joel16/android_kernel_sony_msm8994_rework
1
0
Fork 0
mirror of https://github.com/joel16/android_kernel_sony_msm8994_rework.git synced 2024-11-24 04:19:51 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

Browse Source 
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: check interface is down before type change
  cfg80211: fix NULL ptr deref
  libertas if_usb: Fix crash on 64-bit machines
  mac80211: fix reason code output endianness
  mac80211: fix addba timer
  ath9k: fix misplaced semicolon on rate control
  b43: Fix DMA TX bounce buffer copying
  mac80211: fix BSS leak
  rt73usb.c : more ids
  ipw2200: fix oops on missing firmware
  gre: Fix dev_addr clobbering for gretap
  sky2: set carrier off in probe
  net: fix sk_forward_alloc corruption
  pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card
  r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames
  ibmtr: possible Read buffer overflow?
  net: Fix RPF to work with policy routing
  net: fix kmemcheck annotations
  e1000e: rework disable K1 at 1000Mbps for 82577/82578
  e1000e: config PHY via software after resets
  ...
This commit is contained in:
Linus Torvalds 2009-11-03 07:44:01 -08:00
commit a84216e671
39 changed files with 606 additions and 180 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
drivers/net/e100.c
View File

@ -1427,19 +1427,31 @@ static int e100_phy_init(struct nic *nic)
} else
DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
/* Isolate all the PHY ids */
for (addr = 0; addr < 32; addr++)
mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
/* Select the discovered PHY */
bmcr &= ~BMCR_ISOLATE;
mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
/* Get phy ID */
id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
nic->phy = (u32)id_hi << 16 | (u32)id_lo;
DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
/* Select the phy and isolate the rest */
for (addr = 0; addr < 32; addr++) {
if (addr != nic->mii.phy_id) {
mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
} else if (nic->phy != phy_82552_v) {
bmcr = mdio_read(netdev, addr, MII_BMCR);
mdio_write(netdev, addr, MII_BMCR,
bmcr & ~BMCR_ISOLATE);
}
}
/*
* Workaround for 82552:
* Clear the ISOLATE bit on selected phy_id last (mirrored on all
* other phy_id's) using bmcr value from addr discovery loop above.
*/
if (nic->phy == phy_82552_v)
mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
bmcr & ~BMCR_ISOLATE);
/* Handle National tx phys */
#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {

2
drivers/net/e1000e/defines.h
View File

@ -76,6 +76,7 @@
/* Extended Device Control */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
@ -347,6 +348,7 @@
/* Extended Configuration Control and Size */
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16

14
drivers/net/e1000e/e1000.h
View File

@ -141,6 +141,20 @@ struct e1000_info;
#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
#define HV_TNCRS_LOWER PHY_REG(778, 30)
/* BM PHY Copper Specific Status */
#define BM_CS_STATUS 17
#define BM_CS_STATUS_LINK_UP 0x0400
#define BM_CS_STATUS_RESOLVED 0x0800
#define BM_CS_STATUS_SPEED_MASK 0xC000
#define BM_CS_STATUS_SPEED_1000 0x8000
/* 82577 Mobile Phy Status Register */
#define HV_M_STATUS 26
#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
#define HV_M_STATUS_SPEED_MASK 0x0300
#define HV_M_STATUS_SPEED_1000 0x0200
#define HV_M_STATUS_LINK_UP 0x0040
enum e1000_boards {
board_82571,
board_82572,

1
drivers/net/e1000e/hw.h
View File

@ -903,6 +903,7 @@ struct e1000_shadow_ram {
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
bool nvm_k1_enabled;
};
struct e1000_hw {

482
drivers/net/e1000e/ich8lan.c
View File

@ -124,11 +124,25 @@
#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
/* SMBus Address Phy Register */
#define HV_SMB_ADDR PHY_REG(768, 26)
#define HV_SMB_ADDR_PEC_EN 0x0200
#define HV_SMB_ADDR_VALID 0x0080
/* Strapping Option Register - RO */
#define E1000_STRAP 0x0000C
#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
/* OEM Bits Phy Register */
#define HV_OEM_BITS PHY_REG(768, 25)
#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
@ -208,6 +222,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
@ -483,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
goto out;
}
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
E1000_KMRNCTRLSTA_K1_ENABLE);
if (ret_val)
goto out;
}
/*
* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@ -500,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
if (ret_val)
goto out;
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_k1_gig_workaround_hv(hw, link);
if (ret_val)
goto out;
}
if (!link)
goto out; /* No link detected */
@ -793,6 +808,326 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
return 0;
}
/**
* e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
* @hw: pointer to the HW structure
*
* SW should configure the LCD from the NVM extended configuration region
* as a workaround for certain parts.
**/
static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
u16 word_addr, reg_data, reg_addr, phy_page = 0;
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
return ret_val;
/*
* Initialize the PHY from the NVM on ICH platforms. This
* is needed due to an issue where the NVM configuration is
* not properly autoloaded after power transitions.
* Therefore, after each PHY reset, we will load the
* configuration data out of the NVM manually.
*/
if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
(hw->mac.type == e1000_pchlan)) {
struct e1000_adapter *adapter = hw->adapter;
/* Check if SW needs to configure the PHY */
if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
(adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
(hw->mac.type == e1000_pchlan))
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
else
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
data = er32(FEXTNVM);
if (!(data & sw_cfg_mask))
goto out;
/* Wait for basic configuration completes before proceeding */
e1000_lan_init_done_ich8lan(hw);
/*
* Make sure HW does not configure LCD from PHY
* extended configuration before SW configuration
*/
data = er32(EXTCNF_CTRL);
if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
goto out;
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
if (!cnf_size)
goto out;
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
(hw->mac.type == e1000_pchlan)) {
/*
* HW configures the SMBus address and LEDs when the
* OEM and LCD Write Enable bits are set in the NVM.
* When both NVM bits are cleared, SW will configure
* them instead.
*/
data = er32(STRAP);
data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
reg_data);
if (ret_val)
goto out;
data = er32(LEDCTL);
ret_val = e1000_write_phy_reg_hv_locked(hw,
HV_LED_CONFIG,
(u16)data);
if (ret_val)
goto out;
}
/* Configure LCD from extended configuration region. */
/* cnf_base_addr is in DWORD */
word_addr = (u16)(cnf_base_addr << 1);
for (i = 0; i < cnf_size; i++) {
ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
&reg_data);
if (ret_val)
goto out;
ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
1, &reg_addr);
if (ret_val)
goto out;
/* Save off the PHY page for future writes. */
if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
phy_page = reg_data;
continue;
}
reg_addr &= PHY_REG_MASK;
reg_addr |= phy_page;
ret_val = phy->ops.write_phy_reg_locked(hw,
(u32)reg_addr,
reg_data);
if (ret_val)
goto out;
}
}
out:
hw->phy.ops.release_phy(hw);
return ret_val;
}
/**
* e1000_k1_gig_workaround_hv - K1 Si workaround
* @hw: pointer to the HW structure
* @link: link up bool flag
*
* If K1 is enabled for 1Gbps, the MAC might stall when transitioning
* from a lower speed. This workaround disables K1 whenever link is at 1Gig
* If link is down, the function will restore the default K1 setting located
* in the NVM.
**/
static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
{
s32 ret_val = 0;
u16 status_reg = 0;
bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
if (hw->mac.type != e1000_pchlan)
goto out;
/* Wrap the whole flow with the sw flag */
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
goto out;
/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
if (link) {
if (hw->phy.type == e1000_phy_82578) {
ret_val = hw->phy.ops.read_phy_reg_locked(hw,
BM_CS_STATUS,
&status_reg);
if (ret_val)
goto release;
status_reg &= BM_CS_STATUS_LINK_UP |
BM_CS_STATUS_RESOLVED |
BM_CS_STATUS_SPEED_MASK;
if (status_reg == (BM_CS_STATUS_LINK_UP |
BM_CS_STATUS_RESOLVED |
BM_CS_STATUS_SPEED_1000))
k1_enable = false;
}
if (hw->phy.type == e1000_phy_82577) {
ret_val = hw->phy.ops.read_phy_reg_locked(hw,
HV_M_STATUS,
&status_reg);
if (ret_val)
goto release;
status_reg &= HV_M_STATUS_LINK_UP |
HV_M_STATUS_AUTONEG_COMPLETE |
HV_M_STATUS_SPEED_MASK;
if (status_reg == (HV_M_STATUS_LINK_UP |
HV_M_STATUS_AUTONEG_COMPLETE |
HV_M_STATUS_SPEED_1000))
k1_enable = false;
}
/* Link stall fix for link up */
ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
0x0100);
if (ret_val)
goto release;
} else {
/* Link stall fix for link down */
ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
0x4100);
if (ret_val)
goto release;
}
ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
release:
hw->phy.ops.release_phy(hw);
out:
return ret_val;
}
/**
* e1000_configure_k1_ich8lan - Configure K1 power state
* @hw: pointer to the HW structure
* @enable: K1 state to configure
*
* Configure the K1 power state based on the provided parameter.
* Assumes semaphore already acquired.
*
* Success returns 0, Failure returns -E1000_ERR_PHY (-2)
**/
static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
{
s32 ret_val = 0;
u32 ctrl_reg = 0;
u32 ctrl_ext = 0;
u32 reg = 0;
u16 kmrn_reg = 0;
ret_val = e1000e_read_kmrn_reg_locked(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
&kmrn_reg);
if (ret_val)
goto out;
if (k1_enable)
kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
else
kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
ret_val = e1000e_write_kmrn_reg_locked(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
kmrn_reg);
if (ret_val)
goto out;
udelay(20);
ctrl_ext = er32(CTRL_EXT);
ctrl_reg = er32(CTRL);
reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
reg |= E1000_CTRL_FRCSPD;
ew32(CTRL, reg);
ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
udelay(20);
ew32(CTRL, ctrl_reg);
ew32(CTRL_EXT, ctrl_ext);
udelay(20);
out:
return ret_val;
}
/**
* e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
* @hw: pointer to the HW structure
* @d0_state: boolean if entering d0 or d3 device state
*
* SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
* collectively called OEM bits. The OEM Write Enable bit and SW Config bit
* in NVM determines whether HW should configure LPLU and Gbe Disable.
**/
static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
{
s32 ret_val = 0;
u32 mac_reg;
u16 oem_reg;
if (hw->mac.type != e1000_pchlan)
return ret_val;
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
return ret_val;
mac_reg = er32(EXTCNF_CTRL);
if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
goto out;
mac_reg = er32(FEXTNVM);
if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
goto out;
mac_reg = er32(PHY_CTRL);
ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
if (ret_val)
goto out;
oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
if (d0_state) {
if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
oem_reg |= HV_OEM_BITS_GBE_DIS;
if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
oem_reg |= HV_OEM_BITS_LPLU;
} else {
if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
oem_reg |= HV_OEM_BITS_GBE_DIS;
if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
oem_reg |= HV_OEM_BITS_LPLU;
}
/* Restart auto-neg to activate the bits */
oem_reg |= HV_OEM_BITS_RESTART_AN;
ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
out:
hw->phy.ops.release_phy(hw);
return ret_val;
}
/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
@ -833,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
return ret_val;
hw->phy.addr = 1;
e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
if (ret_val)
goto out;
hw->phy.ops.release_phy(hw);
/*
* Configure the K1 Si workaround during phy reset assuming there is
* link so that it disables K1 if link is in 1Gbps.
*/
ret_val = e1000_k1_gig_workaround_hv(hw, true);
out:
return ret_val;
}
@ -882,11 +1227,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i;
u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
s32 ret_val;
u16 reg, word_addr, reg_data, reg_addr, phy_page = 0;
s32 ret_val = 0;
u16 reg;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
@ -905,81 +1247,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
e1e_rphy(hw, BM_WUC, &reg);
/*
* Initialize the PHY from the NVM on ICH platforms. This
* is needed due to an issue where the NVM configuration is
* not properly autoloaded after power transitions.
* Therefore, after each PHY reset, we will load the
* configuration data out of the NVM manually.
*/
if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
struct e1000_adapter *adapter = hw->adapter;
/* Configure the LCD with the extended configuration region in NVM */
ret_val = e1000_sw_lcd_config_ich8lan(hw);
if (ret_val)
goto out;
/* Check if SW needs configure the PHY */
if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
(adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M))
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
else
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
data = er32(FEXTNVM);
if (!(data & sw_cfg_mask))
return 0;
/* Wait for basic configuration completes before proceeding */
e1000_lan_init_done_ich8lan(hw);
/*
* Make sure HW does not configure LCD from PHY
* extended configuration before SW configuration
*/
data = er32(EXTCNF_CTRL);
if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
return 0;
cnf_size = er32(EXTCNF_SIZE);
cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
if (!cnf_size)
return 0;
cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
/* Configure LCD from extended configuration region. */
/* cnf_base_addr is in DWORD */
word_addr = (u16)(cnf_base_addr << 1);
for (i = 0; i < cnf_size; i++) {
ret_val = e1000_read_nvm(hw,
(word_addr + i * 2),
1,
&reg_data);
if (ret_val)
return ret_val;
ret_val = e1000_read_nvm(hw,
(word_addr + i * 2 + 1),
1,
&reg_addr);
if (ret_val)
return ret_val;
/* Save off the PHY page for future writes. */
if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
phy_page = reg_data;
continue;
}
reg_addr |= phy_page;
ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
if (ret_val)
return ret_val;
}
}
/* Configure the LCD with the OEM bits in NVM */
if (hw->mac.type == e1000_pchlan)
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
out:
return 0;
}
@ -2306,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u16 reg;
u32 ctrl, icr, kab;
s32 ret_val;
@ -2341,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ew32(PBS, E1000_PBS_16K);
}
if (hw->mac.type == e1000_pchlan) {
/* Save the NVM K1 bit setting*/
ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, &reg);
if (ret_val)
return ret_val;
if (reg & E1000_NVM_K1_ENABLE)
dev_spec->nvm_k1_enabled = true;
else
dev_spec->nvm_k1_enabled = false;
}
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
@ -2386,6 +2676,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
e1e_rphy(hw, BM_WUC, &reg);
ret_val = e1000_sw_lcd_config_ich8lan(hw);
if (ret_val)
goto out;
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
if (ret_val)
goto out;
}
/*
* For PCH, this write will make sure that any noise
* will be detected as a CRC error and be dropped rather than show up
@ -2404,6 +2703,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
if (hw->mac.type == e1000_pchlan)
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
out:
return ret_val;
}
@ -2708,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
if (ret_val)
return ret_val;
if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_K1_CONFIG,
E1000_KMRNCTRLSTA_K1_DISABLE);
if (ret_val)
return ret_val;
}
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {

15
drivers/net/e1000e/phy.c
View File

@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] =
/* BM PHY Copper Specific Control 1 */
#define BM_CS_CTRL1 16
/* BM PHY Copper Specific Status */
#define BM_CS_STATUS 17
#define BM_CS_STATUS_LINK_UP 0x0400
#define BM_CS_STATUS_RESOLVED 0x0800
#define BM_CS_STATUS_SPEED_MASK 0xC000
#define BM_CS_STATUS_SPEED_1000 0x8000
#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
* e1000_read_kmrn_reg_locked - Read kumeran register
* e1000e_read_kmrn_reg_locked - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
* information retrieved is stored in data.
* Assumes semaphore already acquired.
**/
s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
{
return __e1000_read_kmrn_reg(hw, offset, data, true);
}
@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
* e1000_write_kmrn_reg_locked - Write kumeran register
* e1000e_write_kmrn_reg_locked - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
* Write the data to PHY register at the offset using the kumeran interface.
* Assumes semaphore already acquired.
**/
s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
{
return __e1000_write_kmrn_reg(hw, offset, data, true);
}

2
drivers/net/pcmcia/pcnet_cs.c
View File

@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",

2
drivers/net/r8169.c
View File

@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
RTL_W16(RxMaxSize, rx_buf_sz);
RTL_W16(RxMaxSize, rx_buf_sz + 1);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)

2
drivers/net/sky2.c
View File

@ -4538,6 +4538,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out_free_netdev;
}
netif_carrier_off(dev);
netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
err = request_irq(pdev->irq, sky2_intr,

11
drivers/net/tokenring/ibmtr.c
View File

@ -1144,9 +1144,16 @@ static void dir_open_adapter (struct net_device *dev)
} else {
char **prphase = printphase;
char **prerror = printerror;
int pnr = err / 16 - 1;
int enr = err % 16 - 1;
DPRINTK("TR Adapter misc open failure, error code = ");
printk("0x%x, Phase: %s, Error: %s\n",
err, prphase[err/16 -1], prerror[err%16 -1]);
if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) ||
enr < 0 ||
enr >= ARRAY_SIZE(printerror))
printk("0x%x, invalid Phase/Error.", err);
else
printk("0x%x, Phase: %s, Error: %s\n", err,
prphase[pnr], prerror[enr]);
printk(" retrying after %ds delay...\n",
TR_RETRY_INTERVAL/HZ);
}

2
drivers/net/wireless/ath/ath9k/rc.c
View File

@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
return rate;
if (rate_table->info[rate].valid_single_stream &&
!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
return rate;
/* This should not happen */

15
drivers/net/wireless/b43/dma.c
View File

@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot)
}
static int dma_tx_fragment(struct b43_dmaring *ring,
struct sk_buff *skb)
struct sk_buff **in_skb)
{
struct sk_buff *skb = *in_skb;
const struct b43_dma_ops *ops = ring->ops;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u8 *header;
@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring,
}
memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
bounce_skb->dev = skb->dev;
skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
info = IEEE80211_SKB_CB(bounce_skb);
dev_kfree_skb_any(skb);
skb = bounce_skb;
*in_skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb)
* static, so we don't need to store it per frame. */
ring->queue_prio = skb_get_queue_mapping(skb);
err = dma_tx_fragment(ring, skb);
/* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
* into the skb data or cb now. */
hdr = NULL;
info = NULL;
err = dma_tx_fragment(ring, &skb);
if (unlikely(err == -ENOKEY)) {
/* Drop this packet, as we don't have the encryption key
* anymore and must not transmit it unencrypted. */

5
drivers/net/wireless/ipw2x00/ipw2100.c
View File

@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
fail:
if (dev) {
if (registered)
if (registered) {
unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
}
ipw2100_hw_stop_adapter(priv);
@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
/* Unregister the device first - this results in close()
* being called if the device is open. If we free storage
* first, then close() will crash. */
unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
/* ipw2100_down will ensure that there is no more pending work

2
drivers/net/wireless/ipw2x00/ipw2200.c
View File

@ -11822,6 +11822,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
goto out_remove_sysfs;
}
@ -11872,6 +11873,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev)
mutex_unlock(&priv->mutex);
unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
if (priv->rxq) {

1
drivers/net/wireless/ipw2x00/libipw.h
View File

@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate)
/* ieee80211.c */
extern void free_ieee80211(struct net_device *dev, int monitor);
extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
extern void unregister_ieee80211(struct libipw_device *ieee);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,

14
drivers/net/wireless/ipw2x00/libipw_module.c
View File

@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor)
libipw_networks_free(ieee);
/* free cfg80211 resources */
if (!monitor) {
wiphy_unregister(ieee->wdev.wiphy);
kfree(ieee->a_band.channels);
kfree(ieee->bg_band.channels);
if (!monitor)
wiphy_free(ieee->wdev.wiphy);
}
free_netdev(dev);
}
void unregister_ieee80211(struct libipw_device *ieee)
{
wiphy_unregister(ieee->wdev.wiphy);
kfree(ieee->a_band.channels);
kfree(ieee->bg_band.channels);
}
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
@ -330,3 +333,4 @@ module_init(libipw_init);
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
EXPORT_SYMBOL(unregister_ieee80211);

2
drivers/net/wireless/libertas/if_usb.c
View File

@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
/* Fill the receive configuration URB and initialise the Rx call back */
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
(void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
skb->data + IPFIELD_ALIGN_OFFSET,
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
cardp);

5
drivers/net/wireless/rt2x00/rt73usb.c
View File

@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = {
{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
/* MSI */
{ USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ovislink */
{ USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = {
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
/* WideTell */
{ USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
/* Zcom */
{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
/* ZyXEL */

8
drivers/serial/serial_cs.c
View File

@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),

6
firmware/Makefile
View File

@ -69,11 +69,13 @@ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
cis/DP83903.cis cis/NE2K.cis \
cis/tamarack.cis
cis/tamarack.cis cis/PE-200.cis
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
cis/COMpad2.cis cis/COMpad4.cis
cis/COMpad2.cis cis/COMpad4.cis \
cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
cis/SW_8xx_SER.cis
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin

4
firmware/WHENCE
View File

@ -600,6 +600,7 @@ File: cis/LA-PCM.cis
cis/DP83903.cis
cis/NE2K.cis
cis/tamarack.cis
cis/PE-200.cis
Licence: GPL
@ -633,6 +634,9 @@ File: cis/MT5634ZLX.cis
cis/RS-COM-2P.cis
cis/COMpad2.cis
cis/COMpad4.cis
cis/SW_555_SER.cis
cis/SW_7xx_SER.cis
cis/SW_8xx_SER.cis
Licence: GPL

9
firmware/cis/PE-200.cis.ihex Normal file
View File

@ -0,0 +1,9 @@
:1000000001030000FF151E0401504D582020200060
:1000100050452D3230300045544845524E4554002D
:1000200052303100FF210206031A050101000101CF
:100030001B0EC181190155E051000F100F30FFFF59
:040040001400FF00A9
:00000001FF
#
# Replacement CIS for PE-200 ethernet card
#

12
firmware/cis/SW_555_SER.cis.ihex Normal file
View File

@ -0,0 +1,12 @@
:100000000101FF17034100FF20043F0110072102F7
:100010000200152A070053696572726120576972E0
:10002000656C657373004169724361726420353594
:1000300035004135353500526576203100FF1A050F
:1000400001030007731B0BE00118A360F8030730DE
:10005000BC3F1B08A10108A360F802071B08A2010E
:1000600008A360E803071B08A30108A360E80207D0
:0A0070001B04A40108231400FF0084
:00000001FF
#
# Replacement CIS for AC555 provided by Sierra Wireless
#

13
firmware/cis/SW_7xx_SER.cis.ihex Normal file
View File

@ -0,0 +1,13 @@
:100000000101FF17034100FF2004920110072102A4
:1000100002001537070053696572726120576972D3
:10002000656C6573730041433731302F4143373579
:10003000300047505253204E6574776F726B2041E9
:1000400064617074657200523100FF1A050103008B
:1000500007731B10E00119784D555D25A360F80367
:100060000730BC861B08A10108A360F802071B0823
:10007000A20108A360E803071B08A30108A360E826
:0C00800002071B04A40108231400FF0069
:00000001FF
#
# Replacement CIS for AC7xx provided by Sierra Wireless
#

13
firmware/cis/SW_8xx_SER.cis.ihex Normal file
View File

@ -0,0 +1,13 @@
:100000000101FF17034100FF2004920110072102A4
:100010000200152F070053696572726120576972DB
:10002000656C657373004143383530003347204EAB
:100030006574776F726B20416461707465720052F1
:100040003100FF1A0501030007731B10E001197846
:100050004D555D25A360F8480730BC861B08A101FB
:1000600008A360F847071B08A20108A360E8480737
:100070001B08A30108A360E847071B04A401082389
:040080001400FF0069
:00000001FF
#
# Replacement CIS for AC8xx provided by Sierra Wireless
#

6
include/linux/skbuff.h
View File

@ -354,8 +354,8 @@ struct sk_buff {
ipvs_property:1,
peeked:1,
nf_trace:1;
__be16 protocol:16;
kmemcheck_bitfield_end(flags1);
__be16 protocol;
void (*destructor)(struct sk_buff *skb);
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
@ -367,7 +367,6 @@ struct sk_buff {
#endif
int iif;
__u16 queue_mapping;
#ifdef CONFIG_NET_SCHED
__u16 tc_index; /* traffic control index */
#ifdef CONFIG_NET_CLS_ACT
@ -376,6 +375,7 @@ struct sk_buff {
#endif
kmemcheck_bitfield_begin(flags2);
__u16 queue_mapping:16;
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
@ -1757,6 +1757,8 @@ extern int skb_copy_datagram_const_iovec(const struct sk_buff *from,
int to_offset,
int size);
extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb);
extern void skb_free_datagram_locked(struct sock *sk,
struct sk_buff *skb);
extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
unsigned int flags);
extern __wsum skb_checksum(const struct sk_buff *skb, int offset,

3
include/net/ip_fib.h
View File

@ -210,7 +210,8 @@ extern struct fib_table *fib_get_table(struct net *net, u32 id);
extern const struct nla_policy rtm_ipv4_policy[];
extern void ip_fib_init(void);
extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
struct net_device *dev, __be32 *spec_dst, u32 *itag);
struct net_device *dev, __be32 *spec_dst,
u32 *itag, u32 mark);
extern void fib_select_default(struct net *net, const struct flowi *flp,
struct fib_result *res);

10
net/core/datagram.c
View File

@ -224,6 +224,15 @@ void skb_free_datagram(struct sock *sk, struct sk_buff *skb)
consume_skb(skb);
sk_mem_reclaim_partial(sk);
}
EXPORT_SYMBOL(skb_free_datagram);
void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb)
{
lock_sock(sk);
skb_free_datagram(sk, skb);
release_sock(sk);
}
EXPORT_SYMBOL(skb_free_datagram_locked);
/**
* skb_kill_datagram - Free a datagram skbuff forcibly
@ -752,5 +761,4 @@ unsigned int datagram_poll(struct file *file, struct socket *sock,
EXPORT_SYMBOL(datagram_poll);
EXPORT_SYMBOL(skb_copy_and_csum_datagram_iovec);
EXPORT_SYMBOL(skb_copy_datagram_iovec);
EXPORT_SYMBOL(skb_free_datagram);
EXPORT_SYMBOL(skb_recv_datagram);

5
net/ipv4/fib_frontend.c
View File

@ -229,14 +229,17 @@ unsigned int inet_dev_addr_type(struct net *net, const struct net_device *dev,
*/
int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
struct net_device *dev, __be32 *spec_dst, u32 *itag)
struct net_device *dev, __be32 *spec_dst,
u32 *itag, u32 mark)
{
struct in_device *in_dev;
struct flowi fl = { .nl_u = { .ip4_u =
{ .daddr = src,
.saddr = dst,
.tos = tos } },
.mark = mark,
.iif = oif };
struct fib_result res;
int no_addr, rpf;
int ret;

28
net/ipv4/ip_gre.c
View File

@ -1464,7 +1464,7 @@ static void ipgre_tap_setup(struct net_device *dev)
ether_setup(dev);
dev->netdev_ops = &ipgre_netdev_ops;
dev->netdev_ops = &ipgre_tap_netdev_ops;
dev->destructor = free_netdev;
dev->iflink = 0;
@ -1525,25 +1525,29 @@ static int ipgre_changelink(struct net_device *dev, struct nlattr *tb[],
if (t->dev != dev)
return -EEXIST;
} else {
unsigned nflags = 0;
t = nt;
if (ipv4_is_multicast(p.iph.daddr))
nflags = IFF_BROADCAST;
else if (p.iph.daddr)
nflags = IFF_POINTOPOINT;
if (dev->type != ARPHRD_ETHER) {
unsigned nflags = 0;
if ((dev->flags ^ nflags) &
(IFF_POINTOPOINT | IFF_BROADCAST))
return -EINVAL;
if (ipv4_is_multicast(p.iph.daddr))
nflags = IFF_BROADCAST;
else if (p.iph.daddr)
nflags = IFF_POINTOPOINT;
if ((dev->flags ^ nflags) &
(IFF_POINTOPOINT | IFF_BROADCAST))
return -EINVAL;
}
ipgre_tunnel_unlink(ign, t);
t->parms.iph.saddr = p.iph.saddr;
t->parms.iph.daddr = p.iph.daddr;
t->parms.i_key = p.i_key;
memcpy(dev->dev_addr, &p.iph.saddr, 4);
memcpy(dev->broadcast, &p.iph.daddr, 4);
if (dev->type != ARPHRD_ETHER) {
memcpy(dev->dev_addr, &p.iph.saddr, 4);
memcpy(dev->broadcast, &p.iph.daddr, 4);
}
ipgre_tunnel_link(ign, t);
netdev_state_change(dev);
}

8
net/ipv4/route.c
View File

@ -1854,7 +1854,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
goto e_inval;
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
} else if (fib_validate_source(saddr, 0, tos, 0,
dev, &spec_dst, &itag) < 0)
dev, &spec_dst, &itag, 0) < 0)
goto e_inval;
rth = dst_alloc(&ipv4_dst_ops);
@ -1967,7 +1967,7 @@ static int __mkroute_input(struct sk_buff *skb,
err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res),
in_dev->dev, &spec_dst, &itag);
in_dev->dev, &spec_dst, &itag, skb->mark);
if (err < 0) {
ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr,
saddr);
@ -2141,7 +2141,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
int result;
result = fib_validate_source(saddr, daddr, tos,
net->loopback_dev->ifindex,
dev, &spec_dst, &itag);
dev, &spec_dst, &itag, skb->mark);
if (result < 0)
goto martian_source;
if (result)
@ -2170,7 +2170,7 @@ brd_input:
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
else {
err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
&itag);
&itag, skb->mark);
if (err < 0)
goto martian_source;
if (err)

4
net/ipv4/udp.c
View File

@ -999,9 +999,7 @@ try_again:
err = ulen;
out_free:
lock_sock(sk);
skb_free_datagram(sk, skb);
release_sock(sk);
skb_free_datagram_locked(sk, skb);
out:
return err;

4
net/ipv6/udp.c
View File

@ -288,9 +288,7 @@ try_again:
err = ulen;
out_free:
lock_sock(sk);
skb_free_datagram(sk, skb);
release_sock(sk);
skb_free_datagram_locked(sk, skb);
out:
return err;

19
net/mac80211/agg-tx.c
View File

@ -666,26 +666,25 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
state = &sta->ampdu_mlme.tid_state_tx[tid];
del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
spin_lock_bh(&sta->lock);
if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
spin_unlock_bh(&sta->lock);
return;
}
if (!(*state & HT_ADDBA_REQUESTED_MSK))
goto timer_still_needed;
if (mgmt->u.action.u.addba_resp.dialog_token !=
sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
spin_unlock_bh(&sta->lock);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
return;
goto timer_still_needed;
}
del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
== WLAN_STATUS_SUCCESS) {
u8 curstate = *state;
@ -699,5 +698,11 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local,
} else {
___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
}
goto out;
timer_still_needed:
add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
out:
spin_unlock_bh(&sta->lock);
}

6
net/mac80211/cfg.c
View File

@ -72,6 +72,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
struct ieee80211_sub_if_data *sdata;
int ret;
if (netif_running(dev))
return -EBUSY;
if (!nl80211_type_check(type))
return -EINVAL;
@ -81,9 +84,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
if (ret)
return ret;
if (netif_running(sdata->dev))
return -EBUSY;
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,

2
net/mac80211/ht.c
View File

@ -153,7 +153,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
if (net_ratelimit())
printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n",
mgmt->sa, initiator ? "initiator" : "recipient", tid,
mgmt->u.action.u.delba.reason_code);
le16_to_cpu(mgmt->u.action.u.delba.reason_code));
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (initiator == WLAN_BACK_INITIATOR)

6
net/mac80211/ibss.c
View File

@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
u8 *pos;
struct ieee80211_supported_band *sband;
struct cfg80211_bss *bss;
u32 bss_change;
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
@ -177,8 +178,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
mod_timer(&ifibss->timer,
round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
mgmt, skb->len, 0, GFP_KERNEL);
bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
mgmt, skb->len, 0, GFP_KERNEL);
cfg80211_put_bss(bss);
cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
}

10
net/sunrpc/svcsock.c
View File

@ -111,7 +111,7 @@ static void svc_release_skb(struct svc_rqst *rqstp)
rqstp->rq_xprt_ctxt = NULL;
dprintk("svc: service %p, releasing skb %p\n", rqstp, skb);
skb_free_datagram(svsk->sk_sk, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
}
}
@ -578,7 +578,7 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
"svc: received unknown control message %d/%d; "
"dropping RPC reply datagram\n",
cmh->cmsg_level, cmh->cmsg_type);
skb_free_datagram(svsk->sk_sk, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
@ -588,18 +588,18 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp)
if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) {
local_bh_enable();
/* checksum error */
skb_free_datagram(svsk->sk_sk, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
local_bh_enable();
skb_free_datagram(svsk->sk_sk, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
} else {
/* we can use it in-place */
rqstp->rq_arg.head[0].iov_base = skb->data +
sizeof(struct udphdr);
rqstp->rq_arg.head[0].iov_len = len;
if (skb_checksum_complete(skb)) {
skb_free_datagram(svsk->sk_sk, skb);
skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
rqstp->rq_xprt_ctxt = skb;

7
net/wireless/sme.c
View File

@ -165,7 +165,7 @@ void cfg80211_conn_work(struct work_struct *work)
struct cfg80211_registered_device *rdev =
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
u8 bssid[ETH_ALEN];
u8 bssid_buf[ETH_ALEN], *bssid = NULL;
rtnl_lock();
cfg80211_lock_rdev(rdev);
@ -181,7 +181,10 @@ void cfg80211_conn_work(struct work_struct *work)
wdev_unlock(wdev);
continue;
}
memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN);
if (wdev->conn->params.bssid) {
memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
bssid = bssid_buf;
}
if (cfg80211_conn_do_work(wdev))
__cfg80211_connect_result(
wdev->netdev, bssid,