wil6210: atomic I/O for the card memory

Introduce netdev IOCTLs, to be used by the debug tools.

Allows to read/write single dword value or
memory block, aligned to dword
Different address modes supported:
- BAR offset
- Firmware "linker" address
- target's AHB bus

Change-Id: I65c97ad4a4f169c56d4d4a4f846cc176c3771f8f
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Git-commit: dba4b74d2da8798626e2b702ad3f452671e335f7
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
This commit is contained in:
Vladimir Kondratiev 2014-10-01 15:05:25 +03:00 committed by Gerrit - the friendly Code Review server
parent 3e8144eb46
commit 51370aa782
6 changed files with 276 additions and 0 deletions

View File

@ -1406,6 +1406,7 @@ L: wil6210@qca.qualcomm.com
S: Supported
W: http://wireless.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/
F: include/uapi/linux/wil6210_uapi.h
CARL9170 LINUX COMMUNITY WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>

View File

@ -10,6 +10,7 @@ wil6210-y += interrupt.o
wil6210-y += txrx.o
wil6210-y += debug.o
wil6210-y += rx_reorder.o
wil6210-y += ioctl.o
wil6210-y += fw.o
wil6210-$(CONFIG_WIL6210_TRACING) += trace.o
wil6210-y += wil_platform.o

View File

@ -0,0 +1,173 @@
/*
* Copyright (c) 2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/uaccess.h>
#include "wil6210.h"
#include <uapi/linux/wil6210_uapi.h>
#define wil_hex_dump_ioctl(prefix_str, buf, len) \
print_hex_dump_debug("DBG[IOC ]" prefix_str, \
DUMP_PREFIX_OFFSET, 16, 1, buf, len, true)
#define wil_dbg_ioctl(wil, fmt, arg...) wil_dbg(wil, "DBG[IOC ]" fmt, ##arg)
static void __iomem *wil_ioc_addr(struct wil6210_priv *wil, uint32_t addr,
uint32_t size, enum wil_memio_op op)
{
void __iomem *a;
u32 off;
switch (op & wil_mmio_addr_mask) {
case wil_mmio_addr_linker:
a = wmi_buffer(wil, cpu_to_le32(addr));
break;
case wil_mmio_addr_ahb:
a = wmi_addr(wil, addr);
break;
case wil_mmio_addr_bar:
a = wmi_addr(wil, addr + WIL6210_FW_HOST_OFF);
break;
default:
wil_err(wil, "Unsupported address mode, op = 0x%08x\n", op);
return NULL;
}
off = a - wil->csr;
if (size >= WIL6210_MEM_SIZE - off) {
wil_err(wil, "Requested block does not fit into memory: "
"off = 0x%08x size = 0x%08x\n", off, size);
return NULL;
}
return a;
}
static int wil_ioc_memio_dword(struct wil6210_priv *wil, void __user *data)
{
struct wil_memio io;
void __iomem *a;
bool need_copy = false;
if (copy_from_user(&io, data, sizeof(io)))
return -EFAULT;
wil_dbg_ioctl(wil, "IO: addr = 0x%08x val = 0x%08x op = 0x%08x\n",
io.addr, io.val, io.op);
a = wil_ioc_addr(wil, io.addr, sizeof(u32), io.op);
if (!a) {
wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
io.op);
return -EINVAL;
}
/* operation */
switch (io.op & wil_mmio_op_mask) {
case wil_mmio_read:
io.val = ioread32(a);
need_copy = true;
break;
case wil_mmio_write:
iowrite32(io.val, a);
wmb(); /* make sure write propagated to HW */
break;
default:
wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
return -EINVAL;
}
if (need_copy) {
wil_dbg_ioctl(wil, "IO done: addr = 0x%08x"
" val = 0x%08x op = 0x%08x\n",
io.addr, io.val, io.op);
if (copy_to_user(data, &io, sizeof(io)))
return -EFAULT;
}
return 0;
}
static int wil_ioc_memio_block(struct wil6210_priv *wil, void __user *data)
{
struct wil_memio_block io;
void *block;
void __iomem *a;
int rc = 0;
if (copy_from_user(&io, data, sizeof(io)))
return -EFAULT;
wil_dbg_ioctl(wil, "IO: addr = 0x%08x size = 0x%08x op = 0x%08x\n",
io.addr, io.size, io.op);
/* size */
if (io.size % 4) {
wil_err(wil, "size is not multiple of 4: 0x%08x\n", io.size);
return -EINVAL;
}
a = wil_ioc_addr(wil, io.addr, io.size, io.op);
if (!a) {
wil_err(wil, "invalid address 0x%08x, op = 0x%08x\n", io.addr,
io.op);
return -EINVAL;
}
block = kmalloc(io.size, GFP_USER);
if (!block)
return -ENOMEM;
/* operation */
switch (io.op & wil_mmio_op_mask) {
case wil_mmio_read:
wil_memcpy_fromio_32(block, a, io.size);
wil_hex_dump_ioctl("Read ", block, io.size);
if (copy_to_user(io.block, block, io.size)) {
rc = -EFAULT;
goto out_free;
}
break;
case wil_mmio_write:
if (copy_from_user(block, io.block, io.size)) {
rc = -EFAULT;
goto out_free;
}
wil_memcpy_toio_32(a, block, io.size);
wmb(); /* make sure write propagated to HW */
wil_hex_dump_ioctl("Write ", block, io.size);
break;
default:
wil_err(wil, "Unsupported operation, op = 0x%08x\n", io.op);
rc = -EINVAL;
break;
}
out_free:
kfree(block);
return rc;
}
int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd)
{
switch (cmd) {
case WIL_IOCTL_MEMIO:
return wil_ioc_memio_dword(wil, data);
case WIL_IOCTL_MEMIO_BLOCK:
return wil_ioc_memio_block(wil, data);
default:
wil_dbg_ioctl(wil, "Unsupported IOCTL 0x%04x\n", cmd);
return -ENOIOCTLCMD;
}
}

View File

@ -52,6 +52,17 @@ static int wil_change_mtu(struct net_device *ndev, int new_mtu)
return 0;
}
static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct wil6210_priv *wil = ndev_to_wil(ndev);
int ret = wil_ioctl(wil, ifr->ifr_data, cmd);
wil_dbg_misc(wil, "ioctl(0x%04x) -> %d\n", cmd, ret);
return ret;
}
static const struct net_device_ops wil_netdev_ops = {
.ndo_open = wil_open,
.ndo_stop = wil_stop,
@ -59,6 +70,7 @@ static const struct net_device_ops wil_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = wil_change_mtu,
.ndo_do_ioctl = wil_do_ioctl,
};
static int wil6210_netdev_poll_rx(struct napi_struct *napi, int budget)

View File

@ -597,5 +597,7 @@ void wil6210_unmask_irq_rx(struct wil6210_priv *wil);
int wil_iftype_nl2wmi(enum nl80211_iftype type);
int wil_ioctl(struct wil6210_priv *wil, void __user *data, int cmd);
int wil_request_firmware(struct wil6210_priv *wil, const char *name);
#endif /* __WIL6210_H__ */

View File

@ -0,0 +1,87 @@
/*
* Copyright (c) 2014 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef __WIL6210_UAPI_H__
#define __WIL6210_UAPI_H__
#if !defined(__KERNEL__)
#define __user
#endif
#include <linux/sockios.h>
/* Numbers SIOCDEVPRIVATE and SIOCDEVPRIVATE + 1
* are used by Android devices to implement PNO (preferred network offload).
* Albeit it is temporary solution, use different numbers to avoid conflicts
*/
/**
* Perform 32-bit I/O operation to the card memory
*
* User code should arrange data in memory like this:
*
* struct wil_memio io;
* struct ifreq ifr = {
* .ifr_data = &io,
* };
*/
#define WIL_IOCTL_MEMIO (SIOCDEVPRIVATE + 2)
/**
* Perform block I/O operation to the card memory
*
* User code should arrange data in memory like this:
*
* void *buf;
* struct wil_memio_block io = {
* .block = buf,
* };
* struct ifreq ifr = {
* .ifr_data = &io,
* };
*/
#define WIL_IOCTL_MEMIO_BLOCK (SIOCDEVPRIVATE + 3)
/**
* operation to perform
*
* @wil_mmio_op_mask - bits defining operation,
* @wil_mmio_addr_mask - bits defining addressing mode
*/
enum wil_memio_op {
wil_mmio_read = 0,
wil_mmio_write = 1,
wil_mmio_op_mask = 0xff,
wil_mmio_addr_linker = 0 << 8,
wil_mmio_addr_ahb = 1 << 8,
wil_mmio_addr_bar = 2 << 8,
wil_mmio_addr_mask = 0xff00,
};
struct wil_memio {
uint32_t op; /* enum wil_memio_op */
uint32_t addr; /* should be 32-bit aligned */
uint32_t val;
};
struct wil_memio_block {
uint32_t op; /* enum wil_memio_op */
uint32_t addr; /* should be 32-bit aligned */
uint32_t size; /* should be multiple of 4 */
void __user *block; /* block address */
};
#endif /* __WIL6210_UAPI_H__ */