joel16/android_kernel_sony_msm8994_rework
1
0
Fork 0
mirror of https://github.com/joel16/android_kernel_sony_msm8994_rework.git synced 2024-12-28 15:24:58 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Browse Source 
Conflicts:
	drivers/firmware/iscsi_ibft.c
This commit is contained in:
David S. Miller 2010-02-28 19:23:06 -08:00
commit 47871889c6
2090 changed files with 104065 additions and 45054 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

79
Documentation/ABI/testing/sysfs-devices-power Normal file
View File

@ -0,0 +1,79 @@
What: /sys/devices/.../power/
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../power directory contains attributes
allowing the user space to check and modify some power
management related properties of given device.
What: /sys/devices/.../power/wakeup
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../power/wakeup attribute allows the user
space to check if the device is enabled to wake up the system
from sleep states, such as the memory sleep state (suspend to
RAM) and hibernation (suspend to disk), and to enable or disable
it to do that as desired.
Some devices support "wakeup" events, which are hardware signals
used to activate the system from a sleep state. Such devices
have one of the following two values for the sysfs power/wakeup
file:
+ "enabled\n" to issue the events;
+ "disabled\n" not to do so;
In that cases the user space can change the setting represented
by the contents of this file by writing either "enabled", or
"disabled" to it.
For the devices that are not capable of generating system wakeup
events this file contains "\n". In that cases the user space
cannot modify the contents of this file and the device cannot be
enabled to wake up the system.
What: /sys/devices/.../power/control
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../power/control attribute allows the user
space to control the run-time power management of the device.
All devices have one of the following two values for the
power/control file:
+ "auto\n" to allow the device to be power managed at run time;
+ "on\n" to prevent the device from being power managed;
The default for all devices is "auto", which means that they may
be subject to automatic power management, depending on their
drivers. Changing this attribute to "on" prevents the driver
from power managing the device at run time. Doing that while
the device is suspended causes it to be woken up.
What: /sys/devices/.../power/async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/devices/.../async attribute allows the user space to
enable or diasble the device's suspend and resume callbacks to
be executed asynchronously (ie. in separate threads, in parallel
with the main suspend/resume thread) during system-wide power
transitions (eg. suspend to RAM, hibernation).
All devices have one of the following two values for the
power/async file:
+ "enabled\n" to permit the asynchronous suspend/resume;
+ "disabled\n" to forbid it;
The value of this attribute may be changed by writing either
"enabled", or "disabled" to it.
It generally is unsafe to permit the asynchronous suspend/resume
of a device unless it is certain that all of the PM dependencies
of the device are known to the PM core. However, for some
devices this attribute is set to "enabled" by bus type code or
device drivers and in that cases it should be safe to leave the
default value.

13
Documentation/ABI/testing/sysfs-power
View File

@ -101,3 +101,16 @@ Description:
CAUTION: Using it will cause your machine's real-time (CMOS)
clock to be set to a random invalid time after a resume.
What: /sys/power/pm_async
Date: January 2009
Contact: Rafael J. Wysocki <rjw@sisk.pl>
Description:
The /sys/power/pm_async file controls the switch allowing the
user space to enable or disable asynchronous suspend and resume
of devices. If enabled, this feature will cause some device
drivers' suspend and resume callbacks to be executed in parallel
with each other and with the main suspend thread. It is enabled
if this file contains "1", which is the default. It may be
disabled by writing "0" to this file, in which case all devices
will be suspended and resumed synchronously.

3
Documentation/DocBook/v4l/io.xml
View File

@ -589,7 +589,8 @@ number of a video input as in &v4l2-input; field
<entry></entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types
<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry>
<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
should set this to 0.</entry>
</row>
</tbody>
</tgroup>

40
Documentation/DocBook/v4l/vidioc-qbuf.xml
View File

@ -54,12 +54,10 @@ to enqueue an empty (capturing) or filled (output) buffer in the
driver's incoming queue. The semantics depend on the selected I/O
method.</para>
<para>To enqueue a <link linkend="mmap">memory mapped</link>
buffer applications set the <structfield>type</structfield> field of a
&v4l2-buffer; to the same buffer type as previously &v4l2-format;
<structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, the <structfield>memory</structfield>
field to <constant>V4L2_MEMORY_MMAP</constant> and the
<para>To enqueue a buffer applications set the <structfield>type</structfield>
field of a &v4l2-buffer; to the same buffer type as was previously used
with &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>. Applications must also set the
<structfield>index</structfield> field. Valid index numbers range from
zero to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The
@ -70,8 +68,19 @@ intended for output (<structfield>type</structfield> is
<constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also
initialize the <structfield>bytesused</structfield>,
<structfield>field</structfield> and
<structfield>timestamp</structfield> fields. See <xref
linkend="buffer" /> for details. When
<structfield>timestamp</structfield> fields, see <xref
linkend="buffer" /> for details.
Applications must also set <structfield>flags</structfield> to 0. If a driver
supports capturing from specific video inputs and you want to specify a video
input, then <structfield>flags</structfield> should be set to
<constant>V4L2_BUF_FLAG_INPUT</constant> and the field
<structfield>input</structfield> must be initialized to the desired input.
The <structfield>reserved</structfield> field must be set to 0.
</para>
<para>To enqueue a <link linkend="mmap">memory mapped</link>
buffer applications set the <structfield>memory</structfield>
field to <constant>V4L2_MEMORY_MMAP</constant>. When
<constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the
<constant>V4L2_BUF_FLAG_MAPPED</constant> and
@ -81,14 +90,10 @@ structure the driver sets the
&EINVAL;.</para>
<para>To enqueue a <link linkend="userp">user pointer</link>
buffer applications set the <structfield>type</structfield> field of a
&v4l2-buffer; to the same buffer type as previously &v4l2-format;
<structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, the <structfield>memory</structfield>
field to <constant>V4L2_MEMORY_USERPTR</constant> and the
buffer applications set the <structfield>memory</structfield>
field to <constant>V4L2_MEMORY_USERPTR</constant>, the
<structfield>m.userptr</structfield> field to the address of the
buffer and <structfield>length</structfield> to its size. When the
buffer is intended for output additional fields must be set as above.
buffer and <structfield>length</structfield> to its size.
When <constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant>
flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
@ -96,13 +101,14 @@ flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
<structfield>flags</structfield> field, or it returns an error code.
This ioctl locks the memory pages of the buffer in physical memory,
they cannot be swapped out to disk. Buffers remain locked until
dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are
dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
called, or until the device is closed.</para>
<para>Applications call the <constant>VIDIOC_DQBUF</constant>
ioctl to dequeue a filled (capturing) or displayed (output) buffer
from the driver's outgoing queue. They just set the
<structfield>type</structfield> and <structfield>memory</structfield>
<structfield>type</structfield>, <structfield>memory</structfield>
and <structfield>reserved</structfield>
fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant>
is called with a pointer to this structure the driver fills the
remaining fields or returns an error code.</para>

7
Documentation/DocBook/v4l/vidioc-querybuf.xml
View File

@ -54,12 +54,13 @@ buffer at any time after buffers have been allocated with the
&VIDIOC-REQBUFS; ioctl.</para>
<para>Applications set the <structfield>type</structfield> field
of a &v4l2-buffer; to the same buffer type as previously
of a &v4l2-buffer; to the same buffer type as was previously used with
&v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, and the <structfield>index</structfield>
field. Valid index numbers range from zero
to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one.
The <structfield>reserved</structfield> field should to set to 0.
After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to
this structure drivers return an error code or fill the rest of
the structure.</para>
@ -68,8 +69,8 @@ the structure.</para>
<constant>V4L2_BUF_FLAG_MAPPED</constant>,
<constant>V4L2_BUF_FLAG_QUEUED</constant> and
<constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The
<structfield>memory</structfield> field will be set to
<constant>V4L2_MEMORY_MMAP</constant>, the <structfield>m.offset</structfield>
<structfield>memory</structfield> field will be set to the current
I/O method, the <structfield>m.offset</structfield>
contains the offset of the buffer from the start of the device memory,
the <structfield>length</structfield> field its size. The driver may
or may not set the remaining fields and flags, they are meaningless in

36
Documentation/DocBook/v4l/vidioc-reqbufs.xml
View File

@ -54,23 +54,23 @@ I/O. Memory mapped buffers are located in device memory and must be
allocated with this ioctl before they can be mapped into the
application's address space. User buffers are allocated by
applications themselves, and this ioctl is merely used to switch the
driver into user pointer I/O mode.</para>
driver into user pointer I/O mode and to setup some internal structures.</para>
<para>To allocate device buffers applications initialize three
fields of a <structname>v4l2_requestbuffers</structname> structure.
<para>To allocate device buffers applications initialize all
fields of the <structname>v4l2_requestbuffers</structname> structure.
They set the <structfield>type</structfield> field to the respective
stream or buffer type, the <structfield>count</structfield> field to
the desired number of buffers, and <structfield>memory</structfield>
must be set to <constant>V4L2_MEMORY_MMAP</constant>. When the ioctl
is called with a pointer to this structure the driver attempts to
allocate the requested number of buffers and stores the actual number
the desired number of buffers, <structfield>memory</structfield>
must be set to the requested I/O method and the reserved array
must be zeroed. When the ioctl
is called with a pointer to this structure the driver will attempt to allocate
the requested number of buffers and it stores the actual number
allocated in the <structfield>count</structfield> field. It can be
smaller than the number requested, even zero, when the driver runs out
of free memory. A larger number is possible when the driver requires
more buffers to function correctly.<footnote>
<para>For example video output requires at least two buffers,
of free memory. A larger number is also possible when the driver requires
more buffers to function correctly. For example video output requires at least two buffers,
one displayed and one filled by the application.</para>
</footnote> When memory mapping I/O is not supported the ioctl
<para>When the I/O method is not supported the ioctl
returns an &EINVAL;.</para>
<para>Applications can call <constant>VIDIOC_REQBUFS</constant>
@ -81,14 +81,6 @@ in progress, an implicit &VIDIOC-STREAMOFF;. <!-- mhs: I see no
reason why munmap()ping one or even all buffers must imply
streamoff.--></para>
<para>To negotiate user pointer I/O, applications initialize only
the <structfield>type</structfield> field and set
<structfield>memory</structfield> to
<constant>V4L2_MEMORY_USERPTR</constant>. When the ioctl is called
with a pointer to this structure the driver prepares for user pointer
I/O, when this I/O method is not supported the ioctl returns an
&EINVAL;.</para>
<table pgwide="1" frame="none" id="v4l2-requestbuffers">
<title>struct <structname>v4l2_requestbuffers</structname></title>
<tgroup cols="3">
@ -97,9 +89,7 @@ I/O, when this I/O method is not supported the ioctl returns an
<row>
<entry>__u32</entry>
<entry><structfield>count</structfield></entry>
<entry>The number of buffers requested or granted. This
field is only used when <structfield>memory</structfield> is set to
<constant>V4L2_MEMORY_MMAP</constant>.</entry>
<entry>The number of buffers requested or granted.</entry>
</row>
<row>
<entry>&v4l2-buf-type;</entry>
@ -120,7 +110,7 @@ as the &v4l2-format; <structfield>type</structfield> field. See <xref
<entry><structfield>reserved</structfield>[2]</entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types <constant>V4L2_BUF_TYPE_PRIVATE</constant> and
higher.</entry>
higher. This array should be zeroed by applications.</entry>
</row>
</tbody>
</tgroup>

10
Documentation/RCU/00-INDEX
View File

@ -6,16 +6,22 @@ checklist.txt
- Review Checklist for RCU Patches
listRCU.txt
- Using RCU to Protect Read-Mostly Linked Lists
lockdep.txt
- RCU and lockdep checking
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
rcubarrier.txt
- RCU and Unloadable Modules
rculist_nulls.txt
- RCU list primitives for use with SLAB_DESTROY_BY_RCU
rcuref.txt
- Reference-count design for elements of lists/arrays protected by RCU
rcu.txt
- RCU Concepts
rcubarrier.txt
- Unloading modules that use RCU callbacks
RTFP.txt
- List of RCU papers (bibliography) going back to 1980.
stallwarn.txt
- RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
torture.txt
- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
trace.txt

61
Documentation/RCU/RTFP.txt
View File

@ -25,10 +25,10 @@ to be referencing the data structure. However, this mechanism was not
optimized for modern computer systems, which is not surprising given
that these overheads were not so expensive in the mid-80s. Nonetheless,
passive serialization appears to be the first deferred-destruction
mechanism to be used in production. Furthermore, the relevant patent has
lapsed, so this approach may be used in non-GPL software, if desired.
(In contrast, use of RCU is permitted only in software licensed under
GPL. Sorry!!!)
mechanism to be used in production. Furthermore, the relevant patent
has lapsed, so this approach may be used in non-GPL software, if desired.
(In contrast, implementation of RCU is permitted only in software licensed
under either GPL or LGPL. Sorry!!!)
In 1990, Pugh [Pugh90] noted that explicitly tracking which threads
were reading a given data structure permitted deferred free to operate
@ -150,6 +150,18 @@ preemptible RCU [PaulEMcKenney2007PreemptibleRCU], and the three-part
LWN "What is RCU?" series [PaulEMcKenney2007WhatIsRCUFundamentally,
PaulEMcKenney2008WhatIsRCUUsage, and PaulEMcKenney2008WhatIsRCUAPI].
2008 saw a journal paper on real-time RCU [DinakarGuniguntala2008IBMSysJ],
a history of how Linux changed RCU more than RCU changed Linux
[PaulEMcKenney2008RCUOSR], and a design overview of hierarchical RCU
[PaulEMcKenney2008HierarchicalRCU].
2009 introduced user-level RCU algorithms [PaulEMcKenney2009MaliciousURCU],
which Mathieu Desnoyers is now maintaining [MathieuDesnoyers2009URCU]
[MathieuDesnoyersPhD]. TINY_RCU [PaulEMcKenney2009BloatWatchRCU] made
its appearance, as did expedited RCU [PaulEMcKenney2009expeditedRCU].
The problem of resizeable RCU-protected hash tables may now be on a path
to a solution [JoshTriplett2009RPHash].
Bibtex Entries
@article{Kung80
@ -730,6 +742,11 @@ Revised:
"
}
#
# "What is RCU?" LWN series.
#
########################################################################
@article{DinakarGuniguntala2008IBMSysJ
,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole"
,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}"
@ -820,3 +837,39 @@ Revised:
Uniprocessor assumptions allow simplified RCU implementation.
"
}
@unpublished{PaulEMcKenney2009expeditedRCU
,Author="Paul E. McKenney"
,Title="[{PATCH} -tip 0/3] expedited 'big hammer' {RCU} grace periods"
,month="June"
,day="25"
,year="2009"
,note="Available:
\url{http://lkml.org/lkml/2009/6/25/306}
[Viewed August 16, 2009]"
,annotation="
First posting of expedited RCU to be accepted into -tip.
"
}
@unpublished{JoshTriplett2009RPHash
,Author="Josh Triplett"
,Title="Scalable concurrent hash tables via relativistic programming"
,month="September"
,year="2009"
,note="Linux Plumbers Conference presentation"
,annotation="
RP fun with hash tables.
"
}
@phdthesis{MathieuDesnoyersPhD
, title = "Low-Impact Operating System Tracing"
, author = "Mathieu Desnoyers"
, school = "Ecole Polytechnique de Montr\'{e}al"
, month = "December"
, year = 2009
,note="Available:
\url{http://www.lttng.org/pub/thesis/desnoyers-dissertation-2009-12.pdf}
[Viewed December 9, 2009]"
}

204
Documentation/RCU/checklist.txt
View File

@ -8,13 +8,12 @@ would cause. This list is based on experiences reviewing such patches
over a rather long period of time, but improvements are always welcome!
0. Is RCU being applied to a read-mostly situation? If the data
structure is updated more than about 10% of the time, then
you should strongly consider some other approach, unless
detailed performance measurements show that RCU is nonetheless
the right tool for the job. Yes, you might think of RCU
as simply cutting overhead off of the readers and imposing it
on the writers. That is exactly why normal uses of RCU will
do much more reading than updating.
structure is updated more than about 10% of the time, then you
should strongly consider some other approach, unless detailed
performance measurements show that RCU is nonetheless the right
tool for the job. Yes, RCU does reduce read-side overhead by
increasing write-side overhead, which is exactly why normal uses
of RCU will do much more reading than updating.
Another exception is where performance is not an issue, and RCU
provides a simpler implementation. An example of this situation
@ -35,13 +34,13 @@ over a rather long period of time, but improvements are always welcome!
If you choose #b, be prepared to describe how you have handled
memory barriers on weakly ordered machines (pretty much all of
them -- even x86 allows reads to be reordered), and be prepared
to explain why this added complexity is worthwhile. If you
choose #c, be prepared to explain how this single task does not
become a major bottleneck on big multiprocessor machines (for
example, if the task is updating information relating to itself
that other tasks can read, there by definition can be no
bottleneck).
them -- even x86 allows later loads to be reordered to precede
earlier stores), and be prepared to explain why this added
complexity is worthwhile. If you choose #c, be prepared to
explain how this single task does not become a major bottleneck on
big multiprocessor machines (for example, if the task is updating
information relating to itself that other tasks can read, there
by definition can be no bottleneck).
2. Do the RCU read-side critical sections make proper use of
rcu_read_lock() and friends? These primitives are needed
@ -51,8 +50,10 @@ over a rather long period of time, but improvements are always welcome!
actuarial risk of your kernel.
As a rough rule of thumb, any dereference of an RCU-protected
pointer must be covered by rcu_read_lock() or rcu_read_lock_bh()
or by the appropriate update-side lock.
pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
rcu_read_lock_sched(), or by the appropriate update-side lock.
Disabling of preemption can serve as rcu_read_lock_sched(), but
is less readable.
3. Does the update code tolerate concurrent accesses?
@ -62,25 +63,27 @@ over a rather long period of time, but improvements are always welcome!
of ways to handle this concurrency, depending on the situation:
a. Use the RCU variants of the list and hlist update
primitives to add, remove, and replace elements on an
RCU-protected list. Alternatively, use the RCU-protected
trees that have been added to the Linux kernel.
primitives to add, remove, and replace elements on
an RCU-protected list. Alternatively, use the other
RCU-protected data structures that have been added to
the Linux kernel.
This is almost always the best approach.
b. Proceed as in (a) above, but also maintain per-element
locks (that are acquired by both readers and writers)
that guard per-element state. Of course, fields that
the readers refrain from accessing can be guarded by the
update-side lock.
the readers refrain from accessing can be guarded by
some other lock acquired only by updaters, if desired.
This works quite well, also.
c. Make updates appear atomic to readers. For example,
pointer updates to properly aligned fields will appear
atomic, as will individual atomic primitives. Operations
performed under a lock and sequences of multiple atomic
primitives will -not- appear to be atomic.
pointer updates to properly aligned fields will
appear atomic, as will individual atomic primitives.
Sequences of perations performed under a lock will -not-
appear to be atomic to RCU readers, nor will sequences
of multiple atomic primitives.
This can work, but is starting to get a bit tricky.
@ -98,9 +101,9 @@ over a rather long period of time, but improvements are always welcome!
a new structure containing updated values.
4. Weakly ordered CPUs pose special challenges. Almost all CPUs
are weakly ordered -- even i386 CPUs allow reads to be reordered.
RCU code must take all of the following measures to prevent
memory-corruption problems:
are weakly ordered -- even x86 CPUs allow later loads to be
reordered to precede earlier stores. RCU code must take all of
the following measures to prevent memory-corruption problems:
a. Readers must maintain proper ordering of their memory
accesses. The rcu_dereference() primitive ensures that
@ -113,14 +116,25 @@ over a rather long period of time, but improvements are always welcome!
The rcu_dereference() primitive is also an excellent
documentation aid, letting the person reading the code
know exactly which pointers are protected by RCU.
Please note that compilers can also reorder code, and
they are becoming increasingly aggressive about doing
just that. The rcu_dereference() primitive therefore
also prevents destructive compiler optimizations.
The rcu_dereference() primitive is used by the various
"_rcu()" list-traversal primitives, such as the
list_for_each_entry_rcu(). Note that it is perfectly
legal (if redundant) for update-side code to use
rcu_dereference() and the "_rcu()" list-traversal
primitives. This is particularly useful in code
that is common to readers and updaters.
The rcu_dereference() primitive is used by the
various "_rcu()" list-traversal primitives, such
as the list_for_each_entry_rcu(). Note that it is
perfectly legal (if redundant) for update-side code to
use rcu_dereference() and the "_rcu()" list-traversal
primitives. This is particularly useful in code that
is common to readers and updaters. However, lockdep
will complain if you access rcu_dereference() outside
of an RCU read-side critical section. See lockdep.txt
to learn what to do about this.
Of course, neither rcu_dereference() nor the "_rcu()"
list-traversal primitives can substitute for a good
concurrency design coordinating among multiple updaters.
b. If the list macros are being used, the list_add_tail_rcu()
and list_add_rcu() primitives must be used in order
@ -135,11 +149,14 @@ over a rather long period of time, but improvements are always welcome!
readers. Similarly, if the hlist macros are being used,
the hlist_del_rcu() primitive is required.
The list_replace_rcu() primitive may be used to
replace an old structure with a new one in an
RCU-protected list.
The list_replace_rcu() and hlist_replace_rcu() primitives
may be used to replace an old structure with a new one
in their respective types of RCU-protected lists.
d. Updates must ensure that initialization of a given
d. Rules similar to (4b) and (4c) apply to the "hlist_nulls"
type of RCU-protected linked lists.
e. Updates must ensure that initialization of a given
structure happens before pointers to that structure are
publicized. Use the rcu_assign_pointer() primitive
when publicizing a pointer to a structure that can
@ -151,16 +168,31 @@ over a rather long period of time, but improvements are always welcome!
it cannot block.
6. Since synchronize_rcu() can block, it cannot be called from
any sort of irq context. Ditto for synchronize_sched() and
synchronize_srcu().
any sort of irq context. The same rule applies for
synchronize_rcu_bh(), synchronize_sched(), synchronize_srcu(),
synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(),
synchronize_sched_expedite(), and synchronize_srcu_expedited().
7. If the updater uses call_rcu(), then the corresponding readers
must use rcu_read_lock() and rcu_read_unlock(). If the updater
uses call_rcu_bh(), then the corresponding readers must use
rcu_read_lock_bh() and rcu_read_unlock_bh(). If the updater
uses call_rcu_sched(), then the corresponding readers must
disable preemption. Mixing things up will result in confusion
and broken kernels.
The expedited forms of these primitives have the same semantics
as the non-expedited forms, but expediting is both expensive
and unfriendly to real-time workloads. Use of the expedited
primitives should be restricted to rare configuration-change
operations that would not normally be undertaken while a real-time
workload is running.
7. If the updater uses call_rcu() or synchronize_rcu(), then the
corresponding readers must use rcu_read_lock() and
rcu_read_unlock(). If the updater uses call_rcu_bh() or
synchronize_rcu_bh(), then the corresponding readers must
use rcu_read_lock_bh() and rcu_read_unlock_bh(). If the
updater uses call_rcu_sched() or synchronize_sched(), then
the corresponding readers must disable preemption, possibly
by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
If the updater uses synchronize_srcu(), the the corresponding
readers must use srcu_read_lock() and srcu_read_unlock(),
and with the same srcu_struct. The rules for the expedited
primitives are the same as for their non-expedited counterparts.
Mixing things up will result in confusion and broken kernels.
One exception to this rule: rcu_read_lock() and rcu_read_unlock()
may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
@ -212,6 +244,8 @@ over a rather long period of time, but improvements are always welcome!
e. Periodically invoke synchronize_rcu(), permitting a limited
number of updates per grace period.
The same cautions apply to call_rcu_bh() and call_rcu_sched().
9. All RCU list-traversal primitives, which include
rcu_dereference(), list_for_each_entry_rcu(),
list_for_each_continue_rcu(), and list_for_each_safe_rcu(),
@ -219,7 +253,9 @@ over a rather long period of time, but improvements are always welcome!
must be protected by appropriate update-side locks. RCU
read-side critical sections are delimited by rcu_read_lock()
and rcu_read_unlock(), or by similar primitives such as
rcu_read_lock_bh() and rcu_read_unlock_bh().
rcu_read_lock_bh() and rcu_read_unlock_bh(), in which case
the matching rcu_dereference() primitive must be used in order
to keep lockdep happy, in this case, rcu_dereference_bh().
The reason that it is permissible to use RCU list-traversal
primitives when the update-side lock is held is that doing so
@ -229,7 +265,8 @@ over a rather long period of time, but improvements are always welcome!
10. Conversely, if you are in an RCU read-side critical section,
and you don't hold the appropriate update-side lock, you -must-
use the "_rcu()" variants of the list macros. Failing to do so
will break Alpha and confuse people reading your code.
will break Alpha, cause aggressive compilers to generate bad code,
and confuse people trying to read your code.
11. Note that synchronize_rcu() -only- guarantees to wait until
all currently executing rcu_read_lock()-protected RCU read-side
@ -239,15 +276,21 @@ over a rather long period of time, but improvements are always welcome!
rcu_read_lock()-protected read-side critical sections, do -not-
use synchronize_rcu().
If you want to wait for some of these other things, you might
instead need to use synchronize_irq() or synchronize_sched().
Similarly, disabling preemption is not an acceptable substitute
for rcu_read_lock(). Code that attempts to use preemption
disabling where it should be using rcu_read_lock() will break
in real-time kernel builds.
If you want to wait for interrupt handlers, NMI handlers, and
code under the influence of preempt_disable(), you instead
need to use synchronize_irq() or synchronize_sched().
12. Any lock acquired by an RCU callback must be acquired elsewhere
with softirq disabled, e.g., via spin_lock_irqsave(),
spin_lock_bh(), etc. Failing to disable irq on a given
acquisition of that lock will result in deadlock as soon as the
RCU callback happens to interrupt that acquisition's critical
section.
acquisition of that lock will result in deadlock as soon as
the RCU softirq handler happens to run your RCU callback while
interrupting that acquisition's critical section.
13. RCU callbacks can be and are executed in parallel. In many cases,
the callback code simply wrappers around kfree(), so that this
@ -265,29 +308,30 @@ over a rather long period of time, but improvements are always welcome!
not the case, a self-spawning RCU callback would prevent the
victim CPU from ever going offline.)
14. SRCU (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu())
may only be invoked from process context. Unlike other forms of
RCU, it -is- permissible to block in an SRCU read-side critical
section (demarked by srcu_read_lock() and srcu_read_unlock()),
hence the "SRCU": "sleepable RCU". Please note that if you
don't need to sleep in read-side critical sections, you should
be using RCU rather than SRCU, because RCU is almost always
faster and easier to use than is SRCU.
14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(),
synchronize_srcu(), and synchronize_srcu_expedited()) may only
be invoked from process context. Unlike other forms of RCU, it
-is- permissible to block in an SRCU read-side critical section
(demarked by srcu_read_lock() and srcu_read_unlock()), hence the
"SRCU": "sleepable RCU". Please note that if you don't need
to sleep in read-side critical sections, you should be using
RCU rather than SRCU, because RCU is almost always faster and
easier to use than is SRCU.
Also unlike other forms of RCU, explicit initialization
and cleanup is required via init_srcu_struct() and
cleanup_srcu_struct(). These are passed a "struct srcu_struct"
that defines the scope of a given SRCU domain. Once initialized,
the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock()
and synchronize_srcu(). A given synchronize_srcu() waits only
for SRCU read-side critical sections governed by srcu_read_lock()
and srcu_read_unlock() calls that have been passd the same
srcu_struct. This property is what makes sleeping read-side
critical sections tolerable -- a given subsystem delays only
its own updates, not those of other subsystems using SRCU.
Therefore, SRCU is less prone to OOM the system than RCU would
be if RCU's read-side critical sections were permitted to
sleep.
synchronize_srcu(), and synchronize_srcu_expedited(). A given
synchronize_srcu() waits only for SRCU read-side critical
sections governed by srcu_read_lock() and srcu_read_unlock()
calls that have been passed the same srcu_struct. This property
is what makes sleeping read-side critical sections tolerable --
a given subsystem delays only its own updates, not those of other
subsystems using SRCU. Therefore, SRCU is less prone to OOM the
system than RCU would be if RCU's read-side critical sections
were permitted to sleep.
The ability to sleep in read-side critical sections does not
come for free. First, corresponding srcu_read_lock() and
@ -311,12 +355,12 @@ over a rather long period of time, but improvements are always welcome!
destructive operation, and -only- -then- invoke call_rcu(),
synchronize_rcu(), or friends.
Because these primitives only wait for pre-existing readers,
it is the caller's responsibility to guarantee safety to
any subsequent readers.
Because these primitives only wait for pre-existing readers, it
is the caller's responsibility to guarantee that any subsequent
readers will execute safely.
16. The various RCU read-side primitives do -not- contain memory
barriers. The CPU (and in some cases, the compiler) is free
to reorder code into and out of RCU read-side critical sections.
It is the responsibility of the RCU update-side primitives to
deal with this.
16. The various RCU read-side primitives do -not- necessarily contain
memory barriers. You should therefore plan for the CPU
and the compiler to freely reorder code into and out of RCU
read-side critical sections. It is the responsibility of the
RCU update-side primitives to deal with this.

67
Documentation/RCU/lockdep.txt Normal file
View File

@ -0,0 +1,67 @@
RCU and lockdep checking
All flavors of RCU have lockdep checking available, so that lockdep is
aware of when each task enters and leaves any flavor of RCU read-side
critical section. Each flavor of RCU is tracked separately (but note
that this is not the case in 2.6.32 and earlier). This allows lockdep's
tracking to include RCU state, which can sometimes help when debugging
deadlocks and the like.
In addition, RCU provides the following primitives that check lockdep's
state:
rcu_read_lock_held() for normal RCU.
rcu_read_lock_bh_held() for RCU-bh.
rcu_read_lock_sched_held() for RCU-sched.
srcu_read_lock_held() for SRCU.
These functions are conservative, and will therefore return 1 if they
aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
This prevents things like WARN_ON(!rcu_read_lock_held()) from giving false
positives when lockdep is disabled.
In addition, a separate kernel config parameter CONFIG_PROVE_RCU enables
checking of rcu_dereference() primitives:
rcu_dereference(p):
Check for RCU read-side critical section.
rcu_dereference_bh(p):
Check for RCU-bh read-side critical section.
rcu_dereference_sched(p):
Check for RCU-sched read-side critical section.
srcu_dereference(p, sp):
Check for SRCU read-side critical section.
rcu_dereference_check(p, c):
Use explicit check expression "c".
rcu_dereference_raw(p)
Don't check. (Use sparingly, if at all.)
The rcu_dereference_check() check expression can be any boolean
expression, but would normally include one of the rcu_read_lock_held()
family of functions and a lockdep expression. However, any boolean
expression can be used. For a moderately ornate example, consider
the following:
file = rcu_dereference_check(fdt->fd[fd],
rcu_read_lock_held() ||
lockdep_is_held(&files->file_lock) ||
atomic_read(&files->count) == 1);
This expression picks up the pointer "fdt->fd[fd]" in an RCU-safe manner,
and, if CONFIG_PROVE_RCU is configured, verifies that this expression
is used in:
1. An RCU read-side critical section, or
2. with files->file_lock held, or
3. on an unshared files_struct.
In case (1), the pointer is picked up in an RCU-safe manner for vanilla
RCU read-side critical sections, in case (2) the ->file_lock prevents
any change from taking place, and finally, in case (3) the current task
is the only task accessing the file_struct, again preventing any change
from taking place.
There are currently only "universal" versions of the rcu_assign_pointer()
and RCU list-/tree-traversal primitives, which do not (yet) check for
being in an RCU read-side critical section. In the future, separate
versions of these primitives might be created.

48
Documentation/RCU/rcu.txt
View File

@ -75,6 +75,8 @@ o I hear that RCU is patented? What is with that?
search for the string "Patent" in RTFP.txt to find them.
Of these, one was allowed to lapse by the assignee, and the
others have been contributed to the Linux kernel under GPL.
There are now also LGPL implementations of user-level RCU
available (http://lttng.org/?q=node/18).
o I hear that RCU needs work in order to support realtime kernels?
@ -91,48 +93,4 @@ o Where can I find more information on RCU?
o What are all these files in this directory?
NMI-RCU.txt
Describes how to use RCU to implement dynamic
NMI handlers, which can be revectored on the fly,
without rebooting.
RTFP.txt
List of RCU-related publications and web sites.
UP.txt
Discussion of RCU usage in UP kernels.
arrayRCU.txt
Describes how to use RCU to protect arrays, with
resizeable arrays whose elements reference other
data structures being of the most interest.
checklist.txt
Lists things to check for when inspecting code that
uses RCU.
listRCU.txt
Describes how to use RCU to protect linked lists.
This is the simplest and most common use of RCU
in the Linux kernel.
rcu.txt
You are reading it!
rcuref.txt
Describes how to combine use of reference counts
with RCU.
whatisRCU.txt
Overview of how the RCU implementation works. Along
the way, presents a conceptual view of RCU.
See 00-INDEX for the list.

58
Documentation/RCU/stallwarn.txt Normal file
View File

@ -0,0 +1,58 @@
Using RCU's CPU Stall Detector
The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
RCU's CPU stall detector, which detects conditions that unduly delay
RCU grace periods. The stall detector's idea of what constitutes
"unduly delayed" is controlled by a pair of C preprocessor macros:
RCU_SECONDS_TILL_STALL_CHECK
This macro defines the period of time that RCU will wait from
the beginning of a grace period until it issues an RCU CPU
stall warning. It is normally ten seconds.
RCU_SECONDS_TILL_STALL_RECHECK
This macro defines the period of time that RCU will wait after
issuing a stall warning until it issues another stall warning.
It is normally set to thirty seconds.
RCU_STALL_RAT_DELAY
The CPU stall detector tries to make the offending CPU rat on itself,
as this often gives better-quality stack traces. However, if
the offending CPU does not detect its own stall in the number
of jiffies specified by RCU_STALL_RAT_DELAY, then other CPUs will
complain. This is normally set to two jiffies.
The following problems can result in an RCU CPU stall warning:
o A CPU looping in an RCU read-side critical section.
o A CPU looping with interrupts disabled.
o A CPU looping with preemption disabled.
o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
without invoking schedule().
o A bug in the RCU implementation.
o A hardware failure. This is quite unlikely, but has occurred
at least once in a former life. A CPU failed in a running system,
becoming unresponsive, but not causing an immediate crash.
This resulted in a series of RCU CPU stall warnings, eventually
leading the realization that the CPU had failed.
The RCU, RCU-sched, and RCU-bh implementations have CPU stall warning.
SRCU does not do so directly, but its calls to synchronize_sched() will
result in RCU-sched detecting any CPU stalls that might be occurring.
To diagnose the cause of the stall, inspect the stack traces. The offending
function will usually be near the top of the stack. If you have a series
of stall warnings from a single extended stall, comparing the stack traces
can often help determine where the stall is occurring, which will usually
be in the function nearest the top of the stack that stays the same from
trace to trace.
RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE.

12
Documentation/RCU/torture.txt
View File

@ -30,6 +30,18 @@ MODULE PARAMETERS
This module has the following parameters:
fqs_duration Duration (in microseconds) of artificially induced bursts
of force_quiescent_state() invocations. In RCU
implementations having force_quiescent_state(), these
bursts help force races between forcing a given grace
period and that grace period ending on its own.
fqs_holdoff Holdoff time (in microseconds) between consecutive calls
to force_quiescent_state() within a burst.
fqs_stutter Wait time (in seconds) between consecutive bursts
of calls to force_quiescent_state().
irqreaders Says to invoke RCU readers from irq level. This is currently
done via timers. Defaults to "1" for variants of RCU that
permit this. (Or, more accurately, variants of RCU that do

16
Documentation/RCU/whatisRCU.txt
View File

@ -323,14 +323,17 @@ used as follows:
Defer Protect
a. synchronize_rcu() rcu_read_lock() / rcu_read_unlock()
call_rcu()
call_rcu() rcu_dereference()
b. call_rcu_bh() rcu_read_lock_bh() / rcu_read_unlock_bh()
rcu_dereference_bh()
c. synchronize_sched() preempt_disable() / preempt_enable()
c. synchronize_sched() rcu_read_lock_sched() / rcu_read_unlock_sched()
preempt_disable() / preempt_enable()
local_irq_save() / local_irq_restore()
hardirq enter / hardirq exit
NMI enter / NMI exit
rcu_dereference_sched()
These three mechanisms are used as follows:
@ -780,9 +783,8 @@ Linux-kernel source code, but it helps to have a full list of the
APIs, since there does not appear to be a way to categorize them
in docbook. Here is the list, by category.
RCU pointer/list traversal:
RCU list traversal:
rcu_dereference
list_for_each_entry_rcu
hlist_for_each_entry_rcu
hlist_nulls_for_each_entry_rcu
@ -808,7 +810,7 @@ RCU: Critical sections Grace period Barrier
rcu_read_lock synchronize_net rcu_barrier
rcu_read_unlock synchronize_rcu
synchronize_rcu_expedited
rcu_dereference synchronize_rcu_expedited
call_rcu
@ -816,7 +818,7 @@ bh: Critical sections Grace period Barrier
rcu_read_lock_bh call_rcu_bh rcu_barrier_bh
rcu_read_unlock_bh synchronize_rcu_bh
synchronize_rcu_bh_expedited
rcu_dereference_bh synchronize_rcu_bh_expedited
sched: Critical sections Grace period Barrier
@ -825,12 +827,14 @@ sched: Critical sections Grace period Barrier
rcu_read_unlock_sched call_rcu_sched
[preempt_disable] synchronize_sched_expedited
[and friends]
rcu_dereference_sched
SRCU: Critical sections Grace period Barrier
srcu_read_lock synchronize_srcu N/A
srcu_read_unlock synchronize_srcu_expedited
srcu_dereference
SRCU: Initialization/cleanup
init_srcu_struct

24
Documentation/cachetlb.txt
View File

@ -377,3 +377,27 @@ maps this page at its virtual address.
All the functionality of flush_icache_page can be implemented in
flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
remove this interface completely.
The final category of APIs is for I/O to deliberately aliased address
ranges inside the kernel. Such aliases are set up by use of the
vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O
subsystem assumes that the user mapping and kernel offset mapping are
the only aliases. This isn't true for vmap aliases, so anything in
the kernel trying to do I/O to vmap areas must manually manage
coherency. It must do this by flushing the vmap range before doing
I/O and invalidating it after the I/O returns.
void flush_kernel_vmap_range(void *vaddr, int size)
flushes the kernel cache for a given virtual address range in
the vmap area. This is to make sure that any data the kernel
modified in the vmap range is made visible to the physical
page. The design is to make this area safe to perform I/O on.
Note that this API does *not* also flush the offset map alias
of the area.
void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
the cache for a given virtual address range in the vmap area
which prevents the processor from making the cache stale by
speculatively reading data while the I/O was occurring to the
physical pages. This is only necessary for data reads into the
vmap area.

1
Documentation/dontdiff
View File

@ -69,7 +69,6 @@ av_permissions.h
bbootsect
bin2c
binkernel.spec
binoffset
bootsect
bounds.h
bsetup

23
Documentation/dvb/get_dvb_firmware
View File

@ -26,7 +26,7 @@ use IO::Handle;
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
"af9015");
"af9015", "ngene");
# Check args
syntax() if (scalar(@ARGV) != 1);
@ -39,7 +39,7 @@ for ($i=0; $i < scalar(@components); $i++) {
die $@ if $@;
print STDERR <<EOF;
Firmware(s) $outfile extracted successfully.
Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
exit(0);
@ -549,6 +549,24 @@ sub af9015 {
close INFILE;
}
sub ngene {
my $url = "http://www.digitaldevices.de/download/";
my $file1 = "ngene_15.fw";
my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
my $file2 = "ngene_17.fw";
my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
checkstandard();
wgetfile($file1, $url . $file1);
verify($file1, $hash1);
wgetfile($file2, $url . $file2);
verify($file2, $hash2);
"$file1, $file2";
}
# ---------------------------------------------------------------
# Utilities
@ -667,6 +685,7 @@ sub delzero{
sub syntax() {
print STDERR "syntax: get_dvb_firmware <component>\n";
print STDERR "Supported components:\n";
@components = sort @components;
for($i=0; $i < scalar(@components); $i++) {
print STDERR "\t" . $components[$i] . "\n";
}

26
Documentation/feature-removal-schedule.txt
View File

@ -6,21 +6,6 @@ be removed from this file.
---------------------------
What: USER_SCHED
When: 2.6.34
Why: USER_SCHED was implemented as a proof of concept for group scheduling.
The effect of USER_SCHED can already be achieved from userspace with
the help of libcgroup. The removal of USER_SCHED will also simplify
the scheduler code with the removal of one major ifdef. There are also
issues USER_SCHED has with USER_NS. A decision was taken not to fix
those and instead remove USER_SCHED. Also new group scheduling
features will not be implemented for USER_SCHED.
Who: Dhaval Giani <dhaval@linux.vnet.ibm.com>
---------------------------
What: PRISM54
When: 2.6.34
@ -64,6 +49,17 @@ Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
---------------------------
What: Deprecated snapshot ioctls
When: 2.6.36
Why: The ioctls in kernel/power/user.c were marked as deprecated long time
ago. Now they notify users about that so that they need to replace
their userspace. After some more time, remove them completely.
Who: Jiri Slaby <jirislaby@gmail.com>
---------------------------
What: The ieee80211_regdom module parameter
When: March 2010 / desktop catchup

3
Documentation/filesystems/dentry-locking.txt
View File

@ -62,7 +62,8 @@ changes are :
2. Insertion of a dentry into the hash table is done using
hlist_add_head_rcu() which take care of ordering the writes - the
writes to the dentry must be visible before the dentry is
inserted. This works in conjunction with hlist_for_each_rcu() while
inserted. This works in conjunction with hlist_for_each_rcu(),
which has since been replaced by hlist_for_each_entry_rcu(), while
walking the hash chain. The only requirement is that all
initialization to the dentry must be done before
hlist_add_head_rcu() since we don't have dcache_lock protection

35
Documentation/kernel-parameters.txt
View File

@ -200,6 +200,10 @@ and is between 256 and 4096 characters. It is defined in the file
acpi_display_output=video
See above.
acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods
early. Needed on some platforms to properly
initialize the EC.
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
@ -312,6 +316,11 @@ and is between 256 and 4096 characters. It is defined in the file
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
behaviour to be specified. Bit 0 enables warnings,
bit 1 enables fixups, and bit 2 sends a segfault.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
@ -1739,6 +1748,9 @@ and is between 256 and 4096 characters. It is defined in the file
nomfgpt [X86-32] Disable Multi-Function General Purpose
Timer usage (for AMD Geode machines).
nopat [X86] Disable PAT (page attribute table extension of
pagetables) support.
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
@ -1949,8 +1961,12 @@ and is between 256 and 4096 characters. It is defined in the file
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
use_crs [X86] Use _CRS for PCI resource
allocation.
use_crs [X86] Use PCI host bridge window information
from ACPI. On BIOSes from 2008 or later, this
is enabled by default. If you need to use this,
please report a bug.
nocrs [X86] Ignore PCI host bridge windows from ACPI.
If you need to use this, please report a bug.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
@ -1999,6 +2015,14 @@ and is between 256 and 4096 characters. It is defined in the file
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
off Do not use native PCIe PME signaling.
force Use native PCIe PME signaling even if the BIOS refuses
to allow the kernel to control the relevant PCIe config
registers.
nomsi Do not use MSI for native PCIe PME signaling (this makes
all PCIe root ports use INTx for everything).
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
@ -2704,6 +2728,13 @@ and is between 256 and 4096 characters. It is defined in the file
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
userpte=
[X86] Flags controlling user PTE allocations.
nohigh = do not allocate PTE pages in
HIGHMEM regardless of setting
of CONFIG_HIGHPTE.
vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)

1
Documentation/lguest/lguest.c
View File

@ -34,7 +34,6 @@
#include <sys/uio.h>
#include <termios.h>
#include <getopt.h>
#include <zlib.h>
#include <assert.h>
#include <sched.h>
#include <limits.h>

118
Documentation/pcmcia/locking.txt Normal file
View File

@ -0,0 +1,118 @@
This file explains the locking and exclusion scheme used in the PCCARD
and PCMCIA subsystems.
A) Overview, Locking Hierarchy:
===============================
pcmcia_socket_list_rwsem - protects only the list of sockets
- skt_mutex - serializes card insert / ejection
- ops_mutex - serializes socket operation
B) Exclusion
============
The following functions and callbacks to struct pcmcia_socket must
be called with "skt_mutex" held:
socket_detect_change()
send_event()
socket_reset()
socket_shutdown()
socket_setup()
socket_remove()
socket_insert()
socket_early_resume()
socket_late_resume()
socket_resume()
socket_suspend()
struct pcmcia_callback *callback
The following functions and callbacks to struct pcmcia_socket must
be called with "ops_mutex" held:
socket_reset()
socket_setup()
struct pccard_operations *ops
struct pccard_resource_ops *resource_ops;
Note that send_event() and struct pcmcia_callback *callback must not be
called with "ops_mutex" held.
C) Protection
=============
1. Global Data:
---------------
struct list_head pcmcia_socket_list;
protected by pcmcia_socket_list_rwsem;
2. Per-Socket Data:
-------------------
The resource_ops and their data are protected by ops_mutex.
The "main" struct pcmcia_socket is protected as follows (read-only fields
or single-use fields not mentioned):
- by pcmcia_socket_list_rwsem:
struct list_head socket_list;
- by thread_lock:
unsigned int thread_events;
- by skt_mutex:
u_int suspended_state;
void (*tune_bridge);
struct pcmcia_callback *callback;
int resume_status;
- by ops_mutex:
socket_state_t socket;
u_int state;
u_short lock_count;
pccard_mem_map cis_mem;
void __iomem *cis_virt;
struct { } irq;
io_window_t io[];
pccard_mem_map win[];
struct list_head cis_cache;
size_t fake_cis_len;
u8 *fake_cis;
u_int irq_mask;
void (*zoom_video);
int (*power_hook);
u8 resource...;
struct list_head devices_list;
u8 device_count;
struct pcmcia_state;
3. Per PCMCIA-device Data:
--------------------------
The "main" struct pcmcia_devie is protected as follows (read-only fields
or single-use fields not mentioned):
- by pcmcia_socket->ops_mutex:
struct list_head socket_device_list;
struct config_t *function_config;
u16 _irq:1;
u16 _io:1;
u16 _win:4;
u16 _locked:1;
u16 allow_func_id_match:1;
u16 suspended:1;
u16 _removed:1;
- by the PCMCIA driver:
io_req_t io;
irq_req_t irq;
config_req_t conf;
window_handle_t win;

70
Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt Normal file
View File

@ -0,0 +1,70 @@
MPC5121 PSC Device Tree Bindings
PSC in UART mode
----------------
For PSC in UART mode the needed PSC serial devices
are specified by fsl,mpc5121-psc-uart nodes in the
fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
Controller node fsl,mpc5121-psc-fifo is requered there:
fsl,mpc5121-psc-uart nodes
--------------------------
Required properties :
- compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
- cell-index : Index of the PSC in hardware
- reg : Offset and length of the register set for the PSC device
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Recommended properties :
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
- fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
fsl,mpc5121-psc-fifo node
-------------------------
Required properties :
- compatible : Should be "fsl,mpc5121-psc-fifo"
- reg : Offset and length of the register set for the PSC
FIFO Controller
- interrupts : <a b> where a is the interrupt number of the
PSC FIFO Controller and b is a field that represents an
encoding of the sense and level information for the interrupt.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Example for a board using PSC0 and PSC1 devices in serial mode:
serial@11000 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
cell-index = <0>;
reg = <0x11000 0x100>;
interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
};
serial@11100 {
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
cell-index = <1>;
reg = <0x11100 0x100>;
interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
fsl,rx-fifo-size = <16>;
fsl,tx-fifo-size = <16>;
};
pscfifo@11f00 {
compatible = "fsl,mpc5121-psc-fifo";
reg = <0x11f00 0x100>;
interrupts = <40 0x8>;
interrupt-parent = < &ipic >;
};

7
Documentation/powerpc/dts-bindings/fsl/spi.txt
View File

@ -13,6 +13,11 @@ Required properties:
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
Optional properties:
- gpios : specifies the gpio pins to be used for chipselects.
The gpios will be referred to as reg = <index> in the SPI child nodes.
If unspecified, a single SPI device without a chip select can be used.
Example:
spi@4c0 {
cell-index = <0>;
@ -21,4 +26,6 @@ Example:
interrupts = <82 0>;
interrupt-parent = <700>;
mode = "cpu";
gpios = <&gpio 18 1 // device reg=<0>
&gpio 19 1>; // device reg=<1>
};

134
Documentation/powerpc/ptrace.txt Normal file
View File

@ -0,0 +1,134 @@
GDB intends to support the following hardware debug features of BookE
processors:
4 hardware breakpoints (IAC)
2 hardware watchpoints (read, write and read-write) (DAC)
2 value conditions for the hardware watchpoints (DVC)
For that, we need to extend ptrace so that GDB can query and set these
resources. Since we're extending, we're trying to create an interface
that's extendable and that covers both BookE and server processors, so
that GDB doesn't need to special-case each of them. We added the
following 3 new ptrace requests.
1. PTRACE_PPC_GETHWDEBUGINFO
Query for GDB to discover the hardware debug features. The main info to
be returned here is the minimum alignment for the hardware watchpoints.
BookE processors don't have restrictions here, but server processors have
an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
adding special cases to GDB based on what it sees in AUXV.
Since we're at it, we added other useful info that the kernel can return to
GDB: this query will return the number of hardware breakpoints, hardware
watchpoints and whether it supports a range of addresses and a condition.
The query will fill the following structure provided by the requesting process:
struct ppc_debug_info {
unit32_t version;
unit32_t num_instruction_bps;
unit32_t num_data_bps;
unit32_t num_condition_regs;
unit32_t data_bp_alignment;
unit32_t sizeof_condition; /* size of the DVC register */
uint64_t features; /* bitmask of the individual flags */
};
features will have bits indicating whether there is support for:
#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
2. PTRACE_SETHWDEBUG
Sets a hardware breakpoint or watchpoint, according to the provided structure:
struct ppc_hw_breakpoint {
uint32_t version;
#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
#define PPC_BREAKPOINT_TRIGGER_READ 0x2
#define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
uint32_t trigger_type; /* only some combinations allowed */
#define PPC_BREAKPOINT_MODE_EXACT 0x0
#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
#define PPC_BREAKPOINT_MODE_MASK 0x3
uint32_t addr_mode; /* address match mode */
#define PPC_BREAKPOINT_CONDITION_MODE 0x3
#define PPC_BREAKPOINT_CONDITION_NONE 0x0
#define PPC_BREAKPOINT_CONDITION_AND 0x1
#define PPC_BREAKPOINT_CONDITION_EXACT 0x1 /* different name for the same thing as above */
#define PPC_BREAKPOINT_CONDITION_OR 0x2
#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 /* byte enable bits */
#define PPC_BREAKPOINT_CONDITION_BE(n) (1<<((n)+16))
uint32_t condition_mode; /* break/watchpoint condition flags */
uint64_t addr;
uint64_t addr2;
uint64_t condition_value;
};
A request specifies one event, not necessarily just one register to be set.
For instance, if the request is for a watchpoint with a condition, both the
DAC and DVC registers will be set in the same request.
With this GDB can ask for all kinds of hardware breakpoints and watchpoints
that the BookE supports. COMEFROM breakpoints available in server processors
are not contemplated, but that is out of the scope of this work.
ptrace will return an integer (handle) uniquely identifying the breakpoint or
watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
request to ask for its removal. Return -ENOSPC if the requested breakpoint
can't be allocated on the registers.
Some examples of using the structure to:
- set a breakpoint in the first breakpoint register
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) address;
p.addr2 = 0;
p.condition_value = 0;
- set a watchpoint which triggers on reads in the second watchpoint register
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) address;
p.addr2 = 0;
p.condition_value = 0;
- set a watchpoint which triggers only with a specific value
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
p.condition_mode = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
p.addr = (uint64_t) address;
p.addr2 = 0;
p.condition_value = (uint64_t) condition;
- set a ranged hardware breakpoint
p.version = PPC_DEBUG_CURRENT_VERSION;
p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
p.addr = (uint64_t) begin_range;
p.addr2 = (uint64_t) end_range;
p.condition_value = 0;
3. PTRACE_DELHWDEBUG
Takes an integer which identifies an existing breakpoint or watchpoint
(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
corresponding breakpoint or watchpoint..

6
Documentation/s390/CommonIO
View File

@ -87,6 +87,12 @@ Command line parameters
compatibility, by the device number in hexadecimal (0xabcd or abcd). Device
numbers given as 0xabcd will be interpreted as 0.0.abcd.
* /proc/cio_settle
A write request to this file is blocked until all queued cio actions are
handled. This will allow userspace to wait for pending work affecting
device availability after changing cio_ignore or the hardware configuration.
* For some of the information present in the /proc filesystem in 2.4 (namely,
/proc/subchannels and /proc/chpids), see driver-model.txt.
Information formerly in /proc/irq_count is now in /proc/interrupts.

4
Documentation/s390/driver-model.txt
View File

@ -223,8 +223,8 @@ touched by the driver - it should use the ccwgroup device's driver_data for its
private data.
To implement a ccwgroup driver, please refer to include/asm/ccwgroup.h. Keep in
mind that most drivers will need to implement both a ccwgroup and a ccw driver
(unless you have a meta ccw driver, like cu3088 for lcs and ctc).
mind that most drivers will need to implement both a ccwgroup and a ccw
driver.
2. Channel paths

16
Documentation/scsi/ChangeLog.megaraid_sas
View File

@ -1,3 +1,19 @@
1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang
2 Current Version : 00.00.04.17.1-rc1
3 Older Version : 00.00.04.12
1. Add the pad_0 in mfi frame structure to 0 to fix the
context value larger than 32bit value issue.
2. Add the logic drive list to the driver. Driver will
keep the logic drive list internal after driver load.
3. driver fixed the device update issue after get the AEN
PD delete/ADD, LD add/delete from FW.
1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang

5
Documentation/trace/ftrace-design.txt
View File

@ -238,11 +238,10 @@ HAVE_SYSCALL_TRACEPOINTS
You need very few things to get the syscalls tracing in an arch.
- Support HAVE_ARCH_TRACEHOOK (see arch/Kconfig).
- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
of syscalls supported by the arch.
- Implement arch_syscall_addr() that resolves a syscall address from a
syscall number.
- Support the TIF_SYSCALL_TRACEPOINT thread flags
- Support the TIF_SYSCALL_TRACEPOINT thread flags.
- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
in the ptrace syscalls tracing path.
- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.

57
Documentation/trace/kprobetrace.txt
View File

@ -24,6 +24,7 @@ Synopsis of kprobe_events
-------------------------
p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS] : Set a probe
r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS] : Set a return probe
-:[GRP/]EVENT : Clear a probe
GRP : Group name. If omitted, use "kprobes" for it.
EVENT : Event name. If omitted, the event name is generated
@ -37,15 +38,12 @@ Synopsis of kprobe_events
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address.
$argN : Fetch function argument. (N >= 0)(*)
$retval : Fetch return value.(**)
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
$retval : Fetch return value.(*)
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
(*) aN may not correct on asmlinkaged functions and at the middle of
function body.
(**) only for return probe.
(***) this is useful for fetching a field of data structures.
(*) only for return probe.
(**) this is useful for fetching a field of data structures.
Per-Probe Event Filtering
@ -82,13 +80,16 @@ Usage examples
To add a probe as a new event, write a new definition to kprobe_events
as below.
echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
echo 'p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack)' > /sys/kernel/debug/tracing/kprobe_events
This sets a kprobe on the top of do_sys_open() function with recording
1st to 4th arguments as "myprobe" event. As this example shows, users can
choose more familiar names for each arguments.
1st to 4th arguments as "myprobe" event. Note, which register/stack entry is
assigned to each function argument depends on arch-specific ABI. If you unsure
the ABI, please try to use probe subcommand of perf-tools (you can find it
under tools/perf/).
As this example shows, users can choose more familiar names for each arguments.
echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
echo 'r:myretprobe do_sys_open $retval' >> /sys/kernel/debug/tracing/kprobe_events
This sets a kretprobe on the return point of do_sys_open() function with
recording return value as "myretprobe" event.
@ -97,23 +98,24 @@ recording return value as "myretprobe" event.
cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
name: myprobe
ID: 75
ID: 780
format:
field:unsigned short common_type; offset:0; size:2;
field:unsigned char common_flags; offset:2; size:1;
field:unsigned char common_preempt_count; offset:3; size:1;
field:int common_pid; offset:4; size:4;
field:int common_tgid; offset:8; size:4;
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int common_lock_depth; offset:8; size:4; signed:1;
field: unsigned long ip; offset:16;tsize:8;
field: int nargs; offset:24;tsize:4;
field: unsigned long dfd; offset:32;tsize:8;
field: unsigned long filename; offset:40;tsize:8;
field: unsigned long flags; offset:48;tsize:8;
field: unsigned long mode; offset:56;tsize:8;
field:unsigned long __probe_ip; offset:12; size:4; signed:0;
field:int __probe_nargs; offset:16; size:4; signed:1;
field:unsigned long dfd; offset:20; size:4; signed:0;
field:unsigned long filename; offset:24; size:4; signed:0;
field:unsigned long flags; offset:28; size:4; signed:0;
field:unsigned long mode; offset:32; size:4; signed:0;
print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->__probe_ip,
REC->dfd, REC->filename, REC->flags, REC->mode
You can see that the event has 4 arguments as in the expressions you specified.
@ -121,6 +123,12 @@ print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, R
This clears all probe points.
Or,
echo -:myprobe >> kprobe_events
This clears probe points selectively.
Right after definition, each event is disabled by default. For tracing these
events, you need to enable it.
@ -146,4 +154,3 @@ events, you need to enable it.
returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
returns from do_sys_open to sys_open+0x1b).

1
Documentation/video4linux/CARDLIST.cx23885
View File

@ -26,3 +26,4 @@
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
28 -> LEADTEK WinFast PxTV1200 [107d:6f22]

1
Documentation/video4linux/CARDLIST.saa7134
View File

@ -174,3 +174,4 @@
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
174 -> Asus Europa Hybrid OEM [1043:4847]
175 -> Leadtek Winfast DTV1000S [107d:6655]
176 -> Beholder BeholdTV 505 RDS [0000:5051]

1
Documentation/video4linux/CARDLIST.tuner
View File

@ -81,3 +81,4 @@ tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
tuner=81 - Partsnic (Daewoo) PTI-5NF05
tuner=82 - Philips CU1216L
tuner=83 - NXP TDA18271
tuner=84 - Sony BTF-Pxn01Z

47
Documentation/video4linux/README.tlg2300 Normal file
View File

@ -0,0 +1,47 @@
tlg2300 release notes
====================
This is a v4l2/dvb device driver for the tlg2300 chip.
current status
==============
video
- support mmap and read().(no overlay)
audio
- The driver will register a ALSA card for the audio input.
vbi
- Works for almost TV norms.
dvb-t
- works for DVB-T
FM
- Works for radio.
---------------------------------------------------------------------------
TESTED APPLICATIONS:
-VLC1.0.4 test the video and dvb. The GUI is friendly to use.
-Mplayer test the video.
-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
--enable-radio-capture.
The command runs as this(The alsa audio registers to card 1):
#mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
-rawaudio rate=48000:channels=2
---------------------------------------------------------------------------
KNOWN PROBLEMS:
about preemphasis:
You can set the preemphasis for radio by the following command:
#v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1
"pre_emphasis_settings=1" means that you select the 50us. If you want
to select the 75us, please use "pre_emphasis_settings=2"

25
Documentation/video4linux/gspca.txt
View File

@ -42,6 +42,7 @@ ov519 041e:4064 Creative Live! VISTA VF0420
ov519 041e:4067 Creative Live! Cam Video IM (VF0350)
ov519 041e:4068 Creative Live! VISTA VF0470
spca561 0458:7004 Genius VideoCAM Express V2
sn9c2028 0458:7005 Genius Smart 300, version 2
sunplus 0458:7006 Genius Dsc 1.3 Smart
zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
@ -109,6 +110,7 @@ sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
sunplus 04a5:300a Benq DC 3410
spca500 04a5:300c Benq DC 1016
benq 04a5:3035 Benq DC E300
finepix 04cb:0104 Fujifilm FinePix 4800
finepix 04cb:0109 Fujifilm FinePix A202
finepix 04cb:010b Fujifilm FinePix A203
@ -142,6 +144,7 @@ sunplus 04fc:5360 Sunplus Generic
spca500 04fc:7333 PalmPixDC85
sunplus 04fc:ffff Pure DigitalDakota
spca501 0506:00df 3Com HomeConnect Lite
sunplus 052b:1507 Megapixel 5 Pretec DC-1007
sunplus 052b:1513 Megapix V4
sunplus 052b:1803 MegaImage VI
tv8532 0545:808b Veo Stingray
@ -151,6 +154,7 @@ sunplus 0546:3191 Polaroid Ion 80
sunplus 0546:3273 Polaroid PDC2030
ov519 054c:0154 Sonny toy4
ov519 054c:0155 Sonny toy5
cpia1 0553:0002 CPIA CPiA (version1) based cameras
zc3xx 055f:c005 Mustek Wcam300A
spca500 055f:c200 Mustek Gsmart 300
sunplus 055f:c211 Kowa Bs888e Microcamera
@ -188,8 +192,7 @@ spca500 06bd:0404 Agfa CL20
spca500 06be:0800 Optimedia
sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom
spca506 06e1:a190 ADS Instant VCD
ov534 06f8:3002 Hercules Blog Webcam
ov534 06f8:3003 Hercules Dualpix HD Weblog
ov534_9 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7302 06f8:3009 Hercules Classic Link
@ -204,6 +207,7 @@ sunplus 0733:2221 Mercury Digital Pro 3.1p
sunplus 0733:3261 Concord 3045 spca536a
sunplus 0733:3281 Cyberpix S550V
spca506 0734:043b 3DeMon USB Capture aka
cpia1 0813:0001 QX3 camera
ov519 0813:0002 Dual Mode USB Camera Plus
spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
@ -225,7 +229,8 @@ sunplus 08ca:2050 Medion MD 41437
sunplus 08ca:2060 Aiptek PocketDV5300
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
mr97310a 093a:010f Sakar Digital no. 77379
mr97310a 093a:010e All known CIF cams with this ID
mr97310a 093a:010f All known VGA cams with this ID
pac207 093a:2460 Qtec Webcam 100
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
@ -302,6 +307,7 @@ sonixj 0c45:613b Surfer SN-206
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
sonixj 0c45:614a Frontech E-Ccam (JIL-2225)
sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
@ -324,6 +330,10 @@ sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
sn9c2028 0c45:8001 Wild Planet Digital Spy Camera
sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams
sn9c2028 0c45:8008 Mini-Shotz ms-350
sn9c2028 0c45:800a Vivitar Vivicam 3350B
sunplus 0d64:0303 Sunplus FashionCam DXG
ov519 0e96:c001 TRUST 380 USB2 SPACEC@M
etoms 102c:6151 Qcam Sangha CIF
@ -341,10 +351,11 @@ spca501 1776:501c Arowana 300K CMOS Camera
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
sq905c 2770:9050 sq905c
sq905c 2770:905c DualCamera
sq905 2770:9120 Argus Digital Camera DC1512
sq905c 2770:913d sq905c
sq905c 2770:9050 Disney pix micro (CIF)
sq905c 2770:9052 Disney pix micro 2 (VGA)
sq905c 2770:905c All 11 known cameras with this ID
sq905 2770:9120 All 24 known cameras with this ID
sq905c 2770:913d All 4 known cameras with this ID
spca500 2899:012c Toptro Industrial
ov519 8020:ef04 ov519
spca508 8086:0110 Intel Easy PC Camera

104
Documentation/video4linux/v4l2-framework.txt
View File

@ -599,99 +599,13 @@ video_device::minor fields.
video buffer helper functions
-----------------------------
The v4l2 core API provides a standard method for dealing with video
buffers. Those methods allow a driver to implement read(), mmap() and
overlay() on a consistent way.
The v4l2 core API provides a set of standard methods (called "videobuf")
for dealing with video buffers. Those methods allow a driver to implement
read(), mmap() and overlay() in a consistent way. There are currently
methods for using video buffers on devices that supports DMA with
scatter/gather method (videobuf-dma-sg), DMA with linear access
(videobuf-dma-contig), and vmalloced buffers, mostly used on USB drivers
(videobuf-vmalloc).
There are currently methods for using video buffers on devices that
supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
linear access (videobuf-dma-contig), and vmalloced buffers, mostly
used on USB drivers (videobuf-vmalloc).
Any driver using videobuf should provide operations (callbacks) for
four handlers:
ops->buf_setup - calculates the size of the video buffers and avoid they
to waste more than some maximum limit of RAM;
ops->buf_prepare - fills the video buffer structs and calls
videobuf_iolock() to alloc and prepare mmaped memory;
ops->buf_queue - advices the driver that another buffer were
requested (by read() or by QBUF);
ops->buf_release - frees any buffer that were allocated.
In order to use it, the driver need to have a code (generally called at
interrupt context) that will properly handle the buffer request lists,
announcing that a new buffer were filled.
The irq handling code should handle the videobuf task lists, in order
to advice videobuf that a new frame were filled, in order to honor to a
request. The code is generally like this one:
if (list_empty(&dma_q->active))
return;
buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
if (!waitqueue_active(&buf->vb.done))
return;
/* Some logic to handle the buf may be needed here */
list_del(&buf->vb.queue);
do_gettimeofday(&buf->vb.ts);
wake_up(&buf->vb.done);
Those are the videobuffer functions used on drivers, implemented on
videobuf-core:
- Videobuf init functions
videobuf_queue_sg_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that uses DMA
Scatter/Gather buffers.
videobuf_queue_dma_contig_init
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that need DMA
contiguous buffers.
videobuf_queue_vmalloc_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on USB (and other drivers)
that need a vmalloced type of videobuf.
- videobuf_iolock()
Prepares the videobuf memory for the proper method (read, mmap, overlay).
- videobuf_queue_is_busy()
Checks if a videobuf is streaming.
- videobuf_queue_cancel()
Stops video handling.
- videobuf_mmap_free()
frees mmap buffers.
- videobuf_stop()
Stops video handling, ends mmap and frees mmap and other buffers.
- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
videobuf_cgmbuf()
This function is used to provide backward compatibility with V4L1
API.
- Some help functions for read()/poll() operations:
videobuf_read_stream()
For continuous stream read()
videobuf_read_one()
For snapshot read()
videobuf_poll_stream()
polling help function
The better way to understand it is to take a look at vivi driver. One
of the main reasons for vivi is to be a videobuf usage example. the
vivi_thread_tick() does the task that the IRQ callback would do on PCI
drivers (or the irq callback on USB).
Please see Documentation/video4linux/videobuf for more information on how
to use the videobuf layer.

360
Documentation/video4linux/videobuf Normal file
View File

@ -0,0 +1,360 @@
An introduction to the videobuf layer
Jonathan Corbet <corbet@lwn.net>
Current as of 2.6.33
The videobuf layer functions as a sort of glue layer between a V4L2 driver
and user space. It handles the allocation and management of buffers for
the storage of video frames. There is a set of functions which can be used
to implement many of the standard POSIX I/O system calls, including read(),
poll(), and, happily, mmap(). Another set of functions can be used to
implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
including buffer allocation, queueing and dequeueing, and streaming
control. Using videobuf imposes a few design decisions on the driver
author, but the payback comes in the form of reduced code in the driver and
a consistent implementation of the V4L2 user-space API.
Buffer types
Not all video devices use the same kind of buffers. In fact, there are (at
least) three common variations:
- Buffers which are scattered in both the physical and (kernel) virtual
address spaces. (Almost) all user-space buffers are like this, but it
makes great sense to allocate kernel-space buffers this way as well when
it is possible. Unfortunately, it is not always possible; working with
this kind of buffer normally requires hardware which can do
scatter/gather DMA operations.
- Buffers which are physically scattered, but which are virtually
contiguous; buffers allocated with vmalloc(), in other words. These
buffers are just as hard to use for DMA operations, but they can be
useful in situations where DMA is not available but virtually-contiguous
buffers are convenient.
- Buffers which are physically contiguous. Allocation of this kind of
buffer can be unreliable on fragmented systems, but simpler DMA
controllers cannot deal with anything else.
Videobuf can work with all three types of buffers, but the driver author
must pick one at the outset and design the driver around that decision.
[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
which are located within the system's video memory. The overlay
functionality is considered to be deprecated for most use, but it still
shows up occasionally in system-on-chip drivers where the performance
benefits merit the use of this technique. Overlay buffers can be handled
as a form of scattered buffer, but there are very few implementations in
the kernel and a description of this technique is currently beyond the
scope of this document.]
Data structures, callbacks, and initialization
Depending on which type of buffers are being used, the driver should
include one of the following files:
<media/videobuf-dma-sg.h> /* Physically scattered */
<media/videobuf-vmalloc.h> /* vmalloc() buffers */
<media/videobuf-dma-contig.h> /* Physically contiguous */
The driver's data structure describing a V4L2 device should include a
struct videobuf_queue instance for the management of the buffer queue,
along with a list_head for the queue of available buffers. There will also
need to be an interrupt-safe spinlock which is used to protect (at least)
the queue.
The next step is to write four simple callbacks to help videobuf deal with
the management of buffers:
struct videobuf_queue_ops {
int (*buf_setup)(struct videobuf_queue *q,
unsigned int *count, unsigned int *size);
int (*buf_prepare)(struct videobuf_queue *q,
struct videobuf_buffer *vb,
enum v4l2_field field);
void (*buf_queue)(struct videobuf_queue *q,
struct videobuf_buffer *vb);
void (*buf_release)(struct videobuf_queue *q,
struct videobuf_buffer *vb);
};
buf_setup() is called early in the I/O process, when streaming is being
initiated; its purpose is to tell videobuf about the I/O stream. The count
parameter will be a suggested number of buffers to use; the driver should
check it for rationality and adjust it if need be. As a practical rule, a
minimum of two buffers are needed for proper streaming, and there is
usually a maximum (which cannot exceed 32) which makes sense for each
device. The size parameter should be set to the expected (maximum) size
for each frame of data.
Each buffer (in the form of a struct videobuf_buffer pointer) will be
passed to buf_prepare(), which should set the buffer's size, width, height,
and field fields properly. If the buffer's state field is
VIDEOBUF_NEEDS_INIT, the driver should pass it to:
int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
struct v4l2_framebuffer *fbuf);
Among other things, this call will usually allocate memory for the buffer.
Finally, the buf_prepare() function should set the buffer's state to
VIDEOBUF_PREPARED.
When a buffer is queued for I/O, it is passed to buf_queue(), which should
put it onto the driver's list of available buffers and set its state to
VIDEOBUF_QUEUED. Note that this function is called with the queue spinlock
held; if it tries to acquire it as well things will come to a screeching
halt. Yes, this is the voice of experience. Note also that videobuf may
wait on the first buffer in the queue; placing other buffers in front of it
could again gum up the works. So use list_add_tail() to enqueue buffers.
Finally, buf_release() is called when a buffer is no longer intended to be
used. The driver should ensure that there is no I/O active on the buffer,
then pass it to the appropriate free routine(s):
/* Scatter/gather drivers */
int videobuf_dma_unmap(struct videobuf_queue *q,
struct videobuf_dmabuf *dma);
int videobuf_dma_free(struct videobuf_dmabuf *dma);
/* vmalloc drivers */
void videobuf_vmalloc_free (struct videobuf_buffer *buf);
/* Contiguous drivers */
void videobuf_dma_contig_free(struct videobuf_queue *q,
struct videobuf_buffer *buf);
One way to ensure that a buffer is no longer under I/O is to pass it to:
int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
should be used (it should be zero in the buf_release() case), and intr
controls whether an interruptible wait is used.
File operations
At this point, much of the work is done; much of the rest is slipping
videobuf calls into the implementation of the other driver callbacks. The
first step is in the open() function, which must initialize the
videobuf queue. The function to use depends on the type of buffer used:
void videobuf_queue_sg_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
unsigned int msize,
void *priv);
In each case, the parameters are the same: q is the queue structure for the
device, ops is the set of callbacks as described above, dev is the device
structure for this video device, irqlock is an interrupt-safe spinlock to
protect access to the data structures, type is the buffer type used by the
device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
describes which field is being captured (often V4L2_FIELD_NONE for
progressive devices), msize is the size of any containing structure used
around struct videobuf_buffer, and priv is a private data pointer which
shows up in the priv_data field of struct videobuf_queue. Note that these
are void functions which, evidently, are immune to failure.
V4L2 capture drivers can be written to support either of two APIs: the
read() system call and the rather more complicated streaming mechanism. As
a general rule, it is necessary to support both to ensure that all
applications have a chance of working with the device. Videobuf makes it
easy to do that with the same code. To implement read(), the driver need
only make a call to one of:
ssize_t videobuf_read_one(struct videobuf_queue *q,
char __user *data, size_t count,
loff_t *ppos, int nonblocking);
ssize_t videobuf_read_stream(struct videobuf_queue *q,
char __user *data, size_t count,
loff_t *ppos, int vbihack, int nonblocking);
Either one of these functions will read frame data into data, returning the
amount actually read; the difference is that videobuf_read_one() will only
read a single frame, while videobuf_read_stream() will read multiple frames
if they are needed to satisfy the count requested by the application. A
typical driver read() implementation will start the capture engine, call
one of the above functions, then stop the engine before returning (though a
smarter implementation might leave the engine running for a little while in
anticipation of another read() call happening in the near future).
The poll() function can usually be implemented with a direct call to:
unsigned int videobuf_poll_stream(struct file *file,
struct videobuf_queue *q,
poll_table *wait);
Note that the actual wait queue eventually used will be the one associated
with the first available buffer.
When streaming I/O is done to kernel-space buffers, the driver must support
the mmap() system call to enable user space to access the data. In many
V4L2 drivers, the often-complex mmap() implementation simplifies to a
single call to:
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma);
Everything else is handled by the videobuf code.
The release() function requires two separate videobuf calls:
void videobuf_stop(struct videobuf_queue *q);
int videobuf_mmap_free(struct videobuf_queue *q);
The call to videobuf_stop() terminates any I/O in progress - though it is
still up to the driver to stop the capture engine. The call to
videobuf_mmap_free() will ensure that all buffers have been unmapped; if
so, they will all be passed to the buf_release() callback. If buffers
remain mapped, videobuf_mmap_free() returns an error code instead. The
purpose is clearly to cause the closing of the file descriptor to fail if
buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
ignores its return value.
ioctl() operations
The V4L2 API includes a very long list of driver callbacks to respond to
the many ioctl() commands made available to user space. A number of these
- those associated with streaming I/O - turn almost directly into videobuf
calls. The relevant helper functions are:
int videobuf_reqbufs(struct videobuf_queue *q,
struct v4l2_requestbuffers *req);
int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
int nonblocking);
int videobuf_streamon(struct videobuf_queue *q);
int videobuf_streamoff(struct videobuf_queue *q);
int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
int count);
So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
vidioc_reqbufs() callback which, in turn, usually only needs to locate the
proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
These support functions can replace a great deal of buffer management
boilerplate in a lot of V4L2 drivers.
The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
complex, of course, since they will also need to deal with starting and
stopping the capture engine. videobuf_cgmbuf(), called from the driver's
vidiocgmbuf() function, only exists if the V4L1 compatibility module has
been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
with #ifdef directives.
Buffer allocation
Thus far, we have talked about buffers, but have not looked at how they are
allocated. The scatter/gather case is the most complex on this front. For
allocation, the driver can leave buffer allocation entirely up to the
videobuf layer; in this case, buffers will be allocated as anonymous
user-space pages and will be very scattered indeed. If the application is
using user-space buffers, no allocation is needed; the videobuf layer will
take care of calling get_user_pages() and filling in the scatterlist array.
If the driver needs to do its own memory allocation, it should be done in
the vidioc_reqbufs() function, *after* calling videobuf_reqbufs(). The
first step is a call to:
struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
The returned videobuf_dmabuf structure (defined in
<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
struct scatterlist *sglist;
int sglen;
The driver must allocate an appropriately-sized scatterlist array and
populate it with pointers to the pieces of the allocated buffer; sglen
should be set to the length of the array.
Drivers using the vmalloc() method need not (and cannot) concern themselves
with buffer allocation at all; videobuf will handle those details. The
same is normally true of contiguous-DMA drivers as well; videobuf will
allocate the buffers (with dma_alloc_coherent()) when it sees fit. That
means that these drivers may be trying to do high-order allocations at any
time, an operation which is not always guaranteed to work. Some drivers
play tricks by allocating DMA space at system boot time; videobuf does not
currently play well with those drivers.
As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
as long as that buffer is physically contiguous. Normal user-space
allocations will not meet that criterion, but buffers obtained from other
kernel drivers, or those contained within huge pages, will work with these
drivers.
Filling the buffers
The final part of a videobuf implementation has no direct callback - it's
the portion of the code which actually puts frame data into the buffers,
usually in response to interrupts from the device. For all types of
drivers, this process works approximately as follows:
- Obtain the next available buffer and make sure that somebody is actually
waiting for it.
- Get a pointer to the memory and put video data there.
- Mark the buffer as done and wake up the process waiting for it.
Step (1) above is done by looking at the driver-managed list_head structure
- the one which is filled in the buf_queue() callback. Because starting
the engine and enqueueing buffers are done in separate steps, it's possible
for the engine to be running without any buffers available - in the
vmalloc() case especially. So the driver should be prepared for the list
to be empty. It is equally possible that nobody is yet interested in the
buffer; the driver should not remove it from the list or fill it until a
process is waiting on it. That test can be done by examining the buffer's
done field (a wait_queue_head_t structure) with waitqueue_active().
A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
DMA; that ensures that the videobuf layer will not try to do anything with
it while the device is transferring data.
For scatter/gather drivers, the needed memory pointers will be found in the
scatterlist structure described above. Drivers using the vmalloc() method
can get a memory pointer with:
void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
For contiguous DMA drivers, the function to use is:
dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
The contiguous DMA API goes out of its way to hide the kernel-space address
of the DMA buffer from drivers.
The final step is to set the size field of the relevant videobuf_buffer
structure to the actual size of the captured image, set state to
VIDEOBUF_DONE, then call wake_up() on the done queue. At this point, the
buffer is owned by the videobuf layer and the driver should not touch it
again.
Developers who are interested in more information can go into the relevant
header files; there are a few low-level functions declared there which have
not been talked about here. Also worthwhile is the vivi driver
(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
drivers should be written. Vivi only uses the vmalloc() API, but it's good
enough to get started with. Note also that all of these calls are exported
GPL-only, so they will not be available to non-GPL kernel modules.

20
Documentation/x86/x86_64/boot-options.txt
View File

@ -166,19 +166,13 @@ NUMA
numa=noacpi Don't parse the SRAT table for NUMA setup
numa=fake=CMDLINE
If a number, fakes CMDLINE nodes and ignores NUMA setup of the
actual machine. Otherwise, system memory is configured
depending on the sizes and coefficients listed. For example:
numa=fake=2*512,1024,4*256,*128
gives two 512M nodes, a 1024M node, four 256M nodes, and the
rest split into 128M chunks. If the last character of CMDLINE
is a *, the remaining memory is divided up equally among its
coefficient:
numa=fake=2*512,2*
gives two 512M nodes and the rest split into two nodes.
Otherwise, the remaining system RAM is allocated to an
additional node.
numa=fake=<size>[MG]
If given as a memory unit, fills all system RAM with nodes of
size interleaved over physical nodes.
numa=fake=<N>
If given as an integer, fills all system RAM with N fake nodes
interleaved over physical nodes.
ACPI

80
MAINTAINERS
View File

@ -221,6 +221,7 @@ F: drivers/net/acenic*
ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
M: Peter Feuerer <peter@piie.net>
L: platform-driver-x86@vger.kernel.org
W: http://piie.net/?section=acerhdf
S: Maintained
F: drivers/platform/x86/acerhdf.c
@ -228,6 +229,7 @@ F: drivers/platform/x86/acerhdf.c
ACER WMI LAPTOP EXTRAS
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: aceracpi@googlegroups.com (subscribers-only)
L: platform-driver-x86@vger.kernel.org
W: http://code.google.com/p/aceracpi
S: Maintained
F: drivers/platform/x86/acer-wmi.c
@ -288,7 +290,7 @@ F: drivers/acpi/video.c
ACPI WMI DRIVER
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: linux-acpi@vger.kernel.org
L: platform-driver-x86@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
F: drivers/platform/x86/wmi.c
@ -616,10 +618,10 @@ M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
S: Odd Fixes
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
@ -641,9 +643,9 @@ T: topgit git://git.openezx.org/openezx.git
F: arch/arm/mach-pxa/ezx.c
ARM/FARADAY FA526 PORT
M: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
M: Paulius Zaleckas <paulius.zaleckas@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
@ -968,6 +970,7 @@ ASUS ACPI EXTRAS DRIVER
M: Corentin Chary <corentincj@iksaif.net>
M: Karol Kozimor <sziwan@users.sourceforge.net>
L: acpi4asus-user@lists.sourceforge.net
L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus_acpi.c
@ -981,6 +984,7 @@ F: drivers/hwmon/asb100.c
ASUS LAPTOP EXTRAS DRIVER
M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/asus-laptop.c
@ -1473,6 +1477,7 @@ F: drivers/scsi/fnic/
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Daniel Oliveira Nascimento <don@syst.com.br>
L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/classmate-laptop.c
@ -1516,6 +1521,7 @@ F: drivers/pci/hotplug/cpcihp_generic.c
COMPAL LAPTOP SUPPORT
M: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/compal-laptop.c
@ -1746,6 +1752,7 @@ F: drivers/net/defxx.*
DELL LAPTOP DRIVER
M: Matthew Garrett <mjg59@srcf.ucam.org>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/dell-laptop.c
@ -2028,6 +2035,7 @@ F: drivers/edac/r82600_edac.c
EEEPC LAPTOP EXTRAS DRIVER
M: Corentin Chary <corentincj@iksaif.net>
L: acpi4asus-user@lists.sourceforge.net
L: platform-driver-x86@vger.kernel.org
W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
@ -2141,6 +2149,17 @@ S: Supported
F: Documentation/fault-injection/
F: lib/fault-inject.c
FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
M: Robert Love <robert.w.love@intel.com>
L: devel@open-fcoe.org
W: www.Open-FCoE.org
S: Supported
F: drivers/scsi/libfc/
F: drivers/scsi/fcoe/
F: include/scsi/fc/
F: include/scsi/libfc.h
F: include/scsi/libfcoe.h
FILE LOCKING (flock() and fcntl()/lockf())
M: Matthew Wilcox <matthew@wil.cx>
L: linux-fsdevel@vger.kernel.org
@ -2295,7 +2314,7 @@ F: arch/frv/
FUJITSU LAPTOP EXTRAS
M: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
L: linux-acpi@vger.kernel.org
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/fujitsu-laptop.c
@ -2399,6 +2418,18 @@ L: linuxppc-dev@ozlabs.org
S: Odd Fixes
F: drivers/char/hvc_*
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
S: Maintained
F: drivers/firmware/iscsi_ibft*
GSPCA FINEPIX SUBDRIVER
M: Frank Zago <frank@zago.net>
L: linux-media@vger.kernel.org
@ -2567,6 +2598,7 @@ F: drivers/net/wireless/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
M: Carlos Corbacho <carlos@strangeworlds.co.uk>
L: platform-driver-x86@vger.kernel.org
S: Odd Fixes
F: drivers/platform/x86/tc1100-wmi.c
@ -2777,7 +2809,7 @@ F: drivers/video/i810/
INTEL MENLOW THERMAL DRIVER
M: Sujith Thomas <sujith.thomas@intel.com>
L: linux-acpi@vger.kernel.org
L: platform-driver-x86@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
F: drivers/platform/x86/intel_menlow.c
@ -3643,6 +3675,7 @@ F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
M: Lennart Poettering <mzxreary@0pointer.de>
L: platform-driver-x86@vger.kernel.org
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
@ -3650,6 +3683,7 @@ F: drivers/platform/x86/msi-laptop.c
MSI WMI SUPPORT
M: Anisse Astier <anisse@astier.eu>
L: platform-driver-x86@vger.kernel.org
S: Supported
F: drivers/platform/x86/msi-wmi.c
@ -4102,6 +4136,7 @@ F: drivers/i2c/busses/i2c-pasemi.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
M: Harald Welte <laforge@gnumonks.org>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
@ -4522,7 +4557,7 @@ F: drivers/net/wireless/ray*
RCUTORTURE MODULE
M: Josh Triplett <josh@freedesktop.org>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Maintained
S: Supported
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
@ -4547,11 +4582,12 @@ M: Dipankar Sarma <dipankar@in.ibm.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/rclock/
S: Supported
F: Documentation/RCU/rcu.txt
F: Documentation/RCU/rcuref.txt
F: include/linux/rcupdate.h
F: include/linux/srcu.h
F: kernel/rcupdate.c
F: Documentation/RCU/
F: include/linux/rcu*
F: include/linux/srcu*
F: kernel/rcu*
F: kernel/srcu*
X: kernel/rcutorture.c
REAL TIME CLOCK DRIVER
M: Paul Gortmaker <p_gortmaker@yahoo.com>
@ -4689,6 +4725,13 @@ F: drivers/media/common/saa7146*
F: drivers/media/video/*7146*
F: include/media/*7146*
TLG2300 VIDEO4LINUX-2 DRIVER
M: Huang Shijie <shijie8@gmail.com>
M: Kang Yong <kangyong@telegent.com>
M: Zhang Xiaobing <xbzhang@telegent.com>
S: Supported
F: drivers/media/video/tlg2300
SC1200 WDT DRIVER
M: Zwane Mwaikambo <zwane@arm.linux.org.uk>
S: Maintained
@ -5049,7 +5092,7 @@ F: include/linux/ssb/
SONY VAIO CONTROL DEVICE DRIVER
M: Mattia Dongili <malattia@linux.it>
L: linux-acpi@vger.kernel.org
L: platform-driver-x86@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
F: Documentation/laptops/sony-laptop.txt
@ -5255,6 +5298,7 @@ F: arch/xtensa/
THINKPAD ACPI EXTRAS DRIVER
M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
L: platform-driver-x86@vger.kernel.org
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
T: git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
@ -5308,10 +5352,12 @@ F: security/tomoyo/
TOPSTAR LAPTOP EXTRAS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/topstar-laptop.c
TOSHIBA ACPI EXTRAS DRIVER
L: platform-driver-x86@vger.kernel.org
S: Orphan
F: drivers/platform/x86/toshiba_acpi.c
@ -6048,6 +6094,12 @@ S: Maintained
F: Documentation/x86/
F: arch/x86/
X86 PLATFORM DRIVERS
M: Matthew Garrett <mjg@redhat.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy@xensource.com>
M: Chris Wright <chrisw@sous-sol.org>

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 33
EXTRAVERSION = -rc8
EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

26
arch/Kconfig
View File

@ -3,11 +3,9 @@
#
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
tristate "OProfile system profiling"
depends on PROFILING
depends on HAVE_OPROFILE
depends on TRACING_SUPPORT
select TRACING
select RING_BUFFER
select RING_BUFFER_ALLOW_SWAP
help
@ -17,20 +15,6 @@ config OPROFILE
If unsure, say N.
config OPROFILE_IBS
bool "OProfile AMD IBS support (EXPERIMENTAL)"
default n
depends on OPROFILE && SMP && X86
help
Instruction-Based Sampling (IBS) is a new profiling
technique that provides rich, precise program performance
information. IBS is introduced by AMD Family10h processors
(AMD Opteron Quad-Core processor "Barcelona") to overcome
the limitations of conventional performance counter
sampling.
If unsure, say N.
config OPROFILE_EVENT_MULTIPLEX
bool "OProfile multiplexing support (EXPERIMENTAL)"
default n
@ -121,6 +105,14 @@ config HAVE_DMA_ATTRS
config USE_GENERIC_SMP_HELPERS
bool
config HAVE_REGS_AND_STACK_ACCESS_API
bool
help
This symbol should be selected by an architecure if it supports
the API needed to access registers and stack entries from pt_regs,
declared in asm/ptrace.h
For example the kprobes-based event tracer needs this API.
config HAVE_CLK
bool
help

6
arch/alpha/kernel/pci.c
View File

@ -126,8 +126,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
#define MB (1024*KB)
#define GB (1024*MB)
void
pcibios_align_resource(void *data, struct resource *res,
resource_size_t
pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
@ -184,7 +184,7 @@ pcibios_align_resource(void *data, struct resource *res,
}
}
res->start = start;
return start;
}
#undef KB
#undef MB

13
arch/arm/include/asm/cacheflush.h
View File

@ -42,7 +42,8 @@
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
defined(CONFIG_CPU_ARM1026)
# define MULTI_CACHE 1
#endif
@ -446,6 +447,16 @@ static inline void __flush_icache_all(void)
: "r" (0));
#endif
}
static inline void flush_kernel_vmap_range(void *addr, int size)
{
if ((cache_is_vivt() || cache_is_vipt_aliasing()))
__cpuc_flush_dcache_area(addr, (size_t)size);
}
static inline void invalidate_kernel_vmap_range(void *addr, int size)
{
if ((cache_is_vivt() || cache_is_vipt_aliasing()))
__cpuc_flush_dcache_area(addr, (size_t)size);
}
#define ARCH_HAS_FLUSH_ANON_PAGE
static inline void flush_anon_page(struct vm_area_struct *vma,

8
arch/arm/kernel/bios32.c
View File

@ -616,15 +616,17 @@ char * __init pcibios_setup(char *str)
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might be mirrored at 0x0100-0x03ff..
*/
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO && start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
res->start = (start + align - 1) & ~(align - 1);
start = (start + align - 1) & ~(align - 1);
return start;
}
/**

1
arch/arm/kernel/setup.c
View File

@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
#endif
#ifdef CONFIG_OUTER_CACHE
struct outer_cache_fns outer_cache;
EXPORT_SYMBOL(outer_cache);
#endif
struct stack {

71
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -37,6 +37,8 @@
#include <mach/nand.h>
#include <mach/keyscan.h>
#include <media/tvp514x.h>
static inline int have_imager(void)
{
/* REVISIT when it's supported, trigger via Kconfig */
@ -306,6 +308,73 @@ static void dm365evm_mmc_configure(void)
davinci_cfg_reg(DM365_SD1_DATA0);
}
static struct tvp514x_platform_data tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
.vs_polarity = 1
};
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
/* Inputs available at the TVP5146 */
static struct v4l2_input tvp5146_inputs[] = {
{
.index = 0,
.name = "Composite",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = TVP514X_STD_ALL,
},
{
.index = 1,
.name = "S-Video",
.type = V4L2_INPUT_TYPE_CAMERA,
.std = TVP514X_STD_ALL,
},
};
/*
* this is the route info for connecting each input to decoder
* ouput that goes to vpfe. There is a one to one correspondence
* with tvp5146_inputs
*/
static struct vpfe_route tvp5146_routes[] = {
{
.input = INPUT_CVBS_VI2B,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
},
{
.input = INPUT_SVIDEO_VI2C_VI1C,
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
},
};
static struct vpfe_subdev_info vpfe_sub_devs[] = {
{
.name = "tvp5146",
.grp_id = 0,
.num_inputs = ARRAY_SIZE(tvp5146_inputs),
.inputs = tvp5146_inputs,
.routes = tvp5146_routes,
.can_route = 1,
.ccdc_if_params = {
.if_type = VPFE_BT656,
.hdpol = VPFE_PINPOL_POSITIVE,
.vdpol = VPFE_PINPOL_POSITIVE,
},
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5d),
.platform_data = &tvp5146_pdata,
},
},
};
static struct vpfe_config vpfe_cfg = {
.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
.sub_devs = vpfe_sub_devs,
.i2c_adapter_id = 1,
.card_name = "DM365 EVM",
.ccdc = "ISIF",
};
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
@ -497,6 +566,8 @@ static struct davinci_uart_config uart_config __initdata = {
static void __init dm365_evm_map_io(void)
{
/* setup input configuration for VPFE input devices */
dm365_set_vpfe_config(&vpfe_cfg);
dm365_init();
}

43
arch/arm/mach-davinci/dm355.c
View File

@ -125,7 +125,6 @@ static struct clk vpss_slave_clk = {
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
static struct clk clkout1_clk = {
.name = "clkout1",
.parent = &pll1_aux_clk,
@ -665,6 +664,17 @@ static struct platform_device dm355_asp1_device = {
.resource = dm355_asp1_resources,
};
static void dm355_ccdc_setup_pinmux(void)
{
davinci_cfg_reg(DM355_VIN_PCLK);
davinci_cfg_reg(DM355_VIN_CAM_WEN);
davinci_cfg_reg(DM355_VIN_CAM_VD);
davinci_cfg_reg(DM355_VIN_CAM_HD);
davinci_cfg_reg(DM355_VIN_YIN_EN);
davinci_cfg_reg(DM355_VIN_CINL_EN);
davinci_cfg_reg(DM355_VIN_CINH_EN);
}
static struct resource dm355_vpss_resources[] = {
{
/* VPSS BL Base address */
@ -701,6 +711,10 @@ static struct resource vpfe_resources[] = {
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct resource dm355_ccdc_resource[] = {
/* CCDC Base address */
{
.flags = IORESOURCE_MEM,
@ -708,8 +722,18 @@ static struct resource vpfe_resources[] = {
.end = 0x01c70600 + 0x1ff,
},
};
static struct platform_device dm355_ccdc_dev = {
.name = "dm355_ccdc",
.id = -1,
.num_resources = ARRAY_SIZE(dm355_ccdc_resource),
.resource = dm355_ccdc_resource,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = dm355_ccdc_setup_pinmux,
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
@ -857,20 +881,13 @@ static int __init dm355_init_devices(void)
if (!cpu_is_davinci_dm355())
return 0;
/* Add ccdc clock aliases */
clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
davinci_cfg_reg(DM355_INT_EDMA_CC);
platform_device_register(&dm355_edma_device);
platform_device_register(&dm355_vpss_device);
/*
* setup Mux configuration for vpfe input and register
* vpfe capture platform device
*/
davinci_cfg_reg(DM355_VIN_PCLK);
davinci_cfg_reg(DM355_VIN_CAM_WEN);
davinci_cfg_reg(DM355_VIN_CAM_VD);
davinci_cfg_reg(DM355_VIN_CAM_HD);
davinci_cfg_reg(DM355_VIN_YIN_EN);
davinci_cfg_reg(DM355_VIN_CINL_EN);
davinci_cfg_reg(DM355_VIN_CINH_EN);
platform_device_register(&dm355_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;

102
arch/arm/mach-davinci/dm365.c
View File

@ -1008,6 +1008,97 @@ void __init dm365_init(void)
davinci_common_init(&davinci_soc_info_dm365);
}
static struct resource dm365_vpss_resources[] = {
{
/* VPSS ISP5 Base address */
.name = "isp5",
.start = 0x01c70000,
.end = 0x01c70000 + 0xff,
.flags = IORESOURCE_MEM,
},
{
/* VPSS CLK Base address */
.name = "vpss",
.start = 0x01c70200,
.end = 0x01c70200 + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dm365_vpss_device = {
.name = "vpss",
.id = -1,
.dev.platform_data = "dm365_vpss",
.num_resources = ARRAY_SIZE(dm365_vpss_resources),
.resource = dm365_vpss_resources,
};
static struct resource vpfe_resources[] = {
{
.start = IRQ_VDINT0,
.end = IRQ_VDINT0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_VDINT1,
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(vpfe_resources),
.resource = vpfe_resources,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static void dm365_isif_setup_pinmux(void)
{
davinci_cfg_reg(DM365_VIN_CAM_WEN);
davinci_cfg_reg(DM365_VIN_CAM_VD);
davinci_cfg_reg(DM365_VIN_CAM_HD);
davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
}
static struct resource isif_resource[] = {
/* ISIF Base address */
{
.start = 0x01c71000,
.end = 0x01c71000 + 0x1ff,
.flags = IORESOURCE_MEM,
},
/* ISIF Linearization table 0 */
{
.start = 0x1C7C000,
.end = 0x1C7C000 + 0x2ff,
.flags = IORESOURCE_MEM,
},
/* ISIF Linearization table 1 */
{
.start = 0x1C7C400,
.end = 0x1C7C400 + 0x2ff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dm365_isif_dev = {
.name = "isif",
.id = -1,
.num_resources = ARRAY_SIZE(isif_resource),
.resource = isif_resource,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = dm365_isif_setup_pinmux,
},
};
static int __init dm365_init_devices(void)
{
if (!cpu_is_davinci_dm365())
@ -1016,7 +1107,16 @@ static int __init dm365_init_devices(void)
davinci_cfg_reg(DM365_INT_EDMA_CC);
platform_device_register(&dm365_edma_device);
platform_device_register(&dm365_emac_device);
/* Add isif clock alias */
clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
platform_device_register(&dm365_vpss_device);
platform_device_register(&dm365_isif_dev);
platform_device_register(&vpfe_capture_dev);
return 0;
}
postcore_initcall(dm365_init_devices);
void dm365_set_vpfe_config(struct vpfe_config *cfg)
{
vpfe_capture_dev.dev.platform_data = cfg;
}

21
arch/arm/mach-davinci/dm644x.c
View File

@ -612,6 +612,11 @@ static struct resource vpfe_resources[] = {
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct resource dm644x_ccdc_resource[] = {
/* CCDC Base address */
{
.start = 0x01c70400,
.end = 0x01c70400 + 0xff,
@ -619,7 +624,17 @@ static struct resource vpfe_resources[] = {
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device dm644x_ccdc_dev = {
.name = "dm644x_ccdc",
.id = -1,
.num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
.resource = dm644x_ccdc_resource,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
@ -769,9 +784,13 @@ static int __init dm644x_init_devices(void)
if (!cpu_is_davinci_dm644x())
return 0;
/* Add ccdc clock aliases */
clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
platform_device_register(&dm644x_edma_device);
platform_device_register(&dm644x_emac_device);
platform_device_register(&dm644x_vpss_device);
platform_device_register(&dm644x_ccdc_dev);
platform_device_register(&vpfe_capture_dev);
return 0;

2
arch/arm/mach-davinci/include/mach/dm365.h
View File

@ -18,6 +18,7 @@
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/keyscan.h>
#include <media/davinci/vpfe_capture.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
@ -36,4 +37,5 @@ void __init dm365_init_asp(struct snd_platform_data *pdata);
void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
void __init dm365_init_rtc(void);
void dm365_set_vpfe_config(struct vpfe_config *cfg);
#endif /* __ASM_ARCH_DM365_H */

4
arch/arm/mach-gemini/gpio.c
View File

@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(irq);

8
arch/arm/mach-nomadik/cpu-8815.c
View File

@ -86,11 +86,19 @@ static struct amba_device cpu8815_amba_gpio[] = {
},
};
static struct amba_device cpu8815_amba_rng = {
.dev = {
.init_name = "rng",
},
__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
};
static struct amba_device *amba_devs[] __initdata = {
cpu8815_amba_gpio + 0,
cpu8815_amba_gpio + 1,
cpu8815_amba_gpio + 2,
cpu8815_amba_gpio + 3,
&cpu8815_amba_rng
};
static int __init cpu8815_init(void)

12
arch/arm/mach-omap2/mux.c
View File

@ -961,16 +961,14 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
while (superset->reg_offset != OMAP_MUX_TERMINATOR) {
struct omap_mux *entry;
#ifndef CONFIG_OMAP_MUX
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
#ifdef CONFIG_OMAP_MUX
if (!superset->muxnames || !superset->muxnames[0]) {
superset++;
continue;
}
#endif
#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
if (!superset->muxnames || !superset->muxnames[0]) {
#else
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
superset++;
continue;
}

2
arch/arm/mach-pxa/include/mach/camera.h
View File

@ -35,8 +35,6 @@
#define PXA_CAMERA_VSP 0x400
struct pxacamera_platform_data {
int (*init)(struct device *);
unsigned long flags;
unsigned long mclk_10khz;
};

3
arch/arm/mm/alignment.c
View File

@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/moduleparam.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@ -77,6 +78,8 @@ static unsigned long ai_dword;
static unsigned long ai_multi;
static int ai_usermode;
core_param(alignment, ai_usermode, int, 0600);
#define UM_WARN (1 << 0)
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)

46
arch/arm/tools/mach-types
View File

@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Thu Jan 28 22:15:54 2010
# Last update: Sat Feb 20 14:16:15 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@ -2257,7 +2257,7 @@ oratisalog MACH_ORATISALOG ORATISALOG 2268
oratismadi MACH_ORATISMADI ORATISMADI 2269
oratisot16 MACH_ORATISOT16 ORATISOT16 2270
oratisdesk MACH_ORATISDESK ORATISDESK 2271
v2_ca9 MACH_V2P_CA9 V2P_CA9 2272
vexpress MACH_VEXPRESS VEXPRESS 2272
sintexo MACH_SINTEXO SINTEXO 2273
cm3389 MACH_CM3389 CM3389 2274
omap3_cio MACH_OMAP3_CIO OMAP3_CIO 2275
@ -2636,3 +2636,45 @@ hw90240 MACH_HW90240 HW90240 2648
dm365_leopard MACH_DM365_LEOPARD DM365_LEOPARD 2649
mityomapl138 MACH_MITYOMAPL138 MITYOMAPL138 2650
scat110 MACH_SCAT110 SCAT110 2651
acer_a1 MACH_ACER_A1 ACER_A1 2652
cmcontrol MACH_CMCONTROL CMCONTROL 2653
pelco_lamar MACH_PELCO_LAMAR PELCO_LAMAR 2654
rfp43 MACH_RFP43 RFP43 2655
sk86r0301 MACH_SK86R0301 SK86R0301 2656
ctpxa MACH_CTPXA CTPXA 2657
epb_arm9_a MACH_EPB_ARM9_A EPB_ARM9_A 2658
guruplug MACH_GURUPLUG GURUPLUG 2659
spear310 MACH_SPEAR310 SPEAR310 2660
spear320 MACH_SPEAR320 SPEAR320 2661
robotx MACH_ROBOTX ROBOTX 2662
lsxhl MACH_LSXHL LSXHL 2663
smartlite MACH_SMARTLITE SMARTLITE 2664
cws2 MACH_CWS2 CWS2 2665
m619 MACH_M619 M619 2666
smartview MACH_SMARTVIEW SMARTVIEW 2667
lsa_salsa MACH_LSA_SALSA LSA_SALSA 2668
kizbox MACH_KIZBOX KIZBOX 2669
htccharmer MACH_HTCCHARMER HTCCHARMER 2670
guf_neso_lt MACH_GUF_NESO_LT GUF_NESO_LT 2671
pm9g45 MACH_PM9G45 PM9G45 2672
htcpanther MACH_HTCPANTHER HTCPANTHER 2673
htcpanther_cdma MACH_HTCPANTHER_CDMA HTCPANTHER_CDMA 2674
reb01 MACH_REB01 REB01 2675
aquila MACH_AQUILA AQUILA 2676
spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
surf7x30 MACH_SURF7X30 SURF7X30 2679
micro2440 MACH_MICRO2440 MICRO2440 2680
am2440 MACH_AM2440 AM2440 2681
tq2440 MACH_TQ2440 TQ2440 2682
lpc2478oem MACH_LPC2478OEM LPC2478OEM 2683
ak880x MACH_AK880X AK880X 2684
cobra3530 MACH_COBRA3530 COBRA3530 2685
pmppb MACH_PMPPB PMPPB 2686
u6715 MACH_U6715 U6715 2687
axar1500_sender MACH_AXAR1500_SENDER AXAR1500_SENDER 2688
g30_dvb MACH_G30_DVB G30_DVB 2689
vc088x MACH_VC088X VC088X 2690
mioa702 MACH_MIOA702 MIOA702 2691
hpmin MACH_HPMIN HPMIN 2692
ak880xak MACH_AK880XAK AK880XAK 2693

16
arch/cris/arch-v32/drivers/pci/bios.c
View File

@ -41,18 +41,16 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
return 0;
}
void
pcibios_align_resource(void *data, struct resource *res,
resource_size_t
pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
if (res->flags & IORESOURCE_IO) {
resource_size_t start = res->start;
resource_size_t start = res->start;
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
}
if ((res->flags & IORESOURCE_IO) && (start & 0x300))
start = (start + 0x3ff) & ~0x3ff;
return start
}
int pcibios_enable_resources(struct pci_dev *dev, int mask)

16
arch/frv/mb93090-mb00/pci-frv.c
View File

@ -32,18 +32,16 @@
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
void
pcibios_align_resource(void *data, struct resource *res,
resource_size_t
pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
if (res->flags & IORESOURCE_IO) {
resource_size_t start = res->start;
resource_size_t start = res->start;
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
}
if ((res->flags & IORESOURCE_IO) && (start & 0x300))
start = (start + 0x3ff) & ~0x3ff;
return start
}

4
arch/h8300/mm/memory.c
View File

@ -44,8 +44,8 @@ void cache_push_v (unsigned long vaddr, int len)
{
}
/* Map some physical address range into the kernel address space. The
* code is copied and adapted from map_chunk().
/*
* Map some physical address range into the kernel address space.
*/
unsigned long kernel_map(unsigned long paddr, unsigned long size,

2
arch/ia64/include/asm/acpi.h
View File

@ -94,9 +94,11 @@ ia64_acpi_release_global_lock (unsigned int *lock)
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
static inline void pci_acpi_crs_quirks(void) { }
const char *acpi_get_sysname (void);
int acpi_request_vector (u32 int_type);

2
arch/ia64/kernel/kprobes.c
View File

@ -870,7 +870,7 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
return 1;
ss_probe:
#if !defined(CONFIG_PREEMPT) || defined(CONFIG_FREEZER)
#if !defined(CONFIG_PREEMPT)
if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
/* Boost up -- we can execute copied instructions directly */
ia64_psr(regs)->ri = p->ainsn.slot;

22
arch/ia64/pci/pci.c
View File

@ -320,9 +320,9 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data)
static void __devinit
pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
{
int i, j;
int i;
j = 0;
pci_bus_remove_resources(bus);
for (i = 0; i < ctrl->windows; i++) {
struct resource *res = &ctrl->window[i].resource;
/* HP's firmware has a hack to work around a Windows bug.
@ -330,13 +330,7 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
if ((res->flags & IORESOURCE_MEM) &&
(res->end - res->start < 16))
continue;
if (j >= PCI_BUS_NUM_RESOURCES) {
dev_warn(&bus->dev,
"ignoring host bridge window %pR (no space)\n",
res);
continue;
}
bus->resource[j++] = res;
pci_bus_add_resource(bus, res, 0);
}
}
@ -452,13 +446,12 @@ EXPORT_SYMBOL(pcibios_bus_to_resource);
static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
{
unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
struct resource *devr = &dev->resource[idx];
struct resource *devr = &dev->resource[idx], *busr;
if (!dev->bus)
return 0;
for (i=0; i<PCI_BUS_NUM_RESOURCES; i++) {
struct resource *busr = dev->bus->resource[i];
pci_bus_for_each_resource(dev->bus, busr, i) {
if (!busr || ((busr->flags ^ devr->flags) & type_mask))
continue;
if ((devr->start) && (devr->start >= busr->start) &&
@ -547,10 +540,11 @@ pcibios_disable_device (struct pci_dev *dev)
acpi_pci_irq_disable(dev);
}
void
pcibios_align_resource (void *data, struct resource *res,
resource_size_t
pcibios_align_resource (void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
/*

2
arch/ia64/sn/kernel/setup.c
View File

@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);

6
arch/m68k/Kconfig
View File

@ -536,10 +536,6 @@ config GVPIOEXT_PLIP
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MAC_SCC
tristate "Macintosh serial support"
depends on MAC
config MAC_HID
bool
depends on INPUT_ADBHID
@ -595,7 +591,7 @@ config DN_SERIAL
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all

2
arch/m68k/amiga/config.c
View File

@ -480,7 +480,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
static struct resource sched_res = {
.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
};
jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
if (request_resource(&mb_resources._ciab, &sched_res))
printk("Cannot allocate ciab.ta{lo,hi}\n");

7
arch/m68k/configs/mac_defconfig
View File

@ -701,6 +701,11 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@ -834,9 +839,7 @@ CONFIG_HIDRAW=y
#
# Character devices
#
CONFIG_MAC_SCC=y
CONFIG_MAC_HID=y
CONFIG_SERIAL_CONSOLE=y
#
# File systems

6
arch/m68k/configs/multi_defconfig
View File

@ -822,6 +822,11 @@ CONFIG_A2232=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_PMACZILOG=y
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_SERIAL_PMACZILOG_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@ -982,7 +987,6 @@ CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
CONFIG_MAC_SCC=y
CONFIG_MAC_HID=y
CONFIG_MVME147_SCC=y
CONFIG_SERIAL167=y

25
arch/m68k/include/asm/machw.h
View File

@ -21,29 +21,4 @@
#define VIDEOMEMSIZE (4096*1024)
#define VIDEOMEMMASK (-4096*1024)
#ifndef __ASSEMBLY__
#include <linux/types.h>
#if 0
/*
** SCC Z8530
*/
#define MAC_SCC_BAS (0x50F04000)
struct MAC_SCC
{
u_char cha_a_ctrl;
u_char char_dummy1;
u_char cha_a_data;
u_char char_dummy2;
u_char cha_b_ctrl;
u_char char_dummy3;
u_char cha_b_data;
};
# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
#endif
#endif /* __ASSEMBLY__ */
#endif /* linux/machw.h */

22
arch/m68k/include/asm/macints.h
View File

@ -37,7 +37,6 @@
#define VIA1_SOURCE_BASE 8
#define VIA2_SOURCE_BASE 16
#define MAC_SCC_SOURCE_BASE 24
#define PSC3_SOURCE_BASE 24
#define PSC4_SOURCE_BASE 32
#define PSC5_SOURCE_BASE 40
@ -96,26 +95,12 @@
#define IRQ_PSC3_2 (26)
#define IRQ_PSC3_3 (27)
/* Level 4 (SCC) interrupts */
#define IRQ_SCC (32)
#define IRQ_SCCA (33)
#define IRQ_SCCB (34)
#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
/* SCC interrupts */
#define IRQ_SCCB_TX (32)
#define IRQ_SCCB_STAT (33)
#define IRQ_SCCB_RX (34)
#define IRQ_SCCB_SPCOND (35)
#define IRQ_SCCA_TX (36)
#define IRQ_SCCA_STAT (37)
#define IRQ_SCCA_RX (38)
#define IRQ_SCCA_SPCOND (39)
#endif
/* Level 4 (PSC, AV Macs only) interrupts */
#define IRQ_PSC4_0 (32)
#define IRQ_PSC4_1 (33)
#define IRQ_MAC_SCC_A IRQ_PSC4_1
#define IRQ_PSC4_2 (34)
#define IRQ_MAC_SCC_B IRQ_PSC4_2
#define IRQ_PSC4_3 (35)
#define IRQ_MAC_MACE_DMA IRQ_PSC4_3
@ -146,6 +131,9 @@
#define IRQ_BABOON_2 (66)
#define IRQ_BABOON_3 (67)
/* On non-PSC machines, the serial ports share an IRQ */
#define IRQ_MAC_SCC IRQ_AUTO_4
#define SLOT2IRQ(x) (x + 47)
#define IRQ2SLOT(x) (x - 47)

2
arch/m68k/include/asm/ptrace.h
View File

@ -71,6 +71,8 @@ struct switch_stack {
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
#define PTRACE_GET_THREAD_AREA 25
#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */
#ifdef __KERNEL__

6
arch/m68k/include/asm/sigcontext.h
View File

@ -15,9 +15,15 @@ struct sigcontext {
unsigned long sc_pc;
unsigned short sc_formatvec;
#ifndef __uClinux__
# ifdef __mcoldfire__
unsigned long sc_fpregs[2][2]; /* room for two fp registers */
unsigned long sc_fpcntl[3];
unsigned char sc_fpstate[16+6*8];
# else
unsigned long sc_fpregs[2*3]; /* room for two fp registers */
unsigned long sc_fpcntl[3];
unsigned char sc_fpstate[216];
# endif
#endif
};

91
arch/m68k/include/asm/siginfo.h
View File

@ -1,97 +1,6 @@
#ifndef _M68K_SIGINFO_H
#define _M68K_SIGINFO_H
#ifndef __uClinux__
#define HAVE_ARCH_SIGINFO_T
#define HAVE_ARCH_COPY_SIGINFO
#endif
#include <asm-generic/siginfo.h>
#ifndef __uClinux__
typedef struct siginfo {
int si_signo;
int si_errno;
int si_code;
union {
int _pad[SI_PAD_SIZE];
/* kill() */
struct {
__kernel_pid_t _pid; /* sender's pid */
__kernel_uid_t _uid; /* backwards compatibility */
__kernel_uid32_t _uid32; /* sender's uid */
} _kill;
/* POSIX.1b timers */
struct {
timer_t _tid; /* timer id */
int _overrun; /* overrun count */
char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
sigval_t _sigval; /* same as below */
int _sys_private; /* not to be passed to user */
} _timer;
/* POSIX.1b signals */
struct {
__kernel_pid_t _pid; /* sender's pid */
__kernel_uid_t _uid; /* backwards compatibility */
sigval_t _sigval;
__kernel_uid32_t _uid32; /* sender's uid */
} _rt;
/* SIGCHLD */
struct {
__kernel_pid_t _pid; /* which child */
__kernel_uid_t _uid; /* backwards compatibility */
int _status; /* exit code */
clock_t _utime;
clock_t _stime;
__kernel_uid32_t _uid32; /* sender's uid */
} _sigchld;
/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
struct {
void *_addr; /* faulting insn/memory ref. */
} _sigfault;
/* SIGPOLL */
struct {
int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
} _sifields;
} siginfo_t;
#define UID16_SIGINFO_COMPAT_NEEDED
/*
* How these fields are to be accessed.
*/
#undef si_uid
#ifdef __KERNEL__
#define si_uid _sifields._kill._uid32
#define si_uid16 _sifields._kill._uid
#else
#define si_uid _sifields._kill._uid
#endif
#ifdef __KERNEL__
#include <linux/string.h>
static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
{
if (from->si_code < 0)
memcpy(to, from, sizeof(*to));
else
/* _sigchld is currently the largest know union member */
memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
}
#endif /* __KERNEL__ */
#endif /* !__uClinux__ */
#endif

2
arch/m68k/include/asm/swab.h
View File

@ -14,7 +14,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
}
#define __arch_swab32 __arch_swab32
#elif !defined(__uClinux__)
#elif !defined(__mcoldfire__)
static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
{

1
arch/m68k/include/asm/thread_info_mm.h
View File

@ -16,6 +16,7 @@ struct thread_info {
struct exec_domain *exec_domain; /* execution domain */
int preempt_count; /* 0 => preemptable, <0 => BUG */
__u32 cpu; /* should always be 0 on m68k */
unsigned long tp_value; /* thread pointer */
struct restart_block restart_block;
};
#endif /* __ASSEMBLY__ */

1
arch/m68k/include/asm/thread_info_no.h
View File

@ -37,6 +37,7 @@ struct thread_info {
unsigned long flags; /* low level flags */
int cpu; /* cpu we're on */
int preempt_count; /* 0 => preemptable, <0 => BUG */
unsigned long tp_value; /* thread pointer */
struct restart_block restart_block;
};

4
arch/m68k/include/asm/ucontext.h
View File

@ -7,7 +7,11 @@ typedef greg_t gregset_t[NGREG];
typedef struct fpregset {
int f_fpcntl[3];
#ifdef __mcoldfire__
int f_fpregs[8][2];
#else
int f_fpregs[8*3];
#endif
} fpregset_t;
struct mcontext {

6
arch/m68k/include/asm/unistd.h
View File

@ -336,10 +336,14 @@
#define __NR_pwritev 330
#define __NR_rt_tgsigqueueinfo 331
#define __NR_perf_event_open 332
#define __NR_get_thread_area 333
#define __NR_set_thread_area 334
#define __NR_atomic_cmpxchg_32 335
#define __NR_atomic_barrier 336
#ifdef __KERNEL__
#define NR_syscalls 333
#define NR_syscalls 337
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR

7
arch/m68k/include/asm/virtconvert.h
View File

@ -31,12 +31,7 @@ static inline void *phys_to_virt(unsigned long address)
#define page_to_phys(page) \
__pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
#else
#define page_to_phys(_page) ({ \
struct page *__page = _page; \
struct pglist_data *pgdat; \
pgdat = pg_data_table[page_to_nid(__page)]; \
page_to_pfn(__page) << PAGE_SHIFT; \
})
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
#endif
#else
#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)

4
arch/m68k/kernel/entry.S
View File

@ -761,4 +761,8 @@ sys_call_table:
.long sys_pwritev /* 330 */
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
.long sys_get_thread_area
.long sys_set_thread_area
.long sys_atomic_cmpxchg_32 /* 335 */
.long sys_atomic_barrier

4
arch/m68k/kernel/process.c
View File

@ -251,6 +251,10 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96

5
arch/m68k/kernel/ptrace.c
View File

@ -245,6 +245,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
ret = -EFAULT;
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value,
(unsigned long __user *)data);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;

7
arch/m68k/kernel/signal.c
View File

@ -897,10 +897,17 @@ static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info,
/* Set up to return from userspace. */
err |= __put_user(frame->retcode, &frame->pretcode);
#ifdef __mcoldfire__
/* movel #__NR_rt_sigreturn,d0; trap #0 */
err |= __put_user(0x203c0000, (long __user *)(frame->retcode + 0));
err |= __put_user(0x00004e40 + (__NR_rt_sigreturn << 16),
(long __user *)(frame->retcode + 4));
#else
/* moveq #,d0; notb d0; trap #0 */
err |= __put_user(0x70004600 + ((__NR_rt_sigreturn ^ 0xff) << 16),
(long __user *)(frame->retcode + 0));
err |= __put_user(0x4e40, (short __user *)(frame->retcode + 4));
#endif
if (err)
goto give_sigsegv;

81
arch/m68k/kernel/sys_m68k.c
View File

@ -28,6 +28,11 @@
#include <asm/traps.h>
#include <asm/page.h>
#include <asm/unistd.h>
#include <linux/elf.h>
#include <asm/tlb.h>
asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code);
asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags,
@ -595,3 +600,79 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
: "d" (__a), "d" (__b), "d" (__c));
return __res;
}
asmlinkage unsigned long sys_get_thread_area(void)
{
return current_thread_info()->tp_value;
}
asmlinkage int sys_set_thread_area(unsigned long tp)
{
current_thread_info()->tp_value = tp;
return 0;
}
/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
D1 (newval). */
asmlinkage int
sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
unsigned long __user * mem)
{
/* This was borrowed from ARM's implementation. */
for (;;) {
struct mm_struct *mm = current->mm;
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
spinlock_t *ptl;
unsigned long mem_value;
down_read(&mm->mmap_sem);
pgd = pgd_offset(mm, (unsigned long)mem);
if (!pgd_present(*pgd))
goto bad_access;
pmd = pmd_offset(pgd, (unsigned long)mem);
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl);
if (!pte_present(*pte) || !pte_dirty(*pte)
|| !pte_write(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
mem_value = *mem;
if (mem_value == oldval)
*mem = newval;
pte_unmap_unlock(pte, ptl);
up_read(&mm->mmap_sem);
return mem_value;
bad_access:
up_read(&mm->mmap_sem);
/* This is not necessarily a bad access, we can get here if
a memory we're trying to write to should be copied-on-write.
Make the kernel do the necessary page stuff, then re-iterate.
Simulate a write access fault to do that. */
{
/* The first argument of the function corresponds to
D1, which is the first field of struct pt_regs. */
struct pt_regs *fp = (struct pt_regs *)&newval;
/* '3' is an RMW flag. */
if (do_page_fault(fp, (unsigned long)mem, 3))
/* If the do_page_fault() failed, we don't
have anything meaningful to return.
There should be a SIGSEGV pending for
the process. */
return 0xdeadbeef;
}
}
}
asmlinkage int sys_atomic_barrier(void)
{
/* no code needed for uniprocs */
return 0;
}

2
arch/m68k/mac/Makefile
View File

@ -3,4 +3,4 @@
#
obj-y := config.o macints.o iop.o via.o oss.o psc.o \
baboon.o macboing.o debug.o misc.o
baboon.o macboing.o misc.o

344
arch/m68k/mac/config.c
View File

@ -23,6 +23,8 @@
#include <linux/init.h>
#include <linux/vt_kern.h>
#include <linux/platform_device.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#define BOOTINFO_COMPAT_1_0
#include <asm/setup.h>
@ -44,12 +46,7 @@
#include <asm/mac_oss.h>
#include <asm/mac_psc.h>
/* platform device info */
#define SWIM_IO_SIZE 0x2000 /* SWIM IO resource size */
/* Mac bootinfo struct */
struct mac_booter_data mac_bi_data;
/* The phys. video addr. - might be bogus on some machines */
@ -70,8 +67,6 @@ extern void baboon_init(void);
extern void mac_mksound(unsigned int, unsigned int);
extern void nubus_sweep_video(void);
static void mac_get_model(char *str);
static void mac_identify(void);
static void mac_report_hardware(void);
@ -167,12 +162,6 @@ void __init config_mac(void)
mach_max_dma_address = 0xffffffff;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = mac_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
#if 0
mach_heartbeat = mac_heartbeat;
mach_heartbeat_irq = IRQ_MAC_TIMER;
#endif
#endif
/*
@ -191,27 +180,19 @@ void __init config_mac(void)
if (macintosh_config->ident == MAC_MODEL_IICI
|| macintosh_config->ident == MAC_MODEL_IIFX)
mach_l2_flush = mac_cache_card_flush;
/*
* Check for machine specific fixups.
*/
#ifdef OLD_NUBUS_CODE
nubus_sweep_video();
#endif
}
/*
* Macintosh Table: hardcoded model configuration data.
* Macintosh Table: hardcoded model configuration data.
*
* Much of this was defined by Alan, based on who knows what docs.
* I've added a lot more, and some of that was pure guesswork based
* on hardware pages present on the Mac web site. Possibly wildly
* inaccurate, so look here if a new Mac model won't run. Example: if
* a Mac crashes immediately after the VIA1 registers have been dumped
* to the screen, it probably died attempting to read DirB on a RBV.
* Meaning it should have MAC_VIA_IIci here :-)
* Much of this was defined by Alan, based on who knows what docs.
* I've added a lot more, and some of that was pure guesswork based
* on hardware pages present on the Mac web site. Possibly wildly
* inaccurate, so look here if a new Mac model won't run. Example: if
* a Mac crashes immediately after the VIA1 registers have been dumped
* to the screen, it probably died attempting to read DirB on a RBV.
* Meaning it should have MAC_VIA_IIci here :-)
*/
struct mac_model *macintosh_config;
@ -219,7 +200,7 @@ EXPORT_SYMBOL(macintosh_config);
static struct mac_model mac_data_table[] = {
/*
* We'll pretend to be a Macintosh II, that's pretty safe.
* We'll pretend to be a Macintosh II, that's pretty safe.
*/
{
@ -230,12 +211,11 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_IWM
.floppy_type = MAC_FLOPPY_IWM,
},
/*
* Original MacII hardware
*
* Original Mac II hardware
*/
{
@ -246,7 +226,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_IWM
.floppy_type = MAC_FLOPPY_IWM,
}, {
.ident = MAC_MODEL_IIX,
.name = "IIx",
@ -255,7 +235,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_IICX,
.name = "IIcx",
@ -264,7 +244,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_SE30,
.name = "SE/30",
@ -273,13 +253,13 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Weirdified MacII hardware - all subtly different. Gee thanks
* Apple. All these boxes seem to have VIA2 in a different place to
* the MacII (+1A000 rather than +4000)
* Weirdified Mac II hardware - all subtly different. Gee thanks
* Apple. All these boxes seem to have VIA2 in a different place to
* the Mac II (+1A000 rather than +4000)
* CSA: see http://developer.apple.com/technotes/hw/hw_09.html
*/
@ -291,7 +271,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_IIFX,
.name = "IIfx",
@ -300,7 +280,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_IOP,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_IOP
.floppy_type = MAC_FLOPPY_SWIM_IOP,
}, {
.ident = MAC_MODEL_IISI,
.name = "IIsi",
@ -309,7 +289,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_IIVI,
.name = "IIvi",
@ -318,7 +298,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_IIVX,
.name = "IIvx",
@ -327,11 +307,11 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Classic models (guessing: similar to SE/30 ?? Nope, similar to LC ...)
* Classic models (guessing: similar to SE/30? Nope, similar to LC...)
*/
{
@ -342,7 +322,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_CCL,
.name = "Color Classic",
@ -351,11 +331,11 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
* Some Mac LC machines. Basically the same as the IIci, ADB like IIsi
*/
{
@ -366,7 +346,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_LCII,
.name = "LC II",
@ -375,7 +355,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_LCIII,
.name = "LC III",
@ -384,17 +364,17 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Quadra. Video is at 0xF9000000, via is like a MacII. We label it differently
* as some of the stuff connected to VIA2 seems different. Better SCSI chip and
* onboard ethernet using a NatSemi SONIC except the 660AV and 840AV which use an
* AMD 79C940 (MACE).
* The 700, 900 and 950 have some I/O chips in the wrong place to
* confuse us. The 840AV has a SCSI location of its own (same as
* the 660AV).
* Quadra. Video is at 0xF9000000, via is like a MacII. We label it
* differently as some of the stuff connected to VIA2 seems different.
* Better SCSI chip and onboard ethernet using a NatSemi SONIC except
* the 660AV and 840AV which use an AMD 79C940 (MACE).
* The 700, 900 and 950 have some I/O chips in the wrong place to
* confuse us. The 840AV has a SCSI location of its own (same as
* the 660AV).
*/
{
@ -405,7 +385,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_QUADRA,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q605_ACC,
.name = "Quadra 605",
@ -414,7 +394,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_QUADRA,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q610,
.name = "Quadra 610",
@ -424,7 +404,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q630,
.name = "Quadra 630",
@ -435,7 +415,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q650,
.name = "Quadra 650",
@ -445,9 +425,9 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
},
/* The Q700 does have a NS Sonic */
/* The Q700 does have a NS Sonic */
{
.ident = MAC_MODEL_Q700,
.name = "Quadra 700",
@ -457,7 +437,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q800,
.name = "Quadra 800",
@ -467,7 +447,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_Q840,
.name = "Quadra 840AV",
@ -477,7 +457,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_PSC,
.ether_type = MAC_ETHER_MACE,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_AV
.floppy_type = MAC_FLOPPY_AV,
}, {
.ident = MAC_MODEL_Q900,
.name = "Quadra 900",
@ -487,7 +467,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_IOP,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_IOP
.floppy_type = MAC_FLOPPY_SWIM_IOP,
}, {
.ident = MAC_MODEL_Q950,
.name = "Quadra 950",
@ -497,60 +477,60 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_IOP,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_IOP
.floppy_type = MAC_FLOPPY_SWIM_IOP,
},
/*
* Performa - more LC type machines
* Performa - more LC type machines
*/
{
.ident = MAC_MODEL_P460,
.name = "Performa 460",
.name = "Performa 460",
.adb_type = MAC_ADB_IISI,
.via_type = MAC_VIA_IIci,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_P475,
.name = "Performa 475",
.name = "Performa 475",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_QUADRA,
.scsi_type = MAC_SCSI_QUADRA,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_P475F,
.name = "Performa 475",
.name = "Performa 475",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_QUADRA,
.scsi_type = MAC_SCSI_QUADRA,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_P520,
.name = "Performa 520",
.name = "Performa 520",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IIci,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_P550,
.name = "Performa 550",
.name = "Performa 550",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IIci,
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/* These have the comm slot, and therefore the possibility of SONIC ethernet */
/* These have the comm slot, and therefore possibly SONIC ethernet */
{
.ident = MAC_MODEL_P575,
.name = "Performa 575",
@ -560,7 +540,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_II,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_P588,
.name = "Performa 588",
@ -571,7 +551,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_II,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_TV,
.name = "TV",
@ -580,7 +560,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_P600,
.name = "Performa 600",
@ -589,14 +569,14 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Centris - just guessing again; maybe like Quadra
* Centris - just guessing again; maybe like Quadra.
* The C610 may or may not have SONIC. We probe to make sure.
*/
/* The C610 may or may not have SONIC. We probe to make sure */
{
.ident = MAC_MODEL_C610,
.name = "Centris 610",
@ -606,7 +586,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_C650,
.name = "Centris 650",
@ -616,7 +596,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR1
.floppy_type = MAC_FLOPPY_SWIM_ADDR1,
}, {
.ident = MAC_MODEL_C660,
.name = "Centris 660AV",
@ -626,7 +606,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_PSC,
.ether_type = MAC_ETHER_MACE,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_AV
.floppy_type = MAC_FLOPPY_AV,
},
/*
@ -643,7 +623,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB145,
.name = "PowerBook 145",
@ -652,7 +632,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB150,
.name = "PowerBook 150",
@ -662,7 +642,7 @@ static struct mac_model mac_data_table[] = {
.ide_type = MAC_IDE_PB,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB160,
.name = "PowerBook 160",
@ -671,7 +651,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB165,
.name = "PowerBook 165",
@ -680,7 +660,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB165C,
.name = "PowerBook 165c",
@ -689,7 +669,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB170,
.name = "PowerBook 170",
@ -698,7 +678,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB180,
.name = "PowerBook 180",
@ -707,7 +687,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB180C,
.name = "PowerBook 180c",
@ -716,7 +696,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB190,
.name = "PowerBook 190",
@ -726,7 +706,7 @@ static struct mac_model mac_data_table[] = {
.ide_type = MAC_IDE_BABOON,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB520,
.name = "PowerBook 520",
@ -736,7 +716,7 @@ static struct mac_model mac_data_table[] = {
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
@ -757,7 +737,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB230,
.name = "PowerBook Duo 230",
@ -766,7 +746,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB250,
.name = "PowerBook Duo 250",
@ -775,7 +755,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB270C,
.name = "PowerBook Duo 270c",
@ -784,7 +764,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB280,
.name = "PowerBook Duo 280",
@ -793,7 +773,7 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
}, {
.ident = MAC_MODEL_PB280C,
.name = "PowerBook Duo 280c",
@ -802,17 +782,44 @@ static struct mac_model mac_data_table[] = {
.scsi_type = MAC_SCSI_OLD,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
},
/*
* Other stuff ??
* Other stuff?
*/
{
.ident = -1
}
};
static struct resource scc_a_rsrcs[] = {
{ .flags = IORESOURCE_MEM },
{ .flags = IORESOURCE_IRQ },
};
static struct resource scc_b_rsrcs[] = {
{ .flags = IORESOURCE_MEM },
{ .flags = IORESOURCE_IRQ },
};
struct platform_device scc_a_pdev = {
.name = "scc",
.id = 0,
.num_resources = ARRAY_SIZE(scc_a_rsrcs),
.resource = scc_a_rsrcs,
};
EXPORT_SYMBOL(scc_a_pdev);
struct platform_device scc_b_pdev = {
.name = "scc",
.id = 1,
.num_resources = ARRAY_SIZE(scc_b_rsrcs),
.resource = scc_b_rsrcs,
};
EXPORT_SYMBOL(scc_b_pdev);
static void __init mac_identify(void)
{
struct mac_model *m;
@ -823,7 +830,8 @@ static void __init mac_identify(void)
/* no bootinfo model id -> NetBSD booter was used! */
/* XXX FIXME: breaks for model > 31 */
model = (mac_bi_data.cpuid >> 2) & 63;
printk(KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
printk(KERN_WARNING "No bootinfo model ID, using cpuid instead "
"(obsolete bootloader?)\n");
}
macintosh_config = mac_data_table;
@ -834,10 +842,29 @@ static void __init mac_identify(void)
}
}
/* We need to pre-init the IOPs, if any. Otherwise */
/* the serial console won't work if the user had */
/* the serial ports set to "Faster" mode in MacOS. */
/* Set up serial port resources for the console initcall. */
scc_a_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase + 2;
scc_a_rsrcs[0].end = scc_a_rsrcs[0].start;
scc_b_rsrcs[0].start = (resource_size_t) mac_bi_data.sccbase;
scc_b_rsrcs[0].end = scc_b_rsrcs[0].start;
switch (macintosh_config->scc_type) {
case MAC_SCC_PSC:
scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC_A;
scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B;
break;
default:
scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC;
scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC;
break;
}
/*
* We need to pre-init the IOPs, if any. Otherwise
* the serial console won't work if the user had
* the serial ports set to "Faster" mode in MacOS.
*/
iop_preinit();
printk(KERN_INFO "Detected Macintosh model: %d \n", model);
@ -846,7 +873,8 @@ static void __init mac_identify(void)
* Report booter data:
*/
printk(KERN_DEBUG " Penguin bootinfo data:\n");
printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
printk(KERN_DEBUG " Video: addr 0x%lx "
"row 0x%lx depth %lx dimensions %ld x %ld\n",
mac_bi_data.videoaddr, mac_bi_data.videorow,
mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
mac_bi_data.dimensions >> 16);
@ -863,6 +891,10 @@ static void __init mac_identify(void)
oss_init();
psc_init();
baboon_init();
#ifdef CONFIG_ADB_CUDA
find_via_cuda();
#endif
}
static void __init mac_report_hardware(void)
@ -876,23 +908,50 @@ static void mac_get_model(char *str)
strcat(str, macintosh_config->name);
}
static struct resource swim_resources[1];
static struct resource swim_rsrc = { .flags = IORESOURCE_MEM };
static struct platform_device swim_device = {
static struct platform_device swim_pdev = {
.name = "swim",
.id = -1,
.num_resources = ARRAY_SIZE(swim_resources),
.resource = swim_resources,
.num_resources = 1,
.resource = &swim_rsrc,
};
static struct platform_device *mac_platform_devices[] __initdata = {
&swim_device
static struct platform_device esp_0_pdev = {
.name = "mac_esp",
.id = 0,
};
static struct platform_device esp_1_pdev = {
.name = "mac_esp",
.id = 1,
};
static struct platform_device sonic_pdev = {
.name = "macsonic",
.id = -1,
};
static struct platform_device mace_pdev = {
.name = "macmace",
.id = -1,
};
int __init mac_platform_init(void)
{
u8 *swim_base;
/*
* Serial devices
*/
platform_device_register(&scc_a_pdev);
platform_device_register(&scc_b_pdev);
/*
* Floppy device
*/
switch (macintosh_config->floppy_type) {
case MAC_FLOPPY_SWIM_ADDR1:
swim_base = (u8 *)(VIA1_BASE + 0x1E000);
@ -901,16 +960,47 @@ int __init mac_platform_init(void)
swim_base = (u8 *)(VIA1_BASE + 0x16000);
break;
default:
return 0;
swim_base = NULL;
break;
}
swim_resources[0].name = "swim-regs";
swim_resources[0].start = (resource_size_t)swim_base;
swim_resources[0].end = (resource_size_t)(swim_base + SWIM_IO_SIZE);
swim_resources[0].flags = IORESOURCE_MEM;
if (swim_base) {
swim_rsrc.start = (resource_size_t) swim_base,
swim_rsrc.end = (resource_size_t) swim_base + 0x2000,
platform_device_register(&swim_pdev);
}
return platform_add_devices(mac_platform_devices,
ARRAY_SIZE(mac_platform_devices));
/*
* SCSI device(s)
*/
switch (macintosh_config->scsi_type) {
case MAC_SCSI_QUADRA:
case MAC_SCSI_QUADRA3:
platform_device_register(&esp_0_pdev);
break;
case MAC_SCSI_QUADRA2:
platform_device_register(&esp_0_pdev);
if ((macintosh_config->ident == MAC_MODEL_Q900) ||
(macintosh_config->ident == MAC_MODEL_Q950))
platform_device_register(&esp_1_pdev);
break;
}
/*
* Ethernet device
*/
switch (macintosh_config->ether_type) {
case MAC_ETHER_SONIC:
platform_device_register(&sonic_pdev);
break;
case MAC_ETHER_MACE:
platform_device_register(&mace_pdev);
break;
}
return 0;
}
arch_initcall(mac_platform_init);

365
arch/m68k/mac/debug.c
View File

@ -1,365 +0,0 @@
/*
* linux/arch/m68k/mac/debug.c
*
* Shamelessly stolen (SCC code and general framework) from:
*
* linux/arch/m68k/atari/debug.c
*
* Atari debugging and serial console stuff
*
* Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/delay.h>
#define BOOTINFO_COMPAT_1_0
#include <asm/setup.h>
#include <asm/bootinfo.h>
#include <asm/macints.h>
extern unsigned long mac_videobase;
extern unsigned long mac_rowbytes;
extern void mac_serial_print(const char *);
#define DEBUG_HEADS
#undef DEBUG_SCREEN
#define DEBUG_SERIAL
/*
* These two auxiliary debug functions should go away ASAP. Only usage:
* before the console output is up (after head.S come some other crucial
* setup routines :-) it permits writing 'data' to the screen as bit patterns
* (good luck reading those). Helped to figure that the bootinfo contained
* garbage data on the amount and size of memory chunks ...
*
* The 'pos' argument now simply means 'linefeed after print' ...
*/
#ifdef DEBUG_SCREEN
static int peng, line;
#endif
#if 0
void mac_debugging_short(int pos, short num)
{
#ifdef DEBUG_SCREEN
unsigned char *pengoffset;
unsigned char *pptr;
int i;
#endif
#ifdef DEBUG_SERIAL
printk("debug: %d !\n", num);
#endif
#ifdef DEBUG_SCREEN
if (!MACH_IS_MAC) {
/* printk("debug: %d !\n", num); */
return;
}
/* calculate current offset */
pengoffset = (unsigned char *)mac_videobase +
(150+line*2) * mac_rowbytes + 80 * peng;
pptr = pengoffset;
for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */
/* value mask for bit i, reverse order */
*pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00);
}
peng++;
if (pos) {
line++;
peng = 0;
}
#endif
}
void mac_debugging_long(int pos, long addr)
{
#ifdef DEBUG_SCREEN
unsigned char *pengoffset;
unsigned char *pptr;
int i;
#endif
#ifdef DEBUG_SERIAL
printk("debug: #%ld !\n", addr);
#endif
#ifdef DEBUG_SCREEN
if (!MACH_IS_MAC) {
/* printk("debug: #%ld !\n", addr); */
return;
}
pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
+80*peng;
pptr = pengoffset;
for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */
*pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00);
}
peng++;
if (pos) {
line++;
peng = 0;
}
#endif
}
#endif /* 0 */
#ifdef DEBUG_SERIAL
/*
* TODO: serial debug code
*/
struct mac_SCC {
u_char cha_b_ctrl;
u_char char_dummy1;
u_char cha_a_ctrl;
u_char char_dummy2;
u_char cha_b_data;
u_char char_dummy3;
u_char cha_a_data;
};
# define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
static int scc_port = -1;
static struct console mac_console_driver = {
.name = "debug",
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* Crude hack to get console output to the screen before the framebuffer
* is initialized (happens a lot later in 2.1!).
* We just use the console routines declared in head.S, this will interfere
* with regular framebuffer console output and should be used exclusively
* to debug kernel problems manifesting before framebuffer init (aka WSOD)
*
* To keep this hack from interfering with the regular console driver, either
* deregister this driver before/on framebuffer console init, or silence this
* function after the fbcon driver is running (will lose console messages!?).
* To debug real early bugs, need to write a 'mac_register_console_hack()'
* that is called from start_kernel() before setup_arch() and just registers
* this driver if Mac.
*/
static void mac_debug_console_write(struct console *co, const char *str,
unsigned int count)
{
mac_serial_print(str);
}
/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
#define uSEC 1
static inline void mac_sccb_out(char c)
{
int i;
do {
for (i = uSEC; i > 0; --i)
barrier();
} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
for (i = uSEC; i > 0; --i)
barrier();
scc.cha_b_data = c;
}
static inline void mac_scca_out(char c)
{
int i;
do {
for (i = uSEC; i > 0; --i)
barrier();
} while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
for (i = uSEC; i > 0; --i)
barrier();
scc.cha_a_data = c;
}
static void mac_sccb_console_write(struct console *co, const char *str,
unsigned int count)
{
while (count--) {
if (*str == '\n')
mac_sccb_out('\r');
mac_sccb_out(*str++);
}
}
static void mac_scca_console_write(struct console *co, const char *str,
unsigned int count)
{
while (count--) {
if (*str == '\n')
mac_scca_out('\r');
mac_scca_out(*str++);
}
}
/* The following two functions do a quick'n'dirty initialization of the MFP or
* SCC serial ports. They're used by the debugging interface, kgdb, and the
* serial console code. */
#define SCCB_WRITE(reg,val) \
do { \
int i; \
scc.cha_b_ctrl = (reg); \
for (i = uSEC; i > 0; --i) \
barrier(); \
scc.cha_b_ctrl = (val); \
for (i = uSEC; i > 0; --i) \
barrier(); \
} while(0)
#define SCCA_WRITE(reg,val) \
do { \
int i; \
scc.cha_a_ctrl = (reg); \
for (i = uSEC; i > 0; --i) \
barrier(); \
scc.cha_a_ctrl = (val); \
for (i = uSEC; i > 0; --i) \
barrier(); \
} while(0)
/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
* delay of ~ 60us. */
/* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
#define LONG_DELAY() \
do { \
int i; \
for (i = 60*uSEC; i > 0; --i) \
barrier(); \
} while(0)
static void __init mac_init_scc_port(int cflag, int port)
{
/*
* baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
*/
static int clksrc_table[9] =
/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
static int clkmode_table[9] =
/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
static int div_table[9] =
/* reg12 (BRG low) */
{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
int baud = cflag & CBAUD;
int clksrc, clkmode, div, reg3, reg5;
if (cflag & CBAUDEX)
baud += B38400;
if (baud < B1200 || baud > B38400+2)
baud = B9600; /* use default 9600bps for non-implemented rates */
baud -= B1200; /* tables starts at 1200bps */
clksrc = clksrc_table[baud];
clkmode = clkmode_table[baud];
div = div_table[baud];
reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
if (port == 1) {
(void)scc.cha_b_ctrl; /* reset reg pointer */
SCCB_WRITE(9, 0xc0); /* reset */
LONG_DELAY(); /* extra delay after WR9 access */
SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
0x04 /* 1 stopbit */ |
clkmode);
SCCB_WRITE(3, reg3);
SCCB_WRITE(5, reg5);
SCCB_WRITE(9, 0); /* no interrupts */
LONG_DELAY(); /* extra delay after WR9 access */
SCCB_WRITE(10, 0); /* NRZ mode */
SCCB_WRITE(11, clksrc); /* main clock source */
SCCB_WRITE(12, div); /* BRG value */
SCCB_WRITE(13, 0); /* BRG high byte */
SCCB_WRITE(14, 1);
SCCB_WRITE(3, reg3 | 1);
SCCB_WRITE(5, reg5 | 8);
} else if (port == 0) {
(void)scc.cha_a_ctrl; /* reset reg pointer */
SCCA_WRITE(9, 0xc0); /* reset */
LONG_DELAY(); /* extra delay after WR9 access */
SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
0x04 /* 1 stopbit */ |
clkmode);
SCCA_WRITE(3, reg3);
SCCA_WRITE(5, reg5);
SCCA_WRITE(9, 0); /* no interrupts */
LONG_DELAY(); /* extra delay after WR9 access */
SCCA_WRITE(10, 0); /* NRZ mode */
SCCA_WRITE(11, clksrc); /* main clock source */
SCCA_WRITE(12, div); /* BRG value */
SCCA_WRITE(13, 0); /* BRG high byte */
SCCA_WRITE(14, 1);
SCCA_WRITE(3, reg3 | 1);
SCCA_WRITE(5, reg5 | 8);
}
}
#endif /* DEBUG_SERIAL */
static int __init mac_debug_setup(char *arg)
{
if (!MACH_IS_MAC)
return 0;
#ifdef DEBUG_SERIAL
if (!strcmp(arg, "ser") || !strcmp(arg, "ser1")) {
/* Mac modem port */
mac_init_scc_port(B9600|CS8, 0);
mac_console_driver.write = mac_scca_console_write;
scc_port = 0;
} else if (!strcmp(arg, "ser2")) {
/* Mac printer port */
mac_init_scc_port(B9600|CS8, 1);
mac_console_driver.write = mac_sccb_console_write;
scc_port = 1;
}
#endif
#ifdef DEBUG_HEADS
if (!strcmp(arg, "scn") || !strcmp(arg, "con")) {
/* display, using head.S console routines */
mac_console_driver.write = mac_debug_console_write;
}
#endif
if (mac_console_driver.write)
register_console(&mac_console_driver);
return 0;
}
early_param("debug", mac_debug_setup);

101
arch/m68k/mac/macints.c
View File

@ -34,9 +34,7 @@
*
* 3 - unused (?)
*
* 4 - SCC (slot number determined by reading RR3 on the SSC itself)
* - slot 1: SCC channel A
* - slot 2: SCC channel B
* 4 - SCC
*
* 5 - unused (?)
* [serial errors or special conditions seem to raise level 6
@ -55,8 +53,6 @@
* - slot 5: Slot $E
*
* 4 - SCC IOP
* - slot 1: SCC channel A
* - slot 2: SCC channel B
*
* 5 - ISM IOP (ADB?)
*
@ -136,13 +132,8 @@
#include <asm/irq_regs.h>
#include <asm/mac_oss.h>
#define DEBUG_SPURIOUS
#define SHUTUP_SONIC
/* SCC interrupt mask */
static int scc_mask;
/*
* VIA/RBV hooks
*/
@ -190,13 +181,6 @@ extern void baboon_irq_enable(int);
extern void baboon_irq_disable(int);
extern void baboon_irq_clear(int);
/*
* SCC interrupt routines
*/
static void scc_irq_enable(unsigned int);
static void scc_irq_disable(unsigned int);
/*
* console_loglevel determines NMI handler function
*/
@ -221,8 +205,6 @@ void __init mac_init_IRQ(void)
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Setting things up...\n");
#endif
scc_mask = 0;
m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
NUM_MAC_SOURCES - IRQ_USER);
/* Make sure the SONIC interrupt is cleared or things get ugly */
@ -283,15 +265,16 @@ void mac_enable_irq(unsigned int irq)
via_irq_enable(irq);
break;
case 3:
case 4:
case 5:
case 6:
if (psc_present)
psc_irq_enable(irq);
else if (oss_present)
oss_irq_enable(irq);
else if (irq_src == 4)
scc_irq_enable(irq);
break;
case 4:
if (psc_present)
psc_irq_enable(irq);
break;
case 8:
if (baboon_present)
@ -316,15 +299,16 @@ void mac_disable_irq(unsigned int irq)
via_irq_disable(irq);
break;
case 3:
case 4:
case 5:
case 6:
if (psc_present)
psc_irq_disable(irq);
else if (oss_present)
oss_irq_disable(irq);
else if (irq_src == 4)
scc_irq_disable(irq);
break;
case 4:
if (psc_present)
psc_irq_disable(irq);
break;
case 8:
if (baboon_present)
@ -347,7 +331,6 @@ void mac_clear_irq(unsigned int irq)
via_irq_clear(irq);
break;
case 3:
case 4:
case 5:
case 6:
if (psc_present)
@ -355,6 +338,10 @@ void mac_clear_irq(unsigned int irq)
else if (oss_present)
oss_irq_clear(irq);
break;
case 4:
if (psc_present)
psc_irq_clear(irq);
break;
case 8:
if (baboon_present)
baboon_irq_clear(irq);
@ -374,13 +361,17 @@ int mac_irq_pending(unsigned int irq)
else
return via_irq_pending(irq);
case 3:
case 4:
case 5:
case 6:
if (psc_present)
return psc_irq_pending(irq);
else if (oss_present)
return oss_irq_pending(irq);
break;
case 4:
if (psc_present)
psc_irq_pending(irq);
break;
}
return 0;
}
@ -448,59 +439,3 @@ irqreturn_t mac_nmi_handler(int irq, void *dev_id)
in_nmi--;
return IRQ_HANDLED;
}
/*
* Simple routines for masking and unmasking
* SCC interrupts in cases where this can't be
* done in hardware (only the PSC can do that.)
*/
static void scc_irq_enable(unsigned int irq)
{
int irq_idx = IRQ_IDX(irq);
scc_mask |= (1 << irq_idx);
}
static void scc_irq_disable(unsigned int irq)
{
int irq_idx = IRQ_IDX(irq);
scc_mask &= ~(1 << irq_idx);
}
/*
* SCC master interrupt handler. We have to do a bit of magic here
* to figure out what channel gave us the interrupt; putting this
* here is cleaner than hacking it into drivers/char/macserial.c.
*/
void mac_scc_dispatch(int irq, void *dev_id)
{
volatile unsigned char *scc = (unsigned char *) mac_bi_data.sccbase + 2;
unsigned char reg;
unsigned long flags;
/* Read RR3 from the chip. Always do this on channel A */
/* This must be an atomic operation so disable irqs. */
local_irq_save(flags);
*scc = 3;
reg = *scc;
local_irq_restore(flags);
/* Now dispatch. Bits 0-2 are for channel B and */
/* bits 3-5 are for channel A. We can safely */
/* ignore the remaining bits here. */
/* */
/* Note that we're ignoring scc_mask for now. */
/* If we actually mask the ints then we tend to */
/* get hammered by very persistent SCC irqs, */
/* and since they're autovector interrupts they */
/* pretty much kill the system. */
if (reg & 0x38)
m68k_handle_int(IRQ_SCCA);
if (reg & 0x07)
m68k_handle_int(IRQ_SCCB);
}

20
arch/m68k/mac/oss.c
View File

@ -33,7 +33,6 @@ static irqreturn_t oss_irq(int, void *);
static irqreturn_t oss_nubus_irq(int, void *);
extern irqreturn_t via1_irq(int, void *);
extern irqreturn_t mac_scc_dispatch(int, void *);
/*
* Initialize the OSS
@ -69,9 +68,6 @@ void __init oss_register_interrupts(void)
if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
"scsi", (void *) oss))
pr_err("Couldn't register %s interrupt\n", "scsi");
if (request_irq(OSS_IRQLEV_IOPSCC, mac_scc_dispatch, IRQ_FLG_LOCK,
"scc", mac_scc_dispatch))
pr_err("Couldn't register %s interrupt\n", "scc");
if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
"nubus", (void *) oss))
pr_err("Couldn't register %s interrupt\n", "nubus");
@ -172,9 +168,7 @@ void oss_irq_enable(int irq) {
printk("oss_irq_enable(%d)\n", irq);
#endif
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
case IRQ_MAC_SCC:
oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC;
break;
case IRQ_MAC_ADB:
@ -212,9 +206,7 @@ void oss_irq_disable(int irq) {
printk("oss_irq_disable(%d)\n", irq);
#endif
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
case IRQ_MAC_SCC:
oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED;
break;
case IRQ_MAC_ADB:
@ -250,9 +242,7 @@ void oss_irq_disable(int irq) {
void oss_irq_clear(int irq) {
/* FIXME: how to do this on OSS? */
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
case IRQ_MAC_SCC:
oss->irq_pending &= ~OSS_IP_IOPSCC;
break;
case IRQ_MAC_ADB:
@ -280,9 +270,7 @@ void oss_irq_clear(int irq) {
int oss_irq_pending(int irq)
{
switch(irq) {
case IRQ_SCC:
case IRQ_SCCA:
case IRQ_SCCB:
case IRQ_MAC_SCC:
return oss->irq_pending & OSS_IP_IOPSCC;
break;
case IRQ_MAC_ADB:

7
arch/m68k/mac/via.c
View File

@ -84,8 +84,6 @@ void via_irq_enable(int irq);
void via_irq_disable(int irq);
void via_irq_clear(int irq);
extern irqreturn_t mac_scc_dispatch(int, void *);
/*
* Initialize the VIAs
*
@ -311,11 +309,6 @@ void __init via_register_interrupts(void)
if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
"via2", (void *) via2))
pr_err("Couldn't register %s interrupt\n", "via2");
if (!psc_present) {
if (request_irq(IRQ_AUTO_4, mac_scc_dispatch, IRQ_FLG_LOCK,
"scc", mac_scc_dispatch))
pr_err("Couldn't register %s interrupt\n", "scc");
}
if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
pr_err("Couldn't register %s interrupt\n", "nubus");

5
arch/m68k/mm/kmap.c
View File

@ -99,8 +99,7 @@ static inline void free_io_area(void *addr)
#endif
/*
* Map some physical address range into the kernel address space. The
* code is copied and adapted from map_chunk().
* Map some physical address range into the kernel address space.
*/
/* Rewritten by Andreas Schwab to remove all races. */
@ -116,7 +115,7 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla
/*
* Don't allow mappings that wrap..
*/
if (!size || size > physaddr + size)
if (!size || physaddr > (unsigned long)(-size))
return NULL;
#ifdef CONFIG_AMIGA

4
arch/m68knommu/kernel/process.c
View File

@ -221,6 +221,10 @@ int copy_thread(unsigned long clone_flags,
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childstack;
if (clone_flags & CLONE_SETTLS)
task_thread_info(p)->tp_value = regs->d5;
/*
* Must save the current SFC/DFC value, NOT the value when
* the parent was last descheduled - RGH 10-08-96

5
arch/m68knommu/kernel/ptrace.c
View File

@ -319,6 +319,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
}
#endif
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value,
(unsigned long __user *)data);
break;
default:
ret = -EIO;
break;

36
arch/m68knommu/kernel/sys_m68k.c
View File

@ -190,3 +190,39 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[])
: "d" (__a), "d" (__b), "d" (__c));
return __res;
}
asmlinkage unsigned long sys_get_thread_area(void)
{
return current_thread_info()->tp_value;
}
asmlinkage int sys_set_thread_area(unsigned long tp)
{
current_thread_info()->tp_value = tp;
return 0;
}
/* This syscall gets its arguments in A0 (mem), D2 (oldval) and
D1 (newval). */
asmlinkage int
sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5,
unsigned long __user * mem)
{
struct mm_struct *mm = current->mm;
unsigned long mem_value;
down_read(&mm->mmap_sem);
mem_value = *mem;
if (mem_value == oldval)
*mem = newval;
up_read(&mm->mmap_sem);
return mem_value;
}
asmlinkage int sys_atomic_barrier(void)
{
/* no code needed for uniprocs */
return 0;
}

4
arch/m68knommu/kernel/syscalltable.S
View File

@ -351,6 +351,10 @@ ENTRY(sys_call_table)
.long sys_pwritev /* 330 */
.long sys_rt_tgsigqueueinfo
.long sys_perf_event_open
.long sys_get_thread_area
.long sys_set_thread_area
.long sys_atomic_cmpxchg_32 /* 335 */
.long sys_atomic_barrier
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall

1
arch/m68knommu/mm/memory.c
View File

@ -24,7 +24,6 @@
/*
* Map some physical address range into the kernel address space.
* The code is copied and adapted from map_chunk().
*/
unsigned long kernel_map(unsigned long paddr, unsigned long size,

1
arch/microblaze/Kconfig
View File

@ -130,6 +130,7 @@ config CMDLINE_FORCE
config OF
def_bool y
select OF_FLATTREE
config PROC_DEVICETREE
bool "Support for device tree in /proc"

2
arch/microblaze/include/asm/io.h
View File

@ -217,7 +217,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
* Little endian
*/
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
#define in_le32(a) __le32_to_cpu(__raw_readl(a))

20
arch/microblaze/include/asm/prom.h
View File

@ -26,31 +26,11 @@
#include <asm/irq.h>
#include <asm/atomic.h>
#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
extern struct device_node *of_chosen;
#define HAVE_ARCH_DEVTREE_FIXUPS
extern struct device_node *allnodes; /* temporary while merging */
extern rwlock_t devtree_lock; /* temporary while merging */
/* For updating the device tree at runtime */
extern void of_attach_node(struct device_node *);
extern void of_detach_node(struct device_node *);
/* Other Prototypes */
extern int early_uartlite_console(void);
extern struct resource *request_OF_resource(struct device_node *node,
int index, const char *name_postfix);
extern int release_OF_resource(struct device_node *node, int index);
/*
* OF address retreival & translation
*/

27
arch/microblaze/kernel/cpu/cache.c
View File

@ -172,16 +172,15 @@ do { \
/* It is used only first parameter for OP - for wic, wdc */
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
int step = -line_length; \
int count = end - start; \
BUG_ON(count <= 0); \
int volatile temp; \
BUG_ON(end - start <= 0); \
\
__asm__ __volatile__ (" 1: addk %0, %0, %1; \
" #op " %0, r0; \
bgtid %1, 1b; \
addk %1, %1, %2; \
" : : "r" (start), "r" (count), \
"r" (step) : "memory"); \
__asm__ __volatile__ (" 1: " #op " %1, r0; \
cmpu %0, %1, %2; \
bgtid %0, 1b; \
addk %1, %1, %3; \
" : : "r" (temp), "r" (start), "r" (end),\
"r" (line_length) : "memory"); \
} while (0);
static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end)
@ -313,16 +312,6 @@ static void __invalidate_dcache_all_wb(void)
pr_debug("%s\n", __func__);
CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
wdc.clear)
#if 0
unsigned int i;
pr_debug("%s\n", __func__);
/* Just loop through cache size and invalidate it */
for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length)
__invalidate_dcache(0, i);
#endif
}
static void __invalidate_dcache_range_wb(unsigned long start,

2
arch/microblaze/kernel/of_platform.c
View File

@ -185,7 +185,7 @@ EXPORT_SYMBOL(of_find_device_by_node);
static int of_dev_phandle_match(struct device *dev, void *data)
{
phandle *ph = data;
return to_of_device(dev)->node->linux_phandle == *ph;
return to_of_device(dev)->node->phandle == *ph;
}
struct of_device *of_find_device_by_phandle(phandle ph)

Some files were not shown because too many files have changed in this diff Show More