = "MSI K8N Diamond MB", .gpio_type = 2, .i2c_adc = 1, - .spi_dac = 2 } + .spi_dac = 2 }, /* Shuttle XPC SD31P which has an onboard Creative Labs * Sound Blaster Live! 24-bit EAX * high-definition 7.1 audio processor". From 9bdbb9633281b58ff483ede723f8c4a6344cab2f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 26 Aug 2008 13:31:55 +1000 Subject: [PATCH 115/638] powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras --- arch/powerpc/configs/chrp32_defconfig | 141 ++++++--- arch/powerpc/configs/g5_defconfig | 229 ++++++++------- arch/powerpc/configs/iseries_defconfig | 87 ++++-- arch/powerpc/configs/maple_defconfig | 385 +++++++++++++++++-------- arch/powerpc/configs/pmac32_defconfig | 245 ++++++++-------- arch/powerpc/configs/ppc64_defconfig | 239 ++++++++------- arch/powerpc/configs/ppc6xx_defconfig | 144 ++++----- arch/powerpc/configs/pseries_defconfig | 172 ++++++++--- 8 files changed, 1008 insertions(+), 634 deletions(-) diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 05360d4ef1b..2e0ef8c1822 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:00:44 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:12:40 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -117,10 +117,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +144,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -157,19 +164,18 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set CONFIG_PPC_NATIVE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set @@ -201,7 +207,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -225,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -232,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -268,10 +276,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -398,7 +402,9 @@ CONFIG_NF_NAT_SIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -440,6 +448,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y @@ -454,7 +463,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -472,10 +480,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -493,8 +499,6 @@ CONFIG_BLK_DEV_SL82C105=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -588,6 +592,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -595,12 +600,15 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -660,14 +668,12 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set -# CONFIG_VIA_RHINE_NAPI is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -683,6 +689,7 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -773,6 +780,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -798,12 +806,14 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -848,46 +858,71 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_HYDRA is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_ISA is not set # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -896,10 +931,13 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -911,8 +949,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -997,10 +1037,13 @@ CONFIG_FB_3DFX=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -1030,10 +1073,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1062,6 +1101,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1087,6 +1127,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1108,6 +1149,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1116,7 +1158,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1129,7 +1170,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1146,6 +1186,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1226,6 +1267,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1310,6 +1352,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1336,6 +1379,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1354,20 +1399,32 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set @@ -1424,6 +1481,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 0ccc6e493dc..cfa5d053ee5 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Mon Jun 16 21:08:31 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:15:06 2008 # CONFIG_PPC64=y @@ -13,6 +13,7 @@ CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +# CONFIG_VSX is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y @@ -30,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -94,9 +96,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -121,10 +122,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -140,6 +147,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -160,13 +168,8 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set @@ -224,7 +227,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -265,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_ARCH_WANTS_FREEZER_CONTROL=y # CONFIG_PM is not set CONFIG_SECCOMP=y @@ -290,10 +295,6 @@ CONFIG_PCI_MSI=y CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -307,6 +308,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -422,6 +424,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -449,12 +453,14 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -462,6 +468,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -492,10 +499,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -516,8 +521,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -592,6 +595,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -675,29 +679,21 @@ CONFIG_DM_ZERO=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# -# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -CONFIG_IEEE1394_VIDEO1394=m +# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_ADB_PMU=y @@ -712,7 +708,6 @@ CONFIG_WINDFARM_PM112=y CONFIG_WINDFARM_PM121=y # CONFIG_PMAC_RACKMETER is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -720,7 +715,23 @@ CONFIG_BONDING=m CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -740,10 +751,8 @@ CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -758,6 +767,7 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -855,6 +865,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -869,12 +880,14 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -909,44 +922,69 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -955,10 +993,13 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -970,8 +1011,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1050,10 +1093,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -1077,15 +1123,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1103,19 +1141,13 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1177,20 +1209,9 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# +CONFIG_SND_PPC=y CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y - -# -# ALSA PowerPC devices -# - -# -# Apple Onboard Audio driver -# CONFIG_SND_AOA=m CONFIG_SND_AOA_FABRIC_LAYOUT=m CONFIG_SND_AOA_ONYX=m @@ -1198,30 +1219,11 @@ CONFIG_SND_AOA_TAS=m CONFIG_SND_AOA_TOONIE=m CONFIG_SND_AOA_SOUNDBUS=m CONFIG_SND_AOA_SOUNDBUS_I2S=m - -# -# USB devices -# +CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1256,6 +1258,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1306,6 +1309,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1314,7 +1318,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1323,7 +1326,6 @@ CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set @@ -1383,7 +1385,6 @@ CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1497,6 +1498,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1519,7 +1521,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1603,6 +1604,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1629,8 +1631,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1644,22 +1648,37 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set CONFIG_BOOTX_TEXT=y @@ -1718,6 +1737,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 63f0bdb6340..2c3f13577f4 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:01:36 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:15:49 2008 # CONFIG_PPC64=y @@ -31,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -94,9 +95,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -120,10 +120,16 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -139,6 +145,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -159,9 +166,6 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set CONFIG_LPARCFG=y CONFIG_PPC_ISERIES=y @@ -173,8 +177,6 @@ CONFIG_VIODASD=y CONFIG_VIOCD=m CONFIG_VIOTAPE=m CONFIG_VIOPATH=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -211,7 +213,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -241,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -250,6 +253,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -274,10 +278,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -291,6 +291,7 @@ CONFIG_XFRM_USER=m CONFIG_XFRM_SUB_POLICY=y # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -480,7 +481,9 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -504,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -588,6 +593,7 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -612,12 +618,15 @@ CONFIG_DM_ZERO=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -655,6 +664,7 @@ CONFIG_E100=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y @@ -662,10 +672,8 @@ CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -680,6 +688,7 @@ CONFIG_E1000=m # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -767,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -789,6 +799,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y CONFIG_HVC_ISERIES=y # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -803,10 +814,13 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -818,8 +832,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -858,10 +874,6 @@ CONFIG_SSB_POSSIBLE=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -910,7 +922,6 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_NOLOCK=m CONFIG_GFS2_FS_LOCKING_DLM=m # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -967,6 +978,7 @@ CONFIG_CONFIGFS_FS=m CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -989,7 +1001,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1059,6 +1070,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1089,8 +1101,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1104,22 +1118,37 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set @@ -1178,6 +1207,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 7a166a39d92..1a3b6423222 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:26 2007 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:18:58 2008 # CONFIG_PPC64=y @@ -27,7 +27,12 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y @@ -67,16 +72,20 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -101,10 +112,28 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -114,6 +143,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -128,29 +158,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC52xx is not set -# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y # CONFIG_PPC_PASEMI is not set -# CONFIG_PPC_CELLEB is not set # CONFIG_PPC_PS3 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_CELLEB is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y +# CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -166,7 +193,6 @@ CONFIG_PPC_970_NAP=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # @@ -181,16 +207,19 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -207,18 +236,21 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y -# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # @@ -237,11 +269,10 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 - -# -# Networking -# +CONFIG_PHYSICAL_START=0x00000000 CONFIG_NET=y # @@ -254,6 +285,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -284,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -308,7 +338,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -334,12 +366,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -354,24 +389,30 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -381,14 +422,13 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -399,10 +439,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -419,10 +457,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -483,6 +518,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_IPR=y @@ -496,9 +532,13 @@ CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y CONFIG_ATA_NONSTANDARD=y +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -508,7 +548,6 @@ CONFIG_ATA_NONSTANDARD=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -537,6 +576,7 @@ CONFIG_ATA_NONSTANDARD=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -551,27 +591,47 @@ CONFIG_ATA_NONSTANDARD=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -587,7 +647,6 @@ CONFIG_MII=y CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set @@ -598,18 +657,21 @@ CONFIG_AMD8111_ETH=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -617,12 +679,12 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -632,9 +694,10 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set -# CONFIG_PASEMI_MAC is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -642,6 +705,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -657,7 +721,6 @@ CONFIG_USB_PEGASUS=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -702,10 +765,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -742,49 +808,62 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -793,15 +872,14 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -813,13 +891,25 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -842,10 +932,6 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -865,6 +951,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -873,15 +960,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -896,6 +986,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -912,20 +1003,15 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set @@ -943,6 +1029,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=y CONFIG_USB_SERIAL_KEYSPAN_MPR=y @@ -962,9 +1049,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -974,7 +1063,6 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers @@ -982,7 +1070,6 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -999,24 +1086,16 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1037,12 +1116,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1088,8 +1165,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1097,16 +1177,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1177,14 +1255,15 @@ CONFIG_NLS_DEFAULT="utf-8" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_UCC_SLOW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1194,7 +1273,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -# CONFIG_INSTRUMENTATION is not set +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1202,6 +1281,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1209,34 +1289,59 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FORCED_INLINING is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BOOTX_TEXT=y @@ -1249,44 +1354,84 @@ CONFIG_BOOTX_TEXT=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 3688e4bb6fc..80481f27013 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:02:24 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:20:26 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -93,9 +94,8 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -120,10 +120,16 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -140,6 +146,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -159,19 +166,18 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set CONFIG_PPC_NATIVE=y # CONFIG_IPIC is not set @@ -221,7 +227,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -244,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -251,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_ARCH_WANTS_FREEZER_CONTROL=y CONFIG_PM=y CONFIG_PM_DEBUG=y @@ -314,10 +322,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -501,7 +505,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_SCH_FIFO=y # # Network testing @@ -571,6 +574,7 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIUSB=m # CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBPA10X is not set @@ -588,27 +592,18 @@ CONFIG_BT_HCIBFUSB=m CONFIG_CFG80211=m CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m @@ -628,6 +623,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -656,12 +653,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -669,6 +668,8 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -685,7 +686,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -703,10 +703,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -727,8 +725,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -820,6 +816,7 @@ CONFIG_SCSI_MESH_RESET_DELAY_MS=4000 CONFIG_SCSI_MAC53C94=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -844,30 +841,22 @@ CONFIG_DM_ZERO=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=m - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# -# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=m - -# -# Protocols -# -CONFIG_IEEE1394_VIDEO1394=m +# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set -CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_ADB=y @@ -887,7 +876,6 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set CONFIG_PMAC_RACKMETER=m CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -936,7 +924,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -952,6 +939,7 @@ CONFIG_NETDEV_1000=y # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -994,13 +982,15 @@ CONFIG_PRISM54=m # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set # CONFIG_ATH5K is not set +# CONFIG_ATH9K is not set # CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWL4965 is not set +# CONFIG_IWLAGN is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set CONFIG_B43=m @@ -1095,6 +1085,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -1109,12 +1100,14 @@ CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -1165,45 +1158,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_POWERMAC=y -# CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1212,6 +1230,8 @@ CONFIG_I2C_POWERMAC=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set @@ -1221,6 +1241,7 @@ CONFIG_APM_POWER=y CONFIG_BATTERY_PMU=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -1241,8 +1262,10 @@ CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1343,10 +1366,13 @@ CONFIG_FB_3DFX=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -1374,15 +1400,7 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1400,19 +1418,13 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1474,20 +1486,9 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# +CONFIG_SND_PPC=y CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y - -# -# ALSA PowerPC devices -# - -# -# Apple Onboard Audio driver -# CONFIG_SND_AOA=m CONFIG_SND_AOA_FABRIC_LAYOUT=m CONFIG_SND_AOA_ONYX=m @@ -1495,36 +1496,14 @@ CONFIG_SND_AOA_TAS=m CONFIG_SND_AOA_TOONIE=m CONFIG_SND_AOA_SOUNDBUS=m CONFIG_SND_AOA_SOUNDBUS_I2S=m - -# -# USB devices -# +CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1554,6 +1533,7 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1579,6 +1559,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1600,6 +1581,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1608,7 +1590,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1617,7 +1598,6 @@ CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_CH341 is not set @@ -1676,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1693,6 +1672,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1702,6 +1682,8 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1789,6 +1771,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1811,7 +1794,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1891,6 +1873,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1921,8 +1904,10 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1933,24 +1918,38 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y @@ -2009,6 +2008,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index ce250bc9858..fc5930caeb5 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Mon Jun 16 21:11:19 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:22:03 2008 # CONFIG_PPC64=y @@ -14,6 +14,7 @@ CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +CONFIG_VSX=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y @@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -105,7 +107,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -129,14 +130,20 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -172,14 +180,13 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_PPC_PSERIES=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_PPC_SMLPAR=y +CONFIG_CMM=y CONFIG_PPC_ISERIES=y # @@ -189,8 +196,6 @@ CONFIG_VIODASD=y CONFIG_VIOCD=m CONFIG_VIOTAPE=m CONFIG_VIOPATH=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y @@ -213,11 +218,15 @@ CONFIG_PPC_CELLEB=y # CONFIG_SPU_FS=m CONFIG_SPU_FS_64K_LS=y +# CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y +CONFIG_PPC_IBM_CELL_RESETBUTTON=y +CONFIG_PPC_IBM_CELL_POWERBUTTON=m CONFIG_CBE_THERM=m CONFIG_CBE_CPUFREQ=m CONFIG_CBE_CPUFREQ_PMI=m +CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m CONFIG_OPROFILE_CELL=y # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y @@ -279,7 +288,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -315,8 +324,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -327,6 +338,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" CONFIG_ARCH_WANTS_FREEZER_CONTROL=y # CONFIG_PM is not set CONFIG_SECCOMP=y @@ -370,10 +382,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -387,6 +395,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -578,6 +587,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -603,12 +614,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -616,6 +629,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -649,10 +663,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -674,8 +686,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -737,6 +747,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set CONFIG_SCSI_IBMVSCSI=y +CONFIG_SCSI_IBMVFC=m +CONFIG_SCSI_IBMVFC_TRACE=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_MVSAS is not set @@ -758,6 +770,7 @@ CONFIG_SCSI_LPFC=m CONFIG_SCSI_DEBUG=m # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y CONFIG_ATA_NONSTANDARD=y CONFIG_SATA_PMP=y @@ -837,9 +850,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set @@ -847,29 +857,21 @@ CONFIG_DM_MULTIPATH_EMC=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# -# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -CONFIG_IEEE1394_VIDEO1394=m +# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_SBP2=m CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_ADB_PMU=y @@ -884,7 +886,6 @@ CONFIG_WINDFARM_PM112=y CONFIG_WINDFARM_PM121=y # CONFIG_PMAC_RACKMETER is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -942,6 +943,7 @@ CONFIG_E100=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y @@ -949,10 +951,8 @@ CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -968,13 +968,13 @@ CONFIG_TIGON3=y CONFIG_SPIDER_NET=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set CONFIG_EHEA=m # CONFIG_IXGBE is not set CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set @@ -1068,6 +1068,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -1090,12 +1091,14 @@ CONFIG_SERIO_I8042=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -1131,11 +1134,13 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y CONFIG_HVC_CONSOLE=y CONFIG_HVC_ISERIES=y CONFIG_HVC_RTAS=y CONFIG_HVC_BEAT=y CONFIG_HVCS=m +CONFIG_IBM_BSR=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set @@ -1156,45 +1161,70 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set CONFIG_I2C_AMD8111=y # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_PASEMI=y -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +CONFIG_I2C_POWERMAC=y + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PASEMI=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1203,10 +1233,13 @@ CONFIG_I2C_PASEMI=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -1218,8 +1251,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1299,10 +1334,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -1331,15 +1369,7 @@ CONFIG_FB_LOGO_EXTRA=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1355,19 +1385,13 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1429,20 +1453,9 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# +CONFIG_SND_PPC=y CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y - -# -# ALSA PowerPC devices -# - -# -# Apple Onboard Audio driver -# CONFIG_SND_AOA=m CONFIG_SND_AOA_FABRIC_LAYOUT=m CONFIG_SND_AOA_ONYX=m @@ -1450,36 +1463,14 @@ CONFIG_SND_AOA_TAS=m CONFIG_SND_AOA_TOONIE=m CONFIG_SND_AOA_SOUNDBUS=m CONFIG_SND_AOA_SOUNDBUS_I2S=m - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1508,6 +1499,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -1556,6 +1548,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1564,7 +1557,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1577,7 +1569,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1769,6 +1760,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1779,12 +1771,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1793,7 +1785,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1878,6 +1869,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1910,8 +1902,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1923,28 +1917,47 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set +CONFIG_TRACE_IRQFLAGS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACING=y +# CONFIG_FTRACE is not set +CONFIG_IRQSOFF_TRACER=y +CONFIG_SCHED_TRACER=y +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_HCALL_STATS is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set CONFIG_BOOTX_TEXT=y @@ -2007,6 +2020,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index e6e91c85da3..3c6dbdef56e 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -1,8 +1,7 @@ -# powerpc # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-git2 -# Tue Jul 15 23:54:18 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:29:50 2008 # # CONFIG_PPC64 is not set @@ -112,7 +111,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -140,12 +138,17 @@ CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_DMA_ATTRS is not set # CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -266,7 +269,6 @@ CONFIG_TAU=y CONFIG_TAU_AVERAGE=y CONFIG_QUICC_ENGINE=y CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y CONFIG_PPC_BESTCOMM=y @@ -287,7 +289,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -311,6 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -326,6 +329,7 @@ CONFIG_PM_DEBUG=y CONFIG_CAN_PM_TRACE=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" @@ -344,6 +348,7 @@ CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y CONFIG_FSL_LBC=y CONFIG_FSL_GTM=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -395,10 +400,6 @@ CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 # CONFIG_TASK_SIZE_BOOL is not set CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -412,6 +413,7 @@ CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -602,6 +604,7 @@ CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -626,6 +629,7 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m # # DECnet: Netfilter Configuration @@ -643,6 +647,7 @@ CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m @@ -691,8 +696,10 @@ CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=m CONFIG_DECNET_ROUTER=y CONFIG_LLC=m @@ -832,6 +839,7 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIUSB=m CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -855,7 +863,6 @@ CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m -CONFIG_MAC80211_QOS=y # # Rate control algorithm selection @@ -941,12 +948,14 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_VIRTIO_BLK=m +CONFIG_BLK_DEV_HD=y CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=m # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -954,6 +963,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -971,7 +981,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEDMA_SFF=y @@ -990,10 +999,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -1014,8 +1021,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y -CONFIG_BLK_DEV_HD_ONLY=y -CONFIG_BLK_DEV_HD=y # # SCSI device support @@ -1125,6 +1130,7 @@ CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m +# CONFIG_SCSI_DH_ALUA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_PMP is not set @@ -1246,7 +1252,6 @@ CONFIG_WINDFARM=y # CONFIG_ANSLCD is not set CONFIG_PMAC_RACKMETER=m CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y CONFIG_IFB=m CONFIG_DUMMY=m CONFIG_BONDING=m @@ -1256,7 +1261,7 @@ CONFIG_TUN=m CONFIG_VETH=m CONFIG_NET_SB1000=m # CONFIG_ARCNET is not set -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers @@ -1271,7 +1276,9 @@ CONFIG_SMSC_PHY=m CONFIG_BROADCOM_PHY=m CONFIG_ICPLUS_PHY=m CONFIG_REALTEK_PHY=m +# CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y +# CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MACE=m @@ -1328,9 +1335,7 @@ CONFIG_NE2000=m CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m -CONFIG_AMD8111E_NAPI=y CONFIG_ADAPTEC_STARFIRE=m -CONFIG_ADAPTEC_STARFIRE_NAPI=y # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set CONFIG_B44=m @@ -1359,7 +1364,6 @@ CONFIG_SUNDANCE=m CONFIG_TLAN=m CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_RHINE_NAPI=y CONFIG_SC92031=m CONFIG_NET_POCKET=y CONFIG_DE600=m @@ -1372,17 +1376,15 @@ CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m -CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_E1000E=m -CONFIG_E1000E_ENABLED=y CONFIG_IP1000=m CONFIG_IGB=m +CONFIG_IGB_LRO=y CONFIG_NS83820=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_R8169=m -CONFIG_R8169_NAPI=y CONFIG_R8169_VLAN=y CONFIG_SIS190=m CONFIG_SKGE=m @@ -1393,21 +1395,18 @@ CONFIG_VIA_VELOCITY=m CONFIG_TIGON3=m CONFIG_BNX2=m CONFIG_GIANFAR=m -CONFIG_GFAR_NAPI=y # CONFIG_UCC_GETH is not set CONFIG_MV643XX_ETH=m CONFIG_QLA3XXX=m CONFIG_ATL1=m +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T1_NAPI=y CONFIG_CHELSIO_T3=m CONFIG_IXGBE=m CONFIG_IXGB=m -CONFIG_IXGB_NAPI=y CONFIG_S2IO=m -CONFIG_S2IO_NAPI=y CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m CONFIG_NIU=m @@ -1477,8 +1476,7 @@ CONFIG_ATM_IDT77252_USE_SUNI=y # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set -CONFIG_ATM_FORE200E_MAYBE=m -# CONFIG_ATM_FORE200E_PCA is not set +# CONFIG_ATM_FORE200E is not set CONFIG_ATM_HE=m # CONFIG_ATM_HE_USE_SUNI is not set CONFIG_FDDI=y @@ -1551,6 +1549,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set @@ -1611,33 +1610,18 @@ CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m +# CONFIG_SERIO_XILINX_XPS_PS2 is not set CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m -CONFIG_INPUT_LIRC=y -CONFIG_LIRC_DEV=m -CONFIG_LIRC_ATIUSB=m -CONFIG_LIRC_BT829=m -CONFIG_LIRC_CMDIR=m -CONFIG_LIRC_I2C=m -CONFIG_LIRC_IGORPLUGUSB=m -CONFIG_LIRC_IMON=m -CONFIG_LIRC_IT87=m -CONFIG_LIRC_MCEUSB=m -CONFIG_LIRC_MCEUSB2=m -CONFIG_LIRC_PVR150=m -CONFIG_LIRC_PARALLEL=m -CONFIG_LIRC_SERIAL=m -CONFIG_LIRC_SIR=m -CONFIG_LIRC_STREAMZAP=m -CONFIG_LIRC_TTUSBIR=m # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -1701,12 +1685,12 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_CRASH is not set CONFIG_BRIQ_PANEL=m CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m # CONFIG_HVC_RTAS is not set +# CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=m @@ -1728,6 +1712,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCA=m @@ -1807,19 +1792,23 @@ CONFIG_SENSORS_TSL2550=m # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# +# PCI GPIO expanders: +# + # # SPI GPIO expanders: # @@ -1850,6 +1839,7 @@ CONFIG_APM_POWER=m CONFIG_BATTERY_PMU=m CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_SENSORS_AD7414 is not set CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m @@ -1913,8 +1903,9 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m +# CONFIG_ALIM7101_WDT is not set # CONFIG_MPC5200_WDT is not set -CONFIG_83xx_WDT=m +# CONFIG_8xxx_WDT is not set CONFIG_WATCHDOG_RTAS=m # @@ -1953,8 +1944,10 @@ CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=m # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1993,6 +1986,7 @@ CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEOBUF_GEN=m @@ -2000,13 +1994,13 @@ CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=m # # Encoders/decoders and other helper chips @@ -2108,6 +2102,8 @@ CONFIG_VIDEO_CX18=m # CONFIG_VIDEO_CAFE_CCIC is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y @@ -2133,11 +2129,14 @@ CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m +# CONFIG_USB_S2255 is not set CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_MT9M001=m # CONFIG_MT9M001_PCA9536_SWITCH is not set CONFIG_SOC_CAMERA_MT9V022=m # CONFIG_MT9V022_PCA9536_SWITCH is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set @@ -2194,6 +2193,8 @@ CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_ANYSEE is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_DVB_CINERGYT2=m @@ -2203,6 +2204,7 @@ CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512 CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250 CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100 +# CONFIG_DVB_SIANO_SMS1XXX is not set # # Supported FlexCopII (B2C2) Adapters @@ -2253,6 +2255,7 @@ CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_NXT6000=m @@ -2389,12 +2392,15 @@ CONFIG_FB_TRIDENT=m CONFIG_FB_TRIDENT_ACCEL=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set CONFIG_FB_SM501=m CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -2613,6 +2619,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -2640,6 +2647,7 @@ CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -2668,6 +2676,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y +# CONFIG_USB_STORAGE_SIERRA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set @@ -2676,7 +2685,6 @@ CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m -CONFIG_USB_MON=y # # USB port drivers @@ -2686,7 +2694,6 @@ CONFIG_USB_SERIAL=m CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_AIRPRIME=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m @@ -2734,7 +2741,6 @@ CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m -CONFIG_USB_AUERSWALD=m # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -2770,7 +2776,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -2853,6 +2861,7 @@ CONFIG_KS0108_PORT=0x378 CONFIG_KS0108_DELAY=2 CONFIG_UIO=m CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV=m CONFIG_UIO_SMX=m # @@ -2899,6 +2908,7 @@ CONFIG_GFS2_FS_LOCKING_DLM=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +CONFIG_OCFS2_FS_STATS=y # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -2959,11 +2969,9 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 CONFIG_VXFS_FS=m CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m # CONFIG_HPFS_FS is not set CONFIG_QNX4FS_FS=m CONFIG_ROMFS_FS=m @@ -2988,7 +2996,6 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -3011,7 +3018,6 @@ CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set CONFIG_9P_FS=m @@ -3087,7 +3093,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m -CONFIG_CRC_T10DIF=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -3120,6 +3126,8 @@ CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -3143,6 +3151,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_WRITECOUNT=y +CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y @@ -3158,6 +3167,7 @@ CONFIG_FAIL_MAKE_REQUEST=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_TRACER_MAX_TRACE=y @@ -3168,16 +3178,18 @@ CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_DYNAMIC_FTRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set +# CONFIG_BUILD_DOCSRC is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_KGDB_CONSOLE is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index fe6ffa683d7..e77c5e7a0be 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:03:28 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 13:31:07 2008 # CONFIG_PPC64=y @@ -14,6 +14,7 @@ CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +CONFIG_VSX=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y @@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y @@ -104,7 +106,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -132,11 +133,17 @@ CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -172,17 +180,14 @@ CONFIG_CLASSIC_RCU=y # Platform support # CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set CONFIG_PPC_PSERIES=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y CONFIG_SCANLOG=m CONFIG_LPARCFG=y +CONFIG_PPC_SMLPAR=y +CONFIG_CMM=y # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set @@ -226,7 +231,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -275,6 +280,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -304,10 +310,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -321,6 +323,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -498,6 +501,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -531,12 +536,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -544,6 +551,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -575,10 +583,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -596,8 +602,6 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -659,6 +663,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set CONFIG_SCSI_IBMVSCSI=y +CONFIG_SCSI_IBMVFC=m +CONFIG_SCSI_IBMVFC_TRACE=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set @@ -681,6 +687,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -703,9 +710,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -# CONFIG_DM_MULTIPATH_RDAC is not set -# CONFIG_DM_MULTIPATH_HP is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set @@ -713,12 +717,15 @@ CONFIG_DM_MULTIPATH_EMC=m # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -726,7 +733,23 @@ CONFIG_BONDING=m CONFIG_TUN=m # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -759,6 +782,7 @@ CONFIG_E100=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set @@ -767,10 +791,8 @@ CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -785,14 +807,14 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +CONFIG_EHEA=y # CONFIG_IXGBE is not set CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -883,6 +905,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -906,12 +929,14 @@ CONFIG_SERIO_I8042=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -943,6 +968,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y CONFIG_HVC_CONSOLE=y CONFIG_HVC_RTAS=y CONFIG_HVCS=m @@ -961,44 +987,65 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1007,10 +1054,13 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -1022,8 +1072,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1102,10 +1154,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set @@ -1133,10 +1188,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1165,6 +1216,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1190,6 +1242,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1211,6 +1264,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1219,7 +1273,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1233,7 +1286,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1250,6 +1302,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1316,6 +1369,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1371,6 +1425,7 @@ CONFIG_CONFIGFS_FS=m CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1394,7 +1449,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1463,6 +1517,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1495,8 +1550,10 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set @@ -1508,30 +1565,49 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set +CONFIG_TRACE_IRQFLAGS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACING=y +# CONFIG_FTRACE is not set +CONFIG_IRQSOFF_TRACER=y +CONFIG_SCHED_TRACER=y +CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HCALL_STATS=y -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y CONFIG_VIRQ_DEBUG=y # CONFIG_BOOTX_TEXT is not set @@ -1590,6 +1666,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m From 08970fc4e0385790a7b093adfaa4165a189f9eb0 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 22:39:15 -0700 Subject: [PATCH 116/638] x86: msr: fix bogus return values from rdmsr_safe/wrmsr_safe Impact: bogus error codes (+other?) on x86-64 The rdmsr_safe/wrmsr_safe routines have macros for the handling of the edx:eax arguments. Those macros take a variable number of assembly arguments. This is rather inherently incompatible with using %digit-style escapes in the inline assembly; replace those with %[name]-style escapes. This fixes miscompilation on x86-64, which at the very least caused bogus return values. It is possible that this could also corrupt the return value; I am not sure. Signed-off-by: H. Peter Anvin --- include/asm-x86/msr.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h index ad5f2decf7f..2362cfda1fb 100644 --- a/include/asm-x86/msr.h +++ b/include/asm-x86/msr.h @@ -52,14 +52,14 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr, { DECLARE_ARGS(val, low, high); - asm volatile("2: rdmsr ; xor %0,%0\n" + asm volatile("2: rdmsr ; xor %[err],%[err]\n" "1:\n\t" ".section .fixup,\"ax\"\n\t" - "3: mov %3,%0 ; jmp 1b\n\t" + "3: mov %[fault],%[err] ; jmp 1b\n\t" ".previous\n\t" _ASM_EXTABLE(2b, 3b) - : "=r" (*err), EAX_EDX_RET(val, low, high) - : "c" (msr), "i" (-EFAULT)); + : [err] "=r" (*err), EAX_EDX_RET(val, low, high) + : "c" (msr), [fault] "i" (-EFAULT)); return EAX_EDX_VAL(val, low, high); } @@ -73,15 +73,15 @@ static inline int native_write_msr_safe(unsigned int msr, unsigned low, unsigned high) { int err; - asm volatile("2: wrmsr ; xor %0,%0\n" + asm volatile("2: wrmsr ; xor %[err],%[err]\n" "1:\n\t" ".section .fixup,\"ax\"\n\t" - "3: mov %4,%0 ; jmp 1b\n\t" + "3: mov %[fault],%[err] ; jmp 1b\n\t" ".previous\n\t" _ASM_EXTABLE(2b, 3b) - : "=a" (err) + : [err] "=a" (err) : "c" (msr), "0" (low), "d" (high), - "i" (-EFAULT) + [fault] "i" (-EFAULT) : "memory"); return err; } From a64ae7a2256b56bbd2830749c580fa533b69758c Mon Sep 17 00:00:00 2001 From: Mike Crowe Date: Mon, 28 Jul 2008 13:12:52 +0100 Subject: [PATCH 117/638] [MIPS] Convert printk statements during kernel setup to use severity levels Signed-off-by: Mike Crowe Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 42 +++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 8af84867e74..2aae76bce29 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -78,7 +78,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type) /* Sanity check */ if (start + size < start) { - printk("Trying to add an invalid memory region, skipped\n"); + pr_warning("Trying to add an invalid memory region, skipped\n"); return; } @@ -92,7 +92,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type) } if (x == BOOT_MEM_MAP_MAX) { - printk("Ooops! Too many entries in the memory map!\n"); + pr_err("Ooops! Too many entries in the memory map!\n"); return; } @@ -108,22 +108,22 @@ static void __init print_memory_map(void) const int field = 2 * sizeof(unsigned long); for (i = 0; i < boot_mem_map.nr_map; i++) { - printk(" memory: %0*Lx @ %0*Lx ", + printk(KERN_INFO " memory: %0*Lx @ %0*Lx ", field, (unsigned long long) boot_mem_map.map[i].size, field, (unsigned long long) boot_mem_map.map[i].addr); switch (boot_mem_map.map[i].type) { case BOOT_MEM_RAM: - printk("(usable)\n"); + printk(KERN_CONT "(usable)\n"); break; case BOOT_MEM_ROM_DATA: - printk("(ROM data)\n"); + printk(KERN_CONT "(ROM data)\n"); break; case BOOT_MEM_RESERVED: - printk("(reserved)\n"); + printk(KERN_CONT "(reserved)\n"); break; default: - printk("type %lu\n", boot_mem_map.map[i].type); + printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type); break; } } @@ -185,11 +185,11 @@ static unsigned long __init init_initrd(void) sanitize: if (initrd_start & ~PAGE_MASK) { - printk(KERN_ERR "initrd start must be page aligned\n"); + pr_err("initrd start must be page aligned\n"); goto disable; } if (initrd_start < PAGE_OFFSET) { - printk(KERN_ERR "initrd start < PAGE_OFFSET\n"); + pr_err("initrd start < PAGE_OFFSET\n"); goto disable; } @@ -221,18 +221,18 @@ static void __init finalize_initrd(void) goto disable; } if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) { - printk("Initrd extends beyond end of memory"); + printk(KERN_ERR "Initrd extends beyond end of memory"); goto disable; } reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT); initrd_below_start_ok = 1; - printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n", - initrd_start, size); + pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n", + initrd_start, size); return; disable: - printk(" - disabling initrd\n"); + printk(KERN_CONT " - disabling initrd\n"); initrd_start = 0; initrd_end = 0; } @@ -310,14 +310,12 @@ static void __init bootmem_init(void) if (min_low_pfn >= max_low_pfn) panic("Incorrect memory mapping !!!"); if (min_low_pfn > ARCH_PFN_OFFSET) { - printk(KERN_INFO - "Wasting %lu bytes for tracking %lu unused pages\n", - (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page), - min_low_pfn - ARCH_PFN_OFFSET); + pr_info("Wasting %lu bytes for tracking %lu unused pages\n", + (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page), + min_low_pfn - ARCH_PFN_OFFSET); } else if (min_low_pfn < ARCH_PFN_OFFSET) { - printk(KERN_INFO - "%lu free pages won't be used\n", - ARCH_PFN_OFFSET - min_low_pfn); + pr_info("%lu free pages won't be used\n", + ARCH_PFN_OFFSET - min_low_pfn); } min_low_pfn = ARCH_PFN_OFFSET; @@ -471,7 +469,7 @@ static void __init arch_mem_init(char **cmdline_p) /* call board setup routine */ plat_mem_setup(); - printk("Determined physical RAM map:\n"); + pr_info("Determined physical RAM map:\n"); print_memory_map(); strlcpy(command_line, arcs_cmdline, sizeof(command_line)); @@ -482,7 +480,7 @@ static void __init arch_mem_init(char **cmdline_p) parse_early_param(); if (usermem) { - printk("User-defined physical RAM map:\n"); + pr_info("User-defined physical RAM map:\n"); print_memory_map(); } From 3885b71ba66bfd0dbe92e580c23eebaccd11248b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 31 Jul 2008 11:16:43 +0100 Subject: [PATCH 118/638] [MIPS] Wire up new syscalls. signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1. Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 6 ++++++ arch/mips/kernel/scall64-64.S | 6 ++++++ arch/mips/kernel/scall64-n32.S | 6 ++++++ arch/mips/kernel/scall64-o32.S | 6 ++++++ include/asm-mips/unistd.h | 30 ++++++++++++++++++++++++------ 5 files changed, 48 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index fc4fd4d705e..5e75a316f6b 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -647,6 +647,12 @@ einval: li v0, -EINVAL sys sys_timerfd_create 2 sys sys_timerfd_gettime 2 sys sys_timerfd_settime 4 + sys sys_signalfd4 4 + sys sys_eventfd2 2 /* 4325 */ + sys sys_epoll_create1 1 + sys sys_dup3 3 + sys sys_pipe2 2 + sys sys_inotify_init1 1 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 2b73fd1e452..3d58204c9d4 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -481,4 +481,10 @@ sys_call_table: PTR sys_timerfd_create /* 5280 */ PTR sys_timerfd_gettime PTR sys_timerfd_settime + PTR sys_signalfd4 + PTR sys_eventfd2 + PTR sys_epoll_create1 /* 5285 */ + PTR sys_dup3 + PTR sys_pipe2 + PTR sys_inotify_init1 .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 2654e75d2fe..da7f1b6ea0f 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -407,4 +407,10 @@ EXPORT(sysn32_call_table) PTR sys_timerfd_create PTR sys_timerfd_gettime /* 5285 */ PTR sys_timerfd_settime + PTR sys_signalfd4 + PTR sys_eventfd2 + PTR sys_epoll_create1 + PTR sys_dup3 /* 5290 */ + PTR sys_pipe2 + PTR sys_inotify_init1 .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 76167bea5a7..d7cd1aac9ad 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -529,4 +529,10 @@ sys_call_table: PTR sys_timerfd_create PTR sys_timerfd_gettime PTR sys_timerfd_settime + PTR compat_sys_signalfd4 + PTR sys_eventfd2 /* 4325 */ + PTR sys_epoll_create1 + PTR sys_dup3 + PTR sys_pipe2 + PTR sys_inotify_init1 .size sys_call_table,.-sys_call_table diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h index 4964c82f85f..a73e1531e15 100644 --- a/include/asm-mips/unistd.h +++ b/include/asm-mips/unistd.h @@ -344,16 +344,22 @@ #define __NR_timerfd_create (__NR_Linux + 321) #define __NR_timerfd_gettime (__NR_Linux + 322) #define __NR_timerfd_settime (__NR_Linux + 323) +#define __NR_signalfd4 (__NR_Linux + 324) +#define __NR_eventfd2 (__NR_Linux + 325) +#define __NR_epoll_create1 (__NR_Linux + 326) +#define __NR_dup3 (__NR_Linux + 327) +#define __NR_pipe2 (__NR_Linux + 328) +#define __NR_inotify_init1 (__NR_Linux + 329) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 323 +#define __NR_Linux_syscalls 329 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 323 +#define __NR_O32_Linux_syscalls 329 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -644,16 +650,22 @@ #define __NR_timerfd_create (__NR_Linux + 280) #define __NR_timerfd_gettime (__NR_Linux + 281) #define __NR_timerfd_settime (__NR_Linux + 282) +#define __NR_signalfd4 (__NR_Linux + 283) +#define __NR_eventfd2 (__NR_Linux + 284) +#define __NR_epoll_create1 (__NR_Linux + 285) +#define __NR_dup3 (__NR_Linux + 286) +#define __NR_pipe2 (__NR_Linux + 287) +#define __NR_inotify_init1 (__NR_Linux + 288) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 282 +#define __NR_Linux_syscalls 288 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 282 +#define __NR_64_Linux_syscalls 288 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -948,16 +960,22 @@ #define __NR_timerfd_create (__NR_Linux + 284) #define __NR_timerfd_gettime (__NR_Linux + 285) #define __NR_timerfd_settime (__NR_Linux + 286) +#define __NR_signalfd4 (__NR_Linux + 287) +#define __NR_eventfd2 (__NR_Linux + 288) +#define __NR_epoll_create1 (__NR_Linux + 289) +#define __NR_dup3 (__NR_Linux + 290) +#define __NR_pipe2 (__NR_Linux + 291) +#define __NR_inotify_init1 (__NR_Linux + 292) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 286 +#define __NR_Linux_syscalls 292 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 286 +#define __NR_N32_Linux_syscalls 292 #ifdef __KERNEL__ From 89ef3e85de5b5b95cefad2b20e1ed53435589b55 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 31 Jul 2008 13:08:14 +0100 Subject: [PATCH 119/638] [MIPS] Jazz: Fix build error by header file inclusion weeding. Signed-off-by: Ralf Baechle --- arch/mips/jazz/setup.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index b59ba6b93cd..7043f6b9ff3 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -5,33 +5,22 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle + * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle * Copyright (C) 2001 MIPS Technologies, Inc. * Copyright (C) 2007 by Thomas Bogendoerfer */ #include #include #include -#include -#include -#include #include -#include -#include #include #include #include -#include -#include #include #include #include -#include #include -#include -#include -#include extern asmlinkage void jazz_handle_int(void); From 2841d8b893fd326aa039f28c3040378db8ebe8ef Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 31 Jul 2008 13:38:44 +0100 Subject: [PATCH 120/638] [MIPS] emma2rh: Fix build error by header file inclusion weeding. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit CC arch/mips/emma2rh/markeins/setup.o In file included from arch/mips/emma2rh/markeins/setup.c:30: include/linux/ide.h:645: error: ‘CONFIG_IDE_MAX_HWIFS’ undeclared here (not in a function) make[1]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1 Signed-off-by: Ralf Baechle --- arch/mips/emma2rh/markeins/setup.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 822a20e21fa..b6a23ad539f 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -25,23 +25,9 @@ #include #include #include -#include -#include -#include -#include /* for HZ */ -#include -#include -#include -#include -#include -#include #include -#include -#include #include -#include -#include #include From 1374d084736fff6f72f1d143ffdaa90cddd86e7e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 31 Jul 2008 22:29:53 +0900 Subject: [PATCH 121/638] [MIPS] TXx9: Fix mips_hpt_frequency initialization The mips_hpt_frequency initialization code was lost in commit 94a4c32939dede9328c6e4face335eb8441fc18d (linux-mips.org) / 94a4c32939dede9328c6e4face335eb8441fc18d (kernel.org) "TXx9: Add 64-bit support". Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 1bc57d0f4c5..0afe94c48fb 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -328,6 +328,9 @@ void __init arch_init_irq(void) void __init plat_time_init(void) { +#ifdef CONFIG_CPU_TX49XX + mips_hpt_frequency = txx9_cpu_clock / 2; +#endif txx9_board_vec->time_init(); } From e522b7ccd26a9774cac9379476ae3c6e005c88be Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 5 Aug 2008 23:42:16 +0100 Subject: [PATCH 122/638] [MIPS] kgdb: smp_call_function's 3rd argument is a pointer. Signed-off-by: Ralf Baechle --- arch/mips/kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index c5a8b2d21ca..15dbfd9803e 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -68,7 +68,7 @@ static void kgdb_call_nmi_hook(void *ignored) void kgdb_roundup_cpus(unsigned long flags) { local_irq_enable(); - smp_call_function(kgdb_call_nmi_hook, NULL, NULL); + smp_call_function(kgdb_call_nmi_hook, NULL, 0); local_irq_disable(); } From 9391d6bbedfd28c20531be75a3929c62bb43676e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 5 Aug 2008 23:43:35 +0100 Subject: [PATCH 123/638] [MIPS] kgdb: s/(void *)0)/NULL/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 15dbfd9803e..66089456746 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -62,7 +62,7 @@ void arch_kgdb_breakpoint(void) static void kgdb_call_nmi_hook(void *ignored) { - kgdb_nmicallback(raw_smp_processor_id(), (void *)0); + kgdb_nmicallback(raw_smp_processor_id(), NULL); } void kgdb_roundup_cpus(unsigned long flags) From a571444a06257558039619a9eecfb137812670eb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 5 Aug 2008 23:44:49 +0100 Subject: [PATCH 124/638] [MIPS] IP27: Export symbol pcibus_to_node to modules. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci-ip27.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index ce92f82b16d..bd78368c82b 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -205,6 +205,7 @@ int pcibus_to_node(struct pci_bus *bus) return bc->nasid; } +EXPORT_SYMBOL(pcibus_to_node); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, pci_fixup_ioc3); From 1ddfe82dc687bd786cc75c0ea973588394665e60 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 5 Aug 2008 22:24:18 +0200 Subject: [PATCH 125/638] [MIPS] RB532: Do not define registers that are already defined Use the register definitions of the MPMC controller from mach-rc32434/rb.h instead of redefining them. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 44fb0a62877..82ab395efa3 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -49,8 +49,6 @@ #define GPIO_ALE (1 << 0x0a) #define GPIO_CLE (1 << 0x0b) -extern char *board_type; - static struct resource korina_dev0_res[] = { { .name = "korina_regs", @@ -265,14 +263,6 @@ static void __init parse_mac_addr(char *macstr) } -/* DEVICE CONTROLLER 1 */ -#define CFG_DC_DEV1 ((void *)0xb8010010) -#define CFG_DC_DEV2 ((void *)0xb8010020) -#define CFG_DC_DEVBASE 0x0 -#define CFG_DC_DEVMASK 0x4 -#define CFG_DC_DEVC 0x8 -#define CFG_DC_DEVTC 0xC - /* NAND definitions */ #define NAND_CHIP_DELAY 25 @@ -301,16 +291,16 @@ static void __init rb532_nand_setup(void) static int __init plat_setup_devices(void) { /* Look for the CF card reader */ - if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK)) + if (!readl(IDT434_REG_BASE + DEV1MASK)) rb532_devs[1] = NULL; else { cf_slot0_res[0].start = - readl(CFG_DC_DEV1 + CFG_DC_DEVBASE); + readl(IDT434_REG_BASE + DEV1BASE); cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; } /* Read the NAND resources from the device controller */ - nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE); + nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; /* Initialise the NAND device */ From b895760dfb9b7ab921b066141d618bc6877f5d4b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 11 Aug 2008 23:05:35 +0900 Subject: [PATCH 126/638] [MIPS] kgdb: Do not call fixup_exception kgdb_mips_notify is called on IBE/DBE/FPE/BP/TRAP/RI exception. None of them need fixup. And doing fixup for a breakpoint exception will confuse gdb. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/kgdb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c index 66089456746..8f6d58ede33 100644 --- a/arch/mips/kernel/kgdb.c +++ b/arch/mips/kernel/kgdb.c @@ -190,9 +190,6 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, struct pt_regs *regs = args->regs; int trap = (regs->cp0_cause & 0x7c) >> 2; - if (fixup_exception(regs)) - return NOTIFY_DONE; - /* Userpace events, ignore. */ if (user_mode(regs)) return NOTIFY_DONE; From 3e6259c3ef30432b4a067d6362738c236eb2e680 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 19 Aug 2008 21:28:21 +0200 Subject: [PATCH 127/638] [MIPS] Ignore vmlinux.lds generated files This patch adds the proper .gitignore file to ignore vmlinux.lds generated in arch/mips/kernel/. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/mips/kernel/.gitignore diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/mips/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds From 2189459d25a47401c69a17794c9d390c890351f9 Mon Sep 17 00:00:00 2001 From: Joe Korty Date: Mon, 25 Aug 2008 17:15:33 -0400 Subject: [PATCH 128/638] lockstat: fix numerical output rounding error Fix rounding error in /proc/lock_stat numerical output. On occasion the two digit fractional part contains the three digit value '100'. This is due to a bug in the rounding algorithm which pushes values in the range '95..99' to '100' rather than to '00' + an increment to the integer part. For example, - 123456.100 old display + 123457.00 new display Signed-off-by: Ingo Molnar --- kernel/lockdep_proc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c index 4b194d34d77..20dbcbf9c7d 100644 --- a/kernel/lockdep_proc.c +++ b/kernel/lockdep_proc.c @@ -472,8 +472,9 @@ static void snprint_time(char *buf, size_t bufsiz, s64 nr) { unsigned long rem; + nr += 5; /* for display rounding */ rem = do_div(nr, 1000); /* XXX: do_div_signed */ - snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, ((int)rem+5)/10); + snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, (int)rem/10); } static void seq_time(struct seq_file *m, s64 time) From 04148b73b89d49fe0fe201bcee395e51f7d637ce Mon Sep 17 00:00:00 2001 From: Joe Korty Date: Mon, 25 Aug 2008 17:16:23 -0400 Subject: [PATCH 129/638] lockstat: repair erronous contention statistics Fix bad contention counting in /proc/lock_stat. /proc/lockstat tries to gather per-ip contention statistics per-lock. This was failing due to a garbage per-ip index selector being used. Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 3bfb1877a00..b5db51d2803 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -3029,7 +3029,7 @@ found_it: stats = get_lock_stats(hlock_class(hlock)); if (point < ARRAY_SIZE(stats->contention_point)) - stats->contention_point[i]++; + stats->contention_point[point]++; if (lock->cpu != smp_processor_id()) stats->bounces[bounce_contended + !!hlock->read]++; put_lock_stats(stats); From 3d839e5b87a70effc629c1cdbf77d837ef141919 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 26 Aug 2008 11:06:26 +0200 Subject: [PATCH 130/638] ALSA: oxygen: prevent muting of nonexistent AC97 controls The Xonar DX does not have CD Capture controls, so we have to check that a control actually exists before muting it. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/pci/oxygen/oxygen_mixer.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index 6facac5aed9..05eb8994c14 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -512,9 +512,12 @@ static int ac97_switch_get(struct snd_kcontrol *ctl, static void mute_ac97_ctl(struct oxygen *chip, unsigned int control) { - unsigned int priv_idx = chip->controls[control]->private_value & 0xff; + unsigned int priv_idx; u16 value; + if (!chip->controls[control]) + return; + priv_idx = chip->controls[control]->private_value & 0xff; value = oxygen_read_ac97(chip, 0, priv_idx); if (!(value & 0x8000)) { oxygen_write_ac97(chip, 0, priv_idx, value | 0x8000); From e784539fe81490a982a013621d39a60c4fce427e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 26 Aug 2008 13:32:57 +0300 Subject: [PATCH 131/638] ALSA: ASoC: Fix error paths in N810 machine driver init and release clocks at exit Thanks to Felipe Balbi by noticing that if clk_get to sys_clkout2_src fails, then n810_snd_device is never released. Add also sys_clkout2_src release into error path, error code return and release the clocks at exit. Signed-off-by: Jarkko Nikula Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/omap/n810.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 7694621ec40..87d0ed01f65 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -329,12 +329,14 @@ static int __init n810_soc_init(void) sys_clkout2_src = clk_get(dev, "sys_clkout2_src"); if (IS_ERR(sys_clkout2_src)) { dev_err(dev, "Could not get sys_clkout2_src clock\n"); - return -ENODEV; + err = PTR_ERR(sys_clkout2_src); + goto err2; } sys_clkout2 = clk_get(dev, "sys_clkout2"); if (IS_ERR(sys_clkout2)) { dev_err(dev, "Could not get sys_clkout2\n"); - goto err1; + err = PTR_ERR(sys_clkout2); + goto err3; } /* * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use @@ -343,7 +345,8 @@ static int __init n810_soc_init(void) func96m_clk = clk_get(dev, "func_96m_ck"); if (IS_ERR(func96m_clk)) { dev_err(dev, "Could not get func 96M clock\n"); - goto err2; + err = PTR_ERR(func96m_clk); + goto err4; } clk_set_parent(sys_clkout2_src, func96m_clk); clk_set_rate(sys_clkout2, 12000000); @@ -356,20 +359,25 @@ static int __init n810_soc_init(void) gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); return 0; -err2: +err4: clk_put(sys_clkout2); +err3: + clk_put(sys_clkout2_src); +err2: platform_device_del(n810_snd_device); err1: platform_device_put(n810_snd_device); return err; - } static void __exit n810_soc_exit(void) { gpio_free(N810_SPEAKER_AMP_GPIO); gpio_free(N810_HEADSET_AMP_GPIO); + clk_put(sys_clkout2_src); + clk_put(sys_clkout2); + clk_put(func96m_clk); platform_device_unregister(n810_snd_device); } From f8787fdcf6f46d6a65a42dbddb70cd7e4dc5b741 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 26 Aug 2008 13:30:03 +0100 Subject: [PATCH 132/638] [ARM] 5225/1: zaurus: Register I2C controller for audio codecs corgi, spitz and poodle have audio codecs on their primary I2C bus so need to call pxa_set_i2c_info() to set it up during init. Tested on spitz by Stanislav. Reported-by: Stanislav Brabec Signed-off-by: Mark Brown Acked-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi.c | 2 ++ arch/arm/mach-pxa/poodle.c | 2 ++ arch/arm/mach-pxa/spitz.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 123a950db46..e703a8d209e 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -532,6 +533,7 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &corgi_pcmcia_config; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 055ec63d768..3f5f484549b 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -387,6 +388,7 @@ static void __init poodle_init(void) pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); + pxa_set_i2c_info(NULL); platform_scoop_config = &poodle_pcmcia_config; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cd39005c98f..b569f3b4cf3 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -574,6 +575,7 @@ static void __init common_init(void) pxa_set_ficp_info(&spitz_ficp_platform_data); set_pxa_fb_parent(&spitzssp_device.dev); set_pxa_fb_info(&spitz_pxafb_info); + pxa_set_i2c_info(NULL); } #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) From 5770a3fb5f8544d40ae03b010318345cdd05d662 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 26 Aug 2008 15:29:22 +0100 Subject: [PATCH 133/638] Fix userspace export of Including in the user-visible part of this header has caused build regressions with headers from 2.6.27-rc. Move it down to the #ifdef __KERNEL__ part, which is the only place it's needed. Move some other kernel-only things down there too, while we're at it. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- include/linux/net.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/net.h b/include/linux/net.h index 4a9a30f2d68..6dc14a24004 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -18,16 +18,9 @@ #ifndef _LINUX_NET_H #define _LINUX_NET_H -#include #include -#include /* For O_CLOEXEC and O_NONBLOCK */ #include -struct poll_table_struct; -struct pipe_inode_info; -struct inode; -struct net; - #define NPROTO AF_MAX #define SYS_SOCKET 1 /* sys_socket(2) */ @@ -62,6 +55,13 @@ typedef enum { #ifdef __KERNEL__ #include #include +#include +#include /* For O_CLOEXEC and O_NONBLOCK */ + +struct poll_table_struct; +struct pipe_inode_info; +struct inode; +struct net; #define SOCK_ASYNC_NOSPACE 0 #define SOCK_ASYNC_WAITDATA 1 From e9775843ecb039318dbc9ded6da9c762bff28a0b Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 26 Aug 2008 18:22:50 +0000 Subject: [PATCH 134/638] [CIFS] Correct keys dependency for cifs kerberos support Must also depend on CIFS ... Signed-off-by: Steve French --- fs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/Kconfig b/fs/Kconfig index f0427105a61..3fab3901e0e 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1984,7 +1984,7 @@ config CIFS_EXPERIMENTAL config CIFS_UPCALL bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)" - depends on KEYS + depends on CIFS && KEYS help Enables an upcall mechanism for CIFS which accesses userspace helper utilities to provide SPNEGO packaged (RFC 4178) From 96c2a1137b9e00bcdbe3a95113ea8f42ca994f76 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 26 Aug 2008 18:32:28 +0000 Subject: [PATCH 135/638] [CIFS] Reorder cifs config item for better clarity Signed-off-by: Steve French --- fs/Kconfig | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index 3fab3901e0e..abccb5dab9a 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1930,6 +1930,16 @@ config CIFS_WEAK_PW_HASH If unsure, say N. +config CIFS_UPCALL + bool "Kerberos/SPNEGO advanced session setup" + depends on CIFS && KEYS + help + Enables an upcall mechanism for CIFS which accesses + userspace helper utilities to provide SPNEGO packaged (RFC 4178) + Kerberos tickets which are needed to mount to certain secure servers + (for which more secure Kerberos authentication is required). If + unsure, say N. + config CIFS_XATTR bool "CIFS extended attributes" depends on CIFS @@ -1982,16 +1992,6 @@ config CIFS_EXPERIMENTAL (which is disabled by default). See the file fs/cifs/README for more details. If unsure, say N. -config CIFS_UPCALL - bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)" - depends on CIFS && KEYS - help - Enables an upcall mechanism for CIFS which accesses - userspace helper utilities to provide SPNEGO packaged (RFC 4178) - Kerberos tickets which are needed to mount to certain secure servers - (for which more secure Kerberos authentication is required). If - unsure, say N. - config CIFS_DFS_UPCALL bool "DFS feature support (EXPERIMENTAL)" depends on CIFS_EXPERIMENTAL From b4253f8fc1293cdbfb6a474394e1a66febb70e3d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jun 2008 22:36:49 +0100 Subject: [PATCH 136/638] [WATCHDOG] Fix NULL usage in s3c2410_wdt driver. Fix comparison of a pointer to 0, instead of using NULL for a invalid pointer. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 22715e3be5e..27af55f193d 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -374,7 +374,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } wdt_base = ioremap(res->start, size); - if (wdt_base == 0) { + if (wdt_base == NULL) { dev_err(dev, "failed to ioremap() region\n"); ret = -EINVAL; goto err_req; From 9e3eaf149043f29cfcb77c2fa163dfa1d2ccbfab Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jun 2008 22:36:50 +0100 Subject: [PATCH 137/638] [WATCHDOG] Clean out header of s3c2410_wdt driver. Remove the changelog from the top of the driver, which is redundant as this information is more accurately represented from the revision control holding the file. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 27af55f193d..825dbd51a94 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -21,18 +21,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog: - * 05-Oct-2004 BJD Added semaphore init to stop crashes on open - * Fixed tmr_count / wdt_count confusion - * Added configurable debug - * - * 11-Jan-2005 BJD Fixed divide-by-2 in timeout code - * - * 25-Jan-2005 DA Added suspend/resume support - * Replaced reboot notifier with .shutdown method - * - * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA */ #include From 0e65fb2978467a3538af69858ae6bc13d332b9b2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 22 Jun 2008 22:36:51 +0100 Subject: [PATCH 138/638] [WATCHDOG] Fix s3c2410_wdt driver coding style issues Fixup coding style issues in the s3c2410_wdt driver. Signed-off-by: Ben Dooks Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 825dbd51a94..86d42801de4 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -353,7 +353,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) return -ENOENT; } - size = (res->end-res->start)+1; + size = (res->end - res->start) + 1; wdt_mem = request_mem_region(res->start, size, pdev->name); if (wdt_mem == NULL) { dev_err(dev, "failed to get memory region\n"); From eaa95eb6ea43e6de8bea702c13556de9a1a1195a Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 24 Jul 2008 12:22:05 +0200 Subject: [PATCH 139/638] [WATHDOG] delete unused driver mpc8xx_wdt.c The watchdog driver mpc8xx_wdt.c was a device interface to arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware is supported by mpc8xxx_wdt.c. Signed-off-by: Jochen Friedrich Signed-off-by: Wim Van Sebroeck Acked-by: Vitaly Bordug Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 4 - drivers/watchdog/Makefile | 1 - drivers/watchdog/mpc8xx_wdt.c | 170 ---------------------------------- 3 files changed, 175 deletions(-) delete mode 100644 drivers/watchdog/mpc8xx_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index db20542796b..a8e80f2eb8a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -692,10 +692,6 @@ config MPC5200_WDT tristate "MPC5200 Watchdog Timer" depends on PPC_MPC52xx -config 8xx_WDT - tristate "MPC8xx Watchdog Timer" - depends on 8xx - config 8xxx_WDT tristate "MPC8xxx Platform Watchdog Timer" depends on PPC_8xx || PPC_83xx || PPC_86xx diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index ca3dc043d78..1b5c0118cfe 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -104,7 +104,6 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o # PARISC Architecture # POWERPC Architecture -obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c deleted file mode 100644 index 1336425acf2..00000000000 --- a/drivers/watchdog/mpc8xx_wdt.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * mpc8xx_wdt.c - MPC8xx watchdog userspace interface - * - * Author: Florian Schirmer - * - * 2002 (c) Florian Schirmer This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static unsigned long wdt_opened; -static int wdt_status; -static spinlock_t wdt_lock; - -static void mpc8xx_wdt_handler_disable(void) -{ - volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; - - if (!m8xx_has_internal_rtc) - m8xx_wdt_stop_timer(); - else - out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE)); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n"); -} - -static void mpc8xx_wdt_handler_enable(void) -{ - volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; - - if (!m8xx_has_internal_rtc) - m8xx_wdt_install_timer(); - else - out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n"); -} - -static int mpc8xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &wdt_opened)) - return -EBUSY; - m8xx_wdt_reset(); - mpc8xx_wdt_handler_disable(); - return nonseekable_open(inode, file); -} - -static int mpc8xx_wdt_release(struct inode *inode, struct file *file) -{ - m8xx_wdt_reset(); -#if !defined(CONFIG_WATCHDOG_NOWAYOUT) - mpc8xx_wdt_handler_enable(); -#endif - clear_bit(0, &wdt_opened); - return 0; -} - -static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (len) { - spin_lock(&wdt_lock); - m8xx_wdt_reset(); - spin_unlock(&wdt_lock); - } - return len; -} - -static long mpc8xx_wdt_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - int timeout; - static struct watchdog_info info = { - .options = WDIOF_KEEPALIVEPING, - .firmware_version = 0, - .identity = "MPC8xx watchdog", - }; - - switch (cmd) { - case WDIOC_GETSUPPORT: - if (copy_to_user((void *)arg, &info, sizeof(info))) - return -EFAULT; - break; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - if (put_user(wdt_status, (int *)arg)) - return -EFAULT; - wdt_status &= ~WDIOF_KEEPALIVEPING; - break; - - case WDIOC_GETTEMP: - return -EOPNOTSUPP; - - case WDIOC_SETOPTIONS: - return -EOPNOTSUPP; - - case WDIOC_KEEPALIVE: - spin_lock(&wdt_lock); - m8xx_wdt_reset(); - wdt_status |= WDIOF_KEEPALIVEPING; - spin_unlock(&wdt_lock); - break; - - case WDIOC_SETTIMEOUT: - return -EOPNOTSUPP; - - case WDIOC_GETTIMEOUT: - spin_lock(&wdt_lock); - timeout = m8xx_wdt_get_timeout(); - spin_unlock(&wdt_lock); - if (put_user(timeout, (int *)arg)) - return -EFAULT; - break; - - default: - return -ENOTTY; - } - - return 0; -} - -static const struct file_operations mpc8xx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = mpc8xx_wdt_write, - .unlocked_ioctl = mpc8xx_wdt_ioctl, - .open = mpc8xx_wdt_open, - .release = mpc8xx_wdt_release, -}; - -static struct miscdevice mpc8xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &mpc8xx_wdt_fops, -}; - -static int __init mpc8xx_wdt_init(void) -{ - spin_lock_init(&wdt_lock); - return misc_register(&mpc8xx_wdt_miscdev); -} - -static void __exit mpc8xx_wdt_exit(void) -{ - misc_deregister(&mpc8xx_wdt_miscdev); - - m8xx_wdt_reset(); - mpc8xx_wdt_handler_enable(); -} - -module_init(mpc8xx_wdt_init); -module_exit(mpc8xx_wdt_exit); - -MODULE_AUTHOR("Florian Schirmer "); -MODULE_DESCRIPTION("MPC8xx watchdog driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); From b3e8f2c13ae964a8889fe96a2f3f7fd7e0cfae76 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 25 Feb 2008 12:59:26 +0100 Subject: [PATCH 140/638] [WATCHDOG] Add support for the built-int RDC R-321x SoC watchdog This patch adds support for the built-in RDC R-321x SoC watchdog. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 10 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/rdc321x_wdt.c | 285 +++++++++++++++++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 drivers/watchdog/rdc321x_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index a8e80f2eb8a..a1f47c7d7cd 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -465,6 +465,16 @@ config PC87413_WDT Most people will say N. +config RDC321X_WDT + tristate "RDC R-321x SoC watchdog" + depends on X86_RDC321X + help + This is the driver for the built in hardware watchdog + in the RDC R-321x SoC. + + To compile this driver as a module, choose M here: the + module will be called rdc321x_wdt. + config 60XX_WDT tristate "SBC-60XX Watchdog Timer" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 1b5c0118cfe..a88be6fdadf 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o +obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c new file mode 100644 index 00000000000..9108efa73e7 --- /dev/null +++ b/drivers/watchdog/rdc321x_wdt.c @@ -0,0 +1,285 @@ +/* + * RDC321x watchdog driver + * + * Copyright (C) 2007 Florian Fainelli + * + * This driver is highly inspired from the cpu5_wdt driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RDC_WDT_MASK 0x80000000 /* Mask */ +#define RDC_WDT_EN 0x00800000 /* Enable bit */ +#define RDC_WDT_WTI 0x00200000 /* Generate CPU reset/NMI/WDT on timeout */ +#define RDC_WDT_RST 0x00100000 /* Reset bit */ +#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */ +#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */ +#define RDC_WDT_CNT 0x00000001 /* WDT count */ + +#define RDC_CLS_TMR 0x80003844 /* Clear timer */ + +#define RDC_WDT_INTERVAL (HZ/10+1) + +static int ticks = 1000; + +/* some device data */ + +static struct { + struct completion stop; + int running; + struct timer_list timer; + int queue; + int default_ticks; + unsigned long inuse; + spinlock_t lock; +} rdc321x_wdt_device; + +/* generic helper functions */ + +static void rdc321x_wdt_trigger(unsigned long unused) +{ + unsigned long flags; + + if (rdc321x_wdt_device.running) + ticks--; + + /* keep watchdog alive */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA), + RDC3210_CFGREG_DATA); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + + /* requeue?? */ + if (rdc321x_wdt_device.queue && ticks) + mod_timer(&rdc321x_wdt_device.timer, + jiffies + RDC_WDT_INTERVAL); + else { + /* ticks doesn't matter anyway */ + complete(&rdc321x_wdt_device.stop); + } + +} + +static void rdc321x_wdt_reset(void) +{ + ticks = rdc321x_wdt_device.default_ticks; +} + +static void rdc321x_wdt_start(void) +{ + unsigned long flags; + + if (!rdc321x_wdt_device.queue) { + rdc321x_wdt_device.queue = 1; + + /* Clear the timer */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR); + + /* Enable watchdog and set the timeout to 81.92 us */ + outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + + mod_timer(&rdc321x_wdt_device.timer, + jiffies + RDC_WDT_INTERVAL); + } + + /* if process dies, counter is not decremented */ + rdc321x_wdt_device.running++; +} + +static int rdc321x_wdt_stop(void) +{ + if (rdc321x_wdt_device.running) + rdc321x_wdt_device.running = 0; + + ticks = rdc321x_wdt_device.default_ticks; + + return -EIO; +} + +/* filesystem operations */ +static int rdc321x_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &rdc321x_wdt_device.inuse)) + return -EBUSY; + + return nonseekable_open(inode, file); +} + +static int rdc321x_wdt_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &rdc321x_wdt_device.inuse); + return 0; +} + +static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + unsigned int value; + static struct watchdog_info ident = { + .options = WDIOF_CARDRESET, + .identity = "RDC321x WDT", + }; + unsigned long flags; + + switch (cmd) { + case WDIOC_KEEPALIVE: + rdc321x_wdt_reset(); + break; + case WDIOC_GETSTATUS: + /* Read the value from the DATA register */ + spin_lock_irqsave(&rdc321x_wdt_device.lock, flags); + value = inl(RDC3210_CFGREG_DATA); + spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags); + if (copy_to_user(argp, &value, sizeof(int))) + return -EFAULT; + break; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (copy_from_user(&value, argp, sizeof(int))) + return -EFAULT; + switch (value) { + case WDIOS_ENABLECARD: + rdc321x_wdt_start(); + break; + case WDIOS_DISABLECARD: + return rdc321x_wdt_stop(); + default: + return -EINVAL; + } + break; + default: + return -ENOTTY; + } + return 0; +} + +static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (!count) + return -EIO; + + rdc321x_wdt_reset(); + + return count; +} + +static const struct file_operations rdc321x_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = rdc321x_wdt_ioctl, + .open = rdc321x_wdt_open, + .write = rdc321x_wdt_write, + .release = rdc321x_wdt_release, +}; + +static struct miscdevice rdc321x_wdt_misc = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &rdc321x_wdt_fops, +}; + +static int __devinit rdc321x_wdt_probe(struct platform_device *pdev) +{ + int err; + + err = misc_register(&rdc321x_wdt_misc); + if (err < 0) { + printk(KERN_ERR PFX "watchdog misc_register failed\n"); + return err; + } + + spin_lock_init(&rdc321x_wdt_device.lock); + + /* Reset the watchdog */ + outl(RDC_WDT_RST, RDC3210_CFGREG_DATA); + + init_completion(&rdc321x_wdt_device.stop); + rdc321x_wdt_device.queue = 0; + + clear_bit(0, &rdc321x_wdt_device.inuse); + + setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0); + + rdc321x_wdt_device.default_ticks = ticks; + + printk(KERN_INFO PFX "watchdog init success\n"); + + return 0; +} + +static int rdc321x_wdt_remove(struct platform_device *pdev) +{ + if (rdc321x_wdt_device.queue) { + rdc321x_wdt_device.queue = 0; + wait_for_completion(&rdc321x_wdt_device.stop); + } + + misc_deregister(&rdc321x_wdt_misc); + + return 0; +} + +static struct platform_driver rdc321x_wdt_driver = { + .probe = rdc321x_wdt_probe, + .remove = rdc321x_wdt_remove, + .driver = { + .owner = THIS_MODULE, + .name = "rdc321x-wdt", + }, +}; + +static int __init rdc321x_wdt_init(void) +{ + return platform_driver_register(&rdc321x_wdt_driver); +} + +static void __exit rdc321x_wdt_exit(void) +{ + platform_driver_unregister(&rdc321x_wdt_driver); +} + +module_init(rdc321x_wdt_init); +module_exit(rdc321x_wdt_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("RDC321x watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); From 03ec58568a3c66cac4b23ff74db95c966a1521de Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 25 Feb 2008 13:11:31 +0100 Subject: [PATCH 141/638] [WATCHDOG] Add support for the IDT RC32434 watchdog Add driver for the IDT RC32434 SoC built-in watchdog. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 10 + drivers/watchdog/Makefile | 1 + drivers/watchdog/rc32434_wdt.c | 344 +++++++++++++++++++++++++++++++++ 3 files changed, 355 insertions(+) create mode 100644 drivers/watchdog/rc32434_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index a1f47c7d7cd..c5103671670 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -643,6 +643,16 @@ config SBC_EPX_C3_WATCHDOG # MIPS Architecture +config RC32434_WDT + tristate "IDT RC32434 SoC Watchdog Timer" + depends on MIKROTIK_RB532 + help + Hardware driver for the IDT RC32434 SoC built-in + watchdog timer. + + To compile this driver as a module, choose M here: the + module will be called rc32434_wdt. + config INDYDOG tristate "Indy/I2 Hardware Watchdog" depends on SGI_HAS_INDYDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index a88be6fdadf..e0ef123fbde 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o # M68KNOMMU Architecture # MIPS Architecture +obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c new file mode 100644 index 00000000000..6756bcb009e --- /dev/null +++ b/drivers/watchdog/rc32434_wdt.c @@ -0,0 +1,344 @@ +/* + * IDT Interprise 79RC32434 watchdog driver + * + * Copyright (C) 2006, Ondrej Zajicek + * Copyright (C) 2008, Florian Fainelli + * + * based on + * SoftDog 0.05: A Software Watchdog Device + * + * (c) Copyright 1996 Alan Cox , All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define MAX_TIMEOUT 20 +#define RC32434_WDT_INTERVAL (15 * HZ) + +#define VERSION "0.2" + +static struct { + struct completion stop; + int running; + struct timer_list timer; + int queue; + int default_ticks; + unsigned long inuse; +} rc32434_wdt_device; + +static struct integ __iomem *wdt_reg; +static int ticks = 100 * HZ; + +static int expect_close; +static int timeout; + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +static void rc32434_wdt_start(void) +{ + u32 val; + + if (!rc32434_wdt_device.inuse) { + writel(0, &wdt_reg->wtcount); + + val = RC32434_ERR_WRE; + writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs); + + val = RC32434_WTC_EN; + writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc); + } + rc32434_wdt_device.running++; +} + +static void rc32434_wdt_stop(void) +{ + u32 val; + + if (rc32434_wdt_device.running) { + + val = ~RC32434_WTC_EN; + writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc); + + val = ~RC32434_ERR_WRE; + writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs); + + rc32434_wdt_device.running = 0; + } +} + +static void rc32434_wdt_set(int new_timeout) +{ + u32 cmp = new_timeout * HZ; + u32 state, val; + + timeout = new_timeout; + /* + * store and disable WTC + */ + state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN); + val = ~RC32434_WTC_EN; + writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc); + + writel(0, &wdt_reg->wtcount); + writel(cmp, &wdt_reg->wtcompare); + + /* + * restore WTC + */ + + writel(readl(&wdt_reg->wtc) | state, &wdt_reg); +} + +static void rc32434_wdt_reset(void) +{ + ticks = rc32434_wdt_device.default_ticks; +} + +static void rc32434_wdt_update(unsigned long unused) +{ + if (rc32434_wdt_device.running) + ticks--; + + writel(0, &wdt_reg->wtcount); + + if (rc32434_wdt_device.queue && ticks) + mod_timer(&rc32434_wdt_device.timer, + jiffies + RC32434_WDT_INTERVAL); + else + complete(&rc32434_wdt_device.stop); +} + +static int rc32434_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &rc32434_wdt_device.inuse)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + return nonseekable_open(inode, file); +} + +static int rc32434_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close && nowayout == 0) { + rc32434_wdt_stop(); + printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n"); + module_put(THIS_MODULE); + } else + printk(KERN_CRIT KBUILD_MODNAME + ": device closed unexpectedly. WDT will not stop !\n"); + + clear_bit(0, &rc32434_wdt_device.inuse); + return 0; +} + +static ssize_t rc32434_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + /* In case it was set long ago */ + expect_close = 0; + + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data + i)) + return -EFAULT; + if (c == 'V') + expect_close = 1; + } + } + rc32434_wdt_update(0); + return len; + } + return 0; +} + +static int rc32434_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int new_timeout; + unsigned int value; + static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .identity = "RC32434_WDT Watchdog", + }; + switch (cmd) { + case WDIOC_KEEPALIVE: + rc32434_wdt_reset(); + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + value = readl(&wdt_reg->wtcount); + if (copy_to_user(argp, &value, sizeof(int))) + return -EFAULT; + break; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (copy_from_user(&value, argp, sizeof(int))) + return -EFAULT; + switch (value) { + case WDIOS_ENABLECARD: + rc32434_wdt_start(); + break; + case WDIOS_DISABLECARD: + rc32434_wdt_stop(); + default: + return -EINVAL; + } + break; + case WDIOC_SETTIMEOUT: + if (copy_from_user(&new_timeout, argp, sizeof(int))) + return -EFAULT; + if (new_timeout < 1) + return -EINVAL; + if (new_timeout > MAX_TIMEOUT) + return -EINVAL; + rc32434_wdt_set(new_timeout); + case WDIOC_GETTIMEOUT: + return copy_to_user(argp, &timeout, sizeof(int)); + default: + return -ENOTTY; + } + + return 0; +} + +static struct file_operations rc32434_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = rc32434_wdt_write, + .ioctl = rc32434_wdt_ioctl, + .open = rc32434_wdt_open, + .release = rc32434_wdt_release, +}; + +static struct miscdevice rc32434_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &rc32434_wdt_fops, +}; + +static char banner[] = KERN_INFO KBUILD_MODNAME + ": Watchdog Timer version " VERSION ", timer margin: %d sec\n"; + +static int rc32434_wdt_probe(struct platform_device *pdev) +{ + int ret; + struct resource *r; + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res"); + if (!r) { + printk(KERN_ERR KBUILD_MODNAME + "failed to retrieve resources\n"); + return -ENODEV; + } + + wdt_reg = ioremap_nocache(r->start, r->end - r->start); + if (!wdt_reg) { + printk(KERN_ERR KBUILD_MODNAME + "failed to remap I/O resources\n"); + return -ENXIO; + } + + ret = misc_register(&rc32434_wdt_miscdev); + + if (ret < 0) { + printk(KERN_ERR KBUILD_MODNAME + "failed to register watchdog device\n"); + goto unmap; + } + + init_completion(&rc32434_wdt_device.stop); + rc32434_wdt_device.queue = 0; + + clear_bit(0, &rc32434_wdt_device.inuse); + + setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L); + + rc32434_wdt_device.default_ticks = ticks; + + rc32434_wdt_start(); + + printk(banner, timeout); + + return 0; + +unmap: + iounmap(wdt_reg); + return ret; +} + +static int rc32434_wdt_remove(struct platform_device *pdev) +{ + if (rc32434_wdt_device.queue) { + rc32434_wdt_device.queue = 0; + wait_for_completion(&rc32434_wdt_device.stop); + } + misc_deregister(&rc32434_wdt_miscdev); + + iounmap(wdt_reg); + + return 0; +} + +static struct platform_driver rc32434_wdt = { + .probe = rc32434_wdt_probe, + .remove = rc32434_wdt_remove, + .driver = { + .name = "rc32434_wdt", + } +}; + +static int __init rc32434_wdt_init(void) +{ + return platform_driver_register(&rc32434_wdt); +} + +static void __exit rc32434_wdt_exit(void) +{ + platform_driver_unregister(&rc32434_wdt); +} + +module_init(rc32434_wdt_init); +module_exit(rc32434_wdt_exit); + +MODULE_AUTHOR("Ondrej Zajicek ," + "Florian Fainelli "); +MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); From ab4ba3cdeb59e85552422680b5bac99e28740330 Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Tue, 15 Jul 2008 19:40:41 +0000 Subject: [PATCH 142/638] [WATCHDOG] hpwdt.c kdebug support add kdebug support for the hpwdt.c driver. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 93 +++++++++++++++++++++------------------- 1 file changed, 50 insertions(+), 43 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index d039d5f2fd1..a3765e0be4a 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -116,6 +116,7 @@ static unsigned int reload; /* the computed soft_margin */ static int nowayout = WATCHDOG_NOWAYOUT; static char expect_release; static unsigned long hpwdt_is_open; +static unsigned int allow_kdump; static void __iomem *pci_mem_addr; /* the PCI-memory address */ static unsigned long __iomem *hpwdt_timer_reg; @@ -221,19 +222,19 @@ static int __devinit cru_detect(unsigned long map_entry, if (cmn_regs.u1.ral != 0) { printk(KERN_WARNING - "hpwdt: Call succeeded but with an error: 0x%x\n", - cmn_regs.u1.ral); + "hpwdt: Call succeeded but with an error: 0x%x\n", + cmn_regs.u1.ral); } else { physical_bios_base = cmn_regs.u2.rebx; physical_bios_offset = cmn_regs.u4.redx; cru_length = cmn_regs.u3.recx; cru_physical_address = - physical_bios_base + physical_bios_offset; + physical_bios_base + physical_bios_offset; /* If the values look OK, then map it in. */ if ((physical_bios_base + physical_bios_offset)) { cru_rom_addr = - ioremap(cru_physical_address, cru_length); + ioremap(cru_physical_address, cru_length); if (cru_rom_addr) retval = 0; } @@ -356,7 +357,6 @@ asm(".text \n\t" "call *%r12 \n\t" "pushfq \n\t" "popq %r12 \n\t" - "popfq \n\t" "movl %eax, (%r9) \n\t" "movl %ebx, 4(%r9) \n\t" "movl %ecx, 8(%r9) \n\t" @@ -390,10 +390,10 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) smbios_cru64_ptr = (struct smbios_cru64_info *) dm; if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) { cru_physical_address = - smbios_cru64_ptr->physical_address + - smbios_cru64_ptr->double_offset; + smbios_cru64_ptr->physical_address + + smbios_cru64_ptr->double_offset; cru_rom_addr = ioremap(cru_physical_address, - smbios_cru64_ptr->double_length); + smbios_cru64_ptr->double_length); } } } @@ -405,41 +405,13 @@ static int __devinit detect_cru_service(void) dmi_walk(dmi_find_cru); /* if cru_rom_addr has been set then we found a CRU service */ - return ((cru_rom_addr != NULL) ? 0: -ENODEV); + return ((cru_rom_addr != NULL) ? 0 : -ENODEV); } /* ------------------------------------------------------------------------- */ #endif -/* - * NMI Handler - */ -static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, - void *data) -{ - unsigned long rom_pl; - static int die_nmi_called; - - if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) - return NOTIFY_OK; - - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral == 0) { - printk(KERN_WARNING "hpwdt: An NMI occurred, " - "but unable to determine source.\n"); - } else { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); - } - - return NOTIFY_STOP; -} - /* * Watchdog operations */ @@ -483,6 +455,36 @@ static int hpwdt_change_timer(int new_margin) return 0; } +/* + * NMI Handler + */ +static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, + void *data) +{ + unsigned long rom_pl; + static int die_nmi_called; + + if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) + return NOTIFY_OK; + + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral == 0) { + printk(KERN_WARNING "hpwdt: An NMI occurred, " + "but unable to determine source.\n"); + } else { + if (allow_kdump) + hpwdt_stop(); + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); + } + + return NOTIFY_STOP; +} + /* * /dev/watchdog handling */ @@ -625,17 +627,18 @@ static struct notifier_block die_notifier = { */ static int __devinit hpwdt_init_one(struct pci_dev *dev, - const struct pci_device_id *ent) + const struct pci_device_id *ent) { int retval; /* * First let's find out if we are on an iLO2 server. We will * not run on a legacy ASM box. + * So we only support the G5 ProLiant servers and higher. */ if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) { dev_warn(&dev->dev, - "This server does not have an iLO2 ASIC.\n"); + "This server does not have an iLO2 ASIC.\n"); return -ENODEV; } @@ -669,7 +672,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev, retval = detect_cru_service(); if (retval < 0) { dev_warn(&dev->dev, - "Unable to detect the %d Bit CRU Service.\n", + "Unable to detect the %d Bit CRU Service.\n", HPWDT_ARCH); goto error_get_cru; } @@ -684,7 +687,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev, retval = register_die_notifier(&die_notifier); if (retval != 0) { dev_warn(&dev->dev, - "Unable to register a die notifier (err=%d).\n", + "Unable to register a die notifier (err=%d).\n", retval); goto error_die_notifier; } @@ -699,8 +702,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev, printk(KERN_INFO "hp Watchdog Timer Driver: 1.00" - ", timer margin: %d seconds( nowayout=%d).\n", - soft_margin, nowayout); + ", timer margin: %d seconds (nowayout=%d)" + ", allow kernel dump: %s (default = 0/OFF).\n", + soft_margin, nowayout, (allow_kdump == 0) ? "OFF" : "ON"); return 0; @@ -755,6 +759,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(soft_margin, int, 0); MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); +module_param(allow_kdump, int, 0); +MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs"); + module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); From 593fc178f634b742d03660a35fcb5694c0751718 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 20 Aug 2008 16:38:36 -0700 Subject: [PATCH 143/638] [WATCHDOG] mpc8xxx_wdt: fix modular build Fix the following build error when mpc8xxx_wdt is selected to build as a module: drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of '__inittest' drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of '__inittest' was here drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of 'init_module' drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of 'init_module' was here Reported-by: Dave Jones Signed-off-by: Anton Vorontsov Signed-off-by: Wim Van Sebroeck Cc: Adrian Bunk Signed-off-by: Andrew Morton --- drivers/watchdog/mpc8xxx_wdt.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index f2094960e66..38c588ee694 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -48,6 +48,7 @@ struct mpc8xxx_wdt_type { }; static struct mpc8xxx_wdt __iomem *wd_base; +static int mpc8xxx_wdt_init_late(void); static u16 timeout = 0xffff; module_param(timeout, ushort, 0); @@ -213,6 +214,12 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, else timeout_sec = timeout / freq; +#ifdef MODULE + ret = mpc8xxx_wdt_init_late(); + if (ret) + goto err_unmap; +#endif + pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d " "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, timeout_sec); @@ -280,7 +287,7 @@ static struct of_platform_driver mpc8xxx_wdt_driver = { * very early to start pinging the watchdog (misc devices are not yet * available), and later module_init() just registers the misc device. */ -static int __init mpc8xxx_wdt_init_late(void) +static int mpc8xxx_wdt_init_late(void) { int ret; @@ -295,7 +302,9 @@ static int __init mpc8xxx_wdt_init_late(void) } return 0; } +#ifndef MODULE module_init(mpc8xxx_wdt_init_late); +#endif static int __init mpc8xxx_wdt_init(void) { From 95f62bdc550eecfb9c7396b0f7cb5ebd349d0835 Mon Sep 17 00:00:00 2001 From: Ilpo Jarvinen Date: Tue, 19 Aug 2008 09:01:14 +0300 Subject: [PATCH 144/638] [WATCHDOG] at91rm9200_wdt.c: fix misleading indentation Signed-off-by: Ilpo Jarvinen Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/at91rm9200_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index d061f0ad2d2..993e5f52afe 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -241,7 +241,7 @@ static int at91wdt_resume(struct platform_device *pdev) { if (at91wdt_busy) at91_wdt_start(); - return 0; + return 0; } #else From 3ccd3ec6d4a7750c49c4d2bbcc1d0e82cd4c8a7f Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 17 Aug 2008 07:51:12 +0800 Subject: [PATCH 145/638] [WATCHDOG] removed unused #include The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/watchdog/pc87413_wdt.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pc87413_wdt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index e91ada72da1..484c215e9f3 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include From ec8292347b5052633b46b562598b0e3ee7875ce7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:02 +0100 Subject: [PATCH 146/638] [ARM] S3C24XX: Fix nor-simtec driver sparse errors Fix the following sparse errors in arch/arm/mach-s3c2410/nor-simtec.c: 53:27: warning: symbol 'simtec_nor_pdata' was not declared. Should it be static? 77:13: warning: symbol 'nor_simtec_init' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/nor-simtec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c index b2ae237042a..598d130633d 100644 --- a/arch/arm/mach-s3c2410/nor-simtec.c +++ b/arch/arm/mach-s3c2410/nor-simtec.c @@ -30,6 +30,7 @@ #include #include +#include "nor-simtec.h" static void simtec_nor_vpp(struct map_info *map, int vpp) { @@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp) local_irq_restore(flags); } -struct physmap_flash_data simtec_nor_pdata = { +static struct physmap_flash_data simtec_nor_pdata = { .width = 2, .set_vpp = simtec_nor_vpp, .nr_parts = 0, From f4cb1a89640ee28b66081061e55871f5e0ac685f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:03 +0100 Subject: [PATCH 147/638] [ARM] S3C24XX: Fix sparse warnings in arch/arm/plat-s3c24xx/gpiolib.c Fix the following problems spotted by sparse: warning: symbol 's3c24xx_gpiolib_input' was not declared. Should it be static? warning: symbol 's3c24xx_gpiolib_output' was not declared. Should it be static? warning: symbol 's3c24xx_gpiolib_set' was not declared. Should it be static? warning: symbol 's3c24xx_gpiolib_get' was not declared. Should it be static? warning: symbol 'gpios' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpiolib.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 849f8469714..3caec6bad3e 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc) * drivers themsevles. */ -int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) +static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); void __iomem *base = ourchip->base; @@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) return 0; } -int s3c24xx_gpiolib_output(struct gpio_chip *chip, +static int s3c24xx_gpiolib_output(struct gpio_chip *chip, unsigned offset, int value) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); @@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip, return 0; } -void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value) +static void s3c24xx_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); void __iomem *base = ourchip->base; @@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value) local_irq_restore(flags); } -int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset) +static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset) { struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); unsigned long val; @@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, return 0; } - -struct s3c24xx_gpio_chip gpios[] = { +static struct s3c24xx_gpio_chip gpios[] = { [0] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), .chip = { From 1442e662d8e159a3b67280d284c7b91f9fb31ba4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:04 +0100 Subject: [PATCH 148/638] [ARM] S3C24XX: Fix spare errors in pwm-clock driver Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm-clock.c: warning: symbol 'clk_timer_scaler' was not declared. Should it be static? warning: symbol 'clk_timer_tclk' was not declared. Should it be static? warning: symbol 'clk_timer_tdiv' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/pwm-clock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index ccfdc9d7ae4..306cc9c6f9e 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk) /* TODO - add set rate calls. */ -struct clk clk_timer_scaler[] = { +static struct clk clk_timer_scaler[] = { [0] = { .name = "pwm-scaler0", .id = -1, @@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = { }, }; -struct clk clk_timer_tclk[] = { +static struct clk clk_timer_tclk[] = { [0] = { .name = "pwm-tclk0", .id = -1, @@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate) return 0; } -struct pwm_tdiv_clk clk_timer_tdiv[] = { +static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { .name = "pwm-tdiv", From 103895925fbee5bd612ce2217f619df717aa1bda Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:05 +0100 Subject: [PATCH 149/638] [ARM] S3C24XX: Fix sparse warnings in pwm.c Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm.c: warning: symbol 's3c_device_timer' was not declared. Should it be static? warning: symbol 'pwm_calc_tin' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/pwm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 18c4bdc49a0..3b6861936dd 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -19,6 +19,7 @@ #include #include +#include #include struct pwm_device { @@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm) EXPORT_SYMBOL(pwm_disable); -unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) +static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq) { unsigned long tin_parent_rate; unsigned int div; From 66592eee16eaede05734ecc6fef797dafd2c6a12 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:06 +0100 Subject: [PATCH 150/638] [ARM] S3C24XX: pwm.c: stop debugging output Move debugging output to dev_dbg() instead of dev_info(). Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/pwm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index 3b6861936dd..7a92c938542 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -39,7 +39,7 @@ struct pwm_device { unsigned char pwm_id; }; -#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg) +#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg) static struct clk *clk_scaler[2]; From df9f17e20e3180572fe26f60ec4e5ba7db0377a7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 26 Aug 2008 22:54:07 +0100 Subject: [PATCH 151/638] [ARM] JIVE: Fix the spi bus numbering The first spi bus is registered with number 0, but the board data says that the device on it is registered on bus 1. Move the spi bus to bus 1 to keep the compatibility with the original board-support patches. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/mach-jive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 4c061d29463..ad980a1690c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -395,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) } static struct s3c2410_spigpio_info jive_lcd_spi = { - .bus_num = 0, + .bus_num = 1, .pin_clk = S3C2410_GPG8, .pin_mosi = S3C2410_GPB8, .chip_select = jive_lcd_spi_chipselect, From 78af47353065ea776d537f6e8b32c7c15b6ea169 Mon Sep 17 00:00:00 2001 From: Wei Shuai Date: Tue, 26 Aug 2008 22:54:08 +0100 Subject: [PATCH 152/638] [ARM] S3C2443: Fix the S3C2443 clock register definitions Fix the S3C2443 clock register definitions for selecting the EPLL reference clock described by S3C2443_CLKSRC_EPLLREF. Signed-off-by: Wei Shuai [ben-linux@fluff.org: minor description fixes] Signed-off-by: Ben Dooks --- .../arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 7dd458363a5..6026d091a2f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -48,11 +48,11 @@ #define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14) #define S3C2443_CLKSRC_I2S_MASK (3<<14) -#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8) -#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8) -#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8) -#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8) +#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<7) +#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<7) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<7) +#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<7) +#define S3C2443_CLKSRC_EPLLREF_MASK (3<<7) #define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6) #define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4) From 3c34a5d821b825b720189e87561ba18500cf8026 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 18 Aug 2008 15:40:02 -0400 Subject: [PATCH 153/638] atmel: return ENOENT on request_firmware failure Return errors from request_firmware() (like other drivers that do firmware load on device open) and make up plausible codes for other error conditions. Gives userspace tools like NetworkManager a clue that firmware may be missing when the result of setting IFF_UP is ENOENT. Signed-off-by: Dan Williams v2: fix reversed check of atmel_wakeup_firmware() in probe_atmel_card() Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 41 +++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index bd35bb0a148..f23bcd07dee 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1304,7 +1304,7 @@ EXPORT_SYMBOL(atmel_open); int atmel_open(struct net_device *dev) { struct atmel_private *priv = netdev_priv(dev); - int i, channel; + int i, channel, err; /* any scheduled timer is no longer needed and might screw things up.. */ del_timer_sync(&priv->management_timer); @@ -1328,8 +1328,9 @@ int atmel_open(struct net_device *dev) priv->site_survey_state = SITE_SURVEY_IDLE; priv->station_is_associated = 0; - if (!reset_atmel_card(dev)) - return -EAGAIN; + err = reset_atmel_card(dev); + if (err) + return err; if (priv->config_reg_domain) { priv->reg_domain = priv->config_reg_domain; @@ -3580,12 +3581,12 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) if (i == 0) { printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name); - return 0; + return -EIO; } if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) { printk(KERN_ALERT "%s: card missing.\n", priv->dev->name); - return 0; + return -ENODEV; } /* now check for completion of MAC initialization through @@ -3609,19 +3610,19 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) if (i == 0) { printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name); - return 0; + return -EIO; } /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */ if ((mr3 & MAC_INIT_COMPLETE) && !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) { printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name); - return 0; + return -EIO; } if ((mr1 & MAC_INIT_COMPLETE) && !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) { printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name); - return 0; + return -EIO; } atmel_copy_to_host(priv->dev, (unsigned char *)iface, @@ -3642,7 +3643,7 @@ static int atmel_wakeup_firmware(struct atmel_private *priv) iface->func_ctrl = le16_to_cpu(iface->func_ctrl); iface->mac_status = le16_to_cpu(iface->mac_status); - return 1; + return 0; } /* determine type of memory and MAC address */ @@ -3693,7 +3694,7 @@ static int probe_atmel_card(struct net_device *dev) /* Standard firmware in flash, boot it up and ask for the Mac Address */ priv->card_type = CARD_TYPE_SPI_FLASH; - if (atmel_wakeup_firmware(priv)) { + if (atmel_wakeup_firmware(priv) == 0) { atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6); /* got address, now squash it again until the network @@ -3835,6 +3836,7 @@ static int reset_atmel_card(struct net_device *dev) struct atmel_private *priv = netdev_priv(dev); u8 configuration; int old_state = priv->station_state; + int err = 0; /* data to add to the firmware names, in priority order this implemenents firmware versioning */ @@ -3868,11 +3870,12 @@ static int reset_atmel_card(struct net_device *dev) dev->name); strcpy(priv->firmware_id, "atmel_at76c502.bin"); } - if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) { + err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev); + if (err != 0) { printk(KERN_ALERT "%s: firmware %s is missing, cannot continue.\n", dev->name, priv->firmware_id); - return 0; + return err; } } else { int fw_index = 0; @@ -3901,7 +3904,7 @@ static int reset_atmel_card(struct net_device *dev) "%s: firmware %s is missing, cannot start.\n", dev->name, priv->firmware_id); priv->firmware_id[0] = '\0'; - return 0; + return -ENOENT; } } @@ -3926,8 +3929,9 @@ static int reset_atmel_card(struct net_device *dev) release_firmware(fw_entry); } - if (!atmel_wakeup_firmware(priv)) - return 0; + err = atmel_wakeup_firmware(priv); + if (err != 0) + return err; /* Check the version and set the correct flag for wpa stuff, old and new firmware is incompatible. @@ -3968,10 +3972,9 @@ static int reset_atmel_card(struct net_device *dev) if (!priv->radio_on_broken) { if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) == CMD_STATUS_REJECTED_RADIO_OFF) { - printk(KERN_INFO - "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n", + printk(KERN_INFO "%s: cannot turn the radio on.\n", dev->name); - return 0; + return -EIO; } } @@ -4006,7 +4009,7 @@ static int reset_atmel_card(struct net_device *dev) wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); } - return 1; + return 0; } static void atmel_send_command(struct atmel_private *priv, int command, From d0c2912fe8df81a8b723fb6ec4d4cdf523cbaff7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 18 Aug 2008 15:32:41 -0400 Subject: [PATCH 154/638] atmel: try open system authentication too When the AP rejects a Shared Key authentication request, try Open System auth too. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index f23bcd07dee..bd65c485098 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -3062,12 +3062,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) } if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) { - /* Do opensystem first, then try sharedkey */ + /* Flip back and forth between WEP auth modes until the max + * authentication tries has been exceeded. + */ if (system == WLAN_AUTH_OPEN) { priv->CurrentAuthentTransactionSeqNum = 0x001; priv->exclude_unencrypted = 1; send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0); return; + } else if ( system == WLAN_AUTH_SHARED_KEY + && priv->wep_is_on) { + priv->CurrentAuthentTransactionSeqNum = 0x001; + priv->exclude_unencrypted = 0; + send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0); + return; } else if (priv->connect_to_any_BSS) { int bss_index; From 004829730cb1b03abe7555e1c1faadec62cbcf6f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 18 Aug 2008 21:45:27 +0200 Subject: [PATCH 155/638] Ath5k: lock beacons Beacons setup and config was racy with beacon send. Ensure that ISR and reset functions see consistent state of bbuf. Use also dev_kfree_skb_any in ath5k_txbuf_free since we call it from atomic now. Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 15 ++++++++++++--- drivers/net/wireless/ath5k/base.h | 1 + 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index b20a45aa868..7bc012fca05 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -251,7 +251,7 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc, return; pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(bf->skb); + dev_kfree_skb_any(bf->skb); bf->skb = NULL; } @@ -466,6 +466,7 @@ ath5k_pci_probe(struct pci_dev *pdev, mutex_init(&sc->lock); spin_lock_init(&sc->rxbuflock); spin_lock_init(&sc->txbuflock); + spin_lock_init(&sc->block); /* Set private data */ pci_set_drvdata(pdev, hw); @@ -2179,8 +2180,11 @@ ath5k_beacon_config(struct ath5k_softc *sc) sc->imask |= AR5K_INT_SWBA; - if (ath5k_hw_hasveol(ah)) + if (ath5k_hw_hasveol(ah)) { + spin_lock(&sc->block); ath5k_beacon_send(sc); + spin_unlock(&sc->block); + } } /* TODO else AP */ @@ -2403,7 +2407,9 @@ ath5k_intr(int irq, void *dev_id) TSF_TO_TU(tsf), (unsigned long long) tsf); } else { + spin_lock(&sc->block); ath5k_beacon_send(sc); + spin_unlock(&sc->block); } } if (status & AR5K_INT_RXEOL) { @@ -3050,6 +3056,7 @@ static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) { struct ath5k_softc *sc = hw->priv; + unsigned long flags; int ret; ath5k_debug_dump_skb(sc, skb, "BC ", 1); @@ -3059,12 +3066,14 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) goto end; } + spin_lock_irqsave(&sc->block, flags); ath5k_txbuf_free(sc, sc->bbuf); sc->bbuf->skb = skb; ret = ath5k_beacon_setup(sc, sc->bbuf); if (ret) sc->bbuf->skb = NULL; - else { + spin_unlock_irqrestore(&sc->block, flags); + if (!ret) { ath5k_beacon_config(sc); mmiowb(); } diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index d7e03e6b827..7ec2f377d5c 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -172,6 +172,7 @@ struct ath5k_softc { struct tasklet_struct txtq; /* tx intr tasklet */ struct ath5k_led tx_led; /* tx led */ + spinlock_t block; /* protects beacon */ struct ath5k_buf *bbuf; /* beacon buffer */ unsigned int bhalq, /* SW q for outgoing beacons */ bmisscount, /* missed beacon transmits */ From 67d2e2dfab31b4c0497ce8a84d63efc931f10bb7 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 18 Aug 2008 21:45:28 +0200 Subject: [PATCH 156/638] Ath5k: fix bintval setup bintval is set to the initial value at .config_interface which is too late, since it overwrites previously set value from .config. Move the initialization to the .add_interface. Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 7bc012fca05..0676c6d8438 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2751,6 +2751,11 @@ static int ath5k_add_interface(struct ieee80211_hw *hw, ret = -EOPNOTSUPP; goto end; } + + /* Set to a reasonable value. Note that this will + * be set to mac80211's value at ath5k_config(). */ + sc->bintval = 1000; + ret = 0; end: mutex_unlock(&sc->lock); @@ -2795,9 +2800,6 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ath5k_hw *ah = sc->ah; int ret; - /* Set to a reasonable value. Note that this will - * be set to mac80211's value at ath5k_config(). */ - sc->bintval = 1000; mutex_lock(&sc->lock); if (sc->vif != vif) { ret = -EIO; From 988b02f1bf5b608ef91a9d98c7170d037d0f12e3 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 18 Aug 2008 22:56:53 +0300 Subject: [PATCH 157/638] net: rfkill: add missing line break Trivial patch adding a missing line break on rfkill_claim_show(). Signed-off-by: Felipe Balbi Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 35a9994e233..74aecc098ba 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -377,7 +377,7 @@ static ssize_t rfkill_claim_show(struct device *dev, { struct rfkill *rfkill = to_rfkill(dev); - return sprintf(buf, "%d", rfkill->user_claim); + return sprintf(buf, "%d\n", rfkill->user_claim); } static ssize_t rfkill_claim_store(struct device *dev, From 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 19 Aug 2008 10:54:32 +0300 Subject: [PATCH 158/638] mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM The previous code was using IWEVCUSTOM to report IEs from AssocReq and AssocResp frames into user space. This can easily hit the 256 byte limit (IW_CUSTOM_MAX) with APs that include number of vendor IEs in AssocResp. This results in the event message not being sent and dmesg showing "wlan0 (WE) : Wireless Event too big (366)" type of errors. Convert mac80211 to use IWEVASSOCREQIE/IWEVASSOCRESPIE to avoid the issue of being unable to send association IEs as wireless events. These newer event types use binary encoding and larger maximum size (IW_GENERIC_IE_MAX = 1024), so the likelyhood of not being able to send the IEs is much smaller than with IWEVCUSTOM. As an extra benefit, the code is also quite a bit simpler since there is no need to allocate an extra buffer for hex encoding. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 48 +++++++++------------------------------------ 1 file changed, 9 insertions(+), 39 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1e97fb9fb34..09a56e24b79 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -478,51 +478,21 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_info( static void ieee80211_sta_send_associnfo(struct net_device *dev, struct ieee80211_if_sta *ifsta) { - char *buf; - size_t len; - int i; union iwreq_data wrqu; - if (!ifsta->assocreq_ies && !ifsta->assocresp_ies) - return; - - buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len + - ifsta->assocresp_ies_len), GFP_KERNEL); - if (!buf) - return; - - len = sprintf(buf, "ASSOCINFO("); if (ifsta->assocreq_ies) { - len += sprintf(buf + len, "ReqIEs="); - for (i = 0; i < ifsta->assocreq_ies_len; i++) { - len += sprintf(buf + len, "%02x", - ifsta->assocreq_ies[i]); - } + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = ifsta->assocreq_ies_len; + wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, + ifsta->assocreq_ies); } + if (ifsta->assocresp_ies) { - if (ifsta->assocreq_ies) - len += sprintf(buf + len, " "); - len += sprintf(buf + len, "RespIEs="); - for (i = 0; i < ifsta->assocresp_ies_len; i++) { - len += sprintf(buf + len, "%02x", - ifsta->assocresp_ies[i]); - } + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = ifsta->assocresp_ies_len; + wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, + ifsta->assocresp_ies); } - len += sprintf(buf + len, ")"); - - if (len > IW_CUSTOM_MAX) { - len = sprintf(buf, "ASSOCRESPIE="); - for (i = 0; i < ifsta->assocresp_ies_len; i++) { - len += sprintf(buf + len, "%02x", - ifsta->assocresp_ies[i]); - } - } - - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = len; - wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf); - - kfree(buf); } From 667d8af9af775a5fea203890978037ea750816cc Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 23 Aug 2008 18:27:38 +0200 Subject: [PATCH 159/638] net/mac80211/mesh.c: correct the argument to __mesh_table_free In the function mesh_table_grow, it is the new table not the argument table that should be freed if the function fails (cf commit bd9b448f4c0a514559bdae4ca18ca3e8cd999c6d) The semantic match that detects this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; expression E,f; position p1,p2,p3; identifier l; statement S; @@ x = mesh_table_alloc@p1(...) ... if (x == NULL) S ... when != E = x when != mesh_table_free(x) goto@p2 l; ... when != E = x when != f(...,x,...) when any ( return \(0\|x\); | return@p3 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; p3 << r.p3; @@ print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- net/mac80211/mesh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index b5933b27149..35f2f95f2fa 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -383,7 +383,7 @@ errcopy: hlist_for_each_safe(p, q, &newtbl->hash_buckets[i]) tbl->free_node(p, 0); } - __mesh_table_free(tbl); + __mesh_table_free(newtbl); endgrow: return NULL; } From 93015f0f34e81a47c4126329746ce5f364bafd11 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 25 Aug 2008 11:57:06 +0300 Subject: [PATCH 160/638] mac80211: Fix debugfs file add/del for netdev Previous version was using incorrect union structures for non-AP interfaces when adding and removing max_ratectrl_rateidx and force_unicast_rateidx entries. Depending on the vif type, this ended up in corrupting debugfs entries since the dentries inside different union structures ended up going being on top of eachother.. As the end result, debugfs files were being left behind with references to freed data (instant kernel oops on access) and directories were not removed properly when unloading mac80211 drivers. This patch fixes those issues by using only a single union structure based on the vif type. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/mac80211/debugfs_netdev.c | 24 ++++++++++++------------ net/mac80211/ieee80211_i.h | 6 ++++++ 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index 475f89a8aee..8165df578c9 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -248,8 +248,8 @@ IEEE80211_IF_WFILE(min_discovery_timeout, static void add_sta_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, sta); - DEBUGFS_ADD(force_unicast_rateidx, ap); - DEBUGFS_ADD(max_ratectrl_rateidx, ap); + DEBUGFS_ADD(force_unicast_rateidx, sta); + DEBUGFS_ADD(max_ratectrl_rateidx, sta); DEBUGFS_ADD(state, sta); DEBUGFS_ADD(bssid, sta); @@ -283,8 +283,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata) static void add_wds_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, wds); - DEBUGFS_ADD(force_unicast_rateidx, ap); - DEBUGFS_ADD(max_ratectrl_rateidx, ap); + DEBUGFS_ADD(force_unicast_rateidx, wds); + DEBUGFS_ADD(max_ratectrl_rateidx, wds); DEBUGFS_ADD(peer, wds); } @@ -292,8 +292,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata) static void add_vlan_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_ADD(drop_unencrypted, vlan); - DEBUGFS_ADD(force_unicast_rateidx, ap); - DEBUGFS_ADD(max_ratectrl_rateidx, ap); + DEBUGFS_ADD(force_unicast_rateidx, vlan); + DEBUGFS_ADD(max_ratectrl_rateidx, vlan); } static void add_monitor_files(struct ieee80211_sub_if_data *sdata) @@ -381,8 +381,8 @@ static void add_files(struct ieee80211_sub_if_data *sdata) static void del_sta_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_DEL(drop_unencrypted, sta); - DEBUGFS_DEL(force_unicast_rateidx, ap); - DEBUGFS_DEL(max_ratectrl_rateidx, ap); + DEBUGFS_DEL(force_unicast_rateidx, sta); + DEBUGFS_DEL(max_ratectrl_rateidx, sta); DEBUGFS_DEL(state, sta); DEBUGFS_DEL(bssid, sta); @@ -416,8 +416,8 @@ static void del_ap_files(struct ieee80211_sub_if_data *sdata) static void del_wds_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_DEL(drop_unencrypted, wds); - DEBUGFS_DEL(force_unicast_rateidx, ap); - DEBUGFS_DEL(max_ratectrl_rateidx, ap); + DEBUGFS_DEL(force_unicast_rateidx, wds); + DEBUGFS_DEL(max_ratectrl_rateidx, wds); DEBUGFS_DEL(peer, wds); } @@ -425,8 +425,8 @@ static void del_wds_files(struct ieee80211_sub_if_data *sdata) static void del_vlan_files(struct ieee80211_sub_if_data *sdata) { DEBUGFS_DEL(drop_unencrypted, vlan); - DEBUGFS_DEL(force_unicast_rateidx, ap); - DEBUGFS_DEL(max_ratectrl_rateidx, ap); + DEBUGFS_DEL(force_unicast_rateidx, vlan); + DEBUGFS_DEL(max_ratectrl_rateidx, vlan); } static void del_monitor_files(struct ieee80211_sub_if_data *sdata) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index ec59345af65..586a9b49b0f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -470,6 +470,8 @@ struct ieee80211_sub_if_data { struct dentry *auth_transaction; struct dentry *flags; struct dentry *num_beacons_sta; + struct dentry *force_unicast_rateidx; + struct dentry *max_ratectrl_rateidx; } sta; struct { struct dentry *drop_unencrypted; @@ -483,9 +485,13 @@ struct ieee80211_sub_if_data { struct { struct dentry *drop_unencrypted; struct dentry *peer; + struct dentry *force_unicast_rateidx; + struct dentry *max_ratectrl_rateidx; } wds; struct { struct dentry *drop_unencrypted; + struct dentry *force_unicast_rateidx; + struct dentry *max_ratectrl_rateidx; } vlan; struct { struct dentry *mode; From 8ab65b03b7893da4a49009e7e356e36e27b0c407 Mon Sep 17 00:00:00 2001 From: Jan-Espen Pettersen Date: Mon, 25 Aug 2008 20:29:22 +0200 Subject: [PATCH 161/638] mac80211: don't send empty extended rates IE The association request includes a list of supported data rates. 802.11b: 4 supported rates. 802.11g: 12 (8 + 4) supported rates. 802.11a: 8 supported rates. The rates tag of the assoc request has room for only 8 rates. In case of 802.11g an extended rate tag is appended. However in net/wireless/mlme.c an extended (empty) rate tag is also appended if the number of rates is exact 8. This empty (length=0) extended rates tag causes some APs to deny association with code 18 (unsupported rates). These APs include my ZyXEL G-570U, and according to Tomas Winkler som Cisco APs. 'If count == 8' has been used to check for the need for an extended rates tag. But count would also be equal to 8 if the for loop exited because of no more supported rates. Therefore a check for count being less than rates_len would seem more correct. Thanks to: * Dan Williams for newbie guidance * Tomas Winkler for confirming the problem Signed-off-by: Jan-Espen Pettersen Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 09a56e24b79..74777ade6b2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -783,7 +783,7 @@ static void ieee80211_send_assoc(struct net_device *dev, } } - if (count == 8) { + if (rates_len > count) { pos = skb_put(skb, rates_len - count + 2); *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos++ = rates_len - count; From 576fdeaef631976c3afcb1d78ef196051282611d Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 26 Aug 2008 20:33:34 -0400 Subject: [PATCH 162/638] mac80211: quiet chatty IBSS merge message It seems obvious that this #ifndef should be the opposite polarity... Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 74777ade6b2..9bb68c6a8f4 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2838,7 +2838,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev, jiffies); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ if (beacon_timestamp > rx_timestamp) { -#ifndef CONFIG_MAC80211_IBSS_DEBUG +#ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG "%s: beacon TSF higher than " "local TSF - IBSS merge with BSSID %s\n", dev->name, print_mac(mac, mgmt->bssid)); From 639f6571458948b5112be2cf00c0c2c04db2897d Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 27 Aug 2008 10:51:02 +0800 Subject: [PATCH 163/638] Blackfin arch: move include/asm-blackfin header files to arch/blackfin Signed-off-by: Bryan Wu --- arch/blackfin/Makefile | 26 ++++--------------- .../blackfin/include/asm}/.gitignore | 0 .../blackfin/include/asm}/Kbuild | 0 .../blackfin/include/asm}/a.out.h | 0 .../blackfin/include/asm}/atomic.h | 0 .../blackfin/include/asm}/auxvec.h | 0 .../blackfin/include/asm}/bfin-global.h | 0 .../blackfin/include/asm}/bfin5xx_spi.h | 0 .../blackfin/include/asm}/bfin_simple_timer.h | 0 .../blackfin/include/asm}/bfin_sport.h | 0 .../blackfin/include/asm}/bitops.h | 0 .../blackfin/include/asm}/blackfin.h | 4 +-- .../blackfin/include/asm}/bug.h | 0 .../blackfin/include/asm}/bugs.h | 0 .../blackfin/include/asm}/byteorder.h | 0 .../blackfin/include/asm}/cache.h | 0 .../blackfin/include/asm}/cacheflush.h | 0 .../blackfin/include/asm}/cdef_LPBlackfin.h | 2 +- .../blackfin/include/asm}/checksum.h | 0 .../blackfin/include/asm}/clocks.h | 0 .../blackfin/include/asm}/context.S | 0 .../blackfin/include/asm}/cplb-mpu.h | 0 .../blackfin/include/asm}/cplb.h | 2 +- .../blackfin/include/asm}/cplbinit.h | 0 .../blackfin/include/asm}/cpumask.h | 0 .../blackfin/include/asm}/cputime.h | 0 .../blackfin/include/asm}/current.h | 0 .../blackfin/include/asm}/def_LPBlackfin.h | 2 +- .../blackfin/include/asm}/delay.h | 2 +- .../blackfin/include/asm}/device.h | 0 .../blackfin/include/asm}/div64.h | 0 .../blackfin/include/asm}/dma-mapping.h | 0 .../blackfin/include/asm}/dma.h | 2 +- .../blackfin/include/asm}/dpmc.h | 0 .../blackfin/include/asm}/early_printk.h | 0 .../blackfin/include/asm}/elf.h | 0 .../blackfin/include/asm}/emergency-restart.h | 0 .../blackfin/include/asm}/entry.h | 0 .../blackfin/include/asm}/errno.h | 0 .../blackfin/include/asm}/fb.h | 0 .../blackfin/include/asm}/fcntl.h | 0 .../blackfin/include/asm}/fixed_code.h | 0 .../blackfin/include/asm}/flat.h | 0 .../blackfin/include/asm}/futex.h | 0 .../blackfin/include/asm}/gpio.h | 2 +- .../blackfin/include/asm}/gptimers.h | 0 .../blackfin/include/asm}/hardirq.h | 0 .../blackfin/include/asm}/hw_irq.h | 0 .../blackfin/include/asm}/io.h | 0 .../blackfin/include/asm}/ioctl.h | 0 .../blackfin/include/asm}/ioctls.h | 0 .../blackfin/include/asm}/ipcbuf.h | 0 .../blackfin/include/asm}/irq.h | 4 +-- .../blackfin/include/asm}/irq_handler.h | 0 .../blackfin/include/asm}/irq_regs.h | 0 .../blackfin/include/asm}/kdebug.h | 0 .../blackfin/include/asm}/kgdb.h | 0 .../blackfin/include/asm}/kmap_types.h | 0 .../blackfin/include/asm}/l1layout.h | 0 .../blackfin/include/asm}/linkage.h | 0 .../blackfin/include/asm}/local.h | 0 .../blackfin/include/asm}/mem_map.h | 2 +- .../blackfin/include/asm}/mman.h | 0 .../blackfin/include/asm}/mmu.h | 0 .../blackfin/include/asm}/mmu_context.h | 0 .../blackfin/include/asm}/module.h | 0 .../blackfin/include/asm}/msgbuf.h | 0 .../blackfin/include/asm}/mutex.h | 0 .../blackfin/include/asm}/nand.h | 0 .../blackfin/include/asm}/page.h | 0 .../blackfin/include/asm}/page_offset.h | 0 .../blackfin/include/asm}/param.h | 0 .../blackfin/include/asm}/pci.h | 0 .../blackfin/include/asm}/percpu.h | 0 .../blackfin/include/asm}/pgalloc.h | 0 .../blackfin/include/asm}/pgtable.h | 2 +- .../blackfin/include/asm}/poll.h | 0 .../blackfin/include/asm}/portmux.h | 2 +- .../blackfin/include/asm}/posix_types.h | 0 .../blackfin/include/asm}/processor.h | 0 .../blackfin/include/asm}/ptrace.h | 0 .../blackfin/include/asm}/reboot.h | 0 .../blackfin/include/asm}/resource.h | 0 .../blackfin/include/asm}/scatterlist.h | 0 .../blackfin/include/asm}/sections.h | 0 .../blackfin/include/asm}/segment.h | 0 .../blackfin/include/asm}/sembuf.h | 0 .../blackfin/include/asm}/serial.h | 0 .../blackfin/include/asm}/setup.h | 0 .../blackfin/include/asm}/shmbuf.h | 0 .../blackfin/include/asm}/shmparam.h | 0 .../blackfin/include/asm}/sigcontext.h | 0 .../blackfin/include/asm}/siginfo.h | 0 .../blackfin/include/asm}/signal.h | 0 .../blackfin/include/asm}/socket.h | 0 .../blackfin/include/asm}/sockios.h | 0 .../blackfin/include/asm}/spinlock.h | 0 .../blackfin/include/asm}/stat.h | 0 .../blackfin/include/asm}/statfs.h | 0 .../blackfin/include/asm}/string.h | 0 .../blackfin/include/asm}/system.h | 2 +- .../blackfin/include/asm}/termbits.h | 0 .../blackfin/include/asm}/termios.h | 0 .../blackfin/include/asm}/thread_info.h | 0 .../blackfin/include/asm}/time.h | 0 .../blackfin/include/asm}/timex.h | 0 .../blackfin/include/asm}/tlb.h | 0 .../blackfin/include/asm}/tlbflush.h | 0 .../blackfin/include/asm}/topology.h | 0 .../blackfin/include/asm}/trace.h | 0 .../blackfin/include/asm}/traps.h | 0 .../blackfin/include/asm}/types.h | 0 .../blackfin/include/asm}/uaccess.h | 0 .../blackfin/include/asm}/ucontext.h | 0 .../blackfin/include/asm}/unaligned.h | 0 .../blackfin/include/asm}/unistd.h | 0 .../blackfin/include/asm}/user.h | 0 arch/blackfin/kernel/entry.S | 2 +- arch/blackfin/mach-bf527/head.S | 4 +-- .../mach-bf527/include/mach}/anomaly.h | 0 .../blackfin/mach-bf527/include/mach}/bf527.h | 0 .../include/mach}/bfin_serial_5xx.h | 0 .../mach-bf527/include/mach}/bfin_sir.h | 0 .../mach-bf527/include/mach}/blackfin.h | 0 .../mach-bf527/include/mach}/cdefBF522.h | 2 +- .../mach-bf527/include/mach}/cdefBF525.h | 2 +- .../mach-bf527/include/mach}/cdefBF527.h | 2 +- .../mach-bf527/include/mach}/cdefBF52x_base.h | 2 +- .../mach-bf527/include/mach}/defBF522.h | 2 +- .../mach-bf527/include/mach}/defBF525.h | 2 +- .../mach-bf527/include/mach}/defBF527.h | 2 +- .../mach-bf527/include/mach}/defBF52x_base.h | 0 .../blackfin/mach-bf527/include/mach}/dma.h | 0 .../blackfin/mach-bf527/include/mach}/irq.h | 0 .../mach-bf527/include/mach}/mem_init.h | 0 .../mach-bf527/include/mach}/mem_map.h | 0 .../mach-bf527/include/mach}/portmux.h | 0 arch/blackfin/mach-bf533/head.S | 4 +-- .../mach-bf533/include/mach}/anomaly.h | 0 .../blackfin/mach-bf533/include/mach}/bf533.h | 0 .../include/mach}/bfin_serial_5xx.h | 0 .../mach-bf533/include/mach}/bfin_sir.h | 0 .../mach-bf533/include/mach}/blackfin.h | 0 .../mach-bf533/include/mach}/cdefBF532.h | 2 +- .../mach-bf533/include/mach}/defBF532.h | 2 +- .../blackfin/mach-bf533/include/mach}/dma.h | 0 .../blackfin/mach-bf533/include/mach}/irq.h | 0 .../mach-bf533/include/mach}/mem_init.h | 0 .../mach-bf533/include/mach}/mem_map.h | 0 .../mach-bf533/include/mach}/portmux.h | 0 arch/blackfin/mach-bf537/head.S | 4 +-- .../mach-bf537/include/mach}/anomaly.h | 0 .../blackfin/mach-bf537/include/mach}/bf537.h | 0 .../include/mach}/bfin_serial_5xx.h | 0 .../mach-bf537/include/mach}/bfin_sir.h | 0 .../mach-bf537/include/mach}/blackfin.h | 0 .../mach-bf537/include/mach}/cdefBF534.h | 2 +- .../mach-bf537/include/mach}/cdefBF537.h | 0 .../mach-bf537/include/mach}/defBF534.h | 2 +- .../mach-bf537/include/mach}/defBF537.h | 2 +- .../blackfin/mach-bf537/include/mach}/dma.h | 0 .../blackfin/mach-bf537/include/mach}/irq.h | 0 .../mach-bf537/include/mach}/mem_init.h | 0 .../mach-bf537/include/mach}/mem_map.h | 0 .../mach-bf537/include/mach}/portmux.h | 0 arch/blackfin/mach-bf548/boards/cm_bf548.c | 4 +-- arch/blackfin/mach-bf548/boards/ezkit.c | 4 +-- arch/blackfin/mach-bf548/head.S | 4 +-- .../mach-bf548/include/mach}/anomaly.h | 0 .../blackfin/mach-bf548/include/mach}/bf548.h | 0 .../mach-bf548/include/mach}/bf54x-lq043.h | 0 .../mach-bf548/include/mach}/bf54x_keys.h | 0 .../include/mach}/bfin_serial_5xx.h | 0 .../mach-bf548/include/mach}/bfin_sir.h | 0 .../mach-bf548/include/mach}/blackfin.h | 0 .../mach-bf548/include/mach}/cdefBF542.h | 2 +- .../mach-bf548/include/mach}/cdefBF544.h | 2 +- .../mach-bf548/include/mach}/cdefBF547.h | 2 +- .../mach-bf548/include/mach}/cdefBF548.h | 2 +- .../mach-bf548/include/mach}/cdefBF549.h | 2 +- .../mach-bf548/include/mach}/cdefBF54x_base.h | 0 .../mach-bf548/include/mach}/defBF542.h | 2 +- .../mach-bf548/include/mach}/defBF544.h | 2 +- .../mach-bf548/include/mach}/defBF547.h | 2 +- .../mach-bf548/include/mach}/defBF548.h | 2 +- .../mach-bf548/include/mach}/defBF549.h | 2 +- .../mach-bf548/include/mach}/defBF54x_base.h | 0 .../blackfin/mach-bf548/include/mach}/dma.h | 0 .../blackfin/mach-bf548/include/mach}/gpio.h | 0 .../blackfin/mach-bf548/include/mach}/irq.h | 0 .../mach-bf548/include/mach}/mem_init.h | 0 .../mach-bf548/include/mach}/mem_map.h | 0 .../mach-bf548/include/mach}/portmux.h | 0 arch/blackfin/mach-bf561/head.S | 4 +-- .../mach-bf561/include/mach}/anomaly.h | 0 .../blackfin/mach-bf561/include/mach}/bf561.h | 0 .../include/mach}/bfin_serial_5xx.h | 0 .../mach-bf561/include/mach}/bfin_sir.h | 0 .../mach-bf561/include/mach}/blackfin.h | 0 .../mach-bf561/include/mach}/cdefBF561.h | 2 +- .../mach-bf561/include/mach}/defBF561.h | 2 +- .../blackfin/mach-bf561/include/mach}/dma.h | 0 .../blackfin/mach-bf561/include/mach}/irq.h | 0 .../mach-bf561/include/mach}/mem_init.h | 0 .../mach-bf561/include/mach}/mem_map.h | 0 .../mach-bf561/include/mach}/portmux.h | 0 arch/blackfin/mach-common/arch_checks.c | 4 +-- arch/blackfin/mach-common/dpmc_modes.S | 2 +- arch/blackfin/mach-common/entry.S | 2 +- arch/blackfin/mach-common/interrupt.S | 4 +-- drivers/input/keyboard/bf54x-keys.c | 2 +- drivers/serial/bfin_5xx.c | 2 +- drivers/video/bf54x-lq043fb.c | 2 +- 213 files changed, 67 insertions(+), 83 deletions(-) rename {include/asm-blackfin => arch/blackfin/include/asm}/.gitignore (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/Kbuild (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/a.out.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/atomic.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/auxvec.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin-global.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin5xx_spi.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin_simple_timer.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin_sport.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bitops.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/blackfin.h (96%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bug.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/bugs.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/byteorder.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cache.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cacheflush.h (100%) rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/cdef_LPBlackfin.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/checksum.h (100%) rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/clocks.h (100%) rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/context.S (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cplb-mpu.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cplb.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cplbinit.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cpumask.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/cputime.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/current.h (100%) rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/def_LPBlackfin.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/delay.h (97%) rename {include/asm-blackfin => arch/blackfin/include/asm}/device.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/div64.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/dma-mapping.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/dma.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/dpmc.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/early_printk.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/elf.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/emergency-restart.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/entry.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/errno.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/fb.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/fcntl.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/fixed_code.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/flat.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/futex.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/gpio.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/gptimers.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/hardirq.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/hw_irq.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/io.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/ioctl.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/ioctls.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/ipcbuf.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/irq.h (96%) rename {include/asm-blackfin => arch/blackfin/include/asm}/irq_handler.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/irq_regs.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/kdebug.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/kgdb.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/kmap_types.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/l1layout.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/linkage.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/local.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/mem_map.h (83%) rename {include/asm-blackfin => arch/blackfin/include/asm}/mman.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/mmu.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/mmu_context.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/module.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/msgbuf.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/mutex.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/nand.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/page.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/page_offset.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/param.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/pci.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/percpu.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/pgalloc.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/pgtable.h (98%) rename {include/asm-blackfin => arch/blackfin/include/asm}/poll.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/portmux.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/posix_types.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/processor.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/ptrace.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/reboot.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/resource.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/scatterlist.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/sections.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/segment.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/sembuf.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/serial.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/setup.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/shmbuf.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/shmparam.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/sigcontext.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/siginfo.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/signal.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/socket.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/sockios.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/spinlock.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/stat.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/statfs.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/string.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/system.h (99%) rename {include/asm-blackfin => arch/blackfin/include/asm}/termbits.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/termios.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/thread_info.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/time.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/timex.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/tlb.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/tlbflush.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/topology.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/trace.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/traps.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/types.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/uaccess.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/ucontext.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/unaligned.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/unistd.h (100%) rename {include/asm-blackfin => arch/blackfin/include/asm}/user.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/anomaly.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bf527.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bfin_serial_5xx.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bfin_sir.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/blackfin.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF522.h (96%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF525.h (99%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF527.h (99%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF52x_base.h (99%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF522.h (96%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF525.h (99%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF527.h (99%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF52x_base.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/dma.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/irq.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/mem_init.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/mem_map.h (100%) rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/portmux.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/anomaly.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bf533.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bfin_serial_5xx.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bfin_sir.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/blackfin.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/cdefBF532.h (99%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/defBF532.h (99%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/dma.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/irq.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/mem_init.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/mem_map.h (100%) rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/portmux.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/anomaly.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bf537.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bfin_serial_5xx.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bfin_sir.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/blackfin.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/cdefBF534.h (99%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/cdefBF537.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/defBF534.h (99%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/defBF537.h (99%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/dma.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/irq.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/mem_init.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/mem_map.h (100%) rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/portmux.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/anomaly.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf548.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf54x-lq043.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf54x_keys.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bfin_serial_5xx.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bfin_sir.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/blackfin.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF542.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF544.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF547.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF548.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF549.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF54x_base.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF542.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF544.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF547.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF548.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF549.h (99%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF54x_base.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/dma.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/gpio.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/irq.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/mem_init.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/mem_map.h (100%) rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/portmux.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/anomaly.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bf561.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bfin_serial_5xx.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bfin_sir.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/blackfin.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/cdefBF561.h (99%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/defBF561.h (99%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/dma.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/irq.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/mem_init.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/mem_map.h (100%) rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/portmux.h (100%) diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 9564731ad3a..eac0533d6e4 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -98,36 +98,20 @@ libs-y += arch/$(ARCH)/lib/ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ +machdirs := $(patsubst %,arch/blackfin/mach-%/, $(machine-y)) +KBUILD_CFLAGS += -Iarch/$(ARCH)/include/ +KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include -# Update machine arch symlinks if something which affects -# them changed. We use .mach to indicate when they were updated -# last, otherwise make uses the target directory mtime. - - show_mach_symlink = : - quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' -silent_show_mach_symlink = : -include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf - @$($(quiet)show_mach_symlink) -ifneq ($(KBUILD_SRC),) - $(Q)mkdir -p include/asm-$(ARCH) - $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach -else - $(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach -endif - @touch $@ +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs)) CLEAN_FILES += \ - include/asm-$(ARCH)/asm-offsets.h \ + arch/$(ARCH)/include/asm/asm-offsets.h \ arch/$(ARCH)/kernel/asm-offsets.s \ - include/asm-$(ARCH)/mach \ - include/asm-$(ARCH)/.mach -archprepare: include/asm-blackfin/.mach archclean: $(Q)$(MAKE) $(clean)=$(boot) - INSTALL_PATH ?= /tftpboot boot := arch/$(ARCH)/boot BOOT_TARGETS = vmImage diff --git a/include/asm-blackfin/.gitignore b/arch/blackfin/include/asm/.gitignore similarity index 100% rename from include/asm-blackfin/.gitignore rename to arch/blackfin/include/asm/.gitignore diff --git a/include/asm-blackfin/Kbuild b/arch/blackfin/include/asm/Kbuild similarity index 100% rename from include/asm-blackfin/Kbuild rename to arch/blackfin/include/asm/Kbuild diff --git a/include/asm-blackfin/a.out.h b/arch/blackfin/include/asm/a.out.h similarity index 100% rename from include/asm-blackfin/a.out.h rename to arch/blackfin/include/asm/a.out.h diff --git a/include/asm-blackfin/atomic.h b/arch/blackfin/include/asm/atomic.h similarity index 100% rename from include/asm-blackfin/atomic.h rename to arch/blackfin/include/asm/atomic.h diff --git a/include/asm-blackfin/auxvec.h b/arch/blackfin/include/asm/auxvec.h similarity index 100% rename from include/asm-blackfin/auxvec.h rename to arch/blackfin/include/asm/auxvec.h diff --git a/include/asm-blackfin/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h similarity index 100% rename from include/asm-blackfin/bfin-global.h rename to arch/blackfin/include/asm/bfin-global.h diff --git a/include/asm-blackfin/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h similarity index 100% rename from include/asm-blackfin/bfin5xx_spi.h rename to arch/blackfin/include/asm/bfin5xx_spi.h diff --git a/include/asm-blackfin/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h similarity index 100% rename from include/asm-blackfin/bfin_simple_timer.h rename to arch/blackfin/include/asm/bfin_simple_timer.h diff --git a/include/asm-blackfin/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h similarity index 100% rename from include/asm-blackfin/bfin_sport.h rename to arch/blackfin/include/asm/bfin_sport.h diff --git a/include/asm-blackfin/bitops.h b/arch/blackfin/include/asm/bitops.h similarity index 100% rename from include/asm-blackfin/bitops.h rename to arch/blackfin/include/asm/bitops.h diff --git a/include/asm-blackfin/blackfin.h b/arch/blackfin/include/asm/blackfin.h similarity index 96% rename from include/asm-blackfin/blackfin.h rename to arch/blackfin/include/asm/blackfin.h index 984b74f0a2e..8749b0e321a 100644 --- a/include/asm-blackfin/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -11,7 +11,7 @@ #define HI(con32) (((con32) >> 16) & 0xFFFF) #define hi(con32) (((con32) >> 16) & 0xFFFF) -#include +#include #ifndef __ASSEMBLY__ @@ -86,7 +86,7 @@ static inline void CSYNC(void) #endif /* __ASSEMBLY__ */ -#include +#include #include #endif /* _BLACKFIN_H_ */ diff --git a/include/asm-blackfin/bug.h b/arch/blackfin/include/asm/bug.h similarity index 100% rename from include/asm-blackfin/bug.h rename to arch/blackfin/include/asm/bug.h diff --git a/include/asm-blackfin/bugs.h b/arch/blackfin/include/asm/bugs.h similarity index 100% rename from include/asm-blackfin/bugs.h rename to arch/blackfin/include/asm/bugs.h diff --git a/include/asm-blackfin/byteorder.h b/arch/blackfin/include/asm/byteorder.h similarity index 100% rename from include/asm-blackfin/byteorder.h rename to arch/blackfin/include/asm/byteorder.h diff --git a/include/asm-blackfin/cache.h b/arch/blackfin/include/asm/cache.h similarity index 100% rename from include/asm-blackfin/cache.h rename to arch/blackfin/include/asm/cache.h diff --git a/include/asm-blackfin/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h similarity index 100% rename from include/asm-blackfin/cacheflush.h rename to arch/blackfin/include/asm/cacheflush.h diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h similarity index 99% rename from include/asm-blackfin/mach-common/cdef_LPBlackfin.h rename to arch/blackfin/include/asm/cdef_LPBlackfin.h index d39c396f850..35f841bce57 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h @@ -33,7 +33,7 @@ #warning cdef_LPBlackfin.h should only be included for 532 compatible chips. #endif */ -#include +#include /*Cache & SRAM Memory*/ #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) diff --git a/include/asm-blackfin/checksum.h b/arch/blackfin/include/asm/checksum.h similarity index 100% rename from include/asm-blackfin/checksum.h rename to arch/blackfin/include/asm/checksum.h diff --git a/include/asm-blackfin/mach-common/clocks.h b/arch/blackfin/include/asm/clocks.h similarity index 100% rename from include/asm-blackfin/mach-common/clocks.h rename to arch/blackfin/include/asm/clocks.h diff --git a/include/asm-blackfin/mach-common/context.S b/arch/blackfin/include/asm/context.S similarity index 100% rename from include/asm-blackfin/mach-common/context.S rename to arch/blackfin/include/asm/context.S diff --git a/include/asm-blackfin/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h similarity index 100% rename from include/asm-blackfin/cplb-mpu.h rename to arch/blackfin/include/asm/cplb-mpu.h diff --git a/include/asm-blackfin/cplb.h b/arch/blackfin/include/asm/cplb.h similarity index 99% rename from include/asm-blackfin/cplb.h rename to arch/blackfin/include/asm/cplb.h index 5b0da9a69b6..05d6f05fb74 100644 --- a/include/asm-blackfin/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -31,7 +31,7 @@ #define _CPLB_H #include -#include +#include #define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO) #define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK) diff --git a/include/asm-blackfin/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h similarity index 100% rename from include/asm-blackfin/cplbinit.h rename to arch/blackfin/include/asm/cplbinit.h diff --git a/include/asm-blackfin/cpumask.h b/arch/blackfin/include/asm/cpumask.h similarity index 100% rename from include/asm-blackfin/cpumask.h rename to arch/blackfin/include/asm/cpumask.h diff --git a/include/asm-blackfin/cputime.h b/arch/blackfin/include/asm/cputime.h similarity index 100% rename from include/asm-blackfin/cputime.h rename to arch/blackfin/include/asm/cputime.h diff --git a/include/asm-blackfin/current.h b/arch/blackfin/include/asm/current.h similarity index 100% rename from include/asm-blackfin/current.h rename to arch/blackfin/include/asm/current.h diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h similarity index 99% rename from include/asm-blackfin/mach-common/def_LPBlackfin.h rename to arch/blackfin/include/asm/def_LPBlackfin.h index e8967f6124f..6341eebff3d 100644 --- a/include/asm-blackfin/mach-common/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -31,7 +31,7 @@ #ifndef _DEF_LPBLACKFIN_H #define _DEF_LPBLACKFIN_H -#include +#include #define MK_BMSK_(x) (1< +#include static inline void __delay(unsigned long loops) { diff --git a/include/asm-blackfin/device.h b/arch/blackfin/include/asm/device.h similarity index 100% rename from include/asm-blackfin/device.h rename to arch/blackfin/include/asm/device.h diff --git a/include/asm-blackfin/div64.h b/arch/blackfin/include/asm/div64.h similarity index 100% rename from include/asm-blackfin/div64.h rename to arch/blackfin/include/asm/div64.h diff --git a/include/asm-blackfin/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h similarity index 100% rename from include/asm-blackfin/dma-mapping.h rename to arch/blackfin/include/asm/dma-mapping.h diff --git a/include/asm-blackfin/dma.h b/arch/blackfin/include/asm/dma.h similarity index 99% rename from include/asm-blackfin/dma.h rename to arch/blackfin/include/asm/dma.h index 3cd4b522aa3..6509733bb0f 100644 --- a/include/asm-blackfin/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -35,7 +35,7 @@ #include #include -#include +#include #include #include #include diff --git a/include/asm-blackfin/dpmc.h b/arch/blackfin/include/asm/dpmc.h similarity index 100% rename from include/asm-blackfin/dpmc.h rename to arch/blackfin/include/asm/dpmc.h diff --git a/include/asm-blackfin/early_printk.h b/arch/blackfin/include/asm/early_printk.h similarity index 100% rename from include/asm-blackfin/early_printk.h rename to arch/blackfin/include/asm/early_printk.h diff --git a/include/asm-blackfin/elf.h b/arch/blackfin/include/asm/elf.h similarity index 100% rename from include/asm-blackfin/elf.h rename to arch/blackfin/include/asm/elf.h diff --git a/include/asm-blackfin/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h similarity index 100% rename from include/asm-blackfin/emergency-restart.h rename to arch/blackfin/include/asm/emergency-restart.h diff --git a/include/asm-blackfin/entry.h b/arch/blackfin/include/asm/entry.h similarity index 100% rename from include/asm-blackfin/entry.h rename to arch/blackfin/include/asm/entry.h diff --git a/include/asm-blackfin/errno.h b/arch/blackfin/include/asm/errno.h similarity index 100% rename from include/asm-blackfin/errno.h rename to arch/blackfin/include/asm/errno.h diff --git a/include/asm-blackfin/fb.h b/arch/blackfin/include/asm/fb.h similarity index 100% rename from include/asm-blackfin/fb.h rename to arch/blackfin/include/asm/fb.h diff --git a/include/asm-blackfin/fcntl.h b/arch/blackfin/include/asm/fcntl.h similarity index 100% rename from include/asm-blackfin/fcntl.h rename to arch/blackfin/include/asm/fcntl.h diff --git a/include/asm-blackfin/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h similarity index 100% rename from include/asm-blackfin/fixed_code.h rename to arch/blackfin/include/asm/fixed_code.h diff --git a/include/asm-blackfin/flat.h b/arch/blackfin/include/asm/flat.h similarity index 100% rename from include/asm-blackfin/flat.h rename to arch/blackfin/include/asm/flat.h diff --git a/include/asm-blackfin/futex.h b/arch/blackfin/include/asm/futex.h similarity index 100% rename from include/asm-blackfin/futex.h rename to arch/blackfin/include/asm/futex.h diff --git a/include/asm-blackfin/gpio.h b/arch/blackfin/include/asm/gpio.h similarity index 99% rename from include/asm-blackfin/gpio.h rename to arch/blackfin/include/asm/gpio.h index 168f1251eb4..ad33ac271fd 100644 --- a/include/asm-blackfin/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -224,7 +224,7 @@ #endif #ifdef BF548_FAMILY -#include +#include #endif #ifdef BF561_FAMILY diff --git a/include/asm-blackfin/gptimers.h b/arch/blackfin/include/asm/gptimers.h similarity index 100% rename from include/asm-blackfin/gptimers.h rename to arch/blackfin/include/asm/gptimers.h diff --git a/include/asm-blackfin/hardirq.h b/arch/blackfin/include/asm/hardirq.h similarity index 100% rename from include/asm-blackfin/hardirq.h rename to arch/blackfin/include/asm/hardirq.h diff --git a/include/asm-blackfin/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h similarity index 100% rename from include/asm-blackfin/hw_irq.h rename to arch/blackfin/include/asm/hw_irq.h diff --git a/include/asm-blackfin/io.h b/arch/blackfin/include/asm/io.h similarity index 100% rename from include/asm-blackfin/io.h rename to arch/blackfin/include/asm/io.h diff --git a/include/asm-blackfin/ioctl.h b/arch/blackfin/include/asm/ioctl.h similarity index 100% rename from include/asm-blackfin/ioctl.h rename to arch/blackfin/include/asm/ioctl.h diff --git a/include/asm-blackfin/ioctls.h b/arch/blackfin/include/asm/ioctls.h similarity index 100% rename from include/asm-blackfin/ioctls.h rename to arch/blackfin/include/asm/ioctls.h diff --git a/include/asm-blackfin/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h similarity index 100% rename from include/asm-blackfin/ipcbuf.h rename to arch/blackfin/include/asm/ipcbuf.h diff --git a/include/asm-blackfin/irq.h b/arch/blackfin/include/asm/irq.h similarity index 96% rename from include/asm-blackfin/irq.h rename to arch/blackfin/include/asm/irq.h index 86b67834354..89f59e18af9 100644 --- a/include/asm-blackfin/irq.h +++ b/arch/blackfin/include/asm/irq.h @@ -17,7 +17,7 @@ #ifndef _BFIN_IRQ_H_ #define _BFIN_IRQ_H_ -#include +#include #include /******************************************************************************* @@ -34,7 +34,7 @@ * interrupts apart (just the TX/RX for the various devices) *******************************************************************************/ -/* SYS_IRQS and NR_IRQS are defined in */ +/* SYS_IRQS and NR_IRQS are defined in */ /* * Machine specific interrupt sources. diff --git a/include/asm-blackfin/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h similarity index 100% rename from include/asm-blackfin/irq_handler.h rename to arch/blackfin/include/asm/irq_handler.h diff --git a/include/asm-blackfin/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h similarity index 100% rename from include/asm-blackfin/irq_regs.h rename to arch/blackfin/include/asm/irq_regs.h diff --git a/include/asm-blackfin/kdebug.h b/arch/blackfin/include/asm/kdebug.h similarity index 100% rename from include/asm-blackfin/kdebug.h rename to arch/blackfin/include/asm/kdebug.h diff --git a/include/asm-blackfin/kgdb.h b/arch/blackfin/include/asm/kgdb.h similarity index 100% rename from include/asm-blackfin/kgdb.h rename to arch/blackfin/include/asm/kgdb.h diff --git a/include/asm-blackfin/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h similarity index 100% rename from include/asm-blackfin/kmap_types.h rename to arch/blackfin/include/asm/kmap_types.h diff --git a/include/asm-blackfin/l1layout.h b/arch/blackfin/include/asm/l1layout.h similarity index 100% rename from include/asm-blackfin/l1layout.h rename to arch/blackfin/include/asm/l1layout.h diff --git a/include/asm-blackfin/linkage.h b/arch/blackfin/include/asm/linkage.h similarity index 100% rename from include/asm-blackfin/linkage.h rename to arch/blackfin/include/asm/linkage.h diff --git a/include/asm-blackfin/local.h b/arch/blackfin/include/asm/local.h similarity index 100% rename from include/asm-blackfin/local.h rename to arch/blackfin/include/asm/local.h diff --git a/include/asm-blackfin/mem_map.h b/arch/blackfin/include/asm/mem_map.h similarity index 83% rename from include/asm-blackfin/mem_map.h rename to arch/blackfin/include/asm/mem_map.h index 42d1f37f6d9..88d04a70770 100644 --- a/include/asm-blackfin/mem_map.h +++ b/arch/blackfin/include/asm/mem_map.h @@ -7,6 +7,6 @@ #ifndef _MEM_MAP_H_ #define _MEM_MAP_H_ -#include +#include #endif /* _MEM_MAP_H_ */ diff --git a/include/asm-blackfin/mman.h b/arch/blackfin/include/asm/mman.h similarity index 100% rename from include/asm-blackfin/mman.h rename to arch/blackfin/include/asm/mman.h diff --git a/include/asm-blackfin/mmu.h b/arch/blackfin/include/asm/mmu.h similarity index 100% rename from include/asm-blackfin/mmu.h rename to arch/blackfin/include/asm/mmu.h diff --git a/include/asm-blackfin/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h similarity index 100% rename from include/asm-blackfin/mmu_context.h rename to arch/blackfin/include/asm/mmu_context.h diff --git a/include/asm-blackfin/module.h b/arch/blackfin/include/asm/module.h similarity index 100% rename from include/asm-blackfin/module.h rename to arch/blackfin/include/asm/module.h diff --git a/include/asm-blackfin/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h similarity index 100% rename from include/asm-blackfin/msgbuf.h rename to arch/blackfin/include/asm/msgbuf.h diff --git a/include/asm-blackfin/mutex.h b/arch/blackfin/include/asm/mutex.h similarity index 100% rename from include/asm-blackfin/mutex.h rename to arch/blackfin/include/asm/mutex.h diff --git a/include/asm-blackfin/nand.h b/arch/blackfin/include/asm/nand.h similarity index 100% rename from include/asm-blackfin/nand.h rename to arch/blackfin/include/asm/nand.h diff --git a/include/asm-blackfin/page.h b/arch/blackfin/include/asm/page.h similarity index 100% rename from include/asm-blackfin/page.h rename to arch/blackfin/include/asm/page.h diff --git a/include/asm-blackfin/page_offset.h b/arch/blackfin/include/asm/page_offset.h similarity index 100% rename from include/asm-blackfin/page_offset.h rename to arch/blackfin/include/asm/page_offset.h diff --git a/include/asm-blackfin/param.h b/arch/blackfin/include/asm/param.h similarity index 100% rename from include/asm-blackfin/param.h rename to arch/blackfin/include/asm/param.h diff --git a/include/asm-blackfin/pci.h b/arch/blackfin/include/asm/pci.h similarity index 100% rename from include/asm-blackfin/pci.h rename to arch/blackfin/include/asm/pci.h diff --git a/include/asm-blackfin/percpu.h b/arch/blackfin/include/asm/percpu.h similarity index 100% rename from include/asm-blackfin/percpu.h rename to arch/blackfin/include/asm/percpu.h diff --git a/include/asm-blackfin/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h similarity index 100% rename from include/asm-blackfin/pgalloc.h rename to arch/blackfin/include/asm/pgalloc.h diff --git a/include/asm-blackfin/pgtable.h b/arch/blackfin/include/asm/pgtable.h similarity index 98% rename from include/asm-blackfin/pgtable.h rename to arch/blackfin/include/asm/pgtable.h index b11b114689c..f11684e4ade 100644 --- a/include/asm-blackfin/pgtable.h +++ b/arch/blackfin/include/asm/pgtable.h @@ -4,7 +4,7 @@ #include #include -#include +#include typedef pte_t *pte_addr_t; /* diff --git a/include/asm-blackfin/poll.h b/arch/blackfin/include/asm/poll.h similarity index 100% rename from include/asm-blackfin/poll.h rename to arch/blackfin/include/asm/poll.h diff --git a/include/asm-blackfin/portmux.h b/arch/blackfin/include/asm/portmux.h similarity index 99% rename from include/asm-blackfin/portmux.h rename to arch/blackfin/include/asm/portmux.h index 0807b286cd9..88eb5c07cc2 100644 --- a/include/asm-blackfin/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -21,7 +21,7 @@ int peripheral_request_list(const unsigned short per[], const char *label); void peripheral_free_list(const unsigned short per[]); #include -#include +#include #ifndef P_SPORT2_TFS #define P_SPORT2_TFS P_UNDEF diff --git a/include/asm-blackfin/posix_types.h b/arch/blackfin/include/asm/posix_types.h similarity index 100% rename from include/asm-blackfin/posix_types.h rename to arch/blackfin/include/asm/posix_types.h diff --git a/include/asm-blackfin/processor.h b/arch/blackfin/include/asm/processor.h similarity index 100% rename from include/asm-blackfin/processor.h rename to arch/blackfin/include/asm/processor.h diff --git a/include/asm-blackfin/ptrace.h b/arch/blackfin/include/asm/ptrace.h similarity index 100% rename from include/asm-blackfin/ptrace.h rename to arch/blackfin/include/asm/ptrace.h diff --git a/include/asm-blackfin/reboot.h b/arch/blackfin/include/asm/reboot.h similarity index 100% rename from include/asm-blackfin/reboot.h rename to arch/blackfin/include/asm/reboot.h diff --git a/include/asm-blackfin/resource.h b/arch/blackfin/include/asm/resource.h similarity index 100% rename from include/asm-blackfin/resource.h rename to arch/blackfin/include/asm/resource.h diff --git a/include/asm-blackfin/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h similarity index 100% rename from include/asm-blackfin/scatterlist.h rename to arch/blackfin/include/asm/scatterlist.h diff --git a/include/asm-blackfin/sections.h b/arch/blackfin/include/asm/sections.h similarity index 100% rename from include/asm-blackfin/sections.h rename to arch/blackfin/include/asm/sections.h diff --git a/include/asm-blackfin/segment.h b/arch/blackfin/include/asm/segment.h similarity index 100% rename from include/asm-blackfin/segment.h rename to arch/blackfin/include/asm/segment.h diff --git a/include/asm-blackfin/sembuf.h b/arch/blackfin/include/asm/sembuf.h similarity index 100% rename from include/asm-blackfin/sembuf.h rename to arch/blackfin/include/asm/sembuf.h diff --git a/include/asm-blackfin/serial.h b/arch/blackfin/include/asm/serial.h similarity index 100% rename from include/asm-blackfin/serial.h rename to arch/blackfin/include/asm/serial.h diff --git a/include/asm-blackfin/setup.h b/arch/blackfin/include/asm/setup.h similarity index 100% rename from include/asm-blackfin/setup.h rename to arch/blackfin/include/asm/setup.h diff --git a/include/asm-blackfin/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h similarity index 100% rename from include/asm-blackfin/shmbuf.h rename to arch/blackfin/include/asm/shmbuf.h diff --git a/include/asm-blackfin/shmparam.h b/arch/blackfin/include/asm/shmparam.h similarity index 100% rename from include/asm-blackfin/shmparam.h rename to arch/blackfin/include/asm/shmparam.h diff --git a/include/asm-blackfin/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h similarity index 100% rename from include/asm-blackfin/sigcontext.h rename to arch/blackfin/include/asm/sigcontext.h diff --git a/include/asm-blackfin/siginfo.h b/arch/blackfin/include/asm/siginfo.h similarity index 100% rename from include/asm-blackfin/siginfo.h rename to arch/blackfin/include/asm/siginfo.h diff --git a/include/asm-blackfin/signal.h b/arch/blackfin/include/asm/signal.h similarity index 100% rename from include/asm-blackfin/signal.h rename to arch/blackfin/include/asm/signal.h diff --git a/include/asm-blackfin/socket.h b/arch/blackfin/include/asm/socket.h similarity index 100% rename from include/asm-blackfin/socket.h rename to arch/blackfin/include/asm/socket.h diff --git a/include/asm-blackfin/sockios.h b/arch/blackfin/include/asm/sockios.h similarity index 100% rename from include/asm-blackfin/sockios.h rename to arch/blackfin/include/asm/sockios.h diff --git a/include/asm-blackfin/spinlock.h b/arch/blackfin/include/asm/spinlock.h similarity index 100% rename from include/asm-blackfin/spinlock.h rename to arch/blackfin/include/asm/spinlock.h diff --git a/include/asm-blackfin/stat.h b/arch/blackfin/include/asm/stat.h similarity index 100% rename from include/asm-blackfin/stat.h rename to arch/blackfin/include/asm/stat.h diff --git a/include/asm-blackfin/statfs.h b/arch/blackfin/include/asm/statfs.h similarity index 100% rename from include/asm-blackfin/statfs.h rename to arch/blackfin/include/asm/statfs.h diff --git a/include/asm-blackfin/string.h b/arch/blackfin/include/asm/string.h similarity index 100% rename from include/asm-blackfin/string.h rename to arch/blackfin/include/asm/string.h diff --git a/include/asm-blackfin/system.h b/arch/blackfin/include/asm/system.h similarity index 99% rename from include/asm-blackfin/system.h rename to arch/blackfin/include/asm/system.h index 51494ef5bb4..8f1627d8bf0 100644 --- a/include/asm-blackfin/system.h +++ b/arch/blackfin/include/asm/system.h @@ -36,7 +36,7 @@ #include #include -#include +#include /* * Interrupt configuring macros. diff --git a/include/asm-blackfin/termbits.h b/arch/blackfin/include/asm/termbits.h similarity index 100% rename from include/asm-blackfin/termbits.h rename to arch/blackfin/include/asm/termbits.h diff --git a/include/asm-blackfin/termios.h b/arch/blackfin/include/asm/termios.h similarity index 100% rename from include/asm-blackfin/termios.h rename to arch/blackfin/include/asm/termios.h diff --git a/include/asm-blackfin/thread_info.h b/arch/blackfin/include/asm/thread_info.h similarity index 100% rename from include/asm-blackfin/thread_info.h rename to arch/blackfin/include/asm/thread_info.h diff --git a/include/asm-blackfin/time.h b/arch/blackfin/include/asm/time.h similarity index 100% rename from include/asm-blackfin/time.h rename to arch/blackfin/include/asm/time.h diff --git a/include/asm-blackfin/timex.h b/arch/blackfin/include/asm/timex.h similarity index 100% rename from include/asm-blackfin/timex.h rename to arch/blackfin/include/asm/timex.h diff --git a/include/asm-blackfin/tlb.h b/arch/blackfin/include/asm/tlb.h similarity index 100% rename from include/asm-blackfin/tlb.h rename to arch/blackfin/include/asm/tlb.h diff --git a/include/asm-blackfin/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h similarity index 100% rename from include/asm-blackfin/tlbflush.h rename to arch/blackfin/include/asm/tlbflush.h diff --git a/include/asm-blackfin/topology.h b/arch/blackfin/include/asm/topology.h similarity index 100% rename from include/asm-blackfin/topology.h rename to arch/blackfin/include/asm/topology.h diff --git a/include/asm-blackfin/trace.h b/arch/blackfin/include/asm/trace.h similarity index 100% rename from include/asm-blackfin/trace.h rename to arch/blackfin/include/asm/trace.h diff --git a/include/asm-blackfin/traps.h b/arch/blackfin/include/asm/traps.h similarity index 100% rename from include/asm-blackfin/traps.h rename to arch/blackfin/include/asm/traps.h diff --git a/include/asm-blackfin/types.h b/arch/blackfin/include/asm/types.h similarity index 100% rename from include/asm-blackfin/types.h rename to arch/blackfin/include/asm/types.h diff --git a/include/asm-blackfin/uaccess.h b/arch/blackfin/include/asm/uaccess.h similarity index 100% rename from include/asm-blackfin/uaccess.h rename to arch/blackfin/include/asm/uaccess.h diff --git a/include/asm-blackfin/ucontext.h b/arch/blackfin/include/asm/ucontext.h similarity index 100% rename from include/asm-blackfin/ucontext.h rename to arch/blackfin/include/asm/ucontext.h diff --git a/include/asm-blackfin/unaligned.h b/arch/blackfin/include/asm/unaligned.h similarity index 100% rename from include/asm-blackfin/unaligned.h rename to arch/blackfin/include/asm/unaligned.h diff --git a/include/asm-blackfin/unistd.h b/arch/blackfin/include/asm/unistd.h similarity index 100% rename from include/asm-blackfin/unistd.h rename to arch/blackfin/include/asm/unistd.h diff --git a/include/asm-blackfin/user.h b/arch/blackfin/include/asm/user.h similarity index 100% rename from include/asm-blackfin/user.h rename to arch/blackfin/include/asm/user.h diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 31bd9bf3efa..faea88ebb2e 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -32,7 +32,7 @@ #include #include -#include +#include #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 .section .l1.text diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index c3334cc5bcb..28c48619120 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -31,8 +31,8 @@ #include #include #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include -#include +#include +#include #endif .section .l1.text diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h similarity index 100% rename from include/asm-blackfin/mach-bf527/anomaly.h rename to arch/blackfin/mach-bf527/include/mach/anomaly.h diff --git a/include/asm-blackfin/mach-bf527/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h similarity index 100% rename from include/asm-blackfin/mach-bf527/bf527.h rename to arch/blackfin/mach-bf527/include/mach/bf527.h diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h similarity index 100% rename from include/asm-blackfin/mach-bf527/bfin_serial_5xx.h rename to arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h similarity index 100% rename from include/asm-blackfin/mach-bf527/bfin_sir.h rename to arch/blackfin/mach-bf527/include/mach/bfin_sir.h diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h similarity index 100% rename from include/asm-blackfin/mach-bf527/blackfin.h rename to arch/blackfin/mach-bf527/include/mach/blackfin.h diff --git a/include/asm-blackfin/mach-bf527/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h similarity index 96% rename from include/asm-blackfin/mach-bf527/cdefBF522.h rename to arch/blackfin/mach-bf527/include/mach/cdefBF522.h index 52c06494b88..663c2bbdfd9 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h @@ -36,7 +36,7 @@ #include "defBF522.h" /* include core specific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h similarity index 99% rename from include/asm-blackfin/mach-bf527/cdefBF525.h rename to arch/blackfin/mach-bf527/include/mach/cdefBF525.h index 2cc67e4b4d8..00377eb59b7 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h @@ -36,7 +36,7 @@ #include "defBF525.h" /* include core specific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h similarity index 99% rename from include/asm-blackfin/mach-bf527/cdefBF527.h rename to arch/blackfin/mach-bf527/include/mach/cdefBF527.h index 5bd1a860174..fca8db70811 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h @@ -36,7 +36,7 @@ #include "defBF527.h" /* include core specific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h similarity index 99% rename from include/asm-blackfin/mach-bf527/cdefBF52x_base.h rename to arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h index 9dbdbec8ea1..9a814b9a12b 100644 --- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h @@ -37,7 +37,7 @@ #include "defBF52x_base.h" /* Include core specific register pointer definitions */ -#include +#include /* ==== begin from cdefBF534.h ==== */ diff --git a/include/asm-blackfin/mach-bf527/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h similarity index 96% rename from include/asm-blackfin/mach-bf527/defBF522.h rename to arch/blackfin/mach-bf527/include/mach/defBF522.h index 9671d8f2c5e..0a8cdcdf0b4 100644 --- a/include/asm-blackfin/mach-bf527/defBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -32,7 +32,7 @@ #define _DEF_BF522_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ diff --git a/include/asm-blackfin/mach-bf527/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h similarity index 99% rename from include/asm-blackfin/mach-bf527/defBF525.h rename to arch/blackfin/mach-bf527/include/mach/defBF525.h index 6a375a084ac..5cd7576fef7 100644 --- a/include/asm-blackfin/mach-bf527/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -32,7 +32,7 @@ #define _DEF_BF525_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h similarity index 99% rename from include/asm-blackfin/mach-bf527/defBF527.h rename to arch/blackfin/mach-bf527/include/mach/defBF527.h index f1a70db70cb..f040f364afa 100644 --- a/include/asm-blackfin/mach-bf527/defBF527.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h @@ -32,7 +32,7 @@ #define _DEF_BF527_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h similarity index 100% rename from include/asm-blackfin/mach-bf527/defBF52x_base.h rename to arch/blackfin/mach-bf527/include/mach/defBF52x_base.h diff --git a/include/asm-blackfin/mach-bf527/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h similarity index 100% rename from include/asm-blackfin/mach-bf527/dma.h rename to arch/blackfin/mach-bf527/include/mach/dma.h diff --git a/include/asm-blackfin/mach-bf527/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h similarity index 100% rename from include/asm-blackfin/mach-bf527/irq.h rename to arch/blackfin/mach-bf527/include/mach/irq.h diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h similarity index 100% rename from include/asm-blackfin/mach-bf527/mem_init.h rename to arch/blackfin/mach-bf527/include/mach/mem_init.h diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h similarity index 100% rename from include/asm-blackfin/mach-bf527/mem_map.h rename to arch/blackfin/mach-bf527/include/mach/mem_map.h diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h similarity index 100% rename from include/asm-blackfin/mach-bf527/portmux.h rename to arch/blackfin/mach-bf527/include/mach/portmux.h diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index d59db86195b..01b2b7ead5a 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -31,8 +31,8 @@ #include #include #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include -#include +#include +#include #endif .section .l1.text diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h similarity index 100% rename from include/asm-blackfin/mach-bf533/anomaly.h rename to arch/blackfin/mach-bf533/include/mach/anomaly.h diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h similarity index 100% rename from include/asm-blackfin/mach-bf533/bf533.h rename to arch/blackfin/mach-bf533/include/mach/bf533.h diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h similarity index 100% rename from include/asm-blackfin/mach-bf533/bfin_serial_5xx.h rename to arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h similarity index 100% rename from include/asm-blackfin/mach-bf533/bfin_sir.h rename to arch/blackfin/mach-bf533/include/mach/bfin_sir.h diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h similarity index 100% rename from include/asm-blackfin/mach-bf533/blackfin.h rename to arch/blackfin/mach-bf533/include/mach/blackfin.h diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h similarity index 99% rename from include/asm-blackfin/mach-bf533/cdefBF532.h rename to arch/blackfin/mach-bf533/include/mach/cdefBF532.h index 154655452d4..3d8978a52c1 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h @@ -37,7 +37,7 @@ #include "defBF532.h" /*include core specific register pointer definitions*/ -#include +#include #include diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h similarity index 99% rename from include/asm-blackfin/mach-bf533/defBF532.h rename to arch/blackfin/mach-bf533/include/mach/defBF532.h index 0ab4dd7494c..7f4633223e6 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h @@ -48,7 +48,7 @@ #define _DEF_BF532_H /* include all Core registers and bit definitions */ -#include +#include /*********************************************************************************** */ /* System MMR Register Map */ diff --git a/include/asm-blackfin/mach-bf533/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h similarity index 100% rename from include/asm-blackfin/mach-bf533/dma.h rename to arch/blackfin/mach-bf533/include/mach/dma.h diff --git a/include/asm-blackfin/mach-bf533/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h similarity index 100% rename from include/asm-blackfin/mach-bf533/irq.h rename to arch/blackfin/mach-bf533/include/mach/irq.h diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h similarity index 100% rename from include/asm-blackfin/mach-bf533/mem_init.h rename to arch/blackfin/mach-bf533/include/mach/mem_init.h diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h similarity index 100% rename from include/asm-blackfin/mach-bf533/mem_map.h rename to arch/blackfin/mach-bf533/include/mach/mem_map.h diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h similarity index 100% rename from include/asm-blackfin/mach-bf533/portmux.h rename to arch/blackfin/mach-bf533/include/mach/portmux.h diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 64e0287ab26..12eb5cc571d 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -31,8 +31,8 @@ #include #include #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include -#include +#include +#include #endif .section .l1.text diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h similarity index 100% rename from include/asm-blackfin/mach-bf537/anomaly.h rename to arch/blackfin/mach-bf537/include/mach/anomaly.h diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h similarity index 100% rename from include/asm-blackfin/mach-bf537/bf537.h rename to arch/blackfin/mach-bf537/include/mach/bf537.h diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h similarity index 100% rename from include/asm-blackfin/mach-bf537/bfin_serial_5xx.h rename to arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h similarity index 100% rename from include/asm-blackfin/mach-bf537/bfin_sir.h rename to arch/blackfin/mach-bf537/include/mach/bfin_sir.h diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h similarity index 100% rename from include/asm-blackfin/mach-bf537/blackfin.h rename to arch/blackfin/mach-bf537/include/mach/blackfin.h diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h similarity index 99% rename from include/asm-blackfin/mach-bf537/cdefBF534.h rename to arch/blackfin/mach-bf537/include/mach/cdefBF534.h index 82de526f809..88d491cd9f3 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h @@ -38,7 +38,7 @@ #include "defBF534.h" /* Include core specific register pointer definitions */ -#include +#include #include diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h similarity index 100% rename from include/asm-blackfin/mach-bf537/cdefBF537.h rename to arch/blackfin/mach-bf537/include/mach/cdefBF537.h diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h similarity index 99% rename from include/asm-blackfin/mach-bf537/defBF534.h rename to arch/blackfin/mach-bf537/include/mach/defBF534.h index d0d80d3152b..a3227f9003f 100644 --- a/include/asm-blackfin/mach-bf537/defBF534.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h @@ -32,7 +32,7 @@ #define _DEF_BF534_H /* Include all Core registers and bit definitions */ -#include +#include /************************************************************************************ ** System MMR Register Map diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h similarity index 99% rename from include/asm-blackfin/mach-bf537/defBF537.h rename to arch/blackfin/mach-bf537/include/mach/defBF537.h index abde24c6d3b..3d6c83e31b1 100644 --- a/include/asm-blackfin/mach-bf537/defBF537.h +++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h @@ -33,7 +33,7 @@ #define _DEF_BF537_H /* Include all Core registers and bit definitions*/ -#include +#include /* Include all MMR and bit defines common to BF534 */ #include "defBF534.h" diff --git a/include/asm-blackfin/mach-bf537/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h similarity index 100% rename from include/asm-blackfin/mach-bf537/dma.h rename to arch/blackfin/mach-bf537/include/mach/dma.h diff --git a/include/asm-blackfin/mach-bf537/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h similarity index 100% rename from include/asm-blackfin/mach-bf537/irq.h rename to arch/blackfin/mach-bf537/include/mach/irq.h diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h similarity index 100% rename from include/asm-blackfin/mach-bf537/mem_init.h rename to arch/blackfin/mach-bf537/include/mach/mem_init.h diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h similarity index 100% rename from include/asm-blackfin/mach-bf537/mem_map.h rename to arch/blackfin/mach-bf537/include/mach/mem_map.h diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h similarity index 100% rename from include/asm-blackfin/mach-bf537/portmux.h rename to arch/blackfin/mach-bf537/include/mach/portmux.h diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 58abbed0a22..ce934ee174e 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -45,7 +45,7 @@ #include #include #include -#include +#include #include #include #include @@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548"; #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) -#include +#include static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { .width = 480, diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 0d6333ada1d..39357693046 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -48,7 +48,7 @@ #include #include #include -#include +#include #include #include @@ -106,7 +106,7 @@ arch_initcall(bfin_isp1761_init); #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) -#include +#include static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { .width = 480, diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index e3000f70a26..4d5cfeacb12 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,8 +31,8 @@ #include #include #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include -#include +#include +#include #endif .section .l1.text diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h similarity index 100% rename from include/asm-blackfin/mach-bf548/anomaly.h rename to arch/blackfin/mach-bf548/include/mach/anomaly.h diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h similarity index 100% rename from include/asm-blackfin/mach-bf548/bf548.h rename to arch/blackfin/mach-bf548/include/mach/bf548.h diff --git a/include/asm-blackfin/mach-bf548/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h similarity index 100% rename from include/asm-blackfin/mach-bf548/bf54x-lq043.h rename to arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h similarity index 100% rename from include/asm-blackfin/mach-bf548/bf54x_keys.h rename to arch/blackfin/mach-bf548/include/mach/bf54x_keys.h diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h similarity index 100% rename from include/asm-blackfin/mach-bf548/bfin_serial_5xx.h rename to arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h similarity index 100% rename from include/asm-blackfin/mach-bf548/bfin_sir.h rename to arch/blackfin/mach-bf548/include/mach/bfin_sir.h diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h similarity index 100% rename from include/asm-blackfin/mach-bf548/blackfin.h rename to arch/blackfin/mach-bf548/include/mach/blackfin.h diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h similarity index 99% rename from include/asm-blackfin/mach-bf548/cdefBF542.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF542.h index 60b9f77576f..07aefb9ed79 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h @@ -35,7 +35,7 @@ #include "defBF542.h" /* include core sbfin_read_()ecific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h similarity index 99% rename from include/asm-blackfin/mach-bf548/cdefBF544.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF544.h index ea9b4ab496f..431a6927899 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h @@ -35,7 +35,7 @@ #include "defBF544.h" /* include core sbfin_read_()ecific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h similarity index 99% rename from include/asm-blackfin/mach-bf548/cdefBF547.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF547.h index ba716277c00..93376e90dfc 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h @@ -35,7 +35,7 @@ #include "defBF548.h" /* include core sbfin_read_()ecific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h similarity index 99% rename from include/asm-blackfin/mach-bf548/cdefBF548.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF548.h index ae971ebff6a..9cd74384136 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h @@ -35,7 +35,7 @@ #include "defBF548.h" /* include core sbfin_read_()ecific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h similarity index 99% rename from include/asm-blackfin/mach-bf548/cdefBF549.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF549.h index 92d07d96199..ead360b69de 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h @@ -35,7 +35,7 @@ #include "defBF549.h" /* include core sbfin_read_()ecific register pointer definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h similarity index 100% rename from include/asm-blackfin/mach-bf548/cdefBF54x_base.h rename to arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h similarity index 99% rename from include/asm-blackfin/mach-bf548/defBF542.h rename to arch/blackfin/mach-bf548/include/mach/defBF542.h index a7c809f29ed..b1316541b8d 100644 --- a/include/asm-blackfin/mach-bf548/defBF542.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h @@ -32,7 +32,7 @@ #define _DEF_BF542_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h similarity index 99% rename from include/asm-blackfin/mach-bf548/defBF544.h rename to arch/blackfin/mach-bf548/include/mach/defBF544.h index b8b9870e269..c2c785bdc5f 100644 --- a/include/asm-blackfin/mach-bf548/defBF544.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h @@ -32,7 +32,7 @@ #define _DEF_BF544_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h similarity index 99% rename from include/asm-blackfin/mach-bf548/defBF547.h rename to arch/blackfin/mach-bf548/include/mach/defBF547.h index 3a3a18ebb10..661f0d877bd 100644 --- a/include/asm-blackfin/mach-bf548/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -32,7 +32,7 @@ #define _DEF_BF548_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h similarity index 99% rename from include/asm-blackfin/mach-bf548/defBF548.h rename to arch/blackfin/mach-bf548/include/mach/defBF548.h index 1d7c96edb03..85d4bade911 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h @@ -32,7 +32,7 @@ #define _DEF_BF548_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h similarity index 99% rename from include/asm-blackfin/mach-bf548/defBF549.h rename to arch/blackfin/mach-bf548/include/mach/defBF549.h index fcb72b41e00..09673454164 100644 --- a/include/asm-blackfin/mach-bf548/defBF549.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h @@ -32,7 +32,7 @@ #define _DEF_BF549_H /* Include all Core registers and bit definitions */ -#include +#include /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h similarity index 100% rename from include/asm-blackfin/mach-bf548/defBF54x_base.h rename to arch/blackfin/mach-bf548/include/mach/defBF54x_base.h diff --git a/include/asm-blackfin/mach-bf548/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h similarity index 100% rename from include/asm-blackfin/mach-bf548/dma.h rename to arch/blackfin/mach-bf548/include/mach/dma.h diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h similarity index 100% rename from include/asm-blackfin/mach-bf548/gpio.h rename to arch/blackfin/mach-bf548/include/mach/gpio.h diff --git a/include/asm-blackfin/mach-bf548/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h similarity index 100% rename from include/asm-blackfin/mach-bf548/irq.h rename to arch/blackfin/mach-bf548/include/mach/irq.h diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h similarity index 100% rename from include/asm-blackfin/mach-bf548/mem_init.h rename to arch/blackfin/mach-bf548/include/mach/mem_init.h diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h similarity index 100% rename from include/asm-blackfin/mach-bf548/mem_map.h rename to arch/blackfin/mach-bf548/include/mach/mem_map.h diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h similarity index 100% rename from include/asm-blackfin/mach-bf548/portmux.h rename to arch/blackfin/mach-bf548/include/mach/portmux.h diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index c7a81e34703..75ea6a90582 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -31,8 +31,8 @@ #include #include #ifdef CONFIG_BFIN_KERNEL_CLOCK -#include -#include +#include +#include #endif .section .l1.text diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h similarity index 100% rename from include/asm-blackfin/mach-bf561/anomaly.h rename to arch/blackfin/mach-bf561/include/mach/anomaly.h diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h similarity index 100% rename from include/asm-blackfin/mach-bf561/bf561.h rename to arch/blackfin/mach-bf561/include/mach/bf561.h diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h similarity index 100% rename from include/asm-blackfin/mach-bf561/bfin_serial_5xx.h rename to arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h similarity index 100% rename from include/asm-blackfin/mach-bf561/bfin_sir.h rename to arch/blackfin/mach-bf561/include/mach/bfin_sir.h diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h similarity index 100% rename from include/asm-blackfin/mach-bf561/blackfin.h rename to arch/blackfin/mach-bf561/include/mach/blackfin.h diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h similarity index 99% rename from include/asm-blackfin/mach-bf561/cdefBF561.h rename to arch/blackfin/mach-bf561/include/mach/cdefBF561.h index b07ffccd66d..c14d63402e7 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h @@ -37,7 +37,7 @@ #include "defBF561.h" /*include core specific register pointer definitions*/ -#include +#include #include diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h similarity index 99% rename from include/asm-blackfin/mach-bf561/defBF561.h rename to arch/blackfin/mach-bf561/include/mach/defBF561.h index 1ab50e906fe..4eca2026bb9 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -37,7 +37,7 @@ #endif */ /* include all Core registers and bit definitions */ -#include +#include /*********************************************************************************** */ /* System MMR Register Map */ diff --git a/include/asm-blackfin/mach-bf561/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h similarity index 100% rename from include/asm-blackfin/mach-bf561/dma.h rename to arch/blackfin/mach-bf561/include/mach/dma.h diff --git a/include/asm-blackfin/mach-bf561/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h similarity index 100% rename from include/asm-blackfin/mach-bf561/irq.h rename to arch/blackfin/mach-bf561/include/mach/irq.h diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h similarity index 100% rename from include/asm-blackfin/mach-bf561/mem_init.h rename to arch/blackfin/mach-bf561/include/mach/mem_init.h diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h similarity index 100% rename from include/asm-blackfin/mach-bf561/mem_map.h rename to arch/blackfin/mach-bf561/include/mach/mem_map.h diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h similarity index 100% rename from include/asm-blackfin/mach-bf561/portmux.h rename to arch/blackfin/mach-bf561/include/mach/portmux.h diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 5986758b275..98133b968f7 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -28,8 +28,8 @@ */ #include -#include -#include +#include +#include #ifdef CONFIG_BFIN_KERNEL_CLOCK diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 838b0b2ce9a..ad5431e2cd0 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -6,7 +6,7 @@ #include #include -#include +#include #include .section .l1.text diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 117c01c2c6b..847c172a99e 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -43,7 +43,7 @@ #include #include -#include +#include #if defined(CONFIG_BFIN_SCRATCH_REG_RETN) # define EX_SCRATCH_REG RETN diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 7f752c87fe4..b27e59d3240 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -29,7 +29,7 @@ */ #include -#include +#include #include #include #include @@ -37,7 +37,7 @@ #include #include -#include +#include .extern _ret_from_exception diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index 6f227d3dbda..e348cfccc17 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -43,7 +43,7 @@ #include #include -#include +#include #define DRV_NAME "bf54x-keys" #define TIME_SCALE 100 /* 100 ns */ diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index efcd44344fb..4a0d30bed9f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -28,7 +28,7 @@ #endif #include -#include +#include #ifdef CONFIG_SERIAL_BFIN_DMA #include diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 6d5aa806777..7644ed24956 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -58,7 +58,7 @@ #include #include -#include +#include #define NO_BL_SUPPORT From a95ca3b2b9dee628ef57df38f0b263e5a4355953 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 27 Aug 2008 10:55:05 +0800 Subject: [PATCH 164/638] Blackfin arch: let PCI depend on BROKEN AFAIR there exists blackfin hardware with PCI support, but the support currently in the kernel fails to build starting with: ... CC drivers/pci/probe.o probe.c: In function 'pci_scan_slot': probe.c:1056: error: implicit declaration of function 'pcibios_scan_all_fns' make[3]: *** [drivers/pci/probe.o] Error 1 Signed-off-by: Adrian Bunk Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f64d25973a3..4154ff1101f 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -855,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" config PCI bool "PCI support" + depends on BROKEN help Support for PCI bus. From 93a1a5eb70be5cc14990b97ef2460212e32658dc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Aug 2008 07:56:43 +0200 Subject: [PATCH 165/638] Revert "ALSA: hda - Added model selection for iMac 24"" This reverts commit 3e0e469fa216ec70c93b1593821b759d19ee2e6b. The patch introduced a wrong detection of other intel Macs with ALC88* codec because they share the same PCI SSID (but have different codec subsystem-IDs). See http://lkml.org/lkml/2008/8/24/143 Reported-and-tested-by: Guillaume Chazarain Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 909f1c101c9..d6ec9eef291 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6197,7 +6197,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG), SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG), - SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24), SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */ SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG), From c1b362e3b4d331a63915b268a33207311a439d60 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 25 Aug 2008 15:06:35 -0700 Subject: [PATCH 166/638] x86: update defconfigs Enable some option commonly used by testers in defconfig, including some very common device drivers and network boot support. defconfig is still not meant to be a kitchen-sink configuration. Signed-off-by: H. Peter Anvin --- arch/x86/configs/i386_defconfig | 305 +++++++++++++++++------------- arch/x86/configs/x86_64_defconfig | 260 +++++++++++++++---------- 2 files changed, 336 insertions(+), 229 deletions(-) diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 4d73f53287b..104275e191a 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:59:02 2008 +# Linux kernel version: 2.6.27-rc4 +# Mon Aug 25 15:04:00 2008 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y -CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -53,6 +53,7 @@ CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup @@ -82,6 +83,7 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_NS=y # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set @@ -105,7 +107,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -132,27 +134,35 @@ CONFIG_MARKERS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -176,19 +186,17 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_X86_RDC321X is not set CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_MPSC is not set CONFIG_MCORE2=y # CONFIG_GENERIC_CPU is not set -# CONFIG_X86_GENERIC is not set +CONFIG_X86_GENERIC=y CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y -CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y @@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set +CONFIG_X86_REBOOTFIXUPS=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y @@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_NEED_NODE_MEMMAP_SIZE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - -# -# Memory hotplug is currently incompatible with Software Suspend -# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -# CONFIG_HIGHPTE is not set +CONFIG_HIGHPTE=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_X86_PAT is not set +# CONFIG_MTRR_SANITIZER is not set +CONFIG_X86_PAT=y CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y @@ -293,6 +295,7 @@ CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y +# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 @@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" @@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y @@ -395,8 +400,8 @@ CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y # CONFIG_PCI_GOOLPC is not set +CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y @@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y - -# -# Networking -# CONFIG_NET=y # @@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y @@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set @@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set @@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set # CONFIG_MSI_LAPTOP is not set +# CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=y # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set +CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set @@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set +CONFIG_PATA_MPIIX=y CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set @@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set +CONFIG_NE2K_PCI=y # CONFIG_8139CP is not set CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set @@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set +CONFIG_E1000E=y # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set +CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y # CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -# CONFIG_BNX2 is not set +CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set -# CONFIG_IWLWIFI is not set +# CONFIG_ATH9K is not set # CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWL4965 is not set +# CONFIG_IWLAGN is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set @@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set @@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_APANEL is not set @@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_INTEL is not set -# CONFIG_HW_RANDOM_AMD is not set +CONFIG_HW_RANDOM_INTEL=y +CONFIG_HW_RANDOM_AMD=y CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y CONFIG_NVRAM=y @@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set @@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_SCx200_ACB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set @@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y @@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set +# CONFIG_BACKLIGHT_MBP_NVIDIA is not set # # Display device support @@ -1489,15 +1539,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1515,20 +1557,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1603,36 +1639,14 @@ CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1668,6 +1682,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1691,6 +1706,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1712,6 +1728,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y @@ -1720,7 +1737,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1733,7 +1749,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1750,6 +1765,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1759,7 +1775,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_CLEVO_MAIL is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1805,6 +1823,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1837,11 +1856,13 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y -# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=y # # File systems @@ -1920,14 +1941,27 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -2001,9 +2035,9 @@ CONFIG_NLS_UTF8=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -2033,6 +2067,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -2043,23 +2078,32 @@ CONFIG_FRAME_POINTER=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SYSPROF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set -# CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set +CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +# CONFIG_MMIOTRACE is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2071,6 +2115,7 @@ CONFIG_IO_DELAY_0X80=y CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set +# CONFIG_OPTIMIZE_INLINING is not set # # Security options @@ -2080,7 +2125,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 @@ -2141,6 +2185,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -2151,7 +2199,7 @@ CONFIG_CRYPTO_SHA1=y # Ciphers # CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_586 is not set +CONFIG_CRYPTO_AES_586=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set @@ -2193,6 +2241,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index a4045242962..678c8acefe0 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:59:57 2008 +# Linux kernel version: 2.6.27-rc4 +# Mon Aug 25 14:40:46 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y -CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -53,6 +53,7 @@ CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y # CONFIG_KTIME_SCALAR is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup @@ -82,6 +83,7 @@ CONFIG_CGROUPS=y CONFIG_CGROUP_NS=y # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set @@ -105,7 +107,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y # CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -132,25 +134,33 @@ CONFIG_MARKERS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -175,20 +185,15 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y +CONFIG_X86_FIND_SMP_CONFIG=y +CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set -# CONFIG_X86_NUMAQ is not set -# CONFIG_X86_SUMMIT is not set -# CONFIG_X86_BIGSMP is not set -# CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_ES7000 is not set -# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set -CONFIG_MEMTEST_BOOTPARAM=y -CONFIG_MEMTEST_BOOTPARAM_VALUE=0 +# CONFIG_MEMTEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_GOOD_APIC=y +CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y @@ -234,8 +240,10 @@ CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y +CONFIG_AMD_IOMMU=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y +# CONFIG_MAXSMP is not set CONFIG_NR_CPUS=4 # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y @@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y +# CONFIG_MTRR_SANITIZER is not set # CONFIG_X86_PAT is not set CONFIG_EFI=y CONFIG_SECCOMP=y @@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" @@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y @@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y - -# -# Networking -# CONFIG_NET=y # @@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y @@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=y # # Rate control algorithm selection # -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_NONE is not set - -# -# Selecting 'y' for an algorithm will -# - -# -# build the algorithm into mac80211. -# -CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set -# CONFIG_MAC80211_DEBUG is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set @@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set @@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ASUS_LAPTOP is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_MSI_LAPTOP is not set +# CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_SGI_XP is not set +# CONFIG_HP_ILO is not set +# CONFIG_SGI_GRU is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=y # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set +CONFIG_PATA_SCH=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set @@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -965,6 +992,7 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set CONFIG_ATH5K=y # CONFIG_ATH5K_DEBUG is not set -# CONFIG_IWLWIFI is not set +# CONFIG_ATH9K is not set # CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWL4965 is not set +# CONFIG_IWLAGN is not set # CONFIG_IWL3945 is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set @@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set @@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_APANEL is not set @@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set # CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set @@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_I801=y -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set @@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y @@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set # CONFIG_BACKLIGHT_PROGEAR is not set +# CONFIG_BACKLIGHT_MBP_NVIDIA is not set # # Display device support @@ -1456,15 +1515,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1482,20 +1533,14 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1568,36 +1613,14 @@ CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1633,6 +1656,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1656,6 +1680,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1677,6 +1702,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y @@ -1685,7 +1711,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1698,7 +1723,6 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1715,6 +1739,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1724,7 +1749,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_CLEVO_MAIL is not set +# CONFIG_LEDS_PCA955X is not set # # LED Triggers @@ -1770,6 +1797,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1802,11 +1830,13 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_FIRMWARE_MEMMAP=y CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y -# CONFIG_ISCSI_IBFT_FIND is not set +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=y # # File systems @@ -1886,14 +1916,27 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1967,9 +2010,9 @@ CONFIG_NLS_UTF8=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1998,6 +2041,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -2008,11 +2052,20 @@ CONFIG_FRAME_POINTER=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SYSPROF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set -# CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set +CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y @@ -2023,8 +2076,8 @@ CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_NX_TEST=m -CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set +# CONFIG_MMIOTRACE is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 @@ -2036,6 +2089,7 @@ CONFIG_IO_DELAY_0X80=y CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set +# CONFIG_OPTIMIZE_INLINING is not set # # Security options @@ -2045,7 +2099,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 @@ -2106,6 +2159,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -2155,6 +2212,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set From 74870172824a78640ec4f03058d9bd35dfa08618 Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Wed, 27 Aug 2008 14:33:00 +0800 Subject: [PATCH 167/638] lockdep: fix invalid list_del_rcu in zap_class The problem is found during iwlagn driver testing on v2.6.27-rc4-176-gb8e6c91 kernel, but it turns out to be a lockdep bug. In our testing, we frequently load and unload the iwlagn driver (>50 times). Then the MAX_STACK_TRACE_ENTRIES is reached (expected behaviour?). The error message with the call trace is as below. BUG: MAX_STACK_TRACE_ENTRIES too low! turning off the locking correctness validator. Pid: 4895, comm: iwlagn Not tainted 2.6.27-rc4 #13 Call Trace: [] save_stack_trace+0x22/0x3e [] save_trace+0x8b/0x91 [] mark_lock+0x1b0/0x8fa [] __lock_acquire+0x5b9/0x716 [] ieee80211_sta_work+0x0/0x6ea [mac80211] [] lock_acquire+0x52/0x6b [] run_workqueue+0x97/0x1ed [] run_workqueue+0xe7/0x1ed [] run_workqueue+0x97/0x1ed [] worker_thread+0xd8/0xe3 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe3 [] kthread+0x47/0x73 [] trace_hardirqs_on_thunk+0x3a/0x3f [] child_rip+0xa/0x11 [] restore_args+0x0/0x30 [] finish_task_switch+0x0/0xcc [] kthread+0x0/0x73 [] child_rip+0x0/0x11 Although the above is harmless, when the ilwagn module is removed later lockdep will trigger a kernel oops as below. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] zap_class+0x24/0x82 PGD 73128067 PUD 7448c067 PMD 0 Oops: 0002 [1] SMP CPU 0 Modules linked in: rfcomm l2cap bluetooth autofs4 sunrpc nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand acpi_cpufreq dm_mirror dm_log dm_multipath dm_mod snd_hda_intel sr_mod snd_seq_dummy snd_seq_oss snd_seq_midi_event battery snd_seq snd_seq_device cdrom button snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc e1000e snd_hwdep sg iTCO_wdt iTCO_vendor_support ac pcspkr i2c_i801 i2c_core snd soundcore video output ata_piix ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: mac80211] Pid: 4941, comm: modprobe Not tainted 2.6.27-rc4 #10 RIP: 0010:[] [] zap_class+0x24/0x82 RSP: 0000:ffff88007bcb3eb0 EFLAGS: 00010046 RAX: 0000000000068ee8 RBX: ffffffff8192a0a0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000001dfb RDI: ffffffff816e70b0 RBP: ffffffffa00cd000 R08: ffffffff816818f8 R09: ffff88007c923558 R10: ffffe20002ad2408 R11: ffffffff811028ec R12: ffffffff8192a0a0 R13: 000000000002bd90 R14: 0000000000000000 R15: 0000000000000296 FS: 00007f9d1cee56f0(0000) GS:ffffffff814a58c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000073047000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 4941, threadinfo ffff88007bcb2000, task ffff8800758d1fc0) Stack: ffffffff81057376 0000000000000000 ffffffffa00f7b00 0000000000000000 0000000000000080 0000000000618278 00007fff24f16720 0000000000000000 ffffffff8105d37a ffffffffa00f7b00 ffffffff8105d591 313132303863616d Call Trace: [] ? lockdep_free_key_range+0x61/0xf5 [] ? free_module+0xd4/0xe4 [] ? sys_delete_module+0x1de/0x1f9 [] ? audit_syscall_entry+0x12d/0x160 [] ? system_call_fastpath+0x16/0x1b Code: b2 00 01 00 00 00 c3 31 f6 49 c7 c0 10 8a 61 81 eb 32 49 39 38 75 26 48 98 48 6b c0 38 48 8b 90 08 8a 61 81 48 8b 88 00 8a 61 81 <48> 89 51 08 48 89 0a 48 c7 80 08 8a 61 81 00 02 20 00 48 ff c6 RIP [] zap_class+0x24/0x82 RSP CR2: 0000000000000008 ---[ end trace a1297e0c4abb0f2e ]--- The root cause for this oops is in add_lock_to_list() when save_trace() fails due to MAX_STACK_TRACE_ENTRIES is reached, entry->class is assigned but entry is never added into any lock list. This makes the list_del_rcu() in zap_class() oops later when the module is unloaded. This patch fixes the problem by assigning entry->class after save_trace() returns success. Signed-off-by: Zhu Yi Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index b5db51d2803..dbda475b13b 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -875,11 +875,11 @@ static int add_lock_to_list(struct lock_class *class, struct lock_class *this, if (!entry) return 0; - entry->class = this; - entry->distance = distance; if (!save_trace(&entry->trace)) return 0; + entry->class = this; + entry->distance = distance; /* * Since we never remove from the dependency list, the list can * be walked lockless by other CPUs, it's only allocation From 2633f0e57b1127f4060d70bf460140dc9bb19386 Mon Sep 17 00:00:00 2001 From: Steve VanDeBogart Date: Tue, 26 Aug 2008 15:14:36 -0700 Subject: [PATCH 168/638] exit signals: use of uninitialized field notify_count task->signal->notify_count is only initialized if task->signal->group_exit_task is not NULL. Reorder a conditional so that uninitialised memory is not used. Found by Valgrind. Signed-off-by: Steve VanDeBogart Signed-off-by: Ingo Molnar --- kernel/exit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index 38ec4063014..75c64738763 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -918,8 +918,8 @@ static void exit_notify(struct task_struct *tsk, int group_dead) /* mt-exec, de_thread() is waiting for us */ if (thread_group_leader(tsk) && - tsk->signal->notify_count < 0 && - tsk->signal->group_exit_task) + tsk->signal->group_exit_task && + tsk->signal->notify_count < 0) wake_up_process(tsk->signal->group_exit_task); write_unlock_irq(&tasklist_lock); From abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 16 Aug 2008 14:10:05 +0900 Subject: [PATCH 169/638] block: move cmdfilter from gendisk to request_queue cmd_filter works only for the block layer SG_IO with SCSI block devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI character devices (such as st). We hit a kernel crash with them. The problem is that cmd_filter code accesses to gendisk (having struct blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only SCSI block device files. With character device files, inode->i_bdev leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter isn't safe. SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be independent on any protocols. We shouldn't change ULDs to expose their gendisk. This patch moves struct blk_scsi_cmd_filter from gendisk to request_queue, a common object, which eveyone can access to. The user interface doesn't change; users can change the filters via /sys/block/. gendisk has a pointer to request_queue so the cmd_filter code accesses to struct blk_scsi_cmd_filter. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- block/blk-core.c | 2 + block/bsg.c | 44 ++++----------- block/cmd-filter.c | 118 +++-------------------------------------- block/scsi_ioctl.c | 94 ++++++++++++++++++++++++++++++-- drivers/scsi/sg.c | 11 +++- include/linux/blkdev.h | 16 ++++-- include/linux/genhd.h | 10 ---- 7 files changed, 132 insertions(+), 163 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 4889eb86a39..2cba5ef97b2 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -582,6 +582,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) q->sg_reserved_size = INT_MAX; + blk_set_cmd_filter_defaults(&q->cmd_filter); + /* * all done */ diff --git a/block/bsg.c b/block/bsg.c index 5a68b09a69b..0aae8d7ba99 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -45,8 +45,6 @@ struct bsg_device { char name[BUS_ID_SIZE]; int max_queue; unsigned long flags; - struct blk_scsi_cmd_filter *cmd_filter; - mode_t *f_mode; }; enum { @@ -174,7 +172,8 @@ unlock: } static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq, - struct sg_io_v4 *hdr, struct bsg_device *bd) + struct sg_io_v4 *hdr, struct bsg_device *bd, + int has_write_perm) { if (hdr->request_len > BLK_MAX_CDB) { rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL); @@ -187,8 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq, return -EFAULT; if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) { - if (blk_cmd_filter_verify_command(bd->cmd_filter, rq->cmd, - bd->f_mode)) + if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm)) return -EPERM; } else if (!capable(CAP_SYS_RAWIO)) return -EPERM; @@ -244,7 +242,7 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw) * map sg_io_v4 to a request. */ static struct request * -bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr) +bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, int has_write_perm) { struct request_queue *q = bd->queue; struct request *rq, *next_rq = NULL; @@ -266,7 +264,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr) rq = blk_get_request(q, rw, GFP_KERNEL); if (!rq) return ERR_PTR(-ENOMEM); - ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd); + ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd, has_write_perm); if (ret) goto out; @@ -568,25 +566,6 @@ static inline void bsg_set_block(struct bsg_device *bd, struct file *file) set_bit(BSG_F_BLOCK, &bd->flags); } -static void bsg_set_cmd_filter(struct bsg_device *bd, - struct file *file) -{ - struct inode *inode; - struct gendisk *disk; - - if (!file) - return; - - inode = file->f_dentry->d_inode; - if (!inode) - return; - - disk = inode->i_bdev->bd_disk; - - bd->cmd_filter = &disk->cmd_filter; - bd->f_mode = &file->f_mode; -} - /* * Check if the error is a "real" error that we should return. */ @@ -608,7 +587,6 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) dprintk("%s: read %Zd bytes\n", bd->name, count); bsg_set_block(bd, file); - bsg_set_cmd_filter(bd, file); bytes_read = 0; ret = __bsg_read(buf, count, bd, NULL, &bytes_read); @@ -621,7 +599,7 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) } static int __bsg_write(struct bsg_device *bd, const char __user *buf, - size_t count, ssize_t *bytes_written) + size_t count, ssize_t *bytes_written, int has_write_perm) { struct bsg_command *bc; struct request *rq; @@ -652,7 +630,7 @@ static int __bsg_write(struct bsg_device *bd, const char __user *buf, /* * get a request, fill in the blanks, and add to request queue */ - rq = bsg_map_hdr(bd, &bc->hdr); + rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm); if (IS_ERR(rq)) { ret = PTR_ERR(rq); rq = NULL; @@ -683,10 +661,11 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) dprintk("%s: write %Zd bytes\n", bd->name, count); bsg_set_block(bd, file); - bsg_set_cmd_filter(bd, file); bytes_written = 0; - ret = __bsg_write(bd, buf, count, &bytes_written); + ret = __bsg_write(bd, buf, count, &bytes_written, + file->f_mode & FMODE_WRITE); + *ppos = bytes_written; /* @@ -792,7 +771,6 @@ static struct bsg_device *bsg_add_device(struct inode *inode, bd->queue = rq; bsg_set_block(bd, file); - bsg_set_cmd_filter(bd, file); atomic_set(&bd->ref_count, 1); mutex_lock(&bsg_mutex); @@ -943,7 +921,7 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (copy_from_user(&hdr, uarg, sizeof(hdr))) return -EFAULT; - rq = bsg_map_hdr(bd, &hdr); + rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE); if (IS_ERR(rq)) return PTR_ERR(rq); diff --git a/block/cmd-filter.c b/block/cmd-filter.c index eec4404fd35..c705c33361a 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -27,8 +27,8 @@ #include #include -int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter, - unsigned char *cmd, mode_t *f_mode) +int blk_verify_command(struct blk_scsi_cmd_filter *filter, + unsigned char *cmd, int has_write_perm) { /* root can do any command. */ if (capable(CAP_SYS_RAWIO)) @@ -43,30 +43,11 @@ int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter, return 0; /* Write-safe commands require a writable open */ - if (test_bit(cmd[0], filter->write_ok) && (*f_mode & FMODE_WRITE)) + if (test_bit(cmd[0], filter->write_ok) && has_write_perm) return 0; return -EPERM; } -EXPORT_SYMBOL(blk_cmd_filter_verify_command); - -int blk_verify_command(struct file *file, unsigned char *cmd) -{ - struct gendisk *disk; - struct inode *inode; - - if (!file) - return -EINVAL; - - inode = file->f_dentry->d_inode; - if (!inode) - return -EINVAL; - - disk = inode->i_bdev->bd_disk; - - return blk_cmd_filter_verify_command(&disk->cmd_filter, - cmd, &file->f_mode); -} EXPORT_SYMBOL(blk_verify_command); /* and now, the sysfs stuff */ @@ -219,114 +200,27 @@ static struct kobj_type rcf_ktype = { .default_attrs = default_attrs, }; -#ifndef MAINTENANCE_IN_CMD -#define MAINTENANCE_IN_CMD 0xa3 -#endif - -static void rcf_set_defaults(struct blk_scsi_cmd_filter *filter) -{ - /* Basic read-only commands */ - __set_bit(TEST_UNIT_READY, filter->read_ok); - __set_bit(REQUEST_SENSE, filter->read_ok); - __set_bit(READ_6, filter->read_ok); - __set_bit(READ_10, filter->read_ok); - __set_bit(READ_12, filter->read_ok); - __set_bit(READ_16, filter->read_ok); - __set_bit(READ_BUFFER, filter->read_ok); - __set_bit(READ_DEFECT_DATA, filter->read_ok); - __set_bit(READ_CAPACITY, filter->read_ok); - __set_bit(READ_LONG, filter->read_ok); - __set_bit(INQUIRY, filter->read_ok); - __set_bit(MODE_SENSE, filter->read_ok); - __set_bit(MODE_SENSE_10, filter->read_ok); - __set_bit(LOG_SENSE, filter->read_ok); - __set_bit(START_STOP, filter->read_ok); - __set_bit(GPCMD_VERIFY_10, filter->read_ok); - __set_bit(VERIFY_16, filter->read_ok); - __set_bit(REPORT_LUNS, filter->read_ok); - __set_bit(SERVICE_ACTION_IN, filter->read_ok); - __set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok); - __set_bit(MAINTENANCE_IN_CMD, filter->read_ok); - __set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok); - - /* Audio CD commands */ - __set_bit(GPCMD_PLAY_CD, filter->read_ok); - __set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok); - __set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok); - __set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok); - __set_bit(GPCMD_PAUSE_RESUME, filter->read_ok); - - /* CD/DVD data reading */ - __set_bit(GPCMD_READ_CD, filter->read_ok); - __set_bit(GPCMD_READ_CD_MSF, filter->read_ok); - __set_bit(GPCMD_READ_DISC_INFO, filter->read_ok); - __set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok); - __set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok); - __set_bit(GPCMD_READ_HEADER, filter->read_ok); - __set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok); - __set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok); - __set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok); - __set_bit(GPCMD_REPORT_KEY, filter->read_ok); - __set_bit(GPCMD_SCAN, filter->read_ok); - __set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok); - __set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok); - __set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok); - __set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok); - __set_bit(GPCMD_SEEK, filter->read_ok); - __set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok); - - /* Basic writing commands */ - __set_bit(WRITE_6, filter->write_ok); - __set_bit(WRITE_10, filter->write_ok); - __set_bit(WRITE_VERIFY, filter->write_ok); - __set_bit(WRITE_12, filter->write_ok); - __set_bit(WRITE_VERIFY_12, filter->write_ok); - __set_bit(WRITE_16, filter->write_ok); - __set_bit(WRITE_LONG, filter->write_ok); - __set_bit(WRITE_LONG_2, filter->write_ok); - __set_bit(ERASE, filter->write_ok); - __set_bit(GPCMD_MODE_SELECT_10, filter->write_ok); - __set_bit(MODE_SELECT, filter->write_ok); - __set_bit(LOG_SELECT, filter->write_ok); - __set_bit(GPCMD_BLANK, filter->write_ok); - __set_bit(GPCMD_CLOSE_TRACK, filter->write_ok); - __set_bit(GPCMD_FLUSH_CACHE, filter->write_ok); - __set_bit(GPCMD_FORMAT_UNIT, filter->write_ok); - __set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok); - __set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok); - __set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok); - __set_bit(GPCMD_SEND_EVENT, filter->write_ok); - __set_bit(GPCMD_SEND_KEY, filter->write_ok); - __set_bit(GPCMD_SEND_OPC, filter->write_ok); - __set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok); - __set_bit(GPCMD_SET_SPEED, filter->write_ok); - __set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok); - __set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok); - __set_bit(GPCMD_SET_STREAMING, filter->write_ok); -} - int blk_register_filter(struct gendisk *disk) { int ret; - struct blk_scsi_cmd_filter *filter = &disk->cmd_filter; + struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter; struct kobject *parent = kobject_get(disk->holder_dir->parent); if (!parent) return -ENODEV; ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, parent, - "%s", "cmd_filter"); + "%s", "cmd_filter"); if (ret < 0) return ret; - rcf_set_defaults(filter); return 0; } void blk_unregister_filter(struct gendisk *disk) { - struct blk_scsi_cmd_filter *filter = &disk->cmd_filter; + struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter; kobject_put(&filter->kobj); kobject_put(disk->holder_dir->parent); diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 12a5182173f..d01ef5ee427 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -105,12 +105,96 @@ static int sg_emulated_host(struct request_queue *q, int __user *p) return put_user(1, p); } +void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter) +{ + /* Basic read-only commands */ + __set_bit(TEST_UNIT_READY, filter->read_ok); + __set_bit(REQUEST_SENSE, filter->read_ok); + __set_bit(READ_6, filter->read_ok); + __set_bit(READ_10, filter->read_ok); + __set_bit(READ_12, filter->read_ok); + __set_bit(READ_16, filter->read_ok); + __set_bit(READ_BUFFER, filter->read_ok); + __set_bit(READ_DEFECT_DATA, filter->read_ok); + __set_bit(READ_CAPACITY, filter->read_ok); + __set_bit(READ_LONG, filter->read_ok); + __set_bit(INQUIRY, filter->read_ok); + __set_bit(MODE_SENSE, filter->read_ok); + __set_bit(MODE_SENSE_10, filter->read_ok); + __set_bit(LOG_SENSE, filter->read_ok); + __set_bit(START_STOP, filter->read_ok); + __set_bit(GPCMD_VERIFY_10, filter->read_ok); + __set_bit(VERIFY_16, filter->read_ok); + __set_bit(REPORT_LUNS, filter->read_ok); + __set_bit(SERVICE_ACTION_IN, filter->read_ok); + __set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok); + __set_bit(MAINTENANCE_IN, filter->read_ok); + __set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok); + + /* Audio CD commands */ + __set_bit(GPCMD_PLAY_CD, filter->read_ok); + __set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok); + __set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok); + __set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok); + __set_bit(GPCMD_PAUSE_RESUME, filter->read_ok); + + /* CD/DVD data reading */ + __set_bit(GPCMD_READ_CD, filter->read_ok); + __set_bit(GPCMD_READ_CD_MSF, filter->read_ok); + __set_bit(GPCMD_READ_DISC_INFO, filter->read_ok); + __set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok); + __set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok); + __set_bit(GPCMD_READ_HEADER, filter->read_ok); + __set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok); + __set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok); + __set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok); + __set_bit(GPCMD_REPORT_KEY, filter->read_ok); + __set_bit(GPCMD_SCAN, filter->read_ok); + __set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok); + __set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok); + __set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok); + __set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok); + __set_bit(GPCMD_SEEK, filter->read_ok); + __set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok); + + /* Basic writing commands */ + __set_bit(WRITE_6, filter->write_ok); + __set_bit(WRITE_10, filter->write_ok); + __set_bit(WRITE_VERIFY, filter->write_ok); + __set_bit(WRITE_12, filter->write_ok); + __set_bit(WRITE_VERIFY_12, filter->write_ok); + __set_bit(WRITE_16, filter->write_ok); + __set_bit(WRITE_LONG, filter->write_ok); + __set_bit(WRITE_LONG_2, filter->write_ok); + __set_bit(ERASE, filter->write_ok); + __set_bit(GPCMD_MODE_SELECT_10, filter->write_ok); + __set_bit(MODE_SELECT, filter->write_ok); + __set_bit(LOG_SELECT, filter->write_ok); + __set_bit(GPCMD_BLANK, filter->write_ok); + __set_bit(GPCMD_CLOSE_TRACK, filter->write_ok); + __set_bit(GPCMD_FLUSH_CACHE, filter->write_ok); + __set_bit(GPCMD_FORMAT_UNIT, filter->write_ok); + __set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok); + __set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok); + __set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok); + __set_bit(GPCMD_SEND_EVENT, filter->write_ok); + __set_bit(GPCMD_SEND_KEY, filter->write_ok); + __set_bit(GPCMD_SEND_OPC, filter->write_ok); + __set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok); + __set_bit(GPCMD_SET_SPEED, filter->write_ok); + __set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok); + __set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok); + __set_bit(GPCMD_SET_STREAMING, filter->write_ok); +} +EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults); + static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, struct sg_io_hdr *hdr, struct file *file) { if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len)) return -EFAULT; - if (blk_verify_command(file, rq->cmd)) + if (blk_verify_command(&q->cmd_filter, rq->cmd, + file->f_mode & FMODE_WRITE)) return -EPERM; /* @@ -298,7 +382,7 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q, struct gendisk *disk, struct scsi_ioctl_command __user *sic) { struct request *rq; - int err; + int err, write_perm = 0; unsigned int in_len, out_len, bytes, opcode, cmdlen; char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE]; @@ -340,7 +424,11 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q, if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len)) goto error; - err = blk_verify_command(file, rq->cmd); + /* scsi_ioctl passes NULL */ + if (file && (file->f_mode & FMODE_WRITE)) + write_perm = 1; + + err = blk_verify_command(&q->cmd_filter, rq->cmd, write_perm); if (err) goto error; diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 3d36270a8b4..9d28b9f74d9 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -641,6 +641,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, unsigned char cmnd[MAX_COMMAND_SIZE]; int timeout; unsigned long ul_timeout; + struct request_queue *q; if (count < SZ_SG_IO_HDR) return -EINVAL; @@ -689,7 +690,9 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, sg_remove_request(sfp, srp); return -EFAULT; } - if (read_only && !blk_verify_command(file, cmnd)) { + q = sfp->parentdp->device->request_queue; + if (read_only && blk_verify_command(&q->cmd_filter, cmnd, + file->f_mode & FMODE_WRITE)) { sg_remove_request(sfp, srp); return -EPERM; } @@ -793,6 +796,7 @@ sg_ioctl(struct inode *inode, struct file *filp, if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; + SCSI_LOG_TIMEOUT(3, printk("sg_ioctl: %s, cmd=0x%x\n", sdp->disk->disk_name, (int) cmd_in)); read_only = (O_RDWR != (filp->f_flags & O_ACCMODE)); @@ -1057,11 +1061,14 @@ sg_ioctl(struct inode *inode, struct file *filp, return -ENODEV; if (read_only) { unsigned char opcode = WRITE_6; + struct request_queue *q = sdp->device->request_queue; Scsi_Ioctl_Command __user *siocp = p; if (copy_from_user(&opcode, siocp->data, 1)) return -EFAULT; - if (!blk_verify_command(filp, &opcode)) + if (blk_verify_command(&q->cmd_filter, + &opcode, + filp->f_mode & FMODE_WRITE)) return -EPERM; } return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e61f22be4d0..d2d34e2774b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -280,6 +280,15 @@ struct blk_queue_tag { atomic_t refcnt; /* map can be shared */ }; +#define BLK_SCSI_MAX_CMDS (256) +#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) + +struct blk_scsi_cmd_filter { + unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; + unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; + struct kobject kobj; +}; + struct request_queue { /* @@ -398,6 +407,7 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif + struct blk_scsi_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -833,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); /* * command filter functions */ -extern int blk_verify_command(struct file *file, unsigned char *cmd); -extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter, - unsigned char *cmd, mode_t *f_mode); +extern int blk_verify_command(struct blk_scsi_cmd_filter *filter, + unsigned char *cmd, int has_write_perm); extern int blk_register_filter(struct gendisk *disk); extern void blk_unregister_filter(struct gendisk *disk); +extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 118216f1bd3..be4f5e5bfe0 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -110,15 +110,6 @@ struct hd_struct { #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 #define GENHD_FL_FAIL 64 -#define BLK_SCSI_MAX_CMDS (256) -#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) - -struct blk_scsi_cmd_filter { - unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; - unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; - struct kobject kobj; -}; - struct gendisk { int major; /* major number of driver */ int first_minor; @@ -128,7 +119,6 @@ struct gendisk { struct hd_struct **part; /* [indexed by minor] */ struct block_device_operations *fops; struct request_queue *queue; - struct blk_scsi_cmd_filter cmd_filter; void *private_data; sector_t capacity; From 14e507b852e7dcea142b98757181bfa785cb4c05 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 26 Jul 2008 18:03:24 +0900 Subject: [PATCH 170/638] sg: restore command permission for TYPE_SCANNER sg allowed any command for TYPE_SCANNER. The cmd_filter patchset doesn't. We can't change sg's permission since it might break the existing software. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/sg.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 9d28b9f74d9..661f9f21650 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -217,6 +217,18 @@ static int sg_last_dev(void); #define SZ_SG_IOVEC sizeof(sg_iovec_t) #define SZ_SG_REQ_INFO sizeof(sg_req_info_t) +static int sg_allow_access(struct file *filp, unsigned char *cmd) +{ + struct sg_fd *sfp = (struct sg_fd *)filp->private_data; + struct request_queue *q = sfp->parentdp->device->request_queue; + + if (sfp->parentdp->device->type == TYPE_SCANNER) + return 0; + + return blk_verify_command(&q->cmd_filter, + cmd, filp->f_mode & FMODE_WRITE); +} + static int sg_open(struct inode *inode, struct file *filp) { @@ -641,7 +653,6 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, unsigned char cmnd[MAX_COMMAND_SIZE]; int timeout; unsigned long ul_timeout; - struct request_queue *q; if (count < SZ_SG_IO_HDR) return -EINVAL; @@ -690,9 +701,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf, sg_remove_request(sfp, srp); return -EFAULT; } - q = sfp->parentdp->device->request_queue; - if (read_only && blk_verify_command(&q->cmd_filter, cmnd, - file->f_mode & FMODE_WRITE)) { + if (read_only && sg_allow_access(file, cmnd)) { sg_remove_request(sfp, srp); return -EPERM; } @@ -1061,14 +1070,11 @@ sg_ioctl(struct inode *inode, struct file *filp, return -ENODEV; if (read_only) { unsigned char opcode = WRITE_6; - struct request_queue *q = sdp->device->request_queue; Scsi_Ioctl_Command __user *siocp = p; if (copy_from_user(&opcode, siocp->data, 1)) return -EFAULT; - if (blk_verify_command(&q->cmd_filter, - &opcode, - filp->f_mode & FMODE_WRITE)) + if (sg_allow_access(filp, &opcode)) return -EPERM; } return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p); From 4beab5c623fef4622f9a8593f85760ff10b5a3f7 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 26 Jul 2008 18:03:25 +0900 Subject: [PATCH 171/638] block: rename blk_scsi_cmd_filter to blk_cmd_filter Technically, the cmd_filter would be applied to other protocols though it's unlikely to happen. Putting SCSI stuff to request_queue is kinda layer violation. So let's rename it. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- block/cmd-filter.c | 30 +++++++++++++++--------------- block/scsi_ioctl.c | 2 +- include/linux/blkdev.h | 8 ++++---- 3 files changed, 20 insertions(+), 20 deletions(-) diff --git a/block/cmd-filter.c b/block/cmd-filter.c index c705c33361a..0e3a123944a 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -27,7 +27,7 @@ #include #include -int blk_verify_command(struct blk_scsi_cmd_filter *filter, +int blk_verify_command(struct blk_cmd_filter *filter, unsigned char *cmd, int has_write_perm) { /* root can do any command. */ @@ -51,7 +51,7 @@ int blk_verify_command(struct blk_scsi_cmd_filter *filter, EXPORT_SYMBOL(blk_verify_command); /* and now, the sysfs stuff */ -static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page, +static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page, int rw) { char *npage = page; @@ -78,18 +78,18 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page, return npage - page; } -static ssize_t rcf_readcmds_show(struct blk_scsi_cmd_filter *filter, char *page) +static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page) { return rcf_cmds_show(filter, page, READ); } -static ssize_t rcf_writecmds_show(struct blk_scsi_cmd_filter *filter, +static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter, char *page) { return rcf_cmds_show(filter, page, WRITE); } -static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter, +static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter, const char *page, size_t count, int rw) { ssize_t ret = 0; @@ -122,13 +122,13 @@ static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter, return count; } -static ssize_t rcf_readcmds_store(struct blk_scsi_cmd_filter *filter, +static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter, const char *page, size_t count) { return rcf_cmds_store(filter, page, count, READ); } -static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter, +static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter, const char *page, size_t count) { return rcf_cmds_store(filter, page, count, WRITE); @@ -136,8 +136,8 @@ static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter, struct rcf_sysfs_entry { struct attribute attr; - ssize_t (*show)(struct blk_scsi_cmd_filter *, char *); - ssize_t (*store)(struct blk_scsi_cmd_filter *, const char *, size_t); + ssize_t (*show)(struct blk_cmd_filter *, char *); + ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t); }; static struct rcf_sysfs_entry rcf_readcmds_entry = { @@ -164,9 +164,9 @@ static ssize_t rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page) { struct rcf_sysfs_entry *entry = to_rcf(attr); - struct blk_scsi_cmd_filter *filter; + struct blk_cmd_filter *filter; - filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj); + filter = container_of(kobj, struct blk_cmd_filter, kobj); if (entry->show) return entry->show(filter, page); @@ -178,7 +178,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr, const char *page, size_t length) { struct rcf_sysfs_entry *entry = to_rcf(attr); - struct blk_scsi_cmd_filter *filter; + struct blk_cmd_filter *filter; if (!capable(CAP_SYS_RAWIO)) return -EPERM; @@ -186,7 +186,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr, if (!entry->store) return -EINVAL; - filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj); + filter = container_of(kobj, struct blk_cmd_filter, kobj); return entry->store(filter, page, length); } @@ -203,7 +203,7 @@ static struct kobj_type rcf_ktype = { int blk_register_filter(struct gendisk *disk) { int ret; - struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter; + struct blk_cmd_filter *filter = &disk->queue->cmd_filter; struct kobject *parent = kobject_get(disk->holder_dir->parent); if (!parent) @@ -220,7 +220,7 @@ int blk_register_filter(struct gendisk *disk) void blk_unregister_filter(struct gendisk *disk) { - struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter; + struct blk_cmd_filter *filter = &disk->queue->cmd_filter; kobject_put(&filter->kobj); kobject_put(disk->holder_dir->parent); diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index d01ef5ee427..ec4b7f23462 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -105,7 +105,7 @@ static int sg_emulated_host(struct request_queue *q, int __user *p) return put_user(1, p); } -void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter) +void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter) { /* Basic read-only commands */ __set_bit(TEST_UNIT_READY, filter->read_ok); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d2d34e2774b..ab247d589ad 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -283,7 +283,7 @@ struct blk_queue_tag { #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -struct blk_scsi_cmd_filter { +struct blk_cmd_filter { unsigned long read_ok[BLK_SCSI_CMD_PER_LONG]; unsigned long write_ok[BLK_SCSI_CMD_PER_LONG]; struct kobject kobj; @@ -407,7 +407,7 @@ struct request_queue #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device bsg_dev; #endif - struct blk_scsi_cmd_filter cmd_filter; + struct blk_cmd_filter cmd_filter; }; #define QUEUE_FLAG_CLUSTER 0 /* cluster several segments into 1 */ @@ -843,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); /* * command filter functions */ -extern int blk_verify_command(struct blk_scsi_cmd_filter *filter, +extern int blk_verify_command(struct blk_cmd_filter *filter, unsigned char *cmd, int has_write_perm); extern int blk_register_filter(struct gendisk *disk); extern void blk_unregister_filter(struct gendisk *disk); -extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter); +extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 From a4a778971b9cfcbedb8648ba502d801f7db04c47 Mon Sep 17 00:00:00 2001 From: Adel Gadllah Date: Sat, 16 Aug 2008 14:21:06 +0900 Subject: [PATCH 172/638] block: clean up cmdfilter sysfs interface This patch changes the interface of the cmd filter to use a +/- notation like: echo -- +0x02 +0x03 -0x08 If neither + or - is given it defaults to + (allow command). Note: The interface was added in 2.6.17-rc1 and is unused and undocumented so far so it's safe to change it. Reviewed-by: Matthew Wilcox Reviewed-by: FUJITA Tomonori Cc: jens.axboe@oracle.com Cc: James.Bottomley@hansenpartnership.com Cc: dan.j.williams@intel.com Cc: pjones@redhat.com Cc: viro@zeniv.linux.org.uk Cc: dougg@torque.net Signed-off-by: Adel Gadllah Signed-off-by: Jens Axboe --- block/cmd-filter.c | 56 +++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 25 deletions(-) diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 0e3a123944a..1d4026206ac 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include @@ -65,8 +64,7 @@ static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page, for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) { if (test_bit(i, okbits)) { - sprintf(npage, "%02x", i); - npage += 2; + npage += sprintf(npage, "0x%02x", i); if (i < BLK_SCSI_MAX_CMDS - 1) sprintf(npage++, " "); } @@ -92,33 +90,41 @@ static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter, static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter, const char *page, size_t count, int rw) { - ssize_t ret = 0; unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits; - int cmd, status, len; - substring_t ss; + int cmd, set; + char *p, *status; - memset(&okbits, 0, sizeof(okbits)); - - for (len = strlen(page); len > 0; len -= 3) { - if (len < 2) - break; - ss.from = (char *) page + ret; - ss.to = (char *) page + ret + 2; - ret += 3; - status = match_hex(&ss, &cmd); - /* either of these cases means invalid input, so do nothing. */ - if (status || cmd >= BLK_SCSI_MAX_CMDS) - return -EINVAL; - - __set_bit(cmd, okbits); + if (rw == READ) { + memcpy(&okbits, filter->read_ok, sizeof(okbits)); + target_okbits = filter->read_ok; + } else { + memcpy(&okbits, filter->write_ok, sizeof(okbits)); + target_okbits = filter->write_ok; } - if (rw == READ) - target_okbits = filter->read_ok; - else - target_okbits = filter->write_ok; + while ((p = strsep((char **)&page, " ")) != NULL) { + set = 1; - memmove(target_okbits, okbits, sizeof(okbits)); + if (p[0] == '+') { + p++; + } else if (p[0] == '-') { + set = 0; + p++; + } + + cmd = simple_strtol(p, &status, 16); + + /* either of these cases means invalid input, so do nothing. */ + if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS) + return -EINVAL; + + if (set) + __set_bit(cmd, okbits); + else + __clear_bit(cmd, okbits); + } + + memcpy(target_okbits, okbits, sizeof(okbits)); return count; } From 48fd4f93a00eac844678629f2f00518e146ed30d Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 22 Aug 2008 10:00:36 +0200 Subject: [PATCH 173/638] block: submit_bh() inadvertently discards barrier flag on a sync write Reported by Milan Broz , commit 18ce3751 inadvertently made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix that up. Signed-off-by: Jens Axboe --- fs/buffer.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 38653e36e22..ac78d4c19b3 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2926,14 +2926,17 @@ int submit_bh(int rw, struct buffer_head * bh) BUG_ON(!buffer_mapped(bh)); BUG_ON(!bh->b_end_io); - if (buffer_ordered(bh) && (rw == WRITE)) - rw = WRITE_BARRIER; + /* + * Mask in barrier bit for a write (could be either a WRITE or a + * WRITE_SYNC + */ + if (buffer_ordered(bh) && (rw & WRITE)) + rw |= WRITE_BARRIER; /* - * Only clear out a write error when rewriting, should this - * include WRITE_SYNC as well? + * Only clear out a write error when rewriting */ - if (test_set_buffer_req(bh) && (rw == WRITE || rw == WRITE_BARRIER)) + if (test_set_buffer_req(bh) && (rw & WRITE)) clear_buffer_write_io_error(bh); /* From 76029ff37f31dad64641489c610d98955217bb68 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 25 Aug 2008 20:36:08 +0200 Subject: [PATCH 174/638] bio: fix bio_copy_kern() handling of bio->bv_len The commit 68154e90c9d1492d570671ae181d9a8f8530da55 introduced bio_copy_kern() to add bounce support to blk_rq_map_kern. bio_copy_kern() uses bio->bv_len to copy data for READ commands after the completion but it doesn't work with a request that partially completed. SCSI always completes a PC request as a whole but seems some don't. This patch fixes bio_copy_kern to handle the above case. As bio_copy_user does, bio_copy_kern uses struct bio_map_data to store struct bio_vec. Signed-off-by: FUJITA Tomonori Reported-by: Nix Tested-by: Nix Cc: stable@kernel.org Signed-off-by: Jens Axboe --- fs/bio.c | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 8000e2fa16c..8b1f5ee6f83 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -469,20 +469,21 @@ static void bio_free_map_data(struct bio_map_data *bmd) kfree(bmd); } -static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count) +static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count, + gfp_t gfp_mask) { - struct bio_map_data *bmd = kmalloc(sizeof(*bmd), GFP_KERNEL); + struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask); if (!bmd) return NULL; - bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, GFP_KERNEL); + bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, gfp_mask); if (!bmd->iovecs) { kfree(bmd); return NULL; } - bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, GFP_KERNEL); + bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, gfp_mask); if (bmd->sgvecs) return bmd; @@ -596,7 +597,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov, len += iov[i].iov_len; } - bmd = bio_alloc_map_data(nr_pages, iov_count); + bmd = bio_alloc_map_data(nr_pages, iov_count, GFP_KERNEL); if (!bmd) return ERR_PTR(-ENOMEM); @@ -942,19 +943,22 @@ static void bio_copy_kern_endio(struct bio *bio, int err) { struct bio_vec *bvec; const int read = bio_data_dir(bio) == READ; - char *p = bio->bi_private; + struct bio_map_data *bmd = bio->bi_private; int i; + char *p = bmd->sgvecs[0].iov_base; __bio_for_each_segment(bvec, bio, i, 0) { char *addr = page_address(bvec->bv_page); + int len = bmd->iovecs[i].bv_len; if (read && !err) - memcpy(p, addr, bvec->bv_len); + memcpy(p, addr, len); __free_page(bvec->bv_page); - p += bvec->bv_len; + p += len; } + bio_free_map_data(bmd); bio_put(bio); } @@ -978,11 +982,21 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len, const int nr_pages = end - start; struct bio *bio; struct bio_vec *bvec; + struct bio_map_data *bmd; int i, ret; + struct sg_iovec iov; + iov.iov_base = data; + iov.iov_len = len; + + bmd = bio_alloc_map_data(nr_pages, 1, gfp_mask); + if (!bmd) + return ERR_PTR(-ENOMEM); + + ret = -ENOMEM; bio = bio_alloc(gfp_mask, nr_pages); if (!bio) - return ERR_PTR(-ENOMEM); + goto out_bmd; while (len) { struct page *page; @@ -1016,14 +1030,18 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len, } } - bio->bi_private = data; + bio->bi_private = bmd; bio->bi_end_io = bio_copy_kern_endio; + + bio_set_map_data(bmd, bio, &iov, 1); return bio; cleanup: bio_for_each_segment(bvec, bio, i) __free_page(bvec->bv_page); bio_put(bio); +out_bmd: + bio_free_map_data(bmd); return ERR_PTR(ret); } From aefcc28a3a63ac33a298777aa50ba43641c75241 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 25 Aug 2008 20:36:08 +0200 Subject: [PATCH 175/638] bio: fix __bio_copy_iov() handling of bio->bv_len The commit c5dec1c3034f1ae3503efbf641ff3b0273b64797 introduced __bio_copy_iov() to add bounce support to blk_rq_map_user_iov. __bio_copy_iov() uses bio->bv_len to copy data for READ commands after the completion but it doesn't work with a request that partially completed. SCSI always completes a PC request as a whole but seems some don't. Signed-off-by: FUJITA Tomonori Cc: stable@kernel.org Signed-off-by: Jens Axboe --- fs/bio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 8b1f5ee6f83..3cba7ae34d7 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -492,8 +492,8 @@ static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count, return NULL; } -static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count, - int uncopy) +static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs, + struct sg_iovec *iov, int iov_count, int uncopy) { int ret = 0, i; struct bio_vec *bvec; @@ -503,7 +503,7 @@ static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count, __bio_for_each_segment(bvec, bio, i, 0) { char *bv_addr = page_address(bvec->bv_page); - unsigned int bv_len = bvec->bv_len; + unsigned int bv_len = iovecs[i].bv_len; while (bv_len && iov_idx < iov_count) { unsigned int bytes; @@ -555,7 +555,7 @@ int bio_uncopy_user(struct bio *bio) struct bio_map_data *bmd = bio->bi_private; int ret; - ret = __bio_copy_iov(bio, bmd->sgvecs, bmd->nr_sgvecs, 1); + ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs, bmd->nr_sgvecs, 1); bio_free_map_data(bmd); bio_put(bio); @@ -634,7 +634,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov, * success */ if (!write_to_vm) { - ret = __bio_copy_iov(bio, iov, iov_count, 0); + ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0); if (ret) goto cleanup; } From 0e3eb45e4fe901d92bf9eae103155a57517af32e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 26 Aug 2008 09:02:28 +0200 Subject: [PATCH 176/638] block: remove unused ->busy part of the block queue tag map It's not used for anything. On top of that, it's racy and can thus trigger a faulty BUG_ON() in __blk_free_tags() on queue exit. Signed-off-by: Jens Axboe --- block/blk-tag.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/block/blk-tag.c b/block/blk-tag.c index 32667beb03e..ed5166fbc59 100644 --- a/block/blk-tag.c +++ b/block/blk-tag.c @@ -38,7 +38,8 @@ static int __blk_free_tags(struct blk_queue_tag *bqt) retval = atomic_dec_and_test(&bqt->refcnt); if (retval) { - BUG_ON(bqt->busy); + BUG_ON(find_first_bit(bqt->tag_map, bqt->max_depth) < + bqt->max_depth); kfree(bqt->tag_index); bqt->tag_index = NULL; @@ -147,7 +148,6 @@ static struct blk_queue_tag *__blk_queue_init_tags(struct request_queue *q, if (init_tag_map(q, tags, depth)) goto fail; - tags->busy = 0; atomic_set(&tags->refcnt, 1); return tags; fail: @@ -313,7 +313,6 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq) * unlock memory barrier semantics. */ clear_bit_unlock(tag, bqt->tag_map); - bqt->busy--; } EXPORT_SYMBOL(blk_queue_end_tag); @@ -368,7 +367,6 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq) bqt->tag_index[tag] = rq; blkdev_dequeue_request(rq); list_add(&rq->queuelist, &q->tag_busy_list); - bqt->busy++; return 0; } EXPORT_SYMBOL(blk_queue_start_tag); From 5168c47b4c294412f079dd3cc891e0276bb0479e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 26 Aug 2008 09:03:17 +0200 Subject: [PATCH 177/638] block: remove blk_queue_tag_depth() and blk_queue_tag_queue() They are unused and ->busy doesn't exist anymore. Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ab247d589ad..44710d7e7bf 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -817,8 +817,6 @@ extern void blk_put_queue(struct request_queue *); /* * tag stuff */ -#define blk_queue_tag_depth(q) ((q)->queue_tags->busy) -#define blk_queue_tag_queue(q) ((q)->queue_tags->busy < (q)->queue_tags->max_depth) #define blk_rq_tagged(rq) ((rq)->cmd_flags & REQ_QUEUED) extern int blk_queue_start_tag(struct request_queue *, struct request *); extern struct request *blk_queue_find_tag(struct request_queue *, int); From 736783b8528bdce7f090dfae66f57411be40c5f8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 27 Aug 2008 11:47:57 +0800 Subject: [PATCH 178/638] Blackfin EMAC Driver: the BF526 also supports the MAC, so update things accordingly Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a5c141cecd4..4a11296a951 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -822,14 +822,14 @@ config ULTRA32 will be called smc-ultra32. config BFIN_MAC - tristate "Blackfin 527/536/537 on-chip mac support" - depends on NET_ETHERNET && (BF527 || BF537 || BF536) + tristate "Blackfin on-chip MAC support" + depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537) select CRC32 select MII select PHYLIB select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE help - This is the driver for blackfin on-chip mac device. Say Y if you want it + This is the driver for Blackfin on-chip mac device. Say Y if you want it compiled into the kernel. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called bfin_mac. From 3d01625a4f30ec9db8e964b7fde1f902f522e992 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 18:30:04 -0700 Subject: [PATCH 179/638] ixgbe: fix vlan filtering VLAN filtering is broken, due to reading the incorrect register for the VLAN filtering settings. Fixed by reading/writing the correct register. Signed-off-by: Alexander Duyck Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 34bca16d48a..53f41b649f0 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1636,16 +1636,17 @@ static void ixgbe_set_multi(struct net_device *netdev) struct ixgbe_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; u8 *mta_list; - u32 fctrl; + u32 fctrl, vlnctrl; int i; /* Check for Promiscuous and All Multicast modes */ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); if (netdev->flags & IFF_PROMISC) { fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); - fctrl &= ~IXGBE_VLNCTRL_VFE; + vlnctrl &= ~IXGBE_VLNCTRL_VFE; } else { if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; @@ -1653,10 +1654,11 @@ static void ixgbe_set_multi(struct net_device *netdev) } else { fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); } - fctrl |= IXGBE_VLNCTRL_VFE; + vlnctrl |= IXGBE_VLNCTRL_VFE; } IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); if (netdev->mc_count) { mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC); From 0623807a18c4baa2effcdb298e8b31d90e3ef69f Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Tue, 26 Aug 2008 23:29:12 +0200 Subject: [PATCH 180/638] myri10ge: update version string to 1.4.3-1.358 Update myri10ge version string to 1.4.3-1.358. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 5d76cd09e24..f6847531bf9 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -76,7 +76,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.3.99-1.347" +#define MYRI10GE_VERSION_STR "1.4.3-1.358" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); From 666d9bbedfff7c2c37eab92e715641922dee6864 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 27 Aug 2008 02:12:52 -0700 Subject: [PATCH 181/638] pkt_sched: Fix dev_graft_qdisc() locking During dev_graft_qdisc() dev is deactivated, so qdisc_root_lock() returns wrong lock of noop_qdisc instead of qdisc_sleeping. Signed-off-by: Jarek Poplawski Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index e7fb9e0d21b..341d558b6e3 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -624,7 +624,7 @@ static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, struct Qdisc *oqdisc = dev_queue->qdisc_sleeping; spinlock_t *root_lock; - root_lock = qdisc_root_lock(oqdisc); + root_lock = qdisc_lock(oqdisc); spin_lock_bh(root_lock); /* Prune old scheduler */ From a866bbf6aacf95f849810079442a20be118ce905 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Tue, 26 Aug 2008 21:56:06 +0200 Subject: [PATCH 182/638] r8169: balance pci_map / pci_unmap pair MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The leak hurts with swiotlb and jumbo frames. Fix http://bugzilla.kernel.org/show_bug.cgi?id=9468. Heavily hinted by Ilpo Järvinen . Signed-off-by: Francois Romieu Tested-by: Alistair John Strachan Tested-by: Timothy J Fontaine Cc: Edward Hsu Signed-off-by: Jeff Garzik --- drivers/net/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index a3e3895e503..0f6f9747d25 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2792,7 +2792,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev, pkt_size, PCI_DMA_FROMDEVICE); rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - pci_unmap_single(pdev, addr, pkt_size, + pci_unmap_single(pdev, addr, tp->rx_buf_sz, PCI_DMA_FROMDEVICE); tp->Rx_skbuff[entry] = NULL; } From 7a6ea550f2f7592742ac765e5a3b4b5d1461e0bd Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 04:25:03 -0700 Subject: [PATCH 183/638] igb: force all queues to interrupt once every 2 seconds Set the EICS bit for each of the RX queues at least once every 2 seconds to prevent the rx queues from stalling. Signed-off-by: Jeff Kirsher Signed-off-by: Alexander Duyck Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 8f66e15ec8d..465a810b670 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2290,7 +2290,9 @@ static void igb_watchdog_task(struct work_struct *work) struct igb_ring *tx_ring = adapter->tx_ring; struct e1000_mac_info *mac = &adapter->hw.mac; u32 link; + u32 eics = 0; s32 ret_val; + int i; if ((netif_carrier_ok(netdev)) && (rd32(E1000_STATUS) & E1000_STATUS_LU)) @@ -2392,7 +2394,13 @@ link_up: } /* Cause software interrupt to ensure rx ring is cleaned */ - wr32(E1000_ICS, E1000_ICS_RXDMT0); + if (adapter->msix_entries) { + for (i = 0; i < adapter->num_rx_queues; i++) + eics |= adapter->rx_ring[i].eims_value; + wr32(E1000_EICS, eics); + } else { + wr32(E1000_ICS, E1000_ICS_RXDMT0); + } /* Force detection of hung controller every watchdog period */ tx_ring->detect_tx_hung = true; From fe59de38c58d3eedc025be61ff3055a41776bbd4 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 04:25:05 -0700 Subject: [PATCH 184/638] igb: ethtool -d reads EICR which is incorrect as it is read on clear Ethtool -d is reading the EICR and ICR registers which is currently clearing these registers and masking off interrupts. To prevent this we read the EICS and ICS equivilents as they can be read without clearing or masking. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_ethtool.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 11aee130995..3eb78a66f8b 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -373,13 +373,17 @@ static void igb_get_regs(struct net_device *netdev, regs_buff[12] = rd32(E1000_EECD); /* Interrupt */ - regs_buff[13] = rd32(E1000_EICR); + /* Reading EICS for EICR because they read the + * same but EICS does not clear on read */ + regs_buff[13] = rd32(E1000_EICS); regs_buff[14] = rd32(E1000_EICS); regs_buff[15] = rd32(E1000_EIMS); regs_buff[16] = rd32(E1000_EIMC); regs_buff[17] = rd32(E1000_EIAC); regs_buff[18] = rd32(E1000_EIAM); - regs_buff[19] = rd32(E1000_ICR); + /* Reading ICS for ICR because they read the + * same but ICS does not clear on read */ + regs_buff[19] = rd32(E1000_ICS); regs_buff[20] = rd32(E1000_ICS); regs_buff[21] = rd32(E1000_IMS); regs_buff[22] = rd32(E1000_IMC); From 34a20e89739e9ac1cb89bdf430b694d2c946ebff Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 26 Aug 2008 04:25:13 -0700 Subject: [PATCH 185/638] igb: fix setting the number of tx queues The real_num_tx_queues was not being set when in MSI-X only mode. This patch corrects that path so all interrupt types are correctly configured. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 465a810b670..e6eb13a303c 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -521,7 +521,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) adapter->msix_entries, numvecs); if (err == 0) - return; + goto out; igb_reset_interrupt_capability(adapter); @@ -531,7 +531,7 @@ msi_only: adapter->num_tx_queues = 1; if (!pci_enable_msi(adapter->pdev)) adapter->flags |= IGB_FLAG_HAS_MSI; - +out: /* Notify the stack of the (possibly) reduced Tx Queue count. */ adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; return; From f4f62301c6f42127b7462274abfcbc278f84d59a Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 25 Aug 2008 20:20:53 -0500 Subject: [PATCH 186/638] fs_enet: Fix SCC Ethernet on CPM2, and crash in fs_enet_rx_napi() Signed-off-by: Heiko Schocher Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala Signed-off-by: Jeff Garzik --- arch/powerpc/include/asm/cpm2.h | 5 +++++ drivers/net/fs_enet/fs_enet-main.c | 8 ++++++++ drivers/net/fs_enet/mac-scc.c | 8 +++++++- 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h index 2a6fa0183ac..0f5e8ff59a8 100644 --- a/arch/powerpc/include/asm/cpm2.h +++ b/arch/powerpc/include/asm/cpm2.h @@ -337,6 +337,11 @@ typedef struct scc_param { uint scc_tcrc; /* Internal */ } sccp_t; +/* Function code bits. +*/ +#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */ +#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */ + /* CPM Ethernet through SCC1. */ typedef struct scc_enet { diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 9a51ec8293c..9d461825bf4 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -792,6 +792,10 @@ static int fs_enet_open(struct net_device *dev) int r; int err; + /* to initialize the fep->cur_rx,... */ + /* not doing this, will cause a crash in fs_enet_rx_napi */ + fs_init_bds(fep->ndev); + if (fep->fpi->use_napi) napi_enable(&fep->napi); @@ -1167,6 +1171,10 @@ static struct of_device_id fs_enet_match[] = { .compatible = "fsl,cpm1-scc-enet", .data = (void *)&fs_scc_ops, }, + { + .compatible = "fsl,cpm2-scc-enet", + .data = (void *)&fs_scc_ops, + }, #endif #ifdef CONFIG_FS_ENET_HAS_FCC { diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index 029b3c7ef29..22f50dd8b27 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -47,7 +47,6 @@ #include "fs_enet.h" /*************************************************/ - #if defined(CONFIG_CPM1) /* for a 8xx __raw_xxx's are sufficient */ #define __fs_out32(addr, x) __raw_writel(x, addr) @@ -62,6 +61,8 @@ #define __fs_out16(addr, x) out_be16(addr, x) #define __fs_in32(addr) in_be32(addr) #define __fs_in16(addr) in_be16(addr) +#define __fs_out8(addr, x) out_8(addr, x) +#define __fs_in8(addr) in_8(addr) #endif /* write, read, set bits, clear bits */ @@ -262,8 +263,13 @@ static void restart(struct net_device *dev) /* Initialize function code registers for big-endian. */ +#ifndef CONFIG_NOT_COHERENT_CACHE + W8(ep, sen_genscc.scc_rfcr, SCC_EB | SCC_GBL); + W8(ep, sen_genscc.scc_tfcr, SCC_EB | SCC_GBL); +#else W8(ep, sen_genscc.scc_rfcr, SCC_EB); W8(ep, sen_genscc.scc_tfcr, SCC_EB); +#endif /* Set maximum bytes per receive buffer. * This appears to be an Ethernet frame size, not the buffer From d3d7b53d1ae46534cd73e1073a5c29e3b61a0552 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 22 Aug 2008 19:24:15 +0100 Subject: [PATCH 187/638] [netdrvr] fix build issue: undefined reference to `NS8390p_init' Signed-off-by: Alan 'pass the paper bags' Cox Signed-off-by: Jeff Garzik --- drivers/net/wd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wd.c b/drivers/net/wd.c index 6f9aa164374..fa14255282a 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = ei_poll; #endif - NS8390p_init(dev, 0); + NS8390_init(dev, 0); #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ From 2b356b463933031374c373f70d9a3b14ec707161 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 21 Aug 2008 17:10:22 +0200 Subject: [PATCH 188/638] claw: fix memory leak in claw_probe. probe_error() frees memory only, if cgdev->dev.driver_data refers to the claw_privbk structure. Move forward its setting in claw_probe() to ensure proper freeing of claw_privbk allocations. Cc: Daniel Signed-off-by: Martin Schwidefsky Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/claw.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index a08b1682c8e..cc5697deb1d 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -271,6 +271,7 @@ claw_probe(struct ccwgroup_device *cgdev) if (!get_device(&cgdev->dev)) return -ENODEV; privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL); + cgdev->dev.driver_data = privptr; if (privptr == NULL) { probe_error(cgdev); put_device(&cgdev->dev); @@ -305,7 +306,6 @@ claw_probe(struct ccwgroup_device *cgdev) privptr->p_env->p_priv = privptr; cgdev->cdev[0]->handler = claw_irq_handler; cgdev->cdev[1]->handler = claw_irq_handler; - cgdev->dev.driver_data = privptr; CLAW_DBF_TEXT(2, setup, "prbext 0"); return 0; @@ -1960,19 +1960,16 @@ init_ccw_bk(struct net_device *dev) static void probe_error( struct ccwgroup_device *cgdev) { - struct claw_privbk *privptr; + struct claw_privbk *privptr; CLAW_DBF_TEXT(4, trace, "proberr"); - privptr=(struct claw_privbk *)cgdev->dev.driver_data; - if (privptr!=NULL) { + privptr = (struct claw_privbk *) cgdev->dev.driver_data; + if (privptr != NULL) { + cgdev->dev.driver_data = NULL; kfree(privptr->p_env); - privptr->p_env=NULL; - kfree(privptr->p_mtc_envelope); - privptr->p_mtc_envelope=NULL; - kfree(privptr); - privptr=NULL; - } - return; + kfree(privptr->p_mtc_envelope); + kfree(privptr); + } } /* probe_error */ /*-------------------------------------------------------------------* From 6951df34d50330f1b117fd8371d7f7df39f43f6a Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Thu, 21 Aug 2008 17:10:23 +0200 Subject: [PATCH 189/638] claw: netdev->priv vs. netdev->ml_priv Use netdev->ml_priv instead of netdev->priv Signed-off-by: Peter Tiedemann Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/claw.c | 60 ++++++++++++++++++++--------------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index cc5697deb1d..e10ac9ab2d4 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -133,14 +133,14 @@ claw_register_debug_facility(void) static inline void claw_set_busy(struct net_device *dev) { - ((struct claw_privbk *) dev->priv)->tbusy=1; + ((struct claw_privbk *)dev->ml_priv)->tbusy = 1; eieio(); } static inline void claw_clear_busy(struct net_device *dev) { - clear_bit(0, &(((struct claw_privbk *) dev->priv)->tbusy)); + clear_bit(0, &(((struct claw_privbk *) dev->ml_priv)->tbusy)); netif_wake_queue(dev); eieio(); } @@ -149,20 +149,20 @@ static inline int claw_check_busy(struct net_device *dev) { eieio(); - return ((struct claw_privbk *) dev->priv)->tbusy; + return ((struct claw_privbk *) dev->ml_priv)->tbusy; } static inline void claw_setbit_busy(int nr,struct net_device *dev) { netif_stop_queue(dev); - set_bit(nr, (void *)&(((struct claw_privbk *)dev->priv)->tbusy)); + set_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy)); } static inline void claw_clearbit_busy(int nr,struct net_device *dev) { - clear_bit(nr,(void *)&(((struct claw_privbk *)dev->priv)->tbusy)); + clear_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy)); netif_wake_queue(dev); } @@ -171,7 +171,7 @@ claw_test_and_setbit_busy(int nr,struct net_device *dev) { netif_stop_queue(dev); return test_and_set_bit(nr, - (void *)&(((struct claw_privbk *) dev->priv)->tbusy)); + (void *)&(((struct claw_privbk *) dev->ml_priv)->tbusy)); } @@ -319,7 +319,7 @@ static int claw_tx(struct sk_buff *skb, struct net_device *dev) { int rc; - struct claw_privbk *privptr=dev->priv; + struct claw_privbk *privptr = dev->ml_priv; unsigned long saveflags; struct chbk *p_ch; @@ -404,7 +404,7 @@ claw_pack_skb(struct claw_privbk *privptr) static int claw_change_mtu(struct net_device *dev, int new_mtu) { - struct claw_privbk *privptr=dev->priv; + struct claw_privbk *privptr = dev->ml_priv; int buff_size; CLAW_DBF_TEXT(4, trace, "setmtu"); buff_size = privptr->p_env->write_size; @@ -434,7 +434,7 @@ claw_open(struct net_device *dev) struct ccwbk *p_buf; CLAW_DBF_TEXT(4, trace, "open"); - privptr = (struct claw_privbk *)dev->priv; + privptr = (struct claw_privbk *)dev->ml_priv; /* allocate and initialize CCW blocks */ if (privptr->buffs_alloc == 0) { rc=init_ccw_bk(dev); @@ -780,7 +780,7 @@ claw_irq_tasklet ( unsigned long data ) p_ch = (struct chbk *) data; dev = (struct net_device *)p_ch->ndev; CLAW_DBF_TEXT(4, trace, "IRQtask"); - privptr = (struct claw_privbk *) dev->priv; + privptr = (struct claw_privbk *)dev->ml_priv; unpack_read(dev); clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a); CLAW_DBF_TEXT(4, trace, "TskletXt"); @@ -805,7 +805,7 @@ claw_release(struct net_device *dev) if (!dev) return 0; - privptr = (struct claw_privbk *) dev->priv; + privptr = (struct claw_privbk *)dev->ml_priv; if (!privptr) return 0; CLAW_DBF_TEXT(4, trace, "release"); @@ -960,7 +960,7 @@ claw_write_next ( struct chbk * p_ch ) if (p_ch->claw_state == CLAW_STOP) return; dev = (struct net_device *) p_ch->ndev; - privptr = (struct claw_privbk *) dev->priv; + privptr = (struct claw_privbk *) dev->ml_priv; claw_free_wrt_buf( dev ); if ((privptr->write_free_count > 0) && !skb_queue_empty(&p_ch->collect_queue)) { @@ -1042,7 +1042,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first, struct ccw1 temp_ccw; struct endccw * p_end; CLAW_DBF_TEXT(4, trace, "addreads"); - privptr = dev->priv; + privptr = dev->ml_priv; p_end = privptr->p_end_ccw; /* first CCW and last CCW contains a new set of read channel programs @@ -1212,7 +1212,7 @@ find_link(struct net_device *dev, char *host_name, char *ws_name ) int rc=0; CLAW_DBF_TEXT(2, setup, "findlink"); - privptr=dev->priv; + privptr = dev->ml_priv; p_env=privptr->p_env; switch (p_env->packing) { @@ -1264,7 +1264,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid) struct chbk *ch; CLAW_DBF_TEXT(4, trace, "hw_tx"); - privptr = (struct claw_privbk *) (dev->priv); + privptr = (struct claw_privbk *)(dev->ml_priv); p_ch=(struct chbk *)&privptr->channel[WRITE]; p_env =privptr->p_env; claw_free_wrt_buf(dev); /* Clean up free chain if posible */ @@ -1483,8 +1483,8 @@ init_ccw_bk(struct net_device *dev) struct ccwbk*p_last_CCWB; struct ccwbk*p_first_CCWB; struct endccw *p_endccw=NULL; - addr_t real_address; - struct claw_privbk *privptr=dev->priv; + addr_t real_address; + struct claw_privbk *privptr = dev->ml_priv; struct clawh *pClawH=NULL; addr_t real_TIC_address; int i,j; @@ -1997,7 +1997,7 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw) CLAW_DBF_TEXT(2, setup, "clw_cntl"); udelay(1000); /* Wait a ms for the control packets to *catch up to each other */ - privptr=dev->priv; + privptr = dev->ml_priv; p_env=privptr->p_env; tdev = &privptr->channel[READ].cdev->dev; memcpy( &temp_host_name, p_env->host_name, 8); @@ -2275,7 +2275,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link, struct sk_buff *skb; CLAW_DBF_TEXT(2, setup, "sndcntl"); - privptr=dev->priv; + privptr = dev->ml_priv; p_ctl=(struct clawctl *)&privptr->ctl_bk; p_ctl->command=type; @@ -2345,7 +2345,7 @@ static int claw_snd_conn_req(struct net_device *dev, __u8 link) { int rc; - struct claw_privbk *privptr=dev->priv; + struct claw_privbk *privptr = dev->ml_priv; struct clawctl *p_ctl; CLAW_DBF_TEXT(2, setup, "snd_conn"); @@ -2405,7 +2405,7 @@ claw_snd_sys_validate_rsp(struct net_device *dev, int rc; CLAW_DBF_TEXT(2, setup, "chkresp"); - privptr = dev->priv; + privptr = dev->ml_priv; p_env=privptr->p_env; rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE, p_ctl->linkid, @@ -2443,7 +2443,7 @@ net_device_stats *claw_stats(struct net_device *dev) struct claw_privbk *privptr; CLAW_DBF_TEXT(4, trace, "stats"); - privptr = dev->priv; + privptr = dev->ml_priv; return &privptr->stats; } /* end of claw_stats */ @@ -2479,7 +2479,7 @@ unpack_read(struct net_device *dev ) p_last_ccw=NULL; p_packh=NULL; p_packd=NULL; - privptr=dev->priv; + privptr = dev->ml_priv; p_dev = &privptr->channel[READ].cdev->dev; p_env = privptr->p_env; @@ -2648,7 +2648,7 @@ claw_strt_read (struct net_device *dev, int lock ) int rc = 0; __u32 parm; unsigned long saveflags = 0; - struct claw_privbk *privptr=dev->priv; + struct claw_privbk *privptr = dev->ml_priv; struct ccwbk*p_ccwbk; struct chbk *p_ch; struct clawh *p_clawh; @@ -2705,7 +2705,7 @@ claw_strt_out_IO( struct net_device *dev ) if (!dev) { return; } - privptr=(struct claw_privbk *)dev->priv; + privptr = (struct claw_privbk *)dev->ml_priv; p_ch=&privptr->channel[WRITE]; CLAW_DBF_TEXT(4, trace, "strt_io"); @@ -2738,7 +2738,7 @@ static void claw_free_wrt_buf( struct net_device *dev ) { - struct claw_privbk *privptr=(struct claw_privbk *)dev->priv; + struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv; struct ccwbk*p_first_ccw; struct ccwbk*p_last_ccw; struct ccwbk*p_this_ccw; @@ -2795,13 +2795,13 @@ claw_free_netdevice(struct net_device * dev, int free_dev) if (!dev) return; CLAW_DBF_TEXT_(2, setup, "%s", dev->name); - privptr = dev->priv; + privptr = dev->ml_priv; if (dev->flags & IFF_RUNNING) claw_release(dev); if (privptr) { privptr->channel[READ].ndev = NULL; /* say it's free */ } - dev->priv=NULL; + dev->ml_priv = NULL; #ifdef MODULE if (free_dev) { free_netdev(dev); @@ -2918,7 +2918,7 @@ claw_new_device(struct ccwgroup_device *cgdev) printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__); goto out; } - dev->priv = privptr; + dev->ml_priv = privptr; cgdev->dev.driver_data = privptr; cgdev->cdev[READ]->dev.driver_data = privptr; cgdev->cdev[WRITE]->dev.driver_data = privptr; @@ -2999,7 +2999,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev) ret = claw_release(ndev); ndev->flags &=~IFF_RUNNING; unregister_netdev(ndev); - ndev->priv = NULL; /* cgdev data, not ndev's to free */ + ndev->ml_priv = NULL; /* cgdev data, not ndev's to free */ claw_free_netdevice(ndev, 1); priv->channel[READ].ndev = NULL; priv->channel[WRITE].ndev = NULL; From 261893d30b0ddb5587f9143df18a6efed39a7ed6 Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Thu, 21 Aug 2008 17:10:24 +0200 Subject: [PATCH 190/638] ctcm: netdev->priv vs. netdev->ml_priv Use netdev->ml_priv instead of netdev->priv Signed-off-by: Peter Tiedemann Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/ctcm_fsms.c | 56 ++++++++++++++++++------------------ drivers/s390/net/ctcm_main.c | 24 ++++++++-------- drivers/s390/net/ctcm_main.h | 9 +++--- drivers/s390/net/ctcm_mpc.c | 46 ++++++++++++++--------------- 4 files changed, 68 insertions(+), 67 deletions(-) diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c index 0b4e6253abe..42776550acf 100644 --- a/drivers/s390/net/ctcm_fsms.c +++ b/drivers/s390/net/ctcm_fsms.c @@ -245,7 +245,7 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct sk_buff *skb; int first = 1; int i; @@ -336,7 +336,7 @@ void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name); @@ -357,7 +357,7 @@ static void chx_rx(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; int len = ch->max_bufsize - ch->irb->scsw.cmd.count; struct sk_buff *skb = ch->trans_skb; __u16 block_len = *((__u16 *)skb->data); @@ -459,7 +459,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg) chx_rxidle(fi, event, arg); } else { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; fsm_newstate(fi, CTC_STATE_TXIDLE); fsm_event(priv->fsm, DEV_EVENT_TXUP, dev); } @@ -496,7 +496,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg) if ((CHANNEL_DIRECTION(ch->flags) == READ) && (ch->protocol == CTCM_PROTO_S390)) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; fsm_event(priv->fsm, DEV_EVENT_RXUP, dev); } } @@ -514,7 +514,7 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; __u16 buflen; int rc; @@ -699,7 +699,7 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state, struct channel *ch) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE, "%s(%s): %s[%d]\n", @@ -784,7 +784,7 @@ static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; /* * Special case: Got UC_RCRESET on setmode. @@ -874,7 +874,7 @@ static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; if (event == CTC_EVENT_TIMER) { if (!IS_MPCDEV(dev)) @@ -902,7 +902,7 @@ static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR, "%s(%s): RX %s busy, init. fail", @@ -923,7 +923,7 @@ static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg) struct channel *ch = arg; struct channel *ch2; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE, "%s: %s: remote disconnect - re-init ...", @@ -954,7 +954,7 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; if (event == CTC_EVENT_TIMER) { fsm_deltimer(&ch->timer); @@ -984,7 +984,7 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct sk_buff *skb; CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n", @@ -1057,7 +1057,7 @@ static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; int rd = CHANNEL_DIRECTION(ch->flags); fsm_deltimer(&ch->timer); @@ -1207,7 +1207,7 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct sk_buff *skb; int first = 1; @@ -1368,7 +1368,7 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct sk_buff *skb = ch->trans_skb; struct sk_buff *new_skb; @@ -1471,7 +1471,7 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *gptr = priv->mpcg; CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n", @@ -1525,7 +1525,7 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; int rc; unsigned long saveflags = 0; /* avoids compiler warning */ @@ -1580,7 +1580,7 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n", @@ -1639,7 +1639,7 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("%s(%s): %s\n ChState:%s GrpState:%s\n", @@ -1724,7 +1724,7 @@ static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch); @@ -1740,7 +1740,7 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg) { struct channel *ach = arg; struct net_device *dev = ach->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct channel *wch = priv->channel[WRITE]; struct channel *rch = priv->channel[READ]; @@ -2050,7 +2050,7 @@ int mpc_ch_fsm_len = ARRAY_SIZE(ctcmpc_ch_fsm); static void dev_action_start(fsm_instance *fi, int event, void *arg) { struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; int direction; CTCMY_DBF_DEV_NAME(SETUP, dev, ""); @@ -2076,7 +2076,7 @@ static void dev_action_stop(fsm_instance *fi, int event, void *arg) { int direction; struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCMY_DBF_DEV_NAME(SETUP, dev, ""); @@ -2096,7 +2096,7 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg) { int restart_timer; struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCMY_DBF_DEV_NAME(TRACE, dev, ""); @@ -2133,12 +2133,12 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg) static void dev_action_chup(fsm_instance *fi, int event, void *arg) { struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; int dev_stat = fsm_getstate(fi); CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE, "%s(%s): priv = %p [%d,%d]\n ", CTCM_FUNTAIL, - dev->name, dev->priv, dev_stat, event); + dev->name, dev->ml_priv, dev_stat, event); switch (fsm_getstate(fi)) { case DEV_STATE_STARTWAIT_RXTX: @@ -2195,7 +2195,7 @@ static void dev_action_chdown(fsm_instance *fi, int event, void *arg) { struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCMY_DBF_DEV_NAME(SETUP, dev, ""); diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c index 126a3ebb8ab..b11fec24c7d 100644 --- a/drivers/s390/net/ctcm_main.c +++ b/drivers/s390/net/ctcm_main.c @@ -69,7 +69,7 @@ struct channel *channels; void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; __u16 len = *((__u16 *) pskb->data); skb_put(pskb, 2 + LL_HEADER_LENGTH); @@ -414,7 +414,7 @@ int ctcm_ch_alloc_buffer(struct channel *ch) */ int ctcm_open(struct net_device *dev) { - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCMY_DBF_DEV_NAME(SETUP, dev, ""); if (!IS_MPC(priv)) @@ -432,7 +432,7 @@ int ctcm_open(struct net_device *dev) */ int ctcm_close(struct net_device *dev) { - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; CTCMY_DBF_DEV_NAME(SETUP, dev, ""); if (!IS_MPC(priv)) @@ -573,7 +573,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb) skb_pull(skb, LL_HEADER_LENGTH + 2); } else if (ccw_idx == 0) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; priv->stats.tx_packets++; priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH; } @@ -592,7 +592,7 @@ static void ctcmpc_send_sweep_req(struct channel *rch) struct channel *ch; /* int rc = 0; */ - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; ch = priv->channel[WRITE]; @@ -652,7 +652,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb) { struct pdu *p_header; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct th_header *header; struct sk_buff *nskb; @@ -867,7 +867,7 @@ done: /* first merge version - leaving both functions separated */ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev) { - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; if (skb == NULL) { CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR, @@ -911,7 +911,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev) static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev) { int len = 0; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct sk_buff *newskb = NULL; @@ -1025,7 +1025,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < 576 || new_mtu > 65527) return -EINVAL; - priv = dev->priv; + priv = dev->ml_priv; max_bufsize = priv->channel[READ]->max_bufsize; if (IS_MPC(priv)) { @@ -1050,7 +1050,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu) */ static struct net_device_stats *ctcm_stats(struct net_device *dev) { - return &((struct ctcm_priv *)dev->priv)->stats; + return &((struct ctcm_priv *)dev->ml_priv)->stats; } static void ctcm_free_netdevice(struct net_device *dev) @@ -1060,7 +1060,7 @@ static void ctcm_free_netdevice(struct net_device *dev) CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s)", CTCM_FUNTAIL, dev->name); - priv = dev->priv; + priv = dev->ml_priv; if (priv) { grp = priv->mpcg; if (grp) { @@ -1125,7 +1125,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) CTCM_FUNTAIL); return NULL; } - dev->priv = priv; + dev->ml_priv = priv; priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names, CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS, dev_fsm, dev_fsm_len, GFP_KERNEL); diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h index a72e0feeb27..8e10ee86a5e 100644 --- a/drivers/s390/net/ctcm_main.h +++ b/drivers/s390/net/ctcm_main.h @@ -229,14 +229,14 @@ void ctcm_remove_files(struct device *dev); */ static inline void ctcm_clear_busy_do(struct net_device *dev) { - clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy)); + clear_bit(0, &(((struct ctcm_priv *)dev->ml_priv)->tbusy)); netif_wake_queue(dev); } static inline void ctcm_clear_busy(struct net_device *dev) { struct mpc_group *grp; - grp = ((struct ctcm_priv *)dev->priv)->mpcg; + grp = ((struct ctcm_priv *)dev->ml_priv)->mpcg; if (!(grp && grp->in_sweep)) ctcm_clear_busy_do(dev); @@ -246,7 +246,8 @@ static inline void ctcm_clear_busy(struct net_device *dev) static inline int ctcm_test_and_set_busy(struct net_device *dev) { netif_stop_queue(dev); - return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy)); + return test_and_set_bit(0, + &(((struct ctcm_priv *)dev->ml_priv)->tbusy)); } extern int loglevel; @@ -292,7 +293,7 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv); #define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC) /* test if struct ctcm_priv of struct net_device has MPC protocol setting */ -#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv) +#define IS_MPCDEV(dev) IS_MPC((struct ctcm_priv *)dev->ml_priv) static inline gfp_t gfp_type(void) { diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c index 49ae1cd25ca..407f816f091 100644 --- a/drivers/s390/net/ctcm_mpc.c +++ b/drivers/s390/net/ctcm_mpc.c @@ -313,10 +313,10 @@ static struct net_device *ctcmpc_get_dev(int port_num) CTCM_FUNTAIL, device); return NULL; } - priv = dev->priv; + priv = dev->ml_priv; if (priv == NULL) { CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR, - "%s(%s): dev->priv is NULL", + "%s(%s): dev->ml_priv is NULL", CTCM_FUNTAIL, device); return NULL; } @@ -345,7 +345,7 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int)) dev = ctcmpc_get_dev(port_num); if (dev == NULL) return 1; - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; grp->allochanfunc = callback; @@ -417,7 +417,7 @@ void ctc_mpc_establish_connectivity(int port_num, dev = ctcmpc_get_dev(port_num); if (dev == NULL) return; - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; rch = priv->channel[READ]; wch = priv->channel[WRITE]; @@ -535,7 +535,7 @@ void ctc_mpc_dealloc_ch(int port_num) dev = ctcmpc_get_dev(port_num); if (dev == NULL) return; - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG, @@ -571,7 +571,7 @@ void ctc_mpc_flow_control(int port_num, int flowc) dev = ctcmpc_get_dev(port_num); if (dev == NULL) return; - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG, @@ -620,7 +620,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo) { struct channel *rch = mpcginfo->ch; struct net_device *dev = rch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct channel *ch = priv->channel[WRITE]; @@ -651,7 +651,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo) static void ctcmpc_send_sweep_resp(struct channel *rch) { struct net_device *dev = rch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; int rc = 0; struct th_sweep *header; @@ -713,7 +713,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo) { struct channel *rch = mpcginfo->ch; struct net_device *dev = rch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct channel *ch = priv->channel[WRITE]; @@ -847,7 +847,7 @@ static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm); static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg) { struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; if (grp == NULL) { @@ -891,7 +891,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg) void mpc_group_ready(unsigned long adev) { struct net_device *dev = (struct net_device *)adev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct channel *ch = NULL; @@ -947,7 +947,7 @@ void mpc_group_ready(unsigned long adev) void mpc_channel_action(struct channel *ch, int direction, int action) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; if (grp == NULL) { @@ -1057,7 +1057,7 @@ done: static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb) { struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct pdu *curr_pdu; struct mpcg_info *mpcginfo; @@ -1255,7 +1255,7 @@ void ctcmpc_bh(unsigned long thischan) struct channel *ch = (struct channel *)thischan; struct sk_buff *skb; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("%s cp:%i enter: %s() %s\n", @@ -1377,7 +1377,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg) BUG_ON(dev == NULL); CTCM_PR_DEBUG("Enter %s: %s\n", __func__, dev->name); - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; grp->flow_off_called = 0; fsm_deltimer(&grp->timer); @@ -1483,7 +1483,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg) BUG_ON(dev == NULL); - priv = dev->priv; + priv = dev->ml_priv; grp = priv->mpcg; wch = priv->channel[WRITE]; rch = priv->channel[READ]; @@ -1521,7 +1521,7 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg) if (ch) { dev = ch->netdev; if (dev) { - priv = dev->priv; + priv = dev->ml_priv; if (priv) { CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE, "%s: %s: %s\n", @@ -1569,7 +1569,7 @@ static int mpc_validate_xid(struct mpcg_info *mpcginfo) { struct channel *ch = mpcginfo->ch; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; struct xid2 *xid = mpcginfo->xid; int rc = 0; @@ -1866,7 +1866,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg) { struct channel *ch = arg; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n", @@ -1906,7 +1906,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg) static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg) { struct net_device *dev = arg; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = NULL; int direction; int send = 0; @@ -1983,7 +1983,7 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg) struct mpcg_info *mpcginfo = arg; struct channel *ch = mpcginfo->ch; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n", @@ -2045,7 +2045,7 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg) struct mpcg_info *mpcginfo = arg; struct channel *ch = mpcginfo->ch; struct net_device *dev = ch->netdev; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n", @@ -2097,7 +2097,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev) __u32 new_len = 0; struct sk_buff *skb; struct qllc *qllcptr; - struct ctcm_priv *priv = dev->priv; + struct ctcm_priv *priv = dev->ml_priv; struct mpc_group *grp = priv->mpcg; CTCM_PR_DEBUG("%s: GROUP STATE: %s\n", From 9b3b9ab6a7a43851ccb4633149d01239f99f275f Mon Sep 17 00:00:00 2001 From: "Klaus-D. Wacker" Date: Thu, 21 Aug 2008 17:10:25 +0200 Subject: [PATCH 191/638] LCS recovery dumps when cable reconnect LCS recovery dumps in irq routine when CCW address in Subchannel Status Word (SCSW) is zero. This occurs when recovery is driven after cable reconnect. Signed-off-by: Klaus-D. Wacker Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/lcs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 6de28385b35..9bcfa04d863 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -1412,7 +1412,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) } /* How far in the ccw chain have we processed? */ if ((channel->state != LCS_CH_STATE_INIT) && - (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC)) { + (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) && + (irb->scsw.cmd.cpa != 0)) { index = (struct ccw1 *) __va((addr_t) irb->scsw.cmd.cpa) - channel->ccws; if ((irb->scsw.cmd.actl & SCSW_ACTL_SUSPENDED) || From f7a54c13c7b072d9426bd5cec1cdb8306df5ef55 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 27 Aug 2008 02:22:07 -0700 Subject: [PATCH 192/638] pkt_sched: Use rcu_assign_pointer() to change dev_queue->qdisc These pointers are RCU protected, so proper primitives should be used. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 +- net/sched/sch_generic.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 341d558b6e3..ad9cda1b8c0 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -635,7 +635,7 @@ static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, if (qdisc == NULL) qdisc = &noop_qdisc; dev_queue->qdisc_sleeping = qdisc; - dev_queue->qdisc = &noop_qdisc; + rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc); spin_unlock_bh(root_lock); diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 5f0ade7806a..9634091ee2f 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -634,7 +634,7 @@ static void dev_deactivate_queue(struct net_device *dev, if (!(qdisc->flags & TCQ_F_BUILTIN)) set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state); - dev_queue->qdisc = qdisc_default; + rcu_assign_pointer(dev_queue->qdisc, qdisc_default); qdisc_reset(qdisc); spin_unlock_bh(qdisc_lock(qdisc)); @@ -709,7 +709,7 @@ static void shutdown_scheduler_queue(struct net_device *dev, struct Qdisc *qdisc_default = _qdisc_default; if (qdisc) { - dev_queue->qdisc = qdisc_default; + rcu_assign_pointer(dev_queue->qdisc, qdisc_default); dev_queue->qdisc_sleeping = qdisc_default; qdisc_destroy(qdisc); From f6f9b93f1624206c802ac9162c9302edaf59bfd9 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 27 Aug 2008 02:25:17 -0700 Subject: [PATCH 193/638] pkt_sched: Fix gen_estimator locks While passing a qdisc root lock to gen_new_estimator() and gen_replace_estimator() dev could be deactivated or even before grafting proper root qdisc as qdisc_sleeping (e.g. qdisc_create), so using qdisc_root_lock() is not enough. This patch adds qdisc_root_sleeping_lock() for this, plus additional checks, where necessary. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/net/sch_generic.h | 8 ++++++++ net/sched/sch_api.c | 14 +++++++++++--- net/sched/sch_cbq.c | 4 ++-- net/sched/sch_hfsc.c | 4 ++-- net/sched/sch_htb.c | 4 ++-- 5 files changed, 25 insertions(+), 9 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index b1d2cfea89c..ef8a7e2e12e 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -217,6 +217,14 @@ static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc) return qdisc_lock(root); } +static inline spinlock_t *qdisc_root_sleeping_lock(struct Qdisc *qdisc) +{ + struct Qdisc *root = qdisc_root_sleeping(qdisc); + + ASSERT_RTNL(); + return qdisc_lock(root); +} + static inline struct net_device *qdisc_dev(struct Qdisc *qdisc) { return qdisc->dev_queue->dev; diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index ad9cda1b8c0..506b709510b 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -830,9 +830,16 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, sch->stab = stab; } if (tca[TCA_RATE]) { + spinlock_t *root_lock; + + if ((sch->parent != TC_H_ROOT) && + !(sch->flags & TCQ_F_INGRESS)) + root_lock = qdisc_root_sleeping_lock(sch); + else + root_lock = qdisc_lock(sch); + err = gen_new_estimator(&sch->bstats, &sch->rate_est, - qdisc_root_lock(sch), - tca[TCA_RATE]); + root_lock, tca[TCA_RATE]); if (err) { /* * Any broken qdiscs that would require @@ -884,7 +891,8 @@ static int qdisc_change(struct Qdisc *sch, struct nlattr **tca) if (tca[TCA_RATE]) gen_replace_estimator(&sch->bstats, &sch->rate_est, - qdisc_root_lock(sch), tca[TCA_RATE]); + qdisc_root_sleeping_lock(sch), + tca[TCA_RATE]); return 0; } diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 8fa90d68ec6..9b720adedea 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1839,7 +1839,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t if (tca[TCA_RATE]) gen_replace_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), + qdisc_root_sleeping_lock(sch), tca[TCA_RATE]); return 0; } @@ -1930,7 +1930,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t if (tca[TCA_RATE]) gen_new_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), tca[TCA_RATE]); + qdisc_root_sleeping_lock(sch), tca[TCA_RATE]); *arg = (unsigned long)cl; return 0; diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index c2b8d9cce3d..c1e77da8cd0 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1045,7 +1045,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid, if (tca[TCA_RATE]) gen_replace_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), + qdisc_root_sleeping_lock(sch), tca[TCA_RATE]); return 0; } @@ -1104,7 +1104,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid, if (tca[TCA_RATE]) gen_new_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), tca[TCA_RATE]); + qdisc_root_sleeping_lock(sch), tca[TCA_RATE]); *arg = (unsigned long)cl; return 0; } diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 0df0df202ed..97d4761cc31 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1372,7 +1372,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, goto failure; gen_new_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), + qdisc_root_sleeping_lock(sch), tca[TCA_RATE] ? : &est.nla); cl->refcnt = 1; cl->children = 0; @@ -1427,7 +1427,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, } else { if (tca[TCA_RATE]) gen_replace_estimator(&cl->bstats, &cl->rate_est, - qdisc_root_lock(sch), + qdisc_root_sleeping_lock(sch), tca[TCA_RATE]); sch_tree_lock(sch); } From fe439dd09d3e4da6a44d35df7371b9c6a2661b99 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 27 Aug 2008 02:27:10 -0700 Subject: [PATCH 194/638] pkt_sched: Fix sch_tree_lock() Use new qdisc_root_sleeping_lock() instead of qdisc_root_lock() as sch_tree_lock() because this lock could be used while dev is deactivated, but we never need to use this with noop_qdisc as a root. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/net/sch_generic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index ef8a7e2e12e..e5569625d2a 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -232,12 +232,12 @@ static inline struct net_device *qdisc_dev(struct Qdisc *qdisc) static inline void sch_tree_lock(struct Qdisc *q) { - spin_lock_bh(qdisc_root_lock(q)); + spin_lock_bh(qdisc_root_sleeping_lock(q)); } static inline void sch_tree_unlock(struct Qdisc *q) { - spin_unlock_bh(qdisc_root_lock(q)); + spin_unlock_bh(qdisc_root_sleeping_lock(q)); } #define tcf_tree_lock(tp) sch_tree_lock((tp)->q) From 7982d5e1b350acb96aa156916c44c25ef87bb809 Mon Sep 17 00:00:00 2001 From: Philip Love Date: Wed, 27 Aug 2008 02:33:50 -0700 Subject: [PATCH 195/638] tcp: fix tcp header size miscalculation when window scale is unused The size of the TCP header is miscalculated when the window scale ends up being 0. Additionally, this can be induced by sending a SYN to a passive open port with a window scale option with value 0. Signed-off-by: Philip Love Signed-off-by: Adam Langley Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index a00532de2a8..8165f5aa8c7 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -468,7 +468,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb, } if (likely(sysctl_tcp_window_scaling)) { opts->ws = tp->rx_opt.rcv_wscale; - size += TCPOLEN_WSCALE_ALIGNED; + if(likely(opts->ws)) + size += TCPOLEN_WSCALE_ALIGNED; } if (likely(sysctl_tcp_sack)) { opts->options |= OPTION_SACK_ADVERTISE; @@ -509,7 +510,8 @@ static unsigned tcp_synack_options(struct sock *sk, if (likely(ireq->wscale_ok)) { opts->ws = ireq->rcv_wscale; - size += TCPOLEN_WSCALE_ALIGNED; + if(likely(opts->ws)) + size += TCPOLEN_WSCALE_ALIGNED; } if (likely(doing_ts)) { opts->options |= OPTION_TS; From d994af0d50efc96b2077978fe9f066992639d525 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 27 Aug 2008 02:35:18 -0700 Subject: [PATCH 196/638] ipv4: mode 0555 in ipv4_skeleton vpnc on today's kernel says Cannot open "/proc/sys/net/ipv4/route/flush": d--------- 0 root root 0 2008-08-26 11:32 /proc/sys/net/ipv4/route d--------- 0 root root 0 2008-08-26 19:16 /proc/sys/net/ipv4/neigh Signed-off-by: Hugh Dickins Acked-by: Al Viro Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index e91bafeb32f..6ee5354c9aa 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3121,9 +3121,9 @@ static struct ctl_table empty[1]; static struct ctl_table ipv4_skeleton[] = { { .procname = "route", .ctl_name = NET_IPV4_ROUTE, - .child = ipv4_route_table}, + .mode = 0555, .child = ipv4_route_table}, { .procname = "neigh", .ctl_name = NET_IPV4_NEIGH, - .child = empty}, + .mode = 0555, .child = empty}, { } }; From c22ce6d849423639b4b80d1b28edd383cb3048a9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 Aug 2008 16:34:35 -0700 Subject: [PATCH 197/638] drivers/net/skfp/ess.c: fix compile warnings CC [M] drivers/net/skfp/ess.o drivers/net/skfp/ess.c: In function 'ess_send_response': drivers/net/skfp/ess.c:513: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c: In function 'ess_send_alc_req': drivers/net/skfp/ess.c:609: warning: cast from pointer to integer of different size drivers/net/skfp/ess.c:639: warning: cast from pointer to integer of different size Signed-off-by: Takashi Iwai Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/skfp/ess.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index 889f9872461..a85efcfd9d0 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -510,7 +510,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm, chg->path.para.p_type = SMT_P320B ; chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; chg->path.mib_index = SBAPATHINDEX ; - chg->path.path_pad = (u_short)NULL ; + chg->path.path_pad = 0; chg->path.path_index = PRIMARY_RING ; /* set P320F */ @@ -606,7 +606,7 @@ static void ess_send_alc_req(struct s_smc *smc) req->path.para.p_type = SMT_P320B ; req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; req->path.mib_index = SBAPATHINDEX ; - req->path.path_pad = (u_short)NULL ; + req->path.path_pad = 0; req->path.path_index = PRIMARY_RING ; /* set P0017 */ @@ -636,7 +636,7 @@ static void ess_send_alc_req(struct s_smc *smc) /* set P19 */ req->a_addr.para.p_type = SMT_P0019 ; req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ; - req->a_addr.sba_pad = (u_short)NULL ; + req->a_addr.sba_pad = 0; req->a_addr.alloc_addr = null_addr ; /* set P1A */ From 17fc7004a3f552b52274b6b2fbbebd7ff76dc1d5 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 8 Aug 2008 16:51:26 -0700 Subject: [PATCH 198/638] igb: remove 82576 quad adapter Disable support for device 8086:10E8. Currently the result of loading the driver with the device present causes system instability. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 1 - drivers/net/igb/e1000_hw.h | 1 - drivers/net/igb/igb_ethtool.c | 9 --------- drivers/net/igb/igb_main.c | 11 ----------- 4 files changed, 22 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index bb823acc744..f5e2e7235fc 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82576: case E1000_DEV_ID_82576_FIBER: case E1000_DEV_ID_82576_SERDES: - case E1000_DEV_ID_82576_QUAD_COPPER: mac->type = e1000_82576; break; default: diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index a65ccc3095c..99504a600a8 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -41,7 +41,6 @@ struct e1000_hw; #define E1000_DEV_ID_82576 0x10C9 #define E1000_DEV_ID_82576_FIBER 0x10E6 #define E1000_DEV_ID_82576_SERDES 0x10E7 -#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 #define E1000_DEV_ID_82575EB_COPPER 0x10A7 #define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 #define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 3eb78a66f8b..58906c984be 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1750,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, /* return success for non excluded adapter ports */ retval = 0; break; - case E1000_DEV_ID_82576_QUAD_COPPER: - /* quad port adapters only support WoL on port A */ - if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) { - wol->supported = 0; - break; - } - /* return success for non excluded adapter ports */ - retval = 0; - break; default: /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index e6eb13a303c..634c4c9d87b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 }, @@ -1217,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; - case E1000_DEV_ID_82576_QUAD_COPPER: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->eeprom_wol = 0; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; } /* initialize the wol settings based on the eeprom settings */ From 50f684b900de431729d6f77e69c941560936f275 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 19 Aug 2008 10:32:06 +0300 Subject: [PATCH 199/638] atl1e: multistatement if missing braces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doesn't cause problems (yet) because err gets zeroed earlier. Signed-off-by: Ilpo Järvinen Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index 82d7be1655d..7685b995ff9 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -2232,10 +2232,11 @@ static int atl1e_resume(struct pci_dev *pdev) AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0); - if (netif_running(netdev)) + if (netif_running(netdev)) { err = atl1e_request_irq(adapter); if (err) return err; + } atl1e_reset_hw(&adapter->hw); From 82c26a9d117f0178b8c1b33429014b6d99c470f6 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Mon, 18 Aug 2008 19:28:13 -0500 Subject: [PATCH 200/638] atl1: disable TSO by default The atl1 driver is causing stalled connections and file corruption whenever TSO is enabled. Two examples are here: http://lkml.org/lkml/2008/7/15/325 http://lkml.org/lkml/2008/8/18/543 Disable TSO by default until we can determine the source of the problem. Signed-off-by: Jay Cliburn cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index e6a7bb79d4d..e23ce77712f 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3022,7 +3022,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev, netdev->features = NETIF_F_HW_CSUM; netdev->features |= NETIF_F_SG; netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX); - netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_LLTX; /* From 95eacee870a521d2647f42c4f670cd65a145a6bd Mon Sep 17 00:00:00 2001 From: Denis Joseph Barrow Date: Tue, 19 Aug 2008 18:07:52 -0700 Subject: [PATCH 201/638] [netdrvr] hso: icon 322 detection fix Fixes Icon-322 detection. Signed-off-by: Denis Joseph Barrow Cc: Jeff Garzik Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1b7cac77159..1131e10fb6a 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -397,7 +397,7 @@ static const struct usb_device_id hso_ids[] = { {default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */ {icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */ {icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */ - {default_port_device(0x0af0, 0xd033)}, /* Icon-322 */ + {icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */ {USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */ {USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */ {USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */ From c213f286f2cf6590f83f541f66a625ee8d20c6f4 Mon Sep 17 00:00:00 2001 From: Denis Joseph Barrow Date: Tue, 19 Aug 2008 18:07:55 -0700 Subject: [PATCH 202/638] [netdrvr] hso: dev_kfree_skb crash fix Fixes dev_kfree_skb happening too many times when hso_start_net_device is called from hso_resume. Signed-off-by: Denis Joseph Barrow Cc: Jeff Garzik Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1131e10fb6a..6e42b5a8c22 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2613,6 +2613,7 @@ static int hso_resume(struct usb_interface *iface) "Transmitting lingering data\n"); hso_net_start_xmit(hso_net->skb_tx_buf, hso_net->net); + hso_net->skb_tx_buf = NULL; } result = hso_start_net_device(network_table[i]); if (result) From 45e15bb734e4e559ab32f26196e44d5cf1417f10 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Wed, 20 Aug 2008 13:09:19 -0600 Subject: [PATCH 203/638] ibmveth: fix bad UDP checksums This patch fixes a ibmveth bug where bad UDP checksums are being transmitted when checksum offloading is enabled. The hypervisor does checksum offloading only on TCP packets, so ibmveth calls skb_checksum_help() for any other protocol. The bug happens because the packet is being modified after the DMA map, so we would need a memory barrier before making the hypervisor call. Reordering the code so that the DMA map happens after skb_checksum_help() has the additional advantage of fixing a DMA map leak if skb_checksum_help() where to fail. Signed-off-by: Santiago Leon Signed-off-by: Jeff Garzik --- drivers/net/ibmveth.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index a03fe1fb61c..c2d57f83608 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -904,8 +904,6 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) unsigned long data_dma_addr; desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len; - data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, - skb->len, DMA_TO_DEVICE); if (skb->ip_summed == CHECKSUM_PARTIAL && ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) { @@ -924,6 +922,8 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) buf[1] = 0; } + data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, + skb->len, DMA_TO_DEVICE); if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) { if (!firmware_has_feature(FW_FEATURE_CMO)) ibmveth_error_printk("tx: unable to map xmit buffer\n"); @@ -932,6 +932,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev) desc.fields.address = adapter->bounce_buffer_dma; tx_map_failed++; used_bounce = 1; + wmb(); } else desc.fields.address = data_dma_addr; From 6fc30db563c57e383ca2ec836d8c9208c52d265a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 27 Aug 2008 05:54:30 -0400 Subject: [PATCH 204/638] [netdrvr] smc91x: fix resource removal (null ptr deref) Properly handle resource cleanup on unplug/exit. Spotted by Jonathan Cameron Signed-off-by: Jeff Garzik --- drivers/net/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 2040965d772..24768c10cad 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2255,7 +2255,7 @@ static int smc_drv_remove(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs"); if (!res) - platform_get_resource(pdev, IORESOURCE_MEM, 0); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(res->start, SMC_IO_EXTENT); free_netdev(ndev); From 8382cc1c2d0eb8918d3b71bf6cb8ac2e883f3e33 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 23 Aug 2008 22:02:23 +0200 Subject: [PATCH 205/638] net/usb/mcs7830: new device IDs This adds USB device IDs for MosChip 7730 and Sitecom LN030 to the mcs7830 driver. The IDs have been reported to work without further modifications. Signed-off-by: Arnd Bergmann Acked-by: David Brownell Cc: Viktor Horvath Cc: Robbert Wethmar Cc: Bart van der Klip Signed-off-by: Jeff Garzik --- drivers/net/usb/mcs7830.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index c3d119f997f..ebf1332abaa 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -46,6 +46,10 @@ #define MCS7830_VENDOR_ID 0x9710 #define MCS7830_PRODUCT_ID 0x7830 +#define MCS7730_PRODUCT_ID 0x7730 + +#define SITECOM_VENDOR_ID 0x0DF6 +#define LN_030_PRODUCT_ID 0x0021 #define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \ ADVERTISE_100HALF | ADVERTISE_10FULL | \ @@ -491,7 +495,16 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb) } static const struct driver_info moschip_info = { - .description = "MOSCHIP 7830 usb-NET adapter", + .description = "MOSCHIP 7830/7730 usb-NET adapter", + .bind = mcs7830_bind, + .rx_fixup = mcs7830_rx_fixup, + .flags = FLAG_ETHER, + .in = 1, + .out = 2, +}; + +static const struct driver_info sitecom_info = { + .description = "Sitecom LN-30 usb-NET adapter", .bind = mcs7830_bind, .rx_fixup = mcs7830_rx_fixup, .flags = FLAG_ETHER, @@ -504,6 +517,14 @@ static const struct usb_device_id products[] = { USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID), .driver_info = (unsigned long) &moschip_info, }, + { + USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID), + .driver_info = (unsigned long) &moschip_info, + }, + { + USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID), + .driver_info = (unsigned long) &sitecom_info, + }, {}, }; MODULE_DEVICE_TABLE(usb, products); From 1025433147e635af9cd150676a097396cf666ddb Mon Sep 17 00:00:00 2001 From: Oliver Martin Date: Sat, 23 Aug 2008 22:08:47 +0200 Subject: [PATCH 206/638] net/usb/mcs7830: add set_mac_address Implement set_mac_address for mcs7830. This enables me to use it with my cable modem. Signed-off-by: Oliver Martin Signed-off-by: Arnd Bergmann Signed-off-by: Jeff Garzik --- drivers/net/usb/mcs7830.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index ebf1332abaa..ca9d00c1194 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -446,6 +446,29 @@ static struct ethtool_ops mcs7830_ethtool_ops = { .nway_reset = usbnet_nway_reset, }; +static int mcs7830_set_mac_address(struct net_device *netdev, void *p) +{ + int ret; + struct usbnet *dev = netdev_priv(netdev); + struct sockaddr *addr = p; + + if (netif_running(netdev)) + return -EBUSY; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, + netdev->dev_addr); + + if (ret < 0) + return ret; + + return 0; +} + static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) { struct net_device *net = dev->net; @@ -459,6 +482,7 @@ static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev) net->ethtool_ops = &mcs7830_ethtool_ops; net->set_multicast_list = mcs7830_set_multicast; mcs7830_set_multicast(net); + net->set_mac_address = mcs7830_set_mac_address; /* reserve space for the status byte on rx */ dev->rx_urb_size = ETH_FRAME_LEN + 1; From edcfe5f7e307846e578fb88d69fa27051fded0ab Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 20 Aug 2008 16:34:37 -0700 Subject: [PATCH 207/638] forcedeth: fix checksum flag Fix the checksum feature advertised in device flags. The hardware support TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers). However, the kernel feature flags do not distinguish IPv6 with/without extension headers. Therefore, the driver needs to use NETIF_F_IP_CSUM instead of NETIF_F_HW_CSUM since the latter includes all IPv6 packets. A future patch can be created to check for extension headers and perform software checksum calculation. Signed-off-by: Ayaz Abdulla Cc: Jeff Garzik Cc: Manfred Spraul [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 053971e5fc9..331b86b01fa 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5522,7 +5522,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (id->driver_data & DEV_HAS_CHECKSUM) { np->rx_csum = 1; np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK; - dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; dev->features |= NETIF_F_TSO; } @@ -5835,7 +5835,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n", dev->features & NETIF_F_HIGHDMA ? "highdma " : "", - dev->features & (NETIF_F_HW_CSUM | NETIF_F_SG) ? + dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ? "csum " : "", dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ? "vlan " : "", From ab9399059bb85a94758f42fb25607e440e926cc6 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 19 Aug 2008 21:12:45 +0200 Subject: [PATCH 208/638] net: don't grab a mutex within a timer context in gianfar I got the following backtrace while network was unavailble: |NETDEV WATCHDOG: eth0: transmit timed out |BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87 |in_atomic():1, irqs_disabled():0 |Call Trace: |[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable) |[c0383db0] [c001e938] __might_sleep+0xe0/0xf4 |[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c |[c0383de0] [c019005c] phy_stop+0x20/0x70 |[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4 |[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60 |[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144 |[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8 |[c0383e60] [c002b084] __do_softirq+0x5c/0xc4 |[c0383e80] [c00046fc] do_softirq+0x3c/0x54 |[c0383e90] [c002ac60] irq_exit+0x3c/0x5c |[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8 |[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18 |[c0383f80] [c000804c] cpu_idle+0xcc/0xdc |[c0383fa0] [c025c07c] etext+0x7c/0x90 |[c0383fc0] [c0338960] start_kernel+0x294/0x2a8 |[c0383ff0] [c00003dc] skpinv+0x304/0x340 |------------[ cut here ]------------ The phylock was once a spinlock but got changed into a mutex via commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping] Signed-off-by: Sebastian Siewior Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 22 ++++++++++++++++++---- drivers/net/gianfar.h | 1 + 2 files changed, 19 insertions(+), 4 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 999d6916827..4320a983a58 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -105,6 +105,7 @@ const char gfar_driver_version[] = "1.3"; static int gfar_enet_open(struct net_device *dev); static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev); +static void gfar_reset_task(struct work_struct *work); static void gfar_timeout(struct net_device *dev); static int gfar_close(struct net_device *dev); struct sk_buff *gfar_new_skb(struct net_device *dev); @@ -209,6 +210,7 @@ static int gfar_probe(struct platform_device *pdev) spin_lock_init(&priv->txlock); spin_lock_init(&priv->rxlock); spin_lock_init(&priv->bflock); + INIT_WORK(&priv->reset_task, gfar_reset_task); platform_set_drvdata(pdev, dev); @@ -1212,6 +1214,7 @@ static int gfar_close(struct net_device *dev) napi_disable(&priv->napi); + cancel_work_sync(&priv->reset_task); stop_gfar(dev); /* Disconnect from the PHY */ @@ -1326,13 +1329,16 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) return 0; } -/* gfar_timeout gets called when a packet has not been +/* gfar_reset_task gets scheduled when a packet has not been * transmitted after a set amount of time. * For now, assume that clearing out all the structures, and - * starting over will fix the problem. */ -static void gfar_timeout(struct net_device *dev) + * starting over will fix the problem. + */ +static void gfar_reset_task(struct work_struct *work) { - dev->stats.tx_errors++; + struct gfar_private *priv = container_of(work, struct gfar_private, + reset_task); + struct net_device *dev = priv->dev; if (dev->flags & IFF_UP) { stop_gfar(dev); @@ -1342,6 +1348,14 @@ static void gfar_timeout(struct net_device *dev) netif_tx_schedule_all(dev); } +static void gfar_timeout(struct net_device *dev) +{ + struct gfar_private *priv = netdev_priv(dev); + + dev->stats.tx_errors++; + schedule_work(&priv->reset_task); +} + /* Interrupt Handler for Transmit complete */ static int gfar_clean_tx_ring(struct net_device *dev) { diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index d59df98bd63..f46e9b63af1 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -756,6 +756,7 @@ struct gfar_private { uint32_t msg_enable; + struct work_struct reset_task; /* Network Statistics */ struct gfar_extra_stats extra_stats; }; From e8296582783a9f3bf75dbeb98dfdae15fd45c008 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 Aug 2008 07:29:23 +1000 Subject: [PATCH 209/638] ibm_newemac: Don't call dev_mc_add() before device is registered We must not call dev_mc_add() from within our HW configure which happens before we initialize and register the netdev. Do it in open() instead. Thanks to Sebastian Siewior for tracking it down. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 2e720f26ca8..ccd9d9058f6 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -663,9 +663,6 @@ static int emac_configure(struct emac_instance *dev) if (emac_phy_gpcs(dev->phy.mode)) emac_mii_reset_phy(&dev->phy); - /* Required for Pause packet support in EMAC */ - dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1); - return 0; } @@ -1150,6 +1147,9 @@ static int emac_open(struct net_device *ndev) } else netif_carrier_on(dev->ndev); + /* Required for Pause packet support in EMAC */ + dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1); + emac_configure(dev); mal_poll_add(dev->mal, &dev->commac); mal_enable_tx_channel(dev->mal, dev->mal_tx_chan); From 211cd45ac71dcd40d473fddf9a49cb1085173cb1 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 15 Aug 2008 08:02:58 +0200 Subject: [PATCH 210/638] qeth: use -EOPNOTSUPP instead of -ENOTSUPP. return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_l3_sys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index ac1993708ae..210ddb63974 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -136,7 +136,7 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, return -EINVAL; if (!qeth_is_supported(card, IPA_IPV6)) { - return -ENOTSUPP; + return -EOPNOTSUPP; } return qeth_l3_dev_route_store(card, &card->options.route6, From 7db2266a374d66f5ac85334c922cb37d76939cc5 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 15 Aug 2008 08:02:59 +0200 Subject: [PATCH 211/638] qeth: l2 write unicast list to hardware In case the netdev unicast list contains additional entries we have to register/deregister them. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_core.h | 1 + drivers/s390/net/qeth_l2_main.c | 27 ++++++++++++++++++++++----- 2 files changed, 23 insertions(+), 5 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 80971c21ea1..bf8a75c92f2 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -689,6 +689,7 @@ struct qeth_mc_mac { struct list_head list; __u8 mc_addr[MAX_ADDR_LEN]; unsigned char mc_addrlen; + int is_vmac; }; struct qeth_card { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index b3cee032f57..3ac3cc1e03c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -177,9 +177,10 @@ static int qeth_l2_send_delgroupmac(struct qeth_card *card, __u8 *mac) qeth_l2_send_delgroupmac_cb); } -static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) +static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac, int vmac) { struct qeth_mc_mac *mc; + int rc; mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC); @@ -188,8 +189,16 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) memcpy(mc->mc_addr, mac, OSA_ADDR_LEN); mc->mc_addrlen = OSA_ADDR_LEN; + mc->is_vmac = vmac; - if (!qeth_l2_send_setgroupmac(card, mac)) + if (vmac) { + rc = qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC, + NULL); + } else { + rc = qeth_l2_send_setgroupmac(card, mac); + } + + if (!rc) list_add_tail(&mc->list, &card->mc_list); else kfree(mc); @@ -201,7 +210,11 @@ static void qeth_l2_del_all_mc(struct qeth_card *card) spin_lock_bh(&card->mclock); list_for_each_entry_safe(mc, tmp, &card->mc_list, list) { - qeth_l2_send_delgroupmac(card, mc->mc_addr); + if (mc->is_vmac) + qeth_l2_send_setdelmac(card, mc->mc_addr, + IPA_CMD_DELVMAC, NULL); + else + qeth_l2_send_delgroupmac(card, mc->mc_addr); list_del(&mc->list); kfree(mc); } @@ -590,7 +603,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) static void qeth_l2_set_multicast_list(struct net_device *dev) { struct qeth_card *card = dev->ml_priv; - struct dev_mc_list *dm; + struct dev_addr_list *dm; if (card->info.type == QETH_CARD_TYPE_OSN) return ; @@ -599,7 +612,11 @@ static void qeth_l2_set_multicast_list(struct net_device *dev) qeth_l2_del_all_mc(card); spin_lock_bh(&card->mclock); for (dm = dev->mc_list; dm; dm = dm->next) - qeth_l2_add_mc(card, dm->dmi_addr); + qeth_l2_add_mc(card, dm->da_addr, 0); + + for (dm = dev->uc_list; dm; dm = dm->next) + qeth_l2_add_mc(card, dm->da_addr, 1); + spin_unlock_bh(&card->mclock); if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) return; From bd8774c841aa5162d1d6837b3d21f4dcee71f36a Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 15 Aug 2008 08:03:00 +0200 Subject: [PATCH 212/638] qeth: preallocated header account offset When a preallocated header qdio buffer is filled we have to account the offset for the data length. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_core_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index bd420d1b9a0..c7ab1b86451 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3024,7 +3024,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, int offset) { - int length = skb->len; + int length = skb->len - offset; int length_here; int element; char *data; From 17393dd67c06c3912ff47b31268b648929715336 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 14 Aug 2008 18:27:23 +0200 Subject: [PATCH 213/638] e100, fix iomap read There were 2 omitted readb's used on an iomap space. eliminate them by using ioread8 instead. Signed-off-by: Jiri Slaby Cc: Jeff Kirsher Cc: Jesse Brandeburg Cc: Bruce Allan Cc: PJ Waskiewicz Cc: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 19d32a227be..453115acaad 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1838,7 +1838,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, if ((le16_to_cpu(rfd->command) & cb_el) && (RU_RUNNING == nic->ru_running)) - if (readb(&nic->csr->scb.status) & rus_no_res) + if (ioread8(&nic->csr->scb.status) & rus_no_res) nic->ru_running = RU_SUSPENDED; return -ENODATA; } @@ -1861,7 +1861,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, if ((le16_to_cpu(rfd->command) & cb_el) && (RU_RUNNING == nic->ru_running)) { - if (readb(&nic->csr->scb.status) & rus_no_res) + if (ioread8(&nic->csr->scb.status) & rus_no_res) nic->ru_running = RU_SUSPENDED; } From f2455eb176ac87081bbfc9a44b21c7cd2bc1967e Mon Sep 17 00:00:00 2001 From: Eugene Teo Date: Wed, 27 Aug 2008 04:50:30 -0700 Subject: [PATCH 214/638] wan: Missing capability checks in sbni_ioctl() There are missing capability checks in the following code: 1300 static int 1301 sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd) 1302 { [...] 1319 case SIOCDEVRESINSTATS : 1320 if( current->euid != 0 ) /* root only */ 1321 return -EPERM; [...] 1336 case SIOCDEVSHWSTATE : 1337 if( current->euid != 0 ) /* root only */ 1338 return -EPERM; [...] 1357 case SIOCDEVENSLAVE : 1358 if( current->euid != 0 ) /* root only */ 1359 return -EPERM; [...] 1372 case SIOCDEVEMANSIPATE : 1373 if( current->euid != 0 ) /* root only */ 1374 return -EPERM; Here's my proposed fix: Missing capability checks. Signed-off-by: Eugene Teo Signed-off-by: David S. Miller --- drivers/net/wan/sbni.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index e59255a155a..6596cd0742b 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -1317,7 +1317,7 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd ) break; case SIOCDEVRESINSTATS : - if( current->euid != 0 ) /* root only */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) ); break; @@ -1334,7 +1334,7 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd ) break; case SIOCDEVSHWSTATE : - if( current->euid != 0 ) /* root only */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; spin_lock( &nl->lock ); @@ -1355,7 +1355,7 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd ) #ifdef CONFIG_SBNI_MULTILINE case SIOCDEVENSLAVE : - if( current->euid != 0 ) /* root only */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name )) @@ -1370,7 +1370,7 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd ) return enslave( dev, slave_dev ); case SIOCDEVEMANSIPATE : - if( current->euid != 0 ) /* root only */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; return emancipate( dev ); From b6a7e4c032d8ec712f48cf35145a564aa6503eb7 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Sat, 15 Dec 2007 07:47:46 +0100 Subject: [PATCH 215/638] [ARM] OMAP: Change mailing list for OMAP in MAINTAINERS OMAP has now a list at vger. Signed-off-by: Dirk Behme Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 28c69aaefcd..c4ca99cf80d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4005,7 +4005,7 @@ S: Maintained TI OMAP MMC INTERFACE DRIVER P: Carlos Aguiar, Anderson Briglia and Syed Khasim -M: linux-omap-open-source@linux.omap.com (subscribers only) +M: linux-omap@vger.kernel.org W: http://linux.omap.com W: http://www.muru.com/linux/omap/ S: Maintained From 9c2d015712ff1deb7ae5f95ef1fd9b5557520bc1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Aug 2008 14:22:13 +0100 Subject: [PATCH 216/638] [ARM] OMAP: Add and update OMAP default configuration files Update omap_h2_1610 and omap_osk_5912 default configurations. Add ams delta, n770, omap 2430sdp, apollon_2420, generic 1510, 1610, 1710, 2420, h4 2420, innovator 1510 and 1610, perseus2 730, palte, palmtt, palmz71 and sx1 default configurations. Pulled out of the omap zoom tree. Signed-off-by: Russell King --- arch/arm/configs/ams_delta_defconfig | 1314 +++++++++++++++ arch/arm/configs/n770_defconfig | 1421 +++++++++++++++++ arch/arm/configs/omap_2430sdp_defconfig | 1304 +++++++++++++++ arch/arm/configs/omap_apollon_2420_defconfig | 962 +++++++++++ arch/arm/configs/omap_generic_1510_defconfig | 1172 ++++++++++++++ arch/arm/configs/omap_generic_1610_defconfig | 1178 ++++++++++++++ arch/arm/configs/omap_generic_1710_defconfig | 1088 +++++++++++++ arch/arm/configs/omap_generic_2420_defconfig | 655 ++++++++ arch/arm/configs/omap_h2_1610_defconfig | 515 ++++-- arch/arm/configs/omap_h4_2420_defconfig | 1120 +++++++++++++ .../arm/configs/omap_innovator_1510_defconfig | 1253 +++++++++++++++ .../arm/configs/omap_innovator_1610_defconfig | 839 ++++++++++ arch/arm/configs/omap_osk_5912_defconfig | 169 +- arch/arm/configs/omap_perseus2_730_defconfig | 928 +++++++++++ arch/arm/configs/palmte_defconfig | 761 +++++++++ arch/arm/configs/palmtt_defconfig | 844 ++++++++++ arch/arm/configs/palmz71_defconfig | 891 +++++++++++ arch/arm/configs/sx1_defconfig | 1118 +++++++++++++ 18 files changed, 17311 insertions(+), 221 deletions(-) create mode 100644 arch/arm/configs/ams_delta_defconfig create mode 100644 arch/arm/configs/n770_defconfig create mode 100644 arch/arm/configs/omap_2430sdp_defconfig create mode 100644 arch/arm/configs/omap_apollon_2420_defconfig create mode 100644 arch/arm/configs/omap_generic_1510_defconfig create mode 100644 arch/arm/configs/omap_generic_1610_defconfig create mode 100644 arch/arm/configs/omap_generic_1710_defconfig create mode 100644 arch/arm/configs/omap_generic_2420_defconfig create mode 100644 arch/arm/configs/omap_h4_2420_defconfig create mode 100644 arch/arm/configs/omap_innovator_1510_defconfig create mode 100644 arch/arm/configs/omap_innovator_1610_defconfig create mode 100644 arch/arm/configs/omap_perseus2_730_defconfig create mode 100644 arch/arm/configs/palmte_defconfig create mode 100644 arch/arm/configs/palmtt_defconfig create mode 100644 arch/arm/configs/palmz71_defconfig create mode 100644 arch/arm/configs/sx1_defconfig diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig new file mode 100644 index 00000000000..2c4aa11f0b0 --- /dev/null +++ b/arch/arm/configs/ams_delta_defconfig @@ -0,0 +1,1314 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 04:28:32 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=m +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=m +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +# CONFIG_OMAP_DSP_FBEXPORT is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +CONFIG_MACH_AMS_DELTA=y +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_168MHZ is not set +CONFIG_OMAP_ARM_150MHZ=y +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_AMS_DELTA=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Token Ring devices +# + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=y +CONFIG_USB_KAWETH=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_AMS_DELTA=y +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_CLEAN_4x6 is not set +# CONFIG_FONT_CLEAN_5x8 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig new file mode 100644 index 00000000000..568ef1770d5 --- /dev/null +++ b/arch/arm/configs/n770_defconfig @@ -0,0 +1,1421 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc8-omap1 +# Fri Jan 18 10:21:06 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_SRAM_PATCH=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +CONFIG_OMAP_COMPONENT_VERSION=y +CONFIG_OMAP_GPIO_SWITCH=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_STI=y +CONFIG_OMAP_STI_CONSOLE=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=y +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +CONFIG_MACH_NOKIA770=y +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +CONFIG_OMAP_ARM_216MHZ=y +# CONFIG_OMAP_ARM_192MHZ is not set +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +CONFIG_BT_HCIBRF6150=y +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +# CONFIG_PROC_EVENTS is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP_HW=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +CONFIG_SENSORS_TLV320AIC23=y +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_OMAP=y +CONFIG_FB_OMAP_LCDC_EXTERNAL=y +CONFIG_FB_OMAP_LCDC_HWA742=y +# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set +CONFIG_FB_OMAP_MANUAL_UPDATE=y +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_DUMMY=y +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_OMAP_AIC23=y +# CONFIG_SND_OMAP_TSC2101 is not set +# CONFIG_SND_SX1 is not set +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# SPI devices +# + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=y +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_FILE_STORAGE_TEST=y +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +# CONFIG_MMC_SPI is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# CBUS support +# +CONFIG_CBUS=y +CONFIG_CBUS_TAHVO=y +CONFIG_CBUS_TAHVO_USER=y +CONFIG_CBUS_TAHVO_USB=y +# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set +CONFIG_CBUS_RETU=y +CONFIG_CBUS_RETU_USER=y +CONFIG_CBUS_RETU_POWERBUTTON=y +CONFIG_CBUS_RETU_RTC=y +CONFIG_CBUS_RETU_WDT=y +# CONFIG_CBUS_RETU_HEADSET is not set +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +CONFIG_OMAP_DSP_FBEXPORT=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_LOWMEM is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig new file mode 100644 index 00000000000..b0617c0da2a --- /dev/null +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -0,0 +1,1304 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:47:37 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +# CONFIG_OMAP_MUX_WARNINGS is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +# CONFIG_ARCH_OMAP2420 is not set +CONFIG_ARCH_OMAP2430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +CONFIG_MACH_OMAP_2430SDP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_OMAP is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_GPIO=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MENELAUS is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_OMAP24XX is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 243x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP_HS=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig new file mode 100644 index 00000000000..bb39dfc72d6 --- /dev/null +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -0,0 +1,962 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 12:07:29 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +# CONFIG_OMAP_MCBSP is not set +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +CONFIG_MACH_OMAP_APOLLON=y +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set +CONFIG_MTD_ONENAND_GENERIC=y +# CONFIG_MTD_ONENAND_OMAP2 is not set +# CONFIG_MTD_ONENAND_OTP is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +# CONFIG_HID is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig new file mode 100644 index 00000000000..4b1c252f209 --- /dev/null +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -0,0 +1,1172 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 12:20:19 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +# CONFIG_USB_ALI_M5632 is not set +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig new file mode 100644 index 00000000000..fc66f019d56 --- /dev/null +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -0,0 +1,1178 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 13:01:27 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig new file mode 100644 index 00000000000..0a00a708a4f --- /dev/null +++ b/arch/arm/configs/omap_generic_1710_defconfig @@ -0,0 +1,1088 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 13:02:08 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_ARTHUR=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_BELKIN is not set +# CONFIG_USB_ARMLINUX is not set +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_SECURITY_LOWMEM is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig new file mode 100644 index 00000000000..cf4073b47aa --- /dev/null +++ b/arch/arm/configs/omap_generic_2420_defconfig @@ -0,0 +1,655 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:44:48 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_USER_NS is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_DSP is not set +CONFIG_MACH_OMAP_GENERIC=y + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x10C08000 +CONFIG_ZBOOT_ROM_BSS=0x10200000 +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 323c1deeb95..c03507202f3 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Mon Mar 3 03:39:48 2008 +# Linux kernel version: 2.6.25-rc2-omap1 +# Wed Feb 20 17:12:36 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y @@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -65,6 +64,7 @@ CONFIG_SYSCTL=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP_OTG=y CONFIG_ARCH_OMAP1=y # CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set # # OMAP Feature Selections # +CONFIG_OMAP_DEBUG_SRAM_PATCH=y # CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +CONFIG_OMAP_GPIO_SWITCH=y CONFIG_OMAP_MUX=y -# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 -# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_DM_TIMER=y CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set @@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y # # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set # CONFIG_OMAP_ARM_216MHZ is not set -CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_192MHZ is not set # CONFIG_OMAP_ARM_168MHZ is not set # CONFIG_OMAP_ARM_120MHZ is not set -# CONFIG_OMAP_ARM_60MHZ is not set +CONFIG_OMAP_ARM_60MHZ=y # CONFIG_OMAP_ARM_30MHZ is not set # @@ -227,6 +235,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y +# CONFIG_PREEMPT is not set CONFIG_HZ=128 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -# CONFIG_LEDS is not set +CONFIG_LEDS=y +# CONFIG_LEDS_CPU is not set CONFIG_ALIGNMENT_TRAP=y # @@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # CONFIG_ATAGS_PROC is not set @@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh" # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ is not set # # Floating point emulation @@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set # # Power management options @@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +CONFIG_DEBUG_DRIVER=y +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=3 +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_OMAP_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y @@ -509,6 +554,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support @@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_ISP1301_OMAP is not set +CONFIG_ISP1301_OMAP=y CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -659,8 +718,26 @@ CONFIG_TPS65010=y # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +CONFIG_SPI_TSC2101=y +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -673,7 +750,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -683,6 +759,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -712,6 +789,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -722,6 +800,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_OMAP_WATCHDOG is not set +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + # # Sonics Silicon Backplane # @@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_OMAP is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y +# CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y +# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +# CONFIG_MMC_SPI is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set +# CONFIG_OMAP_DSP is not set # # File systems @@ -894,6 +1141,17 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y # CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set @@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set # # Security options @@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y # CONFIG_CRYPTO_SEQIV is not set -CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1052,6 +1332,7 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig new file mode 100644 index 00000000000..5bc89185a64 --- /dev/null +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -0,0 +1,1120 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:44:58 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_DEVICES=y +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +CONFIG_MACH_OMAP_H4=y +# CONFIG_MACH_OMAP_H4_TUSB is not set +# CONFIG_MACH_OMAP_H4_OTG is not set +# CONFIG_MACH_OMAP2_H4_USB1 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=y +CONFIG_IRCOMM=y +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_OMAP_IR=y +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_GPIOEXPANDER_OMAP=y +# CONFIG_TWL4030_CORE is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +CONFIG_MENELAUS=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig new file mode 100644 index 00000000000..55b2611bd90 --- /dev/null +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -0,0 +1,1253 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:02 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_INNOVATOR=y +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET_MII=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +CONFIG_OMAP_PS2=m +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_OMAP is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig new file mode 100644 index 00000000000..95d9f2be53e --- /dev/null +++ b/arch/arm/configs/omap_innovator_1610_defconfig @@ -0,0 +1,839 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:05 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_INNOVATOR=y +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_CPU_DCACHE_WRITETHROUGH=y +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index d4ca5e6e4ff..b68e0144cab 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Mon Mar 3 03:35:17 2008 +# Linux kernel version: 2.6.24-rc3-omap1 +# Fri Nov 23 12:24:12 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_NAMESPACES=y -# CONFIG_UTS_NS is not set -# CONFIG_IPC_NS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System Type @@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_MSM7X00A is not set # # TI OMAP Implementations @@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP_OTG=y CONFIG_ARCH_OMAP1=y # CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set # # OMAP Feature Selections # +CONFIG_OMAP_DEBUG_SRAM_PATCH=y CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set # CONFIG_OMAP_MPU_TIMER is not set CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 @@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set # # OMAP Core Type @@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y # # OMAP Board Type # -CONFIG_MACH_OMAP_INNOVATOR=y -CONFIG_MACH_OMAP_H2=y -CONFIG_MACH_OMAP_H3=y +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set CONFIG_MACH_OMAP_OSK=y # CONFIG_OMAP_OSK_MISTRAL is not set -CONFIG_MACH_NOKIA770=y -CONFIG_MACH_OMAP_GENERIC=y +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set # # OMAP CPU Speed @@ -227,6 +216,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +# CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=128 -CONFIG_AEABI=y -CONFIG_OABI_COMPAT=y +# CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set -# CONFIG_ATAGS_PROC is not set # # CPU Frequency scaling @@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set # # Power management options @@ -328,10 +317,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -348,7 +336,6 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -CONFIG_HAVE_IDE=y CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set @@ -578,7 +563,6 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y +# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set -# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y @@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y # # Miscellaneous I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -755,7 +743,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -783,7 +770,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -791,7 +777,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # # Multimedia devices @@ -822,11 +806,11 @@ CONFIG_DAB=y # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y +# CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_OMAP is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -890,15 +878,28 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# +# Enable Host or Gadget support to see Inventra options +# + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# USB Gadget Support +# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# +# CBUS support +# +# CONFIG_CBUS is not set + # # File systems # @@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_DNOTIFY=y +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking @@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y # CONFIG_SAMPLES is not set @@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_LZO is not set -CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO is not set # # Library routines diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig new file mode 100644 index 00000000000..b94800c0e00 --- /dev/null +++ b/arch/arm/configs/omap_perseus2_730_defconfig @@ -0,0 +1,928 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc6-omap1 +# Tue Sep 18 11:45:12 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP730=y +# CONFIG_ARCH_OMAP15XX is not set +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +CONFIG_MACH_OMAP_PERSEUS2=y +# CONFIG_MACH_OMAP_FSAMPLE is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_195MHZ is not set +CONFIG_OMAP_ARM_182MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_OMAP is not set +CONFIG_FB_VIRTUAL=y + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig new file mode 100644 index 00000000000..40fc6a778e0 --- /dev/null +++ b/arch/arm/configs/palmte_defconfig @@ -0,0 +1,761 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Sat May 19 11:04:27 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_UTS_NS is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +CONFIG_OMAP_GPIO_SWITCH=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +CONFIG_MACH_OMAP_PALMTE=y +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# ISDN subsystem +# + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_OMAP_RTC=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=y +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig new file mode 100644 index 00000000000..e54ced41217 --- /dev/null +++ b/arch/arm/configs/palmtt_defconfig @@ -0,0 +1,844 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19-rc3-omap1 +# Sun Oct 29 00:36:12 2006 +# +CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +CONFIG_OMAP_LL_DEBUG_UART2=y +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +CONFIG_OMAP_DSP_FBEXPORT=y + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +CONFIG_MACH_OMAP_PALMTT=y +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=320 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_OMAP_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_TSC2102 is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_OMAP=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_OMAP=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +CONFIG_RTC_DRV_OMAP=y +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# Synchronous Serial Interfaces (SSI) +# +# CONFIG_OMAP_UWIRE is not set +# CONFIG_OMAP_TSC2101 is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig new file mode 100644 index 00000000000..6361922e71c --- /dev/null +++ b/arch/arm/configs/palmz71_defconfig @@ -0,0 +1,891 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 05:13:00 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-z71" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +CONFIG_MACH_OMAP_PALMZ71=y +# CONFIG_MACH_OMAP_PALMTT is not set +# CONFIG_MACH_SX1 is not set +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=320 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_TSC2046 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_TSC210X is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_OMAP=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig new file mode 100644 index 00000000000..853dcdd9f2e --- /dev/null +++ b/arch/arm/configs/sx1_defconfig @@ -0,0 +1,1118 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.22-rc1-omap1 +# Thu Jun 7 05:16:10 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +CONFIG_OMAP_GPIO_SWITCH=y +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_MMU_FWK=y +CONFIG_OMAP_MBOX_FWK=y +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_LCD is not set +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_OMAP_DSP=y +# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set +# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set +# CONFIG_OMAP_DSP_FBEXPORT is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +CONFIG_ARCH_OMAP15XX=y +# CONFIG_ARCH_OMAP16XX is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_VOICEBLUE is not set +# CONFIG_MACH_OMAP_PALMTE is not set +# CONFIG_MACH_OMAP_PALMZ71 is not set +# CONFIG_MACH_OMAP_PALMTT is not set +CONFIG_MACH_SX1=y +# CONFIG_MACH_AMS_DELTA is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_150MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM925T=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=y +# CONFIG_PROC_EVENTS is not set +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Token Ring devices +# + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set +# CONFIG_HWMON is not set + +# +# Misc devices +# +# CONFIG_BLINK is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_LCD_MIPID is not set +CONFIG_FB_OMAP_BOOTLOADER_INIT=y +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_CLEAN_4x6 is not set +# CONFIG_FONT_CLEAN_5x8 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_OMAP_AIC23 is not set +# CONFIG_SND_OMAP_TSC2101 is not set +CONFIG_SND_SX1=y +# CONFIG_SND_OMAP_TSC2102 is not set +# CONFIG_SND_OMAP24XX_EAC is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=866 +CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +CONFIG_NLS_CODEPAGE_866=y +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1251=y +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +CONFIG_NLS_ISO8859_5=y +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_KOI8_R=y +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y From a814917058a63978ecd9fbefe4f88e3fc1576a79 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 27 Aug 2008 14:29:40 +0100 Subject: [PATCH 217/638] [ARM] OMAP: Fix 2430 SMC91x ethernet IRQ Taken from omap 97b705ad835f1481270c4b67b402d6e37fa8ad15: ARM: OMAP: Misc compile fixes after syncing with mainline Also fix 2430 smc91x to use IRQ_LOWLEVEL. Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d4d6385cad7..b72ca13b3ac 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = { [1] = { .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; From ae82cbfc8beaa69007aa09966d3983ac938c3577 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 18 Aug 2008 17:47:55 -0700 Subject: [PATCH 218/638] [ARM] use the new byteorder headers Signed-off-by: Harvey Harrison Signed-off-by: Russell King --- arch/arm/include/asm/byteorder.h | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h index 4fbfb22f65a..d04a7a2bc2e 100644 --- a/arch/arm/include/asm/byteorder.h +++ b/arch/arm/include/asm/byteorder.h @@ -18,7 +18,15 @@ #include #include -static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +#ifdef __ARMEB__ +# define __BIG_ENDIAN +#else +# define __LITTLE_ENDIAN +#endif + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __u32 t; @@ -40,19 +48,8 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) return x; } +#define __arch_swab32 __arch_swab32 -#define __arch__swab32(x) ___arch__swab32(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#ifdef __ARMEB__ -#include -#else -#include -#endif +#include #endif - From f1bcf7e3e734ea8713e08fbc3409f8bf26ec418f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 8 Aug 2008 19:34:35 +0300 Subject: [PATCH 219/638] [ARM] use bcd2bin/bin2bcd This patch changes arm to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD macros. Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- arch/arm/mach-footbridge/time.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c index fd9a7c11d62..004819ea85c 100644 --- a/arch/arm/mach-footbridge/time.c +++ b/arch/arm/mach-footbridge/time.c @@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void) } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); + sec = bcd2bin(sec); + min = bcd2bin(min); + hour = bcd2bin(hour); + day = bcd2bin(day); + mon = bcd2bin(mon); + year = bcd2bin(year); } if ((year += 1900) < 1970) year += 100; @@ -76,7 +76,7 @@ static int set_isa_cmos_time(void) cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); + cmos_minutes = bcd2bin(cmos_minutes); /* * since we're only adjusting minutes and seconds, @@ -92,8 +92,8 @@ static int set_isa_cmos_time(void) if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); + real_seconds = bin2bcd(real_seconds); + real_minutes = bin2bcd(real_minutes); } CMOS_WRITE(real_seconds,RTC_SECONDS); CMOS_WRITE(real_minutes,RTC_MINUTES); From e80d6a248298721e0ec2cac150c539d8378577d8 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 14 Aug 2008 11:10:14 +0100 Subject: [PATCH 220/638] [ARM] Skip memory holes in FLATMEM when reading /proc/pagetypeinfo Ordinarily, memory holes in flatmem still have a valid memmap and is safe to use. However, an architecture (ARM) frees up the memmap backing memory holes on the assumption it is never used. /proc/pagetypeinfo reads the whole range of pages in a zone believing that the memmap is valid and that pfn_valid will return false if it is not. On ARM, freeing the memmap breaks the page->zone linkages even though pfn_valid() returns true and the kernel can oops shortly afterwards due to accessing a bogus struct zone *. This patch lets architectures say when FLATMEM can have holes in the memmap. Rather than an expensive check for valid memory, /proc/pagetypeinfo will confirm that the page linkages are still valid by checking page->zone is still the expected zone. The lookup of page_zone is safe as there is a limited range of memory that is accessed when calling page_zone. Even if page_zone happens to return the correct zone, the impact is that the counters in /proc/pagetypeinfo are slightly off but fragmentation monitoring is unlikely to be relevant on an embedded system. Reported-by: H Hartley Sweeten Signed-off-by: Mel Gorman Tested-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/Kconfig | 5 +++++ mm/vmstat.c | 19 ++++++++++++++++++- 2 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4b8acd2851f..70dba166890 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -810,6 +810,11 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. +config ARCH_FLATMEM_HAS_HOLES + bool + default y + depends on FLATMEM + config ARCH_DISCONTIGMEM_ENABLE bool default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) diff --git a/mm/vmstat.c b/mm/vmstat.c index b0d08e667ec..d7826af2fb0 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -516,9 +516,26 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m, continue; page = pfn_to_page(pfn); +#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES + /* + * Ordinarily, memory holes in flatmem still have a valid + * memmap for the PFN range. However, an architecture for + * embedded systems (e.g. ARM) can free up the memmap backing + * holes to save memory on the assumption the memmap is + * never used. The page_zone linkages are then broken even + * though pfn_valid() returns true. Skip the page if the + * linkages are broken. Even if this test passed, the impact + * is that the counters for the movable type are off but + * fragmentation monitoring is likely meaningless on small + * systems. + */ + if (page_zone(page) != zone) + continue; +#endif mtype = get_pageblock_migratetype(page); - count[mtype]++; + if (mtype < MIGRATE_TYPES) + count[mtype]++; } /* Print counts */ From 8560c650f340565b720fd57d1f9c99ab216d99d0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Aug 2008 13:35:31 -0700 Subject: [PATCH 221/638] Revert "pktcdvd: push BKL down into driver" This reverts commit 5b6155ee70e9c4d2ad7e6f514c8eee06e2711c3a, because the block device ioctl's really aren't ready for it. In particular, the "struct file *" and the "struct inode *" arguments do not necessarily match, which means that the unlocked version of the ioctl (that only gets a "struct file *") isn't actually able to handle the cases it needs to handle. This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=11401 Reported-and-bisected-by: Laurent Riffard Acked-by: Peter Osterlund Cc: Alan Cox Cc: Andrew Morton Cc: Jens Axboe Signed-off-by: Linus Torvalds --- drivers/block/pktcdvd.c | 35 ++++++++++------------------------- 1 file changed, 10 insertions(+), 25 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 158eed4d516..29b7a648cc6 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include #include @@ -2798,14 +2797,9 @@ out_mem: return ret; } -static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { - struct inode *inode = file->f_path.dentry->d_inode; - struct pktcdvd_device *pd; - long ret; - - lock_kernel(); - pd = inode->i_bdev->bd_disk->private_data; + struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data; VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode)); @@ -2818,8 +2812,7 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case CDROM_LAST_WRITTEN: case CDROM_SEND_PACKET: case SCSI_IOCTL_SEND_COMMAND: - ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); - break; + return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); case CDROMEJECT: /* @@ -2828,15 +2821,14 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) */ if (pd->refcnt == 1) pkt_lock_door(pd, 0); - ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); - break; + return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); default: VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd); - ret = -ENOTTY; + return -ENOTTY; } - unlock_kernel(); - return ret; + + return 0; } static int pkt_media_changed(struct gendisk *disk) @@ -2858,7 +2850,7 @@ static struct block_device_operations pktcdvd_ops = { .owner = THIS_MODULE, .open = pkt_open, .release = pkt_close, - .unlocked_ioctl = pkt_ioctl, + .ioctl = pkt_ioctl, .media_changed = pkt_media_changed, }; @@ -3023,8 +3015,7 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd) mutex_unlock(&ctl_mutex); } -static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) +static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; struct pkt_ctrl_command ctrl_cmd; @@ -3041,22 +3032,16 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, case PKT_CTRL_CMD_SETUP: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - lock_kernel(); ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev); ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev); - unlock_kernel(); break; case PKT_CTRL_CMD_TEARDOWN: if (!capable(CAP_SYS_ADMIN)) return -EPERM; - lock_kernel(); ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev)); - unlock_kernel(); break; case PKT_CTRL_CMD_STATUS: - lock_kernel(); pkt_get_status(&ctrl_cmd); - unlock_kernel(); break; default: return -ENOTTY; @@ -3069,7 +3054,7 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, static const struct file_operations pkt_ctl_fops = { - .unlocked_ioctl = pkt_ctl_ioctl, + .ioctl = pkt_ctl_ioctl, .owner = THIS_MODULE, }; From f42ac38c59e0a03d6da0c24a63fb211393f484b0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 27 Aug 2008 09:14:40 -0400 Subject: [PATCH 222/638] ftrace: disable tracing for suspend to ram I've been painstakingly debugging the issue with suspend to ram and ftraced. The 2.6.28 code does not have this issue, but since the mcount recording is not going to be in 27, this must be solved for the ftrace daemon version. The resume from suspend to ram would reboot because it was triple faulting. Debugging further, I found that calling the mcount function itself was not an issue, but it would fault when it incremented preempt_count. preempt_count is on the tasks info structure that is on the low memory address of the task's stack. For some reason, it could not write to it. Resuming out of suspend to ram does quite a lot of funny tricks to get to work, so it is not surprising at all that simply doing a preempt_disable() would cause a fault. Thanks to Rafael for suggesting to add a "while (1);" to find the place in resuming that is causing the fault. I would place the loop somewhere in the code, compile and reboot and see if it would either reboot (hit the fault) or simply hang (hit the loop). Doing this over and over again, I narrowed it down that it was happening in enable_nonboot_cpus. At this point, I found that it is easier to simply disable tracing around the suspend code, instead of searching for the particular function that can not handle doing a preempt_disable. This patch disables the tracer as it suspends and reenables it on resume. I tested this patch on my Laptop, and it can resume fine with the patch. Signed-off-by: Steven Rostedt Acked-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- kernel/power/main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/power/main.c b/kernel/power/main.c index 0b7476f5d2a..540b16b6856 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "power.h" @@ -310,7 +311,7 @@ static int suspend_enter(suspend_state_t state) */ int suspend_devices_and_enter(suspend_state_t state) { - int error; + int error, ftrace_save; if (!suspend_ops) return -ENOSYS; @@ -321,6 +322,7 @@ int suspend_devices_and_enter(suspend_state_t state) goto Close; } suspend_console(); + ftrace_save = __ftrace_enabled_save(); suspend_test_start(); error = device_suspend(PMSG_SUSPEND); if (error) { @@ -352,6 +354,7 @@ int suspend_devices_and_enter(suspend_state_t state) suspend_test_start(); device_resume(PMSG_RESUME); suspend_test_finish("resume devices"); + __ftrace_enabled_restore(ftrace_save); resume_console(); Close: if (suspend_ops->end) From 16ecf85a5ca7345efbcbb2de76607db0f7ec9049 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 27 Aug 2008 01:14:46 -0700 Subject: [PATCH 223/638] e1000: fix stack size Here's the patch. It shrinks the stack from 1152 bytes to 192 bytes (the first version, that only did the e1000_option part, got it down to 600 bytes). About half comes from not using multiple "e1000_option" structures, the other half comes from turning the "e1000_opt_list[]" arrays into "static const" instead, so that gcc doesn't copy them onto the stack. Signed-off-by: Linus Torvalds Reveiewed-by: Auke Kok Tested-by: Emil Tantilov Signed-off-by: Jeff Kirsher Signed-off-by: Linus Torvalds --- drivers/net/e1000/e1000_param.c | 81 ++++++++++++++++++--------------- 1 file changed, 45 insertions(+), 36 deletions(-) diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index b9f90a5d3d4..213437d1315 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -208,7 +208,7 @@ struct e1000_option { } r; struct { /* list_option info */ int nr; - struct e1000_opt_list { int i; char *str; } *p; + const struct e1000_opt_list { int i; char *str; } *p; } l; } arg; }; @@ -242,7 +242,7 @@ static int __devinit e1000_validate_option(unsigned int *value, break; case list_option: { int i; - struct e1000_opt_list *ent; + const struct e1000_opt_list *ent; for (i = 0; i < opt->arg.l.nr; i++) { ent = &opt->arg.l.p[i]; @@ -279,7 +279,9 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter); void __devinit e1000_check_options(struct e1000_adapter *adapter) { + struct e1000_option opt; int bd = adapter->bd_number; + if (bd >= E1000_MAX_NIC) { DPRINTK(PROBE, NOTICE, "Warning: no configuration for board #%i\n", bd); @@ -287,19 +289,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } { /* Transmit Descriptor Count */ - struct e1000_option opt = { + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + int i; + e1000_mac_type mac_type = adapter->hw.mac_type; + + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Descriptors", .err = "using default of " __MODULE_STRING(E1000_DEFAULT_TXD), .def = E1000_DEFAULT_TXD, - .arg = { .r = { .min = E1000_MIN_TXD }} + .arg = { .r = { + .min = E1000_MIN_TXD, + .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD + }} }; - struct e1000_tx_ring *tx_ring = adapter->tx_ring; - int i; - e1000_mac_type mac_type = adapter->hw.mac_type; - opt.arg.r.max = mac_type < e1000_82544 ? - E1000_MAX_TXD : E1000_MAX_82544_TXD; if (num_TxDescriptors > bd) { tx_ring->count = TxDescriptors[bd]; @@ -313,19 +317,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) tx_ring[i].count = tx_ring->count; } { /* Receive Descriptor Count */ - struct e1000_option opt = { + struct e1000_rx_ring *rx_ring = adapter->rx_ring; + int i; + e1000_mac_type mac_type = adapter->hw.mac_type; + + opt = (struct e1000_option) { .type = range_option, .name = "Receive Descriptors", .err = "using default of " __MODULE_STRING(E1000_DEFAULT_RXD), .def = E1000_DEFAULT_RXD, - .arg = { .r = { .min = E1000_MIN_RXD }} + .arg = { .r = { + .min = E1000_MIN_RXD, + .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD + }} }; - struct e1000_rx_ring *rx_ring = adapter->rx_ring; - int i; - e1000_mac_type mac_type = adapter->hw.mac_type; - opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD : - E1000_MAX_82544_RXD; if (num_RxDescriptors > bd) { rx_ring->count = RxDescriptors[bd]; @@ -339,7 +345,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) rx_ring[i].count = rx_ring->count; } { /* Checksum Offload Enable/Disable */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "Checksum Offload", .err = "defaulting to Enabled", @@ -363,7 +369,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) { E1000_FC_FULL, "Flow Control Enabled" }, { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", @@ -381,7 +387,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Transmit Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_TIDV), @@ -399,7 +405,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Transmit Absolute Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Transmit Absolute Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_TADV), @@ -417,7 +423,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Receive Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Receive Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_RDTR), @@ -435,7 +441,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Receive Absolute Interrupt Delay */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Receive Absolute Interrupt Delay", .err = "using default of " __MODULE_STRING(DEFAULT_RADV), @@ -453,7 +459,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Interrupt Throttling Rate */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = range_option, .name = "Interrupt Throttling Rate (ints/sec)", .err = "using default of " __MODULE_STRING(DEFAULT_ITR), @@ -497,7 +503,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Smart Power Down */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "PHY Smart Power Down", .err = "defaulting to Disabled", @@ -513,7 +519,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter) } } { /* Kumeran Lock Loss Workaround */ - struct e1000_option opt = { + opt = (struct e1000_option) { .type = enable_option, .name = "Kumeran Lock Loss Workaround", .err = "defaulting to Enabled", @@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter) static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) { + struct e1000_option opt; unsigned int speed, dplx, an; int bd = adapter->bd_number; { /* Speed */ - struct e1000_opt_list speed_list[] = {{ 0, "" }, - { SPEED_10, "" }, - { SPEED_100, "" }, - { SPEED_1000, "" }}; + static const struct e1000_opt_list speed_list[] = { + { 0, "" }, + { SPEED_10, "" }, + { SPEED_100, "" }, + { SPEED_1000, "" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Speed", .err = "parameter ignored", @@ -604,11 +612,12 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) } } { /* Duplex */ - struct e1000_opt_list dplx_list[] = {{ 0, "" }, - { HALF_DUPLEX, "" }, - { FULL_DUPLEX, "" }}; + static const struct e1000_opt_list dplx_list[] = { + { 0, "" }, + { HALF_DUPLEX, "" }, + { FULL_DUPLEX, "" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "Duplex", .err = "parameter ignored", @@ -637,7 +646,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) "parameter ignored\n"); adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; } else { /* Autoneg */ - struct e1000_opt_list an_list[] = + static const struct e1000_opt_list an_list[] = #define AA "AutoNeg advertising " {{ 0x01, AA "10/HD" }, { 0x02, AA "10/FD" }, @@ -671,7 +680,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter) { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" }, { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }}; - struct e1000_option opt = { + opt = (struct e1000_option) { .type = list_option, .name = "AutoNeg", .err = "parameter ignored", From 87ed1d65fb536a0cd4e84874c0b038f953e448aa Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 27 Aug 2008 17:53:30 +0000 Subject: [PATCH 224/638] [CIFS] Add destroy routine for dns_resolver Otherwise, we're leaking the payload memory. CC: Stable Kernel Acked-by: David Howells Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 3 ++- fs/cifs/dns_resolve.c | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 526041a52d3..f9e4ad97a79 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -8,7 +8,8 @@ architectures. Fix problems with preserving timestamps on copying open files (e.g. "cp -a") to Windows servers. For mkdir and create honor setgid bit on parent directory when server supports Unix Extensions but not POSIX create. Update cifs.upcall version to handle new Kerberos sec flags -(this requires update of cifs.upcall program from Samba). +(this requires update of cifs.upcall program from Samba). Fix memory leak +on dns_upcall (resolving DFS referralls). Version 1.53 ------------ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index f730ef35499..a2e0673e1b0 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -47,11 +47,18 @@ static int dns_resolver_instantiate(struct key *key, const void *data, return rc; } +static void +dns_resolver_destroy(struct key *key) +{ + kfree(key->payload.data); +} + struct key_type key_type_dns_resolver = { .name = "dns_resolver", .def_datalen = sizeof(struct in_addr), .describe = user_describe, .instantiate = dns_resolver_instantiate, + .destroy = dns_resolver_destroy, .match = user_match, }; From bcc55c6664a90146149ba0fd93052adc94287b9f Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 27 Aug 2008 21:30:22 +0000 Subject: [PATCH 225/638] [CIFS] Fix plaintext authentication The last eight bytes of the password field were not cleared when doing lanman plaintext password authentication. This patch fixes that. I tested it with Samba by setting password encryption to no in the server's smb.conf. Other servers also can be configured to force plaintext authentication. Note that plaintexti authentication requires setting /proc/fs/cifs/SecurityFlags to 0x30030 on the client (enabling both LANMAN and also plaintext password support). Also note that LANMAN support (and thus plaintext password support) requires CONFIG_CIFS_WEAK_PW_HASH to be enabled in menuconfig. CC: Jeff Layton CC: Stable Kernel Signed-off-by: Steve French --- fs/cifs/cifsencrypt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 83fd40dc1ef..bd5f13d3845 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -294,6 +294,7 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key) if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0) if (extended_security & CIFSSEC_MAY_PLNTXT) { + memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE); memcpy(lnm_session_key, password_with_pad, CIFS_ENCPWD_SIZE); return; From f753f3272b4d2108d1e4b121ddcde504737a8693 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 26 Aug 2008 19:52:47 +0100 Subject: [PATCH 226/638] tty: TIOCGSOFTCAR/SSOFTCAR on pty is wron The termios settings ioctls on a pty should affect the bound tty side not the pty. The SOFTCAR ioctls use the wrong device file. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ioctl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index ea9fc5d03b9..bf34e459742 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -937,12 +937,14 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file, return 0; #endif case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, + /* FIXME: for correctness we may need to take the termios + lock here - review */ + return put_user(C_CLOCAL(real_tty) ? 1 : 0, (int __user *)arg); case TIOCSSOFTCAR: if (get_user(arg, (unsigned int __user *) arg)) return -EFAULT; - return tty_change_softcar(tty, arg); + return tty_change_softcar(real_tty, arg); default: return -ENOIOCTLCMD; } From a152db71d962f405f7e9be5c818bddf6d1be50a7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 26 Aug 2008 19:55:58 +0100 Subject: [PATCH 227/638] tty: Fix termios tty window resize race with pty/tty pair Kanru Chen posted a patch versus the old code which deals with the case where you resize the pty side of a pty/tty pair. In that situation the termios data is updated for both pty and tty but the locks are not held for the right side. This implements the fix differently against the updated tty code. Patch by self but the hard bit (noticing and fixing the bug) is thanks to Kanru Chen. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_io.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index a27160ba21d..daeb8f76697 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2498,7 +2498,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) /** * tty_do_resize - resize event * @tty: tty being resized - * @real_tty: real tty (if using a pty/tty pair) + * @real_tty: real tty (not the same as tty if using a pty/tty pair) * @rows: rows (character) * @cols: cols (character) * @@ -2512,7 +2512,8 @@ int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, struct pid *pgrp, *rpgrp; unsigned long flags; - mutex_lock(&tty->termios_mutex); + /* For a PTY we need to lock the tty side */ + mutex_lock(&real_tty->termios_mutex); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can @@ -2533,7 +2534,7 @@ int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, tty->winsize = *ws; real_tty->winsize = *ws; done: - mutex_unlock(&tty->termios_mutex); + mutex_unlock(&real_tty->termios_mutex); return 0; } From 4c246edd2550304df5b766cc841584b2bb058843 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Wed, 27 Aug 2008 14:29:57 -0700 Subject: [PATCH 228/638] IB/mlx4: Actually return L_Key and R_Key for fast register MRs Initialize the L_Key and R_Key for memory regions returned from mlx4_ib_alloc_fast_reg_mr(). Otherwise callers just get garbage for the memory keys and can't do anything useful with these MRs. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- drivers/infiniband/hw/mlx4/mr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index a4cdb465cd1..87f5c5a87b9 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -204,6 +204,8 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, if (err) goto err_mr; + mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + return &mr->ibmr; err_mr: From 328fc47ea0bcc27d9afa69c3ad6e52431cadd76c Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Aug 2008 16:08:54 -0700 Subject: [PATCH 229/638] sctp: correct bounds check in sctp_setsockopt_auth_key The bonds check to prevent buffer overlflow was not exactly right. It still allowed overflow of up to 8 bytes which is sizeof(struct sctp_authkey). Since optlen is already checked against the size of that struct, we are guaranteed not to cause interger overflow either. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index afa952e726d..9b9b2c31dd1 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3144,7 +3144,7 @@ static int sctp_setsockopt_auth_key(struct sock *sk, goto out; } - if (authkey->sca_keylength > optlen) { + if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) { ret = -EINVAL; goto out; } From d97240552cd98c4b07322f30f66fd9c3ba4171de Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Aug 2008 16:09:49 -0700 Subject: [PATCH 230/638] sctp: fix random memory dereference with SCTP_HMAC_IDENT option. The number of identifiers needs to be checked against the option length. Also, the identifier index provided needs to be verified to make sure that it doesn't exceed the bounds of the array. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/auth.c | 3 +++ net/sctp/socket.c | 6 ++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 1fcb4cf2f4c..52db5f60daa 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -786,6 +786,9 @@ int sctp_auth_ep_set_hmacs(struct sctp_endpoint *ep, for (i = 0; i < hmacs->shmac_num_idents; i++) { id = hmacs->shmac_idents[i]; + if (id > SCTP_AUTH_HMAC_ID_MAX) + return -EOPNOTSUPP; + if (SCTP_AUTH_HMAC_ID_SHA1 == id) has_sha1 = 1; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9b9b2c31dd1..5ffb9dec1c3 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -3086,6 +3086,7 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk, int optlen) { struct sctp_hmacalgo *hmacs; + u32 idents; int err; if (!sctp_auth_enable) @@ -3103,8 +3104,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk, goto out; } - if (hmacs->shmac_num_idents == 0 || - hmacs->shmac_num_idents > SCTP_AUTH_NUM_HMACS) { + idents = hmacs->shmac_num_idents; + if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS || + (idents * sizeof(u16)) > (optlen - sizeof(struct sctp_hmacalgo))) { err = -EINVAL; goto out; } From 34894c7843e00972d88b3592027703d4e05a06a7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:15:43 +0900 Subject: [PATCH 231/638] sh: crash kernel resource fix The reserved crash kernel memory range is currently missing from /proc/iomem. crashk_res is mistakenly setup after __add_active_range(). Reorder things to make sure the resource shows up in /proc/iomem. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/setup.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index a35207655e7..de832056bf1 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void) (unsigned long)(free_mem >> 20)); crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); } } #else @@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn, request_resource(res, &data_resource); request_resource(res, &bss_resource); -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - request_resource(res, &crashk_res); -#endif - add_active_range(nid, start_pfn, end_pfn); } From 5734493bac88b28d8d7e2f262305fd6e83545ac5 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:19:01 +0900 Subject: [PATCH 232/638] sh: fix kexec entry point for crash kernels The crash kernel entry point is currently checked by the kexec kernel code and only physical addresses in the reserved memory window are accepted. This means that we can't pass P2 or P1 addresses as entry points in the case of crash kernels. This patch makes sure we can start crash kernels by adding support for physical address entry points. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/machine_kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 4703dff174d..94df56b0d1f 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image) /* now call it */ rnk = (relocate_new_kernel_t) reboot_code_buffer; - (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); + (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg); } void arch_crash_save_vmcoreinfo(void) From c773d8af8ebccb723e9843c1e73840b2c5e00572 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:21:29 +0900 Subject: [PATCH 233/638] sh: fix platform_resource_setup_memory() section mismatch This patch kills a section mismatch for platform_resource_setup_memory(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 895bb3f335c..64b8f7f96f9 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str) } __setup("memchunk.", memchunk_setup); -static void memchunk_cmdline_override(char *name, unsigned long *sizep) +static void __init memchunk_cmdline_override(char *name, unsigned long *sizep) { char *p = boot_command_line; int k = strlen(name); @@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep) } } -int platform_resource_setup_memory(struct platform_device *pdev, - char *name, unsigned long memsize) +int __init platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) { struct resource *r; dma_addr_t dma_handle; From be8c129f1a853daac9085d81256c9d4bd38c6a11 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:22:49 +0900 Subject: [PATCH 234/638] sh: update Migo-R defconfig This patch updates the MigoR defconfig to include the recently merged uio_pdrv_genirq driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/configs/migor_defconfig | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index c4b3e1d8950..4f8b1974f2c 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:44:41 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 14:18:17 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -270,6 +271,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support @@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set # # File systems From f9bed3f2040b2ed44f0d1b7f0280458533c5d2a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:23:52 +0900 Subject: [PATCH 235/638] sh: update AP325RXA defconfig This patch updates the AP325RXA defconfig to include the recently merged uio_pdrv_genirq driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/configs/ap325rxa_defconfig | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 29926a9b9ce..851c870adf3 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:18:59 2008 +# Linux kernel version: 2.6.27-rc4 +# Tue Aug 26 14:21:17 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -58,7 +58,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -261,9 +261,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set +CONFIG_UIO=y +# CONFIG_UIO_PDRV is not set +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_UIO_SMX is not set # # File systems @@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set From 3c31bf73134038a417a9ae3fa3c02c279b42c550 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 27 Aug 2008 20:16:46 +0900 Subject: [PATCH 236/638] sh: fix semtimedop syscall fix the problem that cannot work semtimedop system call. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/sys_sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 59cd2859ce9..9061b86d73f 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, version = call >> 16; /* hack for backward compatibility */ call &= 0xffff; - if (call <= SEMCTL) + if (call <= SEMTIMEDOP) switch (call) { case SEMOP: return sys_semtimedop(first, From ee35425c8eb11556a4cb7b1c7543f1bfb88f911c Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 28 Aug 2008 08:33:22 +0200 Subject: [PATCH 237/638] i2c: Fix device_init_wakeup place device_init_wakeup must be called after device_register. Signed-off-by: Marc Pignat Acked-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 550853f79ae..4ac33670797 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev) if (!driver->probe || !driver->id_table) return -ENODEV; client->driver = driver; + if (!device_can_wakeup(&client->dev)) + device_init_wakeup(&client->dev, + client->flags & I2C_CLIENT_WAKE); dev_dbg(dev, "probe\n"); status = driver->probe(client, i2c_match_id(driver->id_table, client)); @@ -262,9 +265,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->adapter = adap; client->dev.platform_data = info->platform_data; - device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE); - client->flags = info->flags & ~I2C_CLIENT_WAKE; + client->flags = info->flags; client->addr = info->addr; client->irq = info->irq; From 96e21e4fbc1b83a3445553381ec74f904618562e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 28 Aug 2008 08:33:23 +0200 Subject: [PATCH 238/638] i2c: Add missing kerneldoc descriptions Add missing kernel descriptions of struct i2c_driver members. Signed-off-by: Jean Delvare Acked-by: Randy Dunlap Cc: David Brownell --- include/linux/i2c.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 08be0d21864..06115128047 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -97,7 +97,19 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, /** * struct i2c_driver - represent an I2C device driver + * @id: Unique driver ID (optional) * @class: What kind of i2c device we instantiate (for detect) + * @attach_adapter: Callback for bus addition (for legacy drivers) + * @detach_adapter: Callback for bus removal (for legacy drivers) + * @detach_client: Callback for device removal (for legacy drivers) + * @probe: Callback for device binding (new-style drivers) + * @remove: Callback for device unbinding (new-style drivers) + * @shutdown: Callback for device shutdown + * @suspend: Callback for device suspend + * @resume: Callback for device resume + * @command: Callback for bus-wide signaling (optional) + * @driver: Device driver model driver + * @id_table: List of I2C devices supported by this driver * @detect: Callback for device detection * @address_data: The I2C addresses to probe, ignore or force (for detect) * @clients: List of detected clients we created (for i2c-core use only) From 4329cf8613b0c7cdc020005f0e1ea7378681f1d8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 28 Aug 2008 08:33:23 +0200 Subject: [PATCH 239/638] i2c: Prevent log spam on some DVB adapters Some DVB adapters do not support the special I2C transaction that we use for probing purposes. There's no point in logging this event, as there's nothing the user can do and in general there is no actual problem. So, degrade one of these messages to a debug message, and move the other one around so that it is only printed on bogus drivers. Signed-off-by: Jean Delvare Acked-by: Uwe Bugla --- drivers/i2c/i2c-core.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 4ac33670797..b346a687ab5 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1190,8 +1190,8 @@ int i2c_probe(struct i2c_adapter *adapter, && address_data->normal_i2c[0] == I2C_CLIENT_END) return 0; - dev_warn(&adapter->dev, "SMBus Quick command not supported, " - "can't probe for chips\n"); + dev_dbg(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); return -EOPNOTSUPP; } @@ -1352,6 +1352,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) } } + /* Stop here if the classes do not match */ + if (!(adapter->class & driver->class)) + goto exit_free; + /* Stop here if we can't use SMBUS_QUICK */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { if (address_data->probe[0] == I2C_CLIENT_END @@ -1364,10 +1368,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) goto exit_free; } - /* Stop here if the classes do not match */ - if (!(adapter->class & driver->class)) - goto exit_free; - /* Probe entries are done second, and are not affected by ignore entries either */ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { From f3ade837808121ff8bab9c56725f4fe40ec85a56 Mon Sep 17 00:00:00 2001 From: John Blackwood Date: Tue, 26 Aug 2008 15:09:43 -0400 Subject: [PATCH 240/638] sched: fix sched_rt_rq_enqueue() resched idle When sysctl_sched_rt_runtime is set to something other than -1 and the CONFIG_RT_GROUP_SCHED kernel parameter is NOT enabled, we get into a state where we see one or more CPUs idling forvever even though there are real-time tasks in their rt runqueue that are able to run (no longer throttled). The sequence is: - A real-time task is running when the timer sets the rt runqueue to throttled, and the rt task is resched_task()ed and switched out, and idle is switched in since there are no non-rt tasks to run on that cpu. - Eventually the do_sched_rt_period_timer() runs and un-throttles the rt runqueue, but we just exit the timer interrupt and go back to executing the idle task in the idle loop forever. If we change the sched_rt_rq_enqueue() routine to use some of the code from the CONFIG_RT_GROUP_SCHED enabled version of this same routine and resched_task() the currently executing task (idle in our case) if it is a lower priority task than the higher rt task in the now un-throttled runqueue, the problem is no longer observed. Signed-off-by: John Blackwood Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 998ba54b454..07d9b330790 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -199,6 +199,8 @@ static inline struct rt_rq *group_rt_rq(struct sched_rt_entity *rt_se) static inline void sched_rt_rq_enqueue(struct rt_rq *rt_rq) { + if (rt_rq->rt_nr_running) + resched_task(rq_of_rt_rq(rt_rq)->curr); } static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq) From 226a6ec31117113a3b775b6b8d63dc4487c2d333 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 28 Aug 2008 17:28:46 +0800 Subject: [PATCH 241/638] Blackfin arch: sram: use 'unsigned long' for irqflags Using just 'unsigned' will make flags an unsigned int. While this is arguably not an error on blackfin where sizeof(int) == sizeof(long), the patch is still justified on the grounds of principle. The patch was generated using the Coccinelle semantic patch framework. Cc: Julia Lawall Cc: Alexey Dobriyan Signed-off-by: Vegard Nossum Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mm/blackfin_sram.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 1ed1b15a391..4f5e887a0d9 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -379,7 +379,7 @@ EXPORT_SYMBOL(sram_free); void *l1_data_A_sram_alloc(size_t size) { - unsigned flags; + unsigned long flags; void *addr = NULL; /* add mutex operation */ @@ -402,7 +402,7 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc); int l1_data_A_sram_free(const void *addr) { - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -425,7 +425,7 @@ EXPORT_SYMBOL(l1_data_A_sram_free); void *l1_data_B_sram_alloc(size_t size) { #if L1_DATA_B_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -450,7 +450,7 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc); int l1_data_B_sram_free(const void *addr) { #if L1_DATA_B_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -504,7 +504,7 @@ EXPORT_SYMBOL(l1_data_sram_free); void *l1_inst_sram_alloc(size_t size) { #if L1_CODE_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -529,7 +529,7 @@ EXPORT_SYMBOL(l1_inst_sram_alloc); int l1_inst_sram_free(const void *addr) { #if L1_CODE_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -551,7 +551,7 @@ EXPORT_SYMBOL(l1_inst_sram_free); /* L1 Scratchpad memory allocate function */ void *l1sram_alloc(size_t size) { - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -569,7 +569,7 @@ void *l1sram_alloc(size_t size) /* L1 Scratchpad memory allocate function */ void *l1sram_alloc_max(size_t *psize) { - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -587,7 +587,7 @@ void *l1sram_alloc_max(size_t *psize) /* L1 Scratchpad memory free function */ int l1sram_free(const void *addr) { - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ @@ -605,7 +605,7 @@ int l1sram_free(const void *addr) void *l2_sram_alloc(size_t size) { #if L2_LENGTH != 0 - unsigned flags; + unsigned long flags; void *addr; /* add mutex operation */ @@ -641,7 +641,7 @@ EXPORT_SYMBOL(l2_sram_zalloc); int l2_sram_free(const void *addr) { #if L2_LENGTH != 0 - unsigned flags; + unsigned long flags; int ret; /* add mutex operation */ From d310fb4bb73629840430cb13cb282915e49fef4b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 28 Aug 2008 17:32:01 +0800 Subject: [PATCH 242/638] Blackfin arch: Fix PM building on BF52x: No ROTWE on BF52x, add USBWE Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- .../mach-bf527/include/mach/defBF52x_base.h | 185 +++++++++--------- arch/blackfin/mach-common/ints-priority.c | 2 +- 2 files changed, 89 insertions(+), 98 deletions(-) diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h index fc69cf93f14..6ac2ed7026e 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h @@ -151,7 +151,7 @@ #define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ #define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ #define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ -#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ #define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ #define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ @@ -634,18 +634,9 @@ /* PLL_DIV Macros */ #define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +/* VR_CTL Masks */ +#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */ #define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ #define VLEV 0x00F0 /* Internal Voltage Level */ #define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ @@ -660,7 +651,7 @@ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */ #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ #define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ #define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ @@ -697,16 +688,16 @@ #define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ #define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ -#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ -#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ -#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ #define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ #define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ #define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ #define IRQ_TWI 0x00000200 /* TWI Interrupt */ #define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ -#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ #define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ #define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ #define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ @@ -801,7 +792,7 @@ #define WDEV_NONE 0x0006 /* no event on roll over */ #define WDEN 0x0FF0 /* enable watchdog */ #define WDDIS 0x0AD0 /* disable watchdog */ -#define WDRO 0x8000 /* watchdog rolled over latch */ +#define WDRO 0x8000 /* watchdog rolled over latch */ /* depreciated WDOG_CTL Register Masks for legacy code */ @@ -882,7 +873,7 @@ #define NINT 0x01 /* Pending Interrupt */ #define IIR_TX_READY 0x02 /* UART_THR empty */ #define IIR_RX_READY 0x04 /* Receive data ready */ -#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ #define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ /* UARTx_GCTL Masks */ @@ -1638,12 +1629,12 @@ /* entry addresses of the user-callable Boot ROM functions */ -#define _BOOTROM_RESET 0xEF000000 -#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006 -#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 -#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A -#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 @@ -1771,71 +1762,71 @@ /* Bit masks for CNT_CONFIG */ #define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 +#define nCNTE 0x0 #define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 +#define nDEBE 0x0 #define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 +#define nCDGINV 0x0 #define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 +#define nCUDINV 0x0 #define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 +#define nCZMINV 0x0 #define CNTMODE 0x700 /* Counter Operating Mode */ #define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 +#define nZMZC 0x0 #define BNDMODE 0x3000 /* Boundary register Mode */ #define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 +#define nINPDIS 0x0 /* Bit masks for CNT_IMASK */ #define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 +#define nICIE 0x0 #define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 +#define nUCIE 0x0 #define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 +#define nDCIE 0x0 #define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 +#define nMINCIE 0x0 #define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 +#define nMAXCIE 0x0 #define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 +#define nCOV31IE 0x0 #define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 +#define nCOV15IE 0x0 #define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 +#define nCZEROIE 0x0 #define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 +#define nCZMIE 0x0 #define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 +#define nCZMEIE 0x0 #define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 +#define nCZMZIE 0x0 /* Bit masks for CNT_STATUS */ #define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 +#define nICII 0x0 #define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 +#define nUCII 0x0 #define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 +#define nDCII 0x0 #define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 +#define nMINCII 0x0 #define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 +#define nMAXCII 0x0 #define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 +#define nCOV31II 0x0 #define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 +#define nCOV15II 0x0 #define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 +#define nCZEROII 0x0 #define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 +#define nCZMII 0x0 #define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 +#define nCZMEII 0x0 #define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 +#define nCZMZII 0x0 /* Bit masks for CNT_COMMAND */ @@ -1843,7 +1834,7 @@ #define W1LMIN 0xf0 /* Load Min Register */ #define W1LMAX 0xf00 /* Load Max Register */ #define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 +#define nW1ZMONCE 0x0 /* Bit masks for CNT_DEBOUNCE */ @@ -1853,15 +1844,15 @@ #define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ #define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ -#define nFIEN 0x0 +#define nFIEN 0x0 #define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ -#define nFTESTDEC 0x0 +#define nFTESTDEC 0x0 #define FWRTEST 0x2000 /* OTP/Fuse Write Test */ -#define nFWRTEST 0x0 +#define nFWRTEST 0x0 #define FRDEN 0x4000 /* OTP/Fuse Read Enable */ -#define nFRDEN 0x0 +#define nFRDEN 0x0 #define FWREN 0x8000 /* OTP/Fuse Write Enable */ -#define nFWREN 0x0 +#define nFWREN 0x0 /* Bit masks for OTP_BEN */ @@ -1870,15 +1861,15 @@ /* Bit masks for OTP_STATUS */ #define FCOMP 0x1 /* OTP/Fuse Access Complete */ -#define nFCOMP 0x0 +#define nFCOMP 0x0 #define FERROR 0x2 /* OTP/Fuse Access Error */ -#define nFERROR 0x0 +#define nFERROR 0x0 #define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ -#define nMMRGLOAD 0x0 +#define nMMRGLOAD 0x0 #define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ -#define nMMRGLOCK 0x0 +#define nMMRGLOCK 0x0 #define FPGMEN 0x40 /* OTP/Fuse Program Enable */ -#define nFPGMEN 0x0 +#define nFPGMEN 0x0 /* Bit masks for OTP_TIMING */ @@ -1892,42 +1883,42 @@ /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ -#define nEMUDABL 0x0 +#define nEMUDABL 0x0 #define RSTDABL 0x2 /* Reset Disable */ -#define nRSTDABL 0x0 +#define nRSTDABL 0x0 #define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ #define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ #define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ #define DMA0OVR 0x800 /* DMA0 Memory Access Override */ -#define nDMA0OVR 0x0 +#define nDMA0OVR 0x0 #define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ -#define nDMA1OVR 0x0 +#define nDMA1OVR 0x0 #define EMUOVR 0x4000 /* Emulation Override */ -#define nEMUOVR 0x0 +#define nEMUOVR 0x0 #define OTPSEN 0x8000 /* OTP Secrets Enable. */ -#define nOTPSEN 0x0 +#define nOTPSEN 0x0 #define L2DABL 0x70000 /* L2 Memory Disable. */ /* Bit masks for SECURE_CONTROL */ #define SECURE0 0x1 /* SECURE 0 */ -#define nSECURE0 0x0 +#define nSECURE0 0x0 #define SECURE1 0x2 /* SECURE 1 */ -#define nSECURE1 0x0 +#define nSECURE1 0x0 #define SECURE2 0x4 /* SECURE 2 */ -#define nSECURE2 0x0 +#define nSECURE2 0x0 #define SECURE3 0x8 /* SECURE 3 */ -#define nSECURE3 0x0 +#define nSECURE3 0x0 /* Bit masks for SECURE_STATUS */ #define SECMODE 0x3 /* Secured Mode Control State */ #define NMI 0x4 /* Non Maskable Interrupt */ -#define nNMI 0x0 +#define nNMI 0x0 #define AFVALID 0x8 /* Authentication Firmware Valid */ -#define nAFVALID 0x0 +#define nAFVALID 0x0 #define AFEXIT 0x10 /* Authentication Firmware Exit */ -#define nAFEXIT 0x0 +#define nAFEXIT 0x0 #define SECSTAT 0xe0 /* Secure Status */ /* Bit masks for NFC_CTL */ @@ -1935,60 +1926,60 @@ #define WR_DLY 0xf /* Write Strobe Delay */ #define RD_DLY 0xf0 /* Read Strobe Delay */ #define NWIDTH 0x100 /* NAND Data Width */ -#define nNWIDTH 0x0 +#define nNWIDTH 0x0 #define PG_SIZE 0x200 /* Page Size */ -#define nPG_SIZE 0x0 +#define nPG_SIZE 0x0 /* Bit masks for NFC_STAT */ #define NBUSY 0x1 /* Not Busy */ -#define nNBUSY 0x0 +#define nNBUSY 0x0 #define WB_FULL 0x2 /* Write Buffer Full */ -#define nWB_FULL 0x0 +#define nWB_FULL 0x0 #define PG_WR_STAT 0x4 /* Page Write Pending */ -#define nPG_WR_STAT 0x0 +#define nPG_WR_STAT 0x0 #define PG_RD_STAT 0x8 /* Page Read Pending */ -#define nPG_RD_STAT 0x0 +#define nPG_RD_STAT 0x0 #define WB_EMPTY 0x10 /* Write Buffer Empty */ -#define nWB_EMPTY 0x0 +#define nWB_EMPTY 0x0 /* Bit masks for NFC_IRQSTAT */ #define NBUSYIRQ 0x1 /* Not Busy IRQ */ -#define nNBUSYIRQ 0x0 +#define nNBUSYIRQ 0x0 #define WB_OVF 0x2 /* Write Buffer Overflow */ -#define nWB_OVF 0x0 +#define nWB_OVF 0x0 #define WB_EDGE 0x4 /* Write Buffer Edge Detect */ -#define nWB_EDGE 0x0 +#define nWB_EDGE 0x0 #define RD_RDY 0x8 /* Read Data Ready */ -#define nRD_RDY 0x0 +#define nRD_RDY 0x0 #define WR_DONE 0x10 /* Page Write Done */ -#define nWR_DONE 0x0 +#define nWR_DONE 0x0 /* Bit masks for NFC_IRQMASK */ #define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ -#define nMASK_BUSYIRQ 0x0 +#define nMASK_BUSYIRQ 0x0 #define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ -#define nMASK_WBOVF 0x0 +#define nMASK_WBOVF 0x0 #define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ -#define nMASK_WBEMPTY 0x0 +#define nMASK_WBEMPTY 0x0 #define MASK_RDRDY 0x8 /* Mask Read Data Ready */ -#define nMASK_RDRDY 0x0 +#define nMASK_RDRDY 0x0 #define MASK_WRDONE 0x10 /* Mask Write Done */ -#define nMASK_WRDONE 0x0 +#define nMASK_WRDONE 0x0 /* Bit masks for NFC_RST */ #define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ -#define nECC_RST 0x0 +#define nECC_RST 0x0 /* Bit masks for NFC_PGCTL */ #define PG_RD_START 0x1 /* Page Read Start */ -#define nPG_RD_START 0x0 +#define nPG_RD_START 0x0 #define PG_WR_START 0x2 /* Page Write Start */ -#define nPG_WR_START 0x0 +#define nPG_WR_START 0x0 /* Bit masks for NFC_ECC0 */ diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 6dac86995d1..5fa536727c6 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -216,7 +216,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) wakeup |= KPADWE; break; #endif -#ifdef IRQ_CNT +#ifdef CONFIG_BF54x case IRQ_CNT: wakeup |= ROTWE; break; From cc2991cf15ae92fa30b3ea9f56a8a5a337bd33c7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Aug 2008 12:33:03 +0200 Subject: [PATCH 243/638] sched: rt-bandwidth accounting fix It fixes an accounting bug where we would continue accumulating runtime even though the bandwidth control is disabled. This would lead to very long throttle periods once bandwidth control gets turned on again. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 07d9b330790..552310798da 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -440,9 +440,6 @@ static int sched_rt_runtime_exceeded(struct rt_rq *rt_rq) { u64 runtime = sched_rt_runtime(rt_rq); - if (runtime == RUNTIME_INF) - return 0; - if (rt_rq->rt_throttled) return rt_rq_throttled(rt_rq); @@ -493,9 +490,11 @@ static void update_curr_rt(struct rq *rq) rt_rq = rt_rq_of_se(rt_se); spin_lock(&rt_rq->rt_runtime_lock); - rt_rq->rt_time += delta_exec; - if (sched_rt_runtime_exceeded(rt_rq)) - resched_task(curr); + if (sched_rt_runtime(rt_rq) != RUNTIME_INF) { + rt_rq->rt_time += delta_exec; + if (sched_rt_runtime_exceeded(rt_rq)) + resched_task(curr); + } spin_unlock(&rt_rq->rt_runtime_lock); } } From 838726c4756813576078203eb7e1e219db0da870 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 28 Aug 2008 07:54:59 -0400 Subject: [PATCH 244/638] cifs: fix O_APPEND on directio mounts The direct I/O write codepath for CIFS is done through cifs_user_write(). That function does not currently call generic_write_checks() so the file position isn't being properly set when the file is opened with O_APPEND. It's also not doing the other "normal" checks that should be done for a write call. The problem is currently that when you open a file with O_APPEND on a mount with the directio mount option, the file position is set to the beginning of the file. This makes any subsequent writes clobber the data in the file starting at the beginning. This seems to fix the problem in cursory testing. It is, however important to note that NFS disallows the combination of (O_DIRECT|O_APPEND). If my understanding is correct, the concern is races with multiple clients appending to a file clobbering each others' data. Since the write model for CIFS and NFS is pretty similar in this regard, CIFS is probably subject to the same sort of races. What's unclear to me is why this is a particular problem with O_DIRECT and not with buffered writes... Regardless, disallowing O_APPEND on an entire mount is probably not reasonable, so we'll probably just have to deal with it and reevaluate this flag combination when we get proper support for O_DIRECT. In the meantime this patch at least fixes the existing problem. Signed-off-by: Jeff Layton Cc: Stable Tree Signed-off-by: Steve French --- fs/cifs/file.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index ff14d14903a..cbefe1f1f9f 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -833,6 +833,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data, return -EBADF; open_file = (struct cifsFileInfo *) file->private_data; + rc = generic_write_checks(file, poffset, &write_size, 0); + if (rc) + return rc; + xid = GetXid(); if (*poffset > file->f_path.dentry->d_inode->i_size) From 2e655021b8d50b5d90ce442f3de6bf3667729910 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 28 Aug 2008 15:30:06 +0000 Subject: [PATCH 245/638] [CIFS] update cifs change log Signed-off-by: Steve French --- fs/cifs/CHANGES | 5 ++++- fs/cifs/README | 14 ++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index f9e4ad97a79..06e521a945c 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -9,7 +9,10 @@ files (e.g. "cp -a") to Windows servers. For mkdir and create honor setgid bit on parent directory when server supports Unix Extensions but not POSIX create. Update cifs.upcall version to handle new Kerberos sec flags (this requires update of cifs.upcall program from Samba). Fix memory leak -on dns_upcall (resolving DFS referralls). +on dns_upcall (resolving DFS referralls). Fix plain text password +authentication (requires setting SecurityFlags to 0x30030 to enable +lanman and plain text though). Fix writes to be at correct offset when +file is open with O_APPEND and file is on a directio (forcediretio) mount. Version 1.53 ------------ diff --git a/fs/cifs/README b/fs/cifs/README index 68b5c1169d9..bd2343d4c6a 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -542,10 +542,20 @@ SecurityFlags Flags which control security negotiation and hashing mechanisms (as "must use") on the other hand does not make much sense. Default flags are 0x07007 - (NTLM, NTLMv2 and packet signing allowed). Maximum + (NTLM, NTLMv2 and packet signing allowed). The maximum allowable flags if you want to allow mounts to servers using weaker password hashes is 0x37037 (lanman, - plaintext, ntlm, ntlmv2, signing allowed): + plaintext, ntlm, ntlmv2, signing allowed). Some + SecurityFlags require the corresponding menuconfig + options to be enabled (lanman and plaintext require + CONFIG_CIFS_WEAK_PW_HASH for example). Enabling + plaintext authentication currently requires also + enabling lanman authentication in the security flags + because the cifs module only supports sending + laintext passwords using the older lanman dialect + form of the session setup SMB. (e.g. for authentication + using plain text passwords, set the SecurityFlags + to 0x30030): may use packet signing 0x00001 must use packet signing 0x01001 From c76da9da1fffa6de263486df54950eb328d58f71 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 28 Aug 2008 15:32:22 +0000 Subject: [PATCH 246/638] [CIFS] Turn off Unicode during session establishment for plaintext authentication LANMAN session setup did not support Unicode (after session setup, unicode can still be used though). Fixes samba bug# 5319 CC: Jeff Layton CC: Stable Kernel Signed-off-by: Steve French --- fs/cifs/sess.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index b537fad3bf5..252fdc0567f 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -409,6 +409,8 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, #ifdef CONFIG_CIFS_WEAK_PW_HASH char lnm_session_key[CIFS_SESS_KEY_SIZE]; + pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE; + /* no capabilities flags in old lanman negotiation */ pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE); From 212496fd9a5f5db0a037a2a8c6fde2d2bd93c1d7 Mon Sep 17 00:00:00 2001 From: Jean-Christophe DUBOIS Date: Thu, 28 Aug 2008 00:00:23 +0100 Subject: [PATCH 247/638] [ARM] 5226/1: remove unmatched comment end. remove unmatched comment end. Signed-off-by: Jean-Christophe DUBOIS Signed-off-by: Russell King --- arch/arm/lib/sha1.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S index ff6ece487ff..67c2bf4774b 100644 --- a/arch/arm/lib/sha1.S +++ b/arch/arm/lib/sha1.S @@ -29,7 +29,7 @@ ENTRY(sha_transform) stmfd sp!, {r4 - r8, lr} @ for (i = 0; i < 16; i++) - @ W[i] = be32_to_cpu(in[i]); */ + @ W[i] = be32_to_cpu(in[i]); #ifdef __ARMEB__ mov r4, r0 From 9662e0802445a1f56cef11bbd0d520b07238424a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 27 Aug 2008 21:04:49 -0700 Subject: [PATCH 248/638] ACPI: thinkpad-acpi: wan radio control is not experimental The WWAN radio control has been working well for over three years, and is no longer experimental. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andi Kleen --- Documentation/laptops/thinkpad-acpi.txt | 11 +++-------- drivers/misc/thinkpad_acpi.c | 1 - 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 02dc748b76c..71f0fe1fc1b 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -44,7 +44,7 @@ detailed description): - LCD brightness control - Volume control - Fan control and monitoring: fan speed, fan enable/disable - - Experimental: WAN enable and disable + - WAN enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255 would be the safest choice, though). -EXPERIMENTAL: WAN ------------------ +WAN +--- procfs: /proc/acpi/ibm/wan sysfs device attribute: wwan_enable (deprecated) sysfs rfkill class: switch "tpacpi_wwan_sw" -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. - This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index d3eb7903c34..6b9300779a4 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3086,7 +3086,6 @@ static struct ibm_struct wan_driver_data = { .read = wan_read, .write = wan_write, .exit = wan_exit, - .flags.experimental = 1, }; /************************************************************************* From 41108eb10142e0552f2de1e4c0675b108c5f018f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 28 Aug 2008 14:39:12 +0200 Subject: [PATCH 249/638] ftrace: disable tracing for hibernation In accordance with commit f42ac38c59e0a03d6da0c24a63fb211393f484b0 ("ftrace: disable tracing for suspend to ram"), disable tracing around the suspend code in hibernation code paths. Signed-off-by: Rafael J. Wysocki Acked-by: Steven Rostedt Signed-off-by: Linus Torvalds --- kernel/power/disk.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/kernel/power/disk.c b/kernel/power/disk.c index f011e0870b5..bbd85c60f74 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "power.h" @@ -255,7 +256,7 @@ static int create_image(int platform_mode) int hibernation_snapshot(int platform_mode) { - int error; + int error, ftrace_save; /* Free memory before shutting down devices. */ error = swsusp_shrink_memory(); @@ -267,6 +268,7 @@ int hibernation_snapshot(int platform_mode) goto Close; suspend_console(); + ftrace_save = __ftrace_enabled_save(); error = device_suspend(PMSG_FREEZE); if (error) goto Recover_platform; @@ -296,6 +298,7 @@ int hibernation_snapshot(int platform_mode) Resume_devices: device_resume(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); + __ftrace_enabled_restore(ftrace_save); resume_console(); Close: platform_end(platform_mode); @@ -366,10 +369,11 @@ static int resume_target_kernel(void) int hibernation_restore(int platform_mode) { - int error; + int error, ftrace_save; pm_prepare_console(); suspend_console(); + ftrace_save = __ftrace_enabled_save(); error = device_suspend(PMSG_QUIESCE); if (error) goto Finish; @@ -384,6 +388,7 @@ int hibernation_restore(int platform_mode) platform_restore_cleanup(platform_mode); device_resume(PMSG_RECOVER); Finish: + __ftrace_enabled_restore(ftrace_save); resume_console(); pm_restore_console(); return error; @@ -396,7 +401,7 @@ int hibernation_restore(int platform_mode) int hibernation_platform_enter(void) { - int error; + int error, ftrace_save; if (!hibernation_ops) return -ENOSYS; @@ -411,6 +416,7 @@ int hibernation_platform_enter(void) goto Close; suspend_console(); + ftrace_save = __ftrace_enabled_save(); error = device_suspend(PMSG_HIBERNATE); if (error) { if (hibernation_ops->recover) @@ -445,6 +451,7 @@ int hibernation_platform_enter(void) hibernation_ops->finish(); Resume_devices: device_resume(PMSG_RESTORE); + __ftrace_enabled_restore(ftrace_save); resume_console(); Close: hibernation_ops->end(); From 24342c34a022ee90839873d91396045e12ef1090 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 28 Aug 2008 15:52:02 -0700 Subject: [PATCH 250/638] Linux 2.6.27-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 2e15e0b4483..f448e0082eb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Rotary Wombat # *DOCUMENTATION* From bb23b431db7405f6d79f989ad0236bf6428ba1cb Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 29 Aug 2008 11:47:07 +0200 Subject: [PATCH 251/638] remove blk_register_filter and blk_unregister_filter in gendisk This patch remove blk_register_filter and blk_unregister_filter in gendisk, and adds them to sd.c, sr.c. and ide-cd.c The commit abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 moved cmdfilter from gendisk to request_queue. It turned out that in some subsystems multiple gendisks share a single request_queue. So we get: Using physmap partition information Creating 3 MTD partitions on "physmap-flash": 0x00000000-0x01c00000 : "User FS" 0x01c00000-0x01c40000 : "booter" kobject (8511c410): tried to init an initialized object, something is seriously wrong. Call Trace: [<8036644c>] dump_stack+0x8/0x34 [<8021f050>] kobject_init+0x50/0xcc [<8021fa18>] kobject_init_and_add+0x24/0x58 [<8021d20c>] blk_register_filter+0x4c/0x64 [<8021c194>] add_disk+0x78/0xe0 [<8027d14c>] add_mtd_blktrans_dev+0x254/0x278 [<8027c8f0>] blktrans_notify_add+0x40/0x78 [<80279c00>] add_mtd_device+0xd0/0x150 [<8027b090>] add_mtd_partitions+0x568/0x5d8 [<80285458>] physmap_flash_probe+0x2ac/0x334 [<802644f8>] driver_probe_device+0x12c/0x244 [<8026465c>] __driver_attach+0x4c/0x84 [<80263c64>] bus_for_each_dev+0x58/0xac [<802633ec>] bus_add_driver+0xc4/0x24c [<802648e0>] driver_register+0xcc/0x184 [<80100460>] _stext+0x60/0x1bc In the long term, we need to fix such subsystems but we need a quick fix now. This patch add the command filter support to only sd and sr though it might be useful for other SG_IO users (such as cciss). Signed-off-by: FUJITA Tomonori Reported-by: Manuel Lauss Signed-off-by: Jens Axboe --- block/cmd-filter.c | 3 ++- block/genhd.c | 2 -- drivers/ide/ide-cd.c | 2 ++ drivers/scsi/sd.c | 2 ++ drivers/scsi/sr.c | 2 ++ 5 files changed, 8 insertions(+), 3 deletions(-) diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 1d4026206ac..228b6447e89 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -223,6 +223,7 @@ int blk_register_filter(struct gendisk *disk) return 0; } +EXPORT_SYMBOL(blk_register_filter); void blk_unregister_filter(struct gendisk *disk) { @@ -231,4 +232,4 @@ void blk_unregister_filter(struct gendisk *disk) kobject_put(&filter->kobj); kobject_put(disk->holder_dir->parent); } - +EXPORT_SYMBOL(blk_unregister_filter); diff --git a/block/genhd.c b/block/genhd.c index 656c2c7abf9..d9743ff6789 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -190,7 +190,6 @@ void add_disk(struct gendisk *disk) disk->minors, NULL, exact_match, exact_lock, disk); register_disk(disk); blk_register_queue(disk); - blk_register_filter(disk); bdi = &disk->queue->backing_dev_info; bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor)); @@ -203,7 +202,6 @@ EXPORT_SYMBOL(del_gendisk); /* in partitions/check.c */ void unlink_gendisk(struct gendisk *disk) { - blk_unregister_filter(disk); sysfs_remove_link(&disk->dev.kobj, "bdi"); bdi_unregister(&disk->queue->backing_dev_info); blk_unregister_queue(disk); diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 49a8c589e34..f1489999cf9 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1933,6 +1933,7 @@ static void ide_cd_remove(ide_drive_t *drive) ide_proc_unregister_driver(drive, info->driver); + blk_unregister_filter(info->disk); del_gendisk(info->disk); ide_cd_put(info); @@ -2158,6 +2159,7 @@ static int ide_cd_probe(ide_drive_t *drive) g->fops = &idecd_ops; g->flags |= GENHD_FL_REMOVABLE; add_disk(g); + blk_register_filter(g); return 0; out_free_cd: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e5e7d785645..2a2bc89aba8 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1875,6 +1875,7 @@ static int sd_probe(struct device *dev) dev_set_drvdata(dev, sdkp); add_disk(gd); + blk_register_filter(gd); sd_dif_config_host(sdkp); sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", @@ -1908,6 +1909,7 @@ static int sd_remove(struct device *dev) struct scsi_disk *sdkp = dev_get_drvdata(dev); device_del(&sdkp->dev); + blk_unregister_filter(sdkp->disk); del_gendisk(sdkp->disk); sd_shutdown(dev); diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 27f5bfd1def..3292965bfd8 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -656,6 +656,7 @@ static int sr_probe(struct device *dev) dev_set_drvdata(dev, cd); disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); + blk_register_filter(disk); sdev_printk(KERN_DEBUG, sdev, "Attached scsi CD-ROM %s\n", cd->cdi.name); @@ -894,6 +895,7 @@ static int sr_remove(struct device *dev) { struct scsi_cd *cd = dev_get_drvdata(dev); + blk_unregister_filter(cd->disk); del_gendisk(cd->disk); mutex_lock(&sr_ref_mutex); From df91bc23dcb052ff2da71b3482bf3c5fbf4b8a53 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Fri, 29 Aug 2008 13:08:34 +0200 Subject: [PATCH 252/638] ALSA: oxygen: fix distorted output on AK4396-based cards When changing the sample rate, the CMI8788's master clock output becomes unstable for a short time. The AK4396 needs the master clock to do SPI writes, so writing to an AK4396 control register directly after a sample rate change will garble the value. In our case, this leads to the DACs being misconfigured to I2S sample format, which results in a wrong output level and horrible distortions on samples louder than -6 dB. To fix this, we need to wait until the new master clock signal has become stable before doing SPI writes. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/hifier.c | 4 ++++ sound/pci/oxygen/oxygen.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 7442460583d..dad393ae040 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -107,6 +108,9 @@ static void set_ak4396_params(struct oxygen *chip, else value |= AK4396_DFS_QUAD; data->ak4396_ctl2 = value; + + msleep(1); /* wait for the new MCLK to become stable */ + ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB); ak4396_write(chip, AK4396_CONTROL_2, value); ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN); diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 7c8ae31eb46..c5829d30ef8 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -28,6 +28,7 @@ * GPIO 1 -> DFS1 of AK5385 */ +#include #include #include #include @@ -213,6 +214,9 @@ static void set_ak4396_params(struct oxygen *chip, else value |= AK4396_DFS_QUAD; data->ak4396_ctl2 = value; + + msleep(1); /* wait for the new MCLK to become stable */ + for (i = 0; i < 4; ++i) { ak4396_write(chip, i, AK4396_CONTROL_1, AK4396_DIF_24_MSB); From bfad9ceac5d11318c99ae8a0d1e926a380a56edd Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 2 Aug 2008 19:49:40 +0200 Subject: [PATCH 253/638] [SCSI] sd: select CRC_T10DIF only when necessary Signed-off-by: Stefan Richter Acked-by: "Martin K. Petersen" Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c7f06298bd3..4e0322b1c1e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -63,7 +63,7 @@ comment "SCSI support type (disk, tape, CD-ROM)" config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI - select CRC_T10DIF + select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, Serial ATA (SATA) or Parallel ATA (PATA) hard disks, From d4538817287e56abc938900886301a5bdfafbfcd Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:32 +0200 Subject: [PATCH 254/638] [SCSI] zfcp: Fix request queue locking The request queue lock can be acquired from softirq context when the SCSI midlayer issues commands. Disable softirqs for this lock when commands are issued from zfcp. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 56 +++++++++++++++++------------------ drivers/s390/scsi/zfcp_qdio.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 19c1ca91387..aad33241a2e 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -710,10 +710,10 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req) static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue) { - spin_lock(&queue->lock); + spin_lock_bh(&queue->lock); if (atomic_read(&queue->count)) return 1; - spin_unlock(&queue->lock); + spin_unlock_bh(&queue->lock); return 0; } @@ -722,13 +722,13 @@ static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter) long ret; struct zfcp_qdio_queue *req_q = &adapter->req_q; - spin_unlock(&req_q->lock); + spin_unlock_bh(&req_q->lock); ret = wait_event_interruptible_timeout(adapter->request_wq, zfcp_fsf_sbal_check(req_q), 5 * HZ); if (ret > 0) return 0; - spin_lock(&req_q->lock); + spin_lock_bh(&req_q->lock); return -EIO; } @@ -870,7 +870,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter) volatile struct qdio_buffer_element *sbale; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -910,7 +910,7 @@ failed_buf: zfcp_fsf_req_free(req); zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1106,7 +1106,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, struct zfcp_fsf_req *req; int ret = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1148,7 +1148,7 @@ failed_send: if (erp_action) erp_action->fsf_req = NULL; out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return ret; } @@ -1263,7 +1263,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) struct zfcp_adapter *adapter = erp_action->adapter; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; req = zfcp_fsf_req_create(adapter, @@ -1295,7 +1295,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1306,7 +1306,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, struct zfcp_fsf_req *req = NULL; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1334,7 +1334,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); @@ -1359,7 +1359,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) return -EOPNOTSUPP; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, @@ -1385,7 +1385,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1405,7 +1405,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT)) return -EOPNOTSUPP; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (!atomic_read(&adapter->req_q.count)) goto out; @@ -1427,7 +1427,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) wait_event(req->completion_wq, req->status & ZFCP_STATUS_FSFREQ_COMPLETED); @@ -1531,7 +1531,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1562,7 +1562,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1603,7 +1603,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1633,7 +1633,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1700,7 +1700,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1731,7 +1731,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1875,7 +1875,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -1910,7 +1910,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -1965,7 +1965,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) struct zfcp_fsf_req *req; int retval = -EIO; - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN, @@ -1995,7 +1995,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) erp_action->fsf_req = NULL; } out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); return retval; } @@ -2417,7 +2417,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, return ERR_PTR(-EINVAL); } - spin_lock(&adapter->req_q.lock); + spin_lock_bh(&adapter->req_q.lock); if (zfcp_fsf_req_sbal_get(adapter)) goto out; @@ -2447,7 +2447,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); retval = zfcp_fsf_req_send(req); out: - spin_unlock(&adapter->req_q.lock); + spin_unlock_bh(&adapter->req_q.lock); if (!retval) { wait_event(req->completion_wq, diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index d6dbd653fde..69d632d851d 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -423,9 +423,9 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter) /* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */ req_q = &adapter->req_q; - spin_lock(&req_q->lock); + spin_lock_bh(&req_q->lock); atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status); - spin_unlock(&req_q->lock); + spin_unlock_bh(&req_q->lock); qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR); From 47f7bba52b01dd881fbd17b4b50c89ecf186eee2 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:33 +0200 Subject: [PATCH 255/638] [SCSI] zfcp: Correctly query end flag in gpn_ft response When the last port entry in the gpn_ft response is already a known port, the eval function would skip the end flag and try to attach ports with wwpn 0. Fix this by checking the flag first. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index e984469bb98..27edabe5b20 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -475,7 +475,7 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) struct zfcp_adapter *adapter = ct->port->adapter; struct zfcp_port *port, *tmp; u32 d_id; - int ret = 0, x; + int ret = 0, x, last = 0; if (ct->status) return -EIO; @@ -492,12 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) down(&zfcp_data.config_sema); /* first entry is the header */ - for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) { + for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) { if (x % (ZFCP_GPN_FT_ENTRIES + 1)) acc++; else acc = sg_virt(++sg); + last = acc->control & 0x80; d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 | acc->port_id[2]; @@ -513,8 +514,6 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) ret = PTR_ERR(port); else zfcp_erp_port_reopen(port, 0, 149, NULL); - if (acc->control & 0x80) /* last entry */ - break; } zfcp_erp_wait(adapter); From f48bf7fb00f74d93105ba69522a3f6c9435d6af3 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 21 Aug 2008 13:43:34 +0200 Subject: [PATCH 256/638] [SCSI] zfcp: Simplify ccw notify handler The notify handler does not change the list of adapters, it only triggers erp actions to open or shutdown the adapter. We don't need to hold the config semaphore and wait for the erp to complete. This is a prerequisite for a fix in the s390 common i/o code. Signed-off-by: Christof Schmitt Signed-off-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ccw.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 391dd29749f..51b6a05f4d1 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -152,10 +152,8 @@ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) */ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) { - struct zfcp_adapter *adapter; + struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev); - down(&zfcp_data.config_sema); - adapter = dev_get_drvdata(&ccw_device->dev); switch (event) { case CIO_GONE: dev_warn(&adapter->ccw_device->dev, "device gone\n"); @@ -174,8 +172,6 @@ static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event) 89, NULL); break; } - zfcp_erp_wait(adapter); - up(&zfcp_data.config_sema); return 1; } From 9528539cc2d506aa232b0d93881ac4d19738752f Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 21 Aug 2008 13:43:35 +0200 Subject: [PATCH 257/638] [SCSI] zfcp: Fix reference counter for remote ports Fix the remote port reference counter handling during ELS ADISC commands and find the remote port by WWPN not by D_IDs that could change. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 27edabe5b20..05e6b09c48f 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -39,18 +39,6 @@ struct zfcp_gpn_ft { struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS]; }; -static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter, - u32 d_id) -{ - struct zfcp_port *port; - - list_for_each_entry(port, &adapter->port_list_head, list) - if ((port->d_id == d_id) && - !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status)) - return port; - return NULL; -} - static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, struct fcp_rscn_element *elem) { @@ -341,12 +329,13 @@ void zfcp_test_link(struct zfcp_port *port) zfcp_port_get(port); retval = zfcp_fc_adisc(port); - if (retval == 0 || retval == -EBUSY) + if (retval == 0) return; /* send of ADISC was not possible */ zfcp_port_put(port); - zfcp_erp_port_forced_reopen(port, 0, 65, NULL); + if (retval != -EBUSY) + zfcp_erp_port_forced_reopen(port, 0, 65, NULL); } static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter) @@ -503,9 +492,13 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft) acc->port_id[2]; /* skip the adapter's port and known remote ports */ - if (acc->wwpn == fc_host_port_name(adapter->scsi_host) || - zfcp_get_port_by_did(adapter, d_id)) + if (acc->wwpn == fc_host_port_name(adapter->scsi_host)) continue; + port = zfcp_get_port_by_wwpn(adapter, acc->wwpn); + if (port) { + zfcp_port_get(port); + continue; + } port = zfcp_port_enqueue(adapter, acc->wwpn, ZFCP_STATUS_PORT_DID_DID | From 6139308dca9437975125290698cb9306240f525c Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Thu, 21 Aug 2008 13:43:36 +0200 Subject: [PATCH 258/638] [SCSI] zfcp: channel cannot be detached due to refcount imbalance Due to an imbalance of the nameserver refcounting, channel devices couldn't be take offline anymore after the channel was activated. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 05e6b09c48f..56196c98c07 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -352,7 +352,6 @@ static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter) if (ret) return ret; zfcp_erp_wait(adapter); - zfcp_port_put(adapter->nameserver_port); } return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->nameserver_port->status); From 025270f0eaa2def673747ed6f77cca41f694f354 Mon Sep 17 00:00:00 2001 From: Hirofumi Nakagawa Date: Thu, 21 Aug 2008 13:43:37 +0200 Subject: [PATCH 259/638] [SCSI] zfcp: Remove duplicated unlikely() macros. Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless codes although there is no real effect on the kernel's behaviour. Signed-off-by: Hirofumi Nakagawa Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index aad33241a2e..49dbeb754e5 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -877,7 +877,7 @@ int zfcp_fsf_status_read(struct zfcp_adapter *adapter) req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS, ZFCP_REQ_NO_QTCB, adapter->pool.fsf_req_status_read); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -988,7 +988,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (unlikely(IS_ERR(req))) + if (IS_ERR(req)) goto out; if (unlikely(!(atomic_read(&unit->status) & @@ -1112,7 +1112,7 @@ int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool, req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC, ZFCP_REQ_AUTO_CLEANUP, pool); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { ret = PTR_ERR(req); goto out; } @@ -1223,7 +1223,7 @@ int zfcp_fsf_send_els(struct zfcp_send_els *els) goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS, ZFCP_REQ_AUTO_CLEANUP, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { ret = PTR_ERR(req); goto out; } @@ -1270,7 +1270,7 @@ int zfcp_fsf_exchange_config_data(struct zfcp_erp_action *erp_action) FSF_QTCB_EXCHANGE_CONFIG_DATA, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1312,7 +1312,7 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter, req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1365,7 +1365,7 @@ int zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1411,7 +1411,7 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1539,7 +1539,7 @@ int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action) FSF_QTCB_OPEN_PORT_WITH_DID, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1610,7 +1610,7 @@ int zfcp_fsf_close_port(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1707,7 +1707,7 @@ int zfcp_fsf_close_physical_port(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1882,7 +1882,7 @@ int zfcp_fsf_open_unit(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -1971,7 +1971,7 @@ int zfcp_fsf_close_unit(struct zfcp_erp_action *erp_action) req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN, ZFCP_REQ_AUTO_CLEANUP, adapter->pool.fsf_req_erp); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -2228,7 +2228,7 @@ int zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = PTR_ERR(req); goto out; } @@ -2351,7 +2351,7 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (unlikely(IS_ERR(req))) + if (IS_ERR(req)) goto out; req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; @@ -2422,7 +2422,7 @@ struct zfcp_fsf_req *zfcp_fsf_control_file(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL); - if (unlikely(IS_ERR(req))) { + if (IS_ERR(req)) { retval = -EPERM; goto out; } From c7dbb627a2505f42b2e6b3581f3716d73453dd0c Mon Sep 17 00:00:00 2001 From: Mike Anderson Date: Tue, 12 Aug 2008 12:11:57 -0700 Subject: [PATCH 260/638] [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE Change scsi_dh check_sense functions to return ADD_TO_MLQUEUE to allow retries to occur without restriction of blk_noretry_request check. Signed-off-by: Mike Anderson Acked-by: Chandra Seetharaman Signed-off-by: James Bottomley --- drivers/scsi/device_handler/scsi_dh_alua.c | 12 ++++++------ drivers/scsi/device_handler/scsi_dh_emc.c | 4 ++-- drivers/scsi/device_handler/scsi_dh_rdac.c | 4 ++-- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 994da56fffe..708e475896b 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -425,7 +425,7 @@ static int alua_check_sense(struct scsi_device *sdev, /* * LUN Not Accessible - ALUA state transition */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b) /* * LUN Not Accessible -- Target port in standby state @@ -447,18 +447,18 @@ static int alua_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) { /* * ALUA state changed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) { /* * Implicit ALUA state transition failed */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; } break; } @@ -490,7 +490,7 @@ static int alua_stpg(struct scsi_device *sdev, int state, if (!err) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } @@ -535,7 +535,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) return SCSI_DH_IO; err = alua_check_sense(sdev, &sense_hdr); - if (err == NEEDS_RETRY) + if (err == ADD_TO_MLQUEUE) goto retry; sdev_printk(KERN_INFO, sdev, "%s: rtpg sense code %02x/%02x/%02x\n", diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index b9d23e9e9a4..ef693e8412e 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -439,7 +439,7 @@ static int clariion_check_sense(struct scsi_device *sdev, * Unit Attention Code. This is the first IO * to the new path, so just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } @@ -514,7 +514,7 @@ retry: return SCSI_DH_IO; err = clariion_check_sense(sdev, &sshdr); - if (retry > 0 && err == NEEDS_RETRY) { + if (retry > 0 && err == ADD_TO_MLQUEUE) { retry--; goto retry; } diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 2dee69da35c..6e2f130d56d 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -551,7 +551,7 @@ static int rdac_check_sense(struct scsi_device *sdev, * * Just retry and wait. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; case ILLEGAL_REQUEST: if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) { @@ -568,7 +568,7 @@ static int rdac_check_sense(struct scsi_device *sdev, /* * Power On, Reset, or Bus Device Reset, just retry. */ - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; break; } /* success just means we do not care what scsi-ml does */ From bb0003c1e189d5766b6b39299b08c690c985c4dc Mon Sep 17 00:00:00 2001 From: Mike Anderson Date: Tue, 12 Aug 2008 12:11:58 -0700 Subject: [PATCH 261/638] [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry Change scsi_check_sense HARDWARE_ERROR check to return ADD_TO_MLQUEUE if device->retry_hwerror is set to allow retries to occur without restriction of blk_noretry_request check. Signed-off-by: Mike Anderson Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 880051c89bd..39ce3aba1da 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -391,7 +391,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) case HARDWARE_ERROR: if (scmd->device->retry_hwerror) - return NEEDS_RETRY; + return ADD_TO_MLQUEUE; else return SUCCESS; From 01b291bd66564b4bd826326af6bd0b6d17e99439 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 21 Aug 2008 15:14:14 -0500 Subject: [PATCH 262/638] [SCSI] fix check of PQ and PDT bits for WLUNs For IBM z series certain LUNs can no longer be accessed. This is because kernel version 2.6.19 a check was introduced not to create a generic SCSI device for devices that return PQ=1 and PDT=0x1f. For WLUNs (see SAM-3, p. 41ff) generic SCSI devices should be created unconditionally without looking at the PQ bit, so add a check for WLUNs in with this test. Acked-by: Martin Petermann Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 3 ++- include/scsi/scsi.h | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 84b4879cff1..34d0de6cd51 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1080,7 +1080,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * PDT=1Fh none (no FDD connected to the requested logical unit) */ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) && - (result[0] & 0x1f) == 0x1f) { + (result[0] & 0x1f) == 0x1f && + !scsi_is_wlun(lun)) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: peripheral device type" " of 31, no device added\n")); diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 5c40cc537d4..192f8716aa9 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -308,6 +308,20 @@ struct scsi_lun { __u8 scsi_lun[8]; }; +/* + * The Well Known LUNS (SAM-3) in our int representation of a LUN + */ +#define SCSI_W_LUN_BASE 0xc100 +#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) +#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) +#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) + +static inline int scsi_is_wlun(unsigned int lun) +{ + return (lun & 0xff00) == SCSI_W_LUN_BASE; +} + + /* * MESSAGE CODES */ From 3cc76caa98b092a8fb3e7b4303c70f847db0651f Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Fri, 29 Aug 2008 14:06:51 -0700 Subject: [PATCH 263/638] ipv6: When we droped a packet, we should return NET_RX_DROP instead of 0 Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller --- net/ipv6/raw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 01d47674f7e..e53e493606c 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -377,14 +377,14 @@ static inline int rawv6_rcv_skb(struct sock * sk, struct sk_buff * skb) skb_checksum_complete(skb)) { atomic_inc(&sk->sk_drops); kfree_skb(skb); - return 0; + return NET_RX_DROP; } /* Charge it to the socket. */ if (sock_queue_rcv_skb(sk,skb)<0) { atomic_inc(&sk->sk_drops); kfree_skb(skb); - return 0; + return NET_RX_DROP; } return 0; @@ -429,7 +429,7 @@ int rawv6_rcv(struct sock *sk, struct sk_buff *skb) if (skb_checksum_complete(skb)) { atomic_inc(&sk->sk_drops); kfree_skb(skb); - return 0; + return NET_RX_DROP; } } From 102396ae65108b026e4e1868e30fa013f45a169e Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Fri, 29 Aug 2008 14:21:52 -0700 Subject: [PATCH 264/638] pkt_sched: Fix locking of qdisc_root with qdisc_root_sleeping_lock() Use qdisc_root_sleeping_lock() instead of qdisc_root_lock() where appropriate. The only difference is while dev is deactivated, when currently we can use a sleeping qdisc with the lock of noop_qdisc. This shouldn't be dangerous since after deactivation root lock could be used only by gen_estimator code, but looks wrong anyway. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/sched/cls_api.c | 2 +- net/sched/cls_route.c | 2 +- net/sched/sch_api.c | 8 ++++---- net/sched/sch_cbq.c | 2 +- net/sched/sch_htb.c | 4 ++-- net/sched/sch_netem.c | 2 +- net/sched/sch_teql.c | 2 +- 7 files changed, 11 insertions(+), 11 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 5cafdd4c801..8eb79e92e94 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -205,7 +205,7 @@ replay: } } - root_lock = qdisc_root_lock(q); + root_lock = qdisc_root_sleeping_lock(q); if (tp == NULL) { /* Proto-tcf does not exist, create new one */ diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c index 481260a4f10..e3d8455eebc 100644 --- a/net/sched/cls_route.c +++ b/net/sched/cls_route.c @@ -75,7 +75,7 @@ static __inline__ int route4_fastmap_hash(u32 id, int iif) static inline void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id) { - spinlock_t *root_lock = qdisc_root_lock(q); + spinlock_t *root_lock = qdisc_root_sleeping_lock(q); spin_lock_bh(root_lock); memset(head->fastmap, 0, sizeof(head->fastmap)); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 506b709510b..1122c952aa9 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1169,8 +1169,8 @@ static int tc_fill_qdisc(struct sk_buff *skb, struct Qdisc *q, u32 clid, if (q->stab && qdisc_dump_stab(skb, q->stab) < 0) goto nla_put_failure; - if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, - TCA_XSTATS, qdisc_root_lock(q), &d) < 0) + if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS, + qdisc_root_sleeping_lock(q), &d) < 0) goto nla_put_failure; if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0) @@ -1461,8 +1461,8 @@ static int tc_fill_tclass(struct sk_buff *skb, struct Qdisc *q, if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0) goto nla_put_failure; - if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, - TCA_XSTATS, qdisc_root_lock(q), &d) < 0) + if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS, + qdisc_root_sleeping_lock(q), &d) < 0) goto nla_put_failure; if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0) diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 9b720adedea..8b06fa90048 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1754,7 +1754,7 @@ static void cbq_put(struct Qdisc *sch, unsigned long arg) if (--cl->refcnt == 0) { #ifdef CONFIG_NET_CLS_ACT - spinlock_t *root_lock = qdisc_root_lock(sch); + spinlock_t *root_lock = qdisc_root_sleeping_lock(sch); struct cbq_sched_data *q = qdisc_priv(sch); spin_lock_bh(root_lock); diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 97d4761cc31..d14f02056ae 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1043,7 +1043,7 @@ static int htb_init(struct Qdisc *sch, struct nlattr *opt) static int htb_dump(struct Qdisc *sch, struct sk_buff *skb) { - spinlock_t *root_lock = qdisc_root_lock(sch); + spinlock_t *root_lock = qdisc_root_sleeping_lock(sch); struct htb_sched *q = qdisc_priv(sch); struct nlattr *nest; struct tc_htb_glob gopt; @@ -1075,7 +1075,7 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, struct sk_buff *skb, struct tcmsg *tcm) { struct htb_class *cl = (struct htb_class *)arg; - spinlock_t *root_lock = qdisc_root_lock(sch); + spinlock_t *root_lock = qdisc_root_sleeping_lock(sch); struct nlattr *nest; struct tc_htb_opt opt; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index fb0294d0b55..3781e55046d 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -341,7 +341,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr) for (i = 0; i < n; i++) d->table[i] = data[i]; - root_lock = qdisc_root_lock(sch); + root_lock = qdisc_root_sleeping_lock(sch); spin_lock_bh(root_lock); d = xchg(&q->delay_dist, d); diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 2c35c678563..d35ef059abb 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -161,7 +161,7 @@ teql_destroy(struct Qdisc* sch) txq = netdev_get_tx_queue(master->dev, 0); master->slaves = NULL; - root_lock = qdisc_root_lock(txq->qdisc); + root_lock = qdisc_root_sleeping_lock(txq->qdisc); spin_lock_bh(root_lock); qdisc_reset(txq->qdisc); spin_unlock_bh(root_lock); From 7c19a3d280297d43ef5ff7c6b205dc208a16d3d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 Aug 2008 14:37:23 -0700 Subject: [PATCH 265/638] net: Unbreak userspace usage of linux/mroute.h Nothing in linux/pim.h should be exported to userspace. This should fix the XORP build failure reported by Jose Calhariz, the debain package maintainer. Nothing originally in linux/mroute.h was exported to userspace ever, but some of this stuff started to be when it was moved into this new linux/pim.h, and that was wrong. If we didn't provide these definitions for 10 years we can reasonably expect that applications defined this stuff locally or used GLIBC headers providing the protocol definitions. And as such the only result of this can be conflict and userland build breakage. Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 - include/linux/mroute.h | 2 +- include/linux/mroute6.h | 1 + include/linux/pim.h | 18 ------------------ 4 files changed, 2 insertions(+), 20 deletions(-) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 7d970678f94..59391250d51 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -297,7 +297,6 @@ unifdef-y += parport.h unifdef-y += patchkey.h unifdef-y += pci.h unifdef-y += personality.h -unifdef-y += pim.h unifdef-y += pktcdvd.h unifdef-y += pmu.h unifdef-y += poll.h diff --git a/include/linux/mroute.h b/include/linux/mroute.h index 07112ee9293..8a455694d68 100644 --- a/include/linux/mroute.h +++ b/include/linux/mroute.h @@ -6,7 +6,6 @@ #ifdef __KERNEL__ #include #endif -#include /* * Based on the MROUTING 3.5 defines primarily to keep @@ -130,6 +129,7 @@ struct igmpmsg */ #ifdef __KERNEL__ +#include #include #ifdef CONFIG_IP_MROUTE diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h index 5cf50473a10..6f4c180179e 100644 --- a/include/linux/mroute6.h +++ b/include/linux/mroute6.h @@ -115,6 +115,7 @@ struct sioc_mif_req6 #ifdef __KERNEL__ +#include #include /* for struct sk_buff_head */ #ifdef CONFIG_IPV6_MROUTE diff --git a/include/linux/pim.h b/include/linux/pim.h index 236ffd31739..1ba0661561a 100644 --- a/include/linux/pim.h +++ b/include/linux/pim.h @@ -3,22 +3,6 @@ #include -#ifndef __KERNEL__ -struct pim { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 pim_type:4, /* PIM message type */ - pim_ver:4; /* PIM version */ -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 pim_ver:4; /* PIM version */ - pim_type:4; /* PIM message type */ -#endif - __u8 pim_rsv; /* Reserved */ - __be16 pim_cksum; /* Checksum */ -}; - -#define PIM_MINLEN 8 -#endif - /* Message types - V1 */ #define PIM_V1_VERSION __constant_htonl(0x10000000) #define PIM_V1_REGISTER 1 @@ -27,7 +11,6 @@ struct pim { #define PIM_VERSION 2 #define PIM_REGISTER 1 -#if defined(__KERNEL__) #define PIM_NULL_REGISTER __constant_htonl(0x40000000) /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */ @@ -42,4 +25,3 @@ struct pimreghdr struct sk_buff; extern int pim_rcv_v1(struct sk_buff *); #endif -#endif From b4609472116bb806a95e98d04767189406c74c70 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Aug 2008 14:38:03 -0700 Subject: [PATCH 266/638] Revert "x86: fix HPET regression in 2.6.26 versus 2.6.25, check hpet against BAR, v3" This reverts commit a2bd7274b47124d2fc4dfdb8c0591f545ba749dd. It wasn't really right to begin with (there's a better fix for the problem with e820 reservations clashing with PCI BAR's pending), but it also actually causes more regressions, so it should be reverted even before the better fix is finalized. Rafael reports that this commit broke AHCI detection, and thus causes the kernel to not boot on his quad core test box. Reported-and-bisected-by: Rafael J. Wysocki Cc: Yinghai Lu Cc: David Witbrodt Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- arch/x86/pci/i386.c | 78 --------------------------------------------- 1 file changed, 78 deletions(-) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index d765da91384..5807d1bc73f 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -31,11 +31,8 @@ #include #include #include -#include #include -#include -#include #include "pci.h" @@ -80,77 +77,6 @@ pcibios_align_resource(void *data, struct resource *res, } EXPORT_SYMBOL(pcibios_align_resource); -static int check_res_with_valid(struct pci_dev *dev, struct resource *res) -{ - unsigned long base; - unsigned long size; - int i; - - base = res->start; - size = (res->start == 0 && res->end == res->start) ? 0 : - (res->end - res->start + 1); - - if (!base || !size) - return 0; - -#ifdef CONFIG_HPET_TIMER - /* for hpet */ - if (base == hpet_address && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } -#endif - -#ifdef CONFIG_X86_IO_APIC - for (i = 0; i < nr_ioapics; i++) { - unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr; - - if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } - } -#endif - -#ifdef CONFIG_PCI_MMCONFIG - for (i = 0; i < pci_mmcfg_config_num; i++) { - unsigned long addr; - - addr = pci_mmcfg_config[i].address; - if (base == addr && (res->flags & IORESOURCE_MEM)) { - dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n", - base, base + size - 1); - return 1; - } - } -#endif - - return 0; -} - -static int check_platform(struct pci_dev *dev, struct resource *res) -{ - struct resource *root = NULL; - - /* - * forcibly insert it into the - * resource tree - */ - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - else if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - - if (root && check_res_with_valid(dev, res)) { - insert_resource(root, res); - - return 1; - } - - return 0; -} /* * Handle resources of PCI devices. If the world were perfect, we could * just allocate all the resource regions and do nothing more. It isn't. @@ -202,8 +128,6 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { - if (check_platform(dev, r)) - continue; dev_err(&dev->dev, "BAR %d: can't " "allocate resource\n", idx); /* @@ -247,8 +171,6 @@ static void __init pcibios_allocate_resources(int pass) r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - if (check_platform(dev, r)) - continue; dev_err(&dev->dev, "BAR %d: can't " "allocate resource\n", idx); /* We'll assign a new address later */ From 316d9679f33caf7e683471647d1472bfe133d858 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 29 Aug 2008 20:06:23 +0200 Subject: [PATCH 267/638] Don't trigger softlockup detector on network fs blocked tasks Pulling the ethernet cable on a 2.6.27-rc system with NFS mounts currently leads to an ongoing flood of soft lockup detector backtraces for all tasks blocked on the NFS mounts when the hickup takes longer than 120s. I don't think NFS problems should be all that noisy. Luckily there's a reasonably easy way to distingush this case. Don't report task softlockup warnings for tasks in TASK_KILLABLE state, which is used by the network file systems. I believe this patch is a 2.6.27 candidate. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- kernel/softlockup.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index b75b492fbfc..1a07f8ca4b9 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -180,6 +180,10 @@ static void check_hung_task(struct task_struct *t, unsigned long now) if (t->flags & PF_FROZEN) return; + /* Don't check for tasks waiting on network file systems like NFS */ + if (t->state & TASK_KILLABLE) + return; + if (switch_count != t->last_switch_count || !t->last_switch_timestamp) { t->last_switch_count = switch_count; t->last_switch_timestamp = now; From bef69ea0dcce574a425feb0a5aa4c63dd108b9a6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 29 Aug 2008 20:18:31 -0700 Subject: [PATCH 268/638] Resource handling: add 'insert_resource_expand_to_fit()' function Not used anywhere yet, but this complements the existing plain 'insert_resource()' functionality with a version that can expand the resource we are adding in order to fix up any conflicts it has with existing resources. Signed-off-by: Linus Torvalds --- include/linux/ioport.h | 1 + kernel/resource.c | 88 ++++++++++++++++++++++++++++++------------ 2 files changed, 64 insertions(+), 25 deletions(-) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 22d2115458c..8d3b7a9afd1 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -109,6 +109,7 @@ extern struct resource iomem_resource; extern int request_resource(struct resource *root, struct resource *new); extern int release_resource(struct resource *new); extern int insert_resource(struct resource *parent, struct resource *new); +extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new); extern int allocate_resource(struct resource *root, struct resource *new, resource_size_t size, resource_size_t min, resource_size_t max, resource_size_t align, diff --git a/kernel/resource.c b/kernel/resource.c index f5b518eabef..cf0a178c751 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -362,35 +362,21 @@ int allocate_resource(struct resource *root, struct resource *new, EXPORT_SYMBOL(allocate_resource); -/** - * insert_resource - Inserts a resource in the resource tree - * @parent: parent of the new resource - * @new: new resource to insert - * - * Returns 0 on success, -EBUSY if the resource can't be inserted. - * - * This function is equivalent to request_resource when no conflict - * happens. If a conflict happens, and the conflicting resources - * entirely fit within the range of the new resource, then the new - * resource is inserted and the conflicting resources become children of - * the new resource. +/* + * Insert a resource into the resource tree. If successful, return NULL, + * otherwise return the conflicting resource (compare to __request_resource()) */ -int insert_resource(struct resource *parent, struct resource *new) +static struct resource * __insert_resource(struct resource *parent, struct resource *new) { - int result; struct resource *first, *next; - write_lock(&resource_lock); - for (;; parent = first) { - result = 0; first = __request_resource(parent, new); if (!first) - goto out; + return first; - result = -EBUSY; if (first == parent) - goto out; + return first; if ((first->start > new->start) || (first->end < new->end)) break; @@ -401,15 +387,13 @@ int insert_resource(struct resource *parent, struct resource *new) for (next = first; ; next = next->sibling) { /* Partial overlap? Bad, and unfixable */ if (next->start < new->start || next->end > new->end) - goto out; + return next; if (!next->sibling) break; if (next->sibling->start > new->end) break; } - result = 0; - new->parent = parent; new->sibling = next->sibling; new->child = first; @@ -426,10 +410,64 @@ int insert_resource(struct resource *parent, struct resource *new) next = next->sibling; next->sibling = new; } + return NULL; +} - out: +/** + * insert_resource - Inserts a resource in the resource tree + * @parent: parent of the new resource + * @new: new resource to insert + * + * Returns 0 on success, -EBUSY if the resource can't be inserted. + * + * This function is equivalent to request_resource when no conflict + * happens. If a conflict happens, and the conflicting resources + * entirely fit within the range of the new resource, then the new + * resource is inserted and the conflicting resources become children of + * the new resource. + */ +int insert_resource(struct resource *parent, struct resource *new) +{ + struct resource *conflict; + + write_lock(&resource_lock); + conflict = __insert_resource(parent, new); + write_unlock(&resource_lock); + return conflict ? -EBUSY : 0; +} + +/** + * insert_resource_expand_to_fit - Insert a resource into the resource tree + * @parent: parent of the new resource + * @new: new resource to insert + * + * Insert a resource into the resource tree, possibly expanding it in order + * to make it encompass any conflicting resources. + */ +void insert_resource_expand_to_fit(struct resource *root, struct resource *new) +{ + if (new->parent) + return; + + write_lock(&resource_lock); + for (;;) { + struct resource *conflict; + + conflict = __insert_resource(root, new); + if (!conflict) + break; + if (conflict == root) + break; + + /* Ok, expand resource to cover the conflict, then try again .. */ + if (conflict->start < new->start) + new->start = conflict->start; + if (conflict->end > new->end) + new->end = conflict->end; + + printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name); + } write_unlock(&resource_lock); - return result; } /** From 8191e1fa8131a422f4bf7b0f2dc1f8543fd17783 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 22 Aug 2008 12:26:40 +0300 Subject: [PATCH 269/638] UBIFS: do not update min_idx_lebs in stafs This is bad because the rest of the code should not depend on it, and this may hide bugss, instead of revealing them. Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index 15409815747..ac0d2e1e73b 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -741,7 +741,6 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c) available = ubifs_calc_available(c, min_idx_lebs); outstanding = c->budg_data_growth + c->budg_dd_growth; - c->min_idx_lebs = min_idx_lebs; spin_unlock(&c->space_lock); if (available > outstanding) From 9e5de3549615818cae9c20a0ee1fd3ad4a747758 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 17:29:43 +0300 Subject: [PATCH 270/638] UBIFS: push empty flash hack down We have a hack which forces the amount of flash space to be equivalent to 'c->blocks_cnt' in case of empty FS. This is to make users happy and see '%0' used in 'df' when they mount an empty FS. This hack is not needed in 'ubifs_calc_available()', but it is only needed the caller, in 'ubifs_budg_get_free_space()'. So push it down there. Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 24 +++++++++++------------- fs/ubifs/super.c | 2 -- 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index ac0d2e1e73b..f6d2eaa7a06 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -302,18 +302,6 @@ long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs) int subtract_lebs; long long available; - /* - * Force the amount available to the total size reported if the used - * space is zero. - */ - if (c->lst.total_used <= UBIFS_INO_NODE_SZ && - c->budg_data_growth + c->budg_dd_growth == 0) { - /* Do the same calculation as for c->block_cnt */ - available = c->main_lebs - 2; - available *= c->leb_size - c->dark_wm; - return available; - } - available = c->main_bytes - c->lst.total_used; /* @@ -739,8 +727,18 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c) return 0; } - available = ubifs_calc_available(c, min_idx_lebs); outstanding = c->budg_data_growth + c->budg_dd_growth; + + /* + * Force the amount available to the total size reported if the used + * space is zero. + */ + if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) { + spin_unlock(&c->space_lock); + return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT; + } + + available = ubifs_calc_available(c, min_idx_lebs); spin_unlock(&c->space_lock); if (available > outstanding) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index f71e6b8822c..1018053519e 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -649,8 +649,6 @@ static int init_constants_late(struct ubifs_info *c) * * Subtract the LEB reserved for GC and the LEB which is reserved for * deletions. - * - * Review 'ubifs_calc_available()' if changing this calculation. */ tmp64 = c->main_lebs - 2; tmp64 *= (uint64_t)c->leb_size - c->dark_wm; From 8aabb75017291ba68c09ff5fdb998ef0a1fdaaf9 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 16:02:31 +0300 Subject: [PATCH 271/638] UBIFS: remove incorrect index space check When we report free space to user-space, we should not report 0 if the amount of empty LEBs is too low, because they would be produced by GC when needed. Thus, just call 'ubifs_calc_available()' straight away which would take 'min_idx_lebs' into account anyway. Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index f6d2eaa7a06..9ef630a594c 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -709,24 +709,11 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c, */ long long ubifs_budg_get_free_space(struct ubifs_info *c) { - int min_idx_lebs, rsvd_idx_lebs; + int min_idx_lebs; long long available, outstanding, free; - /* Do exactly the same calculations as in 'do_budget_space()' */ spin_lock(&c->space_lock); min_idx_lebs = ubifs_calc_min_idx_lebs(c); - - if (min_idx_lebs > c->lst.idx_lebs) - rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs; - else - rsvd_idx_lebs = 0; - - if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - - c->lst.taken_empty_lebs) { - spin_unlock(&c->space_lock); - return 0; - } - outstanding = c->budg_data_growth + c->budg_dd_growth; /* From 4b5f2762ec914c9dfd0e9d2377c0574f2ee9a8f9 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 16:15:56 +0300 Subject: [PATCH 272/638] UBIFS: improve statfs reporting Make free space calculation less pessimistic and more realistic, which in turn improves 'statfs()' reports. Now it lies by 10%-20%, instead of 20%-30% (10% more honest). Results of "freespace" test (120MiB volume, 16KiB LEB size, 512 bytes page size). Before the change: freespace: Test 1: fill the space we have 3 times freespace: was free: 78274560 bytes 74.6 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 18214912 bytes 17.4 MiB, wrote 23.3% more than predicted freespace: was free: 76754944 bytes 73.2 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 19738624 bytes 18.8 MiB, wrote 25.7% more than predicted freespace: was free: 76759040 bytes 73.2 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 19730432 bytes 18.8 MiB, wrote 25.7% more than predicted freespace: Test 1 finished freespace: Test 2: gradually lessen amount of free space and fill the FS freespace: do 10 steps, lessen free space by 6977722 bytes 6.7 MiB each time freespace: was free: 72273920 bytes 68.9 MiB, wrote: 88891392 bytes 84.8 MiB, delta: 16617472 bytes 15.8 MiB, wrote 23.0% more than predicted freespace: was free: 66154496 bytes 63.1 MiB, wrote: 81506304 bytes 77.7 MiB, delta: 15351808 bytes 14.6 MiB, wrote 23.2% more than predicted freespace: was free: 58732544 bytes 56.0 MiB, wrote: 72572928 bytes 69.2 MiB, delta: 13840384 bytes 13.2 MiB, wrote 23.6% more than predicted freespace: was free: 51552256 bytes 49.2 MiB, wrote: 63754240 bytes 60.8 MiB, delta: 12201984 bytes 11.6 MiB, wrote 23.7% more than predicted freespace: was free: 44404736 bytes 42.3 MiB, wrote: 54943744 bytes 52.4 MiB, delta: 10539008 bytes 10.1 MiB, wrote 23.7% more than predicted freespace: was free: 37285888 bytes 35.6 MiB, wrote: 46161920 bytes 44.0 MiB, delta: 8876032 bytes 8.5 MiB, wrote 23.8% more than predicted freespace: was free: 30171136 bytes 28.8 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 7213056 bytes 6.9 MiB, wrote 23.9% more than predicted freespace: was free: 23048192 bytes 22.0 MiB, wrote: 28606464 bytes 27.3 MiB, delta: 5558272 bytes 5.3 MiB, wrote 24.1% more than predicted freespace: was free: 15941632 bytes 15.2 MiB, wrote: 19828736 bytes 18.9 MiB, delta: 3887104 bytes 3.7 MiB, wrote 24.4% more than predicted freespace: was free: 8830976 bytes 8.4 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 2232320 bytes 2.1 MiB, wrote 25.3% more than predicted freespace: Test 2 finished freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS freespace: do 10 steps, lessen free space by 6985541 bytes 6.7 MiB each time freespace: trashing: was free: 76840960 bytes 73.3 MiB, need free: 6985550 bytes 6.7 MiB, files created: 248311, delete 225737 (90.9% of them) freespace: was free: 65228800 bytes 62.2 MiB, wrote: 82530304 bytes 78.7 MiB, delta: 17301504 bytes 16.5 MiB, wrote 26.5% more than predicted freespace: trashing: was free: 74485760 bytes 71.0 MiB, need free: 13971091 bytes 13.3 MiB, files created: 248712, delete 202061 (81.2% of them) freespace: was free: 55025664 bytes 52.5 MiB, wrote: 71925760 bytes 68.6 MiB, delta: 16900096 bytes 16.1 MiB, wrote 30.7% more than predicted freespace: trashing: was free: 75550720 bytes 72.1 MiB, need free: 20956632 bytes 20.0 MiB, files created: 248849, delete 179822 (72.3% of them) freespace: was free: 46669824 bytes 44.5 MiB, wrote: 63197184 bytes 60.3 MiB, delta: 16527360 bytes 15.8 MiB, wrote 35.4% more than predicted freespace: trashing: was free: 76214272 bytes 72.7 MiB, need free: 27942173 bytes 26.6 MiB, files created: 248789, delete 157576 (63.3% of them) freespace: was free: 39129088 bytes 37.3 MiB, wrote: 55164928 bytes 52.6 MiB, delta: 16035840 bytes 15.3 MiB, wrote 41.0% more than predicted freespace: trashing: was free: 77398016 bytes 73.8 MiB, need free: 34927714 bytes 33.3 MiB, files created: 248711, delete 136474 (54.9% of them) freespace: was free: 32325632 bytes 30.8 MiB, wrote: 48234496 bytes 46.0 MiB, delta: 15908864 bytes 15.2 MiB, wrote 49.2% more than predicted freespace: trashing: was free: 75796480 bytes 72.3 MiB, need free: 41913255 bytes 40.0 MiB, files created: 248674, delete 111164 (44.7% of them) freespace: was free: 25079808 bytes 23.9 MiB, wrote: 40775680 bytes 38.9 MiB, delta: 15695872 bytes 15.0 MiB, wrote 62.6% more than predicted freespace: trashing: was free: 78209024 bytes 74.6 MiB, need free: 48898796 bytes 46.6 MiB, files created: 248708, delete 93207 (37.5% of them) freespace: was free: 20582400 bytes 19.6 MiB, wrote: 34844672 bytes 33.2 MiB, delta: 14262272 bytes 13.6 MiB, wrote 69.3% more than predicted freespace: trashing: was free: 77328384 bytes 73.7 MiB, need free: 55884337 bytes 53.3 MiB, files created: 248644, delete 68951 (27.7% of them) freespace: was free: 14368768 bytes 13.7 MiB, wrote: 28278784 bytes 27.0 MiB, delta: 13910016 bytes 13.3 MiB, wrote 96.8% more than predicted freespace: trashing: was free: 77434880 bytes 73.8 MiB, need free: 62869878 bytes 60.0 MiB, files created: 248640, delete 46767 (18.8% of them) freespace: was free: 8286208 bytes 7.9 MiB, wrote: 21811200 bytes 20.8 MiB, delta: 13524992 bytes 12.9 MiB, wrote 163.2% more than predicted freespace: trashing: was free: 77856768 bytes 74.2 MiB, need free: 69855419 bytes 66.6 MiB, files created: 248576, delete 25546 (10.3% of them) freespace: was free: 5570560 bytes 5.3 MiB, wrote: 8187904 bytes 7.8 MiB, delta: 2617344 bytes 2.5 MiB, wrote 47.0% more than predicted freespace: Test 3 finished freespace: finished successfully After the change: freespace: Test 1: fill the space we have 3 times freespace: was free: 85204992 bytes 81.3 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 11284480 bytes 10.8 MiB, wrote 13.2% more than predicted freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 12935168 bytes 12.3 MiB, wrote 15.5% more than predicted freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 12939264 bytes 12.3 MiB, wrote 15.5% more than predicted freespace: Test 1 finished freespace: Test 2: gradually lessen amount of free space and fill the FS freespace: do 10 steps, lessen free space by 7596218 bytes 7.2 MiB each time freespace: was free: 78675968 bytes 75.0 MiB, wrote: 88903680 bytes 84.8 MiB, delta: 10227712 bytes 9.8 MiB, wrote 13.0% more than predicted freespace: was free: 72015872 bytes 68.7 MiB, wrote: 81514496 bytes 77.7 MiB, delta: 9498624 bytes 9.1 MiB, wrote 13.2% more than predicted freespace: was free: 63938560 bytes 61.0 MiB, wrote: 72589312 bytes 69.2 MiB, delta: 8650752 bytes 8.2 MiB, wrote 13.5% more than predicted freespace: was free: 56127488 bytes 53.5 MiB, wrote: 63762432 bytes 60.8 MiB, delta: 7634944 bytes 7.3 MiB, wrote 13.6% more than predicted freespace: was free: 48336896 bytes 46.1 MiB, wrote: 54935552 bytes 52.4 MiB, delta: 6598656 bytes 6.3 MiB, wrote 13.7% more than predicted freespace: was free: 40587264 bytes 38.7 MiB, wrote: 46157824 bytes 44.0 MiB, delta: 5570560 bytes 5.3 MiB, wrote 13.7% more than predicted freespace: was free: 32841728 bytes 31.3 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 4542464 bytes 4.3 MiB, wrote 13.8% more than predicted freespace: was free: 25100288 bytes 23.9 MiB, wrote: 28618752 bytes 27.3 MiB, delta: 3518464 bytes 3.4 MiB, wrote 14.0% more than predicted freespace: was free: 17342464 bytes 16.5 MiB, wrote: 19841024 bytes 18.9 MiB, delta: 2498560 bytes 2.4 MiB, wrote 14.4% more than predicted freespace: was free: 9605120 bytes 9.2 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 1458176 bytes 1.4 MiB, wrote 15.2% more than predicted freespace: Test 2 finished freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS freespace: do 10 steps, lessen free space by 7606272 bytes 7.3 MiB each time freespace: trashing: was free: 83668992 bytes 79.8 MiB, need free: 7606272 bytes 7.3 MiB, files created: 248297, delete 225724 (90.9% of them) freespace: was free: 70803456 bytes 67.5 MiB, wrote: 82485248 bytes 78.7 MiB, delta: 11681792 bytes 11.1 MiB, wrote 16.5% more than predicted freespace: trashing: was free: 81080320 bytes 77.3 MiB, need free: 15212544 bytes 14.5 MiB, files created: 248711, delete 202047 (81.2% of them) freespace: was free: 59867136 bytes 57.1 MiB, wrote: 71897088 bytes 68.6 MiB, delta: 12029952 bytes 11.5 MiB, wrote 20.1% more than predicted freespace: trashing: was free: 82243584 bytes 78.4 MiB, need free: 22818816 bytes 21.8 MiB, files created: 248866, delete 179817 (72.3% of them) freespace: was free: 50905088 bytes 48.5 MiB, wrote: 63168512 bytes 60.2 MiB, delta: 12263424 bytes 11.7 MiB, wrote 24.1% more than predicted freespace: trashing: was free: 83402752 bytes 79.5 MiB, need free: 30425088 bytes 29.0 MiB, files created: 248920, delete 158114 (63.5% of them) freespace: was free: 42651648 bytes 40.7 MiB, wrote: 55406592 bytes 52.8 MiB, delta: 12754944 bytes 12.2 MiB, wrote 29.9% more than predicted freespace: trashing: was free: 84402176 bytes 80.5 MiB, need free: 38031360 bytes 36.3 MiB, files created: 248709, delete 136641 (54.9% of them) freespace: was free: 35233792 bytes 33.6 MiB, wrote: 48250880 bytes 46.0 MiB, delta: 13017088 bytes 12.4 MiB, wrote 36.9% more than predicted freespace: trashing: was free: 82530304 bytes 78.7 MiB, need free: 45637632 bytes 43.5 MiB, files created: 248778, delete 111208 (44.7% of them) freespace: was free: 27287552 bytes 26.0 MiB, wrote: 40267776 bytes 38.4 MiB, delta: 12980224 bytes 12.4 MiB, wrote 47.6% more than predicted freespace: trashing: was free: 85114880 bytes 81.2 MiB, need free: 53243904 bytes 50.8 MiB, files created: 248508, delete 93052 (37.4% of them) freespace: was free: 22437888 bytes 21.4 MiB, wrote: 35328000 bytes 33.7 MiB, delta: 12890112 bytes 12.3 MiB, wrote 57.4% more than predicted freespace: trashing: was free: 84103168 bytes 80.2 MiB, need free: 60850176 bytes 58.0 MiB, files created: 248637, delete 68743 (27.6% of them) freespace: was free: 15536128 bytes 14.8 MiB, wrote: 28319744 bytes 27.0 MiB, delta: 12783616 bytes 12.2 MiB, wrote 82.3% more than predicted freespace: trashing: was free: 84357120 bytes 80.4 MiB, need free: 68456448 bytes 65.3 MiB, files created: 248567, delete 46852 (18.8% of them) freespace: was free: 9015296 bytes 8.6 MiB, wrote: 22044672 bytes 21.0 MiB, delta: 13029376 bytes 12.4 MiB, wrote 144.5% more than predicted freespace: trashing: was free: 84942848 bytes 81.0 MiB, need free: 76062720 bytes 72.5 MiB, files created: 248636, delete 25993 (10.5% of them) freespace: was free: 6086656 bytes 5.8 MiB, wrote: 8331264 bytes 7.9 MiB, delta: 2244608 bytes 2.1 MiB, wrote 36.9% more than predicted freespace: Test 3 finished freespace: finished successfully Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ fs/ubifs/misc.h | 32 -------------------------------- fs/ubifs/ubifs.h | 1 + 3 files changed, 46 insertions(+), 32 deletions(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index 9ef630a594c..7851480a6ce 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -701,6 +701,51 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c, ubifs_release_budget(c, &req); } +/** + * ubifs_reported_space - calculate reported free space. + * @c: the UBIFS file-system description object + * @free: amount of free space + * + * This function calculates amount of free space which will be reported to + * user-space. User-space application tend to expect that if the file-system + * (e.g., via the 'statfs()' call) reports that it has N bytes available, they + * are able to write a file of size N. UBIFS attaches node headers to each data + * node and it has to write indexind nodes as well. This introduces additional + * overhead, and UBIFS it has to report sligtly less free space to meet the + * above expectetion. + * + * This function assumes free space is made up of uncompressed data nodes and + * full index nodes (one per data node, tripled because we always allow enough + * space to write the index thrice). + * + * Note, the calculation is pessimistic, which means that most of the time + * UBIFS reports less space than it actually has. + */ +long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free) +{ + int divisor, factor; + + /* + * Reported space size is @free * X, where X is UBIFS block size + * divided by UBIFS block size + all overhead one data block + * introduces. The overhead is the node header + indexing overhead. + * + * Indexing overhead is calculations are based on the following + * formula: I = N/(f - 1) + 1, where I - number of indexing nodes, N - + * number of data nodes, f - fanout. Because effective UBIFS fanout is + * twice as less than maximum fanout, we assume that each data node + * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes. + * Note, the multiplier 3 is because UBIFS reseves thrice as more space + * for the index. + */ + factor = UBIFS_BLOCK_SIZE; + divisor = UBIFS_MAX_DATA_NODE_SZ; + divisor += (c->max_idx_node_sz * 3) / ((c->fanout >> 1) - 1); + free *= factor; + do_div(free, divisor); + return free; +} + /** * ubifs_budg_get_free_space - return amount of free space. * @c: UBIFS file-system description object diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h index 87ced4c74a6..4c12a9215d7 100644 --- a/fs/ubifs/misc.h +++ b/fs/ubifs/misc.h @@ -283,38 +283,6 @@ static inline void *ubifs_idx_key(const struct ubifs_info *c, return (void *)((struct ubifs_branch *)idx->branches)->key; } -/** - * ubifs_reported_space - calculate reported free space. - * @c: the UBIFS file-system description object - * @free: amount of free space - * - * This function calculates amount of free space which will be reported to - * user-space. User-space application tend to expect that if the file-system - * (e.g., via the 'statfs()' call) reports that it has N bytes available, they - * are able to write a file of size N. UBIFS attaches node headers to each data - * node and it has to write indexind nodes as well. This introduces additional - * overhead, and UBIFS it has to report sligtly less free space to meet the - * above expectetion. - * - * This function assumes free space is made up of uncompressed data nodes and - * full index nodes (one per data node, doubled because we always allow enough - * space to write the index twice). - * - * Note, the calculation is pessimistic, which means that most of the time - * UBIFS reports less space than it actually has. - */ -static inline long long ubifs_reported_space(const struct ubifs_info *c, - uint64_t free) -{ - int divisor, factor; - - divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3); - factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ; - do_div(free, divisor); - - return free * factor; -} - /** * ubifs_current_time - round current time to time granularity. * @inode: inode diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 7828d69ca4f..681d46e1628 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1441,6 +1441,7 @@ void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode, long long ubifs_budg_get_free_space(struct ubifs_info *c); int ubifs_calc_min_idx_lebs(struct ubifs_info *c); void ubifs_convert_page_budget(struct ubifs_info *c); +long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free); long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs); /* find.c */ From ad507653a39e0d27404291e5d813683265388a20 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 18:32:57 +0300 Subject: [PATCH 273/638] UBIFS: fix assertion The assertion was incorrect, because it did not take into account free space. This patch also amends the comments correspondingly, and cleans them up a little. Signed-off-by: Artem Bityutskiy --- fs/ubifs/find.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index adee7b5ddea..9fc55ae7b03 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -211,14 +211,8 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c, * dirty index heap, and it falls-back to LPT scanning if the heaps are empty * or do not have an LEB which satisfies the @min_space criteria. * - * Note: - * o LEBs which have less than dead watermark of dirty space are never picked - * by this function; - * - * Returns zero and the LEB properties of - * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a - * negative error code in case of other failures. The returned LEB is marked as - * "taken". + * Note, LEBs which have less than dead watermark of free + dirty space are + * never picked by this function. * * The additional @pick_free argument controls if this function has to return a * free or freeable LEB if one is present. For example, GC must to set it to %1, @@ -231,6 +225,10 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c, * * In addition @pick_free is set to %2 by the recovery process in order to * recover gc_lnum in which case an index LEB must not be returned. + * + * This function returns zero and the LEB properties of found dirty LEB in case + * of success, %-ENOSPC if no dirty LEB was found and a negative error code in + * case of other failures. The returned LEB is marked as "taken". */ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, int min_space, int pick_free) @@ -317,7 +315,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, lp = idx_lp; if (lp) { - ubifs_assert(lp->dirty >= c->dead_wm); + ubifs_assert(lp->free + lp->dirty >= c->dead_wm); goto found; } From 131130b9a1e6e523c64b34137b14f88ae1382a6a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 18:34:45 +0300 Subject: [PATCH 274/638] UBIFS: add forgotten gc_idx_lebs component We add this component at other similar places, but not in this one. Signed-off-by: Artem Bityutskiy --- fs/ubifs/find.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index 9fc55ae7b03..e045c8b5542 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -243,7 +243,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, int lebs, rsvd_idx_lebs = 0; spin_lock(&c->space_lock); - lebs = c->lst.empty_lebs; + lebs = c->lst.empty_lebs + c->idx_gc_cnt; lebs += c->freeable_cnt - c->lst.taken_empty_lebs; /* From 9bbb5726efb64e2cfed42f6eec07db80cd87e63b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Fri, 22 Aug 2008 18:23:22 +0300 Subject: [PATCH 275/638] UBIFS: introduce LEB overhead This is a preparational patch for the following statfs() report fix. Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 6 ++++++ fs/ubifs/ubifs.h | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 1018053519e..be23fd3cfd8 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -530,6 +530,12 @@ static int init_constants_early(struct ubifs_info *c) c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size); c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size); + /* + * Calculate how many bytes would be wasted at the end of LEB if it was + * fully filled with data nodes of maximum size. This is used in + * calculations when reporting free space. + */ + c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ; return 0; } diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 681d46e1628..57e58541de2 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -995,6 +995,9 @@ struct ubifs_mount_opts { * @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary * @max_inode_sz: maximum possible inode size in bytes * @max_znode_sz: size of znode in bytes + * + * @leb_overhead: how many bytes are wasted in an LEB when it is filled with + * data nodes of maximum size - used in free space reporting * @dead_wm: LEB dead space watermark * @dark_wm: LEB dark space watermark * @block_cnt: count of 4KiB blocks on the FS @@ -1226,6 +1229,8 @@ struct ubifs_info { int max_idx_node_sz; long long max_inode_sz; int max_znode_sz; + + int leb_overhead; int dead_wm; int dark_wm; int block_cnt; From 7dad181bbe58b8fe9e170da28bcd5f6ec9addd6d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 25 Aug 2008 18:58:19 +0300 Subject: [PATCH 276/638] UBIFS: improve statfs reporting even more Since free space we report in statfs is file size which should fit to the FS - change the way we calculate free space and use leb_overhead instead of dark_wm in calculations. Results of "freespace" test (120MiB volume, 16KiB LEB size, 512 bytes page size). Before the change: freespace: Test 1: fill the space we have 3 times freespace: was free: 85204992 bytes 81.3 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 11284480 bytes 10.8 MiB, wrote 13.2% more than predicted freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 12935168 bytes 12.3 MiB, wrote 15.5% more than predicted freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 12939264 bytes 12.3 MiB, wrote 15.5% more than predicted freespace: Test 1 finished freespace: Test 2: gradually lessen amount of free space and fill the FS freespace: do 10 steps, lessen free space by 7596218 bytes 7.2 MiB each time freespace: was free: 78675968 bytes 75.0 MiB, wrote: 88903680 bytes 84.8 MiB, delta: 10227712 bytes 9.8 MiB, wrote 13.0% more than predicted freespace: was free: 72015872 bytes 68.7 MiB, wrote: 81514496 bytes 77.7 MiB, delta: 9498624 bytes 9.1 MiB, wrote 13.2% more than predicted freespace: was free: 63938560 bytes 61.0 MiB, wrote: 72589312 bytes 69.2 MiB, delta: 8650752 bytes 8.2 MiB, wrote 13.5% more than predicted freespace: was free: 56127488 bytes 53.5 MiB, wrote: 63762432 bytes 60.8 MiB, delta: 7634944 bytes 7.3 MiB, wrote 13.6% more than predicted freespace: was free: 48336896 bytes 46.1 MiB, wrote: 54935552 bytes 52.4 MiB, delta: 6598656 bytes 6.3 MiB, wrote 13.7% more than predicted freespace: was free: 40587264 bytes 38.7 MiB, wrote: 46157824 bytes 44.0 MiB, delta: 5570560 bytes 5.3 MiB, wrote 13.7% more than predicted freespace: was free: 32841728 bytes 31.3 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 4542464 bytes 4.3 MiB, wrote 13.8% more than predicted freespace: was free: 25100288 bytes 23.9 MiB, wrote: 28618752 bytes 27.3 MiB, delta: 3518464 bytes 3.4 MiB, wrote 14.0% more than predicted freespace: was free: 17342464 bytes 16.5 MiB, wrote: 19841024 bytes 18.9 MiB, delta: 2498560 bytes 2.4 MiB, wrote 14.4% more than predicted freespace: was free: 9605120 bytes 9.2 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 1458176 bytes 1.4 MiB, wrote 15.2% more than predicted freespace: Test 2 finished freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS freespace: do 10 steps, lessen free space by 7606272 bytes 7.3 MiB each time freespace: trashing: was free: 83668992 bytes 79.8 MiB, need free: 7606272 bytes 7.3 MiB, files created: 248297, delete 225724 (90.9% of them) freespace: was free: 70803456 bytes 67.5 MiB, wrote: 82485248 bytes 78.7 MiB, delta: 11681792 bytes 11.1 MiB, wrote 16.5% more than predicted freespace: trashing: was free: 81080320 bytes 77.3 MiB, need free: 15212544 bytes 14.5 MiB, files created: 248711, delete 202047 (81.2% of them) freespace: was free: 59867136 bytes 57.1 MiB, wrote: 71897088 bytes 68.6 MiB, delta: 12029952 bytes 11.5 MiB, wrote 20.1% more than predicted freespace: trashing: was free: 82243584 bytes 78.4 MiB, need free: 22818816 bytes 21.8 MiB, files created: 248866, delete 179817 (72.3% of them) freespace: was free: 50905088 bytes 48.5 MiB, wrote: 63168512 bytes 60.2 MiB, delta: 12263424 bytes 11.7 MiB, wrote 24.1% more than predicted freespace: trashing: was free: 83402752 bytes 79.5 MiB, need free: 30425088 bytes 29.0 MiB, files created: 248920, delete 158114 (63.5% of them) freespace: was free: 42651648 bytes 40.7 MiB, wrote: 55406592 bytes 52.8 MiB, delta: 12754944 bytes 12.2 MiB, wrote 29.9% more than predicted freespace: trashing: was free: 84402176 bytes 80.5 MiB, need free: 38031360 bytes 36.3 MiB, files created: 248709, delete 136641 (54.9% of them) freespace: was free: 35233792 bytes 33.6 MiB, wrote: 48250880 bytes 46.0 MiB, delta: 13017088 bytes 12.4 MiB, wrote 36.9% more than predicted freespace: trashing: was free: 82530304 bytes 78.7 MiB, need free: 45637632 bytes 43.5 MiB, files created: 248778, delete 111208 (44.7% of them) freespace: was free: 27287552 bytes 26.0 MiB, wrote: 40267776 bytes 38.4 MiB, delta: 12980224 bytes 12.4 MiB, wrote 47.6% more than predicted freespace: trashing: was free: 85114880 bytes 81.2 MiB, need free: 53243904 bytes 50.8 MiB, files created: 248508, delete 93052 (37.4% of them) freespace: was free: 22437888 bytes 21.4 MiB, wrote: 35328000 bytes 33.7 MiB, delta: 12890112 bytes 12.3 MiB, wrote 57.4% more than predicted freespace: trashing: was free: 84103168 bytes 80.2 MiB, need free: 60850176 bytes 58.0 MiB, files created: 248637, delete 68743 (27.6% of them) freespace: was free: 15536128 bytes 14.8 MiB, wrote: 28319744 bytes 27.0 MiB, delta: 12783616 bytes 12.2 MiB, wrote 82.3% more than predicted freespace: trashing: was free: 84357120 bytes 80.4 MiB, need free: 68456448 bytes 65.3 MiB, files created: 248567, delete 46852 (18.8% of them) freespace: was free: 9015296 bytes 8.6 MiB, wrote: 22044672 bytes 21.0 MiB, delta: 13029376 bytes 12.4 MiB, wrote 144.5% more than predicted freespace: trashing: was free: 84942848 bytes 81.0 MiB, need free: 76062720 bytes 72.5 MiB, files created: 248636, delete 25993 (10.5% of them) freespace: was free: 6086656 bytes 5.8 MiB, wrote: 8331264 bytes 7.9 MiB, delta: 2244608 bytes 2.1 MiB, wrote 36.9% more than predicted freespace: Test 3 finished freespace: finished successfully After the change: freespace: Test 1: fill the space we have 3 times freespace: was free: 94048256 bytes 89.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 2441216 bytes 2.3 MiB, wrote 2.6% more than predicted freespace: was free: 92246016 bytes 88.0 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 4247552 bytes 4.1 MiB, wrote 4.6% more than predicted freespace: was free: 92254208 bytes 88.0 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 4235264 bytes 4.0 MiB, wrote 4.6% more than predicted freespace: Test 1 finished freespace: Test 2: gradually lessen amount of free space and fill the FS freespace: do 10 steps, lessen free space by 8386001 bytes 8.0 MiB each time freespace: was free: 86605824 bytes 82.6 MiB, wrote: 88252416 bytes 84.2 MiB, delta: 1646592 bytes 1.6 MiB, wrote 1.9% more than predicted freespace: was free: 78667776 bytes 75.0 MiB, wrote: 80715776 bytes 77.0 MiB, delta: 2048000 bytes 2.0 MiB, wrote 2.6% more than predicted freespace: was free: 69615616 bytes 66.4 MiB, wrote: 71630848 bytes 68.3 MiB, delta: 2015232 bytes 1.9 MiB, wrote 2.9% more than predicted freespace: was free: 61018112 bytes 58.2 MiB, wrote: 62783488 bytes 59.9 MiB, delta: 1765376 bytes 1.7 MiB, wrote 2.9% more than predicted freespace: was free: 52424704 bytes 50.0 MiB, wrote: 53968896 bytes 51.5 MiB, delta: 1544192 bytes 1.5 MiB, wrote 2.9% more than predicted freespace: was free: 43880448 bytes 41.8 MiB, wrote: 45199360 bytes 43.1 MiB, delta: 1318912 bytes 1.3 MiB, wrote 3.0% more than predicted freespace: was free: 35332096 bytes 33.7 MiB, wrote: 36425728 bytes 34.7 MiB, delta: 1093632 bytes 1.0 MiB, wrote 3.1% more than predicted freespace: was free: 26771456 bytes 25.5 MiB, wrote: 27643904 bytes 26.4 MiB, delta: 872448 bytes 852.0 KiB, wrote 3.3% more than predicted freespace: was free: 18231296 bytes 17.4 MiB, wrote: 18878464 bytes 18.0 MiB, delta: 647168 bytes 632.0 KiB, wrote 3.5% more than predicted freespace: was free: 9674752 bytes 9.2 MiB, wrote: 10088448 bytes 9.6 MiB, delta: 413696 bytes 404.0 KiB, wrote 4.3% more than predicted freespace: Test 2 finished freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS freespace: do 10 steps, lessen free space by 8397544 bytes 8.0 MiB each time freespace: trashing: was free: 92372992 bytes 88.1 MiB, need free: 8397552 bytes 8.0 MiB, files created: 248296, delete 225723 (90.9% of them) freespace: was free: 71909376 bytes 68.6 MiB, wrote: 82472960 bytes 78.7 MiB, delta: 10563584 bytes 10.1 MiB, wrote 14.7% more than predicted freespace: trashing: was free: 88989696 bytes 84.9 MiB, need free: 16795096 bytes 16.0 MiB, files created: 248794, delete 201838 (81.1% of them) freespace: was free: 60354560 bytes 57.6 MiB, wrote: 71782400 bytes 68.5 MiB, delta: 11427840 bytes 10.9 MiB, wrote 18.9% more than predicted freespace: trashing: was free: 90304512 bytes 86.1 MiB, need free: 25192640 bytes 24.0 MiB, files created: 248733, delete 179342 (72.1% of them) freespace: was free: 51187712 bytes 48.8 MiB, wrote: 62943232 bytes 60.0 MiB, delta: 11755520 bytes 11.2 MiB, wrote 23.0% more than predicted freespace: trashing: was free: 91209728 bytes 87.0 MiB, need free: 33590184 bytes 32.0 MiB, files created: 248779, delete 157160 (63.2% of them) freespace: was free: 42704896 bytes 40.7 MiB, wrote: 55050240 bytes 52.5 MiB, delta: 12345344 bytes 11.8 MiB, wrote 28.9% more than predicted freespace: trashing: was free: 92700672 bytes 88.4 MiB, need free: 41987728 bytes 40.0 MiB, files created: 248848, delete 136135 (54.7% of them) freespace: was free: 35250176 bytes 33.6 MiB, wrote: 48115712 bytes 45.9 MiB, delta: 12865536 bytes 12.3 MiB, wrote 36.5% more than predicted freespace: trashing: was free: 93986816 bytes 89.6 MiB, need free: 50385272 bytes 48.1 MiB, files created: 248723, delete 115385 (46.4% of them) freespace: was free: 29995008 bytes 28.6 MiB, wrote: 41582592 bytes 39.7 MiB, delta: 11587584 bytes 11.1 MiB, wrote 38.6% more than predicted freespace: trashing: was free: 91881472 bytes 87.6 MiB, need free: 58782816 bytes 56.1 MiB, files created: 248645, delete 89569 (36.0% of them) freespace: was free: 22511616 bytes 21.5 MiB, wrote: 34705408 bytes 33.1 MiB, delta: 12193792 bytes 11.6 MiB, wrote 54.2% more than predicted freespace: trashing: was free: 91774976 bytes 87.5 MiB, need free: 67180360 bytes 64.1 MiB, files created: 248580, delete 66616 (26.8% of them) freespace: was free: 16908288 bytes 16.1 MiB, wrote: 26898432 bytes 25.7 MiB, delta: 9990144 bytes 9.5 MiB, wrote 59.1% more than predicted freespace: trashing: was free: 92450816 bytes 88.2 MiB, need free: 75577904 bytes 72.1 MiB, files created: 248654, delete 45381 (18.3% of them) freespace: was free: 10170368 bytes 9.7 MiB, wrote: 19111936 bytes 18.2 MiB, delta: 8941568 bytes 8.5 MiB, wrote 87.9% more than predicted freespace: trashing: was free: 93282304 bytes 89.0 MiB, need free: 83975448 bytes 80.1 MiB, files created: 248513, delete 24794 (10.0% of them) freespace: was free: 3911680 bytes 3.7 MiB, wrote: 7872512 bytes 7.5 MiB, delta: 3960832 bytes 3.8 MiB, wrote 101.3% more than predicted freespace: Test 3 finished freespace: finished successfully Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 38 ++++++++++++++++++++++++++++++++++---- fs/ubifs/super.c | 10 +++++----- fs/ubifs/ubifs.h | 2 +- 3 files changed, 40 insertions(+), 10 deletions(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index 7851480a6ce..101d278c591 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -747,14 +747,24 @@ long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free) } /** - * ubifs_budg_get_free_space - return amount of free space. + * ubifs_get_free_space - return amount of free space. * @c: UBIFS file-system description object * - * This function returns amount of free space on the file-system. + * This function calculates amount of free space to report to user-space. + * + * Because UBIFS may introduce substantial overhead (the index, node headers, + * alighment, wastage at the end of eraseblocks, etc), it cannot report real + * amount of free flash space it has (well, because not all dirty space is + * reclamable, UBIFS does not actually know the real amount). If UBIFS did so, + * it would bread user expectetion about what free space is. Users seem to + * accustomed to assume that if the file-system reports N bytes of free space, + * they would be able to fit a file of N bytes to the FS. This almost works for + * traditional file-systems, because they have way less overhead than UBIFS. + * So, to keep users happy, UBIFS tries to take the overhead into account. */ -long long ubifs_budg_get_free_space(struct ubifs_info *c) +long long ubifs_get_free_space(struct ubifs_info *c) { - int min_idx_lebs; + int min_idx_lebs, rsvd_idx_lebs, lebs; long long available, outstanding, free; spin_lock(&c->space_lock); @@ -771,6 +781,26 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c) } available = ubifs_calc_available(c, min_idx_lebs); + + /* + * When reporting free space to user-space, UBIFS guarantees that it is + * possible to write a file of free space size. This means that for + * empty LEBs we may use more precise calculations than + * 'ubifs_calc_available()' is using. Namely, we know that in empty + * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm. + * Thus, amend the available space. + * + * Note, the calculations below are similar to what we have in + * 'do_budget_space()', so refer there for comments. + */ + if (min_idx_lebs > c->lst.idx_lebs) + rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs; + else + rsvd_idx_lebs = 0; + lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - + c->lst.taken_empty_lebs; + lebs -= rsvd_idx_lebs; + available += lebs * (c->dark_wm - c->leb_overhead); spin_unlock(&c->space_lock); if (available > outstanding) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index be23fd3cfd8..1207bd51ead 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -371,7 +371,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) struct ubifs_info *c = dentry->d_sb->s_fs_info; unsigned long long free; - free = ubifs_budg_get_free_space(c); + free = ubifs_get_free_space(c); dbg_gen("free space %lld bytes (%lld blocks)", free, free >> UBIFS_BLOCK_SHIFT); @@ -653,11 +653,11 @@ static int init_constants_late(struct ubifs_info *c) * internally because it does not make much sense for UBIFS, but it is * necessary to report something for the 'statfs()' call. * - * Subtract the LEB reserved for GC and the LEB which is reserved for - * deletions. + * Subtract the LEB reserved for GC, the LEB which is reserved for + * deletions, and assume only one journal head is available. */ - tmp64 = c->main_lebs - 2; - tmp64 *= (uint64_t)c->leb_size - c->dark_wm; + tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1; + tmp64 *= (uint64_t)c->leb_size - c->leb_overhead; tmp64 = ubifs_reported_space(c, tmp64); c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT; diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 57e58541de2..17c620b93ee 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1443,7 +1443,7 @@ void ubifs_release_ino_dirty(struct ubifs_info *c, struct inode *inode, struct ubifs_budget_req *req); void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode, struct ubifs_budget_req *req); -long long ubifs_budg_get_free_space(struct ubifs_info *c); +long long ubifs_get_free_space(struct ubifs_info *c); int ubifs_calc_min_idx_lebs(struct ubifs_info *c); void ubifs_convert_page_budget(struct ubifs_info *c); long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free); From b3385c278d3c32aec68d4900b35bc07df1b2240c Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sun, 31 Aug 2008 17:13:18 +0300 Subject: [PATCH 277/638] UBIFS: fill f_fsid UBIFS stores 16-bit UUID in the superblock, and it is a good idea to return part of it in 'f_fsid' filed of kstatfs structure. Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 1207bd51ead..0dee4042c6c 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -386,6 +386,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_files = 0; buf->f_ffree = 0; buf->f_namelen = UBIFS_MAX_NLEN; + memcpy(&buf->f_fsid, c->uuid, sizeof(__kernel_fsid_t)); return 0; } From 6c7be29810dd85b4fe75588ec536446c1579d492 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 1 Sep 2008 08:51:52 +1000 Subject: [PATCH 278/638] drm/radeon: downgrade debug message from info to debug. If this triggers its bad, however some machines seem to have been triggering it for ages and we didn't know until we added the debug. So downgrade the debug now so people don't call this a regression. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 3331f88dcfb..248ab4a7d39 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -223,7 +223,7 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries) return 0; DRM_UDELAY(1); } - DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n", + DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n", RADEON_READ(RADEON_RBBM_STATUS), RADEON_READ(R300_VAP_CNTL_STATUS)); @@ -252,7 +252,7 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv) } DRM_UDELAY(1); } - DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n", + DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n", RADEON_READ(RADEON_RBBM_STATUS), RADEON_READ(R300_VAP_CNTL_STATUS)); From 271f5a9b8f8ae0db95de72779d115c9d0b9d3cc5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 1 Sep 2008 12:32:52 +1000 Subject: [PATCH 279/638] Remove invalidate_partition call from do_md_stop. When stopping an md array, or just switching to read-only, we currently call invalidate_partition while holding the mddev lock. The main reason for this is probably to ensure all dirty buffers are flushed (invalidate_partition calls fsync_bdev). However if any dirty buffers are found, it will almost certainly cause a deadlock as starting writeout will require an update to the superblock, and performing that updates requires taking the mddev lock - which is already held. This deadlock can be demonstrated by running "reboot -f -n" with a root filesystem on md/raid, and some dirty buffers in memory. All other calls to stop an array should already happen after a flush. The normal sequence is to stop using the array (e.g. umount) which will cause __blkdev_put to call sync_blockdev. Then open the array and issue the STOP_ARRAY ioctl while the buffers are all still clean. So this invalidate_partition is normally a no-op, except for one case where it will cause a deadlock. So remove it. This patch possibly addresses the regression recored in http://bugzilla.kernel.org/show_bug.cgi?id=11460 and http://bugzilla.kernel.org/show_bug.cgi?id=11452 though it isn't yet clear how it ever worked. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 8cfadc5bd2b..4790c83d78d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3841,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) del_timer_sync(&mddev->safemode_timer); - invalidate_partition(disk, 0); - switch(mode) { case 1: /* readonly */ err = -ENXIO; From b2d2c4ceaddc3098f19637a732f74b820a81a9e7 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 1 Sep 2008 12:48:13 +1000 Subject: [PATCH 280/638] Fix problem with waiting while holding rcu read lock in md/bitmap.c A recent patch to protect the rdev list with rcu locking leaves us with a problem because we can sleep on memalloc while holding the rcu lock. The rcu lock is only needed while walking the linked list as uninteresting devices (failed or spares) can be removed at any time. So only take the rcu lock while actually walking the linked list. Take a refcount on the rdev during the time when we drop the lock and do the memalloc to start IO. When we return to the locked code, all the interesting devices on the list will not have moved, so we can simply use list_for_each_continue_rcu to pick up where we left off. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 45 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 38 insertions(+), 7 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7e65bad522c..ac89a5deaca 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -238,15 +238,47 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde } +static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev) +{ + /* Iterate the disks of an mddev, using rcu to protect access to the + * linked list, and raising the refcount of devices we return to ensure + * they don't disappear while in use. + * As devices are only added or removed when raid_disk is < 0 and + * nr_pending is 0 and In_sync is clear, the entries we return will + * still be in the same position on the list when we re-enter + * list_for_each_continue_rcu. + */ + struct list_head *pos; + rcu_read_lock(); + if (rdev == NULL) + /* start at the beginning */ + pos = &mddev->disks; + else { + /* release the previous rdev and start from there. */ + rdev_dec_pending(rdev, mddev); + pos = &rdev->same_set; + } + list_for_each_continue_rcu(pos, &mddev->disks) { + rdev = list_entry(pos, mdk_rdev_t, same_set); + if (rdev->raid_disk >= 0 && + test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags)) { + /* this is a usable devices */ + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + return rdev; + } + } + rcu_read_unlock(); + return NULL; +} + static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) { - mdk_rdev_t *rdev; + mdk_rdev_t *rdev = NULL; mddev_t *mddev = bitmap->mddev; - rcu_read_lock(); - rdev_for_each_rcu(rdev, mddev) - if (test_bit(In_sync, &rdev->flags) - && !test_bit(Faulty, &rdev->flags)) { + while ((rdev = next_active_rdev(rdev, mddev)) != NULL) { int size = PAGE_SIZE; if (page->index == bitmap->file_pages-1) size = roundup(bitmap->last_page_size, @@ -281,8 +313,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) + page->index * (PAGE_SIZE/512), size, page); - } - rcu_read_unlock(); + } if (wait) md_super_wait(mddev); From 20f5f95ded9cdab62c26efb146967a75e12533ec Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Mon, 1 Sep 2008 08:17:56 +0200 Subject: [PATCH 281/638] ALSA: hda: Distortion fix for dell_m6_core_init Added the EQ distortion fix to the dell_m6_core_init. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 7fdafcb0015..ad994fcab72 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -560,8 +560,9 @@ static struct hda_verb dell_eq_core_init[] = { }; static struct hda_verb dell_m6_core_init[] = { - /* set master volume and direct control */ - { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff}, + /* set master volume to max value without distortion + * and direct control */ + { 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec}, /* setup audio connections */ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00}, { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01}, From 6e5ea7015c62b672020ee0a7c2764942fe63fa25 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 31 Aug 2008 00:45:02 +0400 Subject: [PATCH 282/638] ALSA: ASoC: fix pxa2xx-i2s clk_get call pxa2xx-i2s: probe actual device and use it for clk_get call thus fixing error during startup hook Signed-off-by: Dmitry Baryshkov Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/pxa2xx-i2s.c | 40 +++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 8548818eea0..c796b188277 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -81,7 +82,6 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; - clk_i2s = clk_get(NULL, "I2SCLK"); if (IS_ERR(clk_i2s)) return PTR_ERR(clk_i2s); @@ -152,6 +152,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream, pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx); pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm); pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk); + BUG_ON(IS_ERR(clk_i2s)); clk_enable(clk_i2s); pxa_i2s_wait(); @@ -317,6 +318,43 @@ struct snd_soc_dai pxa_i2s_dai = { EXPORT_SYMBOL_GPL(pxa_i2s_dai); +static int pxa2xx_i2s_probe(struct platform_device *dev) +{ + clk_i2s = clk_get(&dev->dev, "I2SCLK"); + return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0; +} + +static int __devexit pxa2xx_i2s_remove(struct platform_device *dev) +{ + clk_put(clk_i2s); + clk_i2s = ERR_PTR(-ENOENT); + return 0; +} + +static struct platform_driver pxa2xx_i2s_driver = { + .probe = pxa2xx_i2s_probe, + .remove = __devexit_p(pxa2xx_i2s_remove), + + .driver = { + .name = "pxa2xx-i2s", + .owner = THIS_MODULE, + }, +}; + +static int __init pxa2xx_i2s_init(void) +{ + clk_i2s = ERR_PTR(-ENOENT); + return platform_driver_register(&pxa2xx_i2s_driver); +} + +static void __exit pxa2xx_i2s_exit(void) +{ + platform_driver_unregister(&pxa2xx_i2s_driver); +} + +module_init(pxa2xx_i2s_init); +module_exit(pxa2xx_i2s_exit); + /* Module information */ MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com"); MODULE_DESCRIPTION("pxa2xx I2S SoC Interface"); From ddef43a843f620c6742a06633739887a901ec06b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 1 Sep 2008 08:55:10 +0200 Subject: [PATCH 283/638] block: restore original behavior of /proc/partition when there's no partition /proc/partitions didn't use to write out the header if there was no partition. However, recent commit 66c64afe changed the behavior. This is nothing major but there's no reason to change user visible behavior without a good rationale. Restore the original behavior. Note that 2.6.28 has clean up changes scheduled which will replace this rather hacky implementation. Signed-off-by: Tejun Heo Cc: Greg KH Cc: Kay Sievers Signed-off-by: Jens Axboe --- block/genhd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/block/genhd.c b/block/genhd.c index d9743ff6789..e0ce23ac2ec 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -307,7 +307,7 @@ static void *part_start(struct seq_file *part, loff_t *pos) loff_t k = *pos; if (!k) - seq_puts(part, "major minor #blocks name\n\n"); + part->private = (void *)1LU; /* tell show to print header */ mutex_lock(&block_class_lock); dev = class_find_device(&block_class, NULL, &k, find_start); @@ -349,6 +349,17 @@ static int show_partition(struct seq_file *part, void *v) int n; char buf[BDEVNAME_SIZE]; + /* + * Print header if start told us to do. This is to preserve + * the original behavior of not printing header if no + * partition exists. This hackery will be removed later with + * class iteration clean up. + */ + if (part->private) { + seq_puts(part, "major minor #blocks name\n\n"); + part->private = NULL; + } + /* Don't show non-partitionable removeable devices or empty devices */ if (!get_capacity(sgp) || (sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE))) From 673d62cc5ea6fca046650f17f77985b112c62322 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 31 Aug 2008 23:39:21 +0200 Subject: [PATCH 284/638] debugobjects: fix lockdep warning Daniel J. Blueman reported: > ======================================================= > [ INFO: possible circular locking dependency detected ] > 2.6.27-rc4-224c #1 > ------------------------------------------------------- > hald/4680 is trying to acquire lock: > (&n->list_lock){++..}, at: [] add_partial+0x26/0x80 > > but task is already holding lock: > (&obj_hash[i].lock){++..}, at: [] > debug_object_free+0x5c/0x120 We fix it by moving the actual freeing to outside the lock (the lock now only protects the list). The pool lock is also promoted to irq-safe (suggested by Dan). It's necessary because free_pool is now called outside the irq disabled region. So we need to protect against an interrupt handler which calls debug_object_init(). [tglx@linutronix.de: added hlist_move_list helper to avoid looping through the list twice] Reported-by: Daniel J Blueman Signed-off-by: Vegard Nossum Signed-off-by: Thomas Gleixner --- include/linux/list.h | 13 +++++++++++++ lib/debugobjects.c | 31 +++++++++++++++++++++++-------- 2 files changed, 36 insertions(+), 8 deletions(-) diff --git a/include/linux/list.h b/include/linux/list.h index db35ef02e74..969f6e92d08 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -619,6 +619,19 @@ static inline void hlist_add_after(struct hlist_node *n, next->next->pprev = &next->next; } +/* + * Move a list from one list head to another. Fixup the pprev + * reference of the first entry if it exists. + */ +static inline void hlist_move_list(struct hlist_head *old, + struct hlist_head *new) +{ + new->first = old->first; + if (new->first) + new->first->pprev = &new->first; + old->first = NULL; +} + #define hlist_entry(ptr, type, member) container_of(ptr,type,member) #define hlist_for_each(pos, head) \ diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 45a6bde762d..e3ab374e133 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -112,6 +112,7 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b) /* * Allocate a new object. If the pool is empty, switch off the debugger. + * Must be called with interrupts disabled. */ static struct debug_obj * alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr) @@ -148,17 +149,18 @@ alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr) static void free_object(struct debug_obj *obj) { unsigned long idx = (unsigned long)(obj - obj_static_pool); + unsigned long flags; if (obj_pool_free < ODEBUG_POOL_SIZE || idx < ODEBUG_POOL_SIZE) { - spin_lock(&pool_lock); + spin_lock_irqsave(&pool_lock, flags); hlist_add_head(&obj->node, &obj_pool); obj_pool_free++; obj_pool_used--; - spin_unlock(&pool_lock); + spin_unlock_irqrestore(&pool_lock, flags); } else { - spin_lock(&pool_lock); + spin_lock_irqsave(&pool_lock, flags); obj_pool_used--; - spin_unlock(&pool_lock); + spin_unlock_irqrestore(&pool_lock, flags); kmem_cache_free(obj_cache, obj); } } @@ -171,6 +173,7 @@ static void debug_objects_oom(void) { struct debug_bucket *db = obj_hash; struct hlist_node *node, *tmp; + HLIST_HEAD(freelist); struct debug_obj *obj; unsigned long flags; int i; @@ -179,11 +182,14 @@ static void debug_objects_oom(void) for (i = 0; i < ODEBUG_HASH_SIZE; i++, db++) { spin_lock_irqsave(&db->lock, flags); - hlist_for_each_entry_safe(obj, node, tmp, &db->list, node) { + hlist_move_list(&db->list, &freelist); + spin_unlock_irqrestore(&db->lock, flags); + + /* Now free them */ + hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) { hlist_del(&obj->node); free_object(obj); } - spin_unlock_irqrestore(&db->lock, flags); } } @@ -498,8 +504,9 @@ void debug_object_free(void *addr, struct debug_obj_descr *descr) return; default: hlist_del(&obj->node); + spin_unlock_irqrestore(&db->lock, flags); free_object(obj); - break; + return; } out_unlock: spin_unlock_irqrestore(&db->lock, flags); @@ -510,6 +517,7 @@ static void __debug_check_no_obj_freed(const void *address, unsigned long size) { unsigned long flags, oaddr, saddr, eaddr, paddr, chunks; struct hlist_node *node, *tmp; + HLIST_HEAD(freelist); struct debug_obj_descr *descr; enum debug_obj_state state; struct debug_bucket *db; @@ -545,11 +553,18 @@ repeat: goto repeat; default: hlist_del(&obj->node); - free_object(obj); + hlist_add_head(&obj->node, &freelist); break; } } spin_unlock_irqrestore(&db->lock, flags); + + /* Now free them */ + hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) { + hlist_del(&obj->node); + free_object(obj); + } + if (cnt > debug_objects_maxchain) debug_objects_maxchain = cnt; } From 9e3f544d792fd2ff7e31ca4a72e5194f1491ed14 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 20 Aug 2008 15:46:24 +0200 Subject: [PATCH 285/638] avr32: Fix lockup after Java stack underflow in user mode When using the Java Extension Module hardware, a Java stack underflow or overflow trap may cause the system to enter an infinite exception loop. Although there's no kernel support for the Java hardware yet, we need to be able to recover from this situation and keep the system running. This patch adds code to detect and fixup this situation in the critical exception handler and terminate the faulting process. We may have to rethink how to handle this more gracefully when the necessary kernel support for hardware-accelerated Java is added. Reported-by: Guennadi Liakhovetski Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/asm-offsets.c | 6 ++++ arch/avr32/kernel/entry-avr32b.S | 59 ++++++++++++++++++++++++++++++-- 2 files changed, 63 insertions(+), 2 deletions(-) diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c index e4796c67a83..d6a8193a1d2 100644 --- a/arch/avr32/kernel/asm-offsets.c +++ b/arch/avr32/kernel/asm-offsets.c @@ -4,6 +4,8 @@ * to extract and format the required data. */ +#include +#include #include #include @@ -17,4 +19,8 @@ void foo(void) OFFSET(TI_rar_saved, thread_info, rar_saved); OFFSET(TI_rsr_saved, thread_info, rsr_saved); OFFSET(TI_restart_block, thread_info, restart_block); + BLANK(); + OFFSET(TSK_active_mm, task_struct, active_mm); + BLANK(); + OFFSET(MM_pgd, mm_struct, pgd); } diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 2b398cae110..33d49377b8b 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -334,9 +334,64 @@ save_full_context_ex: /* Low-level exception handlers */ handle_critical: + /* + * AT32AP700x errata: + * + * After a Java stack overflow or underflow trap, any CPU + * memory access may cause erratic behavior. This will happen + * when the four least significant bits of the JOSP system + * register contains any value between 9 and 15 (inclusive). + * + * Possible workarounds: + * - Don't use the Java Extension Module + * - Ensure that the stack overflow and underflow trap + * handlers do not do any memory access or trigger any + * exceptions before the overflow/underflow condition is + * cleared (by incrementing or decrementing the JOSP) + * - Make sure that JOSP does not contain any problematic + * value before doing any exception or interrupt + * processing. + * - Set up a critical exception handler which writes a + * known-to-be-safe value, e.g. 4, to JOSP before doing + * any further processing. + * + * We'll use the last workaround for now since we cannot + * guarantee that user space processes don't use Java mode. + * Non-well-behaving userland will be terminated with extreme + * prejudice. + */ +#ifdef CONFIG_CPU_AT32AP700X + /* + * There's a chance we can't touch memory, so temporarily + * borrow PTBR to save the stack pointer while we fix things + * up... + */ + mtsr SYSREG_PTBR, sp + mov sp, 4 + mtsr SYSREG_JOSP, sp + mfsr sp, SYSREG_PTBR + sub pc, -2 + + /* Push most of pt_regs on stack. We'll do the rest later */ sub sp, 4 - stmts --sp, r0-lr - rcall save_full_context_ex + pushm r0-r12 + + /* PTBR mirrors current_thread_info()->task->active_mm->pgd */ + get_thread_info r0 + ld.w r1, r0[TI_task] + ld.w r2, r1[TSK_active_mm] + ld.w r3, r2[MM_pgd] + mtsr SYSREG_PTBR, r3 +#else + sub sp, 4 + pushm r0-r12 +#endif + sub r0, sp, -(14 * 4) + mov r1, lr + mfsr r2, SYSREG_RAR_EX + mfsr r3, SYSREG_RSR_EX + pushm r0-r3 + mfsr r12, SYSREG_ECR mov r11, sp rcall do_critical_exception From 84c4f2f21a8e6e6d4bdfff95bf5ddc7925df4e01 Mon Sep 17 00:00:00 2001 From: Humphrey Bucknell Date: Fri, 29 Aug 2008 16:27:00 +0100 Subject: [PATCH 286/638] avr32: pm_standby low-power ram bug fix The value stored into the SDRAMC LPR register should be the current value of the register with the Self-refresh value set in the lower bit field. The bug involved only the Self-refresh value being written to the register, thus over writing any low-power ram settings. Signed-off-by: Humphrey Bucknell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pm-at32ap700x.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S index 5be4de65b20..17503b0ed6c 100644 --- a/arch/avr32/mach-at32ap/pm-at32ap700x.S +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -134,7 +134,7 @@ pm_standby: mov r11, SDRAMC_LPR_LPCB_SELF_RFR bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ sync 0 /* flush write buffer */ - st.w r12[SDRAMC_LPR], r11 /* put SDRAM in self-refresh mode */ + st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ ld.w r11, r12[SDRAMC_LPR] unmask_interrupts sleep CPU_SLEEP_FROZEN From c228c24bf1138d4757dbe20615df655815446da3 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Thu, 21 Aug 2008 08:42:16 -0400 Subject: [PATCH 287/638] nfsd: fix compound state allocation error handling Move the cstate_alloc call so that if it fails, the response is setup to encode the NFS error. The out label now means that the nfsd4_compound_state has not been allocated. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4proc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 2e51adac65d..e5b51ffafc6 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -867,11 +867,6 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, int slack_bytes; __be32 status; - status = nfserr_resource; - cstate = cstate_alloc(); - if (cstate == NULL) - goto out; - resp->xbuf = &rqstp->rq_res; resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len; resp->tagp = resp->p; @@ -890,6 +885,11 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION) goto out; + status = nfserr_resource; + cstate = cstate_alloc(); + if (cstate == NULL) + goto out; + status = nfs_ok; while (!status && resp->opcnt < args->opcnt) { op = &args->ops[resp->opcnt++]; @@ -957,9 +957,9 @@ encode_op: nfsd4_increment_op_stats(op->opnum); } + cstate_free(cstate); out: nfsd4_release_compoundargs(args); - cstate_free(cstate); dprintk("nfsv4 compound returned %d\n", ntohl(status)); return status; } From 27df6f25ff218072e0e879a96beeb398a79cdbc8 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 31 Aug 2008 19:25:49 +0400 Subject: [PATCH 288/638] sunrpc: fix possible overrun on read of /proc/sys/sunrpc/transports Vegard Nossum reported ---------------------- > I noticed that something weird is going on with /proc/sys/sunrpc/transports. > This file is generated in net/sunrpc/sysctl.c, function proc_do_xprt(). When > I "cat" this file, I get the expected output: > $ cat /proc/sys/sunrpc/transports > tcp 1048576 > udp 32768 > But I think that it does not check the length of the buffer supplied by > userspace to read(). With my original program, I found that the stack was > being overwritten by the characters above, even when the length given to > read() was just 1. David Wagner added (among other things) that copy_to_user could be probably used here. Ingo Oeser suggested to use simple_read_from_buffer() here. The conclusion is that proc_do_xprt doesn't check for userside buffer size indeed so fix this by using Ingo's suggestion. Reported-by: Vegard Nossum Signed-off-by: Cyrill Gorcunov CC: Ingo Oeser Cc: Neil Brown Cc: Chuck Lever Cc: Greg Banks Cc: Tom Tucker Signed-off-by: J. Bruce Fields --- net/sunrpc/sysctl.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c index 0f8c439b848..5231f7aaac0 100644 --- a/net/sunrpc/sysctl.c +++ b/net/sunrpc/sysctl.c @@ -60,24 +60,14 @@ static int proc_do_xprt(ctl_table *table, int write, struct file *file, void __user *buffer, size_t *lenp, loff_t *ppos) { char tmpbuf[256]; - int len; + size_t len; + if ((*ppos && !write) || !*lenp) { *lenp = 0; return 0; } - if (write) - return -EINVAL; - else { - len = svc_print_xprts(tmpbuf, sizeof(tmpbuf)); - if (!access_ok(VERIFY_WRITE, buffer, len)) - return -EFAULT; - - if (__copy_to_user(buffer, tmpbuf, len)) - return -EFAULT; - } - *lenp -= len; - *ppos += len; - return 0; + len = svc_print_xprts(tmpbuf, sizeof(tmpbuf)); + return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len); } static int From 91b80969ba466ba4b915a4a1d03add8c297add3f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 29 Aug 2008 19:18:45 -0400 Subject: [PATCH 289/638] nfsd: fix buffer overrun decoding NFSv4 acl The array we kmalloc() here is not large enough. Thanks to Johann Dahm and David Richter for bug report and testing. Signed-off-by: J. Bruce Fields Cc: David Richter Tested-by: Johann Dahm --- fs/nfsd/nfs4acl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c index b6ed38380ab..54b8b4140c8 100644 --- a/fs/nfsd/nfs4acl.c +++ b/fs/nfsd/nfs4acl.c @@ -443,7 +443,7 @@ init_state(struct posix_acl_state *state, int cnt) * enough space for either: */ alloc = sizeof(struct posix_ace_state_array) - + cnt*sizeof(struct posix_ace_state); + + cnt*sizeof(struct posix_user_ace_state); state->users = kzalloc(alloc, GFP_KERNEL); if (!state->users) return -ENOMEM; From c4bacefb7aaf49da11a695f29d85d40909f17693 Mon Sep 17 00:00:00 2001 From: Cordelia Date: Mon, 18 Aug 2008 09:45:51 -0700 Subject: [PATCH 290/638] [PATCH] audit: Moved variable declaration to beginning of function got rid of compilation warning: ISO C90 forbids mixed declarations and code Signed-off-by: Cordelia Sam Signed-off-by: Al Viro --- kernel/auditsc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 972f8e61d36..59cedfb040e 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -243,10 +243,11 @@ static inline int open_arg(int flags, int mask) static int audit_match_perm(struct audit_context *ctx, int mask) { + unsigned n; if (unlikely(!ctx)) return 0; - unsigned n = ctx->major; + n = ctx->major; switch (audit_classify_syscall(ctx->arch, n)) { case 0: /* native */ if ((mask & AUDIT_PERM_WRITE) && From a9b0623357d2faa49a0f862154ba36c42c4bad2b Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 2 Sep 2008 10:19:29 +0200 Subject: [PATCH 291/638] pcm037: add rts/cts support for serial port We have rts/cts pins on the first serial port on the pcm037. Enable it. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c index 0a152ed15a8..df8582a6231 100644 --- a/arch/arm/mach-mx3/pcm037.c +++ b/arch/arm/mach-mx3/pcm037.c @@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = { }; static struct imxuart_platform_data uart_pdata = { - .flags = 0, + .flags = IMXUART_HAVE_RTSCTS, }; static struct platform_device *devices[] __initdata = { From c45e7d7be891fe94e13d0e7aeee3e0e4ee7118f4 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Tue, 2 Sep 2008 10:19:29 +0200 Subject: [PATCH 292/638] i.MX serial: fix init failure Adds extra "out" label to probe function after calling .init form platform data. Because .init can return error number caused by gpio request fail. Signed-off-by: Darius Augulis Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6a29f9330a7..20189c447e9 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1133,13 +1133,19 @@ static int serial_imx_probe(struct platform_device *pdev) if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; - if (pdata->init) - pdata->init(pdev); + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } uart_add_one_port(&imx_reg, &sport->port); platform_set_drvdata(pdev, &sport->port); return 0; +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: From 4411805b13d4b8c31870b276c2730d585b062db7 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 12:10:34 +0200 Subject: [PATCH 293/638] imx serial: set RXD mux bit on i.MX27 and i.MX31 RX in i.MX27 and i.MX31 UART lines does not work unless the "RXD Muxed Input Select" bit is set on i.MX27 and i.MX31 processors. This patch sets the missing RXD mux bit in the UCR3 register. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 20189c447e9..312653e2f71 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -127,8 +127,13 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#ifdef CONFIG_ARCH_IMX +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#endif +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 +#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#endif #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ @@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port) temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 + temp = readl(sport->port.membase + UCR3); + temp |= UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); +#endif + /* * Enable modem status interrupts */ From 9fbe604456c5ae21768f1c98379e1b81c72adcd3 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 28 Jul 2008 21:26:01 +0200 Subject: [PATCH 294/638] imx serial: fix rts handling for non imx1 based hardware The interrupt handler for muxed interrupts (imx2/imx3) was calling the rts handling subroutine if the RTSS bit was set. (Which indicates the status of the RTS line), leading to an interrupt flood on RTS bit low. This patch fixes the problem by looking at the RTSD bit instead, indicating a change in the RTS line. Signed-off-by: Marc Kleine-Budde Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 312653e2f71..3f90f1bbbbc 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -450,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) imx_txint(irq, dev_id); - if (sts & USR1_RTSS) + if (sts & USR1_RTSD) imx_rtsint(irq, dev_id); return IRQ_HANDLED; From 1cede1affb3cc5a9520fdbc75b3fbaa6432cbc5a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Sep 2008 10:54:46 +0100 Subject: [PATCH 295/638] Fix modules_install on RO nfs-exported trees. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11355 by avoiding a needless rebuild of the firmware/ihex2fw tool. Signed-off-by: David Woodhouse --- firmware/Makefile | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/firmware/Makefile b/firmware/Makefile index 9fe86041f86..da75a6fbc6b 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -146,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex) +# Don't depend on ihex2fw if we're installing and it already exists. +# Putting it after | in the dependencies doesn't seem sufficient when +# we're installing after a cross-compile, because ihex2fw has dependencies +# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and +# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree +# is exported read-only for someone to run 'make install'. +ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) +ihex2fw_dep := +else +ihex2fw_dep := $(obj)/ihex2fw +endif + # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records () -$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. -$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %) +$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %) $(call cmd,h16tofw) $(firmware-dirs): From 0ed97ee470c36e05bcaad36c4fb4c501f383ce63 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 1 Sep 2008 11:10:28 +0100 Subject: [PATCH 296/638] Remove '#include ' from mm/page_isolation.c Signed-off-by: David Woodhouse --- mm/page_isolation.c | 1 - 1 file changed, 1 deletion(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index 3444b58033c..c69f84fe038 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -2,7 +2,6 @@ * linux/mm/page_isolation.c */ -#include #include #include #include From 02c0267a40c876a4d70f2000f21fe9ff89fb988e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 28 Aug 2008 01:04:30 +0300 Subject: [PATCH 297/638] dabusb_fpga_download(): fix a memory leak This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: David Woodhouse --- drivers/media/video/dabusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 48f4b92a8f8..79faedf5852 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname) ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev); if (ret) { err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret); + kfree(b); return ret; } From b67c5f87c13f398ec3f4d6b455cb0bbeda8d7ac0 Mon Sep 17 00:00:00 2001 From: Zev Weiss Date: Mon, 1 Sep 2008 05:02:12 -0700 Subject: [PATCH 298/638] [MTD] mtdchar.c: Fix regression in MEMGETREGIONINFO ioctl() The MEMGETREGIONINFO ioctl() in mtdchar.c was clobbering user memory by overwriting more than intended, due the size of struct mtd_erase_region_info changing in commit 0ecbc81adfcb9f15f86b05ff576b342ce81bbef8 ('Support for auto locking flash on power up'). Fix avoids this by copying struct members one by one with put_user(), as there is no longer a convenient struct to use the size of as the length argument to copy_to_user(). Signed-off-by: Zev Weiss Signed-off-by: David Woodhouse --- drivers/mtd/mtdchar.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index d2f331876e4..e00d424e657 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -410,16 +410,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file, case MEMGETREGIONINFO: { - struct region_info_user ur; + uint32_t ur_idx; + struct mtd_erase_region_info *kr; + struct region_info_user *ur = (struct region_info_user *) argp; - if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) + if (get_user(ur_idx, &(ur->regionindex))) return -EFAULT; - if (ur.regionindex >= mtd->numeraseregions) - return -EINVAL; - if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]), - sizeof(struct mtd_erase_region_info))) + kr = &(mtd->eraseregions[ur_idx]); + + if (put_user(kr->offset, &(ur->offset)) + || put_user(kr->erasesize, &(ur->erasesize)) + || put_user(kr->numblocks, &(ur->numblocks))) return -EFAULT; + break; } From 24fb9173815045ab3f85a670d7df8af5af6ff3be Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 2 Sep 2008 14:48:20 +0200 Subject: [PATCH 299/638] ALSA: hda - Fix ALC663 auto-probe Fix the wrong DAC assignment for NID 0x17 mono-pin on ALC663. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d6ec9eef291..635748b122e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14066,6 +14066,13 @@ static struct hda_verb alc662_auto_init_verbs[] = { { } }; +/* additional verbs for ALC663 */ +static struct hda_verb alc663_auto_init_verbs[] = { + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + { } +}; + static struct hda_verb alc663_m51va_init_verbs[] = { {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, @@ -14594,6 +14601,14 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin, if (!pin) return 0; + if (pin == 0x17) { + /* ALC663 has a mono output pin on 0x17 */ + sprintf(name, "%s Playback Switch", pfx); + err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, + HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT)); + return err; + } + if (alc880_is_fixed_pin(pin)) { nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin)); /* printk("DAC nid=%x\n",nid); */ @@ -14764,6 +14779,9 @@ static int alc662_parse_auto_config(struct hda_codec *codec) spec->input_mux = &spec->private_imux; spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs; + if (codec->vendor_id == 0x10ec0663) + spec->init_verbs[spec->num_init_verbs++] = + alc663_auto_init_verbs; spec->mixers[spec->num_mixers] = alc662_capture_mixer; spec->num_mixers++; return 1; From ee979a143cfd999adea8a9e272649a3cd9ec84bc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 2 Sep 2008 15:42:20 +0200 Subject: [PATCH 300/638] ALSA: hda - Add mic-boost controls to ALC662/663 auto configuration Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 635748b122e..66025161bd6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -14782,6 +14782,11 @@ static int alc662_parse_auto_config(struct hda_codec *codec) if (codec->vendor_id == 0x10ec0663) spec->init_verbs[spec->num_init_verbs++] = alc663_auto_init_verbs; + + err = alc_auto_add_mic_boost(codec); + if (err < 0) + return err; + spec->mixers[spec->num_mixers] = alc662_capture_mixer; spec->num_mixers++; return 1; From 011fec7486028977e2b4012afb84235759c6ad82 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 2 Sep 2008 10:38:28 -0700 Subject: [PATCH 301/638] Un-break printk strings in x86 PCI probing code Breaking lines due to some imaginary problem with a long line length is often stupid and wrong, but never more so when it splits a string that is printed out into multiple lines. This really ended up making it much harder to find where some error strings were printed out, because a simple 'grep' didn't work. I'm sure there is tons more of this particular idiocy hiding in other places, but this particular case hit me once more last week. So fix it. Signed-off-by: Linus Torvalds --- arch/x86/pci/i386.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index 5807d1bc73f..8791fc55e71 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -128,8 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) pr = pci_find_parent_resource(dev, r); if (!r->start || !pr || request_resource(pr, r) < 0) { - dev_err(&dev->dev, "BAR %d: can't " - "allocate resource\n", idx); + dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -164,15 +163,13 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - dev_dbg(&dev->dev, "resource %#08llx-%#08llx " - "(f=%lx, d=%d, p=%d)\n", + dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n", (unsigned long long) r->start, (unsigned long long) r->end, r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - dev_err(&dev->dev, "BAR %d: can't " - "allocate resource\n", idx); + dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; From 6781f4ae30bbb8ebf31187b3c9304be16966f5a0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 31 Aug 2008 20:31:55 -0700 Subject: [PATCH 302/638] kernel/resource.c: fix new kernel-doc warning Fix kernel-doc warning for new function: Warning(linux-2.6.27-rc5-git2//kernel/resource.c:448): No description found for parameter 'root' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- kernel/resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/resource.c b/kernel/resource.c index cf0a178c751..03d796c1b2e 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -438,7 +438,7 @@ int insert_resource(struct resource *parent, struct resource *new) /** * insert_resource_expand_to_fit - Insert a resource into the resource tree - * @parent: parent of the new resource + * @root: root resource descriptor * @new: new resource to insert * * Insert a resource into the resource tree, possibly expanding it in order From cbaed698f37494b30b2449b51c728ae48630cb2b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sat, 30 Aug 2008 21:08:40 +0400 Subject: [PATCH 303/638] softlockup: minor cleanup, don't check task->state twice The recent commit 16d9679f33caf7e683471647d1472bfe133d858 changed check_hung_task() to filter out the TASK_KILLABLE tasks. We can move this check to the caller which has to test t->state anyway. Signed-off-by: Oleg Nesterov Acked-by: Andi Kleen Signed-off-by: Linus Torvalds --- kernel/softlockup.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 1a07f8ca4b9..cb838ee93a8 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -180,10 +180,6 @@ static void check_hung_task(struct task_struct *t, unsigned long now) if (t->flags & PF_FROZEN) return; - /* Don't check for tasks waiting on network file systems like NFS */ - if (t->state & TASK_KILLABLE) - return; - if (switch_count != t->last_switch_count || !t->last_switch_timestamp) { t->last_switch_count = switch_count; t->last_switch_timestamp = now; @@ -237,7 +233,8 @@ static void check_hung_uninterruptible_tasks(int this_cpu) do_each_thread(g, t) { if (!--max_count) goto unlock; - if (t->state & TASK_UNINTERRUPTIBLE) + /* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */ + if (t->state == TASK_UNINTERRUPTIBLE) check_hung_task(t, now); } while_each_thread(g, t); unlock: From 2ecbf813d5e6361eb7c7520a6f5e6afa168df39a Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 2 Sep 2008 03:43:27 +1000 Subject: [PATCH 304/638] fix typo in arch/parisc/hpux/fs.c A parisc allmodconfig build produces this: arch/parisc/hpux/fs.c:107: error: 'buffer' undeclared (first use in this function) Introduced by commit da574983de9f9283ba35662c8723627096e160de ("[PATCH] fix hpux_getdents()"). Helge Dille also reported this in bugzilla 11461: http://bugzilla.kernel.org/show_bug.cgi?id=11461 and he posted an identical patch. Signed-off-by: Stephen Rothwell Signed-off-by: Helge Deller Signed-off-by: Linus Torvalds --- arch/parisc/hpux/fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c index 69ff671498e..12c04c5e558 100644 --- a/arch/parisc/hpux/fs.c +++ b/arch/parisc/hpux/fs.c @@ -104,7 +104,7 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset, buf->count -= reclen; return 0; Efault: - buffer->error = -EFAULT; + buf->error = -EFAULT; return -EFAULT; } From 1136cf11066a32d4ac2a476dac302858d763703d Mon Sep 17 00:00:00 2001 From: Michael Schmitz Date: Mon, 1 Sep 2008 20:27:02 +0200 Subject: [PATCH 305/638] m68k: atari_keyb_init operator precedence fix Fix operator precedence bug in atari_keyb_init, which caused a failure on CT60 Signed-off-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/atari/atakeyb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 8a2a53b3361..bb959fbab2d 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -580,13 +580,15 @@ int atari_keyb_init(void) do { /* reset IKBD ACIA */ acia.key_ctrl = ACIA_RESET | - (atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_IKBD) ? + ACIA_RHTID : 0); (void)acia.key_ctrl; (void)acia.key_data; /* reset MIDI ACIA */ acia.mid_ctrl = ACIA_RESET | - (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_MIDI) ? + ACIA_RHTID : 0); (void)acia.mid_ctrl; (void)acia.mid_data; @@ -599,7 +601,8 @@ int atari_keyb_init(void) ACIA_RHTID : ACIA_RLTID); acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | - (atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0; + ((atari_switches & ATARI_SWITCH_MIDI) ? + ACIA_RHTID : 0); /* make sure the interrupt line is up */ } while ((mfp.par_dt_reg & 0x10) == 0); From 3df8a905ed09341041a3d1c6309fdb18cc809297 Mon Sep 17 00:00:00 2001 From: Dennis Jansen Date: Fri, 15 Aug 2008 01:28:57 +0200 Subject: [PATCH 306/638] ACPI: Fix typo in "Disable MWAIT via DMI on broken Compal board" This fixes a typo in commit 2a2a64714d9c40f7705c4de1e79a5b855c7211a9 "Disable MWAIT via DMI on broken Compal board". It allows the nomwait dmi check to actually detect the Acer 5220. Signed-off-by: Dennis Jansen Tested-by: Dennis Jansen Acked-by: Zhao Yakui Signed-off-by: Linus Torvalds --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index d3f0a62efcc..ee68ac54c0d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { { set_no_mwait, "Extensa 5220", { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, {}, From 7ed77e804650b9095f862a0cfeecaa955224a73e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 1 Sep 2008 15:09:51 -0700 Subject: [PATCH 307/638] don't diff generated firmware files With the new firmware infrastructure in 2.6.27, some files are generated and shouldn't be diffed; add these 2 to the "dontdiff" file Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- Documentation/dontdiff | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 881e6dd03ae..27809357da5 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -5,6 +5,8 @@ *.css *.dvi *.eps +*.fw.gen.S +*.fw *.gif *.grep *.grp From 71fc9fcc70e6ad96215510c1dbcbade05cd95e41 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 2 Sep 2008 20:18:46 +0200 Subject: [PATCH 308/638] IDE: compile fix for sff_dma_ops The sff_dma_ops struct should be wrapped by BLK_DEV_IDEDMA_SFF instead of BLK_DEV_IDEDMA_PCI. Signed-off-by: Kevin Hilman Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index 87c12ed9695..fee4b157c53 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1111,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI int ide_pci_set_master(struct pci_dev *, const char *); unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); -extern const struct ide_dma_ops sff_dma_ops; int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else @@ -1275,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *); int ide_dma_test_irq(ide_drive_t *); extern void ide_dma_lost_irq(ide_drive_t *); extern void ide_dma_timeout(ide_drive_t *); +extern const struct ide_dma_ops sff_dma_ops; #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ #else From a1aee8622293138867e7dbd1dd214dfb34cd89d2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: [PATCH 309/638] IDE: palm_bk3710: fix compile warning for unused variable Signed-off-by: Kevin Hilman Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index f788fa5a977..581a7d1cc50 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -347,7 +347,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - struct ide_host *host; unsigned long base, rate; int i, rc; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; From 96f80219b738f84f90e449385bdede90f2910521 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: [PATCH 310/638] ide: fix hwif_to_node() hwif_to_node() incorrectly assumes that hwif->dev always belongs to a PCI device. This results in ide-cs oopsing in init_irq() after commit c56c5648a3bd15ff14c50f284b261140cd5b5472 accidentally fixed device tree registration for ide-cs. Fix it by using dev_to_node(). Thanks to Martin Michlmayr and Larry Finger for help with debugging the issue. Reported-by: Martin Michlmayr Tested-by: Martin Michlmayr Cc: Larry Finger Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index fee4b157c53..1524829f73f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1448,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id) static inline int hwif_to_node(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - return hwif->dev ? pcibus_to_node(dev->bus) : -1; + return hwif->dev ? dev_to_node(hwif->dev) : -1; } static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) From bfc2f01fc83f982344f09f491f7c18a6b9a16aa8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: [PATCH 311/638] palm_bk3710: improve IDE registration * fix device tree ... don't forget to set the parent device * let init/exit code be removed where practical Signed-off-by: David Brownell [bart: splitted it from bigger DaVinci patch, s/hw.parent/hw.dev/] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 581a7d1cc50..4fd91dcf1dc 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -343,7 +343,7 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit palm_bk3710_probe(struct platform_device *pdev) +static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; @@ -389,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; + hw.dev = &pdev->dev; hw.chipset = ide_palm3710; palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : @@ -412,13 +413,11 @@ static struct platform_driver platform_bk_driver = { .name = "palm_bk3710", .owner = THIS_MODULE, }, - .probe = palm_bk3710_probe, - .remove = NULL, }; static int __init palm_bk3710_init(void) { - return platform_driver_register(&platform_bk_driver); + return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe); } module_init(palm_bk3710_init); From ab1b67a6230648cf65b0342d9887fee890160ca8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: [PATCH 312/638] ide-disk: remove stale init_idedisk_capacity() documentation Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 68b9cf0138b..07ef88bd109 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -445,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive) } } -/* - * Compute drive->capacity, the full capacity of the drive - * Called with drive->id != NULL. - * - * To compute capacity, this uses either of - * - * 1. CHS value set by user (whatever user sets will be trusted) - * 2. LBA value from target drive (require new ATA feature) - * 3. LBA value from system BIOS (new one is OK, old one may break) - * 4. CHS value from system BIOS (traditional style) - * - * in above order (i.e., if value of higher priority is available, - * reset will be ignored). - */ static void init_idedisk_capacity(ide_drive_t *drive) { struct hd_driveid *id = drive->id; From 5a61dd9ec8c5a8e14fbccda3ab042555b692b9b2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:48 +0200 Subject: [PATCH 313/638] ide/Kconfig: mark ide-scsi as deprecated Mark ide-scsi as deprecated and remove stale/bogus documentation. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a34758d2951..fc735ab08ff 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -242,7 +242,7 @@ config BLK_DEV_IDEFLOPPY module will be called ide-floppy. config BLK_DEV_IDESCSI - tristate "SCSI emulation support" + tristate "SCSI emulation support (DEPRECATED)" depends on SCSI select IDE_ATAPI ---help--- @@ -255,20 +255,6 @@ config BLK_DEV_IDESCSI and will allow you to use a SCSI device driver instead of a native ATAPI driver. - This is useful if you have an ATAPI device for which no native - driver has been written (for example, an ATAPI PD-CD drive); - you can then use this emulation together with an appropriate SCSI - device driver. In order to do this, say Y here and to "SCSI support" - and "SCSI generic support", below. You must then provide the kernel - command line "hdx=ide-scsi" (try "man bootparam" or see the - documentation of your boot loader (lilo or loadlin) about how to - pass options to the kernel at boot time) for devices if you want the - native EIDE sub-drivers to skip over the native support, so that - this SCSI emulation can be used instead. - - Note that this option does NOT allow you to attach SCSI devices to a - box that doesn't have a SCSI host adapter installed. - If both this SCSI emulation and native ATAPI support are compiled into the kernel, the native support will be used. From d9664741e0e2216770d6e52646474d3982b8eb55 Mon Sep 17 00:00:00 2001 From: Florian Mickler Date: Tue, 2 Sep 2008 15:26:34 +0200 Subject: [PATCH 314/638] net/wireless/Kconfig: clarify the description for CONFIG_WIRELESS_EXT_SYSFS Current setup with hal and NetworkManager will fail to work without newest hal version with this config option disabled. Although this will solve itself by time, at the moment it is dishonest to say that we don't know any software that uses it, if there are many many people relying on old hal versions. Signed-off-by: Florian Mickler Signed-off-by: John W. Linville --- net/wireless/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig index ab015c62d56..833b024f8f6 100644 --- a/net/wireless/Kconfig +++ b/net/wireless/Kconfig @@ -39,4 +39,5 @@ config WIRELESS_EXT_SYSFS files in /sys/class/net/*/wireless/. The same information is available via the ioctls as well. - Say Y if you have programs using it (we don't know of any). + Say Y if you have programs using it, like old versions of + hal. From 49898852e6aa8a6de9a5bc0bab2cf305b3583bbf Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 2 Sep 2008 15:07:18 -0400 Subject: [PATCH 315/638] iwlwifi: do not use GFP_DMA in iwl_tx_queue_init GFP_DMA is not necessary for the iwlwifi hardware and it can cause allocation failures and/or invoke the OOM killer on lots of systems. For reference: https://bugzilla.redhat.com/show_bug.cgi?id=459709 Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index d82823b5c8a..ff879d46624 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -426,7 +426,7 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, continue; } - txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA); + txq->cmd[i] = kmalloc(len, GFP_KERNEL); if (!txq->cmd[i]) return -ENOMEM; } From cf88c433bf64b6f7395a39f840bec88a8c58b58b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 28 Aug 2008 17:25:04 +0800 Subject: [PATCH 316/638] iwlwifi: workaround interrupt handling no some platforms This patch adds workaround for an interrupt related hardware bug on some platforms. (Apparently these platforms boot-up w/ INTX_DISABLED set. -- JWL) Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 061ffba9c88..c0b73c4d6f4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2602,6 +2602,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) { struct iwl_priv *priv = hw->priv; int ret; + u16 pci_cmd; IWL_DEBUG_MAC80211("enter\n"); @@ -2612,6 +2613,13 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) pci_restore_state(priv->pci_dev); pci_enable_msi(priv->pci_dev); + /* enable interrupts if needed: hw bug w/a */ + pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd); + if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { + pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd); + } + ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED, DRV_NAME, priv); if (ret) { From 1d3e6c61342292140dfe1b921991ee793ec1e0ae Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Thu, 28 Aug 2008 17:25:05 +0800 Subject: [PATCH 317/638] iwlwifi: fix apm_stop (wrong bit polarity for FLAG_INIT_DONE) The patch fixes CSR_GP_CNTRL_REG_FLAG_INIT_DONE was set instead of cleared which disabled moving device to D0U state. Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 4 ++-- drivers/net/wireless/iwlwifi/iwl-5000.c | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index e2581229d8b..23fed329896 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -474,8 +474,8 @@ static void iwl4965_apm_stop(struct iwl_priv *priv) iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); udelay(10); - - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + /* clear "init complete" move adapter D0A* --> D0U state */ + iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); spin_unlock_irqrestore(&priv->lock, flags); } diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index cbc01a00eaf..d95fb42b2bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -145,7 +145,8 @@ static void iwl5000_apm_stop(struct iwl_priv *priv) udelay(10); - iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + /* clear "init complete" move adapter D0A* --> D0U state */ + iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); spin_unlock_irqrestore(&priv->lock, flags); } From f0b9f5cb4adcec9424142592ca7bf024fe6c91a9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 28 Aug 2008 17:25:10 +0800 Subject: [PATCH 318/638] iwlwifi: fix 64bit platform firmware loading This patch fixes loading firmware from memory above 32bit. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Signed-off-by: Zhu Yi Acked-by: Marcel Holtmann Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 11 ++++------- drivers/net/wireless/iwlwifi/iwl-fh.h | 1 + 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index d95fb42b2bd..b08036a9d89 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -578,14 +578,11 @@ static int iwl5000_load_section(struct iwl_priv *priv, FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL), phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK); - /* FIME: write the MSB of the phy_addr in CTRL1 - * iwl_write_direct32(priv, - IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL), - ((phy_addr & MSB_MSK) - << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count); - */ iwl_write_direct32(priv, - FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt); + FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), + (iwl_get_dma_hi_address(phy_addr) + << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt); + iwl_write_direct32(priv, FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL), 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM | diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 944642450d3..cd11c0ca299 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -287,6 +287,7 @@ #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) +#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 /** * Transmit DMA Channel Control/Status Registers (TCSR) From 667d41008eb8a0e1d495d6c0a6143b43fe587c98 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 23 Aug 2008 19:03:34 +0100 Subject: [PATCH 319/638] orinoco: Multicast to the specified addresses When multicasting the driver sets the number of group addresses using the count from the previous set multicast command. In general this means you have to set the multicast addresses twice to get the behaviour you want. If we were multicasting, and reduce the number of addresses we are multicasting to, then the driver would write uninitialised data from the stack into the group addresses to multicast to. Only write the multicast addresses we have specifically set. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 1ebcafe7ca5..36c004e1560 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1970,6 +1970,9 @@ __orinoco_set_multicast_list(struct net_device *dev) priv->promiscuous = promisc; } + /* If we're not in promiscuous mode, then we need to set the + * group address if either we want to multicast, or if we were + * multicasting and want to stop */ if (! promisc && (mc_count || priv->mc_count) ) { struct dev_mc_list *p = dev->mc_list; struct hermes_multicast mclist; @@ -1989,9 +1992,10 @@ __orinoco_set_multicast_list(struct net_device *dev) printk(KERN_WARNING "%s: Multicast list is " "longer than mc_count\n", dev->name); - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, - HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN), - &mclist); + err = hermes_write_ltv(hw, USER_BAP, + HERMES_RID_CNFGROUPADDRESSES, + HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), + &mclist); if (err) printk(KERN_ERR "%s: Error %d setting multicast list.\n", dev->name, err); From 9a52028e534b0567913a4144060e774891c00a37 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 28 Aug 2008 01:05:08 +0300 Subject: [PATCH 320/638] wireless/libertas/if_cs.c: fix memory leaks The leak in if_cs_prog_helper() is obvious. It looks a bit as if not freeing "fw" in if_cs_prog_real() was done intentionally, but I'm not seeing why it shouldn't be freed. Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Acked-by: Holger Schurig Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_cs.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 04d7a251e3f..8941919001b 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -595,7 +595,7 @@ static int if_cs_prog_helper(struct if_cs_card *card) if (ret < 0) { lbs_pr_err("can't download helper at 0x%x, ret %d\n", sent, ret); - goto done; + goto err_release; } if (count == 0) @@ -604,9 +604,8 @@ static int if_cs_prog_helper(struct if_cs_card *card) sent += count; } +err_release: release_firmware(fw); - ret = 0; - done: lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret); return ret; @@ -676,14 +675,8 @@ static int if_cs_prog_real(struct if_cs_card *card) } ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a); - if (ret < 0) { + if (ret < 0) lbs_pr_err("firmware download failed\n"); - goto err_release; - } - - ret = 0; - goto done; - err_release: release_firmware(fw); From 2b58b209399844995ad48e421267e359e16c03db Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 28 Aug 2008 15:12:06 +0300 Subject: [PATCH 321/638] mac80211: Fix debugfs union misuse and pointer corruption debugfs union in struct ieee80211_sub_if_data is misused by including a common default_key dentry as a union member. This ends occupying the same memory area with the first dentry in other union members (structures; usually drop_unencrypted). Consequently, debugfs operations on default_key symlinks and drop_unencrypted entry are using the same dentry pointer even though they are supposed to be separate ones. This can lead to removing entries incorrectly or potentially leaving something behind since one of the dentry pointers gets lost. Fix this by moving the default_key dentry to a new struct (common_debugfs) that contains dentries (more to be added in future) that are shared by all vif types. The debugfs union must only be used for vif type-specific entries to avoid this type of pointer corruption. Signed-off-by: Jouni Malinen Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/debugfs_key.c | 6 +++--- net/mac80211/ieee80211_i.h | 4 +++- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c index 7439b63df5d..cf82acec913 100644 --- a/net/mac80211/debugfs_key.c +++ b/net/mac80211/debugfs_key.c @@ -265,7 +265,7 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata) key = sdata->default_key; if (key) { sprintf(buf, "../keys/%d", key->debugfs.cnt); - sdata->debugfs.default_key = + sdata->common_debugfs.default_key = debugfs_create_symlink("default_key", sdata->debugfsdir, buf); } else @@ -277,8 +277,8 @@ void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata) if (!sdata) return; - debugfs_remove(sdata->debugfs.default_key); - sdata->debugfs.default_key = NULL; + debugfs_remove(sdata->common_debugfs.default_key); + sdata->common_debugfs.default_key = NULL; } void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 586a9b49b0f..4498d871365 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -496,8 +496,10 @@ struct ieee80211_sub_if_data { struct { struct dentry *mode; } monitor; - struct dentry *default_key; } debugfs; + struct { + struct dentry *default_key; + } common_debugfs; #ifdef CONFIG_MAC80211_MESH struct dentry *mesh_stats_dir; From 445df54fec7c1924f44018c4db2a9613b877f10e Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 1 Sep 2008 14:47:19 +0300 Subject: [PATCH 322/638] rt2x00: Compiler warning unmasked by fix of BUILD_BUG_ON A "Set" to a sign-bit in an "&" operation causes a compiler warning. Make calculations unsigned. [ The warning was masked by the old definition of BUILD_BUG_ON() ] Also remove __builtin_constant_p from FIELD_CHECK since BUILD_BUG_ON no longer permits non-const values. Signed-off-by: Boaz Harrosh CC: Ingo Molnar CC: Rusty Russell Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00reg.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 7e88ce5651b..2ea7866abd5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -136,7 +136,7 @@ struct rt2x00_field32 { */ #define is_power_of_two(x) ( !((x) & ((x)-1)) ) #define low_bit_mask(x) ( ((x)-1) & ~(x) ) -#define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) +#define is_valid_mask(x) is_power_of_two(1LU + (x) + low_bit_mask(x)) /* * Macro's to find first set bit in a variable. @@ -173,8 +173,7 @@ struct rt2x00_field32 { * does not exceed the given typelimit. */ #define FIELD_CHECK(__mask, __type) \ - BUILD_BUG_ON(!__builtin_constant_p(__mask) || \ - !(__mask) || \ + BUILD_BUG_ON(!(__mask) || \ !is_valid_mask(__mask) || \ (__mask) != (__type)(__mask)) \ From 1b96175b7e5801a908718d8b5270a4f7d94fed28 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Mon, 1 Sep 2008 19:45:21 +0530 Subject: [PATCH 323/638] ath9k: Incorrect key used when group and pairwise ciphers are different. Updating sc_keytype multiple times when groupwise and pairwise ciphers are different results in incorrect pairwise key type assumed for TX control and normal ping fails. This works fine for cases where both groupwise and pairwise ciphers are same. Also use mac80211 provided enums for key length calculation. Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/hw.c | 8 ++++---- drivers/net/wireless/ath9k/main.c | 6 ++++-- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index a17eb130f57..6dbfed0b414 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -7285,15 +7285,15 @@ ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry, } break; case ATH9K_CIPHER_WEP: - if (k->kv_len < 40 / NBBY) { + if (k->kv_len < LEN_WEP40) { DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE, "%s: WEP key length %u too small\n", __func__, k->kv_len); return false; } - if (k->kv_len <= 40 / NBBY) + if (k->kv_len <= LEN_WEP40) keyType = AR_KEYTABLE_TYPE_40; - else if (k->kv_len <= 104 / NBBY) + else if (k->kv_len <= LEN_WEP104) keyType = AR_KEYTABLE_TYPE_104; else keyType = AR_KEYTABLE_TYPE_128; @@ -7313,7 +7313,7 @@ ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry, key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask; key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff; key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask; - if (k->kv_len <= 104 / NBBY) + if (k->kv_len <= LEN_WEP104) key4 &= 0xff; if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) { diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 2888778040e..95b33714948 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -206,7 +206,8 @@ static int ath_key_config(struct ath_softc *sc, if (!ret) return -EIO; - sc->sc_keytype = hk.kv_type; + if (mac) + sc->sc_keytype = hk.kv_type; return 0; } @@ -756,7 +757,8 @@ static int ath9k_set_key(struct ieee80211_hw *hw, key->hw_key_idx = key->keyidx; /* push IV and Michael MIC generation to stack */ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + if (key->alg == ALG_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; } break; case DISABLE_KEY: From 773b4e02be28220e9ead80a5fdb180031361439a Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Mon, 1 Sep 2008 19:58:20 +0530 Subject: [PATCH 324/638] ath9: Fix ath_rx_flush_tid() for IRQs disabled kernel warning message. This patch addresses an issue with the locking order. ath_rx_flush_tid() uses spin_lock/unlock_bh when IRQs are disabled in sta_notify by mac80211. As node clean up is still pending with ath9k and this problematic portion of the code is expected to change anyway, thinking of a proper fix may not be worthwhile. So having this interim fix helps the users to get rid of the kernel warning message. Pasted the kernel warning message for reference. kernel: ath0: No ProbeResp from current AP 00:1b:11:60:7a:3d - assume out of range kernel: ------------[ cut here ]------------ kernel: WARNING: at kernel/softirq.c:136 local_bh_enable+0x3c/0xab() kernel: Pid: 1029, comm: ath9k Not tainted 2.6.27-rc4-wt-w1fi-wl kernel: kernel: Call Trace: kernel: [] warn_on_slowpath+0x51/0x77 kernel: [] check_preempt_wakeup+0xf3/0x123 kernel: [] autoremove_wake_function+0x9/0x2e kernel: [] local_bh_enable+0x3c/0xab kernel: [] ath_rx_node_cleanup+0x38/0x6e [ath9k] kernel: [] ath_node_detach+0x3b/0xb6 [ath9k] kernel: [] ath9k_sta_notify+0x12b/0x165 [ath9k] kernel: [] queue_work+0x1d/0x49 kernel: [] add_todo+0x70/0x99 [mac80211] kernel: [] __sta_info_unlink+0x16b/0x19e [mac80211] kernel: [] sta_info_unlink+0x18/0x43 [mac80211] kernel: [] ieee80211_associated+0xaa/0x16d [mac80211] kernel: [] ieee80211_sta_work+0x4fb/0x6b4 [mac80211] kernel: [] thread_return+0x30/0xa9 kernel: [] ieee80211_sta_work+0x0/0x6b4 [mac80211] kernel: [] run_workqueue+0xb1/0x17a kernel: [] worker_thread+0xd0/0xdb kernel: [] autoremove_wake_function+0x0/0x2e kernel: [] worker_thread+0x0/0xdb kernel: [] kthread+0x47/0x75 kernel: [] schedule_tail+0x18/0x50 kernel: [] child_rip+0xa/0x11 kernel: [] kthread+0x0/0x75 kernel: [] child_rip+0x0/0x11 kernel: kernel: ---[ end trace e9bb5da661055827 ]--- Signed-off-by: Senthil Balasubramanian Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/recv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 2fe806175c0..20ddb7acdb9 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -360,8 +360,9 @@ static void ath_rx_flush_tid(struct ath_softc *sc, struct ath_arx_tid *rxtid, int drop) { struct ath_rxbuf *rxbuf; + unsigned long flag; - spin_lock_bh(&rxtid->tidlock); + spin_lock_irqsave(&rxtid->tidlock, flag); while (rxtid->baw_head != rxtid->baw_tail) { rxbuf = rxtid->rxbuf + rxtid->baw_head; if (!rxbuf->rx_wbuf) { @@ -382,7 +383,7 @@ static void ath_rx_flush_tid(struct ath_softc *sc, INCR(rxtid->baw_head, ATH_TID_MAX_BUFS); INCR(rxtid->seq_next, IEEE80211_SEQ_MAX); } - spin_unlock_bh(&rxtid->tidlock); + spin_unlock_irqrestore(&rxtid->tidlock, flag); } static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, From 9d7d74029e0f5fde3b88b39892b9b9cfdf4ea10a Mon Sep 17 00:00:00 2001 From: Julien Brunel Date: Tue, 2 Sep 2008 17:24:28 -0700 Subject: [PATCH 325/638] net/xfrm: Use an IS_ERR test rather than a NULL test In case of error, the function xfrm_bundle_create returns an ERR pointer, but never returns a NULL pointer. So a NULL test that comes after an IS_ERR test should be deleted. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @match_bad_null_test@ expression x, E; statement S1,S2; @@ x = xfrm_bundle_create(...) ... when != x = E * if (x != NULL) S1 else S2 // Signed-off-by: Julien Brunel Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 841b32a2e68..46914b79d85 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1731,8 +1731,7 @@ restart: * We can't enlist stable bundles either. */ write_unlock_bh(&policy->lock); - if (dst) - dst_free(dst); + dst_free(dst); if (pol_dead) XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD); @@ -1748,8 +1747,7 @@ restart: err = xfrm_dst_update_origin(dst, fl); if (unlikely(err)) { write_unlock_bh(&policy->lock); - if (dst) - dst_free(dst); + dst_free(dst); XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR); goto error; } From 06770843c2f0f929a6e0c758dc433902a01aabfb Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 2 Sep 2008 17:28:58 -0700 Subject: [PATCH 326/638] ipv: Re-enable IP when MTU > 68 Re-enable IP when the MTU gets back to a valid size. This patch just checks if the in_dev is NULL on a NETDEV_CHANGEMTU event and if MTU is valid (bigger than 68), then re-enable in_dev. Also a function that checks valid MTU size was created. Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 91d3d96805d..b12dae2b0b2 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1029,6 +1029,11 @@ skip: } } +static inline bool inetdev_valid_mtu(unsigned mtu) +{ + return mtu >= 68; +} + /* Called only under RTNL semaphore */ static int inetdev_event(struct notifier_block *this, unsigned long event, @@ -1048,6 +1053,10 @@ static int inetdev_event(struct notifier_block *this, unsigned long event, IN_DEV_CONF_SET(in_dev, NOXFRM, 1); IN_DEV_CONF_SET(in_dev, NOPOLICY, 1); } + } else if (event == NETDEV_CHANGEMTU) { + /* Re-enabling IP */ + if (inetdev_valid_mtu(dev->mtu)) + in_dev = inetdev_init(dev); } goto out; } @@ -1058,7 +1067,7 @@ static int inetdev_event(struct notifier_block *this, unsigned long event, dev->ip_ptr = NULL; break; case NETDEV_UP: - if (dev->mtu < 68) + if (!inetdev_valid_mtu(dev->mtu)) break; if (dev->flags & IFF_LOOPBACK) { struct in_ifaddr *ifa; @@ -1080,9 +1089,9 @@ static int inetdev_event(struct notifier_block *this, unsigned long event, ip_mc_down(in_dev); break; case NETDEV_CHANGEMTU: - if (dev->mtu >= 68) + if (inetdev_valid_mtu(dev->mtu)) break; - /* MTU falled under 68, disable IP */ + /* disable IP when MTU is not enough */ case NETDEV_UNREGISTER: inetdev_destroy(in_dev); break; From 169ccbd44eb20f5bb7e4352451eba25397e29749 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 2 Sep 2008 14:35:37 -0700 Subject: [PATCH 327/638] NTFS: update homepage Update the location of the NTFS homepage in several files. Signed-off-by: Adrian Bunk Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/ntfs.txt | 4 ++-- MAINTAINERS | 2 +- fs/ntfs/usnjrnl.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index e79ee2db183..ac2a261c5f7 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -40,7 +40,7 @@ Web site ======== There is plenty of additional information on the linux-ntfs web site -at http://linux-ntfs.sourceforge.net/ +at http://www.linux-ntfs.org/ The web site has a lot of additional information, such as a comprehensive FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS @@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 = For Win2k and later dynamic disks, you can for example use the ldminfo utility which is part of the Linux LDM tools (the latest version at the time of writing is linux-ldm-0.0.8.tar.bz2). You can download it from: - http://linux-ntfs.sourceforge.net/downloads.html + http://www.linux-ntfs.org/ Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You will find the precompiled (i386) ldminfo utility there. NOTE: You will not be diff --git a/MAINTAINERS b/MAINTAINERS index c4ca99cf80d..be83f3424f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3051,7 +3051,7 @@ P: Anton Altaparmakov M: aia21@cantab.net L: linux-ntfs-dev@lists.sourceforge.net L: linux-kernel@vger.kernel.org -W: http://linux-ntfs.sf.net/ +W: http://www.linux-ntfs.org/ T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git S: Maintained diff --git a/fs/ntfs/usnjrnl.h b/fs/ntfs/usnjrnl.h index 3a8af75351e..4087fbdac32 100644 --- a/fs/ntfs/usnjrnl.h +++ b/fs/ntfs/usnjrnl.h @@ -113,7 +113,7 @@ typedef struct { * Reason flags (32-bit). Cumulative flags describing the change(s) to the * file since it was last opened. I think the names speak for themselves but * if you disagree check out the descriptions in the Linux NTFS project NTFS - * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html + * documentation: http://www.linux-ntfs.org/ */ enum { USN_REASON_DATA_OVERWRITE = const_cpu_to_le32(0x00000001), @@ -145,7 +145,7 @@ typedef le32 USN_REASON_FLAGS; * Source info flags (32-bit). Information about the source of the change(s) * to the file. For detailed descriptions of what these mean, see the Linux * NTFS project NTFS documentation: - * http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html + * http://www.linux-ntfs.org/ */ enum { USN_SOURCE_DATA_MANAGEMENT = const_cpu_to_le32(0x00000001), From 344c790e3821dac37eb742ddd0b611a300f78b9a Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Tue, 2 Sep 2008 14:35:38 -0700 Subject: [PATCH 328/638] mm: make setup_zone_migrate_reserve() aware of overlapping nodes I have gotten to the root cause of the hugetlb badness I reported back on August 15th. My system has the following memory topology (note the overlapping node): Node 0 Memory: 0x8000000-0x44000000 Node 1 Memory: 0x0-0x8000000 0x44000000-0x80000000 setup_zone_migrate_reserve() scans the address range 0x0-0x8000000 looking for a pageblock to move onto the MIGRATE_RESERVE list. Finding no candidates, it happily continues the scan into 0x8000000-0x44000000. When a pageblock is found, the pages are moved to the MIGRATE_RESERVE list on the wrong zone. Oops. setup_zone_migrate_reserve() should skip pageblocks in overlapping nodes. Signed-off-by: Adam Litke Acked-by: Mel Gorman Cc: Dave Hansen Cc: Nishanth Aravamudan Cc: Andy Whitcroft Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index af982f7cdb2..feb791648a1 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -694,6 +694,9 @@ static int move_freepages(struct zone *zone, #endif for (page = start_page; page <= end_page;) { + /* Make sure we are not inadvertently changing nodes */ + VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone)); + if (!pfn_valid_within(page_to_pfn(page))) { page++; continue; @@ -2516,6 +2519,10 @@ static void setup_zone_migrate_reserve(struct zone *zone) continue; page = pfn_to_page(pfn); + /* Watch out for overlapping nodes */ + if (page_to_nid(page) != zone_to_nid(zone)) + continue; + /* Blocks with reserved pages will never free, skip them. */ if (PageReserved(page)) continue; From 6ccfa806a9cfbbf1cd43d5b6aa47ef2c0eb518fd Mon Sep 17 00:00:00 2001 From: Hisashi Hifumi Date: Tue, 2 Sep 2008 14:35:40 -0700 Subject: [PATCH 329/638] VFS: fix dio write returning EIO when try_to_release_page fails Dio write returns EIO when try_to_release_page fails because bh is still referenced. The patch commit 3f31fddfa26b7594b44ff2b34f9a04ba409e0f91 Author: Mingming Cao Date: Fri Jul 25 01:46:22 2008 -0700 jbd: fix race between free buffer and commit transaction was merged into 2.6.27-rc1, but I noticed that this patch is not enough to fix the race. I did fsstress test heavily to 2.6.27-rc1, and found that dio write still sometimes got EIO through this test. The patch above fixed race between freeing buffer(dio) and committing transaction(jbd) but I discovered that there is another race, freeing buffer(dio) and ext3/4_ordered_writepage. : background_writeout() ->write_cache_pages() ->ext3_ordered_writepage() walk_page_buffers() -> take a bh ref block_write_full_page() -> unlock_page : <- end_page_writeback : <- race! (dio write->try_to_release_page fails) walk_page_buffers() ->release a bh ref ext3_ordered_writepage holds bh ref and does unlock_page remaining taking a bh ref, so this causes the race and failure of try_to_release_page. To fix this race, I used the approach of falling back to buffered writes if try_to_release_page() fails on a page. [akpm@linux-foundation.org: cleanups] Signed-off-by: Hisashi Hifumi Cc: Chris Mason Cc: Jan Kara Cc: Mingming Cao Cc: Zach Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 11 +++++++++-- mm/truncate.c | 4 ++-- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index 54e96865085..876bc595d0f 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2129,13 +2129,20 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov, * After a write we want buffered reads to be sure to go to disk to get * the new data. We invalidate clean cached page from the region we're * about to write. We do this *before* the write so that we can return - * -EIO without clobbering -EIOCBQUEUED from ->direct_IO(). + * without clobbering -EIOCBQUEUED from ->direct_IO(). */ if (mapping->nrpages) { written = invalidate_inode_pages2_range(mapping, pos >> PAGE_CACHE_SHIFT, end); - if (written) + /* + * If a page can not be invalidated, return 0 to fall back + * to buffered write. + */ + if (written) { + if (written == -EBUSY) + return 0; goto out; + } } written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs); diff --git a/mm/truncate.c b/mm/truncate.c index 250505091d3..6650c1d878b 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -380,7 +380,7 @@ static int do_launder_page(struct address_space *mapping, struct page *page) * Any pages which are found to be mapped into pagetables are unmapped prior to * invalidation. * - * Returns -EIO if any pages could not be invalidated. + * Returns -EBUSY if any pages could not be invalidated. */ int invalidate_inode_pages2_range(struct address_space *mapping, pgoff_t start, pgoff_t end) @@ -440,7 +440,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping, ret2 = do_launder_page(mapping, page); if (ret2 == 0) { if (!invalidate_complete_page2(mapping, page)) - ret2 = -EIO; + ret2 = -EBUSY; } if (ret2 < 0) ret = ret2; From 39dbbb4523754df4a822c69191a848a03e556dc7 Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Tue, 2 Sep 2008 14:35:40 -0700 Subject: [PATCH 330/638] acer-wmi: remove debugfs entries upon unloading The exit function neglects to remove debugfs entries, leading to a BUG on reload. [akpm@linux-foundation.org: cleanups] Signed-off-by: Russ Dill Acked-by: Carlos Corbacho Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/acer-wmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index c6c77a505ec..d8b0d326e45 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1189,7 +1189,7 @@ static int create_debugfs(void) return 0; error_debugfs: - remove_debugfs(); + remove_debugfs(); return -ENOMEM; } @@ -1272,6 +1272,7 @@ error_platform_register: static void __exit acer_wmi_exit(void) { remove_sysfs(acer_platform_device); + remove_debugfs(); platform_device_del(acer_platform_device); platform_driver_unregister(&acer_platform_driver); From 527655835ebac8f58a8f800a10700712a4c2affd Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 2 Sep 2008 14:35:41 -0700 Subject: [PATCH 331/638] mm/bootmem: silence section mismatch warning - contig_page_data/bootmem_node_data WARNING: vmlinux.o(.data+0x1f5c0): Section mismatch in reference from the variable contig_page_data to the variable .init.data:bootmem_node_data The variable contig_page_data references the variable __initdata bootmem_node_data If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marcin Slusarz Cc: Johannes Weiner Cc: Sean MacLennan Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index feb791648a1..e293c58bea5 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4071,7 +4071,7 @@ void __init set_dma_reserve(unsigned long new_dma_reserve) } #ifndef CONFIG_NEED_MULTIPLE_NODES -struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] }; +struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] }; EXPORT_SYMBOL(contig_page_data); #endif From bd7aa4b2dafd8e653df265479d99c80747602a50 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 2 Sep 2008 14:35:43 -0700 Subject: [PATCH 332/638] MAINTAINERS: add a maintainer for the BCM5974 multitouch driver Signed-off-by: Henrik Rydberg Cc: Dmitry Torokhov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index be83f3424f3..ced3c202f8e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -419,6 +419,12 @@ L: linux-laptop@vger.kernel.org W: http://www.canb.auug.org.au/~sfr/ S: Supported +APPLE BCM5974 MULTITOUCH DRIVER +P: Henrik Rydberg +M: rydberg@euromail.se +L: linux-input@vger.kernel.org +S: Maintained + APPLE SMC DRIVER P: Nicolas Boichat M: nicolas@boichat.ch From 363f66fe06c75270b669c88e321e6b354ba0201e Mon Sep 17 00:00:00 2001 From: Will Newton Date: Tue, 2 Sep 2008 14:35:44 -0700 Subject: [PATCH 333/638] 8250: improve workaround for UARTs that don't re-assert THRE correctly Recent changes to tighten the check for UARTs that don't correctly re-assert THRE (01c194d9278efc15d4785ff205643e9c0bdcef53: "serial 8250: tighten test for using backup timer") caused problems when such a UART was opened for the second time - the bug could only successfully be detected at first initialization. For users of this version of this particular UART IP it is fatal. This patch stores the information about the bug in the bugs field of the port structure when the port is first started up so subsequent opens can check this bit even if the test for the bug fails. David Brownell: "My own exposure to this is that the UART on DaVinci hardware, which TI allegedly derived from its original 16550 logic, has periodically gone from working to unusable with the mainline 8250.c ... and back and forth a bunch. Currently it's "unusable", a regression from some previous versions. With this patch from Will, it's usable." Signed-off-by: Will Newton Acked-by: Alex Williamson Cc: Alan Cox Cc: David Brownell Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 16 ++++++++++++---- drivers/serial/8250.h | 1 + 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 342e12fb1c2..9ccc563d873 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1908,14 +1908,22 @@ static int serial8250_startup(struct uart_port *port) * kick the UART on a regular basis. */ if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + up->bugs |= UART_BUG_THRE; pr_debug("ttyS%d - using backup timer\n", port->line); - up->timer.function = serial8250_backup_timeout; - up->timer.data = (unsigned long)up; - mod_timer(&up->timer, jiffies + - poll_timeout(up->port.timeout) + HZ / 5); } } + /* + * The above check will only give an accurate result the first time + * the port is opened so this value needs to be preserved. + */ + if (up->bugs & UART_BUG_THRE) { + up->timer.function = serial8250_backup_timeout; + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + + poll_timeout(up->port.timeout) + HZ / 5); + } + /* * If the "interrupt" for this port doesn't correspond with any * hardware interrupt, we use a timer-based system. The original diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h index 78c00162b04..520260326f3 100644 --- a/drivers/serial/8250.h +++ b/drivers/serial/8250.h @@ -47,6 +47,7 @@ struct serial8250_config { #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ #define UART_BUG_NOMSR (1 << 2) /* UART has buggy MSR status bits (Au1x00) */ +#define UART_BUG_THRE (1 << 3) /* UART has buggy THRE reassertion */ #define PROBE_RSA (1 << 0) #define PROBE_ANY (~0) From e385ea63f44b475e034a78b6d8bc6bb50caf72ca Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 2 Sep 2008 14:35:46 -0700 Subject: [PATCH 334/638] mmc: at91_mci: don't use coherent dma buffers At91_mci is abusing dma_free_coherent(), which may not be called with IRQs disabled. I saw "mkfs.ext3" on an MMC card objecting voluminously as each write completed: WARNING: at arch/arm/mm/consistent.c:368 dma_free_coherent+0x2c/0x224() [] (dump_stack+0x0/0x14) from [] (warn_on_slowpath+0x4c/0x68) [] (warn_on_slowpath+0x0/0x68) from [] (dma_free_coherent+0x2c/0x224) r6:00008008 r5:ffc06000 r4:00000000 [] (dma_free_coherent+0x0/0x224) from [] (at91_mci_irq+0x374/0x420) [] (at91_mci_irq+0x0/0x420) from [] (handle_IRQ_event+0x2c/0x6c) ... This bug has been around for a LONG time. The MM warning is from late 2005, but the driver merged a year later ... so I'm puzzled why nobody noticed this before now. The fix involves noting that this buffer shouldn't be DMA-coherent; it's just used for normal DMA writes. So replace it with standard kmalloc() buffering and DMA mapping calls. This is the quickie fix. A better one would not rely on allocating large bounce buffers. (Note that dma_alloc_coherent could have failed too, but that case was ignored... kmalloc is a bit more likely to fail though.) Signed-off-by: David Brownell Acked-by: Pierre Ossman Cc: Andrew Victor Acked-by: Nicolas Ferre Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/at91_mci.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 6915f40ac8a..1f8b5b36222 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -621,12 +621,21 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) if (host->total_length < 12) host->total_length = 12; - host->buffer = dma_alloc_coherent(NULL, - host->total_length, - &host->physical_address, GFP_KERNEL); + + host->buffer = kmalloc(host->total_length, GFP_KERNEL); + if (!host->buffer) { + pr_debug("Can't alloc tx buffer\n"); + cmd->error = -ENOMEM; + mmc_request_done(host->mmc, host->request); + return; + } at91_mci_sg_to_dma(host, data); + host->physical_address = dma_map_single(NULL, + host->buffer, host->total_length, + DMA_TO_DEVICE); + pr_debug("Transmitting %d bytes\n", host->total_length); at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); @@ -694,7 +703,10 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3)); if (host->buffer) { - dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address); + dma_unmap_single(NULL, + host->physical_address, host->total_length, + DMA_TO_DEVICE); + kfree(host->buffer); host->buffer = NULL; } From add0d4dfd660e9e4fd0af3eac3cad23583c9558f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 2 Sep 2008 14:35:48 -0700 Subject: [PATCH 335/638] pid_ns: zap_pid_ns_processes: fix the ->child_reaper changing zap_pid_ns_processes() sets pid_ns->child_reaper = NULL, this is wrong. Yes, we have already killed all tasks in this namespace, and sys_wait4() doesn't see any child. But this doesn't mean ->children list is empty, we may have EXIT_DEAD tasks which are not visible to do_wait(). In that case the subsequent forget_original_parent() will crash the kernel because it will try to re-parent these tasks to the NULL reaper. Even if there are no childs, it is not good that forget_original_parent() uses reaper == NULL. Change the code to set ->child_reaper = init_pid_ns.child_reaper instead. We could use pid_ns->parent->child_reaper as well, I think this does not really matter. These EXIT_DEAD tasks are not visible to the new ->parent after re-parenting, they will silently do release_task() eventually. Note that we must change ->child_reaper, otherwise forget_original_parent() will use reaper == father, and in that case we will hit the (correct) BUG_ON(!list_empty(&father->children)). Signed-off-by: Oleg Nesterov Acked-by: Serge Hallyn Acked-by: Sukadev Bhattiprolu Acked-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/pid_namespace.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index ea567b78d1a..598f1eec982 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -179,9 +179,12 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns) rc = sys_wait4(-1, NULL, __WALL, NULL); } while (rc != -ECHILD); - - /* Child reaper for the pid namespace is going away */ - pid_ns->child_reaper = NULL; + /* + * We can not clear ->child_reaper or leave it alone. + * There may by stealth EXIT_DEAD tasks on ->children, + * forget_original_parent() must move them somewhere. + */ + pid_ns->child_reaper = init_pid_ns.child_reaper; acct_exit_ns(pid_ns); return; } From 950bbabb5a804690a0201190de5c22837f72f83f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 2 Sep 2008 14:35:49 -0700 Subject: [PATCH 336/638] pid_ns: (BUG 11391) change ->child_reaper when init->group_leader exits We don't change pid_ns->child_reaper when the main thread of the subnamespace init exits. As Robert Rex pointed out this is wrong. Yes, the re-parenting itself works correctly, but if the reparented task exits it needs ->parent->nsproxy->pid_ns in do_notify_parent(), and if the main thread is zombie its ->nsproxy was already cleared by exit_task_namespaces(). Introduce the new function, find_new_reaper(), which finds the new ->parent for the re-parenting and changes ->child_reaper if needed. Kill the now unneeded exit_child_reaper(). Also move the changing of ->child_reaper from zap_pid_ns_processes() to find_new_reaper(), this consolidates the games with ->child_reaper and makes it stable under tasklist_lock. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11391 Reported-by: Robert Rex Signed-off-by: Oleg Nesterov Acked-by: Serge Hallyn Acked-by: Pavel Emelyanov Acked-by: Sukadev Bhattiprolu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/exit.c | 78 ++++++++++++++++++------------------------ kernel/pid_namespace.c | 6 ---- 2 files changed, 34 insertions(+), 50 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index 75c64738763..25ed2ad986d 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -831,26 +831,50 @@ static void reparent_thread(struct task_struct *p, struct task_struct *father) * the child reaper process (ie "init") in our pid * space. */ +static struct task_struct *find_new_reaper(struct task_struct *father) +{ + struct pid_namespace *pid_ns = task_active_pid_ns(father); + struct task_struct *thread; + + thread = father; + while_each_thread(father, thread) { + if (thread->flags & PF_EXITING) + continue; + if (unlikely(pid_ns->child_reaper == father)) + pid_ns->child_reaper = thread; + return thread; + } + + if (unlikely(pid_ns->child_reaper == father)) { + write_unlock_irq(&tasklist_lock); + if (unlikely(pid_ns == &init_pid_ns)) + panic("Attempted to kill init!"); + + zap_pid_ns_processes(pid_ns); + write_lock_irq(&tasklist_lock); + /* + * We can not clear ->child_reaper or leave it alone. + * There may by stealth EXIT_DEAD tasks on ->children, + * forget_original_parent() must move them somewhere. + */ + pid_ns->child_reaper = init_pid_ns.child_reaper; + } + + return pid_ns->child_reaper; +} + static void forget_original_parent(struct task_struct *father) { - struct task_struct *p, *n, *reaper = father; + struct task_struct *p, *n, *reaper; LIST_HEAD(ptrace_dead); write_lock_irq(&tasklist_lock); - + reaper = find_new_reaper(father); /* * First clean up ptrace if we were using it. */ ptrace_exit(father, &ptrace_dead); - do { - reaper = next_thread(reaper); - if (reaper == father) { - reaper = task_child_reaper(father); - break; - } - } while (reaper->flags & PF_EXITING); - list_for_each_entry_safe(p, n, &father->children, sibling) { p->real_parent = reaper; if (p->parent == father) { @@ -959,39 +983,6 @@ static void check_stack_usage(void) static inline void check_stack_usage(void) {} #endif -static inline void exit_child_reaper(struct task_struct *tsk) -{ - if (likely(tsk->group_leader != task_child_reaper(tsk))) - return; - - if (tsk->nsproxy->pid_ns == &init_pid_ns) - panic("Attempted to kill init!"); - - /* - * @tsk is the last thread in the 'cgroup-init' and is exiting. - * Terminate all remaining processes in the namespace and reap them - * before exiting @tsk. - * - * Note that @tsk (last thread of cgroup-init) may not necessarily - * be the child-reaper (i.e main thread of cgroup-init) of the - * namespace i.e the child_reaper may have already exited. - * - * Even after a child_reaper exits, we let it inherit orphaned children, - * because, pid_ns->child_reaper remains valid as long as there is - * at least one living sub-thread in the cgroup init. - - * This living sub-thread of the cgroup-init will be notified when - * a child inherited by the 'child-reaper' exits (do_notify_parent() - * uses __group_send_sig_info()). Further, when reaping child processes, - * do_wait() iterates over children of all living sub threads. - - * i.e even though 'child_reaper' thread is listed as the parent of the - * orphaned children, any living sub-thread in the cgroup-init can - * perform the role of the child_reaper. - */ - zap_pid_ns_processes(tsk->nsproxy->pid_ns); -} - NORET_TYPE void do_exit(long code) { struct task_struct *tsk = current; @@ -1051,7 +1042,6 @@ NORET_TYPE void do_exit(long code) } group_dead = atomic_dec_and_test(&tsk->signal->live); if (group_dead) { - exit_child_reaper(tsk); hrtimer_cancel(&tsk->signal->real_timer); exit_itimers(tsk->signal); } diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 598f1eec982..fab8ea86fac 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -179,12 +179,6 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns) rc = sys_wait4(-1, NULL, __WALL, NULL); } while (rc != -ECHILD); - /* - * We can not clear ->child_reaper or leave it alone. - * There may by stealth EXIT_DEAD tasks on ->children, - * forget_original_parent() must move them somewhere. - */ - pid_ns->child_reaper = init_pid_ns.child_reaper; acct_exit_ns(pid_ns); return; } From 09a2910e54646f7a334702fbafa7a6129dc072e6 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 2 Sep 2008 14:35:51 -0700 Subject: [PATCH 337/638] cirrusfb: check_par fixes 1. Check if virtual resolution fits into memory. Otherwise, Linux hangs during panning. 2. When selected use all available memory to maximize yres_virtual to speed up panning (previously also xres_virtual was increased). 3. Simplify memory restriction calculations. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/cirrusfb.c | 59 ++++++++++++---------------------------- 1 file changed, 18 insertions(+), 41 deletions(-) diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index c14b2435d23..e729fb27964 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -628,27 +628,18 @@ static long cirrusfb_get_mclk(long freq, int bpp, long *div) static int cirrusfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - int nom, den; /* translyting from pixels->bytes */ - int yres, i; - static struct { int xres, yres; } modes[] = - { { 1600, 1280 }, - { 1280, 1024 }, - { 1024, 768 }, - { 800, 600 }, - { 640, 480 }, - { -1, -1 } }; + int yres; + /* memory size in pixels */ + unsigned pixels = info->screen_size * 8 / var->bits_per_pixel; switch (var->bits_per_pixel) { case 1: - nom = 4; - den = 8; + pixels /= 4; break; /* 8 pixel per byte, only 1/4th of mem usable */ case 8: case 16: case 24: case 32: - nom = var->bits_per_pixel / 8; - den = 1; break; /* 1 pixel == 1 byte */ default: printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..." @@ -658,43 +649,29 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var, return -EINVAL; } - if (var->xres * nom / den * var->yres > info->screen_size) { - printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..." - "resolution too high to fit into video memory!\n", - var->xres, var->yres, var->bits_per_pixel); - DPRINTK("EXIT - EINVAL error\n"); - return -EINVAL; - } - + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; /* use highest possible virtual resolution */ - if (var->xres_virtual == -1 && - var->yres_virtual == -1) { - printk(KERN_INFO - "cirrusfb: using maximum available virtual resolution\n"); - for (i = 0; modes[i].xres != -1; i++) { - int size = modes[i].xres * nom / den * modes[i].yres; - if (size < info->screen_size / 2) - break; - } - if (modes[i].xres == -1) { - printk(KERN_ERR "cirrusfb: could not find a virtual " - "resolution that fits into video memory!!\n"); - DPRINTK("EXIT - EINVAL error\n"); - return -EINVAL; - } - var->xres_virtual = modes[i].xres; - var->yres_virtual = modes[i].yres; + if (var->yres_virtual == -1) { + var->yres_virtual = pixels / var->xres_virtual; printk(KERN_INFO "cirrusfb: virtual resolution set to " "maximum of %dx%d\n", var->xres_virtual, var->yres_virtual); } - - if (var->xres_virtual < var->xres) - var->xres_virtual = var->xres; if (var->yres_virtual < var->yres) var->yres_virtual = var->yres; + if (var->xres_virtual * var->yres_virtual > pixels) { + printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... " + "virtual resolution too high to fit into video memory!\n", + var->xres_virtual, var->yres_virtual, + var->bits_per_pixel); + DPRINTK("EXIT - EINVAL error\n"); + return -EINVAL; + } + + if (var->xoffset < 0) var->xoffset = 0; if (var->yoffset < 0) From 36fd71d293898a59b14e49da1f6e81c1a58f2035 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 2 Sep 2008 14:35:52 -0700 Subject: [PATCH 338/638] devcgroup: fix race against rmdir() During the use of a dev_cgroup, we should guarantee the corresponding cgroup won't be deleted (i.e. via rmdir). This can be done through css_get(&dev_cgroup->css), but here we can just get and use the dev_cgroup under rcu_read_lock. And also remove checking NULL dev_cgroup, it won't be NULL since a task always belongs to a cgroup. Signed-off-by: Li Zefan Acked-by: Serge Hallyn Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- security/device_cgroup.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 7bd296cca04..46f23971f7e 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -508,12 +508,11 @@ int devcgroup_inode_permission(struct inode *inode, int mask) return 0; if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode)) return 0; - dev_cgroup = css_to_devcgroup(task_subsys_state(current, - devices_subsys_id)); - if (!dev_cgroup) - return 0; rcu_read_lock(); + + dev_cgroup = task_devcgroup(current); + list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) { if (wh->type & DEV_ALL) goto acc_check; @@ -533,6 +532,7 @@ acc_check: rcu_read_unlock(); return 0; } + rcu_read_unlock(); return -EPERM; @@ -543,12 +543,10 @@ int devcgroup_inode_mknod(int mode, dev_t dev) struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; - dev_cgroup = css_to_devcgroup(task_subsys_state(current, - devices_subsys_id)); - if (!dev_cgroup) - return 0; - rcu_read_lock(); + + dev_cgroup = task_devcgroup(current); + list_for_each_entry(wh, &dev_cgroup->whitelist, list) { if (wh->type & DEV_ALL) goto acc_check; @@ -566,6 +564,8 @@ acc_check: rcu_read_unlock(); return 0; } + rcu_read_unlock(); + return -EPERM; } From 4b8561521dbaa3d766b198496b220e984e3bf756 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 2 Sep 2008 14:35:53 -0700 Subject: [PATCH 339/638] mm: show quicklist usage in /proc/meminfo Quicklists can consume several GB of memory. We should provide a means of monitoring this. After this patch is applied, /proc/meminfo will output the following: % cat /proc/meminfo MemTotal: 7715392 kB MemFree: 5401600 kB Buffers: 80384 kB Cached: 300800 kB SwapCached: 0 kB Active: 235584 kB Inactive: 262656 kB SwapTotal: 2031488 kB SwapFree: 2031488 kB Dirty: 3520 kB Writeback: 0 kB AnonPages: 117696 kB Mapped: 38528 kB Slab: 1589952 kB SReclaimable: 23104 kB SUnreclaim: 1566848 kB PageTables: 14656 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5889152 kB Committed_AS: 393152 kB VmallocTotal: 17592177655808 kB VmallocUsed: 29056 kB VmallocChunk: 17592177626432 kB Quicklists: 130944 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 262144 kB Signed-off-by: KOSAKI Motohiro Cc: Christoph Lameter Cc: Keiichiro Tokunaga Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/proc_misc.c | 7 +++++-- include/linux/quicklist.h | 7 +++++++ 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index ded96986296..00f10a2dcf1 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -189,7 +190,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off, "Committed_AS: %8lu kB\n" "VmallocTotal: %8lu kB\n" "VmallocUsed: %8lu kB\n" - "VmallocChunk: %8lu kB\n", + "VmallocChunk: %8lu kB\n" + "Quicklists: %8lu kB\n", K(i.totalram), K(i.freeram), K(i.bufferram), @@ -221,7 +223,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off, K(committed), (unsigned long)VMALLOC_TOTAL >> 10, vmi.used >> 10, - vmi.largest_chunk >> 10 + vmi.largest_chunk >> 10, + K(quicklist_total_size()) ); len += hugetlb_report_meminfo(page + len); diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h index 39b66713a0b..bd466439c58 100644 --- a/include/linux/quicklist.h +++ b/include/linux/quicklist.h @@ -80,6 +80,13 @@ void quicklist_trim(int nr, void (*dtor)(void *), unsigned long quicklist_total_size(void); +#else + +static inline unsigned long quicklist_total_size(void) +{ + return 0; +} + #endif #endif /* LINUX_QUICKLIST_H */ From b954185214c3b562c3fcc651e9ec69d421d76bfa Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 2 Sep 2008 14:35:58 -0700 Subject: [PATCH 340/638] mm: size of quicklists shouldn't be proportional to the number of CPUs Quicklists store pages for each CPU as caches. (Each CPU can cache node_free_pages/16 pages) It is used for page table cache. exit() will increase the cache size, while fork() consumes it. So for example if an apache-style application runs (one parent and many child model), one CPU process will fork() while another CPU will process the middleware work and exit(). At that time, the CPU on which the parent runs doesn't have page table cache at all. Others (on which children runs) have maximum caches. QList_max = (#ofCPUs - 1) x Free / 16 => QList_max / (Free + QList_max) = (#ofCPUs - 1) / (16 + #ofCPUs - 1) So, How much quicklist memory is used in the maximum case? This is proposional to # of CPUs because the limit of per cpu quicklist cache doesn't see the number of cpus. Above calculation mean Number of CPUs per node 2 4 8 16 ============================== ==================== QList_max / (Free + QList_max) 5.8% 16% 30% 48% Wow! Quicklist can spend about 50% memory at worst case. My demonstration program is here -------------------------------------------------------------------------------- #define _GNU_SOURCE #include #include #include #include #include #include #include #include #define BUFFSIZE 512 int max_cpu(void) /* get max number of logical cpus from /proc/cpuinfo */ { FILE *fd; char *ret, buffer[BUFFSIZE]; int cpu = 1; fd = fopen("/proc/cpuinfo", "r"); if (fd == NULL) { perror("fopen(/proc/cpuinfo)"); exit(EXIT_FAILURE); } while (1) { ret = fgets(buffer, BUFFSIZE, fd); if (ret == NULL) break; if (!strncmp(buffer, "processor", 9)) cpu = atoi(strchr(buffer, ':') + 2); } fclose(fd); return cpu; } void cpu_bind(int cpu) /* bind current process to one cpu */ { cpu_set_t mask; int ret; CPU_ZERO(&mask); CPU_SET(cpu, &mask); ret = sched_setaffinity(0, sizeof(mask), &mask); if (ret == -1) { perror("sched_setaffinity()"); exit(EXIT_FAILURE); } sched_yield(); /* not necessary */ } #define MMAP_SIZE (10 * 1024 * 1024) /* 10 MB */ #define FORK_INTERVAL 1 /* 1 second */ main(int argc, char *argv[]) { int cpu_max, nextcpu; long pagesize; pid_t pid; /* set max number of logical cpu */ if (argc > 1) cpu_max = atoi(argv[1]) - 1; else cpu_max = max_cpu(); /* get the page size */ pagesize = sysconf(_SC_PAGESIZE); if (pagesize == -1) { perror("sysconf(_SC_PAGESIZE)"); exit(EXIT_FAILURE); } /* prepare parent process */ cpu_bind(0); nextcpu = cpu_max; loop: /* select destination cpu for child process by round-robin rule */ if (++nextcpu > cpu_max) nextcpu = 1; pid = fork(); if (pid == 0) { /* child action */ char *p; int i; /* consume page tables */ p = mmap(0, MMAP_SIZE, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0); i = MMAP_SIZE / pagesize; while (i-- > 0) { *p = 1; p += pagesize; } /* move to other cpu */ cpu_bind(nextcpu); /* printf("a child moved to cpu%d after mmap().\n", nextcpu); fflush(stdout); */ /* back page tables to pgtable_quicklist */ exit(0); } else if (pid > 0) { /* parent action */ sleep(FORK_INTERVAL); waitpid(pid, NULL, WNOHANG); } goto loop; } ---------------------------------------- When above program which does task migration runs, my 8GB box spends 800MB of memory for quicklist. This is not memory leak but doesn't seem good. % cat /proc/meminfo MemTotal: 7701568 kB MemFree: 4724672 kB (snip) Quicklists: 844800 kB because - My machine spec is number of numa node: 2 number of cpus: 8 (4CPU x2 node) total mem: 8GB (4GB x2 node) free mem: about 5GB - Then, 4.7GB x 16% ~= 880MB. So, Quicklist can use 800MB. So, if following spec machine run that program CPUs: 64 (8cpu x 8node) Mem: 1TB (128GB x8node) Then, quicklist can waste 300GB (= 1TB x 30%). It is too large. So, I don't like cache policies which is proportional to # of cpus. My patch changes the number of caches from: per-cpu-cache-amount = memory_on_node / 16 to per-cpu-cache-amount = memory_on_node / 16 / number_of_cpus_on_node. Signed-off-by: KOSAKI Motohiro Cc: Keiichiro Tokunaga Acked-by: Christoph Lameter Tested-by: David Miller Acked-by: Mike Travis Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/quicklist.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/mm/quicklist.c b/mm/quicklist.c index 3f703f7cb39..8dbb6805ef3 100644 --- a/mm/quicklist.c +++ b/mm/quicklist.c @@ -26,7 +26,10 @@ DEFINE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK]; static unsigned long max_pages(unsigned long min_pages) { unsigned long node_free_pages, max; - struct zone *zones = NODE_DATA(numa_node_id())->node_zones; + int node = numa_node_id(); + struct zone *zones = NODE_DATA(node)->node_zones; + int num_cpus_on_node; + node_to_cpumask_ptr(cpumask_on_node, node); node_free_pages = #ifdef CONFIG_ZONE_DMA @@ -38,6 +41,10 @@ static unsigned long max_pages(unsigned long min_pages) zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES); max = node_free_pages / FRACTION_OF_NODE_MEM; + + num_cpus_on_node = cpus_weight_nr(*cpumask_on_node); + max /= num_cpus_on_node; + return max(max, min_pages); } From 61e55d0576d0e7eb4fecaeb25b3618e035de5be1 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Tue, 2 Sep 2008 14:35:59 -0700 Subject: [PATCH 341/638] ipc: document the new auto_msgmni proc file Update Documentation/filesystems/proc.txt: it describes the file auto_msgmni intoduced to enable/disable msgmni automatic recomputing upon memory add/remove (see thread http://lkml.org/lkml/2008/7/4/27). Also added a description for msgmni (this filex is only listed in Documentation/sysctl/kernel.txt). Signed-off-by: Nadia Derbey Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 64557821ee5..394eb2cc1c3 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1339,6 +1339,25 @@ Enables/Disables the protection of the per-process proc entries "maps" and "smaps". When enabled, the contents of these files are visible only to readers that are allowed to ptrace() the given process. +msgmni +------ + +Maximum number of message queue ids on the system. +This value scales to the amount of lowmem. It is automatically recomputed +upon memory add/remove or ipc namespace creation/removal. +When a value is written into this file, msgmni's value becomes fixed, i.e. it +is not recomputed anymore when one of the above events occurs. +Use auto_msgmni to change this behavior. + +auto_msgmni +----------- + +Enables/Disables automatic recomputing of msgmni upon memory add/remove or +upon ipc namespace creation/removal (see the msgmni description above). +Echoing "1" into this file enables msgmni automatic recomputing. +Echoing "0" turns it off. +auto_msgmni default value is 1. + 2.4 /proc/sys/vm - The virtual memory subsystem ----------------------------------------------- From 3f6e2f137c5b83c3c2d48fae971e845c3450cc7c Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 2 Sep 2008 14:36:00 -0700 Subject: [PATCH 342/638] hp-wmi: update to match current rfkill semantics hp-wmi currently changes the RFKill state by altering the struct members rather than using the dedicated interface, meaning that update events won't be pushed to userspace. This patch fixes that, along with fixing the declared type of the WWAN kill switch. It also ensures that rfkill interfaces are only registered for hardware that exists. Signed-off-by: Matthew Garrett Acked-by: Henrique de Moraes Holschuh Cc: Ivo van Doorn Cc: Dave Young Cc: Marcel Holtmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/hp-wmi.c | 77 ++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 33 deletions(-) diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c index 1dbcbcb323a..c6c6d09b376 100644 --- a/drivers/misc/hp-wmi.c +++ b/drivers/misc/hp-wmi.c @@ -177,9 +177,9 @@ static int hp_wmi_wifi_state(void) int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x100) - return 1; + return RFKILL_STATE_UNBLOCKED; else - return 0; + return RFKILL_STATE_SOFT_BLOCKED; } static int hp_wmi_bluetooth_state(void) @@ -187,9 +187,9 @@ static int hp_wmi_bluetooth_state(void) int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x10000) - return 1; + return RFKILL_STATE_UNBLOCKED; else - return 0; + return RFKILL_STATE_SOFT_BLOCKED; } static int hp_wmi_wwan_state(void) @@ -197,9 +197,9 @@ static int hp_wmi_wwan_state(void) int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); if (wireless & 0x1000000) - return 1; + return RFKILL_STATE_UNBLOCKED; else - return 0; + return RFKILL_STATE_SOFT_BLOCKED; } static ssize_t show_display(struct device *dev, struct device_attribute *attr, @@ -338,12 +338,14 @@ void hp_wmi_notify(u32 value, void *context) } } else if (eventcode == 0x5) { if (wifi_rfkill) - wifi_rfkill->state = hp_wmi_wifi_state(); + rfkill_force_state(wifi_rfkill, + hp_wmi_wifi_state()); if (bluetooth_rfkill) - bluetooth_rfkill->state = - hp_wmi_bluetooth_state(); + rfkill_force_state(bluetooth_rfkill, + hp_wmi_bluetooth_state()); if (wwan_rfkill) - wwan_rfkill->state = hp_wmi_wwan_state(); + rfkill_force_state(wwan_rfkill, + hp_wmi_wwan_state()); } else printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n", eventcode); @@ -398,6 +400,7 @@ static void cleanup_sysfs(struct platform_device *device) static int __init hp_wmi_bios_setup(struct platform_device *device) { int err; + int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0); err = device_create_file(&device->dev, &dev_attr_display); if (err) @@ -412,28 +415,33 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) if (err) goto add_sysfs_error; - wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); - wifi_rfkill->name = "hp-wifi"; - wifi_rfkill->state = hp_wmi_wifi_state(); - wifi_rfkill->toggle_radio = hp_wmi_wifi_set; - wifi_rfkill->user_claim_unsupported = 1; + if (wireless & 0x1) { + wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); + wifi_rfkill->name = "hp-wifi"; + wifi_rfkill->state = hp_wmi_wifi_state(); + wifi_rfkill->toggle_radio = hp_wmi_wifi_set; + wifi_rfkill->user_claim_unsupported = 1; + rfkill_register(wifi_rfkill); + } - bluetooth_rfkill = rfkill_allocate(&device->dev, - RFKILL_TYPE_BLUETOOTH); - bluetooth_rfkill->name = "hp-bluetooth"; - bluetooth_rfkill->state = hp_wmi_bluetooth_state(); - bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; - bluetooth_rfkill->user_claim_unsupported = 1; + if (wireless & 0x2) { + bluetooth_rfkill = rfkill_allocate(&device->dev, + RFKILL_TYPE_BLUETOOTH); + bluetooth_rfkill->name = "hp-bluetooth"; + bluetooth_rfkill->state = hp_wmi_bluetooth_state(); + bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; + bluetooth_rfkill->user_claim_unsupported = 1; + rfkill_register(bluetooth_rfkill); + } - wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX); - wwan_rfkill->name = "hp-wwan"; - wwan_rfkill->state = hp_wmi_wwan_state(); - wwan_rfkill->toggle_radio = hp_wmi_wwan_set; - wwan_rfkill->user_claim_unsupported = 1; - - rfkill_register(wifi_rfkill); - rfkill_register(bluetooth_rfkill); - rfkill_register(wwan_rfkill); + if (wireless & 0x4) { + wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN); + wwan_rfkill->name = "hp-wwan"; + wwan_rfkill->state = hp_wmi_wwan_state(); + wwan_rfkill->toggle_radio = hp_wmi_wwan_set; + wwan_rfkill->user_claim_unsupported = 1; + rfkill_register(wwan_rfkill); + } return 0; add_sysfs_error: @@ -445,9 +453,12 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device) { cleanup_sysfs(device); - rfkill_unregister(wifi_rfkill); - rfkill_unregister(bluetooth_rfkill); - rfkill_unregister(wwan_rfkill); + if (wifi_rfkill) + rfkill_unregister(wifi_rfkill); + if (bluetooth_rfkill) + rfkill_unregister(bluetooth_rfkill); + if (wwan_rfkill) + rfkill_unregister(wwan_rfkill); return 0; } From a8823aefd142d2a9c4b3661bf8712ccd2da1b220 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 2 Sep 2008 14:36:03 -0700 Subject: [PATCH 343/638] hp-wmi: add proper hotkey support It turns out that event 0x4 merely indcates that a hotkey has been pressed, not which one. A further query is required in order to determine the actual keypress. The following patch adds support for that along with the known keycodes. Signed-off-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/hp-wmi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c index c6c6d09b376..6d407c2a4f9 100644 --- a/drivers/misc/hp-wmi.c +++ b/drivers/misc/hp-wmi.c @@ -49,6 +49,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4"); #define HPWMI_ALS_QUERY 0x3 #define HPWMI_DOCK_QUERY 0x4 #define HPWMI_WIRELESS_QUERY 0x5 +#define HPWMI_HOTKEY_QUERY 0xc static int __init hp_wmi_bios_setup(struct platform_device *device); static int __exit hp_wmi_bios_remove(struct platform_device *device); @@ -69,7 +70,7 @@ struct bios_return { struct key_entry { char type; /* See KE_* below */ - u8 code; + u16 code; u16 keycode; }; @@ -79,7 +80,9 @@ static struct key_entry hp_wmi_keymap[] = { {KE_SW, 0x01, SW_DOCK}, {KE_KEY, 0x02, KEY_BRIGHTNESSUP}, {KE_KEY, 0x03, KEY_BRIGHTNESSDOWN}, - {KE_KEY, 0x04, KEY_HELP}, + {KE_KEY, 0x20e6, KEY_PROG1}, + {KE_KEY, 0x2142, KEY_MEDIA}, + {KE_KEY, 0x231b, KEY_HELP}, {KE_END, 0} }; @@ -318,6 +321,9 @@ void hp_wmi_notify(u32 value, void *context) if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) { int eventcode = *((u8 *) obj->buffer.pointer); + if (eventcode == 0x4) + eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0, + 0); key = hp_wmi_get_entry_by_scancode(eventcode); if (key) { switch (key->type) { From bf6910c0afb1e416a99ad5b2296e088449fbe481 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 2 Sep 2008 14:36:03 -0700 Subject: [PATCH 344/638] tdfxfb: fix SDRAM memory size detection Fix memory detection on Voodoo3 cards with SDRAM memory. Signed-off-by: Krzysztof Helt Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/tdfxfb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index 77aafcfae03..fa7cbecbe82 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -426,7 +426,7 @@ static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id) if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) { /* Banshee/Voodoo3 */ chip_size = 2; - if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE)) + if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE)) chip_size = 1; } else { /* Voodoo4/5 */ From b4a49b12e879ce79f495cc318c4b33caec6922e8 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Tue, 2 Sep 2008 14:36:04 -0700 Subject: [PATCH 345/638] tdfxfb: fix frame buffer name overrun If there are more then one graphics card handled by the tdfxfb driver the name of the frame buffer overruns reserved size. Signed-off-by: Krzysztof Helt Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/tdfxfb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c index fa7cbecbe82..4599a4385bc 100644 --- a/drivers/video/tdfxfb.c +++ b/drivers/video/tdfxfb.c @@ -95,7 +95,6 @@ static inline int mtrr_del(int reg, unsigned long base, #define VOODOO5_MAX_PIXCLOCK 350000 static struct fb_fix_screeninfo tdfx_fix __devinitdata = { - .id = "3Dfx", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .ypanstep = 1, @@ -1200,15 +1199,15 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev, /* Configure the default fb_fix_screeninfo first */ switch (pdev->device) { case PCI_DEVICE_ID_3DFX_BANSHEE: - strcat(tdfx_fix.id, " Banshee"); + strcpy(tdfx_fix.id, "3Dfx Banshee"); default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK; break; case PCI_DEVICE_ID_3DFX_VOODOO3: - strcat(tdfx_fix.id, " Voodoo3"); + strcpy(tdfx_fix.id, "3Dfx Voodoo3"); default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK; break; case PCI_DEVICE_ID_3DFX_VOODOO5: - strcat(tdfx_fix.id, " Voodoo5"); + strcpy(tdfx_fix.id, "3Dfx Voodoo5"); default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK; break; } From 73442daf2ea85e2a779396b76b1a39b10188ecb5 Mon Sep 17 00:00:00 2001 From: Jan Altenberg Date: Tue, 2 Sep 2008 14:36:05 -0700 Subject: [PATCH 346/638] rtc_time_to_tm: fix signed/unsigned arithmetic commit 945185a69daa457c4c5e46e47f4afad7dcea734f ("rtc: rtc_time_to_tm: use unsigned arithmetic") changed the some types in rtc_time_to_tm() to unsigned: void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) { - register int days, month, year; + unsigned int days, month, year; This doesn't work for all cases, because days is checked for < 0 later on: if (days < 0) { year -= 1; days += 365 + LEAP_YEAR(year); } I think the correct fix would be to keep days signed and do an appropriate cast later on. Signed-off-by: Jan Altenberg Cc: Maciej W. Rozycki Cc: Alessandro Zummo Cc: David Brownell Cc: Dmitri Vorobiev Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-lib.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c index 9f996ec881c..dd70bf73ce9 100644 --- a/drivers/rtc/rtc-lib.c +++ b/drivers/rtc/rtc-lib.c @@ -51,10 +51,11 @@ EXPORT_SYMBOL(rtc_year_days); */ void rtc_time_to_tm(unsigned long time, struct rtc_time *tm) { - unsigned int days, month, year; + unsigned int month, year; + int days; days = time / 86400; - time -= days * 86400; + time -= (unsigned int) days * 86400; /* day of the week, 1970-01-01 was a Thursday */ tm->tm_wday = (days + 4) % 7; From bb8fb4e6840ecebdc61f7ebd0653187e7128dde5 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 2 Sep 2008 14:36:07 -0700 Subject: [PATCH 347/638] ibft: fix target info parsing in ibft module I got this patch through Red Hat's bugzilla from the bug submitter and patch creator. I have just fixed it up so it applies without fuzz to upstream kernels. Original patch and description from Shyam kumar Iyer: The issue [ibft module not displaying targets with short names] is because of an offset calculatation error in the iscsi_ibft.c code. Due to this error directory structure for the target in /sys/firmware/ibft does not get created and so the initiator is unable to connect to the target. Note that this bug surfaced only with an name that had a short section at the end. eg: "iqn.1984-05.com.dell:dell". It did not surface when the iqn's had a longer section at the end. eg: "iqn.2001-04.com.example:storage.disk2.sys1.xyz" So, the eot_offset was calculated such that an extra 48 bytes i.e. the size of the ibft_header which has already been accounted was subtracted twice. This was not evident with longer iqn names because they would overshoot the total ibft length more than 48 bytes and thus would escape the bug. Signed-off-by: Shyam Kumar Iyer Signed-off-by: Mike Christie Cc: Konrad Rzeszutek Cc: Peter Jones Cc: James Bottomley Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/iscsi_ibft.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 8024e3bfd87..b91ef63126e 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -669,8 +669,7 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header, control = (void *)header + sizeof(*header); end = (void *)control + control->hdr.length; - eot_offset = (void *)header + header->length - - (void *)control - sizeof(*header); + eot_offset = (void *)header + header->length - (void *)control; rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control, sizeof(*control)); From 8b3a8944a9c0f2a3afc1678798b44f0442924a37 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 2 Sep 2008 14:36:09 -0700 Subject: [PATCH 348/638] sysfs: document files in /sys/firmware/sgi_uv/ Document files in /sys/firmware/sgi_uv/. Signed-off-by: Russ Anderson Cc: Jack Steiner Cc: Ingo Molnar Cc: Thomas Gleixner Acked-by: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- .../ABI/testing/sysfs-firmware-sgi_uv | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-firmware-sgi_uv diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv new file mode 100644 index 00000000000..4573fd4b787 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv @@ -0,0 +1,27 @@ +What: /sys/firmware/sgi_uv/ +Date: August 2008 +Contact: Russ Anderson +Description: + The /sys/firmware/sgi_uv directory contains information + about the SGI UV platform. + + Under that directory are a number of files: + + partition_id + coherence_id + + The partition_id entry contains the partition id. + SGI UV systems can be partitioned into multiple physical + machines, which each partition running a unique copy + of the operating system. Each partition will have a unique + partition id. To display the partition id, use the command: + + cat /sys/firmware/sgi_uv/partition_id + + The coherence_id entry contains the coherence id. + A partitioned SGI UV system can have one or more coherence + domain. The coherence id indicates which coherence domain + this partition is in. To display the coherence id, use the + command: + + cat /sys/firmware/sgi_uv/coherence_id From 74c4633da7994eddcfcd2762a448c6889cc2b5bd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 2 Sep 2008 14:36:11 -0700 Subject: [PATCH 349/638] rtc-cmos: wake again from S5 Update rtc-cmos shutdown handling to leave RTC alarms active, resolving http://bugzilla.kernel.org/show_bug.cgi?id=11411 on several boards. There are still some systems where the ACPI event handling doesn't cooperate. (Possibly related to bugid 11312, reporting the spontaneous disabling of RTC events.) Bug 11411 reported that changes to work around some ACPI event issues broke wake-from-S5 handling, as used for DVR applications. (They like to power off, then wake later to record programs.) [yakui.zhao@intel.com: add shutdown for PNP devices] [dbrownell@users.sourceforge.net: update comments] Signed-off-by: Rafael J. Wysocki Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: David Brownell Cc: Stefan Bauer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 6ea349aba3b..b184367637d 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -800,7 +800,6 @@ static void __exit cmos_do_remove(struct device *dev) static int cmos_suspend(struct device *dev, pm_message_t mesg) { struct cmos_rtc *cmos = dev_get_drvdata(dev); - int do_wake = device_may_wakeup(dev); unsigned char tmp; /* only the alarm might be a wakeup event source */ @@ -809,7 +808,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) { unsigned char mask; - if (do_wake) + if (device_may_wakeup(dev)) mask = RTC_IRQMASK & ~RTC_AIE; else mask = RTC_IRQMASK; @@ -837,6 +836,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) return 0; } +/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even + * after a detour through G3 "mechanical off", although the ACPI spec + * says wakeup should only work from G1/S4 "hibernate". To most users, + * distinctions between S4 and S5 are pointless. So when the hardware + * allows, don't draw that distinction. + */ +static inline int cmos_poweroff(struct device *dev) +{ + return cmos_suspend(dev, PMSG_HIBERNATE); +} + static int cmos_resume(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); @@ -884,6 +894,12 @@ static int cmos_resume(struct device *dev) #else #define cmos_suspend NULL #define cmos_resume NULL + +static inline int cmos_poweroff(struct device *dev) +{ + return -ENOSYS; +} + #endif /*----------------------------------------------------------------*/ @@ -903,10 +919,6 @@ static int cmos_resume(struct device *dev) static int __devinit cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { - /* REVISIT paranoia argues for a shutdown notifier, since PNP - * drivers can't provide shutdown() methods to disable IRQs. - * Or better yet, fix PNP to allow those methods... - */ if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0)) /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to @@ -942,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp) #define cmos_pnp_resume NULL #endif +static void cmos_pnp_shutdown(struct device *pdev) +{ + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev)) + return; + + cmos_do_shutdown(); +} static const struct pnp_device_id rtc_ids[] = { { .id = "PNP0b00", }, @@ -961,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = { .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .suspend = cmos_pnp_suspend, .resume = cmos_pnp_resume, + .driver = { + .name = (char *)driver_name, + .shutdown = cmos_pnp_shutdown, + } }; #endif /* CONFIG_PNP */ @@ -986,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev) static void cmos_platform_shutdown(struct platform_device *pdev) { + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev)) + return; + cmos_do_shutdown(); } From 9d3593574702ae1899e23a1535da1ac71f928042 Mon Sep 17 00:00:00 2001 From: John Kacur Date: Tue, 2 Sep 2008 14:36:13 -0700 Subject: [PATCH 350/638] pm_qos_requirement might sleep Make PM_QOS and CPU_IDLE play nicer when run with the RT-Preempt kernel. The purpose of the patch is to remove the spin_lock around the read in the function pm_qos_requirement - since spinlocks can sleep in -rt and this function is called from idle. CPU_IDLE polls the target_value's of some of the pm_qos parameters from the idle loop causing sleeping locking warnings. Changing the target_value to an atomic avoids this issue. Remove the spinlock in pm_qos_requirement by making target_value an atomic type. Signed-off-by: mark gross Signed-off-by: John Kacur Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/pm_qos_params.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c index da9c2dda6a4..dfdec524d1b 100644 --- a/kernel/pm_qos_params.c +++ b/kernel/pm_qos_params.c @@ -43,7 +43,7 @@ #include /* - * locking rule: all changes to target_value or requirements or notifiers lists + * locking rule: all changes to requirements or notifiers lists * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock * held, taken with _irqsave. One lock to rule them all */ @@ -66,7 +66,7 @@ struct pm_qos_object { struct miscdevice pm_qos_power_miscdev; char *name; s32 default_value; - s32 target_value; + atomic_t target_value; s32 (*comparitor)(s32, s32); }; @@ -77,7 +77,7 @@ static struct pm_qos_object cpu_dma_pm_qos = { .notifiers = &cpu_dma_lat_notifier, .name = "cpu_dma_latency", .default_value = 2000 * USEC_PER_SEC, - .target_value = 2000 * USEC_PER_SEC, + .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC), .comparitor = min_compare }; @@ -87,7 +87,7 @@ static struct pm_qos_object network_lat_pm_qos = { .notifiers = &network_lat_notifier, .name = "network_latency", .default_value = 2000 * USEC_PER_SEC, - .target_value = 2000 * USEC_PER_SEC, + .target_value = ATOMIC_INIT(2000 * USEC_PER_SEC), .comparitor = min_compare }; @@ -99,7 +99,7 @@ static struct pm_qos_object network_throughput_pm_qos = { .notifiers = &network_throughput_notifier, .name = "network_throughput", .default_value = 0, - .target_value = 0, + .target_value = ATOMIC_INIT(0), .comparitor = max_compare }; @@ -150,11 +150,11 @@ static void update_target(int target) extreme_value = pm_qos_array[target]->comparitor( extreme_value, node->value); } - if (pm_qos_array[target]->target_value != extreme_value) { + if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) { call_notifier = 1; - pm_qos_array[target]->target_value = extreme_value; + atomic_set(&pm_qos_array[target]->target_value, extreme_value); pr_debug(KERN_ERR "new target for qos %d is %d\n", target, - pm_qos_array[target]->target_value); + atomic_read(&pm_qos_array[target]->target_value)); } spin_unlock_irqrestore(&pm_qos_lock, flags); @@ -193,14 +193,7 @@ static int find_pm_qos_object_by_minor(int minor) */ int pm_qos_requirement(int pm_qos_class) { - int ret_val; - unsigned long flags; - - spin_lock_irqsave(&pm_qos_lock, flags); - ret_val = pm_qos_array[pm_qos_class]->target_value; - spin_unlock_irqrestore(&pm_qos_lock, flags); - - return ret_val; + return atomic_read(&pm_qos_array[pm_qos_class]->target_value); } EXPORT_SYMBOL_GPL(pm_qos_requirement); From 8b76f46a2db29407fed66cf4aca19d61b3dcb3e1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 2 Sep 2008 14:36:14 -0700 Subject: [PATCH 351/638] drivers/char/random.c: fix a race which can lead to a bogus BUG() Fix a bug reported by and diagnosed by Aaron Straus. This is a regression intruduced into 2.6.26 by commit adc782dae6c4c0f6fb679a48a544cfbcd79ae3dc Author: Matt Mackall Date: Tue Apr 29 01:03:07 2008 -0700 random: simplify and rename credit_entropy_store credit_entropy_bits() does: spin_lock_irqsave(&r->lock, flags); ... if (r->entropy_count > r->poolinfo->POOLBITS) r->entropy_count = r->poolinfo->POOLBITS; so there is a time window in which this BUG_ON(): static size_t account(struct entropy_store *r, size_t nbytes, int min, int reserved) { unsigned long flags; BUG_ON(r->entropy_count > r->poolinfo->POOLBITS); /* Hold lock while accounting */ spin_lock_irqsave(&r->lock, flags); can trigger. We could fix this by moving the assertion inside the lock, but it seems safer and saner to revert to the old behaviour wherein entropy_store.entropy_count at no time exceeds entropy_store.poolinfo->POOLBITS. Reported-by: Aaron Straus Cc: Matt Mackall Cc: Theodore Ts'o Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/random.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 1838aa3d24f..7ce1ac4baa6 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -407,7 +407,7 @@ struct entropy_store { /* read-write data: */ spinlock_t lock; unsigned add_ptr; - int entropy_count; + int entropy_count; /* Must at no time exceed ->POOLBITS! */ int input_rotate; }; @@ -520,6 +520,7 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes) static void credit_entropy_bits(struct entropy_store *r, int nbits) { unsigned long flags; + int entropy_count; if (!nbits) return; @@ -527,20 +528,20 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits) spin_lock_irqsave(&r->lock, flags); DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name); - r->entropy_count += nbits; - if (r->entropy_count < 0) { + entropy_count = r->entropy_count; + entropy_count += nbits; + if (entropy_count < 0) { DEBUG_ENT("negative entropy/overflow\n"); - r->entropy_count = 0; - } else if (r->entropy_count > r->poolinfo->POOLBITS) - r->entropy_count = r->poolinfo->POOLBITS; + entropy_count = 0; + } else if (entropy_count > r->poolinfo->POOLBITS) + entropy_count = r->poolinfo->POOLBITS; + r->entropy_count = entropy_count; /* should we wake readers? */ - if (r == &input_pool && - r->entropy_count >= random_read_wakeup_thresh) { + if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) { wake_up_interruptible(&random_read_wait); kill_fasync(&fasync, SIGIO, POLL_IN); } - spin_unlock_irqrestore(&r->lock, flags); } From 37b08e34a98c664bea86e3fae718ac45a46b7276 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 2 Sep 2008 20:14:15 -0700 Subject: [PATCH 352/638] ipsec: Fix deadlock in xfrm_state management. Ever since commit 4c563f7669c10a12354b72b518c2287ffc6ebfb3 ("[XFRM]: Speed up xfrm_policy and xfrm_state walking") it is illegal to call __xfrm_state_destroy (and thus xfrm_state_put()) with xfrm_state_lock held. If we do, we'll deadlock since we have the lock already and __xfrm_state_destroy() tries to take it again. Fix this by pushing the xfrm_state_put() calls after the lock is dropped. Signed-off-by: David S. Miller --- net/xfrm/xfrm_state.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 4c6914ef7d9..7bd62f61593 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -780,11 +780,13 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, { unsigned int h; struct hlist_node *entry; - struct xfrm_state *x, *x0; + struct xfrm_state *x, *x0, *to_put; int acquire_in_progress = 0; int error = 0; struct xfrm_state *best = NULL; + to_put = NULL; + spin_lock_bh(&xfrm_state_lock); h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family); hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) { @@ -833,7 +835,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, if (tmpl->id.spi && (x0 = __xfrm_state_lookup(daddr, tmpl->id.spi, tmpl->id.proto, family)) != NULL) { - xfrm_state_put(x0); + to_put = x0; error = -EEXIST; goto out; } @@ -849,7 +851,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid); if (error) { x->km.state = XFRM_STATE_DEAD; - xfrm_state_put(x); + to_put = x; x = NULL; goto out; } @@ -870,7 +872,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, xfrm_hash_grow_check(x->bydst.next != NULL); } else { x->km.state = XFRM_STATE_DEAD; - xfrm_state_put(x); + to_put = x; x = NULL; error = -ESRCH; } @@ -881,6 +883,8 @@ out: else *err = acquire_in_progress ? -EAGAIN : error; spin_unlock_bh(&xfrm_state_lock); + if (to_put) + xfrm_state_put(to_put); return x; } @@ -1067,18 +1071,20 @@ static struct xfrm_state *__xfrm_find_acq_byseq(u32 seq); int xfrm_state_add(struct xfrm_state *x) { - struct xfrm_state *x1; + struct xfrm_state *x1, *to_put; int family; int err; int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY); family = x->props.family; + to_put = NULL; + spin_lock_bh(&xfrm_state_lock); x1 = __xfrm_state_locate(x, use_spi, family); if (x1) { - xfrm_state_put(x1); + to_put = x1; x1 = NULL; err = -EEXIST; goto out; @@ -1088,7 +1094,7 @@ int xfrm_state_add(struct xfrm_state *x) x1 = __xfrm_find_acq_byseq(x->km.seq); if (x1 && ((x1->id.proto != x->id.proto) || xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) { - xfrm_state_put(x1); + to_put = x1; x1 = NULL; } } @@ -1110,6 +1116,9 @@ out: xfrm_state_put(x1); } + if (to_put) + xfrm_state_put(to_put); + return err; } EXPORT_SYMBOL(xfrm_state_add); @@ -1269,10 +1278,12 @@ EXPORT_SYMBOL(xfrm_state_migrate); int xfrm_state_update(struct xfrm_state *x) { - struct xfrm_state *x1; + struct xfrm_state *x1, *to_put; int err; int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY); + to_put = NULL; + spin_lock_bh(&xfrm_state_lock); x1 = __xfrm_state_locate(x, use_spi, x->props.family); @@ -1281,7 +1292,7 @@ int xfrm_state_update(struct xfrm_state *x) goto out; if (xfrm_state_kern(x1)) { - xfrm_state_put(x1); + to_put = x1; err = -EEXIST; goto out; } @@ -1295,6 +1306,9 @@ int xfrm_state_update(struct xfrm_state *x) out: spin_unlock_bh(&xfrm_state_lock); + if (to_put) + xfrm_state_put(to_put); + if (err) return err; From fbb16e243887332dd5754e48ffe5b963378f3cd2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 00:54:47 +0200 Subject: [PATCH 353/638] [x86] Fix TSC calibration issues Larry Finger reported at http://lkml.org/lkml/2008/9/1/90: An ancient laptop of mine started throwing errors from b43legacy when I started using 2.6.27 on it. This has been bisected to commit bfc0f59 "x86: merge tsc calibration". The unification of the TSC code adopted mostly the 64bit code, which prefers PMTIMER/HPET over the PIT calibration. Larrys system has an AMD K6 CPU. Such systems are known to have PMTIMER incarnations which run at double speed. This results in a miscalibration of the TSC by factor 0.5. So the resulting calibrated CPU/TSC speed is half of the real CPU speed, which means that the TSC based delay loop will run half the time it should run. That might explain why the b43legacy driver went berserk. On the other hand we know about systems, where the PIT based calibration results in random crap due to heavy SMI/SMM disturbance. On those systems the PMTIMER/HPET based calibration logic with SMI detection shows better results. According to Alok also virtualized systems suffer from the PIT calibration method. The solution is to use a more wreckage aware aproach than the current either/or decision. 1) reimplement the retry loop which was dropped from the 32bit code during the merge. It repeats the calibration and selects the lowest frequency value as this is probably the closest estimate to the real frequency 2) Monitor the delta of the TSC values in the delay loop which waits for the PIT counter to reach zero. If the maximum value is significantly different from the minimum, then we have a pretty safe indicator that the loop was disturbed by an SMI. 3) keep the pmtimer/hpet reference as a backup solution for systems where the SMI disturbance is a permanent point of failure for PIT based calibration 4) do the loop iteration for both methods, record the lowest value and decide after all iterations finished. 5) Set a clear preference to PIT based calibration when the result makes sense. The implementation does the reference calibration based on HPET/PMTIMER around the delay, which is necessary for the PIT anyway, but keeps separate TSC values to ensure the "independency" of the resulting calibration values. Tested on various 32bit/64bit machines including Geode 266Mhz, AMD K6 (affected machine with a double speed pmtimer which I grabbed out of the dump), Pentium class machines and AMD/Intel 64 bit boxen. Bisected-by: Larry Finger Signed-off-by: Thomas Gleixner Tested-by: Larry Finger Signed-off-by: Linus Torvalds --- arch/x86/kernel/tsc.c | 235 ++++++++++++++++++++++++++++++++---------- 1 file changed, 181 insertions(+), 54 deletions(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 8e786b0d665..ac79bd143da 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -127,75 +127,202 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet) */ unsigned long native_calibrate_tsc(void) { - unsigned long flags; - u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2; - int hpet = is_hpet_enabled(); - unsigned int tsc_khz_val = 0; - - local_irq_save(flags); - - tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); - - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - outb(0xb0, 0x43); - outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); - tr1 = get_cycles(); - while ((inb(0x61) & 0x20) == 0); - tr2 = get_cycles(); - - tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); - - local_irq_restore(flags); + u64 tsc1, tsc2, tr1, tr2, tsc, delta, pm1, pm2, hpet1, hpet2; + unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; + unsigned long flags, tscmin, tscmax; + int hpet = is_hpet_enabled(), pitcnt, i; /* - * Preset the result with the raw and inaccurate PIT - * calibration value + * Run 5 calibration loops to get the lowest frequency value + * (the best estimate). We use two different calibration modes + * here: + * + * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and + * load a timeout of 50ms. We read the time right after we + * started the timer and wait until the PIT count down reaches + * zero. In each wait loop iteration we read the TSC and check + * the delta to the previous read. We keep track of the min + * and max values of that delta. The delta is mostly defined + * by the IO time of the PIT access, so we can detect when a + * SMI/SMM disturbance happend between the two reads. If the + * maximum time is significantly larger than the minimum time, + * then we discard the result and have another try. + * + * 2) Reference counter. If available we use the HPET or the + * PMTIMER as a reference to check the sanity of that value. + * We use separate TSC readouts and check inside of the + * reference read for a SMI/SMM disturbance. We dicard + * disturbed values here as well. We do that around the PIT + * calibration delay loop as we have to wait for a certain + * amount of time anyway. */ - delta = (tr2 - tr1); - do_div(delta, 50); - tsc_khz_val = delta; + for (i = 0; i < 5; i++) { - /* hpet or pmtimer available ? */ + tscmin = ULONG_MAX; + tscmax = 0; + pitcnt = 0; + + local_irq_save(flags); + + /* + * Read the start value and the reference count of + * hpet/pmtimer when available: + */ + tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); + + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Setup CTC channel 2* for mode 0, (interrupt on terminal + * count mode), binary count. Set the latch register to 50ms + * (LSB then MSB) to begin countdown. + * + * Some devices need a delay here. + */ + outb(0xb0, 0x43); + outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); + outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); + + tsc = tr1 = tr2 = get_cycles(); + + while ((inb(0x61) & 0x20) == 0) { + tr2 = get_cycles(); + delta = tr2 - tsc; + tsc = tr2; + if ((unsigned int) delta < tscmin) + tscmin = (unsigned int) delta; + if ((unsigned int) delta > tscmax) + tscmax = (unsigned int) delta; + pitcnt++; + } + + /* + * We waited at least 50ms above. Now read + * pmtimer/hpet reference again + */ + tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); + + local_irq_restore(flags); + + /* + * Sanity checks: + * + * If we were not able to read the PIT more than 5000 + * times, then we have been hit by a massive SMI + * + * If the maximum is 10 times larger than the minimum, + * then we got hit by an SMI as well. + */ + if (pitcnt > 5000 && tscmax < 10 * tscmin) { + + /* Calculate the PIT value */ + delta = tr2 - tr1; + do_div(delta, 50); + + /* We take the smallest value into account */ + tsc_pit_min = min(tsc_pit_min, (unsigned long) delta); + } + + /* hpet or pmtimer available ? */ + if (!hpet && !pm1 && !pm2) + continue; + + /* Check, whether the sampling was disturbed by an SMI */ + if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) + continue; + + tsc2 = (tsc2 - tsc1) * 1000000LL; + + if (hpet) { + if (hpet2 < hpet1) + hpet2 += 0x100000000ULL; + hpet2 -= hpet1; + tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); + do_div(tsc1, 1000000); + } else { + if (pm2 < pm1) + pm2 += (u64)ACPI_PM_OVRRUN; + pm2 -= pm1; + tsc1 = pm2 * 1000000000LL; + do_div(tsc1, PMTMR_TICKS_PER_SEC); + } + + do_div(tsc2, tsc1); + tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2); + } + + /* + * Now check the results. + */ + if (tsc_pit_min == ULONG_MAX) { + /* PIT gave no useful value */ + printk(KERN_WARNING "TSC: PIT calibration failed due to " + "SMI disturbance.\n"); + + /* We don't have an alternative source, disable TSC */ + if (!hpet && !pm1 && !pm2) { + printk("TSC: No reference (HPET/PMTIMER) available\n"); + return 0; + } + + /* The alternative source failed as well, disable TSC */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration " + "failed due to SMI disturbance.\n"); + return 0; + } + + /* Use the alternative source */ + printk(KERN_INFO "TSC: using %s reference calibration\n", + hpet ? "HPET" : "PMTIMER"); + + return tsc_ref_min; + } + + /* We don't have an alternative source, use the PIT calibration value */ if (!hpet && !pm1 && !pm2) { - printk(KERN_INFO "TSC calibrated against PIT\n"); - goto out; + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; } - /* Check, whether the sampling was disturbed by an SMI */ - if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) { - printk(KERN_WARNING "TSC calibration disturbed by SMI, " - "using PIT calibration result\n"); - goto out; + /* The alternative source failed, use the PIT calibration value */ + if (tsc_ref_min == ULONG_MAX) { + printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due " + "to SMI disturbance. Using PIT calibration\n"); + return tsc_pit_min; } - tsc2 = (tsc2 - tsc1) * 1000000LL; + /* Check the reference deviation */ + delta = ((u64) tsc_pit_min) * 100; + do_div(delta, tsc_ref_min); - if (hpet) { - printk(KERN_INFO "TSC calibrated against HPET\n"); - if (hpet2 < hpet1) - hpet2 += 0x100000000ULL; - hpet2 -= hpet1; - tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD)); - do_div(tsc1, 1000000); - } else { - printk(KERN_INFO "TSC calibrated against PM_TIMER\n"); - if (pm2 < pm1) - pm2 += (u64)ACPI_PM_OVRRUN; - pm2 -= pm1; - tsc1 = pm2 * 1000000000LL; - do_div(tsc1, PMTMR_TICKS_PER_SEC); + /* + * If both calibration results are inside a 5% window, the we + * use the lower frequency of those as it is probably the + * closest estimate. + */ + if (delta >= 95 && delta <= 105) { + printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n", + hpet ? "HPET" : "PMTIMER"); + printk(KERN_INFO "TSC: using %s calibration value\n", + tsc_pit_min <= tsc_ref_min ? "PIT" : + hpet ? "HPET" : "PMTIMER"); + return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min; } - do_div(tsc2, tsc1); - tsc_khz_val = tsc2; + printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n", + hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min); -out: - return tsc_khz_val; + /* + * The calibration values differ too much. In doubt, we use + * the PIT value as we know that there are PMTIMERs around + * running at double speed. + */ + printk(KERN_INFO "TSC: Using PIT calibration value\n"); + return tsc_pit_min; } - #ifdef CONFIG_X86_32 /* Only called from the Powernow K7 cpu freq driver */ int recalibrate_cpu_khz(void) From 6c00055a819ce8a6e2c3af2f65d4ea1a8559c491 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 2 Sep 2008 23:38:32 -0700 Subject: [PATCH 354/638] tipc: Don't use structure names which easily globally conflict. Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: David S. Miller --- net/tipc/bcast.c | 22 ++++++++-------- net/tipc/bcast.h | 22 ++++++++-------- net/tipc/bearer.c | 2 +- net/tipc/bearer.h | 2 +- net/tipc/cluster.c | 16 +++++------ net/tipc/cluster.h | 10 +++---- net/tipc/discover.c | 2 +- net/tipc/link.c | 26 +++++++++--------- net/tipc/link.h | 2 +- net/tipc/name_table.h | 2 +- net/tipc/net.c | 2 +- net/tipc/net.h | 2 +- net/tipc/node.c | 60 +++++++++++++++++++++--------------------- net/tipc/node.h | 42 ++++++++++++++--------------- net/tipc/node_subscr.c | 4 +-- net/tipc/node_subscr.h | 10 +++---- net/tipc/port.h | 2 +- net/tipc/zone.c | 4 +-- net/tipc/zone.h | 2 +- 19 files changed, 117 insertions(+), 117 deletions(-) diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c index b1ff16aa4bd..3ddaff42d1b 100644 --- a/net/tipc/bcast.c +++ b/net/tipc/bcast.c @@ -96,8 +96,8 @@ struct bcbearer { struct media media; struct bcbearer_pair bpairs[MAX_BEARERS]; struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1]; - struct node_map remains; - struct node_map remains_new; + struct tipc_node_map remains; + struct tipc_node_map remains_new; }; /** @@ -110,7 +110,7 @@ struct bcbearer { struct bclink { struct link link; - struct node node; + struct tipc_node node; }; @@ -149,7 +149,7 @@ static void bcbuf_decr_acks(struct sk_buff *buf) * Called with 'node' locked, bc_lock unlocked */ -static void bclink_set_gap(struct node *n_ptr) +static void bclink_set_gap(struct tipc_node *n_ptr) { struct sk_buff *buf = n_ptr->bclink.deferred_head; @@ -202,7 +202,7 @@ static void bclink_retransmit_pkt(u32 after, u32 to) * Node is locked, bc_lock unlocked. */ -void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked) +void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked) { struct sk_buff *crs; struct sk_buff *next; @@ -250,7 +250,7 @@ void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked) * tipc_net_lock and node lock set */ -static void bclink_send_ack(struct node *n_ptr) +static void bclink_send_ack(struct tipc_node *n_ptr) { struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1]; @@ -264,7 +264,7 @@ static void bclink_send_ack(struct node *n_ptr) * tipc_net_lock and node lock set */ -static void bclink_send_nack(struct node *n_ptr) +static void bclink_send_nack(struct tipc_node *n_ptr) { struct sk_buff *buf; struct tipc_msg *msg; @@ -308,7 +308,7 @@ static void bclink_send_nack(struct node *n_ptr) * tipc_net_lock and node lock set */ -void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent) +void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent) { if (!n_ptr->bclink.supported || less_eq(last_sent, mod(n_ptr->bclink.last_in))) @@ -328,7 +328,7 @@ void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent) static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to) { - struct node *n_ptr = tipc_node_find(dest); + struct tipc_node *n_ptr = tipc_node_find(dest); u32 my_after, my_to; if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr))) @@ -418,7 +418,7 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf) static int rx_count = 0; #endif struct tipc_msg *msg = buf_msg(buf); - struct node* node = tipc_node_find(msg_prevnode(msg)); + struct tipc_node* node = tipc_node_find(msg_prevnode(msg)); u32 next_in; u32 seqno; struct sk_buff *deferred; @@ -538,7 +538,7 @@ u32 tipc_bclink_get_last_sent(void) return last_sent; } -u32 tipc_bclink_acks_missing(struct node *n_ptr) +u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr) { return (n_ptr->bclink.supported && (tipc_bclink_get_last_sent() != n_ptr->bclink.acked)); diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h index a2416fa6b90..5aa024b99c5 100644 --- a/net/tipc/bcast.h +++ b/net/tipc/bcast.h @@ -41,12 +41,12 @@ #define WSIZE 32 /** - * struct node_map - set of node identifiers + * struct tipc_node_map - set of node identifiers * @count: # of nodes in set * @map: bitmap of node identifiers that are in the set */ -struct node_map { +struct tipc_node_map { u32 count; u32 map[MAX_NODES / WSIZE]; }; @@ -68,7 +68,7 @@ struct port_list { }; -struct node; +struct tipc_node; extern char tipc_bclink_name[]; @@ -77,7 +77,7 @@ extern char tipc_bclink_name[]; * nmap_add - add a node to a node map */ -static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node) +static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node) { int n = tipc_node(node); int w = n / WSIZE; @@ -93,7 +93,7 @@ static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node) * nmap_remove - remove a node from a node map */ -static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node) +static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node) { int n = tipc_node(node); int w = n / WSIZE; @@ -109,7 +109,7 @@ static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node) * nmap_equal - test for equality of node maps */ -static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b) +static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b) { return !memcmp(nm_a, nm_b, sizeof(*nm_a)); } @@ -121,8 +121,8 @@ static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b) * @nm_diff: output node map A-B (i.e. nodes of A that are not in B) */ -static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b, - struct node_map *nm_diff) +static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b, + struct tipc_node_map *nm_diff) { int stop = sizeof(nm_a->map) / sizeof(u32); int w; @@ -195,12 +195,12 @@ static inline void tipc_port_list_free(struct port_list *pl_ptr) int tipc_bclink_init(void); void tipc_bclink_stop(void); -void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked); +void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked); int tipc_bclink_send_msg(struct sk_buff *buf); void tipc_bclink_recv_pkt(struct sk_buff *buf); u32 tipc_bclink_get_last_sent(void); -u32 tipc_bclink_acks_missing(struct node *n_ptr); -void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno); +u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr); +void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno); int tipc_bclink_stats(char *stats_buf, const u32 buf_size); int tipc_bclink_reset_stats(void); int tipc_bclink_set_queue_limits(u32 limit); diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c index 6a9aba3edd0..a7a36779b9b 100644 --- a/net/tipc/bearer.c +++ b/net/tipc/bearer.c @@ -599,7 +599,7 @@ int tipc_block_bearer(const char *name) spin_lock_bh(&b_ptr->publ.lock); b_ptr->publ.blocked = 1; list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) { - struct node *n_ptr = l_ptr->owner; + struct tipc_node *n_ptr = l_ptr->owner; spin_lock_bh(&n_ptr->lock); tipc_link_reset(l_ptr); diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h index 6a36b6600e6..ca573489271 100644 --- a/net/tipc/bearer.h +++ b/net/tipc/bearer.h @@ -104,7 +104,7 @@ struct bearer { u32 continue_count; int active; char net_plane; - struct node_map nodes; + struct tipc_node_map nodes; }; struct bearer_name { diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c index 46ee6c58532..689fdefe9d0 100644 --- a/net/tipc/cluster.c +++ b/net/tipc/cluster.c @@ -48,8 +48,8 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf, u32 lower, u32 upper); static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest); -struct node **tipc_local_nodes = NULL; -struct node_map tipc_cltr_bcast_nodes = {0,{0,}}; +struct tipc_node **tipc_local_nodes = NULL; +struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}}; u32 tipc_highest_allowed_slave = 0; struct cluster *tipc_cltr_create(u32 addr) @@ -115,7 +115,7 @@ void tipc_cltr_delete(struct cluster *c_ptr) u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr) { - struct node *n_ptr; + struct tipc_node *n_ptr; u32 n_num = tipc_node(addr) + 1; if (!c_ptr) @@ -133,7 +133,7 @@ u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr) return 0; } -void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr) +void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr) { u32 n_num = tipc_node(n_ptr->addr); u32 max_n_num = tipc_max_nodes; @@ -196,7 +196,7 @@ u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref) * Uses deterministic and fair algorithm. */ -struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector) +struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector) { u32 n_num; u32 mask = tipc_max_nodes; @@ -379,7 +379,7 @@ void tipc_cltr_recv_routing_table(struct sk_buff *buf) { struct tipc_msg *msg = buf_msg(buf); struct cluster *c_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; unchar *node_table; u32 table_size; u32 router; @@ -499,7 +499,7 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf, u32 lower, u32 upper) { struct sk_buff *buf_copy; - struct node *n_ptr; + struct tipc_node *n_ptr; u32 n_num; u32 tstop; @@ -534,7 +534,7 @@ void tipc_cltr_broadcast(struct sk_buff *buf) { struct sk_buff *buf_copy; struct cluster *c_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; u32 n_num; u32 tstart; u32 tstop; diff --git a/net/tipc/cluster.h b/net/tipc/cluster.h index 62df074afae..333efb0b9c4 100644 --- a/net/tipc/cluster.h +++ b/net/tipc/cluster.h @@ -54,24 +54,24 @@ struct cluster { u32 addr; struct _zone *owner; - struct node **nodes; + struct tipc_node **nodes; u32 highest_node; u32 highest_slave; }; -extern struct node **tipc_local_nodes; +extern struct tipc_node **tipc_local_nodes; extern u32 tipc_highest_allowed_slave; -extern struct node_map tipc_cltr_bcast_nodes; +extern struct tipc_node_map tipc_cltr_bcast_nodes; void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router); void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest); -struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector); +struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector); u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref); void tipc_cltr_recv_routing_table(struct sk_buff *buf); struct cluster *tipc_cltr_create(u32 addr); void tipc_cltr_delete(struct cluster *c_ptr); -void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr); +void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr); void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest); void tipc_cltr_broadcast(struct sk_buff *buf); int tipc_cltr_init(void); diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 1657f0e795f..74b7d1e28ae 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -193,7 +193,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr) /* Always accept link here */ struct sk_buff *rbuf; struct tipc_media_addr *addr; - struct node *n_ptr = tipc_node_find(orig); + struct tipc_node *n_ptr = tipc_node_find(orig); int link_fully_up; dbg(" in own cluster\n"); diff --git a/net/tipc/link.c b/net/tipc/link.c index d60113ba4b1..dd4c18b9a35 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -1155,7 +1155,7 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf) int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector) { struct link *l_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; int res = -ELINKCONG; read_lock_bh(&tipc_net_lock); @@ -1226,7 +1226,7 @@ static int link_send_buf_fast(struct link *l_ptr, struct sk_buff *buf, int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode) { struct link *l_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; int res; u32 selector = msg_origport(buf_msg(buf)) & 1; u32 dummy; @@ -1270,7 +1270,7 @@ int tipc_link_send_sections_fast(struct port *sender, struct tipc_msg *hdr = &sender->publ.phdr; struct link *l_ptr; struct sk_buff *buf; - struct node *node; + struct tipc_node *node; int res; u32 selector = msg_origport(hdr) & 1; @@ -1364,7 +1364,7 @@ static int link_send_sections_long(struct port *sender, u32 destaddr) { struct link *l_ptr; - struct node *node; + struct tipc_node *node; struct tipc_msg *hdr = &sender->publ.phdr; u32 dsz = msg_data_sz(hdr); u32 max_pkt,fragm_sz,rest; @@ -1636,7 +1636,7 @@ void tipc_link_push_queue(struct link *l_ptr) static void link_reset_all(unsigned long addr) { - struct node *n_ptr; + struct tipc_node *n_ptr; char addr_string[16]; u32 i; @@ -1682,7 +1682,7 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf) /* Handle failure on broadcast link */ - struct node *n_ptr; + struct tipc_node *n_ptr; char addr_string[16]; tipc_printf(TIPC_OUTPUT, "Msg seq number: %u, ", msg_seqno(msg)); @@ -1843,7 +1843,7 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr) read_lock_bh(&tipc_net_lock); while (head) { struct bearer *b_ptr = (struct bearer *)tb_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; struct link *l_ptr; struct sk_buff *crs; struct sk_buff *buf = head; @@ -2935,7 +2935,7 @@ void tipc_link_set_queue_limits(struct link *l_ptr, u32 window) * Returns pointer to link (or 0 if invalid link name). */ -static struct link *link_find_link(const char *name, struct node **node) +static struct link *link_find_link(const char *name, struct tipc_node **node) { struct link_name link_name_parts; struct bearer *b_ptr; @@ -2965,7 +2965,7 @@ struct sk_buff *tipc_link_cmd_config(const void *req_tlv_area, int req_tlv_space struct tipc_link_config *args; u32 new_value; struct link *l_ptr; - struct node *node; + struct tipc_node *node; int res; if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG)) @@ -3043,7 +3043,7 @@ struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_ { char *link_name; struct link *l_ptr; - struct node *node; + struct tipc_node *node; if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME)) return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR); @@ -3091,7 +3091,7 @@ static int tipc_link_stats(const char *name, char *buf, const u32 buf_size) { struct print_buf pb; struct link *l_ptr; - struct node *node; + struct tipc_node *node; char *status; u32 profile_total = 0; @@ -3207,7 +3207,7 @@ int link_control(const char *name, u32 op, u32 val) int res = -EINVAL; struct link *l_ptr; u32 bearer_id; - struct node * node; + struct tipc_node * node; u32 a; a = link_name2addr(name, &bearer_id); @@ -3249,7 +3249,7 @@ int link_control(const char *name, u32 op, u32 val) u32 tipc_link_get_max_pkt(u32 dest, u32 selector) { - struct node *n_ptr; + struct tipc_node *n_ptr; struct link *l_ptr; u32 res = MAX_PKT_DEFAULT; diff --git a/net/tipc/link.h b/net/tipc/link.h index 52f3e7c1871..6a51e38ad25 100644 --- a/net/tipc/link.h +++ b/net/tipc/link.h @@ -116,7 +116,7 @@ struct link { char name[TIPC_MAX_LINK_NAME]; struct tipc_media_addr media_addr; struct timer_list timer; - struct node *owner; + struct tipc_node *owner; struct list_head link_list; /* Management and link supervision data */ diff --git a/net/tipc/name_table.h b/net/tipc/name_table.h index b9e7cd336d7..139882d4ed0 100644 --- a/net/tipc/name_table.h +++ b/net/tipc/name_table.h @@ -76,7 +76,7 @@ struct publication { u32 node; u32 ref; u32 key; - struct node_subscr subscr; + struct tipc_node_subscr subscr; struct list_head local_list; struct list_head pport_list; struct publication *node_list_next; diff --git a/net/tipc/net.c b/net/tipc/net.c index ec7b04fbdc4..7906608bf51 100644 --- a/net/tipc/net.c +++ b/net/tipc/net.c @@ -118,7 +118,7 @@ DEFINE_RWLOCK(tipc_net_lock); struct network tipc_net = { NULL }; -struct node *tipc_net_select_remote_node(u32 addr, u32 ref) +struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref) { return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref); } diff --git a/net/tipc/net.h b/net/tipc/net.h index d154ac2bda9..de2b9ad8f64 100644 --- a/net/tipc/net.h +++ b/net/tipc/net.h @@ -55,7 +55,7 @@ extern rwlock_t tipc_net_lock; void tipc_net_remove_as_router(u32 router); void tipc_net_send_external_routes(u32 dest); void tipc_net_route_msg(struct sk_buff *buf); -struct node *tipc_net_select_remote_node(u32 addr, u32 ref); +struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref); u32 tipc_net_select_router(u32 addr, u32 ref); int tipc_net_start(u32 addr); diff --git a/net/tipc/node.c b/net/tipc/node.c index ee952ad6021..20d98c56e15 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -46,11 +46,11 @@ #include "bearer.h" #include "name_distr.h" -void node_print(struct print_buf *buf, struct node *n_ptr, char *str); -static void node_lost_contact(struct node *n_ptr); -static void node_established_contact(struct node *n_ptr); +void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str); +static void node_lost_contact(struct tipc_node *n_ptr); +static void node_established_contact(struct tipc_node *n_ptr); -struct node *tipc_nodes = NULL; /* sorted list of nodes within cluster */ +struct tipc_node *tipc_nodes = NULL; /* sorted list of nodes within cluster */ static DEFINE_SPINLOCK(node_create_lock); @@ -66,11 +66,11 @@ u32 tipc_own_tag = 0; * but this is a non-trivial change.) */ -struct node *tipc_node_create(u32 addr) +struct tipc_node *tipc_node_create(u32 addr) { struct cluster *c_ptr; - struct node *n_ptr; - struct node **curr_node; + struct tipc_node *n_ptr; + struct tipc_node **curr_node; spin_lock_bh(&node_create_lock); @@ -120,7 +120,7 @@ struct node *tipc_node_create(u32 addr) return n_ptr; } -void tipc_node_delete(struct node *n_ptr) +void tipc_node_delete(struct tipc_node *n_ptr) { if (!n_ptr) return; @@ -146,7 +146,7 @@ void tipc_node_delete(struct node *n_ptr) * Link becomes active (alone or shared) or standby, depending on its priority. */ -void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr) +void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr) { struct link **active = &n_ptr->active_links[0]; @@ -180,7 +180,7 @@ void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr) * node_select_active_links - select active link */ -static void node_select_active_links(struct node *n_ptr) +static void node_select_active_links(struct tipc_node *n_ptr) { struct link **active = &n_ptr->active_links[0]; u32 i; @@ -208,7 +208,7 @@ static void node_select_active_links(struct node *n_ptr) * tipc_node_link_down - handle loss of link */ -void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr) +void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr) { struct link **active; @@ -235,30 +235,30 @@ void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr) node_lost_contact(n_ptr); } -int tipc_node_has_active_links(struct node *n_ptr) +int tipc_node_has_active_links(struct tipc_node *n_ptr) { return (n_ptr && ((n_ptr->active_links[0]) || (n_ptr->active_links[1]))); } -int tipc_node_has_redundant_links(struct node *n_ptr) +int tipc_node_has_redundant_links(struct tipc_node *n_ptr) { return (n_ptr->working_links > 1); } -static int tipc_node_has_active_routes(struct node *n_ptr) +static int tipc_node_has_active_routes(struct tipc_node *n_ptr) { return (n_ptr && (n_ptr->last_router >= 0)); } -int tipc_node_is_up(struct node *n_ptr) +int tipc_node_is_up(struct tipc_node *n_ptr) { return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr)); } -struct node *tipc_node_attach_link(struct link *l_ptr) +struct tipc_node *tipc_node_attach_link(struct link *l_ptr) { - struct node *n_ptr = tipc_node_find(l_ptr->addr); + struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr); if (!n_ptr) n_ptr = tipc_node_create(l_ptr->addr); @@ -285,7 +285,7 @@ struct node *tipc_node_attach_link(struct link *l_ptr) return NULL; } -void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr) +void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr) { n_ptr->links[l_ptr->b_ptr->identity] = NULL; tipc_net.zones[tipc_zone(l_ptr->addr)]->links--; @@ -338,7 +338,7 @@ void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr) * */ -static void node_established_contact(struct node *n_ptr) +static void node_established_contact(struct tipc_node *n_ptr) { struct cluster *c_ptr; @@ -384,10 +384,10 @@ static void node_established_contact(struct node *n_ptr) tipc_highest_allowed_slave); } -static void node_lost_contact(struct node *n_ptr) +static void node_lost_contact(struct tipc_node *n_ptr) { struct cluster *c_ptr; - struct node_subscr *ns, *tns; + struct tipc_node_subscr *ns, *tns; char addr_string[16]; u32 i; @@ -466,9 +466,9 @@ static void node_lost_contact(struct node *n_ptr) * Called by when cluster local lookup has failed. */ -struct node *tipc_node_select_next_hop(u32 addr, u32 selector) +struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector) { - struct node *n_ptr; + struct tipc_node *n_ptr; u32 router_addr; if (!tipc_addr_domain_valid(addr)) @@ -513,7 +513,7 @@ struct node *tipc_node_select_next_hop(u32 addr, u32 selector) * Uses a deterministic and fair algorithm for selecting router node. */ -u32 tipc_node_select_router(struct node *n_ptr, u32 ref) +u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref) { u32 ulim; u32 mask; @@ -551,7 +551,7 @@ u32 tipc_node_select_router(struct node *n_ptr, u32 ref) return tipc_addr(own_zone(), own_cluster(), r); } -void tipc_node_add_router(struct node *n_ptr, u32 router) +void tipc_node_add_router(struct tipc_node *n_ptr, u32 router) { u32 r_num = tipc_node(router); @@ -562,7 +562,7 @@ void tipc_node_add_router(struct node *n_ptr, u32 router) !n_ptr->routers[n_ptr->last_router]); } -void tipc_node_remove_router(struct node *n_ptr, u32 router) +void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router) { u32 r_num = tipc_node(router); @@ -580,7 +580,7 @@ void tipc_node_remove_router(struct node *n_ptr, u32 router) } #if 0 -void node_print(struct print_buf *buf, struct node *n_ptr, char *str) +void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str) { u32 i; @@ -597,7 +597,7 @@ void node_print(struct print_buf *buf, struct node *n_ptr, char *str) u32 tipc_available_nodes(const u32 domain) { - struct node *n_ptr; + struct tipc_node *n_ptr; u32 cnt = 0; read_lock_bh(&tipc_net_lock); @@ -615,7 +615,7 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space) { u32 domain; struct sk_buff *buf; - struct node *n_ptr; + struct tipc_node *n_ptr; struct tipc_node_info node_info; u32 payload_size; @@ -667,7 +667,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space) { u32 domain; struct sk_buff *buf; - struct node *n_ptr; + struct tipc_node *n_ptr; struct tipc_link_info link_info; u32 payload_size; diff --git a/net/tipc/node.h b/net/tipc/node.h index cd1882654bb..6f990da5d14 100644 --- a/net/tipc/node.h +++ b/net/tipc/node.h @@ -43,7 +43,7 @@ #include "bearer.h" /** - * struct node - TIPC node structure + * struct tipc_node - TIPC node structure * @addr: network address of node * @lock: spinlock governing access to structure * @owner: pointer to cluster that node belongs to @@ -68,11 +68,11 @@ * @defragm: list of partially reassembled b'cast message fragments from node */ -struct node { +struct tipc_node { u32 addr; spinlock_t lock; struct cluster *owner; - struct node *next; + struct tipc_node *next; struct list_head nsub; struct link *active_links[2]; struct link *links[MAX_BEARERS]; @@ -94,26 +94,26 @@ struct node { } bclink; }; -extern struct node *tipc_nodes; +extern struct tipc_node *tipc_nodes; extern u32 tipc_own_tag; -struct node *tipc_node_create(u32 addr); -void tipc_node_delete(struct node *n_ptr); -struct node *tipc_node_attach_link(struct link *l_ptr); -void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr); -void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr); -void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr); -int tipc_node_has_active_links(struct node *n_ptr); -int tipc_node_has_redundant_links(struct node *n_ptr); -u32 tipc_node_select_router(struct node *n_ptr, u32 ref); -struct node *tipc_node_select_next_hop(u32 addr, u32 selector); -int tipc_node_is_up(struct node *n_ptr); -void tipc_node_add_router(struct node *n_ptr, u32 router); -void tipc_node_remove_router(struct node *n_ptr, u32 router); +struct tipc_node *tipc_node_create(u32 addr); +void tipc_node_delete(struct tipc_node *n_ptr); +struct tipc_node *tipc_node_attach_link(struct link *l_ptr); +void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr); +void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr); +void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr); +int tipc_node_has_active_links(struct tipc_node *n_ptr); +int tipc_node_has_redundant_links(struct tipc_node *n_ptr); +u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref); +struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector); +int tipc_node_is_up(struct tipc_node *n_ptr); +void tipc_node_add_router(struct tipc_node *n_ptr, u32 router); +void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router); struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space); struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space); -static inline struct node *tipc_node_find(u32 addr) +static inline struct tipc_node *tipc_node_find(u32 addr) { if (likely(in_own_cluster(addr))) return tipc_local_nodes[tipc_node(addr)]; @@ -126,19 +126,19 @@ static inline struct node *tipc_node_find(u32 addr) return NULL; } -static inline struct node *tipc_node_select(u32 addr, u32 selector) +static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector) { if (likely(in_own_cluster(addr))) return tipc_local_nodes[tipc_node(addr)]; return tipc_node_select_next_hop(addr, selector); } -static inline void tipc_node_lock(struct node *n_ptr) +static inline void tipc_node_lock(struct tipc_node *n_ptr) { spin_lock_bh(&n_ptr->lock); } -static inline void tipc_node_unlock(struct node *n_ptr) +static inline void tipc_node_unlock(struct tipc_node *n_ptr) { spin_unlock_bh(&n_ptr->lock); } diff --git a/net/tipc/node_subscr.c b/net/tipc/node_subscr.c index 8ecbd0fb610..19194d476a9 100644 --- a/net/tipc/node_subscr.c +++ b/net/tipc/node_subscr.c @@ -44,7 +44,7 @@ * tipc_nodesub_subscribe - create "node down" subscription for specified node */ -void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr, +void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr, void *usr_handle, net_ev_handler handle_down) { if (addr == tipc_own_addr) { @@ -69,7 +69,7 @@ void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr, * tipc_nodesub_unsubscribe - cancel "node down" subscription (if any) */ -void tipc_nodesub_unsubscribe(struct node_subscr *node_sub) +void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub) { if (!node_sub->node) return; diff --git a/net/tipc/node_subscr.h b/net/tipc/node_subscr.h index 5f3f5859b84..006ed739f51 100644 --- a/net/tipc/node_subscr.h +++ b/net/tipc/node_subscr.h @@ -42,22 +42,22 @@ typedef void (*net_ev_handler) (void *usr_handle); /** - * struct node_subscr - "node down" subscription entry + * struct tipc_node_subscr - "node down" subscription entry * @node: ptr to node structure of interest (or NULL, if none) * @handle_node_down: routine to invoke when node fails * @usr_handle: argument to pass to routine when node fails * @nodesub_list: adjacent entries in list of subscriptions for the node */ -struct node_subscr { - struct node *node; +struct tipc_node_subscr { + struct tipc_node *node; net_ev_handler handle_node_down; void *usr_handle; struct list_head nodesub_list; }; -void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr, +void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr, void *usr_handle, net_ev_handler handle_down); -void tipc_nodesub_unsubscribe(struct node_subscr *node_sub); +void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub); #endif diff --git a/net/tipc/port.h b/net/tipc/port.h index e5f8c16429b..ff31ee4a1dc 100644 --- a/net/tipc/port.h +++ b/net/tipc/port.h @@ -105,7 +105,7 @@ struct port { u32 probing_interval; u32 last_in_seqno; struct timer_list timer; - struct node_subscr subscription; + struct tipc_node_subscr subscription; }; extern spinlock_t tipc_port_list_lock; diff --git a/net/tipc/zone.c b/net/tipc/zone.c index 3506f856344..2c01ba2d86b 100644 --- a/net/tipc/zone.c +++ b/net/tipc/zone.c @@ -111,10 +111,10 @@ void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest) } } -struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref) +struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref) { struct cluster *c_ptr; - struct node *n_ptr; + struct tipc_node *n_ptr; u32 c_num; if (!z_ptr) diff --git a/net/tipc/zone.h b/net/tipc/zone.h index 6e7a08df8af..7bdc3406ba9 100644 --- a/net/tipc/zone.h +++ b/net/tipc/zone.h @@ -54,7 +54,7 @@ struct _zone { u32 links; }; -struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref); +struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref); u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref); void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router); void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest); From 69114a47af524badc73de8fc86959941a03f0600 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Sep 2008 10:15:26 +0100 Subject: [PATCH 355/638] [ARM] omap: fix gpio.c build error arch/arm/plat-omap/gpio.c: In function '_omap_gpio_init': arch/arm/plat-omap/gpio.c:1492: error: 'omap_mpuio_device' undeclared (first use in this function) Signed-off-by: Russell King --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 3e76ee2bc73..9e1341ebc14 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1488,7 +1488,7 @@ static int __init _omap_gpio_init(void) bank->chip.set = gpio_set; if (bank_is_mpuio(bank)) { bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP1 +#ifdef CONFIG_ARCH_OMAP16XX bank->chip.dev = &omap_mpuio_device.dev; #endif bank->chip.base = OMAP_MPUIO(0); From 78fbc824ed8225edd80cdc57771d5ca4f7aae95e Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 28 Aug 2008 14:57:39 +1000 Subject: [PATCH 356/638] powerpc: Fix uninitialised variable in VSX alignment code This fixes an uninitialised variable in the VSX alignment code. It can cause warnings from GCC (noticed with gcc-4.1.1). Gcc is actually correct in this instance, and this bug could cause the alignment interrupt handler to send a SIGSEGV to the process on a legitimate access. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/align.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 367129789cc..5af4e9b2dbe 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg, unsigned int flags, unsigned int length) { char *ptr = (char *) ¤t->thread.TS_FPR(reg); - int ret; + int ret = 0; flush_vsx_to_thread(current); From 9e88ba4e45ecad2425c4cc4e0861a26f4e36c6da Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sat, 30 Aug 2008 11:26:27 +1000 Subject: [PATCH 357/638] powerpc: Only make kernel text pages of linear mapping executable Commit bc033b63bbfeb6c4b4eb0a1d083c650e4a0d2af8 ("powerpc/mm: Fix attribute confusion with htab_bolt_mapping()") moved the check for whether we should make pages of the linear mapping executable from htab_bolt_mapping into its callers, including htab_initialize. A side-effect of this is that the decision is now made once for each contiguous section in the LMB array rather than for each page individually. This can often mean that the whole of the linear mapping ends up being executable. This reverts to the previous behaviour, where individual pages are checked for being part of the kernel text or not, by moving the check back down into htab_bolt_mapping. Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 14be408dfc9..8920eea3452 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -191,12 +191,17 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr, ssize); unsigned long va = hpt_va(vaddr, vsid, ssize); + unsigned long tprot = prot; + + /* Make kernel text executable */ + if (in_kernel_text(vaddr)) + tprot &= ~HPTE_R_N; hash = hpt_hash(va, shift, ssize); hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); BUG_ON(!ppc_md.hpte_insert); - ret = ppc_md.hpte_insert(hpteg, va, paddr, prot, + ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot, HPTE_V_BOLTED, psize, ssize); if (ret < 0) @@ -584,7 +589,7 @@ void __init htab_initialize(void) { unsigned long table; unsigned long pteg_count; - unsigned long prot, tprot; + unsigned long prot; unsigned long base = 0, size = 0, limit; int i; @@ -660,10 +665,9 @@ void __init htab_initialize(void) for (i=0; i < lmb.memory.cnt; i++) { base = (unsigned long)__va(lmb.memory.region[i].base); size = lmb.memory.region[i].size; - tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0); DBG("creating mapping for region: %lx..%lx (prot: %x)\n", - base, size, tprot); + base, size, prot); #ifdef CONFIG_U3_DART /* Do not map the DART space. Fortunately, it will be aligned @@ -680,21 +684,21 @@ void __init htab_initialize(void) unsigned long dart_table_end = dart_tablebase + 16 * MB; if (base != dart_tablebase) BUG_ON(htab_bolt_mapping(base, dart_tablebase, - __pa(base), tprot, + __pa(base), prot, mmu_linear_psize, mmu_kernel_ssize)); if ((base + size) > dart_table_end) BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB, base + size, __pa(dart_table_end), - tprot, + prot, mmu_linear_psize, mmu_kernel_ssize)); continue; } #endif /* CONFIG_U3_DART */ BUG_ON(htab_bolt_mapping(base, base + size, __pa(base), - tprot, mmu_linear_psize, mmu_kernel_ssize)); + prot, mmu_linear_psize, mmu_kernel_ssize)); } /* From 303996dace16894710a5291327eeb79afdb8ed12 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 2 Sep 2008 15:04:09 +1000 Subject: [PATCH 358/638] powerpc: Make sure _etext is after all kernel text This makes core_kernel_text() (and therefore kernel_text_address()) return the correct result. Currently all the __devinit routines (at least) will not be considered to be kernel text. This is just a quick fix for 2.6.27 - hopefully we will be able to fix this better in 2.6.28. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vmlinux.lds.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 4a8ce62fe11..9f6c1ca1739 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -66,11 +66,12 @@ SECTIONS __got2_end = .; #endif /* CONFIG_PPC32 */ - . = ALIGN(PAGE_SIZE); - _etext = .; - PROVIDE32 (etext = .); } :kernel + . = ALIGN(PAGE_SIZE); + _etext = .; + PROVIDE32 (etext = .); + /* Read-only data */ RODATA From 7563dc64585324f443f5ac107eb6d89ee813a2d2 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 2 Sep 2008 16:50:38 +1000 Subject: [PATCH 359/638] powerpc: Work around gcc's -fno-omit-frame-pointer bug This bug is causing random crashes (http://bugzilla.kernel.org/show_bug.cgi?id=11414). -fno-omit-frame-pointer is only needed on powerpc when -pg is also supplied, and there is a gcc bug that causes incorrect code generation on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack locations below the stack pointer, which is not allowed by the ABI because those locations can and sometimes do get corrupted by an interrupt. This ensures that CONFIG_FRAME_POINTER is only selected by ftrace. When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work around the gcc codegen bug. Patch based on work by: Andreas Schwab Segher Boessenkool Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 5 +++++ arch/powerpc/kernel/Makefile | 7 ++++--- arch/powerpc/platforms/powermac/Makefile | 2 +- lib/Kconfig.debug | 6 +++--- 4 files changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 9155c9312c1..c6be19e9cea 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y) KBUILD_CFLAGS += -mcpu=powerpc endif +# Work around a gcc code-gen bug with -fno-omit-frame-pointer. +ifeq ($(CONFIG_FTRACE),y) +KBUILD_CFLAGS += -mno-sched-epilog +endif + cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 64f5948ebc9..946daea780f 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -14,12 +14,13 @@ endif ifdef CONFIG_FTRACE # Do not trace early boot code -CFLAGS_REMOVE_cputable.o = -pg -CFLAGS_REMOVE_prom_init.o = -pg +CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog +CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog ifdef CONFIG_DYNAMIC_FTRACE # dynamic ftrace setup. -CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog endif endif diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 58ecdd72630..be60d64be7a 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -2,7 +2,7 @@ CFLAGS_bootx_init.o += -fPIC ifdef CONFIG_FTRACE # Do not trace early boot code -CFLAGS_REMOVE_bootx_init.o = -pg +CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog endif obj-y += pic.o setup.o time.o feature.o pci.o \ diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 8b5a7d304a5..0b504814e37 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -394,7 +394,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 && !MIPS + select FRAME_POINTER if !X86 && !MIPS && !PPC select KALLSYMS select KALLSYMS_ALL @@ -676,13 +676,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER + select FRAME_POINTER if !PPC help Provide stacktrace filter for fault-injection capabilities config LATENCYTOP bool "Latency measuring infrastructure" - select FRAME_POINTER if !MIPS + select FRAME_POINTER if !MIPS && !PPC select KALLSYMS select KALLSYMS_ALL select STACKTRACE From 94ee815c05c9387931e549d83312d30009ed86e9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 3 Sep 2008 13:12:05 +1000 Subject: [PATCH 360/638] powerpc: Fix build error with 64K pages and !hugetlbfs HAVE_ARCH_UNMAPPED_AREA and HAVE_ARCH_UNMAPPED_AREA_TOPDOWN must be defined whenever CONFIG_PPC_MM_SLICES is enabled, not just when CONFIG_HUGETLB_PAGE is. They used to be always defined together but this is no longer the case since 3a8247cc2c856930f34eafce33f6a039227ee175 ("powerpc: Only demote individual slices rather than whole process"). Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/pgtable-ppc64.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index db0b8f3b880..4597c491e9b 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -153,12 +153,10 @@ #define __S110 PAGE_SHARED_X #define __S111 PAGE_SHARED_X -#ifdef CONFIG_HUGETLB_PAGE - +#ifdef CONFIG_PPC_MM_SLICES #define HAVE_ARCH_UNMAPPED_AREA #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN - -#endif +#endif /* CONFIG_PPC_MM_SLICES */ #ifndef __ASSEMBLY__ From 7888bc2b4778fda267a6e6422c4497dba865a47a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 26 Aug 2008 12:08:56 +1000 Subject: [PATCH 361/638] powerpc: Fix for getting CPU number in power_save_ppc32_restore() The calculation to get TI_CPU based off of SPRG3 was just plain wrong, meaning that we were getting garbage for the CPU number on 6xx/G3/G4 based SMP boxes in this code. Just offset off the stack pointer (to get to thread_info) like all the other references to TI_CPU do. This was pointed out by Chen Gong [paulus@samba.org - use rlwinm r12,r11,... instead of rlwinm r12,r1,...; tophys()] Signed-off-by: Kumar Gala Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/idle_6xx.S | 2 +- arch/powerpc/kernel/idle_e500.S | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S index 019b02d8844..15c611de1ee 100644 --- a/arch/powerpc/kernel/idle_6xx.S +++ b/arch/powerpc/kernel/idle_6xx.S @@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore) stw r9,_NIP(r11) /* make it do a blr */ #ifdef CONFIG_SMP - mfspr r12,SPRN_SPRG3 + rlwinm r12,r11,0,0,31-THREAD_SHIFT lwz r11,TI_CPU(r12) /* get cpu number * 4 */ slwi r11,r11,2 #else diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S index 06304034b39..47a1a983ff8 100644 --- a/arch/powerpc/kernel/idle_e500.S +++ b/arch/powerpc/kernel/idle_e500.S @@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore) stw r9,_NIP(r11) /* make it do a blr */ #ifdef CONFIG_SMP - mfspr r12,SPRN_SPRG3 + rlwinm r12,r1,0,0,31-THREAD_SHIFT lwz r11,TI_CPU(r12) /* get cpu number * 4 */ slwi r11,r11,2 #else li r11,0 #endif + b transfer_to_handler_cont From 7c7cbadf7341a0792879c67d6e3020f040d6cd7f Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 3 Sep 2008 14:16:42 +0300 Subject: [PATCH 362/638] UBIFS: amend f_fsid David Woodhouse suggested to be consistent with other FSes and xor the beginning and the end of the UUID. Signed-off-by: Artem Bityutskiy --- fs/ubifs/super.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 0dee4042c6c..7562464ac83 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -370,6 +370,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) { struct ubifs_info *c = dentry->d_sb->s_fs_info; unsigned long long free; + __le32 *uuid = (__le32 *)c->uuid; free = ubifs_get_free_space(c); dbg_gen("free space %lld bytes (%lld blocks)", @@ -386,8 +387,8 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_files = 0; buf->f_ffree = 0; buf->f_namelen = UBIFS_MAX_NLEN; - memcpy(&buf->f_fsid, c->uuid, sizeof(__kernel_fsid_t)); - + buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]); + buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]); return 0; } From e000ea13123a28108cff2d6b9856b414dfdcd1fa Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 2 Sep 2008 11:34:24 -0700 Subject: [PATCH 363/638] net/usb/pegasus: avoid hundreds of diagnostics Make the "pegasus" driver scream less loudly in the face of problems as it initializes, avoiding hundreds of messages: - ratelimit some key error messages - avoid some spurious diagnostics caused by strange codeflow And fix one instance of goofy indentation. Signed-off-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/usb/pegasus.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index a84ba487c71..8c19307e504 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -117,7 +117,7 @@ static void ctrl_callback(struct urb *urb) case -ENOENT: break; default: - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_dbg(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, urb->status); } @@ -166,7 +166,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size, set_current_state(TASK_RUNNING); if (ret == -ENODEV) netif_device_detach(pegasus->net); - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_err(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, ret); goto out; @@ -275,7 +275,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data) if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) { if (ret == -ENODEV) netif_device_detach(pegasus->net); - if (netif_msg_drv(pegasus)) + if (netif_msg_drv(pegasus) && printk_ratelimit()) dev_err(&pegasus->intf->dev, "%s, status %d\n", __FUNCTION__, ret); goto out; @@ -1209,8 +1209,7 @@ static void pegasus_set_multicast(struct net_device *net) pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS; if (netif_msg_link(pegasus)) pr_info("%s: Promiscuous mode enabled.\n", net->name); - } else if (net->mc_count || - (net->flags & IFF_ALLMULTI)) { + } else if (net->mc_count || (net->flags & IFF_ALLMULTI)) { pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST; pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS; if (netif_msg_link(pegasus)) @@ -1220,6 +1219,8 @@ static void pegasus_set_multicast(struct net_device *net) pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS; } + pegasus->ctrl_urb->status = 0; + pegasus->flags |= ETH_REGS_CHANGE; ctrl_callback(pegasus->ctrl_urb); } From 15e79f24b60c4b0bf8019423bda4e03a576b02f2 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 27 Aug 2008 18:04:32 -0700 Subject: [PATCH 364/638] ixgbe: initialize interrupt throttle rate This commit dropped the setting of the default interrupt throttle rate. commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25 Author: Ayyappan Veeraiyan Date: Mon Mar 3 15:03:45 2008 -0800 ixgbe: Introduce MSI-X queue vector code The following patch adds it back. Without this the default value of 0 causes the performance of this card to be awful. Restoring these to the default values yields much better performance. This regression has been around since 2.6.25. Signed-off-by: Andy Gospodarek Acked-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher CC: stable@kernel.org [2.6.25 and later] Signed-off-by: Jeff Garzik --- drivers/net/ixgbe/ixgbe_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 53f41b649f0..a417be7f8be 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2303,6 +2303,12 @@ static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter int err = 0; int vector, v_budget; + /* + * Set the default interrupt throttle rate. + */ + adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS); + adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS); + /* * It's easy to be greedy for MSI-X vectors, but it really * doesn't do us much good if we have a lot more vectors From 2dcc9ff7efc701f76883356bdbaf1134039e5fa5 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 30 Aug 2008 12:13:33 +0900 Subject: [PATCH 365/638] pcnet-cs, axnet_cs: add new IDs, remove dup ID with less info pcnet_cs: add new ID: "corega Ether PCC-TD". remove duplicate ID: "IC-CARD". axnet_cs: add new ID: "IO DATA ETXPCM". Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/axnet_cs.c | 1 + drivers/net/pcmcia/pcnet_cs.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 3f682d49a4e..52bf11b73c6 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -784,6 +784,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e), PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90), + PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2d4c4ad89b8..ebc1ae6bcbe 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1626,6 +1626,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa), + PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83), PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9), PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2), PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2), @@ -1737,7 +1738,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360), PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de), PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f), - PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6), PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a), PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078), /* too generic! */ From 0b62afb432d807482a6808508112d1baf29f3798 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 27 Aug 2008 21:57:30 -0700 Subject: [PATCH 366/638] netxen: Remove workaround for chipset quirk Remove chipset-specific quirk workaround; the workaround caused unrecoverable DMA lockups when the driver was loaded following a PXE boot. Signed-off-by: Dhananjay Phadke Signed-off-by: Michael Brown Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_main.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 32bb47adbe3..008fd6618a5 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -359,16 +359,6 @@ static void netxen_pcie_strap_init(struct netxen_adapter *adapter) int i, pos; struct pci_dev *pdev; - pdev = pci_get_device(0x1166, 0x0140, NULL); - if (pdev) { - pci_dev_put(pdev); - adapter->hw_read_wx(adapter, - NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4); - chicken |= 0x4000; - adapter->hw_write_wx(adapter, - NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4); - } - pdev = adapter->pdev; adapter->hw_read_wx(adapter, From ec0c15afb41fd9ad45b53468b60db50170e22346 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 3 Sep 2008 07:30:13 -0700 Subject: [PATCH 367/638] Split up PIT part of TSC calibration from native_calibrate_tsc The TSC calibration function is still very complicated, but this makes it at least a little bit less so by moving the PIT part out into a helper function of its own. Tested-by: Larry Finger Signed-of-by: Linus Torvalds --- arch/x86/kernel/tsc.c | 132 +++++++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 61 deletions(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index ac79bd143da..346cae5ac42 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -122,15 +122,75 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet) return ULLONG_MAX; } +/* + * Try to calibrate the TSC against the Programmable + * Interrupt Timer and return the frequency of the TSC + * in kHz. + * + * Return ULONG_MAX on failure to calibrate. + */ +static unsigned long pit_calibrate_tsc(void) +{ + u64 tsc, t1, t2, delta; + unsigned long tscmin, tscmax; + int pitcnt; + + /* Set the Gate high, disable speaker */ + outb((inb(0x61) & ~0x02) | 0x01, 0x61); + + /* + * Setup CTC channel 2* for mode 0, (interrupt on terminal + * count mode), binary count. Set the latch register to 50ms + * (LSB then MSB) to begin countdown. + */ + outb(0xb0, 0x43); + outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); + outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); + + tsc = t1 = t2 = get_cycles(); + + pitcnt = 0; + tscmax = 0; + tscmin = ULONG_MAX; + while ((inb(0x61) & 0x20) == 0) { + t2 = get_cycles(); + delta = t2 - tsc; + tsc = t2; + if ((unsigned long) delta < tscmin) + tscmin = (unsigned int) delta; + if ((unsigned long) delta > tscmax) + tscmax = (unsigned int) delta; + pitcnt++; + } + + /* + * Sanity checks: + * + * If we were not able to read the PIT more than 5000 + * times, then we have been hit by a massive SMI + * + * If the maximum is 10 times larger than the minimum, + * then we got hit by an SMI as well. + */ + if (pitcnt < 5000 || tscmax > 10 * tscmin) + return ULONG_MAX; + + /* Calculate the PIT value */ + delta = t2 - t1; + do_div(delta, 50); + return delta; +} + + /** * native_calibrate_tsc - calibrate the tsc on boot */ unsigned long native_calibrate_tsc(void) { - u64 tsc1, tsc2, tr1, tr2, tsc, delta, pm1, pm2, hpet1, hpet2; + u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2; unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; - unsigned long flags, tscmin, tscmax; - int hpet = is_hpet_enabled(), pitcnt, i; + unsigned long flags; + int hpet = is_hpet_enabled(), i; /* * Run 5 calibration loops to get the lowest frequency value @@ -157,72 +217,22 @@ unsigned long native_calibrate_tsc(void) * amount of time anyway. */ for (i = 0; i < 5; i++) { - - tscmin = ULONG_MAX; - tscmax = 0; - pitcnt = 0; - - local_irq_save(flags); + unsigned long tsc_pit_khz; /* * Read the start value and the reference count of - * hpet/pmtimer when available: + * hpet/pmtimer when available. Then do the PIT + * calibration, which will take at least 50ms, and + * read the end value. */ + local_irq_save(flags); tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL); - - /* Set the Gate high, disable speaker */ - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - /* - * Setup CTC channel 2* for mode 0, (interrupt on terminal - * count mode), binary count. Set the latch register to 50ms - * (LSB then MSB) to begin countdown. - * - * Some devices need a delay here. - */ - outb(0xb0, 0x43); - outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42); - outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42); - - tsc = tr1 = tr2 = get_cycles(); - - while ((inb(0x61) & 0x20) == 0) { - tr2 = get_cycles(); - delta = tr2 - tsc; - tsc = tr2; - if ((unsigned int) delta < tscmin) - tscmin = (unsigned int) delta; - if ((unsigned int) delta > tscmax) - tscmax = (unsigned int) delta; - pitcnt++; - } - - /* - * We waited at least 50ms above. Now read - * pmtimer/hpet reference again - */ + tsc_pit_khz = pit_calibrate_tsc(); tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL); - local_irq_restore(flags); - /* - * Sanity checks: - * - * If we were not able to read the PIT more than 5000 - * times, then we have been hit by a massive SMI - * - * If the maximum is 10 times larger than the minimum, - * then we got hit by an SMI as well. - */ - if (pitcnt > 5000 && tscmax < 10 * tscmin) { - - /* Calculate the PIT value */ - delta = tr2 - tr1; - do_div(delta, 50); - - /* We take the smallest value into account */ - tsc_pit_min = min(tsc_pit_min, (unsigned long) delta); - } + /* Pick the lowest PIT TSC calibration so far */ + tsc_pit_min = min(tsc_pit_min, tsc_pit_khz); /* hpet or pmtimer available ? */ if (!hpet && !pm1 && !pm2) From b94d8eea44df985ea22b1f51e402b4bbfdd6d793 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Wed, 3 Sep 2008 11:18:42 +0800 Subject: [PATCH 368/638] iwlwifi: W/A for the TSF correction in IBSS This patch is a W/A for the TSF sync issue in IBSS merging. HW is not capable to sync TSF (it's constantly little behind). This creates constant IBSS merging upon reception of each beacon, adding and removing station which in turn creates above 50% packet loss and thus dramatically degrade the throughput. The W/A simply stops the driver from declaring it has a reliable TSF value and thus eliminates IBSS merging. Signed-off-by: Assaf Krauss Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +- drivers/net/wireless/iwlwifi/iwl-rx.c | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c0b73c4d6f4..2afa1fb052e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3588,7 +3588,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk priv->assoc_id = 0; timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000); + priv->timestamp = le64_to_cpu(timestamp); IWL_DEBUG_MAC80211("leave\n"); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index f3f6ea49fdd..e81bfc42a7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -1173,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.antenna = 0; rx_status.flag = 0; - rx_status.flag |= RX_FLAG_TSFT; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_TSFT;*/ if ((unlikely(rx_start->cfg_phy_cnt > 20))) { IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", From 0ffe014a8c548f88694815ae7b25d6e86550917e Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Wed, 3 Sep 2008 11:18:43 +0800 Subject: [PATCH 369/638] iwlwifi: fix hidden ssid discovery in passive channels This enables sending of direct probes on passive channels, as long as traffic was detected on that channel. This enables connectivity to hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW declares all 5.2 spectrum as passive. Signed-off-by: Cahill Ben Signed-off-by: Tomas Winkler Signed-off-by: Ron Rindjunsky Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 9bb6adb28b7..6c8ac3a87d5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -421,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, else scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes) + if (n_probes) scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); From 545597036caefd4b438731abaca902efe004b1b4 Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Wed, 3 Sep 2008 11:18:44 +0800 Subject: [PATCH 370/638] iwlwifi: remove false rxon if rx chain changes Rx chain might change during power save transitions but it doesn't require sending Full-ROXN command to the firmware. Full-RXON requires reconnection to an AP and thus affects user experience. The patch avoids the Full-RXON by removing the rx_chain modification check in iwl_full_rxon_required function. Signed-off-by: Mohamed Abbas Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 2afa1fb052e..a5feb0cc982 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -181,14 +181,14 @@ static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) } /** - * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed * @priv: staging_rxon is compared to active_rxon * * If the RXON structure is changing enough to require a new tune, * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. */ -static int iwl4965_full_rxon_required(struct iwl_priv *priv) +static int iwl_full_rxon_required(struct iwl_priv *priv) { /* These items are only settable from the full RXON command */ @@ -207,7 +207,6 @@ static int iwl4965_full_rxon_required(struct iwl_priv *priv) priv->active_rxon.ofdm_ht_single_stream_basic_rates) || (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) return 1; @@ -263,7 +262,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) /* If we don't need to send a full RXON, we can use * iwl4965_rxon_assoc_cmd which is used to reconfigure filter * and other flags for the current radio configuration. */ - if (!iwl4965_full_rxon_required(priv)) { + if (!iwl_full_rxon_required(priv)) { ret = iwl_send_rxon_assoc(priv); if (ret) { IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); From 4834c73f055b92f719a23e29e275559fa8c29513 Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Wed, 3 Sep 2008 11:18:46 +0800 Subject: [PATCH 371/638] iwlwifi: fix station mimo power save values This patch fixes the wrong use MIMO power save values. Our TX was configured with our MIMO power save values instead of peer's MIMO power save values, this may affect connectivity. The peer STA/AP may not sense our traffic at all as it doesn't have all RX chains opened. Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 -- drivers/net/wireless/iwlwifi/iwl-dev.h | 1 - 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 754fef5b592..90a2b6dee7c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1153,7 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) + if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) + == IWL_MIMO_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index a5feb0cc982..34928c8ed20 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -586,8 +586,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = 0; } - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); iwl_conf->control_channel = ht_bss_conf->primary_channel; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c19db438306..cdfb343c7ec 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -412,7 +412,6 @@ struct iwl_ht_info { /* self configuration data */ u8 is_ht; u8 supported_chan_width; - u16 tx_mimo_ps_mode; u8 is_green_field; u8 sgf; /* HT_SHORT_GI_* short guard interval */ u8 max_amsdu_size; From 28a6b07a14bd5e63af2c0304306f35c5b963910b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:18:47 +0800 Subject: [PATCH 372/638] iwlwifi: fix rx_chain computation This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: Tomas Winkler Signed-off-by: Mohamed Abbas Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 75 +++++++++++++++---------- 1 file changed, 45 insertions(+), 30 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index c72f72579be..80f2f84defa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv) clear_bit(STATUS_GEO_CONFIGURED, &priv->status); } -static u8 is_single_rx_stream(struct iwl_priv *priv) +static bool is_single_rx_stream(struct iwl_priv *priv) { return !priv->current_ht_config.is_ht || ((priv->current_ht_config.supp_mcs_set[1] == 0) && - (priv->current_ht_config.supp_mcs_set[2] == 0)) || - priv->ps_mode == IWL_MIMO_PS_STATIC; + (priv->current_ht_config.supp_mcs_set[2] == 0)); } static u8 iwl_is_channel_extension(struct iwl_priv *priv, @@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht); * MIMO (dual stream) requires at least 2, but works better with 3. * This does not determine *which* chains to use, just how many. */ -static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; + return 2; else - *rx_state = 3; + return 3; +} +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + int idle_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ switch (priv->ps_mode) { case IWL_MIMO_PS_STATIC: case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; + idle_cnt = (is_cam) ? 2 : 1; break; case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; + idle_cnt = (is_cam) ? active_cnt : 1; break; + case IWL_MIMO_PS_INVALID: default: - *idle_state = 1; + IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + WARN_ON(1); + idle_cnt = -1; break; } - - return 0; + return idle_cnt; } /** @@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, */ void iwl_set_rxon_chain(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt; + u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->hw_params.valid_rx_ant << - RXON_RX_CHAIN_VALID_POS); + rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ - iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) + /* correct rx chain count accoridng hw settings */ + if (priv->hw_params.rx_chains_num < active_rx_cnt) + active_rx_cnt = priv->hw_params.rx_chains_num; + + if (priv->hw_params.rx_chains_num < idle_rx_cnt) + idle_rx_cnt = priv->hw_params.rx_chains_num; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= 2) && is_cam) priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; else priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); + IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + priv->staging_rxon.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); } EXPORT_SYMBOL(iwl_set_rxon_chain); From 73b7d742519ab4cc1b7a12c7af15187fc0ede8e7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:18:48 +0800 Subject: [PATCH 373/638] iwlwifi: fix Tx cmd memory allocation failure handling This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation only for memory under 16M which causes allocation problems suspend/resume flows. Using kmalloc is temporal solution and some consistent/coherent allocation schema will be more correct. Since iwlwifi hardware supports 64bit address this solution should work on x86 (32 and 64bit) for now. This patch fixes memory freeing problem in the previous patch. Signed-off-by: Tomas Winkler Signed-off-by: Ian Schram Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index ff879d46624..78b1a7a4ca4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -402,12 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv, /** * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue */ -static int iwl_tx_queue_init(struct iwl_priv *priv, - struct iwl_tx_queue *txq, +static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { int i, len; - int rc = 0; + int ret; /* * Alloc buffer array for commands (Tx or other types of commands). @@ -428,17 +427,14 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, txq->cmd[i] = kmalloc(len, GFP_KERNEL); if (!txq->cmd[i]) - return -ENOMEM; + goto err; } /* Alloc driver data array and TFD circular buffer */ - rc = iwl_tx_queue_alloc(priv, txq, txq_id); - if (rc) { - for (i = 0; i < slots_num; i++) - kfree(txq->cmd[i]); + ret = iwl_tx_queue_alloc(priv, txq, txq_id); + if (ret) + goto err; - return -ENOMEM; - } txq->need_update = 0; /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise @@ -452,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, iwl_hw_tx_queue_init(priv, txq); return 0; +err: + for (i = 0; i < slots_num; i++) { + kfree(txq->cmd[i]); + txq->cmd[i] = NULL; + } + + if (txq_id == IWL_CMD_QUEUE_NUM) { + kfree(txq->cmd[slots_num]); + txq->cmd[slots_num] = NULL; + } + return -ENOMEM; } /** * iwl_hw_txq_ctx_free - Free TXQ Context From d535311ecbba0d692b5f1278b8bcb2581c3482e0 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Wed, 3 Sep 2008 11:18:49 +0800 Subject: [PATCH 374/638] iwlwifi: call apm stop on exit This patch calls apm stop on exit and suspend. Without this patch hardware consumes power even after driver is removed or suspended. Signed-off-by: Gregory Greenman Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 34928c8ed20..4e3d6c7fd6d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2187,7 +2187,10 @@ static void __iwl4965_down(struct iwl_priv *priv) udelay(5); /* FIXME: apm_ops.suspend(priv) */ - priv->cfg->ops->lib->apm_ops.reset(priv); + if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status)) + priv->cfg->ops->lib->apm_ops.stop(priv); + else + priv->cfg->ops->lib->apm_ops.reset(priv); priv->cfg->ops->lib->free_shared_mem(priv); exit: From 0b124c31838bcf0459708aa91ce859582c7d3ca1 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Wed, 3 Sep 2008 11:18:50 +0800 Subject: [PATCH 375/638] iwlwifi: fix STATUS_EXIT_PENDING is not set on pci_remove This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise iwl4965_down may fail to uninitialize the driver. Signed-off-by: Gregory Greenman Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 4e3d6c7fd6d..e01f048a02d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -4372,15 +4372,18 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) iwl_dbgfs_unregister(priv); sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to + * to be called and iwl4965_down since we are removing the device + * we need to set STATUS_EXIT_PENDING bit. + */ + set_bit(STATUS_EXIT_PENDING, &priv->status); if (priv->mac80211_registered) { ieee80211_unregister_hw(priv->hw); priv->mac80211_registered = 0; + } else { + iwl4965_down(priv); } - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl4965_down(priv); - /* make sure we flush any pending irq or * tasklet for the driver */ From 43f30ae0a6308fd5b862ee7851feca1fc18c72d0 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:49 +0300 Subject: [PATCH 376/638] ath9k: Fix TX status reporting Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 95b33714948..c5107f269f2 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1067,8 +1067,16 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags) - tx_info->status.excessive_retries = 1; + + if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + /* Frame was not ACKed, but an ACK was expected */ + tx_info->status.excessive_retries = 1; + } + } else { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; + } tx_info->status.retry_count = tx_status->retries; From 9aab3e3ee6f256a1eaabc275e0748132966f963d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:51 +0300 Subject: [PATCH 377/638] ath9k: Fix TX control flag use for no ACK and RTS/CTS Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/xmit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 157f830ee6b..550129f717e 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -357,9 +357,9 @@ static int ath_tx_prepare(struct ath_softc *sc, txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) - tx_info->flags |= ATH9K_TXDESC_NOACK; + txctl->flags |= ATH9K_TXDESC_NOACK; if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) - tx_info->flags |= ATH9K_TXDESC_RTSENA; + txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. From 2e7acd75cba3b7afa4007f20f22a86dbbdb21753 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:35 -0300 Subject: [PATCH 378/638] V4L/DVB (8555): au8522: add mechanism to configure IF frequency for vsb and qam Add a mechanism to configure IF frequency for vsb and qam. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/au8522.c | 66 ++++++++++++++++++++++++++++ drivers/media/dvb/frontends/au8522.h | 9 ++++ 2 files changed, 75 insertions(+) diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index f7b71657f0f..5741bc93079 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -304,6 +304,70 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, return ret; } +/* 3.25 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_3_25_mhz_tab[] = { + { 0x80b5, 0x00 }, + { 0x80b6, 0x3d }, + { 0x80b7, 0xa0 }, +}; + +/* 4.00 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_4_mhz_tab[] = { + { 0x80b5, 0x00 }, + { 0x80b6, 0x4b }, + { 0x80b7, 0xd9 }, +}; + +/* 6.00 MHz IF Frequency table */ +static struct { + u16 reg; + u16 data; +} if_6_mhz_tab[] = { + { 0x80b5, 0xfb }, + { 0x80b6, 0x8e }, + { 0x80b7, 0x39 }, +}; + +static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq) +{ + struct au8522_state *state = fe->demodulator_priv; + int i; + + switch (if_freq) { + case AU8522_IF_3_25MHZ: + dprintk("%s() 3.25 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++) + au8522_writereg(state, + if_3_25_mhz_tab[i].reg, + if_3_25_mhz_tab[i].data); + break; + case AU8522_IF_4MHZ: + dprintk("%s() 4.00 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++) + au8522_writereg(state, + if_4_mhz_tab[i].reg, + if_4_mhz_tab[i].data); + break; + case AU8522_IF_6MHZ: + dprintk("%s() 6.00 MHz\n", __func__); + for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++) + au8522_writereg(state, + if_6_mhz_tab[i].reg, + if_6_mhz_tab[i].data); + break; + default: + dprintk("%s() IF Frequency not supported\n", __func__); + return -EINVAL; + } + return 0; +} + /* VSB Modulation table */ static struct { u16 reg; @@ -438,6 +502,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe, au8522_writereg(state, VSB_mod_tab[i].reg, VSB_mod_tab[i].data); + au8522_set_if(fe, state->config->vsb_if); break; case QAM_64: case QAM_256: @@ -446,6 +511,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe, au8522_writereg(state, QAM_mod_tab[i].reg, QAM_mod_tab[i].data); + au8522_set_if(fe, state->config->qam_if); break; default: dprintk("%s() Invalid modulation\n", __func__); diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h index d7affa3cdb2..afc9af26e7a 100644 --- a/drivers/media/dvb/frontends/au8522.h +++ b/drivers/media/dvb/frontends/au8522.h @@ -24,6 +24,12 @@ #include +enum au8522_if_freq { + AU8522_IF_6MHZ = 0, + AU8522_IF_4MHZ, + AU8522_IF_3_25MHZ, +}; + struct au8522_config { /* the demodulator's i2c address */ u8 demod_address; @@ -32,6 +38,9 @@ struct au8522_config { #define AU8522_TUNERLOCKING 0 #define AU8522_DEMODLOCKING 1 u8 status_mode; + + enum au8522_if_freq vsb_if; + enum au8522_if_freq qam_if; }; #if defined(CONFIG_DVB_AU8522) || \ From 8e8bd229eef385ab420d4fa51c611d4ddc7cb0c8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:36 -0300 Subject: [PATCH 379/638] V4L/DVB (8556): au0828: add support for Hauppauge Woodbury Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.au0828 | 1 + drivers/media/video/au0828/Kconfig | 1 + drivers/media/video/au0828/au0828-cards.c | 7 +++++++ drivers/media/video/au0828/au0828-cards.h | 1 + drivers/media/video/au0828/au0828-dvb.c | 21 +++++++++++++++++++++ 5 files changed, 31 insertions(+) diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index eedc399e8de..aa05e5bb22f 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -3,3 +3,4 @@ 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] 4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281] + 5 -> Hauppauge Woodbury (au0828) [2040:8200] diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index ed9a50f189f..018f72b8e3e 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -7,6 +7,7 @@ config VIDEO_AU0828 select DVB_AU8522 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Auvitek's USB device. diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 443e5900976..14b9fc9bb62 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = { [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", }, + [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { + .name = "Hauppauge Woodbury", + }, }; /* Tuner callback function for au0828 boards. Currently only needed @@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: if (dev->i2c_rc == 0) hauppauge_eeprom(dev, eeprom+0xa0); break; @@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev) case AU0828_BOARD_HAUPPAUGE_HVR850: case AU0828_BOARD_HAUPPAUGE_HVR950Q: case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL: + case AU0828_BOARD_HAUPPAUGE_WOODBURY: /* GPIO's * 4 - CS5340 * 5 - AU8522 Demodulator @@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x7281), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, + { USB_DEVICE(0x2040, 0x8200), + .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, { }, }; diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h index c37f5fd0fa8..102ed03dc6b 100644 --- a/drivers/media/video/au0828/au0828-cards.h +++ b/drivers/media/video/au0828/au0828-cards.h @@ -24,3 +24,4 @@ #define AU0828_BOARD_HAUPPAUGE_HVR850 2 #define AU0828_BOARD_DVICO_FUSIONHDTV7 3 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL 4 +#define AU0828_BOARD_HAUPPAUGE_WOODBURY 5 diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index 584a83a94a2..c862f9e4d2f 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -29,6 +29,7 @@ #include "au8522.h" #include "xc5000.h" #include "mxl5007t.h" +#include "tda18271.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -40,6 +41,13 @@ static struct au8522_config hauppauge_hvr950q_config = { .status_mode = AU8522_DEMODLOCKING, }; +static struct au8522_config hauppauge_woodbury_config = { + .demod_address = 0x8e >> 1, + .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_4MHZ, + .vsb_if = AU8522_IF_3_25MHZ, +}; + static struct xc5000_config hauppauge_hvr950q_tunerconfig = { .i2c_address = 0x61, .if_khz = 6000, @@ -51,6 +59,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = { .if_freq_hz = MxL_IF_6_MHZ, }; +static struct tda18271_config hauppauge_woodbury_tunerconfig = { + .gate = TDA18271_GATE_DIGITAL, +}; + /*-------------------------------------------------------------------*/ static void urb_completion(struct urb *purb) { @@ -357,6 +369,15 @@ int au0828_dvb_register(struct au0828_dev *dev) &dev->i2c_adap, 0x60, &mxl5007t_hvr950q_config); break; + case AU0828_BOARD_HAUPPAUGE_WOODBURY: + dvb->frontend = dvb_attach(au8522_attach, + &hauppauge_woodbury_config, + &dev->i2c_adap); + if (dvb->frontend != NULL) + dvb_attach(tda18271_attach, dvb->frontend, + 0x60, &dev->i2c_adap, + &hauppauge_woodbury_tunerconfig); + break; default: printk(KERN_WARNING "The frontend of your DVB/ATSC card " "isn't supported yet\n"); From df76de098de0118cdcf6ec0e60cb4063837f8def Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:40 -0300 Subject: [PATCH 380/638] V4L/DVB (8598): au8522: clean up function au8522_set_if re-write this function to make it simpler Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/au8522.c | 65 ++++++++-------------------- 1 file changed, 19 insertions(+), 46 deletions(-) diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 5741bc93079..92c8fbe0d6c 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -304,67 +304,40 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse, return ret; } -/* 3.25 MHz IF Frequency table */ -static struct { - u16 reg; - u16 data; -} if_3_25_mhz_tab[] = { - { 0x80b5, 0x00 }, - { 0x80b6, 0x3d }, - { 0x80b7, 0xa0 }, -}; - -/* 4.00 MHz IF Frequency table */ -static struct { - u16 reg; - u16 data; -} if_4_mhz_tab[] = { - { 0x80b5, 0x00 }, - { 0x80b6, 0x4b }, - { 0x80b7, 0xd9 }, -}; - -/* 6.00 MHz IF Frequency table */ -static struct { - u16 reg; - u16 data; -} if_6_mhz_tab[] = { - { 0x80b5, 0xfb }, - { 0x80b6, 0x8e }, - { 0x80b7, 0x39 }, -}; - static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq) { struct au8522_state *state = fe->demodulator_priv; - int i; + u8 r0b5, r0b6, r0b7; + char *ifmhz; switch (if_freq) { case AU8522_IF_3_25MHZ: - dprintk("%s() 3.25 MHz\n", __func__); - for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++) - au8522_writereg(state, - if_3_25_mhz_tab[i].reg, - if_3_25_mhz_tab[i].data); + ifmhz = "3.25"; + r0b5 = 0x00; + r0b6 = 0x3d; + r0b7 = 0xa0; break; case AU8522_IF_4MHZ: - dprintk("%s() 4.00 MHz\n", __func__); - for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++) - au8522_writereg(state, - if_4_mhz_tab[i].reg, - if_4_mhz_tab[i].data); + ifmhz = "4.00"; + r0b5 = 0x00; + r0b6 = 0x4b; + r0b7 = 0xd9; break; case AU8522_IF_6MHZ: - dprintk("%s() 6.00 MHz\n", __func__); - for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++) - au8522_writereg(state, - if_6_mhz_tab[i].reg, - if_6_mhz_tab[i].data); + ifmhz = "6.00"; + r0b5 = 0xfb; + r0b6 = 0x8e; + r0b7 = 0x39; break; default: dprintk("%s() IF Frequency not supported\n", __func__); return -EINVAL; } + dprintk("%s() %s MHz\n", __func__, ifmhz); + au8522_writereg(state, 0x80b5, r0b5); + au8522_writereg(state, 0x80b6, r0b6); + au8522_writereg(state, 0x80b7, r0b7); + return 0; } From 3e3e2a8f1f6837a4f29b1416db40c88d846ab066 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:41 -0300 Subject: [PATCH 381/638] V4L/DVB (8599): au8522: remove if frequency settings from vsb/qam modulation tables Since IF frequency is set after the vsb/qam modulation tables are written, remove the redundant register settings from the vsb/qam modulation tables. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/au8522.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 92c8fbe0d6c..5a6cbb47627 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -371,9 +371,6 @@ static struct { { 0x80af, 0x66 }, { 0x821b, 0xcc }, { 0x821d, 0x80 }, - { 0x80b5, 0xfb }, - { 0x80b6, 0x8e }, - { 0x80b7, 0x39 }, { 0x80a4, 0xe8 }, { 0x8231, 0x13 }, }; @@ -387,9 +384,6 @@ static struct { { 0x80a4, 0x00 }, { 0x8081, 0xc4 }, { 0x80a5, 0x40 }, - { 0x80b5, 0xfb }, - { 0x80b6, 0x8e }, - { 0x80b7, 0x39 }, { 0x80aa, 0x77 }, { 0x80ad, 0x77 }, { 0x80a6, 0x67 }, From e908b6e34c1b799c830cae5f8e721f80534f9748 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:46:43 -0300 Subject: [PATCH 382/638] V4L/DVB (8600): au0828: explicitly set 6 MHz IF frequency in hauppauge_hvr950q_config Explicitly set 6 MHz IF frequency for VSB and QAM in hauppauge_hvr950q_config. The default value is 6 MHz, so this patch doesn't change anything -- this only improves code readability and may prevent future bugs. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-dvb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index c862f9e4d2f..194865380ce 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -39,6 +39,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static struct au8522_config hauppauge_hvr950q_config = { .demod_address = 0x8e >> 1, .status_mode = AU8522_DEMODLOCKING, + .qam_if = AU8522_IF_6MHZ, + .vsb_if = AU8522_IF_6MHZ, }; static struct au8522_config hauppauge_woodbury_config = { From 888fe747b5d134e2f3b5c2d3ecc25e1c6dcad4c3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 16:46:50 -0300 Subject: [PATCH 383/638] V4L/DVB (8629): v4l2-ioctl: do not try to handle private V4L1 ioctls Some drivers (e.g. zoran) have private V4L1 ioctls. Do not try to pass them to v4l1_compat_translate because then the driver will never see them. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index fdfe7739c96..88c0465aede 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -674,7 +674,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, __video_do_ioctl will be called again, with one or more V4L2 ioctls. ********************************************************/ - if (_IOC_TYPE(cmd) == 'v') + if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE) return v4l_compat_translate_ioctl(inode, file, cmd, arg, __video_do_ioctl); #endif From c58dc0beaf70bce4d04ff53b82a7035a255a04e4 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 16:46:58 -0300 Subject: [PATCH 384/638] V4L/DVB (8633): ivtv: update ivtv version number Since for 2.6.27 ivtvfb uses DMA for write it is important that you can identify which ivtv version supports this and which doesn't. Increase the version number so we can tell the difference. Thanks to Ian Armstrong for pointing this out to me. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index 442f43f11b7..8cd753d30bf 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,7 +22,7 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 3 +#define IVTV_DRIVER_VERSION_MINOR 4 #define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) From d526afe06b285006c63ed8f2eba9589f04e3283a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 16:47:14 -0300 Subject: [PATCH 385/638] V4L/DVB (8648): ivtv: improve CC support - change the work-queue to a single threaded high prio workqueue - use DMA instead of PIO for the sliced VBI data. - remove some incorrect tests - increase the internal VBI capture queue size for sliced VBI packets - ignore duplicate VBI lines With these changes it should finally be possible to get reliable closed captions. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 2 +- drivers/media/video/ivtv/ivtv-driver.h | 1 + drivers/media/video/ivtv/ivtv-irq.c | 29 +++++++------------------ drivers/media/video/ivtv/ivtv-queue.h | 2 +- drivers/media/video/ivtv/ivtv-streams.c | 2 +- drivers/media/video/ivtv/ivtv-vbi.c | 4 +++- 6 files changed, 15 insertions(+), 25 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index aea1664948c..4afc7ea07e8 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -688,7 +688,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) spin_lock_init(&itv->lock); spin_lock_init(&itv->dma_reg_lock); - itv->irq_work_queues = create_workqueue(itv->name); + itv->irq_work_queues = create_singlethread_workqueue(itv->name); if (itv->irq_work_queues == NULL) { IVTV_ERR("Could not create ivtv workqueue\n"); return -1; diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index ab287b48fc2..2ceb5227637 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -251,6 +251,7 @@ struct ivtv_mailbox_data { #define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */ #define IVTV_F_I_INITED 21 /* set after first open */ #define IVTV_F_I_FAILED 22 /* set if first open failed */ +#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */ /* Event notifications */ #define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */ diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index fba150a6cd2..34f3ab82785 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -76,6 +76,13 @@ void ivtv_irq_work_handler(struct work_struct *work) DEFINE_WAIT(wait); + if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) { + struct sched_param param = { .sched_priority = 99 }; + + /* This thread must use the FIFO scheduler as it + is realtime sensitive. */ + sched_setscheduler(current, SCHED_FIFO, ¶m); + } if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags)) ivtv_pio_work_handler(itv); @@ -678,34 +685,14 @@ static void ivtv_irq_enc_start_cap(struct ivtv *itv) static void ivtv_irq_enc_vbi_cap(struct ivtv *itv) { - struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG]; u32 data[CX2341X_MBOX_MAX_DATA]; struct ivtv_stream *s; IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n"); s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI]; - /* If more than two VBI buffers are pending, then - clear the old ones and start with this new one. - This can happen during transition stages when MPEG capturing is - started, but the first interrupts haven't arrived yet. During - that period VBI requests can accumulate without being able to - DMA the data. Since at most four VBI DMA buffers are available, - we just drop the old requests when there are already three - requests queued. */ - if (s->sg_pending_size > 2) { - struct ivtv_buffer *buf; - list_for_each_entry(buf, &s->q_predma.list, list) - ivtv_buf_sync_for_cpu(s, buf); - ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0); - s->sg_pending_size = 0; - } - /* if we can append the data, and the MPEG stream isn't capturing, - then start a DMA request for just the VBI data. */ - if (!stream_enc_dma_append(s, data) && - !test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) { + if (!stream_enc_dma_append(s, data)) set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags); - } } static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv) diff --git a/drivers/media/video/ivtv/ivtv-queue.h b/drivers/media/video/ivtv/ivtv-queue.h index 7cfc0c9ab05..476556afd39 100644 --- a/drivers/media/video/ivtv/ivtv-queue.h +++ b/drivers/media/video/ivtv/ivtv-queue.h @@ -23,7 +23,7 @@ #define IVTV_QUEUE_H #define IVTV_DMA_UNMAPPED ((u32) -1) -#define SLICED_VBI_PIO 1 +#define SLICED_VBI_PIO 0 /* ivtv_buffer utility functions */ diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 54d2023b26c..730e85d86fc 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -363,7 +363,7 @@ static void ivtv_vbi_setup(struct ivtv *itv) /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */ data[1] = 1; /* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */ - data[2] = raw ? 4 : 8; + data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size); /* The start/stop codes determine which VBI lines end up in the raw VBI data area. The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video) diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c index 71798f0da27..1ce9deb1104 100644 --- a/drivers/media/video/ivtv/ivtv-vbi.c +++ b/drivers/media/video/ivtv/ivtv-vbi.c @@ -293,6 +293,7 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8 u32 line_size = itv->vbi.sliced_decoder_line_size; struct v4l2_decode_vbi_line vbi; int i; + unsigned lines = 0; /* find the first valid line */ for (i = 0; i < size; i++, buf++) { @@ -313,7 +314,8 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8 } vbi.p = p + 4; itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi); - if (vbi.type) { + if (vbi.type && !(lines & (1 << vbi.line))) { + lines |= 1 << vbi.line; itv->vbi.sliced_data[line].id = vbi.type; itv->vbi.sliced_data[line].field = vbi.is_second_field; itv->vbi.sliced_data[line].line = vbi.line; From e52a5574de9d3bb297a26566871eabcbdfab13b5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:21 -0300 Subject: [PATCH 386/638] V4L/DVB (8660): gspca: Simplify the scan of URB packets in pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 206 +++++++++++++++------------- 1 file changed, 110 insertions(+), 96 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 815bea6edc4..caa33292a08 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -40,7 +40,8 @@ struct sd { unsigned char colors; unsigned char autogain; - char ffseq; + char ffnb; /* number of 'ff' in the previous frame */ + char tosof; /* number of bytes before next start of frame */ signed char ag_cnt; #define AG_CNT_START 13 }; @@ -335,6 +336,10 @@ static int sd_open(struct gspca_dev *gspca_dev) static void sd_start(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + sd->ffnb = 0; + sd->tosof = 0; reg_w(gspca_dev, 0xff, 0x01); reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8); reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8); @@ -511,114 +516,123 @@ static void do_autogain(struct gspca_dev *gspca_dev) } } +/* output the jpeg header */ +static void put_jpeg_head(struct gspca_dev *gspca_dev, + struct gspca_frame *frame) +{ + unsigned char tmpbuf[4]; + + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + (__u8 *) pac7311_jpeg_header, + 12); + tmpbuf[0] = gspca_dev->height >> 8; + tmpbuf[1] = gspca_dev->height & 0xff; + tmpbuf[2] = gspca_dev->width >> 8; + tmpbuf[3] = gspca_dev->width & 0xff; + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + tmpbuf, 4); + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + (__u8 *) &pac7311_jpeg_header[16], + PAC7311_JPEG_HEADER_SIZE - 16); +} + +/* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - unsigned char tmpbuf[4]; - int i, p, ffseq; + int i; -/* if (len < 5) { */ - if (len < 6) { -/* gspca_dev->last_packet_type = DISCARD_PACKET; */ - return; +#define INTER_FRAME 0x53 +#define LUM_OFFSET 0x1e /* reverse offset / start of frame */ + + /* + * inside a frame, there may be: + * escaped ff ('ff 00') + * sequences'ff ff ff xx' to remove + * end of frame ('ff d9') + * at the end of frame, there are: + * ff d9 end of frame + * 0x33 bytes + * one byte luminosity + * 0x16 bytes + * ff ff 00 ff 96 62 44 start of frame header + */ + + if (sd->tosof == 0) { /* if inside a frame */ + + /* check for 'ff ff ff xx' at start and at end of packet */ + /* (len is always >= 3) */ + switch (sd->ffnb) { + case 1: + if (data[0] != 0xff) + break; /* keep 'ff 00' */ + /* fall thru */ + case 2: + case 3: + data += 4 - sd->ffnb; + len -= 4 - sd->ffnb; + sd->ffnb = 0; + break; + } + if (data[len - 1] == 0xff) { + if (data[len - 2] == 0xff) { + if (data[len - 3] == 0xff) { + sd->ffnb = 3; + len -= 3; + } else { + sd->ffnb = 2; + len -= 2; + } + } else { + sd->ffnb = 1; + len--; + } + } + } else { /* outside a frame */ + + /* + * get the luminosity + * and go to the start of frame + */ + data += sd->tosof; + len -= sd->tosof; + if (sd->tosof > LUM_OFFSET) + sd->lum_sum += data[-LUM_OFFSET]; + put_jpeg_head(gspca_dev, frame); + sd->tosof = 0; } - ffseq = sd->ffseq; - - for (p = 0; p < len - 6; p++) { - if ((data[0 + p] == 0xff) - && (data[1 + p] == 0xff) - && (data[2 + p] == 0x00) - && (data[3 + p] == 0xff) - && (data[4 + p] == 0x96)) { - - /* start of frame */ - if (sd->ag_cnt >= 0 && p > 28) { - sd->lum_sum += data[p - 23]; - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - atomic_set(&sd->avg_lum, - sd->lum_sum / AG_CNT_START); - sd->lum_sum = 0; - atomic_set(&sd->do_gain, 1); - } + for (i = 0; i < len; i++) { + if (data[i] != 0xff) + continue; + switch (data[i + 1]) { + case 0xd9: /* end of frame */ + frame = gspca_frame_add(gspca_dev, + LAST_PACKET, + frame, data, i + 1); + data += INTER_FRAME; + len -= INTER_FRAME; + i = 0; + if (len > LUM_OFFSET) + sd->lum_sum += data[-LUM_OFFSET]; + if (len < 0) { + sd->tosof = -len; + break; } - - /* copy the end of data to the current frame */ - frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, - data, p); - - /* put the JPEG header in the new frame */ - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, - (unsigned char *) pac7311_jpeg_header, - 12); - tmpbuf[0] = gspca_dev->height >> 8; - tmpbuf[1] = gspca_dev->height & 0xff; - tmpbuf[2] = gspca_dev->width >> 8; - tmpbuf[3] = gspca_dev->width & 0xff; - gspca_frame_add(gspca_dev, INTER_PACKET, frame, - tmpbuf, 4); - gspca_frame_add(gspca_dev, INTER_PACKET, frame, - (unsigned char *) &pac7311_jpeg_header[16], - PAC7311_JPEG_HEADER_SIZE - 16); - - data += p + 7; - len -= p + 7; - ffseq = 0; + put_jpeg_head(gspca_dev, frame); + break; + case 0xff: /* 'ff ff ff xx' */ + gspca_frame_add(gspca_dev, INTER_PACKET, + frame, data, i); + data += i + 4; + len -= i + 4; + i = 0; break; } } - - /* remove the 'ff ff ff xx' sequences */ - switch (ffseq) { - case 3: - data += 1; - len -= 1; - break; - case 2: - if (data[0] == 0xff) { - data += 2; - len -= 2; - frame->data_end -= 2; - } - break; - case 1: - if (data[0] == 0xff - && data[1] == 0xff) { - data += 3; - len -= 3; - frame->data_end -= 1; - } - break; - } - for (i = 0; i < len - 4; i++) { - if (data[i] == 0xff - && data[i + 1] == 0xff - && data[i + 2] == 0xff) { - memmove(&data[i], &data[i + 4], len - i - 4); - len -= 4; - } - } - ffseq = 0; - if (data[len - 4] == 0xff) { - if (data[len - 3] == 0xff - && data[len - 2] == 0xff) { - len -= 4; - } - } else if (data[len - 3] == 0xff) { - if (data[len - 2] == 0xff - && data[len - 1] == 0xff) - ffseq = 3; - } else if (data[len - 2] == 0xff) { - if (data[len - 1] == 0xff) - ffseq = 2; - } else if (data[len - 1] == 0xff) - ffseq = 1; - sd->ffseq = ffseq; - gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } static void getbrightness(struct gspca_dev *gspca_dev) From 23d9e4776b426d1f8a602e0e8d868154847f0dd4 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:22 -0300 Subject: [PATCH 387/638] V4L/DVB (8661): gspca: Bug in the previous changeset about pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index caa33292a08..96cd7f644ad 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -610,13 +610,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, continue; switch (data[i + 1]) { case 0xd9: /* end of frame */ + i += 2; frame = gspca_frame_add(gspca_dev, LAST_PACKET, - frame, data, i + 1); - data += INTER_FRAME; - len -= INTER_FRAME; + frame, data, i); + data += i + INTER_FRAME; + len -= i + INTER_FRAME; i = 0; - if (len > LUM_OFFSET) + if (len > -LUM_OFFSET) sd->lum_sum += data[-LUM_OFFSET]; if (len < 0) { sd->tosof = -len; From d2d16e9084ee44088974c3312b803d54dd9b46d7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:23 -0300 Subject: [PATCH 388/638] V4L/DVB (8663): gspca: Webcam 0c45:6128 added in sonixj. Patch adapted from a patch to gspcav1 made by the google microdia group. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/sonixj.c | 128 ++++++++++++++++++++++++---- 2 files changed, 112 insertions(+), 17 deletions(-) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 78a863ab8a5..c7fc9fa8bec 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -220,6 +220,7 @@ sonixj 0c45:60c0 Sangha Sn535 sonixj 0c45:60ec SN9C105+MO4000 sonixj 0c45:60fb Surfer NoName sonixj 0c45:60fc LG-LIC300 +sonixj 0c45:6128 Microdia/Sonix SNP325 sonixj 0c45:612a Avant Camera sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix sonixj 0c45:6130 Sonix Pccam diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 245a30ec5fb..151e1b625b0 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -54,8 +54,9 @@ struct sd { #define SENSOR_HV7131R 0 #define SENSOR_MI0360 1 #define SENSOR_MO4000 2 -#define SENSOR_OV7648 3 -#define SENSOR_OV7660 4 +#define SENSOR_OM6802 3 +#define SENSOR_OV7648 4 +#define SENSOR_OV7660 5 unsigned char i2c_base; }; @@ -180,6 +181,20 @@ static const __u8 sn_mo4000[] = { 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; +static const __u8 sn_om6802[] = { +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x23, 0x72, 0x00, 0x1a, 0x34, 0x27, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x80, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x51, 0x01, 0x00, 0x28, 0x1e, 0x40, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x22, 0x44, 0x63, 0x7d, 0x92, 0xa3, 0xaf, + 0xbc, 0xc4, 0xcd, 0xd5, 0xdc, 0xe1, 0xe8, 0xef, + 0xf7 +}; + static const __u8 sn_ov7648[] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, @@ -207,6 +222,7 @@ static const __u8 *sn_tb[] = { sn_hv7131, sn_mi0360, sn_mo4000, + sn_om6802, sn_ov7648, sn_ov7660 }; @@ -340,6 +356,40 @@ static const __u8 mo4000_sensor_init[][8] = { {0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10}, {} }; +static __u8 om6802_sensor_init[][8] = { + {0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10}, + {0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10}, +/* {0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */ + {0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10}, + /* white balance & auto-exposure */ +/* {0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10}, + * set color mode */ +/* {0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10}, + * max AGC value in AE */ +/* {0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset AGC */ +/* {0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset brightness */ +/* {0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10}, + * preset contrast */ +/* {0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10}, + * preset gamma */ + {0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10}, + /* luminance mode (0x4f = AE) */ + {0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10}, + /* preset shutter */ +/* {0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10}, + * auto frame rate */ +/* {0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */ + +/* {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */ +/* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */ + {} +}; static const __u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */ /* (delay 20ms) */ @@ -685,8 +735,14 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f); - switch (sd->bridge) { - case BRIDGE_SN9C325: + switch (sd->sensor) { + case SENSOR_OM6802: + reg_w1(gspca_dev, 0x02, 0x71); + reg_w1(gspca_dev, 0x01, 0x42); + reg_w1(gspca_dev, 0x17, 0x64); + reg_w1(gspca_dev, 0x01, 0x42); + break; + case SENSOR_OV7648: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0xae); reg_w1(gspca_dev, 0x01, 0x42); @@ -695,11 +751,11 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0x61); reg_w1(gspca_dev, 0x01, 0x42); - } - - if (sd->sensor == SENSOR_HV7131R) { - if (probesensor(gspca_dev) < 0) - return -ENODEV; + if (sd->sensor == SENSOR_HV7131R) { + if (probesensor(gspca_dev) < 0) + return -ENODEV; + } + break; } return 0; } @@ -737,6 +793,16 @@ static void mo4000_InitSensor(struct gspca_dev *gspca_dev) } } +static void om6802_InitSensor(struct gspca_dev *gspca_dev) +{ + int i = 0; + + while (om6802_sensor_init[i][0]) { + i2c_w8(gspca_dev, om6802_sensor_init[i]); + i++; + } +} + static void ov7648_InitSensor(struct gspca_dev *gspca_dev) { int i = 0; @@ -891,6 +957,20 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, | ((expoMo10[3] & 0x30) >> 4)); break; } + case SENSOR_OM6802: { + __u8 gainOm[] = + { 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 }; + + if (expo > 0x03ff) + expo = 0x03ff; + if (expo < 0x0001) + expo = 0x0001; + gainOm[3] = expo >> 2; + i2c_w8(gspca_dev, gainOm); + reg_w1(gspca_dev, 0x96, expo >> 5); + PDEBUG(D_CONF, "set exposure %d", gainOm[3]); + break; + } } return expo; } @@ -901,6 +981,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) unsigned int expo; __u8 k2; + k2 = sd->brightness >> 10; switch (sd->sensor) { case SENSOR_HV7131R: expo = sd->brightness << 4; @@ -915,9 +996,13 @@ static void setbrightness(struct gspca_dev *gspca_dev) expo = sd->brightness >> 4; sd->exposure = setexposure(gspca_dev, expo); break; + case SENSOR_OM6802: + expo = sd->brightness >> 6; + sd->exposure = setexposure(gspca_dev, expo); + k2 = sd->brightness >> 11; + break; } - k2 = sd->brightness >> 10; reg_w1(gspca_dev, 0x96, k2); } @@ -1049,6 +1134,11 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg1 = 0x06; * 640 clk 24Mz (done) */ } break; + case SENSOR_OM6802: + om6802_InitSensor(gspca_dev); + reg1 = 0x46; /* 640 clk 24Mz */ + reg17 = 0x64; /* 640 MCKSIZE */ + break; case SENSOR_OV7648: ov7648_InitSensor(gspca_dev); reg17 = 0xa2; @@ -1174,6 +1264,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) default: /* case SENSOR_MO4000: */ /* case SENSOR_MI0360: */ +/* case SENSOR_OM6802: */ expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) @@ -1246,7 +1337,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) i2c_r5(gspca_dev, 0x09); return (gspca_dev->usb_buf[0] << 8) | gspca_dev->usb_buf[1]; - case SENSOR_MO4000: + default: +/* case SENSOR_MO4000: */ i2c_r5(gspca_dev, 0x0e); hexpo = 0; /* gspca_dev->usb_buf[1] & 0x07; */ mexpo = 0x40; /* gspca_dev->usb_buf[2] & 0xff; */ @@ -1254,7 +1346,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) PDEBUG(D_CONF, "exposure %d", (hexpo << 10) | (mexpo << 2) | lexpo); return (hexpo << 10) | (mexpo << 2) | lexpo; - default: +#if 0 +/*jfm: not called*/ /* case SENSOR_OV7648: * jfm: is it ok for 7648? */ /* case SENSOR_OV7660: */ /* read sensor exposure */ @@ -1264,7 +1357,9 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) i2c_r5(gspca_dev, 0x08); mexpo = gspca_dev->usb_buf[2]; return (hexpo << 10) | (mexpo << 2) | lexpo; +#endif } + /* not reached */ } static void getbrightness(struct gspca_dev *gspca_dev) @@ -1277,9 +1372,8 @@ static void getbrightness(struct gspca_dev *gspca_dev) sd->brightness = getexposure(gspca_dev) >> 4; break; case SENSOR_MI0360: - sd->brightness = getexposure(gspca_dev) << 4; - break; case SENSOR_MO4000: + case SENSOR_OM6802: sd->brightness = getexposure(gspca_dev) << 4; break; } @@ -1406,9 +1500,9 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */ - {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)}, -/* bw600.inf: - {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */ + {USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/ +/*bw600.inf:*/ + {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/ {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)}, /* {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */ /* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */ From 49b57dba2f6425e9b42874b4dec2433b335fa69c Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:25 -0300 Subject: [PATCH 389/638] V4L/DVB (8664): gspca: The bridge/sensor of the webcam 093a:2621 is a PAC 7302. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 418 +++++++++++++++++++--------- 1 file changed, 294 insertions(+), 124 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 96cd7f644ad..034c00d6c0a 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -44,6 +44,10 @@ struct sd { char tosof; /* number of bytes before next start of frame */ signed char ag_cnt; #define AG_CNT_START 13 + + __u8 sensor; +#define SENSOR_PAC7302 0 +#define SENSOR_PAC7311 1 }; /* V4L2 controls supported by the driver */ @@ -206,9 +210,158 @@ static const __u8 pac7311_jpeg_header[] = { 0x11, 0x00, 0x3f, 0x00 }; +/* pac 7302 */ +static const __u8 probe_7302[] = { +/* index,value */ + 0xff, 0x01, /* page 1 */ + 0x78, 0x00, /* deactivate */ + 0xff, 0x01, + 0x78, 0x40, /* led off */ +}; +static const __u8 start_7302[] = { +/* index, len, [value]* */ + 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80, + 0x00, 0x00, 0x00, 0x00, + 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00, + 0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7, + 0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11, + 0x26, 2, 0xaa, 0xaa, + 0x2e, 1, 0x31, + 0x38, 1, 0x01, + 0x3a, 3, 0x14, 0xff, 0x5a, + 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11, + 0x00, 0x54, 0x11, + 0x55, 1, 0x00, + 0x62, 4, 0x10, 0x1e, 0x1e, 0x18, + 0x6b, 1, 0x00, + 0x6e, 3, 0x08, 0x06, 0x00, + 0x72, 3, 0x00, 0xff, 0x00, + 0x7d, 23, 0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c, + 0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50, + 0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00, + 0xa2, 10, 0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9, + 0xd2, 0xeb, + 0xaf, 1, 0x02, + 0xb5, 2, 0x08, 0x08, + 0xb8, 2, 0x08, 0x88, + 0xc4, 4, 0xae, 0x01, 0x04, 0x01, + 0xcc, 1, 0x00, + 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9, + 0xc1, 0xd7, 0xec, + 0xdc, 1, 0x01, + 0xff, 1, 0x01, + 0x12, 3, 0x02, 0x00, 0x01, + 0x3e, 2, 0x00, 0x00, + 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2, + 0x7c, 1, 0x00, + 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20, + 0x02, 0x00, + 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04, + 0xc8, 17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, + 0x07, 0x00, 0x01, 0x07, 0x04, 0x01, + 0x01, + 0xdb, 2, 0x00, 0x01, + 0xde, 8, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00, + 0xe6, 4, 0x00, 0x00, 0x00, 0x01, + 0xeb, 1, 0x00, + 0xff, 1, 0x02, + 0x22, 1, 0x00, + 0xff, 1, 0x03, + 0x00, 255, /* load the page 3 */ + 0x11, 1, 0x01, + 0xff, 1, 0x02, + 0x13, 1, 0x00, + 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96, + 0x27, 2, 0x14, 0x0c, + 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22, + 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44, + 0x6e, 1, 0x08, + 0xff, 1, 0x03, + 0x78, 1, 0x00, + 0, 0 /* end of sequence */ +}; + +/* page 3 - the value 0xaa says skip the index - see reg_w_page() */ +static const __u8 page3_7302[] = { + 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16, + 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00, + 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00, + 0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21, + 0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54, + 0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00, + 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8, + 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, + 0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00, + 0x00 +}; + +/* pac 7311 */ +static const __u8 probe_7311[] = { + 0x78, 0x40, /* Bit_0=start stream, Bit_7=LED */ + 0x78, 0x40, /* Bit_0=start stream, Bit_7=LED */ + 0x78, 0x44, /* Bit_0=start stream, Bit_7=LED */ + 0xff, 0x04, + 0x27, 0x80, + 0x28, 0xca, + 0x29, 0x53, + 0x2a, 0x0e, + 0xff, 0x01, + 0x3e, 0x20, +}; + +static const __u8 start_7311[] = { +/* index, len, [value]* */ + 0xff, 1, 0x01, + 0x02, 53, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00, + 0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c, + 0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, + 0x3e, 52, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e, + 0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49, + 0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48, + 0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78, + 0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b, + 0xd0, 0xff, + 0x78, 6, 0x44, 0x00, 0xf2, 0x01, 0x01, 0x80, + 0x7f, 18, 0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84, + 0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14, + 0x18, 0x20, + 0x96, 3, 0x01, 0x08, 0x04, + 0xa0, 4, 0x44, 0x44, 0x44, 0x04, + 0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00, + 0x3f, 0x00, 0x0a, 0x01, 0x00, + 0xff, 1, 0x04, + 0x00, 254, /* load the page 4 */ + 0x11, 1, 0x01, + 0, 0 /* end of sequence */ +}; + +/* page 4 - the value 0xaa says skip the index - see reg_w_page() */ +static const __u8 page4_7311[] = { + 0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f, + 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62, + 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa, + 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x01, + 0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00, + 0x23, 0x28, 0x04, 0x11, 0x00, 0x00 +}; + static void reg_w_buf(struct gspca_dev *gspca_dev, - __u16 index, - const char *buffer, __u16 len) + __u8 index, + const char *buffer, int len) { memcpy(gspca_dev->usb_buf, buffer, len); usb_control_msg(gspca_dev->dev, @@ -221,7 +374,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, } static __u8 reg_r(struct gspca_dev *gspca_dev, - __u16 index) + __u8 index) { usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), @@ -234,7 +387,7 @@ static __u8 reg_r(struct gspca_dev *gspca_dev, } static void reg_w(struct gspca_dev *gspca_dev, - __u16 index, + __u8 index, __u8 value) { gspca_dev->usb_buf[0] = value; @@ -246,6 +399,74 @@ static void reg_w(struct gspca_dev *gspca_dev, 500); } +static void reg_w_seq(struct gspca_dev *gspca_dev, + const __u8 *seq, int len) +{ + while (--len >= 0) { + reg_w(gspca_dev, seq[0], seq[1]); + seq += 2; + } +} + +/* load the beginning of a page */ +static void reg_w_page(struct gspca_dev *gspca_dev, + const __u8 *page, int len) +{ + int index; + + for (index = 0; index < len; index++) { + if (page[index] == 0xaa) /* skip this index */ + continue; + gspca_dev->usb_buf[0] = page[index]; + usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0, /* request */ + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, index, gspca_dev->usb_buf, 1, + 500); + } +} + +/* output a variable sequence */ +static void reg_w_var(struct gspca_dev *gspca_dev, + const __u8 *seq) +{ + int index, len; + + for (;;) { + index = *seq++; + len = *seq++; + switch (len) { + case 0: + return; + case 254: + reg_w_page(gspca_dev, page4_7311, sizeof page4_7311); + break; + case 255: + reg_w_page(gspca_dev, page3_7302, sizeof page3_7302); + break; + default: + if (len > 32) { + PDEBUG(D_ERR|D_STREAM, + "Incorrect variable sequence"); + return; + } + while (len > 0) { + if (len < 8) { + reg_w_buf(gspca_dev, index, seq, len); + seq += len; + break; + } + reg_w_buf(gspca_dev, index, seq, 8); + seq += 8; + index += 8; + len -= 8; + } + } + } + /* not reached */ +} + /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) @@ -253,22 +474,23 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; - PDEBUG(D_CONF, "Find Sensor PAC7311"); - reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x27, 0x80); - reg_w(gspca_dev, 0x28, 0xca); - reg_w(gspca_dev, 0x29, 0x53); - reg_w(gspca_dev, 0x2a, 0x0e); - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x3e, 0x20); - cam = &gspca_dev->cam; cam->epaddr = 0x05; - cam->cam_mode = vga_mode; - cam->nmodes = ARRAY_SIZE(vga_mode); + + sd->sensor = id->driver_info; + if (sd->sensor == SENSOR_PAC7302) { + PDEBUG(D_CONF, "Find Sensor PAC7302"); + reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302); + + cam->cam_mode = &vga_mode[2]; /* only 640x480 */ + cam->nmodes = 1; + } else { + PDEBUG(D_CONF, "Find Sensor PAC7311"); + reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302); + + cam->cam_mode = vga_mode; + cam->nmodes = ARRAY_SIZE(vga_mode); + } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; @@ -283,10 +505,11 @@ static void setbrightness(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int brightness; + if (sd->sensor == SENSOR_PAC7302) + return; /*jfm: inverted?*/ brightness = BRIGHTNESS_MAX - sd->brightness; reg_w(gspca_dev, 0xff, 0x04); -/* reg_w(gspca_dev, 0x0e, 0x00); */ reg_w(gspca_dev, 0x0f, brightness); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); @@ -297,6 +520,8 @@ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->sensor == SENSOR_PAC7302) + return; reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x80, sd->contrast); /* load registers to sensor (Bit 0, auto clear) */ @@ -308,6 +533,8 @@ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (sd->sensor == SENSOR_PAC7302) + return; reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x10, sd->colors); /* load registers to sensor (Bit 0, auto clear) */ @@ -340,75 +567,12 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->ffnb = 0; sd->tosof = 0; - reg_w(gspca_dev, 0xff, 0x01); - reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8); - reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8); - reg_w_buf(gspca_dev, 0x0012, "\x00\x07\x00\x0a\x10\x00\xa0\x10", 8); - reg_w_buf(gspca_dev, 0x001a, "\x02\x00\x00\x00\x00\x0b\x01\x00", 8); - reg_w_buf(gspca_dev, 0x0022, "\x00\x00\x00\x00\x00\x00\x00\x00", 8); - reg_w_buf(gspca_dev, 0x002a, "\x00\x00\x00", 3); - reg_w_buf(gspca_dev, 0x003e, "\x00\x00\x78\x52\x4a\x52\x78\x6e", 8); - reg_w_buf(gspca_dev, 0x0046, "\x48\x46\x48\x6e\x5f\x49\x42\x49", 8); - reg_w_buf(gspca_dev, 0x004e, "\x5f\x5f\x49\x42\x49\x5f\x6e\x48", 8); - reg_w_buf(gspca_dev, 0x0056, "\x46\x48\x6e\x78\x52\x4a\x52\x78", 8); - reg_w_buf(gspca_dev, 0x005e, "\x00\x00\x09\x1b\x34\x49\x5c\x9b", 8); - reg_w_buf(gspca_dev, 0x0066, "\xd0\xff", 2); - reg_w_buf(gspca_dev, 0x0078, "\x44\x00\xf2\x01\x01\x80", 6); - reg_w_buf(gspca_dev, 0x007f, "\x2a\x1c\x00\xc8\x02\x58\x03\x84", 8); - reg_w_buf(gspca_dev, 0x0087, "\x12\x00\x1a\x04\x08\x0c\x10\x14", 8); - reg_w_buf(gspca_dev, 0x008f, "\x18\x20", 2); - reg_w_buf(gspca_dev, 0x0096, "\x01\x08\x04", 3); - reg_w_buf(gspca_dev, 0x00a0, "\x44\x44\x44\x04", 4); - reg_w_buf(gspca_dev, 0x00f0, "\x01\x00\x00\x00\x22\x00\x20\x00", 8); - reg_w_buf(gspca_dev, 0x00f8, "\x3f\x00\x0a\x01\x00", 5); - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x04); - reg_w(gspca_dev, 0x03, 0x54); - reg_w(gspca_dev, 0x04, 0x07); - reg_w(gspca_dev, 0x05, 0x2b); - reg_w(gspca_dev, 0x06, 0x09); - reg_w(gspca_dev, 0x07, 0x0f); - reg_w(gspca_dev, 0x08, 0x09); - reg_w(gspca_dev, 0x09, 0x00); - reg_w(gspca_dev, 0x0c, 0x07); - reg_w(gspca_dev, 0x0d, 0x00); - reg_w(gspca_dev, 0x0e, 0x00); - reg_w(gspca_dev, 0x0f, 0x62); - reg_w(gspca_dev, 0x10, 0x08); - reg_w(gspca_dev, 0x12, 0x07); - reg_w(gspca_dev, 0x13, 0x00); - reg_w(gspca_dev, 0x14, 0x00); - reg_w(gspca_dev, 0x15, 0x00); - reg_w(gspca_dev, 0x16, 0x00); - reg_w(gspca_dev, 0x17, 0x00); - reg_w(gspca_dev, 0x18, 0x00); - reg_w(gspca_dev, 0x19, 0x00); - reg_w(gspca_dev, 0x1a, 0x00); - reg_w(gspca_dev, 0x1b, 0x03); - reg_w(gspca_dev, 0x1c, 0xa0); - reg_w(gspca_dev, 0x1d, 0x01); - reg_w(gspca_dev, 0x1e, 0xf4); - reg_w(gspca_dev, 0x21, 0x00); - reg_w(gspca_dev, 0x22, 0x08); - reg_w(gspca_dev, 0x24, 0x03); - reg_w(gspca_dev, 0x26, 0x00); - reg_w(gspca_dev, 0x27, 0x01); - reg_w(gspca_dev, 0x28, 0xca); - reg_w(gspca_dev, 0x29, 0x10); - reg_w(gspca_dev, 0x2a, 0x06); - reg_w(gspca_dev, 0x2b, 0x78); - reg_w(gspca_dev, 0x2c, 0x00); - reg_w(gspca_dev, 0x2d, 0x00); - reg_w(gspca_dev, 0x2e, 0x00); - reg_w(gspca_dev, 0x2f, 0x00); - reg_w(gspca_dev, 0x30, 0x23); - reg_w(gspca_dev, 0x31, 0x28); - reg_w(gspca_dev, 0x32, 0x04); - reg_w(gspca_dev, 0x33, 0x11); - reg_w(gspca_dev, 0x34, 0x00); - reg_w(gspca_dev, 0x35, 0x00); - reg_w(gspca_dev, 0x11, 0x01); + if (sd->sensor == SENSOR_PAC7302) + reg_w_var(gspca_dev, start_7302); + else + reg_w_var(gspca_dev, start_7311); + setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); @@ -416,7 +580,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { - case 2: /* 160x120 */ + case 2: /* 160x120 pac7311 */ reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); @@ -426,7 +590,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg_w(gspca_dev, 0x80, 0x69); */ reg_w(gspca_dev, 0x87, 0x10); break; - case 1: /* 320x240 */ + case 1: /* 320x240 pac7311 */ reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); @@ -436,6 +600,8 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x87, 0x11); break; case 0: /* 640x480 */ + if (sd->sensor == SENSOR_PAC7302) + break; reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); @@ -448,12 +614,25 @@ static void sd_start(struct gspca_dev *gspca_dev) /* start stream */ reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x78, 0x04); - reg_w(gspca_dev, 0x78, 0x05); + if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0x78, 0x01); + reg_w(gspca_dev, 0xff, 0x01); + reg_w(gspca_dev, 0x78, 0x01); + } else { + reg_w(gspca_dev, 0x78, 0x04); + reg_w(gspca_dev, 0x78, 0x05); + } } static void sd_stopN(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0x78, 0x00); + reg_w(gspca_dev, 0x78, 0x00); + return; + } reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x27, 0x80); reg_w(gspca_dev, 0x28, 0xca); @@ -468,21 +647,17 @@ static void sd_stopN(struct gspca_dev *gspca_dev) static void sd_stop0(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0xff, 0x01); + reg_w(gspca_dev, 0x78, 0x40); + } } /* this function is called at close time */ static void sd_close(struct gspca_dev *gspca_dev) { - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x27, 0x80); - reg_w(gspca_dev, 0x28, 0xca); - reg_w(gspca_dev, 0x29, 0x53); - reg_w(gspca_dev, 0x2a, 0x0e); - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x3e, 0x20); - reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ } static void do_autogain(struct gspca_dev *gspca_dev) @@ -509,10 +684,17 @@ static void do_autogain(struct gspca_dev *gspca_dev) else if (Gbright < 4) Gbright = 4; PDEBUG(D_FRAM, "gbright %d", Gbright); - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x0f, Gbright); - /* load registers to sensor (Bit 0, auto clear) */ - reg_w(gspca_dev, 0x11, 0x01); + if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0xff, 0x03); + reg_w(gspca_dev, 0x10, Gbright); + /* load registers to sensor (Bit 0, auto clear) */ + reg_w(gspca_dev, 0x11, 0x01); + } else { + reg_w(gspca_dev, 0xff, 0x04); + reg_w(gspca_dev, 0x0f, Gbright); + /* load registers to sensor (Bit 0, auto clear) */ + reg_w(gspca_dev, 0x11, 0x01); + } } } @@ -636,15 +818,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } } -static void getbrightness(struct gspca_dev *gspca_dev) -{ -/* sd->brightness = reg_r(gspca_dev, 0x08); - return sd->brightness; */ -/* PDEBUG(D_CONF, "Called pac7311_getbrightness: Not implemented yet"); */ -} - - - static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -659,7 +832,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - getbrightness(gspca_dev); *val = sd->brightness; return 0; } @@ -678,7 +850,6 @@ static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; -/* getcontrast(gspca_dev); */ *val = sd->contrast; return 0; } @@ -697,7 +868,6 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; -/* getcolors(gspca_dev); */ *val = sd->colors; return 0; } @@ -737,13 +907,13 @@ static struct sd_desc sd_desc = { /* -- module initialisation -- */ static __devinitdata struct usb_device_id device_table[] = { - {USB_DEVICE(0x093a, 0x2600)}, - {USB_DEVICE(0x093a, 0x2601)}, - {USB_DEVICE(0x093a, 0x2603)}, - {USB_DEVICE(0x093a, 0x2608)}, - {USB_DEVICE(0x093a, 0x260e)}, - {USB_DEVICE(0x093a, 0x260f)}, - {USB_DEVICE(0x093a, 0x2621)}, + {USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, + {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); From 9d5c1251bfc10a0e864352f45e272331f65b3420 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:26 -0300 Subject: [PATCH 390/638] V4L/DVB (8665): gspca: Fix the 640x480 resolution of the webcam 093a:2621. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 151e1b625b0..0a20db87a47 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1136,7 +1136,6 @@ static void sd_start(struct gspca_dev *gspca_dev) break; case SENSOR_OM6802: om6802_InitSensor(gspca_dev); - reg1 = 0x46; /* 640 clk 24Mz */ reg17 = 0x64; /* 640 MCKSIZE */ break; case SENSOR_OV7648: From 8559e8da31f37e2916195f44bbe79a61008782df Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:27 -0300 Subject: [PATCH 391/638] V4L/DVB (8666): gspca: Bad scanning of frames in pac7311. The previous change in packet scanning did not work, Also, autogain was no more treated at interrupt level. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 33 ++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 034c00d6c0a..730b4a1aed9 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -702,8 +702,16 @@ static void do_autogain(struct gspca_dev *gspca_dev) static void put_jpeg_head(struct gspca_dev *gspca_dev, struct gspca_frame *frame) { + struct sd *sd = (struct sd *) gspca_dev; unsigned char tmpbuf[4]; + if (sd->ag_cnt >= 0) { + if (--sd->ag_cnt < 0) { + sd->ag_cnt = AG_CNT_START; + atomic_set(&sd->avg_lum, sd->lum_sum / AG_CNT_START); + atomic_set(&sd->do_gain, 1); + } + } gspca_frame_add(gspca_dev, FIRST_PACKET, frame, (__u8 *) pac7311_jpeg_header, 12); @@ -727,7 +735,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; int i; -#define INTER_FRAME 0x53 +#define INTER_FRAME 0x53 /* eof + inter frame + sof */ #define LUM_OFFSET 0x1e /* reverse offset / start of frame */ /* @@ -746,11 +754,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, if (sd->tosof == 0) { /* if inside a frame */ /* check for 'ff ff ff xx' at start and at end of packet */ - /* (len is always >= 3) */ + /* (len is always >= 3 and xx never ff) */ switch (sd->ffnb) { case 1: - if (data[0] != 0xff) + if (data[0] != 0xff) { /* can be '00' only */ + __u8 ff; + + sd->ffnb = 0; + ff = 0xff; + gspca_frame_add(gspca_dev, INTER_PACKET, + frame, &ff, 1); break; /* keep 'ff 00' */ + } /* fall thru */ case 2: case 3: @@ -775,16 +790,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } } else { /* outside a frame */ - /* - * get the luminosity - * and go to the start of frame - */ + /* get the luminosity and go to the start of frame */ data += sd->tosof; len -= sd->tosof; if (sd->tosof > LUM_OFFSET) sd->lum_sum += data[-LUM_OFFSET]; - put_jpeg_head(gspca_dev, frame); sd->tosof = 0; + put_jpeg_head(gspca_dev, frame); } for (i = 0; i < len; i++) { @@ -792,10 +804,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, continue; switch (data[i + 1]) { case 0xd9: /* end of frame */ - i += 2; frame = gspca_frame_add(gspca_dev, LAST_PACKET, - frame, data, i); + frame, data, i + 2); data += i + INTER_FRAME; len -= i + INTER_FRAME; i = 0; @@ -816,6 +827,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, break; } } + gspca_frame_add(gspca_dev, INTER_PACKET, + frame, data, i); } static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) From 3466234229e6535a061f5f63a87bfb12c833d96a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 16:47:28 -0300 Subject: [PATCH 392/638] V4L/DVB (8667): gspca: Bad probe of Z-Star/Vimicro webcams with pas106 sensor. This patch moves the detection of the 2wr SIF pas106b sensor to before detecting other sensors. Patch change by jfm: Check SIF for identified webcams only. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index bc7d0eedcd8..d36f4d7d22b 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6964,8 +6964,13 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev) case SENSOR_MC501CB: return -1; /* don't probe */ case SENSOR_TAS5130C_VF0250: - /* may probe but with write in reg 0x0010 */ + /* may probe but with no write in reg 0x0010 */ return -1; /* don't probe */ + case SENSOR_PAS106: + sensor = sif_probe(gspca_dev); + if (sensor >= 0) + return sensor; + break; } sensor = vga_2wr_probe(gspca_dev); if (sensor >= 0) { @@ -6974,12 +6979,10 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev) /* next probe is needed for OmniVision ? */ } sensor2 = vga_3wr_probe(gspca_dev); - if (sensor2 >= 0) { - if (sensor >= 0) - return sensor; - return sensor2; - } - return sif_probe(gspca_dev); + if (sensor2 >= 0 + && sensor >= 0) + return sensor; + return sensor2; } /* this function is called at probe time */ @@ -7502,14 +7505,14 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x041e, 0x4017)}, - {USB_DEVICE(0x041e, 0x401c)}, + {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x401e)}, {USB_DEVICE(0x041e, 0x401f)}, #endif {USB_DEVICE(0x041e, 0x4029)}, #ifndef CONFIG_USB_ZC0301 - {USB_DEVICE(0x041e, 0x4034)}, - {USB_DEVICE(0x041e, 0x4035)}, + {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x4036)}, {USB_DEVICE(0x041e, 0x403a)}, #endif @@ -7541,10 +7544,10 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x08d8)}, {USB_DEVICE(0x046d, 0x08da)}, {USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB}, - {USB_DEVICE(0x0471, 0x0325)}, - {USB_DEVICE(0x0471, 0x0326)}, - {USB_DEVICE(0x0471, 0x032d)}, - {USB_DEVICE(0x0471, 0x032e)}, + {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x055f, 0xc005)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x055f, 0xd003)}, From 5bb0f21a46281b021897d2c56d50685c1939b5ee Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:29 -0300 Subject: [PATCH 393/638] V4L/DVB (8668): gspca: Conflict GSPCA / ET61X251 for the webcam 102c:6251. Fix a double handling of 102c:6251 and no handling of 102c:6151 when both drivers GSPCA and ET61X251. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/etoms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 1dbe92d01e6..ca23c3f9aaa 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -904,10 +904,10 @@ static struct sd_desc sd_desc = { /* -- module initialisation -- */ static __devinitdata struct usb_device_id device_table[] = { -#ifndef CONFIG_USB_ET61X251 {USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106}, -#endif +#ifndef CONFIG_USB_ET61X251 {USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX}, +#endif {} }; From 6c9d3c59e6fdb8dfadaf7ba38f1d0b64ff066b36 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:30 -0300 Subject: [PATCH 394/638] V4L/DVB (8669): gspca: Add white balance control for spca561 rev 012A. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 110 +++++++++++++++++++++++----- 1 file changed, 92 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 1073ac3d2ec..02e274452c4 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -34,6 +34,7 @@ struct sd { unsigned short contrast; __u8 brightness; + __u8 white; __u8 autogain; __u8 chip_revision; @@ -46,11 +47,12 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { -#define SD_BRIGHTNESS 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -59,12 +61,12 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 63, .step = 1, - .default_value = 32, +#define BRIGHTNESS_DEF 32 + .default_value = BRIGHTNESS_DEF, }, .set = sd_setbrightness, .get = sd_getbrightness, }, -#define SD_CONTRAST 1 { { .id = V4L2_CID_CONTRAST, @@ -73,12 +75,26 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 0x3fff, .step = 1, - .default_value = 0x2000, +#define CONTRAST_DEF 0x2000 + .default_value = CONTRAST_DEF, }, .set = sd_setcontrast, .get = sd_getcontrast, }, -#define SD_AUTOGAIN 2 + { + { + .id = V4L2_CID_DO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "While Balance", + .minimum = 0, + .maximum = 0x7f, + .step = 1, +#define WHITE_DEF 40 + .default_value = WHITE_DEF, + }, + .set = sd_setwhite, + .get = sd_getwhite, + }, { { .id = V4L2_CID_AUTOGAIN, @@ -87,7 +103,8 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, - .default_value = 1, +#define AUTOGAIN_DEF 1 + .default_value = AUTOGAIN_DEF, }, .set = sd_setautogain, .get = sd_getautogain, @@ -438,7 +455,7 @@ static const __u16 spca561_init_data[][2] = { {0x0035, 0x8801}, /* 0x14 - set gain general */ {0x001f, 0x8805}, /* 0x14 */ {0x0000, 0x8800}, - {0x0030, 0x8112}, + {0x000e, 0x8112}, /* white balance - was 30 */ {} }; @@ -478,9 +495,10 @@ static const __u16 Pb100_2map8300[][2] = { }; static const __u16 spca561_161rev12A_data1[][2] = { - {0x21, 0x8118}, - {0x01, 0x8114}, - {0x00, 0x8112}, + {0x29, 0x8118}, /* white balance - was 21 */ + {0x08, 0x8114}, /* white balance - was 01 */ + {0x0e, 0x8112}, /* white balance - was 00 */ + {0x00, 0x8102}, /* white balance - new */ {0x92, 0x8804}, {0x04, 0x8802}, /* windows uses 08 */ {} @@ -505,14 +523,16 @@ static const __u16 spca561_161rev12A_data2[][2] = { {0xb0, 0x8603}, /* sensor gains */ + {0x07, 0x8601}, /* white balance - new */ + {0x07, 0x8602}, /* white balance - new */ {0x00, 0x8610}, /* *red */ {0x00, 0x8611}, /* 3f *green */ {0x00, 0x8612}, /* green *blue */ {0x00, 0x8613}, /* blue *green */ - {0x35, 0x8614}, /* green *red */ - {0x35, 0x8615}, /* 40 *green */ - {0x35, 0x8616}, /* 7a *blue */ - {0x35, 0x8617}, /* 40 *green */ + {0x43, 0x8614}, /* green *red - white balance - was 0x35 */ + {0x40, 0x8615}, /* 40 *green - white balance - was 0x35 */ + {0x71, 0x8616}, /* 7a *blue - white balance - was 0x35 */ + {0x40, 0x8617}, /* 40 *green - white balance - was 0x35 */ {0x0c, 0x8620}, /* 0c */ {0xc8, 0x8631}, /* c8 */ @@ -527,6 +547,7 @@ static const __u16 spca561_161rev12A_data2[][2] = { {0xdf, 0x863c}, /* df */ {0xf0, 0x8505}, {0x32, 0x850a}, + {0x99, 0x8700}, /* - white balance - new */ {} }; @@ -588,9 +609,10 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = sizeof sif_mode / sizeof sif_mode[0]; sd->chip_revision = id->driver_info; - sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; - sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; - sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value; + sd->brightness = BRIGHTNESS_DEF; + sd->contrast = CONTRAST_DEF; + sd->autogain = AUTOGAIN_DEF; + sd->white = WHITE_DEF; return 0; } @@ -628,15 +650,18 @@ static void setcontrast(struct gspca_dev *gspca_dev) reg_w_val(dev, lowb, 0x8653); reg_w_val(dev, lowb, 0x8654); break; - case Rev012A: { + default: { +/* case Rev012A: { */ __u8 Reg8391[] = { 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 }; /* Write camera sensor settings */ expotimes = (sd->contrast >> 5) & 0x07ff; + /* exposure is in 8309 2b, range 0120 - 5720 */ Reg8391[0] = expotimes & 0xff; /* exposure */ Reg8391[1] = 0x18 | (expotimes >> 8); Reg8391[2] = sd->brightness; /* gain */ + /* gain in 8335, 2b range 0000 - 2400 */ reg_w_buf(gspca_dev, 0x8391, Reg8391, 8); reg_w_buf(gspca_dev, 0x8390, Reg8391, 8); break; @@ -644,6 +669,34 @@ static void setcontrast(struct gspca_dev *gspca_dev) } } +static void setwhite(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u16 white; + __u8 reg8614, reg8616; + + switch (sd->chip_revision) { + case Rev072A: + /* no such hardware */ + break; + default: +/* case Rev012A: */ + white = sd->white; + if (sd->white == 0) { + PDEBUG(D_CONF, "Discarding null whiteness"); + break; + } + /* try to emulate MS-win as possible */ + if (white < 0x45) + reg8616 = white; + else + reg8616 = 0x93 + (white >> 2); + reg8614 = 0x28 + (white >> 4); + reg_w_val(gspca_dev->dev, reg8616, 0x8616); + reg_w_val(gspca_dev->dev, reg8614, 0x8614); + } +} + static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -714,6 +767,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20); reg_w_val(gspca_dev->dev, 0x850b, 0x03); setcontrast(gspca_dev); + setwhite(gspca_dev); break; } } @@ -721,6 +775,7 @@ static void sd_start(struct gspca_dev *gspca_dev) static void sd_stopN(struct gspca_dev *gspca_dev) { reg_w_val(gspca_dev->dev, 0x8112, 0x20); + reg_w_val(gspca_dev->dev, 0x8102, 0x00); /* white balance - new */ } static void sd_stop0(struct gspca_dev *gspca_dev) @@ -968,6 +1023,25 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +/* white balance - new */ +static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->white = val; + if (gspca_dev->streaming) + setwhite(gspca_dev); + return 0; +} + +static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->white; + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, From a0b508c2d7d0de0e46555793e334e35381716825 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:31 -0300 Subject: [PATCH 395/638] V4L/DVB (8671): gspca: Remove the unused field 'dev_name' of the device structure. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.h | 1 - drivers/media/video/gspca/pac207.c | 1 - drivers/media/video/gspca/spca561.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 67e448940ea..5cb584546ee 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -56,7 +56,6 @@ extern int gspca_debug; /* device information - set at probe time */ struct cam { - char *dev_name; struct v4l2_pix_format *cam_mode; /* size nmodes */ char nmodes; __u8 epaddr; diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 7ef18d57881..cee45b0486c 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -271,7 +271,6 @@ static int sd_config(struct gspca_dev *gspca_dev, " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); cam = &gspca_dev->cam; - cam->dev_name = (char *) id->driver_info; cam->epaddr = 0x05; cam->cam_mode = sif_mode; cam->nmodes = ARRAY_SIZE(sif_mode); diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 02e274452c4..a9f7c99e6f5 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -602,7 +602,6 @@ static int sd_config(struct gspca_dev *gspca_dev, } cam = &gspca_dev->cam; - cam->dev_name = (char *) id->driver_info; cam->epaddr = 0x01; gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */ cam->cam_mode = sif_mode; From 7879d459f1601be742d0d63930d17cd4aac956fd Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:32 -0300 Subject: [PATCH 396/638] V4L/DVB (8672): gspca: Big rewrite of spca561. Bug register/value inversions in USB exchanges. Exposure and gain controls added for rev 12a. Separate the functions and controls of the revisions 12a and 72a. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 594 ++++++++++++++++------------ 1 file changed, 335 insertions(+), 259 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index a9f7c99e6f5..0a2b8bc5b85 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -32,85 +32,44 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - unsigned short contrast; - __u8 brightness; - __u8 white; + __u16 contrast; /* rev72a only */ +#define CONTRAST_MIN 0x0000 +#define CONTRAST_DEF 0x2000 +#define CONTRAST_MAX 0x3fff + + __u16 exposure; /* rev12a only */ +#define EXPOSURE_MIN 0x0120 +#define EXPOSURE_DEF 0x20ae +#define EXPOSURE_MAX 0x5720 + + __u8 brightness; /* rev72a only */ +#define BRIGHTNESS_MIN 0 +#define BRIGHTNESS_DEF 32 +#define BRIGHTNESS_MAX 63 + + __u8 white; /* rev12a only */ +#define WHITE_MIN 0 +#define WHITE_DEF 0x40 +#define WHITE_MAX 0x7f + __u8 autogain; +#define AUTOGAIN_MIN 0 +#define AUTOGAIN_DEF 1 +#define AUTOGAIN_MAX 1 + + __u8 gain; /* rev12a only */ +#define GAIN_MIN 0x0 +#define GAIN_DEF 0x24 +#define GAIN_MAX 0x24 __u8 chip_revision; +#define Rev012A 0 +#define Rev072A 1 + signed char ag_cnt; #define AG_CNT_START 13 }; -/* V4L2 controls supported by the driver */ -static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val); -static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); -static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); - -static struct ctrl sd_ctrls[] = { - { - { - .id = V4L2_CID_BRIGHTNESS, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Brightness", - .minimum = 0, - .maximum = 63, - .step = 1, -#define BRIGHTNESS_DEF 32 - .default_value = BRIGHTNESS_DEF, - }, - .set = sd_setbrightness, - .get = sd_getbrightness, - }, - { - { - .id = V4L2_CID_CONTRAST, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Contrast", - .minimum = 0, - .maximum = 0x3fff, - .step = 1, -#define CONTRAST_DEF 0x2000 - .default_value = CONTRAST_DEF, - }, - .set = sd_setcontrast, - .get = sd_getcontrast, - }, - { - { - .id = V4L2_CID_DO_WHITE_BALANCE, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "While Balance", - .minimum = 0, - .maximum = 0x7f, - .step = 1, -#define WHITE_DEF 40 - .default_value = WHITE_DEF, - }, - .set = sd_setwhite, - .get = sd_getwhite, - }, - { - { - .id = V4L2_CID_AUTOGAIN, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Auto Gain", - .minimum = 0, - .maximum = 1, - .step = 1, -#define AUTOGAIN_DEF 1 - .default_value = AUTOGAIN_DEF, - }, - .set = sd_setautogain, - .get = sd_getautogain, - }, -}; - static struct v4l2_pix_format sif_mode[] = { {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, .bytesperline = 160, @@ -160,12 +119,8 @@ static struct v4l2_pix_format sif_mode[] = { #define SPCA561_INDEX_I2C_BASE 0x8800 #define SPCA561_SNAPBIT 0x20 #define SPCA561_SNAPCTRL 0x40 -enum { - Rev072A = 0, - Rev012A, -}; -static void reg_w_val(struct usb_device *dev, __u16 index, __u16 value) +static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value) { int ret; @@ -215,12 +170,6 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, index, gspca_dev->usb_buf, len, 500); } -static void i2c_init(struct gspca_dev *gspca_dev, __u8 mode) -{ - reg_w_val(gspca_dev->dev, 0x92, 0x8804); - reg_w_val(gspca_dev->dev, mode, 0x8802); -} - static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg) { int retry = 60; @@ -229,9 +178,9 @@ static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg) DataLow = valeur; DataHight = valeur >> 8; - reg_w_val(gspca_dev->dev, reg, 0x8801); - reg_w_val(gspca_dev->dev, DataLow, 0x8805); - reg_w_val(gspca_dev->dev, DataHight, 0x8800); + reg_w_val(gspca_dev->dev, 0x8801, reg); + reg_w_val(gspca_dev->dev, 0x8805, DataLow); + reg_w_val(gspca_dev->dev, 0x8800, DataHight); while (retry--) { reg_r(gspca_dev, 0x8803, 1); if (!gspca_dev->usb_buf[0]) @@ -245,9 +194,9 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode) __u8 value; __u8 vallsb; - reg_w_val(gspca_dev->dev, 0x92, 0x8804); - reg_w_val(gspca_dev->dev, reg, 0x8801); - reg_w_val(gspca_dev->dev, (mode | 0x01), 0x8802); + reg_w_val(gspca_dev->dev, 0x8804, 0x92); + reg_w_val(gspca_dev->dev, 0x8801, reg); + reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01)); while (retry--) { reg_r(gspca_dev, 0x8803, 1); if (!gspca_dev->usb_buf) @@ -459,17 +408,6 @@ static const __u16 spca561_init_data[][2] = { {} }; -static void sensor_reset(struct gspca_dev *gspca_dev) -{ - reg_w_val(gspca_dev->dev, 0x8631, 0xc8); - reg_w_val(gspca_dev->dev, 0x8634, 0xc8); - reg_w_val(gspca_dev->dev, 0x8112, 0x00); - reg_w_val(gspca_dev->dev, 0x8114, 0x00); - reg_w_val(gspca_dev->dev, 0x8118, 0x21); - i2c_init(gspca_dev, 0x14); - i2c_write(gspca_dev, 1, 0x0d); - i2c_write(gspca_dev, 0, 0x0d); -} /******************** QC Express etch2 stuff ********************/ static const __u16 Pb100_1map8300[][2] = { @@ -479,9 +417,9 @@ static const __u16 Pb100_1map8300[][2] = { {0x8303, 0x0125}, /* image area */ {0x8304, 0x0169}, {0x8328, 0x000b}, - {0x833c, 0x0001}, + {0x833c, 0x0001}, /*fixme: win:07*/ - {0x832f, 0x0419}, + {0x832f, 0x1904}, /*fixme: was 0419*/ {0x8307, 0x00aa}, {0x8301, 0x0003}, {0x8302, 0x000e}, @@ -547,7 +485,7 @@ static const __u16 spca561_161rev12A_data2[][2] = { {0xdf, 0x863c}, /* df */ {0xf0, 0x8505}, {0x32, 0x850a}, - {0x99, 0x8700}, /* - white balance - new */ +/* {0x99, 0x8700}, * - white balance - new (removed) */ {} }; @@ -566,9 +504,10 @@ static void sensor_mapwrite(struct gspca_dev *gspca_dev, } static void init_161rev12A(struct gspca_dev *gspca_dev) { - sensor_reset(gspca_dev); +/* sensor_reset(gspca_dev); (not in win) */ write_vector(gspca_dev, spca561_161rev12A_data1); sensor_mapwrite(gspca_dev, Pb100_1map8300); +/*fixme: should be in sd_start*/ write_vector(gspca_dev, spca561_161rev12A_data2); sensor_mapwrite(gspca_dev, Pb100_2map8300); } @@ -605,32 +544,29 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->epaddr = 0x01; gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */ cam->cam_mode = sif_mode; - cam->nmodes = sizeof sif_mode / sizeof sif_mode[0]; + cam->nmodes = ARRAY_SIZE(sif_mode); sd->chip_revision = id->driver_info; sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; - sd->autogain = AUTOGAIN_DEF; sd->white = WHITE_DEF; + sd->exposure = EXPOSURE_DEF; + sd->autogain = AUTOGAIN_DEF; + sd->gain = GAIN_DEF; return 0; } /* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +static int sd_open_12a(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; - - switch (sd->chip_revision) { - case Rev072A: - PDEBUG(D_STREAM, "Chip revision id: 072a"); - write_vector(gspca_dev, spca561_init_data); - break; - default: -/* case Rev012A: */ - PDEBUG(D_STREAM, "Chip revision id: 012a"); - init_161rev12A(gspca_dev); - break; - } + PDEBUG(D_STREAM, "Chip revision: 012a"); + init_161rev12A(gspca_dev); + return 0; +} +static int sd_open_72a(struct gspca_dev *gspca_dev) +{ + PDEBUG(D_STREAM, "Chip revision: 072a"); + write_vector(gspca_dev, spca561_init_data); return 0; } @@ -639,28 +575,20 @@ static void setcontrast(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; __u8 lowb; - int expotimes; switch (sd->chip_revision) { case Rev072A: lowb = sd->contrast >> 8; - reg_w_val(dev, lowb, 0x8651); - reg_w_val(dev, lowb, 0x8652); - reg_w_val(dev, lowb, 0x8653); - reg_w_val(dev, lowb, 0x8654); + reg_w_val(dev, 0x8651, lowb); + reg_w_val(dev, 0x8652, lowb); + reg_w_val(dev, 0x8653, lowb); + reg_w_val(dev, 0x8654, lowb); break; default: { /* case Rev012A: { */ - __u8 Reg8391[] = - { 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 }; + static const __u8 Reg8391[] = + { 0x92, 0x30, 0x20, 0x00, 0x0c, 0x00, 0x00, 0x00 }; - /* Write camera sensor settings */ - expotimes = (sd->contrast >> 5) & 0x07ff; - /* exposure is in 8309 2b, range 0120 - 5720 */ - Reg8391[0] = expotimes & 0xff; /* exposure */ - Reg8391[1] = 0x18 | (expotimes >> 8); - Reg8391[2] = sd->brightness; /* gain */ - /* gain in 8335, 2b range 0000 - 2400 */ reg_w_buf(gspca_dev, 0x8391, Reg8391, 8); reg_w_buf(gspca_dev, 0x8390, Reg8391, 8); break; @@ -668,32 +596,44 @@ static void setcontrast(struct gspca_dev *gspca_dev) } } +/* rev12a only */ static void setwhite(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u16 white; __u8 reg8614, reg8616; - switch (sd->chip_revision) { - case Rev072A: - /* no such hardware */ - break; - default: -/* case Rev012A: */ - white = sd->white; - if (sd->white == 0) { - PDEBUG(D_CONF, "Discarding null whiteness"); - break; - } - /* try to emulate MS-win as possible */ - if (white < 0x45) - reg8616 = white; - else - reg8616 = 0x93 + (white >> 2); - reg8614 = 0x28 + (white >> 4); - reg_w_val(gspca_dev->dev, reg8616, 0x8616); - reg_w_val(gspca_dev->dev, reg8614, 0x8614); + white = sd->white; + if (sd->white == 0) { + PDEBUG(D_CONF, "Discarding null whiteness"); + return; } + /* try to emulate MS-win as possible */ + if (white < 0x45) + reg8616 = white; + else + reg8616 = 0x93 + (white >> 2); + reg8614 = 0x28 + (white >> 4); + reg_w_val(gspca_dev->dev, 0x8616, reg8616); + reg_w_val(gspca_dev->dev, 0x8614, reg8614); +} + +/* rev 12a only */ +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct usb_device *dev = gspca_dev->dev; + + reg_w_val(dev, 0x8309, sd->gain); +} + +/* rev 12a only */ +static void setgain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + struct usb_device *dev = gspca_dev->dev; + + reg_w_val(dev, 0x8335, sd->gain); } static void setautogain(struct gspca_dev *gspca_dev) @@ -708,67 +648,67 @@ static void setautogain(struct gspca_dev *gspca_dev) } } -static void sd_start(struct gspca_dev *gspca_dev) +static void sd_start_12a(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; int Clck; __u8 Reg8307[] = { 0xaa, 0x00 }; int mode; mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; - switch (sd->chip_revision) { - case Rev072A: - switch (mode) { - default: -/* case 0: - case 1: */ - Clck = 0x25; - break; - case 2: - Clck = 0x22; - break; - case 3: - Clck = 0x21; - break; - } - reg_w_val(dev, 0x8500, mode); /* mode */ - reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ - reg_w_val(dev, 0x8112, 0x10 | 0x20); - setautogain(gspca_dev); + switch (mode) { + case 0: + case 1: + Clck = 0x8a; + break; + case 2: + Clck = 0x85; break; default: -/* case Rev012A: */ - switch (mode) { - case 0: - case 1: - Clck = 0x8a; - break; - case 2: - Clck = 0x85; - break; - default: - Clck = 0x83; - break; - } - if (mode <= 1) { - /* Use compression on 320x240 and above */ - reg_w_val(dev, 0x8500, 0x10 | mode); - } else { - /* I couldn't get the compression to work below 320x240 - * Fortunately at these resolutions the bandwidth - * is sufficient to push raw frames at ~20fps */ - reg_w_val(dev, 0x8500, mode); - } /* -- qq@kuku.eu.org */ - reg_w_buf(gspca_dev, 0x8307, Reg8307, 2); - reg_w_val(gspca_dev->dev, 0x8700, Clck); - /* 0x8f 0x85 0x27 clock */ - reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20); - reg_w_val(gspca_dev->dev, 0x850b, 0x03); - setcontrast(gspca_dev); - setwhite(gspca_dev); + Clck = 0x83; break; } + if (mode <= 1) { + /* Use compression on 320x240 and above */ + reg_w_val(dev, 0x8500, 0x10 | mode); + } else { + /* I couldn't get the compression to work below 320x240 + * Fortunately at these resolutions the bandwidth + * is sufficient to push raw frames at ~20fps */ + reg_w_val(dev, 0x8500, mode); + } /* -- qq@kuku.eu.org */ + reg_w_buf(gspca_dev, 0x8307, Reg8307, 2); + reg_w_val(gspca_dev->dev, 0x8700, Clck); + /* 0x8f 0x85 0x27 clock */ + reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20); + reg_w_val(gspca_dev->dev, 0x850b, 0x03); + setcontrast(gspca_dev); + setwhite(gspca_dev); +} +static void sd_start_72a(struct gspca_dev *gspca_dev) +{ + struct usb_device *dev = gspca_dev->dev; + int Clck; + int mode; + + mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + switch (mode) { + default: +/* case 0: + case 1: */ + Clck = 0x25; + break; + case 2: + Clck = 0x22; + break; + case 3: + Clck = 0x21; + break; + } + reg_w_val(dev, 0x8500, mode); /* mode */ + reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ + reg_w_val(dev, 0x8112, 0x10 | 0x20); + setautogain(gspca_dev); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -787,6 +727,7 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8114, 0); } +/* rev72a only */ static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -895,24 +836,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } +/* rev 72a only */ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 value; - switch (sd->chip_revision) { - case Rev072A: - value = sd->brightness; - reg_w_val(gspca_dev->dev, value, 0x8611); - reg_w_val(gspca_dev->dev, value, 0x8612); - reg_w_val(gspca_dev->dev, value, 0x8613); - reg_w_val(gspca_dev->dev, value, 0x8614); - break; - default: -/* case Rev012A: */ - setcontrast(gspca_dev); - break; - } + value = sd->brightness; + reg_w_val(gspca_dev->dev, 0x8611, value); + reg_w_val(gspca_dev->dev, 0x8612, value); + reg_w_val(gspca_dev->dev, 0x8613, value); + reg_w_val(gspca_dev->dev, 0x8614, value); } static void getbrightness(struct gspca_dev *gspca_dev) @@ -920,52 +854,38 @@ static void getbrightness(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; __u16 tot; - switch (sd->chip_revision) { - case Rev072A: - tot = 0; - reg_r(gspca_dev, 0x8611, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8612, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8613, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8614, 1); - tot += gspca_dev->usb_buf[0]; - sd->brightness = tot >> 2; - break; - default: -/* case Rev012A: */ - /* no way to read sensor settings */ - break; - } + tot = 0; + reg_r(gspca_dev, 0x8611, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8612, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8613, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8614, 1); + tot += gspca_dev->usb_buf[0]; + sd->brightness = tot >> 2; } +/* rev72a only */ static void getcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u16 tot; - switch (sd->chip_revision) { - case Rev072A: - tot = 0; - reg_r(gspca_dev, 0x8651, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8652, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8653, 1); - tot += gspca_dev->usb_buf[0]; - reg_r(gspca_dev, 0x8654, 1); - tot += gspca_dev->usb_buf[0]; - sd->contrast = tot << 6; - break; - default: -/* case Rev012A: */ - /* no way to read sensor settings */ - break; - } + tot = 0; + reg_r(gspca_dev, 0x8651, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8652, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8653, 1); + tot += gspca_dev->usb_buf[0]; + reg_r(gspca_dev, 0x8654, 1); + tot += gspca_dev->usb_buf[0]; + sd->contrast = tot << 6; PDEBUG(D_CONF, "get contrast %d", sd->contrast); } +/* rev 72a only */ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -985,6 +905,7 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +/* rev 72a only */ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -1022,7 +943,7 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } -/* white balance - new */ +/* rev12a only */ static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; @@ -1041,20 +962,173 @@ static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +/* rev12a only */ +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + setexposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->exposure; + return 0; +} + +/* rev12a only */ +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + setgain(gspca_dev); + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->gain; + return 0; +} + +/* control tables */ +static struct ctrl sd_ctrls_12a[] = { + { + { + .id = V4L2_CID_DO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "While Balance", + .minimum = WHITE_MIN, + .maximum = WHITE_MAX, + .step = 1, + .default_value = WHITE_DEF, + }, + .set = sd_setwhite, + .get = sd_getwhite, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = EXPOSURE_MIN, + .maximum = EXPOSURE_MAX, + .step = 1, + .default_value = EXPOSURE_DEF, + }, + .set = sd_setexposure, + .get = sd_getexposure, + }, + { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Gain", + .minimum = AUTOGAIN_MIN, + .maximum = AUTOGAIN_MAX, + .step = 1, + .default_value = AUTOGAIN_DEF, + }, + .set = sd_setautogain, + .get = sd_getautogain, + }, + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = GAIN_MIN, + .maximum = GAIN_MAX, + .step = 1, + .default_value = GAIN_DEF, + }, + .set = sd_setgain, + .get = sd_getgain, + }, +}; + +static struct ctrl sd_ctrls_72a[] = { + { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = BRIGHTNESS_MIN, + .maximum = BRIGHTNESS_MAX, + .step = 1, + .default_value = BRIGHTNESS_DEF, + }, + .set = sd_setbrightness, + .get = sd_getbrightness, + }, + { + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Contrast", + .minimum = CONTRAST_MIN, + .maximum = CONTRAST_MAX, + .step = 1, + .default_value = CONTRAST_DEF, + }, + .set = sd_setcontrast, + .get = sd_getcontrast, + }, + { + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Auto Gain", + .minimum = AUTOGAIN_MIN, + .maximum = AUTOGAIN_MAX, + .step = 1, + .default_value = AUTOGAIN_DEF, + }, + .set = sd_setautogain, + .get = sd_getautogain, + }, +}; + /* sub-driver description */ -static const struct sd_desc sd_desc = { +static const struct sd_desc sd_desc_12a = { .name = MODULE_NAME, - .ctrls = sd_ctrls, - .nctrls = ARRAY_SIZE(sd_ctrls), + .ctrls = sd_ctrls_12a, + .nctrls = ARRAY_SIZE(sd_ctrls_12a), .config = sd_config, - .open = sd_open, - .start = sd_start, + .open = sd_open_12a, + .start = sd_start_12a, + .stopN = sd_stopN, + .stop0 = sd_stop0, + .close = sd_close, + .pkt_scan = sd_pkt_scan, +/* .dq_callback = do_autogain, * fixme */ +}; +static const struct sd_desc sd_desc_72a = { + .name = MODULE_NAME, + .ctrls = sd_ctrls_72a, + .nctrls = ARRAY_SIZE(sd_ctrls_72a), + .config = sd_config, + .open = sd_open_72a, + .start = sd_start_72a, .stopN = sd_stopN, .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, }; +static const struct sd_desc *sd_desc[2] = { + &sd_desc_12a, + &sd_desc_72a +}; /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { @@ -1082,7 +1156,9 @@ MODULE_DEVICE_TABLE(usb, device_table); static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), + return gspca_dev_probe(intf, id, + sd_desc[id->driver_info], + sizeof(struct sd), THIS_MODULE); } From 285a4f6c8e518f03758c7b085bda13bb3795df0a Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:33 -0300 Subject: [PATCH 397/638] V4L/DVB (8673): gspca: Bad frame scanning again and bad init in pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 62 +++++++++++++++++++++++------ 1 file changed, 50 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 730b4a1aed9..85d9ddbc5b7 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -220,6 +220,7 @@ static const __u8 probe_7302[] = { }; static const __u8 start_7302[] = { /* index, len, [value]* */ + 0xff, 1, 0x00, /* page 0 */ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00, @@ -249,7 +250,7 @@ static const __u8 start_7302[] = { 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9, 0xc1, 0xd7, 0xec, 0xdc, 1, 0x01, - 0xff, 1, 0x01, + 0xff, 1, 0x01, /* page 1 */ 0x12, 3, 0x02, 0x00, 0x01, 0x3e, 2, 0x00, 0x00, 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2, @@ -257,26 +258,26 @@ static const __u8 start_7302[] = { 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20, 0x02, 0x00, 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04, - 0xc8, 17, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, + 0xc8, 14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x01, 0x07, 0x04, 0x01, - 0x01, + 0xd8, 1, 0x01, 0xdb, 2, 0x00, 0x01, - 0xde, 8, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00, + 0xde, 7, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00, 0xe6, 4, 0x00, 0x00, 0x00, 0x01, 0xeb, 1, 0x00, - 0xff, 1, 0x02, + 0xff, 1, 0x02, /* page 2 */ 0x22, 1, 0x00, - 0xff, 1, 0x03, + 0xff, 1, 0x03, /* page 3 */ 0x00, 255, /* load the page 3 */ 0x11, 1, 0x01, - 0xff, 1, 0x02, + 0xff, 1, 0x02, /* page 2 */ 0x13, 1, 0x00, 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96, 0x27, 2, 0x14, 0x0c, 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22, 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44, 0x6e, 1, 0x08, - 0xff, 1, 0x03, + 0xff, 1, 0x03, /* page 1 */ 0x78, 1, 0x00, 0, 0 /* end of sequence */ }; @@ -321,14 +322,14 @@ static const __u8 probe_7311[] = { static const __u8 start_7311[] = { /* index, len, [value]* */ - 0xff, 1, 0x01, - 0x02, 53, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00, + 0xff, 1, 0x01, /* page 1 */ + 0x02, 43, 0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00, 0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c, 0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10, 0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x3e, 52, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e, + 0x3e, 42, 0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e, 0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48, 0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78, @@ -342,7 +343,7 @@ static const __u8 start_7311[] = { 0xa0, 4, 0x44, 0x44, 0x44, 0x04, 0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00, 0x3f, 0x00, 0x0a, 0x01, 0x00, - 0xff, 1, 0x04, + 0xff, 1, 0x04, /* page 4 */ 0x00, 254, /* load the page 4 */ 0x11, 1, 0x01, 0, 0 /* end of sequence */ @@ -738,6 +739,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, #define INTER_FRAME 0x53 /* eof + inter frame + sof */ #define LUM_OFFSET 0x1e /* reverse offset / start of frame */ +/*fixme:test+*/ +/* dump the packet */ + if (gspca_debug & 0x200) { + static char tmp[50]; + + PDEBUG(0x200, "pkt_scan"); + tmp[0] = 0; + for (i = 0; i < len; i++) { + if (i % 16 == 0 && i != 0) { + PDEBUG(0x200, "%s", tmp); + tmp[0] = 0; + } + sprintf(&tmp[(i % 16) * 3], "%02x ", data[i]); + } + if (tmp[0] != 0) + PDEBUG(0x200, "%s", tmp); + } +/*fixme:test-*/ /* * inside a frame, there may be: * escaped ff ('ff 00') @@ -819,6 +838,25 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, put_jpeg_head(gspca_dev, frame); break; case 0xff: /* 'ff ff ff xx' */ +/*fixme:test+*/ +/* is there a start of frame ? */ + if (data[i + 2] == 0x00) { + static __u8 ffd9[2] = {0xff, 0xd9}; + + gspca_frame_add(gspca_dev, + INTER_PACKET, + frame, data, + i + 7 - INTER_FRAME); + frame = gspca_frame_add(gspca_dev, + LAST_PACKET, + frame, ffd9, 2); + data += i + 7; + len -= i + 7; + i = 0; + put_jpeg_head(gspca_dev, frame); + break; + } +/*fixme:test-*/ gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, i); data += i + 4; From 6ab0b174d22b448d66058c9de0114fdfac5b7ccf Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:34 -0300 Subject: [PATCH 398/638] V4L/DVB (8674): gspca: Webcam 0c45:612e added in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 110 ++++++++++++++++++++++++++--- 1 file changed, 100 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 0a20db87a47..47737bf04c6 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -55,8 +55,9 @@ struct sd { #define SENSOR_MI0360 1 #define SENSOR_MO4000 2 #define SENSOR_OM6802 3 -#define SENSOR_OV7648 4 -#define SENSOR_OV7660 5 +#define SENSOR_OV7630 4 +#define SENSOR_OV7648 5 +#define SENSOR_OV7660 6 unsigned char i2c_base; }; @@ -195,6 +196,17 @@ static const __u8 sn_om6802[] = { 0xf7 }; +static const __u8 sn_ov7630[] = { +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x21, 0x40, 0x00, 0x1a, 0x20, 0x1f, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xa1, 0x21, 0x76, 0x21, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x04, 0x01, 0x0a, 0x28, 0x1e, 0xc2, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + static const __u8 sn_ov7648[] = { /* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, @@ -223,6 +235,7 @@ static const __u8 *sn_tb[] = { sn_mi0360, sn_mo4000, sn_om6802, + sn_ov7630, sn_ov7648, sn_ov7660 }; @@ -390,6 +403,56 @@ static __u8 om6802_sensor_init[][8] = { /* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */ {} }; +static const __u8 ov7630_sensor_init[][8] = { + {0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10}, +/* win: delay 20ms */ + {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10}, +/* win: delay 20ms */ + {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, +/* win: loop on 2 wwrite, 1 read */ + {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10}, + {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10}, + {0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10}, + {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x1f, 0x00, 0x80, 0x80, 0x80, 0x10}, + {0xd1, 0x21, 0x23, 0xde, 0x10, 0x8a, 0xa0, 0x10}, + {0xc1, 0x21, 0x27, 0xca, 0xa2, 0x74, 0x00, 0x10}, + {0xd1, 0x21, 0x2a, 0x88, 0x00, 0x88, 0x01, 0x10}, + {0xc1, 0x21, 0x2e, 0x80, 0x00, 0x18, 0x00, 0x10}, + {0xa1, 0x21, 0x21, 0x08, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x32, 0xc2, 0x08, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x60, 0x05, 0x40, 0x12, 0x57, 0x10}, + {0xa1, 0x21, 0x64, 0x73, 0x00, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x65, 0x00, 0x55, 0x01, 0xac, 0x10}, + {0xa1, 0x21, 0x69, 0x38, 0x00, 0x00, 0x00, 0x10}, + {0xd1, 0x21, 0x6f, 0x1f, 0x01, 0x00, 0x10, 0x10}, + {0xd1, 0x21, 0x73, 0x50, 0x20, 0x02, 0x01, 0x10}, + {0xd1, 0x21, 0x77, 0xf3, 0x90, 0x98, 0x98, 0x10}, + {0xc1, 0x21, 0x7b, 0x00, 0x4c, 0xf7, 0x00, 0x10}, + {0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10}, + {0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10}, +/* */ + {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, +/*fixme: + 0x12, 0x04*/ + {0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, + {} +}; static const __u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */ /* (delay 20ms) */ @@ -803,6 +866,19 @@ static void om6802_InitSensor(struct gspca_dev *gspca_dev) } } +static void ov7630_InitSensor(struct gspca_dev *gspca_dev) +{ + int i = 0; + + i2c_w8(gspca_dev, ov7630_sensor_init[i]); + i++; + msleep(20); + while (ov7630_sensor_init[i][0]) { + i2c_w8(gspca_dev, ov7630_sensor_init[i]); + i++; + } +} + static void ov7648_InitSensor(struct gspca_dev *gspca_dev) { int i = 0; @@ -1060,8 +1136,8 @@ static void sd_start(struct gspca_dev *gspca_dev) static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f }; static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec }; static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */ - static const __u8 CE_sn9c325[] = - { 0x32, 0xdd, 0x32, 0xdd }; /* OV7648 - SN9C325 */ + static const __u8 CE_ov76xx[] = + { 0x32, 0xdd, 0x32, 0xdd }; /* OV7630/48 */ sn9c1xx = sn_tb[(int) sd->sensor]; configure_gpio(gspca_dev, sn9c1xx); @@ -1079,10 +1155,17 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0xc8, 0x50); reg_w1(gspca_dev, 0xc9, 0x3c); reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]); - switch (sd->bridge) { - case BRIDGE_SN9C325: + switch (sd->sensor) { + case SENSOR_OV7630: + reg17 = 0xe2; + break; + case SENSOR_OV7648: reg17 = 0xae; break; +/*jfm: from win trace */ + case SENSOR_OV7660: + reg17 = 0xa0; + break; default: reg17 = 0x60; break; @@ -1138,6 +1221,11 @@ static void sd_start(struct gspca_dev *gspca_dev) om6802_InitSensor(gspca_dev); reg17 = 0x64; /* 640 MCKSIZE */ break; + case SENSOR_OV7630: + ov7630_InitSensor(gspca_dev); + reg17 = 0xe2; + reg1 = 0x40; + break; case SENSOR_OV7648: ov7648_InitSensor(gspca_dev); reg17 = 0xa2; @@ -1162,9 +1250,10 @@ static void sd_start(struct gspca_dev *gspca_dev) } reg_w(gspca_dev, 0xc0, C0, 6); reg_w(gspca_dev, 0xca, CA, 4); - switch (sd->bridge) { - case BRIDGE_SN9C325: - reg_w(gspca_dev, 0xce, CE_sn9c325, 4); + switch (sd->sensor) { + case SENSOR_OV7630: + case SENSOR_OV7648: + reg_w(gspca_dev, 0xce, CE_ov76xx, 4); break; default: reg_w(gspca_dev, 0xce, CE, 4); @@ -1208,6 +1297,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) i2c_w8(gspca_dev, stopmi0360); data = 0x29; break; + case SENSOR_OV7630: case SENSOR_OV7648: data = 0x29; break; @@ -1503,7 +1593,7 @@ static const __devinitdata struct usb_device_id device_table[] = { /*bw600.inf:*/ {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/ {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)}, -/* {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */ + {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)}, /* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */ #ifndef CONFIG_USB_SN9C102 {USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)}, From f75c4950bb6e677e89479192b2ecfbec0beab14e Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:35 -0300 Subject: [PATCH 399/638] V4L/DVB (8675): gspca: Pixmap PJPG (Pixart 73xx JPEG) added, generated by pac7311. The JPEG frames generated by the Pixart 73xx have: - special markers 'ff ff ff xx' every 1024/512 bytes, - unused 8 bits at end of JPEG blocks, and then ask for a new pixel format. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 200 ++-------------------------- include/linux/videodev2.h | 1 + 2 files changed, 10 insertions(+), 191 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 85d9ddbc5b7..3c9f2b14ca8 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -22,6 +22,7 @@ #define MODULE_NAME "pac7311" #include "gspca.h" +#include "jpeg.h" MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li"); MODULE_DESCRIPTION("Pixart PAC7311"); @@ -40,7 +41,6 @@ struct sd { unsigned char colors; unsigned char autogain; - char ffnb; /* number of 'ff' in the previous frame */ char tosof; /* number of bytes before next start of frame */ signed char ag_cnt; #define AG_CNT_START 13 @@ -121,95 +121,23 @@ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format vga_mode[] = { - {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + {160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE, .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 2}, - {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + {320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, - {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, + {640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE, .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; -#define PAC7311_JPEG_HEADER_SIZE (sizeof pac7311_jpeg_header) /* (594) */ - -static const __u8 pac7311_jpeg_header[] = { - 0xff, 0xd8, - 0xff, 0xe0, 0x00, 0x03, 0x20, - 0xff, 0xc0, 0x00, 0x11, 0x08, - 0x01, 0xe0, /* 12: height */ - 0x02, 0x80, /* 14: width */ - 0x03, /* 16 */ - 0x01, 0x21, 0x00, - 0x02, 0x11, 0x01, - 0x03, 0x11, 0x01, - 0xff, 0xdb, 0x00, 0x84, - 0x00, 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 0x0d, - 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 0x1a, 0x18, 0x16, - 0x16, 0x18, 0x31, 0x23, 0x25, 0x1d, 0x28, 0x3a, 0x33, 0x3d, - 0x3c, 0x39, 0x33, 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, - 0x44, 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 0x5f, - 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, 0x79, 0x70, 0x64, - 0x78, 0x5c, 0x65, 0x67, 0x63, 0x01, 0x11, 0x12, 0x12, 0x18, - 0x15, 0x18, 0x2f, 0x1a, 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, - 0xff, 0xc4, 0x01, 0xa2, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - 0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02, - 0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7d, - 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31, - 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32, - 0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, - 0xd1, 0xf0, 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, - 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, - 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, - 0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, - 0x58, 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, - 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83, - 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, - 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, - 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, - 0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, - 0xe9, 0xea, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, - 0xf9, 0xfa, 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, - 0x0b, 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04, - 0x07, 0x05, 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01, - 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41, - 0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, - 0x42, 0x91, 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, - 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25, - 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a, - 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, - 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, - 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, - 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82, 0x83, - 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, - 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, - 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, - 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, - 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, - 0xd9, 0xda, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, - 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, - 0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, - 0x11, 0x00, 0x3f, 0x00 -}; - /* pac 7302 */ static const __u8 probe_7302[] = { /* index,value */ @@ -566,7 +494,6 @@ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - sd->ffnb = 0; sd->tosof = 0; if (sd->sensor == SENSOR_PAC7302) @@ -699,34 +626,6 @@ static void do_autogain(struct gspca_dev *gspca_dev) } } -/* output the jpeg header */ -static void put_jpeg_head(struct gspca_dev *gspca_dev, - struct gspca_frame *frame) -{ - struct sd *sd = (struct sd *) gspca_dev; - unsigned char tmpbuf[4]; - - if (sd->ag_cnt >= 0) { - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - atomic_set(&sd->avg_lum, sd->lum_sum / AG_CNT_START); - atomic_set(&sd->do_gain, 1); - } - } - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, - (__u8 *) pac7311_jpeg_header, - 12); - tmpbuf[0] = gspca_dev->height >> 8; - tmpbuf[1] = gspca_dev->height & 0xff; - tmpbuf[2] = gspca_dev->width >> 8; - tmpbuf[3] = gspca_dev->width & 0xff; - gspca_frame_add(gspca_dev, INTER_PACKET, frame, - tmpbuf, 4); - gspca_frame_add(gspca_dev, INTER_PACKET, frame, - (__u8 *) &pac7311_jpeg_header[16], - PAC7311_JPEG_HEADER_SIZE - 16); -} - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ @@ -739,24 +638,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, #define INTER_FRAME 0x53 /* eof + inter frame + sof */ #define LUM_OFFSET 0x1e /* reverse offset / start of frame */ -/*fixme:test+*/ -/* dump the packet */ - if (gspca_debug & 0x200) { - static char tmp[50]; - - PDEBUG(0x200, "pkt_scan"); - tmp[0] = 0; - for (i = 0; i < len; i++) { - if (i % 16 == 0 && i != 0) { - PDEBUG(0x200, "%s", tmp); - tmp[0] = 0; - } - sprintf(&tmp[(i % 16) * 3], "%02x ", data[i]); - } - if (tmp[0] != 0) - PDEBUG(0x200, "%s", tmp); - } -/*fixme:test-*/ /* * inside a frame, there may be: * escaped ff ('ff 00') @@ -767,47 +648,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, * 0x33 bytes * one byte luminosity * 0x16 bytes - * ff ff 00 ff 96 62 44 start of frame header + * ff ff 00 ff 96 62 44 start of frame */ - if (sd->tosof == 0) { /* if inside a frame */ - - /* check for 'ff ff ff xx' at start and at end of packet */ - /* (len is always >= 3 and xx never ff) */ - switch (sd->ffnb) { - case 1: - if (data[0] != 0xff) { /* can be '00' only */ - __u8 ff; - - sd->ffnb = 0; - ff = 0xff; - gspca_frame_add(gspca_dev, INTER_PACKET, - frame, &ff, 1); - break; /* keep 'ff 00' */ - } - /* fall thru */ - case 2: - case 3: - data += 4 - sd->ffnb; - len -= 4 - sd->ffnb; - sd->ffnb = 0; - break; - } - if (data[len - 1] == 0xff) { - if (data[len - 2] == 0xff) { - if (data[len - 3] == 0xff) { - sd->ffnb = 3; - len -= 3; - } else { - sd->ffnb = 2; - len -= 2; - } - } else { - sd->ffnb = 1; - len--; - } - } - } else { /* outside a frame */ + if (sd->tosof != 0) { /* if outside a frame */ /* get the luminosity and go to the start of frame */ data += sd->tosof; @@ -815,14 +659,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, if (sd->tosof > LUM_OFFSET) sd->lum_sum += data[-LUM_OFFSET]; sd->tosof = 0; - put_jpeg_head(gspca_dev, frame); + jpeg_put_header(gspca_dev, frame, 1, 0x21); } for (i = 0; i < len; i++) { if (data[i] != 0xff) continue; switch (data[i + 1]) { - case 0xd9: /* end of frame */ + case 0xd9: /* 'ff d9' end of frame */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, i + 2); @@ -835,33 +679,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, sd->tosof = -len; break; } - put_jpeg_head(gspca_dev, frame); - break; - case 0xff: /* 'ff ff ff xx' */ -/*fixme:test+*/ -/* is there a start of frame ? */ - if (data[i + 2] == 0x00) { - static __u8 ffd9[2] = {0xff, 0xd9}; - - gspca_frame_add(gspca_dev, - INTER_PACKET, - frame, data, - i + 7 - INTER_FRAME); - frame = gspca_frame_add(gspca_dev, - LAST_PACKET, - frame, ffd9, 2); - data += i + 7; - len -= i + 7; - i = 0; - put_jpeg_head(gspca_dev, frame); - break; - } -/*fixme:test-*/ - gspca_frame_add(gspca_dev, INTER_PACKET, - frame, data, i); - data += i + 4; - len -= i + 4; - i = 0; + jpeg_put_header(gspca_dev, frame, 1, 0x21); break; } } diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index e65a6bed4e3..6c73516b74c 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -334,6 +334,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SPCA508 v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */ #define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ +#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ /* * F O R M A T E N U M E R A T I O N From c7087f56a42b0aa82b181d9a08a376c4add7a683 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 3 Sep 2008 16:47:36 -0300 Subject: [PATCH 400/638] V4L/DVB (8678): Remove the dead CONFIG_RADIO_MIROPCM20{,_RDS} code The CONFIG_RADIO_MIROPCM20{,_RDS} code became dead code 1.5 years ago. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Makefile | 4 - drivers/media/radio/miropcm20-radio.c | 266 ----------------------- drivers/media/radio/miropcm20-rds-core.c | 211 ------------------ drivers/media/radio/miropcm20-rds-core.h | 19 -- drivers/media/radio/miropcm20-rds.c | 136 ------------ 5 files changed, 636 deletions(-) delete mode 100644 drivers/media/radio/miropcm20-radio.c delete mode 100644 drivers/media/radio/miropcm20-rds-core.c delete mode 100644 drivers/media/radio/miropcm20-rds-core.h delete mode 100644 drivers/media/radio/miropcm20-rds.c diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index a30159f6fa4..7ca71ab96b4 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -2,8 +2,6 @@ # Makefile for the kernel character device drivers. # -miropcm20-objs := miropcm20-rds-core.o miropcm20-radio.o - obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o @@ -14,8 +12,6 @@ obj-$(CONFIG_RADIO_TERRATEC) += radio-terratec.o obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o -obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o -obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c deleted file mode 100644 index 7fd7ee2d32c..00000000000 --- a/drivers/media/radio/miropcm20-radio.c +++ /dev/null @@ -1,266 +0,0 @@ -/* Miro PCM20 radio driver for Linux radio support - * (c) 1998 Ruurd Reitsma - * Thanks to Norberto Pellici for the ACI device interface specification - * The API part is based on the radiotrack driver by M. Kirkwood - * This driver relies on the aci mixer (drivers/sound/aci.c) - * Look there for further info... - */ - -/* Revision history: - * - * 1998 Ruurd Reitsma - * 2000-09-05 Robert Siemer - * removed unfinished volume control (maybe adding it later again) - * use OSS-mixer; added stereo control - */ - -/* What ever you think about the ACI, version 0x07 is not very well! - * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono - * conditions... Robert - */ - -#include -#include -#include -#include -#include -#include "oss/aci.h" -#include "miropcm20-rds-core.h" - -static int radio_nr = -1; -module_param(radio_nr, int, 0); - -struct pcm20_device { - unsigned long freq; - int muted; - int stereo; -}; - - -static int pcm20_mute(struct pcm20_device *dev, unsigned char mute) -{ - dev->muted = mute; - return aci_write_cmd(ACI_SET_TUNERMUTE, mute); -} - -static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo) -{ - dev->stereo = stereo; - return aci_write_cmd(ACI_SET_TUNERMONO, !stereo); -} - -static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq) -{ - unsigned char freql; - unsigned char freqh; - - dev->freq=freq; - - freq /= 160; - if (!(aci_version==0x07 || aci_version>=0xb0)) - freq /= 10; /* I don't know exactly which version - * needs this hack */ - freql = freq & 0xff; - freqh = freq >> 8; - - aci_rds_cmd(RDS_RESET, NULL, 0); - pcm20_stereo(dev, 1); - - return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh); -} - -static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal) -{ - /* okay, check for signal, stereo and rds here... */ - int i; - unsigned char buf; - - if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0) - return i; - pr_debug("check_sig: 0x%x\n", i); - if (i & 0x80) { - /* no signal from tuner */ - *flags=0; - *signal=0; - return 0; - } else - *signal=0xffff; - - if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0) - return i; - if (i & 0x40) { - *flags=0; - } else { - /* stereo */ - *flags=VIDEO_TUNER_STEREO_ON; - /* I can't see stereo, when forced to mono */ - dev->stereo=1; - } - - if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0) - return i; - if (buf & 1) - /* RDS available */ - *flags|=VIDEO_TUNER_RDS_ON; - else - return 0; - - if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0) - return i; - pr_debug("rds-signal: %d\n", buf); - if (buf > 15) { - printk("miropcm20-radio: RX strengths unexpected high...\n"); - buf=15; - } - /* refine signal */ - if ((*signal=SCALE(15, 0xffff, buf))==0) - *signal = 1; - - return 0; -} - -static int pcm20_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) -{ - struct video_device *dev = video_devdata(file); - struct pcm20_device *pcm20 = dev->priv; - int i; - - switch(cmd) - { - case VIDIOCGCAP: - { - struct video_capability *v = arg; - memset(v,0,sizeof(*v)); - v->type=VID_TYPE_TUNER; - strcpy(v->name, "Miro PCM20"); - v->channels=1; - v->audios=1; - return 0; - } - case VIDIOCGTUNER: - { - struct video_tuner *v = arg; - if(v->tuner) /* Only 1 tuner */ - return -EINVAL; - v->rangelow=87*16000; - v->rangehigh=108*16000; - pcm20_getflags(pcm20, &v->flags, &v->signal); - v->flags|=VIDEO_TUNER_LOW; - v->mode=VIDEO_MODE_AUTO; - strcpy(v->name, "FM"); - return 0; - } - case VIDIOCSTUNER: - { - struct video_tuner *v = arg; - if(v->tuner!=0) - return -EINVAL; - /* Only 1 tuner so no setting needed ! */ - return 0; - } - case VIDIOCGFREQ: - { - unsigned long *freq = arg; - *freq = pcm20->freq; - return 0; - } - case VIDIOCSFREQ: - { - unsigned long *freq = arg; - pcm20->freq = *freq; - i=pcm20_setfreq(pcm20, pcm20->freq); - pr_debug("First view (setfreq): 0x%x\n", i); - return i; - } - case VIDIOCGAUDIO: - { - struct video_audio *v = arg; - memset(v,0, sizeof(*v)); - v->flags=VIDEO_AUDIO_MUTABLE; - if (pcm20->muted) - v->flags|=VIDEO_AUDIO_MUTE; - v->mode=VIDEO_SOUND_STEREO; - if (pcm20->stereo) - v->mode|=VIDEO_SOUND_MONO; - /* v->step=2048; */ - strcpy(v->name, "Radio"); - return 0; - } - case VIDIOCSAUDIO: - { - struct video_audio *v = arg; - if(v->audio) - return -EINVAL; - - pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE)); - if(v->flags&VIDEO_SOUND_MONO) - pcm20_stereo(pcm20, 0); - if(v->flags&VIDEO_SOUND_STEREO) - pcm20_stereo(pcm20, 1); - - return 0; - } - default: - return -ENOIOCTLCMD; - } -} - -static int pcm20_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl); -} - -static struct pcm20_device pcm20_unit = { - .freq = 87*16000, - .muted = 1, -}; - -static const struct file_operations pcm20_fops = { - .owner = THIS_MODULE, - .open = video_exclusive_open, - .release = video_exclusive_release, - .ioctl = pcm20_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = v4l_compat_ioctl32, -#endif - .llseek = no_llseek, -}; - -static struct video_device pcm20_radio = { - .name = "Miro PCM 20 radio", - .fops = &pcm20_fops, - .priv = &pcm20_unit -}; - -static int __init pcm20_init(void) -{ - if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1) - goto video_register_device; - - if(attach_aci_rds()<0) - goto attach_aci_rds; - - printk(KERN_INFO "Miro PCM20 radio card driver.\n"); - - return 0; - - attach_aci_rds: - video_unregister_device(&pcm20_radio); - video_register_device: - return -EINVAL; -} - -MODULE_AUTHOR("Ruurd Reitsma"); -MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card."); -MODULE_LICENSE("GPL"); - -static void __exit pcm20_cleanup(void) -{ - unload_aci_rds(); - video_unregister_device(&pcm20_radio); -} - -module_init(pcm20_init); -module_exit(pcm20_cleanup); diff --git a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c deleted file mode 100644 index 9428d8b2642..00000000000 --- a/drivers/media/radio/miropcm20-rds-core.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Many thanks to Fred Seidel , the - * designer of the RDS decoder hardware. With his help - * I was able to code this driver. - * Thanks also to Norberto Pellicci, Dominic Mounteney - * and www.teleauskunft.de - * for good hints on finding Fred. It was somewhat hard - * to locate him here in Germany... [: - * - * Revision history: - * - * 2000-08-09 Robert Siemer - * RDS support for MiroSound PCM20 radio - */ - -#include -#include -#include -#include -#include -#include - -#include -#include "oss/aci.h" -#include "miropcm20-rds-core.h" - -#define DEBUG 0 - -static struct mutex aci_rds_mutex; - -#define RDS_DATASHIFT 2 /* Bit 2 */ -#define RDS_DATAMASK (1 << RDS_DATASHIFT) -#define RDS_BUSYMASK 0x10 /* Bit 4 */ -#define RDS_CLOCKMASK 0x08 /* Bit 3 */ - -#define RDS_DATA(x) (((x) >> RDS_DATASHIFT) & 1) - - -#if DEBUG -static void print_matrix(char array[], unsigned int length) -{ - int i, j; - - for (i=0; i=0; j--) { - printk("%d", (array[i] >> j) & 0x1); - } - if (i%8 == 0) - printk(" byte-border\n"); - else - printk("\n"); - } -} -#endif /* DEBUG */ - -static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size) -{ - int i; - - if (size != 8) - return -1; - for (i = 7; i >= 0; i--) - sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0; - sendbuffer[0] |= RDS_CLOCKMASK; - - return 0; -} - -static int rds_waitread(void) -{ - unsigned char byte; - int i=2000; - - do { - byte=inb(RDS_REGISTER); - i--; - } - while ((byte & RDS_BUSYMASK) && i); - - if (i) { - #if DEBUG - printk(KERN_DEBUG "rds_waitread()"); - print_matrix(&byte, 1); - #endif - return (byte); - } else { - printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n"); - return -1; - } -} - -/* don't use any ..._nowait() function if you are not sure what you do... */ - -static inline void rds_rawwrite_nowait(unsigned char byte) -{ - #if DEBUG - printk(KERN_DEBUG "rds_rawwrite()"); - print_matrix(&byte, 1); - #endif - outb(byte, RDS_REGISTER); -} - -static int rds_rawwrite(unsigned char byte) -{ - if (rds_waitread() >= 0) { - rds_rawwrite_nowait(byte); - return 0; - } else - return -1; -} - -static int rds_write(unsigned char cmd) -{ - unsigned char sendbuffer[8]; - int i; - - if (byte2trans(cmd, sendbuffer, 8) != 0){ - return -1; - } else { - for (i=0; i<8; i++) { - rds_rawwrite(sendbuffer[i]); - } - } - return 0; -} - -static int rds_readcycle_nowait(void) -{ - rds_rawwrite_nowait(0); - return rds_waitread(); -} - -static int rds_readcycle(void) -{ - if (rds_rawwrite(0) < 0) - return -1; - return rds_waitread(); -} - -static int rds_read(unsigned char databuffer[], int datasize) -{ - #define READSIZE (8*datasize) - - int i,j; - - if (datasize < 1) /* nothing to read */ - return 0; - - /* to be able to use rds_readcycle_nowait() - I have to waitread() here */ - if (rds_waitread() < 0) - return -1; - - memset(databuffer, 0, datasize); - - for (i=0; i< READSIZE; i++) - if((j=rds_readcycle_nowait()) < 0) { - return -1; - } else { - databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8))); - } - - return 0; -} - -static int rds_ack(void) -{ - int i=rds_readcycle(); - - if (i < 0) - return -1; - if (i & RDS_DATAMASK) { - return 0; /* ACK */ - } else { - printk(KERN_DEBUG "aci-rds: NACK\n"); - return 1; /* NACK */ - } -} - -int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize) -{ - int ret; - - if (mutex_lock_interruptible(&aci_rds_mutex)) - return -EINTR; - - rds_write(cmd); - - /* RDS_RESET doesn't need further processing */ - if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize))) - ret = -1; - else - ret = 0; - - mutex_unlock(&aci_rds_mutex); - - return ret; -} -EXPORT_SYMBOL(aci_rds_cmd); - -int __init attach_aci_rds(void) -{ - mutex_init(&aci_rds_mutex); - return 0; -} - -void __exit unload_aci_rds(void) -{ -} -MODULE_LICENSE("GPL"); diff --git a/drivers/media/radio/miropcm20-rds-core.h b/drivers/media/radio/miropcm20-rds-core.h deleted file mode 100644 index aeb5761f046..00000000000 --- a/drivers/media/radio/miropcm20-rds-core.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _MIROPCM20_RDS_CORE_H_ -#define _MIROPCM20_RDS_CORE_H_ - -extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize); - -#define RDS_STATUS 0x01 -#define RDS_STATIONNAME 0x02 -#define RDS_TEXT 0x03 -#define RDS_ALTFREQ 0x04 -#define RDS_TIMEDATE 0x05 -#define RDS_PI_CODE 0x06 -#define RDS_PTYTATP 0x07 -#define RDS_RESET 0x08 -#define RDS_RXVALUE 0x09 - -extern void __exit unload_aci_rds(void); -extern int __init attach_aci_rds(void); - -#endif /* _MIROPCM20_RDS_CORE_H_ */ diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c deleted file mode 100644 index 3e840f74d45..00000000000 --- a/drivers/media/radio/miropcm20-rds.c +++ /dev/null @@ -1,136 +0,0 @@ -/* MiroSOUND PCM20 radio rds interface driver - * (c) 2001 Robert Siemer - * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information. - */ - -/* Revision history: - * - * 2001-04-18 Robert Siemer - * separate file for user interface driver - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "miropcm20-rds-core.h" - -static char * text_buffer; -static int rds_users; - - -static int rds_f_open(struct inode *in, struct file *fi) -{ - if (rds_users) - return -EBUSY; - - lock_kernel(); - rds_users++; - if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) { - rds_users--; - printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n"); - unlock_kernel(); - return -ENOMEM; - } - - unlock_kernel(); - return 0; -} - -static int rds_f_release(struct inode *in, struct file *fi) -{ - kfree(text_buffer); - - rds_users--; - return 0; -} - -static void print_matrix(char *ch, char out[]) -{ - int j; - - for (j=7; j>=0; j--) { - out[7-j] = ((*ch >> j) & 0x1) + '0'; - } -} - -static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset) -{ -// i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset); - - char c; - char bits[8]; - - msleep(2000); - aci_rds_cmd(RDS_STATUS, &c, 1); - print_matrix(&c, bits); - if (copy_to_user(buffer, bits, 8)) - return -EFAULT; - -/* if ((c >> 3) & 1) { - aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8); - text_buffer[0] = ' ' ; - text_buffer[9] = '\n'; - return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18; - } -*/ -/* if ((c >> 6) & 1) { - aci_rds_cmd(RDS_PTYTATP, &c, 1); - if ( c & 1) - sprintf(text_buffer, " M"); - else - sprintf(text_buffer, " S"); - if ((c >> 1) & 1) - sprintf(text_buffer+2, " TA"); - else - sprintf(text_buffer+2, " --"); - if ((c >> 7) & 1) - sprintf(text_buffer+5, " TP"); - else - sprintf(text_buffer+5, " --"); - sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f); - return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20; - } -*/ - - if ((c >> 4) & 1) { - aci_rds_cmd(RDS_TEXT, text_buffer, 65); - text_buffer[0] = ' ' ; - text_buffer[65] = '\n'; - return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8; - } else { - put_user('\n', buffer+8); - return 9; - } -} - -static const struct file_operations rds_fops = { - .owner = THIS_MODULE, - .read = rds_f_read, - .open = rds_f_open, - .release = rds_f_release -}; - -static struct miscdevice rds_miscdev = { - .minor = MISC_DYNAMIC_MINOR, - .name = "radiotext", - .fops = &rds_fops, -}; - -static int __init miropcm20_rds_init(void) -{ - return misc_register(&rds_miscdev); -} - -static void __exit miropcm20_rds_cleanup(void) -{ - misc_deregister(&rds_miscdev); -} - -module_init(miropcm20_rds_init); -module_exit(miropcm20_rds_cleanup); -MODULE_LICENSE("GPL"); From b045979d61b235cd9cc8347760fcfb44fc8ecbd6 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 3 Sep 2008 16:47:38 -0300 Subject: [PATCH 401/638] V4L/DVB (8681): v4l2-ioctl.c: fix warning drivers/media/video/v4l2-ioctl.c:496: warning: format '%08ld' expects type 'long int', but argument 5 has type 'suseconds_t' Signed-off-by: Alexander Beregalov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 88c0465aede..140ef92c19c 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -499,7 +499,7 @@ static void dbgbuf(unsigned int cmd, struct video_device *vfd, p->timestamp.tv_sec / 3600, (int)(p->timestamp.tv_sec / 60) % 60, (int)(p->timestamp.tv_sec % 60), - p->timestamp.tv_usec, + (long)p->timestamp.tv_usec, p->index, prt_names(p->type, v4l2_type_names), p->bytesused, p->flags, From 46f2c21cfdb1a829a9a23e23562ffa66b007dc48 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Wed, 3 Sep 2008 16:47:39 -0300 Subject: [PATCH 402/638] V4L/DVB (8682): V4L: fix return value of register video func If a wrong device type is used with video_register_device_index() it should better return an error number, instead of a constant. Signed-off-by: Henrik Kretzschmar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 6f36006aecd..0320fb84119 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -281,7 +281,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, default: printk(KERN_ERR "%s called with unknown type: %d\n", __func__, type); - return -1; + return -EINVAL; } /* pick a minor number */ From 0058717a1ef0c87deeccbe0a3b17def173fee9a9 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 3 Sep 2008 16:47:50 -0300 Subject: [PATCH 403/638] V4L/DVB (8701): cx18: Add missing lock for when the irq handler manipulates the queues cx18: Add missing lock for when the irq handler manipulates the queues. This was a potential source of stream queue corruption. Also changed the name of cx18_queue_find_buf() to cx18_queue_get_buf_irq(). Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-irq.c | 2 +- drivers/media/video/cx18/cx18-queue.c | 23 +++++++++++++---------- drivers/media/video/cx18/cx18-queue.h | 2 +- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 25114a5cbd5..ab218315c84 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -61,7 +61,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) CX18_WARN("Ack struct = %d for %s\n", mb->args[2], s->name); id = read_enc(off); - buf = cx18_queue_find_buf(s, id, read_enc(off + 4)); + buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4)); CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id); if (buf) { cx18_buf_sync_for_cpu(s, buf); diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index 6990b77c620..8a4dd821fd9 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -78,12 +78,13 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) return buf; } -struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id, +struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, u32 bytesused) { struct cx18 *cx = s->cx; struct list_head *p; + spin_lock(&s->qlock); list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); @@ -92,17 +93,19 @@ struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id, continue; buf->bytesused = bytesused; /* the transport buffers are handled differently, - so there is no need to move them to the full queue */ - if (s->type == CX18_ENC_STREAM_TYPE_TS) - return buf; - s->q_free.buffers--; - s->q_free.length -= s->buf_size; - s->q_full.buffers++; - s->q_full.length += s->buf_size; - s->q_full.bytesused += buf->bytesused; - list_move_tail(&buf->list, &s->q_full.list); + they are not moved to the full queue */ + if (s->type != CX18_ENC_STREAM_TYPE_TS) { + s->q_free.buffers--; + s->q_free.length -= s->buf_size; + s->q_full.buffers++; + s->q_full.length += s->buf_size; + s->q_full.bytesused += buf->bytesused; + list_move_tail(&buf->list, &s->q_full.list); + } + spin_unlock(&s->qlock); return buf; } + spin_unlock(&s->qlock); CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name); return NULL; } diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h index 91423b9863a..7f93bb13c09 100644 --- a/drivers/media/video/cx18/cx18-queue.h +++ b/drivers/media/video/cx18/cx18-queue.h @@ -46,7 +46,7 @@ void cx18_queue_init(struct cx18_queue *q); void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf, struct cx18_queue *q); struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q); -struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id, +struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, u32 bytesused); void cx18_flush_queues(struct cx18_stream *s); From d698dc6b0477d3165a7f320b3ce36d1cbd361c94 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:51 -0300 Subject: [PATCH 404/638] V4L/DVB (8703): gspca: Do controls work for spca561 revision 12a. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 73 ++++++++++++++++++----------- 1 file changed, 46 insertions(+), 27 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 0a2b8bc5b85..0a1e66201a6 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -38,9 +38,9 @@ struct sd { #define CONTRAST_MAX 0x3fff __u16 exposure; /* rev12a only */ -#define EXPOSURE_MIN 0x0120 +#define EXPOSURE_MIN 0x2001 #define EXPOSURE_DEF 0x20ae -#define EXPOSURE_MAX 0x5720 +#define EXPOSURE_MAX 0x421d __u8 brightness; /* rev72a only */ #define BRIGHTNESS_MIN 0 @@ -62,6 +62,9 @@ struct sd { #define GAIN_DEF 0x24 #define GAIN_MAX 0x24 +#define EXPO12A_DEF 3 + __u8 expo12a; /* expo/gain? for rev 12a */ + __u8 chip_revision; #define Rev012A 0 #define Rev072A 1 @@ -553,6 +556,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->exposure = EXPOSURE_DEF; sd->autogain = AUTOGAIN_DEF; sd->gain = GAIN_DEF; + sd->expo12a = EXPO12A_DEF; return 0; } @@ -609,12 +613,9 @@ static void setwhite(struct gspca_dev *gspca_dev) return; } /* try to emulate MS-win as possible */ - if (white < 0x45) - reg8616 = white; - else - reg8616 = 0x93 + (white >> 2); - reg8614 = 0x28 + (white >> 4); + reg8616 = 0x90 - white * 5 / 8; reg_w_val(gspca_dev->dev, 0x8616, reg8616); + reg8614 = 0x20 + white * 3 / 8; reg_w_val(gspca_dev->dev, 0x8614, reg8614); } @@ -622,30 +623,32 @@ static void setwhite(struct gspca_dev *gspca_dev) static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; + __u8 data[2]; - reg_w_val(dev, 0x8309, sd->gain); + data[0] = sd->exposure; + data[1] = sd->exposure >> 8; + reg_w_buf(gspca_dev, 0x8309, data, 2); } /* rev 12a only */ static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; + __u8 data[2]; - reg_w_val(dev, 0x8335, sd->gain); + data[0] = sd->gain; + data[1] = 0; + reg_w_buf(gspca_dev, 0x8335, data, 2); } static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->chip_revision == Rev072A) { - if (sd->autogain) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; - } + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; } static void sd_start_12a(struct gspca_dev *gspca_dev) @@ -684,6 +687,7 @@ static void sd_start_12a(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x850b, 0x03); setcontrast(gspca_dev); setwhite(gspca_dev); + setautogain(gspca_dev); } static void sd_start_72a(struct gspca_dev *gspca_dev) { @@ -713,12 +717,24 @@ static void sd_start_72a(struct gspca_dev *gspca_dev) static void sd_stopN(struct gspca_dev *gspca_dev) { - reg_w_val(gspca_dev->dev, 0x8112, 0x20); - reg_w_val(gspca_dev->dev, 0x8102, 0x00); /* white balance - new */ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->chip_revision == Rev012A) { + reg_w_val(gspca_dev->dev, 0x8112, 0x0e); + } else { + reg_w_val(gspca_dev->dev, 0x8112, 0x20); +/* reg_w_val(gspca_dev->dev, 0x8102, 0x00); ?? */ + } } static void sd_stop0(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->chip_revision == Rev012A) { + reg_w_val(gspca_dev->dev, 0x8118, 0x29); + reg_w_val(gspca_dev->dev, 0x8114, 0x08); + } } /* this function is called at close time */ @@ -727,7 +743,6 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8114, 0); } -/* rev72a only */ static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -739,6 +754,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) __u8 luma_mean = 110; __u8 luma_delta = 20; __u8 spring = 4; + __u8 reg8339[2]; if (sd->ag_cnt < 0) return; @@ -793,13 +809,16 @@ static void do_autogain(struct gspca_dev *gspca_dev) } break; case Rev012A: - /* sensor registers is access and memory mapped to 0x8300 */ - /* readind all 0x83xx block the sensor */ - /* - * The data from the header seem wrong where is the luma - * and chroma mean value - * at the moment set exposure in contrast set - */ + reg_r(gspca_dev, 0x8330, 2); + if (gspca_dev->usb_buf[1] > 0x08) { + reg8339[0] = ++sd->expo12a; + reg8339[1] = 0; + reg_w_buf(gspca_dev, 0x8339, reg8339, 2); + } else if (gspca_dev->usb_buf[1] < 0x02) { + reg8339[0] = --sd->expo12a; + reg8339[1] = 0; + reg_w_buf(gspca_dev, 0x8339, reg8339, 2); + } break; } } From 3a1ea7050345734acc3a33b2b00a611b9b7bf640 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:55 -0300 Subject: [PATCH 405/638] V4L/DVB (8705): gspca: Adjust some control limits in spca561. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 0a1e66201a6..ec575f5672d 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -38,9 +38,9 @@ struct sd { #define CONTRAST_MAX 0x3fff __u16 exposure; /* rev12a only */ -#define EXPOSURE_MIN 0x2001 -#define EXPOSURE_DEF 0x20ae -#define EXPOSURE_MAX 0x421d +#define EXPOSURE_MIN 0 +#define EXPOSURE_DEF 200 +#define EXPOSURE_MAX 762 __u8 brightness; /* rev72a only */ #define BRIGHTNESS_MIN 0 @@ -48,7 +48,7 @@ struct sd { #define BRIGHTNESS_MAX 63 __u8 white; /* rev12a only */ -#define WHITE_MIN 0 +#define WHITE_MIN 1 #define WHITE_DEF 0x40 #define WHITE_MAX 0x7f @@ -608,10 +608,6 @@ static void setwhite(struct gspca_dev *gspca_dev) __u8 reg8614, reg8616; white = sd->white; - if (sd->white == 0) { - PDEBUG(D_CONF, "Discarding null whiteness"); - return; - } /* try to emulate MS-win as possible */ reg8616 = 0x90 - white * 5 / 8; reg_w_val(gspca_dev->dev, 0x8616, reg8616); @@ -623,10 +619,12 @@ static void setwhite(struct gspca_dev *gspca_dev) static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + int expo; __u8 data[2]; - data[0] = sd->exposure; - data[1] = sd->exposure >> 8; + expo = sd->exposure + 0x20a8; /* from test */ + data[0] = expo; + data[1] = expo >> 8; reg_w_buf(gspca_dev, 0x8309, data, 2); } From dff6d321d421c4c059aea72be70df3a8a200b8a3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:57 -0300 Subject: [PATCH 406/638] V4L/DVB (8706): Make contrast and brightness work for pac7302. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 43 +++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 3c9f2b14ca8..3abc018f969 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -82,9 +82,10 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Contrast", .minimum = 0, - .maximum = 255, +#define CONTRAST_MAX 255 + .maximum = CONTRAST_MAX, .step = 1, -#define CONTRAST_DEF 127 +#define CONTRAST_DEF 60 .default_value = CONTRAST_DEF, }, .set = sd_setcontrast, @@ -94,7 +95,7 @@ static struct ctrl sd_ctrls[] = { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Color", + .name = "Saturation", .minimum = 0, .maximum = 255, .step = 1, @@ -429,13 +430,42 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } +/* rev 12a only */ +static void setbrightcont(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, v; + static const __u8 max[10] = + {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb, + 0xd4, 0xec}; + static const __u8 delta[10] = + {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17, + 0x11, 0x0b}; + + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + for (i = 0; i < 10; i++) { + v = max[i]; + v += (sd->brightness - BRIGHTNESS_MAX) + * 150 / BRIGHTNESS_MAX; /* 200 ? */ + v -= delta[i] * sd->contrast / CONTRAST_MAX; + if (v < 0) + v = 0; + else if (v > 0xff) + v = 0xff; + reg_w(gspca_dev, 0xa2 + i, v); + } + reg_w(gspca_dev, 0xdc, 0x01); +} + static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int brightness; - if (sd->sensor == SENSOR_PAC7302) + if (sd->sensor == SENSOR_PAC7302) { + setbrightcont(gspca_dev); return; + } /*jfm: inverted?*/ brightness = BRIGHTNESS_MAX - sd->brightness; reg_w(gspca_dev, 0xff, 0x04); @@ -449,13 +479,14 @@ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_PAC7302) + if (sd->sensor == SENSOR_PAC7302) { + setbrightcont(gspca_dev); return; + } reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x80, sd->contrast); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); - PDEBUG(D_CONF|D_STREAM, "contrast: %i", sd->contrast); } static void setcolors(struct gspca_dev *gspca_dev) From 41b469745f6218efb22bec4e3940b085ffb97216 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:58 -0300 Subject: [PATCH 407/638] V4L/DVB (8707): gspca: Colors, hflip and vflip controls added for pac7302. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 107 +++++++++++++++++++++++++++- 1 file changed, 105 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 3abc018f969..a89cc9fd153 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -40,6 +40,8 @@ struct sd { unsigned char contrast; unsigned char colors; unsigned char autogain; + __u8 hflip; + __u8 vflip; char tosof; /* number of bytes before next start of frame */ signed char ag_cnt; @@ -59,6 +61,10 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { { @@ -97,7 +103,8 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Saturation", .minimum = 0, - .maximum = 255, +#define COLOR_MAX 255 + .maximum = COLOR_MAX, .step = 1, #define COLOR_DEF 127 .default_value = COLOR_DEF, @@ -119,6 +126,35 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +/* next controls work with pac7302 only */ + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .step = 1, +#define HFLIP_DEF 0 + .default_value = HFLIP_DEF, + }, + .set = sd_sethflip, + .get = sd_gethflip, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEF 0 + .default_value = VFLIP_DEF, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -493,8 +529,25 @@ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_PAC7302) + if (sd->sensor == SENSOR_PAC7302) { + int i, v; + static const int a[9] = + {217, -212, 0, -101, 170, -67, -38, -315, 355}; + static const int b[9] = + {19, 106, 0, 19, 106, 1, 19, 106, 1}; + + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x11, 0x01); + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + for (i = 0; i < 9; i++) { + v = a[i] * sd->colors / COLOR_MAX + b[i]; + reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); + reg_w(gspca_dev, 0x0f + 2 * i + 1, v); + } + reg_w(gspca_dev, 0xdc, 0x01); return; + } reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x10, sd->colors); /* load registers to sensor (Bit 0, auto clear) */ @@ -514,6 +567,19 @@ static void setautogain(struct gspca_dev *gspca_dev) } } +/* this function is used by pac7302 only */ +static void sethvflip(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 data; + + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + data = (sd->hflip ? 0x00 : 0x08) + | (sd->vflip ? 0x04 : 0x00); + reg_w(gspca_dev, 0x21, data); + reg_w(gspca_dev, 0x11, 0x01); +} + /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { @@ -574,6 +640,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* start stream */ reg_w(gspca_dev, 0xff, 0x01); if (sd->sensor == SENSOR_PAC7302) { + sethvflip(gspca_dev); reg_w(gspca_dev, 0x78, 0x01); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x01); @@ -790,6 +857,42 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hflip = val; + if (gspca_dev->streaming) + sethvflip(gspca_dev); + return 0; +} + +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->hflip; + return 0; +} + +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + if (gspca_dev->streaming) + sethvflip(gspca_dev); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->vflip; + return 0; +} + /* sub-driver description */ static struct sd_desc sd_desc = { .name = MODULE_NAME, From 05b809c702bf297690c63ea78ee117c4dc909028 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:47:59 -0300 Subject: [PATCH 408/638] V4L/DVB (8709): gspca: Fix initialization and controls of sn9x110 - ov7630. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 199 ++++++++++++++--------------- 1 file changed, 97 insertions(+), 102 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 47737bf04c6..b17aaa45270 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -59,6 +59,7 @@ struct sd { #define SENSOR_OV7648 5 #define SENSOR_OV7660 6 unsigned char i2c_base; + __u8 regf1; }; /* V4L2 controls supported by the driver */ @@ -78,7 +79,8 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Brightness", .minimum = 0, - .maximum = 0xffff, +#define BRIGHTNESS_MAX 0xffff + .maximum = BRIGHTNESS_MAX, .step = 1, #define BRIGHTNESS_DEF 0x7fff .default_value = BRIGHTNESS_DEF, @@ -92,7 +94,8 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Contrast", .minimum = 0, - .maximum = 127, +#define CONTRAST_MAX 127 + .maximum = CONTRAST_MAX, .step = 1, #define CONTRAST_DEF 63 .default_value = CONTRAST_DEF, @@ -240,27 +243,16 @@ static const __u8 *sn_tb[] = { sn_ov7660 }; -static const __u8 regsn20[] = { +static const __u8 gamma_def[] = { 0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99, 0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff }; -static const __u8 regsn20_sn9c325[] = { - 0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4, - 0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5 -}; static const __u8 reg84[] = { 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f, 0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f, -/* 0x00, 0x00, 0x00, 0x00, 0x00 */ - 0xf7, 0x0f, 0x0a, 0x00, 0x00 + 0xf7, 0x0f, 0x00, 0x00, 0x00 }; -static const __u8 reg84_sn9c325[] = { - 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f, - 0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f, - 0xf8, 0x0f, 0x00, 0x00, 0x00 -}; - static const __u8 hv7131r_sensor_init[][8] = { {0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10}, {0xB1, 0x11, 0x34, 0x17, 0x7F, 0x00, 0x00, 0x10}, @@ -411,7 +403,7 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10}, /* win: delay 20ms */ {0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10}, -/* win: loop on 2 wwrite, 1 read */ +/* win: i2c_r from 00 to 80 */ {0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10}, {0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10}, {0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10}, @@ -446,9 +438,11 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10}, +/* */ {0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, +/* */ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, {} @@ -778,7 +772,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev, static const __u8 regd4[] = {0x60, 0x00, 0x00}; reg_w1(gspca_dev, 0xf1, 0x00); - reg_w1(gspca_dev, 0x01, 0x00); /*jfm was sn9c1xx[1] in v1*/ + reg_w1(gspca_dev, 0x01, sn9c1xx[1]); /* configure gpio */ reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2); @@ -805,6 +799,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x17, 0x64); reg_w1(gspca_dev, 0x01, 0x42); break; +/*jfm: from win trace */ + case SENSOR_OV7630: + reg_w1(gspca_dev, 0x01, 0x61); + reg_w1(gspca_dev, 0x17, 0xe2); + reg_w1(gspca_dev, 0x01, 0x60); + reg_w1(gspca_dev, 0x01, 0x40); + break; case SENSOR_OV7648: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0xae); @@ -870,9 +871,20 @@ static void ov7630_InitSensor(struct gspca_dev *gspca_dev) { int i = 0; - i2c_w8(gspca_dev, ov7630_sensor_init[i]); + i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 76 01 */ + i++; + i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 (RGB+SRST) */ i++; msleep(20); + i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */ + i++; + i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 */ + i++; + msleep(20); + i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */ + i++; +/*jfm:win i2c_r from 00 to 80*/ + while (ov7630_sensor_init[i][0]) { i2c_w8(gspca_dev, ov7630_sensor_init[i]); i++; @@ -917,6 +929,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->bridge = id->driver_info >> 16; sd->sensor = id->driver_info >> 8; sd->i2c_base = id->driver_info; + sd->regf1 = 0; /*jfm: was 1 in v1*/ sd->qindex = 4; /* set the quantization table */ sd->brightness = BRIGHTNESS_DEF; @@ -969,7 +982,7 @@ static int sd_open(struct gspca_dev *gspca_dev) break; } - reg_w1(gspca_dev, 0xf1, 0x01); + reg_w1(gspca_dev, 0xf1, sd->regf1); return 0; } @@ -1051,6 +1064,28 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, return expo; } +/* this function is used for sensors o76xx only */ +static void setbrightcont(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + unsigned val; + __u8 reg84_full[13]; + + memset(reg84_full, 0, sizeof reg84_full); + val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */ + reg84_full[2] = val; + reg84_full[0] = (val + 1) / 2; + reg84_full[4] = (val + 1) / 5; + if (val > BRIGHTNESS_DEF) + val = (sd->brightness - BRIGHTNESS_DEF) * 0x20 + / BRIGHTNESS_MAX; + else + val = 0; + reg84_full[10] = val; /* 00..1f */ + reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full); +} + +/* sensor != ov76xx */ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1082,6 +1117,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x96, k2); } +/* sensor != ov76xx */ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1175,24 +1211,11 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x07, sn9c1xx[7]); reg_w1(gspca_dev, 0x06, sn9c1xx[6]); reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]); - switch (sd->bridge) { - case BRIDGE_SN9C325: - reg_w(gspca_dev, 0x20, regsn20_sn9c325, - sizeof regsn20_sn9c325); - for (i = 0; i < 8; i++) - reg_w(gspca_dev, 0x84, reg84_sn9c325, - sizeof reg84_sn9c325); - reg_w1(gspca_dev, 0x9a, 0x0a); - reg_w1(gspca_dev, 0x99, 0x60); - break; - default: - reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20); - for (i = 0; i < 8; i++) - reg_w(gspca_dev, 0x84, reg84, sizeof reg84); + reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def); + for (i = 0; i < 8; i++) + reg_w(gspca_dev, 0x84, reg84, sizeof reg84); reg_w1(gspca_dev, 0x9a, 0x08); reg_w1(gspca_dev, 0x99, 0x59); - break; - } mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; if (mode) @@ -1272,8 +1295,18 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x17, reg17); reg_w1(gspca_dev, 0x01, reg1); - setbrightness(gspca_dev); - setcontrast(gspca_dev); + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_MI0360: + case SENSOR_MO4000: + case SENSOR_OM6802: + setbrightness(gspca_dev); + setcontrast(gspca_dev); + break; + default: /* OV76xx */ + setbrightcont(gspca_dev); + break; + } setautogain(gspca_dev); } @@ -1311,7 +1344,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]); reg_w1(gspca_dev, 0x01, sn9c1xx[1]); reg_w1(gspca_dev, 0x01, data); - reg_w1(gspca_dev, 0xf1, 0x01); + reg_w1(gspca_dev, 0xf1, sd->regf1); } static void sd_stop0(struct gspca_dev *gspca_dev) @@ -1409,72 +1442,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } -static unsigned int getexposure(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - __u8 hexpo, mexpo, lexpo; - - switch (sd->sensor) { - case SENSOR_HV7131R: - /* read sensor exposure */ - i2c_r5(gspca_dev, 0x25); - return (gspca_dev->usb_buf[0] << 16) - | (gspca_dev->usb_buf[1] << 8) - | gspca_dev->usb_buf[2]; - case SENSOR_MI0360: - /* read sensor exposure */ - i2c_r5(gspca_dev, 0x09); - return (gspca_dev->usb_buf[0] << 8) - | gspca_dev->usb_buf[1]; - default: -/* case SENSOR_MO4000: */ - i2c_r5(gspca_dev, 0x0e); - hexpo = 0; /* gspca_dev->usb_buf[1] & 0x07; */ - mexpo = 0x40; /* gspca_dev->usb_buf[2] & 0xff; */ - lexpo = (gspca_dev->usb_buf[1] & 0x30) >> 4; - PDEBUG(D_CONF, "exposure %d", - (hexpo << 10) | (mexpo << 2) | lexpo); - return (hexpo << 10) | (mexpo << 2) | lexpo; -#if 0 -/*jfm: not called*/ -/* case SENSOR_OV7648: * jfm: is it ok for 7648? */ -/* case SENSOR_OV7660: */ - /* read sensor exposure */ - i2c_r5(gspca_dev, 0x04); - hexpo = gspca_dev->usb_buf[3] & 0x2f; - lexpo = gspca_dev->usb_buf[0] & 0x02; - i2c_r5(gspca_dev, 0x08); - mexpo = gspca_dev->usb_buf[2]; - return (hexpo << 10) | (mexpo << 2) | lexpo; -#endif - } - /* not reached */ -} - -static void getbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - /* hardcoded registers seem not readable */ - switch (sd->sensor) { - case SENSOR_HV7131R: - sd->brightness = getexposure(gspca_dev) >> 4; - break; - case SENSOR_MI0360: - case SENSOR_MO4000: - case SENSOR_OM6802: - sd->brightness = getexposure(gspca_dev) << 4; - break; - } -} - static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; sd->brightness = val; - if (gspca_dev->streaming) - setbrightness(gspca_dev); + if (gspca_dev->streaming) { + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_MI0360: + case SENSOR_MO4000: + case SENSOR_OM6802: + setbrightness(gspca_dev); + break; + default: /* OV76xx */ + setbrightcont(gspca_dev); + break; + } + } return 0; } @@ -1482,7 +1467,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val) { struct sd *sd = (struct sd *) gspca_dev; - getbrightness(gspca_dev); *val = sd->brightness; return 0; } @@ -1492,8 +1476,19 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->contrast = val; - if (gspca_dev->streaming) - setcontrast(gspca_dev); + if (gspca_dev->streaming) { + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_MI0360: + case SENSOR_MO4000: + case SENSOR_OM6802: + setcontrast(gspca_dev); + break; + default: /* OV76xx */ + setbrightcont(gspca_dev); + break; + } + } return 0; } From d55b83d3c4558d0d118bf20ef3f1fa65b1c75c3d Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:01 -0300 Subject: [PATCH 409/638] V4L/DVB (8710): gspca: Bad color control in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index b17aaa45270..c34e02dccd5 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -794,7 +794,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev, switch (sd->sensor) { case SENSOR_OM6802: - reg_w1(gspca_dev, 0x02, 0x71); + reg_w1(gspca_dev, 0x02, 0x73); /* was 71 */ reg_w1(gspca_dev, 0x01, 0x42); reg_w1(gspca_dev, 0x17, 0x64); reg_w1(gspca_dev, 0x01, 0x42); @@ -1056,7 +1056,7 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev, expo = 0x0001; gainOm[3] = expo >> 2; i2c_w8(gspca_dev, gainOm); - reg_w1(gspca_dev, 0x96, expo >> 5); + reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f); PDEBUG(D_CONF, "set exposure %d", gainOm[3]); break; } @@ -1138,11 +1138,13 @@ static void setcolors(struct gspca_dev *gspca_dev) int colour; colour = sd->colors - 128; - if (colour > 0) + if (colour > 0) { data = (colour + 32) & 0x7f; /* blue */ - else + reg_w1(gspca_dev, 0x06, data); + } else { data = (-colour + 32) & 0x7f; /* red */ - reg_w1(gspca_dev, 0x05, data); + reg_w1(gspca_dev, 0x05, data); + } } static void setautogain(struct gspca_dev *gspca_dev) From 4a18625e88efef2b5a21695edcb2b21d98fdf71b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:02 -0300 Subject: [PATCH 410/638] V4L/DVB (8711): gspca: Bad controls and quantization table of pac7311. Patch adapted from a gspca v1 patch by Thomas Kaiser. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index a89cc9fd153..e4f56e0d3ff 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -42,6 +42,7 @@ struct sd { unsigned char autogain; __u8 hflip; __u8 vflip; + __u8 qindex; char tosof; /* number of bytes before next start of frame */ signed char ag_cnt; @@ -462,6 +463,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->hflip = HFLIP_DEF; + sd->vflip = VFLIP_DEF; + sd->qindex = 3; sd->ag_cnt = -1; return 0; } @@ -505,6 +509,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) /*jfm: inverted?*/ brightness = BRIGHTNESS_MAX - sd->brightness; reg_w(gspca_dev, 0xff, 0x04); + reg_w(gspca_dev, 0x0e, 0x00); reg_w(gspca_dev, 0x0f, brightness); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); @@ -520,7 +525,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) return; } reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x80, sd->contrast); + reg_w(gspca_dev, 0x10, sd->contrast); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); } @@ -549,7 +554,7 @@ static void setcolors(struct gspca_dev *gspca_dev) return; } reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x10, sd->colors); + reg_w(gspca_dev, 0x80, sd->colors); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); @@ -583,7 +588,7 @@ static void sethvflip(struct gspca_dev *gspca_dev) /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { - reg_w(gspca_dev, 0x78, 0x00); /* Turn on LED */ + reg_w(gspca_dev, 0x78, 0x44); /* Turn on LED */ return 0; } @@ -612,27 +617,24 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x20); reg_w(gspca_dev, 0x1b, 0x00); -/* reg_w(gspca_dev, 0x80, 0x69); */ reg_w(gspca_dev, 0x87, 0x10); break; case 1: /* 320x240 pac7311 */ reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); + reg_w(gspca_dev, 0x02, 0x07); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x30); -/* reg_w(gspca_dev, 0x80, 0x3f); */ reg_w(gspca_dev, 0x87, 0x11); break; case 0: /* 640x480 */ if (sd->sensor == SENSOR_PAC7302) break; reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); + reg_w(gspca_dev, 0x02, 0x07); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x08, 0x08); reg_w(gspca_dev, 0x17, 0x00); -/* reg_w(gspca_dev, 0x80, 0x1c); */ reg_w(gspca_dev, 0x87, 0x12); break; } @@ -645,8 +647,8 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x01); } else { - reg_w(gspca_dev, 0x78, 0x04); - reg_w(gspca_dev, 0x78, 0x05); + reg_w(gspca_dev, 0x78, 0x44); + reg_w(gspca_dev, 0x78, 0x45); } } @@ -666,7 +668,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x2a, 0x0e); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x3e, 0x20); - reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */ + reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ } @@ -757,7 +759,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, if (sd->tosof > LUM_OFFSET) sd->lum_sum += data[-LUM_OFFSET]; sd->tosof = 0; - jpeg_put_header(gspca_dev, frame, 1, 0x21); + jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21); } for (i = 0; i < len; i++) { @@ -777,7 +779,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, sd->tosof = -len; break; } - jpeg_put_header(gspca_dev, frame, 1, 0x21); + jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21); break; } } From 759aa3c21ebbab6cc00fc4aebd09b3a7d63715d1 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:03 -0300 Subject: [PATCH 411/638] V4L/DVB (8712): gspca: Bad start of sonixj webcams since changeset a8779025e7e8. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index c34e02dccd5..6673a3edf19 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -59,7 +59,6 @@ struct sd { #define SENSOR_OV7648 5 #define SENSOR_OV7660 6 unsigned char i2c_base; - __u8 regf1; }; /* V4L2 controls supported by the driver */ @@ -929,7 +928,6 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->bridge = id->driver_info >> 16; sd->sensor = id->driver_info >> 8; sd->i2c_base = id->driver_info; - sd->regf1 = 0; /*jfm: was 1 in v1*/ sd->qindex = 4; /* set the quantization table */ sd->brightness = BRIGHTNESS_DEF; @@ -982,7 +980,7 @@ static int sd_open(struct gspca_dev *gspca_dev) break; } - reg_w1(gspca_dev, 0xf1, sd->regf1); + reg_w1(gspca_dev, 0xf1, 0x01); return 0; } @@ -1346,7 +1344,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]); reg_w1(gspca_dev, 0x01, sn9c1xx[1]); reg_w1(gspca_dev, 0x01, data); - reg_w1(gspca_dev, 0xf1, sd->regf1); + reg_w1(gspca_dev, 0xf1, 0x00); } static void sd_stop0(struct gspca_dev *gspca_dev) From 9c5f70f248ccce6d943904e6da687c6ec062f072 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:04 -0300 Subject: [PATCH 412/638] V4L/DVB (8713): gspca: Bad color control again in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 6673a3edf19..19c9791309e 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -108,9 +108,9 @@ static struct ctrl sd_ctrls[] = { .type = V4L2_CTRL_TYPE_INTEGER, .name = "Color", .minimum = 0, - .maximum = 255, + .maximum = 64, .step = 1, -#define COLOR_DEF 127 +#define COLOR_DEF 32 .default_value = COLOR_DEF, }, .set = sd_setcolors, @@ -1132,17 +1132,18 @@ static void setcontrast(struct gspca_dev *gspca_dev) static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 data; - int colour; + __u8 blue, red; - colour = sd->colors - 128; - if (colour > 0) { - data = (colour + 32) & 0x7f; /* blue */ - reg_w1(gspca_dev, 0x06, data); + if (sd->colors >= 32) { + red = 32 + (sd->colors - 32) / 2; + blue = 64 - sd->colors; } else { - data = (-colour + 32) & 0x7f; /* red */ - reg_w1(gspca_dev, 0x05, data); + red = sd->colors; + blue = 32 + (32 - sd->colors) / 2; } + reg_w1(gspca_dev, 0x05, red); +/* reg_w1(gspca_dev, 0x07, 32); */ + reg_w1(gspca_dev, 0x06, blue); } static void setautogain(struct gspca_dev *gspca_dev) From 4f30f6cf6b1baf2d19f6b575c4486ae6dc0c2a00 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:05 -0300 Subject: [PATCH 413/638] V4L/DVB (8714): gspca: Bad start of sn9c110 and sensor om6802. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 19c9791309e..7860061f3de 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -793,7 +793,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev, switch (sd->sensor) { case SENSOR_OM6802: - reg_w1(gspca_dev, 0x02, 0x73); /* was 71 */ + reg_w1(gspca_dev, 0x02, 0x71); reg_w1(gspca_dev, 0x01, 0x42); reg_w1(gspca_dev, 0x17, 0x64); reg_w1(gspca_dev, 0x01, 0x42); From 142346bf9f2410b32cd219cf3f70a85ac56d5b85 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:07 -0300 Subject: [PATCH 414/638] V4L/DVB (8715): gspca: Change the name of some webcam in the gspca doc. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index c7fc9fa8bec..2dd2f774dd8 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -88,14 +88,14 @@ zc3xx 0471:0325 Philips SPC 200 NC zc3xx 0471:0326 Philips SPC 300 NC sonixj 0471:0327 Philips SPC 600 NC sonixj 0471:0328 Philips SPC 700 NC -zc3xx 0471:032d Philips spc210nc -zc3xx 0471:032e Philips spc315nc -sonixj 0471:0330 Philips SPC 710NC +zc3xx 0471:032d Philips SPC 210 NC +zc3xx 0471:032e Philips SPC 315 NC +sonixj 0471:0330 Philips SPC 710 NC spca501 0497:c001 Smile International sunplus 04a5:3003 Benq DC 1300 sunplus 04a5:3008 Benq DC 1500 -sunplus 04a5:300a Benq DC3410 -spca500 04a5:300c Benq DC1016 +sunplus 04a5:300a Benq DC 3410 +spca500 04a5:300c Benq DC 1016 sunplus 04f1:1001 JVC GC A50 spca561 04fc:0561 Flexcam 100 sunplus 04fc:500c Sunplus CA500C @@ -175,18 +175,18 @@ sunplus 08ca:2060 Aiptek PocketDV5300 tv8532 0923:010f ICM532 cams mars 093a:050f Mars-Semi Pc-Camera pac207 093a:2460 PAC207 Qtec Webcam 100 -pac207 093a:2463 Philips spc200nc pac207 +pac207 093a:2463 Philips SPC 220 NC pac207 093a:2464 Labtec Webcam 1200 pac207 093a:2468 PAC207 pac207 093a:2470 Genius GF112 -pac207 093a:2471 PAC207 Genius VideoCam ge111 -pac207 093a:2472 PAC207 Genius VideoCam ge110 +pac207 093a:2471 Genius VideoCam ge111 +pac207 093a:2472 Genius VideoCam ge110 pac7311 093a:2600 PAC7311 Typhoon -pac7311 093a:2601 PAC7311 Phillips SPC610NC +pac7311 093a:2601 Philips SPC 610 NC pac7311 093a:2603 PAC7312 -pac7311 093a:2608 PAC7311 Trust WB-3300p -pac7311 093a:260e PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 -pac7311 093a:260f PAC7311 SnakeCam +pac7311 093a:2608 Trust WB-3300p +pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 +pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 @@ -235,7 +235,7 @@ zc3xx 10fd:0128 Typhoon Webshot II USB 300k 0x0128 spca561 10fd:7e50 FlyCam Usb 100 zc3xx 10fd:8050 Typhoon Webshot II USB 300k spca501 1776:501c Arowana 300K CMOS Camera -t613 17a1:0128 T613/TAS5130A +t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC pac207 2001:f115 D-Link DSB-C120 spca500 2899:012c Toptro Industrial From 5b064da80831500a6ac6ea501d2d0cb5e8323cc7 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:08 -0300 Subject: [PATCH 415/638] V4L/DVB (8716): gspca: Bad start of sn9c110 and sensor ov7630. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 7860061f3de..e0ba50c96f3 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1248,7 +1248,7 @@ static void sd_start(struct gspca_dev *gspca_dev) case SENSOR_OV7630: ov7630_InitSensor(gspca_dev); reg17 = 0xe2; - reg1 = 0x40; + reg1 = 0x44; break; case SENSOR_OV7648: ov7648_InitSensor(gspca_dev); From 5d05294ac8f6b5d592ee3379fbddd0fb9d1b4c87 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:09 -0300 Subject: [PATCH 416/638] V4L/DVB (8717): gspca: Frame buffer too small for small resolutions (sonixj and t613). Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 2 +- drivers/media/video/gspca/t613.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index e0ba50c96f3..11a29a96960 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -135,7 +135,7 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 160 * 120 * 3 / 8 + 590, + .sizeimage = 160 * 120 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 2}, {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 91b555c34c6..fd6918eefbb 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -233,7 +233,7 @@ static char *effects_control[] = { static struct v4l2_pix_format vga_mode_t16[] = { {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 160 * 120 * 3 / 8 + 590, + .sizeimage = 160 * 120 * 4 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 4}, {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, From 6a709749228c5f76f128c69c16f39a52d639bd96 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:10 -0300 Subject: [PATCH 417/638] V4L/DVB (8718): gspca: suspend/resume added. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 4 ++++ drivers/media/video/gspca/etoms.c | 4 ++++ drivers/media/video/gspca/gspca.c | 30 ++++++++++++++++++++++++++++- drivers/media/video/gspca/gspca.h | 7 +++++++ drivers/media/video/gspca/mars.c | 4 ++++ drivers/media/video/gspca/ov519.c | 4 ++++ drivers/media/video/gspca/pac207.c | 4 ++++ drivers/media/video/gspca/pac7311.c | 4 ++++ drivers/media/video/gspca/sonixb.c | 4 ++++ drivers/media/video/gspca/sonixj.c | 4 ++++ drivers/media/video/gspca/spca500.c | 4 ++++ drivers/media/video/gspca/spca501.c | 4 ++++ drivers/media/video/gspca/spca505.c | 4 ++++ drivers/media/video/gspca/spca506.c | 4 ++++ drivers/media/video/gspca/spca508.c | 4 ++++ drivers/media/video/gspca/spca561.c | 4 ++++ drivers/media/video/gspca/stk014.c | 4 ++++ drivers/media/video/gspca/sunplus.c | 4 ++++ drivers/media/video/gspca/t613.c | 4 ++++ drivers/media/video/gspca/tv8532.c | 4 ++++ drivers/media/video/gspca/vc032x.c | 4 ++++ drivers/media/video/gspca/zc3xx.c | 4 ++++ 22 files changed, 116 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index cd3a3f5829b..739ef557c43 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -1026,6 +1026,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index ca23c3f9aaa..a3cccab7b81 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -926,6 +926,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 15d302b28b7..2f7bf263255 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -114,7 +114,8 @@ static void fill_frame(struct gspca_dev *gspca_dev, cam_pkt_op pkt_scan; if (urb->status != 0) { - PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status); + if (!gspca_dev->frozen) + PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status); return; /* disconnection ? */ } pkt_scan = gspca_dev->sd_desc->pkt_scan; @@ -1808,6 +1809,33 @@ void gspca_disconnect(struct usb_interface *intf) } EXPORT_SYMBOL(gspca_disconnect); +#ifdef CONFIG_PM +int gspca_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + + if (!gspca_dev->streaming) + return 0; + gspca_dev->frozen = 1; /* avoid urb error messages */ + gspca_dev->sd_desc->stopN(gspca_dev); + destroy_urbs(gspca_dev); + gspca_set_alt0(gspca_dev); + gspca_dev->sd_desc->stop0(gspca_dev); + return 0; +} +EXPORT_SYMBOL(gspca_suspend); + +int gspca_resume(struct usb_interface *intf) +{ + struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + + gspca_dev->frozen = 0; + if (!gspca_dev->streaming) + return 0; + return gspca_init_transfer(gspca_dev); +} +EXPORT_SYMBOL(gspca_resume); +#endif /* -- cam driver utility functions -- */ /* auto gain and exposure algorithm based on the knee algorithm described here: diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 5cb584546ee..2596568e82f 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -154,6 +154,9 @@ struct gspca_dev { struct mutex queue_lock; /* ISOC queue protection */ __u32 sequence; /* frame sequence number */ char streaming; +#ifdef CONFIG_PM + char frozen; /* suspend - resume */ +#endif char users; /* number of opens */ char present; /* device connected */ char nbufread; /* number of buffers for read() */ @@ -173,6 +176,10 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev, struct gspca_frame *frame, const __u8 *data, int len); +#ifdef CONFIG_PM +int gspca_suspend(struct usb_interface *intf, pm_message_t message); +int gspca_resume(struct usb_interface *intf); +#endif int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum, int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee); #endif /* GSPCAV2_H */ diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 21c4ee56a10..d7e20957818 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -439,6 +439,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index b4f00ec0885..c132f8d2cf0 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2132,6 +2132,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index cee45b0486c..d9668f4cb4d 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -596,6 +596,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e4f56e0d3ff..4cc9379ee41 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -936,6 +936,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 11210c71f66..e535ced79f1 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1231,6 +1231,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 11a29a96960..0d4677688c9 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1617,6 +1617,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 17fe2c2a440..5a20385fb17 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -1093,6 +1093,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index 51a3c3429ef..525f1b3400e 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2154,6 +2154,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index eda29d60935..8f00558c2f5 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -855,6 +855,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index f622fa75766..ae772488cf7 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -772,6 +772,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 699340c17de..7b38c4e70fd 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1667,6 +1667,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index ec575f5672d..b6a013f1dec 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1184,6 +1184,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 16219cf6a6d..387a8cf2b3b 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -564,6 +564,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 54efa48bee0..c935384fc23 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -1456,6 +1456,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index fd6918eefbb..357a2edad21 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -1014,6 +1014,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index 1ff8ba2f7fe..d2273624a91 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -644,6 +644,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index f4a52956e0d..47c7ce641d9 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1774,6 +1774,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; /* -- module insert / remove -- */ diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d36f4d7d22b..79436f27cd4 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7584,6 +7584,10 @@ static struct usb_driver sd_driver = { .id_table = device_table, .probe = sd_probe, .disconnect = gspca_disconnect, +#ifdef CONFIG_PM + .suspend = gspca_suspend, + .resume = gspca_resume, +#endif }; static int __init sd_mod_init(void) From f9b4a377dc6601a3299171c7b24c2c5189c0c10b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 16:48:14 -0300 Subject: [PATCH 418/638] V4L/DVB (8719): gspca: Have VIDIOC_QUERYCTRL more compliant to the spec. - return -EINVAL when control not supported. - start the private controls at V4L2_CID_PRIVATE_BASE. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 5 ----- drivers/media/video/gspca/t613.c | 2 +- 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 2f7bf263255..061e1912924 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -884,11 +884,6 @@ static int vidioc_queryctrl(struct file *file, void *priv, return 0; } } - if (id >= V4L2_CID_BASE - && id <= V4L2_CID_LASTP1) { - q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED; - return 0; - } return -EINVAL; } diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 357a2edad21..962c1df5829 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -30,7 +30,7 @@ #define MAX_GAMMA 0x10 /* 0 to 15 */ -#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3) +#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0) MODULE_AUTHOR("Leandro Costantino "); MODULE_DESCRIPTION("GSPCA/T613 (JPEG Compliance) USB Camera Driver"); From 89a44b8a690ff2d8639b72931d9c197a8db0c803 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 16:48:16 -0300 Subject: [PATCH 419/638] V4L/DVB (8720): gspca: V4L2_CAP_SENSOR_UPSIDE_DOWN added as a cap for some webcams. This patch adds a V4L2_CAP_SENSOR_UPSIDE_DOWN flag to the capabilities flags, and sets this flag for the Philips SPC200NC cam (which has its sensor installed upside down). The same flag is also needed and added for the Philips SPC300NC. Together with a patch to libv4l which adds flipping the image in software this fixes the upside down display with the SPC200NC cam. Signed-of-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ drivers/media/video/gspca/gspca.h | 4 ++++ drivers/media/video/gspca/zc3xx.c | 31 +++++++++++++++++++------------ include/linux/videodev2.h | 5 +++++ 4 files changed, 30 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 061e1912924..3461bc9e473 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -851,6 +851,8 @@ static int vidioc_querycap(struct file *file, void *priv, cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; + if (gspca_dev->flags & GSPCA_SENSOR_UPSIDE_DOWN_FLAG) + cap->capabilities |= V4L2_CAP_SENSOR_UPSIDE_DOWN; return 0; } diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 2596568e82f..1920c99d6f4 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -118,6 +118,9 @@ struct gspca_frame { struct v4l2_buffer v4l2_buf; }; +/* defines for the flags member */ +#define GSPCA_SENSOR_UPSIDE_DOWN_FLAG 0x01 + struct gspca_dev { struct video_device vdev; /* !! must be the first item */ struct file_operations fops; @@ -163,6 +166,7 @@ struct gspca_dev { char nurbs; /* number of allocated URBs */ char memory; /* memory type (V4L2_MEMORY_xxx) */ __u8 nbalt; /* number of USB alternate settings */ + __u8 flags; /* see GSPCA_XXX_FLAG defines */ }; int gspca_dev_probe(struct usb_interface *intf, diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 79436f27cd4..f1d8c7a08ba 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -70,6 +70,10 @@ struct sd { unsigned short chip_revision; }; +#define DRIVER_INFO(sensor, flags) .driver_info = ((sensor) << 8) | (flags) +#define DRIVER_INFO_GET_SENSOR(driver_info) ((driver_info) >> 8) +#define DRIVER_INFO_GET_FLAGS(driver_info) ((driver_info) & 0xff) + /* V4L2 controls supported by the driver */ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); @@ -7015,7 +7019,8 @@ static int sd_config(struct gspca_dev *gspca_dev, /* define some sensors from the vendor/product */ sd->sharpness = 2; - sd->sensor = id->driver_info; + sd->sensor = DRIVER_INFO_GET_SENSOR(id->driver_info); + gspca_dev->flags = DRIVER_INFO_GET_FLAGS(id->driver_info); sensor = zcxx_probeSensor(gspca_dev); if (sensor >= 0) PDEBUG(D_PROBE, "probe sensor -> %02x", sensor); @@ -7505,19 +7510,19 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x041e, 0x4017)}, - {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x041e, 0x401c), DRIVER_INFO(SENSOR_PAS106, 0)}, {USB_DEVICE(0x041e, 0x401e)}, {USB_DEVICE(0x041e, 0x401f)}, #endif {USB_DEVICE(0x041e, 0x4029)}, #ifndef CONFIG_USB_ZC0301 - {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106}, - {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x041e, 0x4034), DRIVER_INFO(SENSOR_PAS106, 0)}, + {USB_DEVICE(0x041e, 0x4035), DRIVER_INFO(SENSOR_PAS106, 0)}, {USB_DEVICE(0x041e, 0x4036)}, {USB_DEVICE(0x041e, 0x403a)}, #endif - {USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250}, - {USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250}, + {USB_DEVICE(0x041e, 0x4051), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, + {USB_DEVICE(0x041e, 0x4053), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0458, 0x7007)}, {USB_DEVICE(0x0458, 0x700c)}, @@ -7543,11 +7548,13 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x08d9)}, {USB_DEVICE(0x046d, 0x08d8)}, {USB_DEVICE(0x046d, 0x08da)}, - {USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB}, - {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106}, - {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106}, - {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106}, - {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x046d, 0x08dd), DRIVER_INFO(SENSOR_MC501CB, 0)}, + {USB_DEVICE(0x0471, 0x0325), DRIVER_INFO(SENSOR_PAS106, + GSPCA_SENSOR_UPSIDE_DOWN_FLAG)}, + {USB_DEVICE(0x0471, 0x0326), DRIVER_INFO(SENSOR_PAS106, + GSPCA_SENSOR_UPSIDE_DOWN_FLAG)}, + {USB_DEVICE(0x0471, 0x032d), DRIVER_INFO(SENSOR_PAS106, 0)}, + {USB_DEVICE(0x0471, 0x032e), DRIVER_INFO(SENSOR_PAS106, 0)}, {USB_DEVICE(0x055f, 0xc005)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x055f, 0xd003)}, @@ -7559,7 +7566,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0ac8, 0x301b)}, {USB_DEVICE(0x0ac8, 0x303b)}, #endif - {USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250}, + {USB_DEVICE(0x0ac8, 0x305b), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0ac8, 0x307b)}, {USB_DEVICE(0x10fd, 0x0128)}, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 6c73516b74c..4c30655b293 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -261,6 +261,11 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ +/* This flags gets set if the "sensor" is known to be upside down and this can + *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag + is not a guarantee for the image not being upside down. */ +#define V4L2_CAP_SENSOR_UPSIDE_DOWN 0x10000000 + /* * V I D E O I M A G E F O R M A T */ From 09a29b771535e0b8cef66946fdaeb43b0e545570 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 16:48:17 -0300 Subject: [PATCH 420/638] V4L/DVB (8722): sms1xxx: fix typo in license header This should have read, "GNU General Public License version 2" rather than, "GNU General Public License version 3" This was actually a typo mass-blunder -- this is not a change in licence, as the code was always GPLv2. Signed-off-by: Uri Shkolnik Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 2 +- drivers/media/dvb/siano/sms-cards.h | 2 +- drivers/media/dvb/siano/smscoreapi.c | 2 +- drivers/media/dvb/siano/smscoreapi.h | 2 +- drivers/media/dvb/siano/smsdvb.c | 2 +- drivers/media/dvb/siano/smsusb.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index e7a8ac0c404..cc5efb643f3 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -4,7 +4,7 @@ * Copyright (c) 2008 Michael Krufky * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h index 83b39bc203f..c8f3da6f9bc 100644 --- a/drivers/media/dvb/siano/sms-cards.h +++ b/drivers/media/dvb/siano/sms-cards.h @@ -4,7 +4,7 @@ * Copyright (c) 2008 Michael Krufky * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index c5f45fed69d..6576fbb40fc 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -8,7 +8,7 @@ * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h index c1f8f1dccb1..8d973f726fb 100644 --- a/drivers/media/dvb/siano/smscoreapi.h +++ b/drivers/media/dvb/siano/smscoreapi.h @@ -6,7 +6,7 @@ * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c index 229274a1411..8d490e133f3 100644 --- a/drivers/media/dvb/siano/smsdvb.c +++ b/drivers/media/dvb/siano/smsdvb.c @@ -6,7 +6,7 @@ * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index c10b1849c6a..87a3c24454b 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -6,7 +6,7 @@ * Copyright (c), 2005-2008 Siano Mobile Silicon, Inc. * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 3 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation; * * Software distributed under the License is distributed on an "AS IS" From f46466e7d6ff4871e5faae32d277175293a34c1f Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Wed, 3 Sep 2008 16:48:20 -0300 Subject: [PATCH 421/638] V4L/DVB (8726): link tuner before saa7134 If saa7134_init is run before v4l2_i2c_drv_init (tuner), then saa7134_board_init2 will try to set the tuner type for devices that don't exist yet. This moves tuner to before all of the device-specific drivers so that it's loaded early enough on boot. Signed-off-by: Simon Arlott Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index bbc6f8b8229..ef7c8d3ffb1 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -20,6 +20,8 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y) obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o endif +obj-$(CONFIG_VIDEO_TUNER) += tuner.o + obj-$(CONFIG_VIDEO_BT848) += bt8xx/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o @@ -85,8 +87,6 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o obj-$(CONFIG_VIDEO_DPC) += dpc7146.o obj-$(CONFIG_TUNER_3036) += tuner-3036.o -obj-$(CONFIG_VIDEO_TUNER) += tuner.o - obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o From b54ff9398ac7d38a129167b580383943592b6f08 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Wed, 3 Sep 2008 16:48:21 -0300 Subject: [PATCH 422/638] V4L/DVB (8727): V4L1: make PMS not autoprobe when builtin. The old Mediavision Pro Movie Studio legacy ISA V4L1 driver was found to hang the boot during Ingo Molnar's testing of randconfig kernels. Have it require a "pms.enable=1" kernel parameter to enable the driver when builtin which avoids such problems. This is a deprecated and, very likely, unused driver. Nothing changes modular behaviour moreover. Signed-off-by: Rene Herman Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pms.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index 00425d74365..ede522a33d7 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -1019,10 +1019,22 @@ static int init_mediavision(void) * Initialization and module stuff */ +#ifndef MODULE +static int enable; +module_param(enable, int, 0); +#endif + static int __init init_pms_cards(void) { printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n"); +#ifndef MODULE + if (!enable) { + printk(KERN_INFO "Not enabled\n"); + return -ENODEV; + } +#endif + data_port = io_port +1; if(init_mediavision()) From 4ce0b659689a97bc356e96aeac813cad2d137339 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Wed, 3 Sep 2008 16:48:23 -0300 Subject: [PATCH 423/638] V4L/DVB (8728): 1-make-pms-not-autoprobe-when-builtin update On 10-08-08 23:37, Alan Cox wrote: > > Would probably make the printk "pms: not enabled, use pms.enable=1 to > probe" > > So you know > a) What is wittering about not being probed > b) How to undo it. > > But thats trivia really. Signed-off-by: Rene Herman Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c index ede522a33d7..7c84f795db5 100644 --- a/drivers/media/video/pms.c +++ b/drivers/media/video/pms.c @@ -1030,7 +1030,8 @@ static int __init init_pms_cards(void) #ifndef MODULE if (!enable) { - printk(KERN_INFO "Not enabled\n"); + printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to " + "probe\n"); return -ENODEV; } #endif From 5b5aff83a549c8f1e425e06d46ec951eae950b37 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 3 Sep 2008 17:11:52 -0300 Subject: [PATCH 424/638] V4L/DVB (8749): Fix error code, when camera is not turned on by sonypi Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/meye.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c index 7c8ef6ac6c3..a9ef7802eb5 100644 --- a/drivers/media/video/meye.c +++ b/drivers/media/video/meye.c @@ -1806,6 +1806,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev, memcpy(meye.video_dev, &meye_template, sizeof(meye_template)); meye.video_dev->parent = &meye.mchip_dev->dev; + ret = -EIO; if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) { printk(KERN_ERR "meye: unable to power on the camera\n"); printk(KERN_ERR "meye: did you enable the camera in " @@ -1813,7 +1814,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev, goto outsonypienable; } - ret = -EIO; if ((ret = pci_enable_device(meye.mchip_dev))) { printk(KERN_ERR "meye: pci_enable_device failed\n"); goto outenabledev; From f3b9f50ef771670b5d94c568241d6766691c6c18 Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Wed, 3 Sep 2008 17:11:53 -0300 Subject: [PATCH 425/638] V4L/DVB (8750): V4L: check inval in video_register_device_index() Better check the video_device pointer before using it. Signed-off-by: Henrik Kretzschmar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 0320fb84119..155fdec9ac7 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -257,6 +257,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr, int ret; char *name_base; + if (vfd == NULL) + return -EINVAL; + switch (type) { case VFL_TYPE_GRABBER: base = MINOR_VFL_TYPE_GRABBER_MIN; From 980d4f17345fe420fda2a84cd4a28d5d41d73cef Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 3 Sep 2008 17:11:53 -0300 Subject: [PATCH 426/638] V4L/DVB (8751): vivi: Fix some issues at vivi register routine This patch fixes several small issues at vivi register routines: 1) minor and n_devs should be unsigned; 2) n_devs = 0 were not properly handled; 3) if n_devs specify a high number, the driver would just roll back and won't register any device. The proper behaviour is to keep all succeded devices registered; 4) both n_devs and minor were using 0 as permissions. Better to have them with 0444. With the current patch, if n_devs specify a very large value, it will register all possible devices. For example, on a machine without any other V4L drivers loaded, with this patch, we will have something like: vivi: V4L2 device registered as /dev/video0 vivi: V4L2 device registered as /dev/video1 vivi: V4L2 device registered as /dev/video2 ... vivi: V4L2 device registered as /dev/video31 video_register_device_index: get_index failed Video Technology Magazine Virtual Video Capture Board ver 0.5.0 successfully loaded. 5) The number of allocated devices on success is now kept at n_devs: $ cat /sys/module/vivi/parameters/n_devs 32 Thanks to Henne for pointing that there were some issues at vivi. Cc: Henne Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 44 +++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 3518af071a2..f55d77db155 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1104,19 +1104,29 @@ static struct video_device vivi_template = { Initialization and module stuff ------------------------------------------------------------------*/ +/* This routine allocates from 1 to n_devs virtual drivers. + + The real maximum number of virtual drivers will depend on how many drivers + will succeed. This is limited to the maximum number of devices that + videodev supports. Since there are 64 minors for video grabbers, this is + currently the theoretical maximum limit. However, a further limit does + exist at videodev that forbids any driver to register more than 32 video + grabbers. + */ static int __init vivi_init(void) { int ret = -ENOMEM, i; struct vivi_dev *dev; struct video_device *vfd; + if (n_devs <= 0) + n_devs = 1; + for (i = 0; i < n_devs; i++) { dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (NULL == dev) + if (!dev) break; - list_add_tail(&dev->vivi_devlist, &vivi_devlist); - /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); init_waitqueue_head(&dev->vidq.wq); @@ -1126,14 +1136,27 @@ static int __init vivi_init(void) mutex_init(&dev->mutex); vfd = video_device_alloc(); - if (NULL == vfd) + if (!vfd) { + kfree(dev); break; + } *vfd = vivi_template; ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); - if (ret < 0) + if (ret < 0) { + video_device_release(vfd); + kfree(dev); + + /* If some registers succeeded, keep driver */ + if (i) + ret = 0; + break; + } + + /* Now that everything is fine, let's add it to device list */ + list_add_tail(&dev->vivi_devlist, &vivi_devlist); snprintf(vfd->name, sizeof(vfd->name), "%s (%i)", vivi_template.name, vfd->minor); @@ -1149,11 +1172,16 @@ static int __init vivi_init(void) if (ret < 0) { vivi_release(); printk(KERN_INFO "Error %d while loading vivi driver\n", ret); - } else + } else { printk(KERN_INFO "Video Technology Magazine Virtual Video " "Capture Board ver %u.%u.%u successfully loaded.\n", (VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF, VIVI_VERSION & 0xFF); + + /* n_devs will reflect the actual number of allocated devices */ + n_devs = i; + } + return ret; } @@ -1169,10 +1197,10 @@ MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board"); MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); MODULE_LICENSE("Dual BSD/GPL"); -module_param(video_nr, int, 0); +module_param(video_nr, uint, 0444); MODULE_PARM_DESC(video_nr, "video iminor start number"); -module_param(n_devs, int, 0); +module_param(n_devs, uint, 0444); MODULE_PARM_DESC(n_devs, "number of video devices to create"); module_param_named(debug, vivi_template.debug, int, 0444); From c6eb8eafdba4ad18b4520a0d28a38bc9e61883ea Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 17:11:54 -0300 Subject: [PATCH 427/638] V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 4 +- drivers/media/common/tuners/tuner-simple.c | 33 +++++----- drivers/media/dvb/dvb-core/dmxdev.c | 1 - drivers/media/dvb/dvb-core/dvb_ca_en50221.c | 4 +- drivers/media/dvb/dvb-core/dvb_frontend.c | 8 +-- drivers/media/dvb/dvb-usb/cxusb.c | 2 +- drivers/media/radio/radio-maxiradio.c | 26 ++++---- drivers/media/video/bt8xx/bttv-cards.c | 70 ++++++++++++--------- drivers/media/video/bt8xx/bttv-driver.c | 1 - drivers/media/video/bt8xx/bttv-risc.c | 3 +- drivers/media/video/bt8xx/bttvp.h | 5 ++ drivers/media/video/btcx-risc.c | 4 +- drivers/media/video/btcx-risc.h | 2 +- drivers/media/video/cpia2/cpia2_v4l.c | 1 - drivers/media/video/cx18/cx18-av-firmware.c | 16 ++--- drivers/media/video/cx18/cx18-driver.c | 6 +- drivers/media/video/cx18/cx18-queue.c | 8 +-- drivers/media/video/gspca/gspca.c | 2 +- drivers/media/video/ks0127.c | 31 ++++----- drivers/media/video/mxb.c | 12 ++-- drivers/media/video/ov511.c | 14 ++--- drivers/media/video/pwc/pwc-ctrl.c | 16 ++--- drivers/media/video/usbvideo/ibmcam.c | 6 +- 23 files changed, 145 insertions(+), 130 deletions(-) diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index e8bc7abf240..99be9e5c85f 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1068,7 +1068,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int { v4l2_std_id *id = arg; int found = 0; - int i, err; + int i; DEB_EE(("VIDIOC_S_STD\n")); @@ -1116,7 +1116,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int case VIDIOC_OVERLAY: { int on = *(int *)arg; - int err = 0; DEB_D(("VIDIOC_OVERLAY on:%d\n",on)); if (on != 0) { @@ -1192,7 +1191,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; - struct videobuf_queue *q; int i; /* fixme: number of capture buffers and sizes for v4l apps */ diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index 597e47f5d69..aa773a658a2 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -253,7 +253,7 @@ static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe, static int simple_config_lookup(struct dvb_frontend *fe, struct tuner_params *t_params, - int *frequency, u8 *config, u8 *cb) + unsigned *frequency, u8 *config, u8 *cb) { struct tuner_simple_priv *priv = fe->tuner_priv; int i; @@ -587,45 +587,45 @@ static int simple_set_tv_freq(struct dvb_frontend *fe, priv->last_div = div; if (t_params->has_tda9887) { struct v4l2_priv_tun_config tda9887_cfg; - int config = 0; + int tda_config = 0; int is_secam_l = (params->std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) && !(params->std & ~(V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)); tda9887_cfg.tuner = TUNER_TDA9887; - tda9887_cfg.priv = &config; + tda9887_cfg.priv = &tda_config; if (params->std == V4L2_STD_SECAM_LC) { if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc) - config |= TDA9887_PORT1_ACTIVE; + tda_config |= TDA9887_PORT1_ACTIVE; if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc) - config |= TDA9887_PORT2_ACTIVE; + tda_config |= TDA9887_PORT2_ACTIVE; } else { if (t_params->port1_active) - config |= TDA9887_PORT1_ACTIVE; + tda_config |= TDA9887_PORT1_ACTIVE; if (t_params->port2_active) - config |= TDA9887_PORT2_ACTIVE; + tda_config |= TDA9887_PORT2_ACTIVE; } if (t_params->intercarrier_mode) - config |= TDA9887_INTERCARRIER; + tda_config |= TDA9887_INTERCARRIER; if (is_secam_l) { if (i == 0 && t_params->default_top_secam_low) - config |= TDA9887_TOP(t_params->default_top_secam_low); + tda_config |= TDA9887_TOP(t_params->default_top_secam_low); else if (i == 1 && t_params->default_top_secam_mid) - config |= TDA9887_TOP(t_params->default_top_secam_mid); + tda_config |= TDA9887_TOP(t_params->default_top_secam_mid); else if (t_params->default_top_secam_high) - config |= TDA9887_TOP(t_params->default_top_secam_high); + tda_config |= TDA9887_TOP(t_params->default_top_secam_high); } else { if (i == 0 && t_params->default_top_low) - config |= TDA9887_TOP(t_params->default_top_low); + tda_config |= TDA9887_TOP(t_params->default_top_low); else if (i == 1 && t_params->default_top_mid) - config |= TDA9887_TOP(t_params->default_top_mid); + tda_config |= TDA9887_TOP(t_params->default_top_mid); else if (t_params->default_top_high) - config |= TDA9887_TOP(t_params->default_top_high); + tda_config |= TDA9887_TOP(t_params->default_top_high); } if (t_params->default_pll_gating_18) - config |= TDA9887_GATING_18; + tda_config |= TDA9887_GATING_18; i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, &tda9887_cfg); } @@ -813,7 +813,8 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf, static struct tuner_params *t_params; u8 config, cb; u32 div; - int ret, frequency = params->frequency / 62500; + int ret; + unsigned frequency = params->frequency / 62500; t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL); ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb); diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 1cf9fcb6f51..069d847ba88 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -641,7 +641,6 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) struct timespec timeout = { 0 }; struct dmx_pes_filter_params *para = &filter->params.pes; dmx_output_t otype; - int ret; int ts_type; enum dmx_ts_pes ts_pes; struct dmx_ts_feed **tsfeed = &filter->feed.ts; diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index 8e5dd7b1f03..98ee16773ff 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -1032,7 +1032,7 @@ static int dvb_ca_en50221_thread(void *data) /* we need this extra check for annoying interfaces like the budget-av */ if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && (ca->pub->poll_slot_status)) { - int status = ca->pub->poll_slot_status(ca->pub, slot, 0); + status = ca->pub->poll_slot_status(ca->pub, slot, 0); if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; dvb_ca_en50221_thread_update_delay(ca); @@ -1089,7 +1089,7 @@ static int dvb_ca_en50221_thread(void *data) /* we need this extra check for annoying interfaces like the budget-av */ if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && (ca->pub->poll_slot_status)) { - int status = ca->pub->poll_slot_status(ca->pub, slot, 0); + status = ca->pub->poll_slot_status(ca->pub, slot, 0); if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; dvb_ca_en50221_thread_update_delay(ca); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 8cbdb218952..3526e3ee948 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -889,13 +889,13 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, * initialization, so parg is 8 bits and does not * include the initialization or start bit */ - unsigned long cmd = ((unsigned long) parg) << 1; + unsigned long swcmd = ((unsigned long) parg) << 1; struct timeval nexttime; struct timeval tv[10]; int i; u8 last = 1; if (dvb_frontend_debug) - printk("%s switch command: 0x%04lx\n", __func__, cmd); + printk("%s switch command: 0x%04lx\n", __func__, swcmd); do_gettimeofday(&nexttime); if (dvb_frontend_debug) memcpy(&tv[0], &nexttime, sizeof(struct timeval)); @@ -908,12 +908,12 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, for (i = 0; i < 9; i++) { if (dvb_frontend_debug) do_gettimeofday(&tv[i + 1]); - if ((cmd & 0x01) != last) { + if ((swcmd & 0x01) != last) { /* set voltage to (last ? 13V : 18V) */ fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); last = (last) ? 0 : 1; } - cmd = cmd >> 1; + swcmd = swcmd >> 1; if (i != 8) dvb_frontend_sleep_until(&nexttime, 8000); } diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index aaa0b6f0b52..563400277a4 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -210,7 +210,7 @@ static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) if (d->state == DVB_USB_STATE_INIT && usb_set_interface(d->udev, 0, 0) < 0) err("set interface failed"); - do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && + do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); if (!ret) { diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 43c75497dc4..e210da16156 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -156,28 +156,28 @@ static void set_freq(__u16 io, __u32 freq) { unsigned long int si; int bl; - int data = FREQ2BITS(freq); + int val = FREQ2BITS(freq); /* TEA5757 shift register bits (see pdf) */ - outbit(0,io); // 24 search - outbit(1,io); // 23 search up/down + outbit(0, io); /* 24 search */ + outbit(1, io); /* 23 search up/down */ - outbit(0,io); // 22 stereo/mono + outbit(0, io); /* 22 stereo/mono */ - outbit(0,io); // 21 band - outbit(0,io); // 20 band (only 00=FM works I think) + outbit(0, io); /* 21 band */ + outbit(0, io); /* 20 band (only 00=FM works I think) */ - outbit(0,io); // 19 port ? - outbit(0,io); // 18 port ? + outbit(0, io); /* 19 port ? */ + outbit(0, io); /* 18 port ? */ - outbit(0,io); // 17 search level - outbit(0,io); // 16 search level + outbit(0, io); /* 17 search level */ + outbit(0, io); /* 16 search level */ si = 0x8000; - for (bl = 1; bl <= 16 ; bl++) { - outbit(data & si,io); - si >>=1; + for (bl = 1; bl <= 16; bl++) { + outbit(val & si, io); + si >>= 1; } dprintk(1, "Radio freq set to %d.%02d MHz\n", diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 1c56ae92ce7..9001de23332 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -3144,8 +3144,9 @@ static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) static void flyvideo_gpio(struct bttv *btv) { - int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821; - int tuner=UNSET,ttype; + int gpio, has_remote, has_radio, is_capture_only; + int is_lr90, has_tda9820_tda9821; + int tuner_type = UNSET, ttype; gpio_inout(0xffffff, 0); udelay(8); /* without this we would see the 0x1800 mask */ @@ -3163,20 +3164,26 @@ static void flyvideo_gpio(struct bttv *btv) * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered * Note: Some bits are Audio_Mask ! */ - ttype=(gpio&0x0f0000)>>16; - switch(ttype) { - case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */ + ttype = (gpio & 0x0f0000) >> 16; + switch (ttype) { + case 0x0: + tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ break; - case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */ + case 0x2: + tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ break; - case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ + case 0x4: + tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ break; - case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */ + case 0x6: + tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ break; - case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ + case 0xC: + tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ break; default: printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr); + break; } has_remote = gpio & 0x800000; @@ -3189,23 +3196,26 @@ static void flyvideo_gpio(struct bttv *btv) /* * gpio & 0x001000 output bit for audio routing */ - if(is_capture_only) - tuner = TUNER_ABSENT; /* No tuner present */ + if (is_capture_only) + tuner_type = TUNER_ABSENT; /* No tuner present */ printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", - btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio); + btv->c.nr, has_radio ? "yes" : "no ", + has_remote ? "yes" : "no ", tuner_type, gpio); printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", - btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ", - is_capture_only?"yes":"no "); + btv->c.nr, is_lr90 ? "yes" : "no ", + has_tda9820_tda9821 ? "yes" : "no ", + is_capture_only ? "yes" : "no "); - if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */ - btv->tuner_type = tuner; + if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ + btv->tuner_type = tuner_type; btv->has_radio = has_radio; /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ - if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio; + if (has_tda9820_tda9821) + btv->audio_mode_gpio = lt9415_audio; /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ } @@ -3962,7 +3972,7 @@ static int tuner_1_table[] = { static void __devinit avermedia_eeprom(struct bttv *btv) { - int tuner_make,tuner_tv_fm,tuner_format,tuner=0; + int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; tuner_make = (eeprom_data[0x41] & 0x7); tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; @@ -3970,24 +3980,24 @@ static void __devinit avermedia_eeprom(struct bttv *btv) btv->has_remote = (eeprom_data[0x42] & 0x01); if (tuner_make == 0 || tuner_make == 2) - if(tuner_format <=0x0a) - tuner = tuner_0_table[tuner_format]; + if (tuner_format <= 0x0a) + tuner_type = tuner_0_table[tuner_format]; if (tuner_make == 1) - if(tuner_format <=9) - tuner = tuner_1_table[tuner_format]; + if (tuner_format <= 9) + tuner_type = tuner_1_table[tuner_format]; if (tuner_make == 4) - if(tuner_format == 0x09) - tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ + if (tuner_format == 0x09) + tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", - btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]); - if(tuner) { - btv->tuner_type=tuner; - printk("%d",tuner); + btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); + if (tuner_type) { + btv->tuner_type = tuner_type; + printk(KERN_CONT "%d", tuner_type); } else - printk("Unknown type"); - printk(" radio:%s remote control:%s\n", + printk(KERN_CONT "Unknown type"); + printk(KERN_CONT " radio:%s remote control:%s\n", tuner_tv_fm ? "yes" : "no", btv->has_remote ? "yes" : "no"); } diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 85bf31ab878..6ae4cc860ef 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -96,7 +96,6 @@ static unsigned int irq_iswitch; static unsigned int uv_ratio = 50; static unsigned int full_luma_range; static unsigned int coring; -extern int no_overlay; /* API features (turn on/off stuff for testing) */ static unsigned int v4l2 = 1; diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index 649682aac1a..5b1b8e4c78b 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -244,7 +244,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, const struct bttv_format *fmt, struct bttv_overlay *ov, int skip_even, int skip_odd) { - int dwords,rc,line,maxy,start,end,skip,nskips; + int dwords, rc, line, maxy, start, end; + unsigned skip, nskips; struct btcx_skiplist *skips; __le32 *rp; u32 ri,ra; diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 08ef54a22c9..b4d940b2e44 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -266,6 +266,11 @@ extern struct bus_type bttv_sub_bus_type; int bttv_sub_add_device(struct bttv_core *core, char *name); int bttv_sub_del_devices(struct bttv_core *core); +/* ---------------------------------------------------------- */ +/* bttv-cards.c */ + +extern int no_overlay; + /* ---------------------------------------------------------- */ /* bttv-driver.c */ diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index f42701f82e7..3324ab38f58 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -184,12 +184,12 @@ btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips) } void -btcx_calc_skips(int line, int width, unsigned int *maxy, +btcx_calc_skips(int line, int width, int *maxy, struct btcx_skiplist *skips, unsigned int *nskips, const struct v4l2_clip *clips, unsigned int nclips) { unsigned int clip,skip; - int end,maxline; + int end, maxline; skip=0; maxline = 9999; diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h index 861bc811282..f8bc6e8e7b5 100644 --- a/drivers/media/video/btcx-risc.h +++ b/drivers/media/video/btcx-risc.h @@ -23,7 +23,7 @@ int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win, int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, unsigned int n, int mask); void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips); -void btcx_calc_skips(int line, int width, unsigned int *maxy, +void btcx_calc_skips(int line, int width, int *maxy, struct btcx_skiplist *skips, unsigned int *nskips, const struct v4l2_clip *clips, unsigned int nclips); diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 515c8b57a60..c8257060642 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -1024,7 +1024,6 @@ static int ioctl_queryctrl(void *arg,struct camera_data *cam) if(cam->params.pnp_id.device_type == DEVICE_STV_672 && cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){ // Maximum 15fps - int i; for(i=0; imaximum; ++i) { if(framerate_controls[i].value == CPIA2_VP_FRAMERATE_15) { diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c index 834b9248242..e996a4e3123 100644 --- a/drivers/media/video/cx18/cx18-av-firmware.c +++ b/drivers/media/video/cx18/cx18-av-firmware.c @@ -32,7 +32,7 @@ int cx18_av_loadfw(struct cx18 *cx) u32 v; const u8 *ptr; int i; - int retries = 0; + int retries1 = 0; if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) { CX18_ERR("unable to open firmware %s\n", FWFILE); @@ -41,7 +41,7 @@ int cx18_av_loadfw(struct cx18 *cx) /* The firmware load often has byte errors, so allow for several retries, both at byte level and at the firmware load level. */ - while (retries < 5) { + while (retries1 < 5) { cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000); cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); @@ -57,9 +57,9 @@ int cx18_av_loadfw(struct cx18 *cx) for (i = 0; i < size; i++) { u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16); u32 value = 0; - int retries; + int retries2; - for (retries = 0; retries < 5; retries++) { + for (retries2 = 0; retries2 < 5; retries2++) { cx18_av_write4(cx, CXADEC_DL_CTL, dl_control); udelay(10); value = cx18_av_read4(cx, CXADEC_DL_CTL); @@ -69,18 +69,18 @@ int cx18_av_loadfw(struct cx18 *cx) the address. We can only write the lower address byte of the address. */ if ((value & 0x3F00) != (dl_control & 0x3F00)) { - retries = 5; + retries2 = 5; break; } } - if (retries >= 5) + if (retries2 >= 5) break; } if (i == size) break; - retries++; + retries1++; } - if (retries >= 5) { + if (retries1 >= 5) { CX18_ERR("unable to load firmware %s\n", FWFILE); release_firmware(fw); return -EIO; diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 22434aadde3..bd18afebbf8 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -74,9 +74,9 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }; -static int cardtype_c = 1; -static int tuner_c = 1; -static int radio_c = 1; +static unsigned cardtype_c = 1; +static unsigned tuner_c = 1; +static unsigned radio_c = 1; static char pal[] = "--"; static char secam[] = "--"; static char ntsc[] = "-"; diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index 8a4dd821fd9..a31da49f912 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -217,10 +217,10 @@ int cx18_stream_alloc(struct cx18_stream *s) s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024); - if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] - - (char *)cx->scb) > SCB_RESERVED_SIZE) { - unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE - - ((char *)cx->scb->cpu_mdl)); + if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] - + (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) { + unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE - + ((char __iomem *)cx->scb->cpu_mdl)); CX18_ERR("Too many buffers, cannot fit in SCB area\n"); CX18_ERR("Max buffers = %zd\n", diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3461bc9e473..0b292ca0c08 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1401,7 +1401,7 @@ static int vidioc_dqbuf(struct file *file, void *priv, i = ret; /* frame index */ frame = &gspca_dev->frame[i]; if (gspca_dev->memory == V4L2_MEMORY_USERPTR) { - if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr, + if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr, frame->data, frame->v4l2_buf.bytesused)) { PDEBUG(D_ERR|D_STREAM, diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c index 4895540be19..2fd4b4a44aa 100644 --- a/drivers/media/video/ks0127.c +++ b/drivers/media/video/ks0127.c @@ -679,26 +679,27 @@ static int ks0127_command(struct i2c_client *client, case DECODER_ENABLE_OUTPUT: { + int enable; - int *iarg = arg; - int enable = (*iarg != 0); - if (enable) { - dprintk("ks0127: command " + iarg = arg; + enable = (*iarg != 0); + if (enable) { + dprintk("ks0127: command " "DECODER_ENABLE_OUTPUT on " "(%d)\n", enable); - /* All output pins on */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); - /* Obey the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); - } else { - dprintk("ks0127: command " + /* All output pins on */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30); + /* Obey the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00); + } else { + dprintk("ks0127: command " "DECODER_ENABLE_OUTPUT off " "(%d)\n", enable); - /* Video output pins off */ - ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); - /* Ignore the OEN pin */ - ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); - } + /* Video output pins off */ + ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00); + /* Ignore the OEN pin */ + ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80); + } } break; diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index f68e91fbe7f..8ef578caba3 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -931,27 +931,29 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) return 0; } -static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) +static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard) { - struct mxb* mxb = (struct mxb*)dev->ext_priv; + struct mxb *mxb = (struct mxb *)dev->ext_priv; int zero = 0; int one = 1; - if(V4L2_STD_PAL_I == std->id ) { + if (V4L2_STD_PAL_I == standard->id) { v4l2_std_id std = V4L2_STD_PAL_I; + DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n")); /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* unset the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero); + mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } else { v4l2_std_id std = V4L2_STD_PAL_BG; + DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n")); /* set the 7146 gpio register -- I don't know what this does exactly */ saa7146_write(dev, GPIO_CTRL, 0x00404050); /* set the 7111 gpio register -- I don't know what this does exactly */ - mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one); + mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one); mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std); } return 0; diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index 9edaca4371d..3d3c48db45d 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -626,9 +626,9 @@ ov511_i2c_write_internal(struct usb_ov511 *ov, break; /* Retry until idle */ - do + do { rc = reg_r(ov, R511_I2C_CTL); - while (rc > 0 && ((rc&1) == 0)); + } while (rc > 0 && ((rc&1) == 0)); if (rc < 0) break; @@ -703,9 +703,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) return rc; /* Retry until idle */ - do - rc = reg_r(ov, R511_I2C_CTL); - while (rc > 0 && ((rc&1) == 0)); + do { + rc = reg_r(ov, R511_I2C_CTL); + } while (rc > 0 && ((rc & 1) == 0)); if (rc < 0) return rc; @@ -729,9 +729,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg) return rc; /* Retry until idle */ - do + do { rc = reg_r(ov, R511_I2C_CTL); - while (rc > 0 && ((rc&1) == 0)); + } while (rc > 0 && ((rc&1) == 0)); if (rc < 0) return rc; diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 1cccd5c7704..dbc56074255 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -1635,15 +1635,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) case VIDIOCPWCGVIDCMD: { - ARG_DEF(struct pwc_video_command, cmd); + ARG_DEF(struct pwc_video_command, vcmd); - ARGR(cmd).type = pdev->type; - ARGR(cmd).release = pdev->release; - ARGR(cmd).command_len = pdev->cmd_len; - memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len); - ARGR(cmd).bandlength = pdev->vbandlength; - ARGR(cmd).frame_size = pdev->frame_size; - ARG_OUT(cmd) + ARGR(vcmd).type = pdev->type; + ARGR(vcmd).release = pdev->release; + ARGR(vcmd).command_len = pdev->cmd_len; + memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len); + ARGR(vcmd).bandlength = pdev->vbandlength; + ARGR(vcmd).frame_size = pdev->frame_size; + ARG_OUT(vcmd) break; } /* diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 59166b76010..cc27efe121d 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -736,12 +736,12 @@ static enum ParseState ibmcam_model2_320x240_parse_lines( * make black color and quit the horizontal scanning loop. */ if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) { - const int j = i * V4L_BYTES_PER_PIXEL; + const int offset = i * V4L_BYTES_PER_PIXEL; #if USES_IBMCAM_PUTPIXEL /* Refresh 'f' because we don't use it much with PUTPIXEL */ - f = frame->data + (v4l_linesize * frame->curline) + j; + f = frame->data + (v4l_linesize * frame->curline) + offset; #endif - memset(f, 0, v4l_linesize - j); + memset(f, 0, v4l_linesize - offset); break; } From 6c9de52884aeafb05a935467c3a2c05a2d445ab7 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 3 Sep 2008 17:11:54 -0300 Subject: [PATCH 428/638] V4L/DVB (8769): cx18: Simplify queue flush logic to prevent oops in cx18_flush_queues() cx18: Simplify queue flush logic to prevent oops in cx18_flush_queues(). If accounting of a queue is in error, logic borrowed from ivtv will cause an oops when flushing the queues for a stream. This change greatly simplifies the queue flush logic, and sets the queue back to sane defaults on a flush. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-queue.c | 98 ++++----------------------- 1 file changed, 15 insertions(+), 83 deletions(-) diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index a31da49f912..dbe792ac300 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -110,99 +110,31 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, return NULL; } -static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from, - struct cx18_queue *to, int clear, int full) -{ - struct cx18_buffer *buf = - list_entry(from->list.next, struct cx18_buffer, list); - - list_move_tail(from->list.next, &to->list); - from->buffers--; - from->length -= s->buf_size; - from->bytesused -= buf->bytesused - buf->readpos; - /* special handling for q_free */ - if (clear) - buf->bytesused = buf->readpos = buf->b_flags = 0; - else if (full) { - /* special handling for stolen buffers, assume - all bytes are used. */ - buf->bytesused = s->buf_size; - buf->readpos = buf->b_flags = 0; - } - to->buffers++; - to->length += s->buf_size; - to->bytesused += buf->bytesused - buf->readpos; -} - -/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'. - If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'. - If 'steal' != NULL, then buffers may also taken from that queue if - needed. - - The buffer is automatically cleared if it goes to the free queue. It is - also cleared if buffers need to be taken from the 'steal' queue and - the 'from' queue is the free queue. - - When 'from' is q_free, then needed_bytes is compared to the total - available buffer length, otherwise needed_bytes is compared to the - bytesused value. For the 'steal' queue the total available buffer - length is always used. - - -ENOMEM is returned if the buffers could not be obtained, 0 if all - buffers where obtained from the 'from' list and if non-zero then - the number of stolen buffers is returned. */ -static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from, - struct cx18_queue *steal, struct cx18_queue *to, - int needed_bytes) +/* Move all buffers of a queue to q_free, while flushing the buffers */ +static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q) { unsigned long flags; - int rc = 0; - int from_free = from == &s->q_free; - int to_free = to == &s->q_free; - int bytes_available; + struct cx18_buffer *buf; + + if (q == &s->q_free) + return; spin_lock_irqsave(&s->qlock, flags); - if (needed_bytes == 0) { - from_free = 1; - needed_bytes = from->length; - } - - bytes_available = from_free ? from->length : from->bytesused; - bytes_available += steal ? steal->length : 0; - - if (bytes_available < needed_bytes) { - spin_unlock_irqrestore(&s->qlock, flags); - return -ENOMEM; - } - if (from_free) { - u32 old_length = to->length; - - while (to->length - old_length < needed_bytes) { - if (list_empty(&from->list)) - from = steal; - if (from == steal) - rc++; /* keep track of 'stolen' buffers */ - cx18_queue_move_buf(s, from, to, 1, 0); - } - } else { - u32 old_bytesused = to->bytesused; - - while (to->bytesused - old_bytesused < needed_bytes) { - if (list_empty(&from->list)) - from = steal; - if (from == steal) - rc++; /* keep track of 'stolen' buffers */ - cx18_queue_move_buf(s, from, to, to_free, rc); - } + while (!list_empty(&q->list)) { + buf = list_entry(q->list.next, struct cx18_buffer, list); + list_move_tail(q->list.next, &s->q_free.list); + buf->bytesused = buf->readpos = buf->b_flags = 0; + s->q_free.buffers++; + s->q_free.length += s->buf_size; } + cx18_queue_init(q); spin_unlock_irqrestore(&s->qlock, flags); - return rc; } void cx18_flush_queues(struct cx18_stream *s) { - cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0); - cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0); + cx18_queue_flush(s, &s->q_io); + cx18_queue_flush(s, &s->q_full); } int cx18_stream_alloc(struct cx18_stream *s) From cba99ae81901fe61ac4b0d65c697474af29dc4ea Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 17:11:58 -0300 Subject: [PATCH 429/638] V4L/DVB (8778): radio: fix incorrect video_register_device result check Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/dsbr100.c | 2 +- drivers/media/radio/radio-aimslab.c | 3 +-- drivers/media/radio/radio-aztech.c | 3 +-- drivers/media/radio/radio-cadet.c | 2 +- drivers/media/radio/radio-gemtek-pci.c | 2 +- drivers/media/radio/radio-gemtek.c | 3 +-- drivers/media/radio/radio-maestro.c | 3 +-- drivers/media/radio/radio-maxiradio.c | 2 +- drivers/media/radio/radio-rtrack2.c | 3 +-- drivers/media/radio/radio-sf16fmi.c | 2 +- drivers/media/radio/radio-si470x.c | 4 ++-- drivers/media/radio/radio-terratec.c | 3 +-- drivers/media/radio/radio-trust.c | 3 +-- drivers/media/radio/radio-zoltrix.c | 3 +-- 14 files changed, 15 insertions(+), 23 deletions(-) diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 1ed88f3abe6..70c65a74592 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -493,7 +493,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, radio->usbdev = interface_to_usbdev(intf); radio->curfreq = FREQ_MIN*FREQ_MUL; video_set_drvdata(radio->videodev, radio); - if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) { + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) { warn("Could not register video device"); video_device_release(radio->videodev); kfree(radio->transfer_buffer); diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index eba9209b302..1f064f4b32d 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -426,8 +426,7 @@ static int __init rtrack_init(void) rtrack_radio.priv=&rtrack_unit; - if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); return -EINVAL; } diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c index 3fe5504428c..628c689e3ff 100644 --- a/drivers/media/radio/radio-aztech.c +++ b/drivers/media/radio/radio-aztech.c @@ -394,8 +394,7 @@ static int __init aztech_init(void) mutex_init(&lock); aztech_radio.priv=&aztech_unit; - if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io,2); return -EINVAL; } diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c index 6166e726ed7..04c3698d32e 100644 --- a/drivers/media/radio/radio-cadet.c +++ b/drivers/media/radio/radio-cadet.c @@ -682,7 +682,7 @@ static int __init cadet_init(void) } if (!request_region(io,2,"cadet")) goto fail; - if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) { + if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io,2); goto fail; } diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index 36e754e3ffb..5cd7f032298 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -425,7 +425,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci } *devradio = vdev_template; - if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) { + if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) { kfree( devradio ); goto err_video; } diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c index 2b1a6221de6..0a0f956bb30 100644 --- a/drivers/media/radio/radio-gemtek.c +++ b/drivers/media/radio/radio-gemtek.c @@ -612,8 +612,7 @@ static int __init gemtek_init(void) gemtek_radio.priv = &gemtek_unit; - if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, - radio_nr) == -1) { + if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 1); return -EBUSY; } diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 0ada1c697e8..9ef0a763eeb 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -409,8 +409,7 @@ static int __devinit maestro_probe(struct pci_dev *pdev, video_set_drvdata(maestro_radio_inst, radio_unit); pci_set_drvdata(pdev, maestro_radio_inst); - retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, - radio_nr); + retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr); if (retval) { printk(KERN_ERR "can't register video device!\n"); goto errfr1; diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index e210da16156..0cc6fcb041f 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -410,7 +410,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d mutex_init(&radio_unit.lock); maxiradio_radio.priv = &radio_unit; - if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) { + if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) { printk("radio-maxiradio: can't register device!"); goto err_out_free_region; } diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c index e2dde080726..6d820e2481e 100644 --- a/drivers/media/radio/radio-rtrack2.c +++ b/drivers/media/radio/radio-rtrack2.c @@ -332,8 +332,7 @@ static int __init rtrack2_init(void) rtrack2_radio.priv=&rtrack2_unit; spin_lock_init(&lock); - if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 4); return -EINVAL; } diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index bb5d92f104a..0d478f54a90 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -377,7 +377,7 @@ static int __init fmi_init(void) mutex_init(&lock); - if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) { + if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); return -EINVAL; } diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index a4984ff87c9..16c7ef20265 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1694,8 +1694,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, INIT_DELAYED_WORK(&radio->work, si470x_work); /* register video device */ - if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { - retval = -EIO; + retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr); + if (retval) { printk(KERN_WARNING DRIVER_NAME ": Could not register video device\n"); goto err_all; diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c index cefa44fc5ae..0876fecc5f2 100644 --- a/drivers/media/radio/radio-terratec.c +++ b/drivers/media/radio/radio-terratec.c @@ -405,8 +405,7 @@ static int __init terratec_init(void) spin_lock_init(&lock); - if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io,2); return -EINVAL; } diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c index d70172d23ed..19316195625 100644 --- a/drivers/media/radio/radio-trust.c +++ b/drivers/media/radio/radio-trust.c @@ -378,8 +378,7 @@ static int __init trust_init(void) printk(KERN_ERR "trust: port 0x%x already in use\n", io); return -EBUSY; } - if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); return -EINVAL; } diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c index 9f17a332fa1..51d57ed3b3e 100644 --- a/drivers/media/radio/radio-zoltrix.c +++ b/drivers/media/radio/radio-zoltrix.c @@ -446,8 +446,7 @@ static int __init zoltrix_init(void) return -EBUSY; } - if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1) - { + if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); return -EINVAL; } From dc60de338f4b2d445a24d4e36bbc994f3badb406 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 17:11:58 -0300 Subject: [PATCH 430/638] V4L/DVB (8779): v4l: fix more incorrect video_register_device result checks Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bw-qcam.c | 3 +-- drivers/media/video/c-qcam.c | 3 +-- drivers/media/video/cpia.c | 2 +- drivers/media/video/cpia2/cpia2_v4l.c | 3 +-- drivers/media/video/se401.c | 2 +- drivers/media/video/stv680.c | 2 +- drivers/media/video/usbvideo/vicam.c | 2 +- drivers/media/video/w9966.c | 2 +- 8 files changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index d3b3268bace..6e39e253ce5 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -946,8 +946,7 @@ static int init_bwqcam(struct parport *port) printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name); - if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1) - { + if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { parport_unregister_device(qcam->pdev); kfree(qcam); return -ENODEV; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index fe9379b282d..7f6c6b4bec1 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -787,8 +787,7 @@ static int init_cqcam(struct parport *port) parport_release(qcam->pdev); - if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1) - { + if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { printk(KERN_ERR "Unable to register Colour QuickCam on %s\n", qcam->pport->name); parport_unregister_device(qcam->pdev); diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index dc8cc6115e2..a661800b0e6 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -3955,7 +3955,7 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve camera->lowlevel_data = lowlevel; /* register v4l device */ - if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { kfree(camera); printk(KERN_DEBUG "video_register_device failed\n"); return NULL; diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index c8257060642..eb9f15cd4c4 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -1958,8 +1958,7 @@ int cpia2_register_camera(struct camera_data *cam) reset_camera_struct_v4l(cam); /* register v4l device */ - if (video_register_device - (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { ERR("video_register_device failed\n"); video_device_release(cam->vdev); return -ENODEV; diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index f481277892d..acceed5d04a 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -1397,7 +1397,7 @@ static int se401_probe(struct usb_interface *intf, mutex_init(&se401->lock); wmb(); - if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { kfree(se401); err("video_register_device failed"); return -EIO; diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index 56dc3d6b5b2..dce94743945 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -1462,7 +1462,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id mutex_init (&stv680->lock); wmb (); - if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) { + if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) { PDEBUG (0, "STV(e): video_register_device failed"); retval = -EIO; goto error_vdev; diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index b7792451a29..2eb45829791 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -866,7 +866,7 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) cam->udev = dev; cam->bulkEndpoint = bulkEndpoint; - if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) { + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) { kfree(cam); printk(KERN_WARNING "video_register_device failed\n"); return -EIO; diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 9402f40095b..2ff00bc5ad6 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -334,7 +334,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port) memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device)); cam->vdev.priv = cam; - if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) + if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) return -1; w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV); From c5bf204f42423f49d7ea34f14eef92780204e168 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Sep 2008 17:12:09 -0300 Subject: [PATCH 431/638] V4L/DVB (8790): saa7115: call i2c_set_clientdata only when state != NULL Not a bug as such, but it looks really strange doing this before checking whether the state structure could be allocated. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7115.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c index bcd1c8f6cf6..ad733caec72 100644 --- a/drivers/media/video/saa7115.c +++ b/drivers/media/video/saa7115.c @@ -1489,10 +1489,9 @@ static int saa7115_probe(struct i2c_client *client, client->addr << 1, client->adapter->name); state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL); - i2c_set_clientdata(client, state); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } + i2c_set_clientdata(client, state); state->input = -1; state->output = SAA7115_IPORT_ON; state->enable = 1; From 4fc85c74b431ba6e9a8e295e090cd532667b984d Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 3 Sep 2008 17:12:12 -0300 Subject: [PATCH 432/638] V4L/DVB (8803): s5h1409: Enable QAM_AUTO mode If apps pass QAM_AUTO then we need to obey it. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 5ddb2dca305..0a56ae87832 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -404,6 +404,7 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe, break; case QAM_64: case QAM_256: + case QAM_AUTO: dprintk("%s() QAM_AUTO (64/256)\n", __func__); if (state->if_freq != S5H1409_QAM_IF_FREQ) s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ); From 5ca947a999c5ea5147cce3e42a9d790d3b87a246 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 3 Sep 2008 17:12:12 -0300 Subject: [PATCH 433/638] V4L/DVB (8804): s5h1411: Enable QAM_AUTO mode If apps pass QAM_AUTO then we need to obey it. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1411.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index cff360ce1ba..763ac102c9c 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -488,6 +488,7 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe, break; case QAM_64: case QAM_256: + case QAM_AUTO: dprintk("%s() QAM_AUTO (64/256)\n", __func__); s5h1411_set_if_freq(fe, state->config->qam_if); s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171); From 6d8976164dd7d10d25fe940b8546265f60ad52cd Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 3 Sep 2008 17:12:12 -0300 Subject: [PATCH 434/638] V4L/DVB (8805): Steven Toth email address change I need this so I can better isolate my linux email from my corporate email. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mt2131.c | 2 +- drivers/media/common/tuners/mt2131.h | 2 +- drivers/media/common/tuners/mt2131_priv.h | 2 +- drivers/media/common/tuners/mxl5005s.c | 4 ++-- drivers/media/common/tuners/mxl5005s.h | 2 +- drivers/media/common/tuners/xc5000.c | 2 +- drivers/media/common/tuners/xc5000.h | 2 +- drivers/media/common/tuners/xc5000_priv.h | 2 +- drivers/media/dvb/frontends/au8522.c | 2 +- drivers/media/dvb/frontends/au8522.h | 2 +- drivers/media/dvb/frontends/cx22702.c | 2 +- drivers/media/dvb/frontends/cx22702.h | 2 +- drivers/media/dvb/frontends/cx24123.c | 2 +- drivers/media/dvb/frontends/cx24123.h | 2 +- drivers/media/dvb/frontends/s5h1409.c | 2 +- drivers/media/dvb/frontends/s5h1409.h | 2 +- drivers/media/dvb/frontends/s5h1411.c | 2 +- drivers/media/dvb/frontends/s5h1411.h | 2 +- drivers/media/dvb/frontends/tda10048.c | 2 +- drivers/media/dvb/frontends/tda10048.h | 2 +- drivers/media/video/au0828/au0828-cards.c | 2 +- drivers/media/video/au0828/au0828-cards.h | 2 +- drivers/media/video/au0828/au0828-core.c | 4 ++-- drivers/media/video/au0828/au0828-dvb.c | 2 +- drivers/media/video/au0828/au0828-i2c.c | 2 +- drivers/media/video/au0828/au0828-reg.h | 2 +- drivers/media/video/au0828/au0828.h | 2 +- drivers/media/video/cx18/cx18-dvb.c | 2 +- drivers/media/video/cx18/cx18-dvb.h | 2 +- drivers/media/video/cx23885/cx23885-417.c | 2 +- drivers/media/video/cx23885/cx23885-cards.c | 2 +- drivers/media/video/cx23885/cx23885-core.c | 4 ++-- drivers/media/video/cx23885/cx23885-dvb.c | 2 +- drivers/media/video/cx23885/cx23885-i2c.c | 2 +- drivers/media/video/cx23885/cx23885-reg.h | 2 +- drivers/media/video/cx23885/cx23885-vbi.c | 2 +- drivers/media/video/cx23885/cx23885-video.c | 4 ++-- drivers/media/video/cx23885/cx23885.h | 2 +- drivers/media/video/cx25840/cx25840-core.c | 2 +- 39 files changed, 43 insertions(+), 43 deletions(-) diff --git a/drivers/media/common/tuners/mt2131.c b/drivers/media/common/tuners/mt2131.c index e254bcfc2ef..e8d3c48f860 100644 --- a/drivers/media/common/tuners/mt2131.c +++ b/drivers/media/common/tuners/mt2131.c @@ -1,7 +1,7 @@ /* * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/mt2131.h b/drivers/media/common/tuners/mt2131.h index cd8376f6f7b..6632de640df 100644 --- a/drivers/media/common/tuners/mt2131.h +++ b/drivers/media/common/tuners/mt2131.h @@ -1,7 +1,7 @@ /* * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/mt2131_priv.h b/drivers/media/common/tuners/mt2131_priv.h index e930759c2c0..4e05a67e88c 100644 --- a/drivers/media/common/tuners/mt2131_priv.h +++ b/drivers/media/common/tuners/mt2131_priv.h @@ -1,7 +1,7 @@ /* * Driver for Microtune MT2131 "QAM/8VSB single chip tuner" * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 0dc2bef9f6a..227642b044a 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -2,7 +2,7 @@ MaxLinear MXL5005S VSB/QAM/DVBT tuner driver Copyright (C) 2008 MaxLinear - Copyright (C) 2006 Steven Toth + Copyright (C) 2006 Steven Toth Functions: mxl5005s_reset() mxl5005s_writereg() @@ -3837,7 +3837,7 @@ static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis) /* ---------------------------------------------------------------- * Begin: Everything after here is new code to adapt the * proprietary Realtek driver into a Linux API tuner. - * Copyright (C) 2008 Steven Toth + * Copyright (C) 2008 Steven Toth */ static int mxl5005s_reset(struct dvb_frontend *fe) { diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h index 396db150bf0..7ac6815b30a 100644 --- a/drivers/media/common/tuners/mxl5005s.h +++ b/drivers/media/common/tuners/mxl5005s.h @@ -2,7 +2,7 @@ MaxLinear MXL5005S VSB/QAM/DVBT tuner driver Copyright (C) 2008 MaxLinear - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 5f99de0ad61..dcddfa803a7 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -2,7 +2,7 @@ * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" * * Copyright (c) 2007 Xceive Corporation - * Copyright (c) 2007 Steven Toth + * Copyright (c) 2007 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index c910715addc..5389f740945 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -1,7 +1,7 @@ /* * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" * - * Copyright (c) 2007 Steven Toth + * Copyright (c) 2007 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h index a72a9887fe7..b2a0074c99c 100644 --- a/drivers/media/common/tuners/xc5000_priv.h +++ b/drivers/media/common/tuners/xc5000_priv.h @@ -1,7 +1,7 @@ /* * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" * - * Copyright (c) 2007 Steven Toth + * Copyright (c) 2007 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 5a6cbb47627..0b82cc2a1e1 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -1,7 +1,7 @@ /* Auvitek AU8522 QAM/8VSB demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h index afc9af26e7a..595915ade8c 100644 --- a/drivers/media/dvb/frontends/au8522.h +++ b/drivers/media/dvb/frontends/au8522.h @@ -1,7 +1,7 @@ /* Auvitek AU8522 QAM/8VSB demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index cc1db4e371c..9430e03dba6 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -7,7 +7,7 @@ Copyright (C) 2001-2002 Convergence Integrated Media GmbH Holger Waechtler - Copyright (C) 2004 Steven Toth + Copyright (C) 2004 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index 8af766a3155..b1e465c6c2c 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -7,7 +7,7 @@ Copyright (C) 2001-2002 Convergence Integrated Media GmbH Holger Waechtler - Copyright (C) 2004 Steven Toth + Copyright (C) 2004 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index 7f68d78c655..386bd7472b9 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -1,7 +1,7 @@ /* * Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver * - * Copyright (C) 2005 Steven Toth + * Copyright (C) 2005 Steven Toth * * Support for KWorld DVB-S 100 by Vadim Catana * diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index 81ebc3d2f19..cc6b411d6d2 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -1,7 +1,7 @@ /* Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver - Copyright (C) 2005 Steven Toth + Copyright (C) 2005 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 0a56ae87832..7500a1c53e6 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -1,7 +1,7 @@ /* Samsung S5H1409 VSB/QAM demodulator driver - Copyright (C) 2006 Steven Toth + Copyright (C) 2006 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index 59f4335964c..d1a1d2eb8e1 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -1,7 +1,7 @@ /* Samsung S5H1409 VSB/QAM demodulator driver - Copyright (C) 2006 Steven Toth + Copyright (C) 2006 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 763ac102c9c..2da1a3763de 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -1,7 +1,7 @@ /* Samsung S5H1411 VSB/QAM demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h index 1855f64ed4d..7d542bc00c4 100644 --- a/drivers/media/dvb/frontends/s5h1411.h +++ b/drivers/media/dvb/frontends/s5h1411.h @@ -1,7 +1,7 @@ /* Samsung S5H1411 VSB/QAM demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index 0ab8d86b3ae..7727099a16f 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -1,7 +1,7 @@ /* NXP TDA10048HN DVB OFDM demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h index 2b5c78e62c8..0457b24601f 100644 --- a/drivers/media/dvb/frontends/tda10048.h +++ b/drivers/media/dvb/frontends/tda10048.h @@ -1,7 +1,7 @@ /* NXP TDA10048HN DVB OFDM demodulator driver - Copyright (C) 2008 Steven Toth + Copyright (C) 2008 Steven Toth This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 14b9fc9bb62..ed48908a903 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -1,7 +1,7 @@ /* * Driver for the Auvitek USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h index 102ed03dc6b..48a1882c2b6 100644 --- a/drivers/media/video/au0828/au0828-cards.h +++ b/drivers/media/video/au0828/au0828-cards.h @@ -1,7 +1,7 @@ /* * Driver for the Auvitek USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c index 54bfc0f0529..d856de9f742 100644 --- a/drivers/media/video/au0828/au0828-core.c +++ b/drivers/media/video/au0828/au0828-core.c @@ -1,7 +1,7 @@ /* * Driver for the Auvitek USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -252,5 +252,5 @@ module_init(au0828_init); module_exit(au0828_exit); MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); -MODULE_AUTHOR("Steven Toth "); +MODULE_AUTHOR("Steven Toth "); MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index 194865380ce..ba94be7e0ac 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -1,7 +1,7 @@ /* * Driver for the Auvitek USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c index 741a4937b05..d618fbaade1 100644 --- a/drivers/media/video/au0828/au0828-i2c.c +++ b/drivers/media/video/au0828/au0828-i2c.c @@ -1,7 +1,7 @@ /* * Driver for the Auvitek AU0828 USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h index 39827550891..1e87fa0c684 100644 --- a/drivers/media/video/au0828/au0828-reg.h +++ b/drivers/media/video/au0828/au0828-reg.h @@ -1,7 +1,7 @@ /* * Driver for the Auvitek USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h index 7beb571798e..4f10ff30013 100644 --- a/drivers/media/video/au0828/au0828.h +++ b/drivers/media/video/au0828/au0828.h @@ -1,7 +1,7 @@ /* * Driver for the Auvitek AU0828 USB bridge * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index cae38985b13..1e420a804fc 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -1,7 +1,7 @@ /* * cx18 functions for DVB support * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h index d6a6ccda79a..bf8d8f6f545 100644 --- a/drivers/media/video/cx18/cx18-dvb.h +++ b/drivers/media/video/cx18/cx18-dvb.h @@ -1,7 +1,7 @@ /* * cx18 functions for DVB support * - * Copyright (c) 2008 Steven Toth + * Copyright (c) 2008 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 8118091568f..7b0e8c01692 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -4,7 +4,7 @@ * * (c) 2004 Jelle Foks * (c) 2004 Gerd Knorr - * (c) 2008 Steven Toth + * (c) 2008 Steven Toth * - CX23885/7/8 support * * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index a19de850955..c36d3f63210 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 6286a9cf957..25fb0993874 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,7 +33,7 @@ #include "cx23885.h" MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); -MODULE_AUTHOR("Steven Toth "); +MODULE_AUTHOR("Steven Toth "); MODULE_LICENSE("GPL"); static unsigned int debug; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0a2e6558cd6..291b9d008da 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index c6bb0a05bc1..f98e476e961 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index bdd11bc513a..20b68a23626 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c index e36e3fcae2f..35e61cd112f 100644 --- a/drivers/media/video/cx23885/cx23885-vbi.c +++ b/drivers/media/video/cx23885/cx23885-vbi.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2007 Steven Toth + * Copyright (c) 2007 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index ad2235dab5b..6047c78d84b 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2007 Steven Toth + * Copyright (c) 2007 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,7 @@ #endif MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards"); -MODULE_AUTHOR("Steven Toth "); +MODULE_AUTHOR("Steven Toth "); MODULE_LICENSE("GPL"); /* ------------------------------------------------------------------ */ diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 00dfdc89d64..e23d97c071e 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -1,7 +1,7 @@ /* * Driver for the Conexant CX23885 PCIe bridge * - * Copyright (c) 2006 Steven Toth + * Copyright (c) 2006 Steven Toth * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 209d3bcb5db..4da8cd74f00 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -13,7 +13,7 @@ * NTSC sliced VBI support by Christopher Neufeld * with additional fixes by Hans Verkuil . * - * CX23885 support by Steven Toth . + * CX23885 support by Steven Toth . * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License From d6db35e89c420d867e9ffdf145ecf2cb1b91291b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:13 -0300 Subject: [PATCH 435/638] V4L/DVB (8809): gspca: Revert commit 9a9335776548d01525141c6e8f0c12e86bbde982 the previous patch (sensor upside down). Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 -- drivers/media/video/gspca/gspca.h | 4 ---- drivers/media/video/gspca/zc3xx.c | 31 ++++++++++++------------------- include/linux/videodev2.h | 5 ----- 4 files changed, 12 insertions(+), 30 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 0b292ca0c08..bffddf52775 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -851,8 +851,6 @@ static int vidioc_querycap(struct file *file, void *priv, cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; - if (gspca_dev->flags & GSPCA_SENSOR_UPSIDE_DOWN_FLAG) - cap->capabilities |= V4L2_CAP_SENSOR_UPSIDE_DOWN; return 0; } diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 1920c99d6f4..2596568e82f 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -118,9 +118,6 @@ struct gspca_frame { struct v4l2_buffer v4l2_buf; }; -/* defines for the flags member */ -#define GSPCA_SENSOR_UPSIDE_DOWN_FLAG 0x01 - struct gspca_dev { struct video_device vdev; /* !! must be the first item */ struct file_operations fops; @@ -166,7 +163,6 @@ struct gspca_dev { char nurbs; /* number of allocated URBs */ char memory; /* memory type (V4L2_MEMORY_xxx) */ __u8 nbalt; /* number of USB alternate settings */ - __u8 flags; /* see GSPCA_XXX_FLAG defines */ }; int gspca_dev_probe(struct usb_interface *intf, diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index f1d8c7a08ba..79436f27cd4 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -70,10 +70,6 @@ struct sd { unsigned short chip_revision; }; -#define DRIVER_INFO(sensor, flags) .driver_info = ((sensor) << 8) | (flags) -#define DRIVER_INFO_GET_SENSOR(driver_info) ((driver_info) >> 8) -#define DRIVER_INFO_GET_FLAGS(driver_info) ((driver_info) & 0xff) - /* V4L2 controls supported by the driver */ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); @@ -7019,8 +7015,7 @@ static int sd_config(struct gspca_dev *gspca_dev, /* define some sensors from the vendor/product */ sd->sharpness = 2; - sd->sensor = DRIVER_INFO_GET_SENSOR(id->driver_info); - gspca_dev->flags = DRIVER_INFO_GET_FLAGS(id->driver_info); + sd->sensor = id->driver_info; sensor = zcxx_probeSensor(gspca_dev); if (sensor >= 0) PDEBUG(D_PROBE, "probe sensor -> %02x", sensor); @@ -7510,19 +7505,19 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x041e, 0x4017)}, - {USB_DEVICE(0x041e, 0x401c), DRIVER_INFO(SENSOR_PAS106, 0)}, + {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x401e)}, {USB_DEVICE(0x041e, 0x401f)}, #endif {USB_DEVICE(0x041e, 0x4029)}, #ifndef CONFIG_USB_ZC0301 - {USB_DEVICE(0x041e, 0x4034), DRIVER_INFO(SENSOR_PAS106, 0)}, - {USB_DEVICE(0x041e, 0x4035), DRIVER_INFO(SENSOR_PAS106, 0)}, + {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x4036)}, {USB_DEVICE(0x041e, 0x403a)}, #endif - {USB_DEVICE(0x041e, 0x4051), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, - {USB_DEVICE(0x041e, 0x4053), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, + {USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250}, + {USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0458, 0x7007)}, {USB_DEVICE(0x0458, 0x700c)}, @@ -7548,13 +7543,11 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x08d9)}, {USB_DEVICE(0x046d, 0x08d8)}, {USB_DEVICE(0x046d, 0x08da)}, - {USB_DEVICE(0x046d, 0x08dd), DRIVER_INFO(SENSOR_MC501CB, 0)}, - {USB_DEVICE(0x0471, 0x0325), DRIVER_INFO(SENSOR_PAS106, - GSPCA_SENSOR_UPSIDE_DOWN_FLAG)}, - {USB_DEVICE(0x0471, 0x0326), DRIVER_INFO(SENSOR_PAS106, - GSPCA_SENSOR_UPSIDE_DOWN_FLAG)}, - {USB_DEVICE(0x0471, 0x032d), DRIVER_INFO(SENSOR_PAS106, 0)}, - {USB_DEVICE(0x0471, 0x032e), DRIVER_INFO(SENSOR_PAS106, 0)}, + {USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB}, + {USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106}, + {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x055f, 0xc005)}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x055f, 0xd003)}, @@ -7566,7 +7559,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0ac8, 0x301b)}, {USB_DEVICE(0x0ac8, 0x303b)}, #endif - {USB_DEVICE(0x0ac8, 0x305b), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)}, + {USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250}, #ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0ac8, 0x307b)}, {USB_DEVICE(0x10fd, 0x0128)}, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 4c30655b293..6c73516b74c 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -261,11 +261,6 @@ struct v4l2_capability { #define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */ #define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */ -/* This flags gets set if the "sensor" is known to be upside down and this can - *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag - is not a guarantee for the image not being upside down. */ -#define V4L2_CAP_SENSOR_UPSIDE_DOWN 0x10000000 - /* * V I D E O I M A G E F O R M A T */ From 62ee8eeebd1bf6c29977800ac18dfcecf584d42e Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:13 -0300 Subject: [PATCH 436/638] V4L/DVB (8810): gspca: Compile error when CONFIG_PM not defined. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index bffddf52775..28842ed24c0 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -114,7 +114,9 @@ static void fill_frame(struct gspca_dev *gspca_dev, cam_pkt_op pkt_scan; if (urb->status != 0) { +#ifdef CONFIG_PM if (!gspca_dev->frozen) +#endif PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status); return; /* disconnection ? */ } From 327c4abf74a4426676df6c359b2a3dea2a5d126e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:14 -0300 Subject: [PATCH 437/638] V4L/DVB (8812): gspca: Do pac73xx webcams work. - documentation for some registers - some preparations for adding autogain_n_exposure functionality - various pac7311 fixes - disable brightness and colors controls for 7311 - fix contrast control for 7311 - add hflip and vflip controls for 7311 - minimal jpeg header - proper SOF detection Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac207.c | 36 +-- drivers/media/video/gspca/pac7311.c | 309 +++++++++++++------------ drivers/media/video/gspca/pac_common.h | 53 +++++ 3 files changed, 220 insertions(+), 178 deletions(-) create mode 100644 drivers/media/video/gspca/pac_common.h diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index d9668f4cb4d..620c9631629 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -181,9 +181,6 @@ static const __u8 pac207_sensor_init[][8] = { /* 48 reg_72 Rate Control end BalSize_4a =0x36 */ static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 }; -static const unsigned char pac207_sof_marker[5] = - { 0xff, 0xff, 0x00, 0xff, 0x96 }; - static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index, const u8 *buffer, u16 length) { @@ -367,31 +364,8 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES; } -static unsigned char *pac207_find_sof(struct gspca_dev *gspca_dev, - unsigned char *m, int len) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - - /* Search for the SOF marker (fixed part) in the header */ - for (i = 0; i < len; i++) { - if (m[i] == pac207_sof_marker[sd->sof_read]) { - sd->sof_read++; - if (sd->sof_read == sizeof(pac207_sof_marker)) { - PDEBUG(D_STREAM, - "SOF found, bytes to analyze: %u." - " Frame starts at byte #%u", - len, i + 1); - sd->sof_read = 0; - return m + i + 1; - } - } else { - sd->sof_read = 0; - } - } - - return NULL; -} +/* Include pac common sof detection functions */ +#include "pac_common.h" static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, @@ -401,14 +375,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; unsigned char *sof; - sof = pac207_find_sof(gspca_dev, data, len); + sof = pac_find_sof(gspca_dev, data, len); if (sof) { int n; /* finish decoding current frame */ n = sof - data; - if (n > sizeof pac207_sof_marker) - n -= sizeof pac207_sof_marker; + if (n > sizeof pac_sof_marker) + n -= sizeof pac_sof_marker; else n = 0; frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 4cc9379ee41..bed04cc9a58 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -19,10 +19,36 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* Some documentation about various registers as determined by trial and error. + When the register addresses differ between the 7202 and the 7311 the 2 + different addresses are written as 7302addr/7311addr, when one of the 2 + addresses is a - sign that register description is not valid for the + matching IC. + + Register page 1: + + Address Description + -/0x08 Unknown compressor related, must always be 8 except when not + in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 ! + -/0x1b Auto white balance related, bit 0 is AWB enable (inverted) + bits 345 seem to toggle per color gains on/off (inverted) + 0x78 Global control, bit 6 controls the LED (inverted) + -/0x80 JPEG compression ratio ? Best not touched + + Register page 3/4: + + Address Description + 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on + the 7302, so one of 3, 6, 9, ... + -/0x0f Master gain 1-245, low value = high gain + 0x10/- Master gain 0-31 + -/0x10 Another gain 0-15, limited influence (1-2x gain I guess) + 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused +*/ + #define MODULE_NAME "pac7311" #include "gspca.h" -#include "jpeg.h" MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li"); MODULE_DESCRIPTION("Pixart PAC7311"); @@ -32,25 +58,22 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - int lum_sum; - atomic_t avg_lum; - atomic_t do_gain; - unsigned char brightness; unsigned char contrast; unsigned char colors; unsigned char autogain; __u8 hflip; __u8 vflip; - __u8 qindex; - - char tosof; /* number of bytes before next start of frame */ - signed char ag_cnt; -#define AG_CNT_START 13 __u8 sensor; #define SENSOR_PAC7302 0 #define SENSOR_PAC7311 1 + + u8 sof_read; + u8 header_read; + u8 autogain_ignore_frames; + + atomic_t avg_lum; }; /* V4L2 controls supported by the driver */ @@ -92,7 +115,7 @@ static struct ctrl sd_ctrls[] = { #define CONTRAST_MAX 255 .maximum = CONTRAST_MAX, .step = 1, -#define CONTRAST_DEF 60 +#define CONTRAST_DEF 127 .default_value = CONTRAST_DEF, }, .set = sd_setcontrast, @@ -243,7 +266,7 @@ static const __u8 start_7302[] = { 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22, 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44, 0x6e, 1, 0x08, - 0xff, 1, 0x03, /* page 1 */ + 0xff, 1, 0x01, /* page 1 */ 0x78, 1, 0x00, 0, 0 /* end of sequence */ }; @@ -274,9 +297,9 @@ static const __u8 page3_7302[] = { /* pac 7311 */ static const __u8 probe_7311[] = { - 0x78, 0x40, /* Bit_0=start stream, Bit_7=LED */ - 0x78, 0x40, /* Bit_0=start stream, Bit_7=LED */ - 0x78, 0x44, /* Bit_0=start stream, Bit_7=LED */ + 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */ + 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */ + 0x78, 0x44, /* Bit_0=start stream, Bit_6=LED */ 0xff, 0x04, 0x27, 0x80, 0x28, 0xca, @@ -340,18 +363,6 @@ static void reg_w_buf(struct gspca_dev *gspca_dev, 500); } -static __u8 reg_r(struct gspca_dev *gspca_dev, - __u8 index) -{ - usb_control_msg(gspca_dev->dev, - usb_rcvctrlpipe(gspca_dev->dev, 0), - 0, /* request */ - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, /* value */ - index, gspca_dev->usb_buf, 1, - 500); - return gspca_dev->usb_buf[0]; -} static void reg_w(struct gspca_dev *gspca_dev, __u8 index, @@ -413,7 +424,7 @@ static void reg_w_var(struct gspca_dev *gspca_dev, reg_w_page(gspca_dev, page3_7302, sizeof page3_7302); break; default: - if (len > 32) { + if (len > 64) { PDEBUG(D_ERR|D_STREAM, "Incorrect variable sequence"); return; @@ -453,7 +464,7 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = 1; } else { PDEBUG(D_CONF, "Find Sensor PAC7311"); - reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302); + reg_w_seq(gspca_dev, probe_7311, sizeof probe_7311); cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); @@ -465,8 +476,6 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autogain = AUTOGAIN_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; - sd->qindex = 3; - sd->ag_cnt = -1; return 0; } @@ -497,6 +506,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xdc, 0x01); } +/* This function is used by pac7302 only */ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -506,7 +516,10 @@ static void setbrightness(struct gspca_dev *gspca_dev) setbrightcont(gspca_dev); return; } -/*jfm: inverted?*/ +/* HDG: this is not brightness but gain, I'll add gain and exposure controls + in a next patch */ + return; + brightness = BRIGHTNESS_MAX - sd->brightness; reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x0e, 0x00); @@ -524,12 +537,13 @@ static void setcontrast(struct gspca_dev *gspca_dev) setbrightcont(gspca_dev); return; } - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x10, sd->contrast); + reg_w(gspca_dev, 0xff, 0x04); + reg_w(gspca_dev, 0x10, sd->contrast >> 4); /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); } +/* This function is used by pac7302 only */ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -551,36 +565,24 @@ static void setcolors(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x0f + 2 * i + 1, v); } reg_w(gspca_dev, 0xdc, 0x01); - return; - } - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x80, sd->colors); - /* load registers to sensor (Bit 0, auto clear) */ - reg_w(gspca_dev, 0x11, 0x01); - PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); -} - -static void setautogain(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - - if (sd->autogain) { - sd->lum_sum = 0; - sd->ag_cnt = AG_CNT_START; - } else { - sd->ag_cnt = -1; + PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); } } -/* this function is used by pac7302 only */ static void sethvflip(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 data; - reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - data = (sd->hflip ? 0x00 : 0x08) - | (sd->vflip ? 0x04 : 0x00); + if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + data = (sd->hflip ? 0x00 : 0x08) + | (sd->vflip ? 0x04 : 0x00); + } else { + reg_w(gspca_dev, 0xff, 0x04); /* page 3 */ + data = (sd->hflip ? 0x04 : 0x00) + | (sd->vflip ? 0x08 : 0x00); + } reg_w(gspca_dev, 0x21, data); reg_w(gspca_dev, 0x11, 0x01); } @@ -588,7 +590,6 @@ static void sethvflip(struct gspca_dev *gspca_dev) /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { - reg_w(gspca_dev, 0x78, 0x44); /* Turn on LED */ return 0; } @@ -596,7 +597,7 @@ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - sd->tosof = 0; + sd->sof_read = 0; if (sd->sensor == SENSOR_PAC7302) reg_w_var(gspca_dev, start_7302); @@ -606,7 +607,6 @@ static void sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); - setautogain(gspca_dev); /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { @@ -621,7 +621,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; case 1: /* 320x240 pac7311 */ reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x07); + reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x30); @@ -650,6 +650,10 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); reg_w(gspca_dev, 0x78, 0x45); } + + sd->sof_read = 0; + sd->autogain_ignore_frames = 0; + atomic_set(&sd->avg_lum, -1); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -657,6 +661,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; if (sd->sensor == SENSOR_PAC7302) { + reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x00); reg_w(gspca_dev, 0x78, 0x00); return; @@ -668,9 +673,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x2a, 0x0e); reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x3e, 0x20); - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ - reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ + reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ + reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ + reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ } static void sd_stop0(struct gspca_dev *gspca_dev) @@ -690,42 +695,22 @@ static void sd_close(struct gspca_dev *gspca_dev) static void do_autogain(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; - int luma; - int luma_mean = 128; - int luma_delta = 20; - __u8 spring = 5; - int Gbright; - - if (!atomic_read(&sd->do_gain)) - return; - atomic_set(&sd->do_gain, 0); - - luma = atomic_read(&sd->avg_lum); - Gbright = reg_r(gspca_dev, 0x02); - PDEBUG(D_FRAM, "luma mean %d", luma); - if (luma < luma_mean - luma_delta || - luma > luma_mean + luma_delta) { - Gbright += (luma_mean - luma) >> spring; - if (Gbright > 0x1a) - Gbright = 0x1a; - else if (Gbright < 4) - Gbright = 4; - PDEBUG(D_FRAM, "gbright %d", Gbright); - if (sd->sensor == SENSOR_PAC7302) { - reg_w(gspca_dev, 0xff, 0x03); - reg_w(gspca_dev, 0x10, Gbright); - /* load registers to sensor (Bit 0, auto clear) */ - reg_w(gspca_dev, 0x11, 0x01); - } else { - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x0f, Gbright); - /* load registers to sensor (Bit 0, auto clear) */ - reg_w(gspca_dev, 0x11, 0x01); - } - } } +static const unsigned char pac7311_jpeg_header1[] = { + 0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08 +}; + +static const unsigned char pac7311_jpeg_header2[] = { + 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda, + 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00 +}; + +/* Include pac common sof detection functions */ +#include "pac_common.h" + +#define HEADER_LENGTH 2 + /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ @@ -733,58 +718,89 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; - int i; + unsigned char *sof; -#define INTER_FRAME 0x53 /* eof + inter frame + sof */ -#define LUM_OFFSET 0x1e /* reverse offset / start of frame */ + sof = pac_find_sof(gspca_dev, data, len); + if (sof) { + unsigned char tmpbuf[4]; + int n, lum_offset, footer_length; - /* - * inside a frame, there may be: - * escaped ff ('ff 00') - * sequences'ff ff ff xx' to remove - * end of frame ('ff d9') - * at the end of frame, there are: - * ff d9 end of frame - * 0x33 bytes - * one byte luminosity - * 0x16 bytes - * ff ff 00 ff 96 62 44 start of frame - */ - - if (sd->tosof != 0) { /* if outside a frame */ - - /* get the luminosity and go to the start of frame */ - data += sd->tosof; - len -= sd->tosof; - if (sd->tosof > LUM_OFFSET) - sd->lum_sum += data[-LUM_OFFSET]; - sd->tosof = 0; - jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21); - } - - for (i = 0; i < len; i++) { - if (data[i] != 0xff) - continue; - switch (data[i + 1]) { - case 0xd9: /* 'ff d9' end of frame */ - frame = gspca_frame_add(gspca_dev, - LAST_PACKET, - frame, data, i + 2); - data += i + INTER_FRAME; - len -= i + INTER_FRAME; - i = 0; - if (len > -LUM_OFFSET) - sd->lum_sum += data[-LUM_OFFSET]; - if (len < 0) { - sd->tosof = -len; - break; - } - jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21); - break; + if (sd->sensor == SENSOR_PAC7302) { + lum_offset = 34 + sizeof pac_sof_marker; + footer_length = 74; + } else { + lum_offset = 24 + sizeof pac_sof_marker; + footer_length = 26; } + + /* Finish decoding current frame */ + n = (sof - data) - (footer_length + sizeof pac_sof_marker); + if (n < 0) { + frame->data_end += n; + n = 0; + } + frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame, + data, n); + if (gspca_dev->last_packet_type != DISCARD_PACKET && + frame->data_end[-2] == 0xff && + frame->data_end[-1] == 0xd9) + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, + NULL, 0); + + n = sof - data; + len -= n; + data = sof; + + /* Get average lumination */ + if (gspca_dev->last_packet_type == LAST_PACKET && + n >= lum_offset) { + if (sd->sensor == SENSOR_PAC7302) + atomic_set(&sd->avg_lum, + (data[-lum_offset] << 8) | + data[-lum_offset + 1]); + else + atomic_set(&sd->avg_lum, + data[-lum_offset] + + data[-lum_offset + 1]); + } else { + atomic_set(&sd->avg_lum, -1); + } + + /* Start the new frame with the jpeg header */ + gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1)); + if (sd->sensor == SENSOR_PAC7302) { + /* The PAC7302 has the image rotated 90 degrees */ + tmpbuf[0] = gspca_dev->width >> 8; + tmpbuf[1] = gspca_dev->width & 0xff; + tmpbuf[2] = gspca_dev->height >> 8; + tmpbuf[3] = gspca_dev->height & 0xff; + } else { + tmpbuf[0] = gspca_dev->height >> 8; + tmpbuf[1] = gspca_dev->height & 0xff; + tmpbuf[2] = gspca_dev->width >> 8; + tmpbuf[3] = gspca_dev->width & 0xff; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4); + gspca_frame_add(gspca_dev, INTER_PACKET, frame, + pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2)); + + sd->header_read = 0; } - gspca_frame_add(gspca_dev, INTER_PACKET, - frame, data, i); + + if (sd->header_read < HEADER_LENGTH) { + /* skip the variable part of the sof header */ + int needed = HEADER_LENGTH - sd->header_read; + if (len <= needed) { + sd->header_read += len; + return; + } + data += needed; + len -= needed; + sd->header_read = HEADER_LENGTH; + } + + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) @@ -846,8 +862,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (gspca_dev->streaming) - setautogain(gspca_dev); + return 0; } diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h new file mode 100644 index 00000000000..a19b5d44c00 --- /dev/null +++ b/drivers/media/video/gspca/pac_common.h @@ -0,0 +1,53 @@ +/* + * Pixart PAC207BCA / PAC73xx common functions + * + * Copyright (C) 2008 Hans de Goede + * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li + * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr + * + * V4L2 by Jean-Francois Moine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +static const unsigned char pac_sof_marker[5] = + { 0xff, 0xff, 0x00, 0xff, 0x96 }; + +static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev, + unsigned char *m, int len) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + + /* Search for the SOF marker (fixed part) in the header */ + for (i = 0; i < len; i++) { + if (m[i] == pac_sof_marker[sd->sof_read]) { + sd->sof_read++; + if (sd->sof_read == sizeof(pac_sof_marker)) { + PDEBUG(D_STREAM, + "SOF found, bytes to analyze: %u." + " Frame starts at byte #%u", + len, i + 1); + sd->sof_read = 0; + return m + i + 1; + } + } else { + sd->sof_read = 0; + } + } + + return NULL; +} From 221e7dbe55fe515ff786142bac64b507fa9f26de Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:14 -0300 Subject: [PATCH 438/638] V4L/DVB (8813): gspca: Adjust SOF detection for pac73xx. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index bed04cc9a58..3c5142852f2 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -70,7 +70,6 @@ struct sd { #define SENSOR_PAC7311 1 u8 sof_read; - u8 header_read; u8 autogain_ignore_frames; atomic_t avg_lum; @@ -709,8 +708,6 @@ static const unsigned char pac7311_jpeg_header2[] = { /* Include pac common sof detection functions */ #include "pac_common.h" -#define HEADER_LENGTH 2 - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ @@ -784,22 +781,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4); gspca_frame_add(gspca_dev, INTER_PACKET, frame, pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2)); - - sd->header_read = 0; } - - if (sd->header_read < HEADER_LENGTH) { - /* skip the variable part of the sof header */ - int needed = HEADER_LENGTH - sd->header_read; - if (len <= needed) { - sd->header_read += len; - return; - } - data += needed; - len -= needed; - sd->header_read = HEADER_LENGTH; - } - gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } From f50ba1bed3cfd65d6899afc4cb77299ee5c297ae Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:14 -0300 Subject: [PATCH 439/638] V4L/DVB (8814): gspca: Set DISABLED the disabled controls at query control time. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/etoms.c | 2 ++ drivers/media/video/gspca/gspca.c | 33 +++++++++++++++++------------ drivers/media/video/gspca/gspca.h | 1 + drivers/media/video/gspca/pac7311.c | 4 ++++ drivers/media/video/gspca/sonixj.c | 25 +++++++++++++--------- drivers/media/video/gspca/vc032x.c | 3 +++ drivers/media/video/gspca/zc3xx.c | 16 ++++++++++++++ 7 files changed, 61 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index a3cccab7b81..e5a9eee673a 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -81,6 +81,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +#define COLOR_IDX 2 { { .id = V4L2_CID_SATURATION, @@ -665,6 +666,7 @@ static int sd_config(struct gspca_dev *gspca_dev, } else { cam->cam_mode = vga_mode; cam->nmodes = sizeof vga_mode / sizeof vga_mode[0]; + gspca_dev->ctrl_dis = (1 << COLOR_IDX); } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 28842ed24c0..33161e1e0bc 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -856,37 +856,44 @@ static int vidioc_querycap(struct file *file, void *priv, return 0; } -/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */ static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *q_ctrl) { struct gspca_dev *gspca_dev = priv; - int i; + int i, ix; u32 id; + ix = -1; id = q_ctrl->id; if (id & V4L2_CTRL_FLAG_NEXT_CTRL) { id &= V4L2_CTRL_ID_MASK; id++; for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) { - memcpy(q_ctrl, - &gspca_dev->sd_desc->ctrls[i].qctrl, - sizeof *q_ctrl); - return 0; + if (id < gspca_dev->sd_desc->ctrls[i].qctrl.id) + continue; + if (ix < 0) { + ix = i; + continue; } + if (gspca_dev->sd_desc->ctrls[i].qctrl.id + > gspca_dev->sd_desc->ctrls[ix].qctrl.id) + continue; + ix = i; } - return -EINVAL; } for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) { - memcpy(q_ctrl, - &gspca_dev->sd_desc->ctrls[i].qctrl, - sizeof *q_ctrl); - return 0; + ix = i; + break; } } - return -EINVAL; + if (ix < 0) + return -EINVAL; + memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl, + sizeof *q_ctrl); + if (gspca_dev->ctrl_dis & (1 << ix)) + q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + return 0; } static int vidioc_s_ctrl(struct file *file, void *priv, diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 2596568e82f..a804ef18b8d 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -126,6 +126,7 @@ struct gspca_dev { struct cam cam; /* device information */ const struct sd_desc *sd_desc; /* subdriver description */ + unsigned ctrl_dis; /* disabled controls (bit map) */ __u8 usb_buf[8]; /* buffer for USB exchanges */ struct urb *urb[MAX_NURBS]; diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 3c5142852f2..69d610062d0 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -150,6 +150,7 @@ static struct ctrl sd_ctrls[] = { .get = sd_getautogain, }, /* next controls work with pac7302 only */ +#define HFLIP_IDX 4 { { .id = V4L2_CID_HFLIP, @@ -164,6 +165,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_sethflip, .get = sd_gethflip, }, +#define VFLIP_IDX 5 { { .id = V4L2_CID_VFLIP, @@ -467,6 +469,8 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) + | (1 << VFLIP_IDX); } sd->brightness = BRIGHTNESS_DEF; diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 0d4677688c9..e657b8ba6db 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -116,6 +116,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, +#define AUTOGAIN_IDX 3 { { .id = V4L2_CID_AUTOGAIN, @@ -936,6 +937,14 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autogain = AUTOGAIN_DEF; sd->ag_cnt = -1; + switch (sd->sensor) { + case SENSOR_OV7630: + case SENSOR_OV7648: + case SENSOR_OV7660: + gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX); + break; + } + return 0; } @@ -1150,16 +1159,12 @@ static void setautogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - switch (sd->sensor) { - case SENSOR_HV7131R: - case SENSOR_MO4000: - case SENSOR_MI0360: - if (sd->autogain) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; - break; - } + if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX)) + return; + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; } /* -- start the camera -- */ diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 47c7ce641d9..5454f0eb007 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -69,6 +69,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +#define LIGHTFREQ_IDX 1 { { .id = V4L2_CID_POWER_LINE_FREQUENCY, @@ -1463,6 +1464,8 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->qindex = 7; sd->autogain = AUTOGAIN_DEF; sd->lightfreq = FREQ_DEF; + if (sd->sensor != SENSOR_OV7670) + gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX); if (sd->bridge == BRIDGE_VC0321) { reg_r(gspca_dev, 0x8a, 0, 3); diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 79436f27cd4..e78b9b7591d 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -85,6 +85,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val); static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +#define BRIGHTNESS_IDX 0 #define SD_BRIGHTNESS 0 { { @@ -141,6 +142,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +#define LIGHTFREQ_IDX 4 #define SD_FREQ 4 { { @@ -7150,6 +7152,20 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value; sd->sharpness = sd_ctrls[SD_SHARPNESS].qctrl.default_value; + switch (sd->sensor) { + case SENSOR_GC0305: + case SENSOR_OV7620: + case SENSOR_PO2030: + gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX); + break; + case SENSOR_HDCS2020: + case SENSOR_HV7131B: + case SENSOR_HV7131C: + case SENSOR_OV7630C: + gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX); + break; + } + /* switch the led off */ reg_w(gspca_dev->dev, 0x01, 0x0000); return 0; From 0f523c2ff6b5ab3b4412cf56dee77ac57be24103 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:14 -0300 Subject: [PATCH 440/638] V4L/DVB (8815): gspca: Fix problems with disabled controls. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 33161e1e0bc..e7e73ec7134 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -869,7 +869,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, id &= V4L2_CTRL_ID_MASK; id++; for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) { - if (id < gspca_dev->sd_desc->ctrls[i].qctrl.id) + if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id) continue; if (ix < 0) { ix = i; @@ -908,6 +908,8 @@ static int vidioc_s_ctrl(struct file *file, void *priv, i++, ctrls++) { if (ctrl->id != ctrls->qctrl.id) continue; + if (gspca_dev->ctrl_dis & (1 << i)) + return -EINVAL; if (ctrl->value < ctrls->qctrl.minimum || ctrl->value > ctrls->qctrl.maximum) return -ERANGE; @@ -934,6 +936,8 @@ static int vidioc_g_ctrl(struct file *file, void *priv, i++, ctrls++) { if (ctrl->id != ctrls->qctrl.id) continue; + if (gspca_dev->ctrl_dis & (1 << i)) + return -EINVAL; if (mutex_lock_interruptible(&gspca_dev->usb_lock)) return -ERESTARTSYS; ret = ctrls->get(gspca_dev, &ctrl->value); From e2ad2a54ad1e0f8d7c9e49c38b552a630e015af3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:15 -0300 Subject: [PATCH 441/638] V4L/DVB (8816): gspca: Set disabled ctrls and fix a register pb with ovxxxx in sonixb. - set some controls as disabled instead of copying the device descr. - in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after) using it to calculate reg 10. - disable brightness (instead of ignoring it) for the TAS5110. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 80 +++++++++++++++--------------- 1 file changed, 40 insertions(+), 40 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e535ced79f1..735d4260f2f 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -31,9 +31,6 @@ MODULE_LICENSE("GPL"); /* specific webcam descriptor */ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - - struct sd_desc sd_desc; /* our nctrls differ dependend upon the - sensor, so we use a per cam copy */ atomic_t avg_lum; unsigned char gain; @@ -60,9 +57,8 @@ struct sd { /* flags used in the device id table */ #define F_GAIN 0x01 /* has gain */ -#define F_AUTO 0x02 /* has autogain */ -#define F_SIF 0x04 /* sif or vga */ -#define F_H18 0x08 /* long (18 b) or short (12 b) frame header */ +#define F_SIF 0x02 /* sif or vga */ +#define F_H18 0x04 /* long (18 b) or short (12 b) frame header */ #define COMP2 0x8f #define COMP 0xc7 /* 0x87 //0x07 */ @@ -95,6 +91,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -109,6 +106,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +#define GAIN_IDX 1 { { .id = V4L2_CID_GAIN, @@ -124,6 +122,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setgain, .get = sd_getgain, }, +#define EXPOSURE_IDX 2 { { .id = V4L2_CID_EXPOSURE, @@ -140,6 +139,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setexposure, .get = sd_getexposure, }, +#define AUTOGAIN_IDX 3 { { .id = V4L2_CID_AUTOGAIN, @@ -155,6 +155,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, +#define FREQ_IDX 4 { { .id = V4L2_CID_POWER_LINE_FREQUENCY, @@ -545,9 +546,6 @@ static void setbrightness(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5110: - /* FIXME figure out howto control brightness on TAS5110 */ - break; } return; err: @@ -665,6 +663,11 @@ static void setexposure(struct gspca_dev *gspca_dev) else if (reg11 > 16) reg11 = 16; + /* In 640x480, if the reg11 has less than 3, the image is + unstable (not enough bandwidth). */ + if (gspca_dev->width == 640 && reg11 < 3) + reg11 = 3; + /* frame exposure time in ms = 1000 * reg11 / 30 -> reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */ reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11); @@ -678,11 +681,6 @@ static void setexposure(struct gspca_dev *gspca_dev) else if (reg10 > reg10_max) reg10 = reg10_max; - /* In 640x480, if the reg11 has less than 3, the image is - unstable (not enough bandwidth). */ - if (gspca_dev->width == 640 && reg11 < 3) - reg11 = 3; - /* Write reg 10 and reg11 low nibble */ i2c[1] = sd->sensor_addr; i2c[3] = reg10; @@ -759,23 +757,17 @@ static int sd_config(struct gspca_dev *gspca_dev, struct cam *cam; int sif = 0; - /* nctrls depends upon the sensor, so we use a per cam copy */ - memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc)); - gspca_dev->sd_desc = &sd->sd_desc; - /* copy the webcam info from the device id */ sd->sensor = (id->driver_info >> 24) & 0xff; if (id->driver_info & (F_GAIN << 16)) sd->sensor_has_gain = 1; - if (id->driver_info & (F_AUTO << 16)) - sd->sd_desc.dq_callback = do_autogain; if (id->driver_info & (F_SIF << 16)) sif = 1; if (id->driver_info & (F_H18 << 16)) sd->fr_h_sz = 18; /* size of frame header */ else sd->fr_h_sz = 12; - sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff; + gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff; sd->sensor_addr = id->driver_info & 0xff; cam = &gspca_dev->cam; @@ -790,7 +782,10 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = BRIGHTNESS_DEF; sd->gain = GAIN_DEF; sd->exposure = EXPOSURE_DEF; - sd->autogain = AUTOGAIN_DEF; + if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX)) + sd->autogain = 0; /* Disable do_autogain callback */ + else + sd->autogain = AUTOGAIN_DEF; sd->freq = FREQ_DEF; return 0; @@ -1169,50 +1164,55 @@ static const struct sd_desc sd_desc = { .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ -#define SFCI(sensor, flags, nctrls, i2c_addr) \ +#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \ .driver_info = (SENSOR_ ## sensor << 24) \ | ((flags) << 16) \ - | ((nctrls) << 8) \ + | ((disable_ctrls) << 8) \ | (i2c_addr) +#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) +#define NO_FREQ (1 << FREQ_IDX) +#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) + static __devinitdata struct usb_device_id device_table[] = { #ifndef CONFIG_USB_SN9C102 {USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */ - SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)}, + SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */ - SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)}, + SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */ - SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)}, + SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */ - SFCI(PAS106, F_SIF, 2, 0)}, + SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */ - SFCI(PAS106, F_SIF, 2, 0)}, + SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, #endif {USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */ - SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)}, + SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)}, #ifndef CONFIG_USB_SN9C102 {USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */ - SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)}, + SFCI(OV7630, F_GAIN, 0, 0x21)}, {USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */ - SFCI(TAS5130CXX, 0, 2, 0)}, + SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */ - SFCI(TAS5130CXX, 0, 2, 0)}, + SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */ - SFCI(PAS202, 0, 2, 0)}, + SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */ - SFCI(PAS106, F_SIF, 2, 0)}, + SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */ - SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)}, + SFCI(OV7630, F_GAIN, 0, 0x21)}, {USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */ - SFCI(HV7131R, 0, 2, 0)}, + SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */ - SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)}, + SFCI(OV7630, F_GAIN, 0, 0x21)}, {USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */ - SFCI(PAS202, F_H18, 2, 0)}, + SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */ - SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)}, + SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)}, #endif {} }; From 65f33396ab57f3346fb07ddee8e3aa616d13386c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:15 -0300 Subject: [PATCH 442/638] V4L/DVB (8817): gspca: LED and proble changes in sonixb. - turn the led of the cam off after plugging in the cam - move the probe code from open to config, so that if the probe fails we never register Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 735d4260f2f..64aae060a93 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -756,6 +756,11 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; int sif = 0; + const __u8 stop = 0x09; /* Disable stream turn of LED */ + + reg_r(gspca_dev, 0x00); + if (gspca_dev->usb_buf[0] != 0x10) + return -ENODEV; /* copy the webcam info from the device id */ sd->sensor = (id->driver_info >> 24) & 0xff; @@ -788,15 +793,15 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autogain = AUTOGAIN_DEF; sd->freq = FREQ_DEF; + /* Disable stream turn of LED */ + reg_w(gspca_dev, 0x01, &stop, 1); + return 0; } /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { - reg_r(gspca_dev, 0x00); - if (gspca_dev->usb_buf[0] != 0x10) - return -ENODEV; return 0; } From 1e89e2da48070da8ac221c37fea8fa82da127c34 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:15 -0300 Subject: [PATCH 443/638] V4L/DVB (8818): gspca: Reinitialize the device on resume. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e7e73ec7134..1767991c1f4 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1838,9 +1838,12 @@ int gspca_resume(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->frozen = 0; - if (!gspca_dev->streaming) - return 0; - return gspca_init_transfer(gspca_dev); + if (gspca_dev->users != 0) { + gspca_dev->sd_desc->open(gspca_dev); + if (gspca_dev->streaming) + return gspca_init_transfer(gspca_dev); + } + return 0; } EXPORT_SYMBOL(gspca_resume); #endif From 4202f71ca1e52d73cab14f3695fdef6b6f010a0b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:15 -0300 Subject: [PATCH 444/638] V4L/DVB (8819): gspca: Initialize the ov519 at open time and source cleanup. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 1142 +++++++++++++++-------------- 1 file changed, 596 insertions(+), 546 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index c132f8d2cf0..4062aed2413 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -63,11 +63,10 @@ struct sd { #define SEN_OV6630 2 #define SEN_OV7610 3 #define SEN_OV7620 4 -#define SEN_OV7630 5 -#define SEN_OV7640 6 -#define SEN_OV7670 7 -#define SEN_OV76BE 8 -#define SEN_OV8610 9 +#define SEN_OV7640 5 +#define SEN_OV7670 6 +#define SEN_OV76BE 7 +#define SEN_OV8610 8 }; @@ -293,6 +292,541 @@ static struct v4l2_pix_format sif_mode[] = { #define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ #define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */ +struct ov_regvals { + __u8 reg; + __u8 val; +}; +struct ov_i2c_regvals { + __u8 reg; + __u8 val; +}; + +static const struct ov_i2c_regvals norm_6x20[] = { + { 0x12, 0x80 }, /* reset */ + { 0x11, 0x01 }, + { 0x03, 0x60 }, + { 0x05, 0x7f }, /* For when autoadjust is off */ + { 0x07, 0xa8 }, + /* The ratio of 0x0c and 0x0d controls the white point */ + { 0x0c, 0x24 }, + { 0x0d, 0x24 }, + { 0x0f, 0x15 }, /* COMS */ + { 0x10, 0x75 }, /* AEC Exposure time */ + { 0x12, 0x24 }, /* Enable AGC */ + { 0x14, 0x04 }, + /* 0x16: 0x06 helps frame stability with moving objects */ + { 0x16, 0x06 }, +/* { 0x20, 0x30 }, * Aperture correction enable */ + { 0x26, 0xb2 }, /* BLC enable */ + /* 0x28: 0x05 Selects RGB format if RGB on */ + { 0x28, 0x05 }, + { 0x2a, 0x04 }, /* Disable framerate adjust */ +/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */ + { 0x2d, 0x99 }, + { 0x33, 0xa0 }, /* Color Processing Parameter */ + { 0x34, 0xd2 }, /* Max A/D range */ + { 0x38, 0x8b }, + { 0x39, 0x40 }, + + { 0x3c, 0x39 }, /* Enable AEC mode changing */ + { 0x3c, 0x3c }, /* Change AEC mode */ + { 0x3c, 0x24 }, /* Disable AEC mode changing */ + + { 0x3d, 0x80 }, + /* These next two registers (0x4a, 0x4b) are undocumented. + * They control the color balance */ + { 0x4a, 0x80 }, + { 0x4b, 0x80 }, + { 0x4d, 0xd2 }, /* This reduces noise a bit */ + { 0x4e, 0xc1 }, + { 0x4f, 0x04 }, +/* Do 50-53 have any effect? */ +/* Toggle 0x12[2] off and on here? */ +}; + +static const struct ov_i2c_regvals norm_6x30[] = { + { 0x12, 0x80 }, /* Reset */ + { 0x00, 0x1f }, /* Gain */ + { 0x01, 0x99 }, /* Blue gain */ + { 0x02, 0x7c }, /* Red gain */ + { 0x03, 0xc0 }, /* Saturation */ + { 0x05, 0x0a }, /* Contrast */ + { 0x06, 0x95 }, /* Brightness */ + { 0x07, 0x2d }, /* Sharpness */ + { 0x0c, 0x20 }, + { 0x0d, 0x20 }, + { 0x0e, 0x20 }, + { 0x0f, 0x05 }, + { 0x10, 0x9a }, + { 0x11, 0x00 }, /* Pixel clock = fastest */ + { 0x12, 0x24 }, /* Enable AGC and AWB */ + { 0x13, 0x21 }, + { 0x14, 0x80 }, + { 0x15, 0x01 }, + { 0x16, 0x03 }, + { 0x17, 0x38 }, + { 0x18, 0xea }, + { 0x19, 0x04 }, + { 0x1a, 0x93 }, + { 0x1b, 0x00 }, + { 0x1e, 0xc4 }, + { 0x1f, 0x04 }, + { 0x20, 0x20 }, + { 0x21, 0x10 }, + { 0x22, 0x88 }, + { 0x23, 0xc0 }, /* Crystal circuit power level */ + { 0x25, 0x9a }, /* Increase AEC black ratio */ + { 0x26, 0xb2 }, /* BLC enable */ + { 0x27, 0xa2 }, + { 0x28, 0x00 }, + { 0x29, 0x00 }, + { 0x2a, 0x84 }, /* 60 Hz power */ + { 0x2b, 0xa8 }, /* 60 Hz power */ + { 0x2c, 0xa0 }, + { 0x2d, 0x95 }, /* Enable auto-brightness */ + { 0x2e, 0x88 }, + { 0x33, 0x26 }, + { 0x34, 0x03 }, + { 0x36, 0x8f }, + { 0x37, 0x80 }, + { 0x38, 0x83 }, + { 0x39, 0x80 }, + { 0x3a, 0x0f }, + { 0x3b, 0x3c }, + { 0x3c, 0x1a }, + { 0x3d, 0x80 }, + { 0x3e, 0x80 }, + { 0x3f, 0x0e }, + { 0x40, 0x00 }, /* White bal */ + { 0x41, 0x00 }, /* White bal */ + { 0x42, 0x80 }, + { 0x43, 0x3f }, /* White bal */ + { 0x44, 0x80 }, + { 0x45, 0x20 }, + { 0x46, 0x20 }, + { 0x47, 0x80 }, + { 0x48, 0x7f }, + { 0x49, 0x00 }, + { 0x4a, 0x00 }, + { 0x4b, 0x80 }, + { 0x4c, 0xd0 }, + { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ + { 0x4e, 0x40 }, + { 0x4f, 0x07 }, /* UV avg., col. killer: max */ + { 0x50, 0xff }, + { 0x54, 0x23 }, /* Max AGC gain: 18dB */ + { 0x55, 0xff }, + { 0x56, 0x12 }, + { 0x57, 0x81 }, + { 0x58, 0x75 }, + { 0x59, 0x01 }, /* AGC dark current comp.: +1 */ + { 0x5a, 0x2c }, + { 0x5b, 0x0f }, /* AWB chrominance levels */ + { 0x5c, 0x10 }, + { 0x3d, 0x80 }, + { 0x27, 0xa6 }, + { 0x12, 0x20 }, /* Toggle AWB */ + { 0x12, 0x24 }, +}; + +/* Lawrence Glaister reports: + * + * Register 0x0f in the 7610 has the following effects: + * + * 0x85 (AEC method 1): Best overall, good contrast range + * 0x45 (AEC method 2): Very overexposed + * 0xa5 (spec sheet default): Ok, but the black level is + * shifted resulting in loss of contrast + * 0x05 (old driver setting): very overexposed, too much + * contrast + */ +static const struct ov_i2c_regvals norm_7610[] = { + { 0x10, 0xff }, + { 0x16, 0x06 }, + { 0x28, 0x24 }, + { 0x2b, 0xac }, + { 0x12, 0x00 }, + { 0x38, 0x81 }, + { 0x28, 0x24 }, /* 0c */ + { 0x0f, 0x85 }, /* lg's setting */ + { 0x15, 0x01 }, + { 0x20, 0x1c }, + { 0x23, 0x2a }, + { 0x24, 0x10 }, + { 0x25, 0x8a }, + { 0x26, 0xa2 }, + { 0x27, 0xc2 }, + { 0x2a, 0x04 }, + { 0x2c, 0xfe }, + { 0x2d, 0x93 }, + { 0x30, 0x71 }, + { 0x31, 0x60 }, + { 0x32, 0x26 }, + { 0x33, 0x20 }, + { 0x34, 0x48 }, + { 0x12, 0x24 }, + { 0x11, 0x01 }, + { 0x0c, 0x24 }, + { 0x0d, 0x24 }, +}; + +static const struct ov_i2c_regvals norm_7620[] = { + { 0x00, 0x00 }, /* gain */ + { 0x01, 0x80 }, /* blue gain */ + { 0x02, 0x80 }, /* red gain */ + { 0x03, 0xc0 }, /* OV7670_REG_VREF */ + { 0x06, 0x60 }, + { 0x07, 0x00 }, + { 0x0c, 0x24 }, + { 0x0c, 0x24 }, + { 0x0d, 0x24 }, + { 0x11, 0x01 }, + { 0x12, 0x24 }, + { 0x13, 0x01 }, + { 0x14, 0x84 }, + { 0x15, 0x01 }, + { 0x16, 0x03 }, + { 0x17, 0x2f }, + { 0x18, 0xcf }, + { 0x19, 0x06 }, + { 0x1a, 0xf5 }, + { 0x1b, 0x00 }, + { 0x20, 0x18 }, + { 0x21, 0x80 }, + { 0x22, 0x80 }, + { 0x23, 0x00 }, + { 0x26, 0xa2 }, + { 0x27, 0xea }, + { 0x28, 0x20 }, + { 0x29, 0x00 }, + { 0x2a, 0x10 }, + { 0x2b, 0x00 }, + { 0x2c, 0x88 }, + { 0x2d, 0x91 }, + { 0x2e, 0x80 }, + { 0x2f, 0x44 }, + { 0x60, 0x27 }, + { 0x61, 0x02 }, + { 0x62, 0x5f }, + { 0x63, 0xd5 }, + { 0x64, 0x57 }, + { 0x65, 0x83 }, + { 0x66, 0x55 }, + { 0x67, 0x92 }, + { 0x68, 0xcf }, + { 0x69, 0x76 }, + { 0x6a, 0x22 }, + { 0x6b, 0x00 }, + { 0x6c, 0x02 }, + { 0x6d, 0x44 }, + { 0x6e, 0x80 }, + { 0x6f, 0x1d }, + { 0x70, 0x8b }, + { 0x71, 0x00 }, + { 0x72, 0x14 }, + { 0x73, 0x54 }, + { 0x74, 0x00 }, + { 0x75, 0x8e }, + { 0x76, 0x00 }, + { 0x77, 0xff }, + { 0x78, 0x80 }, + { 0x79, 0x80 }, + { 0x7a, 0x80 }, + { 0x7b, 0xe2 }, + { 0x7c, 0x00 }, +}; + +/* 7640 and 7648. The defaults should be OK for most registers. */ +static const struct ov_i2c_regvals norm_7640[] = { + { 0x12, 0x80 }, + { 0x12, 0x14 }, +}; + +/* 7670. Defaults taken from OmniVision provided data, +* as provided by Jonathan Corbet of OLPC */ +static const struct ov_i2c_regvals norm_7670[] = { + { OV7670_REG_COM7, OV7670_COM7_RESET }, + { OV7670_REG_TSLB, 0x04 }, /* OV */ + { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */ + { OV7670_REG_CLKRC, 0x01 }, +/* + * Set the hardware window. These values from OV don't entirely + * make sense - hstop is less than hstart. But they work... + */ + { OV7670_REG_HSTART, 0x13 }, + { OV7670_REG_HSTOP, 0x01 }, + { OV7670_REG_HREF, 0xb6 }, + { OV7670_REG_VSTART, 0x02 }, + { OV7670_REG_VSTOP, 0x7a }, + { OV7670_REG_VREF, 0x0a }, + + { OV7670_REG_COM3, 0 }, + { OV7670_REG_COM14, 0 }, +/* Mystery scaling numbers */ + { 0x70, 0x3a }, + { 0x71, 0x35 }, + { 0x72, 0x11 }, + { 0x73, 0xf0 }, + { 0xa2, 0x02 }, +/* { OV7670_REG_COM10, 0x0 }, */ + +/* Gamma curve values */ + { 0x7a, 0x20 }, + { 0x7b, 0x10 }, + { 0x7c, 0x1e }, + { 0x7d, 0x35 }, + { 0x7e, 0x5a }, + { 0x7f, 0x69 }, + { 0x80, 0x76 }, + { 0x81, 0x80 }, + { 0x82, 0x88 }, + { 0x83, 0x8f }, + { 0x84, 0x96 }, + { 0x85, 0xa3 }, + { 0x86, 0xaf }, + { 0x87, 0xc4 }, + { 0x88, 0xd7 }, + { 0x89, 0xe8 }, + +/* AGC and AEC parameters. Note we start by disabling those features, + then turn them only after tweaking the values. */ + { OV7670_REG_COM8, OV7670_COM8_FASTAEC + | OV7670_COM8_AECSTEP + | OV7670_COM8_BFILT }, + { OV7670_REG_GAIN, 0 }, + { OV7670_REG_AECH, 0 }, + { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */ + { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ + { OV7670_REG_BD50MAX, 0x05 }, + { OV7670_REG_BD60MAX, 0x07 }, + { OV7670_REG_AEW, 0x95 }, + { OV7670_REG_AEB, 0x33 }, + { OV7670_REG_VPT, 0xe3 }, + { OV7670_REG_HAECC1, 0x78 }, + { OV7670_REG_HAECC2, 0x68 }, + { 0xa1, 0x03 }, /* magic */ + { OV7670_REG_HAECC3, 0xd8 }, + { OV7670_REG_HAECC4, 0xd8 }, + { OV7670_REG_HAECC5, 0xf0 }, + { OV7670_REG_HAECC6, 0x90 }, + { OV7670_REG_HAECC7, 0x94 }, + { OV7670_REG_COM8, OV7670_COM8_FASTAEC + | OV7670_COM8_AECSTEP + | OV7670_COM8_BFILT + | OV7670_COM8_AGC + | OV7670_COM8_AEC }, + +/* Almost all of these are magic "reserved" values. */ + { OV7670_REG_COM5, 0x61 }, + { OV7670_REG_COM6, 0x4b }, + { 0x16, 0x02 }, + { OV7670_REG_MVFP, 0x07 }, + { 0x21, 0x02 }, + { 0x22, 0x91 }, + { 0x29, 0x07 }, + { 0x33, 0x0b }, + { 0x35, 0x0b }, + { 0x37, 0x1d }, + { 0x38, 0x71 }, + { 0x39, 0x2a }, + { OV7670_REG_COM12, 0x78 }, + { 0x4d, 0x40 }, + { 0x4e, 0x20 }, + { OV7670_REG_GFIX, 0 }, + { 0x6b, 0x4a }, + { 0x74, 0x10 }, + { 0x8d, 0x4f }, + { 0x8e, 0 }, + { 0x8f, 0 }, + { 0x90, 0 }, + { 0x91, 0 }, + { 0x96, 0 }, + { 0x9a, 0 }, + { 0xb0, 0x84 }, + { 0xb1, 0x0c }, + { 0xb2, 0x0e }, + { 0xb3, 0x82 }, + { 0xb8, 0x0a }, + +/* More reserved magic, some of which tweaks white balance */ + { 0x43, 0x0a }, + { 0x44, 0xf0 }, + { 0x45, 0x34 }, + { 0x46, 0x58 }, + { 0x47, 0x28 }, + { 0x48, 0x3a }, + { 0x59, 0x88 }, + { 0x5a, 0x88 }, + { 0x5b, 0x44 }, + { 0x5c, 0x67 }, + { 0x5d, 0x49 }, + { 0x5e, 0x0e }, + { 0x6c, 0x0a }, + { 0x6d, 0x55 }, + { 0x6e, 0x11 }, + { 0x6f, 0x9f }, + /* "9e for advance AWB" */ + { 0x6a, 0x40 }, + { OV7670_REG_BLUE, 0x40 }, + { OV7670_REG_RED, 0x60 }, + { OV7670_REG_COM8, OV7670_COM8_FASTAEC + | OV7670_COM8_AECSTEP + | OV7670_COM8_BFILT + | OV7670_COM8_AGC + | OV7670_COM8_AEC + | OV7670_COM8_AWB }, + +/* Matrix coefficients */ + { 0x4f, 0x80 }, + { 0x50, 0x80 }, + { 0x51, 0 }, + { 0x52, 0x22 }, + { 0x53, 0x5e }, + { 0x54, 0x80 }, + { 0x58, 0x9e }, + + { OV7670_REG_COM16, OV7670_COM16_AWBGAIN }, + { OV7670_REG_EDGE, 0 }, + { 0x75, 0x05 }, + { 0x76, 0xe1 }, + { 0x4c, 0 }, + { 0x77, 0x01 }, + { OV7670_REG_COM13, OV7670_COM13_GAMMA + | OV7670_COM13_UVSAT + | 2}, /* was 3 */ + { 0x4b, 0x09 }, + { 0xc9, 0x60 }, + { OV7670_REG_COM16, 0x38 }, + { 0x56, 0x40 }, + + { 0x34, 0x11 }, + { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO }, + { 0xa4, 0x88 }, + { 0x96, 0 }, + { 0x97, 0x30 }, + { 0x98, 0x20 }, + { 0x99, 0x30 }, + { 0x9a, 0x84 }, + { 0x9b, 0x29 }, + { 0x9c, 0x03 }, + { 0x9d, 0x4c }, + { 0x9e, 0x3f }, + { 0x78, 0x04 }, + +/* Extra-weird stuff. Some sort of multiplexor register */ + { 0x79, 0x01 }, + { 0xc8, 0xf0 }, + { 0x79, 0x0f }, + { 0xc8, 0x00 }, + { 0x79, 0x10 }, + { 0xc8, 0x7e }, + { 0x79, 0x0a }, + { 0xc8, 0x80 }, + { 0x79, 0x0b }, + { 0xc8, 0x01 }, + { 0x79, 0x0c }, + { 0xc8, 0x0f }, + { 0x79, 0x0d }, + { 0xc8, 0x20 }, + { 0x79, 0x09 }, + { 0xc8, 0x80 }, + { 0x79, 0x02 }, + { 0xc8, 0xc0 }, + { 0x79, 0x03 }, + { 0xc8, 0x40 }, + { 0x79, 0x05 }, + { 0xc8, 0x30 }, + { 0x79, 0x26 }, +}; + +static const struct ov_i2c_regvals norm_8610[] = { + { 0x12, 0x80 }, + { 0x00, 0x00 }, + { 0x01, 0x80 }, + { 0x02, 0x80 }, + { 0x03, 0xc0 }, + { 0x04, 0x30 }, + { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */ + { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */ + { 0x0a, 0x86 }, + { 0x0b, 0xb0 }, + { 0x0c, 0x20 }, + { 0x0d, 0x20 }, + { 0x11, 0x01 }, + { 0x12, 0x25 }, + { 0x13, 0x01 }, + { 0x14, 0x04 }, + { 0x15, 0x01 }, /* Lin and Win think different about UV order */ + { 0x16, 0x03 }, + { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */ + { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */ + { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */ + { 0x1a, 0xf5 }, + { 0x1b, 0x00 }, + { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */ + { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */ + { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */ + { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */ + { 0x26, 0xa2 }, + { 0x27, 0xea }, + { 0x28, 0x00 }, + { 0x29, 0x00 }, + { 0x2a, 0x80 }, + { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */ + { 0x2c, 0xac }, + { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */ + { 0x2e, 0x80 }, + { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */ + { 0x4c, 0x00 }, + { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */ + { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */ + { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */ + { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */ + { 0x63, 0xff }, + { 0x64, 0x53 }, /* new windrv 090403 says 0x57, + * maybe thats wrong */ + { 0x65, 0x00 }, + { 0x66, 0x55 }, + { 0x67, 0xb0 }, + { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */ + { 0x69, 0x02 }, + { 0x6a, 0x22 }, + { 0x6b, 0x00 }, + { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but + * deleting bit7 colors the first images red */ + { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */ + { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */ + { 0x6f, 0x01 }, + { 0x70, 0x8b }, + { 0x71, 0x00 }, + { 0x72, 0x14 }, + { 0x73, 0x54 }, + { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */ + { 0x75, 0x0e }, + { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */ + { 0x77, 0xff }, + { 0x78, 0x80 }, + { 0x79, 0x80 }, + { 0x7a, 0x80 }, + { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */ + { 0x7c, 0x00 }, + { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */ + { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */ + { 0x7f, 0xfb }, + { 0x80, 0x28 }, + { 0x81, 0x00 }, + { 0x82, 0x23 }, + { 0x83, 0x0b }, + { 0x84, 0x00 }, + { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */ + { 0x86, 0xc9 }, + { 0x87, 0x00 }, + { 0x88, 0x00 }, + { 0x89, 0x01 }, + { 0x12, 0x20 }, + { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */ +}; + static unsigned char ov7670_abs_to_sm(unsigned char v) { if (v > 127) @@ -537,18 +1071,10 @@ static int ov51x_set_slave_ids(struct sd *sd, rc = reg_w(sd, R51x_I2C_W_SID, slave); if (rc < 0) return rc; + sd->primary_i2c_slave = slave; return reg_w(sd, R51x_I2C_R_SID, slave + 1); } -struct ov_regvals { - __u8 reg; - __u8 val; -}; -struct ov_i2c_regvals { - __u8 reg; - __u8 val; -}; - static int write_regvals(struct sd *sd, const struct ov_regvals *regvals, int n) @@ -591,101 +1117,9 @@ static int write_i2c_regvals(struct sd *sd, static int ov8xx0_configure(struct sd *sd) { int rc; - static const struct ov_i2c_regvals norm_8610[] = { - { 0x12, 0x80 }, - { 0x00, 0x00 }, - { 0x01, 0x80 }, - { 0x02, 0x80 }, - { 0x03, 0xc0 }, - { 0x04, 0x30 }, - { 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */ - { 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */ - { 0x0a, 0x86 }, - { 0x0b, 0xb0 }, - { 0x0c, 0x20 }, - { 0x0d, 0x20 }, - { 0x11, 0x01 }, - { 0x12, 0x25 }, - { 0x13, 0x01 }, - { 0x14, 0x04 }, - { 0x15, 0x01 }, /* Lin and Win think different about UV order */ - { 0x16, 0x03 }, - { 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */ - { 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */ - { 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */ - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */ - { 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */ - { 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */ - { 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */ - { 0x26, 0xa2 }, - { 0x27, 0xea }, - { 0x28, 0x00 }, - { 0x29, 0x00 }, - { 0x2a, 0x80 }, - { 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */ - { 0x2c, 0xac }, - { 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */ - { 0x2e, 0x80 }, - { 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */ - { 0x4c, 0x00 }, - { 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */ - { 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */ - { 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */ - { 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */ - { 0x63, 0xff }, - { 0x64, 0x53 }, /* new windrv 090403 says 0x57, - * maybe thats wrong */ - { 0x65, 0x00 }, - { 0x66, 0x55 }, - { 0x67, 0xb0 }, - { 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */ - { 0x69, 0x02 }, - { 0x6a, 0x22 }, - { 0x6b, 0x00 }, - { 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but - deleting bit7 colors the first images red */ - { 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */ - { 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */ - { 0x6f, 0x01 }, - { 0x70, 0x8b }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */ - { 0x75, 0x0e }, - { 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */ - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */ - { 0x7c, 0x00 }, - { 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */ - { 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */ - { 0x7f, 0xfb }, - { 0x80, 0x28 }, - { 0x81, 0x00 }, - { 0x82, 0x23 }, - { 0x83, 0x0b }, - { 0x84, 0x00 }, - { 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */ - { 0x86, 0xc9 }, - { 0x87, 0x00 }, - { 0x88, 0x00 }, - { 0x89, 0x01 }, - { 0x12, 0x20 }, - { 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */ - }; PDEBUG(D_PROBE, "starting ov8xx0 configuration"); - if (init_ov_sensor(sd) < 0) - PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID"); - else - PDEBUG(D_PROBE, "OV86x0 initialized"); - /* Detect sensor (sub)type */ rc = i2c_r(sd, OV7610_REG_COM_I); if (rc < 0) { @@ -698,9 +1132,6 @@ static int ov8xx0_configure(struct sd *sd) PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3); return -1; } - PDEBUG(D_PROBE, "Writing 8610 registers"); - if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610))) - return -1; /* Set sensor-specific vars */ /* sd->sif = 0; already done */ @@ -714,252 +1145,6 @@ static int ov7xx0_configure(struct sd *sd) { int rc, high, low; - /* Lawrence Glaister reports: - * - * Register 0x0f in the 7610 has the following effects: - * - * 0x85 (AEC method 1): Best overall, good contrast range - * 0x45 (AEC method 2): Very overexposed - * 0xa5 (spec sheet default): Ok, but the black level is - * shifted resulting in loss of contrast - * 0x05 (old driver setting): very overexposed, too much - * contrast - */ - static const struct ov_i2c_regvals norm_7610[] = { - { 0x10, 0xff }, - { 0x16, 0x06 }, - { 0x28, 0x24 }, - { 0x2b, 0xac }, - { 0x12, 0x00 }, - { 0x38, 0x81 }, - { 0x28, 0x24 }, /* 0c */ - { 0x0f, 0x85 }, /* lg's setting */ - { 0x15, 0x01 }, - { 0x20, 0x1c }, - { 0x23, 0x2a }, - { 0x24, 0x10 }, - { 0x25, 0x8a }, - { 0x26, 0xa2 }, - { 0x27, 0xc2 }, - { 0x2a, 0x04 }, - { 0x2c, 0xfe }, - { 0x2d, 0x93 }, - { 0x30, 0x71 }, - { 0x31, 0x60 }, - { 0x32, 0x26 }, - { 0x33, 0x20 }, - { 0x34, 0x48 }, - { 0x12, 0x24 }, - { 0x11, 0x01 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - }; - - static const struct ov_i2c_regvals norm_7620[] = { - { 0x00, 0x00 }, /* gain */ - { 0x01, 0x80 }, /* blue gain */ - { 0x02, 0x80 }, /* red gain */ - { 0x03, 0xc0 }, /* OV7670_REG_VREF */ - { 0x06, 0x60 }, - { 0x07, 0x00 }, - { 0x0c, 0x24 }, - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0x11, 0x01 }, - { 0x12, 0x24 }, - { 0x13, 0x01 }, - { 0x14, 0x84 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x2f }, - { 0x18, 0xcf }, - { 0x19, 0x06 }, - { 0x1a, 0xf5 }, - { 0x1b, 0x00 }, - { 0x20, 0x18 }, - { 0x21, 0x80 }, - { 0x22, 0x80 }, - { 0x23, 0x00 }, - { 0x26, 0xa2 }, - { 0x27, 0xea }, - { 0x28, 0x20 }, - { 0x29, 0x00 }, - { 0x2a, 0x10 }, - { 0x2b, 0x00 }, - { 0x2c, 0x88 }, - { 0x2d, 0x91 }, - { 0x2e, 0x80 }, - { 0x2f, 0x44 }, - { 0x60, 0x27 }, - { 0x61, 0x02 }, - { 0x62, 0x5f }, - { 0x63, 0xd5 }, - { 0x64, 0x57 }, - { 0x65, 0x83 }, - { 0x66, 0x55 }, - { 0x67, 0x92 }, - { 0x68, 0xcf }, - { 0x69, 0x76 }, - { 0x6a, 0x22 }, - { 0x6b, 0x00 }, - { 0x6c, 0x02 }, - { 0x6d, 0x44 }, - { 0x6e, 0x80 }, - { 0x6f, 0x1d }, - { 0x70, 0x8b }, - { 0x71, 0x00 }, - { 0x72, 0x14 }, - { 0x73, 0x54 }, - { 0x74, 0x00 }, - { 0x75, 0x8e }, - { 0x76, 0x00 }, - { 0x77, 0xff }, - { 0x78, 0x80 }, - { 0x79, 0x80 }, - { 0x7a, 0x80 }, - { 0x7b, 0xe2 }, - { 0x7c, 0x00 }, - }; - - /* 7640 and 7648. The defaults should be OK for most registers. */ - static const struct ov_i2c_regvals norm_7640[] = { - { 0x12, 0x80 }, - { 0x12, 0x14 }, - }; - - /* 7670. Defaults taken from OmniVision provided data, - * as provided by Jonathan Corbet of OLPC */ - static const struct ov_i2c_regvals norm_7670[] = { - { OV7670_REG_COM7, OV7670_COM7_RESET }, - { OV7670_REG_TSLB, 0x04 }, /* OV */ - { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */ - { OV7670_REG_CLKRC, 0x01 }, - /* - * Set the hardware window. These values from OV don't entirely - * make sense - hstop is less than hstart. But they work... - */ - { OV7670_REG_HSTART, 0x13 }, { OV7670_REG_HSTOP, 0x01 }, - { OV7670_REG_HREF, 0xb6 }, { OV7670_REG_VSTART, 0x02 }, - { OV7670_REG_VSTOP, 0x7a }, { OV7670_REG_VREF, 0x0a }, - - { OV7670_REG_COM3, 0 }, { OV7670_REG_COM14, 0 }, - /* Mystery scaling numbers */ - { 0x70, 0x3a }, { 0x71, 0x35 }, - { 0x72, 0x11 }, { 0x73, 0xf0 }, - { 0xa2, 0x02 }, -/* { OV7670_REG_COM10, 0x0 }, */ - - /* Gamma curve values */ - { 0x7a, 0x20 }, - { 0x7b, 0x10 }, - { 0x7c, 0x1e }, - { 0x7d, 0x35 }, - { 0x7e, 0x5a }, { 0x7f, 0x69 }, - { 0x80, 0x76 }, { 0x81, 0x80 }, - { 0x82, 0x88 }, { 0x83, 0x8f }, - { 0x84, 0x96 }, { 0x85, 0xa3 }, - { 0x86, 0xaf }, { 0x87, 0xc4 }, - { 0x88, 0xd7 }, { 0x89, 0xe8 }, - - /* AGC and AEC parameters. Note we start by disabling those features, - then turn them only after tweaking the values. */ - { OV7670_REG_COM8, OV7670_COM8_FASTAEC - | OV7670_COM8_AECSTEP - | OV7670_COM8_BFILT }, - { OV7670_REG_GAIN, 0 }, { OV7670_REG_AECH, 0 }, - { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */ - { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ - { OV7670_REG_BD50MAX, 0x05 }, { OV7670_REG_BD60MAX, 0x07 }, - { OV7670_REG_AEW, 0x95 }, { OV7670_REG_AEB, 0x33 }, - { OV7670_REG_VPT, 0xe3 }, { OV7670_REG_HAECC1, 0x78 }, - { OV7670_REG_HAECC2, 0x68 }, - { 0xa1, 0x03 }, /* magic */ - { OV7670_REG_HAECC3, 0xd8 }, { OV7670_REG_HAECC4, 0xd8 }, - { OV7670_REG_HAECC5, 0xf0 }, { OV7670_REG_HAECC6, 0x90 }, - { OV7670_REG_HAECC7, 0x94 }, - { OV7670_REG_COM8, OV7670_COM8_FASTAEC - | OV7670_COM8_AECSTEP - | OV7670_COM8_BFILT - | OV7670_COM8_AGC - | OV7670_COM8_AEC }, - - /* Almost all of these are magic "reserved" values. */ - { OV7670_REG_COM5, 0x61 }, { OV7670_REG_COM6, 0x4b }, - { 0x16, 0x02 }, - { OV7670_REG_MVFP, 0x07 }, - { 0x21, 0x02 }, { 0x22, 0x91 }, - { 0x29, 0x07 }, { 0x33, 0x0b }, - { 0x35, 0x0b }, { 0x37, 0x1d }, - { 0x38, 0x71 }, { 0x39, 0x2a }, - { OV7670_REG_COM12, 0x78 }, { 0x4d, 0x40 }, - { 0x4e, 0x20 }, { OV7670_REG_GFIX, 0 }, - { 0x6b, 0x4a }, { 0x74, 0x10 }, - { 0x8d, 0x4f }, { 0x8e, 0 }, - { 0x8f, 0 }, { 0x90, 0 }, - { 0x91, 0 }, { 0x96, 0 }, - { 0x9a, 0 }, { 0xb0, 0x84 }, - { 0xb1, 0x0c }, { 0xb2, 0x0e }, - { 0xb3, 0x82 }, { 0xb8, 0x0a }, - - /* More reserved magic, some of which tweaks white balance */ - { 0x43, 0x0a }, { 0x44, 0xf0 }, - { 0x45, 0x34 }, { 0x46, 0x58 }, - { 0x47, 0x28 }, { 0x48, 0x3a }, - { 0x59, 0x88 }, { 0x5a, 0x88 }, - { 0x5b, 0x44 }, { 0x5c, 0x67 }, - { 0x5d, 0x49 }, { 0x5e, 0x0e }, - { 0x6c, 0x0a }, { 0x6d, 0x55 }, - { 0x6e, 0x11 }, { 0x6f, 0x9f }, - /* "9e for advance AWB" */ - { 0x6a, 0x40 }, { OV7670_REG_BLUE, 0x40 }, - { OV7670_REG_RED, 0x60 }, - { OV7670_REG_COM8, OV7670_COM8_FASTAEC - | OV7670_COM8_AECSTEP - | OV7670_COM8_BFILT - | OV7670_COM8_AGC - | OV7670_COM8_AEC - | OV7670_COM8_AWB }, - - /* Matrix coefficients */ - { 0x4f, 0x80 }, { 0x50, 0x80 }, - { 0x51, 0 }, { 0x52, 0x22 }, - { 0x53, 0x5e }, { 0x54, 0x80 }, - { 0x58, 0x9e }, - - { OV7670_REG_COM16, OV7670_COM16_AWBGAIN }, - { OV7670_REG_EDGE, 0 }, - { 0x75, 0x05 }, { 0x76, 0xe1 }, - { 0x4c, 0 }, { 0x77, 0x01 }, - { OV7670_REG_COM13, OV7670_COM13_GAMMA - | OV7670_COM13_UVSAT - | 2}, /* was 3 */ - { 0x4b, 0x09 }, - { 0xc9, 0x60 }, { OV7670_REG_COM16, 0x38 }, - { 0x56, 0x40 }, - - { 0x34, 0x11 }, - { OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO }, - { 0xa4, 0x88 }, { 0x96, 0 }, - { 0x97, 0x30 }, { 0x98, 0x20 }, - { 0x99, 0x30 }, { 0x9a, 0x84 }, - { 0x9b, 0x29 }, { 0x9c, 0x03 }, - { 0x9d, 0x4c }, { 0x9e, 0x3f }, - { 0x78, 0x04 }, - - /* Extra-weird stuff. Some sort of multiplexor register */ - { 0x79, 0x01 }, { 0xc8, 0xf0 }, - { 0x79, 0x0f }, { 0xc8, 0x00 }, - { 0x79, 0x10 }, { 0xc8, 0x7e }, - { 0x79, 0x0a }, { 0xc8, 0x80 }, - { 0x79, 0x0b }, { 0xc8, 0x01 }, - { 0x79, 0x0c }, { 0xc8, 0x0f }, - { 0x79, 0x0d }, { 0xc8, 0x20 }, - { 0x79, 0x09 }, { 0xc8, 0x80 }, - { 0x79, 0x02 }, { 0xc8, 0xc0 }, - { 0x79, 0x03 }, { 0xc8, 0x40 }, - { 0x79, 0x05 }, { 0xc8, 0x30 }, - { 0x79, 0x26 }, - }; PDEBUG(D_PROBE, "starting OV7xx0 configuration"); @@ -1011,8 +1196,9 @@ static int ov7xx0_configure(struct sd *sd) switch (low) { case 0x30: PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635"); - sd->sensor = SEN_OV7630; - break; + PDEBUG(D_ERR, + "7630 is not supported by this driver"); + return -1; case 0x40: PDEBUG(D_PROBE, "Sensor is an OV7645"); sd->sensor = SEN_OV7640; /* FIXME */ @@ -1038,32 +1224,6 @@ static int ov7xx0_configure(struct sd *sd) return -1; } - switch (sd->sensor) { - case SEN_OV7620: - PDEBUG(D_PROBE, "Writing 7620 registers"); - if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) - return -1; - break; - case SEN_OV7630: - PDEBUG(D_ERR, "7630 is not supported by this driver version"); - return -1; - case SEN_OV7640: - PDEBUG(D_PROBE, "Writing 7640 registers"); - if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640))) - return -1; - break; - case SEN_OV7670: - PDEBUG(D_PROBE, "Writing 7670 registers"); - if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670))) - return -1; - break; - default: - PDEBUG(D_PROBE, "Writing 7610 registers"); - if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) - return -1; - break; - } - /* Set sensor-specific vars */ /* sd->sif = 0; already done */ return 0; @@ -1073,141 +1233,7 @@ static int ov7xx0_configure(struct sd *sd) static int ov6xx0_configure(struct sd *sd) { int rc; - static const struct ov_i2c_regvals norm_6x20[] = { - { 0x12, 0x80 }, /* reset */ - { 0x11, 0x01 }, - { 0x03, 0x60 }, - { 0x05, 0x7f }, /* For when autoadjust is off */ - { 0x07, 0xa8 }, - /* The ratio of 0x0c and 0x0d controls the white point */ - { 0x0c, 0x24 }, - { 0x0d, 0x24 }, - { 0x0f, 0x15 }, /* COMS */ - { 0x10, 0x75 }, /* AEC Exposure time */ - { 0x12, 0x24 }, /* Enable AGC */ - { 0x14, 0x04 }, - /* 0x16: 0x06 helps frame stability with moving objects */ - { 0x16, 0x06 }, -/* { 0x20, 0x30 }, * Aperture correction enable */ - { 0x26, 0xb2 }, /* BLC enable */ - /* 0x28: 0x05 Selects RGB format if RGB on */ - { 0x28, 0x05 }, - { 0x2a, 0x04 }, /* Disable framerate adjust */ -/* { 0x2b, 0xac }, * Framerate; Set 2a[7] first */ - { 0x2d, 0x99 }, - { 0x33, 0xa0 }, /* Color Processing Parameter */ - { 0x34, 0xd2 }, /* Max A/D range */ - { 0x38, 0x8b }, - { 0x39, 0x40 }, - - { 0x3c, 0x39 }, /* Enable AEC mode changing */ - { 0x3c, 0x3c }, /* Change AEC mode */ - { 0x3c, 0x24 }, /* Disable AEC mode changing */ - - { 0x3d, 0x80 }, - /* These next two registers (0x4a, 0x4b) are undocumented. - * They control the color balance */ - { 0x4a, 0x80 }, - { 0x4b, 0x80 }, - { 0x4d, 0xd2 }, /* This reduces noise a bit */ - { 0x4e, 0xc1 }, - { 0x4f, 0x04 }, -/* Do 50-53 have any effect? */ -/* Toggle 0x12[2] off and on here? */ - }; - - static const struct ov_i2c_regvals norm_6x30[] = { - { 0x12, 0x80 }, /* Reset */ - { 0x00, 0x1f }, /* Gain */ - { 0x01, 0x99 }, /* Blue gain */ - { 0x02, 0x7c }, /* Red gain */ - { 0x03, 0xc0 }, /* Saturation */ - { 0x05, 0x0a }, /* Contrast */ - { 0x06, 0x95 }, /* Brightness */ - { 0x07, 0x2d }, /* Sharpness */ - { 0x0c, 0x20 }, - { 0x0d, 0x20 }, - { 0x0e, 0x20 }, - { 0x0f, 0x05 }, - { 0x10, 0x9a }, - { 0x11, 0x00 }, /* Pixel clock = fastest */ - { 0x12, 0x24 }, /* Enable AGC and AWB */ - { 0x13, 0x21 }, - { 0x14, 0x80 }, - { 0x15, 0x01 }, - { 0x16, 0x03 }, - { 0x17, 0x38 }, - { 0x18, 0xea }, - { 0x19, 0x04 }, - { 0x1a, 0x93 }, - { 0x1b, 0x00 }, - { 0x1e, 0xc4 }, - { 0x1f, 0x04 }, - { 0x20, 0x20 }, - { 0x21, 0x10 }, - { 0x22, 0x88 }, - { 0x23, 0xc0 }, /* Crystal circuit power level */ - { 0x25, 0x9a }, /* Increase AEC black ratio */ - { 0x26, 0xb2 }, /* BLC enable */ - { 0x27, 0xa2 }, - { 0x28, 0x00 }, - { 0x29, 0x00 }, - { 0x2a, 0x84 }, /* 60 Hz power */ - { 0x2b, 0xa8 }, /* 60 Hz power */ - { 0x2c, 0xa0 }, - { 0x2d, 0x95 }, /* Enable auto-brightness */ - { 0x2e, 0x88 }, - { 0x33, 0x26 }, - { 0x34, 0x03 }, - { 0x36, 0x8f }, - { 0x37, 0x80 }, - { 0x38, 0x83 }, - { 0x39, 0x80 }, - { 0x3a, 0x0f }, - { 0x3b, 0x3c }, - { 0x3c, 0x1a }, - { 0x3d, 0x80 }, - { 0x3e, 0x80 }, - { 0x3f, 0x0e }, - { 0x40, 0x00 }, /* White bal */ - { 0x41, 0x00 }, /* White bal */ - { 0x42, 0x80 }, - { 0x43, 0x3f }, /* White bal */ - { 0x44, 0x80 }, - { 0x45, 0x20 }, - { 0x46, 0x20 }, - { 0x47, 0x80 }, - { 0x48, 0x7f }, - { 0x49, 0x00 }, - { 0x4a, 0x00 }, - { 0x4b, 0x80 }, - { 0x4c, 0xd0 }, - { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */ - { 0x4e, 0x40 }, - { 0x4f, 0x07 }, /* UV avg., col. killer: max */ - { 0x50, 0xff }, - { 0x54, 0x23 }, /* Max AGC gain: 18dB */ - { 0x55, 0xff }, - { 0x56, 0x12 }, - { 0x57, 0x81 }, - { 0x58, 0x75 }, - { 0x59, 0x01 }, /* AGC dark current comp.: +1 */ - { 0x5a, 0x2c }, - { 0x5b, 0x0f }, /* AWB chrominance levels */ - { 0x5c, 0x10 }, - { 0x3d, 0x80 }, - { 0x27, 0xa6 }, - { 0x12, 0x20 }, /* Toggle AWB */ - { 0x12, 0x24 }, - }; - - PDEBUG(D_PROBE, "starting sensor configuration"); - - if (init_ov_sensor(sd) < 0) { - PDEBUG(D_ERR, "Failed to read sensor ID."); - return -1; - } - PDEBUG(D_PROBE, "OV6xx0 sensor detected"); + PDEBUG(D_PROBE, "starting OV6xx0 configuration"); /* Detect sensor (sub)type */ rc = i2c_r(sd, OV7610_REG_COM_I); @@ -1251,15 +1277,6 @@ static int ov6xx0_configure(struct sd *sd) /* Set sensor-specific vars */ sd->sif = 1; - if (sd->sensor == SEN_OV6620) { - PDEBUG(D_PROBE, "Writing 6x20 registers"); - if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20))) - return -1; - } else { - PDEBUG(D_PROBE, "Writing 6x30 registers"); - if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) - return -1; - } return 0; } @@ -1298,22 +1315,31 @@ static int sd_config(struct gspca_dev *gspca_dev, ov51x_led_control(sd, 0); /* turn LED off */ /* Test for 76xx */ - sd->primary_i2c_slave = OV7xx0_SID; if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0) goto error; /* The OV519 must be more aggressive about sensor detection since * I2C write will never fail if the sensor is not present. We have * to try to initialize the sensor to detect its presence */ - if (init_ov_sensor(sd) < 0) { + if (init_ov_sensor(sd) >= 0) { + if (ov7xx0_configure(sd) < 0) { + PDEBUG(D_ERR, "Failed to configure OV7xx0"); + goto error; + } + } else { + /* Test for 6xx0 */ - sd->primary_i2c_slave = OV6xx0_SID; if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0) goto error; - if (init_ov_sensor(sd) < 0) { + if (init_ov_sensor(sd) >= 0) { + if (ov6xx0_configure(sd) < 0) { + PDEBUG(D_ERR, "Failed to configure OV6xx0"); + goto error; + } + } else { + /* Test for 8xx0 */ - sd->primary_i2c_slave = OV8xx0_SID; if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0) goto error; @@ -1321,24 +1347,13 @@ static int sd_config(struct gspca_dev *gspca_dev, PDEBUG(D_ERR, "Can't determine sensor slave IDs"); goto error; - } else { - if (ov8xx0_configure(sd) < 0) { - PDEBUG(D_ERR, - "Failed to configure OV8xx0 sensor"); - goto error; - } } - } else { - if (ov6xx0_configure(sd) < 0) { - PDEBUG(D_ERR, "Failed to configure OV6xx0"); + if (ov8xx0_configure(sd) < 0) { + PDEBUG(D_ERR, + "Failed to configure OV8xx0 sensor"); goto error; } } - } else { - if (ov7xx0_configure(sd) < 0) { - PDEBUG(D_ERR, "Failed to configure OV7xx0"); - goto error; - } } cam = &gspca_dev->cam; @@ -1364,6 +1379,41 @@ error: /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + /* initialize the sensor */ + switch (sd->sensor) { + case SEN_OV6620: + if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20))) + return -EIO; + break; + case SEN_OV6630: + if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) + return -EIO; + break; + default: +/* case SEN_OV7610: */ +/* case SEN_OV76BE: */ + if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) + return -EIO; + break; + case SEN_OV7620: + if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) + return -EIO; + break; + case SEN_OV7640: + if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640))) + return -EIO; + break; + case SEN_OV7670: + if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670))) + return -EIO; + break; + case SEN_OV8610: + if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610))) + return -EIO; + break; + } return 0; } From 66e4124f41808b50f6e1b6771621d6c7bf1c34a6 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:16 -0300 Subject: [PATCH 445/638] V4L/DVB (8820): gspca: Change initialization and gamma of zc3xx - pas106. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac207.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 620c9631629..e6b5c8a5b5d 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -131,7 +131,8 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 1, .step = 1, - .default_value = 1, +#define AUTOGAIN_DEF 1 + .default_value = AUTOGAIN_DEF, .flags = 0, }, .set = sd_setautogain, @@ -256,13 +257,6 @@ static int sd_config(struct gspca_dev *gspca_dev, return -ENODEV; } - pac207_write_reg(gspca_dev, 0x41, 0x00); - /* Bit_0=Image Format, - * Bit_1=LED, - * Bit_2=Compression test mode enable */ - pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ - pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */ - PDEBUG(D_PROBE, "Pixart PAC207BCA Image Processor and Control Chip detected" " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct); @@ -274,6 +268,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = PAC207_BRIGHTNESS_DEFAULT; sd->exposure = PAC207_EXPOSURE_DEFAULT; sd->gain = PAC207_GAIN_DEFAULT; + sd->autogain = AUTOGAIN_DEF; return 0; } @@ -281,9 +276,13 @@ static int sd_config(struct gspca_dev *gspca_dev, /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; + pac207_write_reg(gspca_dev, 0x41, 0x00); + /* Bit_0=Image Format, + * Bit_1=LED, + * Bit_2=Compression test mode enable */ + pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ + pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */ - sd->autogain = 1; return 0; } From 012d6b029ec17f45374303bbdccd0bc206725751 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:16 -0300 Subject: [PATCH 446/638] V4L/DVB (8822): gspca: Change some subdriver functions for suspend/resume. - new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 16 ++-------- drivers/media/video/gspca/etoms.c | 16 ++-------- drivers/media/video/gspca/gspca.c | 45 +++++++++++------------------ drivers/media/video/gspca/gspca.h | 9 +++--- drivers/media/video/gspca/mars.c | 16 ++-------- drivers/media/video/gspca/ov519.c | 16 ++-------- drivers/media/video/gspca/pac207.c | 17 ++--------- drivers/media/video/gspca/pac7311.c | 12 ++------ drivers/media/video/gspca/sonixb.c | 16 ++-------- drivers/media/video/gspca/sonixj.c | 16 ++-------- drivers/media/video/gspca/spca500.c | 16 ++-------- drivers/media/video/gspca/spca501.c | 12 ++------ drivers/media/video/gspca/spca505.c | 12 ++------ drivers/media/video/gspca/spca506.c | 16 ++-------- drivers/media/video/gspca/spca508.c | 17 ++--------- drivers/media/video/gspca/spca561.c | 19 ++++-------- drivers/media/video/gspca/stk014.c | 16 ++-------- drivers/media/video/gspca/sunplus.c | 16 ++-------- drivers/media/video/gspca/t613.c | 31 +++++--------------- drivers/media/video/gspca/tv8532.c | 16 ++-------- drivers/media/video/gspca/vc032x.c | 20 ++----------- drivers/media/video/gspca/zc3xx.c | 17 ++--------- 22 files changed, 89 insertions(+), 298 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 739ef557c43..3db5c1e3283 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -826,8 +826,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { cx11646_init1(gspca_dev); cx11646_initsize(gspca_dev); @@ -845,10 +845,6 @@ static void sd_start(struct gspca_dev *gspca_dev) cx11646_jpeg(gspca_dev); } -static void sd_stopN(struct gspca_dev *gspca_dev) -{ -} - static void sd_stop0(struct gspca_dev *gspca_dev) { int retry = 50; @@ -871,10 +867,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev, 0x00fc, 0xe0); } -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -998,11 +990,9 @@ static struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, - .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index e5a9eee673a..c03b1f45de1 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -676,8 +676,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -711,14 +711,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) et_video(gspca_dev, 0); /* video off */ } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static __u8 Et_getgainG(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -895,11 +887,9 @@ static struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, }; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 1767991c1f4..fe096e76e5c 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -558,10 +558,12 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev) gspca_dev->streaming = 0; atomic_set(&gspca_dev->nevent, 0); if (gspca_dev->present) { - gspca_dev->sd_desc->stopN(gspca_dev); + if (gspca_dev->sd_desc->stopN) + gspca_dev->sd_desc->stopN(gspca_dev); destroy_urbs(gspca_dev); gspca_set_alt0(gspca_dev); - gspca_dev->sd_desc->stop0(gspca_dev); + if (gspca_dev->sd_desc->stop0) + gspca_dev->sd_desc->stop0(gspca_dev); PDEBUG(D_STREAM, "stream off OK"); } } @@ -770,19 +772,7 @@ static int dev_open(struct inode *inode, struct file *file) goto out; } - /* if not done yet, initialize the sensor */ - if (gspca_dev->users == 0) { - if (mutex_lock_interruptible(&gspca_dev->usb_lock)) { - ret = -ERESTARTSYS; - goto out; - } - ret = gspca_dev->sd_desc->open(gspca_dev); - mutex_unlock(&gspca_dev->usb_lock); - if (ret != 0) { - PDEBUG(D_ERR|D_CONF, "init device failed %d", ret); - goto out; - } - } else if (gspca_dev->users > 4) { /* (arbitrary value) */ + if (gspca_dev->users > 4) { /* (arbitrary value) */ ret = -EBUSY; goto out; } @@ -795,6 +785,7 @@ static int dev_open(struct inode *inode, struct file *file) else gspca_dev->vdev.debug &= ~3; #endif + ret = 0; out: mutex_unlock(&gspca_dev->queue_lock); if (ret != 0) @@ -815,11 +806,6 @@ static int dev_close(struct inode *inode, struct file *file) /* if the file did the capture, free the streaming resources */ if (gspca_dev->capt_file == file) { - mutex_lock(&gspca_dev->usb_lock); - if (gspca_dev->streaming) - gspca_stream_off(gspca_dev); - gspca_dev->sd_desc->close(gspca_dev); - mutex_unlock(&gspca_dev->usb_lock); frame_free(gspca_dev); gspca_dev->capt_file = NULL; gspca_dev->memory = GSPCA_MEMORY_NO; @@ -1747,8 +1733,11 @@ int gspca_dev_probe(struct usb_interface *intf, /* gspca_dev->users = 0; (done by kzalloc) */ gspca_dev->nbufread = 2; - /* configure the subdriver */ + /* configure the subdriver and initialize the USB device */ ret = gspca_dev->sd_desc->config(gspca_dev, id); + if (ret < 0) + goto out; + ret = gspca_dev->sd_desc->init(gspca_dev); if (ret < 0) goto out; ret = gspca_set_alt0(gspca_dev); @@ -1825,10 +1814,12 @@ int gspca_suspend(struct usb_interface *intf, pm_message_t message) if (!gspca_dev->streaming) return 0; gspca_dev->frozen = 1; /* avoid urb error messages */ - gspca_dev->sd_desc->stopN(gspca_dev); + if (gspca_dev->sd_desc->stopN) + gspca_dev->sd_desc->stopN(gspca_dev); destroy_urbs(gspca_dev); gspca_set_alt0(gspca_dev); - gspca_dev->sd_desc->stop0(gspca_dev); + if (gspca_dev->sd_desc->stop0) + gspca_dev->sd_desc->stop0(gspca_dev); return 0; } EXPORT_SYMBOL(gspca_suspend); @@ -1838,11 +1829,9 @@ int gspca_resume(struct usb_interface *intf) struct gspca_dev *gspca_dev = usb_get_intfdata(intf); gspca_dev->frozen = 0; - if (gspca_dev->users != 0) { - gspca_dev->sd_desc->open(gspca_dev); - if (gspca_dev->streaming) - return gspca_init_transfer(gspca_dev); - } + gspca_dev->sd_desc->init(gspca_dev); + if (gspca_dev->streaming) + return gspca_init_transfer(gspca_dev); return 0; } EXPORT_SYMBOL(gspca_resume); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index a804ef18b8d..7c2f44b2397 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -90,15 +90,14 @@ struct sd_desc { /* controls */ const struct ctrl *ctrls; int nctrls; -/* operations */ +/* mandatory operations */ cam_cf_op config; /* called on probe */ - cam_op open; /* called on open */ + cam_op init; /* called on probe and resume */ cam_v_op start; /* called on stream on */ - cam_v_op stopN; /* called on stream off - main alt */ - cam_v_op stop0; /* called on stream off - alt 0 */ - cam_v_op close; /* called on close */ cam_pkt_op pkt_scan; /* optional operations */ + cam_v_op stopN; /* called on stream off - main alt */ + cam_v_op stop0; /* called on stream off - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ cam_jpg_op get_jcomp; cam_jpg_op set_jcomp; diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index d7e20957818..281475913a6 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -144,8 +144,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { return 0; } @@ -358,14 +358,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) PDEBUG(D_ERR, "Camera Stop failed"); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -411,11 +403,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 4062aed2413..19378dde27c 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -1376,8 +1376,8 @@ error: return -EBUSY; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1877,14 +1877,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control((struct sd *) gspca_dev, 0); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -2141,11 +2133,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index e6b5c8a5b5d..a15bccad947 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -273,8 +273,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { pac207_write_reg(gspca_dev, 0x41, 0x00); /* Bit_0=Image Format, @@ -338,15 +338,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -532,11 +523,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .dq_callback = pac207_do_auto_gain, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 69d610062d0..e22ca610334 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -590,8 +590,8 @@ static void sethvflip(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x11, 0x01); } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { return 0; } @@ -691,11 +691,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } } -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void do_autogain(struct gspca_dev *gspca_dev) { } @@ -902,11 +897,10 @@ static struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, }; diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 64aae060a93..044a9ec58db 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -799,8 +799,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { return 0; } @@ -963,14 +963,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x01, &ByteSend, 1); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ unsigned char *data, /* isoc packet */ @@ -1162,11 +1154,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, .dq_callback = do_autogain, diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index e657b8ba6db..5380b4323a7 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -948,8 +948,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; /* const __u8 *sn9c1xx; */ @@ -1353,14 +1353,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0xf1, 0x00); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -1548,11 +1540,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, }; diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 5a20385fb17..6e733901fcc 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -645,8 +645,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -880,14 +880,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) gspca_dev->usb_buf[0]); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1051,11 +1043,9 @@ static struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index 525f1b3400e..e9eb59bae4f 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -1953,8 +1953,8 @@ error: return -EINVAL; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -2022,11 +2022,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) { reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00); } @@ -2120,11 +2115,10 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index 8f00558c2f5..f601daf19eb 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -655,8 +655,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int ret; @@ -742,11 +742,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) { /* This maybe reset or power control */ reg_write(gspca_dev->dev, 0x03, 0x03, 0x20); @@ -825,11 +820,10 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index ae772488cf7..195dce96ef0 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -313,8 +313,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; @@ -560,14 +560,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(dev, 0x03, 0x00, 0x0003); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -740,11 +732,9 @@ static struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 7b38c4e70fd..281ce02103a 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1521,8 +1521,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; /* success */ } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { /* write_vector(gspca_dev, spca508_open_data); */ return 0; @@ -1554,15 +1554,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, 0x8112, 0x20); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1633,11 +1624,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index b6a013f1dec..2ca509daf0b 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -560,14 +560,14 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open_12a(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init_12a(struct gspca_dev *gspca_dev) { PDEBUG(D_STREAM, "Chip revision: 012a"); init_161rev12A(gspca_dev); return 0; } -static int sd_open_72a(struct gspca_dev *gspca_dev) +static int sd_init_72a(struct gspca_dev *gspca_dev) { PDEBUG(D_STREAM, "Chip revision: 072a"); write_vector(gspca_dev, spca561_init_data); @@ -733,12 +733,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8118, 0x29); reg_w_val(gspca_dev->dev, 0x8114, 0x08); } -} - -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ - reg_w_val(gspca_dev->dev, 0x8114, 0); +/* reg_w_val(gspca_dev->dev, 0x8114, 0); */ } static void do_autogain(struct gspca_dev *gspca_dev) @@ -1121,11 +1116,10 @@ static const struct sd_desc sd_desc_12a = { .ctrls = sd_ctrls_12a, .nctrls = ARRAY_SIZE(sd_ctrls_12a), .config = sd_config, - .open = sd_open_12a, + .init = sd_init_12a, .start = sd_start_12a, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, /* .dq_callback = do_autogain, * fixme */ }; @@ -1134,11 +1128,10 @@ static const struct sd_desc sd_desc_72a = { .ctrls = sd_ctrls_72a, .nctrls = ARRAY_SIZE(sd_ctrls_72a), .config = sd_config, - .open = sd_open_72a, + .init = sd_init_72a, .start = sd_start_72a, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .dq_callback = do_autogain, }; diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 387a8cf2b3b..2f2de429e27 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -306,8 +306,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { int ret; @@ -398,14 +398,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) PDEBUG(D_STREAM, "camera stopped"); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -535,11 +527,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index c935384fc23..bddf73360c2 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -848,8 +848,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct usb_device *dev = gspca_dev->dev; @@ -1069,14 +1069,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1369,11 +1361,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 962c1df5829..81b175e15ca 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -552,6 +552,13 @@ static int init_default_parameters(struct gspca_dev *gspca_dev) return 0; } +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) +{ + init_default_parameters(gspca_dev); + return 0; +} + static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -893,18 +900,6 @@ static void sd_start(struct gspca_dev *gspca_dev) setcolors(gspca_dev); } -static void sd_stopN(struct gspca_dev *gspca_dev) -{ -} - -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -972,24 +967,14 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, return -EINVAL; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) -{ - init_default_parameters(gspca_dev); - return 0; -} - /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, - .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index d2273624a91..084af05302a 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -331,8 +331,8 @@ static void tv_8532_PollReg(struct gspca_dev *gspca_dev) } } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32); reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00); @@ -450,14 +450,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w_1(gspca_dev, TV8532_GPIO_OE, 0x0b); } -static void sd_stop0(struct gspca_dev *gspca_dev) -{ -} - -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void tv8532_preprocess(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -611,11 +603,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, - .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, }; diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 5454f0eb007..f8c3ff30e46 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1477,8 +1477,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and time */ +static int sd_init(struct gspca_dev *gspca_dev) { return 0; } @@ -1640,19 +1640,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) reg_w(dev, 0x89, 0xffff, 0xffff); } -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ -/* struct usb_device *dev = gspca_dev->dev; - __u8 buffread; - - reg_w(dev, 0x89, 0xffff, 0xffff); - reg_w(dev, 0xa0, 0x01, 0xb301); - reg_w(dev, 0xa0, 0x09, 0xb303); - reg_w(dev, 0x89, 0xffff, 0xffff); -*/ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1741,11 +1728,10 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = ARRAY_SIZE(sd_ctrls), .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index e78b9b7591d..f4239b442c1 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7171,8 +7171,8 @@ static int sd_config(struct gspca_dev *gspca_dev, return 0; } -/* this function is called at open time */ -static int sd_open(struct gspca_dev *gspca_dev) +/* this function is called at probe and resume time */ +static int sd_init(struct gspca_dev *gspca_dev) { reg_w(gspca_dev->dev, 0x01, 0x0000); return 0; @@ -7333,10 +7333,6 @@ static void sd_start(struct gspca_dev *gspca_dev) } } -static void sd_stopN(struct gspca_dev *gspca_dev) -{ -} - static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -7344,11 +7340,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev) send_unknown(gspca_dev->dev, sd->sensor); } -/* this function is called at close time */ -static void sd_close(struct gspca_dev *gspca_dev) -{ -} - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u8 *data, @@ -7508,11 +7499,9 @@ static const struct sd_desc sd_desc = { .ctrls = sd_ctrls, .nctrls = sizeof sd_ctrls / sizeof sd_ctrls[0], .config = sd_config, - .open = sd_open, + .init = sd_init, .start = sd_start, - .stopN = sd_stopN, .stop0 = sd_stop0, - .close = sd_close, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, }; From de00448f708a2fd705f9c5ccdfa383dbf3dcef92 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:16 -0300 Subject: [PATCH 447/638] V4L/DVB (8823): gspca: H and V flips work for ov7670 only in ov519. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 19378dde27c..4df4eec9f7e 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -126,6 +126,7 @@ static struct ctrl sd_ctrls[] = { .get = sd_getcolors, }, /* next controls work with ov7670 only */ +#define HFLIP_IDX 3 { { .id = V4L2_CID_HFLIP, @@ -140,6 +141,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_sethflip, .get = sd_gethflip, }, +#define VFLIP_IDX 4 { { .id = V4L2_CID_VFLIP, @@ -1370,6 +1372,9 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; + if (sd->sensor != SEN_OV7670) + gspca_dev->ctrl_dis = (1 << HFLIP_IDX) + | (1 << VFLIP_IDX); return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); From a1e8288b1d80130119692818b46694660f28e03a Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:17 -0300 Subject: [PATCH 448/638] V4L/DVB (8824): gspca: Too much code removed in the suspend/resume changeset. - the stream must stop when the main application closes the device. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index fe096e76e5c..42b0b83d095 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -806,6 +806,11 @@ static int dev_close(struct inode *inode, struct file *file) /* if the file did the capture, free the streaming resources */ if (gspca_dev->capt_file == file) { + if (gspca_dev->streaming) { + mutex_lock(&gspca_dev->usb_lock); + gspca_stream_off(gspca_dev); + mutex_unlock(&gspca_dev->usb_lock); + } frame_free(gspca_dev); gspca_dev->capt_file = NULL; gspca_dev->memory = GSPCA_MEMORY_NO; From 8a5b2e909d56a1d5edec5e8f8848e03aafbc588e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:17 -0300 Subject: [PATCH 449/638] V4L/DVB (8825): gspca: More controls for pac73xx and new webcam 093a:2624. -Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac207.c | 16 +- drivers/media/video/gspca/pac7311.c | 311 ++++++++++++++++++------- drivers/media/video/gspca/pac_common.h | 9 +- 4 files changed, 237 insertions(+), 100 deletions(-) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 2dd2f774dd8..c503467da25 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -188,6 +188,7 @@ pac7311 093a:2608 Trust WB-3300p pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x +pac7311 093a:2624 PAC7302 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index a15bccad947..83b5f740c94 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -56,12 +56,6 @@ MODULE_LICENSE("GPL"); #define PAC207_GAIN_KNEE 20 #define PAC207_AUTOGAIN_DEADZONE 30 -/* We calculating the autogain at the end of the transfer of a frame, at this - moment a frame with the old settings is being transmitted, and a frame is - being captured with the old settings. So if we adjust the autogain we must - ignore atleast the 2 next frames for the new settings to come into effect - before doing any other adjustments */ -#define PAC207_AUTOGAIN_IGNORE_FRAMES 3 /* specific webcam descriptor */ struct sd { @@ -338,6 +332,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev) pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */ } +/* Include pac common sof detection functions */ +#include "pac_common.h" + static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -351,12 +348,9 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev) else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, 100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE, PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE)) - sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES; + sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; } -/* Include pac common sof detection functions */ -#include "pac_common.h" - static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, __u8 *data, @@ -500,7 +494,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) sd->gain = PAC207_GAIN_DEFAULT; if (gspca_dev->streaming) { sd->autogain_ignore_frames = - PAC207_AUTOGAIN_IGNORE_FRAMES; + PAC_AUTOGAIN_IGNORE_FRAMES; setexposure(gspca_dev); setgain(gspca_dev); } diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e22ca610334..14b98111cd9 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -44,6 +44,9 @@ 0x10/- Master gain 0-31 -/0x10 Another gain 0-15, limited influence (1-2x gain I guess) 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused + -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to + completely disable the analog amplification block. Set to 0x68 + for max gain, 0x14 for minimal gain. */ #define MODULE_NAME "pac7311" @@ -61,6 +64,8 @@ struct sd { unsigned char brightness; unsigned char contrast; unsigned char colors; + unsigned char gain; + unsigned char exposure; unsigned char autogain; __u8 hflip; __u8 vflip; @@ -88,8 +93,14 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { +/* This control is pac7302 only */ +#define BRIGHTNESS_IDX 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -105,6 +116,7 @@ static struct ctrl sd_ctrls[] = { .set = sd_setbrightness, .get = sd_getbrightness, }, +/* This control is for both the 7302 and the 7311 */ { { .id = V4L2_CID_CONTRAST, @@ -120,6 +132,8 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcontrast, .get = sd_getcontrast, }, +/* This control is pac7302 only */ +#define SATURATION_IDX 2 { { .id = V4L2_CID_SATURATION, @@ -135,6 +149,39 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, +/* All controls below are for both the 7302 and the 7311 */ + { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Gain", + .minimum = 0, +#define GAIN_MAX 255 + .maximum = GAIN_MAX, + .step = 1, +#define GAIN_DEF 127 +#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */ + .default_value = GAIN_DEF, + }, + .set = sd_setgain, + .get = sd_getgain, + }, + { + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Exposure", + .minimum = 0, +#define EXPOSURE_MAX 255 + .maximum = EXPOSURE_MAX, + .step = 1, +#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */ +#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */ + .default_value = EXPOSURE_DEF, + }, + .set = sd_setexposure, + .get = sd_getexposure, + }, { { .id = V4L2_CID_AUTOGAIN, @@ -149,8 +196,6 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, -/* next controls work with pac7302 only */ -#define HFLIP_IDX 4 { { .id = V4L2_CID_HFLIP, @@ -165,7 +210,6 @@ static struct ctrl sd_ctrls[] = { .set = sd_sethflip, .get = sd_gethflip, }, -#define VFLIP_IDX 5 { { .id = V4L2_CID_VFLIP, @@ -345,7 +389,7 @@ static const __u8 page4_7311[] = { 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62, 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa, - 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x01, + 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68, 0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00, 0x23, 0x28, 0x04, 0x11, 0x00, 0x00 }; @@ -374,7 +418,7 @@ static void reg_w(struct gspca_dev *gspca_dev, usb_sndctrlpipe(gspca_dev->dev, 0), 0, /* request */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, index, gspca_dev->usb_buf, 1, + 0, index, gspca_dev->usb_buf, 1, 500); } @@ -469,20 +513,22 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); - gspca_dev->ctrl_dis = (1 << HFLIP_IDX) - | (1 << VFLIP_IDX); + gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX) + | (1 << SATURATION_IDX); } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; + sd->gain = GAIN_DEF; + sd->exposure = EXPOSURE_DEF; sd->autogain = AUTOGAIN_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; return 0; } -/* rev 12a only */ +/* This function is used by pac7302 only */ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -509,37 +555,11 @@ static void setbrightcont(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xdc, 0x01); } -/* This function is used by pac7302 only */ -static void setbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int brightness; - - if (sd->sensor == SENSOR_PAC7302) { - setbrightcont(gspca_dev); - return; - } -/* HDG: this is not brightness but gain, I'll add gain and exposure controls - in a next patch */ - return; - - brightness = BRIGHTNESS_MAX - sd->brightness; - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x0e, 0x00); - reg_w(gspca_dev, 0x0f, brightness); - /* load registers to sensor (Bit 0, auto clear) */ - reg_w(gspca_dev, 0x11, 0x01); - PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness); -} - +/* This function is used by pac7311 only */ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (sd->sensor == SENSOR_PAC7302) { - setbrightcont(gspca_dev); - return; - } reg_w(gspca_dev, 0xff, 0x04); reg_w(gspca_dev, 0x10, sd->contrast >> 4); /* load registers to sensor (Bit 0, auto clear) */ @@ -548,28 +568,82 @@ static void setcontrast(struct gspca_dev *gspca_dev) /* This function is used by pac7302 only */ static void setcolors(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i, v; + static const int a[9] = + {217, -212, 0, -101, 170, -67, -38, -315, 355}; + static const int b[9] = + {19, 106, 0, 19, 106, 1, 19, 106, 1}; + + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x11, 0x01); + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ + for (i = 0; i < 9; i++) { + v = a[i] * sd->colors / COLOR_MAX + b[i]; + reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); + reg_w(gspca_dev, 0x0f + 2 * i + 1, v); + } + reg_w(gspca_dev, 0xdc, 0x01); + PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); +} + +static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; if (sd->sensor == SENSOR_PAC7302) { - int i, v; - static const int a[9] = - {217, -212, 0, -101, 170, -67, -38, -315, 355}; - static const int b[9] = - {19, 106, 0, 19, 106, 1, 19, 106, 1}; - - reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - reg_w(gspca_dev, 0x11, 0x01); - reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - reg_w(gspca_dev, 0xff, 0x00); /* page 0 */ - for (i = 0; i < 9; i++) { - v = a[i] * sd->colors / COLOR_MAX + b[i]; - reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07); - reg_w(gspca_dev, 0x0f + 2 * i + 1, v); - } - reg_w(gspca_dev, 0xdc, 0x01); - PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x10, sd->gain >> 3); + } else { + int gain = GAIN_MAX - sd->gain; + if (gain < 1) + gain = 1; + else if (gain > 245) + gain = 245; + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ + reg_w(gspca_dev, 0x0e, 0x00); + reg_w(gspca_dev, 0x0f, gain); } + /* load registers to sensor (Bit 0, auto clear) */ + reg_w(gspca_dev, 0x11, 0x01); +} + +static void setexposure(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 reg; + + /* register 2 of frame 3/4 contains the clock divider configuring the + no fps according to the formula: 60 / reg. sd->exposure is the + desired exposure time in ms. */ + reg = 120 * sd->exposure / 1000; + if (reg < 2) + reg = 2; + else if (reg > 63) + reg = 63; + + if (sd->sensor == SENSOR_PAC7302) { + /* On the pac7302 reg2 MUST be a multiple of 3, so round it to + the nearest multiple of 3 */ + reg = ((reg + 1) / 3) * 3; + reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ + reg_w(gspca_dev, 0x02, reg); + } else { + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ + reg_w(gspca_dev, 0x02, reg); + /* Page 1 register 8 must always be 0x08 except when not in + 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */ + reg_w(gspca_dev, 0xff, 0x01); + if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv && + reg <= 3) + reg_w(gspca_dev, 0x08, 0x09); + else + reg_w(gspca_dev, 0x08, 0x08); + } + /* load registers to sensor (Bit 0, auto clear) */ + reg_w(gspca_dev, 0x11, 0x01); } static void sethvflip(struct gspca_dev *gspca_dev) @@ -579,14 +653,15 @@ static void sethvflip(struct gspca_dev *gspca_dev) if (sd->sensor == SENSOR_PAC7302) { reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ - data = (sd->hflip ? 0x00 : 0x08) + data = (sd->hflip ? 0x08 : 0x00) | (sd->vflip ? 0x04 : 0x00); } else { - reg_w(gspca_dev, 0xff, 0x04); /* page 3 */ + reg_w(gspca_dev, 0xff, 0x04); /* page 4 */ data = (sd->hflip ? 0x04 : 0x00) | (sd->vflip ? 0x08 : 0x00); } reg_w(gspca_dev, 0x21, data); + /* load registers to sensor (Bit 0, auto clear) */ reg_w(gspca_dev, 0x11, 0x01); } @@ -602,61 +677,49 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->sof_read = 0; - if (sd->sensor == SENSOR_PAC7302) + if (sd->sensor == SENSOR_PAC7302) { reg_w_var(gspca_dev, start_7302); - else + setbrightcont(gspca_dev); + setcolors(gspca_dev); + } else { reg_w_var(gspca_dev, start_7311); - - setcontrast(gspca_dev); - setbrightness(gspca_dev); - setcolors(gspca_dev); + setcontrast(gspca_dev); + } + setgain(gspca_dev); + setexposure(gspca_dev); + sethvflip(gspca_dev); /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { case 2: /* 160x120 pac7311 */ - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x20); - reg_w(gspca_dev, 0x1b, 0x00); reg_w(gspca_dev, 0x87, 0x10); break; case 1: /* 320x240 pac7311 */ - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x03); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x09); reg_w(gspca_dev, 0x17, 0x30); reg_w(gspca_dev, 0x87, 0x11); break; case 0: /* 640x480 */ if (sd->sensor == SENSOR_PAC7302) break; - reg_w(gspca_dev, 0xff, 0x04); - reg_w(gspca_dev, 0x02, 0x07); reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x08, 0x08); reg_w(gspca_dev, 0x17, 0x00); reg_w(gspca_dev, 0x87, 0x12); break; } - /* start stream */ - reg_w(gspca_dev, 0xff, 0x01); - if (sd->sensor == SENSOR_PAC7302) { - sethvflip(gspca_dev); - reg_w(gspca_dev, 0x78, 0x01); - reg_w(gspca_dev, 0xff, 0x01); - reg_w(gspca_dev, 0x78, 0x01); - } else { - reg_w(gspca_dev, 0x78, 0x44); - reg_w(gspca_dev, 0x78, 0x45); - } - sd->sof_read = 0; sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); + + /* start stream */ + reg_w(gspca_dev, 0xff, 0x01); + if (sd->sensor == SENSOR_PAC7302) + reg_w(gspca_dev, 0x78, 0x01); + else + reg_w(gspca_dev, 0x78, 0x05); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -691,8 +754,28 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } } +/* Include pac common sof detection functions */ +#include "pac_common.h" + static void do_autogain(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + int avg_lum = atomic_read(&sd->avg_lum); + int desired_lum; + + if (avg_lum == -1) + return; + + if (sd->sensor == SENSOR_PAC7302) + desired_lum = 70 + sd->brightness * 2; + else + desired_lum = 200; + + if (sd->autogain_ignore_frames > 0) + sd->autogain_ignore_frames--; + else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, + 10, GAIN_KNEE, EXPOSURE_KNEE)) + sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; } static const unsigned char pac7311_jpeg_header1[] = { @@ -704,9 +787,6 @@ static const unsigned char pac7311_jpeg_header2[] = { 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00 }; -/* Include pac common sof detection functions */ -#include "pac_common.h" - /* this function is run at interrupt level */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ @@ -790,7 +870,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val) sd->brightness = val; if (gspca_dev->streaming) - setbrightness(gspca_dev); + setbrightcont(gspca_dev); return 0; } @@ -807,8 +887,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->contrast = val; - if (gspca_dev->streaming) - setcontrast(gspca_dev); + if (gspca_dev->streaming) { + if (sd->sensor == SENSOR_PAC7302) + setbrightcont(gspca_dev); + else + setcontrast(gspca_dev); + } return 0; } @@ -838,11 +922,61 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->gain = val; + if (gspca_dev->streaming) + setgain(gspca_dev); + return 0; +} + +static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->gain; + return 0; +} + +static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->exposure = val; + if (gspca_dev->streaming) + setexposure(gspca_dev); + return 0; +} + +static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->exposure; + return 0; +} + static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) { struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; + /* when switching to autogain set defaults to make sure + we are on a valid point of the autogain gain / + exposure knee graph, and give this change time to + take effect before doing autogain. */ + if (sd->autogain) { + sd->exposure = EXPOSURE_DEF; + sd->gain = GAIN_DEF; + if (gspca_dev->streaming) { + sd->autogain_ignore_frames = + PAC_AUTOGAIN_IGNORE_FRAMES; + setexposure(gspca_dev); + setgain(gspca_dev); + } + } return 0; } @@ -914,6 +1048,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h index a19b5d44c00..34d4b1494cd 100644 --- a/drivers/media/video/gspca/pac_common.h +++ b/drivers/media/video/gspca/pac_common.h @@ -23,6 +23,13 @@ * */ +/* We calculate the autogain at the end of the transfer of a frame, at this + moment a frame with the old settings is being transmitted, and a frame is + being captured with the old settings. So if we adjust the autogain we must + ignore atleast the 2 next frames for the new settings to come into effect + before doing any other adjustments */ +#define PAC_AUTOGAIN_IGNORE_FRAMES 3 + static const unsigned char pac_sof_marker[5] = { 0xff, 0xff, 0x00, 0xff, 0x96 }; @@ -37,7 +44,7 @@ static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev, if (m[i] == pac_sof_marker[sd->sof_read]) { sd->sof_read++; if (sd->sof_read == sizeof(pac_sof_marker)) { - PDEBUG(D_STREAM, + PDEBUG(D_FRAM, "SOF found, bytes to analyze: %u." " Frame starts at byte #%u", len, i + 1); From 086272555d1b7936512de1e6d9efacdf87169cb0 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:17 -0300 Subject: [PATCH 450/638] V4L/DVB (8826): gspca: Webcam Labtec 2200 (093a:2626) added in pac7311. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + drivers/media/video/gspca/pac7311.c | 1 + 2 files changed, 2 insertions(+) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index c503467da25..0f03900c48f 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -189,6 +189,7 @@ pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350 pac7311 093a:260f SnakeCam pac7311 093a:2621 PAC731x pac7311 093a:2624 PAC7302 +pac7311 093a:2626 Labtec 2200 zc3xx 0ac8:0302 Z-star Vimicro zc0302 vc032x 0ac8:0321 Vimicro generic vc0321 vc032x 0ac8:0323 Vimicro Vc0323 diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 14b98111cd9..35244cf9851 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -1049,6 +1049,7 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311}, {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302}, {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302}, + {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302}, {} }; MODULE_DEVICE_TABLE(usb, device_table); From 038ec7c772cb093411b163c22f389787722cfd8e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:18 -0300 Subject: [PATCH 451/638] V4L/DVB (8827): gspca: Stop pac7302 autogain oscillation. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 48 +++++++++++++++++------------ 1 file changed, 29 insertions(+), 19 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 35244cf9851..723219d4964 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -39,7 +39,7 @@ Address Description 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on - the 7302, so one of 3, 6, 9, ... + the 7302, so one of 3, 6, 9, ..., except when between 6 and 12? -/0x0f Master gain 1-245, low value = high gain 0x10/- Master gain 0-31 -/0x10 Another gain 0-15, limited influence (1-2x gain I guess) @@ -626,8 +626,9 @@ static void setexposure(struct gspca_dev *gspca_dev) if (sd->sensor == SENSOR_PAC7302) { /* On the pac7302 reg2 MUST be a multiple of 3, so round it to - the nearest multiple of 3 */ - reg = ((reg + 1) / 3) * 3; + the nearest multiple of 3, except when between 6 and 12? */ + if (reg < 6 || reg > 12) + reg = ((reg + 1) / 3) * 3; reg_w(gspca_dev, 0xff, 0x03); /* page 3 */ reg_w(gspca_dev, 0x02, reg); } else { @@ -761,20 +762,32 @@ static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int avg_lum = atomic_read(&sd->avg_lum); - int desired_lum; + int desired_lum, deadzone; if (avg_lum == -1) return; - if (sd->sensor == SENSOR_PAC7302) - desired_lum = 70 + sd->brightness * 2; - else + if (sd->sensor == SENSOR_PAC7302) { + desired_lum = 270 + sd->brightness * 4; + /* Hack hack, with the 7202 the first exposure step is + pretty large, so if we're about to make the first + exposure increase make the deadzone large to avoid + oscilating */ + if (desired_lum > avg_lum && sd->gain == GAIN_DEF && + sd->exposure > EXPOSURE_DEF && + sd->exposure < 42) + deadzone = 90; + else + deadzone = 30; + } else { desired_lum = 200; + deadzone = 20; + } if (sd->autogain_ignore_frames > 0) sd->autogain_ignore_frames--; else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum, - 10, GAIN_KNEE, EXPOSURE_KNEE)) + deadzone, GAIN_KNEE, EXPOSURE_KNEE)) sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES; } @@ -802,7 +815,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int n, lum_offset, footer_length; if (sd->sensor == SENSOR_PAC7302) { - lum_offset = 34 + sizeof pac_sof_marker; + /* 6 bytes after the FF D9 EOF marker a number of lumination + bytes are send corresponding to different parts of the + image, the 14th and 15th byte after the EOF seem to + correspond to the center of the image */ + lum_offset = 61 + sizeof pac_sof_marker; footer_length = 74; } else { lum_offset = 24 + sizeof pac_sof_marker; @@ -829,18 +846,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* Get average lumination */ if (gspca_dev->last_packet_type == LAST_PACKET && - n >= lum_offset) { - if (sd->sensor == SENSOR_PAC7302) - atomic_set(&sd->avg_lum, - (data[-lum_offset] << 8) | + n >= lum_offset) + atomic_set(&sd->avg_lum, data[-lum_offset] + data[-lum_offset + 1]); - else - atomic_set(&sd->avg_lum, - data[-lum_offset] + - data[-lum_offset + 1]); - } else { + else atomic_set(&sd->avg_lum, -1); - } /* Start the new frame with the jpeg header */ gspca_frame_add(gspca_dev, FIRST_PACKET, frame, From 91de65ac00f976c972940bedd9dbfe38bb8bfec3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:18 -0300 Subject: [PATCH 452/638] V4L/DVB (8828): gspca: Set the clock at the end of initialization in sonixj. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 5380b4323a7..feb17dbdd7b 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -444,7 +444,7 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10}, /* */ {0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10}, - {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, +/* {0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */ {} }; static const __u8 ov7660_sensor_init[][8] = { @@ -811,6 +811,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev, reg_w1(gspca_dev, 0x17, 0xae); reg_w1(gspca_dev, 0x01, 0x42); break; +/*jfm: from win trace */ + case SENSOR_OV7660: + reg_w1(gspca_dev, 0x01, 0x61); + reg_w1(gspca_dev, 0x17, 0x20); + reg_w1(gspca_dev, 0x01, 0x60); + reg_w1(gspca_dev, 0x01, 0x40); + break; default: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0x61); @@ -1076,7 +1083,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; unsigned val; - __u8 reg84_full[13]; + __u8 reg84_full[0x15]; memset(reg84_full, 0, sizeof reg84_full); val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10; /* 10..30 */ @@ -1088,7 +1095,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev) / BRIGHTNESS_MAX; else val = 0; - reg84_full[10] = val; /* 00..1f */ + reg84_full[0x12] = val; /* 00..1f */ reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full); } @@ -1184,7 +1191,6 @@ static void sd_start(struct gspca_dev *gspca_dev) sn9c1xx = sn_tb[(int) sd->sensor]; configure_gpio(gspca_dev, sn9c1xx); -/* reg_w1(gspca_dev, 0x01, 0x44); jfm from win trace*/ reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]); reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]); reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]); @@ -1300,7 +1306,6 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x18, reg18); reg_w1(gspca_dev, 0x17, reg17); - reg_w1(gspca_dev, 0x01, reg1); switch (sd->sensor) { case SENSOR_HV7131R: case SENSOR_MI0360: @@ -1314,6 +1319,7 @@ static void sd_start(struct gspca_dev *gspca_dev) break; } setautogain(gspca_dev); + reg_w1(gspca_dev, 0x01, reg1); } static void sd_stopN(struct gspca_dev *gspca_dev) From 8295d99ee5340f1e62b53c8adc979e0789299445 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:19 -0300 Subject: [PATCH 453/638] V4L/DVB (8829): gspca: Have a clean kmalloc-ated buffer for USB exchanges. The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 4 +- drivers/media/video/gspca/etoms.c | 4 +- drivers/media/video/gspca/gspca.c | 8 ++ drivers/media/video/gspca/gspca.h | 3 +- drivers/media/video/gspca/mars.c | 21 +--- drivers/media/video/gspca/sonixb.c | 24 +---- drivers/media/video/gspca/sonixj.c | 43 ++++---- drivers/media/video/gspca/sunplus.c | 147 +++++++++++++++------------- drivers/media/video/gspca/t613.c | 2 +- 9 files changed, 116 insertions(+), 140 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 3db5c1e3283..8c91ffde953 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -124,7 +124,7 @@ static void reg_r(struct gspca_dev *gspca_dev, struct usb_device *dev = gspca_dev->dev; #ifdef GSPCA_DEBUG - if (len > sizeof gspca_dev->usb_buf) { + if (len > USB_BUF_SZ) { err("reg_r: buffer overflow"); return; } @@ -164,7 +164,7 @@ static void reg_w(struct gspca_dev *gspca_dev, struct usb_device *dev = gspca_dev->dev; #ifdef GSPCA_DEBUG - if (len > sizeof gspca_dev->usb_buf) { + if (len > USB_BUF_SZ) { err("reg_w: buffer overflow"); return; } diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index c03b1f45de1..9eb6adb24bd 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -235,7 +235,7 @@ static void reg_r(struct gspca_dev *gspca_dev, struct usb_device *dev = gspca_dev->dev; #ifdef GSPCA_DEBUG - if (len > sizeof gspca_dev->usb_buf) { + if (len > USB_BUF_SZ) { err("reg_r: buffer overflow"); return; } @@ -273,7 +273,7 @@ static void reg_w(struct gspca_dev *gspca_dev, struct usb_device *dev = gspca_dev->dev; #ifdef GSPCA_DEBUG - if (len > sizeof gspca_dev->usb_buf) { + if (len > USB_BUF_SZ) { err("reg_w: buffer overflow"); return; } diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 42b0b83d095..7be69284da0 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1731,6 +1731,12 @@ int gspca_dev_probe(struct usb_interface *intf, err("couldn't kzalloc gspca struct"); return -EIO; } + gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL); + if (!gspca_dev->usb_buf) { + err("out of memory"); + ret = -EIO; + goto out; + } gspca_dev->dev = dev; gspca_dev->iface = interface->bInterfaceNumber; gspca_dev->nbalt = intf->num_altsetting; @@ -1774,6 +1780,7 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: + kfree(gspca_dev->usb_buf); kfree(gspca_dev); return ret; } @@ -1806,6 +1813,7 @@ void gspca_disconnect(struct usb_interface *intf) /* We don't want people trying to open up the device */ video_unregister_device(&gspca_dev->vdev); /* Free the memory */ + kfree(gspca_dev->usb_buf); kfree(gspca_dev); PDEBUG(D_PROBE, "disconnect complete"); } diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 7c2f44b2397..c17625cff9b 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -127,7 +127,8 @@ struct gspca_dev { const struct sd_desc *sd_desc; /* subdriver description */ unsigned ctrl_dis; /* disabled controls (bit map) */ - __u8 usb_buf[8]; /* buffer for USB exchanges */ +#define USB_BUF_SZ 64 + __u8 *usb_buf; /* buffer for USB exchanges */ struct urb *urb[MAX_NURBS]; __u8 *frbuf; /* buffer for nframes */ diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index 281475913a6..4d5db47ba8c 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -100,22 +100,6 @@ static int reg_w(struct gspca_dev *gspca_dev, return rc; } -static int reg_w_buf(struct gspca_dev *gspca_dev, - __u16 index, __u8 *buf, int len) -{ - int rc; - - rc = usb_control_msg(gspca_dev->dev, - usb_sndbulkpipe(gspca_dev->dev, 4), - 0x12, - 0xc8, /* ?? */ - 0, /* value */ - index, buf, len, 500); - if (rc < 0) - PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc); - return rc; -} - static void bulk_w(struct gspca_dev *gspca_dev, __u16 *pch, __u16 Address) @@ -175,7 +159,6 @@ static void sd_start(struct gspca_dev *gspca_dev) /* Initialize the MR97113 chip register */ - data = kmalloc(16, GFP_KERNEL); data[0] = 0x00; /* address */ data[1] = 0x0c | 0x01; /* reg 0 */ data[2] = 0x01; /* reg 1 */ @@ -195,12 +178,10 @@ static void sd_start(struct gspca_dev *gspca_dev) data[10] = 0x5d; /* reg 9, I2C device address * [for PAS5101 (0x40)] [for MI (0x5d)] */ - err_code = reg_w_buf(gspca_dev, data[0], data, 11); - kfree(data); + err_code = reg_w(gspca_dev, data[0], 11); if (err_code < 0) return; - data = gspca_dev->usb_buf; data[0] = 0x23; /* address */ data[1] = 0x09; /* reg 35, append frame header */ diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 044a9ec58db..162beb3fead 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -410,7 +410,7 @@ static void reg_w(struct gspca_dev *gspca_dev, int len) { #ifdef GSPCA_DEBUG - if (len > sizeof gspca_dev->usb_buf) { + if (len > USB_BUF_SZ) { PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow"); return; } @@ -426,26 +426,6 @@ static void reg_w(struct gspca_dev *gspca_dev, 500); } -static void reg_w_big(struct gspca_dev *gspca_dev, - __u16 value, - const __u8 *buffer, - int len) -{ - __u8 *tmpbuf; - - tmpbuf = kmalloc(len, GFP_KERNEL); - memcpy(tmpbuf, buffer, len); - usb_control_msg(gspca_dev->dev, - usb_sndctrlpipe(gspca_dev->dev, 0), - 0x08, /* request */ - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, - 0, /* index */ - tmpbuf, len, - 500); - kfree(tmpbuf); -} - static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer) { int retry = 60; @@ -886,7 +866,7 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg 0x17 SensorClk enable inv Clk 0x60 */ reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1); /* Set the registers from the template */ - reg_w_big(gspca_dev, 0x01, sn9c10x, l); + reg_w(gspca_dev, 0x01, sn9c10x, l); switch (sd->sensor) { case SENSOR_HV7131R: i2c_w_vector(gspca_dev, hv7131_sensor_init, diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index feb17dbdd7b..5697959e724 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -613,10 +613,16 @@ static const __u8 qtable4[] = { 0x29, 0x29, 0x29, 0x29 }; -/* read bytes (len < sizeof gspca_dev->usb_buf) to gspca_dev->usb_buf */ +/* read bytes to gspca_dev->usb_buf */ static void reg_r(struct gspca_dev *gspca_dev, __u16 value, int len) { +#ifdef GSPCA_DEBUG + if (len > USB_BUF_SZ) { + err("reg_r: buffer overflow"); + return; + } +#endif usb_control_msg(gspca_dev->dev, usb_rcvctrlpipe(gspca_dev->dev, 0), 0, @@ -649,29 +655,20 @@ static void reg_w(struct gspca_dev *gspca_dev, { PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..", value, buffer[0], buffer[1]); - if (len <= sizeof gspca_dev->usb_buf) { - memcpy(gspca_dev->usb_buf, buffer, len); - usb_control_msg(gspca_dev->dev, - usb_sndctrlpipe(gspca_dev->dev, 0), - 0x08, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, 0, - gspca_dev->usb_buf, len, - 500); - } else { - __u8 *tmpbuf; - - tmpbuf = kmalloc(len, GFP_KERNEL); - memcpy(tmpbuf, buffer, len); - usb_control_msg(gspca_dev->dev, - usb_sndctrlpipe(gspca_dev->dev, 0), - 0x08, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - value, 0, - tmpbuf, len, - 500); - kfree(tmpbuf); +#ifdef GSPCA_DEBUG + if (len > USB_BUF_SZ) { + err("reg_w: buffer overflow"); + return; } +#endif + memcpy(gspca_dev->usb_buf, buffer, len); + usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), + 0x08, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + value, 0, + gspca_dev->usb_buf, len, + 500); } /* I2C write 1 byte */ diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index bddf73360c2..1cfcc6c4955 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -449,31 +449,47 @@ static const __u8 qtable_spca504_default[2][64] = { 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e} }; -static void reg_r(struct usb_device *dev, - __u16 req, - __u16 index, - __u8 *buffer, __u16 length) +/* read bytes to gspca_dev->usb_buf */ +static void reg_r(struct gspca_dev *gspca_dev, + __u16 req, + __u16 index, + __u16 len) { - usb_control_msg(dev, - usb_rcvctrlpipe(dev, 0), +#ifdef GSPCA_DEBUG + if (len > USB_BUF_SZ) { + err("reg_r: buffer overflow"); + return; + } +#endif + usb_control_msg(gspca_dev->dev, + usb_rcvctrlpipe(gspca_dev->dev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, /* value */ - index, buffer, length, + index, + len ? gspca_dev->usb_buf : NULL, len, 500); } -static void reg_w(struct usb_device *dev, - __u16 req, - __u16 value, - __u16 index, - __u8 *buffer, __u16 length) +/* write bytes from gspca_dev->usb_buf */ +static void reg_w(struct gspca_dev *gspca_dev, + __u16 req, + __u16 value, + __u16 index, + __u16 len) { - usb_control_msg(dev, - usb_sndctrlpipe(dev, 0), +#ifdef GSPCA_DEBUG + if (len > USB_BUF_SZ) { + err("reg_w: buffer overflow"); + return; + } +#endif + usb_control_msg(gspca_dev->dev, + usb_sndctrlpipe(gspca_dev->dev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, index, buffer, length, + value, index, + len ? gspca_dev->usb_buf : NULL, len, 500); } @@ -634,7 +650,7 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev) int count = 10; while (--count > 0) { - reg_r(gspca_dev->dev, 0x21, 0, gspca_dev->usb_buf, 1); + reg_r(gspca_dev, 0x21, 0, 1); if ((gspca_dev->usb_buf[0] & 0x01) == 0) break; msleep(10); @@ -644,15 +660,14 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev) static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev) { - struct usb_device *dev = gspca_dev->dev; int count = 50; while (--count > 0) { - reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1); + reg_r(gspca_dev, 0x21, 1, 1); if (gspca_dev->usb_buf[0] != 0) { gspca_dev->usb_buf[0] = 0; - reg_w(dev, 0x21, 0, 1, gspca_dev->usb_buf, 1); - reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1); + reg_w(gspca_dev, 0x21, 0, 1, 1); + reg_r(gspca_dev, 0x21, 1, 1); spca504B_PollingDataReady(gspca_dev); break; } @@ -662,16 +677,14 @@ static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev) static void spca50x_GetFirmware(struct gspca_dev *gspca_dev) { - struct usb_device *dev = gspca_dev->dev; __u8 *data; - data = kmalloc(64, GFP_KERNEL); - reg_r(dev, 0x20, 0, data, 5); + data = gspca_dev->usb_buf; + reg_r(gspca_dev, 0x20, 0, 5); PDEBUG(D_STREAM, "FirmWare : %d %d %d %d %d ", data[0], data[1], data[2], data[3], data[4]); - reg_r(dev, 0x23, 0, data, 64); - reg_r(dev, 0x23, 1, data, 64); - kfree(data); + reg_r(gspca_dev, 0x23, 0, 64); + reg_r(gspca_dev, 0x23, 1, 64); } static void spca504B_SetSizeType(struct gspca_dev *gspca_dev) @@ -686,21 +699,21 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev) Type = 0; switch (sd->bridge) { case BRIDGE_SPCA533: - reg_w(dev, 0x31, 0, 0, NULL, 0); + reg_w(gspca_dev, 0x31, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); rc = spca504B_PollingDataReady(gspca_dev); spca50x_GetFirmware(gspca_dev); gspca_dev->usb_buf[0] = 2; /* type */ - reg_w(dev, 0x24, 0, 8, gspca_dev->usb_buf, 1); - reg_r(dev, 0x24, 8, gspca_dev->usb_buf, 1); + reg_w(gspca_dev, 0x24, 0, 8, 1); + reg_r(gspca_dev, 0x24, 8, 1); gspca_dev->usb_buf[0] = Size; - reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1); - reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */ + reg_w(gspca_dev, 0x25, 0, 4, 1); + reg_r(gspca_dev, 0x25, 4, 1); /* size */ rc = spca504B_PollingDataReady(gspca_dev); /* Init the cam width height with some values get on init ? */ - reg_w(dev, 0x31, 0, 4, NULL, 0); + reg_w(gspca_dev, 0x31, 0, 4, 0); spca504B_WaitCmdStatus(gspca_dev); rc = spca504B_PollingDataReady(gspca_dev); break; @@ -708,12 +721,12 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev) /* case BRIDGE_SPCA504B: */ /* case BRIDGE_SPCA536: */ gspca_dev->usb_buf[0] = Size; - reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1); - reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1); /* size */ + reg_w(gspca_dev, 0x25, 0, 4, 1); + reg_r(gspca_dev, 0x25, 4, 1); /* size */ Type = 6; gspca_dev->usb_buf[0] = Type; - reg_w(dev, 0x27, 0, 0, gspca_dev->usb_buf, 1); - reg_r(dev, 0x27, 0, gspca_dev->usb_buf, 1); /* type */ + reg_w(gspca_dev, 0x27, 0, 0, 1); + reg_r(gspca_dev, 0x27, 0, 1); /* type */ rc = spca504B_PollingDataReady(gspca_dev); break; case BRIDGE_SPCA504: @@ -752,18 +765,15 @@ static void spca504_wait_status(struct gspca_dev *gspca_dev) static void spca504B_setQtable(struct gspca_dev *gspca_dev) { - struct usb_device *dev = gspca_dev->dev; - gspca_dev->usb_buf[0] = 3; - reg_w(dev, 0x26, 0, 0, gspca_dev->usb_buf, 1); - reg_r(dev, 0x26, 0, gspca_dev->usb_buf, 1); + reg_w(gspca_dev, 0x26, 0, 0, 1); + reg_r(gspca_dev, 0x26, 0, 1); spca504B_PollingDataReady(gspca_dev); } static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; int pollreg = 1; switch (sd->bridge) { @@ -774,20 +784,20 @@ static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev) default: /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA504B: */ - reg_w(dev, 0, 0, 0x21a7, NULL, 0); /* brightness */ - reg_w(dev, 0, 0x20, 0x21a8, NULL, 0); /* contrast */ - reg_w(dev, 0, 0, 0x21ad, NULL, 0); /* hue */ - reg_w(dev, 0, 1, 0x21ac, NULL, 0); /* sat/hue */ - reg_w(dev, 0, 0x20, 0x21ae, NULL, 0); /* saturation */ - reg_w(dev, 0, 0, 0x21a3, NULL, 0); /* gamma */ + reg_w(gspca_dev, 0, 0, 0x21a7, 0); /* brightness */ + reg_w(gspca_dev, 0, 0x20, 0x21a8, 0); /* contrast */ + reg_w(gspca_dev, 0, 0, 0x21ad, 0); /* hue */ + reg_w(gspca_dev, 0, 1, 0x21ac, 0); /* sat/hue */ + reg_w(gspca_dev, 0, 0x20, 0x21ae, 0); /* saturation */ + reg_w(gspca_dev, 0, 0, 0x21a3, 0); /* gamma */ break; case BRIDGE_SPCA536: - reg_w(dev, 0, 0, 0x20f0, NULL, 0); - reg_w(dev, 0, 0x21, 0x20f1, NULL, 0); - reg_w(dev, 0, 0x40, 0x20f5, NULL, 0); - reg_w(dev, 0, 1, 0x20f4, NULL, 0); - reg_w(dev, 0, 0x40, 0x20f6, NULL, 0); - reg_w(dev, 0, 0, 0x2089, NULL, 0); + reg_w(gspca_dev, 0, 0, 0x20f0, 0); + reg_w(gspca_dev, 0, 0x21, 0x20f1, 0); + reg_w(gspca_dev, 0, 0x40, 0x20f5, 0); + reg_w(gspca_dev, 0, 1, 0x20f4, 0); + reg_w(gspca_dev, 0, 0x40, 0x20f6, 0); + reg_w(gspca_dev, 0, 0, 0x2089, 0); break; } if (pollreg) @@ -799,7 +809,6 @@ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; - struct usb_device *dev = gspca_dev->dev; struct cam *cam; cam = &gspca_dev->cam; @@ -811,7 +820,7 @@ static int sd_config(struct gspca_dev *gspca_dev, if (sd->subtype == AiptekMiniPenCam13) { /* try to get the firmware as some cam answer 2.0.1.2.2 * and should be a spca504b then overwrite that setting */ - reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1); + reg_r(gspca_dev, 0x20, 0, 1); switch (gspca_dev->usb_buf[0]) { case 1: break; /* (right bridge/subtype) */ @@ -860,12 +869,12 @@ static int sd_init(struct gspca_dev *gspca_dev) switch (sd->bridge) { case BRIDGE_SPCA504B: - reg_w(dev, 0x1d, 0, 0, NULL, 0); - reg_w(dev, 0, 1, 0x2306, NULL, 0); - reg_w(dev, 0, 0, 0x0d04, NULL, 0); - reg_w(dev, 0, 0, 0x2000, NULL, 0); - reg_w(dev, 0, 0x13, 0x2301, NULL, 0); - reg_w(dev, 0, 0, 0x2306, NULL, 0); + reg_w(gspca_dev, 0x1d, 0, 0, 0); + reg_w(gspca_dev, 0, 1, 0x2306, 0); + reg_w(gspca_dev, 0, 0, 0x0d04, 0); + reg_w(gspca_dev, 0, 0, 0x2000, 0); + reg_w(gspca_dev, 0, 0x13, 0x2301, 0); + reg_w(gspca_dev, 0, 0, 0x2306, 0); /* fall thru */ case BRIDGE_SPCA533: rc = spca504B_PollingDataReady(gspca_dev); @@ -873,12 +882,12 @@ static int sd_init(struct gspca_dev *gspca_dev) break; case BRIDGE_SPCA536: spca50x_GetFirmware(gspca_dev); - reg_r(dev, 0x00, 0x5002, gspca_dev->usb_buf, 1); + reg_r(gspca_dev, 0x00, 0x5002, 1); gspca_dev->usb_buf[0] = 0; - reg_w(dev, 0x24, 0, 0, gspca_dev->usb_buf, 1); - reg_r(dev, 0x24, 0, gspca_dev->usb_buf, 1); + reg_w(gspca_dev, 0x24, 0, 0, 1); + reg_r(gspca_dev, 0x24, 0, 1); rc = spca504B_PollingDataReady(gspca_dev); - reg_w(dev, 0x34, 0, 0, NULL, 0); + reg_w(gspca_dev, 0x34, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); break; case BRIDGE_SPCA504C: /* pccam600 */ @@ -971,12 +980,12 @@ static void sd_start(struct gspca_dev *gspca_dev) /* case BRIDGE_SPCA536: */ if (sd->subtype == MegapixV4 || sd->subtype == LogitechClickSmart820) { - reg_w(dev, 0xf0, 0, 0, NULL, 0); + reg_w(gspca_dev, 0xf0, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); - reg_r(dev, 0xf0, 4, NULL, 0); + reg_r(gspca_dev, 0xf0, 4, 0); spca504B_WaitCmdStatus(gspca_dev); } else { - reg_w(dev, 0x31, 0, 4, NULL, 0); + reg_w(gspca_dev, 0x31, 0, 4, 0); spca504B_WaitCmdStatus(gspca_dev); rc = spca504B_PollingDataReady(gspca_dev); } @@ -1045,7 +1054,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA536: */ /* case BRIDGE_SPCA504B: */ - reg_w(dev, 0x31, 0, 0, NULL, 0); + reg_w(gspca_dev, 0x31, 0, 0, 0); spca504B_WaitCmdStatus(gspca_dev); spca504B_PollingDataReady(gspca_dev); break; diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 81b175e15ca..f034c748fc7 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -391,7 +391,7 @@ static void reg_w(struct gspca_dev *gspca_dev, NULL, 0, 500); return; } - if (len <= sizeof gspca_dev->usb_buf) { + if (len <= USB_BUF_SZ) { memcpy(gspca_dev->usb_buf, buffer, len); usb_control_msg(gspca_dev->dev, usb_sndctrlpipe(gspca_dev->dev, 0), From 271315a9b4363ed884024022f2cf799344548e8f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:19 -0300 Subject: [PATCH 454/638] V4L/DVB (8830): gspca: Move some probe code to the new init function. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/pac7311.c | 15 +++++++++------ drivers/media/video/gspca/sonixb.c | 8 ++++---- 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 723219d4964..d4be5184328 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -245,7 +245,7 @@ static struct v4l2_pix_format vga_mode[] = { }; /* pac 7302 */ -static const __u8 probe_7302[] = { +static const __u8 init_7302[] = { /* index,value */ 0xff, 0x01, /* page 1 */ 0x78, 0x00, /* deactivate */ @@ -341,7 +341,7 @@ static const __u8 page3_7302[] = { }; /* pac 7311 */ -static const __u8 probe_7311[] = { +static const __u8 init_7311[] = { 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */ 0x78, 0x40, /* Bit_0=start stream, Bit_6=LED */ 0x78, 0x44, /* Bit_0=start stream, Bit_6=LED */ @@ -503,14 +503,10 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->sensor = id->driver_info; if (sd->sensor == SENSOR_PAC7302) { PDEBUG(D_CONF, "Find Sensor PAC7302"); - reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302); - cam->cam_mode = &vga_mode[2]; /* only 640x480 */ cam->nmodes = 1; } else { PDEBUG(D_CONF, "Find Sensor PAC7311"); - reg_w_seq(gspca_dev, probe_7311, sizeof probe_7311); - cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX) @@ -669,6 +665,13 @@ static void sethvflip(struct gspca_dev *gspca_dev) /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->sensor == SENSOR_PAC7302) + reg_w_seq(gspca_dev, init_7302, sizeof init_7302); + else + reg_w_seq(gspca_dev, init_7311, sizeof init_7311); + return 0; } diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 162beb3fead..60260803124 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -736,7 +736,6 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; int sif = 0; - const __u8 stop = 0x09; /* Disable stream turn of LED */ reg_r(gspca_dev, 0x00); if (gspca_dev->usb_buf[0] != 0x10) @@ -773,15 +772,16 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->autogain = AUTOGAIN_DEF; sd->freq = FREQ_DEF; - /* Disable stream turn of LED */ - reg_w(gspca_dev, 0x01, &stop, 1); - return 0; } /* this function is called at probe and resume time */ static int sd_init(struct gspca_dev *gspca_dev) { + const __u8 stop = 0x09; /* Disable stream turn of LED */ + + reg_w(gspca_dev, 0x01, &stop, 1); + return 0; } From 222a07ffd8e280b1bf4a6f7edab8b6fa27a5455a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:20 -0300 Subject: [PATCH 455/638] V4L/DVB (8831): gspca: Resolve webcam conflicts between some drivers. -remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/etoms.c | 2 +- drivers/media/video/gspca/sonixb.c | 8 ++++++-- drivers/media/video/gspca/sonixj.c | 6 ++++-- drivers/media/video/gspca/zc3xx.c | 17 +++++------------ .../media/video/sn9c102/sn9c102_devtable.h | 13 +++++++------ drivers/media/video/zc0301/zc0301_sensor.h | 19 ------------------- 6 files changed, 23 insertions(+), 42 deletions(-) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 9eb6adb24bd..4ff0e386914 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -897,7 +897,7 @@ static struct sd_desc sd_desc = { /* -- module initialisation -- */ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106}, -#ifndef CONFIG_USB_ET61X251 +#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE {USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX}, #endif {} diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 60260803124..f30e6ec9137 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1153,7 +1153,7 @@ static const struct sd_desc sd_desc = { #define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) static __devinitdata struct usb_device_id device_table[] = { -#ifndef CONFIG_USB_SN9C102 +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */ SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */ @@ -1167,7 +1167,7 @@ static __devinitdata struct usb_device_id device_table[] = { #endif {USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */ SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)}, -#ifndef CONFIG_USB_SN9C102 +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */ SFCI(OV7630, F_GAIN, 0, 0x21)}, {USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */ @@ -1180,10 +1180,14 @@ static __devinitdata struct usb_device_id device_table[] = { SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */ SFCI(OV7630, F_GAIN, 0, 0x21)}, +#endif {USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */ SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */ SFCI(OV7630, F_GAIN, 0, 0x21)}, + {USB_DEVICE(0x0c45, 0x608f), /* SN9C103 */ + SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)}, {USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */ SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)}, {USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */ diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 5697959e724..d75b1d20b31 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1556,7 +1556,7 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (i2c_addr) static const __devinitdata struct usb_device_id device_table[] = { -#ifndef CONFIG_USB_SN9C102 +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)}, {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)}, {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)}, @@ -1589,9 +1589,11 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)}, {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)}, /* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */ -#ifndef CONFIG_USB_SN9C102 +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)}, +#endif {USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE /* {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */ {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)}, {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)}, diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index f4239b442c1..8d7c27e6ac7 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7508,26 +7508,21 @@ static const struct sd_desc sd_desc = { static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x041e, 0x4017)}, {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x401e)}, {USB_DEVICE(0x041e, 0x401f)}, -#endif + {USB_DEVICE(0x041e, 0x4022)}, {USB_DEVICE(0x041e, 0x4029)}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x041e, 0x4036)}, {USB_DEVICE(0x041e, 0x403a)}, -#endif {USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250}, {USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0458, 0x7007)}, {USB_DEVICE(0x0458, 0x700c)}, {USB_DEVICE(0x0458, 0x700f)}, -#endif {USB_DEVICE(0x0461, 0x0a00)}, {USB_DEVICE(0x046d, 0x08a0)}, {USB_DEVICE(0x046d, 0x08a1)}, @@ -7539,7 +7534,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x08aa)}, {USB_DEVICE(0x046d, 0x08ac)}, {USB_DEVICE(0x046d, 0x08ad)}, -#ifndef CONFIG_USB_ZC0301 +#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE {USB_DEVICE(0x046d, 0x08ae)}, #endif {USB_DEVICE(0x046d, 0x08af)}, @@ -7554,22 +7549,20 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x055f, 0xc005)}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x055f, 0xd003)}, {USB_DEVICE(0x055f, 0xd004)}, -#endif {USB_DEVICE(0x0698, 0x2003)}, + {USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106}, {USB_DEVICE(0x0ac8, 0x0302)}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0ac8, 0x301b)}, +#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE {USB_DEVICE(0x0ac8, 0x303b)}, #endif {USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250}, -#ifndef CONFIG_USB_ZC0301 {USB_DEVICE(0x0ac8, 0x307b)}, {USB_DEVICE(0x10fd, 0x0128)}, + {USB_DEVICE(0x10fd, 0x804d)}, {USB_DEVICE(0x10fd, 0x8050)}, -#endif {} /* end of entry */ }; #undef DVNAME diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 6ff489baacf..85499a3e4ab 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -45,6 +45,7 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */ { SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), }, @@ -53,24 +54,24 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), }, - { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */ { SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), }, /* SN9C103 */ { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */ { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */ { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, @@ -105,7 +106,7 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), }, - { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */ { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), }, diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h index 70fe6fc6cdd..b0cd49c438a 100644 --- a/drivers/media/video/zc0301/zc0301_sensor.h +++ b/drivers/media/video/zc0301/zc0301_sensor.h @@ -60,27 +60,8 @@ zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor); #define ZC0301_ID_TABLE \ static const struct usb_device_id zc0301_id_table[] = { \ - { ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, /* ICM105 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x401f, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x4022, 0xff), }, \ - { ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */ \ - { ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */ \ - { ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */ \ { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \ - { ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \ - { ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */ \ { ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \ - { ZC0301_USB_DEVICE(0x10fd, 0x0128, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130 */ \ - { ZC0301_USB_DEVICE(0x10fd, 0x804e, 0xff), }, /* TAS5130 */ \ { } \ }; From 20122542df420a31532c8e2b5d4107e9846bac6b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 3 Sep 2008 17:12:20 -0300 Subject: [PATCH 456/638] V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/vc032x.c | 4 ++-- include/linux/videodev2.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index f8c3ff30e46..bd4c226c9a0 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -88,12 +88,12 @@ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format vc0321_mode[] = { - {320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, + {320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE, .bytesperline = 320, .sizeimage = 320 * 240 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, - {640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, + {640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE, .bytesperline = 640, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_SRGB, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 6c73516b74c..303d93ffd6b 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -335,6 +335,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_SPCA561 v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define V4L2_PIX_FMT_PAC207 v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ #define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ +#define V4L2_PIX_FMT_YVYU v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */ /* * F O R M A T E N U M E R A T I O N From f45f06b648bad82430c64a2e1ad67dc616eb54c6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:21 -0300 Subject: [PATCH 457/638] V4L/DVB (8833): gspca: Cleanup the sonixb code. -the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 365 +++++++++++++---------------- 1 file changed, 162 insertions(+), 203 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index f30e6ec9137..8eaeaa3a96d 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -41,8 +41,12 @@ struct sd { unsigned char frames_to_drop; unsigned char freq; /* light freq filter setting */ - unsigned char fr_h_sz; /* size of frame header */ - char sensor; /* Type of image sensor chip */ + __u8 bridge; /* Type of bridge */ +#define BRIDGE_101 0 +#define BRIDGE_102 0 /* We make no difference between 101 and 102 */ +#define BRIDGE_103 1 + + __u8 sensor; /* Type of image sensor chip */ #define SENSOR_HV7131R 0 #define SENSOR_OV6650 1 #define SENSOR_OV7630 2 @@ -50,15 +54,31 @@ struct sd { #define SENSOR_PAS202 4 #define SENSOR_TAS5110 5 #define SENSOR_TAS5130CXX 6 - char sensor_has_gain; - __u8 sensor_addr; __u8 reg11; }; -/* flags used in the device id table */ +typedef const __u8 sensor_init_t[8]; + +struct sensor_data { + const __u8 *bridge_init[2]; + int bridge_init_size[2]; + sensor_init_t *sensor_init; + int sensor_init_size; + sensor_init_t *sensor_bridge_init[2]; + int sensor_bridge_init_size[2]; + int flags; + unsigned ctrl_dis; + __u8 sensor_addr; +}; + +/* sensor_data flags */ #define F_GAIN 0x01 /* has gain */ #define F_SIF 0x02 /* sif or vga */ -#define F_H18 0x04 /* long (18 b) or short (12 b) frame header */ + +/* ctrl_dis helper macros */ +#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) +#define NO_FREQ (1 << FREQ_IDX) +#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) #define COMP2 0x8f #define COMP 0xc7 /* 0x87 //0x07 */ @@ -69,6 +89,18 @@ struct sd { #define SYS_CLK 0x04 +#define SENS(bridge_1, bridge_3, sensor, sensor_1, \ + sensor_3, _flags, _ctrl_dis, _sensor_addr) \ +{ \ + .bridge_init = { bridge_1, bridge_3 }, \ + .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \ + .sensor_init = sensor, \ + .sensor_init_size = sizeof(sensor), \ + .sensor_bridge_init = { sensor_1, sensor_3,}, \ + .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \ + .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \ +} + /* We calculate the autogain at the end of the transfer of a frame, at this moment a frame with the old settings is being transmitted, and a frame is being captured with the old settings. So if we adjust the autogain we must @@ -219,7 +251,7 @@ static const __u8 hv7131_sensor_init[][8] = { static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b, + 0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00 }; static const __u8 ov6650_sensor_init[][8] = @@ -260,7 +292,7 @@ static const __u8 initOv7630[] = { 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ - 0x68, COMP1, MCK_INIT1, /* r17 .. r19 */ + 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */ 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */ }; static const __u8 initOv7630_3[] = { @@ -295,47 +327,65 @@ static const __u8 ov7630_sensor_init[][8] = { {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10}, }; +static const __u8 ov7630_sensor_init_3[][8] = { + {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10}, +}; + static const __u8 initPas106[] = { 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x01, 0x00, - 0x16, 0x12, 0x28, COMP1, MCK_INIT1, + 0x16, 0x12, 0x24, COMP1, MCK_INIT1, 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c }; /* compression 0x86 mckinit1 0x2b */ -static const __u8 pas106_data[][2] = { - {0x02, 0x04}, /* Pixel Clock Divider 6 */ - {0x03, 0x13}, /* Frame Time MSB */ -/* {0x03, 0x12}, * Frame Time MSB */ - {0x04, 0x06}, /* Frame Time LSB */ -/* {0x04, 0x05}, * Frame Time LSB */ - {0x05, 0x65}, /* Shutter Time Line Offset */ -/* {0x05, 0x6d}, * Shutter Time Line Offset */ -/* {0x06, 0xb1}, * Shutter Time Pixel Offset */ - {0x06, 0xcd}, /* Shutter Time Pixel Offset */ - {0x07, 0xc1}, /* Black Level Subtract Sign */ -/* {0x07, 0x00}, * Black Level Subtract Sign */ - {0x08, 0x06}, /* Black Level Subtract Level */ - {0x08, 0x06}, /* Black Level Subtract Level */ -/* {0x08, 0x01}, * Black Level Subtract Level */ - {0x09, 0x05}, /* Color Gain B Pixel 5 a */ - {0x0a, 0x04}, /* Color Gain G1 Pixel 1 5 */ - {0x0b, 0x04}, /* Color Gain G2 Pixel 1 0 5 */ - {0x0c, 0x05}, /* Color Gain R Pixel 3 1 */ - {0x0d, 0x00}, /* Color GainH Pixel */ - {0x0e, 0x0e}, /* Global Gain */ - {0x0f, 0x00}, /* Contrast */ - {0x10, 0x06}, /* H&V synchro polarity */ - {0x11, 0x06}, /* ?default */ - {0x12, 0x06}, /* DAC scale */ - {0x14, 0x02}, /* ?default */ - {0x13, 0x01}, /* Validate Settings */ +static const __u8 pas106_sensor_init[][8] = { + /* Pixel Clock Divider 6 */ + { 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 }, + /* Frame Time MSB (also seen as 0x12) */ + { 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 }, + /* Frame Time LSB (also seen as 0x05) */ + { 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 }, + /* Shutter Time Line Offset (also seen as 0x6d) */ + { 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 }, + /* Shutter Time Pixel Offset (also seen as 0xb1) */ + { 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 }, + /* Black Level Subtract Sign (also seen 0x00) */ + { 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 }, + /* Black Level Subtract Level (also seen 0x01) */ + { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, + { 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 }, + /* Color Gain B Pixel 5 a */ + { 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 }, + /* Color Gain G1 Pixel 1 5 */ + { 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 }, + /* Color Gain G2 Pixel 1 0 5 */ + { 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 }, + /* Color Gain R Pixel 3 1 */ + { 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 }, + /* Color GainH Pixel */ + { 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 }, + /* Global Gain */ + { 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 }, + /* Contrast */ + { 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 }, + /* H&V synchro polarity */ + { 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 }, + /* ?default */ + { 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 }, + /* DAC scale */ + { 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 }, + /* ?default */ + { 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 }, + /* Validate Settings */ + { 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 }, }; + static const __u8 initPas202[] = { 0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x03, 0x0a, /* 6 */ - 0x28, 0x1e, 0x28, 0x89, 0x30, + 0x28, 0x1e, 0x28, 0x89, 0x20, 0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c }; static const __u8 pas202_sensor_init[][8] = { @@ -390,6 +440,21 @@ static const __u8 tas5130_sensor_init[][8] = { {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}, }; +struct sensor_data sensor_data[] = { +SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), +SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), +SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, + F_GAIN, 0, 0x21), +SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ, + 0), +SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0, + NO_EXPO|NO_FREQ, 0), +SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF, + NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, + 0), +}; + /* get one byte in gspca_dev->usb_buf */ static void reg_r(struct gspca_dev *gspca_dev, __u16 value) @@ -468,7 +533,7 @@ static void setbrightness(struct gspca_dev *gspca_dev) {0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10}; /* change reg 0x06 */ - i2cOV[1] = sd->sensor_addr; + i2cOV[1] = sensor_data[sd->sensor].sensor_addr; i2cOV[3] = sd->brightness; if (i2c_w(gspca_dev, i2cOV) < 0) goto err; @@ -555,7 +620,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev) case SENSOR_OV7630: { __u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10}; - i2c[1] = sd->sensor_addr; + i2c[1] = sensor_data[sd->sensor].sensor_addr; i2c[3] = gain >> 2; if (i2c_w(gspca_dev, i2c) < 0) goto err; @@ -582,7 +647,7 @@ static void setgain(struct gspca_dev *gspca_dev) rgb_value = gain; reg_w(gspca_dev, 0x11, &rgb_value, 1); - if (sd->sensor_has_gain) + if (sensor_data[sd->sensor].flags & F_GAIN) setsensorgain(gspca_dev); } @@ -662,7 +727,7 @@ static void setexposure(struct gspca_dev *gspca_dev) reg10 = reg10_max; /* Write reg 10 and reg11 low nibble */ - i2c[1] = sd->sensor_addr; + i2c[1] = sensor_data[sd->sensor].sensor_addr; i2c[3] = reg10; i2c[4] |= reg11 - 1; @@ -702,7 +767,7 @@ static void setfreq(struct gspca_dev *gspca_dev) ? 0x4f : 0x8a; break; } - i2c[1] = sd->sensor_addr; + i2c[1] = sensor_data[sd->sensor].sensor_addr; if (i2c_w(gspca_dev, i2c) < 0) PDEBUG(D_ERR, "i2c error setfreq"); break; @@ -735,28 +800,19 @@ static int sd_config(struct gspca_dev *gspca_dev, { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; - int sif = 0; reg_r(gspca_dev, 0x00); if (gspca_dev->usb_buf[0] != 0x10) return -ENODEV; /* copy the webcam info from the device id */ - sd->sensor = (id->driver_info >> 24) & 0xff; - if (id->driver_info & (F_GAIN << 16)) - sd->sensor_has_gain = 1; - if (id->driver_info & (F_SIF << 16)) - sif = 1; - if (id->driver_info & (F_H18 << 16)) - sd->fr_h_sz = 18; /* size of frame header */ - else - sd->fr_h_sz = 12; - gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff; - sd->sensor_addr = id->driver_info & 0xff; + sd->sensor = id->driver_info >> 8; + sd->bridge = id->driver_info & 0xff; + gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis; cam = &gspca_dev->cam; cam->epaddr = 0x01; - if (!sif) { + if (!(sensor_data[sd->sensor].flags & F_SIF)) { cam->cam_mode = vga_mode; cam->nmodes = ARRAY_SIZE(vga_mode); } else { @@ -785,78 +841,29 @@ static int sd_init(struct gspca_dev *gspca_dev) return 0; } -static void pas106_i2cinit(struct gspca_dev *gspca_dev) -{ - int i; - const __u8 *data; - __u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 }; - - i = ARRAY_SIZE(pas106_data); - data = pas106_data[0]; - while (--i >= 0) { - memcpy(&i2c1[2], data, 2); - /* copy 2 bytes from the template */ - if (i2c_w(gspca_dev, i2c1) < 0) - PDEBUG(D_ERR, "i2c error pas106"); - data += 2; - } -} - /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int mode, l = 0x1f; + int mode, l; const __u8 *sn9c10x; __u8 reg17_19[3]; - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07; + sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; + l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; + reg17_19[0] = sn9c10x[0x17 - 1]; + reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4); + reg17_19[2] = sn9c10x[0x19 - 1]; + /* Special cases where reg 17 and or 19 value depends on mode */ switch (sd->sensor) { - case SENSOR_HV7131R: - sn9c10x = initHv7131; - reg17_19[0] = 0x60; - reg17_19[1] = (mode << 4) | 0x8a; - reg17_19[2] = 0x20; - break; - case SENSOR_OV6650: - sn9c10x = initOv6650; - reg17_19[0] = 0x68; - reg17_19[1] = (mode << 4) | 0x8b; - reg17_19[2] = 0x20; - break; - case SENSOR_OV7630: - if (sd->fr_h_sz == 18) { /* SN9C103 */ - sn9c10x = initOv7630_3; - l = sizeof initOv7630_3; - } else - sn9c10x = initOv7630; - reg17_19[0] = 0x68; - reg17_19[1] = (mode << 4) | COMP2; - reg17_19[2] = MCK_INIT1; - break; - case SENSOR_PAS106: - sn9c10x = initPas106; - reg17_19[0] = 0x24; /* 0x28 */ - reg17_19[1] = (mode << 4) | COMP1; - reg17_19[2] = MCK_INIT1; - break; case SENSOR_PAS202: - sn9c10x = initPas202; reg17_19[0] = mode ? 0x24 : 0x20; - reg17_19[1] = (mode << 4) | 0x89; - reg17_19[2] = 0x20; break; - case SENSOR_TAS5110: - sn9c10x = initTas5110; - reg17_19[0] = 0x60; - reg17_19[1] = (mode << 4) | 0x86; - reg17_19[2] = 0x2b; /* 0xf3; */ - break; - default: -/* case SENSOR_TAS5130CXX: */ - sn9c10x = initTas5130; - reg17_19[0] = 0x60; - reg17_19[1] = (mode << 4) | COMP; + case SENSOR_TAS5130CXX: + /* probably not mode specific at all most likely the upper + nibble of 0x19 is exposure (clock divider) just as with + the tas5110, we need someone to test this. */ reg17_19[2] = mode ? 0x23 : 0x43; break; } @@ -867,41 +874,16 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1); /* Set the registers from the template */ reg_w(gspca_dev, 0x01, sn9c10x, l); - switch (sd->sensor) { - case SENSOR_HV7131R: - i2c_w_vector(gspca_dev, hv7131_sensor_init, - sizeof hv7131_sensor_init); - break; - case SENSOR_OV6650: - i2c_w_vector(gspca_dev, ov6650_sensor_init, - sizeof ov6650_sensor_init); - break; - case SENSOR_OV7630: - i2c_w_vector(gspca_dev, ov7630_sensor_init, - sizeof ov7630_sensor_init); - if (sd->fr_h_sz == 18) { /* SN9C103 */ - const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00, - 0x00, 0x00, 0x10 }; - i2c_w(gspca_dev, i2c); - } - break; - case SENSOR_PAS106: - pas106_i2cinit(gspca_dev); - break; - case SENSOR_PAS202: - i2c_w_vector(gspca_dev, pas202_sensor_init, - sizeof pas202_sensor_init); - break; - case SENSOR_TAS5110: - i2c_w_vector(gspca_dev, tas5110_sensor_init, - sizeof tas5110_sensor_init); - break; - default: -/* case SENSOR_TAS5130CXX: */ - i2c_w_vector(gspca_dev, tas5130_sensor_init, - sizeof tas5130_sensor_init); - break; - } + + /* Init the sensor */ + i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init, + sensor_data[sd->sensor].sensor_init_size); + if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge]) + i2c_w_vector(gspca_dev, + sensor_data[sd->sensor].sensor_bridge_init[sd->bridge], + sensor_data[sd->sensor].sensor_bridge_init_size[ + sd->bridge]); + /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2); /* compression register */ @@ -937,10 +919,7 @@ static void sd_start(struct gspca_dev *gspca_dev) static void sd_stopN(struct gspca_dev *gspca_dev) { - __u8 ByteSend; - - ByteSend = 0x09; /* 0X00 */ - reg_w(gspca_dev, 0x01, &ByteSend, 1); + sd_init(gspca_dev); } static void sd_pkt_scan(struct gspca_dev *gspca_dev, @@ -970,15 +949,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, && data[5 + i] == 0x96) { /* start of frame */ int lum = -1; int pkt_type = LAST_PACKET; + int fr_h_sz = (sd->bridge == BRIDGE_103) ? + 18 : 12; - if (len - i < sd->fr_h_sz) { + if (len - i < fr_h_sz) { PDEBUG(D_STREAM, "packet too short to" " get avg brightness"); - } else if (sd->fr_h_sz == 12) { - lum = data[i + 8] + (data[i + 9] << 8); - } else { + } else if (sd->bridge == BRIDGE_103) { lum = data[i + 9] + (data[i + 10] << 8); + } else { + lum = data[i + 8] + (data[i + 9] << 8); } if (lum == 0) { lum = -1; @@ -993,8 +974,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame = gspca_frame_add(gspca_dev, pkt_type, frame, data, 0); - data += i + sd->fr_h_sz; - len -= i + sd->fr_h_sz; + data += i + fr_h_sz; + len -= i + fr_h_sz; gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); return; @@ -1143,55 +1124,33 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \ - .driver_info = (SENSOR_ ## sensor << 24) \ - | ((flags) << 16) \ - | ((disable_ctrls) << 8) \ - | (i2c_addr) -#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) -#define NO_FREQ (1 << FREQ_IDX) -#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) +#define SB(sensor, bridge) \ + .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge + static __devinitdata struct usb_device_id device_table[] = { #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE - {USB_DEVICE(0x0c45, 0x6001), /* SN9C102 */ - SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6005), /* SN9C101 */ - SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6007), /* SN9C101 */ - SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6009), /* SN9C101 */ - SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x600d), /* SN9C101 */ - SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, + {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, + {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, + {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, + {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, + {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, #endif - {USB_DEVICE(0x0c45, 0x6011), /* SN9C101 - SN9C101G */ - SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)}, + {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE - {USB_DEVICE(0x0c45, 0x6019), /* SN9C101 */ - SFCI(OV7630, F_GAIN, 0, 0x21)}, - {USB_DEVICE(0x0c45, 0x6024), /* SN9C102 */ - SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6025), /* SN9C102 */ - SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6028), /* SN9C102 */ - SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x6029), /* SN9C101 */ - SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x602c), /* SN9C102 */ - SFCI(OV7630, F_GAIN, 0, 0x21)}, + {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, + {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, + {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, + {USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)}, + {USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)}, + {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)}, #endif - {USB_DEVICE(0x0c45, 0x602d), /* SN9C102 */ - SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)}, + {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE - {USB_DEVICE(0x0c45, 0x602e), /* SN9C102 */ - SFCI(OV7630, F_GAIN, 0, 0x21)}, - {USB_DEVICE(0x0c45, 0x608f), /* SN9C103 */ - SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)}, - {USB_DEVICE(0x0c45, 0x60af), /* SN9C103 */ - SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)}, - {USB_DEVICE(0x0c45, 0x60b0), /* SN9C103 */ - SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)}, + {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, + {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, + {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, + {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, #endif {} }; From 5c51518da2cabc08af535cf041c6a3697f9e931f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:22 -0300 Subject: [PATCH 458/638] V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images. Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 8eaeaa3a96d..346305b1264 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -207,29 +207,29 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 160 * 120, + .sizeimage = 160 * 120 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240, + .sizeimage = 320 * 240 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480, + .sizeimage = 640 * 480 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; static struct v4l2_pix_format sif_mode[] = { {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 176 * 144, + .sizeimage = 176 * 144 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 352, - .sizeimage = 352 * 288, + .sizeimage = 352 * 288 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, }; From c437d657c59921b048997d5bc1f5733670112902 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 3 Sep 2008 17:12:22 -0300 Subject: [PATCH 459/638] V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb. 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 54 ++++++++++++++++++++++++------ 1 file changed, 44 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 346305b1264..5033810f56f 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -74,6 +74,10 @@ struct sensor_data { /* sensor_data flags */ #define F_GAIN 0x01 /* has gain */ #define F_SIF 0x02 /* sif or vga */ +#define F_RAW 0x04 /* sensor tested ok with raw bayer mode */ + +/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */ +#define MODE_RAW 0x10 /* raw bayer mode */ /* ctrl_dis helper macros */ #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) @@ -205,6 +209,11 @@ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format vga_mode[] = { + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2 | MODE_RAW}, {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 160, .sizeimage = 160 * 120 * 5 / 4, @@ -222,6 +231,11 @@ static struct v4l2_pix_format vga_mode[] = { .priv = 0}, }; static struct v4l2_pix_format sif_mode[] = { + {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 176 * 144, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW}, {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 176, .sizeimage = 176 * 144 * 5 / 4, @@ -237,7 +251,7 @@ static struct v4l2_pix_format sif_mode[] = { static const __u8 initHv7131[] = { 0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, /* shift from 0x02 0x01 0x00 */ + 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, 0x28, 0x1e, 0x60, 0x8a, 0x20, 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c }; @@ -251,7 +265,7 @@ static const __u8 hv7131_sensor_init[][8] = { static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, + 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00 }; static const __u8 ov6650_sensor_init[][8] = @@ -290,7 +304,7 @@ static const __u8 ov6650_sensor_init[][8] = static const __u8 initOv7630[] = { 0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, /* r01 .. r08 */ 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ - 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ + 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */ 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */ @@ -334,7 +348,7 @@ static const __u8 ov7630_sensor_init_3[][8] = { static const __u8 initPas106[] = { 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x05, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x16, 0x12, 0x24, COMP1, MCK_INIT1, 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c }; @@ -384,7 +398,7 @@ static const __u8 pas106_sensor_init[][8] = { static const __u8 initPas202[] = { 0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x07, 0x03, 0x0a, /* 6 */ + 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a, 0x28, 0x1e, 0x28, 0x89, 0x20, 0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c }; @@ -415,7 +429,7 @@ static const __u8 pas202_sensor_init[][8] = { static const __u8 initTas5110[] = { 0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x01, 0x00, 0x46, 0x09, 0x0a, /* shift from 0x45 0x09 0x0a */ + 0x00, 0x01, 0x00, 0x45, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 }; @@ -428,7 +442,7 @@ static const __u8 tas5110_sensor_init[][8] = { static const __u8 initTas5130[] = { 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x01, 0x00, 0x69, 0x0c, 0x0a, + 0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a, 0x28, 0x1e, 0x60, COMP, MCK_INIT, 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c }; @@ -442,14 +456,15 @@ static const __u8 tas5130_sensor_init[][8] = { struct sensor_data sensor_data[] = { SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), -SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), +SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, 0, + 0x60), SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, F_GAIN, 0, 0x21), SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ, 0), -SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0, +SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_RAW, NO_EXPO|NO_FREQ, 0), -SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF, +SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), @@ -819,6 +834,10 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = sif_mode; cam->nmodes = ARRAY_SIZE(sif_mode); } + if (!(sensor_data[sd->sensor].flags & F_RAW)) { + cam->cam_mode++; + cam->nmodes--; + } sd->brightness = BRIGHTNESS_DEF; sd->gain = GAIN_DEF; sd->exposure = EXPOSURE_DEF; @@ -867,6 +886,9 @@ static void sd_start(struct gspca_dev *gspca_dev) reg17_19[2] = mode ? 0x23 : 0x43; break; } + /* Disable compression when the raw bayer format has been selected */ + if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) + reg17_19[1] &= ~0x80; /* reg 0x01 bit 2 video transfert on */ reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); @@ -929,6 +951,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, { int i; struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam = &gspca_dev->cam; /* frames start with: * ff ff 00 c4 c4 96 synchro @@ -982,6 +1005,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } } } + + if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) { + /* In raw mode we sometimes get some garbage after the frame + ignore this */ + int used = frame->data_end - frame->data; + int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage; + + if (used + len > size) + len = size - used; + } + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); } From 1d434012f23effdc69d58a88229159b57256f6ba Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 3 Sep 2008 17:12:23 -0300 Subject: [PATCH 460/638] V4L/DVB (8837): dvb: fix I2C adapters name size Some DVB drivers are incorrectly assuming that the size of i2c_adapter.name is I2C_NAME_SIZE. Here's a fix. Also change strncpy to strlcpy, as the former is error-prone (and was indeed incorrectly used.) Signed-off-by: Jean Delvare Acked-by: Uwe Bugla Reviewed-by: Michael Krufky Signed-off-by: Steven Toth Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-i2c.c | 12 ++++++------ drivers/media/dvb/frontends/cx24123.c | 4 ++-- drivers/media/dvb/frontends/s5h1420.c | 3 ++- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 55973eaf371..43a112ec6d4 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -221,12 +221,12 @@ int flexcop_i2c_init(struct flexcop_device *fc) fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; - strncpy(fc->fc_i2c_adap[0].i2c_adap.name, - "B2C2 FlexCop I2C to demod", I2C_NAME_SIZE); - strncpy(fc->fc_i2c_adap[1].i2c_adap.name, - "B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE); - strncpy(fc->fc_i2c_adap[2].i2c_adap.name, - "B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE); + strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod", + sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); + strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom", + sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); + strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner", + sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c index 386bd7472b9..7156157cb34 100644 --- a/drivers/media/dvb/frontends/cx24123.c +++ b/drivers/media/dvb/frontends/cx24123.c @@ -1072,8 +1072,8 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, if (config->dont_use_pll) cx24123_repeater_mode(state, 1, 0); - strncpy(state->tuner_i2c_adapter.name, - "CX24123 tuner I2C bus", I2C_NAME_SIZE); + strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus", + sizeof(state->tuner_i2c_adapter.name)); state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL, state->tuner_i2c_adapter.algo = &cx24123_tuner_i2c_algo; state->tuner_i2c_adapter.algo_data = NULL; diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c index 720ed9ff7c5..747d3fa2e5e 100644 --- a/drivers/media/dvb/frontends/s5h1420.c +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -915,7 +915,8 @@ struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config, state->frontend.demodulator_priv = state; /* create tuner i2c adapter */ - strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE); + strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", + sizeof(state->tuner_i2c_adapter.name)); state->tuner_i2c_adapter.class = I2C_CLASS_TV_DIGITAL, state->tuner_i2c_adapter.algo = &s5h1420_tuner_i2c_algo; state->tuner_i2c_adapter.algo_data = NULL; From af2a887c9aaca82306e9744d914ac335051ce987 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 17:12:24 -0300 Subject: [PATCH 461/638] V4L/DVB (8839): dib0700: add comment to identify 35th USB id pair This comment helps to make the code more readable. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 3dd20bfbed3..e182aa15c6a 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1117,7 +1117,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, - { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, +/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); From 9a0c04a1ee3b4df6a30ae6975e13c558908df400 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 3 Sep 2008 17:12:24 -0300 Subject: [PATCH 462/638] V4L/DVB (8840): dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx) This adds basic support for the Hauppauge Nova-TD-500 84xxx series. A future patch will allow for one aerial input to supply both tuners. With the current code, an aerial must be plugged into each antannae input in order for both tuners to function. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index e182aa15c6a..6c0e5c5f436 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1118,6 +1118,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1373,7 +1374,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { } }, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[17], NULL }, @@ -1386,6 +1387,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Hauppauge Nova-TD Stick (52009)", { &dib0700_usb_id_table[35], NULL }, { NULL }, + }, + { "Hauppauge Nova-TD-500 (84xxx)", + { &dib0700_usb_id_table[36], NULL }, + { NULL }, } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 029b437caf9..03dfb9f2fe3 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -129,6 +129,7 @@ #define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 #define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941 #define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950 +#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400 #define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 From 8da9bae3292ea8aee803e7cda295877c361f0694 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 3 Sep 2008 17:12:25 -0300 Subject: [PATCH 463/638] V4L/DVB (8842): vivi_release(): fix use-after-free video_device_release() does kfree(), which made the following printk() doing a use-after-free. printk() first and release then. Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index f55d77db155..8ba8daafd7e 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1021,13 +1021,13 @@ static int vivi_release(void) dev = list_entry(list, struct vivi_dev, vivi_devlist); if (-1 != dev->vfd->minor) { + printk(KERN_INFO "%s: unregistering /dev/video%d\n", + VIVI_MODULE_NAME, dev->vfd->minor); video_unregister_device(dev->vfd); - printk(KERN_INFO "%s: /dev/video%d unregistered.\n", - VIVI_MODULE_NAME, dev->vfd->minor); } else { - video_device_release(dev->vfd); - printk(KERN_INFO "%s: /dev/video%d released.\n", + printk(KERN_INFO "%s: releasing /dev/video%d\n", VIVI_MODULE_NAME, dev->vfd->minor); + video_device_release(dev->vfd); } kfree(dev); From 877b5f4eda501ece641adbbea5d1940cbbfd4f38 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 3 Sep 2008 17:12:25 -0300 Subject: [PATCH 464/638] V4L/DVB (8843): tda10048_firmware_upload(): fix a memory leak This patch fixes a memory leak ("fw" wasn't freed). Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda10048.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index 7727099a16f..04e7f1cc140 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -303,7 +303,7 @@ static int tda10048_firmware_upload(struct dvb_frontend *fe) if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) { printk(KERN_ERR "%s: firmware incorrect size\n", __func__); - return -EIO; + ret = -EIO; } else { printk(KERN_INFO "%s: firmware uploading\n", __func__); From 5d8538c1c6d85a7979c955b34f0e66d03be43da4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 3 Sep 2008 17:12:25 -0300 Subject: [PATCH 465/638] V4L/DVB (8844): dabusb_fpga_download(): fix a memory leak This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/dabusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 48f4b92a8f8..79faedf5852 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname) ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev); if (ret) { err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret); + kfree(b); return ret; } From 437cf2f1c5f05e34510f43e129af29a716b04ce6 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Wed, 3 Sep 2008 14:38:00 -0700 Subject: [PATCH 466/638] bnx2x: Accessing un-mapped page The allocated RX buffer size was 64 bytes bigger than the PCI mapped size with no good reason. If the packet was actually using the buffer up to its limit and if the last 64 bytes of the buffer crossed 4KB boundary then an unmapped PCI page was accessed. The fix is to use only one parameter for the buffer size - there is no need to differentiate between the buffer size and the PCI mapping size since the extra 64 bytes can actually be used by the FW to align the Ethernet payload to 64 bytes. Also updating the driver version and date Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x.h | 5 +++-- drivers/net/bnx2x_main.c | 34 +++++++++++++++++----------------- 2 files changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index a14dba1afcc..fd705d1295a 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -151,6 +151,8 @@ struct sw_rx_page { #define PAGES_PER_SGE_SHIFT 0 #define PAGES_PER_SGE (1 << PAGES_PER_SGE_SHIFT) +#define BCM_RX_ETH_PAYLOAD_ALIGN 64 + /* SGE ring related macros */ #define NUM_RX_SGE_PAGES 2 #define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) @@ -750,8 +752,7 @@ struct bnx2x { u32 rx_csum; u32 rx_offset; - u32 rx_buf_use_size; /* useable size */ - u32 rx_buf_size; /* with alignment */ + u32 rx_buf_size; #define ETH_OVREHEAD (ETH_HLEN + 8) /* 8 for CRC + VLAN */ #define ETH_MIN_PACKET_SIZE 60 #define ETH_MAX_PACKET_SIZE 1500 diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 82deea0a63f..a8eb3c4a47c 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -59,8 +59,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.20" -#define DRV_MODULE_RELDATE "2008/08/25" +#define DRV_MODULE_VERSION "1.45.21" +#define DRV_MODULE_RELDATE "2008/09/03" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -1027,7 +1027,7 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp, if (unlikely(skb == NULL)) return -ENOMEM; - mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, + mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size, PCI_DMA_FROMDEVICE); if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { dev_kfree_skb(skb); @@ -1169,7 +1169,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, /* move empty skb from pool to prod and map it */ prod_rx_buf->skb = fp->tpa_pool[queue].skb; mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data, - bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + bp->rx_buf_size, PCI_DMA_FROMDEVICE); pci_unmap_addr_set(prod_rx_buf, mapping, mapping); /* move partial skb from cons to pool (don't unmap yet) */ @@ -1276,7 +1276,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, pool entry status to BNX2X_TPA_STOP even if new skb allocation fails. */ pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + bp->rx_buf_size, PCI_DMA_FROMDEVICE); if (likely(new_skb)) { /* fix ip xsum and give it to the stack */ @@ -1520,7 +1520,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) } else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) { pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); skb_reserve(skb, pad); skb_put(skb, len); @@ -4229,7 +4229,7 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp, if (fp->tpa_state[i] == BNX2X_TPA_START) pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); @@ -4245,15 +4245,14 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp) u16 ring_prod, cqe_ring_prod; int i, j; - bp->rx_buf_use_size = bp->dev->mtu; - bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD; - bp->rx_buf_size = bp->rx_buf_use_size + 64; + bp->rx_buf_size = bp->dev->mtu; + bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD + + BCM_RX_ETH_PAYLOAD_ALIGN; if (bp->flags & TPA_ENABLE_FLAG) { DP(NETIF_MSG_IFUP, - "rx_buf_use_size %d rx_buf_size %d effective_mtu %d\n", - bp->rx_buf_use_size, bp->rx_buf_size, - bp->dev->mtu + ETH_OVREHEAD); + "rx_buf_size %d effective_mtu %d\n", + bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD); for_each_queue(bp, j) { struct bnx2x_fastpath *fp = &bp->fp[j]; @@ -4462,9 +4461,10 @@ static void bnx2x_init_context(struct bnx2x *bp) context->ustorm_st_context.common.status_block_id = sb_id; context->ustorm_st_context.common.flags = USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT; - context->ustorm_st_context.common.mc_alignment_size = 64; + context->ustorm_st_context.common.mc_alignment_size = + BCM_RX_ETH_PAYLOAD_ALIGN; context->ustorm_st_context.common.bd_buff_size = - bp->rx_buf_use_size; + bp->rx_buf_size; context->ustorm_st_context.common.bd_page_base_hi = U64_HI(fp->rx_desc_mapping); context->ustorm_st_context.common.bd_page_base_lo = @@ -4717,7 +4717,7 @@ static void bnx2x_init_internal_func(struct bnx2x *bp) } /* Init CQ ring mapping and aggregation size */ - max_agg_size = min((u32)(bp->rx_buf_use_size + + max_agg_size = min((u32)(bp->rx_buf_size + 8*BCM_PAGE_SIZE*PAGES_PER_SGE), (u32)0xffff); for_each_queue(bp, i) { @@ -5940,7 +5940,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp) pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), - bp->rx_buf_use_size, + bp->rx_buf_size, PCI_DMA_FROMDEVICE); rx_buf->skb = NULL; From 8e531af90f3940615623dc0aa6c94866a6773601 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 3 Sep 2008 11:49:47 -0400 Subject: [PATCH 467/638] SELinux: memory leak in security_context_to_sid_core Fix a bug and a philosophical decision about who handles errors. security_context_to_sid_core() was leaking a context in the common case. This was causing problems on fedora systems which recently have started making extensive use of this function. In discussion it was decided that if string_to_context_struct() had an error it was its own responsibility to clean up any mess it created along the way. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/ss/services.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index b52f923ce68..d11a8154500 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -811,11 +811,12 @@ static int string_to_context_struct(struct policydb *pol, /* Check the validity of the new context. */ if (!policydb_context_isvalid(pol, ctx)) { rc = -EINVAL; - context_destroy(ctx); goto out; } rc = 0; out: + if (rc) + context_destroy(ctx); return rc; } @@ -868,8 +869,7 @@ static int security_context_to_sid_core(const char *scontext, u32 scontext_len, } else if (rc) goto out; rc = sidtab_context_to_sid(&sidtab, &context, sid); - if (rc) - context_destroy(&context); + context_destroy(&context); out: read_unlock(&policy_rwlock); kfree(scontext2); From e6a5652fd156a286faadbf7a4062b5354d4e346e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Wed, 3 Sep 2008 19:33:14 -0400 Subject: [PATCH 468/638] x86: add io delay quirk for Presario F700 Manually adding "io_delay=0xed" fixes system lockups in ioapic mode on this machine. System Information Manufacturer: Hewlett-Packard Product Name: Presario F700 (KA695EA#ABF) Base Board Information Manufacturer: Quanta Product Name: 30D3 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=459546 Signed-off-by: Chuck Ebbert Signed-off-by: H. Peter Anvin --- arch/x86/kernel/io_delay.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c index 1c3a66a67f8..720d2607aac 100644 --- a/arch/x86/kernel/io_delay.c +++ b/arch/x86/kernel/io_delay.c @@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "30BF") } }, + { + .callback = dmi_io_delay_0xed_port, + .ident = "Presario F700", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"), + DMI_MATCH(DMI_BOARD_NAME, "30D3") + } + }, { } }; From ce36394269ccd9d1d286d6192ba09fa6894365e9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 3 Sep 2008 16:09:47 +0200 Subject: [PATCH 469/638] mmap: fix petty bug in anonymous shared mmap offset handling Anonymous mappings should ignore offset but shared anonymous mapping forgot to clear it and makes the following legit test program trigger SIGBUS. #include #include #include #define PAGE_SIZE 4096 int main(void) { char *p; int i; p = mmap(NULL, 2 * PAGE_SIZE, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANONYMOUS, -1, PAGE_SIZE); if (p == MAP_FAILED) { perror("mmap"); return 1; } for (i = 0; i < 2; i++) { printf("page %d\n", i); p[i * 4096] = i; } return 0; } Fix it. Signed-off-by: Tejun Heo Acked-by: Hugh Dickins Acked-by: KOSAKI Motohiro Signed-off-by: Linus Torvalds --- mm/mmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/mmap.c b/mm/mmap.c index 339cf5c4d5d..e7a5a68a9c2 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1030,6 +1030,10 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr, } else { switch (flags & MAP_TYPE) { case MAP_SHARED: + /* + * Ignore pgoff. + */ + pgoff = 0; vm_flags |= VM_SHARED | VM_MAYSHARE; break; case MAP_PRIVATE: From de014d617636d6a6bd5aef3b3d1f7f9a35669057 Mon Sep 17 00:00:00 2001 From: Alok N Kataria Date: Wed, 3 Sep 2008 18:18:01 -0700 Subject: [PATCH 470/638] x86: Change warning message in TSC calibration. When calibration against PIT fails, the warning that we print is misleading. In a virtualized environment the VM may get descheduled while calibration or, the check in PIT calibration may fail due to other virtualization overheads. The warning message explicitly assumes that calibration failed due to SMI's which may not be the case. Change that to something proper. Signed-off-by: Alok N Kataria Signed-off-by: Linus Torvalds --- arch/x86/kernel/tsc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 346cae5ac42..8f98e9de1b8 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -267,8 +267,7 @@ unsigned long native_calibrate_tsc(void) */ if (tsc_pit_min == ULONG_MAX) { /* PIT gave no useful value */ - printk(KERN_WARNING "TSC: PIT calibration failed due to " - "SMI disturbance.\n"); + printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n"); /* We don't have an alternative source, disable TSC */ if (!hpet && !pm1 && !pm2) { From 5f17cfce5776c566d64430f543a289e5cfa4538b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 4 Sep 2008 01:33:59 -0700 Subject: [PATCH 471/638] PCI: fix pbus_size_mem() resource alignment for CardBus controllers Commit 884525655d07fdee9245716b998ecdc45cdd8007 ("PCI: clean up resource alignment management") changed the resource handling to mark how a resource was aligned on a per-resource basis. Thus, instead of looking at the resource number to determine whether it was a bridge resource or a regular resource (they have different alignment rules), we should just ask the resource for its alignment directly. The reason this broke only cardbus resources was that for the other types of resources, the old way of deciding alignment actually still happened to work. But CardBus bridge resources had been changed by commit 934b7024f0ed29003c95cef447d92737ab86dc4f ("Fix cardbus resource allocation") to look more like regular resources than PCI bridge resources from an alignment handling standpoint. Reported-and-tested-by: Andrew Morton Cc: Ivan Kokshaysky Cc: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/pci/setup-bus.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 82634a2f1b1..1aad599816f 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -352,11 +352,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long continue; r_size = r->end - r->start + 1; /* For bridges size != alignment */ - align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start; + align = resource_alignment(r); order = __ffs(align) - 20; if (order > 11) { - dev_warn(&dev->dev, "BAR %d too large: " + dev_warn(&dev->dev, "BAR %d bad alignment %llx: " "%#016llx-%#016llx\n", i, + (unsigned long long)align, (unsigned long long)r->start, (unsigned long long)r->end); r->flags = 0; From c3df1a2685004bce97827bdbe7a304734009849b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Sep 2008 23:59:23 +0100 Subject: [PATCH 472/638] [ARM] omap: fix build error in ohci-omap.c drivers/usb/host/ohci-omap.c: In function 'ohci_omap_init': drivers/usb/host/ohci-omap.c:228: error: 'start_hnp' undeclared (first use in this function) Signed-off-by: Russell King --- drivers/usb/host/ohci-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 1eb64d08b60..95b3ec89c12 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd) if (cpu_is_omap16xx()) ocpi_enable(); -#ifdef CONFIG_ARCH_OMAP_OTG +#ifdef CONFIG_USB_OTG if (need_transceiver) { ohci->transceiver = otg_get_transceiver(); if (ohci->transceiver) { From 8b540fdcb7c445d61955991f071e956ef40a2f17 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 23 Aug 2008 13:56:02 +0800 Subject: [PATCH 473/638] [ARM] remove unused #include The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. arch/arm/plat-mxc/clock.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Russell King --- arch/arm/plat-mxc/clock.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c index 2f862721883..0a38f0b396e 100644 --- a/arch/arm/plat-mxc/clock.c +++ b/arch/arm/plat-mxc/clock.c @@ -37,7 +37,6 @@ #include #include #include -#include #include From 54cd3148a149f7413cc25cb832f42cf0dabcee29 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Thu, 4 Sep 2008 13:30:07 +0200 Subject: [PATCH 474/638] ACPI: Make Len Brown the ACPI maintainer again Len is back! Signed-off-by: Andi Kleen --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 663485b004f..9fc7c1c7e1b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -222,8 +222,7 @@ W: http://code.google.com/p/aceracpi S: Maintained ACPI -P: Andi Kleen -M: ak@linux.intel.com +P: Len Brown M: lenb@kernel.org L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ From d8196a93b1ce9a5abb410f39f9375912c9e53675 Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Fri, 29 Aug 2008 11:06:21 +0930 Subject: [PATCH 475/638] fujitsu-laptop: fix regression for P8010 in 2.6.27-rc The following patch (based on a patch from Stephen Gildea) fixes a regression with the LCD brightness keys on Fujitsu P8010 laptops which was observed with the 2.6.27-rc series (basically they stopped working due to changes within the fujitsu-laptop and video modules). Please apply to 2.6.27-rc and acpi git. A more complete solution for this laptop will be included in an upcoming patch, hopefully for 2.6.28. In the meantime this restores most functionality for P8010 users. Signed-off-by: Stephen Gildea Signed-off-by: Jonathan Woithe Signed-off-by: Andi Kleen --- drivers/misc/fujitsu-laptop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 7a1ef6c262d..3e56203e494 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -463,6 +463,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), }, .callback = dmi_check_cb_s6410}, + { + .ident = "FUJITSU LifeBook P8010", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), + }, + .callback = dmi_check_cb_s6410}, {} }; From 266feefeb9ea2d846ac82eb6db1a54b230364ba4 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 26 Aug 2008 13:57:34 +0800 Subject: [PATCH 476/638] ACPI: Avoid bogus timeout about SMbus check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the function of wait_transaction_complete when the timeout happens, OS will try to check the status of SMbus again. If the status is what OS expected, it will be regarded as the bogus timeout. Otherwise it will be treated as ETIME. http://bugzilla.kernel.org/show_bug.cgi?id=10483 Signed-off-by: Zhao Yakui tested-by : Oldřich Jedlička < Signed-off-by: Andi Kleen --- drivers/acpi/sbshc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index bcf2c70fca8..a4e3767b8c6 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -107,6 +107,13 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout) if (wait_event_timeout(hc->wait, smb_check_done(hc), msecs_to_jiffies(timeout))) return 0; + /* + * After the timeout happens, OS will try to check the status of SMbus. + * If the status is what OS expected, it will be regarded as the bogus + * timeout. + */ + if (smb_check_done(hc)) + return 0; else return -ETIME; } From 7d964c352b06aabb895e39d3b479e105bd9d1ca0 Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Tue, 2 Sep 2008 14:35:40 -0700 Subject: [PATCH 477/638] acer-wmi: remove debugfs entries upon unloading The exit function neglects to remove debugfs entries, leading to a BUG on reload. [akpm@linux-foundation.org: cleanups] Signed-off-by: Russ Dill Acked-by: Carlos Corbacho Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index e7a3fe508df..9c883f8b389 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1167,7 +1167,7 @@ static int create_debugfs(void) return 0; error_debugfs: - remove_debugfs(); + remove_debugfs(); return -ENOMEM; } @@ -1248,6 +1248,7 @@ error_platform_register: static void __exit acer_wmi_exit(void) { remove_sysfs(acer_platform_device); + remove_debugfs(); platform_device_del(acer_platform_device); platform_driver_unregister(&acer_platform_driver); From b380b0d4f7dffcc235c0facefa537d4655619101 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 4 Sep 2008 17:05:57 +0100 Subject: [PATCH 478/638] forgotten refcount on sysctl root table We should've set refcount on the root sysctl table; otherwise we'll blow up the first time we get down to zero dynamically registered sysctl tables. Signed-off-by: Al Viro Tested-by: James Bottomley Signed-off-by: Linus Torvalds --- kernel/sysctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index fe471334727..50ec0886fa3 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -159,6 +159,7 @@ static int proc_dointvec_taint(struct ctl_table *table, int write, struct file * static struct ctl_table root_table[]; static struct ctl_table_root sysctl_table_root; static struct ctl_table_header root_table_header = { + .count = 1, .ctl_table = root_table, .ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list), .root = &sysctl_table_root, From 9362773624bcde3ccc198fefcf3c584e5058f645 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 16:20:12 -0300 Subject: [PATCH 479/638] V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb. - Add documentation for some known registers - Add support for vga modes (320x240, 160x120) for sif sensors - Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge only thing and keeping the flag was becoming awkward. - Fixup ov6650 and pas106 auto exposure window settings Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 96 +++++++++++++++++++++--------- 1 file changed, 67 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 5033810f56f..7f67148a523 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -20,6 +20,26 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* Some documentation on known sonixb registers: + +Reg Use +0x10 high nibble red gain low nibble blue gain +0x11 low nibble green gain +0x12 hstart +0x13 vstart +0x15 hsize (hsize = register-value * 16) +0x16 vsize (vsize = register-value * 16) +0x17 bit 0 toggle compression quality (according to sn9c102 driver) +0x18 bit 7 enables compression, bit 4-5 set image down scaling: + 00 scale 1, 01 scale 1/2, 10, scale 1/4 +0x19 high-nibble is sensor clock divider, changes exposure on sensors which + use a clock generated by the bridge. Some sensors have their own clock. +0x1c auto_exposure area (for avg_lum) startx (startx = register-value * 32) +0x1d auto_exposure area (for avg_lum) starty (starty = register-value * 32) +0x1e auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32) +0x1f auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32) +*/ + #define MODULE_NAME "sonixb" #include "gspca.h" @@ -74,10 +94,10 @@ struct sensor_data { /* sensor_data flags */ #define F_GAIN 0x01 /* has gain */ #define F_SIF 0x02 /* sif or vga */ -#define F_RAW 0x04 /* sensor tested ok with raw bayer mode */ /* priv field of struct v4l2_pix_format flags (do not use low nibble!) */ #define MODE_RAW 0x10 /* raw bayer mode */ +#define MODE_REDUCED_SIF 0x20 /* vga mode (320x240 / 160x120) on sif cam */ /* ctrl_dis helper macros */ #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX)) @@ -211,7 +231,7 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 160 * 120, + .sizeimage = 160 * 120 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2 | MODE_RAW}, {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, @@ -231,9 +251,19 @@ static struct v4l2_pix_format vga_mode[] = { .priv = 0}, }; static struct v4l2_pix_format sif_mode[] = { + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_RAW | MODE_REDUCED_SIF}, + {160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120 * 5 / 4, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1 | MODE_REDUCED_SIF}, {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 176 * 144, + .sizeimage = 176 * 144 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1 | MODE_RAW}, {176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, @@ -241,6 +271,11 @@ static struct v4l2_pix_format sif_mode[] = { .sizeimage = 176 * 144 * 5 / 4, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, + {320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240 * 5 / 4, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0 | MODE_REDUCED_SIF}, {352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE, .bytesperline = 352, .sizeimage = 352 * 288 * 5 / 4, @@ -266,7 +301,7 @@ static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, - 0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00 + 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 }; static const __u8 ov6650_sensor_init[][8] = { @@ -350,7 +385,7 @@ static const __u8 initPas106[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x16, 0x12, 0x24, COMP1, MCK_INIT1, - 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c + 0x18, 0x10, 0x02, 0x02, 0x09, 0x07 }; /* compression 0x86 mckinit1 0x2b */ static const __u8 pas106_sensor_init[][8] = { @@ -456,15 +491,14 @@ static const __u8 tas5130_sensor_init[][8] = { struct sensor_data sensor_data[] = { SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), -SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, 0, - 0x60), +SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, F_GAIN, 0, 0x21), SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ, 0), -SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_RAW, +SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), -SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, +SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0), @@ -834,10 +868,6 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->cam_mode = sif_mode; cam->nmodes = ARRAY_SIZE(sif_mode); } - if (!(sensor_data[sd->sensor].flags & F_RAW)) { - cam->cam_mode++; - cam->nmodes--; - } sd->brightness = BRIGHTNESS_DEF; sd->gain = GAIN_DEF; sd->exposure = EXPOSURE_DEF; @@ -864,31 +894,39 @@ static int sd_init(struct gspca_dev *gspca_dev) static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + struct cam *cam = &gspca_dev->cam; int mode, l; const __u8 *sn9c10x; - __u8 reg17_19[3]; + __u8 reg12_19[8]; - mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07; + mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; - reg17_19[0] = sn9c10x[0x17 - 1]; - reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4); - reg17_19[2] = sn9c10x[0x19 - 1]; + memcpy(reg12_19, &sn9c10x[0x12 - 1], 8); + reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4); /* Special cases where reg 17 and or 19 value depends on mode */ switch (sd->sensor) { case SENSOR_PAS202: - reg17_19[0] = mode ? 0x24 : 0x20; + reg12_19[5] = mode ? 0x24 : 0x20; break; case SENSOR_TAS5130CXX: /* probably not mode specific at all most likely the upper nibble of 0x19 is exposure (clock divider) just as with the tas5110, we need someone to test this. */ - reg17_19[2] = mode ? 0x23 : 0x43; + reg12_19[7] = mode ? 0x23 : 0x43; break; } /* Disable compression when the raw bayer format has been selected */ - if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) - reg17_19[1] &= ~0x80; + if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) + reg12_19[6] &= ~0x80; + + /* Vga mode emulation on SIF sensor? */ + if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { + reg12_19[0] += 16; /* 0x12: hstart adjust */ + reg12_19[1] += 24; /* 0x13: vstart adjust */ + reg12_19[3] = 320 / 16; /* 0x15: hsize */ + reg12_19[4] = 240 / 16; /* 0x16: vsize */ + } /* reg 0x01 bit 2 video transfert on */ reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); @@ -907,24 +945,24 @@ static void sd_start(struct gspca_dev *gspca_dev) sd->bridge]); /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ - reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2); + reg_w(gspca_dev, 0x15, ®12_19[3], 2); /* compression register */ - reg_w(gspca_dev, 0x18, ®17_19[1], 1); + reg_w(gspca_dev, 0x18, ®12_19[6], 1); /* H_start */ - reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1); + reg_w(gspca_dev, 0x12, ®12_19[0], 1); /* V_START */ - reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1); + reg_w(gspca_dev, 0x13, ®12_19[1], 1); /* reset 0x17 SensorClk enable inv Clk 0x60 */ /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ - reg_w(gspca_dev, 0x17, ®17_19[0], 1); + reg_w(gspca_dev, 0x17, ®12_19[5], 1); /*MCKSIZE ->3 */ /*fixme: not ov7630*/ - reg_w(gspca_dev, 0x19, ®17_19[2], 1); + reg_w(gspca_dev, 0x19, ®12_19[7], 1); /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4); /* Enable video transfert */ reg_w(gspca_dev, 0x01, &sn9c10x[0], 1); /* Compression */ - reg_w(gspca_dev, 0x18, ®17_19[1], 2); + reg_w(gspca_dev, 0x18, ®12_19[6], 2); msleep(20); sd->reg11 = -1; From a94a508691d16420ad10572a33db4d45115b5f75 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 16:22:55 -0300 Subject: [PATCH 480/638] V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 to gspca. This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B sensor even if both gspca and sn9c102 are enabled, as these cams are much better supported under gspca (and extensively tested with gspca). It also removes an usb-id from sn9c102 for one more unsupported bridge sensor combo. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 6 +++--- drivers/media/video/sn9c102/sn9c102_devtable.h | 4 +++- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 7f67148a523..bde9ea9b980 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1201,10 +1201,10 @@ static const struct sd_desc sd_desc = { static __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */ + {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */ #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE - {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, - {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, - {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, + {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */ {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, #endif diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 85499a3e4ab..f47491432e8 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -40,8 +40,10 @@ struct sn9c102_device; static const struct usb_device_id sn9c102_id_table[] = { /* SN9C101 and SN9C102 */ +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, @@ -72,7 +74,7 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */ - { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */ { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, From bf2a2202f75cda679303f09d150f9549f9835953 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 16:22:56 -0300 Subject: [PATCH 481/638] V4L/DVB (8870): gspca: Fix dark room problem with sonixb. When using the sonixb driver in a dark room and given that the autoexposure algorithm starts with a setting most suitable for daylight, the picture produced by the cam may actually be 100% black leading to a avg_lum value of 0, so an avg_lum value of 0 does not always signal an exposure settings change (which it normally does). This patch adds a check for the really black image case and stops dropping all frames as invalid in this case. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index bde9ea9b980..64bc758fbae 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -52,6 +52,7 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ atomic_t avg_lum; + int prev_avg_lum; unsigned char gain; unsigned char exposure; @@ -1022,10 +1023,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, } else { lum = data[i + 8] + (data[i + 9] << 8); } - if (lum == 0) { + /* When exposure changes midway a frame we + get a lum of 0 in this case drop 2 frames + as the frames directly after an exposure + change have an unstable image. Sometimes lum + *really* is 0 (cam used in low light with + low exposure setting), so do not drop frames + if the previous lum was 0 too. */ + if (lum == 0 && sd->prev_avg_lum != 0) { lum = -1; sd->frames_to_drop = 2; - } + sd->prev_avg_lum = 0; + } else + sd->prev_avg_lum = lum; atomic_set(&sd->avg_lum, lum); if (sd->frames_to_drop) { From b77c0046a63e7aa87152f9978cf7c46e7bead7fc Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 4 Sep 2008 16:22:56 -0300 Subject: [PATCH 482/638] V4L/DVB (8872): gspca: Bad image format and offset with rev072a of spca561. - have 2 pixfmt tables - offset of Bayer frames at 16 instead of 20. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 39 +++++++++++++++++++++++++---- 1 file changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 2ca509daf0b..d2f689e366a 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -73,7 +73,7 @@ struct sd { #define AG_CNT_START 13 }; -static struct v4l2_pix_format sif_mode[] = { +static struct v4l2_pix_format sif_012a_mode[] = { {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, .bytesperline = 160, .sizeimage = 160 * 120, @@ -96,6 +96,29 @@ static struct v4l2_pix_format sif_mode[] = { .priv = 0}, }; +static struct v4l2_pix_format sif_072a_mode[] = { + {160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 176 * 144, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, + {320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; + /* * Initialization data * I'm not very sure how to split initialization from open data @@ -546,10 +569,15 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->epaddr = 0x01; gspca_dev->nbalt = 7 + 1; /* choose alternate 7 first */ - cam->cam_mode = sif_mode; - cam->nmodes = ARRAY_SIZE(sif_mode); sd->chip_revision = id->driver_info; + if (sd->chip_revision == Rev012A) { + cam->cam_mode = sif_012a_mode; + cam->nmodes = ARRAY_SIZE(sif_012a_mode); + } else { + cam->cam_mode = sif_072a_mode; + cam->nmodes = ARRAY_SIZE(sif_072a_mode); + } sd->brightness = BRIGHTNESS_DEF; sd->contrast = CONTRAST_DEF; sd->white = WHITE_DEF; @@ -833,8 +861,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame, data, len); } else { /* raw bayer (with a header, which we skip) */ - data += 20; - len -= 20; +/*fixme: is this specific to the rev012a? */ + data += 16; + len -= 16; gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); } From 0fc23d20699a6a3b7e34b3be2cc5e60317ba7849 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 16:22:57 -0300 Subject: [PATCH 483/638] V4L/DVB (8873): gspca: Bad image offset with rev012a of spca561 and adjust exposure. -Make raw bayer header size change from 20 to 16 affect rev072a only, my 2 rev012a cams both have a header size of 20 -While testing this I also tested the new exposure setting (good work on finding the register JF), and after quite a bit of testing have found out the exact meaning of the register, this patch modifies setexposure to control the exposure over a much wider range. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca561.c | 55 +++++++++++++++++++---------- 1 file changed, 36 insertions(+), 19 deletions(-) diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index d2f689e366a..1c29c279a98 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -38,9 +38,9 @@ struct sd { #define CONTRAST_MAX 0x3fff __u16 exposure; /* rev12a only */ -#define EXPOSURE_MIN 0 +#define EXPOSURE_MIN 1 #define EXPOSURE_DEF 200 -#define EXPOSURE_MAX 762 +#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */ __u8 brightness; /* rev72a only */ #define BRIGHTNESS_MIN 0 @@ -648,9 +648,31 @@ static void setexposure(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int expo; + int clock_divider; __u8 data[2]; - expo = sd->exposure + 0x20a8; /* from test */ + /* Register 0x8309 controls exposure for the spca561, + the basic exposure setting goes from 1-2047, where 1 is completely + dark and 2047 is very bright. It not only influences exposure but + also the framerate (to allow for longer exposure) from 1 - 300 it + only raises the exposure time then from 300 - 600 it halves the + framerate to be able to further raise the exposure time and for every + 300 more it halves the framerate again. This allows for a maximum + exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps). + Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12 + configure a divider for the base framerate which us used at the + exposure setting of 1-300. These bits configure the base framerate + according to the following formula: fps = 60 / (value + 2) */ + if (sd->exposure < 2048) { + expo = sd->exposure; + clock_divider = 0; + } else { + /* Add 900 to make the 0 setting of the second part of the + exposure equal to the 2047 setting of the first part. */ + expo = (sd->exposure - 2048) + 900; + clock_divider = 3; + } + expo |= clock_divider << 11; data[0] = expo; data[1] = expo >> 8; reg_w_buf(gspca_dev, 0x8309, data, 2); @@ -680,23 +702,11 @@ static void setautogain(struct gspca_dev *gspca_dev) static void sd_start_12a(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; - int Clck; + int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */ __u8 Reg8307[] = { 0xaa, 0x00 }; int mode; mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; - switch (mode) { - case 0: - case 1: - Clck = 0x8a; - break; - case 2: - Clck = 0x85; - break; - default: - Clck = 0x83; - break; - } if (mode <= 1) { /* Use compression on 320x240 and above */ reg_w_val(dev, 0x8500, 0x10 | mode); @@ -714,6 +724,7 @@ static void sd_start_12a(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setwhite(gspca_dev); setautogain(gspca_dev); + setexposure(gspca_dev); } static void sd_start_72a(struct gspca_dev *gspca_dev) { @@ -849,6 +860,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { + struct sd *sd = (struct sd *) gspca_dev; + switch (data[0]) { case 0: /* start of frame */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, @@ -861,9 +874,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame, data, len); } else { /* raw bayer (with a header, which we skip) */ -/*fixme: is this specific to the rev012a? */ - data += 16; - len -= 16; + if (sd->chip_revision == Rev012A) { + data += 20; + len -= 20; + } else { + data += 16; + len -= 16; + } gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); } From 4cce1655b26a4df1e619b2aa3d2eea1b7a6e906c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 4 Sep 2008 16:22:57 -0300 Subject: [PATCH 484/638] V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's. - Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is the same change as done for the other initdata tables in a previous patch. - Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102 drivers are both enabled. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 10 ++++++---- drivers/media/video/sn9c102/sn9c102_devtable.h | 4 ++++ 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 64bc758fbae..5dd78c6766e 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -348,7 +348,7 @@ static const __u8 initOv7630[] = { static const __u8 initOv7630_3[] = { 0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */ 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, /* r09 .. r10 */ - 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ + 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */ @@ -1230,10 +1230,12 @@ static __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, - {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, - {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, - {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, #endif + {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE + {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, +#endif + {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index f47491432e8..90a401dc388 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -68,7 +68,9 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, @@ -78,7 +80,9 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, +#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, From 65846909d684d75906269df4f5f3474e1fef568b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Sep 2008 23:46:18 +0100 Subject: [PATCH 485/638] [ARM] omap: fix virtual vs physical address space confusions mcbsp is confused as to what takes a physical or virtual address. Fix the two instances where it gets it wrong. Acked-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mach-omap1/mcbsp.c | 8 ++++++++ arch/arm/mach-omap2/mcbsp.c | 4 ++++ arch/arm/plat-omap/include/mach/mcbsp.h | 2 ++ arch/arm/plat-omap/mcbsp.c | 5 +++-- 4 files changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 826010d5d01..2baeaeb0c90 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { #ifdef CONFIG_ARCH_OMAP730 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { { + .phys_base = OMAP730_MCBSP1_BASE, .virt_base = io_p2v(OMAP730_MCBSP1_BASE), .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP730_MCBSP2_BASE, .virt_base = io_p2v(OMAP730_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, @@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP15XX static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { { + .phys_base = OMAP1510_MCBSP1_BASE, .virt_base = OMAP1510_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP1510_MCBSP2_BASE, .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, @@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP1510_MCBSP3_BASE, .virt_base = OMAP1510_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, @@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP16XX static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { { + .phys_base = OMAP1610_MCBSP1_BASE, .virt_base = OMAP1610_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, @@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP1610_MCBSP2_BASE, .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), .dma_rx_sync = OMAP_DMA_MCBSP2_RX, .dma_tx_sync = OMAP_DMA_MCBSP2_TX, @@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { .ops = &omap1_mcbsp_ops, }, { + .phys_base = OMAP1610_MCBSP3_BASE, .virt_base = OMAP1610_MCBSP3_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 27eb6e3ca92..b261f1f80b5 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = { #ifdef CONFIG_ARCH_OMAP24XX static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { { + .phys_base = OMAP24XX_MCBSP1_BASE, .virt_base = IO_ADDRESS(OMAP24XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, @@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP24XX_MCBSP2_BASE, .virt_base = IO_ADDRESS(OMAP24XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, @@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = { #ifdef CONFIG_ARCH_OMAP34XX static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { { + .phys_base = OMAP34XX_MCBSP1_BASE, .virt_base = IO_ADDRESS(OMAP34XX_MCBSP1_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP1_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP1_TX, @@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .clk_name = "mcbsp_clk", }, { + .phys_base = OMAP34XX_MCBSP2_BASE, .virt_base = IO_ADDRESS(OMAP34XX_MCBSP2_BASE), .dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX, .dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX, diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 6eb44a92871..8fdb95e26fc 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -315,6 +315,7 @@ struct omap_mcbsp_ops { }; struct omap_mcbsp_platform_data { + unsigned long phys_base; u32 virt_base; u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; @@ -324,6 +325,7 @@ struct omap_mcbsp_platform_data { struct omap_mcbsp { struct device *dev; + unsigned long phys_base; u32 io_base; u8 id; u8 free; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index d0844050f2d..014d26574bb 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1, + mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1, 0, 0); omap_set_dma_src_params(mcbsp[id].dma_tx_lch, @@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, omap_set_dma_src_params(mcbsp[id].dma_rx_lch, src_port, OMAP_DMA_AMODE_CONSTANT, - mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1, + mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1, 0, 0); omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, @@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev) mcbsp[id].dma_tx_lch = -1; mcbsp[id].dma_rx_lch = -1; + mcbsp[id].phys_base = pdata->phys_base; mcbsp[id].io_base = pdata->virt_base; /* Default I/O is IRQ based */ mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO; From db210426d48998ed412f267b28cf6e62ea0496a8 Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Mon, 1 Sep 2008 17:28:57 -0300 Subject: [PATCH 486/638] V4L/DVB (8876): budget: udelay changed to mdelay budget.ko fails to build on ARM with: ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined! make[1]: *** [__modpost] Error 1 __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Acked-by: Oliver Endriss Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/budget-patch.c | 3 ++- drivers/media/dvb/ttpci/budget.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 39bd0a20f53..aa5ed4ef19f 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -116,7 +116,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long DiseqcSendByte(budget, 0xff); else { saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); - udelay(12500); + mdelay(12); + udelay(500); saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); } msleep(20); diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 2293d80c6e5..f0068996ac0 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -108,7 +108,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long DiseqcSendByte(budget, 0xff); else { saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); - udelay(12500); + mdelay(12); + udelay(500); saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); } msleep(20); From c4e3fd940c7081a0332e9b4ea6485744075067b0 Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Mon, 1 Sep 2008 17:32:10 -0300 Subject: [PATCH 487/638] V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelay b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with: __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 3 ++- drivers/media/dvb/bt8xx/dst.c | 4 ++-- drivers/media/video/bt8xx/bttv-cards.c | 3 ++- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index f9d087669d5..4eed783f4bc 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -137,7 +137,8 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un flexcop_diseqc_send_byte(fe, 0xff); else { flexcop_set_tone(fe, SEC_TONE_ON); - udelay(12500); + mdelay(12); + udelay(500); flexcop_set_tone(fe, SEC_TONE_OFF); } msleep(20); diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index a7637562e74..aa3db57d32d 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -1244,7 +1244,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len) goto error; } if (state->type_flags & DST_TYPE_HAS_FW_1) - udelay(3000); + mdelay(3); if (read_dst(state, &reply, GET_ACK)) { dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. "); if ((dst_error_recovery(state)) < 0) { @@ -1260,7 +1260,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len) if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3)) goto error; if (state->type_flags & DST_TYPE_HAS_FW_1) - udelay(3000); + mdelay(3); else udelay(2000); if (!dst_wait_dst_ready(state, NO_DELAY)) diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 9001de23332..6081edc362d 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4039,7 +4039,8 @@ static void __devinit boot_msp34xx(struct bttv *btv, int pin) gpio_inout(mask,mask); gpio_bits(mask,0); - udelay(2500); + mdelay(2); + udelay(500); gpio_bits(mask,mask); if (bttv_gpio) From 748c7f80acc266a54ade4d6863229402fd3cd363 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 1 Sep 2008 15:28:23 -0300 Subject: [PATCH 488/638] V4L/DVB (8880): PATCH: Fix parents on some webcam drivers While doing some testing using Luca Risolia's sonix driver I noticed that the video device did not get ACL's set to allow access by locally logged in users, nor does it show up as a video device in lshal, causing cheese to not see it. This turns out to be caused by all of Luca Risolia's drivers not setting the parent member of the video_device struct. This patch fixes this. Cc: Luca Risolia Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/et61x251/et61x251_core.c | 1 + drivers/media/video/sn9c102/sn9c102_core.c | 1 + drivers/media/video/zc0301/zc0301_core.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 2d170d101c2..8db2a05bf9c 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -2588,6 +2588,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) cam->v4ldev->fops = &et61x251_fops; cam->v4ldev->minor = video_nr[dev_nr]; cam->v4ldev->release = video_device_release; + cam->v4ldev->parent = &udev->dev; video_set_drvdata(cam->v4ldev, cam); init_completion(&cam->probe); diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 23408764d0e..2da6938718f 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -3312,6 +3312,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) cam->v4ldev->fops = &sn9c102_fops; cam->v4ldev->minor = video_nr[dev_nr]; cam->v4ldev->release = video_device_release; + cam->v4ldev->parent = &udev->dev; init_completion(&cam->probe); diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 550ce7bd5c8..0c3287734c9 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -1988,6 +1988,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) cam->v4ldev->fops = &zc0301_fops; cam->v4ldev->minor = video_nr[dev_nr]; cam->v4ldev->release = video_device_release; + cam->v4ldev->parent = &udev->dev; video_set_drvdata(cam->v4ldev, cam); init_completion(&cam->probe); From 8561098ff11d21f1a6a9a01fae2e68653928dbb5 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 2 Sep 2008 07:02:50 -0300 Subject: [PATCH 489/638] V4L/DVB (8881): gspca: After 'while (retry--) {...}', retry will be -1 but not 0. Signed-off-by: Li Zefan Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 4 ++-- drivers/media/video/gspca/spca561.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 8c91ffde953..4d9f4cc255a 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -731,13 +731,13 @@ static void cx11646_jpeg(struct gspca_dev*gspca_dev) reg_w_val(gspca_dev, 0x0000, 0x00); /* wait for completion */ retry = 50; - while (retry--) { + do { reg_r(gspca_dev, 0x0002, 1); /* 0x07 until 0x00 */ if (gspca_dev->usb_buf[0] == 0x00) break; reg_w_val(gspca_dev, 0x0053, 0x00); - } + } while (--retry); if (retry == 0) PDEBUG(D_ERR, "Damned Errors sending jpeg Table"); /* send the qtable now */ diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 1c29c279a98..cfbc9ebc5c5 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -223,11 +223,11 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode) reg_w_val(gspca_dev->dev, 0x8804, 0x92); reg_w_val(gspca_dev->dev, 0x8801, reg); reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01)); - while (retry--) { + do { reg_r(gspca_dev, 0x8803, 1); if (!gspca_dev->usb_buf) break; - } + } while (--retry); if (retry == 0) return -1; reg_r(gspca_dev, 0x8800, 1); From 9f43e3914dceb0f8191875b3cdf4325b48d0d70a Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 2 Sep 2008 11:57:09 +1000 Subject: [PATCH 490/638] powerpc/spufs: Fix multiple get_spu_context() Commit 8d5636fbca202f61fdb808fc9e20c0142291d802 introduced a reference count on SPU contexts during find_victim, but this may cause a leak in the reference count if we later find a better contender for a context to unschedule. Change the reference to after we've found our victim context, so we don't do the extra get_spu_context(). Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 1c1b627ee84..9bb45c6b839 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx) !(tmp->flags & SPU_CREATE_NOSCHED) && (!victim || tmp->prio > victim->prio)) { victim = spu->ctx; - get_spu_context(victim); } } + if (victim) + get_spu_context(victim); mutex_unlock(&cbe_spu_info[node].list_mutex); if (victim) { From b65fe0356b5b732d7e1e0224c6a1cf2eb5255984 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Thu, 4 Sep 2008 15:02:47 +1000 Subject: [PATCH 491/638] powerpc/spufs: Fix race for a free SPU We currently have a race for a free SPE. With one thread doing a spu_yield(), and another doing a spu_activate(): thread 1 thread 2 spu_yield(oldctx) spu_activate(ctx) __spu_deactivate(oldctx) spu_unschedule(oldctx, spu) spu->alloc_state = SPU_FREE spu = spu_get_idle(ctx) - searches for a SPE in state SPU_FREE, gets the context just freed by thread 1 spu_schedule(ctx, spu) spu->alloc_state = SPU_USED spu_schedule(newctx, spu) - assumes spu is still free - tries to schedule context on already-used spu This change introduces a 'free_spu' flag to spu_unschedule, to indicate whether or not the function should free the spu after descheduling the context. We only set this flag if we're not going to re-schedule another context on this SPU. Add a comment to document this behaviour. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 9bb45c6b839..897c7406116 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -732,13 +732,28 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx) spu_release(ctx); } -static void spu_unschedule(struct spu *spu, struct spu_context *ctx) +/** + * spu_unschedule - remove a context from a spu, and possibly release it. + * @spu: The SPU to unschedule from + * @ctx: The context currently scheduled on the SPU + * @free_spu Whether to free the SPU for other contexts + * + * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the + * SPU is made available for other contexts (ie, may be returned by + * spu_get_idle). If this is zero, the caller is expected to schedule another + * context to this spu. + * + * Should be called with ctx->state_mutex held. + */ +static void spu_unschedule(struct spu *spu, struct spu_context *ctx, + int free_spu) { int node = spu->node; mutex_lock(&cbe_spu_info[node].list_mutex); cbe_spu_info[node].nr_active--; - spu->alloc_state = SPU_FREE; + if (free_spu) + spu->alloc_state = SPU_FREE; spu_unbind_context(spu, ctx); ctx->stats.invol_ctx_switch++; spu->stats.invol_ctx_switch++; @@ -838,7 +853,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio) if (spu) { new = grab_runnable_context(max_prio, spu->node); if (new || force) { - spu_unschedule(spu, ctx); + spu_unschedule(spu, ctx, new == NULL); if (new) { if (new->flags & SPU_CREATE_NOSCHED) wake_up(&new->stop_wq); @@ -911,7 +926,7 @@ static noinline void spusched_tick(struct spu_context *ctx) new = grab_runnable_context(ctx->prio + 1, spu->node); if (new) { - spu_unschedule(spu, ctx); + spu_unschedule(spu, ctx, 0); if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags)) spu_add_to_rq(ctx); } else { From 158e0fb6028a2329425d8287b1b2402a12ed4f28 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 4 Sep 2008 22:20:10 -0400 Subject: [PATCH 492/638] Input: bcm5974 - small formatting cleanup Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 2ec921bf3c6..ae78bb833f6 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -63,7 +63,7 @@ } /* table of devices that work with this driver */ -static const struct usb_device_id bcm5974_table [] = { +static const struct usb_device_id bcm5974_table[] = { /* MacbookAir1.1 */ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO), From 75e21e3f3bb2b4a41bb0646a4d54eef27eb36ca5 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 4 Sep 2008 22:28:23 -0400 Subject: [PATCH 493/638] Input: bcm5974 - improve finger tracking and counting The problem of finger tracking, i.e., when to switch focus from one finger to another on the trackpad, has been improved by utilizing more information from the bcm5974 chip output. This results in less pointer hopping when many fingers are on the trackpad. In addition, a finger counting method based on pressure information from all fingers is introduced. Together with a pressure hysteresis window, this yields a more stable counting of the number of fingers on the trackpad. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 70 +++++++++++++++++++++++++++-------- 1 file changed, 54 insertions(+), 16 deletions(-) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index ae78bb833f6..8568211c556 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -105,7 +105,7 @@ struct tp_header { /* trackpad finger structure */ struct tp_finger { - __le16 origin; /* left/right origin? */ + __le16 origin; /* zero when switching track finger */ __le16 abs_x; /* absolute x coodinate */ __le16 abs_y; /* absolute y coodinate */ __le16 rel_x; /* relative x coodinate */ @@ -159,6 +159,7 @@ struct bcm5974 { struct bt_data *bt_data; /* button transferred data */ struct urb *tp_urb; /* trackpad usb request block */ struct tp_data *tp_data; /* trackpad transferred data */ + int fingers; /* number of fingers on trackpad */ }; /* logical dimensions */ @@ -172,6 +173,10 @@ struct bcm5974 { #define SN_WIDTH 100 /* width signal-to-noise ratio */ #define SN_COORD 250 /* coordinate signal-to-noise ratio */ +/* pressure thresholds */ +#define PRESSURE_LOW (2 * DIM_PRESSURE / SN_PRESSURE) +#define PRESSURE_HIGH (3 * PRESSURE_LOW) + /* device constants */ static const struct bcm5974_config bcm5974_config_table[] = { { @@ -273,32 +278,65 @@ static int report_tp_state(struct bcm5974 *dev, int size) const struct tp_finger *f = dev->tp_data->finger; struct input_dev *input = dev->input; const int fingers = (size - 26) / 28; - int p = 0, w, x, y, n = 0; + int raw_p, raw_w, raw_x, raw_y; + int ptest = 0, origin = 0, nmin = 0, nmax = 0; + int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; if (size < 26 || (size - 26) % 28 != 0) return -EIO; + /* always track the first finger; when detached, start over */ if (fingers) { - p = raw2int(f->force_major); - w = raw2int(f->size_major); - x = raw2int(f->abs_x); - y = raw2int(f->abs_y); - n = p > 0 ? fingers : 0; + raw_p = raw2int(f->force_major); + raw_w = raw2int(f->size_major); + raw_x = raw2int(f->abs_x); + raw_y = raw2int(f->abs_y); dprintk(9, - "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", - p, w, x, y, n); + "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n", + raw_p, raw_w, raw_x, raw_y); - input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w)); - input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin)); - input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y)); + ptest = int2bound(&c->p, raw_p); + origin = raw2int(f->origin); } - input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p)); + /* while tracking finger still valid, count all fingers */ + if (ptest > PRESSURE_LOW && origin) { + abs_p = ptest; + abs_w = int2bound(&c->w, raw_w); + abs_x = int2bound(&c->x, raw_x - c->x.devmin); + abs_y = int2bound(&c->y, c->y.devmax - raw_y); + for (; f != dev->tp_data->finger + fingers; f++) { + ptest = int2bound(&c->p, raw2int(f->force_major)); + if (ptest > PRESSURE_LOW) + nmax++; + if (ptest > PRESSURE_HIGH) + nmin++; + } + } - input_report_key(input, BTN_TOOL_FINGER, n == 1); - input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2); - input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2); + if (dev->fingers < nmin) + dev->fingers = nmin; + if (dev->fingers > nmax) + dev->fingers = nmax; + + input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); + + input_report_abs(input, ABS_PRESSURE, abs_p); + input_report_abs(input, ABS_TOOL_WIDTH, abs_w); + + if (abs_p) { + input_report_abs(input, ABS_X, abs_x); + input_report_abs(input, ABS_Y, abs_y); + + dprintk(8, + "bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d " + "nmin: %d nmax: %d n: %d\n", + abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers); + + } input_sync(input); From a6821f345fd508b17f5ce310b677b37aefb028dc Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Thu, 4 Sep 2008 22:28:31 -0400 Subject: [PATCH 494/638] Input: bcm5974 - add BTN_TOUCH event for mousedev benefit The mousedev driver requires the use of BTN_TOUCH events to process ABS_X and ABS_Y events properly, which is what is needed for the bcm5974-based apple computers to have a functional pointer out-of-the-box. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 8568211c556..18f4d7f6ce6 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -253,6 +253,7 @@ static void setup_events_to_report(struct input_dev *input_dev, 0, cfg->y.dim, cfg->y.fuzz, 0); __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(BTN_TOOL_FINGER, input_dev->keybit); __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); @@ -320,6 +321,7 @@ static int report_tp_state(struct bcm5974 *dev, int size) if (dev->fingers > nmax) dev->fingers = nmax; + input_report_key(input, BTN_TOUCH, dev->fingers > 0); input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1); input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2); input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2); From 9ce1ca284a322ba6f9d691136a29c9cfe381e1fc Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 4 Sep 2008 22:28:48 -0400 Subject: [PATCH 495/638] Input: i8042 - make Lenovo 3000 N100 blacklist entry more specific Apparently, there are more different versions of Lenovo 3000 N100, some of them working properly with active mux, and some of them requiring it being switched off. This patch applies 'nomux' only to the specific product name that is reported to behave badly unless 'nomux' is specified. Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 3282b741e24..5aafe24984c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -305,7 +305,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { .ident = "Lenovo 3000 n100", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), + DMI_MATCH(DMI_PRODUCT_NAME, "076804U"), }, }, { From 323b8c410a2453f15578c22b0eef50456359bbfc Mon Sep 17 00:00:00 2001 From: Carmelo Amoroso Date: Fri, 5 Sep 2008 14:42:16 +0900 Subject: [PATCH 496/638] sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y. This patch fixes a problem within the SH implementation of resume_kernel code, that implements in assembly the bulk of preempt_schedule_irq function without taking care of the extra code needed to handle the BKL preemptible. The patch basically consists of removing this asm code and calling the common C implementation (see kernel/sched.c) as other archs do. Another change is the missing 'cli' macro invocation at the beginning of the resume_kernel. Signed-off-by: Giuseppe Cavallaro Signed-off-by: Carmelo Amoroso Signed-off-by: Paul Mundt --- arch/sh/kernel/entry-common.S | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 0bc17def55a..efbb4268875 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -92,6 +92,7 @@ ENTRY(ret_from_irq) bra resume_userspace nop ENTRY(resume_kernel) + cli mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count tst r0, r0 bf noresched @@ -105,28 +106,9 @@ need_resched: and #0xf0, r0 ! interrupts off (exception path)? cmp/eq #0xf0, r0 bt noresched - - mov.l 1f, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - -#ifdef CONFIG_TRACE_IRQFLAGS mov.l 3f, r0 - jsr @r0 + jsr @r0 ! call preempt_schedule_irq nop -#endif - sti - mov.l 2f, r0 - jsr @r0 - nop - mov #0, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - cli -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 4f, r0 - jsr @r0 - nop -#endif - bra need_resched nop @@ -137,10 +119,7 @@ noresched: .align 2 1: .long PREEMPT_ACTIVE 2: .long schedule -#ifdef CONFIG_TRACE_IRQFLAGS -3: .long trace_hardirqs_on -4: .long trace_hardirqs_off -#endif +3: .long preempt_schedule_irq #endif ENTRY(resume_userspace) From dbce1f649e3d22aa7ddc0fdbfa6a7470047b61bd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 5 Sep 2008 14:51:28 +0900 Subject: [PATCH 497/638] sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y. Follows the SH change. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh5/entry.S | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 04c7da96814..e640c63d581 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -2,7 +2,7 @@ * arch/sh/kernel/cpu/sh5/entry.S * * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2004 - 2008 Paul Mundt * Copyright (C) 2003, 2004 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -923,6 +923,8 @@ ret_from_exception: blink tr0, ZERO resume_kernel: + CLI() + pta restore_all, tr0 getcon KCR0, r6 @@ -939,19 +941,11 @@ need_resched: andi r7, 0xf0, r7 bne r7, ZERO, tr0 - movi ((PREEMPT_ACTIVE >> 16) & 65535), r8 - shori (PREEMPT_ACTIVE & 65535), r8 - st.l r6, TI_PRE_COUNT, r8 - - STI() - movi schedule, r7 + movi preempt_schedule_irq, r7 ori r7, 1, r7 ptabs r7, tr1 blink tr1, LINK - st.l r6, TI_PRE_COUNT, ZERO - CLI() - pta need_resched, tr1 blink tr1, ZERO #endif From 4eb00c9f92202a759aadbce73ea4a947b639b5e6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 27 Aug 2008 18:33:56 +0900 Subject: [PATCH 498/638] i2c: fix i2c-sh_mobile timing issues This patch teaches the i2c-sh_mobile driver to make use of wait irqs. Without this patch only dte irqs are used which may lead to overruns and cases of missing stop and extra bytes being read on the i2c bus. Use of wait irqs forces the hardware to pause and wait until the cpu is ready. Polling is also reworked in this patch to fix ms delay issues. Verified with bus analyzer and tested on MigoR and AP325RXA boards. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/i2c/busses/i2c-sh_mobile.c | 271 ++++++++++++++++++++++------- 1 file changed, 208 insertions(+), 63 deletions(-) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 840e634fa31..640cbb23732 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -31,13 +31,84 @@ #include #include +/* Transmit operation: */ +/* */ +/* 0 byte transmit */ +/* BUS: S A8 ACK P */ +/* IRQ: DTE WAIT */ +/* ICIC: */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 */ +/* */ +/* 1 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK P */ +/* IRQ: DTE WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) */ +/* */ +/* 2 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) D8(2) */ +/* */ +/* 3 bytes or more, +---------+ gets repeated */ +/* */ +/* */ +/* Receive operation: */ +/* */ +/* 0 byte receive - not supported since slave may hold SDA low */ +/* */ +/* 1 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK P */ +/* IRQ: DTE WAIT | WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) */ +/* */ +/* 2 byte receive [TX]| [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) */ +/* */ +/* 3 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) D8(3) */ +/* */ +/* 4 bytes or more, this part is repeated +---------+ */ +/* */ +/* */ +/* Interrupt order and BUSY flag */ +/* ___ _ */ +/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */ +/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */ +/* */ +/* S D7 D6 D5 D4 D3 D2 D1 D0 P */ +/* ___ */ +/* WAIT IRQ ________________________________/ \___________ */ +/* TACK IRQ ____________________________________/ \_______ */ +/* DTE IRQ __________________________________________/ \_ */ +/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ +/* _______________________________________________ */ +/* BUSY __/ \_ */ +/* */ + enum sh_mobile_i2c_op { OP_START = 0, - OP_TX_ONLY, + OP_TX_FIRST, + OP_TX, OP_TX_STOP, OP_TX_TO_RX, - OP_RX_ONLY, + OP_RX, OP_RX_STOP, + OP_RX_STOP_DATA, }; struct sh_mobile_i2c_data { @@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, spin_lock_irqsave(&pd->lock, flags); switch (op) { - case OP_START: + case OP_START: /* issue start and trigger DTE interrupt */ iowrite8(0x94, ICCR(pd)); break; - case OP_TX_ONLY: + case OP_TX_FIRST: /* disable DTE interrupt and write data */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd)); iowrite8(data, ICDR(pd)); break; - case OP_TX_STOP: + case OP_TX: /* write data */ + iowrite8(data, ICDR(pd)); + break; + case OP_TX_STOP: /* write data and issue a stop afterwards */ iowrite8(data, ICDR(pd)); iowrite8(0x90, ICCR(pd)); - iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd)); break; - case OP_TX_TO_RX: - iowrite8(data, ICDR(pd)); + case OP_TX_TO_RX: /* select read mode */ iowrite8(0x81, ICCR(pd)); break; - case OP_RX_ONLY: + case OP_RX: /* just read data */ ret = ioread8(ICDR(pd)); break; - case OP_RX_STOP: + case OP_RX_STOP: /* enable DTE interrupt, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); + iowrite8(0xc0, ICCR(pd)); + break; + case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); ret = ioread8(ICDR(pd)); iowrite8(0xc0, ICCR(pd)); break; @@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, return ret; } +static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == -1) + return 1; + + return 0; +} + +static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == (pd->msg->len - 1)) + return 1; + + return 0; +} + +static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, + unsigned char *buf) +{ + switch (pd->pos) { + case -1: + *buf = (pd->msg->addr & 0x7f) << 1; + *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0; + break; + default: + *buf = pd->msg->buf[pd->pos]; + } +} + +static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + + if (pd->pos == pd->msg->len) + return 1; + + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_last_byte(pd)) + i2c_op(pd, OP_TX_STOP, data); + else if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + + pd->pos++; + return 0; +} + +static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + int real_pos; + + do { + if (pd->pos <= -1) { + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + break; + } + + if (pd->pos == 0) { + i2c_op(pd, OP_TX_TO_RX, 0); + break; + } + + real_pos = pd->pos - 2; + + if (pd->pos == pd->msg->len) { + if (real_pos < 0) { + i2c_op(pd, OP_RX_STOP, 0); + break; + } + data = i2c_op(pd, OP_RX_STOP_DATA, 0); + } else + data = i2c_op(pd, OP_RX, 0); + + pd->msg->buf[real_pos] = data; + } while (0); + + pd->pos++; + return pd->pos == (pd->msg->len + 2); +} + static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) { struct platform_device *dev = dev_id; struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); - struct i2c_msg *msg = pd->msg; - unsigned char data, sr; - int wakeup = 0; + unsigned char sr; + int wakeup; sr = ioread8(ICSR(pd)); - pd->sr |= sr; + pd->sr |= sr; /* remember state */ dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, - (msg->flags & I2C_M_RD) ? "read" : "write", - pd->pos, msg->len); + (pd->msg->flags & I2C_M_RD) ? "read" : "write", + pd->pos, pd->msg->len); if (sr & (ICSR_AL | ICSR_TACK)) { - iowrite8(0, ICIC(pd)); /* disable interrupts */ - wakeup = 1; - goto do_wakeup; - } + /* don't interrupt transaction - continue to issue stop */ + iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd)); + wakeup = 0; + } else if (pd->msg->flags & I2C_M_RD) + wakeup = sh_mobile_i2c_isr_rx(pd); + else + wakeup = sh_mobile_i2c_isr_tx(pd); - if (pd->pos == msg->len) { - i2c_op(pd, OP_RX_ONLY, 0); - wakeup = 1; - goto do_wakeup; - } + if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */ + iowrite8(sr & ~ICSR_WAIT, ICSR(pd)); - if (pd->pos == -1) { - data = (msg->addr & 0x7f) << 1; - data |= (msg->flags & I2C_M_RD) ? 1 : 0; - } else - data = msg->buf[pd->pos]; - - if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) { - if (msg->flags & I2C_M_RD) - i2c_op(pd, OP_TX_TO_RX, data); - else if (pd->pos == (msg->len - 1)) { - i2c_op(pd, OP_TX_STOP, data); - wakeup = 1; - } else - i2c_op(pd, OP_TX_ONLY, data); - } else { - if (pd->pos == (msg->len - 1)) - data = i2c_op(pd, OP_RX_STOP, 0); - else - data = i2c_op(pd, OP_RX_ONLY, 0); - - msg->buf[pd->pos] = data; - } - pd->pos++; - - do_wakeup: if (wakeup) { pd->sr |= SW_DONE; wake_up(&pd->wait); @@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) { + if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) { + dev_err(pd->dev, "Unsupported zero length i2c read\n"); + return -EIO; + } + /* Initialize channel registers */ iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); @@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) pd->pos = -1; pd->sr = 0; - /* Enable all interrupts except wait */ - iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, - ICIC(pd)); + /* Enable all interrupts to begin with */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd)); return 0; } @@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, if (!k) dev_err(pd->dev, "Transfer request timed out\n"); - retry_count = 10; + retry_count = 1000; again: val = ioread8(ICSR(pd)); dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); - if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { - err = -EIO; - break; - } - /* the interrupt handler may wake us up before the * transfer is finished, so poll the hardware * until we're done. */ - - if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) && - (val & ICSR_SDAM))) { - msleep(1); + if (val & ICSR_BUSY) { + udelay(10); if (retry_count--) goto again; @@ -294,6 +433,12 @@ again: dev_err(pd->dev, "Polling timed out\n"); break; } + + /* handle missing acknowledge and arbitration lost */ + if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { + err = -EIO; + break; + } } deactivate_ch(pd); From 7c1e76897492d92b6a1c2d6892494d39ded9680c Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Wed, 3 Sep 2008 21:36:50 +0000 Subject: [PATCH 499/638] clockevents: prevent clockevent event_handler ending up handler_noop There is a ordering related problem with clockevents code, due to which clockevents_register_device() called after tickless/highres switch will not work. The new clockevent ends up with clockevents_handle_noop as event handler, resulting in no timer activity. The problematic path seems to be * old device already has hrtimer_interrupt as the event_handler * new clockevent device registers with a higher rating * tick_check_new_device() is called * clockevents_exchange_device() gets called * old->event_handler is set to clockevents_handle_noop * tick_setup_device() is called for the new device * which sets new->event_handler using the old->event_handler which is noop. Change the ordering so that new device inherits the proper handler. This does not have any issue in normal case as most likely all the clockevent devices are setup before the highres switch. But, can potentially be affecting some corner case where HPET force detect happens after the highres switch. This was a problem with HPET in MSI mode code that we have been experimenting with. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Shaohua Li Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/linux/clockchips.h | 2 ++ kernel/time/clockevents.c | 3 +-- kernel/time/tick-common.c | 1 + 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index c33b0dc28e4..ed3a5d473e5 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -127,6 +127,8 @@ extern int clockevents_register_notifier(struct notifier_block *nb); extern int clockevents_program_event(struct clock_event_device *dev, ktime_t expires, ktime_t now); +extern void clockevents_handle_noop(struct clock_event_device *dev); + #ifdef CONFIG_GENERIC_CLOCKEVENTS extern void clockevents_notify(unsigned long reason, void *arg); #else diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index 3d1e3e1a197..1876b526c77 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -177,7 +177,7 @@ void clockevents_register_device(struct clock_event_device *dev) /* * Noop handler when we shut down an event device */ -static void clockevents_handle_noop(struct clock_event_device *dev) +void clockevents_handle_noop(struct clock_event_device *dev) { } @@ -199,7 +199,6 @@ void clockevents_exchange_device(struct clock_event_device *old, * released list and do a notify add later. */ if (old) { - old->event_handler = clockevents_handle_noop; clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED); list_del(&old->list); list_add(&old->list, &clockevents_released); diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 80c4336f418..c4777193d56 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -161,6 +161,7 @@ static void tick_setup_device(struct tick_device *td, } else { handler = td->evtdev->event_handler; next_event = td->evtdev->next_event; + td->evtdev->event_handler = clockevents_handle_noop; } td->evtdev = newdev; From d4496b39559c6d43f83e4c08b899984f8b8089b5 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:36:57 +0000 Subject: [PATCH 500/638] clockevents: prevent endless loop in periodic broadcast handler The reprogramming of the periodic broadcast handler was broken, when the first programming returned -ETIME. The clockevents code stores the new expiry value in the clock events device next_event field only when the programming time has not been elapsed yet. The loop in question calculates the new expiry value from the next_event value and therefor never increases. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 31463d370b9..3044a88357f 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -175,6 +175,8 @@ static void tick_do_periodic_broadcast(void) */ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) { + ktime_t next; + tick_do_periodic_broadcast(); /* @@ -185,10 +187,13 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) /* * Setup the next period for devices, which do not have - * periodic mode: + * periodic mode. We read dev->next_event first and add to it + * when the event alrady expired. clockevents_program_event() + * sets dev->next_event only when the event is really + * programmed to the device. */ - for (;;) { - ktime_t next = ktime_add(dev->next_event, tick_period); + for (next = dev->next_event; ;) { + next = ktime_add(next, tick_period); if (!clockevents_program_event(dev, next, ktime_get())) return; From 7205656ab48da29a95d7f55e43a81db755d3cb3a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:03 +0000 Subject: [PATCH 501/638] clockevents: enforce reprogram in oneshot setup In tick_oneshot_setup we program the device to the given next_event, but we do not check the return value. We need to make sure that the device is programmed enforced so the interrupt handler engine starts working. Split out the reprogramming function from tick_program_event() and call it with the device, which was handed in to tick_setup_oneshot(). Set the force argument, so the devices is firing an interrupt. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-oneshot.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 450c04935b6..06595c64b0c 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -23,11 +23,11 @@ #include "tick-internal.h" /** - * tick_program_event + * tick_program_event internal worker function */ -int tick_program_event(ktime_t expires, int force) +static int __tick_program_event(struct clock_event_device *dev, + ktime_t expires, int force) { - struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; ktime_t now = ktime_get(); while (1) { @@ -40,6 +40,16 @@ int tick_program_event(ktime_t expires, int force) } } +/** + * tick_program_event + */ +int tick_program_event(ktime_t expires, int force) +{ + struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; + + return __tick_program_event(dev, expires, force); +} + /** * tick_resume_onshot - resume oneshot mode */ @@ -61,7 +71,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev, { newdev->event_handler = handler; clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT); - clockevents_program_event(newdev, next_event, ktime_get()); + __tick_program_event(newdev, next_event, 1); } /** From 9c17bcda991000351cb2373f78be7e4b1c44caa3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:08 +0000 Subject: [PATCH 502/638] clockevents: prevent multiple init/shutdown While chasing the C1E/HPET bugreports I went through the clock events code inch by inch and found that the broadcast device can be initialized and shutdown multiple times. Multiple shutdowns are not critical, but useless waste of time. Multiple initializations are simply broken. Another CPU might have the device in use already after the first initialization and the second init could just render it unusable again. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 3044a88357f..5744f40b269 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -210,7 +210,7 @@ static void tick_do_broadcast_on_off(void *why) struct clock_event_device *bc, *dev; struct tick_device *td; unsigned long flags, *reason = why; - int cpu; + int cpu, bc_stopped; spin_lock_irqsave(&tick_broadcast_lock, flags); @@ -228,6 +228,8 @@ static void tick_do_broadcast_on_off(void *why) if (!tick_device_is_functional(dev)) goto out; + bc_stopped = cpus_empty(tick_broadcast_mask); + switch (*reason) { case CLOCK_EVT_NOTIFY_BROADCAST_ON: case CLOCK_EVT_NOTIFY_BROADCAST_FORCE: @@ -250,9 +252,10 @@ static void tick_do_broadcast_on_off(void *why) break; } - if (cpus_empty(tick_broadcast_mask)) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); - else { + if (cpus_empty(tick_broadcast_mask)) { + if (!bc_stopped) + clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); + } else if (bc_stopped) { if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) tick_broadcast_start_periodic(bc); else @@ -501,9 +504,12 @@ static void tick_broadcast_clear_oneshot(int cpu) */ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { - bc->event_handler = tick_handle_oneshot_broadcast; - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - bc->next_event.tv64 = KTIME_MAX; + /* Set it up only once ! */ + if (bc->event_handler != tick_handle_oneshot_broadcast) { + bc->event_handler = tick_handle_oneshot_broadcast; + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); + bc->next_event.tv64 = KTIME_MAX; + } } /* From 1fb9b7d29d8e85ba3196eaa7ab871bf76fc98d36 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:14 +0000 Subject: [PATCH 503/638] clockevents: prevent endless loop lockup The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a too small value of the HPET minumum delta for programming an event. The clockevents code needs to enforce an interrupt event on the clock event device in some cases. The enforcement code was stupid and naive, as it just added the minimum delta to the current time and tried to reprogram the device. When the minimum delta is too small, then this loops forever. Add a sanity check. Allow reprogramming to fail 3 times, then print a warning and double the minimum delta value to make sure, that this does not happen again. Use the same function for both tick-oneshot and tick-broadcast code. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 10 +--------- kernel/time/tick-internal.h | 2 ++ kernel/time/tick-oneshot.c | 36 ++++++++++++++++++++++++++++++------ 3 files changed, 33 insertions(+), 15 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 5744f40b269..2bc1f046151 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -372,16 +372,8 @@ cpumask_t *tick_get_broadcast_oneshot_mask(void) static int tick_broadcast_set_event(ktime_t expires, int force) { struct clock_event_device *bc = tick_broadcast_device.evtdev; - ktime_t now = ktime_get(); - int res; - for(;;) { - res = clockevents_program_event(bc, expires, now); - if (!res || !force) - return res; - now = ktime_get(); - expires = ktime_add(now, ktime_set(0, bc->min_delta_ns)); - } + return tick_dev_program_event(bc, expires, force); } int tick_resume_broadcast_oneshot(struct clock_event_device *bc) diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index f13f2b7f4fd..0ffc2918ea6 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -17,6 +17,8 @@ extern void tick_handle_periodic(struct clock_event_device *dev); extern void tick_setup_oneshot(struct clock_event_device *newdev, void (*handler)(struct clock_event_device *), ktime_t nextevt); +extern int tick_dev_program_event(struct clock_event_device *dev, + ktime_t expires, int force); extern int tick_program_event(ktime_t expires, int force); extern void tick_oneshot_notify(void); extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *)); diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 06595c64b0c..2e35501e61d 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -25,18 +25,42 @@ /** * tick_program_event internal worker function */ -static int __tick_program_event(struct clock_event_device *dev, - ktime_t expires, int force) +int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires, + int force) { ktime_t now = ktime_get(); + int i; - while (1) { + for (i = 0;;) { int ret = clockevents_program_event(dev, expires, now); if (!ret || !force) return ret; + + /* + * We tried 2 times to program the device with the given + * min_delta_ns. If that's not working then we double it + * and emit a warning. + */ + if (++i > 2) { + printk(KERN_WARNING "CE: __tick_program_event of %s is " + "stuck %llx %llx\n", dev->name ? dev->name : "?", + now.tv64, expires.tv64); + printk(KERN_WARNING + "CE: increasing min_delta_ns %ld to %ld nsec\n", + dev->min_delta_ns, dev->min_delta_ns << 1); + WARN_ON(1); + + /* Double the min. delta and try again */ + if (!dev->min_delta_ns) + dev->min_delta_ns = 5000; + else + dev->min_delta_ns <<= 1; + i = 0; + } + now = ktime_get(); - expires = ktime_add(now, ktime_set(0, dev->min_delta_ns)); + expires = ktime_add_ns(now, dev->min_delta_ns); } } @@ -47,7 +71,7 @@ int tick_program_event(ktime_t expires, int force) { struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev; - return __tick_program_event(dev, expires, force); + return tick_dev_program_event(dev, expires, force); } /** @@ -71,7 +95,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev, { newdev->event_handler = handler; clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT); - __tick_program_event(newdev, next_event, 1); + tick_dev_program_event(newdev, next_event, 1); } /** From 7cfb0435330364f90f274a26ecdc5f47f738498c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 3 Sep 2008 21:37:24 +0000 Subject: [PATCH 504/638] HPET: make minimum reprogramming delta useful The minimum reprogramming delta was hardcoded in HPET ticks, which is stupid as it does not work with faster running HPETs. The C1E idle patches made this prominent on AMD/RS690 chipsets, where the HPET runs with 25MHz. Set it to 5us which seems to be a reasonable value and fixes the problems on the bug reporters machines. We have a further sanity check now in the clock events, which increases the delta when it is not sufficient. Signed-off-by: Thomas Gleixner Tested-by: Luiz Fernando N. Capitulino Tested-by: Dmitry Nezhevenko Signed-off-by: Ingo Molnar --- arch/x86/kernel/hpet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 59fd3b6b130..2256315416d 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void) /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30, - &hpet_clockevent); + /* 5 usec minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = 5000; /* * Start hpet with the boot cpu mask and make it From 076c7f4c6c55c37975c8e04ae6827267794d5d2e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Sep 2008 13:28:33 +0400 Subject: [PATCH 505/638] [MTD] [NAND] tmio_nand: fix base address programming Fix offset of second word used for programming base address of memory window. Also program tmio with offset of the FCR, not with physical memory location. Signed-off-by: Dmitry Baryshkov Cc: Ian Molton Signed-off-by: David Woodhouse --- drivers/mtd/nand/tmio_nand.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index cbab654b03c..edb1e322113 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -109,7 +109,7 @@ struct tmio_nand { void __iomem *ccr; void __iomem *fcr; - unsigned long fcr_phys; + unsigned long fcr_base; unsigned int irq; @@ -316,8 +316,8 @@ static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio) tmio_iowrite8(0x81, tmio->ccr + CCR_ICC); /* (10h)BaseAddress 0x1000 spba.spba2 */ - tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE); - tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16); + tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE); + tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2); /* (04h)Command Register I/O spcmd */ tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND); @@ -395,7 +395,7 @@ static int tmio_probe(struct platform_device *dev) goto err_iomap_ccr; } - tmio->fcr_phys = (unsigned long)fcr->start; + tmio->fcr_base = fcr->start & 0xfffff; tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1); if (!tmio->fcr) { retval = -EIO; From afbc8d8e72daa5a5faf6a0242186bdfcc42b2427 Mon Sep 17 00:00:00 2001 From: Khem Raj Date: Thu, 4 Sep 2008 23:11:01 -0700 Subject: [PATCH 506/638] Fix conditional export of kvh.h and a.out.h to userspace. Some architectures have moved the asm/ into arch/ and some have not. This patch checks for a.out.h and kvh.h in both places before exporting the corresponding file from linux/ [dwmw2: simplified a little] Signed-off-by: Khem Raj Signed-off-by: David Woodhouse --- include/asm-generic/Kbuild.asm | 6 ++++-- include/linux/Kbuild | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm index 1170dc60e63..1870d5e05f1 100644 --- a/include/asm-generic/Kbuild.asm +++ b/include/asm-generic/Kbuild.asm @@ -1,8 +1,10 @@ -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ + $(srctree)/include/asm-$(SRCARCH)/kvm.h),) header-y += kvm.h endif -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ + $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += auxvec.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 59391250d51..b68ec09399b 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -167,7 +167,8 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ + $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += apm_bios.h @@ -258,7 +259,8 @@ unifdef-y += kd.h unifdef-y += kernelcapi.h unifdef-y += kernel.h unifdef-y += keyboard.h -ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),) +ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ + $(srctree)/include/asm-$(SRCARCH)/kvm.h),) unifdef-y += kvm.h endif unifdef-y += llc.h From de24125dd0a452bfd4502fc448e3534c5d2e87aa Mon Sep 17 00:00:00 2001 From: Yuri Tikhonov Date: Fri, 5 Sep 2008 08:15:47 -0700 Subject: [PATCH 507/638] async_tx: fix the bug in async_tx_run_dependencies Should clear the next pointer of the TX if we are sure that the next TX (say NXT) will be submitted to the channel too. Overwise, we break the chain of descriptors, because we lose the information about the next descriptor to run. So next time, when invoke async_tx_run_dependencies() with TX, it's TX->next will be NULL, and NXT will be never submitted. Cc: [2.6.26] Signed-off-by: Yuri Tikhonov Signed-off-by: Ilya Yanok Signed-off-by: Dan Williams --- crypto/async_tx/async_tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c index 85eaf7b1c53..e8362c1efa3 100644 --- a/crypto/async_tx/async_tx.c +++ b/crypto/async_tx/async_tx.c @@ -137,7 +137,8 @@ async_tx_run_dependencies(struct dma_async_tx_descriptor *tx) spin_lock_bh(&next->lock); next->parent = NULL; _next = next->next; - next->next = NULL; + if (_next && _next->chan == chan) + next->next = NULL; spin_unlock_bh(&next->lock); next->tx_submit(next); From b35de672e74ceea6482b4f690ad053aec8465c5d Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 5 Sep 2008 16:01:15 +0100 Subject: [PATCH 508/638] Revert "[ARM] use the new byteorder headers" This reverts commit ae82cbfc8beaa69007aa09966d3983ac938c3577. It needs the new byteorder headers to be exported to userspace, and they aren't yet -- and probably shouldn't be, at this point in the 2.6.27 release cycle (or ever, for that matter). Signed-off-by: David Woodhouse Acked-by: Russell King --- arch/arm/include/asm/byteorder.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h index d04a7a2bc2e..4fbfb22f65a 100644 --- a/arch/arm/include/asm/byteorder.h +++ b/arch/arm/include/asm/byteorder.h @@ -18,15 +18,7 @@ #include #include -#ifdef __ARMEB__ -# define __BIG_ENDIAN -#else -# define __LITTLE_ENDIAN -#endif - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 t; @@ -48,8 +40,19 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) return x; } -#define __arch_swab32 __arch_swab32 -#include +#define __arch__swab32(x) ___arch__swab32(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __ARMEB__ +#include +#else +#include +#endif #endif + From 56c7426b3951e4f35a71d695f1c982989399d6fd Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 1 Sep 2008 16:44:23 +0200 Subject: [PATCH 509/638] sched_clock: fix NOHZ interaction If HLT stops the TSC, we'll fail to account idle time, thereby inflating the actual process times. Fix this by re-calibrating the clock against GTOD when leaving nohz mode. Signed-off-by: Peter Zijlstra Tested-by: Avi Kivity Signed-off-by: Ingo Molnar --- kernel/time/tick-sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 7a46bde78c6..a87b0468568 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -162,6 +162,8 @@ void tick_nohz_stop_idle(int cpu) ts->idle_lastupdate = now; ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta); ts->idle_active = 0; + + sched_clock_idle_wakeup_event(0); } } @@ -177,6 +179,7 @@ static ktime_t tick_nohz_start_idle(struct tick_sched *ts) } ts->idle_entrytime = now; ts->idle_active = 1; + sched_clock_idle_sleep_event(); return now; } From 49048622eae698e5c4ae61f7e71200f265ccc529 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Fri, 5 Sep 2008 18:12:23 +0200 Subject: [PATCH 510/638] sched: fix process time monotonicity Spencer reported a problem where utime and stime were going negative despite the fixes in commit b27f03d4bdc145a09fb7b0c0e004b29f1ee555fa. The suspected reason for the problem is that signal_struct maintains it's own utime and stime (of exited tasks), these are not updated using the new task_utime() routine, hence sig->utime can go backwards and cause the same problem to occur (sig->utime, adds tsk->utime and not task_utime()). This patch fixes the problem TODO: using max(task->prev_utime, derived utime) works for now, but a more generic solution is to implement cputime_max() and use the cputime_gt() function for comparison. Reported-by: spencer@bluehost.com Signed-off-by: Balbir Singh Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- fs/proc/array.c | 59 ------------------------------------------- include/linux/sched.h | 4 +++ kernel/exit.c | 6 ++--- kernel/sched.c | 59 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 62 deletions(-) diff --git a/fs/proc/array.c b/fs/proc/array.c index 0d6eb33597c..71c9be59c9c 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -337,65 +337,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns, return 0; } -/* - * Use precise platform statistics if available: - */ -#ifdef CONFIG_VIRT_CPU_ACCOUNTING -static cputime_t task_utime(struct task_struct *p) -{ - return p->utime; -} - -static cputime_t task_stime(struct task_struct *p) -{ - return p->stime; -} -#else -static cputime_t task_utime(struct task_struct *p) -{ - clock_t utime = cputime_to_clock_t(p->utime), - total = utime + cputime_to_clock_t(p->stime); - u64 temp; - - /* - * Use CFS's precise accounting: - */ - temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime); - - if (total) { - temp *= utime; - do_div(temp, total); - } - utime = (clock_t)temp; - - p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime)); - return p->prev_utime; -} - -static cputime_t task_stime(struct task_struct *p) -{ - clock_t stime; - - /* - * Use CFS's precise accounting. (we subtract utime from - * the total, to make sure the total observed by userspace - * grows monotonically - apps rely on that): - */ - stime = nsec_to_clock_t(p->se.sum_exec_runtime) - - cputime_to_clock_t(task_utime(p)); - - if (stime >= 0) - p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime)); - - return p->prev_stime; -} -#endif - -static cputime_t task_gtime(struct task_struct *p) -{ - return p->gtime; -} - static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, struct pid *pid, struct task_struct *task, int whole) { diff --git a/include/linux/sched.h b/include/linux/sched.h index cfb0d87b99f..3d9120c5ad1 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1475,6 +1475,10 @@ static inline void put_task_struct(struct task_struct *t) __put_task_struct(t); } +extern cputime_t task_utime(struct task_struct *p); +extern cputime_t task_stime(struct task_struct *p); +extern cputime_t task_gtime(struct task_struct *p); + /* * Per process flags */ diff --git a/kernel/exit.c b/kernel/exit.c index 25ed2ad986d..16395644a98 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -112,9 +112,9 @@ static void __exit_signal(struct task_struct *tsk) * We won't ever get here for the group leader, since it * will have been the last reference on the signal_struct. */ - sig->utime = cputime_add(sig->utime, tsk->utime); - sig->stime = cputime_add(sig->stime, tsk->stime); - sig->gtime = cputime_add(sig->gtime, tsk->gtime); + sig->utime = cputime_add(sig->utime, task_utime(tsk)); + sig->stime = cputime_add(sig->stime, task_stime(tsk)); + sig->gtime = cputime_add(sig->gtime, task_gtime(tsk)); sig->min_flt += tsk->min_flt; sig->maj_flt += tsk->maj_flt; sig->nvcsw += tsk->nvcsw; diff --git a/kernel/sched.c b/kernel/sched.c index 9a1ddb84e26..1a5f73c1fcd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4178,6 +4178,65 @@ void account_steal_time(struct task_struct *p, cputime_t steal) cpustat->steal = cputime64_add(cpustat->steal, tmp); } +/* + * Use precise platform statistics if available: + */ +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +cputime_t task_utime(struct task_struct *p) +{ + return p->utime; +} + +cputime_t task_stime(struct task_struct *p) +{ + return p->stime; +} +#else +cputime_t task_utime(struct task_struct *p) +{ + clock_t utime = cputime_to_clock_t(p->utime), + total = utime + cputime_to_clock_t(p->stime); + u64 temp; + + /* + * Use CFS's precise accounting: + */ + temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime); + + if (total) { + temp *= utime; + do_div(temp, total); + } + utime = (clock_t)temp; + + p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime)); + return p->prev_utime; +} + +cputime_t task_stime(struct task_struct *p) +{ + clock_t stime; + + /* + * Use CFS's precise accounting. (we subtract utime from + * the total, to make sure the total observed by userspace + * grows monotonically - apps rely on that): + */ + stime = nsec_to_clock_t(p->se.sum_exec_runtime) - + cputime_to_clock_t(task_utime(p)); + + if (stime >= 0) + p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime)); + + return p->prev_stime; +} +#endif + +inline cputime_t task_gtime(struct task_struct *p) +{ + return p->gtime; +} + /* * This function gets called by the timer code, with HZ frequency. * We call it with interrupts disabled. From f171d4d769c8ccac6675892960e37f6485837fae Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 3 Sep 2008 16:17:14 +0300 Subject: [PATCH 511/638] UBIFS: fix division by zero If fanout is 3, we have division by zero in 'ubifs_read_superblock()': divide error: 0000 [#1] PREEMPT SMP Pid: 28744, comm: mount Not tainted (2.6.27-rc4-ubifs-2.6 #23) EIP: 0060:[] EFLAGS: 00010202 CPU: 0 EIP is at ubifs_reported_space+0x2d/0x69 [ubifs] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: f0ae64b0 EBP: f1f9fcf4 ESP: f1f9fce0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Signed-off-by: Artem Bityutskiy --- fs/ubifs/budget.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index 101d278c591..73db464cd08 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -723,24 +723,25 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c, */ long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free) { - int divisor, factor; + int divisor, factor, f; /* * Reported space size is @free * X, where X is UBIFS block size * divided by UBIFS block size + all overhead one data block * introduces. The overhead is the node header + indexing overhead. * - * Indexing overhead is calculations are based on the following - * formula: I = N/(f - 1) + 1, where I - number of indexing nodes, N - - * number of data nodes, f - fanout. Because effective UBIFS fanout is - * twice as less than maximum fanout, we assume that each data node + * Indexing overhead calculations are based on the following formula: + * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number + * of data nodes, f - fanout. Because effective UBIFS fanout is twice + * as less than maximum fanout, we assume that each data node * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes. * Note, the multiplier 3 is because UBIFS reseves thrice as more space * for the index. */ + f = c->fanout > 3 ? c->fanout >> 1 : 2; factor = UBIFS_BLOCK_SIZE; divisor = UBIFS_MAX_DATA_NODE_SZ; - divisor += (c->max_idx_node_sz * 3) / ((c->fanout >> 1) - 1); + divisor += (c->max_idx_node_sz * 3) / (f - 1); free *= factor; do_div(free, divisor); return free; From a5cb562d6977d9d7989c346b7b153cef31ec0228 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 3 Sep 2008 18:26:47 +0300 Subject: [PATCH 512/638] UBIFS: make minimum fanout 3 UBIFS does not really work correctly when fanout is 2, because of the way we manage the indexing tree. It may just become a list and UBIFS screws up. Signed-off-by: Artem Bityutskiy --- fs/ubifs/ubifs-media.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h index bd2121f3426..a9ecbd9af20 100644 --- a/fs/ubifs/ubifs-media.h +++ b/fs/ubifs/ubifs-media.h @@ -87,7 +87,7 @@ #define UBIFS_SK_LEN 8 /* Minimum index tree fanout */ -#define UBIFS_MIN_FANOUT 2 +#define UBIFS_MIN_FANOUT 3 /* Maximum number of levels in UBIFS indexing B-tree */ #define UBIFS_MAX_LEVELS 512 From bf7394ccc13fe291d9258f01113b4c61214ddeae Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Sep 2008 12:38:09 -0700 Subject: [PATCH 513/638] Revert "mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM" This reverts commit 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c, which was reported to break wireless at least in some combinations with 32bit user space and a 64bit kernel. Alex Williamnson bisected it to this commit. Reported-and-bisected-by: Alex Williamson Acked-by: John W. Linville Cc: David Miller Cc: Jouni Malinen Signed-off-by: Linus Torvalds --- net/mac80211/mlme.c | 50 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 10 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9bb68c6a8f4..902cac1bd24 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -478,21 +478,51 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_info( static void ieee80211_sta_send_associnfo(struct net_device *dev, struct ieee80211_if_sta *ifsta) { + char *buf; + size_t len; + int i; union iwreq_data wrqu; + if (!ifsta->assocreq_ies && !ifsta->assocresp_ies) + return; + + buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len + + ifsta->assocresp_ies_len), GFP_KERNEL); + if (!buf) + return; + + len = sprintf(buf, "ASSOCINFO("); if (ifsta->assocreq_ies) { - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = ifsta->assocreq_ies_len; - wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, - ifsta->assocreq_ies); + len += sprintf(buf + len, "ReqIEs="); + for (i = 0; i < ifsta->assocreq_ies_len; i++) { + len += sprintf(buf + len, "%02x", + ifsta->assocreq_ies[i]); + } + } + if (ifsta->assocresp_ies) { + if (ifsta->assocreq_ies) + len += sprintf(buf + len, " "); + len += sprintf(buf + len, "RespIEs="); + for (i = 0; i < ifsta->assocresp_ies_len; i++) { + len += sprintf(buf + len, "%02x", + ifsta->assocresp_ies[i]); + } + } + len += sprintf(buf + len, ")"); + + if (len > IW_CUSTOM_MAX) { + len = sprintf(buf, "ASSOCRESPIE="); + for (i = 0; i < ifsta->assocresp_ies_len; i++) { + len += sprintf(buf + len, "%02x", + ifsta->assocresp_ies[i]); + } } - if (ifsta->assocresp_ies) { - memset(&wrqu, 0, sizeof(wrqu)); - wrqu.data.length = ifsta->assocresp_ies_len; - wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, - ifsta->assocresp_ies); - } + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = len; + wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf); + + kfree(buf); } From 0510617b85758b6e66f3c602ceccea1826440470 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 4 Aug 2008 19:44:34 +0200 Subject: [PATCH 514/638] [MIPS] Fix data bus error recovery With -ffunction-section the entries in __dbe_table aren't no longer sorted, so the lookup of exception addresses in do_be() failed for some addresses. To avoid this we now sort __dbe_table. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 426cced1e9d..1f579a8ea25 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -373,8 +373,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs) do_exit(SIGSEGV); } -extern const struct exception_table_entry __start___dbe_table[]; -extern const struct exception_table_entry __stop___dbe_table[]; +extern struct exception_table_entry __start___dbe_table[]; +extern struct exception_table_entry __stop___dbe_table[]; __asm__( " .section __dbe_table, \"a\"\n" @@ -1682,4 +1682,6 @@ void __init trap_init(void) flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); + + sort_extable(__start___dbe_table, __stop___dbe_table); } From e0cee3eea7875800451739ae38f99edcf11c133d Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 4 Aug 2008 20:53:57 +0200 Subject: [PATCH 515/638] [MIPS] Fix WARNING: at kernel/smp.c:290 trap_init issues flush_icache_range(), which uses ipi functions to get icache flushing done on all cpus. But this is done before interrupts are enabled and caused WARN_ON messages. This changeset introduces a new local_flush_icache_range() and uses it before interrupts (and additional CPUs) are enabled to avoid this problem. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 12 +++++++----- arch/mips/mm/c-r3k.c | 1 + arch/mips/mm/c-r4k.c | 18 ++++++++++++------ arch/mips/mm/c-tx39.c | 1 + arch/mips/mm/cache.c | 1 + arch/mips/mm/tlbex.c | 6 +++--- include/asm-mips/cacheflush.h | 1 + 7 files changed, 26 insertions(+), 14 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1f579a8ea25..6bee29097a5 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1200,7 +1200,7 @@ void *set_except_vector(int n, void *addr) if (n == 0 && cpu_has_divec) { *(u32 *)(ebase + 0x200) = 0x08000000 | (0x03ffffff & (handler >> 2)); - flush_icache_range(ebase + 0x200, ebase + 0x204); + local_flush_icache_range(ebase + 0x200, ebase + 0x204); } return (void *)old_handler; } @@ -1283,7 +1283,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff); w = (u32 *)(b + ori_offset); *w = (*w & 0xffff0000) | ((u32)handler & 0xffff); - flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len)); + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+handler_len)); } else { /* @@ -1295,7 +1296,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) w = (u32 *)b; *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */ *w = 0; - flush_icache_range((unsigned long)b, (unsigned long)(b+8)); + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+8)); } return (void *)old_handler; @@ -1515,7 +1517,7 @@ void __cpuinit per_cpu_trap_init(void) void __init set_handler(unsigned long offset, void *addr, unsigned long size) { memcpy((void *)(ebase + offset), addr, size); - flush_icache_range(ebase + offset, ebase + offset + size); + local_flush_icache_range(ebase + offset, ebase + offset + size); } static char panic_null_cerr[] __cpuinitdata = @@ -1680,7 +1682,7 @@ void __init trap_init(void) signal32_init(); #endif - flush_icache_range(ebase, ebase + 0x400); + local_flush_icache_range(ebase, ebase + 0x400); flush_tlb_handlers(); sort_extable(__start___dbe_table, __stop___dbe_table); diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 27a5b466c85..5500c20c79a 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void) flush_cache_range = r3k_flush_cache_range; flush_cache_page = r3k_flush_cache_page; flush_icache_range = r3k_flush_icache_range; + local_flush_icache_range = r3k_flush_icache_range; flush_cache_sigtramp = r3k_flush_cache_sigtramp; local_flush_data_cache_page = local_r3k_flush_data_cache_page; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 71df3390c07..6e99665ae86 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -543,12 +543,8 @@ struct flush_icache_range_args { unsigned long end; }; -static inline void local_r4k_flush_icache_range(void *args) +static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end) { - struct flush_icache_range_args *fir_args = args; - unsigned long start = fir_args->start; - unsigned long end = fir_args->end; - if (!cpu_has_ic_fills_f_dc) { if (end - start >= dcache_size) { r4k_blast_dcache(); @@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args) protected_blast_icache_range(start, end); } +static inline void local_r4k_flush_icache_range_ipi(void *args) +{ + struct flush_icache_range_args *fir_args = args; + unsigned long start = fir_args->start; + unsigned long end = fir_args->end; + + local_r4k_flush_icache_range(start, end); +} + static void r4k_flush_icache_range(unsigned long start, unsigned long end) { struct flush_icache_range_args args; @@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1); + r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1); instruction_hazard(); } @@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void) local_flush_data_cache_page = local_r4k_flush_data_cache_page; flush_data_cache_page = r4k_flush_data_cache_page; flush_icache_range = r4k_flush_icache_range; + local_flush_icache_range = local_r4k_flush_icache_range; #if defined(CONFIG_DMA_NONCOHERENT) if (coherentio) { diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index a9f7f1f5e9b..39c81820ce8 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void) flush_cache_range = (void *) tx39h_flush_icache_all; flush_cache_page = (void *) tx39h_flush_icache_all; flush_icache_range = (void *) tx39h_flush_icache_all; + local_flush_icache_range = (void *) tx39h_flush_icache_all; flush_cache_sigtramp = (void *) tx39h_flush_icache_all; local_flush_data_cache_page = (void *) tx39h_flush_icache_all; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 034e8506f6e..1eb7c71e3d6 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start, void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); void (*flush_icache_range)(unsigned long start, unsigned long end); +void (*local_flush_icache_range)(unsigned long start, unsigned long end); void (*__flush_cache_vmap)(void); void (*__flush_cache_vunmap)(void); diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 76da73a5ab3..979cf919728 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void) void __cpuinit flush_tlb_handlers(void) { - flush_icache_range((unsigned long)handle_tlbl, + local_flush_icache_range((unsigned long)handle_tlbl, (unsigned long)handle_tlbl + sizeof(handle_tlbl)); - flush_icache_range((unsigned long)handle_tlbs, + local_flush_icache_range((unsigned long)handle_tlbs, (unsigned long)handle_tlbs + sizeof(handle_tlbs)); - flush_icache_range((unsigned long)handle_tlbm, + local_flush_icache_range((unsigned long)handle_tlbm, (unsigned long)handle_tlbm + sizeof(handle_tlbm)); } diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index d5c0f2fda51..03b1d69b142 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -63,6 +63,7 @@ static inline void flush_icache_page(struct vm_area_struct *vma, } extern void (*flush_icache_range)(unsigned long start, unsigned long end); +extern void (*local_flush_icache_range)(unsigned long start, unsigned long end); extern void (*__flush_cache_vmap)(void); From 073828d078d3e55b23b2b5937a49dc1019c5907d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 26 Aug 2008 21:29:58 +0900 Subject: [PATCH 516/638] [MIPS] TXx9: Fix txx9_pcode initialization The txx9_pcode variable was introduced in commit fe1c2bc64f65003b39f331a8e4b0d15b235a4afd ("TXx9: Add 64-bit support") but was not initialized properly. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 0afe94c48fb..fe6bee09cec 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -53,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) txx9_ce_res[i].name = txx9_ce_res_name[i]; } + txx9_pcode = pcode; sprintf(txx9_pcode_str, "TX%x", pcode); if (base) { txx9_reg_res.start = base & 0xfffffffffULL; From 3885ec8ca29e5e33e9a5f0ae9dc849d798634ec9 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 26 Aug 2008 22:30:41 +0900 Subject: [PATCH 517/638] [MIPS] TX39xx: Add missing local_flush_icache_range initialization Commmit 59e39ecd933ba49eb6efe84cbfa5597a6c9ef18a ("Fix WARNING: at kernel/smp.c:290") introduced local_flush_icache_range but lacks initialization for some TX39 case. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/mm/c-tx39.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 39c81820ce8..f7c8f9ce39c 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -391,6 +391,7 @@ void __cpuinit tx39_cache_init(void) flush_cache_range = tx39_flush_cache_range; flush_cache_page = tx39_flush_cache_page; flush_icache_range = tx39_flush_icache_range; + local_flush_icache_range = tx39_flush_icache_range; flush_cache_sigtramp = tx39_flush_cache_sigtramp; local_flush_data_cache_page = local_tx39_flush_data_cache_page; From 0011036beeffeada15acd1936d67988de21ca65e Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 26 Aug 2008 22:34:57 +0900 Subject: [PATCH 518/638] [MIPS] Probe initrd header only if explicitly specified Currently init_initrd() probes initrd header at the last page of kernel image, but it is valid only if addinitrd was used. If addinitrd was not used, the area contains garbage so probing there might misdetect initrd header (magic number is not strictly robust). This patch introduces CONFIG_PROBE_INITRD_HEADER to explicitly enable this probing. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 9 +++++++++ arch/mips/kernel/setup.c | 33 ++++++++++++++++++--------------- 2 files changed, 27 insertions(+), 15 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 4da736e2533..49896a2a1d7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1886,6 +1886,15 @@ config STACKTRACE_SUPPORT source "init/Kconfig" +config PROBE_INITRD_HEADER + bool "Probe initrd header created by addinitrd" + depends on BLK_DEV_INITRD + help + Probe initrd header at the last page of kernel image. + Say Y here if you are using arch/mips/boot/addinitrd.c to + add initrd or initramfs image to the kernel image. + Otherwise, say N. + menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 2aae76bce29..16f8edfe5cd 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early); static unsigned long __init init_initrd(void) { unsigned long end; - u32 *initrd_header; /* * Board specific code or command line parser should have * already set up initrd_start and initrd_end. In these cases * perfom sanity checks and use them if all looks good. */ - if (initrd_start && initrd_end > initrd_start) - goto sanitize; + if (!initrd_start || initrd_end <= initrd_start) { +#ifdef CONFIG_PROBE_INITRD_HEADER + u32 *initrd_header; - /* - * See if initrd has been added to the kernel image by - * arch/mips/boot/addinitrd.c. In that case a header is - * prepended to initrd and is made up by 8 bytes. The fisrt - * word is a magic number and the second one is the size of - * initrd. Initrd start must be page aligned in any cases. - */ - initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; - if (initrd_header[0] != 0x494E5244) + /* + * See if initrd has been added to the kernel image by + * arch/mips/boot/addinitrd.c. In that case a header is + * prepended to initrd and is made up by 8 bytes. The first + * word is a magic number and the second one is the size of + * initrd. Initrd start must be page aligned in any cases. + */ + initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8; + if (initrd_header[0] != 0x494E5244) + goto disable; + initrd_start = (unsigned long)(initrd_header + 2); + initrd_end = initrd_start + initrd_header[1]; +#else goto disable; - initrd_start = (unsigned long)(initrd_header + 2); - initrd_end = initrd_start + initrd_header[1]; +#endif + } -sanitize: if (initrd_start & ~PAGE_MASK) { pr_err("initrd start must be page aligned\n"); goto disable; From 11d55d2cba6e867be8955e5ae011c54c556b849f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 5 Sep 2008 14:00:18 -0700 Subject: [PATCH 519/638] res_counter: fix off-by-one bug in setting limit I found we can no longer set limit to 0 with 2.6.27-rcX: # mount -t cgroup -omemory xxx /mnt # mkdir /mnt/0 # echo 0 > /mnt/0/memory.limit_in_bytes bash: echo: write error: Device or resource busy It turned out 'limit' can't be set to 'usage', which is wrong IMO. Signed-off-by: Li Zefan Acked-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Acked-by: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/res_counter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index fdeadd9740d..271c1c2c9f6 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -166,7 +166,7 @@ static inline int res_counter_set_limit(struct res_counter *cnt, int ret = -EBUSY; spin_lock_irqsave(&cnt->lock, flags); - if (cnt->usage < limit) { + if (cnt->usage <= limit) { cnt->limit = limit; ret = 0; } From 3cb5599a84c557c0dd9a19feb63a3788268cf249 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 5 Sep 2008 14:00:19 -0700 Subject: [PATCH 520/638] forcedeth: fix kexec regression Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361 and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr] forcedeth: setup wake-on-lan before shutting down") that makes network adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced kernels. The problem appears to be that if the adapter is put into D3_hot during ->shutdown(), it cannot be brought back into D0 after kexec (ref. http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only put forcedeth into D3 during ->shutdown() if the system is to be powered off. Signed-off-by: Rafael J. Wysocki Tested-by: Yinghai Lu Cc: Ayaz Abdulla Acked-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/net/forcedeth.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 331b86b01fa..0b6ecef9a84 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5975,10 +5975,12 @@ static void nv_shutdown(struct pci_dev *pdev) if (netif_running(dev)) nv_close(dev); - pci_enable_wake(pdev, PCI_D3hot, np->wolenabled); - pci_enable_wake(pdev, PCI_D3cold, np->wolenabled); pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); + if (system_state == SYSTEM_POWER_OFF) { + if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled)) + pci_enable_wake(pdev, PCI_D3hot, np->wolenabled); + pci_set_power_state(pdev, PCI_D3hot); + } } #else #define nv_suspend NULL From 34a35bddb9382fc2663e3137875ee58928f7d704 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 5 Sep 2008 14:00:22 -0700 Subject: [PATCH 521/638] atmel_lcdfb: fix oops in rmmod when framebuffer fails to register If framebuffer registration failed in platform driver ->probe() callback, dev_get_drvdata() points to freed memory region, but ->remove() function try to use it and the following oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000228 pgd = c3a20000 [00000228] *pgd=23a2b031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] Modules linked in: atmel_lcdfb(-) cfbcopyarea cfbimgblt cfbfillrect [last unloaded: atmel_lcdfb] CPU: 0 Not tainted (2.6.27-rc2 #116) PC is at atmel_lcdfb_remove+0x14/0xf8 [atmel_lcdfb] LR is at platform_drv_remove+0x20/0x24 pc : [] lr : [] psr: a0000013 sp : c3a45e84 ip : c3a45ea0 fp : c3a45e9c r10: 00000002 r9 : c3a44000 r8 : c0026c04 r7 : 00000880 r6 : c02bb228 r5 : 00000000 r4 : c02bb230 r3 : bf007e3c r2 : c02bb230 r1 : 00000004 r0 : c02bb228 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 23a20000 DAC: 00000015 Process rmmod (pid: 6799, stack limit = 0xc3a44260) Stack: (0xc3a45e84 to 0xc3a46000) 5e80: c02bb230 bf007e3c bf007e3c c3a45eac c3a45ea0 c0157d28 bf006bc0 5ea0: c3a45ec4 c3a45eb0 c0156d20 c0157d18 c02bb230 c02bb2d8 c3a45ee0 c3a45ec8 5ec0: c0156da8 c0156cb8 bf007e3c bf007ee0 c02c8e14 c3a45efc c3a45ee4 c0156018 5ee0: c0156d50 bf007e3c bf007ee0 00000000 c3a45f18 c3a45f00 c0157220 c0155f9c 5f00: 00000000 bf007ee0 bf008000 c3a45f28 c3a45f1c c0157e34 c01571ec c3a45f38 5f20: c3a45f2c bf006ba8 c0157e30 c3a45fa4 c3a45f3c c005772c bf006ba4 656d7461 5f40: 636c5f6c 00626664 c004c988 c3a45f80 c3a45f5c 00000000 c3a45fb0 00000000 5f60: ffffffff becaccd8 00000880 00000000 000a5e80 00000001 bf007ee0 00000880 5f80: c3a45f84 00000000 becaccd4 00000002 000003df 00000081 00000000 c3a45fa8 5fa0: c0026a60 c0057584 00000002 000003df 00900081 000a5e80 00000880 00000000 5fc0: becaccd4 00000002 000003df 00000000 000a5e80 00000001 00000002 0000005f 5fe0: 4004f5ec becacbe8 0001a158 4004f5fc 20000010 00900081 f9ffbadf 7bbfb2bb Backtrace: [] (atmel_lcdfb_remove+0x0/0xf8 [atmel_lcdfb]) from [] (platform_drv_remove+0x20/0x24) r6:bf007e3c r5:bf007e3c r4:c02bb230 [] (platform_drv_remove+0x0/0x24) from [] (__device_release_driver+0x78/0x98) [] (__device_release_driver+0x0/0x98) from [] (driver_detach+0x68/0x90) r5:c02bb2d8 r4:c02bb230 [] (driver_detach+0x0/0x90) from [] (bus_remove_driver+0x8c/0xb4) r6:c02c8e14 r5:bf007ee0 r4:bf007e3c [] (bus_remove_driver+0x0/0xb4) from [] (driver_unregister+0x44/0x48) r6:00000000 r5:bf007ee0 r4:bf007e3c [] (driver_unregister+0x0/0x48) from [] (platform_driver_unregister+0x14/0x18) r6:bf008000 r5:bf007ee0 r4:00000000 [] (platform_driver_unregister+0x0/0x18) from [] (atmel_lcdfb_exit+0x14/0x1c [atmel_lcdfb]) [] (atmel_lcdfb_exit+0x0/0x1c [atmel_lcdfb]) from [] (sys_delete_module+0x1b8/0x22c) [] (sys_delete_module+0x0/0x22c) from [] (ret_fast_syscall+0x0/0x2c) r7:00000081 r6:000003df r5:00000002 r4:becaccd4 Code: e92dd870 e24cb004 e59050c4 e1a06000 (e5954228) ---[ end trace 85476b184d9e68d8 ]--- This patch fixes the oops. Signed-off-by: Stanislaw Gruszka Acked-by: Nicolas Ferre Acked-by: Krzysztof Helt Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 9c5925927ec..5a24c6411d3 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -939,7 +939,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) ret = register_framebuffer(info); if (ret < 0) { dev_err(dev, "failed to register framebuffer device: %d\n", ret); - goto free_cmap; + goto reset_drvdata; } /* add selected videomode to modelist */ @@ -955,7 +955,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) return 0; - +reset_drvdata: + dev_set_drvdata(dev, NULL); free_cmap: fb_dealloc_cmap(&info->cmap); unregister_irqs: @@ -992,10 +993,11 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct fb_info *info = dev_get_drvdata(dev); - struct atmel_lcdfb_info *sinfo = info->par; + struct atmel_lcdfb_info *sinfo; - if (!sinfo) + if (!info || !info->par) return 0; + sinfo = info->par; cancel_work_sync(&sinfo->task); exit_backlight(sinfo); From 22f30168d296dbb54a21ebad44c9d735bca6f67b Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Fri, 5 Sep 2008 14:00:23 -0700 Subject: [PATCH 522/638] tracehook: comment pasto fixes Fix some pasto's in comments in the new linux/tracehook.h and asm-generic/syscall.h files. Reported-by: Wenji Huang Signed-off-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/syscall.h | 2 +- include/linux/tracehook.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h index abcf34c2fdc..ea8087b55ff 100644 --- a/include/asm-generic/syscall.h +++ b/include/asm-generic/syscall.h @@ -126,7 +126,7 @@ void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, * @args: array of argument values to store * * Changes @n arguments to the system call starting with the @i'th argument. - * @n'th argument to @val. Argument @i gets value @args[0], and so on. + * Argument @i gets value @args[0], and so on. * An arch inline version is probably optimal when @i and @n are constants. * * It's only valid to call this when @task is stopped for tracing on diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index b48d8196957..6186a789d6c 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -272,7 +272,7 @@ static inline void tracehook_finish_clone(struct task_struct *child, * tracehook_report_clone_complete(). This must prevent the child from * self-reaping if tracehook_report_clone_complete() uses the @child * pointer; otherwise it might have died and been released by the time - * tracehook_report_report_clone_complete() is called. + * tracehook_report_clone_complete() is called. * * Called with no locks held, but the child cannot run until this returns. */ From 70bb08962ea9bd50797ae9f16b2493f5f7c65053 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 5 Sep 2008 14:00:24 -0700 Subject: [PATCH 523/638] drivers/mmc/card/block.c: fix refcount leak in mmc_block_open() mmc_block_open() increments md->usage although it returns with -EROFS when default mounting a MMC/SD card with write protect switch on. This reference counting bug prevents /dev/mmcblkX from being released on card removal, and situation worsen with reinsertion until the minor number range runs out. Reported-by: Acked-by: Pierre Ossman Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/card/block.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 86dbb366415..6986f392624 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -103,8 +103,10 @@ static int mmc_blk_open(struct inode *inode, struct file *filp) check_disk_change(inode->i_bdev); ret = 0; - if ((filp->f_mode & FMODE_WRITE) && md->read_only) + if ((filp->f_mode & FMODE_WRITE) && md->read_only) { + mmc_blk_put(md); ret = -EROFS; + } } return ret; From b74b06c5f6612a72298f37baa65460a59c26ca67 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 15 Aug 2008 15:36:31 -0700 Subject: [PATCH 524/638] x86: boot: stub out unimplemented CPU feature words The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: H. Peter Anvin --- arch/x86/boot/cpucheck.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c index 4b9ae7c5674..4d3ff037201 100644 --- a/arch/x86/boot/cpucheck.c +++ b/arch/x86/boot/cpucheck.c @@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] = { REQUIRED_MASK0, REQUIRED_MASK1, - REQUIRED_MASK2, - REQUIRED_MASK3, + 0, /* REQUIRED_MASK2 not implemented in this file */ + 0, /* REQUIRED_MASK3 not implemented in this file */ REQUIRED_MASK4, - REQUIRED_MASK5, + 0, /* REQUIRED_MASK5 not implemented in this file */ REQUIRED_MASK6, - REQUIRED_MASK7, + 0, /* REQUIRED_MASK7 not implemented in this file */ }; #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a)) From b6734c35af028f06772c0b2c836c7d579e6d4dad Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 18 Aug 2008 17:39:32 -0700 Subject: [PATCH 525/638] x86: add NOPL as a synthetic CPU feature bit The long noops ("NOPL") are supposed to be detected by family >= 6. Unfortunately, several non-Intel x86 implementations, both hardware and software, don't obey this dictum. Instead, probe for NOPL directly by executing a NOPL instruction and see if we get #UD. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/common.c | 32 ++++++++++++++++++++++++- arch/x86/kernel/cpu/common_64.c | 36 +++++++++++++++++++++++++++++ arch/x86/kernel/cpu/feature_names.c | 3 ++- include/asm-x86/cpufeature.h | 11 +++++---- include/asm-x86/required-features.h | 8 ++++++- 5 files changed, 82 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 80ab20d4fa3..0785b3c8d04 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -13,6 +13,7 @@ #include #include #include +#include #ifdef CONFIG_X86_LOCAL_APIC #include #include @@ -341,6 +342,35 @@ static void __init early_cpu_detect(void) early_get_cap(c); } +/* + * The NOPL instruction is supposed to exist on all CPUs with + * family >= 6, unfortunately, that's not true in practice because + * of early VIA chips and (more importantly) broken virtualizers that + * are not easy to detect. Hence, probe for it based on first + * principles. + */ +static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) +{ + const u32 nopl_signature = 0x888c53b1; /* Random number */ + u32 has_nopl = nopl_signature; + + clear_cpu_cap(c, X86_FEATURE_NOPL); + if (c->x86 >= 6) { + asm volatile("\n" + "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ + "2:\n" + " .section .fixup,\"ax\"\n" + "3: xor %0,%0\n" + " jmp 2b\n" + " .previous\n" + _ASM_EXTABLE(1b,3b) + : "+a" (has_nopl)); + + if (has_nopl == nopl_signature) + set_cpu_cap(c, X86_FEATURE_NOPL); + } +} + static void __cpuinit generic_identify(struct cpuinfo_x86 *c) { u32 tfms, xlvl; @@ -395,8 +425,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c) } init_scattered_cpuid_features(c); + detect_nopl(c); } - } static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index dd6e3f15017..c3afba5a81a 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #ifdef CONFIG_X86_LOCAL_APIC #include @@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void) } } +/* + * The NOPL instruction is supposed to exist on all CPUs with + * family >= 6, unfortunately, that's not true in practice because + * of early VIA chips and (more importantly) broken virtualizers that + * are not easy to detect. Hence, probe for it based on first + * principles. + * + * Note: no 64-bit chip is known to lack these, but put the code here + * for consistency with 32 bits, and to make it utterly trivial to + * diagnose the problem should it ever surface. + */ +static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) +{ + const u32 nopl_signature = 0x888c53b1; /* Random number */ + u32 has_nopl = nopl_signature; + + clear_cpu_cap(c, X86_FEATURE_NOPL); + if (c->x86 >= 6) { + asm volatile("\n" + "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ + "2:\n" + " .section .fixup,\"ax\"\n" + "3: xor %0,%0\n" + " jmp 2b\n" + " .previous\n" + _ASM_EXTABLE(1b,3b) + : "+a" (has_nopl)); + + if (has_nopl == nopl_signature) + set_cpu_cap(c, X86_FEATURE_NOPL); + } +} + static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); void __init early_cpu_init(void) @@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) c->x86_phys_bits = eax & 0xff; } + detect_nopl(c); + if (c->x86_vendor != X86_VENDOR_UNKNOWN && cpu_devs[c->x86_vendor]->c_early_init) cpu_devs[c->x86_vendor]->c_early_init(c); diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c index e43ad4ad4cb..c9017799497 100644 --- a/arch/x86/kernel/cpu/feature_names.c +++ b/arch/x86/kernel/cpu/feature_names.c @@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = { NULL, NULL, NULL, NULL, "constant_tsc", "up", NULL, "arch_perfmon", "pebs", "bts", NULL, NULL, - "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL, + "rep_good", NULL, NULL, NULL, + "nopl", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* Intel-defined (#2) */ diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 762f6a6bc70..9489283a4bc 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -72,14 +72,15 @@ #define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */ #define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */ #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */ -#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ -#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ -#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */ -#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */ +#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */ +#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */ +#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */ +#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ -#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ +#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */ +#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h index adec887dd7c..5c2ff4bc298 100644 --- a/include/asm-x86/required-features.h +++ b/include/asm-x86/required-features.h @@ -41,6 +41,12 @@ # define NEED_3DNOW 0 #endif +#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64) +# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31)) +#else +# define NEED_NOPL 0 +#endif + #ifdef CONFIG_X86_64 #define NEED_PSE 0 #define NEED_MSR (1<<(X86_FEATURE_MSR & 31)) @@ -67,7 +73,7 @@ #define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW) #define REQUIRED_MASK2 0 -#define REQUIRED_MASK3 0 +#define REQUIRED_MASK3 (NEED_NOPL) #define REQUIRED_MASK4 0 #define REQUIRED_MASK5 0 #define REQUIRED_MASK6 0 From f31d731e4467e61de51d7f6d7115f3b712d9354c Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 18 Aug 2008 17:50:33 -0700 Subject: [PATCH 526/638] x86: use X86_FEATURE_NOPL in alternatives Use X86_FEATURE_NOPL to determine if it is safe to use P6 NOPs in alternatives. Also, replace table and loop with simple if statement. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/alternative.c | 36 +++++++++++++---------------------- 1 file changed, 13 insertions(+), 23 deletions(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 2763cb37b55..65a0c1b4869 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { extern char __vsyscall_0; const unsigned char *const *find_nop_table(void) { - return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL || - boot_cpu_data.x86 < 6 ? k8_nops : p6_nops; + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return k8_nops; } #else /* CONFIG_X86_64 */ -static const struct nop { - int cpuid; - const unsigned char *const *noptable; -} noptypes[] = { - { X86_FEATURE_K8, k8_nops }, - { X86_FEATURE_K7, k7_nops }, - { X86_FEATURE_P4, p6_nops }, - { X86_FEATURE_P3, p6_nops }, - { -1, NULL } -}; - const unsigned char *const *find_nop_table(void) { - const unsigned char *const *noptable = intel_nops; - int i; - - for (i = 0; noptypes[i].cpuid >= 0; i++) { - if (boot_cpu_has(noptypes[i].cpuid)) { - noptable = noptypes[i].noptable; - break; - } - } - return noptable; + if (boot_cpu_has(X86_FEATURE_K8)) + return k8_nops; + else if (boot_cpu_has(X86_FEATURE_K7)) + return k7_nops; + else if (boot_cpu_has(X86_FEATURE_NOPL)) + return p6_nops; + else + return intel_nops; } #endif /* CONFIG_X86_64 */ From 7300711e8c6824fcfbd42a126980ff50439d8dd0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 6 Sep 2008 03:01:45 +0200 Subject: [PATCH 527/638] clockevents: broadcast fixup possible waiters Until the C1E patches arrived there where no users of periodic broadcast before switching to oneshot mode. Now we need to trigger a possible waiter for a periodic broadcast when switching to oneshot mode. Otherwise we can starve them for ever. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 37 +++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 2bc1f046151..2f5a38294bf 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -491,6 +491,18 @@ static void tick_broadcast_clear_oneshot(int cpu) cpu_clear(cpu, tick_broadcast_oneshot_mask); } +static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires) +{ + struct tick_device *td; + int cpu; + + for_each_cpu_mask_nr(cpu, *mask) { + td = &per_cpu(tick_cpu_device, cpu); + if (td->evtdev) + td->evtdev->next_event = expires; + } +} + /** * tick_broadcast_setup_oneshot - setup the broadcast device */ @@ -498,9 +510,32 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) { /* Set it up only once ! */ if (bc->event_handler != tick_handle_oneshot_broadcast) { + int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC; + int cpu = smp_processor_id(); + cpumask_t mask; + bc->event_handler = tick_handle_oneshot_broadcast; clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - bc->next_event.tv64 = KTIME_MAX; + + /* Take the do_timer update */ + tick_do_timer_cpu = cpu; + + /* + * We must be careful here. There might be other CPUs + * waiting for periodic broadcast. We need to set the + * oneshot_mask bits for those and program the + * broadcast device to fire. + */ + mask = tick_broadcast_mask; + cpu_clear(cpu, mask); + cpus_or(tick_broadcast_oneshot_mask, + tick_broadcast_oneshot_mask, mask); + + if (was_periodic && !cpus_empty(mask)) { + tick_broadcast_init_next_event(&mask, tick_next_period); + tick_broadcast_set_event(tick_next_period, 1); + } else + bc->next_event.tv64 = KTIME_MAX; } } From f7676254f179eac6b5244a80195ec8ae0e9d4606 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 6 Sep 2008 03:03:32 +0200 Subject: [PATCH 528/638] x86: HPET fix moronic 32/64bit thinko We use the HPET only in 32bit mode because: 1) some HPETs are 32bit only 2) on i386 there is no way to read/write the HPET atomic 64bit wide The HPET code unification done by the "moron of the year" did not take into account that unsigned long is different on 32 and 64 bit. This thinko results in a possible endless loop in the clockevents code, when the return comparison fails due to the 64bit/332bit unawareness. unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit. but the final compare will fail and return -ETIME causing endless loops. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 2256315416d..801497a16e0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -270,15 +270,15 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode, } static int hpet_legacy_next_event(unsigned long delta, - struct clock_event_device *evt) + struct clock_event_device *evt) { - unsigned long cnt; + u32 cnt; cnt = hpet_readl(HPET_COUNTER); - cnt += delta; + cnt += (u32) delta; hpet_writel(cnt, HPET_T0_CMP); - return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0; + return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } /* From 72d43d9bc9210d24d09202eaf219eac09e17b339 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 6 Sep 2008 03:06:08 +0200 Subject: [PATCH 529/638] x86: HPET: read back compare register before reading counter After fixing the u32 thinko I sill had occasional hickups on ATI chipsets with small deltas. There seems to be a delay between writing the compare register and the transffer to the internal register which triggers the interrupt. Reading back the value makes sure, that it hit the internal match register befor we compare against the counter value. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 801497a16e0..73deaffadd0 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -278,6 +278,13 @@ static int hpet_legacy_next_event(unsigned long delta, cnt += (u32) delta; hpet_writel(cnt, HPET_T0_CMP); + /* + * We need to read back the CMP register to make sure that + * what we wrote hit the chip before we compare it to the + * counter. + */ + WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } From 8a656496b21efd95fd55b66e0601c5ad41f9b156 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 6 Sep 2008 11:43:41 +0200 Subject: [PATCH 530/638] Fix CONFIG_AC97_BUS dependency CONFIG_AC97_BUS is used from both sound and ucb1400 drivers. The recent change in Kconfig introduced the exclusive dependency on CONFIG_SOUND, and disabled the ucb1400 build without sound. This patch makes CONFIG_AC97_BUS independent. Signed-off-by: Takashi Iwai Tested-by: Randy Dunlap --- sound/Kconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/Kconfig b/sound/Kconfig index a37bee094eb..8ebf512ced6 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -91,6 +91,9 @@ endif # SOUND_PRIME endif # !M68K +endif # SOUND + +# AC97_BUS is used from both sound and ucb1400 config AC97_BUS tristate help @@ -99,4 +102,3 @@ config AC97_BUS sound although they're sharing the AC97 bus. Concerned drivers should "select" this. -endif # SOUND From 1ad77a876da48331451698cc4172c90ab9b6372f Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 5 Sep 2008 13:17:11 +0100 Subject: [PATCH 531/638] [ARM] 5241/1: provide ioremap_wc() This patch provides an ARM implementation of ioremap_wc(). We use different page table attributes depending on which CPU we are running on: - Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four possible mapping types (CB=00/01/10/11). We can't use any of the cached memory types (CB=10/11), since that breaks coherency with peripheral devices. Both CB=00 and CB=01 are suitable for _wc, and CB=01 (Uncached/Buffered) allows the hardware more freedom than CB=00, so we'll use that. (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores but isn't allowed to merge them, but there is no other mapping type we can use that allows the hardware to delay and merge stores, so we'll go with CB=01.) - XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight difference that on these platforms, CB=01 actually _does_ allow merging stores. (If you want noncoalescing bufferable behavior on Xscale v1/v2, you need to use XCB=101.) - Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100 mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal in ARMv6 parlance). The ARMv6 ARM explicitly says that any accesses to Normal memory can be merged, which makes Normal memory more suitable for _wc mappings than Device or Strongly Ordered memory, as the latter two mapping types are guaranteed to maintain transaction number, size and order. We use the Uncached variety of Normal mappings for the same reason that we can't use C=1 mappings on ARMv5. The xsc3 Architecture Specification documents TEXCB=00100 as being Uncacheable and allowing coalescing of writes, which is also just what we need. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/include/asm/io.h | 5 ++++- arch/arm/include/asm/mach/map.h | 14 +++++++------- arch/arm/mm/mmu.c | 20 ++++++++++++++++++++ 3 files changed, 31 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 94a95d7fafd..71934856fc2 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -61,8 +61,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); #define MT_DEVICE_NONSHARED 1 #define MT_DEVICE_CACHED 2 #define MT_DEVICE_IXP2000 3 +#define MT_DEVICE_WC 4 /* - * types 4 onwards can be found in asm/mach/map.h and are undefined + * types 5 onwards can be found in asm/mach/map.h and are undefined * for ioremap */ @@ -215,11 +216,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) #define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE) #define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED) +#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC) #define iounmap(cookie) __iounmap(cookie) #else #define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE) #define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED) +#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC) #define iounmap(cookie) __arch_iounmap(cookie) #endif diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 06f583b1399..9eb936e49cc 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -18,13 +18,13 @@ struct map_desc { unsigned int type; }; -/* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 +/* types 0-4 are defined in asm/io.h */ +#define MT_CACHECLEAN 5 +#define MT_MINICLEAN 6 +#define MT_LOW_VECTORS 7 +#define MT_HIGH_VECTORS 8 +#define MT_MEMORY 9 +#define MT_ROM 10 #define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED #define MT_IXP2000_DEVICE MT_DEVICE_IXP2000 diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 25d9a11eb61..a713e40e1f1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -211,6 +211,12 @@ static struct mem_type mem_types[] = { PMD_SECT_TEX(1), .domain = DOMAIN_IO, }, + [MT_DEVICE_WC] = { /* ioremap_wc */ + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PROT_SECT_DEVICE, + .domain = DOMAIN_IO, + }, [MT_CACHECLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, @@ -272,6 +278,20 @@ static void __init build_mem_type_table(void) ecc_mask = 0; } + /* + * On non-Xscale3 ARMv5-and-older systems, use CB=01 + * (Uncached/Buffered) for ioremap_wc() mappings. On XScale3 + * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable + * in xsc3 parlance, Uncached Normal in ARMv6 parlance). + */ + if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) { + mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1); + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1); + } else { + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE; + } + /* * ARMv5 and lower, bit 4 must be set for page tables. * (was: cache "update-able on write" bit on ARM610) From 4ff4b9e19a80b73959ebeb28d1df40176686f0a8 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 5 Sep 2008 14:05:31 -0700 Subject: [PATCH 532/638] ntp: fix calculation of the next jiffie to trigger RTC sync We have a bug in the calculation of the next jiffie to trigger the RTC synchronisation. The aim here is to run sync_cmos_clock() as close as possible to the middle of a second. Which means we want this function to be called less than or equal to half a jiffie away from when now.tv_nsec equals 5e8 (500000000). If this is not the case for a given call to the function, for this purpose instead of updating the RTC we calculate the offset in nanoseconds to the next point in time where now.tv_nsec will be equal 5e8. The calculated offset is then converted to jiffies as these are the unit used by the timer. Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode, where the resulting value is rounded up. As a result the range of now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2. As a result if for example sync_cmos_clock() happens to be called at the time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 + TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the same range of now.tv_nsec again. Similarly for cases offsetted by an integer multiple of TICK_NSEC. This change addresses the problem by subtracting TICK_NSEC / 2 from the nanosecond offset to the next point in time where now.tv_nsec will be equal 5e8, effectively shifting the following rounding in timespec_to_jiffies() so that it produces a rounded-to-nearest result. Signed-off-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/time/ntp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 5125ddd8196..1ad46f3df6e 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -245,7 +245,7 @@ static void sync_cmos_clock(unsigned long dummy) if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2) fail = update_persistent_clock(now); - next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec; + next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2); if (next.tv_nsec <= 0) next.tv_nsec += NSEC_PER_SEC; From dfdf748a61a21b7397b9f57c83de722de71dc56a Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 5 Sep 2008 14:05:33 -0700 Subject: [PATCH 533/638] clocksource, acpi_pm.c: use proper read function also in errata mode On all hardware (some Intel ICH4, PIIX4 and PIIX4E chipsets) affected by a hardware errata there's about a 4.2% chance that initialization of the ACPI PMTMR fails. On those chipsets, we need to read out the timer value at least three times to get a correct result, for every once in a while (i.e. within a 3 ns window every 69.8 ns) the read returns a bogus result. During normal operation we work around this issue, but during initialization reading a bogus value may lead to -EINVAL even though the hardware is usable. Thanks to Andreas Mohr for spotting this issue. Signed-off-by: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- drivers/clocksource/acpi_pm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 5ca1d80de18..860d033bc74 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -151,13 +151,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE, */ static int verify_pmtmr_rate(void) { - u32 value1, value2; + cycle_t value1, value2; unsigned long count, delta; mach_prepare_counter(); - value1 = read_pmtmr(); + value1 = clocksource_acpi_pm.read(); mach_countup(&count); - value2 = read_pmtmr(); + value2 = clocksource_acpi_pm.read(); delta = (value2 - value1) & ACPI_PM_MASK; /* Check that the PMTMR delta is within 5% of what we expect */ @@ -177,7 +177,7 @@ static int verify_pmtmr_rate(void) static int __init init_acpi_pm_clocksource(void) { - u32 value1, value2; + cycle_t value1, value2; unsigned int i; if (!pmtmr_ioport) @@ -187,9 +187,9 @@ static int __init init_acpi_pm_clocksource(void) clocksource_acpi_pm.shift); /* "verify" this timing source: */ - value1 = read_pmtmr(); + value1 = clocksource_acpi_pm.read(); for (i = 0; i < 10000; i++) { - value2 = read_pmtmr(); + value2 = clocksource_acpi_pm.read(); if (value2 == value1) continue; if (value2 > value1) @@ -197,11 +197,11 @@ static int __init init_acpi_pm_clocksource(void) if ((value2 < value1) && ((value2) < 0xFFF)) goto pm_good; printk(KERN_INFO "PM-Timer had inconsistent results:" - " 0x%#x, 0x%#x - aborting.\n", value1, value2); + " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); return -EINVAL; } printk(KERN_INFO "PM-Timer had no reasonable result:" - " 0x%#x - aborting.\n", value1); + " 0x%#llx - aborting.\n", value1); return -ENODEV; pm_good: From 4ab6a219113197425ac112e35e1ec8062c69888e Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Fri, 5 Sep 2008 14:05:35 -0700 Subject: [PATCH 534/638] clocksource, acpi_pm.c: check for monotonicity The current check for monotonicity is way too weak: Andreas Mohr reports ( http://lkml.org/lkml/2008/8/10/77 ) that on one of his test systems the current check only triggers in 50% of all cases, leading to catastrophic timer behaviour. To fix this issue, expand the check for monotonicity by doing ten consecutive tests instead of one. Signed-off-by: Dominik Brodowski Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- drivers/clocksource/acpi_pm.c | 46 ++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 860d033bc74..4eee533f3f4 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include /* @@ -175,10 +176,13 @@ static int verify_pmtmr_rate(void) #define verify_pmtmr_rate() (0) #endif +/* Number of monotonicity checks to perform during initialization */ +#define ACPI_PM_MONOTONICITY_CHECKS 10 + static int __init init_acpi_pm_clocksource(void) { cycle_t value1, value2; - unsigned int i; + unsigned int i, j, good = 0; if (!pmtmr_ioport) return -ENODEV; @@ -187,24 +191,32 @@ static int __init init_acpi_pm_clocksource(void) clocksource_acpi_pm.shift); /* "verify" this timing source: */ - value1 = clocksource_acpi_pm.read(); - for (i = 0; i < 10000; i++) { - value2 = clocksource_acpi_pm.read(); - if (value2 == value1) - continue; - if (value2 > value1) - goto pm_good; - if ((value2 < value1) && ((value2) < 0xFFF)) - goto pm_good; - printk(KERN_INFO "PM-Timer had inconsistent results:" - " 0x%#llx, 0x%#llx - aborting.\n", value1, value2); - return -EINVAL; + for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) { + value1 = clocksource_acpi_pm.read(); + for (i = 0; i < 10000; i++) { + value2 = clocksource_acpi_pm.read(); + if (value2 == value1) + continue; + if (value2 > value1) + good++; + break; + if ((value2 < value1) && ((value2) < 0xFFF)) + good++; + break; + printk(KERN_INFO "PM-Timer had inconsistent results:" + " 0x%#llx, 0x%#llx - aborting.\n", + value1, value2); + return -EINVAL; + } + udelay(300 * i); + } + + if (good != ACPI_PM_MONOTONICITY_CHECKS) { + printk(KERN_INFO "PM-Timer failed consistency check " + " (0x%#llx) - aborting.\n", value1); + return -ENODEV; } - printk(KERN_INFO "PM-Timer had no reasonable result:" - " 0x%#llx - aborting.\n", value1); - return -ENODEV; -pm_good: if (verify_pmtmr_rate() != 0) return -ENODEV; From 12cf105cd66d95cf32c73cfa847a50bd1b700f23 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 4 Sep 2008 21:09:43 +0200 Subject: [PATCH 535/638] x86: delay early cpu initialization until cpuid is done Move early cpu initialization after cpu early get cap so the early cpu initialization can fix up cpu caps. Signed-off-by: Krzysztof Helt Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 0785b3c8d04..8aab8517642 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -335,11 +335,11 @@ static void __init early_cpu_detect(void) get_cpu_vendor(c, 1); + early_get_cap(c); + if (c->x86_vendor != X86_VENDOR_UNKNOWN && cpu_devs[c->x86_vendor]->c_early_init) cpu_devs[c->x86_vendor]->c_early_init(c); - - early_get_cap(c); } /* From dd786dd12c99634055a9066f25ea957f29991c22 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 4 Sep 2008 21:09:43 +0200 Subject: [PATCH 536/638] x86: move mtrr cpu cap setting early in early_init_xxxx Krzysztof Helt found MTRR is not detected on k6-2 root cause: we moved mtrr_bp_init() early for mtrr trimming, and in early_detect we only read the CPU capability from cpuid, so some cpu doesn't have that bit in cpuid. So we need to add early_init_xxxx to preset those bit before mtrr_bp_init for those earlier cpus. this patch is for v2.6.27 Reported-by: Krzysztof Helt Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 9 +++++---- arch/x86/kernel/cpu/centaur.c | 11 +++++++++++ arch/x86/kernel/cpu/cyrix.c | 32 ++++++++++++++++++++++++++++---- 3 files changed, 44 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index cae9cabc303..18514ed2610 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) if (c->x86_power & (1<<8)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); } + + /* Set MTRR capability flag if appropriate */ + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_cpu_cap(c, X86_FEATURE_K6_MTRR); } static void __cpuinit init_amd(struct cpuinfo_x86 *c) @@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) mbytes); } - /* Set MTRR capability flag if appropriate */ - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); break; } diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index e0f45edd6a5..a0534c04d38 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -314,6 +314,16 @@ enum { EAMD3D = 1<<20, }; +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 5: + /* Emulate MTRRs using Centaur's MCR. */ + set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); + break; + } +} + static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { @@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, .c_init = init_centaur, .c_size_cache = centaur_size_cache, }; diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index e710a21bb6e..898a5a2002e 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -15,13 +15,11 @@ /* * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU */ -static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; - unsigned long flags; /* we test for DEVID by checking whether CCR3 is writable */ - local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, ccr3 ^ 0x80); getCx86(0xc0); /* dummy to change bus */ @@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) *dir0 = getCx86(CX86_DIR0); *dir1 = getCx86(CX86_DIR1); } - local_irq_restore(flags); } +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +{ + unsigned long flags; + + local_irq_save(flags); + __do_cyrix_devid(dir0, dir1); + local_irq_restore(flags); +} /* * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in * order to identify the Cyrix CPU model after we're out of setup.c @@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void) local_irq_restore(flags); } +static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c) +{ + unsigned char dir0, dir0_msn, dir1 = 0; + + __do_cyrix_devid(&dir0, &dir1); + dir0_msn = dir0 >> 4; /* identifies CPU "family" */ + + switch (dir0_msn) { + case 3: /* 6x86/6x86L */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + case 5: /* 6x86MX/M II */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + } +} static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { @@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, + .c_early_init = early_init_cyrix, .c_init = init_cyrix, .c_identify = cyrix_identify, }; From dfb512ec4834116124da61d6c1ee10fd0aa32bd6 Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Fri, 29 Aug 2008 13:11:41 -0700 Subject: [PATCH 537/638] sched: arch_reinit_sched_domains() must destroy domains to force rebuild What I realized recently is that calling rebuild_sched_domains() in arch_reinit_sched_domains() by itself is not enough when cpusets are enabled. partition_sched_domains() code is trying to avoid unnecessary domain rebuilds and will not actually rebuild anything if new domain masks match the old ones. What this means is that doing echo 1 > /sys/devices/system/cpu/sched_mc_power_savings on a system with cpusets enabled will not take affect untill something changes in the cpuset setup (ie new sets created or deleted). This patch fixes restore correct behaviour where domains must be rebuilt in order to enable MC powersaving flags. Test on quad-core Core2 box with both CONFIG_CPUSETS and !CONFIG_CPUSETS. Also tested on dual-core Core2 laptop. Lockdep is happy and things are working as expected. Signed-off-by: Max Krasnyansky Tested-by: Vaidyanathan Srinivasan Signed-off-by: Ingo Molnar --- include/linux/cpuset.h | 2 +- kernel/sched.c | 19 +++++++++++++------ 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index e8f450c499b..2691926fb50 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -160,7 +160,7 @@ static inline int current_cpuset_is_being_rebound(void) static inline void rebuild_sched_domains(void) { - partition_sched_domains(0, NULL, NULL); + partition_sched_domains(1, NULL, NULL); } #endif /* !CONFIG_CPUSETS */ diff --git a/kernel/sched.c b/kernel/sched.c index d601fb0406c..d72ee9a0eac 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7589,24 +7589,27 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur, * and partition_sched_domains() will fallback to the single partition * 'fallback_doms', it also forces the domains to be rebuilt. * + * If doms_new==NULL it will be replaced with cpu_online_map. + * ndoms_new==0 is a special case for destroying existing domains. + * It will not create the default domain. + * * Call with hotplug lock held */ void partition_sched_domains(int ndoms_new, cpumask_t *doms_new, struct sched_domain_attr *dattr_new) { - int i, j; + int i, j, n; mutex_lock(&sched_domains_mutex); /* always unregister in case we don't destroy any domains */ unregister_sched_domain_sysctl(); - if (doms_new == NULL) - ndoms_new = 0; + n = doms_new ? ndoms_new : 0; /* Destroy deleted domains */ for (i = 0; i < ndoms_cur; i++) { - for (j = 0; j < ndoms_new; j++) { + for (j = 0; j < n; j++) { if (cpus_equal(doms_cur[i], doms_new[j]) && dattrs_equal(dattr_cur, i, dattr_new, j)) goto match1; @@ -7619,7 +7622,6 @@ match1: if (doms_new == NULL) { ndoms_cur = 0; - ndoms_new = 1; doms_new = &fallback_doms; cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map); dattr_new = NULL; @@ -7656,8 +7658,13 @@ match2: int arch_reinit_sched_domains(void) { get_online_cpus(); + + /* Destroy domains first to force the rebuild */ + partition_sched_domains(0, NULL, NULL); + rebuild_sched_domains(); put_online_cpus(); + return 0; } @@ -7741,7 +7748,7 @@ static int update_sched_domains(struct notifier_block *nfb, case CPU_ONLINE_FROZEN: case CPU_DEAD: case CPU_DEAD_FROZEN: - partition_sched_domains(0, NULL, NULL); + partition_sched_domains(1, NULL, NULL); return NOTIFY_OK; default: From e4a6be4d2850da032a782b5296c07dfdf583af86 Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Thu, 24 Jul 2008 12:15:45 -0300 Subject: [PATCH 538/638] x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flags Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by: Eduardo Habkost Acked-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 9ff6e3cbf08..a4e201b47f6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .ptep_modify_prot_commit = __ptep_modify_prot_commit, .pte_val = xen_pte_val, - .pte_flags = native_pte_val, + .pte_flags = native_pte_flags, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, From d04ec773d7ca1bbc05a2768be95c1cebe2b07757 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 6 Aug 2008 10:27:30 +0200 Subject: [PATCH 539/638] x86: pda_init(): fix memory leak when using CPU hotplug pda->irqstackptr is allocated whenever a CPU is set online. But it is never freed. This results in a memory leak of 16K for each CPU offline/online cycle. Fix is to allocate pda->irqstackptr only once. Signed-off-by: Andreas Herrmann Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common_64.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index c3afba5a81a..4f2eeb5652e 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -529,17 +529,20 @@ void pda_init(int cpu) /* others are initialized in smpboot.c */ pda->pcurrent = &init_task; pda->irqstackptr = boot_cpu_stack; + pda->irqstackptr += IRQSTACKSIZE - 64; } else { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", cpu); + if (!pda->irqstackptr) { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", + cpu); + pda->irqstackptr += IRQSTACKSIZE - 64; + } if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) pda->nodenumber = cpu_to_node(cpu); } - - pda->irqstackptr += IRQSTACKSIZE-64; } char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + From 23952a96ae738277f3139b63d622e22984589031 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 6 Aug 2008 10:29:37 +0200 Subject: [PATCH 540/638] x86: cpu_init(): fix memory leak when using CPU hotplug Exception stacks are allocated each time a CPU is set online. But the allocated space is never freed. Thus with one CPU hotplug offline/online cycle there is a memory leak of 24K (6 pages) for a CPU. Fix is to allocate exception stacks only once -- when the CPU is set online for the first time. Signed-off-by: Andreas Herrmann Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common_64.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index 4f2eeb5652e..a11f5d4477c 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -640,19 +640,22 @@ void __cpuinit cpu_init(void) /* * set up and load the per-CPU TSS */ - for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (!orig_ist->ist[0]) { static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER }; - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception stack %ld %d\n", - v, cpu); + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception " + "stack %ld %d\n", v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->x86_tss.ist[v] = + (unsigned long)estacks; } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; } t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); From b2e601d14deb2083e2a537b47869ab3895d23a28 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Thu, 4 Sep 2008 21:16:27 +0000 Subject: [PATCH 541/638] powerpc/spufs: Fix possible scheduling of a context to multiple SPEs We currently have a race when scheduling a context to a SPE - after we have found a runnable context in spusched_tick, the same context may have been scheduled by spu_activate(). This may result in a panic if we try to unschedule a context that has been freed in the meantime. This change exits spu_schedule() if the context has already been scheduled, so we don't end up scheduling it twice. Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 897c7406116..67595bc380d 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -728,7 +728,8 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx) /* not a candidate for interruptible because it's called either from the scheduler thread or from spu_deactivate */ mutex_lock(&ctx->state_mutex); - __spu_schedule(spu, ctx); + if (ctx->state == SPU_STATE_SAVED) + __spu_schedule(spu, ctx); spu_release(ctx); } From 66bf79182d6531c14c1f9a507b6bbf374a2ae4cd Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 7 Sep 2008 18:19:25 -0700 Subject: [PATCH 542/638] netfilter: nf_conntrack_sip: de-static helper pointers Helper's ->help hook can run concurrently with itself, so iterating over SIP helpers with static pointer won't work reliably. Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_sip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 2f9bbc058b4..1fa306be60f 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1193,7 +1193,6 @@ static const struct sip_handler sip_handlers[] = { static int process_sip_response(struct sk_buff *skb, const char **dptr, unsigned int *datalen) { - static const struct sip_handler *handler; enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); unsigned int matchoff, matchlen; @@ -1214,6 +1213,8 @@ static int process_sip_response(struct sk_buff *skb, dataoff = matchoff + matchlen + 1; for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) { + const struct sip_handler *handler; + handler = &sip_handlers[i]; if (handler->response == NULL) continue; @@ -1228,13 +1229,14 @@ static int process_sip_response(struct sk_buff *skb, static int process_sip_request(struct sk_buff *skb, const char **dptr, unsigned int *datalen) { - static const struct sip_handler *handler; enum ip_conntrack_info ctinfo; struct nf_conn *ct = nf_ct_get(skb, &ctinfo); unsigned int matchoff, matchlen; unsigned int cseq, i; for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) { + const struct sip_handler *handler; + handler = &sip_handlers[i]; if (handler->request == NULL) continue; From 887464a41fde7e9e1e11ca86748338033c502446 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 7 Sep 2008 18:20:08 -0700 Subject: [PATCH 543/638] netfilter: nf_conntrack_gre: more locking around keymap list gre_keymap_list should be protected in all places. (unless I'm misreading something) Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_proto_gre.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c index 654a4f7f12c..b308bb4c12b 100644 --- a/net/netfilter/nf_conntrack_proto_gre.c +++ b/net/netfilter/nf_conntrack_proto_gre.c @@ -97,10 +97,14 @@ int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir, kmp = &help->help.ct_pptp_info.keymap[dir]; if (*kmp) { /* check whether it's a retransmission */ + read_lock_bh(&nf_ct_gre_lock); list_for_each_entry(km, &gre_keymap_list, list) { - if (gre_key_cmpfn(km, t) && km == *kmp) + if (gre_key_cmpfn(km, t) && km == *kmp) { + read_unlock_bh(&nf_ct_gre_lock); return 0; + } } + read_unlock_bh(&nf_ct_gre_lock); pr_debug("trying to override keymap_%s for ct %p\n", dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct); return -EEXIST; From 51807e91a76a531d059ec7ce3395c435e4df52a8 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sun, 7 Sep 2008 18:20:36 -0700 Subject: [PATCH 544/638] netfilter: nf_conntrack_gre: nf_ct_gre_keymap_flush() fixlet It does "kfree(list_head)" which looks wrong because entity that was allocated is definitely not list_head. However, this all works because list_head is first item in struct nf_ct_gre_keymap. Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_proto_gre.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c index b308bb4c12b..9bd03967fea 100644 --- a/net/netfilter/nf_conntrack_proto_gre.c +++ b/net/netfilter/nf_conntrack_proto_gre.c @@ -45,12 +45,12 @@ static LIST_HEAD(gre_keymap_list); void nf_ct_gre_keymap_flush(void) { - struct list_head *pos, *n; + struct nf_ct_gre_keymap *km, *tmp; write_lock_bh(&nf_ct_gre_lock); - list_for_each_safe(pos, n, &gre_keymap_list) { - list_del(pos); - kfree(pos); + list_for_each_entry_safe(km, tmp, &gre_keymap_list, list) { + list_del(&km->list); + kfree(km); } write_unlock_bh(&nf_ct_gre_lock); } From e3b802ba885b54f4050164c3cfd9e0ba9c73173a Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Sun, 7 Sep 2008 18:21:24 -0700 Subject: [PATCH 545/638] netfilter: nf_conntrack_irc: make sure string is terminated before calling simple_strtoul Alexey Dobriyan points out: 1. simple_strtoul() silently accepts all characters for given base even if result won't fit into unsigned long. This is amazing stupidity in itself, but 2. nf_conntrack_irc helper use simple_strtoul() for DCC request parsing. Data first copied into 64KB buffer, so theoretically nothing prevents reading past the end of it, since data comes from network given 1). This is not actually a problem currently since we're guaranteed to have a 0 byte in skb_shared_info or in the buffer the data is copied to, but to make this more robust, make sure the string is actually terminated. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_irc.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c index 1b1226d6653..20633fdf7e6 100644 --- a/net/netfilter/nf_conntrack_irc.c +++ b/net/netfilter/nf_conntrack_irc.c @@ -68,11 +68,21 @@ static const char *const dccprotos[] = { static int parse_dcc(char *data, const char *data_end, u_int32_t *ip, u_int16_t *port, char **ad_beg_p, char **ad_end_p) { + char *tmp; + /* at least 12: "AAAAAAAA P\1\n" */ while (*data++ != ' ') if (data > data_end - 12) return -1; + /* Make sure we have a newline character within the packet boundaries + * because simple_strtoul parses until the first invalid character. */ + for (tmp = data; tmp <= data_end; tmp++) + if (*tmp == '\n') + break; + if (tmp > data_end || *tmp != '\n') + return -1; + *ad_beg_p = data; *ip = simple_strtoul(data, &data, 10); From e8a83e10d7dfe5d0841062780769b30f65417e15 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Sun, 7 Sep 2008 18:41:21 -0700 Subject: [PATCH 546/638] pkt_sched: Fix qdisc state in net_tx_action() net_tx_action() can skip __QDISC_STATE_SCHED bit clearing while qdisc is neither ran nor rescheduled, which may cause endless loop in dev_deactivate(). Reported-by: Denys Fedoryshchenko Tested-by: Denys Fedoryshchenko Signed-off-by: Jarek Poplawski Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 60c51f76588..e719ed29310 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1991,8 +1991,13 @@ static void net_tx_action(struct softirq_action *h) spin_unlock(root_lock); } else { if (!test_bit(__QDISC_STATE_DEACTIVATED, - &q->state)) + &q->state)) { __netif_reschedule(q); + } else { + smp_mb__before_clear_bit(); + clear_bit(__QDISC_STATE_SCHED, + &q->state); + } } } } From f4c4cd6d14e3a3f638475f2f83e26765a7d3327b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 8 Sep 2008 14:29:54 +1000 Subject: [PATCH 547/638] Revert "crypto: camellia - Use kernel-provided bitops, unaligned access helpers" This reverts commit bd699f2df6dbc2f4cba528fe598bd63a4d3702c5, which causes camellia to fail the included self-test vectors. It has also been confirmed that it breaks existing encrypted disks using camellia. Signed-off-by: Herbert Xu --- crypto/camellia.c | 84 +++++++++++++++++++++++++++-------------------- 1 file changed, 48 insertions(+), 36 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index b1cc4de6493..493fee7e0a8 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -35,8 +35,6 @@ #include #include #include -#include -#include static const u32 camellia_sp1110[256] = { 0x70707000,0x82828200,0x2c2c2c00,0xececec00, @@ -337,6 +335,20 @@ static const u32 camellia_sp4404[256] = { /* * macros */ +#define GETU32(v, pt) \ + do { \ + /* latest breed of gcc is clever enough to use move */ \ + memcpy(&(v), (pt), 4); \ + (v) = be32_to_cpu(v); \ + } while(0) + +/* rotation right shift 1byte */ +#define ROR8(x) (((x) >> 8) + ((x) << 24)) +/* rotation left shift 1bit */ +#define ROL1(x) (((x) << 1) + ((x) >> 31)) +/* rotation left shift 1byte */ +#define ROL8(x) (((x) << 8) + ((x) >> 24)) + #define ROLDQ(ll, lr, rl, rr, w0, w1, bits) \ do { \ w0 = ll; \ @@ -371,7 +383,7 @@ static const u32 camellia_sp4404[256] = { ^ camellia_sp3033[(u8)(il >> 8)] \ ^ camellia_sp4404[(u8)(il )]; \ yl ^= yr; \ - yr = ror32(yr, 8); \ + yr = ROR8(yr); \ yr ^= yl; \ } while(0) @@ -393,7 +405,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) subL[7] ^= subL[1]; subR[7] ^= subR[1]; subL[1] ^= subR[1] & ~subR[9]; dw = subL[1] & subL[9], - subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ /* round 8 */ subL[11] ^= subL[1]; subR[11] ^= subR[1]; /* round 10 */ @@ -402,7 +414,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) subL[15] ^= subL[1]; subR[15] ^= subR[1]; subL[1] ^= subR[1] & ~subR[17]; dw = subL[1] & subL[17], - subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ /* round 14 */ subL[19] ^= subL[1]; subR[19] ^= subR[1]; /* round 16 */ @@ -418,7 +430,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) } else { subL[1] ^= subR[1] & ~subR[25]; dw = subL[1] & subL[25], - subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */ /* round 20 */ subL[27] ^= subL[1]; subR[27] ^= subR[1]; /* round 22 */ @@ -438,7 +450,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) subL[26] ^= kw4l; subR[26] ^= kw4r; kw4l ^= kw4r & ~subR[24]; dw = kw4l & subL[24], - kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */ + kw4r ^= ROL1(dw); /* modified for FL(kl5) */ } /* round 17 */ subL[22] ^= kw4l; subR[22] ^= kw4r; @@ -448,7 +460,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) subL[18] ^= kw4l; subR[18] ^= kw4r; kw4l ^= kw4r & ~subR[16]; dw = kw4l & subL[16], - kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */ + kw4r ^= ROL1(dw); /* modified for FL(kl3) */ /* round 11 */ subL[14] ^= kw4l; subR[14] ^= kw4r; /* round 9 */ @@ -457,7 +469,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) subL[10] ^= kw4l; subR[10] ^= kw4r; kw4l ^= kw4r & ~subR[8]; dw = kw4l & subL[8], - kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */ + kw4r ^= ROL1(dw); /* modified for FL(kl1) */ /* round 5 */ subL[6] ^= kw4l; subR[6] ^= kw4r; /* round 3 */ @@ -482,7 +494,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) SUBKEY_R(6) = subR[5] ^ subR[7]; tl = subL[10] ^ (subR[10] & ~subR[8]); dw = tl & subL[8], /* FL(kl1) */ - tr = subR[10] ^ rol32(dw, 1); + tr = subR[10] ^ ROL1(dw); SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ SUBKEY_R(7) = subR[6] ^ tr; SUBKEY_L(8) = subL[8]; /* FL(kl1) */ @@ -491,7 +503,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) SUBKEY_R(9) = subR[9]; tl = subL[7] ^ (subR[7] & ~subR[9]); dw = tl & subL[9], /* FLinv(kl2) */ - tr = subR[7] ^ rol32(dw, 1); + tr = subR[7] ^ ROL1(dw); SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ SUBKEY_R(10) = tr ^ subR[11]; SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ @@ -504,7 +516,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) SUBKEY_R(14) = subR[13] ^ subR[15]; tl = subL[18] ^ (subR[18] & ~subR[16]); dw = tl & subL[16], /* FL(kl3) */ - tr = subR[18] ^ rol32(dw, 1); + tr = subR[18] ^ ROL1(dw); SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ SUBKEY_R(15) = subR[14] ^ tr; SUBKEY_L(16) = subL[16]; /* FL(kl3) */ @@ -513,7 +525,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) SUBKEY_R(17) = subR[17]; tl = subL[15] ^ (subR[15] & ~subR[17]); dw = tl & subL[17], /* FLinv(kl4) */ - tr = subR[15] ^ rol32(dw, 1); + tr = subR[15] ^ ROL1(dw); SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ SUBKEY_R(18) = tr ^ subR[19]; SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ @@ -532,7 +544,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) } else { tl = subL[26] ^ (subR[26] & ~subR[24]); dw = tl & subL[24], /* FL(kl5) */ - tr = subR[26] ^ rol32(dw, 1); + tr = subR[26] ^ ROL1(dw); SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ SUBKEY_R(23) = subR[22] ^ tr; SUBKEY_L(24) = subL[24]; /* FL(kl5) */ @@ -541,7 +553,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) SUBKEY_R(25) = subR[25]; tl = subL[23] ^ (subR[23] & ~subR[25]); dw = tl & subL[25], /* FLinv(kl6) */ - tr = subR[23] ^ rol32(dw, 1); + tr = subR[23] ^ ROL1(dw); SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ SUBKEY_R(26) = tr ^ subR[27]; SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ @@ -561,17 +573,17 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) /* apply the inverse of the last half of P-function */ i = 2; do { - dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */ + dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */ SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw; - dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */ + dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */ SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw; - dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */ + dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */ SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw; - dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */ + dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */ SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw; - dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */ + dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */ SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw; - dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */ + dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */ SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw; i += 8; } while (i < max); @@ -587,10 +599,10 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /** * k == kll || klr || krl || krr (|| is concatenation) */ - kll = get_unaligned_be32(key); - klr = get_unaligned_be32(key + 4); - krl = get_unaligned_be32(key + 8); - krr = get_unaligned_be32(key + 12); + GETU32(kll, key ); + GETU32(klr, key + 4); + GETU32(krl, key + 8); + GETU32(krr, key + 12); /* generate KL dependent subkeys */ /* kw1 */ @@ -695,14 +707,14 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) * key = (kll || klr || krl || krr || krll || krlr || krrl || krrr) * (|| is concatenation) */ - kll = get_unaligned_be32(key); - klr = get_unaligned_be32(key + 4); - krl = get_unaligned_be32(key + 8); - krr = get_unaligned_be32(key + 12); - krll = get_unaligned_be32(key + 16); - krlr = get_unaligned_be32(key + 20); - krrl = get_unaligned_be32(key + 24); - krrr = get_unaligned_be32(key + 28); + GETU32(kll, key ); + GETU32(klr, key + 4); + GETU32(krl, key + 8); + GETU32(krr, key + 12); + GETU32(krll, key + 16); + GETU32(krlr, key + 20); + GETU32(krrl, key + 24); + GETU32(krrr, key + 28); /* generate KL dependent subkeys */ /* kw1 */ @@ -858,13 +870,13 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) t0 &= ll; \ t2 |= rr; \ rl ^= t2; \ - lr ^= rol32(t0, 1); \ + lr ^= ROL1(t0); \ t3 = krl; \ t1 = klr; \ t3 &= rl; \ t1 |= lr; \ ll ^= t1; \ - rr ^= rol32(t3, 1); \ + rr ^= ROL1(t3); \ } while(0) #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \ @@ -880,7 +892,7 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) il ^= kl; \ ir ^= il ^ kr; \ yl ^= ir; \ - yr ^= ror32(il, 8) ^ ir; \ + yr ^= ROR8(il) ^ ir; \ } while(0) /* max = 24: 128bit encrypt, max = 32: 256bit encrypt */ From 4ff23fa93011e2367fea056e72c92709178972d9 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sun, 7 Sep 2008 00:35:48 +0100 Subject: [PATCH 548/638] powerpc: Fix rare boot build breakage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A make -j20 powerpc kernel build broke a couple of months ago saying: In file included from arch/powerpc/boot/gunzip_util.h:13, from arch/powerpc/boot/prpmc2800.c:21: arch/powerpc/boot/zlib.h:85: error: expected ‘:’, ‘,’, ‘;’, ‘}’ or ‘__attribute__’ before ‘*’ token arch/powerpc/boot/zlib.h:630: warning: type defaults to ‘int’ in declaration of ‘Byte’ arch/powerpc/boot/zlib.h:630: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token It happened again yesterday: too rare for me to confirm the fix, but it looks like the list of dependants on gunzip_util.h was incomplete. Signed-off-by: Hugh Dickins Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 14174aa2407..717a3bc1352 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -49,7 +49,7 @@ zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h -$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ +$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c From 5b66c829bf5c65663b2f68ee6b42f6e834cd39cd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 3 Sep 2008 14:48:34 +0100 Subject: [PATCH 549/638] ahci, pata_marvell: play nicely together I've been chasing Jeff about this for months. Jeff added the Marvell device identifiers to the ahci driver without making the AHCI driver handle the PATA port. This means a lot of users can't use current kernels and in most distro cases can't even install. This has been going on since March 2008 for the 6121 Marvell, and late 2007 for the 6145!!! This was all pointed out at the time and repeatedly ignored. Bugs assigned to Jeff about this are ignored also. To quote Jeff in email > "Just switch the order of 'ahci' and 'pata_marvell' in > /etc/modprobe.conf, then use Fedora's tools regenerate the initrd. > See? It's not rocket science, and the current configuration can be > easily made to work for Fedora users." (Which isn't trivial, isn't end user, shouldn't be needed, and as it usually breaks at install time is in fact impossible) To quote Jeff in August 2007 > " mv-ahci-pata > Marvell 6121/6141 PATA support. Needs fixing in the 'PATA controller > command' area before it is usable, and can go upstream." Only he add the ids anyway later and caused regressions, adding a further id in March causing more regresions. The actual fix for the moment is very simple. If the user has included the pata_marvell driver let it drive the ports. If they've only selected for SATA support give them the AHCI driver which will run the port a fraction faster. Allow the user to control this decision via ahci.marvell_enable as a module parameter so that distributions can ship 'it works' defaults and smarter users (or config tools) can then flip it over it desired. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 6 ++-- drivers/ata/ahci.c | 17 ++++++++++ drivers/ata/pata_marvell.c | 65 ++++++++++++++++++++++++++------------ 3 files changed, 66 insertions(+), 22 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ae8494944c4..11c8c19f0fb 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -448,8 +448,10 @@ config PATA_MARVELL tristate "Marvell PATA support via legacy mode" depends on PCI help - This option enables limited support for the Marvell 88SE6145 ATA - controller. + This option enables limited support for the Marvell 88SE61xx ATA + controllers. If you wish to use only the SATA ports then select + the AHCI driver alone. If you wish to the use the PATA port or + both SATA and PATA include this driver. If unsure, say N. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c729e6988bb..bce26ee3806 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -610,6 +610,15 @@ module_param(ahci_em_messages, int, 0444); MODULE_PARM_DESC(ahci_em_messages, "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + static inline int ahci_nr_ports(u32 cap) { return (cap & 0x1f) + 1; @@ -732,6 +741,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev, "MV_AHCI HACK: port_map %x -> %x\n", port_map, port_map & mv); + dev_printk(KERN_ERR, &pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); port_map &= mv; } @@ -2533,6 +2544,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 24a011b2502..0d87eec8496 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -20,7 +20,42 @@ #include #define DRV_NAME "pata_marvell" -#define DRV_VERSION "0.1.4" +#define DRV_VERSION "0.1.6" + +/** + * marvell_pata_active - check if PATA is active + * @pdev: PCI device + * + * Returns 1 if the PATA port may be active. We know how to check this + * for the 6145 but not the other devices + */ + +static int marvell_pata_active(struct pci_dev *pdev) +{ + int i; + u32 devices; + void __iomem *barp; + + /* We don't yet know how to do this for other devices */ + if (pdev->device != 0x6145) + return 1; + + barp = pci_iomap(pdev, 5, 0x10); + if (barp == NULL) + return -ENOMEM; + + printk("BAR5:"); + for(i = 0; i <= 0x0F; i++) + printk("%02X:%02X ", i, ioread8(barp + i)); + printk("\n"); + + devices = ioread32(barp + 0x0C); + pci_iounmap(pdev, barp); + + if (devices & 0x10) + return 1; + return 0; +} /** * marvell_pre_reset - check for 40/80 pin @@ -34,26 +69,10 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline) { struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u32 devices; - void __iomem *barp; - int i; - /* Check if our port is enabled */ - - barp = pci_iomap(pdev, 5, 0x10); - if (barp == NULL) - return -ENOMEM; - printk("BAR5:"); - for(i = 0; i <= 0x0F; i++) - printk("%02X:%02X ", i, ioread8(barp + i)); - printk("\n"); - - devices = ioread32(barp + 0x0C); - pci_iounmap(pdev, barp); - - if ((pdev->device == 0x6145) && (ap->port_no == 0) && - (!(devices & 0x10))) /* PATA enable ? */ - return -ENOENT; + if (pdev->device == 0x6145 && ap->port_no == 0 && + !marvell_pata_active(pdev)) /* PATA enable ? */ + return -ENOENT; return ata_sff_prereset(link, deadline); } @@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i if (pdev->device == 0x6101) ppi[1] = &ata_dummy_port_info; +#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE) + if (!marvell_pata_active(pdev)) { + printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); + return -ENODEV; + } +#endif return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL); } From 46c5784c8fa736c2bb42fe681189b86e99abdc2e Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Thu, 4 Sep 2008 18:21:07 -0400 Subject: [PATCH 550/638] sata_mv: add RocketRaid 1720 PCI ID to driver Signed-off-by: Petr Jelen Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 13c1d2af18a..c815f8ecf6e 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x5041), chip_504x }, { PCI_VDEVICE(MARVELL, 0x5080), chip_5080 }, { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, - /* RocketRAID 1740/174x have different identifiers */ + /* RocketRAID 1720/174x have different identifiers */ + { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, { PCI_VDEVICE(TTI, 0x1740), chip_508x }, { PCI_VDEVICE(TTI, 0x1742), chip_508x }, From 17248461cb66103b87ff03bdee34aa61035cc93e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 29 Aug 2008 16:03:59 +0200 Subject: [PATCH 551/638] ahci: disable PMP for marvell ahcis Marvell ahcis don't play nicely with PMPs. Disable it. Reported by KueiHuan Chen in the following thread. http://thread.gmane.org/gmane.linux.ide/33296 Signed-off-by: Tejun Heo Cc: KueiHuan Chen Cc: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index bce26ee3806..66aa146bf4d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_mv */ { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_MV_PATA), + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, .pio_mask = 0x1f, /* pio0-4 */ From 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 29 Aug 2008 16:13:12 +0200 Subject: [PATCH 552/638] sata_nv: disable hardreset for generic of them being unifying probing, hotplug and EH reset paths uniform. Previously, broken hardreset could go unnoticed as it wasn't used during probing but when something goes wrong or after hotplug the problem will surface and bite hard. OSDL bug 11195 reports that sata_nv generic flavor falls into this category. Hardreset itself succeeds but PHY stays offline after hardreset. I tried longer debounce timing but the result was the same. http://bugzilla.kernel.org/show_bug.cgi?id=11195 So, it seems we'll have to drop hardreset from the generic flavor. Signed-off-by: Tejun Heo Cc: Peer Chen Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 858f70610ed..1e1f3f3757a 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static int nv_adma_slave_config(struct scsi_device *sdev); static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc); static void nv_adma_qc_prep(struct ata_queued_cmd *qc); @@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = { static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, - .hardreset = nv_hardreset, + .hardreset = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, }; @@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap) ata_sff_thaw(ap); } -static int nv_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int rc; - - /* SATA hardreset fails to retrieve proper device signature on - * some controllers. Request follow up SRST. For more info, - * see http://bugzilla.kernel.org/show_bug.cgi?id=3352 - */ - rc = sata_sff_hardreset(link, class, deadline); - if (rc) - return rc; - return -EAGAIN; -} - static void nv_adma_error_handler(struct ata_port *ap) { struct nv_adma_port_priv *pp = ap->private_data; From 9c2676b61a5a4b6d99e65fb2f438fb3914302eda Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 29 Aug 2008 16:27:43 +0200 Subject: [PATCH 553/638] libata-sff: kill spurious WARN_ON() in ata_hsm_move() On HSM_ST_ERR, ata_hsm_move() triggers WARN_ON() if AC_ERR_DEV or AC_ERR_HSM is not set. PHY events may trigger HSM_ST_ERR with other error codes and, with or without it, there just isn't much reason to do WARN_ON() on it. Even if error code is not set there, core EH logic won't have any problem dealing with the error condition. OSDL bz#11065 reports this problem. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 304fdc6f1dc..2a4c516894f 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1315,11 +1315,6 @@ fsm_start: break; case HSM_ST_ERR: - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM))); - ap->hsm_task_state = HSM_ST_IDLE; /* complete taskfile transaction */ From de058cdea65842ed4bf17da6b50d6fe6b120a6ef Mon Sep 17 00:00:00 2001 From: David Milburn Date: Fri, 29 Aug 2008 10:36:28 -0500 Subject: [PATCH 554/638] pata_sil680: remove duplicate pcim_enable_device Remove duplicate call to pcim_enable_device in sil680_init_one. Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/pata_sil680.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 720b8645f58..e970b227fbc 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, /* Try to acquire MMIO resources and fallback to PIO if * that fails */ - rc = pcim_enable_device(pdev); - if (rc) - return rc; rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME); if (rc) goto use_ioports; From 8e48b6b307085ce8a747cf94294742f7b7a11b18 Mon Sep 17 00:00:00 2001 From: Seth Heasley Date: Wed, 27 Aug 2008 16:47:22 -0700 Subject: [PATCH 555/638] ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs Add the Intel Ibex Peak (PCH) SATA RAID Controller DeviceIDs. Signed-off-by: Seth Heasley Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 66aa146bf4d..2e1a7cb2ed5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, From 4a911b1efe219fa3c8af697be0054c72e13bdae4 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 4 Sep 2008 23:05:45 +0200 Subject: [PATCH 556/638] [MIPS] IP22: Fix detection of second HPC3 on Challenge S The second HPC3 could be found only on Guiness systems (Challenge-S), but not on fullhouse (Indigo2) systems. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 60141235ec4..52486c4d2b0 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void) return res; /* Second HPC is missing? */ - if (!ip22_is_fullhouse() || + if (ip22_is_fullhouse() || get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) return 0; From 0253398ca1df7e1d2bfbb452175c964a0862482c Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 8 Sep 2008 09:54:49 -0700 Subject: [PATCH 557/638] xen: fix 2.6.27-rc5 xen balloon driver warnings Set the class so it doesn't clash with the normal memory class. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar =================================================================== --- drivers/xen/balloon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index d4427cb8697..2e15da5459c 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -60,7 +60,7 @@ #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10)) -#define BALLOON_CLASS_NAME "memory" +#define BALLOON_CLASS_NAME "xen_memory" struct balloon_stats { /* We aim for 'current allocation' == 'target allocation'. */ From 5c89468c12899b84886cb47eec93f0c88e0f896a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 8 Sep 2008 19:44:17 +0200 Subject: [PATCH 558/638] udf: add llseek method UDF currently doesn't set a llseek method for regular files, which means it will fall back to default_llseek. This means no one can seek beyond 2 Gigabytes on udf, and that there's not protection vs the i_size updates from writers. Signed-off-by: Christoph Hellwig Signed-off-by: Jan Kara --- fs/udf/file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/udf/file.c b/fs/udf/file.c index 0ed6e146a0d..eb91f3b7032 100644 --- a/fs/udf/file.c +++ b/fs/udf/file.c @@ -211,6 +211,7 @@ const struct file_operations udf_file_operations = { .release = udf_release_file, .fsync = udf_fsync_file, .splice_read = generic_file_splice_read, + .llseek = generic_file_llseek, }; const struct inode_operations udf_file_inode_operations = { From 14469a8dd23677921db5e7354a602c98d9c6300f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Sep 2008 09:30:14 -0700 Subject: [PATCH 559/638] x86: disable static NOPLs on 32 bits On 32-bit, at least the generic nops are fairly reasonable, but the default nops for 64-bit really look pretty sad, and the P6 nops really do look better. So I would suggest perhaps moving the static P6 nop selection into the CONFIG_X86_64 thing. The alternative is to just get rid of that static nop selection, and just have two cases: 32-bit and 64-bit, and just pick obviously safe cases for them. Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig.cpu | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2c518fbc52e..b225219c448 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -382,14 +382,17 @@ config X86_OOSTORE # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. # Furthermore, AMD chips prefer a totally different sequence of NOPs -# (which work on all CPUs). As a result, disallow these if we're -# compiling X86_GENERIC but not X86_64 (these NOPs do work on all -# x86-64 capable chips); the list of processors in the right-hand clause -# are the cores that benefit from this optimization. +# (which work on all CPUs). In addition, it looks like Virtual PC +# does not understand them. +# +# As a result, disallow these if we're not compiling for X86_64 (these +# NOPs do work on all x86-64 capable chips); the list of processors in +# the right-hand clause are the cores that benefit from this optimization. # config X86_P6_NOP def_bool y - depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC) + depends on X86_64 + depends on (MCORE2 || MPENTIUM4 || MPSC) config X86_TSC def_bool y From d315492b1a6ba29da0fa2860759505ae1b2db857 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Mon, 8 Sep 2008 13:17:27 -0700 Subject: [PATCH 560/638] netns : fix kernel panic in timewait socket destruction How to reproduce ? - create a network namespace - use tcp protocol and get timewait socket - exit the network namespace - after a moment (when the timewait socket is destroyed), the kernel panics. # BUG: unable to handle kernel NULL pointer dereference at 0000000000000007 IP: [] inet_twdr_do_twkill_work+0x6e/0xb8 PGD 119985067 PUD 11c5c0067 PMD 0 Oops: 0000 [1] SMP CPU 1 Modules linked in: ipv6 button battery ac loop dm_mod tg3 libphy ext3 jbd edd fan thermal processor thermal_sys sg sata_svw libata dock serverworks sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table] Pid: 0, comm: swapper Not tainted 2.6.27-rc2 #3 RIP: 0010:[] [] inet_twdr_do_twkill_work+0x6e/0xb8 RSP: 0018:ffff88011ff7fed0 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffffffff82339420 RCX: ffff88011ff7ff30 RDX: 0000000000000001 RSI: ffff88011a4d03c0 RDI: ffff88011ac2fc00 RBP: ffffffff823392e0 R08: 0000000000000000 R09: ffff88002802a200 R10: ffff8800a5c4b000 R11: ffffffff823e4080 R12: ffff88011ac2fc00 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000041cbd940(0000) GS:ffff8800bff839c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000007 CR3: 00000000bd87c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff8800bff9e000, task ffff88011ff76690) Stack: ffffffff823392e0 0000000000000100 ffffffff821e3a3a 0000000000000008 0000000000000000 ffffffff821e3a61 ffff8800bff7c000 ffffffff8203c7e7 ffff88011ff7ff10 ffff88011ff7ff10 0000000000000021 ffffffff82351108 Call Trace: [] ? inet_twdr_hangman+0x0/0x9e [] ? inet_twdr_hangman+0x27/0x9e [] ? run_timer_softirq+0x12c/0x193 [] ? __do_softirq+0x5e/0xcd [] ? call_softirq+0x1c/0x28 [] ? do_softirq+0x2c/0x68 [] ? smp_apic_timer_interrupt+0x8e/0xa9 [] ? apic_timer_interrupt+0x66/0x70 [] ? default_idle+0x27/0x3b [] ? cpu_idle+0x5f/0x7d Code: e8 01 00 00 4c 89 e7 41 ff c5 e8 8d fd ff ff 49 8b 44 24 38 4c 89 e7 65 8b 14 25 24 00 00 00 89 d2 48 8b 80 e8 00 00 00 48 f7 d0 <48> 8b 04 d0 48 ff 40 58 e8 fc fc ff ff 48 89 df e8 c0 5f 04 00 RIP [] inet_twdr_do_twkill_work+0x6e/0xb8 RSP CR2: 0000000000000007 This patch provides a function to purge all timewait sockets related to a network namespace. The timewait sockets life cycle is not tied with the network namespace, that means the timewait sockets stay alive while the network namespace dies. The timewait sockets are for avoiding to receive a duplicate packet from the network, if the network namespace is freed, the network stack is removed, so no chance to receive any packets from the outside world. Furthermore, having a pending destruction timer on these sockets with a network namespace freed is not safe and will lead to an oops if the timer callback which try to access data belonging to the namespace like for example in: inet_twdr_do_twkill_work -> NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITED); Purging the timewait sockets at the network namespace destruction will: 1) speed up memory freeing for the namespace 2) fix kernel panic on asynchronous timewait destruction Signed-off-by: Daniel Lezcano Acked-by: Denis V. Lunev Acked-by: Eric W. Biederman Signed-off-by: David S. Miller --- include/net/inet_timewait_sock.h | 3 +++ net/ipv4/inet_timewait_sock.c | 35 ++++++++++++++++++++++++++++++++ net/ipv4/tcp_ipv4.c | 1 + net/ipv6/tcp_ipv6.c | 1 + 4 files changed, 40 insertions(+) diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h index 95c660c9719..91324908fcc 100644 --- a/include/net/inet_timewait_sock.h +++ b/include/net/inet_timewait_sock.h @@ -208,6 +208,9 @@ extern void inet_twsk_schedule(struct inet_timewait_sock *tw, extern void inet_twsk_deschedule(struct inet_timewait_sock *tw, struct inet_timewait_death_row *twdr); +extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo, + struct inet_timewait_death_row *twdr, int family); + static inline struct net *twsk_net(const struct inet_timewait_sock *twsk) { diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c index d985bd613d2..743f011b9a8 100644 --- a/net/ipv4/inet_timewait_sock.c +++ b/net/ipv4/inet_timewait_sock.c @@ -409,3 +409,38 @@ out: } EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick); + +void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo, + struct inet_timewait_death_row *twdr, int family) +{ + struct inet_timewait_sock *tw; + struct sock *sk; + struct hlist_node *node; + int h; + + local_bh_disable(); + for (h = 0; h < (hashinfo->ehash_size); h++) { + struct inet_ehash_bucket *head = + inet_ehash_bucket(hashinfo, h); + rwlock_t *lock = inet_ehash_lockp(hashinfo, h); +restart: + write_lock(lock); + sk_for_each(sk, node, &head->twchain) { + + tw = inet_twsk(sk); + if (!net_eq(twsk_net(tw), net) || + tw->tw_family != family) + continue; + + atomic_inc(&tw->tw_refcnt); + write_unlock(lock); + inet_twsk_deschedule(tw, twdr); + inet_twsk_put(tw); + + goto restart; + } + write_unlock(lock); + } + local_bh_enable(); +} +EXPORT_SYMBOL_GPL(inet_twsk_purge); diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 44c1e934824..1b4fee20fc9 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2376,6 +2376,7 @@ static int __net_init tcp_sk_init(struct net *net) static void __net_exit tcp_sk_exit(struct net *net) { inet_ctl_sock_destroy(net->ipv4.tcp_sock); + inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET); } static struct pernet_operations __net_initdata tcp_sk_ops = { diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 5b90b369ccb..b585c850a89 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -2148,6 +2148,7 @@ static int tcpv6_net_init(struct net *net) static void tcpv6_net_exit(struct net *net) { inet_ctl_sock_destroy(net->ipv6.tcp_sk); + inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6); } static struct pernet_operations tcpv6_net_ops = { From 8d4698f7a54a492a1b96c505b30fe750ae3e61d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 8 Sep 2008 13:44:40 -0700 Subject: [PATCH 561/638] bridge: don't allow setting hello time to zero Dushan Tcholich reports that on his system ksoftirqd can consume between %6 to %10 of cpu time, and cause ~200 context switches per second. He then correlated this with a report by bdupree@techfinesse.com: http://marc.info/?l=linux-kernel&m=119613299024398&w=2 and the culprit cause seems to be starting the bridge interface. In particular, when starting the bridge interface, his scripts are specifying a hello timer interval of "0". The bridge hello time can't be safely set to values less than 1 second, otherwise it is possible to end up with a runaway timer. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_ioctl.c | 8 +++++++- net/bridge/br_sysfs_br.c | 26 ++++++++++++++++++-------- 2 files changed, 25 insertions(+), 9 deletions(-) diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c index eeee218eed8..5bbf0736217 100644 --- a/net/bridge/br_ioctl.c +++ b/net/bridge/br_ioctl.c @@ -188,15 +188,21 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return 0; case BRCTL_SET_BRIDGE_HELLO_TIME: + { + unsigned long t = clock_t_to_jiffies(args[1]); if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (t < HZ) + return -EINVAL; + spin_lock_bh(&br->lock); - br->bridge_hello_time = clock_t_to_jiffies(args[1]); + br->bridge_hello_time = t; if (br_is_root_bridge(br)) br->hello_time = br->bridge_hello_time; spin_unlock_bh(&br->lock); return 0; + } case BRCTL_SET_BRIDGE_MAX_AGE: if (!capable(CAP_NET_ADMIN)) diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c index 27d6a511c8c..158dee8b496 100644 --- a/net/bridge/br_sysfs_br.c +++ b/net/bridge/br_sysfs_br.c @@ -29,11 +29,12 @@ */ static ssize_t store_bridge_parm(struct device *d, const char *buf, size_t len, - void (*set)(struct net_bridge *, unsigned long)) + int (*set)(struct net_bridge *, unsigned long)) { struct net_bridge *br = to_bridge(d); char *endp; unsigned long val; + int err; if (!capable(CAP_NET_ADMIN)) return -EPERM; @@ -43,9 +44,9 @@ static ssize_t store_bridge_parm(struct device *d, return -EINVAL; spin_lock_bh(&br->lock); - (*set)(br, val); + err = (*set)(br, val); spin_unlock_bh(&br->lock); - return len; + return err ? err : len; } @@ -56,12 +57,13 @@ static ssize_t show_forward_delay(struct device *d, return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay)); } -static void set_forward_delay(struct net_bridge *br, unsigned long val) +static int set_forward_delay(struct net_bridge *br, unsigned long val) { unsigned long delay = clock_t_to_jiffies(val); br->forward_delay = delay; if (br_is_root_bridge(br)) br->bridge_forward_delay = delay; + return 0; } static ssize_t store_forward_delay(struct device *d, @@ -80,12 +82,17 @@ static ssize_t show_hello_time(struct device *d, struct device_attribute *attr, jiffies_to_clock_t(to_bridge(d)->hello_time)); } -static void set_hello_time(struct net_bridge *br, unsigned long val) +static int set_hello_time(struct net_bridge *br, unsigned long val) { unsigned long t = clock_t_to_jiffies(val); + + if (t < HZ) + return -EINVAL; + br->hello_time = t; if (br_is_root_bridge(br)) br->bridge_hello_time = t; + return 0; } static ssize_t store_hello_time(struct device *d, @@ -104,12 +111,13 @@ static ssize_t show_max_age(struct device *d, struct device_attribute *attr, jiffies_to_clock_t(to_bridge(d)->max_age)); } -static void set_max_age(struct net_bridge *br, unsigned long val) +static int set_max_age(struct net_bridge *br, unsigned long val) { unsigned long t = clock_t_to_jiffies(val); br->max_age = t; if (br_is_root_bridge(br)) br->bridge_max_age = t; + return 0; } static ssize_t store_max_age(struct device *d, struct device_attribute *attr, @@ -126,9 +134,10 @@ static ssize_t show_ageing_time(struct device *d, return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time)); } -static void set_ageing_time(struct net_bridge *br, unsigned long val) +static int set_ageing_time(struct net_bridge *br, unsigned long val) { br->ageing_time = clock_t_to_jiffies(val); + return 0; } static ssize_t store_ageing_time(struct device *d, @@ -180,9 +189,10 @@ static ssize_t show_priority(struct device *d, struct device_attribute *attr, (br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]); } -static void set_priority(struct net_bridge *br, unsigned long val) +static int set_priority(struct net_bridge *br, unsigned long val) { br_stp_set_bridge_priority(br, (u16) val); + return 0; } static ssize_t store_priority(struct device *d, struct device_attribute *attr, From af904deaf6da3f3285eb0a06a3dc6a1af0251030 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 8 Sep 2008 11:58:13 -0400 Subject: [PATCH 562/638] NFS: Restore missing hunk in NFS mount option parser Automounter maps can contain mount options valid for other NFS implementations but not for Linux. The Linux automounter uses the mount command's "-s" command line option ("s" for "sloppy") so that mount requests containing such options are not rejected. Commit f45663ce5fb30f76a3414ab3ac69f4dd320e760a attempted to address a known regression with text-based NFS mount option parsing. Unrecognized mount options would cause mount requests to fail, even if the "-s" option was used on the mount command line. Unfortunately, this commit was not complete as submitted. It adds a new mount option, "sloppy". But it is missing a hunk, so it now allows NFS mounts with unrecognized mount options, even if the "sloppy" option is not present. This could be a problem if a required critical mount option such as "sync" is misspelled, for example, and is considered a regression from 2.6.26. This patch restores the missing hunk. Now, the default behavior of text-based NFS mount options is as before: any unrecognized mount option will cause the mount to fail. Please include this in 2.6.27-rc. Thanks to Neil Brown for reporting this. Signed-off-by: Chuck Lever Acked-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- fs/nfs/super.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 9abcd2b329f..e9b20173fef 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1279,6 +1279,12 @@ static int nfs_parse_mount_options(char *raw, } } + if (errors > 0) { + dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n", + errors, (errors == 1 ? "" : "s")); + if (!sloppy) + return 0; + } return 1; out_nomem: From 06dd881f59b3c07a430cdcbef2197f9b6dc79ae8 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Mon, 8 Sep 2008 14:53:37 +0100 Subject: [PATCH 563/638] usb: fix null deferences in low level usb serial The hw interface drivers for the usb serial devices deference the tty structure to set up the parameters for the initial console. The tty structure should be passed as a parameter to the set_termios() call. Signed-off-by: Jason Wessel Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/usb/serial/console.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 7b74238ad1c..e980766bb84 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { termios->c_cflag = cflag; tty_termios_encode_baud_rate(termios, baud, baud); - serial->type->set_termios(NULL, port, &dummy); + serial->type->set_termios(tty, port, &dummy); port->port.tty = NULL; kfree(termios); From a46add72f79bb8196f07a860adddd312ca398eec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 9 Sep 2008 00:11:39 +0200 Subject: [PATCH 564/638] Fix format of MAINTAINERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ... one entry lacked a colon which broke one of my scripts. Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index af279458b61..b3e92fbe336 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1593,7 +1593,7 @@ S: Supported EMBEDDED LINUX P: Paul Gortmaker M: paul.gortmaker@windriver.com -P David Woodhouse +P: David Woodhouse M: dwmw2@infradead.org L: linux-embedded@vger.kernel.org S: Maintained From 2eb2f77900d62796934bcd43c4089e444cf1179e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 8 Sep 2008 17:21:07 -0700 Subject: [PATCH 565/638] sparc64: Disable timer interrupts in fixup_irqs(). When a CPU is offlined, we leave the timer interrupts disabled because fixup_irqs() does not explicitly take care of that case. Fix this by invoking tick_ops->disable_irq(). Based upon analysis done by Paul E. McKenney. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 9b6689d9d57..23963882bc1 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -792,6 +792,8 @@ void fixup_irqs(void) } spin_unlock_irqrestore(&irq_desc[irq].lock, flags); } + + tick_ops->disable_irq(); } #endif From f1c08ca559387ab30992055596d54061dfa022b1 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 9 Sep 2008 07:19:19 +0200 Subject: [PATCH 566/638] [Bluetooth] Fix reference counting during ACL config stage The ACL config stage keeps holding a reference count on incoming connections when requesting the extended features. This results in keeping an ACL link up without any users. The problem here is that the Bluetooth specification doesn't define an ownership of the ACL link and thus it can happen that the implementation on the initiator side doesn't care about disconnecting unused links. In this case the acceptor needs to take care of this. Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_event.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 0e3db289f4b..ad7a553d771 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1605,14 +1605,11 @@ static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_b if (conn->state == BT_CONFIG) { if (!ev->status && hdev->ssp_mode > 0 && - conn->ssp_mode > 0) { - if (conn->out) { - struct hci_cp_auth_requested cp; - cp.handle = ev->handle; - hci_send_cmd(hdev, - HCI_OP_AUTH_REQUESTED, + conn->ssp_mode > 0 && conn->out) { + struct hci_cp_auth_requested cp; + cp.handle = ev->handle; + hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp); - } } else { conn->state = BT_CONNECTED; hci_proto_connect_cfm(conn, ev->status); From 09ab6f4c2376a0fc31abde1e2991513f900ea825 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 9 Sep 2008 07:19:20 +0200 Subject: [PATCH 567/638] [Bluetooth] Enforce correct authentication requirements With the introduction of Security Mode 4 and Simple Pairing from the Bluetooth 2.1 specification it became mandatory that the initiator requires authentication and encryption before any L2CAP channel can be established. The only exception here is PSM 1 for the service discovery protocol (SDP). It is meant to be used without any encryption since it contains only public information. This is how Bluetooth 2.0 and before handle connections on PSM 1. For Bluetooth 2.1 devices the pairing procedure differentiates between no bonding, general bonding and dedicated bonding. The L2CAP layer wrongly uses always general bonding when creating new connections, but it should not do this for SDP connections. In this case the authentication requirement should be no bonding and the just-works model should be used, but in case of non-SDP connection it is required to use general bonding. If the new connection requires man-in-the-middle (MITM) protection, it also first wrongly creates an unauthenticated link key and then later on requests an upgrade to an authenticated link key to provide full MITM protection. With Simple Pairing the link key generation is an expensive operation (compared to Bluetooth 2.0 and before) and doing this twice during a connection setup causes a noticeable delay when establishing a new connection. This should be avoided to not regress from the expected Bluetooth 2.0 connection times. The authentication requirements are known up-front and so enforce them. To fulfill these requirements the hci_connect() function has been extended with an authentication requirement parameter that will be stored inside the connection information and can be retrieved by userspace at any time. This allows the correct IO capabilities exchange and results in the expected behavior. Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 2 +- net/bluetooth/hci_conn.c | 8 +++++--- net/bluetooth/l2cap.c | 19 +++++++++++++++++-- net/bluetooth/sco.c | 2 +- 4 files changed, 24 insertions(+), 7 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index cbf75109468..5e785b968e7 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -325,7 +325,7 @@ int hci_conn_del(struct hci_conn *conn); void hci_conn_hash_flush(struct hci_dev *hdev); void hci_conn_check_pending(struct hci_dev *hdev); -struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *src); +struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type); int hci_conn_auth(struct hci_conn *conn); int hci_conn_encrypt(struct hci_conn *conn); int hci_conn_change_link_key(struct hci_conn *conn); diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ca8d05245ca..a2f9efaa336 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -330,7 +330,7 @@ EXPORT_SYMBOL(hci_get_route); /* Create SCO or ACL connection. * Device _must_ be locked */ -struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst) +struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type) { struct hci_conn *acl; struct hci_conn *sco; @@ -344,8 +344,10 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst) hci_conn_hold(acl); - if (acl->state == BT_OPEN || acl->state == BT_CLOSED) + if (acl->state == BT_OPEN || acl->state == BT_CLOSED) { + acl->auth_type = auth_type; hci_acl_connect(acl); + } if (type == ACL_LINK) return acl; @@ -381,7 +383,7 @@ int hci_conn_auth(struct hci_conn *conn) if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0) { if (!(conn->auth_type & 0x01)) { - conn->auth_type = HCI_AT_GENERAL_BONDING_MITM; + conn->auth_type |= 0x01; conn->link_mode &= ~HCI_LM_AUTH; } } diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 3396d5bdef1..a96d6de80d1 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -55,7 +55,7 @@ #define BT_DBG(D...) #endif -#define VERSION "2.10" +#define VERSION "2.11" static u32 l2cap_feat_mask = 0x0000; @@ -778,6 +778,7 @@ static int l2cap_do_connect(struct sock *sk) struct l2cap_conn *conn; struct hci_conn *hcon; struct hci_dev *hdev; + __u8 auth_type; int err = 0; BT_DBG("%s -> %s psm 0x%2.2x", batostr(src), batostr(dst), l2cap_pi(sk)->psm); @@ -789,7 +790,21 @@ static int l2cap_do_connect(struct sock *sk) err = -ENOMEM; - hcon = hci_connect(hdev, ACL_LINK, dst); + if (l2cap_pi(sk)->link_mode & L2CAP_LM_AUTH || + l2cap_pi(sk)->link_mode & L2CAP_LM_ENCRYPT || + l2cap_pi(sk)->link_mode & L2CAP_LM_SECURE) { + if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) + auth_type = HCI_AT_NO_BONDING_MITM; + else + auth_type = HCI_AT_GENERAL_BONDING_MITM; + } else { + if (l2cap_pi(sk)->psm == cpu_to_le16(0x0001)) + auth_type = HCI_AT_NO_BONDING; + else + auth_type = HCI_AT_GENERAL_BONDING; + } + + hcon = hci_connect(hdev, ACL_LINK, dst, auth_type); if (!hcon) goto done; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index a16011fedc1..0cc91e6da76 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -200,7 +200,7 @@ static int sco_connect(struct sock *sk) else type = SCO_LINK; - hcon = hci_connect(hdev, type, dst); + hcon = hci_connect(hdev, type, dst, HCI_AT_NO_BONDING); if (!hcon) goto done; From e7c29cb16c833441fd2160642bb13025f4e7ac70 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 9 Sep 2008 07:19:20 +0200 Subject: [PATCH 568/638] [Bluetooth] Reject L2CAP connections on an insecure ACL link The Security Mode 4 of the Bluetooth 2.1 specification has strict authentication and encryption requirements. It is the initiators job to create a secure ACL link. However in case of malicious devices, the acceptor has to make sure that the ACL is encrypted before allowing any kind of L2CAP connection. The only exception here is the PSM 1 for the service discovery protocol, because that is allowed to run on an insecure ACL link. Previously it was enough to reject a L2CAP connection during the connection setup phase, but with Bluetooth 2.1 it is forbidden to do any L2CAP protocol exchange on an insecure link (except SDP). The new hci_conn_check_link_mode() function can be used to check the integrity of an ACL link. This functions also takes care of the cases where Security Mode 4 is disabled or one of the devices is based on an older specification. Signed-off-by: Marcel Holtmann --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/af_bluetooth.c | 2 +- net/bluetooth/hci_conn.c | 13 +++++++++++++ net/bluetooth/l2cap.c | 15 +++++++++++---- 4 files changed, 26 insertions(+), 5 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 5e785b968e7..46a43b721dd 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -326,6 +326,7 @@ void hci_conn_hash_flush(struct hci_dev *hdev); void hci_conn_check_pending(struct hci_dev *hdev); struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 auth_type); +int hci_conn_check_link_mode(struct hci_conn *conn); int hci_conn_auth(struct hci_conn *conn); int hci_conn_encrypt(struct hci_conn *conn); int hci_conn_change_link_key(struct hci_conn *conn); diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 1edfdf4c095..f6348e078aa 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -49,7 +49,7 @@ #define BT_DBG(D...) #endif -#define VERSION "2.12" +#define VERSION "2.13" /* Bluetooth sockets */ #define BT_MAX_PROTO 8 diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index a2f9efaa336..b7002429f15 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -376,6 +376,19 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 } EXPORT_SYMBOL(hci_connect); +/* Check link security requirement */ +int hci_conn_check_link_mode(struct hci_conn *conn) +{ + BT_DBG("conn %p", conn); + + if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0 && + !(conn->link_mode & HCI_LM_ENCRYPT)) + return 0; + + return 1; +} +EXPORT_SYMBOL(hci_conn_check_link_mode); + /* Authenticate remote device */ int hci_conn_auth(struct hci_conn *conn) { diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index a96d6de80d1..9610a9c85b9 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1568,10 +1568,10 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd struct l2cap_conn_req *req = (struct l2cap_conn_req *) data; struct l2cap_conn_rsp rsp; struct sock *sk, *parent; - int result, status = 0; + int result, status = L2CAP_CS_NO_INFO; u16 dcid = 0, scid = __le16_to_cpu(req->scid); - __le16 psm = req->psm; + __le16 psm = req->psm; BT_DBG("psm 0x%2.2x scid 0x%4.4x", psm, scid); @@ -1582,6 +1582,13 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd goto sendresp; } + /* Check if the ACL is secure enough (if not SDP) */ + if (psm != cpu_to_le16(0x0001) && + !hci_conn_check_link_mode(conn->hcon)) { + result = L2CAP_CR_SEC_BLOCK; + goto response; + } + result = L2CAP_CR_NO_MEM; /* Check for backlog size */ @@ -2239,7 +2246,7 @@ static int l2cap_auth_cfm(struct hci_conn *hcon, u8 status) rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid); rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid); rsp.result = cpu_to_le16(result); - rsp.status = cpu_to_le16(0); + rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO); l2cap_send_cmd(conn, l2cap_pi(sk)->ident, L2CAP_CONN_RSP, sizeof(rsp), &rsp); } @@ -2311,7 +2318,7 @@ static int l2cap_encrypt_cfm(struct hci_conn *hcon, u8 status, u8 encrypt) rsp.scid = cpu_to_le16(l2cap_pi(sk)->dcid); rsp.dcid = cpu_to_le16(l2cap_pi(sk)->scid); rsp.result = cpu_to_le16(result); - rsp.status = cpu_to_le16(0); + rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO); l2cap_send_cmd(conn, l2cap_pi(sk)->ident, L2CAP_CONN_RSP, sizeof(rsp), &rsp); } From 3d6e48f43340343d97839eadb1ab7b6a3ea98797 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 9 Sep 2008 12:38:56 +0200 Subject: [PATCH 569/638] [S390] CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode When running a 31-bit ptrace, on either an s390 or s390x kernel, reads and writes into a padding area in struct user_regs_struct32 will result in a kernel panic. This is also known as CVE-2008-1514. Test case available here: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/user-area-padding.c?cvsroot=systemtap Steps to reproduce: 1) wget the above 2) gcc -o user-area-padding-31bit user-area-padding.c -Wall -ggdb2 -D_GNU_SOURCE -m31 3) ./user-area-padding-31bit Test status ----------- Without patch, both s390 and s390x kernels panic. With patch, the test case, as well as the gdb testsuite, pass without incident, padding area reads returning zero, writes ignored. Nb: original version returned -EINVAL on write attempts, which broke the gdb test and made the test case slightly unhappy, Jan Kratochvil suggested the change to return 0 on write attempts. Signed-off-by: Jarod Wilson Tested-by: Jan Kratochvil Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_ptrace.h | 1 + arch/s390/kernel/ptrace.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h index cde81fa64f8..a2be3a978d5 100644 --- a/arch/s390/kernel/compat_ptrace.h +++ b/arch/s390/kernel/compat_ptrace.h @@ -42,6 +42,7 @@ struct user_regs_struct32 u32 gprs[NUM_GPRS]; u32 acrs[NUM_ACRS]; u32 orig_gpr2; + /* nb: there's a 4-byte hole here */ s390_fp_regs fp_regs; /* * These per registers are in here so that gdb can modify them diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 2815bfe348a..c8b08289eb8 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr) */ tmp = (addr_t) task_pt_regs(child)->orig_gpr2; + } else if (addr < (addr_t) &dummy->regs.fp_regs) { + /* + * prevent reads of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + tmp = 0; + } else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data) */ task_pt_regs(child)->orig_gpr2 = data; + } else if (addr < (addr_t) &dummy->regs.fp_regs) { + /* + * prevent writes of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + return 0; + } else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr) */ tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4); + } else if (addr < (addr_t) &dummy32->regs.fp_regs) { + /* + * prevent reads of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + tmp = 0; + } else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure @@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child, */ *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp; + } else if (addr < (addr_t) &dummy32->regs.fp_regs) { + /* + * prevent writess of padding hole between + * orig_gpr2 and fp_regs on s390. + */ + return 0; + } else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) { /* * floating point regs. are stored in the thread structure From a2164b8174f13b7315c3f45c0b48dec619285096 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 9 Sep 2008 12:38:57 +0200 Subject: [PATCH 570/638] [S390] cio: Correct cleanup on error. Fix cleanup on error in chp_new() and init_channel_subsystem() (must not call kfree() on structures that had been registered). Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chp.c | 7 ++++--- drivers/s390/cio/css.c | 32 ++++++++++++++++++-------------- 2 files changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index db00b059173..f1216cf6fa8 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid) ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group); if (ret) { device_unregister(&chp->dev); - goto out_free; + goto out; } mutex_lock(&channel_subsystems[chpid.cssid]->mutex); if (channel_subsystems[chpid.cssid]->cm_enabled) { @@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid) sysfs_remove_group(&chp->dev.kobj, &chp_attr_group); device_unregister(&chp->dev); mutex_unlock(&channel_subsystems[chpid.cssid]->mutex); - goto out_free; + goto out; } } channel_subsystems[chpid.cssid]->chps[chpid.id] = chp; mutex_unlock(&channel_subsystems[chpid.cssid]->mutex); - return ret; + goto out; out_free: kfree(chp); +out: return ret; } diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 51489eff6b0..1261e1a9e8c 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -633,6 +633,11 @@ channel_subsystem_release(struct device *dev) css = to_css(dev); mutex_destroy(&css->mutex); + if (css->pseudo_subchannel) { + /* Implies that it has been generated but never registered. */ + css_subchannel_release(&css->pseudo_subchannel->dev); + css->pseudo_subchannel = NULL; + } kfree(css); } @@ -785,11 +790,15 @@ init_channel_subsystem (void) } channel_subsystems[i] = css; ret = setup_css(i); - if (ret) - goto out_free; + if (ret) { + kfree(channel_subsystems[i]); + goto out_unregister; + } ret = device_register(&css->device); - if (ret) - goto out_free_all; + if (ret) { + put_device(&css->device); + goto out_unregister; + } if (css_chsc_characteristics.secm) { ret = device_create_file(&css->device, &dev_attr_cm_enable); @@ -802,7 +811,7 @@ init_channel_subsystem (void) } ret = register_reboot_notifier(&css_reboot_notifier); if (ret) - goto out_pseudo; + goto out_unregister; css_init_done = 1; /* Enable default isc for I/O subchannels. */ @@ -810,18 +819,12 @@ init_channel_subsystem (void) for_each_subchannel(__init_channel_subsystem, NULL); return 0; -out_pseudo: - device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev); out_file: - device_remove_file(&channel_subsystems[i]->device, - &dev_attr_cm_enable); + if (css_chsc_characteristics.secm) + device_remove_file(&channel_subsystems[i]->device, + &dev_attr_cm_enable); out_device: device_unregister(&channel_subsystems[i]->device); -out_free_all: - kfree(channel_subsystems[i]->pseudo_subchannel->lock); - kfree(channel_subsystems[i]->pseudo_subchannel); -out_free: - kfree(channel_subsystems[i]); out_unregister: while (i > 0) { struct channel_subsystem *css; @@ -829,6 +832,7 @@ out_unregister: i--; css = channel_subsystems[i]; device_unregister(&css->pseudo_subchannel->dev); + css->pseudo_subchannel = NULL; if (css_chsc_characteristics.secm) device_remove_file(&css->device, &dev_attr_cm_enable); From c91ebe496120e05301465fff31094bfecf798e9f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 9 Sep 2008 12:38:58 +0200 Subject: [PATCH 571/638] [S390] cio: handle ssch() return codes correctly. ssch() has two classes of return codes: - condition codes (0-3) which need to be translated to Linux error codes - Linux error codes (-EIO on exceptions) which should be passed to the caller (instead of erronously being handled like condition code 3) Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 33bff8fec7d..5954b905e3c 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -208,8 +208,10 @@ cio_start_key (struct subchannel *sch, /* subchannel structure */ case 1: /* status pending */ case 2: /* busy */ return -EBUSY; - default: /* device/path not operational */ + case 3: /* device/path not operational */ return cio_start_handle_notoper(sch, lpm); + default: + return ccode; } } From b301ea8c81b13123761772f344faf606c76ba174 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Tue, 9 Sep 2008 12:38:59 +0200 Subject: [PATCH 572/638] [S390] cio: allow offline processing for disconnected devices When disconnected ccw devices are removed, the device has to be set offline, otherwise there will be side effects including a reference count imbalance. This patch modifies ccw_device_offline to work for devices in disconnecte/not operational state. ccw_device_offline is called by cio for devices which are online during device removal. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_fsm.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 550508df952..84cc9ea346d 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -658,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev) { struct subchannel *sch; + /* Allow ccw_device_offline while disconnected. */ + if (cdev->private->state == DEV_STATE_DISCONNECTED || + cdev->private->state == DEV_STATE_NOT_OPER) { + cdev->private->flags.donotify = 0; + ccw_device_done(cdev, DEV_STATE_NOT_OPER); + return 0; + } if (ccw_device_is_orphan(cdev)) { ccw_device_done(cdev, DEV_STATE_OFFLINE); return 0; From 225f40055f779032974a9fce7b2f9c9eda04ff58 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 9 Sep 2008 05:23:37 -0700 Subject: [PATCH 573/638] ipsec: Restore larval states and socket policies in dump The commit commit 4c563f7669c10a12354b72b518c2287ffc6ebfb3 ("[XFRM]: Speed up xfrm_policy and xfrm_state walking") inadvertently removed larval states and socket policies from netlink dumps. This patch restores them. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 1 + net/xfrm/xfrm_state.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 46914b79d85..b7754b1b73a 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1077,6 +1077,7 @@ static void __xfrm_policy_link(struct xfrm_policy *pol, int dir) struct hlist_head *chain = policy_hash_bysel(&pol->selector, pol->family, dir); + list_add_tail(&pol->bytype, &xfrm_policy_bytype[pol->type]); hlist_add_head(&pol->bydst, chain); hlist_add_head(&pol->byidx, xfrm_policy_byidx+idx_hash(pol->index)); xfrm_policy_count[dir]++; diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 7bd62f61593..0a8f09c3144 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -858,6 +858,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr, if (km_query(x, tmpl, pol) == 0) { x->km.state = XFRM_STATE_ACQ; + list_add_tail(&x->all, &xfrm_state_all); hlist_add_head(&x->bydst, xfrm_state_bydst+h); h = xfrm_src_hash(daddr, saddr, family); hlist_add_head(&x->bysrc, xfrm_state_bysrc+h); @@ -1055,6 +1056,7 @@ static struct xfrm_state *__find_acq_core(unsigned short family, u8 mode, u32 re xfrm_state_hold(x); x->timer.expires = jiffies + sysctl_xfrm_acq_expires*HZ; add_timer(&x->timer); + list_add_tail(&x->all, &xfrm_state_all); hlist_add_head(&x->bydst, xfrm_state_bydst+h); h = xfrm_src_hash(daddr, saddr, family); hlist_add_head(&x->bysrc, xfrm_state_bysrc+h); From cbda1ba898647aeb4ee770b803c922f595e97731 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 7 Sep 2008 16:35:26 +0100 Subject: [PATCH 574/638] PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets Some BIOSes (the Intel DG33BU, for example) wrongly claim to have DMAR when they don't. Avoid the resulting crashes when it doesn't work as expected. Signed-off-by: David Woodhouse Acked-by: Ingo Molnar Signed-off-by: Jesse Barnes --- drivers/pci/intel-iommu.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8d0e60ac849..c3edcdc08e7 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2348,11 +2348,34 @@ static void __init iommu_exit_mempool(void) } +static int blacklist_iommu(const struct dmi_system_id *id) +{ + printk(KERN_INFO "%s detected; disabling IOMMU\n", + id->ident); + dmar_disabled = 1; + return 0; +} + +static struct dmi_system_id __initdata intel_iommu_dmi_table[] = { + { /* Some DG33BU BIOS revisions advertised non-existent VT-d */ + .callback = blacklist_iommu, + .ident = "Intel DG33BU", + { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "DG33BU"), + } + }, + { } +}; + + void __init detect_intel_iommu(void) { if (swiotlb || no_iommu || iommu_detected || dmar_disabled) return; if (early_dmar_detect()) { + dmi_check_system(intel_iommu_dmi_table); + if (dmar_disabled) + return; iommu_detected = 1; } } From 4ca8a7726fb0e8094fdb56f2ae2d69fcf9254eae Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Fri, 22 Aug 2008 20:46:59 +0200 Subject: [PATCH 575/638] PCI: Fix printk warnings in probe.c The cleaned up resource code in probe.c introduced some warnings: drivers/pci/probe.c: In function 'pci_read_bridge_bases': drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/pci/probe.c:386: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/pci/probe.c:398: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/pci/probe.c:434: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' So fix them up. Signed-off-by: Johann Felix Soden Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index cce2f4cb1fb..0ad936765b2 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -383,7 +383,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; if (!res->end) res->end = limit + 0xfff; - printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end); + printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", + pci_name(dev), (unsigned long long) res->start, + (unsigned long long) res->end); } res = child->resource[1]; @@ -395,7 +397,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end); + printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), + (unsigned long long) res->start, (unsigned long long) res->end); } res = child->resource[2]; @@ -431,7 +434,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end); + printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", + pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32", + (unsigned long long) res->start, (unsigned long long) res->end); } } From 53bc88701be91e7f631ad31418b32392aa952e9b Mon Sep 17 00:00:00 2001 From: Johann Felix Soden Date: Fri, 22 Aug 2008 20:25:10 +0200 Subject: [PATCH 576/638] PCI: Fix printk warnings in setup-bus.c Again, the cleaned up code introduced some resource warnings: drivers/pci/setup-bus.c: In function 'pci_bus_dump_res': drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' drivers/pci/setup-bus.c:542: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'resource_size_t' Fix those up too. Signed-off-by: Johann Felix Soden Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 82634a2f1b1..c6ea4e97e8b 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -539,7 +539,11 @@ static void pci_bus_dump_res(struct pci_bus *bus) if (!res) continue; - printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end); + printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", + bus->number, i, + (res->flags & IORESOURCE_IO) ? "io port" : "mmio", + (unsigned long long) res->start, + (unsigned long long) res->end); } } From 48902025af4da44dbbc0231061e542d6d40e712e Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 5 Sep 2008 14:05:03 -0700 Subject: [PATCH 577/638] PCI Hotplug: fakephp: fix deadlock... again Commit fe99740cac117f208707488c03f3789cf4904957 (construct one fakephp slot per PCI slot) introduced a regression, causing a deadlock when removing a PCI device. We also never actually removed the device from the PCI core. So we: - remove the device from the PCI core - do not directly call remove_slot() to prevent deadlock Yu Zhao reported and diagnosed this defect. Signed-off-by: Alex Chiang Acked-by: Yu Zhao Cc: Matthew Wilcox Cc: Kristen Carlson Accardi Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/fakephp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 40337a06c18..146ca9cd156 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -320,15 +320,15 @@ static int disable_slot(struct hotplug_slot *slot) return -ENODEV; } + /* remove the device from the pci core */ + pci_remove_bus_device(dev); + /* queue work item to blow away this sysfs entry and other * parts. */ INIT_WORK(&dslot->remove_work, remove_slot_worker); queue_work(dummyphp_wq, &dslot->remove_work); - /* blow away this sysfs entry and other parts. */ - remove_slot(dslot); - pci_dev_put(dev); } return 0; From adaae7215e5130e5ce1ac3ee390e5a23101b09b2 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 9 Sep 2008 20:02:01 +0200 Subject: [PATCH 578/638] update Documentation/filesystems/Locking for 2.6.27 changes In the 2.6.27 circle ->fasync lost the BKL, and the last remaining ->open variant that takes the BKL is also gone. ->get_sb and ->kill_sb didn't have BKL forever, so updated the entries while we're at that. Signed-off-by: Christoph Hellwig Signed-off-by: Linus Torvalds --- Documentation/filesystems/Locking | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 680fb566b92..8362860e21a 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -144,8 +144,8 @@ prototypes: void (*kill_sb) (struct super_block *); locking rules: may block BKL -get_sb yes yes -kill_sb yes yes +get_sb yes no +kill_sb yes no ->get_sb() returns error or 0 with locked superblock attached to the vfsmount (exclusive on ->s_umount). @@ -409,12 +409,12 @@ ioctl: yes (see below) unlocked_ioctl: no (see below) compat_ioctl: no mmap: no -open: maybe (see below) +open: no flush: no release: no fsync: no (see below) aio_fsync: no -fasync: yes (see below) +fasync: no lock: yes readv: no writev: no @@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode semaphore. Note some filesystems (i.e. remote ones) provide no protection for i_size so you will need to use the BKL. -->open() locking is in-transit: big lock partially moved into the methods. -The only exception is ->open() in the instances of file_operations that never -end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices -(chrdev_open() takes lock before replacing ->f_op and calling the secondary -method. As soon as we fix the handling of module reference counters all -instances of ->open() will be called without the BKL. - Note: ext2_release() was *the* source of contention on fs-intensive loads and dropping BKL on ->release() helps to get rid of that (we still grab BKL for cases when we close a file that had been opened r/w, but that From 7ae115b4f50d3c5824f1a15e572b5de9d1b06d35 Mon Sep 17 00:00:00 2001 From: Chris Snook Date: Tue, 9 Sep 2008 03:26:57 -0400 Subject: [PATCH 579/638] MAINTAINERS: add Atheros maintainer for atlx Jie Yang at Atheros is getting more directly involved with upstream work on the atl* drivers. This patch changes the ATL1 entry to ATLX (atl2 support posted to netdev today) and adds him as a maintainer. Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b3e92fbe336..186be3ba506 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -750,11 +750,13 @@ P: Ville Syrjala M: syrjala@sci.fi S: Maintained -ATL1 ETHERNET DRIVER +ATLX ETHERNET DRIVERS P: Jay Cliburn M: jcliburn@gmail.com P: Chris Snook M: csnook@redhat.com +P: Jie Yang +M: jie.yang@atheros.com L: atl1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net From deac93df26b20cf8438339b5935b5f5643bc30c9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 3 Sep 2008 20:43:36 -0500 Subject: [PATCH 580/638] lib: Correct printk %pF to work on all architectures It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer formats" in commit 0fe1ef24f7bd0020f29ffe287dfdb9ead33ca0b2. However, the current way its coded doesn't work on parisc64. For two reasons: 1) parisc isn't in the #ifdef and 2) parisc has a different format for function descriptors Make dereference_function_descriptor() more accommodating by allowing architecture overrides. I put the three overrides (for parisc64, ppc64 and ia64) in arch/kernel/module.c because that's where the kernel internal linker which knows how to deal with function descriptors sits. Signed-off-by: James Bottomley Acked-by: Benjamin Herrenschmidt Acked-by: Tony Luck Acked-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/ia64/include/asm/sections.h | 3 +++ arch/ia64/kernel/module.c | 12 ++++++++++++ arch/parisc/kernel/module.c | 14 ++++++++++++++ arch/powerpc/include/asm/sections.h | 3 +++ arch/powerpc/kernel/module_64.c | 13 ++++++++++++- include/asm-generic/sections.h | 6 ++++++ include/asm-parisc/sections.h | 5 +++++ lib/vsprintf.c | 11 +---------- 8 files changed, 56 insertions(+), 11 deletions(-) diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h index 7286e4a9fe8..a7acad2bc2f 100644 --- a/arch/ia64/include/asm/sections.h +++ b/arch/ia64/include/asm/sections.h @@ -21,5 +21,8 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b extern char __start_unwind[], __end_unwind[]; extern char __start_ivt_text[], __end_ivt_text[]; +#undef dereference_function_descriptor +void *dereference_function_descriptor(void *); + #endif /* _ASM_IA64_SECTIONS_H */ diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 29aad349e0c..545626f66a4 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -31,9 +31,11 @@ #include #include #include +#include #include #include +#include #include #define ARCH_MODULE_DEBUG 0 @@ -941,3 +943,13 @@ module_arch_cleanup (struct module *mod) if (mod->arch.core_unw_table) unw_remove_unwind_table(mod->arch.core_unw_table); } + +void *dereference_function_descriptor(void *ptr) +{ + struct fdesc *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->ip, p)) + ptr = p; + return ptr; +} diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index fdacdd4341c..44138c3e6ea 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -47,7 +47,9 @@ #include #include #include +#include +#include #include #if 0 @@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod) deregister_unwind_table(mod); module_bug_cleanup(mod); } + +#ifdef CONFIG_64BIT +void *dereference_function_descriptor(void *ptr) +{ + Elf64_Fdesc *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->addr, p)) + ptr = p; + return ptr; +} +#endif diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 916018e425c..7710e9e6660 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -16,6 +16,9 @@ static inline int in_kernel_text(unsigned long addr) return 0; } +#undef dereference_function_descriptor +void *dereference_function_descriptor(void *); + #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index ee6a2982d56..ad79de272ff 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -21,8 +21,9 @@ #include #include #include +#include #include -#include +#include #include #include #include @@ -451,3 +452,13 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return 0; } + +void *dereference_function_descriptor(void *ptr) +{ + struct ppc64_opd_entry *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->funcaddr, p)) + ptr = p; + return ptr; +} diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 8feeae1f236..79a7ff925bf 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -14,4 +14,10 @@ extern char __kprobes_text_start[], __kprobes_text_end[]; extern char __initdata_begin[], __initdata_end[]; extern char __start_rodata[], __end_rodata[]; +/* function descriptor handling (if any). Override + * in asm/sections.h */ +#ifndef dereference_function_descriptor +#define dereference_function_descriptor(p) (p) +#endif + #endif /* _ASM_GENERIC_SECTIONS_H_ */ diff --git a/include/asm-parisc/sections.h b/include/asm-parisc/sections.h index fdd43ec42ec..9d13c3507ad 100644 --- a/include/asm-parisc/sections.h +++ b/include/asm-parisc/sections.h @@ -4,4 +4,9 @@ /* nothing to see, move along */ #include +#ifdef CONFIG_64BIT +#undef dereference_function_descriptor +void *dereference_function_descriptor(void *); +#endif + #endif diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d8d1d114224..c399bc1093c 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -27,6 +27,7 @@ #include /* for PAGE_SIZE */ #include +#include /* for dereference_function_descriptor() */ /* Works only for digits and letters, but small and fast */ #define TOLOWER(x) ((x) | 0x20) @@ -513,16 +514,6 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio return buf; } -static inline void *dereference_function_descriptor(void *ptr) -{ -#if defined(CONFIG_IA64) || defined(CONFIG_PPC64) - void *p; - if (!probe_kernel_address(ptr, p)) - ptr = p; -#endif - return ptr; -} - static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags) { unsigned long value = (unsigned long) ptr; From d6be118a97ce51ca84035270f91c2bccecbfac5f Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 9 Sep 2008 09:56:08 -0400 Subject: [PATCH 581/638] x86: fix memmap=exactmap boot argument When using kdump modifying the e820 map is yielding strange results. For example starting with BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 0000000000093400 (usable) BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data) BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) and booting with args memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K resulted in: user-defined physical RAM map: user: 0000000000000000 - 0000000000093400 (usable) user: 0000000000093400 - 00000000000a0000 (reserved) user: 0000000000100000 - 000000003fee0000 (usable) user: 000000003fee0000 - 000000003fef3000 (ACPI data) user: 000000003fef3000 - 000000003ff80000 (ACPI NVS) user: 000000003ff80000 - 0000000040000000 (reserved) user: 00000000e0000000 - 00000000f0000000 (reserved) user: 00000000fec00000 - 00000000fec10000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ff000000 - 0000000100000000 (reserved) But should have resulted in: user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000001000000 - 000000000151b000 (usable) user: 00000000015bb000 - 0000000008ffc000 (usable) user: 000000003fee0000 - 000000003ff80000 (ACPI data) This is happening because of an improper usage of strcmp() in the e820 parsing code. The strcmp() always returns !0 and never resets the value for e820.nr_map and returns an incorrect user-defined map. This patch fixes the problem. Signed-off-by: Prarit Bhargava Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 9af89078f7b..66e48aa2dd1 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p) if (!p) return -EINVAL; - if (!strcmp(p, "exactmap")) { + if (!strncmp(p, "exactmap", 8)) { #ifdef CONFIG_CRASH_DUMP /* * If we are doing a crash dump, we still need to know From 61c22c34c6f80a8e89cff5ff717627c54cc14fd4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 9 Sep 2008 21:38:57 +0200 Subject: [PATCH 582/638] clockevents: remove WARN_ON which was used to gather information The issue of the endless reprogramming loop due to a too small min_delta_ns was fixed with the previous updates of the clock events code, but we had no information about the spread of this problem. I added a WARN_ON to get automated information via kerneloops.org and to get some direct reports, which allowed me to analyse the affected machines. The WARN_ON has served its purpose and would be annoying for a release kernel. Remove it and just keep the information about the increase of the min_delta_ns value. Signed-off-by: Thomas Gleixner --- kernel/time/tick-oneshot.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index 2e35501e61d..2e8de678e76 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -43,19 +43,17 @@ int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires, * and emit a warning. */ if (++i > 2) { - printk(KERN_WARNING "CE: __tick_program_event of %s is " - "stuck %llx %llx\n", dev->name ? dev->name : "?", - now.tv64, expires.tv64); - printk(KERN_WARNING - "CE: increasing min_delta_ns %ld to %ld nsec\n", - dev->min_delta_ns, dev->min_delta_ns << 1); - WARN_ON(1); - - /* Double the min. delta and try again */ + /* Increase the min. delta and try again */ if (!dev->min_delta_ns) dev->min_delta_ns = 5000; else - dev->min_delta_ns <<= 1; + dev->min_delta_ns += dev->min_delta_ns >> 1; + + printk(KERN_WARNING + "CE: %s increasing min_delta_ns to %lu nsec\n", + dev->name ? dev->name : "?", + dev->min_delta_ns << 1); + i = 0; } From e550dfb0c2c31b6363aa463a035fc9f8dcaa3c9b Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 9 Sep 2008 13:51:35 -0700 Subject: [PATCH 583/638] ipv6: Fix OOPS in ip6_dst_lookup_tail(). This fixes kernel bugzilla 11469: "TUN with 1024 neighbours: ip6_dst_lookup_tail NULL crash" dst->neighbour is not necessarily hooked up at this point in the processing path, so blindly dereferencing it is the wrong thing to do. This NULL check exists in other similar paths and this case was just an oversight. Also fix the completely wrong and confusing indentation here while we're at it. Based upon a patch by Evgeniy Polyakov. Signed-off-by: Neil Horman Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 58 +++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 0e844c2736a..3df2c442d90 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -943,39 +943,39 @@ static int ip6_dst_lookup_tail(struct sock *sk, } #ifdef CONFIG_IPV6_OPTIMISTIC_DAD - /* - * Here if the dst entry we've looked up - * has a neighbour entry that is in the INCOMPLETE - * state and the src address from the flow is - * marked as OPTIMISTIC, we release the found - * dst entry and replace it instead with the - * dst entry of the nexthop router - */ - if (!((*dst)->neighbour->nud_state & NUD_VALID)) { - struct inet6_ifaddr *ifp; - struct flowi fl_gw; - int redirect; + /* + * Here if the dst entry we've looked up + * has a neighbour entry that is in the INCOMPLETE + * state and the src address from the flow is + * marked as OPTIMISTIC, we release the found + * dst entry and replace it instead with the + * dst entry of the nexthop router + */ + if ((*dst)->neighbour && !((*dst)->neighbour->nud_state & NUD_VALID)) { + struct inet6_ifaddr *ifp; + struct flowi fl_gw; + int redirect; - ifp = ipv6_get_ifaddr(net, &fl->fl6_src, - (*dst)->dev, 1); + ifp = ipv6_get_ifaddr(net, &fl->fl6_src, + (*dst)->dev, 1); - redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC); - if (ifp) - in6_ifa_put(ifp); + redirect = (ifp && ifp->flags & IFA_F_OPTIMISTIC); + if (ifp) + in6_ifa_put(ifp); - if (redirect) { - /* - * We need to get the dst entry for the - * default router instead - */ - dst_release(*dst); - memcpy(&fl_gw, fl, sizeof(struct flowi)); - memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr)); - *dst = ip6_route_output(net, sk, &fl_gw); - if ((err = (*dst)->error)) - goto out_err_release; - } + if (redirect) { + /* + * We need to get the dst entry for the + * default router instead + */ + dst_release(*dst); + memcpy(&fl_gw, fl, sizeof(struct flowi)); + memset(&fl_gw.fl6_dst, 0, sizeof(struct in6_addr)); + *dst = ip6_route_output(net, sk, &fl_gw); + if ((err = (*dst)->error)) + goto out_err_release; } + } #endif return 0; From adee14b2e1557d0a8559f29681732d05a89dfc35 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 9 Sep 2008 16:27:49 -0700 Subject: [PATCH 584/638] Linux 2.6.27-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f448e0082eb..4ff83ea36c1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Rotary Wombat # *DOCUMENTATION* From 0e116227a01580acf47437adba3afadf21b6bd5f Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 3 Sep 2008 01:57:14 +0800 Subject: [PATCH 585/638] ocfs2: Fix a bug in direct IO read. ocfs2 will become read-only if we try to read the bytes which pass the end of i_size. This can be easily reproduced by following steps: 1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse. 2. create a small file(say less than 100 bytes) and we will create the file which is allocated 1 cluster. 3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit. 4. The ocfs2 volume becomes read-only and dmesg shows: OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks: Inode 66010 has a hole at block 1 File system is now read-only due to the potential of on-disk corruption. Please run fsck.ocfs2 once the file system is unmounted. So suppress the ERROR message. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 506c24fb507..a53da146627 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -594,7 +594,7 @@ static int ocfs2_direct_IO_get_blocks(struct inode *inode, sector_t iblock, goto bail; } - if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) { + if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) { ocfs2_error(inode->i_sb, "Inode %llu has a hole at block %llu\n", (unsigned long long)OCFS2_I(inode)->ip_blkno, From 4611a771fc8e5ad77d27f25268846abb425101a0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 9 Sep 2008 17:56:47 -0500 Subject: [PATCH 586/638] [IA64] fix compile failure with non modular builds Broke the non modular builds by moving an essential function into modules.c. Fix this by moving it out again and into asm/sections.h as an inline. To do this, the definitions of struct fdesc and struct got_val have been lifted out of modules.c and put in asm/elf.h where they belong. Signed-off-by: James Bottomley Signed-off-by: Tony Luck --- arch/ia64/include/asm/elf.h | 15 +++++++++++++++ arch/ia64/include/asm/sections.h | 13 ++++++++++++- arch/ia64/kernel/module.c | 21 --------------------- 3 files changed, 27 insertions(+), 22 deletions(-) diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h index 5e0c1a6bce8..2acb6b6543c 100644 --- a/arch/ia64/include/asm/elf.h +++ b/arch/ia64/include/asm/elf.h @@ -266,4 +266,19 @@ do { \ } \ } while (0) +/* + * format for entries in the Global Offset Table + */ +struct got_entry { + uint64_t val; +}; + +/* + * Layout of the Function Descriptor + */ +struct fdesc { + uint64_t ip; + uint64_t gp; +}; + #endif /* _ASM_IA64_ELF_H */ diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h index a7acad2bc2f..f6679989103 100644 --- a/arch/ia64/include/asm/sections.h +++ b/arch/ia64/include/asm/sections.h @@ -6,6 +6,8 @@ * David Mosberger-Tang */ +#include +#include #include extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; @@ -22,7 +24,16 @@ extern char __start_unwind[], __end_unwind[]; extern char __start_ivt_text[], __end_ivt_text[]; #undef dereference_function_descriptor -void *dereference_function_descriptor(void *); +static inline void *dereference_function_descriptor(void *ptr) +{ + struct fdesc *desc = ptr; + void *p; + + if (!probe_kernel_address(&desc->ip, p)) + ptr = p; + return ptr; +} + #endif /* _ASM_IA64_SECTIONS_H */ diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 545626f66a4..aaa7d901521 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -31,11 +31,9 @@ #include #include #include -#include #include #include -#include #include #define ARCH_MODULE_DEBUG 0 @@ -137,15 +135,6 @@ static const char *reloc_name[256] = { #undef N -struct got_entry { - uint64_t val; -}; - -struct fdesc { - uint64_t ip; - uint64_t gp; -}; - /* Opaque struct for insns, to protect against derefs. */ struct insn; @@ -943,13 +932,3 @@ module_arch_cleanup (struct module *mod) if (mod->arch.core_unw_table) unw_remove_unwind_table(mod->arch.core_unw_table); } - -void *dereference_function_descriptor(void *ptr) -{ - struct fdesc *desc = ptr; - void *p; - - if (!probe_kernel_address(&desc->ip, p)) - ptr = p; - return ptr; -} From 47633cf0d60bde5581d039ac1283ef4377a6e782 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Tue, 9 Sep 2008 10:34:44 -0500 Subject: [PATCH 587/638] [IA64] fix up bte.h bte.h expects a #define of L1_CACHE_MASK which is currently only in bte.c. This small patch gets bte.h to include cleanly and makes BTE_UNALIGNED_COPY not report errors. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/bte.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h index a0d214f4311..5efecf06c9a 100644 --- a/arch/ia64/include/asm/sn/bte.h +++ b/arch/ia64/include/asm/sn/bte.h @@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long); * until the transfer is complete. In order to get the asynch * version of bte_copy, you must perform this check yourself. */ -#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ - (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ - (dest & L1_CACHE_MASK)) ? \ - bte_unaligned_copy(src, dest, len, mode) : \ +#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ + (((len & (L1_CACHE_BYTES - 1)) || \ + (src & (L1_CACHE_BYTES - 1)) || \ + (dest & (L1_CACHE_BYTES - 1))) ? \ + bte_unaligned_copy(src, dest, len, mode) : \ bte_copy(src, dest, len, mode, NULL)) From 6bf6a1a49377c32a02939ec835553703994f3e41 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 10 Sep 2008 13:57:19 +0200 Subject: [PATCH 588/638] [IA64] arch/ia64/sn/pci/tioca_provider.c: introduce missing kfree Error handling code following a kmalloc should free the allocated data. Signed-off-by: Julia Lawall Signed-off-by: Tony Luck --- arch/ia64/sn/pci/tioca_provider.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 529462c0157..79165122501 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) entry = find_next_zero_bit(map, mapsize, last_entry); } - if (entry > mapsize) + if (entry > mapsize) { + kfree(ca_dmamap); goto map_return; + } for (i = 0; i < entries; i++) set_bit(entry + i, map); From a5827f40afafc864f57a1c44915f0bfaf3d94f53 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 28 Aug 2008 01:05:26 +0300 Subject: [PATCH 589/638] PCI: fix pciehp_free_irq() This patch fixes an obvious bug (loop was never entered) caused by commit 820943b6fc4781621dee52ba026106758a727dd3 (pciehp: cleanup pcie_poll_cmd). Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Acked-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index ab31f5ba665..9d934ddee95 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -258,7 +258,7 @@ static int pcie_poll_cmd(struct controller *ctrl) return 1; } } - while (timeout > 1000) { + while (timeout > 0) { msleep(10); timeout -= 10; if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) { From e7b140365b86aaf94374214c6f4e6decbee2eb0a Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Sun, 31 Aug 2008 11:06:30 -0700 Subject: [PATCH 590/638] [IA64] prevent ia64 from invoking irq handlers on offline CPUs Make ia64 refrain from clearing a given to-be-offlined CPU's bit in the cpu_online_mask until it has processed pending irqs. This change prevents other CPUs from being blindsided by an apparently offline CPU nevertheless changing globally visible state. Also remove the existing redundant cpu_clear(cpu, cpu_online_map). Signed-off-by: Paul E. McKenney Signed-off-by: Tony Luck --- arch/ia64/kernel/smpboot.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index bcea81e432f..d8f05e504fb 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -741,16 +741,14 @@ int __cpu_disable(void) return -EBUSY; } - cpu_clear(cpu, cpu_online_map); - if (migrate_platform_irqs(cpu)) { cpu_set(cpu, cpu_online_map); return (-EBUSY); } remove_siblinginfo(cpu); - cpu_clear(cpu, cpu_online_map); fixup_irqs(); + cpu_clear(cpu, cpu_online_map); local_flush_tlb_all(); cpu_clear(cpu, cpu_callin_map); return 0; From 62ff2ecf7a4e69f7271b7f7a57aaee76ffe610f2 Mon Sep 17 00:00:00 2001 From: Masoud Sharbiani Date: Wed, 10 Sep 2008 22:22:34 +0200 Subject: [PATCH 591/638] ide: Fix pointer arithmetic in hpt3xx driver code (3rd try) git commit 74811f355f4f69a187fa74892dcf2a684b84ce99 causes crash at module load (or boot) time on my machine with a hpt374 controller. The reason for this is that for initializing second controller which sets (hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which advances it by one byte instead of advancing it by sizeof(hpt_info) bytes. Because of this, all initialization functions get corrupted data in info variable which causes a crash at boot time. This patch fixes that and makes my machine boot again. The card itself is a HPT374 raid conroller: Here is the lspci -v output: 03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 8000 [size=8] I/O ports at 7800 [size=4] I/O ports at 7400 [size=8] I/O ports at 7000 [size=4] I/O ports at 6800 [size=256] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev 07) Subsystem: HighPoint Technologies, Inc. Unknown device 0001 Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28 I/O ports at 9800 [size=8] I/O ports at 9400 [size=4] I/O ports at 9000 [size=8] I/O ports at 8800 [size=4] I/O ports at 8400 [size=256] Capabilities: [60] Power Management version 2 Signed-off-by: Masoud Sharbiani Cc: Sergei Shtylyov Cc: Andrew Morton [bart: use dev_get_drvdata() per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index eb107eef0db..c37ab174381 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -613,6 +613,14 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) return 0; } +static struct hpt_info *hpt3xx_get_info(struct device *dev) +{ + struct ide_host *host = dev_get_drvdata(dev); + struct hpt_info *info = (struct hpt_info *)host->host_priv; + + return dev == host->dev[1] ? info + 1 : info; +} + /* * The Marvell bridge chips used on the HighPoint SATA cards do not seem * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... @@ -621,9 +629,7 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) static u8 hpt3xx_udma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 mask = hwif->ultra_mask; switch (info->chip_type) { @@ -662,9 +668,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) static u8 hpt3xx_mdma_filter(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); switch (info->chip_type) { case HPT372 : @@ -700,8 +704,7 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); struct hpt_timings *t = info->timings; u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; @@ -744,8 +747,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); if (drive->quirk_list) { if (info->chip_type >= HPT370) { @@ -973,8 +975,7 @@ static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) { unsigned long io_base = pci_resource_start(dev, 4); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(&dev->dev); const char *name = DRV_NAME; u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */ u8 chip_type; @@ -1217,8 +1218,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev) static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); u8 chip_type = info->chip_type; u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; @@ -1262,8 +1262,7 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]); + struct hpt_info *info = hpt3xx_get_info(hwif->dev); int serialize = HPT_SERIALIZE_IO; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; From 46dfa040f6c26f416a0979a7cd5a2d81f08121d5 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 10 Sep 2008 22:22:34 +0200 Subject: [PATCH 592/638] add deprecated ide-scsi to feature-removal-schedule.txt Signed-off-by: FUJITA Tomonori Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/feature-removal-schedule.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index eb1a47b9742..83c88cae1ed 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -322,3 +322,11 @@ Why: Accounting can now be enabled/disabled without kernel recompilation. controlled by a kernel/module/sysfs/sysctl parameter. Who: Krzysztof Piotr Oledzki +--------------------------- + +What: ide-scsi (BLK_DEV_IDESCSI) +When: 2.6.29 +Why: The 2.6 kernel supports direct writing to ide CD drives, which + eliminates the need for ide-scsi. The new method is more + efficient in every way. +Who: FUJITA Tomonori From 36223a399f639b13b7a454349565934e6d3e2db0 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Wed, 10 Sep 2008 21:07:55 +0100 Subject: [PATCH 593/638] swiotlb: fix back-off path when memory allocation fails This fixes a SWIOTLB oops With SWIOTLB being enabled and straight-forward page allocation failure [1], the swiotlb_alloc_coherent fall-back path hits an issue [2], resulting in my webcam failing to work. At the time of oops, RDI is clearly a pointer to a structure which has arrived as NULL, leading to the typo in swiotlb_map_single's callsite arguments. Correctly passing the device structure [3] addresses the issue and gets my webcam working again (the allocation failure still occuring). --- [1] skype: page allocation failure. order:3, mode:0x1 Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1 Call Trace: [] __alloc_pages_internal+0x4a0/0x5d0 [] alloc_pages_current+0xad/0x110 [] __get_free_pages+0x1d/0x60 [] swiotlb_alloc_coherent+0x49/0x180 [] dma_alloc_coherent+0x281/0x310 [] hcd_buffer_alloc+0x50/0x90 [] usb_buffer_alloc+0x2d/0x40 [] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo] [] uvc_init_video+0x158/0x3e0 [uvcvideo] [] uvc_video_enable+0x37/0x80 [uvcvideo] [] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo] [] ? trace_hardirqs_off_caller+0x21/0xc0 [] ? trace_hardirqs_off_caller+0x21/0xc0 [] video_usercopy+0x19f/0x390 [videodev] [] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo] [] ? put_lock_stats+0xe/0x30 [] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo] [] native_ioctl+0x83/0x90 [compat_ioctl32] [] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32] [] ? do_page_fault+0x3d1/0xae0 [] ? trace_hardirqs_on+0xd/0x10 [] ? trace_hardirqs_on_caller+0x149/0x1b0 [] ? trace_hardirqs_on+0xd/0x10 [] compat_sys_ioctl+0x8a/0x3c0 [] ? trace_hardirqs_off_thunk+0x3a/0x3c [] sysenter_dispatch+0x7/0x2c [] ? trace_hardirqs_on_thunk+0x3a/0x3f Mem-Info: Node 0 DMA per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 CPU 1: hi: 0, btch: 1 usd: 0 Node 0 DMA32 per-cpu: CPU 0: hi: 186, btch: 31 usd: 3 CPU 1: hi: 186, btch: 31 usd: 0 Node 0 Normal per-cpu: CPU 0: hi: 186, btch: 31 usd: 23 CPU 1: hi: 186, btch: 31 usd: 179 Active:78545 inactive:48683 dirty:31 writeback:0 unstable:2 free:830202 slab:17516 mapped:17473 pagetables:3496 bounce:0 Node 0 DMA free:36kB min:28kB low:32kB high:40kB active:0kB inactive:0kB present:15156kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 3207 3956 3956 Node 0 DMA32 free:3197192kB min:6512kB low:8140kB high:9768kB active:0kB inactive:0kB present:3284896kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 748 748 Node 0 Normal free:123580kB min:1516kB low:1892kB high:2272kB active:314180kB inactive:194732kB present:766464kB pages_scanned:0 all_unreclaimable? no lowmem_reserve[]: 0 0 0 0 Node 0 DMA: 1*4kB 0*8kB 0*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 36kB Node 0 DMA32: 4*4kB 3*8kB 2*16kB 3*32kB 4*64kB 5*128kB 3*256kB 5*512kB 4*1024kB 5*2048kB 776*4096kB = 3197224kB Node 0 Normal: 14*4kB 14*8kB 8*16kB 6*32kB 1*64kB 3*128kB 3*256kB 2*512kB 4*1024kB 1*2048kB 28*4096kB = 123560kB 64847 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 502752kB Total swap = 502752kB 1048576 pages RAM 52120 pages reserved 71967 pages shared 143004 pages non-shared --- [2] BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8 IP: [] map_single+0x1c/0x280 PGD 10e54e067 PUD 10e595067 PMD 0 Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: kvm_intel kvm microcode uvcvideo compat_ioctl32 videodev v4l1_compat shpchp pci_hotplug Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1 RIP: 0010:[] [] map_single+0x1c/0x280 RSP: 0018:ffff88010e78d988 EFLAGS: 00210296 RAX: 0000780000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000005000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88010e78d9e8 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88010e78d698 R11: 0000000000000001 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000005000 R15: ffff88012f1c9968 FS: 0000000000000000(0000) GS:ffffffff80a6cdc0(0063) knlGS:00000000f6355b90 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000000002c8 CR3: 000000010e57d000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process skype (pid: 5895, threadinfo ffff88010e78c000, task ffff88012b9cc460) Stack: 0000000200000000 0000000000005000 0000000000000000 0000000000000000 00000000000017b8 0000000000000000 ffff88010e78d9c8 0000000000000000 0000000000000002 0000000000000000 0000000000005000 ffff88012f1c9968 Call Trace: [] swiotlb_map_single_attrs+0x60/0xf0 [] swiotlb_map_single+0xc/0x10 [] swiotlb_alloc_coherent+0xfe/0x180 [] dma_alloc_coherent+0x281/0x310 [] hcd_buffer_alloc+0x50/0x90 [] usb_buffer_alloc+0x2d/0x40 [] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo] [] uvc_init_video+0x158/0x3e0 [uvcvideo] [] uvc_video_enable+0x37/0x80 [uvcvideo] [] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo] [] ? trace_hardirqs_off_caller+0x21/0xc0 [] ? trace_hardirqs_off_caller+0x21/0xc0 [] video_usercopy+0x19f/0x390 [videodev] [] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo] [] ? put_lock_stats+0xe/0x30 [] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo] [] native_ioctl+0x83/0x90 [compat_ioctl32] [] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32] [] ? do_page_fault+0x3d1/0xae0 [] ? trace_hardirqs_on+0xd/0x10 [] ? trace_hardirqs_on_caller+0x149/0x1b0 [] ? trace_hardirqs_on+0xd/0x10 [] compat_sys_ioctl+0x8a/0x3c0 [] ? trace_hardirqs_off_thunk+0x3a/0x3c [] sysenter_dispatch+0x7/0x2c [] ? trace_hardirqs_on_thunk+0x3a/0x3f Code: 45 31 c0 48 89 e5 e8 a4 ff ff ff c9 c3 66 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 38 48 89 75 b0 48 89 55 a8 89 4d a4 <48> 8b 87 c8 02 00 00 48 85 c0 0f 84 1c 02 00 00 48 8b 58 08 48 RIP [] map_single+0x1c/0x280 RSP CR2: 00000000000002c8 ---[ end trace 5d15baeeb7025a0e ]--- --- [3] ffffffff8046c830 : map_single(): /store/kernel/linux/lib/swiotlb.c:291 ffffffff8046c830: 55 push %rbp ffffffff8046c831: 48 89 e5 mov %rsp,%rbp ffffffff8046c834: 41 57 push %r15 ffffffff8046c836: 41 56 push %r14 ffffffff8046c838: 41 55 push %r13 ffffffff8046c83a: 41 54 push %r12 ffffffff8046c83c: 53 push %rbx ffffffff8046c83d: 48 83 ec 38 sub $0x38,%rsp ffffffff8046c841: 48 89 75 b0 mov %rsi,-0x50(%rbp) ffffffff8046c845: 48 89 55 a8 mov %rdx,-0x58(%rbp) ffffffff8046c849: 89 4d a4 mov %ecx,-0x5c(%rbp) dma_get_seg_boundary(): /store/kernel/linux/include/linux/dma-mapping.h:80 ffffffff8046c84c: 48 8b 87 c8 02 00 00 mov 0x2c8(%rdi),%rax <---- --- [4] Signed-off-by: Daniel J Blueman Signed-off-by: Linus Torvalds --- lib/swiotlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 977edbdbc1d..8826fdf0f18 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -491,7 +491,7 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, * the lowest available address range. */ dma_addr_t handle; - handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE); + handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE); if (swiotlb_dma_mapping_error(hwdev, handle)) return NULL; From ebfb2c63405f2410897674f14e41c031c9302909 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 10 Sep 2008 14:08:27 -0700 Subject: [PATCH 594/638] sparc64: Fix interrupt register calculations on Psycho and Sabre. Use the IMAP offset calculation for OBIO devices as documented in the programmer's manual. Which is "0x10000 + ((ino & 0x1f) << 3)" Signed-off-by: David S. Miller --- arch/sparc64/kernel/prom.c | 102 ++----------------------------------- 1 file changed, 5 insertions(+), 97 deletions(-) diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 3c048ac4e63..7151513f156 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -156,55 +156,11 @@ static unsigned long psycho_pcislot_imap_offset(unsigned long ino) return PSYCHO_IMAP_B_SLOT0 + (slot * 8); } -#define PSYCHO_IMAP_SCSI 0x1000UL -#define PSYCHO_IMAP_ETH 0x1008UL -#define PSYCHO_IMAP_BPP 0x1010UL -#define PSYCHO_IMAP_AU_REC 0x1018UL -#define PSYCHO_IMAP_AU_PLAY 0x1020UL -#define PSYCHO_IMAP_PFAIL 0x1028UL -#define PSYCHO_IMAP_KMS 0x1030UL -#define PSYCHO_IMAP_FLPY 0x1038UL -#define PSYCHO_IMAP_SHW 0x1040UL -#define PSYCHO_IMAP_KBD 0x1048UL -#define PSYCHO_IMAP_MS 0x1050UL -#define PSYCHO_IMAP_SER 0x1058UL -#define PSYCHO_IMAP_TIM0 0x1060UL -#define PSYCHO_IMAP_TIM1 0x1068UL -#define PSYCHO_IMAP_UE 0x1070UL -#define PSYCHO_IMAP_CE 0x1078UL -#define PSYCHO_IMAP_A_ERR 0x1080UL -#define PSYCHO_IMAP_B_ERR 0x1088UL -#define PSYCHO_IMAP_PMGMT 0x1090UL -#define PSYCHO_IMAP_GFX 0x1098UL -#define PSYCHO_IMAP_EUPA 0x10a0UL +#define PSYCHO_OBIO_IMAP_BASE 0x1000UL -static unsigned long __psycho_onboard_imap_off[] = { -/*0x20*/ PSYCHO_IMAP_SCSI, -/*0x21*/ PSYCHO_IMAP_ETH, -/*0x22*/ PSYCHO_IMAP_BPP, -/*0x23*/ PSYCHO_IMAP_AU_REC, -/*0x24*/ PSYCHO_IMAP_AU_PLAY, -/*0x25*/ PSYCHO_IMAP_PFAIL, -/*0x26*/ PSYCHO_IMAP_KMS, -/*0x27*/ PSYCHO_IMAP_FLPY, -/*0x28*/ PSYCHO_IMAP_SHW, -/*0x29*/ PSYCHO_IMAP_KBD, -/*0x2a*/ PSYCHO_IMAP_MS, -/*0x2b*/ PSYCHO_IMAP_SER, -/*0x2c*/ PSYCHO_IMAP_TIM0, -/*0x2d*/ PSYCHO_IMAP_TIM1, -/*0x2e*/ PSYCHO_IMAP_UE, -/*0x2f*/ PSYCHO_IMAP_CE, -/*0x30*/ PSYCHO_IMAP_A_ERR, -/*0x31*/ PSYCHO_IMAP_B_ERR, -/*0x32*/ PSYCHO_IMAP_PMGMT, -/*0x33*/ PSYCHO_IMAP_GFX, -/*0x34*/ PSYCHO_IMAP_EUPA, -}; #define PSYCHO_ONBOARD_IRQ_BASE 0x20 -#define PSYCHO_ONBOARD_IRQ_LAST 0x34 #define psycho_onboard_imap_offset(__ino) \ - __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE] + (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3)) #define PSYCHO_ICLR_A_SLOT0 0x1400UL #define PSYCHO_ICLR_SCSI 0x1800UL @@ -228,10 +184,6 @@ static unsigned int psycho_irq_build(struct device_node *dp, imap_off = psycho_pcislot_imap_offset(ino); } else { /* Onboard device */ - if (ino > PSYCHO_ONBOARD_IRQ_LAST) { - prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino); - prom_halt(); - } imap_off = psycho_onboard_imap_offset(ino); } @@ -318,23 +270,6 @@ static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2) #define SABRE_IMAP_A_SLOT0 0x0c00UL #define SABRE_IMAP_B_SLOT0 0x0c20UL -#define SABRE_IMAP_SCSI 0x1000UL -#define SABRE_IMAP_ETH 0x1008UL -#define SABRE_IMAP_BPP 0x1010UL -#define SABRE_IMAP_AU_REC 0x1018UL -#define SABRE_IMAP_AU_PLAY 0x1020UL -#define SABRE_IMAP_PFAIL 0x1028UL -#define SABRE_IMAP_KMS 0x1030UL -#define SABRE_IMAP_FLPY 0x1038UL -#define SABRE_IMAP_SHW 0x1040UL -#define SABRE_IMAP_KBD 0x1048UL -#define SABRE_IMAP_MS 0x1050UL -#define SABRE_IMAP_SER 0x1058UL -#define SABRE_IMAP_UE 0x1070UL -#define SABRE_IMAP_CE 0x1078UL -#define SABRE_IMAP_PCIERR 0x1080UL -#define SABRE_IMAP_GFX 0x1098UL -#define SABRE_IMAP_EUPA 0x10a0UL #define SABRE_ICLR_A_SLOT0 0x1400UL #define SABRE_ICLR_B_SLOT0 0x1480UL #define SABRE_ICLR_SCSI 0x1800UL @@ -364,33 +299,10 @@ static unsigned long sabre_pcislot_imap_offset(unsigned long ino) return SABRE_IMAP_B_SLOT0 + (slot * 8); } -static unsigned long __sabre_onboard_imap_off[] = { -/*0x20*/ SABRE_IMAP_SCSI, -/*0x21*/ SABRE_IMAP_ETH, -/*0x22*/ SABRE_IMAP_BPP, -/*0x23*/ SABRE_IMAP_AU_REC, -/*0x24*/ SABRE_IMAP_AU_PLAY, -/*0x25*/ SABRE_IMAP_PFAIL, -/*0x26*/ SABRE_IMAP_KMS, -/*0x27*/ SABRE_IMAP_FLPY, -/*0x28*/ SABRE_IMAP_SHW, -/*0x29*/ SABRE_IMAP_KBD, -/*0x2a*/ SABRE_IMAP_MS, -/*0x2b*/ SABRE_IMAP_SER, -/*0x2c*/ 0 /* reserved */, -/*0x2d*/ 0 /* reserved */, -/*0x2e*/ SABRE_IMAP_UE, -/*0x2f*/ SABRE_IMAP_CE, -/*0x30*/ SABRE_IMAP_PCIERR, -/*0x31*/ 0 /* reserved */, -/*0x32*/ 0 /* reserved */, -/*0x33*/ SABRE_IMAP_GFX, -/*0x34*/ SABRE_IMAP_EUPA, -}; -#define SABRE_ONBOARD_IRQ_BASE 0x20 -#define SABRE_ONBOARD_IRQ_LAST 0x30 +#define SABRE_OBIO_IMAP_BASE 0x1000UL +#define SABRE_ONBOARD_IRQ_BASE 0x20 #define sabre_onboard_imap_offset(__ino) \ - __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE] + (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3)) #define sabre_iclr_offset(ino) \ ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \ @@ -453,10 +365,6 @@ static unsigned int sabre_irq_build(struct device_node *dp, imap_off = sabre_pcislot_imap_offset(ino); } else { /* onboard device */ - if (ino > SABRE_ONBOARD_IRQ_LAST) { - prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino); - prom_halt(); - } imap_off = sabre_onboard_imap_offset(ino); } From 5368f69c8b155d6e82dfc622d817c882689e9cd9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Sep 2008 22:15:18 +0200 Subject: [PATCH 595/638] VIDEO_SH_MOBILE_CEU should depend on HAS_DMA commit 0d3244d6439c8c31d2a29efd587c7aca9042c8aa ("V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG. Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this. Signed-off-by: Geert Uytterhoeven Acked-by: Paul Mundt Acked-by: Magnus Damm Signed-off-by: Linus Torvalds --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ecbfa1b39b7..3e9e0dcd217 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -968,7 +968,7 @@ config VIDEO_PXA27x config VIDEO_SH_MOBILE_CEU tristate "SuperH Mobile CEU Interface driver" - depends on VIDEO_DEV + depends on VIDEO_DEV && HAS_DMA select SOC_CAMERA select VIDEOBUF_DMA_CONTIG ---help--- From 9e7222c83560186686319f2892f43fc557baed2d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Sep 2008 22:15:19 +0200 Subject: [PATCH 596/638] m68k: Update defconfigs for 2.6.27-rc6 Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/m68k/configs/amiga_defconfig | 53 ++++++++++++++---------- arch/m68k/configs/apollo_defconfig | 53 ++++++++++++++---------- arch/m68k/configs/atari_defconfig | 60 ++++++++++++++++----------- arch/m68k/configs/bvme6000_defconfig | 52 ++++++++++++++--------- arch/m68k/configs/hp300_defconfig | 52 ++++++++++++++--------- arch/m68k/configs/mac_defconfig | 53 ++++++++++++++---------- arch/m68k/configs/multi_defconfig | 62 ++++++++++++++++------------ arch/m68k/configs/mvme147_defconfig | 52 ++++++++++++++--------- arch/m68k/configs/mvme16x_defconfig | 52 ++++++++++++++--------- arch/m68k/configs/q40_defconfig | 53 ++++++++++++++---------- arch/m68k/configs/sun3_defconfig | 54 +++++++++++++----------- arch/m68k/configs/sun3x_defconfig | 52 ++++++++++++++--------- 12 files changed, 390 insertions(+), 258 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 8e2a0f5faf5..8bd61a640fc 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:00 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ZORRO_NAMES=y - -# -# Networking -# CONFIG_NET=y # @@ -183,6 +185,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -844,10 +851,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND=m @@ -861,6 +864,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -899,6 +903,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index e2d511e2a1d..c41b854c028 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:01 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -178,6 +180,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -532,7 +536,6 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_APOLLO_ELPLUS=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -738,10 +745,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -753,6 +756,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -789,6 +793,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -860,18 +866,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 6e20d656ada..654c5acb9e8 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:02 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -179,6 +181,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_FALCON_IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -782,10 +789,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND=m @@ -799,6 +802,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -806,11 +810,8 @@ CONFIG_HIDRAW=y # Character devices # CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_SCC=y -CONFIG_ATARI_SCC_DMA=y CONFIG_ATARI_MIDI=m CONFIG_ATARI_DSP56K=m -# CONFIG_SERIAL_CONSOLE is not set # # File systems @@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -840,6 +843,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index a0a9b30bb50..2e44af0fe54 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:03 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -723,6 +727,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -759,6 +764,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -830,18 +837,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=m # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 6778041de26..3570fc89b08 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:04 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -179,6 +181,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -747,10 +755,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -762,6 +766,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -796,6 +801,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -867,18 +874,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 7cd37574034..db6e8822594 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:06 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_MAC_IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_MACINTOSH_DRIVERS=y @@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -799,6 +802,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -836,6 +840,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 0747fa3984d..1a806102b99 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:07 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_ZORRO_NAMES=y - -# -# Networking -# CONFIG_NET=y # @@ -190,6 +192,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_BLK_DEV_Q40IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_MACINTOSH_DRIVERS=y @@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -632,7 +635,6 @@ CONFIG_A2065=m CONFIG_HYDRA=m CONFIG_ZORRO8390=m CONFIG_APNE=m -CONFIG_APOLLO_ELPLUS=y CONFIG_MAC8390=y CONFIG_MAC89x0=m CONFIG_MACSONIC=m @@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_MAC_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_DMASOUND_PAULA=m @@ -942,6 +944,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -949,8 +952,6 @@ CONFIG_HIDRAW=y # Character devices # CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_SCC=y -CONFIG_ATARI_SCC_DMA=y CONFIG_ATARI_MIDI=m CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y @@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -992,6 +995,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e7a8246840b..cacb5aef6a3 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:08 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -722,6 +726,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -758,6 +763,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -829,18 +836,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index ab536eb172b..a183e25e348 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:09 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -723,6 +727,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -760,6 +765,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -831,18 +838,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index e05be687b50..72eaff0776b 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:10 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -163,10 +169,6 @@ CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -180,6 +182,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set @@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_Q40IDE=y # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -792,10 +799,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_DMASOUND=m @@ -809,6 +812,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -843,6 +847,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 296340d2b31..cb62b96d766 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:11 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -166,6 +168,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -727,10 +732,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -776,6 +777,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -847,18 +850,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 8d3a416c92b..04b4363a705 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed May 28 22:47:35 2008 +# Linux kernel version: 2.6.27-rc6 +# Wed Sep 10 09:02:12 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -52,7 +52,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -75,10 +74,16 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set # CONFIG_HAVE_OPROFILE is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -95,6 +100,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m CONFIG_PROC_HARDWARE=y CONFIG_ZONE_DMA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# Networking -# CONFIG_NET=y # @@ -177,6 +179,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set @@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=m # CONFIG_MTD is not set @@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y +# CONFIG_SCSI_DH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m +# CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m # CONFIG_DM_DEBUG is not set @@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m -CONFIG_DM_MULTIPATH_RDAC=m -CONFIG_DM_MULTIPATH_HP=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set # # Multimedia devices @@ -737,10 +745,6 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m @@ -752,6 +756,7 @@ CONFIG_HIDRAW=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -786,6 +791,7 @@ CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m +# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set CONFIG_HPFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -857,18 +864,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BIND34=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=m -# CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # @@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # @@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set From bdba4d6b77fcc76f206986d7cc55f1feb20301f8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 10 Sep 2008 23:38:51 -0700 Subject: [PATCH 597/638] sparc32: Fix function signature of of_bus_sbus_get_flags(). This doesn't match the function pointer type it gets assigned to. Luckily, this was harmless. Signed-off-by: David S. Miller --- arch/sparc/kernel/of_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index c481d45f97b..f58c537446a 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -241,7 +241,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) return of_bus_default_map(addr, range, na, ns, pna); } -static unsigned int of_bus_sbus_get_flags(const u32 *addr) +static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags) { return IORESOURCE_MEM; } From 44874f84918e37b64bec6df1587e5fe2fdf6ab62 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 27 Aug 2008 14:18:43 +0200 Subject: [PATCH 598/638] KVM: SVM: fix random segfaults with NPT enabled This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes random segfaults and #UD exceptions in the guest seen under some workloads (e.g. long running compile workloads or tbench). A kernbench run with and without that fix showed that it has a slowdown lower than 0.5% Cc: stable@kernel.org Signed-off-by: Joerg Roedel Signed-off-by: Alexander Graf Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index e2ee264740c..d1106cddab0 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -62,6 +62,7 @@ static int npt = 1; module_param(npt, int, S_IRUGO); static void kvm_reput_irq(struct vcpu_svm *svm); +static void svm_flush_tlb(struct kvm_vcpu *vcpu); static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu) { @@ -1027,6 +1028,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code, (u32)fault_address, (u32)(fault_address >> 32), handler); + /* + * FIXME: Tis shouldn't be necessary here, but there is a flush + * missing in the MMU code. Until we find this bug, flush the + * complete TLB here on an NPF + */ + if (npt_enabled) + svm_flush_tlb(&svm->vcpu); if (event_injection) kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address); From e5eab0cede4b1ffaca4ad857d840127622038e55 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 9 Sep 2008 19:11:51 +0200 Subject: [PATCH 599/638] KVM: SVM: fix guest global tlb flushes with NPT Accesses to CR4 are intercepted even with Nested Paging enabled. But the code does not check if the guest wants to do a global TLB flush. So this flush gets lost. This patch adds the check and the flush to svm_set_cr4. Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index d1106cddab0..8233b86c778 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -879,6 +879,10 @@ set: static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE; + unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4; + + if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE)) + force_new_asid(vcpu); vcpu->arch.cr4 = cr4; if (!npt_enabled) From 534e38b447df47f129a6d3ec3af6705c1e3f651e Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Mon, 8 Sep 2008 15:12:30 +0800 Subject: [PATCH 600/638] KVM: VMX: Always return old for clear_flush_young() when using EPT As well as discard fake accessed bit and dirty bit of EPT. Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 4 ++++ arch/x86/kvm/vmx.c | 3 +-- arch/x86/kvm/vmx.h | 2 -- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 0bfe2bd305e..3da2508eb22 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -711,6 +711,10 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) u64 *spte; int young = 0; + /* always return old for EPT */ + if (!shadow_accessed_mask) + return 0; + spte = rmap_next(kvm, rmapp, NULL); while (spte) { int _young; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2a69773e3b2..7041cc52b56 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3301,8 +3301,7 @@ static int __init vmx_init(void) kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | VMX_EPT_WRITABLE_MASK | VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); - kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, - VMX_EPT_FAKE_DIRTY_MASK, 0ull, + kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull, VMX_EPT_EXECUTABLE_MASK); kvm_enable_tdp(); } else diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 425a13436b3..23e8373507a 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -370,8 +370,6 @@ enum vmcs_field { #define VMX_EPT_READABLE_MASK 0x1ull #define VMX_EPT_WRITABLE_MASK 0x2ull #define VMX_EPT_EXECUTABLE_MASK 0x4ull -#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62) -#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63) #define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul From 7736c09c6cf9521f2413d78856a66f4a37046e84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 9 Sep 2008 10:16:22 +0100 Subject: [PATCH 601/638] [ARM] OMAP: Fix MMC device data OMAPs MMC device data was passing the wrong structure via the platform device. Moreover, a missing function means that both sx1_defconfig and omap_h2_1610_defconfig builds failed with undefined reference to `omap_set_mmc_info' errors. Fix this by updating the MMC support from the omapzoom tree. Signed-off-by: Russell King --- arch/arm/plat-omap/devices.c | 131 +++++++++++++++++++++++++---------- 1 file changed, 95 insertions(+), 36 deletions(-) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 187e3d8bfdf..bc1cf30c83e 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ + defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MMC1_BASE 0x4809c000 -#define OMAP_MMC1_INT INT_24XX_MMC_IRQ -#else -#define OMAP_MMC1_BASE 0xfffb7800 -#define OMAP_MMC1_INT INT_MMC -#endif -#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x1fc) +#define OMAP_MMC1_INT INT_24XX_MMC_IRQ -static struct omap_mmc_conf mmc1_conf; +#define OMAP_MMC2_BASE 0x480b4000 +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x1fc) +#define OMAP_MMC2_INT INT_24XX_MMC2_IRQ + +#else + +#define OMAP_MMC1_BASE 0xfffb7800 +#define OMAP_MMC1_END (OMAP_MMC1_BASE + 0x7f) +#define OMAP_MMC1_INT INT_MMC + +#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */ +#define OMAP_MMC2_END (OMAP_MMC2_BASE + 0x7f) +#define OMAP_MMC2_INT INT_1610_MMC2 + +#endif + +static struct omap_mmc_platform_data mmc1_data; static u64 mmc1_dmamask = 0xffffffff; static struct resource mmc1_resources[] = { { .start = OMAP_MMC1_BASE, - .end = OMAP_MMC1_BASE + 0x7f, + .end = OMAP_MMC1_END, .flags = IORESOURCE_MEM, }, { @@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = { .id = 1, .dev = { .dma_mask = &mmc1_dmamask, - .platform_data = &mmc1_conf, + .platform_data = &mmc1_data, }, .num_resources = ARRAY_SIZE(mmc1_resources), .resource = mmc1_resources, }; -#ifdef CONFIG_ARCH_OMAP16XX +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) -static struct omap_mmc_conf mmc2_conf; +static struct omap_mmc_platform_data mmc2_data; static u64 mmc2_dmamask = 0xffffffff; static struct resource mmc2_resources[] = { { .start = OMAP_MMC2_BASE, - .end = OMAP_MMC2_BASE + 0x7f, + .end = OMAP_MMC2_END, .flags = IORESOURCE_MEM, }, { - .start = INT_1610_MMC2, + .start = OMAP_MMC2_INT, .flags = IORESOURCE_IRQ, }, }; @@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = { .id = 2, .dev = { .dma_mask = &mmc2_dmamask, - .platform_data = &mmc2_conf, + .platform_data = &mmc2_data, }, .num_resources = ARRAY_SIZE(mmc2_resources), .resource = mmc2_resources, }; #endif -static void __init omap_init_mmc(void) +static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf) { - const struct omap_mmc_config *mmc_conf; - const struct omap_mmc_conf *mmc; - - /* NOTE: assumes MMC was never (wrongly) enabled */ - mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); - if (!mmc_conf) + if (cpu_is_omap2430() || cpu_is_omap34xx()) return; - /* block 1 is always available and has just one pinout option */ - mmc = &mmc_conf->mmc[0]; - if (mmc->enabled) { + if (mmc_conf->mmc[0].enabled) { if (cpu_is_omap24xx()) { omap_cfg_reg(H18_24XX_MMC_CMD); omap_cfg_reg(H15_24XX_MMC_CLKI); @@ -292,7 +300,7 @@ static void __init omap_init_mmc(void) omap_cfg_reg(P20_1710_MMC_DATDIR0); } } - if (mmc->wire4) { + if (mmc_conf->mmc[0].wire4) { if (cpu_is_omap24xx()) { omap_cfg_reg(H14_24XX_MMC_DAT1); omap_cfg_reg(E19_24XX_MMC_DAT2); @@ -303,25 +311,35 @@ static void __init omap_init_mmc(void) } else { omap_cfg_reg(MMC_DAT1); /* NOTE: DAT2 can be on W10 (here) or M15 */ - if (!mmc->nomux) + if (!mmc_conf->mmc[0].nomux) omap_cfg_reg(MMC_DAT2); omap_cfg_reg(MMC_DAT3); } } - mmc1_conf = *mmc; - (void) platform_device_register(&mmc_omap_device1); +#if defined(CONFIG_ARCH_OMAP2420) + if (mmc_conf->mmc[0].internal_clock) { + /* + * Use internal loop-back in MMC/SDIO + * Module Input Clock selection + */ + if (cpu_is_omap24xx()) { + u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); + v |= (1 << 24); /* not used in 243x */ + omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + } + } +#endif } #ifdef CONFIG_ARCH_OMAP16XX /* block 2 is on newer chips, and has many pinout options */ - mmc = &mmc_conf->mmc[1]; - if (mmc->enabled) { - if (!mmc->nomux) { + if (mmc_conf->mmc[1].enabled) { + if (!mmc_conf->mmc[1].nomux) { omap_cfg_reg(Y8_1610_MMC2_CMD); omap_cfg_reg(Y10_1610_MMC2_CLK); omap_cfg_reg(R18_1610_MMC2_CLKIN); omap_cfg_reg(W8_1610_MMC2_DAT0); - if (mmc->wire4) { + if (mmc_conf->mmc[1].wire4) { omap_cfg_reg(V8_1610_MMC2_DAT1); omap_cfg_reg(W15_1610_MMC2_DAT2); omap_cfg_reg(R10_1610_MMC2_DAT3); @@ -337,14 +355,55 @@ static void __init omap_init_mmc(void) if (cpu_is_omap1710()) omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24), MOD_CONF_CTRL_1); - mmc2_conf = *mmc; + } +#endif +} + +static void __init omap_init_mmc(void) +{ + const struct omap_mmc_config *mmc_conf; + + /* NOTE: assumes MMC was never (wrongly) enabled */ + mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config); + if (!mmc_conf) + return; + + omap_init_mmc_conf(mmc_conf); + + if (mmc_conf->mmc[0].enabled) { + mmc1_data.conf = mmc_conf->mmc[0]; + (void) platform_device_register(&mmc_omap_device1); + } + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + if (mmc_conf->mmc[1].enabled) { + mmc2_data.conf = mmc_conf->mmc[1]; (void) platform_device_register(&mmc_omap_device2); } #endif - return; } + +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) +{ + switch (host) { + case 1: + mmc1_data = *info; + break; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \ + defined(CONFIG_ARCH_OMAP34XX) + case 2: + mmc2_data = *info; + break; +#endif + default: + BUG(); + } +} + #else static inline void omap_init_mmc(void) {} +void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {} #endif /*-------------------------------------------------------------------------*/ From 2dc75d3c3b49c64fd26b4832a7efb75546cb3fc5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 11 Sep 2008 14:20:23 +0200 Subject: [PATCH 602/638] block: disable sysfs parts of the disk command filter We still have life time issues with the sysfs command filter kobject, so disable it for 2.6.27 release. We can revisit this and make it work properly for 2.6.28, for 2.6.27 release it's too risky. Signed-off-by: Jens Axboe --- block/cmd-filter.c | 2 ++ drivers/ide/ide-cd.c | 2 -- drivers/scsi/sd.c | 2 -- drivers/scsi/sr.c | 2 -- include/linux/blkdev.h | 2 -- 5 files changed, 2 insertions(+), 8 deletions(-) diff --git a/block/cmd-filter.c b/block/cmd-filter.c index 228b6447e89..79c14996ac1 100644 --- a/block/cmd-filter.c +++ b/block/cmd-filter.c @@ -49,6 +49,7 @@ int blk_verify_command(struct blk_cmd_filter *filter, } EXPORT_SYMBOL(blk_verify_command); +#if 0 /* and now, the sysfs stuff */ static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page, int rw) @@ -233,3 +234,4 @@ void blk_unregister_filter(struct gendisk *disk) kobject_put(disk->holder_dir->parent); } EXPORT_SYMBOL(blk_unregister_filter); +#endif diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index f1489999cf9..49a8c589e34 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1933,7 +1933,6 @@ static void ide_cd_remove(ide_drive_t *drive) ide_proc_unregister_driver(drive, info->driver); - blk_unregister_filter(info->disk); del_gendisk(info->disk); ide_cd_put(info); @@ -2159,7 +2158,6 @@ static int ide_cd_probe(ide_drive_t *drive) g->fops = &idecd_ops; g->flags |= GENHD_FL_REMOVABLE; add_disk(g); - blk_register_filter(g); return 0; out_free_cd: diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 2a2bc89aba8..e5e7d785645 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1875,7 +1875,6 @@ static int sd_probe(struct device *dev) dev_set_drvdata(dev, sdkp); add_disk(gd); - blk_register_filter(gd); sd_dif_config_host(sdkp); sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", @@ -1909,7 +1908,6 @@ static int sd_remove(struct device *dev) struct scsi_disk *sdkp = dev_get_drvdata(dev); device_del(&sdkp->dev); - blk_unregister_filter(sdkp->disk); del_gendisk(sdkp->disk); sd_shutdown(dev); diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 3292965bfd8..27f5bfd1def 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -656,7 +656,6 @@ static int sr_probe(struct device *dev) dev_set_drvdata(dev, cd); disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); - blk_register_filter(disk); sdev_printk(KERN_DEBUG, sdev, "Attached scsi CD-ROM %s\n", cd->cdi.name); @@ -895,7 +894,6 @@ static int sr_remove(struct device *dev) { struct scsi_cd *cd = dev_get_drvdata(dev); - blk_unregister_filter(cd->disk); del_gendisk(cd->disk); mutex_lock(&sr_ref_mutex); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 44710d7e7bf..53ea933cf60 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -843,8 +843,6 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *); */ extern int blk_verify_command(struct blk_cmd_filter *filter, unsigned char *cmd, int has_write_perm); -extern int blk_register_filter(struct gendisk *disk); -extern void blk_unregister_filter(struct gendisk *disk); extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter); #define MAX_PHYS_SEGMENTS 128 From 69da6b87fcb270f758fe75141c32e041f8db510c Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Mon, 11 Aug 2008 14:01:50 +0300 Subject: [PATCH 603/638] ath9k: Assign seq# when mac80211 requests this Use TX control flag IEEE80211_TX_CTL_ASSIGN_SEQ as a request to update the seq# for the frames. This will likely require some further cleanup to get seq# correctly for Beacons vs. other frames and also potentially for multiple BSSes. Anyway, this is better than ending up sending out most frames with seq# 0. (This is a backport of patch w/ same title already in net-next-2.6. It is verified to fix http://bugzilla.kernel.org/show_bug.cgi?id=11394 and it should be acceptable for -rc due to the driver being new in 2.6.27.) Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/beacon.c | 13 +++++++++++++ drivers/net/wireless/ath9k/core.h | 1 + drivers/net/wireless/ath9k/main.c | 14 ++++++++++++++ 3 files changed, 28 insertions(+) diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index caf569401a3..00a0eaa0886 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) unsigned int curlen; struct ath_txq *cabq; struct ath_txq *mcastq; + struct ieee80211_tx_info *info; avp = sc->sc_vaps[if_id]; mcastq = &avp->av_mcastq; @@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) */ curlen = skb->len; + info = IEEE80211_SKB_CB(skb); + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + /* + * TODO: make sure the seq# gets assigned properly (vs. other + * TX frames) + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + /* XXX: spin_lock_bh should not be used here, but sparse bitches * otherwise. We should fix sparse :) */ spin_lock_bh(&mcastq->axq_lock); diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 673b3d81133..4ee695b76b8 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -992,6 +992,7 @@ struct ath_softc { u32 sc_txintrperiod; /* tx interrupt batching */ int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */ u32 sc_ant_tx[8]; /* recent tx frames/antenna */ + u16 seq_no; /* TX sequence number */ /* Beacon */ struct ath9k_tx_queue_info sc_beacon_qi; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index c5107f269f2..99badf1404c 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw, { struct ath_softc *sc = hw->priv; int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } /* Add the padding after the header if this is not already done */ hdrlen = ieee80211_get_hdrlen_from_skb(skb); From 50bed2e2862a8f3a4f7d683d0d27292e71ef18b9 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 11 Sep 2008 18:35:39 +0200 Subject: [PATCH 604/638] sg: disable interrupts inside sg_copy_buffer The callers of sg_copy_buffer must disable interrupts before calling it (since it uses kmap_atomic). Some callers use it on interrupt-disabled code but some need to take the trouble to disable interrupts just for this. No wonder they forget about it and we hit a bug like: http://bugzilla.kernel.org/show_bug.cgi?id=11529 James said that it might be better to disable interrupts inside the function rather than risk the callers getting it wrong. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- lib/scatterlist.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/scatterlist.c b/lib/scatterlist.c index 876ba6d5b67..8d2688ff135 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -422,9 +422,12 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, { unsigned int offset = 0; struct sg_mapping_iter miter; + unsigned long flags; sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC); + local_irq_save(flags); + while (sg_miter_next(&miter) && offset < buflen) { unsigned int len; @@ -442,6 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents, sg_miter_stop(&miter); + local_irq_restore(flags); return offset; } From d1c6d2e547148c5aa0c0a4ff6aac82f7c6da1d8b Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 11 Sep 2008 17:18:56 +0100 Subject: [PATCH 605/638] MN10300: Change the fault handler to check in_atomic() not in_interrupt() Change the MN10300 fault handler to make it check in_atomic() rather than in_interrupt() as commit 6edaf68a87d17570790fd55f0c451a29ec1d6703 did for other architectures: Author: Peter Zijlstra Date: Wed Dec 6 20:32:18 2006 -0800 [PATCH] mm: arch do_page_fault() vs in_atomic() In light of the recent pagefault and filemap_copy_from_user work I've gone through all the arch pagefault handlers to make sure the inc_preempt_count() 'feature' works as expected. Several sections of code (including the new filemap_copy_from_user) rely on the fact that faults do not take locks under increased preempt count. Signed-off-by: David Howells Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- arch/mn10300/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c index 78f092ca031..33cf25025da 100644 --- a/arch/mn10300/mm/fault.c +++ b/arch/mn10300/mm/fault.c @@ -174,7 +174,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code, * If we're in an interrupt or have no user * context, we must not take the fault.. */ - if (in_interrupt() || !mm) + if (in_atomic() || !mm) goto no_context; down_read(&mm->mmap_sem); From 7c6a329e444725f24c02192ac493d8a7cd9fa638 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 12 Sep 2008 03:11:54 +0200 Subject: [PATCH 606/638] [Bluetooth] Fix regression from using default link policy To speed up the Simple Pairing connection setup, the support for the default link policy has been enabled. This is in contrast to settings the link policy on every connection setup. Using the default link policy is the preferred way since there is no need to dynamically change it for every connection. For backward compatibility reason and to support old userspace the HCISETLINKPOL ioctl has been switched over to using hci_request() to issue the HCI command for setting the default link policy instead of just storing it in the HCI device structure. However the hci_request() can only be issued when the device is brought up. If used on a device that is registered, but still down it will timeout and fail. This is problematic since the command is put on the TX queue and the Bluetooth core tries to submit it to hardware that is not ready yet. The timeout for these requests is 10 seconds and this causes a significant regression when setting up a new device. The userspace can perfectly handle a failure of the HCISETLINKPOL ioctl and will re-submit it later, but the 10 seconds delay causes a problem. So in case hci_request() is called on a device that is still down, just fail it with ENETDOWN to indicate what happens. Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index f5b21cb9369..278a3ace14f 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -164,6 +164,9 @@ static inline int hci_request(struct hci_dev *hdev, void (*req)(struct hci_dev * { int ret; + if (!test_bit(HCI_UP, &hdev->flags)) + return -ENETDOWN; + /* Serialize all requests */ hci_req_lock(hdev); ret = __hci_request(hdev, req, opt, timeout); From 1045b03e07d85f3545118510a587035536030c1c Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 11 Sep 2008 19:05:29 -0700 Subject: [PATCH 607/638] netlink: fix overrun in attribute iteration kmemcheck reported this: kmemcheck: Caught 16-bit read from uninitialized memory (f6c1ba30) 0500110001508abf050010000500000002017300140000006f72672e66726565 i i i i i i i i i i i i i u u u u u u u u u u u u u u u u u u u ^ Pid: 3462, comm: wpa_supplicant Not tainted (2.6.27-rc3-00054-g6397ab9-dirty #13) EIP: 0060:[] EFLAGS: 00010296 CPU: 0 EIP is at nla_parse+0x5a/0xf0 EAX: 00000008 EBX: fffffffd ECX: c06f16c0 EDX: 00000005 ESI: 00000010 EDI: f6c1ba30 EBP: f6367c6c ESP: c0a11e88 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: f781cc84 CR3: 3632f000 CR4: 000006d0 DR0: c0ead9bc DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff4ff0 DR7: 00000400 [] rtnl_setlink+0x63/0x130 [] rtnetlink_rcv_msg+0x165/0x200 [] netlink_rcv_skb+0x76/0xa0 [] rtnetlink_rcv+0x1e/0x30 [] netlink_unicast+0x281/0x290 [] netlink_sendmsg+0x1b9/0x2b0 [] sock_sendmsg+0xd2/0x100 [] sys_sendto+0xa5/0xd0 [] sys_send+0x36/0x40 [] sys_socketcall+0x1e6/0x2c0 [] sysenter_do_call+0x12/0x3f [] 0xffffffff This is the line in nla_ok(): /** * nla_ok - check if the netlink attribute fits into the remaining bytes * @nla: netlink attribute * @remaining: number of bytes remaining in attribute stream */ static inline int nla_ok(const struct nlattr *nla, int remaining) { return remaining >= sizeof(*nla) && nla->nla_len >= sizeof(*nla) && nla->nla_len <= remaining; } It turns out that remaining can become negative due to alignment in nla_next(). But GCC promotes "remaining" to unsigned in the test against sizeof(*nla) above. Therefore the test succeeds, and the nla_for_each_attr() may access memory outside the received buffer. A short example illustrating this point is here: #include main(void) { printf("%d\n", -1 >= sizeof(int)); } ...which prints "1". This patch adds a cast in front of the sizeof so that GCC will make a signed comparison and fix the illegal memory dereference. With the patch applied, there is no kmemcheck report. Signed-off-by: Vegard Nossum Acked-by: Thomas Graf Signed-off-by: David S. Miller --- include/net/netlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/netlink.h b/include/net/netlink.h index 18024b8cecb..208fe5a3854 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -702,7 +702,7 @@ static inline int nla_len(const struct nlattr *nla) */ static inline int nla_ok(const struct nlattr *nla, int remaining) { - return remaining >= sizeof(*nla) && + return remaining >= (int) sizeof(*nla) && nla->nla_len >= sizeof(*nla) && nla->nla_len <= remaining; } From 80a56ab626c70468be92e74cf3d288ffaed23fdb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 12 Sep 2008 15:13:15 -0700 Subject: [PATCH 608/638] sparc64: Fix PCI error interrupt registry on PSYCHO. We need to pass IRQF_SHARED, otherwise we get things like: IRQ handler type mismatch for IRQ 33 current handler: PSYCHO_UE Call Trace: [000000000048394c] request_irq+0xac/0x120 [00000000007c5f6c] psycho_scan_bus+0x98/0x158 [00000000007c2bc0] pcibios_init+0xdc/0x12c [0000000000426a5c] do_one_initcall+0x1c/0x160 [00000000007c0180] kernel_init+0x9c/0xfc [0000000000427050] kernel_thread+0x30/0x60 [00000000006ae1d0] rest_init+0x10/0x60 on e3500 and similar systems. On a single board, the UE interrupts of two Psycho nodes are funneled through the same interrupt, from of_debug=3 dump: /pci@b,4000: direct translate 2ee --> 21 ... /pci@b,2000: direct translate 2ee --> 21 Decimal "33" mentioned above is the hex "21" mentioned here. Thanks to Meelis Roos for dumps and testing. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_psycho.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index ef5fe29202c..e205ade69cf 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -744,16 +744,16 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm) * the second will just error out since we do not pass in * IRQF_SHARED. */ - err = request_irq(op->irqs[1], psycho_ue_intr, 0, + err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED, "PSYCHO_UE", pbm); - err = request_irq(op->irqs[2], psycho_ce_intr, 0, + err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED, "PSYCHO_CE", pbm); /* This one, however, ought not to fail. We can just warn * about it since the system can still operate properly even * if this fails. */ - err = request_irq(op->irqs[0], psycho_pcierr_intr, 0, + err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED, "PSYCHO_PCIERR", pbm); if (err) printk(KERN_WARNING "%s: Could not register PCIERR, " From 7d4ee289d139d27b619c08c9809e7b1088c100aa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 12 Sep 2008 15:01:31 -0700 Subject: [PATCH 609/638] sparc: Fix user_regset 'n' field values. As noticed by Russell King, we were not setting this properly to the number of entries, but rather the total size. This results in the core dumping code allocating waayyyy too much memory. Signed-off-by: David S. Miller --- arch/sparc/kernel/ptrace.c | 4 ++-- arch/sparc64/kernel/ptrace.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c index 20699c70141..8ce6285a06d 100644 --- a/arch/sparc/kernel/ptrace.c +++ b/arch/sparc/kernel/ptrace.c @@ -288,7 +288,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 38 * sizeof(u32), + .n = 38, .size = sizeof(u32), .align = sizeof(u32), .get = genregs32_get, .set = genregs32_set }, @@ -304,7 +304,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 99 * sizeof(u32), + .n = 99, .size = sizeof(u32), .align = sizeof(u32), .get = fpregs32_get, .set = fpregs32_set }, diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c index bd578cc4856..10306e476e3 100644 --- a/arch/sparc64/kernel/ptrace.c +++ b/arch/sparc64/kernel/ptrace.c @@ -443,7 +443,7 @@ static const struct user_regset sparc64_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 36 * sizeof(u64), + .n = 36, .size = sizeof(u64), .align = sizeof(u64), .get = genregs64_get, .set = genregs64_set }, @@ -455,7 +455,7 @@ static const struct user_regset sparc64_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 35 * sizeof(u64), + .n = 35, .size = sizeof(u64), .align = sizeof(u64), .get = fpregs64_get, .set = fpregs64_set }, @@ -801,7 +801,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_GENERAL] = { .core_note_type = NT_PRSTATUS, - .n = 38 * sizeof(u32), + .n = 38, .size = sizeof(u32), .align = sizeof(u32), .get = genregs32_get, .set = genregs32_set }, @@ -817,7 +817,7 @@ static const struct user_regset sparc32_regsets[] = { */ [REGSET_FP] = { .core_note_type = NT_PRFPREG, - .n = 99 * sizeof(u32), + .n = 99, .size = sizeof(u32), .align = sizeof(u32), .get = fpregs32_get, .set = fpregs32_set }, From cff502a38394fd33693f6233e03fca363dfa956d Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 12 Sep 2008 16:04:26 -0700 Subject: [PATCH 610/638] niu: panic on reset The reset_task function in the niu driver does not reset the tx and rx buffers properly. This leads to panic on reset. This patch is a modified implementation of the previously posted fix. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index e4765b713ab..e3be81eba8a 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -5984,6 +5984,56 @@ static void niu_netif_start(struct niu *np) niu_enable_interrupts(np, 1); } +static void niu_reset_buffers(struct niu *np) +{ + int i, j, k, err; + + if (np->rx_rings) { + for (i = 0; i < np->num_rx_rings; i++) { + struct rx_ring_info *rp = &np->rx_rings[i]; + + for (j = 0, k = 0; j < MAX_RBR_RING_SIZE; j++) { + struct page *page; + + page = rp->rxhash[j]; + while (page) { + struct page *next = + (struct page *) page->mapping; + u64 base = page->index; + base = base >> RBR_DESCR_ADDR_SHIFT; + rp->rbr[k++] = cpu_to_le32(base); + page = next; + } + } + for (; k < MAX_RBR_RING_SIZE; k++) { + err = niu_rbr_add_page(np, rp, GFP_ATOMIC, k); + if (unlikely(err)) + break; + } + + rp->rbr_index = rp->rbr_table_size - 1; + rp->rcr_index = 0; + rp->rbr_pending = 0; + rp->rbr_refill_pending = 0; + } + } + if (np->tx_rings) { + for (i = 0; i < np->num_tx_rings; i++) { + struct tx_ring_info *rp = &np->tx_rings[i]; + + for (j = 0; j < MAX_TX_RING_SIZE; j++) { + if (rp->tx_buffs[j].skb) + (void) release_tx_packet(np, rp, j); + } + + rp->pending = MAX_TX_RING_SIZE; + rp->prod = 0; + rp->cons = 0; + rp->wrap_bit = 0; + } + } +} + static void niu_reset_task(struct work_struct *work) { struct niu *np = container_of(work, struct niu, reset_task); @@ -6006,6 +6056,12 @@ static void niu_reset_task(struct work_struct *work) niu_stop_hw(np); + spin_unlock_irqrestore(&np->lock, flags); + + niu_reset_buffers(np); + + spin_lock_irqsave(&np->lock, flags); + err = niu_init_hw(np); if (!err) { np->timer.expires = jiffies + HZ; From 395a125c6237802b19bf22b41017c99ff57f1024 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 9 Sep 2008 12:27:52 -0700 Subject: [PATCH 611/638] PCI: re-add debug prints for unmodified BARs Print out for device BAR values before the kernel tries to update them. Also make related output use KERN_DEBUG. Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 0ad936765b2..36698e57b97 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -304,6 +304,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, } else { res->start = l64; res->end = l64 + sz64; + printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n", + pci_name(dev), pos, (unsigned long long)res->start, + (unsigned long long)res->end); } } else { sz = pci_size(l, sz, mask); @@ -313,6 +316,9 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->start = l; res->end = l + sz; + printk(KERN_DEBUG "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev), + pos, (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio", + (unsigned long long)res->start, (unsigned long long)res->end); } out: @@ -383,7 +389,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->start = base; if (!res->end) res->end = limit + 0xfff; - printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", + printk(KERN_DEBUG "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), (unsigned long long) res->start, (unsigned long long) res->end); } @@ -397,8 +403,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), - (unsigned long long) res->start, (unsigned long long) res->end); + printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", + pci_name(dev), (unsigned long long) res->start, + (unsigned long long) res->end); } res = child->resource[2]; @@ -434,7 +441,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child) res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH; res->start = base; res->end = limit + 0xfffff; - printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", + printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32", (unsigned long long) res->start, (unsigned long long) res->end); } From 632480ea6548ae66e89a49ef037fd593c7a52418 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=BCrgen=20Schindele?= Date: Mon, 8 Sep 2008 22:06:29 +0100 Subject: [PATCH 612/638] [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia Fix warning when compiling "drivers/pcmcia/soc-common.c" The return value of the function "device_create_file" was not used / assigned. Signed-off-by: Jrgen Schindele Signed-off-by: Russell King --- drivers/pcmcia/soc_common.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index c48f3f69bda..da397215322 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops add_timer(&skt->poll_timer); - device_create_file(&skt->socket.dev, &dev_attr_status); + ret = device_create_file(&skt->socket.dev, &dev_attr_status); + if (ret) + goto out_err_8; } dev_set_drvdata(dev, sinfo); @@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops do { skt = &sinfo->skt[i]; + device_remove_file(&skt->socket.dev, &dev_attr_status); + out_err_8: del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); From 7bdb22c9d4b4f526b81770cd719d2f5dddf0373d Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 10 Sep 2008 10:30:37 +0100 Subject: [PATCH 613/638] [ARM] 5246/1: tosa: add proper clock alias for tc6393xb clock Add clock alias for clock that is used by tc6393xb device on tosa. As that chip plays pretty major part in tosa life and is currently disabled, this is 2.4.27 material. Signed-off-by: Dmitry Baryshkov Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5dab30eafdd..33da99fa1cc 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -50,6 +50,7 @@ #include #include "generic.h" +#include "clock.h" #include "devices.h" static unsigned long tosa_pin_config[] = { @@ -792,6 +793,8 @@ static void __init tosa_init(void) pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; + clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL); + platform_add_devices(devices, ARRAY_SIZE(devices)); } From c33de47bce74e0c890f9f830a7641371524edbc1 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 11 Sep 2008 01:28:51 +0100 Subject: [PATCH 614/638] [ARM] 5247/1: tosa: SW_EAR_IN support Signed-off-by: Dmitry Baryshkov Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/tosa.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 33da99fa1cc..9f3ef9eb32e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -522,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = { .wakeup = 1, .active_low = 1, }, + { + .type = EV_SW, + .code = SW_HEADPHONE_INSERT, + .gpio = TOSA_GPIO_EAR_IN, + .desc = "HeadPhone insert", + .active_low = 1, + .debounce_interval = 300, + }, }; static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = { From 88c381bf09d7b3f2c2e8749150087aff2c434be4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 13 Sep 2008 21:23:06 +0100 Subject: [PATCH 615/638] [ARM] Fix PCI_DMA_BUS_IS_PHYS for ARM PCI_DMA_BUS_IS_PHYS was defined to be zero, which meant we ignored the DMA mask for IDE and SCSI transfers. This is wrong - we have no DMA translation hardware. We want to obey DMA masks so that the block layer performs bouncing itself. Reported-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/include/asm/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 721c03d53f4..918d0cbbf06 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) * The networking and block device layers use this boolean for bounce * buffer decisions. */ -#define PCI_DMA_BUS_IS_PHYS (0) +#define PCI_DMA_BUS_IS_PHYS (1) /* * Whether pci_unmap_{single,page} is a nop depends upon the From da3ceb2288d0b50373b69d57a81c34fdd7cd11aa Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 8 Sep 2008 09:31:39 -0700 Subject: [PATCH 616/638] ata: duplicate variable sparse warning drivers/ata/ata_piix.c:1502:7: warning: symbol 'rc' shadows an earlier one Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b1d08a8f500..e6b4606e36b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1499,7 +1499,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, * off. */ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) { - int rc = piix_disable_ahci(pdev); + rc = piix_disable_ahci(pdev); if (rc) return rc; } From 99580664aa83ca04bb52988d504a4195b41833b0 Mon Sep 17 00:00:00 2001 From: Bob Stewart Date: Thu, 11 Sep 2008 11:50:03 +0200 Subject: [PATCH 617/638] sata_inic162x: enable LED blinking Enable LED blinking. Signed-off-by: Bob Stewart Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_inic162x.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 3ead02fe379..5032c32fa50 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -96,6 +96,7 @@ enum { PORT_SCR = 0x20, /* HOST_CTL bits */ + HCTL_LEDEN = (1 << 3), /* enable LED operation */ HCTL_IRQOFF = (1 << 8), /* global IRQ off */ HCTL_FTHD0 = (1 << 10), /* fifo threshold 0 */ HCTL_FTHD1 = (1 << 11), /* fifo threshold 1*/ @@ -540,7 +541,7 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) void __iomem *port_base = inic_port_base(ap); /* fire up the ADMA engine */ - writew(HCTL_FTHD0, port_base + HOST_CTL); + writew(HCTL_FTHD0 | HCTL_LEDEN, port_base + HOST_CTL); writew(IDMA_CTL_GO, port_base + PORT_IDMA_CTL); writeb(0, port_base + PORT_CPB_PTQFIFO); From 97b697a11b07e2ebfa69c488132596cc5eb24119 Mon Sep 17 00:00:00 2001 From: Taisuke Yamada Date: Sat, 13 Sep 2008 16:46:15 -0400 Subject: [PATCH 618/638] [libata] LBA28/LBA48 off-by-one bug in ata.h I recently bought 3 HGST P7K500-series 500GB SATA drives and had trouble accessing the block right on the LBA28-LBA48 border. Here's how it fails (same for all 3 drives): # dd if=/dev/sdc bs=512 count=1 skip=268435455 > /dev/null dd: reading `/dev/sdc': Input/output error 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.288033 seconds, 0.0 kB/s # dmesg ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: BMDMA stat 0x25 ata1.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error) ata1.00: status: { DRDY ERR } ata1.00: error: { ABRT } ata1.00: configured for UDMA/33 ata1: EH complete ... After some investigations, it turned out this seems to be caused by misinterpretation of the ATA specification on LBA28 access. Following part is the code in question: === include/linux/ata.h === static inline int lba_28_ok(u64 block, u32 n_block) { /* check the ending block number */ return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256); } HGST drive (sometimes) fails with LBA28 access of {block = 0xfffffff, n_block = 1}, and this behavior seems to be comformant. Other drives, including other HGST drives are not that strict, through. >From the ATA specification: (http://www.t13.org/Documents/UploadedDocuments/project/d1410r3b-ATA-ATAPI-6.pdf) 8.15.29 Word (61:60): Total number of user addressable sectors This field contains a value that is one greater than the total number of user addressable sectors (see 6.2). The maximum value that shall be placed in this field is 0FFFFFFFh. So the driver shouldn't use the value of 0xfffffff for LBA28 request as this exceeds maximum user addressable sector. The logical maximum value for LBA28 is 0xffffffe. The obvious fix is to cut "- 1" part, and the patch attached just do that. I've been using the patched kernel for about a month now, and the same fix is also floating on the net for some time. So I believe this fix works reliably. Just FYI, many Windows/Intel platform users also seems to be struck by this, and HGST has issued a note pointing to Intel ICH8/9 driver. "28-bit LBA command is being used to access LBAs 29-bits in length" http://www.hitachigst.com/hddt/knowtree.nsf/cffe836ed7c12018862565b000530c74/b531b8bce8745fb78825740f00580e23 Also, *BSDs seems to have similar fix included sometime around ~2004, through I have not checked out exact portion of the code. Signed-off-by: Taisuke Yamada Signed-off-by: Jeff Garzik --- include/linux/ata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 1ce19c1ef0e..8a12d718c16 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -745,7 +745,7 @@ static inline int ata_ok(u8 status) static inline int lba_28_ok(u64 block, u32 n_block) { /* check the ending block number */ - return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256); + return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256); } static inline int lba_48_ok(u64 block, u32 n_block) From 665020c35e89a9e0643e21561e4f8f967f4f2c4b Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 13 Sep 2008 02:33:06 -0700 Subject: [PATCH 619/638] proc: more debugging for "already registered" case Print parent directory name as well. The aim is to catch non-creation of parent directory when proc_mkdir will return NULL and all subsequent registrations go directly in /proc instead of intended directory. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton [ Fixed insane printk string while at it. - Linus ] Signed-off-by: Linus Torvalds --- fs/proc/generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index bca0f81eb68..7821589a17d 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -547,8 +547,8 @@ static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp for (tmp = dir->subdir; tmp; tmp = tmp->next) if (strcmp(tmp->name, dp->name) == 0) { - printk(KERN_WARNING "proc_dir_entry '%s' already " - "registered\n", dp->name); + printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n", + dir->name, dp->name); dump_stack(); break; } From dea420ce0e2973e8ef1fd11fde6804c8d03a82ad Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Sat, 13 Sep 2008 02:33:07 -0700 Subject: [PATCH 620/638] include/linux/ioport.h: add missing macro argument for devm_release_* family akpm: these have no callers at this time, but they shall soon, so let's get them right. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Hiroshi DOYU Cc: Tony Lindgren Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ioport.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 8d3b7a9afd1..350033e8f4e 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -159,9 +159,9 @@ extern struct resource * __devm_request_region(struct device *dev, struct resource *parent, resource_size_t start, resource_size_t n, const char *name); -#define devm_release_region(start,n) \ +#define devm_release_region(dev, start, n) \ __devm_release_region(dev, &ioport_resource, (start), (n)) -#define devm_release_mem_region(start,n) \ +#define devm_release_mem_region(dev, start, n) \ __devm_release_region(dev, &iomem_resource, (start), (n)) extern void __devm_release_region(struct device *dev, struct resource *parent, From 4e74339af6a59c061cf02f1ac497766bca1de19a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 13 Sep 2008 02:33:08 -0700 Subject: [PATCH 621/638] cpuset: avoid changing cpuset's cpus when -errno returned After the patch: commit 0b2f630a28d53b5a2082a5275bc3334b10373508 Author: Miao Xie Date: Fri Jul 25 01:47:21 2008 -0700 cpusets: restructure the function update_cpumask() and update_nodemask() It might happen that 'echo 0 > /cpuset/sub/cpus' returned failure but 'cpus' has been changed, because cpus was changed before calling heap_init() which may return -ENOMEM. This patch restores the orginal behavior. Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: Paul Jackson Cc: Miao Xie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 37 +++++++++++++++---------------------- 1 file changed, 15 insertions(+), 22 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index f227bc17269..827cd9adccb 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -843,37 +843,25 @@ static void cpuset_change_cpumask(struct task_struct *tsk, /** * update_tasks_cpumask - Update the cpumasks of tasks in the cpuset. * @cs: the cpuset in which each task's cpus_allowed mask needs to be changed + * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks() * * Called with cgroup_mutex held * * The cgroup_scan_tasks() function will scan all the tasks in a cgroup, * calling callback functions for each. * - * Return 0 if successful, -errno if not. + * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0 + * if @heap != NULL. */ -static int update_tasks_cpumask(struct cpuset *cs) +static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap) { struct cgroup_scanner scan; - struct ptr_heap heap; - int retval; - - /* - * cgroup_scan_tasks() will initialize heap->gt for us. - * heap_init() is still needed here for we should not change - * cs->cpus_allowed when heap_init() fails. - */ - retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL); - if (retval) - return retval; scan.cg = cs->css.cgroup; scan.test_task = cpuset_test_cpumask; scan.process_task = cpuset_change_cpumask; - scan.heap = &heap; - retval = cgroup_scan_tasks(&scan); - - heap_free(&heap); - return retval; + scan.heap = heap; + cgroup_scan_tasks(&scan); } /** @@ -883,6 +871,7 @@ static int update_tasks_cpumask(struct cpuset *cs) */ static int update_cpumask(struct cpuset *cs, const char *buf) { + struct ptr_heap heap; struct cpuset trialcs; int retval; int is_load_balanced; @@ -917,6 +906,10 @@ static int update_cpumask(struct cpuset *cs, const char *buf) if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed)) return 0; + retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL); + if (retval) + return retval; + is_load_balanced = is_sched_load_balance(&trialcs); mutex_lock(&callback_mutex); @@ -927,9 +920,9 @@ static int update_cpumask(struct cpuset *cs, const char *buf) * Scan tasks in the cpuset, and update the cpumasks of any * that need an update. */ - retval = update_tasks_cpumask(cs); - if (retval < 0) - return retval; + update_tasks_cpumask(cs, &heap); + + heap_free(&heap); if (is_load_balanced) async_rebuild_sched_domains(); @@ -1965,7 +1958,7 @@ static void scan_for_empty_cpusets(const struct cpuset *root) nodes_empty(cp->mems_allowed)) remove_tasks_in_empty_cpuset(cp); else { - update_tasks_cpumask(cp); + update_tasks_cpumask(cp, NULL); update_tasks_nodemask(cp, &oldmems); } } From 024994310e10cd7632f43b6873558820308c1af1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Sat, 13 Sep 2008 02:33:09 -0700 Subject: [PATCH 622/638] cpuset: hotplug documentation fix If all the cpus in a cpuset are offlined, the tasks in it will be moved to the nearest ancestor with non-empty cpus. Signed-off-by: Li Zefan Acked-by: Paul Jackson Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cpusets.txt | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 1f5a924d1e5..47e568a9370 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved. There is an exception to the above. If hotplug functionality is used to remove all the CPUs that are currently assigned to a cpuset, -then the kernel will automatically update the cpus_allowed of all -tasks attached to CPUs in that cpuset to allow all CPUs. When memory -hotplug functionality for removing Memory Nodes is available, a -similar exception is expected to apply there as well. In general, -the kernel prefers to violate cpuset placement, over starving a task -that has had all its allowed CPUs or Memory Nodes taken offline. User -code should reconfigure cpusets to only refer to online CPUs and Memory -Nodes when using hotplug to add or remove such resources. +then all the tasks in that cpuset will be moved to the nearest ancestor +with non-empty cpus. But the moving of some (or all) tasks might fail if +cpuset is bound with another cgroup subsystem which has some restrictions +on task attaching. In this failing case, those tasks will stay +in the original cpuset, and the kernel will automatically update +their cpus_allowed to allow all online CPUs. When memory hotplug +functionality for removing Memory Nodes is available, a similar exception +is expected to apply there as well. In general, the kernel prefers to +violate cpuset placement, over starving a task that has had all +its allowed CPUs or Memory Nodes taken offline. There is a second exception to the above. GFP_ATOMIC requests are kernel internal allocations that must be satisfied, immediately. From b261dfea48e81636516f4fa653667097638a8a62 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Sat, 13 Sep 2008 02:33:10 -0700 Subject: [PATCH 623/638] coredump_filter: add description of bit 4 There is no description of bit 4 of coredump_filter in the documentation. This patch adds it. Signed-off-by: Hidehiro Kawai Cc: Roland McGrath Cc: Mel Gorman Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 394eb2cc1c3..f566ad9bcb7 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -2413,6 +2413,8 @@ The following 4 memory types are supported: - (bit 1) anonymous shared memory - (bit 2) file-backed private memory - (bit 3) file-backed shared memory + - (bit 4) ELF header pages in file-backed private memory areas (it is + effective only if the bit 2 is cleared) Note that MMIO pages such as frame buffer are never dumped and vDSO pages are always dumped regardless of the bitmask status. From 1558182f651798164418abf53f76786da0ea4a6f Mon Sep 17 00:00:00 2001 From: Eric Sesterhenn Date: Sat, 13 Sep 2008 02:33:12 -0700 Subject: [PATCH 624/638] bfs: fix Lockdep warning This fixes: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc5-00283-g70bb089 #68 --------------------------------------------- touch/6855 is trying to acquire lock: (&info->bfs_lock){--..}, at: [] bfs_delete_inode+0x9e/0x18c but task is already holding lock: (&info->bfs_lock){--..}, at: [] bfs_create+0x45/0x187 other info that might help us debug this: 2 locks held by touch/6855: #0: (&type->i_mutex_dir_key#5){--..}, at: [] do_filp_open+0x10b/0x62f #1: (&info->bfs_lock){--..}, at: [] bfs_create+0x45/0x187 stack backtrace: Pid: 6855, comm: touch Not tainted 2.6.27-rc5-00283-g70bb089 #68 [] validate_chain+0x458/0x9f4 [] ? trace_hardirqs_off+0xb/0xd [] __lock_acquire+0x666/0x6e0 [] lock_acquire+0x5b/0x77 [] ? bfs_delete_inode+0x9e/0x18c [] mutex_lock_nested+0xbc/0x234 [] ? bfs_delete_inode+0x9e/0x18c [] ? bfs_delete_inode+0x9e/0x18c [] bfs_delete_inode+0x9e/0x18c [] ? bfs_delete_inode+0x0/0x18c [] generic_delete_inode+0x94/0xfe [] generic_drop_inode+0x12/0x12f [] iput+0x4b/0x4e [] bfs_create+0x163/0x187 [] vfs_create+0xa6/0x114 [] do_filp_open+0x1ad/0x62f [] ? native_sched_clock+0x82/0x96 [] ? _spin_unlock+0x27/0x3c [] ? alloc_fd+0xbf/0xc9 [] ? sub_preempt_count+0x9d/0xab [] ? alloc_fd+0xbf/0xc9 [] do_sys_open+0x42/0xb8 [] ? trace_hardirqs_on_thunk+0xc/0x10 [] sys_open+0x1e/0x26 [] sysenter_do_call+0x12/0x31 ======================= The problem is that we don't unlock the bfs->lock mutex before calling iput (we do in the other cases). Signed-off-by: Eric Sesterhenn Cc: Tigran Aivazian Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/bfs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c index 87ee5ccee34..ed8feb052df 100644 --- a/fs/bfs/dir.c +++ b/fs/bfs/dir.c @@ -125,8 +125,8 @@ static int bfs_create(struct inode *dir, struct dentry *dentry, int mode, inode->i_ino); if (err) { inode_dec_link_count(inode); - iput(inode); mutex_unlock(&info->bfs_lock); + iput(inode); return err; } mutex_unlock(&info->bfs_lock); From d7a3e4959c28bccc25dd33315809ffcf40f7493e Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 13 Sep 2008 02:33:13 -0700 Subject: [PATCH 625/638] mm: ifdef Quicklists in /proc/meminfo A "Quicklists: 0 kB" line has just started appearing in /proc/meminfo, but most architectures (including x86) don't have them configured, so #ifdef it, like the highmem lines. And those architectures which do have quicklists configured are using them for page tables: so let's place it next to PageTables. Signed-off-by: Hugh Dickins Acked-by: Christoph Lameter Acked-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/proc_misc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 00f10a2dcf1..29e20c6b1f7 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -183,6 +183,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off, "SReclaimable: %8lu kB\n" "SUnreclaim: %8lu kB\n" "PageTables: %8lu kB\n" +#ifdef CONFIG_QUICKLIST + "Quicklists: %8lu kB\n" +#endif "NFS_Unstable: %8lu kB\n" "Bounce: %8lu kB\n" "WritebackTmp: %8lu kB\n" @@ -190,8 +193,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off, "Committed_AS: %8lu kB\n" "VmallocTotal: %8lu kB\n" "VmallocUsed: %8lu kB\n" - "VmallocChunk: %8lu kB\n" - "Quicklists: %8lu kB\n", + "VmallocChunk: %8lu kB\n", K(i.totalram), K(i.freeram), K(i.bufferram), @@ -216,6 +218,9 @@ static int meminfo_read_proc(char *page, char **start, off_t off, K(global_page_state(NR_SLAB_RECLAIMABLE)), K(global_page_state(NR_SLAB_UNRECLAIMABLE)), K(global_page_state(NR_PAGETABLE)), +#ifdef CONFIG_QUICKLIST + K(quicklist_total_size()), +#endif K(global_page_state(NR_UNSTABLE_NFS)), K(global_page_state(NR_BOUNCE)), K(global_page_state(NR_WRITEBACK_TEMP)), @@ -223,8 +228,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off, K(committed), (unsigned long)VMALLOC_TOTAL >> 10, vmi.used >> 10, - vmi.largest_chunk >> 10, - K(quicklist_total_size()) + vmi.largest_chunk >> 10 ); len += hugetlb_report_meminfo(page + len); From 53604dbe1371c3c4458c2d741adbd8cfd8fe8e79 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sat, 13 Sep 2008 02:33:14 -0700 Subject: [PATCH 626/638] spi_mpc83xx: fix clockrate calculation for low speed Commit a61f5345 (spi_mpc83xx clockrate fixes) broke clockrate calculation for low speeds. SPMODE_DIV16 should be set if the divider is higher than 64, not only if the divider gets clipped to 1024. Furthermore, the clipping check was off by a factor 16 as well. Signed-off-by: Peter Korsgaard Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_mpc83xx.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index 070c6219e2d..ab7ee445d8b 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -267,16 +267,13 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) cs->hw_mode |= SPMODE_LEN(bits_per_word); if ((mpc83xx_spi->spibrg / hz) > 64) { + cs->hw_mode |= SPMODE_DIV16; pm = mpc83xx_spi->spibrg / (hz * 64); if (pm > 16) { - cs->hw_mode |= SPMODE_DIV16; - pm /= 16; - if (pm > 16) { - dev_err(&spi->dev, "Requested speed is too " - "low: %d Hz. Will use %d Hz instead.\n", - hz, mpc83xx_spi->spibrg / 1024); - pm = 16; - } + dev_err(&spi->dev, "Requested speed is too " + "low: %d Hz. Will use %d Hz instead.\n", + hz, mpc83xx_spi->spibrg / 1024); + pm = 16; } } else pm = mpc83xx_spi->spibrg / (hz * 4); From aa77d96ba94326db4f50d2aa36602824dd03286a Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Sat, 13 Sep 2008 02:33:15 -0700 Subject: [PATCH 627/638] spi_mpc83xx: reject invalid transfer sizes Error out on transfer length != multiple of bytes per word with -EINVAL. Fixes a buffer overrun crash if length < bytes per word. Signed-off-by: Peter Korsgaard Acked-by: Joakim Tjernlund Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_mpc83xx.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c index ab7ee445d8b..ac0e3e4b3c5 100644 --- a/drivers/spi/spi_mpc83xx.c +++ b/drivers/spi/spi_mpc83xx.c @@ -312,11 +312,20 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t) if (t->bits_per_word) bits_per_word = t->bits_per_word; len = t->len; - if (bits_per_word > 8) + if (bits_per_word > 8) { + /* invalid length? */ + if (len & 1) + return -EINVAL; len /= 2; - if (bits_per_word > 16) + } + if (bits_per_word > 16) { + /* invalid length? */ + if (len & 1) + return -EINVAL; len /= 2; + } mpc83xx_spi->count = len; + INIT_COMPLETION(mpc83xx_spi->done); /* enable rx ints */ From 8423597d676615f3dd2d9ab36f59f147086b90b8 Mon Sep 17 00:00:00 2001 From: Ned Forrester Date: Sat, 13 Sep 2008 02:33:17 -0700 Subject: [PATCH 628/638] pxa2xx_spi: chipselect bugfixes Fixes several chipselect bugs in the pxa2xx_spi driver. These bugs are in all versions of this driver and prevent using it with chips like m25p16 flash. 1. The spi_transfer.cs_change flag is handled too early: before spi_transfer.delay_usecs applies, thus making the delay ineffective at holding chip select. 2. spi_transfer.delay_usecs is ignored on the last transfer of a message (likewise not holding chipselect long enough). 3. If spi_transfer.cs_change is set on the last transfer, the chip select is always disabled, instead of the intended meaning: optionally holding chip select enabled for the next message. Those first three bugs were fixed with a relocation of delays and chip select de-assertions. 4. If a message has the cs_change flag set on the last transfer, and had the chip select stayed enabled as requested (see 3, above), it would not have been disabled if the next message is for a different chip. Fixed by dropping chip select regardless of cs_change at end of a message, if there is no next message or if the next message is for a different chip. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by: Ned Forrester Cc: Vernon Sauder Cc: Eric Miao Signed-off-by: David Brownell Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 59 ++++++++++++++++++++++++++++++++-------- 1 file changed, 48 insertions(+), 11 deletions(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 34c7c987568..a7b9070e1b4 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -144,7 +144,6 @@ struct driver_data { size_t tx_map_len; u8 n_bytes; u32 dma_width; - int cs_change; int (*write)(struct driver_data *drv_data); int (*read)(struct driver_data *drv_data); irqreturn_t (*transfer_handler)(struct driver_data *drv_data); @@ -406,8 +405,45 @@ static void giveback(struct driver_data *drv_data) struct spi_transfer, transfer_list); + /* Delay if requested before any change in chip select */ + if (last_transfer->delay_usecs) + udelay(last_transfer->delay_usecs); + + /* Drop chip select UNLESS cs_change is true or we are returning + * a message with an error, or next message is for another chip + */ if (!last_transfer->cs_change) drv_data->cs_control(PXA2XX_CS_DEASSERT); + else { + struct spi_message *next_msg; + + /* Holding of cs was hinted, but we need to make sure + * the next message is for the same chip. Don't waste + * time with the following tests unless this was hinted. + * + * We cannot postpone this until pump_messages, because + * after calling msg->complete (below) the driver that + * sent the current message could be unloaded, which + * could invalidate the cs_control() callback... + */ + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue)) + next_msg = NULL; + else + next_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&drv_data->lock, flags); + + /* see if the next and current messages point + * to the same chip + */ + if (next_msg && next_msg->spi != msg->spi) + next_msg = NULL; + if (!next_msg || msg->state == ERROR_STATE) + drv_data->cs_control(PXA2XX_CS_DEASSERT); + } msg->state = NULL; if (msg->complete) @@ -490,10 +526,9 @@ static void dma_transfer_complete(struct driver_data *drv_data) msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); - /* Release chip select if requested, transfer delays are - * handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(PXA2XX_CS_DEASSERT); + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ /* Move to next transfer */ msg->state = next_transfer(drv_data); @@ -602,10 +637,9 @@ static void int_transfer_complete(struct driver_data *drv_data) drv_data->cur_msg->actual_length += drv_data->len - (drv_data->rx_end - drv_data->rx); - /* Release chip select if requested, transfer delays are - * handled in pump_transfers */ - if (drv_data->cs_change) - drv_data->cs_control(PXA2XX_CS_DEASSERT); + /* Transfer delays and chip select release are + * handled in pump_transfers or giveback + */ /* Move to next transfer */ drv_data->cur_msg->state = next_transfer(drv_data); @@ -840,13 +874,17 @@ static void pump_transfers(unsigned long data) return; } - /* Delay if requested at end of transfer*/ + /* Delay if requested at end of transfer before CS change */ if (message->state == RUNNING_STATE) { previous = list_entry(transfer->transfer_list.prev, struct spi_transfer, transfer_list); if (previous->delay_usecs) udelay(previous->delay_usecs); + + /* Drop chip select only if cs_change is requested */ + if (previous->cs_change) + drv_data->cs_control(PXA2XX_CS_DEASSERT); } /* Check transfer length */ @@ -878,7 +916,6 @@ static void pump_transfers(unsigned long data) drv_data->len = transfer->len & DCMD_LENGTH; drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; - drv_data->cs_change = transfer->cs_change; /* Change speed and bit per word on a per transfer */ cr0 = chip->cr0; From 7e96445533ac3f4f7964646a202ff3620602fab4 Mon Sep 17 00:00:00 2001 From: Ned Forrester Date: Sat, 13 Sep 2008 02:33:18 -0700 Subject: [PATCH 629/638] pxa2xx_spi: dma bugfixes Fixes two DMA bugs in the pxa2xx_spi driver. The first bug is in all versions of this driver; the second was introduced in the 2.6.20 kernel, and prevents using the driver with chips like m25p16 flash (which can issue large DMA reads). 1. Zero length transfers are permitted for use to insert timing, but pxa2xx_spi.c will fail if this is requested in DMA mode. Fixed by using programmed I/O (PIO) mode for such transfers. 2. Transfers larger than 8191 are not permitted in DMA mode. A test for length rejects all large transfers regardless of DMA or PIO mode. Worked around by rejecting only large transfers with DMA mapped buffers, and forcing all other transfers larger than 8191 to use PIO mode. A rate limited warning is issued for DMA transfers forced to PIO mode. This patch should apply to all kernels back to and including 2.6.20; it was test patched against 2.6.20. An additional patch would be required for older kernels, but those versions are very buggy anyway. Signed-off-by: Ned Forrester Cc: Vernon Sauder Cc: Eric Miao Signed-off-by: David Brownell Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 57 ++++++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 14 deletions(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index a7b9070e1b4..0e53354c1cf 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -47,9 +47,10 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define MAX_BUSES 3 -#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) -#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) -#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0) +#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) +#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK) +#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0) +#define MAX_DMA_LEN 8191 /* * for testing SSCR1 changes that require SSP restart, basically @@ -887,14 +888,27 @@ static void pump_transfers(unsigned long data) drv_data->cs_control(PXA2XX_CS_DEASSERT); } - /* Check transfer length */ - if (transfer->len > 8191) - { - dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer " - "length greater than 8191\n"); - message->status = -EINVAL; - giveback(drv_data); - return; + /* Check for transfers that need multiple DMA segments */ + if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + + /* reject already-mapped transfers; PIO won't always work */ + if (message->is_dma_mapped + || transfer->rx_dma || transfer->tx_dma) { + dev_err(&drv_data->pdev->dev, + "pump_transfers: mapped transfer length " + "of %lu is greater than %d\n", + transfer->len, MAX_DMA_LEN); + message->status = -EINVAL; + giveback(drv_data); + return; + } + + /* warn ... we force this to PIO mode */ + if (printk_ratelimit()) + dev_warn(&message->spi->dev, "pump_transfers: " + "DMA disabled for transfer length %ld " + "greater than %d\n", + (long)drv_data->len, MAX_DMA_LEN); } /* Setup the transfer state based on the type of transfer */ @@ -962,7 +976,7 @@ static void pump_transfers(unsigned long data) &dma_thresh)) if (printk_ratelimit()) dev_warn(&message->spi->dev, - "pump_transfer: " + "pump_transfers: " "DMA burst size reduced to " "match bits_per_word\n"); } @@ -976,8 +990,23 @@ static void pump_transfers(unsigned long data) message->state = RUNNING_STATE; - /* Try to map dma buffer and do a dma transfer if successful */ - if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) { + /* Try to map dma buffer and do a dma transfer if successful, but + * only if the length is non-zero and less than MAX_DMA_LEN. + * + * Zero-length non-descriptor DMA is illegal on PXA2xx; force use + * of PIO instead. Care is needed above because the transfer may + * have have been passed with buffers that are already dma mapped. + * A zero-length transfer in PIO mode will not try to write/read + * to/from the buffers + * + * REVISIT large transfers are exactly where we most want to be + * using DMA. If this happens much, split those transfers into + * multiple DMA segments rather than forcing PIO. + */ + drv_data->dma_mapped = 0; + if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN) + drv_data->dma_mapped = map_dma_buffers(drv_data); + if (drv_data->dma_mapped) { /* Ensure we have the correct interrupt handler */ drv_data->transfer_handler = dma_transfer; From 5bead2a0680687b9576d57c177988e8aa082b922 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Sat, 13 Sep 2008 02:33:19 -0700 Subject: [PATCH 630/638] mm: mark the correct zone as full when scanning zonelists The iterator for_each_zone_zonelist() uses a struct zoneref *z cursor when scanning zonelists to keep track of where in the zonelist it is. The zoneref that is returned corresponds to the the next zone that is to be scanned, not the current one. It was intended to be treated as an opaque list. When the page allocator is scanning a zonelist, it marks elements in the zonelist corresponding to zones that are temporarily full. As the zonelist is being updated, it uses the cursor here; if (NUMA_BUILD) zlc_mark_zone_full(zonelist, z); This is intended to prevent rescanning in the near future but the zoneref cursor does not correspond to the zone that has been found to be full. This is an easy misunderstanding to make so this patch corrects the problem by changing zoneref cursor to be the current zone being scanned instead of the next one. Signed-off-by: Mel Gorman Cc: Andy Whitcroft Cc: KAMEZAWA Hiroyuki Cc: [2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 12 ++++++------ mm/mmzone.c | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 443bc7cd8c6..428328a05fa 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -751,8 +751,9 @@ static inline int zonelist_node_idx(struct zoneref *zoneref) * * This function returns the next zone at or below a given zone index that is * within the allowed nodemask using a cursor as the starting point for the - * search. The zoneref returned is a cursor that is used as the next starting - * point for future calls to next_zones_zonelist(). + * search. The zoneref returned is a cursor that represents the current zone + * being examined. It should be advanced by one before calling + * next_zones_zonelist again. */ struct zoneref *next_zones_zonelist(struct zoneref *z, enum zone_type highest_zoneidx, @@ -768,9 +769,8 @@ struct zoneref *next_zones_zonelist(struct zoneref *z, * * This function returns the first zone at or below a given zone index that is * within the allowed nodemask. The zoneref returned is a cursor that can be - * used to iterate the zonelist with next_zones_zonelist. The cursor should - * not be used by the caller as it does not match the value of the zone - * returned. + * used to iterate the zonelist with next_zones_zonelist by advancing it by + * one before calling. */ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist, enum zone_type highest_zoneidx, @@ -795,7 +795,7 @@ static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist, #define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \ for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \ zone; \ - z = next_zones_zonelist(z, highidx, nodemask, &zone)) \ + z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \ /** * for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index diff --git a/mm/mmzone.c b/mm/mmzone.c index 486ed595ee6..16ce8b955dc 100644 --- a/mm/mmzone.c +++ b/mm/mmzone.c @@ -69,6 +69,6 @@ struct zoneref *next_zones_zonelist(struct zoneref *z, (z->zone && !zref_in_nodemask(z, nodes))) z++; - *zone = zonelist_zone(z++); + *zone = zonelist_zone(z); return z; } From 9f986a8cdf94a5855201cf67db6ffdf926bc4cd9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 13 Sep 2008 02:33:20 -0700 Subject: [PATCH 631/638] Documentation/ABI: /sys/class/gpio Provide summary ABI docs about the /sys/class/gpio files. Signed-off-by: David Brownell Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-gpio | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-gpio diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio new file mode 100644 index 00000000000..8aab8092ad3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-gpio @@ -0,0 +1,26 @@ +What: /sys/class/gpio/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Brownell +Description: + + As a Kconfig option, individual GPIO signals may be accessed from + userspace. GPIOs are only made available to userspace by an explicit + "export" operation. If a given GPIO is not claimed for use by + kernel code, it may be exported by userspace (and unexported later). + Kernel code may export it for complete or partial access. + + GPIOs are identified as they are inside the kernel, using integers in + the range 0..INT_MAX. See Documentation/gpio.txt for more information. + + /sys/class/gpio + /export ... asks the kernel to export a GPIO to userspace + /unexport ... to return a GPIO to the kernel + /gpioN ... for each exported GPIO #N + /value ... always readable, writes fail for input GPIOs + /direction ... r/w as: in, out (default low); write: high, low + /gpiochipN ... for each gpiochip; #N is its first GPIO + /base ... (r/o) same as N + /label ... (r/o) descriptive, not necessarily unique + /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1) + From ecc9a04de66e7b2d40d539cc39d5798bc46553e9 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Sat, 13 Sep 2008 02:33:21 -0700 Subject: [PATCH 632/638] MAINTAINERS: fix USB VIDEO CLASS mail list address It should be linux-uvc-devel@lists.berlios.de. Signed-off-by: Ming Lei Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 186be3ba506..0a613cb926c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4365,7 +4365,7 @@ S: Maintained USB VIDEO CLASS P: Laurent Pinchart M: laurent.pinchart@skynet.be -L: linx-uvc-devel@berlios.de +L: linux-uvc-devel@lists.berlios.de L: video4linux-list@redhat.com W: http://linux-uvc.berlios.de S: Maintained From 8275d102f8dbaa4f437f6b03b00d85bfb4e16025 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 13 Sep 2008 02:33:22 -0700 Subject: [PATCH 633/638] ia64: fix panic during `modprobe -r xpc' If you are on ia64 and you modprobe xpc then modprobe -r xpc, you immediately get a panic. xpc depends on xp which depends on gru for a symbol. That symbol is only used when we are running on UV hardware. Currently, the GRU driver detects we are not on UV hardware and does no initializing. It does not do the same check when unloading. As a result, the gru driver attempts to tear down stuff that was not setup. This is a simple two-line workaround to get us through this release. Once 2.6.28 is opened, we need to rework the symbols that xp is depending on from gru so the gru driver can properly fail to load when hardware is not available. Signed-off-by: Robin Holt Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grufile.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 23c91f5f6b6..d61cee796ef 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -445,6 +445,9 @@ static void __exit gru_exit(void) int order = get_order(sizeof(struct gru_state) * GRU_CHIPLETS_PER_BLADE); + if (!IS_UV()) + return; + for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) free_irq(IRQ_GRU + i, NULL); From 3aa04f1b07352be89960bddca4db0d5d8c09510c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sat, 13 Sep 2008 02:33:23 -0700 Subject: [PATCH 634/638] atmel_lcdfb: disable LCD and DMA engines when suspending When suspending the system with atmel_lcdfb enabled, I sometimes see this: atmel_lcdfb atmel_lcdfb.0: FIFO underflow 0x10 Which can be explained by the fact that we're not stopping the LCD controller and its DMA engine when suspending, we're just gating the clocks to them. There's another potential issue which may be harder to trigger but much more nasty: If we gate the clocks at _just_ the right moment, e.g. when the DMA engine is doing a bus transaction, we may cause the DMA engine to violate the system bus protocol and cause a lockup. Avoid these issues by shutting down the LCD controller before entering suspend (and restarting it when resuming). This prevents the underrun from happening in the first place, and prevents whatever nastiness is happening when the bus clock stops in the middle of a DMA transfer. Signed-off-by: Haavard Skinnemoen Acked-by: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 84 +++++++++++++++++++++---------------- 1 file changed, 49 insertions(+), 35 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 5a24c6411d3..75dac578104 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -208,6 +208,36 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2) return value; } +static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo) +{ + /* Turn off the LCD controller and the DMA controller */ + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); + + /* Wait for the LCDC core to become idle */ + while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) + msleep(10); + + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); +} + +static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo) +{ + atmel_lcdfb_stop_nowait(sinfo); + + /* Wait for DMA engine to become idle... */ + while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) + msleep(10); +} + +static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo) +{ + lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); + lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, + (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) + | ATMEL_LCDC_PWR); +} + static void atmel_lcdfb_update_dma(struct fb_info *info, struct fb_var_screeninfo *var) { @@ -420,26 +450,8 @@ static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo) { might_sleep(); - /* LCD power off */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); - - /* wait for the LCDC core to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) - msleep(10); - - /* DMA disable */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); - - /* wait for DMA engine to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) - msleep(10); - - /* LCD power on */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, - (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); - - /* DMA enable */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); + atmel_lcdfb_stop(sinfo); + atmel_lcdfb_start(sinfo); } /** @@ -471,14 +483,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) info->var.xres, info->var.yres, info->var.xres_virtual, info->var.yres_virtual); - /* Turn off the LCD controller and the DMA controller */ - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET); - - /* Wait for the LCDC core to become idle */ - while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) - msleep(10); - - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0); + atmel_lcdfb_stop_nowait(sinfo); if (info->var.bits_per_pixel == 1) info->fix.visual = FB_VISUAL_MONO01; @@ -583,13 +588,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY) msleep(10); - dev_dbg(info->device, " * re-enable DMA engine\n"); - /* ...and enable it with updated configuration */ - lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon); - - dev_dbg(info->device, " * re-enable LCDC core\n"); - lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, - (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); + atmel_lcdfb_start(sinfo); dev_dbg(info->device, " * DONE\n"); @@ -1032,11 +1031,20 @@ static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg) struct fb_info *info = platform_get_drvdata(pdev); struct atmel_lcdfb_info *sinfo = info->par; + /* + * We don't want to handle interrupts while the clock is + * stopped. It may take forever. + */ + lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL); + sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(0); + + atmel_lcdfb_stop(sinfo); atmel_lcdfb_stop_clock(sinfo); + return 0; } @@ -1046,9 +1054,15 @@ static int atmel_lcdfb_resume(struct platform_device *pdev) struct atmel_lcdfb_info *sinfo = info->par; atmel_lcdfb_start_clock(sinfo); + atmel_lcdfb_start(sinfo); if (sinfo->atmel_lcdfb_power_control) sinfo->atmel_lcdfb_power_control(1); lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon); + + /* Enable FIFO & DMA errors */ + lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI + | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI); + return 0; } From 42cde4309b8f2671610be049352df2f8716e8809 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 13 Sep 2008 02:33:24 -0700 Subject: [PATCH 635/638] spi_s3c24xx: fix section warning Fix the section mismatch warning generated by the incorrect naming of s3c24xx_spidrv which should be s3c24xx_spi_driver: WARNING: drivers/spi/spi_s3c24xx.o(.data+0x4): Section mismatch in reference from the variable s3c24xx_spidrv to the (unknown reference) .exit.text:(unknown) Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 98abc73c1a1..3eb414b84a9 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -430,7 +430,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev) #endif MODULE_ALIAS("platform:s3c2410-spi"); -static struct platform_driver s3c24xx_spidrv = { +static struct platform_driver s3c24xx_spi_driver = { .remove = __exit_p(s3c24xx_spi_remove), .suspend = s3c24xx_spi_suspend, .resume = s3c24xx_spi_resume, @@ -442,12 +442,12 @@ static struct platform_driver s3c24xx_spidrv = { static int __init s3c24xx_spi_init(void) { - return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe); + return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe); } static void __exit s3c24xx_spi_exit(void) { - platform_driver_unregister(&s3c24xx_spidrv); + platform_driver_unregister(&s3c24xx_spi_driver); } module_init(s3c24xx_spi_init); From 8d99f83b9478768d3a8d7d1bcd9bd182c75a0447 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 13 Sep 2008 02:33:25 -0700 Subject: [PATCH 636/638] rescan_partitions(): make device capacity errors non-fatal Herton Krzesinski reports that the error-checking changes in 04ebd4aee52b06a2c38127d9208546e5b96f3a19 ("block/ioctl.c and fs/partition/check.c: check value returned by add_partition") cause his buggy USB camera to no longer mount. "The camera is an Olympus X-840. The original issue comes from the camera itself: its format program creates a partition with an off by one error". Buggy devices happen. It is better for the kernel to warn and to proceed with the mount. Reported-by: Herton Ronaldo Krzesinski Cc: Abdel Benamrouche Cc: Jens Axboe Cc: Alan Stern Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/partitions/check.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 7d6b34e201d..ecc3330972e 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -499,9 +499,9 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) if (!size) continue; if (from + size > get_capacity(disk)) { - printk(KERN_ERR " %s: p%d exceeds device capacity\n", + printk(KERN_WARNING + "%s: p%d exceeds device capacity\n", disk->disk_name, p); - continue; } res = add_partition(disk, p, from, size, state->parts[p].flags); if (res) { From 8e82f8c34b1759ae0d80fe96101746ec51fb1ba4 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Sat, 13 Sep 2008 02:33:26 -0700 Subject: [PATCH 637/638] memstick: fix MSProHG 8-bit interface mode support - 8-bit interface mode never worked properly. The only adapter I have which supports the 8b mode (the Jmicron) had some problems with its clock wiring and they discovered it only now. We also discovered that ProHG media is more sensitive to the ordering of initialization commands. - Make the driver fall back to highest supported mode instead of always falling back to serial. The driver will attempt the switch to 8b mode for any new MSPro card, but not all of them support it. Previously, these new cards ended up in serial mode, which is not the best idea (they work fine with 4b, after all). - Edit some macros for better conformance to Sony documentation Signed-off-by: Alex Dubov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/memstick/core/memstick.c | 10 +-- drivers/memstick/core/mspro_block.c | 35 ++++++++--- drivers/memstick/host/jmb38x_ms.c | 39 ++++++++---- include/linux/memstick.h | 97 +++++++++++++++-------------- 4 files changed, 107 insertions(+), 74 deletions(-) diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index a38005008a2..cea46906408 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -185,7 +185,7 @@ static void memstick_free(struct device *dev) } static struct class memstick_host_class = { - .name = "memstick_host", + .name = "memstick_host", .dev_release = memstick_free }; @@ -264,7 +264,7 @@ EXPORT_SYMBOL(memstick_new_req); * @sg - TPC argument */ void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc, - struct scatterlist *sg) + const struct scatterlist *sg) { mrq->tpc = tpc; if (tpc & 8) @@ -294,7 +294,7 @@ EXPORT_SYMBOL(memstick_init_req_sg); * user supplied buffer. */ void memstick_init_req(struct memstick_request *mrq, unsigned char tpc, - void *buf, size_t length) + const void *buf, size_t length) { mrq->tpc = tpc; if (tpc & 8) @@ -439,7 +439,7 @@ static void memstick_check(struct work_struct *work) if (!host->card) { if (memstick_power_on(host)) goto out_power_off; - } else + } else if (host->card->stop) host->card->stop(host->card); card = memstick_alloc_card(host); @@ -458,7 +458,7 @@ static void memstick_check(struct work_struct *work) || !(host->card->check(host->card))) { device_unregister(&host->card->dev); host->card = NULL; - } else + } else if (host->card->start) host->card->start(host->card); } diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 44b1817f2f2..d2d2318dafa 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -30,6 +30,8 @@ module_param(major, int, 0644); #define MSPRO_BLOCK_SIGNATURE 0xa5c3 #define MSPRO_BLOCK_MAX_ATTRIBUTES 41 +#define MSPRO_BLOCK_PART_SHIFT 3 + enum { MSPRO_BLOCK_ID_SYSINFO = 0x10, MSPRO_BLOCK_ID_MODELNAME = 0x15, @@ -195,7 +197,7 @@ static int mspro_block_bd_open(struct inode *inode, struct file *filp) static int mspro_block_disk_release(struct gendisk *disk) { struct mspro_block_data *msb = disk->private_data; - int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT; + int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT; mutex_lock(&mspro_block_disk_lock); @@ -877,6 +879,7 @@ static int mspro_block_switch_interface(struct memstick_dev *card) struct mspro_block_data *msb = memstick_get_drvdata(card); int rc = 0; +try_again: if (msb->caps & MEMSTICK_CAP_PAR4) rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4); else @@ -930,6 +933,18 @@ static int mspro_block_switch_interface(struct memstick_dev *card) rc = memstick_set_rw_addr(card); if (!rc) rc = mspro_block_set_interface(card, msb->system); + + if (!rc) { + msleep(150); + rc = mspro_block_wait_for_ced(card); + if (rc) + return rc; + + if (msb->caps & MEMSTICK_CAP_PAR8) { + msb->caps &= ~MEMSTICK_CAP_PAR8; + goto try_again; + } + } } return rc; } @@ -1117,14 +1132,16 @@ static int mspro_block_init_card(struct memstick_dev *card) return -EIO; msb->caps = host->caps; + + msleep(150); + rc = mspro_block_wait_for_ced(card); + if (rc) + return rc; + rc = mspro_block_switch_interface(card); if (rc) return rc; - msleep(200); - rc = mspro_block_wait_for_ced(card); - if (rc) - return rc; dev_dbg(&card->dev, "card activated\n"); if (msb->system != MEMSTICK_SYS_SERIAL) msb->caps |= MEMSTICK_CAP_AUTO_GET_INT; @@ -1192,12 +1209,12 @@ static int mspro_block_init_disk(struct memstick_dev *card) if (rc) return rc; - if ((disk_id << MEMSTICK_PART_SHIFT) > 255) { + if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) { rc = -ENOSPC; goto out_release_id; } - msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT); + msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT); if (!msb->disk) { rc = -ENOMEM; goto out_release_id; @@ -1220,7 +1237,7 @@ static int mspro_block_init_disk(struct memstick_dev *card) MSPRO_BLOCK_MAX_PAGES * msb->page_size); msb->disk->major = major; - msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT; + msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT; msb->disk->fops = &ms_block_bdops; msb->usage_count = 1; msb->disk->private_data = msb; @@ -1416,7 +1433,7 @@ out_unlock: static struct memstick_device_id mspro_block_id_tbl[] = { {MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO, - MEMSTICK_CLASS_GENERIC_DUO}, + MEMSTICK_CLASS_DUO}, {} }; diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index 3485c63d20b..2fb95a5b72e 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -81,6 +81,8 @@ struct jmb38x_ms { #define TPC_CODE_SZ_MASK 0x00000700 #define TPC_DATA_SZ_MASK 0x00000007 +#define HOST_CONTROL_TDELAY_EN 0x00040000 +#define HOST_CONTROL_HW_OC_P 0x00010000 #define HOST_CONTROL_RESET_REQ 0x00008000 #define HOST_CONTROL_REI 0x00004000 #define HOST_CONTROL_LED 0x00000400 @@ -88,6 +90,7 @@ struct jmb38x_ms { #define HOST_CONTROL_RESET 0x00000100 #define HOST_CONTROL_POWER_EN 0x00000080 #define HOST_CONTROL_CLOCK_EN 0x00000040 +#define HOST_CONTROL_REO 0x00000008 #define HOST_CONTROL_IF_SHIFT 4 #define HOST_CONTROL_IF_SERIAL 0x0 @@ -133,11 +136,15 @@ struct jmb38x_ms { #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000 #define CLOCK_CONTROL_40MHZ 0x00000001 -#define CLOCK_CONTROL_50MHZ 0x00000002 +#define CLOCK_CONTROL_50MHZ 0x0000000a #define CLOCK_CONTROL_60MHZ 0x00000008 #define CLOCK_CONTROL_62_5MHZ 0x0000000c #define CLOCK_CONTROL_OFF 0x00000000 +#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0 +#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00 +#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000 + enum { CMD_READY = 0x01, FIFO_READY = 0x02, @@ -367,8 +374,7 @@ static int jmb38x_ms_issue_cmd(struct memstick_host *msh) return host->req->error; } - dev_dbg(&msh->dev, "control %08x\n", - readl(host->addr + HOST_CONTROL)); + dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL)); dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS)); dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS)); @@ -637,7 +643,7 @@ static int jmb38x_ms_reset(struct jmb38x_ms_host *host) ndelay(20); } dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n"); - return -EIO; + /* return -EIO; */ reset_next: writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN @@ -680,7 +686,9 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, host_ctl = 7; host_ctl |= HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN; + | HOST_CONTROL_CLOCK_EN + | HOST_CONTROL_HW_OC_P + | HOST_CONTROL_TDELAY_EN; writel(host_ctl, host->addr + HOST_CONTROL); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 @@ -704,33 +712,40 @@ static int jmb38x_ms_set_param(struct memstick_host *msh, break; case MEMSTICK_INTERFACE: host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); + pci_read_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + &clock_delay); + clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B + : ~PCI_CTL_CLOCK_DLY_MASK_A; if (value == MEMSTICK_SERIAL) { host_ctl &= ~HOST_CONTROL_FAST_CLK; + host_ctl &= ~HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_SERIAL << HOST_CONTROL_IF_SHIFT; host_ctl |= HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 0; } else if (value == MEMSTICK_PAR4) { - host_ctl |= HOST_CONTROL_FAST_CLK; + host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO; host_ctl |= HOST_CONTROL_IF_PAR4 << HOST_CONTROL_IF_SHIFT; host_ctl &= ~HOST_CONTROL_REI; clock_ctl = CLOCK_CONTROL_40MHZ; - clock_delay = 4; + clock_delay |= host->id ? (4 << 12) : (4 << 8); } else if (value == MEMSTICK_PAR8) { host_ctl |= HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_PAR8 << HOST_CONTROL_IF_SHIFT; - host_ctl &= ~HOST_CONTROL_REI; - clock_ctl = CLOCK_CONTROL_60MHZ; - clock_delay = 0; + host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO); + clock_ctl = CLOCK_CONTROL_50MHZ; } else return -EINVAL; + writel(host_ctl, host->addr + HOST_CONTROL); writel(clock_ctl, host->addr + CLOCK_CONTROL); - writel(clock_delay, host->addr + CLOCK_DELAY); + pci_write_config_dword(host->chip->pdev, + PCI_CTL_CLOCK_DLY_ADDR, + clock_delay); break; }; return 0; diff --git a/include/linux/memstick.h b/include/linux/memstick.h index a9f998a3f48..d0c37e68223 100644 --- a/include/linux/memstick.h +++ b/include/linux/memstick.h @@ -21,30 +21,30 @@ struct ms_status_register { unsigned char reserved; unsigned char interrupt; -#define MEMSTICK_INT_CMDNAK 0x0001 -#define MEMSTICK_INT_IOREQ 0x0008 -#define MEMSTICK_INT_IOBREQ 0x0010 -#define MEMSTICK_INT_BREQ 0x0020 -#define MEMSTICK_INT_ERR 0x0040 -#define MEMSTICK_INT_CED 0x0080 +#define MEMSTICK_INT_CMDNAK 0x01 +#define MEMSTICK_INT_IOREQ 0x08 +#define MEMSTICK_INT_IOBREQ 0x10 +#define MEMSTICK_INT_BREQ 0x20 +#define MEMSTICK_INT_ERR 0x40 +#define MEMSTICK_INT_CED 0x80 unsigned char status0; -#define MEMSTICK_STATUS0_WP 0x0001 -#define MEMSTICK_STATUS0_SL 0x0002 -#define MEMSTICK_STATUS0_BF 0x0010 -#define MEMSTICK_STATUS0_BE 0x0020 -#define MEMSTICK_STATUS0_FB0 0x0040 -#define MEMSTICK_STATUS0_MB 0x0080 +#define MEMSTICK_STATUS0_WP 0x01 +#define MEMSTICK_STATUS0_SL 0x02 +#define MEMSTICK_STATUS0_BF 0x10 +#define MEMSTICK_STATUS0_BE 0x20 +#define MEMSTICK_STATUS0_FB0 0x40 +#define MEMSTICK_STATUS0_MB 0x80 unsigned char status1; -#define MEMSTICK_STATUS1_UCFG 0x0001 -#define MEMSTICK_STATUS1_FGER 0x0002 -#define MEMSTICK_STATUS1_UCEX 0x0004 -#define MEMSTICK_STATUS1_EXER 0x0008 -#define MEMSTICK_STATUS1_UCDT 0x0010 -#define MEMSTICK_STATUS1_DTER 0x0020 -#define MEMSTICK_STATUS1_FBI 0x0040 -#define MEMSTICK_STATUS1_MB 0x0080 +#define MEMSTICK_STATUS1_UCFG 0x01 +#define MEMSTICK_STATUS1_FGER 0x02 +#define MEMSTICK_STATUS1_UCEX 0x04 +#define MEMSTICK_STATUS1_EXER 0x08 +#define MEMSTICK_STATUS1_UCDT 0x10 +#define MEMSTICK_STATUS1_DTER 0x20 +#define MEMSTICK_STATUS1_FB1 0x40 +#define MEMSTICK_STATUS1_MB 0x80 } __attribute__((packed)); struct ms_id_register { @@ -56,32 +56,32 @@ struct ms_id_register { struct ms_param_register { unsigned char system; -#define MEMSTICK_SYS_ATEN 0xc0 -#define MEMSTICK_SYS_BAMD 0x80 #define MEMSTICK_SYS_PAM 0x08 +#define MEMSTICK_SYS_BAMD 0x80 unsigned char block_address_msb; unsigned short block_address; unsigned char cp; -#define MEMSTICK_CP_BLOCK 0x0000 -#define MEMSTICK_CP_PAGE 0x0020 -#define MEMSTICK_CP_EXTRA 0x0040 -#define MEMSTICK_CP_OVERWRITE 0x0080 +#define MEMSTICK_CP_BLOCK 0x00 +#define MEMSTICK_CP_PAGE 0x20 +#define MEMSTICK_CP_EXTRA 0x40 +#define MEMSTICK_CP_OVERWRITE 0x80 unsigned char page_address; } __attribute__((packed)); struct ms_extra_data_register { unsigned char overwrite_flag; -#define MEMSTICK_OVERWRITE_UPDATA 0x0010 -#define MEMSTICK_OVERWRITE_PAGE 0x0060 -#define MEMSTICK_OVERWRITE_BLOCK 0x0080 +#define MEMSTICK_OVERWRITE_UDST 0x10 +#define MEMSTICK_OVERWRITE_PGST1 0x20 +#define MEMSTICK_OVERWRITE_PGST0 0x40 +#define MEMSTICK_OVERWRITE_BKST 0x80 unsigned char management_flag; -#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004 -#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008 -#define MEMSTICK_MANAGEMENT_COPY 0x0010 -#define MEMSTICK_MANAGEMENT_ACCESS 0x0020 +#define MEMSTICK_MANAGEMENT_SYSFLG 0x04 +#define MEMSTICK_MANAGEMENT_ATFLG 0x08 +#define MEMSTICK_MANAGEMENT_SCMS1 0x10 +#define MEMSTICK_MANAGEMENT_SCMS0 0x20 unsigned short logical_address; } __attribute__((packed)); @@ -96,9 +96,9 @@ struct ms_register { struct mspro_param_register { unsigned char system; -#define MEMSTICK_SYS_SERIAL 0x80 #define MEMSTICK_SYS_PAR4 0x00 #define MEMSTICK_SYS_PAR8 0x40 +#define MEMSTICK_SYS_SERIAL 0x80 unsigned short data_count; unsigned int data_address; @@ -147,7 +147,7 @@ struct ms_register_addr { unsigned char w_length; } __attribute__((packed)); -enum { +enum memstick_tpc { MS_TPC_READ_MG_STATUS = 0x01, MS_TPC_READ_LONG_DATA = 0x02, MS_TPC_READ_SHORT_DATA = 0x03, @@ -167,7 +167,7 @@ enum { MS_TPC_SET_CMD = 0x0e }; -enum { +enum memstick_command { MS_CMD_BLOCK_END = 0x33, MS_CMD_RESET = 0x3c, MS_CMD_BLOCK_WRITE = 0x55, @@ -201,8 +201,6 @@ enum { /*** Driver structures and functions ***/ -#define MEMSTICK_PART_SHIFT 3 - enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE }; #define MEMSTICK_POWER_OFF 0 @@ -215,24 +213,27 @@ enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE }; struct memstick_host; struct memstick_driver; +struct memstick_device_id { + unsigned char match_flags; #define MEMSTICK_MATCH_ALL 0x01 + unsigned char type; #define MEMSTICK_TYPE_LEGACY 0xff #define MEMSTICK_TYPE_DUO 0x00 #define MEMSTICK_TYPE_PRO 0x01 + unsigned char category; #define MEMSTICK_CATEGORY_STORAGE 0xff #define MEMSTICK_CATEGORY_STORAGE_DUO 0x00 +#define MEMSTICK_CATEGORY_IO 0x01 +#define MEMSTICK_CATEGORY_IO_PRO 0x10 -#define MEMSTICK_CLASS_GENERIC 0xff -#define MEMSTICK_CLASS_GENERIC_DUO 0x00 - - -struct memstick_device_id { - unsigned char match_flags; - unsigned char type; - unsigned char category; unsigned char class; +#define MEMSTICK_CLASS_FLASH 0xff +#define MEMSTICK_CLASS_DUO 0x00 +#define MEMSTICK_CLASS_ROM 0x01 +#define MEMSTICK_CLASS_RO 0x02 +#define MEMSTICK_CLASS_WP 0x03 }; struct memstick_request { @@ -319,9 +320,9 @@ void memstick_suspend_host(struct memstick_host *host); void memstick_resume_host(struct memstick_host *host); void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc, - struct scatterlist *sg); + const struct scatterlist *sg); void memstick_init_req(struct memstick_request *mrq, unsigned char tpc, - void *buf, size_t length); + const void *buf, size_t length); int memstick_next_req(struct memstick_host *host, struct memstick_request **mrq); void memstick_new_req(struct memstick_host *host); From f948cc6ab9e61a8e88d70ee9aafc690e6d26f92c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Sep 2008 09:53:42 -0700 Subject: [PATCH 638/638] sparc64: Fix OOPS in psycho_pcierr_intr_other(). We no longer put the top-level PCI controller device into the PCI layer device list. So pbm->pci_bus->self is always NULL. Therefore, use direct PCI config space accesses to get at the PCI controller's PCI_STATUS register. Tested by Meelis Roos. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_psycho.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index e205ade69cf..f85b6bebb0b 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -575,7 +575,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm { unsigned long csr_reg, csr, csr_error_bits; irqreturn_t ret = IRQ_NONE; - u16 stat; + u16 stat, *addr; if (is_pbm_a) { csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL; @@ -597,7 +597,9 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm printk("%s: PCI SERR signal asserted.\n", pbm->name); ret = IRQ_HANDLED; } - pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat); + addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno, + 0, PCI_STATUS); + pci_config_read16(addr, &stat); if (stat & (PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_REC_TARGET_ABORT | @@ -605,7 +607,7 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm PCI_STATUS_SIG_SYSTEM_ERROR)) { printk("%s: PCI bus error, PCI_STATUS[%04x]\n", pbm->name, stat); - pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff); + pci_config_write16(addr, 0xffff); ret = IRQ_HANDLED; } return ret;