Genesis-Plus-GX/core/memz80.c

803 lines
19 KiB
C

/***************************************************************************************
* Genesis Plus
* Z80 bus handlers (Genesis & Master System modes)
*
* Support for SG-1000, Mark-III, Master System, Game Gear & Mega Drive ports access
*
* Copyright (C) 1998-2003 Charles Mac Donald (original code)
* Copyright (C) 2007-2024 Eke-Eke (Genesis Plus GX)
*
* Redistribution and use of this code or any derivative works are permitted
* provided that the following conditions are met:
*
* - Redistributions may not be sold, nor may they be used in a commercial
* product or activity.
*
* - Redistributions that are modified from the original source must include the
* complete source code, including the source code for all components used by a
* binary built from the modified sources. However, as a special exception, the
* source code distributed need not include anything that is normally distributed
* (in either source or binary form) with the major components (compiler, kernel,
* and so on) of the operating system on which the executable runs, unless that
* component itself accompanies the executable.
*
* - Redistributions must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************/
#include "shared.h"
/*--------------------------------------------------------------------------*/
/* Handlers for access to unused addresses and those which make the */
/* machine lock up. */
/*--------------------------------------------------------------------------*/
INLINE void z80_unused_w(unsigned int address, unsigned char data)
{
#ifdef LOGERROR
error("Z80 unused write %04X = %02X (%x)\n", address, data, Z80.pc.w.l);
#endif
}
INLINE unsigned char z80_unused_r(unsigned int address)
{
#ifdef LOGERROR
error("Z80 unused read %04X (%x)\n", address, Z80.pc.w.l);
#endif
return 0xFF;
}
INLINE void z80_lockup_w(unsigned int address, unsigned char data)
{
#ifdef LOGERROR
error("Z80 lockup write %04X = %02X (%x)\n", address, data, Z80.pc.w.l);
#endif
if (!config.force_dtack)
{
Z80.cycles = 0xFFFFFFFF;
zstate = 0;
}
}
INLINE unsigned char z80_lockup_r(unsigned int address)
{
#ifdef LOGERROR
error("Z80 lockup read %04X (%x)\n", address, Z80.pc.w.l);
#endif
if (!config.force_dtack)
{
Z80.cycles = 0xFFFFFFFF;
zstate = 0;
}
return 0xFF;
}
/*--------------------------------------------------------------------------*/
/* Z80 Memory handlers (Genesis mode) */
/*--------------------------------------------------------------------------*/
static void z80_request_68k_bus_access(void)
{
/* check if 68k bus is accessed by VDP DMA */
if ((Z80.cycles < dma_endCycles) && (dma_type < 2))
{
/* force Z80 to wait until end of DMA */
Z80.cycles = dma_endCycles;
/* check if DMA is not finished at the end of current timeframe */
if (dma_length)
{
/* indicate Z80 will still be waiting for 68k bus at the end of current DMA timeframe */
zstate |= 4;
}
}
/* approximate 68k wait-states during Z80 access to 68k bus (cf https://docs.google.com/document/d/1ST9GbFfPnIjLT5loytFCm3pB0kWQ1Oe34DCBBV8saY8) */
/* value is adjusted to get ride of graphical glitches in Rick Dangerous 2 title screen when bus refresh delays are also emulated and still get */
/* "M68K DELAY ON Z80 ROM READ" test "passed" in Ti_'s test ROM (misc_test.bin), although the measured delay value is still slightly too high. */
m68k.cycles += ((Z80.cycles % 7) + 68);
/* average Z80 wait-states when accessing 68k bus (cf https://docs.google.com/document/d/1ST9GbFfPnIjLT5loytFCm3pB0kWQ1Oe34DCBBV8saY8) */
Z80.cycles += (3 * 15);
}
unsigned char z80_memory_r(unsigned int address)
{
switch((address >> 13) & 7)
{
case 0: /* $0000-$3FFF: Z80 RAM (8K mirrored) */
case 1:
{
return zram[address & 0x1FFF];
}
case 2: /* $4000-$5FFF: YM2612 */
{
return fm_read(Z80.cycles, address & 3);
}
case 3: /* $7F00-$7FFF: VDP */
{
if ((address >> 8) == 0x7F)
{
/* request access to 68k bus */
z80_request_68k_bus_access();
/* read from $C00000-$C0FFFF area */
return (*zbank_memory_map[0xc0].read)(address);
}
return z80_unused_r(address);
}
default: /* $8000-$FFFF: 68k bank (32K) */
{
/* request access to 68k bus */
z80_request_68k_bus_access();
/* read from 68k banked area */
address = zbank | (address & 0x7FFF);
if (zbank_memory_map[address >> 16].read)
{
return (*zbank_memory_map[address >> 16].read)(address);
}
return READ_BYTE(m68k.memory_map[address >> 16].base, address & 0xFFFF);
}
}
}
void z80_memory_w(unsigned int address, unsigned char data)
{
switch((address >> 13) & 7)
{
case 0: /* $0000-$3FFF: Z80 RAM (8K mirrored) */
case 1:
{
zram[address & 0x1FFF] = data;
return;
}
case 2: /* $4000-$5FFF: YM2612 */
{
fm_write(Z80.cycles, address & 3, data);
return;
}
case 3: /* Bank register and VDP */
{
switch(address >> 8)
{
case 0x60: /* $6000-$60FF: Bank register */
{
gen_zbank_w(data & 1);
return;
}
case 0x7F: /* $7F00-$7FFF: VDP */
{
/* request access to 68k bus */
z80_request_68k_bus_access();
/* write to $C00000-$C0FFFF area */
(*zbank_memory_map[0xc0].write)(address, data);
return;
}
default:
{
z80_unused_w(address, data);
return;
}
}
}
default: /* $8000-$FFFF: 68k bank (32K) */
{
/* request access to 68k bus */
z80_request_68k_bus_access();
/* write to 68k banked area */
address = zbank | (address & 0x7FFF);
if (zbank_memory_map[address >> 16].write)
{
(*zbank_memory_map[address >> 16].write)(address, data);
return;
}
WRITE_BYTE(m68k.memory_map[address >> 16].base, address & 0xFFFF, data);
return;
}
}
}
/*--------------------------------------------------------------------------*/
/* Unused Port handlers */
/* */
/* Ports are unused when not in Mark III compatibility mode. */
/* */
/* Genesis games that access ports anyway: */
/* Thunder Force IV reads port $BF in it's interrupt handler. */
/* */
/*--------------------------------------------------------------------------*/
unsigned char z80_unused_port_r(unsigned int port)
{
#if LOGERROR
error("Z80 unused read from port %04X (%x)\n", port, Z80.pc.w.l);
#endif
if (system_hw == SYSTEM_SMS)
{
unsigned int address = (Z80.pc.w.l - 1) & 0xFFFF;
return z80_readmap[address >> 10][address & 0x3FF];
}
return 0xFF;
}
void z80_unused_port_w(unsigned int port, unsigned char data)
{
#if LOGERROR
error("Z80 unused write to port %04X = %02X (%x)\n", port, data, Z80.pc.w.l);
#endif
}
/*--------------------------------------------------------------------------*/
/* MegaDrive / Genesis port handlers (Master System compatibility mode) */
/*--------------------------------------------------------------------------*/
void z80_md_port_w(unsigned int port, unsigned char data)
{
switch (port & 0xC1)
{
case 0x01:
{
io_z80_write(1, data, Z80.cycles + PBC_CYCLE_OFFSET);
return;
}
case 0x40:
case 0x41:
{
psg_write(Z80.cycles, data);
return;
}
case 0x80:
{
vdp_z80_data_w(data);
return;
}
case 0x81:
{
vdp_z80_ctrl_w(data);
return;
}
default:
{
port &= 0xFF;
/* write FM chip if enabled */
if ((port >= 0xF0) && (config.ym2413 & 1))
{
fm_write(Z80.cycles, port, data);
return;
}
z80_unused_port_w(port, data);
return;
}
}
}
unsigned char z80_md_port_r(unsigned int port)
{
switch (port & 0xC1)
{
case 0x40:
{
return ((vdp_hvc_r(Z80.cycles - 15) >> 8) & 0xFF);
}
case 0x41:
{
return (vdp_hvc_r(Z80.cycles - 15) & 0xFF);
}
case 0x80:
{
return vdp_z80_data_r();
}
case 0x81:
{
return vdp_z80_ctrl_r(Z80.cycles);
}
default:
{
port &= 0xFF;
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
{
return io_z80_read(port & 1);
}
/* read FM chip if enabled */
if ((port >= 0xF0) && (config.ym2413 & 1))
{
return fm_read(Z80.cycles, port);
}
return z80_unused_port_r(port);
}
}
}
/*--------------------------------------------------------------------------*/
/* Game Gear port handlers */
/*--------------------------------------------------------------------------*/
void z80_gg_port_w(unsigned int port, unsigned char data)
{
switch(port & 0xC1)
{
case 0x00:
case 0x01:
{
port &= 0xFF;
if (port < 0x07)
{
if (system_hw == SYSTEM_GG)
{
io_gg_write(port, data);
return;
}
}
/* full address range is decoded by Game Gear I/O chip (fixes G-LOC Air Battle) */
else if ((port == 0x3E) || (port == 0x3F))
{
io_z80_write(port & 1, data, Z80.cycles + SMS_CYCLE_OFFSET);
return;
}
z80_unused_port_w(port, data);
return;
}
case 0x40:
case 0x41:
{
psg_write(Z80.cycles, data);
return;
}
case 0x80:
{
vdp_z80_data_w(data);
return;
}
case 0x81:
{
vdp_sms_ctrl_w(data);
return;
}
default:
{
z80_unused_port_w(port & 0xFF, data);
return;
}
}
}
unsigned char z80_gg_port_r(unsigned int port)
{
switch(port & 0xC1)
{
case 0x00:
case 0x01:
{
port &= 0xFF;
if (port < 0x07)
{
if (system_hw == SYSTEM_GG)
{
return io_gg_read(port);
}
}
return z80_unused_port_r(port);
}
case 0x40:
{
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
}
case 0x41:
{
return (vdp_hvc_r(Z80.cycles) & 0xFF);
}
case 0x80:
{
return vdp_z80_data_r();
}
case 0x81:
{
return vdp_z80_ctrl_r(Z80.cycles);
}
default:
{
port &= 0xFF;
/* full address range is decoded by Game Gear I/O chip */
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
{
return io_z80_read(port & 1);
}
return z80_unused_port_r(port);
}
}
}
/*--------------------------------------------------------------------------*/
/* Master System port handlers */
/*--------------------------------------------------------------------------*/
void z80_ms_port_w(unsigned int port, unsigned char data)
{
switch (port & 0xC1)
{
case 0x00:
case 0x01:
{
/* full address range is decoded by 315-5297 I/O chip (fixes Super Tetris / Power Boggle Boggle) */
if ((region_code != REGION_JAPAN_NTSC) || ((port & 0xFE) == 0x3E))
{
io_z80_write(port & 1, data, Z80.cycles + SMS_CYCLE_OFFSET);
return;
}
z80_unused_port_w(port & 0xFF, data);
return;
}
case 0x40:
case 0x41:
{
psg_write(Z80.cycles, data);
return;
}
case 0x80:
{
vdp_z80_data_w(data);
return;
}
case 0x81:
{
vdp_sms_ctrl_w(data);
return;
}
default:
{
/* check if YM2413 chip is enabled */
if (config.ym2413 & 1)
{
if (region_code == REGION_JAPAN_NTSC)
{
/* 315-5297 I/O chip decodes full address range */
port &= 0xFF;
/* internal YM2413 chip */
if ((port == 0xF0) || (port == 0xF1))
{
fm_write(Z80.cycles, port, data);
return;
}
/* Audio control register (315-5297 I/O chip specific) */
if (port == 0xF2)
{
/* D1 D0
-----
0 0 : enable only PSG output (power-on default)
0 1 : enable only FM output
1 0 : disable both PSG & FM output
1 1 : enable both PSG and FM output
*/
psg_config(Z80.cycles, config.psg_preamp, ((data + 1) & 0x02) ? 0x00 : 0xFF);
fm_write(Z80.cycles, 0x02, data);
io_reg[6] = data;
return;
}
}
else if (!(port & 4))
{
/* external FM board */
fm_write(Z80.cycles, port, data);
return;
}
}
z80_unused_port_w(port & 0xFF, data);
return;
}
}
}
unsigned char z80_ms_port_r(unsigned int port)
{
switch (port & 0xC1)
{
case 0x00:
case 0x01:
{
return z80_unused_port_r(port & 0xFF);
}
case 0x40:
{
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
}
case 0x41:
{
return (vdp_hvc_r(Z80.cycles) & 0xFF);
}
case 0x80:
{
return vdp_z80_data_r();
}
case 0x81:
{
return vdp_z80_ctrl_r(Z80.cycles);
}
default:
{
if (region_code == REGION_JAPAN_NTSC)
{
/* 315-5297 I/O chip decodes full address range */
port &= 0xFF;
if (port == 0xF2)
{
/* D7-D5 : C-SYNC counter (not emulated)
D4-D2 : Always zero
D1 : Mute control bit 1
D0 : Mute control bit 0
*/
return io_reg[0x06] & 0x03;
}
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
{
/* read I/O ports if enabled */
if (!(io_reg[0x0E] & 0x04))
{
return io_z80_read(port & 1);
}
}
return z80_unused_port_r(port);
}
else
{
uint8 data = 0xFF;
/* read FM board if enabled */
if (!(port & 4) && (config.ym2413 & 1))
{
data = fm_read(Z80.cycles, port);
}
/* read I/O ports if enabled */
if (!(io_reg[0x0E] & 0x04))
{
data &= io_z80_read(port & 1);
}
return data;
}
}
}
}
/*--------------------------------------------------------------------------*/
/* Mark III port handlers */
/*--------------------------------------------------------------------------*/
void z80_m3_port_w(unsigned int port, unsigned char data)
{
switch (port & 0xC1)
{
case 0x00:
case 0x01:
{
z80_unused_port_w(port & 0xFF, data);
return;
}
case 0x40:
case 0x41:
{
psg_write(Z80.cycles, data);
return;
}
case 0x80:
{
vdp_z80_data_w(data);
return;
}
case 0x81:
{
vdp_sms_ctrl_w(data);
return;
}
default:
{
/* write to FM sound unit (FM-70) if enabled */
if (!(port & 4) && (config.ym2413 & 1))
{
fm_write(Z80.cycles, port, data);
/* FM output control "register" */
if (port & 2)
{
/* PSG output is automatically disabled (resp. enabled) by FM sound unit hardware if FM output is enabled (resp. disabled) */
psg_config(Z80.cycles, config.psg_preamp, (data & 0x01) ? 0x00 : 0xff);
}
return;
}
z80_unused_port_w(port & 0xFF, data);
return;
}
}
}
unsigned char z80_m3_port_r(unsigned int port)
{
switch (port & 0xC1)
{
case 0x00:
case 0x01:
{
return z80_unused_port_r(port & 0xFF);
}
case 0x40:
{
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
}
case 0x41:
{
return (vdp_hvc_r(Z80.cycles) & 0xFF);
}
case 0x80:
{
return vdp_z80_data_r();
}
case 0x81:
{
return vdp_z80_ctrl_r(Z80.cycles);
}
default:
{
/* read FM sound unit (FM-70) if enabled */
if (!(port & 4) && (config.ym2413 & 1))
{
/* I/O ports are automatically disabled by FM sound unit hardware */
return fm_read(Z80.cycles, port);
}
/* read I/O ports */
return io_z80_read(port & 1);
}
}
}
/*--------------------------------------------------------------------------*/
/* SG-1000 port handlers */
/*--------------------------------------------------------------------------*/
void z80_sg_port_w(unsigned int port, unsigned char data)
{
switch(port & 0xC1)
{
case 0x40:
case 0x41:
{
psg_write(Z80.cycles, data);
/* Z80 !WAIT input is tied to SN76489AN chip READY pin (held low for 32 clocks after each write access) */
Z80.cycles += (32 * 15);
return;
}
case 0x80:
{
vdp_z80_data_w(data);
return;
}
case 0x81:
{
vdp_tms_ctrl_w(data);
return;
}
default:
{
z80_unused_port_w(port & 0xFF, data);
return;
}
}
}
unsigned char z80_sg_port_r(unsigned int port)
{
switch (port & 0xC1)
{
case 0x80:
{
return vdp_z80_data_r();
}
case 0x81:
{
return vdp_z80_ctrl_r(Z80.cycles);
}
case 0xC0:
case 0xC1:
{
return io_z80_read(port & 1);
}
default:
{
return z80_unused_port_r(port & 0xFF);
}
}
}