android_kernel_sony_msm8994.../include/asm-s390/system.h
Gerald Schaefer c1821c2e97 [S390] noexec protection
This provides a noexec protection on s390 hardware. Our hardware does
not have any bits left in the pte for a hw noexec bit, so this is a
different approach using shadow page tables and a special addressing
mode that allows separate address spaces for code and data.

As a special feature of our "secondary-space" addressing mode, separate
page tables can be specified for the translation of data addresses
(storage operands) and instruction addresses. The shadow page table is
used for the instruction addresses and the standard page table for the
data addresses.
The shadow page table is linked to the standard page table by a pointer
in page->lru.next of the struct page corresponding to the page that
contains the standard page table (since page->private is not really
private with the pte_lock and the page table pages are not in the LRU
list).
Depending on the software bits of a pte, it is either inserted into
both page tables or just into the standard (data) page table. Pages of
a vma that does not have the VM_EXEC bit set get mapped only in the
data address space. Any try to execute code on such a page will cause a
page translation exception. The standard reaction to this is a SIGSEGV
with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn)
and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the
kernel to the signal stack frame. Unfortunately, the signal return
mechanism cannot be modified to use an SA_RESTORER because the
exception unwinding code depends on the system call opcode stored
behind the signal stack frame.

This feature requires that user space is executed in secondary-space
mode and the kernel in home-space mode, which means that the addressing
modes need to be switched and that the noexec protection only works
for user space.
After switching the addressing modes, we cannot use the mvcp/mvcs
instructions anymore to copy between kernel and user space. A new
mvcos instruction has been added to the z9 EC/BC hardware which allows
to copy between arbitrary address spaces, but on older hardware the
page tables need to be walked manually.

Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 21:18:17 +01:00

402 lines
9.5 KiB
C

/*
* include/asm-s390/system.h
*
* S390 version
* Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
*
* Derived from "include/asm-i386/system.h"
*/
#ifndef __ASM_SYSTEM_H
#define __ASM_SYSTEM_H
#include <linux/kernel.h>
#include <asm/types.h>
#include <asm/ptrace.h>
#include <asm/setup.h>
#include <asm/processor.h>
#ifdef __KERNEL__
struct task_struct;
extern struct task_struct *__switch_to(void *, void *);
static inline void save_fp_regs(s390_fp_regs *fpregs)
{
asm volatile(
" std 0,8(%1)\n"
" std 2,24(%1)\n"
" std 4,40(%1)\n"
" std 6,56(%1)"
: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
if (!MACHINE_HAS_IEEE)
return;
asm volatile(
" stfpc 0(%1)\n"
" std 1,16(%1)\n"
" std 3,32(%1)\n"
" std 5,48(%1)\n"
" std 7,64(%1)\n"
" std 8,72(%1)\n"
" std 9,80(%1)\n"
" std 10,88(%1)\n"
" std 11,96(%1)\n"
" std 12,104(%1)\n"
" std 13,112(%1)\n"
" std 14,120(%1)\n"
" std 15,128(%1)\n"
: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
}
static inline void restore_fp_regs(s390_fp_regs *fpregs)
{
asm volatile(
" ld 0,8(%0)\n"
" ld 2,24(%0)\n"
" ld 4,40(%0)\n"
" ld 6,56(%0)"
: : "a" (fpregs), "m" (*fpregs));
if (!MACHINE_HAS_IEEE)
return;
asm volatile(
" lfpc 0(%0)\n"
" ld 1,16(%0)\n"
" ld 3,32(%0)\n"
" ld 5,48(%0)\n"
" ld 7,64(%0)\n"
" ld 8,72(%0)\n"
" ld 9,80(%0)\n"
" ld 10,88(%0)\n"
" ld 11,96(%0)\n"
" ld 12,104(%0)\n"
" ld 13,112(%0)\n"
" ld 14,120(%0)\n"
" ld 15,128(%0)\n"
: : "a" (fpregs), "m" (*fpregs));
}
static inline void save_access_regs(unsigned int *acrs)
{
asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory");
}
static inline void restore_access_regs(unsigned int *acrs)
{
asm volatile("lam 0,15,0(%0)" : : "a" (acrs));
}
#define switch_to(prev,next,last) do { \
if (prev == next) \
break; \
save_fp_regs(&prev->thread.fp_regs); \
restore_fp_regs(&next->thread.fp_regs); \
save_access_regs(&prev->thread.acrs[0]); \
restore_access_regs(&next->thread.acrs[0]); \
prev = __switch_to(prev,next); \
} while (0)
/*
* On SMP systems, when the scheduler does migration-cost autodetection,
* it needs a way to flush as much of the CPU's caches as possible.
*
* TODO: fill this in!
*/
static inline void sched_cacheflush(void)
{
}
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
extern void account_vtime(struct task_struct *);
extern void account_tick_vtime(struct task_struct *);
extern void account_system_vtime(struct task_struct *);
#else
#define account_vtime(x) do { /* empty */ } while (0)
#endif
#ifdef CONFIG_PFAULT
extern void pfault_irq_init(void);
extern int pfault_init(void);
extern void pfault_fini(void);
#else /* CONFIG_PFAULT */
#define pfault_irq_init() do { } while (0)
#define pfault_init() ({-1;})
#define pfault_fini() do { } while (0)
#endif /* CONFIG_PFAULT */
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
account_vtime(prev); \
} while (0)
#define nop() asm volatile("nop")
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) __ret; \
__ret = (__typeof__(*(ptr))) \
__xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \
__ret; \
})
static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
{
unsigned long addr, old;
int shift;
switch (size) {
case 1:
addr = (unsigned long) ptr;
shift = (3 ^ (addr & 3)) << 3;
addr ^= addr & 3;
asm volatile(
" l %0,0(%4)\n"
"0: lr 0,%0\n"
" nr 0,%3\n"
" or 0,%2\n"
" cs %0,0,0(%4)\n"
" jl 0b\n"
: "=&d" (old), "=m" (*(int *) addr)
: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
"m" (*(int *) addr) : "memory", "cc", "0");
x = old >> shift;
break;
case 2:
addr = (unsigned long) ptr;
shift = (2 ^ (addr & 2)) << 3;
addr ^= addr & 2;
asm volatile(
" l %0,0(%4)\n"
"0: lr 0,%0\n"
" nr 0,%3\n"
" or 0,%2\n"
" cs %0,0,0(%4)\n"
" jl 0b\n"
: "=&d" (old), "=m" (*(int *) addr)
: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
"m" (*(int *) addr) : "memory", "cc", "0");
x = old >> shift;
break;
case 4:
asm volatile(
" l %0,0(%3)\n"
"0: cs %0,%2,0(%3)\n"
" jl 0b\n"
: "=&d" (old), "=m" (*(int *) ptr)
: "d" (x), "a" (ptr), "m" (*(int *) ptr)
: "memory", "cc");
x = old;
break;
#ifdef __s390x__
case 8:
asm volatile(
" lg %0,0(%3)\n"
"0: csg %0,%2,0(%3)\n"
" jl 0b\n"
: "=&d" (old), "=m" (*(long *) ptr)
: "d" (x), "a" (ptr), "m" (*(long *) ptr)
: "memory", "cc");
x = old;
break;
#endif /* __s390x__ */
}
return x;
}
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
#define cmpxchg(ptr,o,n)\
((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
(unsigned long)(n),sizeof(*(ptr))))
static inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
{
unsigned long addr, prev, tmp;
int shift;
switch (size) {
case 1:
addr = (unsigned long) ptr;
shift = (3 ^ (addr & 3)) << 3;
addr ^= addr & 3;
asm volatile(
" l %0,0(%4)\n"
"0: nr %0,%5\n"
" lr %1,%0\n"
" or %0,%2\n"
" or %1,%3\n"
" cs %0,%1,0(%4)\n"
" jnl 1f\n"
" xr %1,%0\n"
" nr %1,%5\n"
" jnz 0b\n"
"1:"
: "=&d" (prev), "=&d" (tmp)
: "d" (old << shift), "d" (new << shift), "a" (ptr),
"d" (~(255 << shift))
: "memory", "cc");
return prev >> shift;
case 2:
addr = (unsigned long) ptr;
shift = (2 ^ (addr & 2)) << 3;
addr ^= addr & 2;
asm volatile(
" l %0,0(%4)\n"
"0: nr %0,%5\n"
" lr %1,%0\n"
" or %0,%2\n"
" or %1,%3\n"
" cs %0,%1,0(%4)\n"
" jnl 1f\n"
" xr %1,%0\n"
" nr %1,%5\n"
" jnz 0b\n"
"1:"
: "=&d" (prev), "=&d" (tmp)
: "d" (old << shift), "d" (new << shift), "a" (ptr),
"d" (~(65535 << shift))
: "memory", "cc");
return prev >> shift;
case 4:
asm volatile(
" cs %0,%2,0(%3)\n"
: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
: "memory", "cc");
return prev;
#ifdef __s390x__
case 8:
asm volatile(
" csg %0,%2,0(%3)\n"
: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
: "memory", "cc");
return prev;
#endif /* __s390x__ */
}
return old;
}
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
* to devices.
*
* This is very similar to the ppc eieio/sync instruction in that is
* does a checkpoint syncronisation & makes sure that
* all memory ops have completed wrt other CPU's ( see 7-15 POP DJB ).
*/
#define eieio() asm volatile("bcr 15,0" : : : "memory")
#define SYNC_OTHER_CORES(x) eieio()
#define mb() eieio()
#define rmb() eieio()
#define wmb() eieio()
#define read_barrier_depends() do { } while(0)
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
#define set_mb(var, value) do { var = value; mb(); } while (0)
#ifdef __s390x__
#define __ctl_load(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" lctlg %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
"m" (*(addrtype *)(array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctg %2,%3,0(%1)\n" \
: "=m" (*(addrtype *)(array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
#else /* __s390x__ */
#define __ctl_load(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" lctl %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
"m" (*(addrtype *)(array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctl %2,%3,0(%1)\n" \
: "=m" (*(addrtype *)(array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
#endif /* __s390x__ */
#define __ctl_set_bit(cr, bit) ({ \
unsigned long __dummy; \
__ctl_store(__dummy, cr, cr); \
__dummy |= 1UL << (bit); \
__ctl_load(__dummy, cr, cr); \
})
#define __ctl_clear_bit(cr, bit) ({ \
unsigned long __dummy; \
__ctl_store(__dummy, cr, cr); \
__dummy &= ~(1UL << (bit)); \
__ctl_load(__dummy, cr, cr); \
})
#include <linux/irqflags.h>
/*
* Use to set psw mask except for the first byte which
* won't be changed by this function.
*/
static inline void
__set_psw_mask(unsigned long mask)
{
__load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8)));
}
#define local_mcck_enable() __set_psw_mask(psw_kernel_bits)
#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
#ifdef CONFIG_SMP
extern void smp_ctl_set_bit(int cr, int bit);
extern void smp_ctl_clear_bit(int cr, int bit);
#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
#else
#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
#endif /* CONFIG_SMP */
extern void (*_machine_restart)(char *command);
extern void (*_machine_halt)(void);
extern void (*_machine_power_off)(void);
#define arch_align_stack(x) (x)
#endif /* __KERNEL__ */
#endif