* 🎵 Fast forward audio resampling. Solves #15160.
Previously, we avoided doing any resampling while fastforwarding based
on the assumption it was impossible to make the audio not crackle due to
both flush-to-flush timing fluctuations and timer accuracy.
However, turns out this is not the case. The audio doesn't "crackle" per
se when the timing fluctuates! It's just that the sounds don't make
sense since the time compression and decompression caused by the flush
time fluctuations mess with the audio consistency.
To work around that, we introduce a running average flush delta time
that makes sure the audio is both resampled to approximately the correct
rate and consistent.
This was tested in two settings:
- Limited rate fastforwarding (2x-4x)
- Unlimited fastforwarding
In both cases it seems to work well, but with unlimited fastforwarding
it's just high pitched and annoying, so this is probably the most useful
in the 2x to 4x range.
* Move declartion to support C89
* resampling ratio upper and lower bounds
* Add toggle for speeding up audio
If cores are not deterministic, or if they only have bounded
determinism, we can obtain less drift if replay files also contain
periodic checkpoint states. These are configured by the new retroarch
stting replay_checkpoint_interval (measured in seconds). States are
inserted into the replay file in between frames.
This patch also fixes the settings display for the replay
autoincrement max keep setting.
* Add bsv replay controls (not yet fully implemented), remove toggle
see notes in task_movie.c, make sure command.c calls the right
functions, check retroarch.c and other todos.
bsv files are also now stored with states, not saves.
* Compilation fixes
* Added command impls for play and record replay, and some code in load state to do the right thing there
* Guard some parts of the new code with HAVE_BSV_MOVIE
* wip, menu fixes
* more menu fixes, osd for movie errors, halt recording properly
* Menu and label fixes
* move bsvs to own file suffix series under savestates, fix recording and playback command validity checks
* Fix replay autoincrement
* fix endif placement, whoops
---------
Co-authored-by: Joseph C. Osborn <jcoa2018@pomona.edu>
ever implemented for OpenGL2 driver, lots of code debt, best to
instead just keep improving the overlay system instead which is
already available for most video drivers
The initial popup screen advertising the web server did not prevent
keys from passing through, so interactions with the alert would also
be handled by the menu. The alert would pop up any time there was a
network reconfiguration; now it only pops up once per run. Added a way
to turn off the webserver advertisement alert permanently.
Also fixed a bug around filtering the Siri remote out, and turning
controllers off while the app is running.
This adds mFI as a controller driver for OSX, as well as adding rumble
support for mFI controllers. Also add support for the Home button.
Also fixed a couple warnings.
* remove var error in psl1ght input
* (psl1ght) add modern_alpha_blend and modern_opaque rsx shaders
* (psl1ght) add perf improvements to the rsx driver
* add rsx gfx for psl1ght
* (psl1ght) set rsx as a compatible video driver
* Do xmb menu scaling for psl1ght
* (psl1ght) update Makefile to use latest shaders and more UI menu options
- 'Unlocks/Mastery' split into two options
- 'Account/Login Messages' split off from 'Verbose', gated all login success/error messages
- menu_cbs_sublabel.c - Now in same order as menu options
- menu_setting.c - VISIBILITY_UNLOCK default value now uses define
- All suggested text/cleanup changes from Jamiras
- Startup Summary split off from Verbose Mode, added option to hide for games with zero core cheevos
- Some existing options moved into this submenu
- Leaderboard-related options coming in future PR
When running on Android, RetroArch considers most devices that emit dpad events as gamepads, even if they also emit other keyboard events; this is usually the right thing to do, but it has the side effect of not letting some actual keyboards (e.g.: Logitech K480) act as such inside RetroArch. This configuration option allows users to manually select a specific input device to act as a physical keyboard instead of a gamepad, which is handy when emulating computers as opposed to consoles.
using roughly the same implementation for the ok/notice/cancel sounds, but i've made an exclusive function for scrolling since it's going to be called a lot more than those sounds
* Allow repositioning of achievement notifications
* PS4/ORBIS build fix
Would have thought cheevos-related notification code was wrapped in HAVE_CHEEVOS, but guess not.
* Add xdelta in deps
* Include <assert.h> in xdelta3.h
- Otherwise the static_assert calls can fail
* Build xdelta3 in Makefile.common
* Add xdelta support to the softpatching infrastructure
- The patching itself isn't fully implemented yet
* Adjust how xdelta3.h checks the sizes of some types
- Now checks max values instead of relying on autotools
* First crack at xdelta softpatching support
- There may be undiscovered edge cases or bugs
* Add xdelta in deps
* Include <assert.h> in xdelta3.h
- Otherwise the static_assert calls can fail
* Build xdelta3 in Makefile.common
* Add xdelta support to the softpatching infrastructure
- The patching itself isn't fully implemented yet
* Adjust how xdelta3.h checks the sizes of some types
- Now checks max values instead of relying on autotools
* First crack at xdelta softpatching support
- There may be undiscovered edge cases or bugs
* Remove trailing commas from the enums I modified
- C89 doesn't allow them
* Remove stray whitespace
* Adjust SIZE macros in xdelta3.h
- Move them outside the XD3_USE_LARGEFILE64 block
- Add more SIZE declarations
- Make SIZEOF_UNSIGNED_LONG_LONG contingent on the presence of ULLONG_MAX
* Add some RARCH_DBG calls for xdelta patching
* Enable support for xdelta's secondary compressors
- Necessary for some patches
* Fix some format specifiers
* Remove unnecessary files from xdelta
* Include xdelta3.h with a relative path
* Add xdelta3 headers to HEADERS variable
* Gate Xdelta support behind HAVE_XDELTA
- HAVE_XDELTA is on by default
- HAVE_PATCH is still required for HAVE_XDELTA to be meaningful
- Support is mostly contingent on the availability of LZMA
- Anything modern should be okay
- Legacy platforms (e.g. DOS) may need to have Xdelta support disabled
- At least until some other solution can be found
* Disable HAVE_XDELTA on platforms where the build recently failed
- These come from looking at the failed builds on GitHub
- These are guesses, and may turn out to be wrong
* Fix a potential memory leak
- Whoops, looks like I need to call two cleanup functions
- xd3_close_stream exists separately from xd3_free_stream
* Split the --help printout for --xdelta into its own strlcat call
- GCC was complaining about #ifdefs within macro arguments being non-portable
* Fix some incorrect printf format specifiers
* Modify Xdelta to adhere to C89
- It's mostly using RetroArch's INLINE macro instead of the inline keyword
- New descriptors: 'dpad_area' and 'abxy_area'
- Each has a diagonal sensitivity setting, 100% being 8-way symmetry
- Buttons can be redefined in the cfg file
E.g. This would create a d-pad area, then redefine it to use analog directions:
overlay0_desc0 = "dpad_area,0.85,0.57,rect,0.166228,0.295516"
overlay0_desc0_up = "r_y_minus"
overlay0_desc0_down = "r_y_plus"
overlay0_desc0_left = "r_x_minus"
overlay0_desc0_right = "r_x_plus"
