linux: switch to linux-4.1 for generic/legacy

packages/linux/package.mk

@@ -39,10 +39,14 @@ case "$LINUX" in
     PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
     PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET imx6-status-led imx6-soc-fan"
     ;;
-  *)
+  4.0)
     PKG_VERSION="4.0.5"
     PKG_URL="http://www.kernel.org/pub/linux/kernel/v4.x/$PKG_NAME-$PKG_VERSION.tar.xz"
     ;;
+  *)
+    PKG_VERSION="4.1-rc8"
+    PKG_URL="http://www.kernel.org/pub/linux/kernel/v4.x/testing/$PKG_NAME-$PKG_VERSION.tar.xz"
+    ;;
 esac
 
 PKG_IS_ADDON="no"

packages/linux/patches/4.1-rc8/linux-003-no_dev_console.patch

@@ -0,0 +1,21 @@
+diff --git a/init/main.c b/init/main.c
+index 9484f4b..db55edd 100644
+--- a/init/main.c
++++ b/init/main.c
+@@ -880,8 +880,14 @@ static noinline void __init kernel_init_freeable(void)
+ 	do_basic_setup();
+ 
+ 	/* Open the /dev/console on the rootfs, this should never fail */
+-	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
+-		pr_err("Warning: unable to open an initial console.\n");
++	char *console = "/dev_console";
++
++	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0) {
++		sys_mknod(console, S_IFCHR|0600, (TTYAUX_MAJOR<<8)|1);
++		if (sys_open(console, O_RDWR, 0) < 0)
++			printk(KERN_WARNING "Warning: unable to open an initial console.\n");
++		sys_unlink(console);
++	}
+ 
+ 	(void) sys_dup(0);
+ 	(void) sys_dup(0);

packages/linux/patches/4.1-rc8/linux-051-ouya_controller_support.patch

@@ -0,0 +1,315 @@
+diff -Naur linux-3.19.orig/drivers/hid/hid-core.c linux-3.19/drivers/hid/hid-core.c
+--- linux-3.19.orig/drivers/hid/hid-core.c	2015-02-20 14:01:17.080322846 -0800
++++ linux-3.19/drivers/hid/hid-core.c	2015-02-20 14:03:30.375519421 -0800
+@@ -1884,6 +1884,7 @@
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
++	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_OUYA, USB_DEVICE_ID_OUYA_CONTROLLER) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_6000) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_1) },
+diff -Naur linux-3.19.orig/drivers/hid/hid-ids.h linux-3.19/drivers/hid/hid-ids.h
+--- linux-3.19.orig/drivers/hid/hid-ids.h	2015-02-20 14:01:17.080322846 -0800
++++ linux-3.19/drivers/hid/hid-ids.h	2015-02-20 14:03:30.382519482 -0800
+@@ -721,6 +721,9 @@
+ #define USB_DEVICE_ID_ORTEK_PKB1700	0x1700
+ #define USB_DEVICE_ID_ORTEK_WKB2000	0x2000
+ 
++#define USB_VENDOR_ID_OUYA		0x2836
++#define USB_DEVICE_ID_OUYA_CONTROLLER	0x0001
++
+ #define USB_VENDOR_ID_PLANTRONICS	0x047f
+ 
+ #define USB_VENDOR_ID_PANASONIC		0x04da
+diff -Naur linux-3.19.orig/drivers/hid/hid-ouya.c linux-3.19/drivers/hid/hid-ouya.c
+--- linux-3.19.orig/drivers/hid/hid-ouya.c	1969-12-31 16:00:00.000000000 -0800
++++ linux-3.19/drivers/hid/hid-ouya.c	2015-02-20 14:03:30.371519386 -0800
+@@ -0,0 +1,260 @@
++/*
++ *  HID driver for OUYA Game Controller(s)
++ *
++ *  Copyright (c) 2013 OUYA
++ */
++
++#include <linux/device.h>
++#include <linux/input.h>
++#include <linux/hid.h>
++#include <linux/module.h>
++
++#include "hid-ids.h"
++
++#define OUYA_TOUCHPAD_FIXUP     (1 << 0)
++
++struct ouya_sc {
++	unsigned long quirks;
++};
++
++/* Fixed report descriptor */
++static __u8 ouya_rdesc_fixed[] = {
++
++	0x05, 0x01,         /*  Usage Page (Desktop),           */
++	0x09, 0x05,         /*  Usage (Game Pad),               */
++
++	0xA1, 0x01,         /*  Collection (Application),       */
++	0x85, 0x07,         /*      Report ID (7),              */
++
++	0xA1, 0x00,         /*      Collection (Physical),      */
++	0x09, 0x30,         /*          Usage (X),              */
++	0x09, 0x31,         /*          Usage (Y),              */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x35, 0x00,         /*          Physical Minimum (0),   */
++	0x46, 0xFF, 0x00,   /*          Physical Maximum (255), */
++	0x95, 0x02,         /*          Report Count (2),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0xC0,               /*      End Collection,             */
++
++	0xA1, 0x00,         /*      Collection (Physical),      */
++	0x09, 0x33,         /*          Usage (Rx),             */
++	0x09, 0x34,         /*          Usage (Ry),             */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x35, 0x00,         /*          Physical Minimum (0),   */
++	0x46, 0xFF, 0x00,   /*          Physical Maximum (255), */
++	0x95, 0x02,         /*          Report Count (2),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0xC0,               /*      End Collection,             */
++
++	0xA1, 0x00,         /*      Collection (Physical),      */
++	0x09, 0x32,         /*          Usage (Z),              */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x35, 0x00,         /*          Physical Minimum (0),   */
++	0x46, 0xFF, 0x00,   /*          Physical Maximum (255), */
++	0x95, 0x01,         /*          Report Count (1),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0xC0,               /*      End Collection,             */
++
++	0xA1, 0x00,         /*      Collection (Physical),      */
++	0x09, 0x35,         /*          Usage (Rz),             */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x35, 0x00,         /*          Physical Minimum (0),   */
++	0x46, 0xFF, 0x00,   /*          Physical Maximum (255), */
++	0x95, 0x01,         /*          Report Count (1),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0xC0,               /*      End Collection,             */
++
++	0x05, 0x09,         /*      Usage Page (Button),        */
++	0x19, 0x01,         /*      Usage Minimum (01h),        */
++	0x29, 0x10,         /*      Usage Maximum (10h),        */
++	0x95, 0x10,         /*      Report Count (16),          */
++	0x75, 0x01,         /*      Report Size (1),            */
++	0x81, 0x02,         /*      Input (Variable),           */
++
++	/*   ORIGINAL REPORT DESCRIPTOR FOR TOUCHPAD INPUT  */
++    /* 06 00 ff a1 02 09 02 15 00 26 ff 00 35 00 46 ff 00 95 03 75 08 81 02 c0 */
++
++	0x06, 0x00, 0xFF,   /*      Usage Page (Custom),        */
++	0x09, 0x02,         /*      Usage (Mouse),              */
++	0x09, 0x01,         /*      Usage (Pointer),            */
++	0xA1, 0x00,         /*      Collection (Physical),      */
++	0x05, 0x09,         /*          Usage Page (Button),    */
++	0x19, 0x01,         /*          Usage Minimum (01h),    */
++	0x29, 0x03,         /*          Usage Maximum (03h),    */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x25, 0x01,         /*          Logical Maximum (1),    */
++	0x95, 0x03,         /*          Report Count (3),       */
++	0x75, 0x01,         /*          Report Size (1),        */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0x95, 0x01,         /*          Report Count (1),       */
++	0x75, 0x05,         /*          Report Size (5),        */
++	0x81, 0x01,         /*          Input (Constant),       */
++	0x05, 0x01,         /*          Usage Page (Desktop),   */
++	0x09, 0x30,         /*          Usage (X),              */
++	0x09, 0x31,         /*          Usage (Y),              */
++	0x15, 0x81,         /*          Logical Minimum (-127), */
++	0x25, 0x7f,         /*          Logical Maximum (127),  */
++	0x95, 0x02,         /*          Report Count (2),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x81, 0x06,         /*          Input (Relative),       */
++	0xC0,               /*      End Collection,             */
++
++	0x06, 0x00, 0xFF,   /*      Usage Page (Custom),        */
++	0xA1, 0x02,         /*      Collection (Logical),       */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x95, 0x07,         /*          Report Count (7),       */
++	0x46, 0xFF, 0x00,   /*          Physical Maximum (255), */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x09, 0x01,         /*          Usage (Pointer),        */
++	0x91, 0x02,         /*          Output (Variable),      */
++	0xC0,               /*      End Collection,             */
++
++	0xC0,               /*  End Collection                  */
++
++
++	0x06, 0x00, 0xFF,   /*  Usage Page (Custom),            */
++	0x05, 0x0C,         /*  Usage Page (Consumer),          */
++	0x09, 0x01,         /*  Usage (Consumer Control),       */
++
++	0xA1, 0x01,         /*  Collection (Application),       */
++	0x85, 0x03,         /*      Report ID (3),              */
++	0x05, 0x01,         /*      Usage Page (Desktop),       */
++	0x09, 0x06,         /*      Usage (Keyboard),           */
++	0xA1, 0x02,         /*      Collection (Logical),       */
++	0x05, 0x06,         /*          Usage Page (Generic),   */
++	0x09, 0x20,         /*          Usage (Battery Strgth), */
++	0x15, 0x00,         /*          Logical Minimum (0),    */
++	0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x95, 0x01,         /*          Report Count (1),       */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0x06, 0xBC, 0xFF,   /*          Usage Page (Custom),    */
++
++	0x0A, 0xAD, 0xBD,   /*  UNKNOWN */
++
++	0x75, 0x08,         /*          Report Size (8),        */
++	0x95, 0x06,         /*          Report Count (6),       */
++	0x81, 0x02,         /*          Input (Variable),       */
++	0xC0,               /*      End Collection,             */
++
++	0xC0,               /*  End Collection                  */
++	
++	0x00 
++};
++
++static __u8 *ouya_report_fixup(struct hid_device *hdev, __u8 *rdesc,
++		unsigned int *rsize)
++{
++	struct ouya_sc *sc = hid_get_drvdata(hdev);
++
++	if (sc->quirks & OUYA_TOUCHPAD_FIXUP) {
++		rdesc = ouya_rdesc_fixed;
++		*rsize = sizeof(ouya_rdesc_fixed);
++	}
++    return rdesc;
++}
++
++static int ouya_input_mapping(struct hid_device *hdev, struct hid_input *hi,
++			       struct hid_field *field, struct hid_usage *usage,
++			       unsigned long **bit, int *max)
++{
++	struct ouya_sc *sc = hid_get_drvdata(hdev);
++
++	if (!(sc->quirks & OUYA_TOUCHPAD_FIXUP)) {
++		return 0;
++	}
++
++	if ((usage->hid & 0x90000) == 0x90000 &&
++		(field->physical & 0xff000000) == 0xff000000 &&
++		usage->collection_index == 5 &&
++		field->report_count == 3) {
++
++		hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_MOUSE + (usage->hid - 0x90001));
++
++		return 1;
++	}
++
++	return 0;
++}
++
++static int ouya_probe(struct hid_device *hdev, const struct hid_device_id *id)
++{
++	int ret;
++	struct ouya_sc *sc;
++
++	sc = kzalloc(sizeof(*sc), GFP_KERNEL);
++	if (sc == NULL) {
++		hid_err(hdev, "can't alloc ouya descriptor\n");
++		return -ENOMEM;
++	}
++
++	if(((hdev->version & 0xff00) == 0x0100 && (hdev->version & 0xff) >= 0x04) ||
++		((hdev->version & 0xff00) == 0xe100 && (hdev->version & 0xff) >= 0x3a)) {
++		hid_info(hdev, "ouya controller - new version\n");
++		sc->quirks = OUYA_TOUCHPAD_FIXUP;	
++	} else {
++		sc->quirks = 0;	
++	}
++	hid_set_drvdata(hdev, sc);
++
++	ret = hid_parse(hdev);
++	if (ret) {
++		hid_err(hdev, "parse failed\n");
++		goto err_free;
++	}
++
++	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
++			HID_CONNECT_HIDDEV_FORCE);
++	if (ret) {
++		hid_err(hdev, "hw start failed\n");
++		goto err_free;
++	}
++
++	return 0;
++
++err_free:
++	kfree(sc);
++	return ret;
++}
++
++static void ouya_remove(struct hid_device *hdev)
++{
++	hid_hw_stop(hdev);
++	kfree(hid_get_drvdata(hdev));
++}
++
++static const struct hid_device_id ouya_devices[] = {
++	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_OUYA, USB_DEVICE_ID_OUYA_CONTROLLER) },
++	{ }
++};
++MODULE_DEVICE_TABLE(hid, ouya_devices);
++
++static struct hid_driver ouya_driver = {
++	.name = "ouya",
++	.id_table = ouya_devices,
++	.probe = ouya_probe,
++	.remove = ouya_remove,
++	.input_mapping = ouya_input_mapping,	
++	.report_fixup = ouya_report_fixup
++};
++
++static int __init ouya_init(void)
++{
++	return hid_register_driver(&ouya_driver);
++}
++
++static void __exit ouya_exit(void)
++{
++	hid_unregister_driver(&ouya_driver);
++}
++
++module_init(ouya_init);
++module_exit(ouya_exit);
+diff -Naur linux-3.19.orig/drivers/hid/Kconfig linux-3.19/drivers/hid/Kconfig
+--- linux-3.19.orig/drivers/hid/Kconfig	2015-02-20 14:01:17.081322855 -0800
++++ linux-3.19/drivers/hid/Kconfig	2015-02-20 14:03:30.381519473 -0800
+@@ -528,6 +528,12 @@
+ 	   - Ortek WKB-2000
+ 	   - Skycable wireless presenter
+ 
++config HID_OUYA
++	tristate "OUYA Game Controller"
++	depends on USB_HID
++	---help---
++	Support for OUYA Game Controller.
++
+ config HID_PANTHERLORD
+ 	tristate "Pantherlord/GreenAsia game controller"
+ 	depends on HID
+diff -Naur linux-3.19.orig/drivers/hid/Makefile linux-3.19/drivers/hid/Makefile
+--- linux-3.19.orig/drivers/hid/Makefile	2015-02-20 14:01:17.081322855 -0800
++++ linux-3.19/drivers/hid/Makefile	2015-02-20 14:03:30.382519482 -0800
+@@ -70,6 +70,7 @@
+ obj-$(CONFIG_HID_MULTITOUCH)	+= hid-multitouch.o
+ obj-$(CONFIG_HID_NTRIG)		+= hid-ntrig.o
+ obj-$(CONFIG_HID_ORTEK)		+= hid-ortek.o
++obj-$(CONFIG_HID_OUYA)		+= hid-ouya.o
+ obj-$(CONFIG_HID_PRODIKEYS)	+= hid-prodikeys.o
+ obj-$(CONFIG_HID_PANTHERLORD)	+= hid-pl.o
+ obj-$(CONFIG_HID_PENMOUNT)	+= hid-penmount.o

packages/linux/patches/4.1-rc8/linux-053-spinelplus-remote-0.2.patch

@@ -0,0 +1,161 @@
+diff -Naur linux-3.19/drivers/hid/hid-core.c linux-3.19.patch/drivers/hid/hid-core.c
+--- linux-3.19/drivers/hid/hid-core.c	2015-02-09 03:54:22.000000000 +0100
++++ linux-3.19.patch/drivers/hid/hid-core.c	2015-02-11 00:06:14.966131308 +0100
+@@ -1886,6 +1886,9 @@
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_6000) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_1) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_2) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS, USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_3) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
+ 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) },
+ #if IS_ENABLED(CONFIG_HID_ROCCAT)
+diff -Naur linux-3.19/drivers/hid/hid-ids.h linux-3.19.patch/drivers/hid/hid-ids.h
+--- linux-3.19/drivers/hid/hid-ids.h	2015-02-09 03:54:22.000000000 +0100
++++ linux-3.19.patch/drivers/hid/hid-ids.h	2015-02-11 00:04:45.885977057 +0100
+@@ -743,6 +743,9 @@
+ 
+ #define USB_VENDOR_ID_PHILIPS		0x0471
+ #define USB_DEVICE_ID_PHILIPS_IEEE802154_DONGLE 0x0617
++#define USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_1	0x206c
++#define USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_2	0x20cc
++#define USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_3	0x0613
+ 
+ #define USB_VENDOR_ID_PI_ENGINEERING	0x05f3
+ #define USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL	0xff
+diff -Naur linux-3.19/drivers/hid/hid-spinelplus.c linux-3.19.patch/drivers/hid/hid-spinelplus.c
+--- linux-3.19/drivers/hid/hid-spinelplus.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-3.19.patch/drivers/hid/hid-spinelplus.c	2015-02-11 00:04:45.886977059 +0100
+@@ -0,0 +1,104 @@
++/*
++ *  HID driver for "PHILIPS MCE USB IR Receiver- Spinel plus" remotes
++ *
++ *  Copyright (c) 2010 Panagiotis Skintzos
++ *
++ *  Renamed to Spinel, cleanup and modified to also support
++ *  Spinel Plus 0471:20CC by Stephan Raue 2012.
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the Free
++ * Software Foundation; either version 2 of the License, or (at your option)
++ * any later version.
++ */
++
++#include <linux/device.h>
++#include <linux/input.h>
++#include <linux/hid.h>
++#include <linux/module.h>
++
++#include "hid-ids.h"
++
++#define spinelplus_map_key(c)	set_bit(EV_REP, hi->input->evbit); \
++						hid_map_usage_clear(hi, usage, bit, max, EV_KEY, (c))
++
++static int spinelplus_input_mapping(struct hid_device *hdev,
++		struct hid_input *hi, struct hid_field *field, struct hid_usage *usage,
++		unsigned long **bit, int *max)
++{
++	switch (usage->hid) {
++	case 0xffbc000d:	spinelplus_map_key(KEY_MEDIA);		break;
++	case 0xffbc0024:	spinelplus_map_key(KEY_MEDIA);		break;
++	case 0xffbc0027:	spinelplus_map_key(KEY_ZOOM);		break;
++	case 0xffbc0033:	spinelplus_map_key(KEY_HOME);		break;
++	case 0xffbc0035:	spinelplus_map_key(KEY_CAMERA);		break;
++	case 0xffbc0036:	spinelplus_map_key(KEY_EPG);		break;
++	case 0xffbc0037:	spinelplus_map_key(KEY_DVD);		break;
++	case 0xffbc0038:	spinelplus_map_key(KEY_HOME);		break;
++	case 0xffbc0039:	spinelplus_map_key(KEY_MP3);		break;
++	case 0xffbc003a:	spinelplus_map_key(KEY_VIDEO);		break;
++	case 0xffbc005a:	spinelplus_map_key(KEY_TEXT);		break;
++	case 0xffbc005b:	spinelplus_map_key(KEY_RED);		break;
++	case 0xffbc005c:	spinelplus_map_key(KEY_GREEN);		break;
++	case 0xffbc005d:	spinelplus_map_key(KEY_YELLOW);		break;
++	case 0xffbc005e:	spinelplus_map_key(KEY_BLUE);		break;
++	default:
++		return 0;
++	}
++	return 1;
++}
++
++static int spinelplus_probe(struct hid_device *hdev,
++		const struct hid_device_id *id)
++{
++	int ret;
++	/* Connect only to hid input (not hiddev & hidraw)*/
++	unsigned int cmask = HID_CONNECT_HIDINPUT;
++
++	ret = hid_parse(hdev);
++	if (ret) {
++		dev_err(&hdev->dev, "parse failed\n");
++		goto err_free;
++	}
++
++	ret = hid_hw_start(hdev, cmask);
++	if (ret) {
++		dev_err(&hdev->dev, "hw start failed\n");
++		goto err_free;
++	}
++
++	return 0;
++err_free:
++	return ret;
++}
++
++static const struct hid_device_id spinelplus_devices[] = {
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS,USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_1) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS,USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_2) },
++	{ HID_USB_DEVICE(USB_VENDOR_ID_PHILIPS,USB_DEVICE_ID_PHILIPS_SPINEL_PLUS_3) },
++	{ }
++};
++MODULE_DEVICE_TABLE(hid, spinelplus_devices);
++
++static struct hid_driver spinelplus_driver = {
++	.name = 		"SpinelPlus",
++	.id_table = 		spinelplus_devices,
++	.input_mapping = 	spinelplus_input_mapping,
++	.probe = 		spinelplus_probe,
++};
++
++static int __init spinelplus_init(void)
++{
++	return hid_register_driver(&spinelplus_driver);
++}
++
++static void __exit spinelplus_exit(void)
++{
++	hid_unregister_driver(&spinelplus_driver);
++}
++
++module_init(spinelplus_init);
++module_exit(spinelplus_exit);
++MODULE_LICENSE("GPL");
+diff -Naur linux-3.19/drivers/hid/Kconfig linux-3.19.patch/drivers/hid/Kconfig
+--- linux-3.19/drivers/hid/Kconfig	2015-02-09 03:54:22.000000000 +0100
++++ linux-3.19.patch/drivers/hid/Kconfig	2015-02-11 00:04:45.886977059 +0100
+@@ -702,6 +702,12 @@
+ 	---help---
+ 	Support for Steelseries SRW-S1 steering wheel
+ 
++config HID_SPINELPLUS
++	tristate "Spinel Plus remote control"
++	depends on USB_HID
++	---help---
++	  Say Y here if you have a Spinel Plus (0471:206c/20cc/0613) remote
++
+ config HID_SUNPLUS
+ 	tristate "Sunplus wireless desktop"
+ 	depends on HID
+diff -Naur linux-3.19/drivers/hid/Makefile linux-3.19.patch/drivers/hid/Makefile
+--- linux-3.19/drivers/hid/Makefile	2015-02-09 03:54:22.000000000 +0100
++++ linux-3.19.patch/drivers/hid/Makefile	2015-02-11 00:04:45.886977059 +0100
+@@ -107,6 +107,7 @@
+ obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
+ obj-$(CONFIG_HID_SONY)		+= hid-sony.o
+ obj-$(CONFIG_HID_SPEEDLINK)	+= hid-speedlink.o
++obj-$(CONFIG_HID_SPINELPLUS)	+= hid-spinelplus.o
+ obj-$(CONFIG_HID_STEELSERIES)	+= hid-steelseries.o
+ obj-$(CONFIG_HID_SUNPLUS)	+= hid-sunplus.o
+ obj-$(CONFIG_HID_GREENASIA)	+= hid-gaff.o

packages/linux/patches/4.1-rc8/linux-054-nuvoton_revert_d7b290a1056c5564eec8a1b169c6e84ff3.6.114c13.patch

@@ -0,0 +1,12 @@
+diff -Naur linux-3.0/drivers/media/rc/nuvoton-cir.c linux-3.0.patch/drivers/media/rc/nuvoton-cir.c
+--- linux-3.0/drivers/media/rc/nuvoton-cir.c	2011-07-22 04:17:23.000000000 +0200
++++ linux-3.0.patch/drivers/media/rc/nuvoton-cir.c	2011-07-22 21:30:48.374591146 +0200
+@@ -1110,7 +1110,7 @@
+ 	rdev->dev.parent = &pdev->dev;
+ 	rdev->driver_name = NVT_DRIVER_NAME;
+ 	rdev->map_name = RC_MAP_RC6_MCE;
+-	rdev->timeout = MS_TO_NS(100);
++	rdev->timeout = US_TO_NS(1000);
+ 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+ 	rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
+ #if 0

packages/linux/patches/4.1-rc8/linux-056-add_Adaptec_eHome_Infrared_Receiver.patch

@@ -0,0 +1,21 @@
+diff -Naur linux-3.17.1/drivers/media/rc/mceusb.c linux-3.17.1.patch/drivers/media/rc/mceusb.c
+--- linux-3.17.1/drivers/media/rc/mceusb.c	2014-10-15 12:29:30.000000000 +0200
++++ linux-3.17.1.patch/drivers/media/rc/mceusb.c	2014-10-16 11:45:57.480176874 +0200
+@@ -188,6 +188,8 @@
+ #define VENDOR_TWISTEDMELON	0x2596
+ #define VENDOR_HAUPPAUGE	0x2040
+ #define VENDOR_PCTV		0x2013
++#define VENDOR_ADAPTEC		0x03f3
++
+ 
+ enum mceusb_model_type {
+ 	MCE_GEN2 = 0,		/* Most boards */
+@@ -401,6 +403,8 @@
+ 	  .driver_info = HAUPPAUGE_CX_HYBRID_TV },
+ 	{ USB_DEVICE(VENDOR_PCTV, 0x025e),
+ 	  .driver_info = HAUPPAUGE_CX_HYBRID_TV },
++	/* Adaptec / HP eHome Receiver */
++	{ USB_DEVICE(VENDOR_ADAPTEC, 0x0094) },
+ 
+ 	/* Terminating entry */
+ 	{ }

packages/linux/patches/4.1-rc8/linux-057-Removed-MCE-customer-code-restriction-in-rc6-decode.patch

@@ -0,0 +1,28 @@
+--- linux/drivers/media/rc/ir-rc6-decoder.c	2012-11-25 22:08:13.148418669 -0800
++++ linux.patch/drivers/media/rc/ir-rc6-decoder.c	2012-11-25 22:07:48.864417975 -0800
+@@ -39,7 +39,6 @@
+ #define RC6_STARTBIT_MASK	0x08	/* for the header bits */
+ #define RC6_6A_MCE_TOGGLE_MASK	0x8000	/* for the body bits */
+ #define RC6_6A_LCC_MASK		0xffff0000 /* RC6-6A-32 long customer code mask */
+-#define RC6_6A_MCE_CC		0x800f0000 /* MCE customer code */
+ #ifndef CHAR_BIT
+ #define CHAR_BIT 8	/* Normally in <limits.h> */
+ #endif
+@@ -257,14 +256,9 @@ again:
+ 				toggle = 0;
+ 				break;
+ 			case 32:
+-				if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
+-					protocol = RC_TYPE_RC6_MCE;
+-					toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
+-					scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
+-				} else {
+-					protocol = RC_BIT_RC6_6A_32;
+-					toggle = 0;
+-				}
++				protocol = RC_TYPE_RC6_MCE;
++				toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
++				scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
+ 				break;
+ 			default:
+ 				IR_dprintk(1, "RC6(6A) unsupported length\n");

packages/linux/patches/4.1-rc8/linux-057-add_SMK_Manufacturing_Inc_Infrared_Receiver.patch

@@ -0,0 +1,13 @@
+diff -Naur linux-3.9.4/drivers/media/rc/mceusb.c linux-3.9.4.patch/drivers/media/rc/mceusb.c
+--- linux-3.9.4/drivers/media/rc/mceusb.c	2013-05-24 20:45:59.000000000 +0200
++++ linux-3.9.4.patch/drivers/media/rc/mceusb.c	2013-05-27 12:28:12.811230633 +0200
+@@ -309,6 +309,9 @@
+ 	/* SMK/I-O Data GV-MC7/RCKIT Receiver */
+ 	{ USB_DEVICE(VENDOR_SMK, 0x0353),
+ 	  .driver_info = MCE_GEN2_NO_TX },
++	/* SMK Manufacturing, Inc. Receiver */
++	{ USB_DEVICE(VENDOR_SMK, 0x0357),
++         .driver_info = MCE_GEN2_NO_TX },
+ 	/* Tatung eHome Infrared Transceiver */
+ 	{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+ 	/* Shuttle eHome Infrared Transceiver */

packages/linux/patches/4.1-rc8/linux-058.05-hid_sony-add_autorepeat_for_PS3_remotes.patch

@@ -0,0 +1,64 @@
+From 7051422474e4c4e302ede3d07ffd8ef2682e07a2 Mon Sep 17 00:00:00 2001
+From: Stefan Saraev <stefan@saraev.ca>
+Date: Tue, 22 Apr 2014 16:05:14 +0300
+Subject: [PATCH] [RFC] hid/sony: add autorepeat for PS3 remotes
+
+adapted to 3.17
+
+Betreff: [RFC] hid/sony: add autorepeat for PS3 remotes
+Von: David Dillow <dave@thedillows.org>
+Datum: 28.06.2013 04:28
+An: linux-input@vger.kernel.org
+Kopie (CC): Stephan Raue <stephan@openelec.tv>
+
+Some applications using the PS3 remote would like to have autorepeat
+from the device. Use the input subsystem's software emulation to provide
+this capability, and enable those that don't need it to turn it off.
+---
+I'm not sure this is the correct approach, or if it is even appropriate
+for a remote to do autorepeat. However, the media/rc subsystem does do
+it by default, and it's been requested by users, so there is at least
+some demand.
+
+This compiled against the hid-sony driver with the PS3 remote changes
+merged, but I have done no testing of it. If the approach seems
+reasonable, I'll try to test it when the MythTV is idle.
+---
+diff -Naur linux-3.17.1/drivers/hid/hid-sony.c linux-3.17.1.patch/drivers/hid/hid-sony.c
+--- linux-3.17.1/drivers/hid/hid-sony.c	2014-10-15 12:29:30.000000000 +0200
++++ linux-3.17.1.patch/drivers/hid/hid-sony.c	2014-10-16 12:55:43.979181366 +0200
+@@ -875,6 +875,25 @@
+ 	return 1;
+ }
+ 
++static int ps3remote_setup_repeat(struct hid_device *hdev)
++{
++	struct hid_input *hidinput = list_first_entry(&hdev->inputs,
++						 struct hid_input, list);
++	struct input_dev *input = hidinput->input;
++
++	/*
++	 * Set up autorepeat defaults per the remote control subsystem;
++	 * this must be done after hid_hw_start(), as having these non-zero
++	 * at the time of input_register_device() tells the input system that
++	 * the hardware does the autorepeat, and the PS3 remote does not.
++	*/
++	set_bit(EV_REP, input->evbit);
++	input->rep[REP_DELAY]  = 500;
++	input->rep[REP_PERIOD] = 125;
++
++	return 0;
++}
++
+ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ 		unsigned int *rsize)
+ {
+@@ -1932,6 +1951,8 @@
+ 			goto err_stop;
+ 
+ 		sony_init_work(sc, dualshock4_state_worker);
++	} else if (sc->quirks & PS3REMOTE) {
++		ret = ps3remote_setup_repeat(hdev);
+ 	} else {
+ 		ret = 0;
+ 	}

packages/linux/patches/4.1-rc8/linux-062-imon_pad_ignore_diagonal.patch

@@ -0,0 +1,21 @@
+diff -Naur linux-3.16.1/drivers/media/rc/imon.c linux-3.16.1.patch/drivers/media/rc/imon.c
+--- linux-3.16.1/drivers/media/rc/imon.c	2014-08-14 04:36:35.000000000 +0200
++++ linux-3.16.1.patch/drivers/media/rc/imon.c	2014-08-15 13:57:16.587620642 +0200
+@@ -1344,6 +1344,17 @@
+ 			}
+ 		} else {
+ 			/*
++			 * For users without stabilized, just ignore any value getting
++			 * to close to the diagonal.
++			 */
++			if ((abs(rel_y) < 2 && abs(rel_x) < 2) ||
++				abs(abs(rel_y) - abs(rel_x)) < 2 ) {
++				spin_lock_irqsave(&ictx->kc_lock, flags);
++				ictx->kc = KEY_UNKNOWN;
++				spin_unlock_irqrestore(&ictx->kc_lock, flags);
++				return;
++			}
++			/*
+ 			 * Hack alert: instead of using keycodes, we have
+ 			 * to use hard-coded scancodes here...
+ 			 */

packages/linux/patches/4.1-rc8/linux-203-stb0899_enable_low_symbol_rate.patch

@@ -0,0 +1,12 @@
+diff -Naur linux-3.7.2/drivers/media/dvb-frontends/stb0899_drv.c linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_drv.c
+--- linux-3.7.2/drivers/media/dvb-frontends/stb0899_drv.c	2013-01-11 18:19:28.000000000 +0100
++++ linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_drv.c	2013-01-16 10:25:43.479645317 +0100
+@@ -1581,7 +1581,7 @@
+ 		.frequency_max 		= 2150000,
+ 		.frequency_stepsize	= 0,
+ 		.frequency_tolerance	= 0,
+-		.symbol_rate_min 	=  5000000,
++		.symbol_rate_min 	=  1000000,
+ 		.symbol_rate_max 	= 45000000,
+ 
+ 		.caps 			= FE_CAN_INVERSION_AUTO	|

packages/linux/patches/4.1-rc8/linux-212-mantis_stb0899_faster_lock.patch

@@ -0,0 +1,138 @@
+diff -Naur linux-3.7.2/drivers/media/dvb-frontends/stb0899_algo.c linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_algo.c
+--- linux-3.7.2/drivers/media/dvb-frontends/stb0899_algo.c	2013-01-11 18:19:28.000000000 +0100
++++ linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_algo.c	2013-01-16 10:28:33.633409961 +0100
+@@ -206,7 +206,6 @@
+ static enum stb0899_status stb0899_search_tmg(struct stb0899_state *state)
+ {
+ 	struct stb0899_internal *internal = &state->internal;
+-	struct stb0899_params *params = &state->params;
+ 
+ 	short int derot_step, derot_freq = 0, derot_limit, next_loop = 3;
+ 	int index = 0;
+@@ -216,10 +215,9 @@
+ 
+ 	/* timing loop computation & symbol rate optimisation	*/
+ 	derot_limit = (internal->sub_range / 2L) / internal->mclk;
+-	derot_step = (params->srate / 2L) / internal->mclk;
++	derot_step = internal->derot_step * 4;				/* dertot_step = decreasing delta */
+ 
+ 	while ((stb0899_check_tmg(state) != TIMINGOK) && next_loop) {
+-		index++;
+ 		derot_freq += index * internal->direction * derot_step;	/* next derot zig zag position	*/
+ 
+ 		if (abs(derot_freq) > derot_limit)
+@@ -230,6 +228,7 @@
+ 			STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq));
+ 			stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency		*/
+ 		}
++		index++;
+ 		internal->direction = -internal->direction;	/* Change zigzag direction		*/
+ 	}
+ 
+@@ -278,14 +277,18 @@
+ {
+ 	struct stb0899_internal *internal = &state->internal;
+ 
+-	short int derot_freq = 0, last_derot_freq = 0, derot_limit, next_loop = 3;
++	short int derot_freq = 0, last_derot_freq = 0, derot_limit, derot_step, next_loop = 3;
+ 	int index = 0;
++	int base_freq;
+ 	u8 cfr[2];
+ 	u8 reg;
+ 
+ 	internal->status = NOCARRIER;
+ 	derot_limit = (internal->sub_range / 2L) / internal->mclk;
+ 	derot_freq = internal->derot_freq;
++	derot_step = internal->derot_step * 2;
++	last_derot_freq = internal->derot_freq;
++	base_freq = internal->derot_freq;
+ 
+ 	reg = stb0899_read_reg(state, STB0899_CFD);
+ 	STB0899_SETFIELD_VAL(CFD_ON, reg, 1);
+@@ -294,11 +297,10 @@
+ 	do {
+ 		dprintk(state->verbose, FE_DEBUG, 1, "Derot Freq=%d, mclk=%d", derot_freq, internal->mclk);
+ 		if (stb0899_check_carrier(state) == NOCARRIER) {
+-			index++;
+ 			last_derot_freq = derot_freq;
+-			derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
++			derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position	*/
+ 
+-			if(abs(derot_freq) > derot_limit)
++			if (derot_freq > base_freq + derot_limit || derot_freq < base_freq - derot_limit)
+ 				next_loop--;
+ 
+ 			if (next_loop) {
+@@ -310,9 +312,10 @@
+ 				STB0899_SETFIELD_VAL(CFRL, cfr[1], LSB(state->config->inversion * derot_freq));
+ 				stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency	*/
+ 			}
++			index++;
++			internal->direction = -internal->direction; /* Change zigzag direction */
+ 		}
+ 
+-		internal->direction = -internal->direction; /* Change zigzag direction */
+ 	} while ((internal->status != CARRIEROK) && next_loop);
+ 
+ 	if (internal->status == CARRIEROK) {
+@@ -338,6 +341,7 @@
+ 	int lock = 0, index = 0, dataTime = 500, loop;
+ 	u8 reg;
+ 
++	msleep(1);
+ 	internal->status = NODATA;
+ 
+ 	/* RESET FEC	*/
+@@ -348,6 +352,7 @@
+ 	reg = stb0899_read_reg(state, STB0899_TSTRES);
+ 	STB0899_SETFIELD_VAL(FRESACS, reg, 0);
+ 	stb0899_write_reg(state, STB0899_TSTRES, reg);
++	msleep(1);
+ 
+ 	if (params->srate <= 2000000)
+ 		dataTime = 2000;
+@@ -363,6 +368,7 @@
+ 
+ 	stb0899_write_reg(state, STB0899_DSTATUS2, 0x00); /* force search loop	*/
+ 	while (1) {
++		msleep(1); 		// Alex: added 1 mSec
+ 		/* WARNING! VIT LOCKED has to be tested before VIT_END_LOOOP	*/
+ 		reg = stb0899_read_reg(state, STB0899_VSTATUS);
+ 		lock = STB0899_GETFIELD(VSTATUS_LOCKEDVIT, reg);
+@@ -390,20 +396,21 @@
+ 	short int derot_freq, derot_step, derot_limit, next_loop = 3;
+ 	u8 cfr[2];
+ 	u8 reg;
+-	int index = 1;
++	int index = 0;
++	int base_freq;
+ 
+ 	struct stb0899_internal *internal = &state->internal;
+-	struct stb0899_params *params = &state->params;
+ 
+-	derot_step = (params->srate / 4L) / internal->mclk;
++	derot_step = internal->derot_step;
+ 	derot_limit = (internal->sub_range / 2L) / internal->mclk;
+ 	derot_freq = internal->derot_freq;
++	base_freq = internal->derot_freq;
+ 
+ 	do {
+ 		if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
+ 
+ 			derot_freq += index * internal->direction * derot_step;	/* next zig zag derotator position */
+-			if (abs(derot_freq) > derot_limit)
++			if (derot_freq > base_freq + derot_limit || derot_freq < base_freq - derot_limit)
+ 				next_loop--;
+ 
+ 			if (next_loop) {
+@@ -417,9 +424,9 @@
+ 				stb0899_write_regs(state, STB0899_CFRM, cfr, 2); /* derotator frequency	*/
+ 
+ 				stb0899_check_carrier(state);
+-				index++;
+ 			}
+ 		}
++		index++;
+ 		internal->direction = -internal->direction; /* change zig zag direction */
+ 	} while ((internal->status != DATAOK) && next_loop);
+ 

packages/linux/patches/4.1-rc8/linux-222-stb0899_signal_quality.patch

@@ -0,0 +1,62 @@
+diff -Naur linux-3.7.2/drivers/media/dvb-frontends/stb0899_drv.c linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_drv.c
+--- linux-3.7.2/drivers/media/dvb-frontends/stb0899_drv.c	2013-01-11 18:19:28.000000000 +0100
++++ linux-3.7.2.patch/drivers/media/dvb-frontends/stb0899_drv.c	2013-01-16 10:33:10.323380937 +0100
+@@ -971,6 +971,16 @@
+ 
+ 				*strength = stb0899_table_lookup(stb0899_dvbsrf_tab, ARRAY_SIZE(stb0899_dvbsrf_tab) - 1, val);
+ 				*strength += 750;
++
++		            	const int MIN_STRENGTH_DVBS = 0;
++		            	const int MAX_STRENGTH_DVBS = 680;
++		            	if (*strength < MIN_STRENGTH_DVBS) 	
++		                	*strength = 0;
++		            	else if(*strength > MAX_STRENGTH_DVBS) 
++		                	*strength = 0xFFFF;
++		            	else
++				    	*strength = (*strength - MIN_STRENGTH_DVBS) * 0xFFFF / (MAX_STRENGTH_DVBS - MIN_STRENGTH_DVBS); 
++
+ 				dprintk(state->verbose, FE_DEBUG, 1, "AGCIQVALUE = 0x%02x, C = %d * 0.1 dBm",
+ 					val & 0xff, *strength);
+ 			}
+@@ -983,6 +993,7 @@
+ 
+ 			*strength = stb0899_table_lookup(stb0899_dvbs2rf_tab, ARRAY_SIZE(stb0899_dvbs2rf_tab) - 1, val);
+ 			*strength += 950;
++			*strength = *strength << 4;
+ 			dprintk(state->verbose, FE_DEBUG, 1, "IF_AGC_GAIN = 0x%04x, C = %d * 0.1 dBm",
+ 				val & 0x3fff, *strength);
+ 		}
+@@ -1016,6 +1027,16 @@
+ 				val = MAKEWORD16(buf[0], buf[1]);
+ 
+ 				*snr = stb0899_table_lookup(stb0899_cn_tab, ARRAY_SIZE(stb0899_cn_tab) - 1, val);
++
++		            	const int MIN_SNR_DVBS = 0;
++		            	const int MAX_SNR_DVBS = 200;
++		            	if (*snr < MIN_SNR_DVBS) 	
++		                	*snr = 0;
++		            	else if(*snr > MAX_SNR_DVBS) 
++		                	*snr = 0xFFFF;
++		            	else
++				    	*snr = (*snr - MIN_SNR_DVBS) * 0xFFFF / (MAX_SNR_DVBS - MIN_SNR_DVBS);
++
+ 				dprintk(state->verbose, FE_DEBUG, 1, "NIR = 0x%02x%02x = %u, C/N = %d * 0.1 dBm\n",
+ 					buf[0], buf[1], val, *snr);
+ 			}
+@@ -1040,6 +1061,16 @@
+ 				val = (quantn - estn) / 10;
+ 			}
+ 			*snr = val;
++
++	        	const int MIN_SNR_DVBS2 = 10;
++	        	const int MAX_SNR_DVBS2 = 70;
++	        	if (*snr < MIN_SNR_DVBS2) 	
++		            	*snr = 0;
++	        	else if(*snr > MAX_SNR_DVBS2) 
++        		    	*snr = 0xFFFF;
++        		else
++				*snr = (*snr - MIN_SNR_DVBS2) * 0xFFFF / (MAX_SNR_DVBS2 - MIN_SNR_DVBS2); 
++
+ 			dprintk(state->verbose, FE_DEBUG, 1, "Es/N0 quant = %d (%d) estimate = %u (%d), C/N = %d * 0.1 dBm",
+ 				quant, quantn, est, estn, val);
+ 		}

packages/linux/patches/4.1-rc8/linux-223-Fix-video-artifacts-with-tt-3600-s2-usb.patch

@@ -0,0 +1,17 @@
+diff -Naur linux-3.7.9/drivers/media/usb/dvb-usb/pctv452e.c linux-3.7.9.patch/drivers/media/usb/dvb-usb/pctv452e.c
+--- linux-3.7.9/drivers/media/usb/dvb-usb/pctv452e.c    2013-01-11 18:19:28.000000000 +0100
++++ linux-3.7.9.patch/drivers/media/usb/dvb-usb/pctv452e.c      2013-01-16 10:35:01.131342123 +0100
+@@ -995,11 +995,11 @@
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+-				.count = 7,
++				.count = 4,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+-						.framesperurb = 4,
++						.framesperurb = 64,
+						.framesize = 940,
+						.interval = 1
+					}

packages/linux/patches/4.1-rc8/linux-224-STK1160-addFramescaling.patch

@@ -0,0 +1,284 @@
+From edf8977b62ae86859cccf3d0ea4883333ea4d138 Mon Sep 17 00:00:00 2001
+From: Dale Hamel <dale.hamel@srvthe.net>
+Date: Tue, 24 Feb 2015 10:31:04 -0500
+Subject: [PATCH] Add framescaling support to stk1160
+
+Implements frame scaling support for stk1160 to support format changes instead of a static frame size.
+
+This is effectively a dumb sampling, and could perhaps benefit from being an averaging instead.
+
+This was a requested "TO DO" for this driver, and allows support for userspace programs like Hyperion and Boblight.
+
+Submitted on behalf of the original author, Michael Stegemann <endarno@gmail.com>
+---
+ drivers/media/usb/stk1160/stk1160-core.c  |   1 +
+ drivers/media/usb/stk1160/stk1160-reg.h   |  26 +++++++
+ drivers/media/usb/stk1160/stk1160-v4l.c   | 112 +++++++++++++++++++++++-------
+ drivers/media/usb/stk1160/stk1160-video.c |  17 ++++-
+ drivers/media/usb/stk1160/stk1160.h       |   1 +
+ 5 files changed, 130 insertions(+), 27 deletions(-)
+
+diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c
+index 03504dc..1881770 100644
+--- a/drivers/media/usb/stk1160/stk1160-core.c
++++ b/drivers/media/usb/stk1160/stk1160-core.c
+@@ -418,6 +418,7 @@ static void stk1160_disconnect(struct usb_interface *interface)
+ 	stk1160_ac97_unregister(dev);
+ 
+ 	stk1160_clear_queue(dev);
++	vb2_queue_release(&dev->vb_vidq);
+ 
+ 	video_unregister_device(&dev->vdev);
+ 	v4l2_device_disconnect(&dev->v4l2_dev);
+diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h
+index 3e49da6..b1fa11d 100644
+--- a/drivers/media/usb/stk1160/stk1160-reg.h
++++ b/drivers/media/usb/stk1160/stk1160-reg.h
+@@ -33,6 +33,32 @@
+  */
+ #define STK1160_DCTRL			0x100
+ 
++/*
++ * Decimation Control Register:
++ * Byte 104:
++ * Horizontal Decimation Line Unit Count
++ * Byte 105:
++ * Vertical   Decimation Line Unit Count
++ * Byte 106:
++ * Bit 0 - Horizontal Decimation Control
++ *	 0 Horizontal decimation is disabled.
++ *	 1 Horizontal decimation is enabled.
++ * Bit 1 - Decimates Half or More Column
++ *   0 Decimates less than half from original column,
++ *     -> send count unit (0x105) before each unit skipped.
++ *   1 Decimates half or more from original column,
++ *     -> skip count unit (0x105) before each unit sent.
++ * Bit 2 - Vertical Decimation Control
++ *	 see Bit 0, only vertical
++ * Bit 3 - Vertical Greater or Equal to Half
++ *	 see Bit 1, only vertical
++ * Bit 4 - Decimation Unit
++ *	0 Decimation will work with 2 rows or columns per unit.
++ *	1 Decimation will work with 4 rows or columns per unit.
++ */
++#define STK1160_DMCTRL			0x104
++
++
+ /* Capture Frame Start Position */
+ #define STK116_CFSPO			0x110
+ #define STK116_CFSPO_STX_L		0x110
+diff --git a/drivers/media/usb/stk1160/stk1160-v4l.c b/drivers/media/usb/stk1160/stk1160-v4l.c
+index 65a326c..94dafeb 100644
+--- a/drivers/media/usb/stk1160/stk1160-v4l.c
++++ b/drivers/media/usb/stk1160/stk1160-v4l.c
+@@ -106,6 +106,76 @@ static void stk1160_set_std(struct stk1160 *dev)
+ 
+ }
+ 
++static void stk1160_try_fmt(struct stk1160 *dev, struct v4l2_format *f, bool try)
++{
++	int base_width, base_height;
++
++	if (dev->norm & V4L2_STD_525_60){
++		base_width = 720;
++		base_height = 480;
++	} else {
++		base_width = 720;
++		base_height = 576;
++	}
++
++	if (f->fmt.pix.width <= (base_width / 3)
++	    || f->fmt.pix.height <= (base_height / 3)){
++		f->fmt.pix.width = base_width / 3;
++		f->fmt.pix.height = base_height / 3;
++		if (!try){
++			dev->decimate = 3;
++		}
++	} else if ((f->fmt.pix.width >= base_width >> 1
++			 && f->fmt.pix.width < base_width)
++			 ||((f->fmt.pix.height >= base_height >> 1
++			 && f->fmt.pix.height < base_height))){
++		f->fmt.pix.width = base_width >> 1;
++		f->fmt.pix.height = base_height >> 1;
++		if (!try){
++			dev->decimate = 2;
++		}
++	} else {
++		f->fmt.pix.width = base_width;
++		f->fmt.pix.height = base_height;
++		if (!try){
++			dev->decimate = 0;
++		}
++	}
++}
++
++static void stk1160_set_fmt(struct stk1160 *dev)
++{
++	if (dev->norm & V4L2_STD_525_60){
++		dev->width = 720;
++		dev->height = 480;
++	} else {
++		dev->width = 720;
++		dev->height = 576;
++	}
++
++	switch (dev->decimate){
++		case 0:
++			stk1160_write_reg(dev, STK1160_DMCTRL,   0x00);
++			stk1160_write_reg(dev, STK1160_DMCTRL+1, 0x00);
++			stk1160_write_reg(dev, STK1160_DMCTRL+2, 0x00);
++			break;
++		case 2:
++			stk1160_write_reg(dev, STK1160_DMCTRL,   0x01);
++			stk1160_write_reg(dev, STK1160_DMCTRL+1, 0x01);
++			stk1160_write_reg(dev, STK1160_DMCTRL+2, 0x1f);
++			dev->width = dev->width >> 1;
++			dev->height = dev->height >> 1;
++			break;
++		case 3:
++			stk1160_write_reg(dev, STK1160_DMCTRL,   0x02);
++			stk1160_write_reg(dev, STK1160_DMCTRL+1, 0x02);
++			stk1160_write_reg(dev, STK1160_DMCTRL+2, 0x1f);
++			dev->width = dev->width / 3;
++			dev->height = dev->height / 3;
++			break;
++	}
++}
++
+ /*
+  * Set a new alternate setting.
+  * Returns true is dev->max_pkt_size has changed, false otherwise.
+@@ -321,17 +391,10 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+ {
+ 	struct stk1160 *dev = video_drvdata(file);
+ 
+-	/*
+-	 * User can't choose size at his own will,
+-	 * so we just return him the current size chosen
+-	 * at standard selection.
+-	 * TODO: Implement frame scaling?
+-	 */
++	stk1160_try_fmt(dev, f, true);
+ 
+-	f->fmt.pix.pixelformat = dev->fmt->fourcc;
+-	f->fmt.pix.width = dev->width;
+-	f->fmt.pix.height = dev->height;
+ 	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
++	f->fmt.pix.pixelformat = dev->fmt->fourcc;
+ 	f->fmt.pix.bytesperline = dev->width * 2;
+ 	f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline;
+ 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+@@ -348,9 +411,14 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+ 	if (vb2_is_busy(q))
+ 		return -EBUSY;
+ 
+-	vidioc_try_fmt_vid_cap(file, priv, f);
++	stk1160_try_fmt(dev, f, false);
++	stk1160_set_fmt(dev);
+ 
+-	/* We don't support any format changes */
++	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
++	f->fmt.pix.pixelformat = dev->fmt->fourcc;
++	f->fmt.pix.bytesperline = dev->width * 2;
++	f->fmt.pix.sizeimage = dev->height * f->fmt.pix.bytesperline;
++	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+ 
+ 	return 0;
+ }
+@@ -389,23 +457,18 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
+ 	dev->norm = norm;
+ 
+ 	/* This is taken from saa7115 video decoder */
+-	if (dev->norm & V4L2_STD_525_60) {
+-		dev->width = 720;
+-		dev->height = 480;
+-	} else if (dev->norm & V4L2_STD_625_50) {
+-		dev->width = 720;
+-		dev->height = 576;
++	if (dev->norm & V4L2_STD_525_60 || dev->norm & V4L2_STD_625_50) {
++		stk1160_set_std(dev);
++		stk1160_set_fmt(dev);
++
++		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std,
++				dev->norm);
++
++		return 0;
+ 	} else {
+ 		stk1160_err("invalid standard\n");
+ 		return -EINVAL;
+ 	}
+-
+-	stk1160_set_std(dev);
+-
+-	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std,
+-			dev->norm);
+-
+-	return 0;
+ }
+ 
+ 
+@@ -671,6 +734,7 @@ int stk1160_video_register(struct stk1160 *dev)
+ 	dev->norm = V4L2_STD_NTSC_M;
+ 	dev->width = 720;
+ 	dev->height = 480;
++	dev->decimate = 0;
+ 
+ 	/* set default format */
+ 	dev->fmt = &format[0];
+diff --git a/drivers/media/usb/stk1160/stk1160-video.c b/drivers/media/usb/stk1160/stk1160-video.c
+index 39f1aae..5a55028 100644
+--- a/drivers/media/usb/stk1160/stk1160-video.c
++++ b/drivers/media/usb/stk1160/stk1160-video.c
+@@ -84,7 +84,6 @@ struct stk1160_buffer *stk1160_next_buffer(struct stk1160 *dev)
+ 	if (!list_empty(&dev->avail_bufs)) {
+ 		buf = list_first_entry(&dev->avail_bufs,
+ 				struct stk1160_buffer, list);
+-		list_del(&buf->list);
+ 	}
+ 	spin_unlock_irqrestore(&dev->buf_lock, flags);
+ 
+@@ -95,7 +94,7 @@ static inline
+ void stk1160_buffer_done(struct stk1160 *dev)
+ {
+ 	struct stk1160_buffer *buf = dev->isoc_ctl.buf;
+-
++	unsigned long flags = 0;
+ 	dev->field_count++;
+ 
+ 	buf->vb.v4l2_buf.sequence = dev->field_count >> 1;
+@@ -104,7 +103,19 @@ void stk1160_buffer_done(struct stk1160 *dev)
+ 	v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
+ 
+ 	vb2_set_plane_payload(&buf->vb, 0, buf->bytesused);
+-	vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
++
++	spin_lock_irqsave(&dev->buf_lock, flags);
++	if (buf->bytesused == vb2_plane_size(&buf->vb, 0))
++		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
++	else
++		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
++
++	if (!list_empty(&dev->avail_bufs)) {
++		list_del(&buf->list);
++	}
++
++	spin_unlock_irqrestore(&dev->buf_lock, flags);
++
+ 
+ 	dev->isoc_ctl.buf = NULL;
+ }
+diff --git a/drivers/media/usb/stk1160/stk1160.h b/drivers/media/usb/stk1160/stk1160.h
+index abdea48..895ed35 100644
+--- a/drivers/media/usb/stk1160/stk1160.h
++++ b/drivers/media/usb/stk1160/stk1160.h
+@@ -150,6 +150,7 @@ struct stk1160 {
+ 	unsigned int ctl_input;	  /* selected input */
+ 	v4l2_std_id norm;	  /* current norm */
+ 	struct stk1160_fmt *fmt;  /* selected format */
++	int decimate;
+ 
+ 	unsigned int field_count; /* not sure ??? */
+ 	enum v4l2_field field;    /* also not sure :/ */
+-- 
+2.1.1
+

packages/linux/patches/4.1-rc8/linux-227-ds3000-invalid-symbol-rate.patch

@@ -0,0 +1,18 @@
+diff -rupN a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c
+--- a/drivers/media/dvb-frontends/ds3000.c	2015-01-28 23:24:59.000000000 +0100
++++ b/drivers/media/dvb-frontends/ds3000.c	2015-01-29 21:57:56.000000000 +0100
+@@ -958,6 +958,14 @@ static int ds3000_set_frontend(struct dv
+ 	/* enable ac coupling */
+ 	ds3000_writereg(state, 0x25, 0x8a);
+ 
++	dprintk("%s() frequency:%u symbol_rate:%u\n", __func__, c->frequency, c->symbol_rate);
++
++	if (c->symbol_rate < ds3000_ops.info.symbol_rate_min || c->symbol_rate > ds3000_ops.info.symbol_rate_max ) {
++		dprintk("%s() symbol_rate %u out of range (%u ... %u)\n", __func__, c->symbol_rate, 
++			ds3000_ops.info.symbol_rate_min, ds3000_ops.info.symbol_rate_max);
++		return 1;
++	}
++
+ 	/* enhance symbol rate performance */
+ 	if ((c->symbol_rate / 1000) <= 5000) {
+ 		value = 29777 / (c->symbol_rate / 1000) + 1;

packages/linux/patches/4.1-rc8/linux-706-Sitecom-N300.patch

@@ -0,0 +1,11 @@
+diff -Naur linux-3.10.16/drivers/staging/rtl8712/usb_intf.c linux-3.10.16.patch/drivers/staging/rtl8712/usb_intf.c
+--- linux-3.10.16/drivers/staging/rtl8712/usb_intf.c	2013-10-14 01:08:56.000000000 +0200
++++ linux-3.10.16.patch/drivers/staging/rtl8712/usb_intf.c	2013-10-16 13:27:44.032951265 +0200
+@@ -92,6 +92,7 @@
+ 	{USB_DEVICE(0x0DF6, 0x005B)},
+ 	{USB_DEVICE(0x0DF6, 0x005D)},
+ 	{USB_DEVICE(0x0DF6, 0x0063)},
++	{USB_DEVICE(0x0DF6, 0x006C)},
+ 	/* Sweex */
+ 	{USB_DEVICE(0x177F, 0x0154)},
+ 	/* Thinkware */

packages/linux/patches/4.1-rc8/linux-990.06-hda-Avoid-outputting-HDMI-audio-before-prepare-.patch

@@ -0,0 +1,83 @@
+From 56ca3555ed8e0f5fd741477fd23497f5455c3f53 Mon Sep 17 00:00:00 2001
+From: Stefan Saraev <stefan@saraev.ca>
+Date: Tue, 22 Apr 2014 15:58:50 +0300
+Subject: [PATCH] ALSA: hda - Avoid outputting HDMI audio before prepare() and after close()
+
+adapted to 3.15
+
+From a6024295fd3290a8c9c5519a03316081ee82378a Mon Sep 17 00:00:00 2001
+From: Anssi Hannula <anssi.hannula@iki.fi>
+Date: Sat, 16 Feb 2013 17:42:46 +0200
+Subject: [PATCH] ALSA: hda - Avoid outputting HDMI audio before prepare() and
+ after close()
+
+Some HDMI codecs (at least NVIDIA 0x10de000b:0x10de0101:0x100100) start
+transmitting an empty audio stream as soon as PIN_OUT and AC_DIG1_ENABLE
+are enabled.
+
+Since commit 6169b673618bf0b2518ce413b54925782a603f06 ("ALSA: hda -
+Always turn on pins for HDMI/DP") this happens at first open() time, and
+will continue even after close().
+
+Additionally, some codecs (at least Intel PantherPoint HDMI) currently
+continue transmitting HDMI audio even after close() in case some actual
+audio was output after open() (this happens regardless of PIN_OUT).
+
+Empty HDMI audio transmission when not intended has the effect that a
+possible HDMI audio sink/receiver may prefer the empty HDMI audio stream
+over an actual audio stream on its S/PDIF inputs.
+
+To avoid the issue before first prepare(), set stream format to 0 on
+codec initialization. 0 is not a valid format value for HDMI and will
+prevent the audio stream from being output.
+
+Additionally, at close() time, make sure that the stream is cleaned up.
+This will ensure that the format is reset to 0 at that time, preventing
+audio from being output in that case.
+
+Thanks to OpenELEC developers and users for their help in investigating
+this issue on the affected NVIDIA "ION2" hardware. Testing of the final
+version on NVIDIA ION2 was done by OpenELEC user "MrXIII". Testing on
+Intel PantherPoint was done by myself.
+
+Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
+Cc: stable@vger.kernel.org
+---
+ sound/pci/hda/patch_hdmi.c |   14 ++++++++++++++
+ 1 files changed, 14 insertions(+), 0 deletions(-)
+
+diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
+index 0cb5b89..e92f24f 100644
+--- a/sound/pci/hda/patch_hdmi.c
++++ b/sound/pci/hda/patch_hdmi.c
+@@ -1698,6 +1698,14 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
+ 	if (err < 0)
+ 		return err;
+ 
++	/*
++	 * Some HDMI codecs (at least NVIDIA 0x10de000b:0x10de0101:0x100100)
++	 * start transmitting an empty audio stream as soon as PIN_OUT and
++	 * AC_DIG1_ENABLE are enabled, which happens at open() time.
++	 * To avoid that, set format to 0, which is not valid for HDMI.
++	*/
++	snd_hda_codec_write(codec, cvt_nid, 0, AC_VERB_SET_STREAM_FORMAT, 0);
++
+ 	if (spec->num_cvts < ARRAY_SIZE(spec->cvt_nids))
+ 		spec->cvt_nids[spec->num_cvts] = cvt_nid;
+ 	spec->num_cvts++;
+@@ -1823,6 +1831,12 @@ static int hdmi_pcm_close(struct hda_pcm_stream *hinfo,
+ 	int pinctl;
+ 
+ 	if (hinfo->nid) {
++		/*
++		 * Make sure no empty audio is output after this point by
++		 * setting stream format to 0, which is not valid for HDMI.
++		*/
++		__snd_hda_codec_cleanup_stream(codec, hinfo->nid, 1);
++
+ 		cvt_idx = cvt_nid_to_cvt_index(codec, hinfo->nid);
+ 		if (snd_BUG_ON(cvt_idx < 0))
+ 			return -EINVAL;
+-- 
+1.7.2.5
+

packages/linux/patches/4.1-rc8/linux-999-i915-use-legacy-turbo.patch

@@ -0,0 +1,30 @@
+From 5a59cc60d323c3b50f3afa4b9949f97f2bd05ed0 Mon Sep 17 00:00:00 2001
+From: fritsch <Peter.Fruehberger@gmail.com>
+Date: Thu, 11 Jun 2015 11:02:01 +0300
+Subject: [PATCH] i915_irq: enable legacy turbo
+
+---
+ drivers/gpu/drm/i915/i915_irq.c | 7 +------
+ 1 file changed, 1 insertion(+), 6 deletions(-)
+
+diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
+index 6d49443..2367009 100644
+--- a/drivers/gpu/drm/i915/i915_irq.c
++++ b/drivers/gpu/drm/i915/i915_irq.c
+@@ -4235,12 +4235,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
+ 	INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
+ 	INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
+ 
+-	/* Let's track the enabled rps events */
+-	if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
+-		/* WaGsvRC0ResidencyMethod:vlv */
+-		dev_priv->pm_rps_events = GEN6_PM_RP_DOWN_EI_EXPIRED | GEN6_PM_RP_UP_EI_EXPIRED;
+-	else
+-		dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
++	dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
+ 
+ 	INIT_DELAYED_WORK(&dev_priv->gpu_error.hangcheck_work,
+ 			  i915_hangcheck_elapsed);
+-- 
+2.1.4
+

packages/linux/patches/4.1-rc8/linux-999.02-0001-pm-disable-async-suspend-resume-by-default.patch

@@ -0,0 +1,25 @@
+From c314d9af9d774c052bea324e1a140ccdba0ca070 Mon Sep 17 00:00:00 2001
+From: Stefan Saraev <stefan@saraev.ca>
+Date: Tue, 8 Apr 2014 14:02:53 +0300
+Subject: [PATCH] pm: disable async suspend/resume by default
+
+---
+ kernel/power/main.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/kernel/power/main.c b/kernel/power/main.c
+index 1d1bf63..361db93 100644
+--- a/kernel/power/main.c
++++ b/kernel/power/main.c
+@@ -46,7 +46,7 @@ int pm_notifier_call_chain(unsigned long val)
+ }
+ 
+ /* If set, devices may be suspended and resumed asynchronously. */
+-int pm_async_enabled = 1;
++int pm_async_enabled = 0;
+ 
+ static ssize_t pm_async_show(struct kobject *kobj, struct kobj_attribute *attr,
+ 			     char *buf)
+-- 
+1.7.2.5
+

packages/linux/patches/4.1-rc8/linux-999.05-eMMC-Don-t-initialize-partitions-on-RPMB-flagged-are.patch

@@ -0,0 +1,26 @@
+From 57f0b99ca9a2db948fa70988c447553683368be1 Mon Sep 17 00:00:00 2001
+From: Nell Hardcastle <nell@dev-nell.com>
+Date: Thu, 29 May 2014 22:06:50 -0700
+Subject: [PATCH] eMMC: Don't initialize partitions on RPMB flagged areas.
+
+Prevents a lot of pointless hanging at boot on some devices.
+---
+ drivers/mmc/card/block.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
+index 4409d79..56df902 100644
+--- a/drivers/mmc/card/block.c
++++ b/drivers/mmc/card/block.c
+@@ -2254,7 +2254,7 @@ static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
+ 		return 0;
+ 
+ 	for (idx = 0; idx < card->nr_parts; idx++) {
+-		if (card->part[idx].size) {
++		if (card->part[idx].size && !(card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB)) {
+ 			ret = mmc_blk_alloc_part(card, md,
+ 				card->part[idx].part_cfg,
+ 				card->part[idx].size >> 9,
+-- 
+1.7.10.4
+

projects/Generic/linux/linux.x86_64.conf

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86_64 4.0.0-rc6 Kernel Configuration
+# Linux/x86_64 4.1.0-rc8 Kernel Configuration
 #
 CONFIG_64BIT=y
 CONFIG_X86_64=y
@@ -40,6 +40,7 @@ CONFIG_X86_HT=y
 CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
 CONFIG_ARCH_SUPPORTS_UPROBES=y
 CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_EXTABLE_SORT=y
@@ -93,7 +94,6 @@ CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -139,6 +139,7 @@ CONFIG_RCU_NOCB_CPU=y
 # CONFIG_RCU_NOCB_CPU_NONE is not set
 # CONFIG_RCU_NOCB_CPU_ZERO is not set
 CONFIG_RCU_NOCB_CPU_ALL=y
+# CONFIG_RCU_EXPEDITE_BOOT is not set
 CONFIG_BUILD_BIN2C=y
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
@@ -183,6 +184,7 @@ CONFIG_HAVE_PCSPKR_PLATFORM=y
 CONFIG_BPF=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
+CONFIG_MULTIUSER=y
 # CONFIG_SGETMASK_SYSCALL is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_SYSCTL_SYSCALL is not set
@@ -264,9 +266,11 @@ CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
 CONFIG_HAVE_ARCH_SOFT_DIRTY=y
 CONFIG_MODULES_USE_ELF_RELA=y
 CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
 CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_COMPAT_OLD_SIGACTION=y
 
@@ -357,7 +361,6 @@ CONFIG_IOSF_MBI=m
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_HYPERVISOR_GUEST is not set
 CONFIG_NO_BOOTMEM=y
-# CONFIG_MEMTEST is not set
 # CONFIG_MK8 is not set
 # CONFIG_MPSC is not set
 # CONFIG_MCORE2 is not set
@@ -388,7 +391,6 @@ CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
-CONFIG_X86_UP_APIC_MSI=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
@@ -408,7 +410,7 @@ CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
 CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
+CONFIG_X86_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
 # CONFIG_AMD_NUMA is not set
 CONFIG_X86_64_ACPI_NUMA=y
@@ -456,6 +458,7 @@ CONFIG_CLEANCACHE=y
 # CONFIG_ZBUD is not set
 # CONFIG_ZSMALLOC is not set
 CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_X86_PMEM_LEGACY is not set
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
 CONFIG_X86_RESERVE_LOW=64
@@ -516,6 +519,7 @@ CONFIG_PM_CLK=y
 CONFIG_ACPI=y
 CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
 CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
 CONFIG_ACPI_SLEEP=y
 # CONFIG_ACPI_PROCFS_POWER is not set
 # CONFIG_ACPI_EC_DEBUGFS is not set
@@ -639,7 +643,6 @@ CONFIG_AMD_NB=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_BINFMT_SCRIPT=y
 # CONFIG_HAVE_AOUT is not set
@@ -926,7 +929,7 @@ CONFIG_DNS_RESOLVER=y
 # CONFIG_VSOCKETS is not set
 # CONFIG_NETLINK_MMAP is not set
 # CONFIG_NETLINK_DIAG is not set
-# CONFIG_NET_MPLS_GSO is not set
+# CONFIG_MPLS is not set
 # CONFIG_HSR is not set
 # CONFIG_NET_SWITCHDEV is not set
 CONFIG_RPS=y
@@ -956,11 +959,15 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
 CONFIG_BT_LE=y
 # CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
 
 #
 # Bluetooth device drivers
 #
+CONFIG_BT_INTEL=m
+CONFIG_BT_BCM=m
 CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_BCM=y
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -985,6 +992,7 @@ CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_CFG80211_INTERNAL_REGDB=y
 CONFIG_CFG80211_WEXT=y
+CONFIG_CFG80211_WEXT_EXPORT=y
 CONFIG_LIB80211=m
 CONFIG_LIB80211_CRYPT_WEP=m
 CONFIG_LIB80211_CRYPT_CCMP=m
@@ -1073,6 +1081,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_PMEM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -1366,13 +1375,7 @@ CONFIG_TUN=y
 # Distributed Switch Architecture drivers
 #
 # CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
 # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
 CONFIG_ETHERNET=y
 CONFIG_MDIO=y
 CONFIG_NET_VENDOR_3COM=y
@@ -1385,8 +1388,6 @@ CONFIG_VORTEX=y
 CONFIG_NET_VENDOR_AMD=y
 # CONFIG_AMD8111_ETH is not set
 CONFIG_PCNET32=y
-# CONFIG_AMD_XGBE is not set
-# CONFIG_NET_XGENE is not set
 CONFIG_NET_VENDOR_ARC=y
 CONFIG_NET_VENDOR_ATHEROS=y
 CONFIG_ATL2=y
@@ -1394,6 +1395,7 @@ CONFIG_ATL1=y
 CONFIG_ATL1E=y
 CONFIG_ATL1C=y
 CONFIG_ALX=y
+# CONFIG_NET_CADENCE is not set
 CONFIG_NET_VENDOR_BROADCOM=y
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
@@ -1497,7 +1499,6 @@ CONFIG_PHYLIB=y
 #
 CONFIG_AT803X_PHY=y
 CONFIG_AMD_PHY=y
-# CONFIG_AMD_XGBE_PHY is not set
 CONFIG_MARVELL_PHY=y
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
@@ -1610,13 +1611,7 @@ CONFIG_AR5523=m
 CONFIG_WCN36XX=m
 # CONFIG_WCN36XX_DEBUGFS is not set
 # CONFIG_B43 is not set
-# CONFIG_B43_BUSES_BCMA_AND_SSB is not set
-# CONFIG_B43_BUSES_BCMA is not set
-# CONFIG_B43_BUSES_SSB is not set
 # CONFIG_B43LEGACY is not set
-# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
 CONFIG_BRCMUTIL=m
 # CONFIG_BRCMSMAC is not set
 CONFIG_BRCMFMAC=m
@@ -1896,7 +1891,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MFD_HSU is not set
 CONFIG_SERIAL_CORE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_SCCNXP is not set
@@ -2032,6 +2026,7 @@ CONFIG_PINCTRL=y
 #
 # CONFIG_DEBUG_PINCTRL is not set
 # CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -2138,6 +2133,7 @@ CONFIG_SENSORS_IT87=m
 # CONFIG_SENSORS_NCT6683 is not set
 # CONFIG_SENSORS_NCT6775 is not set
 # CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_PMBUS is not set
 # CONFIG_SENSORS_SHT21 is not set
@@ -2225,6 +2221,7 @@ CONFIG_BCMA=m
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_PCI=y
 # CONFIG_BCMA_HOST_SOC is not set
+CONFIG_BCMA_DRIVER_PCI=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
 # CONFIG_BCMA_DEBUG is not set
 
@@ -2245,6 +2242,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_DLN2 is not set
 # CONFIG_MFD_MC13XXX_I2C is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
 # CONFIG_LPC_ICH is not set
 CONFIG_LPC_SCH=y
 # CONFIG_INTEL_SOC_PMIC is not set
@@ -2255,10 +2253,12 @@ CONFIG_LPC_SCH=y
 # CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_MAX14577 is not set
 # CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
 # CONFIG_MFD_MAX8907 is not set
 # CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_MAX8997 is not set
 # CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
 # CONFIG_MFD_MENF21BMC is not set
 # CONFIG_MFD_VIPERBOARD is not set
 # CONFIG_MFD_RETU is not set
@@ -2272,6 +2272,7 @@ CONFIG_MFD_RTSX_USB=y
 # CONFIG_MFD_SEC_CORE is not set
 # CONFIG_MFD_SI476X_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
 # CONFIG_MFD_SMSC is not set
 # CONFIG_ABX500_CORE is not set
 # CONFIG_MFD_SYSCON is not set
@@ -2290,7 +2291,6 @@ CONFIG_MFD_RTSX_USB=y
 # CONFIG_TWL6040_CORE is not set
 # CONFIG_MFD_WL1273_CORE is not set
 # CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_TC3589X is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_VX855 is not set
 # CONFIG_MFD_ARIZONA_I2C is not set
@@ -2643,7 +2643,6 @@ CONFIG_MEDIA_TUNER_FC0013=m
 CONFIG_MEDIA_TUNER_TDA18212=m
 CONFIG_MEDIA_TUNER_E4000=m
 CONFIG_MEDIA_TUNER_FC2580=m
-CONFIG_MEDIA_TUNER_M88TS2022=m
 CONFIG_MEDIA_TUNER_M88RS6000T=m
 CONFIG_MEDIA_TUNER_TUA9001=m
 CONFIG_MEDIA_TUNER_SI2157=m
@@ -2820,6 +2819,7 @@ CONFIG_DRM_TTM=y
 # CONFIG_DRM_TDFX is not set
 # CONFIG_DRM_R128 is not set
 CONFIG_DRM_RADEON=y
+# CONFIG_DRM_RADEON_USERPTR is not set
 # CONFIG_DRM_RADEON_UMS is not set
 # CONFIG_DRM_NOUVEAU is not set
 # CONFIG_DRM_I810 is not set
@@ -2831,6 +2831,7 @@ CONFIG_DRM_I915_FBDEV=y
 # CONFIG_DRM_SIS is not set
 # CONFIG_DRM_VIA is not set
 # CONFIG_DRM_SAVAGE is not set
+# CONFIG_DRM_VGEM is not set
 # CONFIG_DRM_VMWGFX is not set
 # CONFIG_DRM_GMA500 is not set
 # CONFIG_DRM_UDL is not set
@@ -3065,6 +3066,7 @@ CONFIG_SND_HDA_CODEC_CMEDIA=m
 CONFIG_SND_HDA_CODEC_SI3054=m
 CONFIG_SND_HDA_GENERIC=m
 CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_CORE=m
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_UA101=m
@@ -3122,7 +3124,6 @@ CONFIG_DRAGONRISE_FF=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_HOLTEK is not set
 # CONFIG_HID_GT683R is not set
-# CONFIG_HID_HUION is not set
 # CONFIG_HID_KEYTOUCH is not set
 CONFIG_HID_KYE=y
 # CONFIG_HID_UCLOGIC is not set
@@ -3448,6 +3449,7 @@ CONFIG_LEDS_CLASS_FLASH=y
 # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
 #
 # CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_PM8941_WLED is not set
 
 #
 # LED Triggers
@@ -3488,6 +3490,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
@@ -3578,6 +3581,7 @@ CONFIG_RTS5208=y
 # CONFIG_VT6655 is not set
 CONFIG_VT6656=m
 # CONFIG_FB_SM7XX is not set
+# CONFIG_FB_SM750 is not set
 # CONFIG_FB_XGI is not set
 # CONFIG_FT1000 is not set
 
@@ -3715,6 +3719,7 @@ CONFIG_EXT4_FS=y
 CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
 # CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD2=y
 # CONFIG_JBD2_DEBUG is not set
@@ -3742,6 +3747,10 @@ CONFIG_BTRFS_FS=m
 # CONFIG_BTRFS_DEBUG is not set
 # CONFIG_BTRFS_ASSERT is not set
 # CONFIG_NILFS2_FS is not set
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_STAT_FS=y
+# CONFIG_F2FS_FS_XATTR is not set
+CONFIG_F2FS_CHECK_FS=y
 # CONFIG_FS_DAX is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_EXPORTFS=y
@@ -3833,10 +3842,6 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_PSTORE is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-CONFIG_F2FS_FS=y
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_F2FS_FS_XATTR is not set
-CONFIG_F2FS_CHECK_FS=y
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V2=y
@@ -4005,6 +4010,7 @@ CONFIG_PANIC_TIMEOUT=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
 # CONFIG_TIMER_STATS is not set
 
 #
@@ -4032,6 +4038,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 #
 # RCU Debugging
 #
+# CONFIG_PROVE_RCU is not set
 # CONFIG_SPARSE_RCU_POINTER is not set
 # CONFIG_TORTURE_TEST is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -4078,6 +4085,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_BPF is not set
 # CONFIG_TEST_FIRMWARE is not set
 # CONFIG_TEST_UDELAY is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -4269,6 +4277,7 @@ CONFIG_KVM_COMPAT=y
 CONFIG_RAID6_PQ=m
 CONFIG_BITREVERSE=y
 # CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GENERIC_NET_UTILS=y

projects/Nvidia_Legacy/linux/linux.x86_64.conf

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/x86_64 4.0.1 Kernel Configuration
+# Linux/x86_64 4.1.0-rc8 Kernel Configuration
 #
 CONFIG_64BIT=y
 CONFIG_X86_64=y
@@ -40,6 +40,7 @@ CONFIG_X86_HT=y
 CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
 CONFIG_ARCH_SUPPORTS_UPROBES=y
 CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_PGTABLE_LEVELS=4
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_EXTABLE_SORT=y
@@ -93,7 +94,6 @@ CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -139,6 +139,7 @@ CONFIG_RCU_NOCB_CPU=y
 # CONFIG_RCU_NOCB_CPU_NONE is not set
 # CONFIG_RCU_NOCB_CPU_ZERO is not set
 CONFIG_RCU_NOCB_CPU_ALL=y
+# CONFIG_RCU_EXPEDITE_BOOT is not set
 CONFIG_BUILD_BIN2C=y
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
@@ -183,6 +184,7 @@ CONFIG_HAVE_PCSPKR_PLATFORM=y
 CONFIG_BPF=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
+CONFIG_MULTIUSER=y
 # CONFIG_SGETMASK_SYSCALL is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_SYSCTL_SYSCALL is not set
@@ -264,9 +266,11 @@ CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
 CONFIG_HAVE_ARCH_SOFT_DIRTY=y
 CONFIG_MODULES_USE_ELF_RELA=y
 CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
 CONFIG_OLD_SIGSUSPEND3=y
 CONFIG_COMPAT_OLD_SIGACTION=y
 
@@ -357,7 +361,6 @@ CONFIG_IOSF_MBI=m
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_HYPERVISOR_GUEST is not set
 CONFIG_NO_BOOTMEM=y
-# CONFIG_MEMTEST is not set
 # CONFIG_MK8 is not set
 # CONFIG_MPSC is not set
 # CONFIG_MCORE2 is not set
@@ -388,7 +391,6 @@ CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
-CONFIG_X86_UP_APIC_MSI=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_X86_IO_APIC=y
 # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
@@ -408,7 +410,7 @@ CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
 CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_DIRECT_GBPAGES=y
+CONFIG_X86_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
 # CONFIG_AMD_NUMA is not set
 CONFIG_X86_64_ACPI_NUMA=y
@@ -456,6 +458,7 @@ CONFIG_CLEANCACHE=y
 # CONFIG_ZBUD is not set
 # CONFIG_ZSMALLOC is not set
 CONFIG_GENERIC_EARLY_IOREMAP=y
+# CONFIG_X86_PMEM_LEGACY is not set
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
 CONFIG_X86_RESERVE_LOW=64
@@ -516,6 +519,7 @@ CONFIG_PM_CLK=y
 CONFIG_ACPI=y
 CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
 CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
+CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
 CONFIG_ACPI_SLEEP=y
 # CONFIG_ACPI_PROCFS_POWER is not set
 # CONFIG_ACPI_EC_DEBUGFS is not set
@@ -639,7 +643,6 @@ CONFIG_AMD_NB=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
 CONFIG_BINFMT_SCRIPT=y
 # CONFIG_HAVE_AOUT is not set
@@ -926,7 +929,7 @@ CONFIG_DNS_RESOLVER=y
 # CONFIG_VSOCKETS is not set
 # CONFIG_NETLINK_MMAP is not set
 # CONFIG_NETLINK_DIAG is not set
-# CONFIG_NET_MPLS_GSO is not set
+# CONFIG_MPLS is not set
 # CONFIG_HSR is not set
 # CONFIG_NET_SWITCHDEV is not set
 CONFIG_RPS=y
@@ -956,11 +959,15 @@ CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
 CONFIG_BT_LE=y
 # CONFIG_BT_SELFTEST is not set
+# CONFIG_BT_DEBUGFS is not set
 
 #
 # Bluetooth device drivers
 #
+CONFIG_BT_INTEL=m
+CONFIG_BT_BCM=m
 CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_BCM=y
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
@@ -985,6 +992,7 @@ CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_CFG80211_INTERNAL_REGDB=y
 CONFIG_CFG80211_WEXT=y
+CONFIG_CFG80211_WEXT_EXPORT=y
 CONFIG_LIB80211=m
 CONFIG_LIB80211_CRYPT_WEP=m
 CONFIG_LIB80211_CRYPT_CCMP=m
@@ -1073,6 +1081,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_PMEM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -1366,13 +1375,7 @@ CONFIG_TUN=y
 # Distributed Switch Architecture drivers
 #
 # CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
 # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
 CONFIG_ETHERNET=y
 CONFIG_MDIO=y
 CONFIG_NET_VENDOR_3COM=y
@@ -1385,8 +1388,6 @@ CONFIG_VORTEX=y
 CONFIG_NET_VENDOR_AMD=y
 # CONFIG_AMD8111_ETH is not set
 CONFIG_PCNET32=y
-# CONFIG_AMD_XGBE is not set
-# CONFIG_NET_XGENE is not set
 CONFIG_NET_VENDOR_ARC=y
 CONFIG_NET_VENDOR_ATHEROS=y
 CONFIG_ATL2=y
@@ -1394,6 +1395,7 @@ CONFIG_ATL1=y
 CONFIG_ATL1E=y
 CONFIG_ATL1C=y
 CONFIG_ALX=y
+# CONFIG_NET_CADENCE is not set
 CONFIG_NET_VENDOR_BROADCOM=y
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
@@ -1497,7 +1499,6 @@ CONFIG_PHYLIB=y
 #
 CONFIG_AT803X_PHY=y
 CONFIG_AMD_PHY=y
-# CONFIG_AMD_XGBE_PHY is not set
 CONFIG_MARVELL_PHY=y
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
@@ -1610,13 +1611,7 @@ CONFIG_AR5523=m
 CONFIG_WCN36XX=m
 # CONFIG_WCN36XX_DEBUGFS is not set
 # CONFIG_B43 is not set
-# CONFIG_B43_BUSES_BCMA_AND_SSB is not set
-# CONFIG_B43_BUSES_BCMA is not set
-# CONFIG_B43_BUSES_SSB is not set
 # CONFIG_B43LEGACY is not set
-# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
 CONFIG_BRCMUTIL=m
 # CONFIG_BRCMSMAC is not set
 CONFIG_BRCMFMAC=m
@@ -1896,7 +1891,6 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_MFD_HSU is not set
 CONFIG_SERIAL_CORE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_SCCNXP is not set
@@ -2032,6 +2026,7 @@ CONFIG_PINCTRL=y
 #
 # CONFIG_DEBUG_PINCTRL is not set
 # CONFIG_PINCTRL_CHERRYVIEW is not set
+# CONFIG_PINCTRL_SUNRISEPOINT is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -2138,6 +2133,7 @@ CONFIG_SENSORS_IT87=m
 # CONFIG_SENSORS_NCT6683 is not set
 # CONFIG_SENSORS_NCT6775 is not set
 # CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_PMBUS is not set
 # CONFIG_SENSORS_SHT21 is not set
@@ -2225,6 +2221,7 @@ CONFIG_BCMA=m
 CONFIG_BCMA_HOST_PCI_POSSIBLE=y
 CONFIG_BCMA_HOST_PCI=y
 # CONFIG_BCMA_HOST_SOC is not set
+CONFIG_BCMA_DRIVER_PCI=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
 # CONFIG_BCMA_DEBUG is not set
 
@@ -2245,6 +2242,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_DLN2 is not set
 # CONFIG_MFD_MC13XXX_I2C is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
 # CONFIG_LPC_ICH is not set
 CONFIG_LPC_SCH=y
 # CONFIG_INTEL_SOC_PMIC is not set
@@ -2255,10 +2253,12 @@ CONFIG_LPC_SCH=y
 # CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_MAX14577 is not set
 # CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
 # CONFIG_MFD_MAX8907 is not set
 # CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_MAX8997 is not set
 # CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6397 is not set
 # CONFIG_MFD_MENF21BMC is not set
 # CONFIG_MFD_VIPERBOARD is not set
 # CONFIG_MFD_RETU is not set
@@ -2272,6 +2272,7 @@ CONFIG_MFD_RTSX_USB=y
 # CONFIG_MFD_SEC_CORE is not set
 # CONFIG_MFD_SI476X_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SKY81452 is not set
 # CONFIG_MFD_SMSC is not set
 # CONFIG_ABX500_CORE is not set
 # CONFIG_MFD_SYSCON is not set
@@ -2290,7 +2291,6 @@ CONFIG_MFD_RTSX_USB=y
 # CONFIG_TWL6040_CORE is not set
 # CONFIG_MFD_WL1273_CORE is not set
 # CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_TC3589X is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_VX855 is not set
 # CONFIG_MFD_ARIZONA_I2C is not set
@@ -2643,7 +2643,6 @@ CONFIG_MEDIA_TUNER_FC0013=m
 CONFIG_MEDIA_TUNER_TDA18212=m
 CONFIG_MEDIA_TUNER_E4000=m
 CONFIG_MEDIA_TUNER_FC2580=m
-CONFIG_MEDIA_TUNER_M88TS2022=m
 CONFIG_MEDIA_TUNER_M88RS6000T=m
 CONFIG_MEDIA_TUNER_TUA9001=m
 CONFIG_MEDIA_TUNER_SI2157=m
@@ -3018,6 +3017,7 @@ CONFIG_SND_HDA_CODEC_CMEDIA=m
 CONFIG_SND_HDA_CODEC_SI3054=m
 CONFIG_SND_HDA_GENERIC=m
 CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_CORE=m
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_UA101=m
@@ -3075,7 +3075,6 @@ CONFIG_DRAGONRISE_FF=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_HOLTEK is not set
 # CONFIG_HID_GT683R is not set
-# CONFIG_HID_HUION is not set
 # CONFIG_HID_KEYTOUCH is not set
 CONFIG_HID_KYE=y
 # CONFIG_HID_UCLOGIC is not set
@@ -3401,6 +3400,7 @@ CONFIG_LEDS_CLASS_FLASH=y
 # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
 #
 # CONFIG_LEDS_BLINKM is not set
+# CONFIG_LEDS_PM8941_WLED is not set
 
 #
 # LED Triggers
@@ -3441,6 +3441,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
@@ -3531,6 +3532,7 @@ CONFIG_RTS5208=y
 # CONFIG_VT6655 is not set
 CONFIG_VT6656=m
 # CONFIG_FB_SM7XX is not set
+# CONFIG_FB_SM750 is not set
 # CONFIG_FB_XGI is not set
 # CONFIG_FT1000 is not set
 
@@ -3668,6 +3670,7 @@ CONFIG_EXT4_FS=y
 CONFIG_EXT4_USE_FOR_EXT23=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_ENCRYPTION is not set
 # CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD2=y
 # CONFIG_JBD2_DEBUG is not set
@@ -3695,6 +3698,10 @@ CONFIG_BTRFS_FS=m
 # CONFIG_BTRFS_DEBUG is not set
 # CONFIG_BTRFS_ASSERT is not set
 # CONFIG_NILFS2_FS is not set
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_STAT_FS=y
+# CONFIG_F2FS_FS_XATTR is not set
+CONFIG_F2FS_CHECK_FS=y
 # CONFIG_FS_DAX is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_EXPORTFS=y
@@ -3786,10 +3793,6 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_PSTORE is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-CONFIG_F2FS_FS=y
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_F2FS_FS_XATTR is not set
-CONFIG_F2FS_CHECK_FS=y
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V2=y
@@ -3958,6 +3961,7 @@ CONFIG_PANIC_TIMEOUT=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
 # CONFIG_TIMER_STATS is not set
 
 #
@@ -3985,6 +3989,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 #
 # RCU Debugging
 #
+# CONFIG_PROVE_RCU is not set
 # CONFIG_SPARSE_RCU_POINTER is not set
 # CONFIG_TORTURE_TEST is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -4031,6 +4036,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_BPF is not set
 # CONFIG_TEST_FIRMWARE is not set
 # CONFIG_TEST_UDELAY is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -4222,6 +4228,7 @@ CONFIG_KVM_COMPAT=y
 CONFIG_RAID6_PQ=m
 CONFIG_BITREVERSE=y
 # CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GENERIC_NET_UTILS=y

projects/RPi/options

@@ -57,7 +57,7 @@
 
   # Kernel to use. values can be:
   # default:  default mainline kernel
-    LINUX="default"
+    LINUX="4.0"
 
   # NOOBS supported hex versions
     NOOBS_HEX="2,3,4,5,6,7,8,9,d,e,f,10,11,12,14,19"

projects/RPi2/options

@@ -57,7 +57,7 @@
 
   # Kernel to use. values can be:
   # default:  default mainline kernel
-    LINUX="default"
+    LINUX="4.0"
 
   # NOOBS supported hex versions
     NOOBS_HEX="1040,1041"