RetroArch/retroarch.cfg
Nikos Chantziaras be650a790c
Add option for showing the overlay behind the menu (#13360)
* Add option for showing the overlay behind the menu

This commit lays the groundwork for this option. Support for this option
in the video drivers themselves is going to be added in later commits.

* gl1: Add overlay behind menu support

* gl2: Add overlay behind menu support

* gl3: Add overlay behind menu support

* vulkan: Add overlay behind menu support

* ctr: Add overlay behind menu support

* d3d9: Add overlay behind menu support

* d3d10: Add overlay behind menu support

* d3d11: Add overlay behind menu support

* d3d12: Add overlay behind menu support

* CHANGES.md: overlay behind menu

Co-authored-by: MrHuu <MrHuu@users.noreply.github.com>
Co-authored-by: Tony <45124675+sonninnos@users.noreply.github.com>
2021-12-26 04:56:44 +01:00

1015 lines
33 KiB
INI

## Skeleton config file for RetroArch
# If set to a directory, the content history playlist will be saved
# to this directory.
# content_history_dir =
# Automatically saves a savestate at the end of RetroArch's lifetime.
# The path is $SRAM_PATH.auto.
# RetroArch will automatically load any savestate with this path on startup if savestate_auto_load is set.
# savestate_auto_save = false
# savestate_auto_load = true
# Load libretro from a dynamic location for dynamically built RetroArch.
# This option is mandatory.
# Path to a libretro implementation.
# libretro_path = "/path/to/libretro.so"
# Sets log level for libretro cores (GET_LOG_INTERFACE).
# If a log level issued by a libretro core is below libretro_log_level, it is ignored.
# DEBUG logs are always ignored unless verbose mode is activated (--verbose).
# DEBUG = 0, INFO = 1, WARN = 2, ERROR = 3.
# libretro_log_level = 0
# Enable or disable verbosity level of frontend.
# log_verbosity = false
# If this option is enabled, every content file loaded in RetroArch will be
# automatically added to a history list.
# history_list_enable = true
# Enable performance counters
# perfcnt_enable = false
# Path to core options config file.
# This config file is used to expose core-specific options.
# It will be written to by RetroArch.
# A default path will be assigned if not set.
# core_options_path =
# Path to content history file.
# RetroArch keeps track of all content loaded in the menu and from CLI directly for convenient quick loading.
# A default path will be assigned if not set.
# content_history_path =
# Path to music content history file (optional).
# RetroArch keeps track of all music content loaded in the menu and from CLI directly for convenient quick loading.
# A default path will be assigned if not set.
# content_music_history_path =
# Path to image content history file (optional).
# RetroArch keeps track of all image content loaded in the menu and from CLI directly for convenient quick loading.
# A default path will be assigned if not set.
# content_image_history_path =
# Path to video content history file (optional).
# RetroArch keeps track of all video content loaded in the menu and from CLI directly for convenient quick loading.
# A default path will be assigned if not set.
# content_video_history_path =
# Number of entries that will be kept in content history file.
# content_history_size = 200
# Content directory. Interacts with RETRO_ENVIRONMENT_GET_CONTENT_DIRECTORY.
# Usually set by developers who bundle libretro/RetroArch apps to point to assets.
# content_directory =
# Sets start directory for menu config browser.
# rgui_config_directory =
# Show startup screen in menu.
# Is automatically set to false when seen for the first time.
# This is only updated in config if config_save_on_exit is set to true, however.
# rgui_show_start_screen = true
# Flushes config to disk on exit. Useful for menu as settings can be modified.
# Overwrites the config. #include's and comments are not preserved.
# config_save_on_exit = true
# Shows hidden files and folders in directory listings.
# show_hidden_files = false
#### Driver
# Input driver. Depending on video driver, it might force a different input driver.
# input_driver = sdl
# Joypad driver. ("udev", "linuxraw", "paraport", "sdl2", "hid", "dinput")
# input_joypad_driver =
# Video driver to use. "gl", "xvideo", "sdl", "d3d"
# video_driver = "gl"
# Which context implementation to use.
# Possible ones for desktop are: glx, x-egl, kms-egl, sdl-gl, wgl.
# By default, tries to use first suitable driver.
# video_context_driver =
# Audio driver backend. Depending on configuration possible candidates are: alsa, pulse, oss, jack, rsound, roar, openal, sdl, xaudio.
# audio_driver =
# Audio resampler driver backend. Which audio resampler to use.
# Default will use "sinc".
# audio_resampler =
# Camera driver.
# camera_driver =
# Location driver.
# location_driver =
# Menu driver to use. ("rgui", "xmb", "glui")
# menu_driver = "rgui"
# Record driver. Used when recording video.
# record_driver =
#### Video
# Suspends the screensaver if set to true. Is a hint that does not necessarily have to be honored
# by video driver.
# suspend_screensaver_enable = true
# Display framerate.
# fps_show = false
# Display memory.
# memory_show = false
# Display total number of frames rendered. (only displays if fps_show is enabled)
# framecount_show =
# Which monitor to prefer. 0 (default) means no particular monitor is preferred, 1 and up (1 being first monitor),
# suggests RetroArch to use that particular monitor.
# video_monitor_index = 0
# Start in fullscreen. Can be changed at runtime.
# video_fullscreen = false
# If fullscreen, prefer using a windowed fullscreen mode.
# video_windowed_fullscreen = true
# Fullscreen resolution. Resolution of 0 uses the resolution of the desktop.
# video_fullscreen_x = 0
# video_fullscreen_y = 0
# Video refresh rate of your CRT monitor.
# Used to calculate a suitable audio input rate.
# crt_video_refresh_rate = 59.94
# Video refresh rate of your monitor.
# Used to calculate a suitable audio input rate.
# video_refresh_rate = 59.94
# Forcibly disable sRGB FBO support. Some Intel OpenGL drivers on Windows
# have video problems with sRGB FBO support enabled.
# video_force_srgb_disable = false
# If this is true and video_aspect_ratio is not set,
# aspect ratio is decided by libretro implementation.
# If this is false, 1:1 PAR will always be assumed if video_aspect_ratio is not set.
# video_aspect_ratio_auto = false
# A floating point value for video aspect ratio (width / height).
# If this is not set, aspect ratio is assumed to be automatic.
# Behavior then is defined by video_aspect_ratio_auto.
# video_aspect_ratio =
# Windowed x resolution scale and y resolution scale
# (Real x res: base_size * xscale * aspect_ratio, real y res: base_size * yscale)
# video_scale = 3.0
# Percentage of opacity to use for the window (100 is completely opaque).
# video_window_opacity = 100
# Whether to enable the default window decorations like border, titlebar etc.
# video_window_show_decorations = true
# Forcibly disable composition. Only works in Windows Vista/7 for now.
# video_disable_composition = false
# Video vsync.
# video_vsync = true
# Interval at which a Vsync swap is performed.
# 1 is normal, 2 is doubled frames, 3 is tripled frames, etc.
# video_swap_interval = 1
# Max amount of swapchain images.
# Single buffering = 1, Double buffering = 2, 3 = Triple buffering
# video_max_swapchain_images = 3
# Attempts to hard-synchronize CPU and GPU. Can reduce latency at cost of performance.
# video_hard_sync = false
# Sets how many frames CPU can run ahead of GPU when using video_hard_sync.
# Maximum is 3.
# video_hard_sync_frames = 0
# Sets how many milliseconds to delay after VSync before running the core.
# Can reduce latency at cost of higher risk of stuttering.
# Maximum is 15.
# video_frame_delay = 0
# Inserts a black frame inbetween frames.
# Useful for 120 Hz monitors who want to play 60 Hz material with eliminated ghosting.
# video_refresh_rate should still be configured as if it is a 60 Hz monitor (divide refresh rate by 2).
# video_black_frame_insertion = false
# Use threaded video driver. Using this might improve performance at possible cost of latency and more video stuttering.
# video_threaded = false
# Use a shared context for HW rendered libretro cores.
# Avoids having to assume HW state changes inbetween frames.
# video_shared_context = false
# Smoothens picture with bilinear filtering. Should be disabled if using pixel shaders.
# video_smooth = true
# Forces rendering area to stay equal to content aspect ratio or as defined in video_aspect_ratio.
# video_force_aspect = true
# Only scales video in integer steps.
# The base size depends on system-reported geometry and aspect ratio.
# If video_force_aspect is not set, X/Y will be integer scaled independently.
# video_scale_integer = false
# Index of the aspect ratio selection in the menu.
# 20 = Config, 21 = 1:1 PAR, 22 = Core Provided, 23 = Custom Aspect Ratio
# aspect_ratio_index = 20
# Forces cropping of overscanned frames.
# Exact behavior of this option is implementation specific.
# video_crop_overscan = true
# Path to shader. Shader can be either Cg, CGP (Cg preset) or GLSL, GLSLP (GLSL preset)
# video_shader = "/path/to/shader.{cg,cgp,glsl,glslp}"
# Load video_shader on startup.
# Other shaders can still be loaded later in runtime.
# video_shader_enable = false
# CPU-based video filter. Path to a dynamic library.
# video_filter =
# Path to a font used for rendering messages. This path must be defined to enable fonts.
# Do note that the _full_ path of the font is necessary!
# video_font_path =
# Size of the font rendered in points.
# video_font_size = 32
# Enable usage of OSD messages.
# video_font_enable = true
# Offset for where messages will be placed on screen. Values are in range 0.0 to 1.0 for both x and y values.
# [0.0, 0.0] maps to the lower left corner of the screen.
# video_message_pos_x = 0.05
# video_message_pos_y = 0.05
# Color for message. The value is treated as a hexadecimal value.
# It is a regular RGB hex number, i.e. red is "ff0000".
# video_message_color = ffffff
# Background color for OSD messages. Red/Green/Blue values are from 0 to 255 and opacity is 0.0 to 1.0.
# video_message_bgcolor_enable = false
# video_message_bgcolor_red = 0
# video_message_bgcolor_green = 0
# video_message_bgcolor_blue = 0
# video_message_bgcolor_opacity = 1.0
# Allows libretro cores to set rotation modes.
# Setting this to false will honor, but ignore this request.
# This is useful for vertically oriented content where one manually rotates the monitor.
# video_allow_rotate = true
# Forces a certain rotation of the video.
# The rotation is added to rotations which the libretro core sets (see video_allow_rotate).
# The angle is <value> * 90 degrees counter-clockwise.
# video_rotation = 0
# Forces a certain orientation of the screen from the operating system.
# The angle is <value> * 90 degrees counter-clockwise.
# screen_orientation = 0
# HDR settings
# video_hdr_enable = false
# video_hdr_max_nits = 1000.0f
# video_hdr_paper_white_nits = 200.0f
# video_hdr_contrast = 1.0f
# video_hdr_expand_gamut = true
#### Audio
# Enable audio.
# audio_enable = true
# Enable menu audio sounds.
# audio_enable_menu = false
# audio_enable_menu_ok = false
# audio_enable_menu_cancel = false
# audio_enable_menu_notice = false
# audio_enable_menu_bgm = false
# Mutes audio.
# audio_mute_enable = false
# Mutes audio mixer volume globally.
# audio_mixer_mute_enable = false
# Audio output samplerate.
# audio_out_rate = 48000
# Override the default audio device the audio_driver uses. This is driver dependant. E.g. ALSA wants a PCM device, OSS wants a path (e.g. /dev/dsp), Jack wants portnames (e.g. system:playback1,system:playback_2), and so on ...
# audio_device =
# Audio DSP plugin that processes audio before it's sent to the driver. Path to a dynamic library.
# audio_dsp_plugin =
# Will sync (block) on audio. Recommended.
# audio_sync = true
# Desired audio latency in milliseconds. Might not be honored if driver can't provide given latency.
# audio_latency = 64
# Enable audio rate control.
# audio_rate_control = true
# Controls audio rate control delta. Defines how much input rate can be adjusted dynamically.
# Input rate = in_rate * (1.0 +/- audio_rate_control_delta)
# audio_rate_control_delta = 0.005
# Controls maximum audio timing skew. Defines the maximum change in input rate.
# Input rate = in_rate * (1.0 +/- max_timing_skew)
# audio_max_timing_skew = 0.05
# Audio volume. Volume is expressed in dB.
# 0 dB is normal volume. No gain will be applied.
# Gain can be controlled in runtime with input_volume_up/input_volume_down.
# audio_volume = 0.0
# Audio mixer volume. Volume is expressed in dB.
# 0 dB is normal volume. No gain will be applied.
# audio_mixer_volume = 0.0
#### Overlay
# Enable the overlay.
# input_overlay_enable = true
# Show the overlay behind the menu instead of in front.
# input_overlay_behind_menu = "false"
# Hide the current overlay from appearing inside the menu.
# input_overlay_hide_in_menu = true
# Path to input overlay.
# input_overlay =
# Opacity of all the UI elements of the overlay.
# input_overlay_opacity = 1.0
# Scale of all UI elements of the overlay.
# input_overlay_scale = 1.0
# Center of all UI elements of the overlay.
# input_overlay_center_x = 0.5
# input_overlay_center_y = 0.5
#### Input
# Path to input remapping file.
# input_remapping_path =
# Input bind timer timeout.
# Amount of seconds to wait until proceeding to the next bind. Default: 5, minimum: 1
# input_bind_timeout = 1
# If enabled, overrides the input binds with the remapped binds set for the current core.
# input_remap_binds_enable = true
# Maximum amount of users supported by RetroArch.
# input_max_users = 16
# Keyboard layout for input driver if applicable (udev/evdev for now).
# Syntax is either just layout (e.g. "no"), or a layout and variant separated with colon ("no:nodeadkeys").
# input_keyboard_layout =
# Defines axis threshold. Possible values are [0.0, 1.0]
# input_axis_threshold = 0.5
# input_analog_deadzone = 0.0
# input_analog_sensitivity = 1.0
# Enable input auto-detection. Will attempt to autoconfigure
# joypads, Plug-and-Play style.
# input_autodetect_enable = true
# Show the input descriptors set by the core instead of the
# default ones.
# input_descriptor_label_show = true
# Hide input descriptors that were not set by the core.
# input_descriptor_hide_unbound = false
# Influence how input polling is done inside RetroArch.
# 0 : Early - Input polling is performed before call to retro_run.
# 1 : Normal - Input polling is performed when retro_input_poll is
# requested.
# 2 : Late - Input polling is performed on first call to retro_input_state
# per frame
#
# Setting it to 0 or 2 can result in less latency depending on
# your configuration.
#
# When netplay is enabled, the default polling behavior (1) will
# be used regardless of the value set here.
# input_poll_type_behavior = 1
# Sets which libretro device is used for a user.
# Devices are indentified with a number.
# This is normally saved by the menu.
# Device IDs are found in libretro.h.
# These settings are overridden by explicit command-line arguments which refer to input devices.
# None: 0
# Joypad (RetroPad): 1
# Mouse: 2
# Keyboard: 3
# Generic Lightgun: 4
# Joypad w/ Analog (RetroPad + Analog sticks): 5
# Multitap (SNES specific): 257
# Super Scope (SNES specific): 260
# Justifier (SNES specific): 516
# Justifiers (SNES specific): 772
# input_libretro_device_p1 =
# input_libretro_device_p2 =
# input_libretro_device_p3 =
# input_libretro_device_p4 =
# input_libretro_device_p5 =
# input_libretro_device_p6 =
# input_libretro_device_p7 =
# input_libretro_device_p8 =
# Keyboard input. Will recognize letters ("a" to "z") and the following special keys (where "kp_"
# is for keypad keys):
#
# left, right, up, down, enter, kp_enter, tab, insert, del, end, home,
# rshift, shift, ctrl, alt, space, escape, add, subtract, kp_plus, kp_minus,
# f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12,
# num0, num1, num2, num3, num4, num5, num6, num7, num8, num9, pageup, pagedown,
# keypad0, keypad1, keypad2, keypad3, keypad4, keypad5, keypad6, keypad7, keypad8, keypad9,
# period, capslock, numlock, backspace, multiply, divide, print_screen, scroll_lock,
# tilde, backquote, pause, quote, comma, minus, slash, semicolon, equals, leftbracket,
# backslash, rightbracket, kp_period, kp_equals, rctrl, ralt
#
# Keyboard input, Joypad and Joyaxis will all obey the "nul" bind, which disables the bind completely,
# rather than relying on a default.
# input_player1_a = "x"
# input_player1_b = "z"
# input_player1_y = "a"
# input_player1_x = "s"
# input_player1_start = "enter"
# input_player1_select = "rshift"
# input_player1_l = "q"
# input_player1_r = "w"
# input_player1_left = "left"
# input_player1_right = "right"
# input_player1_up = "up"
# input_player1_down = "down"
# input_player1_l2 =
# input_player1_r2 =
# input_player1_l3 =
# input_player1_r3 =
# Two analog sticks (DualShock-esque).
# Bound as usual, however, if a real analog axis is bound,
# it can be read as a true analog.
# Positive X axis is right, Positive Y axis is down.
# input_player1_l_x_plus =
# input_player1_l_x_minus =
# input_player1_l_y_plus =
# input_player1_l_y_minus =
# input_player1_r_x_plus =
# input_player1_r_x_minus =
# input_player1_r_y_plus =
# input_player1_r_y_minus =
# If desired, it is possible to override which joypads are being used for user 1 through 8.
# First joypad available is 0.
# input_player1_joypad_index = 0
# input_player2_joypad_index = 1
# input_player3_joypad_index = 2
# input_player4_joypad_index = 3
# input_player5_joypad_index = 4
# input_player6_joypad_index = 5
# input_player7_joypad_index = 6
# input_player8_joypad_index = 7
# Input device buttons.
# Figure these out by using RetroArch-Phoenix or retroarch-joyconfig.
# You can use joypad hats with hnxx, where n is the hat, and xx is a string representing direction.
# E.g. "h0up"
# input_player1_a_btn =
# input_player1_b_btn =
# input_player1_y_btn =
# input_player1_x_btn =
# input_player1_start_btn =
# input_player1_select_btn =
# input_player1_l_btn =
# input_player1_r_btn =
# input_player1_left_btn =
# input_player1_right_btn =
# input_player1_up_btn =
# input_player1_down_btn =
# input_player1_l2_btn =
# input_player1_r2_btn =
# input_player1_l3_btn =
# input_player1_r3_btn =
# Menu buttons.
# menu_search_btn =
# menu_info_btn =
# menu_default_btn =
# menu_scroll_down_btn =
# menu_scroll_up_btn =
# Swap buttons for OK/Cancel
# menu_swap_ok_cancel_buttons = false
# Axis for RetroArch D-Pad.
# Needs to be either '+' or '-' in the first character signaling either positive or negative direction of the axis, then the axis number.
# Do note that every other input option has the corresponding _btn and _axis binds as well; they are omitted here for clarity.
# input_player1_left_axis =
# input_player1_right_axis =
# input_player1_up_axis =
# input_player1_down_axis =
# Holding the turbo while pressing another button will let the button enter a turbo mode
# where the button state is modulated with a periodic signal.
# The modulation stops when the button itself (not turbo button) is released.
# input_player1_turbo =
# Describes the period and how long of that period a turbo-enabled button should behave.
# Numbers are described in frames.
# input_turbo_period = 6
# input_turbo_duty_cycle = 3
# This goes all the way to user 8 (*_player2_*, *_player3_*, etc), but omitted for clarity.
# All input binds have corresponding binds for keyboard (none), joykeys (_btn) and joyaxes (_axis) as well.
# Toggles fullscreen.
# input_toggle_fullscreen = f
# Saves state.
# input_save_state = f2
# Loads state.
# input_load_state = f4
# State slots. With slot set to 0, save state name is *.state (or whatever defined on commandline).
# When slot is != 0, path will be $path%d, where %d is slot number.
# input_state_slot_increase = f7
# input_state_slot_decrease = f6
# Toggles between fast-forwarding and normal speed.
# input_toggle_fast_forward = space
# Hold for fast-forward. Releasing button disables fast-forward.
# input_hold_fast_forward = l
# Key to exit RetroArch cleanly.
# Killing it in any hard way (SIGKILL, etc) will terminate RetroArch without saving RAM, etc.
# On Unix-likes, SIGINT/SIGTERM allows a clean deinitialization.
# input_exit_emulator = escape
# Applies next and previous shader in directory.
# input_shader_next = m
# input_shader_prev = n
# Hold button down to rewind. Rewinding must be enabled.
# input_rewind = r
# Toggle between recording and not.
# input_movie_record_toggle = o
# Toggle between paused and non-paused state
# input_pause_toggle = p
# Frame advance when content is paused
# input_frame_advance = k
# Reset the content.
# input_reset = h
# Cheats.
# input_cheat_index_plus = y
# input_cheat_index_minus = t
# input_cheat_toggle = u
# Mute/unmute audio
# input_audio_mute = f9
# Take screenshot
# input_screenshot = f8
# Netplay flip users.
# input_netplay_flip_players = i
# Hold for slowmotion.
# input_slowmotion = e
# Enable other hotkeys.
# If this hotkey is bound to either keyboard, joybutton or joyaxis,
# all other hotkeys will be disabled unless this hotkey is also held at the same time.
# This is useful for RETRO_KEYBOARD centric implementations
# which query a large area of the keyboard, where it is not desirable
# that hotkeys get in the way.
# Alternatively, all hotkeys for keyboard could be disabled by the user.
# input_enable_hotkey_btn =
# Adds a delay in frames before the assigned hotkey blocks input. Useful if the the
# hotkey input is mapped to another action.
# input_hotkey_block_delay = "5"
# Increases audio volume.
# input_volume_up = kp_plus
# Decreases audio volume.
# input_volume_down = kp_minus
# Toggles to next overlay. Wraps around.
# input_overlay_next =
# Toggles eject for disks. Used for multiple-disk content.
# input_disk_eject_toggle =
# Cycles through disk images. Use after ejecting.
# Complete by toggling eject again.
# input_disk_next =
# Toggles menu.
# input_menu_toggle = f1
# Toggles display of on-screen technical statistics.
# input_toggle_statistics =
# RetroPad button combination to toggle menu
# 0: None
# 1: Down + Y + L1 + R1
# 2: L3 + R3
# 3: L1 + R1 + Start + Select
# 4: Start + Select
# 5: L3 + R1
# 6: L1 + R1
# 7: Hold Start (2 seconds)
# 8: Hold Select (2 seconds)
# 9: Down + Select
# 10: L2 + R2
# input_menu_toggle_gamepad_combo = 0
# RetroPad button combination to quit
# 0: None
# 1: Down + Y + L1 + R1
# 2: L3 + R3
# 3: L1 + R1 + Start + Select
# 4: Start + Select
# 5: L3 + R1
# 6: L1 + R1
# 7: Hold Start (2 seconds)
# 8: Hold Select (2 seconds)
# 9: Down + Select
# 10: L2 + R2
# input_quit_gamepad_combo = 0
# allow any RetroPad to control the menu
# all_users_control_menu = false
# Toggles mouse grab. When mouse is grabbed, RetroArch hides the mouse,
# and keeps the mouse pointer inside the window to allow relative mouse input
# to work better.
# input_grab_mouse_toggle = f11
#### Menu
# If disabled, will hide 'Online Updater' inside the menu.
# menu_show_online_updater = true
# If disabled, will hide the ability to update cores (and core info files) inside the menu.
# menu_show_core_updater = true
# If disabled, the libretro core will keep running in the background when we
# are in the menu.
# menu_pause_libretro = false
# If disabled, we use separate controls for menu operation.
# menu_unified_controls = false
# Enable mouse controls inside the menu.
# menu_mouse_enable = false
# Enable touch controls inside the menu.
# menu_pointer_enable = false
# Shows current date and/or time inside menu.
# menu_timedate_enable = true
# Shows current battery level inside menu.
# menu_battery_level_enable = true
# Shows current core inside menu.
# menu_core_enable = true
# Path to an image to set as menu wallpaper.
# menu_wallpaper =
# Dynamically load a new wallpaper depending on context.
# menu_dynamic_wallpaper_enable = false
# Type of thumbnail to display. 0 = none, 1 = snaps, 2 = titles, 3 = boxarts
# menu_thumbnails = 0
# menu_left_thumbnails = 0
# Wrap-around to beginning and/or end if boundary of list is reached horizontally or vertically.
# menu_navigation_wraparound_enable = false
# Filter files being shown in filebrowser by supported extensions.
# menu_navigation_browser_filter_supported_extensions_enable = true
# Collapse subgroup settings into main group to create one big listing of settings
# per category.
# menu_collapse_subgroups_enable = false
#### Core
#
# Prevent libretro cores from closing RetroArch on exit by loading a dummy core.
# load_dummy_on_core_shutdown = "true"
# Check for firmware requirement(s) before loading a content.
# check_firmware_before_loading = "false"
#### User Interface
# Start UI companion driver's interface on boot (if available).
# ui_companion_start_on_boot = true
# Toggle companion UI on startup (currently only used to show the WIMP UI)
# ui_companion_toggle = false
# Only init the WIMP UI for this session if this is enabled
# desktop_menu_enable = true
#### Camera
# Override the default camera device the camera driver uses. This is driver dependant.
# camera_device =
# Override the default privacy permission for cores that want to access camera services. Is "false" by default.
# camera_allow = false
#### Location
# Override the default privacy permission for cores that want to access location services. Is "false" by default.
# location_allow = false
#### Core Updater
# URL to core update directory on buildbot.
# core_updater_buildbot_url = "http://buildbot.libretro.com"
# URL to assets update directory on buildbot.
# core_updater_buildbot_assets_url = "http://buildbot.libretro.com/assets/"
# After downloading, automatically extract archives that the downloads are contained inside.
# core_updater_auto_extract_archive = true
#### Network
# When being client over netplay, use keybinds for user 1.
# netplay_client_swap_input = false
# The username of the person running RetroArch. This will be used for playing online, for instance.
# netplay_nickname =
# The amount of delay frames to use for netplay. Increasing this value will increase
# performance, but introduce more latency.
# netplay_delay_frames = 0
# Netplay mode for the current user.
# false is Server, true is Client.
# netplay_mode = false
# Enable or disable spectator mode for the user during netplay.
# netplay_spectator_mode_enable = false
# The IP Address of the host to connect to.
# netplay_ip_address =
# The port of the host IP Address. Can be either a TCP or UDP port.
# netplay_ip_port = 55435
# Force game hosting to go through a man-in-the-middle server to get around firewalls and NAT/UPnP problems.
# netplay_use_mitm_server = false
# The requested MITM server to use.
# netplay_mitm_server = "nyc"
#### Directory
# Sets the System/BIOS directory.
# Implementations can query for this directory to load BIOSes, system-specific configs, etc.
# system_directory =
# Save all downloaded files to this directory.
# core_assets_directory =
# Assets directory. This location is queried by default when menu interfaces try to look for
# loadable assets, etc.
# assets_directory =
# Dynamic wallpapers directory. The place to store the wallpapers dynamically
# loaded by the menu depending on context.
# dynamic_wallpapers_directory =
# Thumbnails directory. To store thumbnail files.
# thumbnails_directory =
# File browser directory. Sets start directory for menu file browser.
# rgui_browser_directory =
# Core directory for libretro core implementations.
# libretro_directory =
# Core info directory for libretro core information.
# libretro_info_path =
# Path to content database directory.
# content_database_path =
# Saved queries are stored to this directory.
# cursor_directory =
# Path to cheat database directory.
# cheat_database_path =
# Defines a directory where CPU-based video filters are kept.
# video_filter_dir =
# Directory where DSP plugins are kept.
# audio_filter_dir =
# Defines a directory where shaders (Cg, CGP, GLSL) are kept for easy access.
# video_shader_dir =
# Recording output directory. Where recordings are saved.
# recording_output_directory =
# Recording config directory. Where recording settings are kept.
# recording_config_directory =
# Overlay directory. Where overlays are kept for easy access.
# overlay_directory =
# Directory to dump screenshots to.
# screenshot_directory =
# Directory for joypad autoconfigs.
# If a joypad is plugged in, that joypad will be autoconfigured if a config file
# corresponding to that joypad is present in joypad_autoconfig_dir.
# Input binds which are made explicit (input_playerN_*_btn/axis) will take priority over autoconfigs.
# Autoconfigs can be created with retroarch-joyconfig, manually, or with a frontend.
# Requires input_autodetect_enable to be enabled.
# joypad_autoconfig_dir =
# Save all remapped controls to this directory.
# input_remapping_directory =
# Save all playlists/collections to this directory.
# playlist_directory =
# Save all save files (*.srm) to this directory. This includes related files like .bsv, .rtc, .psrm, etc ...
# This will be overridden by explicit command line options.
# savefile_directory =
# Save all save states (*.state) to this directory.
# This will be overridden by explicit command line options.
# savestate_directory =
# If set to a directory, content which is temporarily extracted
# will be extracted to this directory.
# cache_directory =
#### RetroAchievements
# Enable the RetroAchievements feature.
# cheevos_enable = false
# RetroAchievements.org credentials.
# cheevos_username =
# cheevos_password =
# The hardcore mode disables savestates and cheating features, but it
# makes the achievements points double.
# cheevos_hardcore_mode_enable = false
# Play the 'unlock' audio sound when an achievement is unlocked.
# cheevos_unlock_sound_enable = false
# Show RetroAchievements related messages right after loading a game, such as
# successfull login and the number of cheevos you have unlocked for the game.
# cheevos_verbose_enable = false
# Show achievements' badges in Quick Menu > Achievements List.
# (note: has no effect if menu_driver = rgui).
# cheevos_badges_enable = false
# Take a screenshot when an achievement is triggered.
# cheevos_auto_screenshot = false
# Besides achievements, some games also have leaderboards, where you can
# compete for high-scores, speedruns, etc.
# cheevos_leaderboards_enable = false
# Show an on-screen indicator when attempting challenging achievements
# to provide feedback when the attempt has failed (for achievements that
# support it)
# cheevos_challenge_indicators = true
# Send some messages to the RetroAchievements.org saying, for example,
# where you are in the game, how many lives you have, your score, etc.
# cheevos_richpresence_enable = true
# Even after unlocking achievements in previous sessions, you may still want
# to see them triggering in the current session.
# cheevos_start_active = false
# Unnoficial achievements are used only for achievement creators and testers.
# cheevos_test_unofficial = false
#### Misc
# Enable rewinding. This will take a performance hit when playing, so it is disabled by default.
# rewind_enable = false
# Rewinding buffer size in megabytes. Bigger rewinding buffer means you can rewind longer.
# The buffer should be approx. 20MB per minute of buffer time.
# rewind_buffer_size = 20
# Rewind granularity. When rewinding defined number of frames, you can rewind several frames at a time, increasing the rewinding speed.
# rewind_granularity = 1
# Pause gameplay when window focus is lost.
# pause_nonactive = true
# Autosaves the non-volatile SRAM at a regular interval. This is disabled by default unless set otherwise.
# The interval is measured in seconds. A value of 0 disables autosave.
# autosave_interval =
# Records video after CPU video filter.
# video_post_filter_record = false
# Records output of GPU shaded material if available.
# video_gpu_record = false
# Screenshots output of GPU shaded material if available.
# video_gpu_screenshot = true
# Watch content shader files for changes and auto-apply as necessary.
# video_shader_watch_files = false
# Block SRAM from being overwritten when loading save states.
# Might potentially lead to buggy games.
# block_sram_overwrite = false
# When saving a savestate, save state index is automatically increased before
# it is saved.
# Also, when loading content, the index will be set to the highest existing index.
# There is no upper bound on the index.
# savestate_auto_index = false
# Slowmotion ratio. When slowmotion, content will slow down by factor.
# slowmotion_ratio = 3.0
# The maximum rate at which content will be run when using fast forward. (E.g. 5.0 for 60 fps content => 300 fps cap).
# RetroArch will go to sleep to ensure that the maximum rate will not be exceeded.
# Do not rely on this cap to be perfectly accurate.
# If this is set at 0, then fastforward ratio is unlimited (no FPS cap)
# fastforward_ratio = 0.0
# Enable stdin/network command interface.
# network_cmd_enable = false
# network_cmd_port = 55355
# stdin_cmd_enable = false
# Enable Sustained Performance Mode in Android 7.0+
# sustained_performance_mode = true
# File format to use when writing playlists to disk
# playlist_use_old_format = false
# Keep track of how long each core+content has been running for over time
# content_runtime_log = false
# vibrate_on_keypress = false
# Enable device vibration for supported cores
# enable_device_vibration = false
# Enable game mode on supported platforms.
# Depending on the system, it can result in more stable frame times, less audio
# crackling, better performance and lower latency. On Linux, Feral GameMode
# needs to be installed (https://github.com/FeralInteractive/gamemode).
#
# gamemode_enable = true