diff --git a/Makefile.common b/Makefile.common index 1635c35..bf5d334 100644 --- a/Makefile.common +++ b/Makefile.common @@ -40,8 +40,7 @@ ZLIB_SOURCES_C = \ $(DEPS_DIR)/zlib-1.2.11/crc32.c \ $(DEPS_DIR)/zlib-1.2.11/inffast.c \ $(DEPS_DIR)/zlib-1.2.11/inflate.c \ - $(DEPS_DIR)/zlib-1.2.11/inftrees.c \ - $(DEPS_DIR)/zlib-1.2.11/zutil.c + $(DEPS_DIR)/zlib-1.2.11/inftrees.c ifneq (,$(findstring msvc2003,$(platform))) INCFLAGS += -I$(LIBRETRO_COMM_DIR)/include/compat/msvc diff --git a/deps/zlib-1.2.11/CMakeLists.txt b/deps/zlib-1.2.11/CMakeLists.txt deleted file mode 100644 index 37b04b9..0000000 --- a/deps/zlib-1.2.11/CMakeLists.txt +++ /dev/null @@ -1,27 +0,0 @@ -add_library(zlib STATIC - zconf.h - zlib.h - adler32.c - compress.c - crc32.c - crc32.h - deflate.c - deflate.h - gzguts.h - infback.c - inffast.c - inffast.h - inffixed.h - inflate.c - inflate.h - inftrees.c - inftrees.h - trees.c - trees.h - uncompr.c - zutil.c - zutil.h -) - -target_include_directories(zlib PRIVATE "${CMAKE_CURRENT_SOURCE_DIR}") -target_include_directories(zlib INTERFACE "${CMAKE_CURRENT_SOURCE_DIR}") diff --git a/deps/zlib-1.2.11/ChangeLog b/deps/zlib-1.2.11/ChangeLog deleted file mode 100644 index 30199a6..0000000 --- a/deps/zlib-1.2.11/ChangeLog +++ /dev/null @@ -1,1515 +0,0 @@ - - ChangeLog file for zlib - -Changes in 1.2.11 (15 Jan 2017) -- Fix deflate stored bug when pulling last block from window -- Permit immediate deflateParams changes before any deflate input - -Changes in 1.2.10 (2 Jan 2017) -- Avoid warnings on snprintf() return value -- Fix bug in deflate_stored() for zero-length input -- Fix bug in gzwrite.c that produced corrupt gzip files -- Remove files to be installed before copying them in Makefile.in -- Add warnings when compiling with assembler code - -Changes in 1.2.9 (31 Dec 2016) -- Fix contrib/minizip to permit unzipping with desktop API [Zouzou] -- Improve contrib/blast to return unused bytes -- Assure that gzoffset() is correct when appending -- Improve compress() and uncompress() to support large lengths -- Fix bug in test/example.c where error code not saved -- Remedy Coverity warning [Randers-Pehrson] -- Improve speed of gzprintf() in transparent mode -- Fix inflateInit2() bug when windowBits is 16 or 32 -- Change DEBUG macro to ZLIB_DEBUG -- Avoid uninitialized access by gzclose_w() -- Allow building zlib outside of the source directory -- Fix bug that accepted invalid zlib header when windowBits is zero -- Fix gzseek() problem on MinGW due to buggy _lseeki64 there -- Loop on write() calls in gzwrite.c in case of non-blocking I/O -- Add --warn (-w) option to ./configure for more compiler warnings -- Reject a window size of 256 bytes if not using the zlib wrapper -- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE -- Add --debug (-d) option to ./configure to define ZLIB_DEBUG -- Fix bugs in creating a very large gzip header -- Add uncompress2() function, which returns the input size used -- Assure that deflateParams() will not switch functions mid-block -- Dramatically speed up deflation for level 0 (storing) -- Add gzfread(), duplicating the interface of fread() -- Add gzfwrite(), duplicating the interface of fwrite() -- Add deflateGetDictionary() function -- Use snprintf() for later versions of Microsoft C -- Fix *Init macros to use z_ prefix when requested -- Replace as400 with os400 for OS/400 support [Monnerat] -- Add crc32_z() and adler32_z() functions with size_t lengths -- Update Visual Studio project files [AraHaan] - -Changes in 1.2.8 (28 Apr 2013) -- Update contrib/minizip/iowin32.c for Windows RT [Vollant] -- Do not force Z_CONST for C++ -- Clean up contrib/vstudio [Roß] -- Correct spelling error in zlib.h -- Fix mixed line endings in contrib/vstudio - -Changes in 1.2.7.3 (13 Apr 2013) -- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc - -Changes in 1.2.7.2 (13 Apr 2013) -- Change check for a four-byte type back to hexadecimal -- Fix typo in win32/Makefile.msc -- Add casts in gzwrite.c for pointer differences - -Changes in 1.2.7.1 (24 Mar 2013) -- Replace use of unsafe string functions with snprintf if available -- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink] -- Fix gzgetc undefine when Z_PREFIX set [Turk] -- Eliminate use of mktemp in Makefile (not always available) -- Fix bug in 'F' mode for gzopen() -- Add inflateGetDictionary() function -- Correct comment in deflate.h -- Use _snprintf for snprintf in Microsoft C -- On Darwin, only use /usr/bin/libtool if libtool is not Apple -- Delete "--version" file if created by "ar --version" [Richard G.] -- Fix configure check for veracity of compiler error return codes -- Fix CMake compilation of static lib for MSVC2010 x64 -- Remove unused variable in infback9.c -- Fix argument checks in gzlog_compress() and gzlog_write() -- Clean up the usage of z_const and respect const usage within zlib -- Clean up examples/gzlog.[ch] comparisons of different types -- Avoid shift equal to bits in type (caused endless loop) -- Fix uninitialized value bug in gzputc() introduced by const patches -- Fix memory allocation error in examples/zran.c [Nor] -- Fix bug where gzopen(), gzclose() would write an empty file -- Fix bug in gzclose() when gzwrite() runs out of memory -- Check for input buffer malloc failure in examples/gzappend.c -- Add note to contrib/blast to use binary mode in stdio -- Fix comparisons of differently signed integers in contrib/blast -- Check for invalid code length codes in contrib/puff -- Fix serious but very rare decompression bug in inftrees.c -- Update inflateBack() comments, since inflate() can be faster -- Use underscored I/O function names for WINAPI_FAMILY -- Add _tr_flush_bits to the external symbols prefixed by --zprefix -- Add contrib/vstudio/vc10 pre-build step for static only -- Quote --version-script argument in CMakeLists.txt -- Don't specify --version-script on Apple platforms in CMakeLists.txt -- Fix casting error in contrib/testzlib/testzlib.c -- Fix types in contrib/minizip to match result of get_crc_table() -- Simplify contrib/vstudio/vc10 with 'd' suffix -- Add TOP support to win32/Makefile.msc -- Suport i686 and amd64 assembler builds in CMakeLists.txt -- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h -- Add vc11 and vc12 build files to contrib/vstudio -- Add gzvprintf() as an undocumented function in zlib -- Fix configure for Sun shell -- Remove runtime check in configure for four-byte integer type -- Add casts and consts to ease user conversion to C++ -- Add man pages for minizip and miniunzip -- In Makefile uninstall, don't rm if preceding cd fails -- Do not return Z_BUF_ERROR if deflateParam() has nothing to write - -Changes in 1.2.7 (2 May 2012) -- Replace use of memmove() with a simple copy for portability -- Test for existence of strerror -- Restore gzgetc_ for backward compatibility with 1.2.6 -- Fix build with non-GNU make on Solaris -- Require gcc 4.0 or later on Mac OS X to use the hidden attribute -- Include unistd.h for Watcom C -- Use __WATCOMC__ instead of __WATCOM__ -- Do not use the visibility attribute if NO_VIZ defined -- Improve the detection of no hidden visibility attribute -- Avoid using __int64 for gcc or solo compilation -- Cast to char * in gzprintf to avoid warnings [Zinser] -- Fix make_vms.com for VAX [Zinser] -- Don't use library or built-in byte swaps -- Simplify test and use of gcc hidden attribute -- Fix bug in gzclose_w() when gzwrite() fails to allocate memory -- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen() -- Fix bug in test/minigzip.c for configure --solo -- Fix contrib/vstudio project link errors [Mohanathas] -- Add ability to choose the builder in make_vms.com [Schweda] -- Add DESTDIR support to mingw32 win32/Makefile.gcc -- Fix comments in win32/Makefile.gcc for proper usage -- Allow overriding the default install locations for cmake -- Generate and install the pkg-config file with cmake -- Build both a static and a shared version of zlib with cmake -- Include version symbols for cmake builds -- If using cmake with MSVC, add the source directory to the includes -- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta] -- Move obsolete emx makefile to old [Truta] -- Allow the use of -Wundef when compiling or using zlib -- Avoid the use of the -u option with mktemp -- Improve inflate() documentation on the use of Z_FINISH -- Recognize clang as gcc -- Add gzopen_w() in Windows for wide character path names -- Rename zconf.h in CMakeLists.txt to move it out of the way -- Add source directory in CMakeLists.txt for building examples -- Look in build directory for zlib.pc in CMakeLists.txt -- Remove gzflags from zlibvc.def in vc9 and vc10 -- Fix contrib/minizip compilation in the MinGW environment -- Update ./configure for Solaris, support --64 [Mooney] -- Remove -R. from Solaris shared build (possible security issue) -- Avoid race condition for parallel make (-j) running example -- Fix type mismatch between get_crc_table() and crc_table -- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler] -- Fix the path to zlib.map in CMakeLists.txt -- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe] -- Add instructions to win32/Makefile.gcc for shared install [Torri] - -Changes in 1.2.6.1 (12 Feb 2012) -- Avoid the use of the Objective-C reserved name "id" -- Include io.h in gzguts.h for Microsoft compilers -- Fix problem with ./configure --prefix and gzgetc macro -- Include gz_header definition when compiling zlib solo -- Put gzflags() functionality back in zutil.c -- Avoid library header include in crc32.c for Z_SOLO -- Use name in GCC_CLASSIC as C compiler for coverage testing, if set -- Minor cleanup in contrib/minizip/zip.c [Vollant] -- Update make_vms.com [Zinser] -- Remove unnecessary gzgetc_ function -- Use optimized byte swap operations for Microsoft and GNU [Snyder] -- Fix minor typo in zlib.h comments [Rzesniowiecki] - -Changes in 1.2.6 (29 Jan 2012) -- Update the Pascal interface in contrib/pascal -- Fix function numbers for gzgetc_ in zlibvc.def files -- Fix configure.ac for contrib/minizip [Schiffer] -- Fix large-entry detection in minizip on 64-bit systems [Schiffer] -- Have ./configure use the compiler return code for error indication -- Fix CMakeLists.txt for cross compilation [McClure] -- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes] -- Fix compilation of contrib/minizip on FreeBSD [Marquez] -- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath] -- Include io.h for Turbo C / Borland C on all platforms [Truta] -- Make version explicit in contrib/minizip/configure.ac [Bosmans] -- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant] -- Minor cleanup up contrib/minizip/unzip.c [Vollant] -- Fix bug when compiling minizip with C++ [Vollant] -- Protect for long name and extra fields in contrib/minizip [Vollant] -- Avoid some warnings in contrib/minizip [Vollant] -- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip -- Add missing libs to minizip linker command -- Add support for VPATH builds in contrib/minizip -- Add an --enable-demos option to contrib/minizip/configure -- Add the generation of configure.log by ./configure -- Exit when required parameters not provided to win32/Makefile.gcc -- Have gzputc return the character written instead of the argument -- Use the -m option on ldconfig for BSD systems [Tobias] -- Correct in zlib.map when deflateResetKeep was added - -Changes in 1.2.5.3 (15 Jan 2012) -- Restore gzgetc function for binary compatibility -- Do not use _lseeki64 under Borland C++ [Truta] -- Update win32/Makefile.msc to build test/*.c [Truta] -- Remove old/visualc6 given CMakefile and other alternatives -- Update AS400 build files and documentation [Monnerat] -- Update win32/Makefile.gcc to build test/*.c [Truta] -- Permit stronger flushes after Z_BLOCK flushes -- Avoid extraneous empty blocks when doing empty flushes -- Permit Z_NULL arguments to deflatePending -- Allow deflatePrime() to insert bits in the middle of a stream -- Remove second empty static block for Z_PARTIAL_FLUSH -- Write out all of the available bits when using Z_BLOCK -- Insert the first two strings in the hash table after a flush - -Changes in 1.2.5.2 (17 Dec 2011) -- fix ld error: unable to find version dependency 'ZLIB_1.2.5' -- use relative symlinks for shared libs -- Avoid searching past window for Z_RLE strategy -- Assure that high-water mark initialization is always applied in deflate -- Add assertions to fill_window() in deflate.c to match comments -- Update python link in README -- Correct spelling error in gzread.c -- Fix bug in gzgets() for a concatenated empty gzip stream -- Correct error in comment for gz_make() -- Change gzread() and related to ignore junk after gzip streams -- Allow gzread() and related to continue after gzclearerr() -- Allow gzrewind() and gzseek() after a premature end-of-file -- Simplify gzseek() now that raw after gzip is ignored -- Change gzgetc() to a macro for speed (~40% speedup in testing) -- Fix gzclose() to return the actual error last encountered -- Always add large file support for windows -- Include zconf.h for windows large file support -- Include zconf.h.cmakein for windows large file support -- Update zconf.h.cmakein on make distclean -- Merge vestigial vsnprintf determination from zutil.h to gzguts.h -- Clarify how gzopen() appends in zlib.h comments -- Correct documentation of gzdirect() since junk at end now ignored -- Add a transparent write mode to gzopen() when 'T' is in the mode -- Update python link in zlib man page -- Get inffixed.h and MAKEFIXED result to match -- Add a ./config --solo option to make zlib subset with no library use -- Add undocumented inflateResetKeep() function for CAB file decoding -- Add --cover option to ./configure for gcc coverage testing -- Add #define ZLIB_CONST option to use const in the z_stream interface -- Add comment to gzdopen() in zlib.h to use dup() when using fileno() -- Note behavior of uncompress() to provide as much data as it can -- Add files in contrib/minizip to aid in building libminizip -- Split off AR options in Makefile.in and configure -- Change ON macro to Z_ARG to avoid application conflicts -- Facilitate compilation with Borland C++ for pragmas and vsnprintf -- Include io.h for Turbo C / Borland C++ -- Move example.c and minigzip.c to test/ -- Simplify incomplete code table filling in inflate_table() -- Remove code from inflate.c and infback.c that is impossible to execute -- Test the inflate code with full coverage -- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw) -- Add deflateResetKeep and fix inflateResetKeep to retain dictionary -- Fix gzwrite.c to accommodate reduced memory zlib compilation -- Have inflate() with Z_FINISH avoid the allocation of a window -- Do not set strm->adler when doing raw inflate -- Fix gzeof() to behave just like feof() when read is not past end of file -- Fix bug in gzread.c when end-of-file is reached -- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF -- Document gzread() capability to read concurrently written files -- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo] - -Changes in 1.2.5.1 (10 Sep 2011) -- Update FAQ entry on shared builds (#13) -- Avoid symbolic argument to chmod in Makefile.in -- Fix bug and add consts in contrib/puff [Oberhumer] -- Update contrib/puff/zeros.raw test file to have all block types -- Add full coverage test for puff in contrib/puff/Makefile -- Fix static-only-build install in Makefile.in -- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno] -- Add libz.a dependency to shared in Makefile.in for parallel builds -- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out -- Replace $(...) with `...` in configure for non-bash sh [Bowler] -- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen] -- Add solaris* to Linux* in configure to allow gcc use [Groffen] -- Add *bsd* to Linux* case in configure [Bar-Lev] -- Add inffast.obj to dependencies in win32/Makefile.msc -- Correct spelling error in deflate.h [Kohler] -- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc -- Add test to configure for GNU C looking for gcc in output of $cc -v -- Add zlib.pc generation to win32/Makefile.gcc [Weigelt] -- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not -- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense -- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser) -- Make stronger test in zconf.h to include unistd.h for LFS -- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack] -- Fix zlib.h LFS support when Z_PREFIX used -- Add updated as400 support (removed from old) [Monnerat] -- Avoid deflate sensitivity to volatile input data -- Avoid division in adler32_combine for NO_DIVIDE -- Clarify the use of Z_FINISH with deflateBound() amount of space -- Set binary for output file in puff.c -- Use u4 type for crc_table to avoid conversion warnings -- Apply casts in zlib.h to avoid conversion warnings -- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller] -- Improve inflateSync() documentation to note indeterminancy -- Add deflatePending() function to return the amount of pending output -- Correct the spelling of "specification" in FAQ [Randers-Pehrson] -- Add a check in configure for stdarg.h, use for gzprintf() -- Check that pointers fit in ints when gzprint() compiled old style -- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler] -- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt] -- Add debug records in assmebler code [Londer] -- Update RFC references to use http://tools.ietf.org/html/... [Li] -- Add --archs option, use of libtool to configure for Mac OS X [Borstel] - -Changes in 1.2.5 (19 Apr 2010) -- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev] -- Default to libdir as sharedlibdir in configure [Nieder] -- Update copyright dates on modified source files -- Update trees.c to be able to generate modified trees.h -- Exit configure for MinGW, suggesting win32/Makefile.gcc -- Check for NULL path in gz_open [Homurlu] - -Changes in 1.2.4.5 (18 Apr 2010) -- Set sharedlibdir in configure [Torok] -- Set LDFLAGS in Makefile.in [Bar-Lev] -- Avoid mkdir objs race condition in Makefile.in [Bowler] -- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays -- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C -- Don't use hidden attribute when it is a warning generator (e.g. Solaris) - -Changes in 1.2.4.4 (18 Apr 2010) -- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok] -- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty -- Try to use bash or ksh regardless of functionality of /bin/sh -- Fix configure incompatibility with NetBSD sh -- Remove attempt to run under bash or ksh since have better NetBSD fix -- Fix win32/Makefile.gcc for MinGW [Bar-Lev] -- Add diagnostic messages when using CROSS_PREFIX in configure -- Added --sharedlibdir option to configure [Weigelt] -- Use hidden visibility attribute when available [Frysinger] - -Changes in 1.2.4.3 (10 Apr 2010) -- Only use CROSS_PREFIX in configure for ar and ranlib if they exist -- Use CROSS_PREFIX for nm [Bar-Lev] -- Assume _LARGEFILE64_SOURCE defined is equivalent to true -- Avoid use of undefined symbols in #if with && and || -- Make *64 prototypes in gzguts.h consistent with functions -- Add -shared load option for MinGW in configure [Bowler] -- Move z_off64_t to public interface, use instead of off64_t -- Remove ! from shell test in configure (not portable to Solaris) -- Change +0 macro tests to -0 for possibly increased portability - -Changes in 1.2.4.2 (9 Apr 2010) -- Add consistent carriage returns to readme.txt's in masmx86 and masmx64 -- Really provide prototypes for *64 functions when building without LFS -- Only define unlink() in minigzip.c if unistd.h not included -- Update README to point to contrib/vstudio project files -- Move projects/vc6 to old/ and remove projects/ -- Include stdlib.h in minigzip.c for setmode() definition under WinCE -- Clean up assembler builds in win32/Makefile.msc [Rowe] -- Include sys/types.h for Microsoft for off_t definition -- Fix memory leak on error in gz_open() -- Symbolize nm as $NM in configure [Weigelt] -- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt] -- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined -- Fix bug in gzeof() to take into account unused input data -- Avoid initialization of structures with variables in puff.c -- Updated win32/README-WIN32.txt [Rowe] - -Changes in 1.2.4.1 (28 Mar 2010) -- Remove the use of [a-z] constructs for sed in configure [gentoo 310225] -- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech] -- Restore "for debugging" comment on sprintf() in gzlib.c -- Remove fdopen for MVS from gzguts.h -- Put new README-WIN32.txt in win32 [Rowe] -- Add check for shell to configure and invoke another shell if needed -- Fix big fat stinking bug in gzseek() on uncompressed files -- Remove vestigial F_OPEN64 define in zutil.h -- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE -- Avoid errors on non-LFS systems when applications define LFS macros -- Set EXE to ".exe" in configure for MINGW [Kahle] -- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill] -- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev] -- Add DLL install in win32/makefile.gcc [Bar-Lev] -- Allow Linux* or linux* from uname in configure [Bar-Lev] -- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev] -- Add cross-compilation prefixes to configure [Bar-Lev] -- Match type exactly in gz_load() invocation in gzread.c -- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func -- Provide prototypes for *64 functions when building zlib without LFS -- Don't use -lc when linking shared library on MinGW -- Remove errno.h check in configure and vestigial errno code in zutil.h - -Changes in 1.2.4 (14 Mar 2010) -- Fix VER3 extraction in configure for no fourth subversion -- Update zlib.3, add docs to Makefile.in to make .pdf out of it -- Add zlib.3.pdf to distribution -- Don't set error code in gzerror() if passed pointer is NULL -- Apply destination directory fixes to CMakeLists.txt [Lowman] -- Move #cmakedefine's to a new zconf.in.cmakein -- Restore zconf.h for builds that don't use configure or cmake -- Add distclean to dummy Makefile for convenience -- Update and improve INDEX, README, and FAQ -- Update CMakeLists.txt for the return of zconf.h [Lowman] -- Update contrib/vstudio/vc9 and vc10 [Vollant] -- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc -- Apply license and readme changes to contrib/asm686 [Raiter] -- Check file name lengths and add -c option in minigzip.c [Li] -- Update contrib/amd64 and contrib/masmx86/ [Vollant] -- Avoid use of "eof" parameter in trees.c to not shadow library variable -- Update make_vms.com for removal of zlibdefs.h [Zinser] -- Update assembler code and vstudio projects in contrib [Vollant] -- Remove outdated assembler code contrib/masm686 and contrib/asm586 -- Remove old vc7 and vc8 from contrib/vstudio -- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe] -- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open() -- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant] -- Remove *64 functions from win32/zlib.def (they're not 64-bit yet) -- Fix bug in void-returning vsprintf() case in gzwrite.c -- Fix name change from inflate.h in contrib/inflate86/inffas86.c -- Check if temporary file exists before removing in make_vms.com [Zinser] -- Fix make install and uninstall for --static option -- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta] -- Update readme.txt in contrib/masmx64 and masmx86 to assemble - -Changes in 1.2.3.9 (21 Feb 2010) -- Expunge gzio.c -- Move as400 build information to old -- Fix updates in contrib/minizip and contrib/vstudio -- Add const to vsnprintf test in configure to avoid warnings [Weigelt] -- Delete zconf.h (made by configure) [Weigelt] -- Change zconf.in.h to zconf.h.in per convention [Weigelt] -- Check for NULL buf in gzgets() -- Return empty string for gzgets() with len == 1 (like fgets()) -- Fix description of gzgets() in zlib.h for end-of-file, NULL return -- Update minizip to 1.1 [Vollant] -- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c -- Note in zlib.h that gzerror() should be used to distinguish from EOF -- Remove use of snprintf() from gzlib.c -- Fix bug in gzseek() -- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant] -- Fix zconf.h generation in CMakeLists.txt [Lowman] -- Improve comments in zconf.h where modified by configure - -Changes in 1.2.3.8 (13 Feb 2010) -- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer] -- Use z_off64_t in gz_zero() and gz_skip() to match state->skip -- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t) -- Revert to Makefile.in from 1.2.3.6 (live with the clutter) -- Fix missing error return in gzflush(), add zlib.h note -- Add *64 functions to zlib.map [Levin] -- Fix signed/unsigned comparison in gz_comp() -- Use SFLAGS when testing shared linking in configure -- Add --64 option to ./configure to use -m64 with gcc -- Fix ./configure --help to correctly name options -- Have make fail if a test fails [Levin] -- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson] -- Remove assembler object files from contrib - -Changes in 1.2.3.7 (24 Jan 2010) -- Always gzopen() with O_LARGEFILE if available -- Fix gzdirect() to work immediately after gzopen() or gzdopen() -- Make gzdirect() more precise when the state changes while reading -- Improve zlib.h documentation in many places -- Catch memory allocation failure in gz_open() -- Complete close operation if seek forward in gzclose_w() fails -- Return Z_ERRNO from gzclose_r() if close() fails -- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL -- Return zero for gzwrite() errors to match zlib.h description -- Return -1 on gzputs() error to match zlib.h description -- Add zconf.in.h to allow recovery from configure modification [Weigelt] -- Fix static library permissions in Makefile.in [Weigelt] -- Avoid warnings in configure tests that hide functionality [Weigelt] -- Add *BSD and DragonFly to Linux case in configure [gentoo 123571] -- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212] -- Avoid access of uninitialized data for first inflateReset2 call [Gomes] -- Keep object files in subdirectories to reduce the clutter somewhat -- Remove default Makefile and zlibdefs.h, add dummy Makefile -- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_ -- Remove zlibdefs.h completely -- modify zconf.h instead - -Changes in 1.2.3.6 (17 Jan 2010) -- Avoid void * arithmetic in gzread.c and gzwrite.c -- Make compilers happier with const char * for gz_error message -- Avoid unused parameter warning in inflate.c -- Avoid signed-unsigned comparison warning in inflate.c -- Indent #pragma's for traditional C -- Fix usage of strwinerror() in glib.c, change to gz_strwinerror() -- Correct email address in configure for system options -- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser] -- Update zlib.map [Brown] -- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok] -- Apply various fixes to CMakeLists.txt [Lowman] -- Add checks on len in gzread() and gzwrite() -- Add error message for no more room for gzungetc() -- Remove zlib version check in gzwrite() -- Defer compression of gzprintf() result until need to -- Use snprintf() in gzdopen() if available -- Remove USE_MMAP configuration determination (only used by minigzip) -- Remove examples/pigz.c (available separately) -- Update examples/gun.c to 1.6 - -Changes in 1.2.3.5 (8 Jan 2010) -- Add space after #if in zutil.h for some compilers -- Fix relatively harmless bug in deflate_fast() [Exarevsky] -- Fix same problem in deflate_slow() -- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown] -- Add deflate_rle() for faster Z_RLE strategy run-length encoding -- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding -- Change name of "write" variable in inffast.c to avoid library collisions -- Fix premature EOF from gzread() in gzio.c [Brown] -- Use zlib header window size if windowBits is 0 in inflateInit2() -- Remove compressBound() call in deflate.c to avoid linking compress.o -- Replace use of errno in gz* with functions, support WinCE [Alves] -- Provide alternative to perror() in minigzip.c for WinCE [Alves] -- Don't use _vsnprintf on later versions of MSVC [Lowman] -- Add CMake build script and input file [Lowman] -- Update contrib/minizip to 1.1 [Svensson, Vollant] -- Moved nintendods directory from contrib to . -- Replace gzio.c with a new set of routines with the same functionality -- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above -- Update contrib/minizip to 1.1b -- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h - -Changes in 1.2.3.4 (21 Dec 2009) -- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility -- Update comments in configure and Makefile.in for default --shared -- Fix test -z's in configure [Marquess] -- Build examplesh and minigzipsh when not testing -- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h -- Import LDFLAGS from the environment in configure -- Fix configure to populate SFLAGS with discovered CFLAGS options -- Adapt make_vms.com to the new Makefile.in [Zinser] -- Add zlib2ansi script for C++ compilation [Marquess] -- Add _FILE_OFFSET_BITS=64 test to make test (when applicable) -- Add AMD64 assembler code for longest match to contrib [Teterin] -- Include options from $SFLAGS when doing $LDSHARED -- Simplify 64-bit file support by introducing z_off64_t type -- Make shared object files in objs directory to work around old Sun cc -- Use only three-part version number for Darwin shared compiles -- Add rc option to ar in Makefile.in for when ./configure not run -- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4* -- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile -- Protect against _FILE_OFFSET_BITS being defined when compiling zlib -- Rename Makefile.in targets allstatic to static and allshared to shared -- Fix static and shared Makefile.in targets to be independent -- Correct error return bug in gz_open() by setting state [Brown] -- Put spaces before ;;'s in configure for better sh compatibility -- Add pigz.c (parallel implementation of gzip) to examples/ -- Correct constant in crc32.c to UL [Leventhal] -- Reject negative lengths in crc32_combine() -- Add inflateReset2() function to work like inflateEnd()/inflateInit2() -- Include sys/types.h for _LARGEFILE64_SOURCE [Brown] -- Correct typo in doc/algorithm.txt [Janik] -- Fix bug in adler32_combine() [Zhu] -- Catch missing-end-of-block-code error in all inflates and in puff - Assures that random input to inflate eventually results in an error -- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/ -- Update ENOUGH and its usage to reflect discovered bounds -- Fix gzerror() error report on empty input file [Brown] -- Add ush casts in trees.c to avoid pedantic runtime errors -- Fix typo in zlib.h uncompress() description [Reiss] -- Correct inflate() comments with regard to automatic header detection -- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays) -- Put new version of gzlog (2.0) in examples with interruption recovery -- Add puff compile option to permit invalid distance-too-far streams -- Add puff TEST command options, ability to read piped input -- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but - _LARGEFILE64_SOURCE not defined -- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart -- Fix deflateSetDictionary() to use all 32K for output consistency -- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h) -- Clear bytes after deflate lookahead to avoid use of uninitialized data -- Change a limit in inftrees.c to be more transparent to Coverity Prevent -- Update win32/zlib.def with exported symbols from zlib.h -- Correct spelling errors in zlib.h [Willem, Sobrado] -- Allow Z_BLOCK for deflate() to force a new block -- Allow negative bits in inflatePrime() to delete existing bit buffer -- Add Z_TREES flush option to inflate() to return at end of trees -- Add inflateMark() to return current state information for random access -- Add Makefile for NintendoDS to contrib [Costa] -- Add -w in configure compile tests to avoid spurious warnings [Beucler] -- Fix typos in zlib.h comments for deflateSetDictionary() -- Fix EOF detection in transparent gzread() [Maier] - -Changes in 1.2.3.3 (2 October 2006) -- Make --shared the default for configure, add a --static option -- Add compile option to permit invalid distance-too-far streams -- Add inflateUndermine() function which is required to enable above -- Remove use of "this" variable name for C++ compatibility [Marquess] -- Add testing of shared library in make test, if shared library built -- Use ftello() and fseeko() if available instead of ftell() and fseek() -- Provide two versions of all functions that use the z_off_t type for - binary compatibility -- a normal version and a 64-bit offset version, - per the Large File Support Extension when _LARGEFILE64_SOURCE is - defined; use the 64-bit versions by default when _FILE_OFFSET_BITS - is defined to be 64 -- Add a --uname= option to configure to perhaps help with cross-compiling - -Changes in 1.2.3.2 (3 September 2006) -- Turn off silly Borland warnings [Hay] -- Use off64_t and define _LARGEFILE64_SOURCE when present -- Fix missing dependency on inffixed.h in Makefile.in -- Rig configure --shared to build both shared and static [Teredesai, Truta] -- Remove zconf.in.h and instead create a new zlibdefs.h file -- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant] -- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt] - -Changes in 1.2.3.1 (16 August 2006) -- Add watcom directory with OpenWatcom make files [Daniel] -- Remove #undef of FAR in zconf.in.h for MVS [Fedtke] -- Update make_vms.com [Zinser] -- Use -fPIC for shared build in configure [Teredesai, Nicholson] -- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen] -- Use fdopen() (not _fdopen()) for Interix in zutil.h [Bäck] -- Add some FAQ entries about the contrib directory -- Update the MVS question in the FAQ -- Avoid extraneous reads after EOF in gzio.c [Brown] -- Correct spelling of "successfully" in gzio.c [Randers-Pehrson] -- Add comments to zlib.h about gzerror() usage [Brown] -- Set extra flags in gzip header in gzopen() like deflate() does -- Make configure options more compatible with double-dash conventions - [Weigelt] -- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen] -- Fix uninstall target in Makefile.in [Truta] -- Add pkgconfig support [Weigelt] -- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt] -- Replace set_data_type() with a more accurate detect_data_type() in - trees.c, according to the txtvsbin.txt document [Truta] -- Swap the order of #include and #include "zlib.h" in - gzio.c, example.c and minigzip.c [Truta] -- Shut up annoying VS2005 warnings about standard C deprecation [Rowe, - Truta] (where?) -- Fix target "clean" from win32/Makefile.bor [Truta] -- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe] -- Update zlib www home address in win32/DLL_FAQ.txt [Truta] -- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove] -- Enable browse info in the "Debug" and "ASM Debug" configurations in - the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta] -- Add pkgconfig support [Weigelt] -- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h, - for use in win32/zlib1.rc [Polushin, Rowe, Truta] -- Add a document that explains the new text detection scheme to - doc/txtvsbin.txt [Truta] -- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta] -- Move algorithm.txt into doc/ [Truta] -- Synchronize FAQ with website -- Fix compressBound(), was low for some pathological cases [Fearnley] -- Take into account wrapper variations in deflateBound() -- Set examples/zpipe.c input and output to binary mode for Windows -- Update examples/zlib_how.html with new zpipe.c (also web site) -- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems - that gcc became pickier in 4.0) -- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain - un-versioned, the patch adds versioning only for symbols introduced in - zlib-1.2.0 or later. It also declares as local those symbols which are - not designed to be exported." [Levin] -- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure -- Do not initialize global static by default in trees.c, add a response - NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess] -- Don't use strerror() in gzio.c under WinCE [Yakimov] -- Don't use errno.h in zutil.h under WinCE [Yakimov] -- Move arguments for AR to its usage to allow replacing ar [Marot] -- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson] -- Improve inflateInit() and inflateInit2() documentation -- Fix structure size comment in inflate.h -- Change configure help option from --h* to --help [Santos] - -Changes in 1.2.3 (18 July 2005) -- Apply security vulnerability fixes to contrib/infback9 as well -- Clean up some text files (carriage returns, trailing space) -- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] - -Changes in 1.2.2.4 (11 July 2005) -- Add inflatePrime() function for starting inflation at bit boundary -- Avoid some Visual C warnings in deflate.c -- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit - compile -- Fix some spelling errors in comments [Betts] -- Correct inflateInit2() error return documentation in zlib.h -- Add zran.c example of compressed data random access to examples - directory, shows use of inflatePrime() -- Fix cast for assignments to strm->state in inflate.c and infback.c -- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] -- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] -- Add cast in trees.c t avoid a warning [Oberhumer] -- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] -- Update make_vms.com [Zinser] -- Initialize state->write in inflateReset() since copied in inflate_fast() -- Be more strict on incomplete code sets in inflate_table() and increase - ENOUGH and MAXD -- this repairs a possible security vulnerability for - invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for - discovering the vulnerability and providing test cases. -- Add ia64 support to configure for HP-UX [Smith] -- Add error return to gzread() for format or i/o error [Levin] -- Use malloc.h for OS/2 [Necasek] - -Changes in 1.2.2.3 (27 May 2005) -- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile -- Typecast fread() return values in gzio.c [Vollant] -- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) -- Fix crc check bug in gzread() after gzungetc() [Heiner] -- Add the deflateTune() function to adjust internal compression parameters -- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) -- Remove an incorrect assertion in examples/zpipe.c -- Add C++ wrapper in infback9.h [Donais] -- Fix bug in inflateCopy() when decoding fixed codes -- Note in zlib.h how much deflateSetDictionary() actually uses -- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) -- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] -- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] -- Add gzdirect() function to indicate transparent reads -- Update contrib/minizip [Vollant] -- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] -- Add casts in crc32.c to avoid warnings [Oberhumer] -- Add contrib/masmx64 [Vollant] -- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] - -Changes in 1.2.2.2 (30 December 2004) -- Replace structure assignments in deflate.c and inflate.c with zmemcpy to - avoid implicit memcpy calls (portability for no-library compilation) -- Increase sprintf() buffer size in gzdopen() to allow for large numbers -- Add INFLATE_STRICT to check distances against zlib header -- Improve WinCE errno handling and comments [Chang] -- Remove comment about no gzip header processing in FAQ -- Add Z_FIXED strategy option to deflateInit2() to force fixed trees -- Add updated make_vms.com [Coghlan], update README -- Create a new "examples" directory, move gzappend.c there, add zpipe.c, - fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. -- Add FAQ entry and comments in deflate.c on uninitialized memory access -- Add Solaris 9 make options in configure [Gilbert] -- Allow strerror() usage in gzio.c for STDC -- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] -- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] -- Use z_off_t for adler32_combine() and crc32_combine() lengths -- Make adler32() much faster for small len -- Use OS_CODE in deflate() default gzip header - -Changes in 1.2.2.1 (31 October 2004) -- Allow inflateSetDictionary() call for raw inflate -- Fix inflate header crc check bug for file names and comments -- Add deflateSetHeader() and gz_header structure for custom gzip headers -- Add inflateGetheader() to retrieve gzip headers -- Add crc32_combine() and adler32_combine() functions -- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list -- Use zstreamp consistently in zlib.h (inflate_back functions) -- Remove GUNZIP condition from definition of inflate_mode in inflate.h - and in contrib/inflate86/inffast.S [Truta, Anderson] -- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] -- Update projects/README.projects and projects/visualc6 [Truta] -- Update win32/DLL_FAQ.txt [Truta] -- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] -- Deprecate Z_ASCII; use Z_TEXT instead [Truta] -- Use a new algorithm for setting strm->data_type in trees.c [Truta] -- Do not define an exit() prototype in zutil.c unless DEBUG defined -- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] -- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() -- Fix Darwin build version identification [Peterson] - -Changes in 1.2.2 (3 October 2004) -- Update zlib.h comments on gzip in-memory processing -- Set adler to 1 in inflateReset() to support Java test suite [Walles] -- Add contrib/dotzlib [Ravn] -- Update win32/DLL_FAQ.txt [Truta] -- Update contrib/minizip [Vollant] -- Move contrib/visual-basic.txt to old/ [Truta] -- Fix assembler builds in projects/visualc6/ [Truta] - -Changes in 1.2.1.2 (9 September 2004) -- Update INDEX file -- Fix trees.c to update strm->data_type (no one ever noticed!) -- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] -- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) -- Add limited multitasking protection to DYNAMIC_CRC_TABLE -- Add NO_vsnprintf for VMS in zutil.h [Mozilla] -- Don't declare strerror() under VMS [Mozilla] -- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize -- Update contrib/ada [Anisimkov] -- Update contrib/minizip [Vollant] -- Fix configure to not hardcode directories for Darwin [Peterson] -- Fix gzio.c to not return error on empty files [Brown] -- Fix indentation; update version in contrib/delphi/ZLib.pas and - contrib/pascal/zlibpas.pas [Truta] -- Update mkasm.bat in contrib/masmx86 [Truta] -- Update contrib/untgz [Truta] -- Add projects/README.projects [Truta] -- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] -- Update win32/DLL_FAQ.txt [Truta] -- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] -- Remove an unnecessary assignment to curr in inftrees.c [Truta] -- Add OS/2 to exe builds in configure [Poltorak] -- Remove err dummy parameter in zlib.h [Kientzle] - -Changes in 1.2.1.1 (9 January 2004) -- Update email address in README -- Several FAQ updates -- Fix a big fat bug in inftrees.c that prevented decoding valid - dynamic blocks with only literals and no distance codes -- - Thanks to "Hot Emu" for the bug report and sample file -- Add a note to puff.c on no distance codes case. - -Changes in 1.2.1 (17 November 2003) -- Remove a tab in contrib/gzappend/gzappend.c -- Update some interfaces in contrib for new zlib functions -- Update zlib version number in some contrib entries -- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta] -- Support shared libraries on Hurd and KFreeBSD [Brown] -- Fix error in NO_DIVIDE option of adler32.c - -Changes in 1.2.0.8 (4 November 2003) -- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas -- Add experimental NO_DIVIDE #define in adler32.c - - Possibly faster on some processors (let me know if it is) -- Correct Z_BLOCK to not return on first inflate call if no wrap -- Fix strm->data_type on inflate() return to correctly indicate EOB -- Add deflatePrime() function for appending in the middle of a byte -- Add contrib/gzappend for an example of appending to a stream -- Update win32/DLL_FAQ.txt [Truta] -- Delete Turbo C comment in README [Truta] -- Improve some indentation in zconf.h [Truta] -- Fix infinite loop on bad input in configure script [Church] -- Fix gzeof() for concatenated gzip files [Johnson] -- Add example to contrib/visual-basic.txt [Michael B.] -- Add -p to mkdir's in Makefile.in [vda] -- Fix configure to properly detect presence or lack of printf functions -- Add AS400 support [Monnerat] -- Add a little Cygwin support [Wilson] - -Changes in 1.2.0.7 (21 September 2003) -- Correct some debug formats in contrib/infback9 -- Cast a type in a debug statement in trees.c -- Change search and replace delimiter in configure from % to # [Beebe] -- Update contrib/untgz to 0.2 with various fixes [Truta] -- Add build support for Amiga [Nikl] -- Remove some directories in old that have been updated to 1.2 -- Add dylib building for Mac OS X in configure and Makefile.in -- Remove old distribution stuff from Makefile -- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X -- Update links in README - -Changes in 1.2.0.6 (13 September 2003) -- Minor FAQ updates -- Update contrib/minizip to 1.00 [Vollant] -- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta] -- Update POSTINC comment for 68060 [Nikl] -- Add contrib/infback9 with deflate64 decoding (unsupported) -- For MVS define NO_vsnprintf and undefine FAR [van Burik] -- Add pragma for fdopen on MVS [van Burik] - -Changes in 1.2.0.5 (8 September 2003) -- Add OF to inflateBackEnd() declaration in zlib.h -- Remember start when using gzdopen in the middle of a file -- Use internal off_t counters in gz* functions to properly handle seeks -- Perform more rigorous check for distance-too-far in inffast.c -- Add Z_BLOCK flush option to return from inflate at block boundary -- Set strm->data_type on return from inflate - - Indicate bits unused, if at block boundary, and if in last block -- Replace size_t with ptrdiff_t in crc32.c, and check for correct size -- Add condition so old NO_DEFLATE define still works for compatibility -- FAQ update regarding the Windows DLL [Truta] -- INDEX update: add qnx entry, remove aix entry [Truta] -- Install zlib.3 into mandir [Wilson] -- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta] -- Adapt the zlib interface to the new DLL convention guidelines [Truta] -- Introduce ZLIB_WINAPI macro to allow the export of functions using - the WINAPI calling convention, for Visual Basic [Vollant, Truta] -- Update msdos and win32 scripts and makefiles [Truta] -- Export symbols by name, not by ordinal, in win32/zlib.def [Truta] -- Add contrib/ada [Anisimkov] -- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta] -- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant] -- Add contrib/masm686 [Truta] -- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm - [Truta, Vollant] -- Update contrib/delphi; rename to contrib/pascal; add example [Truta] -- Remove contrib/delphi2; add a new contrib/delphi [Truta] -- Avoid inclusion of the nonstandard in contrib/iostream, - and fix some method prototypes [Truta] -- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip - [Truta] -- Avoid the use of backslash (\) in contrib/minizip [Vollant] -- Fix file time handling in contrib/untgz; update makefiles [Truta] -- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines - [Vollant] -- Remove contrib/vstudio/vc15_16 [Vollant] -- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta] -- Update README.contrib [Truta] -- Invert the assignment order of match_head and s->prev[...] in - INSERT_STRING [Truta] -- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings - [Truta] -- Compare function pointers with 0, not with NULL or Z_NULL [Truta] -- Fix prototype of syncsearch in inflate.c [Truta] -- Introduce ASMINF macro to be enabled when using an ASM implementation - of inflate_fast [Truta] -- Change NO_DEFLATE to NO_GZCOMPRESS [Truta] -- Modify test_gzio in example.c to take a single file name as a - parameter [Truta] -- Exit the example.c program if gzopen fails [Truta] -- Add type casts around strlen in example.c [Truta] -- Remove casting to sizeof in minigzip.c; give a proper type - to the variable compared with SUFFIX_LEN [Truta] -- Update definitions of STDC and STDC99 in zconf.h [Truta] -- Synchronize zconf.h with the new Windows DLL interface [Truta] -- Use SYS16BIT instead of __32BIT__ to distinguish between - 16- and 32-bit platforms [Truta] -- Use far memory allocators in small 16-bit memory models for - Turbo C [Truta] -- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in - zlibCompileFlags [Truta] -- Cygwin has vsnprintf [Wilson] -- In Windows16, OS_CODE is 0, as in MSDOS [Truta] -- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson] - -Changes in 1.2.0.4 (10 August 2003) -- Minor FAQ updates -- Be more strict when checking inflateInit2's windowBits parameter -- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well -- Add gzip wrapper option to deflateInit2 using windowBits -- Add updated QNX rule in configure and qnx directory [Bonnefoy] -- Make inflate distance-too-far checks more rigorous -- Clean up FAR usage in inflate -- Add casting to sizeof() in gzio.c and minigzip.c - -Changes in 1.2.0.3 (19 July 2003) -- Fix silly error in gzungetc() implementation [Vollant] -- Update contrib/minizip and contrib/vstudio [Vollant] -- Fix printf format in example.c -- Correct cdecl support in zconf.in.h [Anisimkov] -- Minor FAQ updates - -Changes in 1.2.0.2 (13 July 2003) -- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons -- Attempt to avoid warnings in crc32.c for pointer-int conversion -- Add AIX to configure, remove aix directory [Bakker] -- Add some casts to minigzip.c -- Improve checking after insecure sprintf() or vsprintf() calls -- Remove #elif's from crc32.c -- Change leave label to inf_leave in inflate.c and infback.c to avoid - library conflicts -- Remove inflate gzip decoding by default--only enable gzip decoding by - special request for stricter backward compatibility -- Add zlibCompileFlags() function to return compilation information -- More typecasting in deflate.c to avoid warnings -- Remove leading underscore from _Capital #defines [Truta] -- Fix configure to link shared library when testing -- Add some Windows CE target adjustments [Mai] -- Remove #define ZLIB_DLL in zconf.h [Vollant] -- Add zlib.3 [Rodgers] -- Update RFC URL in deflate.c and algorithm.txt [Mai] -- Add zlib_dll_FAQ.txt to contrib [Truta] -- Add UL to some constants [Truta] -- Update minizip and vstudio [Vollant] -- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h -- Expand use of NO_DUMMY_DECL to avoid all dummy structures -- Added iostream3 to contrib [Schwardt] -- Replace rewind() with fseek() for WinCE [Truta] -- Improve setting of zlib format compression level flags - - Report 0 for huffman and rle strategies and for level == 0 or 1 - - Report 2 only for level == 6 -- Only deal with 64K limit when necessary at compile time [Truta] -- Allow TOO_FAR check to be turned off at compile time [Truta] -- Add gzclearerr() function [Souza] -- Add gzungetc() function - -Changes in 1.2.0.1 (17 March 2003) -- Add Z_RLE strategy for run-length encoding [Truta] - - When Z_RLE requested, restrict matches to distance one - - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE -- Correct FASTEST compilation to allow level == 0 -- Clean up what gets compiled for FASTEST -- Incorporate changes to zconf.in.h [Vollant] - - Refine detection of Turbo C need for dummy returns - - Refine ZLIB_DLL compilation - - Include additional header file on VMS for off_t typedef -- Try to use _vsnprintf where it supplants vsprintf [Vollant] -- Add some casts in inffast.c -- Enchance comments in zlib.h on what happens if gzprintf() tries to - write more than 4095 bytes before compression -- Remove unused state from inflateBackEnd() -- Remove exit(0) from minigzip.c, example.c -- Get rid of all those darn tabs -- Add "check" target to Makefile.in that does the same thing as "test" -- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in -- Update contrib/inflate86 [Anderson] -- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant] -- Add msdos and win32 directories with makefiles [Truta] -- More additions and improvements to the FAQ - -Changes in 1.2.0 (9 March 2003) -- New and improved inflate code - - About 20% faster - - Does not allocate 32K window unless and until needed - - Automatically detects and decompresses gzip streams - - Raw inflate no longer needs an extra dummy byte at end - - Added inflateBack functions using a callback interface--even faster - than inflate, useful for file utilities (gzip, zip) - - Added inflateCopy() function to record state for random access on - externally generated deflate streams (e.g. in gzip files) - - More readable code (I hope) -- New and improved crc32() - - About 50% faster, thanks to suggestions from Rodney Brown -- Add deflateBound() and compressBound() functions -- Fix memory leak in deflateInit2() -- Permit setting dictionary for raw deflate (for parallel deflate) -- Fix const declaration for gzwrite() -- Check for some malloc() failures in gzio.c -- Fix bug in gzopen() on single-byte file 0x1f -- Fix bug in gzread() on concatenated file with 0x1f at end of buffer - and next buffer doesn't start with 0x8b -- Fix uncompress() to return Z_DATA_ERROR on truncated input -- Free memory at end of example.c -- Remove MAX #define in trees.c (conflicted with some libraries) -- Fix static const's in deflate.c, gzio.c, and zutil.[ch] -- Declare malloc() and free() in gzio.c if STDC not defined -- Use malloc() instead of calloc() in zutil.c if int big enough -- Define STDC for AIX -- Add aix/ with approach for compiling shared library on AIX -- Add HP-UX support for shared libraries in configure -- Add OpenUNIX support for shared libraries in configure -- Use $cc instead of gcc to build shared library -- Make prefix directory if needed when installing -- Correct Macintosh avoidance of typedef Byte in zconf.h -- Correct Turbo C memory allocation when under Linux -- Use libz.a instead of -lz in Makefile (assure use of compiled library) -- Update configure to check for snprintf or vsnprintf functions and their - return value, warn during make if using an insecure function -- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that - is lost when library is used--resolution is to build new zconf.h -- Documentation improvements (in zlib.h): - - Document raw deflate and inflate - - Update RFCs URL - - Point out that zlib and gzip formats are different - - Note that Z_BUF_ERROR is not fatal - - Document string limit for gzprintf() and possible buffer overflow - - Note requirement on avail_out when flushing - - Note permitted values of flush parameter of inflate() -- Add some FAQs (and even answers) to the FAQ -- Add contrib/inflate86/ for x86 faster inflate -- Add contrib/blast/ for PKWare Data Compression Library decompression -- Add contrib/puff/ simple inflate for deflate format description - -Changes in 1.1.4 (11 March 2002) -- ZFREE was repeated on same allocation on some error conditions. - This creates a security problem described in - http://www.zlib.org/advisory-2002-03-11.txt -- Returned incorrect error (Z_MEM_ERROR) on some invalid data -- Avoid accesses before window for invalid distances with inflate window - less than 32K. -- force windowBits > 8 to avoid a bug in the encoder for a window size - of 256 bytes. (A complete fix will be available in 1.1.5). - -Changes in 1.1.3 (9 July 1998) -- fix "an inflate input buffer bug that shows up on rare but persistent - occasions" (Mark) -- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) -- fix gzseek(..., SEEK_SET) in write mode -- fix crc check after a gzeek (Frank Faubert) -- fix miniunzip when the last entry in a zip file is itself a zip file - (J Lillge) -- add contrib/asm586 and contrib/asm686 (Brian Raiter) - See http://www.muppetlabs.com/~breadbox/software/assembly.html -- add support for Delphi 3 in contrib/delphi (Bob Dellaca) -- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) -- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) -- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) -- added a FAQ file - -- Support gzdopen on Mac with Metrowerks (Jason Linhart) -- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) -- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) -- avoid some warnings with Borland C (Tom Tanner) -- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) -- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) -- allow several arguments to configure (Tim Mooney, Frodo Looijaard) -- use libdir and includedir in Makefile.in (Tim Mooney) -- support shared libraries on OSF1 V4 (Tim Mooney) -- remove so_locations in "make clean" (Tim Mooney) -- fix maketree.c compilation error (Glenn, Mark) -- Python interface to zlib now in Python 1.5 (Jeremy Hylton) -- new Makefile.riscos (Rich Walker) -- initialize static descriptors in trees.c for embedded targets (Nick Smith) -- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) -- add the OS/2 files in Makefile.in too (Andrew Zabolotny) -- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) -- fix maketree.c to allow clean compilation of inffixed.h (Mark) -- fix parameter check in deflateCopy (Gunther Nikl) -- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) -- Many portability patches by Christian Spieler: - . zutil.c, zutil.h: added "const" for zmem* - . Make_vms.com: fixed some typos - . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists - . msdos/Makefile.msc: remove "default rtl link library" info from obj files - . msdos/Makefile.*: use model-dependent name for the built zlib library - . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: - new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) -- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) -- replace __far with _far for better portability (Christian Spieler, Tom Lane) -- fix test for errno.h in configure (Tim Newsham) - -Changes in 1.1.2 (19 March 98) -- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) - See http://www.winimage.com/zLibDll/unzip.html -- preinitialize the inflate tables for fixed codes, to make the code - completely thread safe (Mark) -- some simplifications and slight speed-up to the inflate code (Mark) -- fix gzeof on non-compressed files (Allan Schrum) -- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) -- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) -- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) -- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) -- do not wrap extern "C" around system includes (Tom Lane) -- mention zlib binding for TCL in README (Andreas Kupries) -- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) -- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) -- allow "configure --prefix $HOME" (Tim Mooney) -- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) -- move Makefile.sas to amiga/Makefile.sas - -Changes in 1.1.1 (27 Feb 98) -- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) -- remove block truncation heuristic which had very marginal effect for zlib - (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the - compression ratio on some files. This also allows inlining _tr_tally for - matches in deflate_slow. -- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) - -Changes in 1.1.0 (24 Feb 98) -- do not return STREAM_END prematurely in inflate (John Bowler) -- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) -- compile with -DFASTEST to get compression code optimized for speed only -- in minigzip, try mmap'ing the input file first (Miguel Albrecht) -- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain - on Sun but significant on HP) - -- add a pointer to experimental unzip library in README (Gilles Vollant) -- initialize variable gcc in configure (Chris Herborth) - -Changes in 1.0.9 (17 Feb 1998) -- added gzputs and gzgets functions -- do not clear eof flag in gzseek (Mark Diekhans) -- fix gzseek for files in transparent mode (Mark Diekhans) -- do not assume that vsprintf returns the number of bytes written (Jens Krinke) -- replace EXPORT with ZEXPORT to avoid conflict with other programs -- added compress2 in zconf.h, zlib.def, zlib.dnt -- new asm code from Gilles Vollant in contrib/asm386 -- simplify the inflate code (Mark): - . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() - . ZALLOC the length list in inflate_trees_fixed() instead of using stack - . ZALLOC the value area for huft_build() instead of using stack - . Simplify Z_FINISH check in inflate() - -- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 -- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) -- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with - the declaration of FAR (Gilles VOllant) -- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) -- read_buf buf parameter of type Bytef* instead of charf* -- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) -- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) -- fix check for presence of directories in "make install" (Ian Willis) - -Changes in 1.0.8 (27 Jan 1998) -- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) -- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) -- added compress2() to allow setting the compression level -- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) -- use constant arrays for the static trees in trees.c instead of computing - them at run time (thanks to Ken Raeburn for this suggestion). To create - trees.h, compile with GEN_TREES_H and run "make test". -- check return code of example in "make test" and display result -- pass minigzip command line options to file_compress -- simplifying code of inflateSync to avoid gcc 2.8 bug - -- support CC="gcc -Wall" in configure -s (QingLong) -- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) -- fix test for shared library support to avoid compiler warnings -- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) -- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) -- do not use fdopen for Metrowerks on Mac (Brad Pettit)) -- add checks for gzputc and gzputc in example.c -- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) -- use const for the CRC table (Ken Raeburn) -- fixed "make uninstall" for shared libraries -- use Tracev instead of Trace in infblock.c -- in example.c use correct compressed length for test_sync -- suppress +vnocompatwarnings in configure for HPUX (not always supported) - -Changes in 1.0.7 (20 Jan 1998) -- fix gzseek which was broken in write mode -- return error for gzseek to negative absolute position -- fix configure for Linux (Chun-Chung Chen) -- increase stack space for MSC (Tim Wegner) -- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) -- define EXPORTVA for gzprintf (Gilles Vollant) -- added man page zlib.3 (Rick Rodgers) -- for contrib/untgz, fix makedir() and improve Makefile - -- check gzseek in write mode in example.c -- allocate extra buffer for seeks only if gzseek is actually called -- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) -- add inflateSyncPoint in zconf.h -- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def - -Changes in 1.0.6 (19 Jan 1998) -- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and - gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) -- Fix a deflate bug occurring only with compression level 0 (thanks to - Andy Buckler for finding this one). -- In minigzip, pass transparently also the first byte for .Z files. -- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() -- check Z_FINISH in inflate (thanks to Marc Schluper) -- Implement deflateCopy (thanks to Adam Costello) -- make static libraries by default in configure, add --shared option. -- move MSDOS or Windows specific files to directory msdos -- suppress the notion of partial flush to simplify the interface - (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) -- suppress history buffer provided by application to simplify the interface - (this feature was not implemented anyway in 1.0.4) -- next_in and avail_in must be initialized before calling inflateInit or - inflateInit2 -- add EXPORT in all exported functions (for Windows DLL) -- added Makefile.nt (thanks to Stephen Williams) -- added the unsupported "contrib" directory: - contrib/asm386/ by Gilles Vollant - 386 asm code replacing longest_match(). - contrib/iostream/ by Kevin Ruland - A C++ I/O streams interface to the zlib gz* functions - contrib/iostream2/ by Tyge Løvset - Another C++ I/O streams interface - contrib/untgz/ by "Pedro A. Aranda Guti\irrez" - A very simple tar.gz file extractor using zlib - contrib/visual-basic.txt by Carlos Rios - How to use compress(), uncompress() and the gz* functions from VB. -- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression - level) in minigzip (thanks to Tom Lane) - -- use const for rommable constants in deflate -- added test for gzseek and gztell in example.c -- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) -- add undocumented function zError to convert error code to string - (for Tim Smithers) -- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. -- Use default memcpy for Symantec MSDOS compiler. -- Add EXPORT keyword for check_func (needed for Windows DLL) -- add current directory to LD_LIBRARY_PATH for "make test" -- create also a link for libz.so.1 -- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) -- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) -- added -soname for Linux in configure (Chun-Chung Chen, -- assign numbers to the exported functions in zlib.def (for Windows DLL) -- add advice in zlib.h for best usage of deflateSetDictionary -- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) -- allow compilation with ANSI keywords only enabled for TurboC in large model -- avoid "versionString"[0] (Borland bug) -- add NEED_DUMMY_RETURN for Borland -- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). -- allow compilation with CC -- defined STDC for OS/2 (David Charlap) -- limit external names to 8 chars for MVS (Thomas Lund) -- in minigzip.c, use static buffers only for 16-bit systems -- fix suffix check for "minigzip -d foo.gz" -- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) -- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) -- added makelcc.bat for lcc-win32 (Tom St Denis) -- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) -- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. -- check for unistd.h in configure (for off_t) -- remove useless check parameter in inflate_blocks_free -- avoid useless assignment of s->check to itself in inflate_blocks_new -- do not flush twice in gzclose (thanks to Ken Raeburn) -- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h -- use NO_ERRNO_H instead of enumeration of operating systems with errno.h -- work around buggy fclose on pipes for HP/UX -- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) -- fix configure if CC is already equal to gcc - -Changes in 1.0.5 (3 Jan 98) -- Fix inflate to terminate gracefully when fed corrupted or invalid data -- Use const for rommable constants in inflate -- Eliminate memory leaks on error conditions in inflate -- Removed some vestigial code in inflate -- Update web address in README - -Changes in 1.0.4 (24 Jul 96) -- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF - bit, so the decompressor could decompress all the correct data but went - on to attempt decompressing extra garbage data. This affected minigzip too. -- zlibVersion and gzerror return const char* (needed for DLL) -- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) -- use z_error only for DEBUG (avoid problem with DLLs) - -Changes in 1.0.3 (2 Jul 96) -- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS - small and medium models; this makes the library incompatible with previous - versions for these models. (No effect in large model or on other systems.) -- return OK instead of BUF_ERROR if previous deflate call returned with - avail_out as zero but there is nothing to do -- added memcmp for non STDC compilers -- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) -- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) -- better check for 16-bit mode MSC (avoids problem with Symantec) - -Changes in 1.0.2 (23 May 96) -- added Windows DLL support -- added a function zlibVersion (for the DLL support) -- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) -- Bytef is define's instead of typedef'd only for Borland C -- avoid reading uninitialized memory in example.c -- mention in README that the zlib format is now RFC1950 -- updated Makefile.dj2 -- added algorithm.doc - -Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] -- fix array overlay in deflate.c which sometimes caused bad compressed data -- fix inflate bug with empty stored block -- fix MSDOS medium model which was broken in 0.99 -- fix deflateParams() which could generate bad compressed data. -- Bytef is define'd instead of typedef'ed (work around Borland bug) -- added an INDEX file -- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), - Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) -- speed up adler32 for modern machines without auto-increment -- added -ansi for IRIX in configure -- static_init_done in trees.c is an int -- define unlink as delete for VMS -- fix configure for QNX -- add configure branch for SCO and HPUX -- avoid many warnings (unused variables, dead assignments, etc...) -- no fdopen for BeOS -- fix the Watcom fix for 32 bit mode (define FAR as empty) -- removed redefinition of Byte for MKWERKS -- work around an MWKERKS bug (incorrect merge of all .h files) - -Changes in 0.99 (27 Jan 96) -- allow preset dictionary shared between compressor and decompressor -- allow compression level 0 (no compression) -- add deflateParams in zlib.h: allow dynamic change of compression level - and compression strategy. -- test large buffers and deflateParams in example.c -- add optional "configure" to build zlib as a shared library -- suppress Makefile.qnx, use configure instead -- fixed deflate for 64-bit systems (detected on Cray) -- fixed inflate_blocks for 64-bit systems (detected on Alpha) -- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) -- always return Z_BUF_ERROR when deflate() has nothing to do -- deflateInit and inflateInit are now macros to allow version checking -- prefix all global functions and types with z_ with -DZ_PREFIX -- make falloc completely reentrant (inftrees.c) -- fixed very unlikely race condition in ct_static_init -- free in reverse order of allocation to help memory manager -- use zlib-1.0/* instead of zlib/* inside the tar.gz -- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith - -Wconversion -Wstrict-prototypes -Wmissing-prototypes" -- allow gzread on concatenated .gz files -- deflateEnd now returns Z_DATA_ERROR if it was premature -- deflate is finally (?) fully deterministic (no matches beyond end of input) -- Document Z_SYNC_FLUSH -- add uninstall in Makefile -- Check for __cpluplus in zlib.h -- Better test in ct_align for partial flush -- avoid harmless warnings for Borland C++ -- initialize hash_head in deflate.c -- avoid warning on fdopen (gzio.c) for HP cc -Aa -- include stdlib.h for STDC compilers -- include errno.h for Cray -- ignore error if ranlib doesn't exist -- call ranlib twice for NeXTSTEP -- use exec_prefix instead of prefix for libz.a -- renamed ct_* as _tr_* to avoid conflict with applications -- clear z->msg in inflateInit2 before any error return -- initialize opaque in example.c, gzio.c, deflate.c and inflate.c -- fixed typo in zconf.h (_GNUC__ => __GNUC__) -- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) -- fix typo in Make_vms.com (f$trnlnm -> f$getsyi) -- in fcalloc, normalize pointer if size > 65520 bytes -- don't use special fcalloc for 32 bit Borland C++ -- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... -- use Z_BINARY instead of BINARY -- document that gzclose after gzdopen will close the file -- allow "a" as mode in gzopen. -- fix error checking in gzread -- allow skipping .gz extra-field on pipes -- added reference to Perl interface in README -- put the crc table in FAR data (I dislike more and more the medium model :) -- added get_crc_table -- added a dimension to all arrays (Borland C can't count). -- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast -- guard against multiple inclusion of *.h (for precompiled header on Mac) -- Watcom C pretends to be Microsoft C small model even in 32 bit mode. -- don't use unsized arrays to avoid silly warnings by Visual C++: - warning C4746: 'inflate_mask' : unsized array treated as '__far' - (what's wrong with far data in far model?). -- define enum out of inflate_blocks_state to allow compilation with C++ - -Changes in 0.95 (16 Aug 95) -- fix MSDOS small and medium model (now easier to adapt to any compiler) -- inlined send_bits -- fix the final (:-) bug for deflate with flush (output was correct but - not completely flushed in rare occasions). -- default window size is same for compression and decompression - (it's now sufficient to set MAX_WBITS in zconf.h). -- voidp -> voidpf and voidnp -> voidp (for consistency with other - typedefs and because voidnp was not near in large model). - -Changes in 0.94 (13 Aug 95) -- support MSDOS medium model -- fix deflate with flush (could sometimes generate bad output) -- fix deflateReset (zlib header was incorrectly suppressed) -- added support for VMS -- allow a compression level in gzopen() -- gzflush now calls fflush -- For deflate with flush, flush even if no more input is provided. -- rename libgz.a as libz.a -- avoid complex expression in infcodes.c triggering Turbo C bug -- work around a problem with gcc on Alpha (in INSERT_STRING) -- don't use inline functions (problem with some gcc versions) -- allow renaming of Byte, uInt, etc... with #define. -- avoid warning about (unused) pointer before start of array in deflate.c -- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c -- avoid reserved word 'new' in trees.c - -Changes in 0.93 (25 June 95) -- temporarily disable inline functions -- make deflate deterministic -- give enough lookahead for PARTIAL_FLUSH -- Set binary mode for stdin/stdout in minigzip.c for OS/2 -- don't even use signed char in inflate (not portable enough) -- fix inflate memory leak for segmented architectures - -Changes in 0.92 (3 May 95) -- don't assume that char is signed (problem on SGI) -- Clear bit buffer when starting a stored block -- no memcpy on Pyramid -- suppressed inftest.c -- optimized fill_window, put longest_match inline for gcc -- optimized inflate on stored blocks. -- untabify all sources to simplify patches - -Changes in 0.91 (2 May 95) -- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h -- Document the memory requirements in zconf.h -- added "make install" -- fix sync search logic in inflateSync -- deflate(Z_FULL_FLUSH) now works even if output buffer too short -- after inflateSync, don't scare people with just "lo world" -- added support for DJGPP - -Changes in 0.9 (1 May 95) -- don't assume that zalloc clears the allocated memory (the TurboC bug - was Mark's bug after all :) -- let again gzread copy uncompressed data unchanged (was working in 0.71) -- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented -- added a test of inflateSync in example.c -- moved MAX_WBITS to zconf.h because users might want to change that. -- document explicitly that zalloc(64K) on MSDOS must return a normalized - pointer (zero offset) -- added Makefiles for Microsoft C, Turbo C, Borland C++ -- faster crc32() - -Changes in 0.8 (29 April 95) -- added fast inflate (inffast.c) -- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this - is incompatible with previous versions of zlib which returned Z_OK. -- work around a TurboC compiler bug (bad code for b << 0, see infutil.h) - (actually that was not a compiler bug, see 0.81 above) -- gzread no longer reads one extra byte in certain cases -- In gzio destroy(), don't reference a freed structure -- avoid many warnings for MSDOS -- avoid the ERROR symbol which is used by MS Windows - -Changes in 0.71 (14 April 95) -- Fixed more MSDOS compilation problems :( There is still a bug with - TurboC large model. - -Changes in 0.7 (14 April 95) -- Added full inflate support. -- Simplified the crc32() interface. The pre- and post-conditioning - (one's complement) is now done inside crc32(). WARNING: this is - incompatible with previous versions; see zlib.h for the new usage. - -Changes in 0.61 (12 April 95) -- workaround for a bug in TurboC. example and minigzip now work on MSDOS. - -Changes in 0.6 (11 April 95) -- added minigzip.c -- added gzdopen to reopen a file descriptor as gzFile -- added transparent reading of non-gziped files in gzread. -- fixed bug in gzread (don't read crc as data) -- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). -- don't allocate big arrays in the stack (for MSDOS) -- fix some MSDOS compilation problems - -Changes in 0.5: -- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but - not yet Z_FULL_FLUSH. -- support decompression but only in a single step (forced Z_FINISH) -- added opaque object for zalloc and zfree. -- added deflateReset and inflateReset -- added a variable zlib_version for consistency checking. -- renamed the 'filter' parameter of deflateInit2 as 'strategy'. - Added Z_FILTERED and Z_HUFFMAN_ONLY constants. - -Changes in 0.4: -- avoid "zip" everywhere, use zlib instead of ziplib. -- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush - if compression method == 8. -- added adler32 and crc32 -- renamed deflateOptions as deflateInit2, call one or the other but not both -- added the method parameter for deflateInit2. -- added inflateInit2 -- simplied considerably deflateInit and inflateInit by not supporting - user-provided history buffer. This is supported only in deflateInit2 - and inflateInit2. - -Changes in 0.3: -- prefix all macro names with Z_ -- use Z_FINISH instead of deflateEnd to finish compression. -- added Z_HUFFMAN_ONLY -- added gzerror() diff --git a/deps/zlib-1.2.11/FAQ b/deps/zlib-1.2.11/FAQ deleted file mode 100644 index 99b7cf9..0000000 --- a/deps/zlib-1.2.11/FAQ +++ /dev/null @@ -1,368 +0,0 @@ - - Frequently Asked Questions about zlib - - -If your question is not there, please check the zlib home page -http://zlib.net/ which may have more recent information. -The lastest zlib FAQ is at http://zlib.net/zlib_faq.html - - - 1. Is zlib Y2K-compliant? - - Yes. zlib doesn't handle dates. - - 2. Where can I get a Windows DLL version? - - The zlib sources can be compiled without change to produce a DLL. See the - file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the - precompiled DLL are found in the zlib web site at http://zlib.net/ . - - 3. Where can I get a Visual Basic interface to zlib? - - See - * http://marknelson.us/1997/01/01/zlib-engine/ - * win32/DLL_FAQ.txt in the zlib distribution - - 4. compress() returns Z_BUF_ERROR. - - Make sure that before the call of compress(), the length of the compressed - buffer is equal to the available size of the compressed buffer and not - zero. For Visual Basic, check that this parameter is passed by reference - ("as any"), not by value ("as long"). - - 5. deflate() or inflate() returns Z_BUF_ERROR. - - Before making the call, make sure that avail_in and avail_out are not zero. - When setting the parameter flush equal to Z_FINISH, also make sure that - avail_out is big enough to allow processing all pending input. Note that a - Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be - made with more input or output space. A Z_BUF_ERROR may in fact be - unavoidable depending on how the functions are used, since it is not - possible to tell whether or not there is more output pending when - strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a - heavily annotated example. - - 6. Where's the zlib documentation (man pages, etc.)? - - It's in zlib.h . Examples of zlib usage are in the files test/example.c - and test/minigzip.c, with more in examples/ . - - 7. Why don't you use GNU autoconf or libtool or ...? - - Because we would like to keep zlib as a very small and simple package. - zlib is rather portable and doesn't need much configuration. - - 8. I found a bug in zlib. - - Most of the time, such problems are due to an incorrect usage of zlib. - Please try to reproduce the problem with a small program and send the - corresponding source to us at zlib@gzip.org . Do not send multi-megabyte - data files without prior agreement. - - 9. Why do I get "undefined reference to gzputc"? - - If "make test" produces something like - - example.o(.text+0x154): undefined reference to `gzputc' - - check that you don't have old files libz.* in /usr/lib, /usr/local/lib or - /usr/X11R6/lib. Remove any old versions, then do "make install". - -10. I need a Delphi interface to zlib. - - See the contrib/delphi directory in the zlib distribution. - -11. Can zlib handle .zip archives? - - Not by itself, no. See the directory contrib/minizip in the zlib - distribution. - -12. Can zlib handle .Z files? - - No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt - the code of uncompress on your own. - -13. How can I make a Unix shared library? - - By default a shared (and a static) library is built for Unix. So: - - make distclean - ./configure - make - -14. How do I install a shared zlib library on Unix? - - After the above, then: - - make install - - However, many flavors of Unix come with a shared zlib already installed. - Before going to the trouble of compiling a shared version of zlib and - trying to install it, you may want to check if it's already there! If you - can #include , it's there. The -lz option will probably link to - it. You can check the version at the top of zlib.h or with the - ZLIB_VERSION symbol defined in zlib.h . - -15. I have a question about OttoPDF. - - We are not the authors of OttoPDF. The real author is on the OttoPDF web - site: Joel Hainley, jhainley@myndkryme.com. - -16. Can zlib decode Flate data in an Adobe PDF file? - - Yes. See http://www.pdflib.com/ . To modify PDF forms, see - http://sourceforge.net/projects/acroformtool/ . - -17. Why am I getting this "register_frame_info not found" error on Solaris? - - After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib - generates an error such as: - - ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: - symbol __register_frame_info: referenced symbol not found - - The symbol __register_frame_info is not part of zlib, it is generated by - the C compiler (cc or gcc). You must recompile applications using zlib - which have this problem. This problem is specific to Solaris. See - http://www.sunfreeware.com for Solaris versions of zlib and applications - using zlib. - -18. Why does gzip give an error on a file I make with compress/deflate? - - The compress and deflate functions produce data in the zlib format, which - is different and incompatible with the gzip format. The gz* functions in - zlib on the other hand use the gzip format. Both the zlib and gzip formats - use the same compressed data format internally, but have different headers - and trailers around the compressed data. - -19. Ok, so why are there two different formats? - - The gzip format was designed to retain the directory information about a - single file, such as the name and last modification date. The zlib format - on the other hand was designed for in-memory and communication channel - applications, and has a much more compact header and trailer and uses a - faster integrity check than gzip. - -20. Well that's nice, but how do I make a gzip file in memory? - - You can request that deflate write the gzip format instead of the zlib - format using deflateInit2(). You can also request that inflate decode the - gzip format using inflateInit2(). Read zlib.h for more details. - -21. Is zlib thread-safe? - - Yes. However any library routines that zlib uses and any application- - provided memory allocation routines must also be thread-safe. zlib's gz* - functions use stdio library routines, and most of zlib's functions use the - library memory allocation routines by default. zlib's *Init* functions - allow for the application to provide custom memory allocation routines. - - Of course, you should only operate on any given zlib or gzip stream from a - single thread at a time. - -22. Can I use zlib in my commercial application? - - Yes. Please read the license in zlib.h. - -23. Is zlib under the GNU license? - - No. Please read the license in zlib.h. - -24. The license says that altered source versions must be "plainly marked". So - what exactly do I need to do to meet that requirement? - - You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In - particular, the final version number needs to be changed to "f", and an - identification string should be appended to ZLIB_VERSION. Version numbers - x.x.x.f are reserved for modifications to zlib by others than the zlib - maintainers. For example, if the version of the base zlib you are altering - is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and - ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also - update the version strings in deflate.c and inftrees.c. - - For altered source distributions, you should also note the origin and - nature of the changes in zlib.h, as well as in ChangeLog and README, along - with the dates of the alterations. The origin should include at least your - name (or your company's name), and an email address to contact for help or - issues with the library. - - Note that distributing a compiled zlib library along with zlib.h and - zconf.h is also a source distribution, and so you should change - ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes - in zlib.h as you would for a full source distribution. - -25. Will zlib work on a big-endian or little-endian architecture, and can I - exchange compressed data between them? - - Yes and yes. - -26. Will zlib work on a 64-bit machine? - - Yes. It has been tested on 64-bit machines, and has no dependence on any - data types being limited to 32-bits in length. If you have any - difficulties, please provide a complete problem report to zlib@gzip.org - -27. Will zlib decompress data from the PKWare Data Compression Library? - - No. The PKWare DCL uses a completely different compressed data format than - does PKZIP and zlib. However, you can look in zlib's contrib/blast - directory for a possible solution to your problem. - -28. Can I access data randomly in a compressed stream? - - No, not without some preparation. If when compressing you periodically use - Z_FULL_FLUSH, carefully write all the pending data at those points, and - keep an index of those locations, then you can start decompression at those - points. You have to be careful to not use Z_FULL_FLUSH too often, since it - can significantly degrade compression. Alternatively, you can scan a - deflate stream once to generate an index, and then use that index for - random access. See examples/zran.c . - -29. Does zlib work on MVS, OS/390, CICS, etc.? - - It has in the past, but we have not heard of any recent evidence. There - were working ports of zlib 1.1.4 to MVS, but those links no longer work. - If you know of recent, successful applications of zlib on these operating - systems, please let us know. Thanks. - -30. Is there some simpler, easier to read version of inflate I can look at to - understand the deflate format? - - First off, you should read RFC 1951. Second, yes. Look in zlib's - contrib/puff directory. - -31. Does zlib infringe on any patents? - - As far as we know, no. In fact, that was originally the whole point behind - zlib. Look here for some more information: - - http://www.gzip.org/#faq11 - -32. Can zlib work with greater than 4 GB of data? - - Yes. inflate() and deflate() will process any amount of data correctly. - Each call of inflate() or deflate() is limited to input and output chunks - of the maximum value that can be stored in the compiler's "unsigned int" - type, but there is no limit to the number of chunks. Note however that the - strm.total_in and strm_total_out counters may be limited to 4 GB. These - counters are provided as a convenience and are not used internally by - inflate() or deflate(). The application can easily set up its own counters - updated after each call of inflate() or deflate() to count beyond 4 GB. - compress() and uncompress() may be limited to 4 GB, since they operate in a - single call. gzseek() and gztell() may be limited to 4 GB depending on how - zlib is compiled. See the zlibCompileFlags() function in zlib.h. - - The word "may" appears several times above since there is a 4 GB limit only - if the compiler's "long" type is 32 bits. If the compiler's "long" type is - 64 bits, then the limit is 16 exabytes. - -33. Does zlib have any security vulnerabilities? - - The only one that we are aware of is potentially in gzprintf(). If zlib is - compiled to use sprintf() or vsprintf(), then there is no protection - against a buffer overflow of an 8K string space (or other value as set by - gzbuffer()), other than the caller of gzprintf() assuring that the output - will not exceed 8K. On the other hand, if zlib is compiled to use - snprintf() or vsnprintf(), which should normally be the case, then there is - no vulnerability. The ./configure script will display warnings if an - insecure variation of sprintf() will be used by gzprintf(). Also the - zlibCompileFlags() function will return information on what variant of - sprintf() is used by gzprintf(). - - If you don't have snprintf() or vsnprintf() and would like one, you can - find a portable implementation here: - - http://www.ijs.si/software/snprintf/ - - Note that you should be using the most recent version of zlib. Versions - 1.1.3 and before were subject to a double-free vulnerability, and versions - 1.2.1 and 1.2.2 were subject to an access exception when decompressing - invalid compressed data. - -34. Is there a Java version of zlib? - - Probably what you want is to use zlib in Java. zlib is already included - as part of the Java SDK in the java.util.zip package. If you really want - a version of zlib written in the Java language, look on the zlib home - page for links: http://zlib.net/ . - -35. I get this or that compiler or source-code scanner warning when I crank it - up to maximally-pedantic. Can't you guys write proper code? - - Many years ago, we gave up attempting to avoid warnings on every compiler - in the universe. It just got to be a waste of time, and some compilers - were downright silly as well as contradicted each other. So now, we simply - make sure that the code always works. - -36. Valgrind (or some similar memory access checker) says that deflate is - performing a conditional jump that depends on an uninitialized value. - Isn't that a bug? - - No. That is intentional for performance reasons, and the output of deflate - is not affected. This only started showing up recently since zlib 1.2.x - uses malloc() by default for allocations, whereas earlier versions used - calloc(), which zeros out the allocated memory. Even though the code was - correct, versions 1.2.4 and later was changed to not stimulate these - checkers. - -37. Will zlib read the (insert any ancient or arcane format here) compressed - data format? - - Probably not. Look in the comp.compression FAQ for pointers to various - formats and associated software. - -38. How can I encrypt/decrypt zip files with zlib? - - zlib doesn't support encryption. The original PKZIP encryption is very - weak and can be broken with freely available programs. To get strong - encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib - compression. For PKZIP compatible "encryption", look at - http://www.info-zip.org/ - -39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings? - - "gzip" is the gzip format, and "deflate" is the zlib format. They should - probably have called the second one "zlib" instead to avoid confusion with - the raw deflate compressed data format. While the HTTP 1.1 RFC 2616 - correctly points to the zlib specification in RFC 1950 for the "deflate" - transfer encoding, there have been reports of servers and browsers that - incorrectly produce or expect raw deflate data per the deflate - specification in RFC 1951, most notably Microsoft. So even though the - "deflate" transfer encoding using the zlib format would be the more - efficient approach (and in fact exactly what the zlib format was designed - for), using the "gzip" transfer encoding is probably more reliable due to - an unfortunate choice of name on the part of the HTTP 1.1 authors. - - Bottom line: use the gzip format for HTTP 1.1 encoding. - -40. Does zlib support the new "Deflate64" format introduced by PKWare? - - No. PKWare has apparently decided to keep that format proprietary, since - they have not documented it as they have previous compression formats. In - any case, the compression improvements are so modest compared to other more - modern approaches, that it's not worth the effort to implement. - -41. I'm having a problem with the zip functions in zlib, can you help? - - There are no zip functions in zlib. You are probably using minizip by - Giles Vollant, which is found in the contrib directory of zlib. It is not - part of zlib. In fact none of the stuff in contrib is part of zlib. The - files in there are not supported by the zlib authors. You need to contact - the authors of the respective contribution for help. - -42. The match.asm code in contrib is under the GNU General Public License. - Since it's part of zlib, doesn't that mean that all of zlib falls under the - GNU GPL? - - No. The files in contrib are not part of zlib. They were contributed by - other authors and are provided as a convenience to the user within the zlib - distribution. Each item in contrib has its own license. - -43. Is zlib subject to export controls? What is its ECCN? - - zlib is not subject to export controls, and so is classified as EAR99. - -44. Can you please sign these lengthy legal documents and fax them back to us - so that we can use your software in our product? - - No. Go away. Shoo. diff --git a/deps/zlib-1.2.11/INDEX b/deps/zlib-1.2.11/INDEX deleted file mode 100644 index 2ba0641..0000000 --- a/deps/zlib-1.2.11/INDEX +++ /dev/null @@ -1,68 +0,0 @@ -CMakeLists.txt cmake build file -ChangeLog history of changes -FAQ Frequently Asked Questions about zlib -INDEX this file -Makefile dummy Makefile that tells you to ./configure -Makefile.in template for Unix Makefile -README guess what -configure configure script for Unix -make_vms.com makefile for VMS -test/example.c zlib usages examples for build testing -test/minigzip.c minimal gzip-like functionality for build testing -test/infcover.c inf*.c code coverage for build coverage testing -treebuild.xml XML description of source file dependencies -zconf.h.cmakein zconf.h template for cmake -zconf.h.in zconf.h template for configure -zlib.3 Man page for zlib -zlib.3.pdf Man page in PDF format -zlib.map Linux symbol information -zlib.pc.in Template for pkg-config descriptor -zlib.pc.cmakein zlib.pc template for cmake -zlib2ansi perl script to convert source files for C++ compilation - -amiga/ makefiles for Amiga SAS C -as400/ makefiles for AS/400 -doc/ documentation for formats and algorithms -msdos/ makefiles for MSDOS -nintendods/ makefile for Nintendo DS -old/ makefiles for various architectures and zlib documentation - files that have not yet been updated for zlib 1.2.x -qnx/ makefiles for QNX -watcom/ makefiles for OpenWatcom -win32/ makefiles for Windows - - zlib public header files (required for library use): -zconf.h -zlib.h - - private source files used to build the zlib library: -adler32.c -compress.c -crc32.c -crc32.h -deflate.c -deflate.h -gzclose.c -gzguts.h -gzlib.c -gzread.c -gzwrite.c -infback.c -inffast.c -inffast.h -inffixed.h -inflate.c -inflate.h -inftrees.c -inftrees.h -trees.c -trees.h -uncompr.c -zutil.c -zutil.h - - source files for sample programs -See examples/README.examples - - unsupported contributions by third parties -See contrib/README.contrib diff --git a/deps/zlib-1.2.11/Makefile b/deps/zlib-1.2.11/Makefile deleted file mode 100644 index 6bba86c..0000000 --- a/deps/zlib-1.2.11/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -all: - -@echo "Please use ./configure first. Thank you." - -distclean: - make -f Makefile.in distclean diff --git a/deps/zlib-1.2.11/Makefile.in b/deps/zlib-1.2.11/Makefile.in deleted file mode 100644 index 5a77949..0000000 --- a/deps/zlib-1.2.11/Makefile.in +++ /dev/null @@ -1,410 +0,0 @@ -# Makefile for zlib -# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler -# For conditions of distribution and use, see copyright notice in zlib.h - -# To compile and test, type: -# ./configure; make test -# Normally configure builds both a static and a shared library. -# If you want to build just a static library, use: ./configure --static - -# To use the asm code, type: -# cp contrib/asm?86/match.S ./match.S -# make LOC=-DASMV OBJA=match.o - -# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: -# make install -# To install in $HOME instead of /usr/local, use: -# make install prefix=$HOME - -CC=cc - -CFLAGS=-O -#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 -#CFLAGS=-g -DZLIB_DEBUG -#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ -# -Wstrict-prototypes -Wmissing-prototypes - -SFLAGS=-O -LDFLAGS= -TEST_LDFLAGS=-L. libz.a -LDSHARED=$(CC) -CPP=$(CC) -E - -STATICLIB=libz.a -SHAREDLIB=libz.so -SHAREDLIBV=libz.so.1.2.11 -SHAREDLIBM=libz.so.1 -LIBS=$(STATICLIB) $(SHAREDLIBV) - -AR=ar -ARFLAGS=rc -RANLIB=ranlib -LDCONFIG=ldconfig -LDSHAREDLIBC=-lc -TAR=tar -SHELL=/bin/sh -EXE= - -prefix = /usr/local -exec_prefix = ${prefix} -libdir = ${exec_prefix}/lib -sharedlibdir = ${libdir} -includedir = ${prefix}/include -mandir = ${prefix}/share/man -man3dir = ${mandir}/man3 -pkgconfigdir = ${libdir}/pkgconfig -SRCDIR= -ZINC= -ZINCOUT=-I. - -OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o -OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o -OBJC = $(OBJZ) $(OBJG) - -PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo -PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo -PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG) - -# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo -OBJA = -PIC_OBJA = - -OBJS = $(OBJC) $(OBJA) - -PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA) - -all: static shared - -static: example$(EXE) minigzip$(EXE) - -shared: examplesh$(EXE) minigzipsh$(EXE) - -all64: example64$(EXE) minigzip64$(EXE) - -check: test - -test: all teststatic testshared - -teststatic: static - @TMPST=tmpst_$$; \ - if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \ - echo ' *** zlib test OK ***'; \ - else \ - echo ' *** zlib test FAILED ***'; false; \ - fi; \ - rm -f $$TMPST - -testshared: shared - @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ - LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \ - DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \ - SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \ - TMPSH=tmpsh_$$; \ - if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \ - echo ' *** zlib shared test OK ***'; \ - else \ - echo ' *** zlib shared test FAILED ***'; false; \ - fi; \ - rm -f $$TMPSH - -test64: all64 - @TMP64=tmp64_$$; \ - if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \ - echo ' *** zlib 64-bit test OK ***'; \ - else \ - echo ' *** zlib 64-bit test FAILED ***'; false; \ - fi; \ - rm -f $$TMP64 - -infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h - $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c - -infcover: infcover.o libz.a - $(CC) $(CFLAGS) -o $@ infcover.o libz.a - -cover: infcover - rm -f *.gcda - ./infcover - gcov inf*.c - -libz.a: $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 - -match.o: match.S - $(CPP) match.S > _match.s - $(CC) -c _match.s - mv _match.o match.o - rm -f _match.s - -match.lo: match.S - $(CPP) match.S > _match.s - $(CC) -c -fPIC _match.s - mv _match.o match.lo - rm -f _match.s - -example.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h - $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/example.c - -minigzip.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h - $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/minigzip.c - -example64.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h - $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/example.c - -minigzip64.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h - $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/minigzip.c - - -adler32.o: $(SRCDIR)adler32.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)adler32.c - -crc32.o: $(SRCDIR)crc32.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)crc32.c - -deflate.o: $(SRCDIR)deflate.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c - -infback.o: $(SRCDIR)infback.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)infback.c - -inffast.o: $(SRCDIR)inffast.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inffast.c - -inflate.o: $(SRCDIR)inflate.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inflate.c - -inftrees.o: $(SRCDIR)inftrees.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inftrees.c - -trees.o: $(SRCDIR)trees.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)trees.c - -zutil.o: $(SRCDIR)zutil.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)zutil.c - -compress.o: $(SRCDIR)compress.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)compress.c - -uncompr.o: $(SRCDIR)uncompr.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)uncompr.c - -gzclose.o: $(SRCDIR)gzclose.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzclose.c - -gzlib.o: $(SRCDIR)gzlib.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzlib.c - -gzread.o: $(SRCDIR)gzread.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzread.c - -gzwrite.o: $(SRCDIR)gzwrite.c - $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c - - -adler32.lo: $(SRCDIR)adler32.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/adler32.o $(SRCDIR)adler32.c - -@mv objs/adler32.o $@ - -crc32.lo: $(SRCDIR)crc32.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/crc32.o $(SRCDIR)crc32.c - -@mv objs/crc32.o $@ - -deflate.lo: $(SRCDIR)deflate.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/deflate.o $(SRCDIR)deflate.c - -@mv objs/deflate.o $@ - -infback.lo: $(SRCDIR)infback.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/infback.o $(SRCDIR)infback.c - -@mv objs/infback.o $@ - -inffast.lo: $(SRCDIR)inffast.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inffast.o $(SRCDIR)inffast.c - -@mv objs/inffast.o $@ - -inflate.lo: $(SRCDIR)inflate.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inflate.o $(SRCDIR)inflate.c - -@mv objs/inflate.o $@ - -inftrees.lo: $(SRCDIR)inftrees.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c - -@mv objs/inftrees.o $@ - -trees.lo: $(SRCDIR)trees.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/trees.o $(SRCDIR)trees.c - -@mv objs/trees.o $@ - -zutil.lo: $(SRCDIR)zutil.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/zutil.o $(SRCDIR)zutil.c - -@mv objs/zutil.o $@ - -compress.lo: $(SRCDIR)compress.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/compress.o $(SRCDIR)compress.c - -@mv objs/compress.o $@ - -uncompr.lo: $(SRCDIR)uncompr.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c - -@mv objs/uncompr.o $@ - -gzclose.lo: $(SRCDIR)gzclose.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c - -@mv objs/gzclose.o $@ - -gzlib.lo: $(SRCDIR)gzlib.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c - -@mv objs/gzlib.o $@ - -gzread.lo: $(SRCDIR)gzread.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzread.o $(SRCDIR)gzread.c - -@mv objs/gzread.o $@ - -gzwrite.lo: $(SRCDIR)gzwrite.c - -@mkdir objs 2>/dev/null || test -d objs - $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c - -@mv objs/gzwrite.o $@ - - -placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a - $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS) - rm -f $(SHAREDLIB) $(SHAREDLIBM) - ln -s $@ $(SHAREDLIB) - ln -s $@ $(SHAREDLIBM) - -@rmdir objs - -example$(EXE): example.o $(STATICLIB) - $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS) - -minigzip$(EXE): minigzip.o $(STATICLIB) - $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS) - -examplesh$(EXE): example.o $(SHAREDLIBV) - $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV) - -minigzipsh$(EXE): minigzip.o $(SHAREDLIBV) - $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV) - -example64$(EXE): example64.o $(STATICLIB) - $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS) - -minigzip64$(EXE): minigzip64.o $(STATICLIB) - $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS) - -install-libs: $(LIBS) - -@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi - -@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi - -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi - -@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi - -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi - rm -f $(DESTDIR)$(libdir)/$(STATICLIB) - cp $(STATICLIB) $(DESTDIR)$(libdir) - chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB) - -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1 - -@if test -n "$(SHAREDLIBV)"; then \ - rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ - cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \ - echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \ - chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ - echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \ - rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ - ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \ - ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ - ($(LDCONFIG) || true) >/dev/null 2>&1; \ - fi - rm -f $(DESTDIR)$(man3dir)/zlib.3 - cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir) - chmod 644 $(DESTDIR)$(man3dir)/zlib.3 - rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc - cp zlib.pc $(DESTDIR)$(pkgconfigdir) - chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc -# The ranlib in install is needed on NeXTSTEP which checks file times -# ldconfig is for Linux - -install: install-libs - -@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi - rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h - cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir) - chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h - -uninstall: - cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h - cd $(DESTDIR)$(libdir) && rm -f libz.a; \ - if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \ - rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ - fi - cd $(DESTDIR)$(man3dir) && rm -f zlib.3 - cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc - -docs: zlib.3.pdf - -zlib.3.pdf: $(SRCDIR)zlib.3 - groff -mandoc -f H -T ps $(SRCDIR)zlib.3 | ps2pdf - $@ - -zconf.h.cmakein: $(SRCDIR)zconf.h.in - -@ TEMPFILE=zconfh_$$; \ - echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\ - sed -f $$TEMPFILE $(SRCDIR)zconf.h.in > $@ &&\ - touch -r $(SRCDIR)zconf.h.in $@ &&\ - rm $$TEMPFILE - -zconf: $(SRCDIR)zconf.h.in - cp -p $(SRCDIR)zconf.h.in zconf.h - -mostlyclean: clean -clean: - rm -f *.o *.lo *~ \ - example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \ - example64$(EXE) minigzip64$(EXE) \ - infcover \ - libz.* foo.gz so_locations \ - _match.s maketree contrib/infback9/*.o - rm -rf objs - rm -f *.gcda *.gcno *.gcov - rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov - -maintainer-clean: distclean -distclean: clean zconf zconf.h.cmakein docs - rm -f Makefile zlib.pc configure.log - -@rm -f .DS_Store - @if [ -f Makefile.in ]; then \ - printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile ; \ - printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \ - touch -r $(SRCDIR)Makefile.in Makefile ; fi - @if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi - @if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi - -tags: - etags $(SRCDIR)*.[ch] - -adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h -gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h -compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h -crc32.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h -deflate.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h -infback.o inflate.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h -inffast.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h -inftrees.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h -trees.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h - -adler32.lo zutil.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h -gzclose.lo gzlib.lo gzread.lo gzwrite.lo: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h -compress.lo example.lo minigzip.lo uncompr.lo: $(SRCDIR)zlib.h zconf.h -crc32.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h -deflate.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h -infback.lo inflate.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h -inffast.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h -inftrees.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h -trees.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h diff --git a/deps/zlib-1.2.11/adler32.c b/deps/zlib-1.2.11/adler32.c index d0be438..87ce4c1 100644 --- a/deps/zlib-1.2.11/adler32.c +++ b/deps/zlib-1.2.11/adler32.c @@ -7,8 +7,6 @@ #include "zutil.h" -local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); - #define BASE 65521U /* largest prime smaller than 65536 */ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ @@ -19,45 +17,9 @@ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); #define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); #define DO16(buf) DO8(buf,0); DO8(buf,8); -/* use NO_DIVIDE if your processor does not do division in hardware -- - try it both ways to see which is faster */ -#ifdef NO_DIVIDE -/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 - (thank you to John Reiser for pointing this out) */ -# define CHOP(a) \ - do { \ - unsigned long tmp = a >> 16; \ - a &= 0xffffUL; \ - a += (tmp << 4) - tmp; \ - } while (0) -# define MOD28(a) \ - do { \ - CHOP(a); \ - if (a >= BASE) a -= BASE; \ - } while (0) -# define MOD(a) \ - do { \ - CHOP(a); \ - MOD28(a); \ - } while (0) -# define MOD63(a) \ - do { /* this assumes a is not negative */ \ - z_off64_t tmp = a >> 32; \ - a &= 0xffffffffL; \ - a += (tmp << 8) - (tmp << 5) + tmp; \ - tmp = a >> 16; \ - a &= 0xffffL; \ - a += (tmp << 4) - tmp; \ - tmp = a >> 16; \ - a &= 0xffffL; \ - a += (tmp << 4) - tmp; \ - if (a >= BASE) a -= BASE; \ - } while (0) -#else -# define MOD(a) a %= BASE -# define MOD28(a) a %= BASE -# define MOD63(a) a %= BASE -#endif +#define MOD(a) a %= BASE +#define MOD28(a) a %= BASE +#define MOD63(a) a %= BASE /* ========================================================================= */ uLong ZEXPORT adler32_z(adler, buf, len) @@ -138,49 +100,3 @@ uLong ZEXPORT adler32(adler, buf, len) { return adler32_z(adler, buf, len); } - -/* ========================================================================= */ -local uLong adler32_combine_(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off64_t len2; -{ - unsigned long sum1; - unsigned long sum2; - unsigned rem; - - /* for negative len, return invalid adler32 as a clue for debugging */ - if (len2 < 0) - return 0xffffffffUL; - - /* the derivation of this formula is left as an exercise for the reader */ - MOD63(len2); /* assumes len2 >= 0 */ - rem = (unsigned)len2; - sum1 = adler1 & 0xffff; - sum2 = rem * sum1; - MOD(sum2); - sum1 += (adler2 & 0xffff) + BASE - 1; - sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; - if (sum1 >= BASE) sum1 -= BASE; - if (sum1 >= BASE) sum1 -= BASE; - if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1); - if (sum2 >= BASE) sum2 -= BASE; - return sum1 | (sum2 << 16); -} - -/* ========================================================================= */ -uLong ZEXPORT adler32_combine(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off_t len2; -{ - return adler32_combine_(adler1, adler2, len2); -} - -uLong ZEXPORT adler32_combine64(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off64_t len2; -{ - return adler32_combine_(adler1, adler2, len2); -} diff --git a/deps/zlib-1.2.11/configure b/deps/zlib-1.2.11/configure deleted file mode 100755 index e974d1f..0000000 --- a/deps/zlib-1.2.11/configure +++ /dev/null @@ -1,921 +0,0 @@ -#!/bin/sh -# configure script for zlib. -# -# Normally configure builds both a static and a shared library. -# If you want to build just a static library, use: ./configure --static -# -# To impose specific compiler or flags or install directory, use for example: -# prefix=$HOME CC=cc CFLAGS="-O4" ./configure -# or for csh/tcsh users: -# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure) - -# Incorrect settings of CC or CFLAGS may prevent creating a shared library. -# If you have problems, try without defining CC and CFLAGS before reporting -# an error. - -# start off configure.log -echo -------------------- >> configure.log -echo $0 $* >> configure.log -date >> configure.log - -# get source directory -SRCDIR=`dirname $0` -if test $SRCDIR = "."; then - ZINC="" - ZINCOUT="-I." - SRCDIR="" -else - ZINC='-include zconf.h' - ZINCOUT='-I. -I$(SRCDIR)' - SRCDIR="$SRCDIR/" -fi - -# set command prefix for cross-compilation -if [ -n "${CHOST}" ]; then - uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`" - CROSS_PREFIX="${CHOST}-" -fi - -# destination name for static library -STATICLIB=libz.a - -# extract zlib version numbers from zlib.h -VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h` -VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < ${SRCDIR}zlib.h` -VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h` -VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h` - -# establish commands for library building -if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then - AR=${AR-"${CROSS_PREFIX}ar"} - test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log -else - AR=${AR-"ar"} - test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log -fi -ARFLAGS=${ARFLAGS-"rc"} -if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then - RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"} - test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log -else - RANLIB=${RANLIB-"ranlib"} -fi -if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then - NM=${NM-"${CROSS_PREFIX}nm"} - test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log -else - NM=${NM-"nm"} -fi - -# set defaults before processing command line options -LDCONFIG=${LDCONFIG-"ldconfig"} -LDSHAREDLIBC="${LDSHAREDLIBC--lc}" -ARCHS= -prefix=${prefix-/usr/local} -exec_prefix=${exec_prefix-'${prefix}'} -libdir=${libdir-'${exec_prefix}/lib'} -sharedlibdir=${sharedlibdir-'${libdir}'} -includedir=${includedir-'${prefix}/include'} -mandir=${mandir-'${prefix}/share/man'} -shared_ext='.so' -shared=1 -solo=0 -cover=0 -zprefix=0 -zconst=0 -build64=0 -gcc=0 -warn=0 -debug=0 -old_cc="$CC" -old_cflags="$CFLAGS" -OBJC='$(OBJZ) $(OBJG)' -PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)' - -# leave this script, optionally in a bad way -leave() -{ - if test "$*" != "0"; then - echo "** $0 aborting." | tee -a configure.log - fi - rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version - echo -------------------- >> configure.log - echo >> configure.log - echo >> configure.log - exit $1 -} - -# process command line options -while test $# -ge 1 -do -case "$1" in - -h* | --help) - echo 'usage:' | tee -a configure.log - echo ' configure [--const] [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]' | tee -a configure.log - echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log - echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log - exit 0 ;; - -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;; - -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;; - -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;; - --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;; - -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;; - -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;; - -p* | --prefix) prefix="$2"; shift; shift ;; - -e* | --eprefix) exec_prefix="$2"; shift; shift ;; - -l* | --libdir) libdir="$2"; shift; shift ;; - -i* | --includedir) includedir="$2"; shift; shift ;; - -s* | --shared | --enable-shared) shared=1; shift ;; - -t | --static) shared=0; shift ;; - --solo) solo=1; shift ;; - --cover) cover=1; shift ;; - -z* | --zprefix) zprefix=1; shift ;; - -6* | --64) build64=1; shift ;; - -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;; - --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;; - --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;; - -c* | --const) zconst=1; shift ;; - -w* | --warn) warn=1; shift ;; - -d* | --debug) debug=1; shift ;; - *) - echo "unknown option: $1" | tee -a configure.log - echo "$0 --help for help" | tee -a configure.log - leave 1;; - esac -done - -# temporary file name -test=ztest$$ - -# put arguments in log, also put test file in log if used in arguments -show() -{ - case "$*" in - *$test.c*) - echo === $test.c === >> configure.log - cat $test.c >> configure.log - echo === >> configure.log;; - esac - echo $* >> configure.log -} - -# check for gcc vs. cc and set compile and link flags based on the system identified by uname -cat > $test.c <&1` in - *gcc*) gcc=1 ;; - *clang*) gcc=1 ;; -esac - -show $cc -c $test.c -if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then - echo ... using gcc >> configure.log - CC="$cc" - CFLAGS="${CFLAGS--O3}" - SFLAGS="${CFLAGS--O3} -fPIC" - if test "$ARCHS"; then - CFLAGS="${CFLAGS} ${ARCHS}" - LDFLAGS="${LDFLAGS} ${ARCHS}" - fi - if test $build64 -eq 1; then - CFLAGS="${CFLAGS} -m64" - SFLAGS="${SFLAGS} -m64" - fi - if test "$warn" -eq 1; then - if test "$zconst" -eq 1; then - CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST" - else - CFLAGS="${CFLAGS} -Wall -Wextra -pedantic" - fi - fi - if test $debug -eq 1; then - CFLAGS="${CFLAGS} -DZLIB_DEBUG" - SFLAGS="${SFLAGS} -DZLIB_DEBUG" - fi - if test -z "$uname"; then - uname=`(uname -s || echo unknown) 2>/dev/null` - fi - case "$uname" in - Linux* | linux* | GNU | GNU/* | solaris*) - LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"} ;; - *BSD | *bsd* | DragonFly) - LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"} - LDCONFIG="ldconfig -m" ;; - CYGWIN* | Cygwin* | cygwin* | OS/2*) - EXE='.exe' ;; - MINGW* | mingw*) -# temporary bypass - rm -f $test.[co] $test $test$shared_ext - echo "Please use win32/Makefile.gcc instead." | tee -a configure.log - leave 1 - LDSHARED=${LDSHARED-"$cc -shared"} - LDSHAREDLIBC="" - EXE='.exe' ;; - QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4 - # (alain.bonnefoy@icbt.com) - LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;; - HP-UX*) - LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"} - case `(uname -m || echo unknown) 2>/dev/null` in - ia64) - shared_ext='.so' - SHAREDLIB='libz.so' ;; - *) - shared_ext='.sl' - SHAREDLIB='libz.sl' ;; - esac ;; - Darwin* | darwin*) - shared_ext='.dylib' - SHAREDLIB=libz$shared_ext - SHAREDLIBV=libz.$VER$shared_ext - SHAREDLIBM=libz.$VER1$shared_ext - LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} - if libtool -V 2>&1 | grep Apple > /dev/null; then - AR="libtool" - else - AR="/usr/bin/libtool" - fi - ARFLAGS="-o" ;; - *) LDSHARED=${LDSHARED-"$cc -shared"} ;; - esac -else - # find system name and corresponding cc options - CC=${CC-cc} - gcc=0 - echo ... using $CC >> configure.log - if test -z "$uname"; then - uname=`(uname -sr || echo unknown) 2>/dev/null` - fi - case "$uname" in - HP-UX*) SFLAGS=${CFLAGS-"-O +z"} - CFLAGS=${CFLAGS-"-O"} -# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"} - LDSHARED=${LDSHARED-"ld -b"} - case `(uname -m || echo unknown) 2>/dev/null` in - ia64) - shared_ext='.so' - SHAREDLIB='libz.so' ;; - *) - shared_ext='.sl' - SHAREDLIB='libz.sl' ;; - esac ;; - IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."} - CFLAGS=${CFLAGS-"-ansi -O2"} - LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; - OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"} - CFLAGS=${CFLAGS-"-O -std1"} - LDFLAGS="${LDFLAGS} -Wl,-rpath,." - LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;; - OSF1*) SFLAGS=${CFLAGS-"-O -std1"} - CFLAGS=${CFLAGS-"-O -std1"} - LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; - QNX*) SFLAGS=${CFLAGS-"-4 -O"} - CFLAGS=${CFLAGS-"-4 -O"} - LDSHARED=${LDSHARED-"cc"} - RANLIB=${RANLIB-"true"} - AR="cc" - ARFLAGS="-A" ;; - SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "} - CFLAGS=${CFLAGS-"-O3"} - LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;; - SunOS\ 5* | solaris*) - LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"} - SFLAGS=${CFLAGS-"-fast -KPIC"} - CFLAGS=${CFLAGS-"-fast"} - if test $build64 -eq 1; then - # old versions of SunPRO/Workshop/Studio don't support -m64, - # but newer ones do. Check for it. - flag64=`$CC -flags | egrep -- '^-m64'` - if test x"$flag64" != x"" ; then - CFLAGS="${CFLAGS} -m64" - SFLAGS="${SFLAGS} -m64" - else - case `(uname -m || echo unknown) 2>/dev/null` in - i86*) - SFLAGS="$SFLAGS -xarch=amd64" - CFLAGS="$CFLAGS -xarch=amd64" ;; - *) - SFLAGS="$SFLAGS -xarch=v9" - CFLAGS="$CFLAGS -xarch=v9" ;; - esac - fi - fi - if test -n "$ZINC"; then - ZINC='-I- -I. -I$(SRCDIR)' - fi - ;; - SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"} - CFLAGS=${CFLAGS-"-O2"} - LDSHARED=${LDSHARED-"ld"} ;; - SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"} - CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"} - LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;; - UNIX_System_V\ 4.2.0) - SFLAGS=${CFLAGS-"-KPIC -O"} - CFLAGS=${CFLAGS-"-O"} - LDSHARED=${LDSHARED-"cc -G"} ;; - UNIX_SV\ 4.2MP) - SFLAGS=${CFLAGS-"-Kconform_pic -O"} - CFLAGS=${CFLAGS-"-O"} - LDSHARED=${LDSHARED-"cc -G"} ;; - OpenUNIX\ 5) - SFLAGS=${CFLAGS-"-KPIC -O"} - CFLAGS=${CFLAGS-"-O"} - LDSHARED=${LDSHARED-"cc -G"} ;; - AIX*) # Courtesy of dbakker@arrayasolutions.com - SFLAGS=${CFLAGS-"-O -qmaxmem=8192"} - CFLAGS=${CFLAGS-"-O -qmaxmem=8192"} - LDSHARED=${LDSHARED-"xlc -G"} ;; - # send working options for other systems to zlib@gzip.org - *) SFLAGS=${CFLAGS-"-O"} - CFLAGS=${CFLAGS-"-O"} - LDSHARED=${LDSHARED-"cc -shared"} ;; - esac -fi - -# destination names for shared library if not defined above -SHAREDLIB=${SHAREDLIB-"libz$shared_ext"} -SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"} -SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"} - -echo >> configure.log - -# define functions for testing compiler and library characteristics and logging the results - -cat > $test.c </dev/null; then - try() - { - show $* - test "`( $* ) 2>&1 | tee -a configure.log`" = "" - } - echo - using any output from compiler to indicate an error >> configure.log -else - try() - { - show $* - ( $* ) >> configure.log 2>&1 - ret=$? - if test $ret -ne 0; then - echo "(exit code "$ret")" >> configure.log - fi - return $ret - } -fi - -tryboth() -{ - show $* - got=`( $* ) 2>&1` - ret=$? - printf %s "$got" >> configure.log - if test $ret -ne 0; then - return $ret - fi - test "$got" = "" -} - -cat > $test.c << EOF -int foo() { return 0; } -EOF -echo "Checking for obsessive-compulsive compiler options..." >> configure.log -if try $CC -c $CFLAGS $test.c; then - : -else - echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log - leave 1 -fi - -echo >> configure.log - -# see if shared library build supported -cat > $test.c <> configure.log - show "$NM $test.o | grep _hello" - if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then - CPP="$CPP -DNO_UNDERLINE" - echo Checking for underline in external names... No. | tee -a configure.log - else - echo Checking for underline in external names... Yes. | tee -a configure.log - fi ;; -esac - -echo >> configure.log - -# check for size_t -cat > $test.c < -#include -size_t dummy = 0; -EOF -if try $CC -c $CFLAGS $test.c; then - echo "Checking for size_t... Yes." | tee -a configure.log - need_sizet=0 -else - echo "Checking for size_t... No." | tee -a configure.log - need_sizet=1 -fi - -echo >> configure.log - -# find the size_t integer type, if needed -if test $need_sizet -eq 1; then - cat > $test.c < $test.c < -int main(void) { - if (sizeof(void *) <= sizeof(int)) puts("int"); - else if (sizeof(void *) <= sizeof(long)) puts("long"); - else puts("z_longlong"); - return 0; -} -EOF - else - echo "Checking for long long... No." | tee -a configure.log - cat > $test.c < -int main(void) { - if (sizeof(void *) <= sizeof(int)) puts("int"); - else puts("long"); - return 0; -} -EOF - fi - if try $CC $CFLAGS -o $test $test.c; then - sizet=`./$test` - echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log - else - echo "Failed to find a pointer-size integer type." | tee -a configure.log - leave 1 - fi -fi - -if test $need_sizet -eq 1; then - CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}" - SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}" -fi - -echo >> configure.log - -# check for large file support, and if none, check for fseeko() -cat > $test.c < -off64_t dummy = 0; -EOF -if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then - CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1" - SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1" - ALL="${ALL} all64" - TEST="${TEST} test64" - echo "Checking for off64_t... Yes." | tee -a configure.log - echo "Checking for fseeko... Yes." | tee -a configure.log -else - echo "Checking for off64_t... No." | tee -a configure.log - echo >> configure.log - cat > $test.c < -int main(void) { - fseeko(NULL, 0, 0); - return 0; -} -EOF - if try $CC $CFLAGS -o $test $test.c; then - echo "Checking for fseeko... Yes." | tee -a configure.log - else - CFLAGS="${CFLAGS} -DNO_FSEEKO" - SFLAGS="${SFLAGS} -DNO_FSEEKO" - echo "Checking for fseeko... No." | tee -a configure.log - fi -fi - -echo >> configure.log - -# check for strerror() for use by gz* functions -cat > $test.c < -#include -int main() { return strlen(strerror(errno)); } -EOF -if try $CC $CFLAGS -o $test $test.c; then - echo "Checking for strerror... Yes." | tee -a configure.log -else - CFLAGS="${CFLAGS} -DNO_STRERROR" - SFLAGS="${SFLAGS} -DNO_STRERROR" - echo "Checking for strerror... No." | tee -a configure.log -fi - -# copy clean zconf.h for subsequent edits -cp -p ${SRCDIR}zconf.h.in zconf.h - -echo >> configure.log - -# check for unistd.h and save result in zconf.h -cat > $test.c < -int main() { return 0; } -EOF -if try $CC -c $CFLAGS $test.c; then - sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h - mv zconf.temp.h zconf.h - echo "Checking for unistd.h... Yes." | tee -a configure.log -else - echo "Checking for unistd.h... No." | tee -a configure.log -fi - -echo >> configure.log - -# check for stdarg.h and save result in zconf.h -cat > $test.c < -int main() { return 0; } -EOF -if try $CC -c $CFLAGS $test.c; then - sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h - mv zconf.temp.h zconf.h - echo "Checking for stdarg.h... Yes." | tee -a configure.log -else - echo "Checking for stdarg.h... No." | tee -a configure.log -fi - -# if the z_ prefix was requested, save that in zconf.h -if test $zprefix -eq 1; then - sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h - mv zconf.temp.h zconf.h - echo >> configure.log - echo "Using z_ prefix on all symbols." | tee -a configure.log -fi - -# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists -if test $solo -eq 1; then - sed '/#define ZCONF_H/a\ -#define Z_SOLO - -' < zconf.h > zconf.temp.h - mv zconf.temp.h zconf.h -OBJC='$(OBJZ)' -PIC_OBJC='$(PIC_OBJZ)' -fi - -# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X -if test $cover -eq 1; then - CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage" - if test -n "$GCC_CLASSIC"; then - CC=$GCC_CLASSIC - fi -fi - -echo >> configure.log - -# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions -# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a -# return value. The most secure result is vsnprintf() with a return value. snprintf() with a -# return value is secure as well, but then gzprintf() will be limited to 20 arguments. -cat > $test.c < -#include -#include "zconf.h" -int main() -{ -#ifndef STDC - choke me -#endif - return 0; -} -EOF -if try $CC -c $CFLAGS $test.c; then - echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log - - echo >> configure.log - cat > $test.c < -#include -int mytest(const char *fmt, ...) -{ - char buf[20]; - va_list ap; - va_start(ap, fmt); - vsnprintf(buf, sizeof(buf), fmt, ap); - va_end(ap); - return 0; -} -int main() -{ - return (mytest("Hello%d\n", 1)); -} -EOF - if try $CC $CFLAGS -o $test $test.c; then - echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log - - echo >> configure.log - cat >$test.c < -#include -int mytest(const char *fmt, ...) -{ - int n; - char buf[20]; - va_list ap; - va_start(ap, fmt); - n = vsnprintf(buf, sizeof(buf), fmt, ap); - va_end(ap); - return n; -} -int main() -{ - return (mytest("Hello%d\n", 1)); -} -EOF - - if try $CC -c $CFLAGS $test.c; then - echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log - else - CFLAGS="$CFLAGS -DHAS_vsnprintf_void" - SFLAGS="$SFLAGS -DHAS_vsnprintf_void" - echo "Checking for return value of vsnprintf()... No." | tee -a configure.log - echo " WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log - echo " can build but will be open to possible string-format security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - fi - else - CFLAGS="$CFLAGS -DNO_vsnprintf" - SFLAGS="$SFLAGS -DNO_vsnprintf" - echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log - echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log - echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - - echo >> configure.log - cat >$test.c < -#include -int mytest(const char *fmt, ...) -{ - int n; - char buf[20]; - va_list ap; - va_start(ap, fmt); - n = vsprintf(buf, fmt, ap); - va_end(ap); - return n; -} -int main() -{ - return (mytest("Hello%d\n", 1)); -} -EOF - - if try $CC -c $CFLAGS $test.c; then - echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log - else - CFLAGS="$CFLAGS -DHAS_vsprintf_void" - SFLAGS="$SFLAGS -DHAS_vsprintf_void" - echo "Checking for return value of vsprintf()... No." | tee -a configure.log - echo " WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log - echo " can build but will be open to possible string-format security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - fi - fi -else - echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log - - echo >> configure.log - cat >$test.c < -int mytest() -{ - char buf[20]; - snprintf(buf, sizeof(buf), "%s", "foo"); - return 0; -} -int main() -{ - return (mytest()); -} -EOF - - if try $CC $CFLAGS -o $test $test.c; then - echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log - - echo >> configure.log - cat >$test.c < -int mytest() -{ - char buf[20]; - return snprintf(buf, sizeof(buf), "%s", "foo"); -} -int main() -{ - return (mytest()); -} -EOF - - if try $CC -c $CFLAGS $test.c; then - echo "Checking for return value of snprintf()... Yes." | tee -a configure.log - else - CFLAGS="$CFLAGS -DHAS_snprintf_void" - SFLAGS="$SFLAGS -DHAS_snprintf_void" - echo "Checking for return value of snprintf()... No." | tee -a configure.log - echo " WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log - echo " can build but will be open to possible string-format security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - fi - else - CFLAGS="$CFLAGS -DNO_snprintf" - SFLAGS="$SFLAGS -DNO_snprintf" - echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log - echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log - echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - - echo >> configure.log - cat >$test.c < -int mytest() -{ - char buf[20]; - return sprintf(buf, "%s", "foo"); -} -int main() -{ - return (mytest()); -} -EOF - - if try $CC -c $CFLAGS $test.c; then - echo "Checking for return value of sprintf()... Yes." | tee -a configure.log - else - CFLAGS="$CFLAGS -DHAS_sprintf_void" - SFLAGS="$SFLAGS -DHAS_sprintf_void" - echo "Checking for return value of sprintf()... No." | tee -a configure.log - echo " WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log - echo " can build but will be open to possible string-format security" | tee -a configure.log - echo " vulnerabilities." | tee -a configure.log - fi - fi -fi - -# see if we can hide zlib internal symbols that are linked between separate source files -if test "$gcc" -eq 1; then - echo >> configure.log - cat > $test.c <> configure.log -echo ALL = $ALL >> configure.log -echo AR = $AR >> configure.log -echo ARFLAGS = $ARFLAGS >> configure.log -echo CC = $CC >> configure.log -echo CFLAGS = $CFLAGS >> configure.log -echo CPP = $CPP >> configure.log -echo EXE = $EXE >> configure.log -echo LDCONFIG = $LDCONFIG >> configure.log -echo LDFLAGS = $LDFLAGS >> configure.log -echo LDSHARED = $LDSHARED >> configure.log -echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log -echo OBJC = $OBJC >> configure.log -echo PIC_OBJC = $PIC_OBJC >> configure.log -echo RANLIB = $RANLIB >> configure.log -echo SFLAGS = $SFLAGS >> configure.log -echo SHAREDLIB = $SHAREDLIB >> configure.log -echo SHAREDLIBM = $SHAREDLIBM >> configure.log -echo SHAREDLIBV = $SHAREDLIBV >> configure.log -echo STATICLIB = $STATICLIB >> configure.log -echo TEST = $TEST >> configure.log -echo VER = $VER >> configure.log -echo Z_U4 = $Z_U4 >> configure.log -echo SRCDIR = $SRCDIR >> configure.log -echo exec_prefix = $exec_prefix >> configure.log -echo includedir = $includedir >> configure.log -echo libdir = $libdir >> configure.log -echo mandir = $mandir >> configure.log -echo prefix = $prefix >> configure.log -echo sharedlibdir = $sharedlibdir >> configure.log -echo uname = $uname >> configure.log - -# udpate Makefile with the configure results -sed < ${SRCDIR}Makefile.in " -/^CC *=/s#=.*#=$CC# -/^CFLAGS *=/s#=.*#=$CFLAGS# -/^SFLAGS *=/s#=.*#=$SFLAGS# -/^LDFLAGS *=/s#=.*#=$LDFLAGS# -/^LDSHARED *=/s#=.*#=$LDSHARED# -/^CPP *=/s#=.*#=$CPP# -/^STATICLIB *=/s#=.*#=$STATICLIB# -/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# -/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# -/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# -/^AR *=/s#=.*#=$AR# -/^ARFLAGS *=/s#=.*#=$ARFLAGS# -/^RANLIB *=/s#=.*#=$RANLIB# -/^LDCONFIG *=/s#=.*#=$LDCONFIG# -/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC# -/^EXE *=/s#=.*#=$EXE# -/^SRCDIR *=/s#=.*#=$SRCDIR# -/^ZINC *=/s#=.*#=$ZINC# -/^ZINCOUT *=/s#=.*#=$ZINCOUT# -/^prefix *=/s#=.*#=$prefix# -/^exec_prefix *=/s#=.*#=$exec_prefix# -/^libdir *=/s#=.*#=$libdir# -/^sharedlibdir *=/s#=.*#=$sharedlibdir# -/^includedir *=/s#=.*#=$includedir# -/^mandir *=/s#=.*#=$mandir# -/^OBJC *=/s#=.*#= $OBJC# -/^PIC_OBJC *=/s#=.*#= $PIC_OBJC# -/^all: */s#:.*#: $ALL# -/^test: */s#:.*#: $TEST# -" > Makefile - -# create zlib.pc with the configure results -sed < ${SRCDIR}zlib.pc.in " -/^CC *=/s#=.*#=$CC# -/^CFLAGS *=/s#=.*#=$CFLAGS# -/^CPP *=/s#=.*#=$CPP# -/^LDSHARED *=/s#=.*#=$LDSHARED# -/^STATICLIB *=/s#=.*#=$STATICLIB# -/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# -/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# -/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# -/^AR *=/s#=.*#=$AR# -/^ARFLAGS *=/s#=.*#=$ARFLAGS# -/^RANLIB *=/s#=.*#=$RANLIB# -/^EXE *=/s#=.*#=$EXE# -/^prefix *=/s#=.*#=$prefix# -/^exec_prefix *=/s#=.*#=$exec_prefix# -/^libdir *=/s#=.*#=$libdir# -/^sharedlibdir *=/s#=.*#=$sharedlibdir# -/^includedir *=/s#=.*#=$includedir# -/^mandir *=/s#=.*#=$mandir# -/^LDFLAGS *=/s#=.*#=$LDFLAGS# -" | sed -e " -s/\@VERSION\@/$VER/g; -" > zlib.pc - -# done -leave 0 diff --git a/deps/zlib-1.2.11/crc32.c b/deps/zlib-1.2.11/crc32.c index 0d30913..30e0fdf 100644 --- a/deps/zlib-1.2.11/crc32.c +++ b/deps/zlib-1.2.11/crc32.c @@ -14,63 +14,26 @@ #include "zutil.h" /* for STDC and FAR definitions */ /* Definitions for doing the crc four data bytes at a time. */ -#if !defined(NOBYFOUR) && defined(Z_U4) -# define BYFOUR -#endif -#ifdef BYFOUR - local unsigned long crc32_little OF((unsigned long, - const unsigned char FAR *, z_size_t)); - local unsigned long crc32_big OF((unsigned long, - const unsigned char FAR *, z_size_t)); -# define TBLS 8 -#else -# define TBLS 1 -#endif /* BYFOUR */ - -/* Local functions for crc concatenation */ -local unsigned long gf2_matrix_times OF((unsigned long *mat, - unsigned long vec)); -local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); -local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); - +#define TBLS 1 /* ======================================================================== * Tables of CRC-32s of all single-byte values, made by make_crc_table(). */ #include "crc32.h" -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const z_crc_t FAR * ZEXPORT get_crc_table() -{ - return (const z_crc_t FAR *)crc_table; -} - /* ========================================================================= */ #define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 /* ========================================================================= */ -unsigned long ZEXPORT crc32_z(crc, buf, len) +unsigned long ZEXPORT crc32(crc, buf, len) unsigned long crc; const unsigned char FAR *buf; - z_size_t len; + uInt len; { - if (buf == Z_NULL) return 0UL; + if (buf == Z_NULL) + return 0UL; - -#ifdef BYFOUR - if (sizeof(void *) == sizeof(ptrdiff_t)) { - z_crc_t endian; - - endian = 1; - if (*((unsigned char *)(&endian))) - return crc32_little(crc, buf, len); - else - return crc32_big(crc, buf, len); - } -#endif /* BYFOUR */ crc = crc ^ 0xffffffffUL; while (len >= 8) { DO8; @@ -81,211 +44,3 @@ unsigned long ZEXPORT crc32_z(crc, buf, len) } while (--len); return crc ^ 0xffffffffUL; } - -/* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - uInt len; -{ - return crc32_z(crc, buf, len); -} - -#ifdef BYFOUR - -/* - This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit - integer pointer type. This violates the strict aliasing rule, where a - compiler can assume, for optimization purposes, that two pointers to - fundamentally different types won't ever point to the same memory. This can - manifest as a problem only if one of the pointers is written to. This code - only reads from those pointers. So long as this code remains isolated in - this compilation unit, there won't be a problem. For this reason, this code - should not be copied and pasted into a compilation unit in which other code - writes to the buffer that is passed to these routines. - */ - -/* ========================================================================= */ -#define DOLIT4 c ^= *buf4++; \ - c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ - crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] -#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 - -/* ========================================================================= */ -local unsigned long crc32_little(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - z_size_t len; -{ - register z_crc_t c; - register const z_crc_t FAR *buf4; - - c = (z_crc_t)crc; - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - len--; - } - - buf4 = (const z_crc_t FAR *)(const void FAR *)buf; - while (len >= 32) { - DOLIT32; - len -= 32; - } - while (len >= 4) { - DOLIT4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - } while (--len); - c = ~c; - return (unsigned long)c; -} - -/* ========================================================================= */ -#define DOBIG4 c ^= *buf4++; \ - c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ - crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] -#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 - -/* ========================================================================= */ -local unsigned long crc32_big(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - z_size_t len; -{ - register z_crc_t c; - register const z_crc_t FAR *buf4; - - c = ZSWAP32((z_crc_t)crc); - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - len--; - } - - buf4 = (const z_crc_t FAR *)(const void FAR *)buf; - while (len >= 32) { - DOBIG32; - len -= 32; - } - while (len >= 4) { - DOBIG4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - } while (--len); - c = ~c; - return (unsigned long)(ZSWAP32(c)); -} - -#endif /* BYFOUR */ - -#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ - -/* ========================================================================= */ -local unsigned long gf2_matrix_times(mat, vec) - unsigned long *mat; - unsigned long vec; -{ - unsigned long sum; - - sum = 0; - while (vec) { - if (vec & 1) - sum ^= *mat; - vec >>= 1; - mat++; - } - return sum; -} - -/* ========================================================================= */ -local void gf2_matrix_square(square, mat) - unsigned long *square; - unsigned long *mat; -{ - int n; - - for (n = 0; n < GF2_DIM; n++) - square[n] = gf2_matrix_times(mat, mat[n]); -} - -/* ========================================================================= */ -local uLong crc32_combine_(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off64_t len2; -{ - int n; - unsigned long row; - unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ - unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ - - /* degenerate case (also disallow negative lengths) */ - if (len2 <= 0) - return crc1; - - /* put operator for one zero bit in odd */ - odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ - row = 1; - for (n = 1; n < GF2_DIM; n++) { - odd[n] = row; - row <<= 1; - } - - /* put operator for two zero bits in even */ - gf2_matrix_square(even, odd); - - /* put operator for four zero bits in odd */ - gf2_matrix_square(odd, even); - - /* apply len2 zeros to crc1 (first square will put the operator for one - zero byte, eight zero bits, in even) */ - do { - /* apply zeros operator for this bit of len2 */ - gf2_matrix_square(even, odd); - if (len2 & 1) - crc1 = gf2_matrix_times(even, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - if (len2 == 0) - break; - - /* another iteration of the loop with odd and even swapped */ - gf2_matrix_square(odd, even); - if (len2 & 1) - crc1 = gf2_matrix_times(odd, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - } while (len2 != 0); - - /* return combined crc */ - crc1 ^= crc2; - return crc1; -} - -/* ========================================================================= */ -uLong ZEXPORT crc32_combine(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off_t len2; -{ - return crc32_combine_(crc1, crc2, len2); -} - -uLong ZEXPORT crc32_combine64(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off64_t len2; -{ - return crc32_combine_(crc1, crc2, len2); -} diff --git a/deps/zlib-1.2.11/doc/algorithm.txt b/deps/zlib-1.2.11/doc/algorithm.txt deleted file mode 100644 index c97f495..0000000 --- a/deps/zlib-1.2.11/doc/algorithm.txt +++ /dev/null @@ -1,209 +0,0 @@ -1. Compression algorithm (deflate) - -The deflation algorithm used by gzip (also zip and zlib) is a variation of -LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in -the input data. The second occurrence of a string is replaced by a -pointer to the previous string, in the form of a pair (distance, -length). Distances are limited to 32K bytes, and lengths are limited -to 258 bytes. When a string does not occur anywhere in the previous -32K bytes, it is emitted as a sequence of literal bytes. (In this -description, `string' must be taken as an arbitrary sequence of bytes, -and is not restricted to printable characters.) - -Literals or match lengths are compressed with one Huffman tree, and -match distances are compressed with another tree. The trees are stored -in a compact form at the start of each block. The blocks can have any -size (except that the compressed data for one block must fit in -available memory). A block is terminated when deflate() determines that -it would be useful to start another block with fresh trees. (This is -somewhat similar to the behavior of LZW-based _compress_.) - -Duplicated strings are found using a hash table. All input strings of -length 3 are inserted in the hash table. A hash index is computed for -the next 3 bytes. If the hash chain for this index is not empty, all -strings in the chain are compared with the current input string, and -the longest match is selected. - -The hash chains are searched starting with the most recent strings, to -favor small distances and thus take advantage of the Huffman encoding. -The hash chains are singly linked. There are no deletions from the -hash chains, the algorithm simply discards matches that are too old. - -To avoid a worst-case situation, very long hash chains are arbitrarily -truncated at a certain length, determined by a runtime option (level -parameter of deflateInit). So deflate() does not always find the longest -possible match but generally finds a match which is long enough. - -deflate() also defers the selection of matches with a lazy evaluation -mechanism. After a match of length N has been found, deflate() searches for -a longer match at the next input byte. If a longer match is found, the -previous match is truncated to a length of one (thus producing a single -literal byte) and the process of lazy evaluation begins again. Otherwise, -the original match is kept, and the next match search is attempted only N -steps later. - -The lazy match evaluation is also subject to a runtime parameter. If -the current match is long enough, deflate() reduces the search for a longer -match, thus speeding up the whole process. If compression ratio is more -important than speed, deflate() attempts a complete second search even if -the first match is already long enough. - -The lazy match evaluation is not performed for the fastest compression -modes (level parameter 1 to 3). For these fast modes, new strings -are inserted in the hash table only when no match was found, or -when the match is not too long. This degrades the compression ratio -but saves time since there are both fewer insertions and fewer searches. - - -2. Decompression algorithm (inflate) - -2.1 Introduction - -The key question is how to represent a Huffman code (or any prefix code) so -that you can decode fast. The most important characteristic is that shorter -codes are much more common than longer codes, so pay attention to decoding the -short codes fast, and let the long codes take longer to decode. - -inflate() sets up a first level table that covers some number of bits of -input less than the length of longest code. It gets that many bits from the -stream, and looks it up in the table. The table will tell if the next -code is that many bits or less and how many, and if it is, it will tell -the value, else it will point to the next level table for which inflate() -grabs more bits and tries to decode a longer code. - -How many bits to make the first lookup is a tradeoff between the time it -takes to decode and the time it takes to build the table. If building the -table took no time (and if you had infinite memory), then there would only -be a first level table to cover all the way to the longest code. However, -building the table ends up taking a lot longer for more bits since short -codes are replicated many times in such a table. What inflate() does is -simply to make the number of bits in the first table a variable, and then -to set that variable for the maximum speed. - -For inflate, which has 286 possible codes for the literal/length tree, the size -of the first table is nine bits. Also the distance trees have 30 possible -values, and the size of the first table is six bits. Note that for each of -those cases, the table ended up one bit longer than the ``average'' code -length, i.e. the code length of an approximately flat code which would be a -little more than eight bits for 286 symbols and a little less than five bits -for 30 symbols. - - -2.2 More details on the inflate table lookup - -Ok, you want to know what this cleverly obfuscated inflate tree actually -looks like. You are correct that it's not a Huffman tree. It is simply a -lookup table for the first, let's say, nine bits of a Huffman symbol. The -symbol could be as short as one bit or as long as 15 bits. If a particular -symbol is shorter than nine bits, then that symbol's translation is duplicated -in all those entries that start with that symbol's bits. For example, if the -symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a -symbol is nine bits long, it appears in the table once. - -If the symbol is longer than nine bits, then that entry in the table points -to another similar table for the remaining bits. Again, there are duplicated -entries as needed. The idea is that most of the time the symbol will be short -and there will only be one table look up. (That's whole idea behind data -compression in the first place.) For the less frequent long symbols, there -will be two lookups. If you had a compression method with really long -symbols, you could have as many levels of lookups as is efficient. For -inflate, two is enough. - -So a table entry either points to another table (in which case nine bits in -the above example are gobbled), or it contains the translation for the symbol -and the number of bits to gobble. Then you start again with the next -ungobbled bit. - -You may wonder: why not just have one lookup table for how ever many bits the -longest symbol is? The reason is that if you do that, you end up spending -more time filling in duplicate symbol entries than you do actually decoding. -At least for deflate's output that generates new trees every several 10's of -kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code -would take too long if you're only decoding several thousand symbols. At the -other extreme, you could make a new table for every bit in the code. In fact, -that's essentially a Huffman tree. But then you spend too much time -traversing the tree while decoding, even for short symbols. - -So the number of bits for the first lookup table is a trade of the time to -fill out the table vs. the time spent looking at the second level and above of -the table. - -Here is an example, scaled down: - -The code being decoded, with 10 symbols, from 1 to 6 bits long: - -A: 0 -B: 10 -C: 1100 -D: 11010 -E: 11011 -F: 11100 -G: 11101 -H: 11110 -I: 111110 -J: 111111 - -Let's make the first table three bits long (eight entries): - -000: A,1 -001: A,1 -010: A,1 -011: A,1 -100: B,2 -101: B,2 -110: -> table X (gobble 3 bits) -111: -> table Y (gobble 3 bits) - -Each entry is what the bits decode as and how many bits that is, i.e. how -many bits to gobble. Or the entry points to another table, with the number of -bits to gobble implicit in the size of the table. - -Table X is two bits long since the longest code starting with 110 is five bits -long: - -00: C,1 -01: C,1 -10: D,2 -11: E,2 - -Table Y is three bits long since the longest code starting with 111 is six -bits long: - -000: F,2 -001: F,2 -010: G,2 -011: G,2 -100: H,2 -101: H,2 -110: I,3 -111: J,3 - -So what we have here are three tables with a total of 20 entries that had to -be constructed. That's compared to 64 entries for a single table. Or -compared to 16 entries for a Huffman tree (six two entry tables and one four -entry table). Assuming that the code ideally represents the probability of -the symbols, it takes on the average 1.25 lookups per symbol. That's compared -to one lookup for the single table, or 1.66 lookups per symbol for the -Huffman tree. - -There, I think that gives you a picture of what's going on. For inflate, the -meaning of a particular symbol is often more than just a letter. It can be a -byte (a "literal"), or it can be either a length or a distance which -indicates a base value and a number of bits to fetch after the code that is -added to the base value. Or it might be the special end-of-block code. The -data structures created in inftrees.c try to encode all that information -compactly in the tables. - - -Jean-loup Gailly Mark Adler -jloup@gzip.org madler@alumni.caltech.edu - - -References: - -[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data -Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3, -pp. 337-343. - -``DEFLATE Compressed Data Format Specification'' available in -http://tools.ietf.org/html/rfc1951 diff --git a/deps/zlib-1.2.11/doc/rfc1950.txt b/deps/zlib-1.2.11/doc/rfc1950.txt deleted file mode 100644 index ce6428a..0000000 --- a/deps/zlib-1.2.11/doc/rfc1950.txt +++ /dev/null @@ -1,619 +0,0 @@ - - - - - - -Network Working Group P. Deutsch -Request for Comments: 1950 Aladdin Enterprises -Category: Informational J-L. Gailly - Info-ZIP - May 1996 - - - ZLIB Compressed Data Format Specification version 3.3 - -Status of This Memo - - This memo provides information for the Internet community. This memo - does not specify an Internet standard of any kind. Distribution of - this memo is unlimited. - -IESG Note: - - The IESG takes no position on the validity of any Intellectual - Property Rights statements contained in this document. - -Notices - - Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly - - Permission is granted to copy and distribute this document for any - purpose and without charge, including translations into other - languages and incorporation into compilations, provided that the - copyright notice and this notice are preserved, and that any - substantive changes or deletions from the original are clearly - marked. - - A pointer to the latest version of this and related documentation in - HTML format can be found at the URL - . - -Abstract - - This specification defines a lossless compressed data format. The - data can be produced or consumed, even for an arbitrarily long - sequentially presented input data stream, using only an a priori - bounded amount of intermediate storage. The format presently uses - the DEFLATE compression method but can be easily extended to use - other compression methods. It can be implemented readily in a manner - not covered by patents. This specification also defines the ADLER-32 - checksum (an extension and improvement of the Fletcher checksum), - used for detection of data corruption, and provides an algorithm for - computing it. - - - - -Deutsch & Gailly Informational [Page 1] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - -Table of Contents - - 1. Introduction ................................................... 2 - 1.1. Purpose ................................................... 2 - 1.2. Intended audience ......................................... 3 - 1.3. Scope ..................................................... 3 - 1.4. Compliance ................................................ 3 - 1.5. Definitions of terms and conventions used ................ 3 - 1.6. Changes from previous versions ............................ 3 - 2. Detailed specification ......................................... 3 - 2.1. Overall conventions ....................................... 3 - 2.2. Data format ............................................... 4 - 2.3. Compliance ................................................ 7 - 3. References ..................................................... 7 - 4. Source code .................................................... 8 - 5. Security Considerations ........................................ 8 - 6. Acknowledgements ............................................... 8 - 7. Authors' Addresses ............................................. 8 - 8. Appendix: Rationale ............................................ 9 - 9. Appendix: Sample code ..........................................10 - -1. Introduction - - 1.1. Purpose - - The purpose of this specification is to define a lossless - compressed data format that: - - * Is independent of CPU type, operating system, file system, - and character set, and hence can be used for interchange; - - * Can be produced or consumed, even for an arbitrarily long - sequentially presented input data stream, using only an a - priori bounded amount of intermediate storage, and hence can - be used in data communications or similar structures such as - Unix filters; - - * Can use a number of different compression methods; - - * Can be implemented readily in a manner not covered by - patents, and hence can be practiced freely. - - The data format defined by this specification does not attempt to - allow random access to compressed data. - - - - - - - -Deutsch & Gailly Informational [Page 2] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - 1.2. Intended audience - - This specification is intended for use by implementors of software - to compress data into zlib format and/or decompress data from zlib - format. - - The text of the specification assumes a basic background in - programming at the level of bits and other primitive data - representations. - - 1.3. Scope - - The specification specifies a compressed data format that can be - used for in-memory compression of a sequence of arbitrary bytes. - - 1.4. Compliance - - Unless otherwise indicated below, a compliant decompressor must be - able to accept and decompress any data set that conforms to all - the specifications presented here; a compliant compressor must - produce data sets that conform to all the specifications presented - here. - - 1.5. Definitions of terms and conventions used - - byte: 8 bits stored or transmitted as a unit (same as an octet). - (For this specification, a byte is exactly 8 bits, even on - machines which store a character on a number of bits different - from 8.) See below, for the numbering of bits within a byte. - - 1.6. Changes from previous versions - - Version 3.1 was the first public release of this specification. - In version 3.2, some terminology was changed and the Adler-32 - sample code was rewritten for clarity. In version 3.3, the - support for a preset dictionary was introduced, and the - specification was converted to RFC style. - -2. Detailed specification - - 2.1. Overall conventions - - In the diagrams below, a box like this: - - +---+ - | | <-- the vertical bars might be missing - +---+ - - - - -Deutsch & Gailly Informational [Page 3] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - represents one byte; a box like this: - - +==============+ - | | - +==============+ - - represents a variable number of bytes. - - Bytes stored within a computer do not have a "bit order", since - they are always treated as a unit. However, a byte considered as - an integer between 0 and 255 does have a most- and least- - significant bit, and since we write numbers with the most- - significant digit on the left, we also write bytes with the most- - significant bit on the left. In the diagrams below, we number the - bits of a byte so that bit 0 is the least-significant bit, i.e., - the bits are numbered: - - +--------+ - |76543210| - +--------+ - - Within a computer, a number may occupy multiple bytes. All - multi-byte numbers in the format described here are stored with - the MOST-significant byte first (at the lower memory address). - For example, the decimal number 520 is stored as: - - 0 1 - +--------+--------+ - |00000010|00001000| - +--------+--------+ - ^ ^ - | | - | + less significant byte = 8 - + more significant byte = 2 x 256 - - 2.2. Data format - - A zlib stream has the following structure: - - 0 1 - +---+---+ - |CMF|FLG| (more-->) - +---+---+ - - - - - - - - -Deutsch & Gailly Informational [Page 4] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - (if FLG.FDICT set) - - 0 1 2 3 - +---+---+---+---+ - | DICTID | (more-->) - +---+---+---+---+ - - +=====================+---+---+---+---+ - |...compressed data...| ADLER32 | - +=====================+---+---+---+---+ - - Any data which may appear after ADLER32 are not part of the zlib - stream. - - CMF (Compression Method and flags) - This byte is divided into a 4-bit compression method and a 4- - bit information field depending on the compression method. - - bits 0 to 3 CM Compression method - bits 4 to 7 CINFO Compression info - - CM (Compression method) - This identifies the compression method used in the file. CM = 8 - denotes the "deflate" compression method with a window size up - to 32K. This is the method used by gzip and PNG (see - references [1] and [2] in Chapter 3, below, for the reference - documents). CM = 15 is reserved. It might be used in a future - version of this specification to indicate the presence of an - extra field before the compressed data. - - CINFO (Compression info) - For CM = 8, CINFO is the base-2 logarithm of the LZ77 window - size, minus eight (CINFO=7 indicates a 32K window size). Values - of CINFO above 7 are not allowed in this version of the - specification. CINFO is not defined in this specification for - CM not equal to 8. - - FLG (FLaGs) - This flag byte is divided as follows: - - bits 0 to 4 FCHECK (check bits for CMF and FLG) - bit 5 FDICT (preset dictionary) - bits 6 to 7 FLEVEL (compression level) - - The FCHECK value must be such that CMF and FLG, when viewed as - a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG), - is a multiple of 31. - - - - -Deutsch & Gailly Informational [Page 5] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - FDICT (Preset dictionary) - If FDICT is set, a DICT dictionary identifier is present - immediately after the FLG byte. The dictionary is a sequence of - bytes which are initially fed to the compressor without - producing any compressed output. DICT is the Adler-32 checksum - of this sequence of bytes (see the definition of ADLER32 - below). The decompressor can use this identifier to determine - which dictionary has been used by the compressor. - - FLEVEL (Compression level) - These flags are available for use by specific compression - methods. The "deflate" method (CM = 8) sets these flags as - follows: - - 0 - compressor used fastest algorithm - 1 - compressor used fast algorithm - 2 - compressor used default algorithm - 3 - compressor used maximum compression, slowest algorithm - - The information in FLEVEL is not needed for decompression; it - is there to indicate if recompression might be worthwhile. - - compressed data - For compression method 8, the compressed data is stored in the - deflate compressed data format as described in the document - "DEFLATE Compressed Data Format Specification" by L. Peter - Deutsch. (See reference [3] in Chapter 3, below) - - Other compressed data formats are not specified in this version - of the zlib specification. - - ADLER32 (Adler-32 checksum) - This contains a checksum value of the uncompressed data - (excluding any dictionary data) computed according to Adler-32 - algorithm. This algorithm is a 32-bit extension and improvement - of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073 - standard. See references [4] and [5] in Chapter 3, below) - - Adler-32 is composed of two sums accumulated per byte: s1 is - the sum of all bytes, s2 is the sum of all s1 values. Both sums - are done modulo 65521. s1 is initialized to 1, s2 to zero. The - Adler-32 checksum is stored as s2*65536 + s1 in most- - significant-byte first (network) order. - - - - - - - - -Deutsch & Gailly Informational [Page 6] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - 2.3. Compliance - - A compliant compressor must produce streams with correct CMF, FLG - and ADLER32, but need not support preset dictionaries. When the - zlib data format is used as part of another standard data format, - the compressor may use only preset dictionaries that are specified - by this other data format. If this other format does not use the - preset dictionary feature, the compressor must not set the FDICT - flag. - - A compliant decompressor must check CMF, FLG, and ADLER32, and - provide an error indication if any of these have incorrect values. - A compliant decompressor must give an error indication if CM is - not one of the values defined in this specification (only the - value 8 is permitted in this version), since another value could - indicate the presence of new features that would cause subsequent - data to be interpreted incorrectly. A compliant decompressor must - give an error indication if FDICT is set and DICTID is not the - identifier of a known preset dictionary. A decompressor may - ignore FLEVEL and still be compliant. When the zlib data format - is being used as a part of another standard format, a compliant - decompressor must support all the preset dictionaries specified by - the other format. When the other format does not use the preset - dictionary feature, a compliant decompressor must reject any - stream in which the FDICT flag is set. - -3. References - - [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification", - available in ftp://ftp.uu.net/pub/archiving/zip/doc/ - - [2] Thomas Boutell, "PNG (Portable Network Graphics) specification", - available in ftp://ftp.uu.net/graphics/png/documents/ - - [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", - available in ftp://ftp.uu.net/pub/archiving/zip/doc/ - - [4] Fletcher, J. G., "An Arithmetic Checksum for Serial - Transmissions," IEEE Transactions on Communications, Vol. COM-30, - No. 1, January 1982, pp. 247-252. - - [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms," - November, 1993, pp. 144, 145. (Available from - gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073. - - - - - - - -Deutsch & Gailly Informational [Page 7] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - -4. Source code - - Source code for a C language implementation of a "zlib" compliant - library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/. - -5. Security Considerations - - A decoder that fails to check the ADLER32 checksum value may be - subject to undetected data corruption. - -6. Acknowledgements - - Trademarks cited in this document are the property of their - respective owners. - - Jean-Loup Gailly and Mark Adler designed the zlib format and wrote - the related software described in this specification. Glenn - Randers-Pehrson converted this document to RFC and HTML format. - -7. Authors' Addresses - - L. Peter Deutsch - Aladdin Enterprises - 203 Santa Margarita Ave. - Menlo Park, CA 94025 - - Phone: (415) 322-0103 (AM only) - FAX: (415) 322-1734 - EMail: - - - Jean-Loup Gailly - - EMail: - - Questions about the technical content of this specification can be - sent by email to - - Jean-Loup Gailly and - Mark Adler - - Editorial comments on this specification can be sent by email to - - L. Peter Deutsch and - Glenn Randers-Pehrson - - - - - - -Deutsch & Gailly Informational [Page 8] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - -8. Appendix: Rationale - - 8.1. Preset dictionaries - - A preset dictionary is specially useful to compress short input - sequences. The compressor can take advantage of the dictionary - context to encode the input in a more compact manner. The - decompressor can be initialized with the appropriate context by - virtually decompressing a compressed version of the dictionary - without producing any output. However for certain compression - algorithms such as the deflate algorithm this operation can be - achieved without actually performing any decompression. - - The compressor and the decompressor must use exactly the same - dictionary. The dictionary may be fixed or may be chosen among a - certain number of predefined dictionaries, according to the kind - of input data. The decompressor can determine which dictionary has - been chosen by the compressor by checking the dictionary - identifier. This document does not specify the contents of - predefined dictionaries, since the optimal dictionaries are - application specific. Standard data formats using this feature of - the zlib specification must precisely define the allowed - dictionaries. - - 8.2. The Adler-32 algorithm - - The Adler-32 algorithm is much faster than the CRC32 algorithm yet - still provides an extremely low probability of undetected errors. - - The modulo on unsigned long accumulators can be delayed for 5552 - bytes, so the modulo operation time is negligible. If the bytes - are a, b, c, the second sum is 3a + 2b + c + 3, and so is position - and order sensitive, unlike the first sum, which is just a - checksum. That 65521 is prime is important to avoid a possible - large class of two-byte errors that leave the check unchanged. - (The Fletcher checksum uses 255, which is not prime and which also - makes the Fletcher check insensitive to single byte changes 0 <-> - 255.) - - The sum s1 is initialized to 1 instead of zero to make the length - of the sequence part of s2, so that the length does not have to be - checked separately. (Any sequence of zeroes has a Fletcher - checksum of zero.) - - - - - - - - -Deutsch & Gailly Informational [Page 9] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - -9. Appendix: Sample code - - The following C code computes the Adler-32 checksum of a data buffer. - It is written for clarity, not for speed. The sample code is in the - ANSI C programming language. Non C users may find it easier to read - with these hints: - - & Bitwise AND operator. - >> Bitwise right shift operator. When applied to an - unsigned quantity, as here, right shift inserts zero bit(s) - at the left. - << Bitwise left shift operator. Left shift inserts zero - bit(s) at the right. - ++ "n++" increments the variable n. - % modulo operator: a % b is the remainder of a divided by b. - - #define BASE 65521 /* largest prime smaller than 65536 */ - - /* - Update a running Adler-32 checksum with the bytes buf[0..len-1] - and return the updated checksum. The Adler-32 checksum should be - initialized to 1. - - Usage example: - - unsigned long adler = 1L; - - while (read_buffer(buffer, length) != EOF) { - adler = update_adler32(adler, buffer, length); - } - if (adler != original_adler) error(); - */ - unsigned long update_adler32(unsigned long adler, - unsigned char *buf, int len) - { - unsigned long s1 = adler & 0xffff; - unsigned long s2 = (adler >> 16) & 0xffff; - int n; - - for (n = 0; n < len; n++) { - s1 = (s1 + buf[n]) % BASE; - s2 = (s2 + s1) % BASE; - } - return (s2 << 16) + s1; - } - - /* Return the adler32 of the bytes buf[0..len-1] */ - - - - -Deutsch & Gailly Informational [Page 10] - -RFC 1950 ZLIB Compressed Data Format Specification May 1996 - - - unsigned long adler32(unsigned char *buf, int len) - { - return update_adler32(1L, buf, len); - } - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Deutsch & Gailly Informational [Page 11] - diff --git a/deps/zlib-1.2.11/doc/rfc1951.txt b/deps/zlib-1.2.11/doc/rfc1951.txt deleted file mode 100644 index 403c8c7..0000000 --- a/deps/zlib-1.2.11/doc/rfc1951.txt +++ /dev/null @@ -1,955 +0,0 @@ - - - - - - -Network Working Group P. Deutsch -Request for Comments: 1951 Aladdin Enterprises -Category: Informational May 1996 - - - DEFLATE Compressed Data Format Specification version 1.3 - -Status of This Memo - - This memo provides information for the Internet community. This memo - does not specify an Internet standard of any kind. Distribution of - this memo is unlimited. - -IESG Note: - - The IESG takes no position on the validity of any Intellectual - Property Rights statements contained in this document. - -Notices - - Copyright (c) 1996 L. Peter Deutsch - - Permission is granted to copy and distribute this document for any - purpose and without charge, including translations into other - languages and incorporation into compilations, provided that the - copyright notice and this notice are preserved, and that any - substantive changes or deletions from the original are clearly - marked. - - A pointer to the latest version of this and related documentation in - HTML format can be found at the URL - . - -Abstract - - This specification defines a lossless compressed data format that - compresses data using a combination of the LZ77 algorithm and Huffman - coding, with efficiency comparable to the best currently available - general-purpose compression methods. The data can be produced or - consumed, even for an arbitrarily long sequentially presented input - data stream, using only an a priori bounded amount of intermediate - storage. The format can be implemented readily in a manner not - covered by patents. - - - - - - - - -Deutsch Informational [Page 1] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - -Table of Contents - - 1. Introduction ................................................... 2 - 1.1. Purpose ................................................... 2 - 1.2. Intended audience ......................................... 3 - 1.3. Scope ..................................................... 3 - 1.4. Compliance ................................................ 3 - 1.5. Definitions of terms and conventions used ................ 3 - 1.6. Changes from previous versions ............................ 4 - 2. Compressed representation overview ............................. 4 - 3. Detailed specification ......................................... 5 - 3.1. Overall conventions ....................................... 5 - 3.1.1. Packing into bytes .................................. 5 - 3.2. Compressed block format ................................... 6 - 3.2.1. Synopsis of prefix and Huffman coding ............... 6 - 3.2.2. Use of Huffman coding in the "deflate" format ....... 7 - 3.2.3. Details of block format ............................. 9 - 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11 - 3.2.5. Compressed blocks (length and distance codes) ...... 11 - 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12 - 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13 - 3.3. Compliance ............................................... 14 - 4. Compression algorithm details ................................. 14 - 5. References .................................................... 16 - 6. Security Considerations ....................................... 16 - 7. Source code ................................................... 16 - 8. Acknowledgements .............................................. 16 - 9. Author's Address .............................................. 17 - -1. Introduction - - 1.1. Purpose - - The purpose of this specification is to define a lossless - compressed data format that: - * Is independent of CPU type, operating system, file system, - and character set, and hence can be used for interchange; - * Can be produced or consumed, even for an arbitrarily long - sequentially presented input data stream, using only an a - priori bounded amount of intermediate storage, and hence - can be used in data communications or similar structures - such as Unix filters; - * Compresses data with efficiency comparable to the best - currently available general-purpose compression methods, - and in particular considerably better than the "compress" - program; - * Can be implemented readily in a manner not covered by - patents, and hence can be practiced freely; - - - -Deutsch Informational [Page 2] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - * Is compatible with the file format produced by the current - widely used gzip utility, in that conforming decompressors - will be able to read data produced by the existing gzip - compressor. - - The data format defined by this specification does not attempt to: - - * Allow random access to compressed data; - * Compress specialized data (e.g., raster graphics) as well - as the best currently available specialized algorithms. - - A simple counting argument shows that no lossless compression - algorithm can compress every possible input data set. For the - format defined here, the worst case expansion is 5 bytes per 32K- - byte block, i.e., a size increase of 0.015% for large data sets. - English text usually compresses by a factor of 2.5 to 3; - executable files usually compress somewhat less; graphical data - such as raster images may compress much more. - - 1.2. Intended audience - - This specification is intended for use by implementors of software - to compress data into "deflate" format and/or decompress data from - "deflate" format. - - The text of the specification assumes a basic background in - programming at the level of bits and other primitive data - representations. Familiarity with the technique of Huffman coding - is helpful but not required. - - 1.3. Scope - - The specification specifies a method for representing a sequence - of bytes as a (usually shorter) sequence of bits, and a method for - packing the latter bit sequence into bytes. - - 1.4. Compliance - - Unless otherwise indicated below, a compliant decompressor must be - able to accept and decompress any data set that conforms to all - the specifications presented here; a compliant compressor must - produce data sets that conform to all the specifications presented - here. - - 1.5. Definitions of terms and conventions used - - Byte: 8 bits stored or transmitted as a unit (same as an octet). - For this specification, a byte is exactly 8 bits, even on machines - - - -Deutsch Informational [Page 3] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - which store a character on a number of bits different from eight. - See below, for the numbering of bits within a byte. - - String: a sequence of arbitrary bytes. - - 1.6. Changes from previous versions - - There have been no technical changes to the deflate format since - version 1.1 of this specification. In version 1.2, some - terminology was changed. Version 1.3 is a conversion of the - specification to RFC style. - -2. Compressed representation overview - - A compressed data set consists of a series of blocks, corresponding - to successive blocks of input data. The block sizes are arbitrary, - except that non-compressible blocks are limited to 65,535 bytes. - - Each block is compressed using a combination of the LZ77 algorithm - and Huffman coding. The Huffman trees for each block are independent - of those for previous or subsequent blocks; the LZ77 algorithm may - use a reference to a duplicated string occurring in a previous block, - up to 32K input bytes before. - - Each block consists of two parts: a pair of Huffman code trees that - describe the representation of the compressed data part, and a - compressed data part. (The Huffman trees themselves are compressed - using Huffman encoding.) The compressed data consists of a series of - elements of two types: literal bytes (of strings that have not been - detected as duplicated within the previous 32K input bytes), and - pointers to duplicated strings, where a pointer is represented as a - pair . The representation used in the - "deflate" format limits distances to 32K bytes and lengths to 258 - bytes, but does not limit the size of a block, except for - uncompressible blocks, which are limited as noted above. - - Each type of value (literals, distances, and lengths) in the - compressed data is represented using a Huffman code, using one code - tree for literals and lengths and a separate code tree for distances. - The code trees for each block appear in a compact form just before - the compressed data for that block. - - - - - - - - - - -Deutsch Informational [Page 4] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - -3. Detailed specification - - 3.1. Overall conventions In the diagrams below, a box like this: - - +---+ - | | <-- the vertical bars might be missing - +---+ - - represents one byte; a box like this: - - +==============+ - | | - +==============+ - - represents a variable number of bytes. - - Bytes stored within a computer do not have a "bit order", since - they are always treated as a unit. However, a byte considered as - an integer between 0 and 255 does have a most- and least- - significant bit, and since we write numbers with the most- - significant digit on the left, we also write bytes with the most- - significant bit on the left. In the diagrams below, we number the - bits of a byte so that bit 0 is the least-significant bit, i.e., - the bits are numbered: - - +--------+ - |76543210| - +--------+ - - Within a computer, a number may occupy multiple bytes. All - multi-byte numbers in the format described here are stored with - the least-significant byte first (at the lower memory address). - For example, the decimal number 520 is stored as: - - 0 1 - +--------+--------+ - |00001000|00000010| - +--------+--------+ - ^ ^ - | | - | + more significant byte = 2 x 256 - + less significant byte = 8 - - 3.1.1. Packing into bytes - - This document does not address the issue of the order in which - bits of a byte are transmitted on a bit-sequential medium, - since the final data format described here is byte- rather than - - - -Deutsch Informational [Page 5] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - bit-oriented. However, we describe the compressed block format - in below, as a sequence of data elements of various bit - lengths, not a sequence of bytes. We must therefore specify - how to pack these data elements into bytes to form the final - compressed byte sequence: - - * Data elements are packed into bytes in order of - increasing bit number within the byte, i.e., starting - with the least-significant bit of the byte. - * Data elements other than Huffman codes are packed - starting with the least-significant bit of the data - element. - * Huffman codes are packed starting with the most- - significant bit of the code. - - In other words, if one were to print out the compressed data as - a sequence of bytes, starting with the first byte at the - *right* margin and proceeding to the *left*, with the most- - significant bit of each byte on the left as usual, one would be - able to parse the result from right to left, with fixed-width - elements in the correct MSB-to-LSB order and Huffman codes in - bit-reversed order (i.e., with the first bit of the code in the - relative LSB position). - - 3.2. Compressed block format - - 3.2.1. Synopsis of prefix and Huffman coding - - Prefix coding represents symbols from an a priori known - alphabet by bit sequences (codes), one code for each symbol, in - a manner such that different symbols may be represented by bit - sequences of different lengths, but a parser can always parse - an encoded string unambiguously symbol-by-symbol. - - We define a prefix code in terms of a binary tree in which the - two edges descending from each non-leaf node are labeled 0 and - 1 and in which the leaf nodes correspond one-for-one with (are - labeled with) the symbols of the alphabet; then the code for a - symbol is the sequence of 0's and 1's on the edges leading from - the root to the leaf labeled with that symbol. For example: - - - - - - - - - - - -Deutsch Informational [Page 6] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - /\ Symbol Code - 0 1 ------ ---- - / \ A 00 - /\ B B 1 - 0 1 C 011 - / \ D 010 - A /\ - 0 1 - / \ - D C - - A parser can decode the next symbol from an encoded input - stream by walking down the tree from the root, at each step - choosing the edge corresponding to the next input bit. - - Given an alphabet with known symbol frequencies, the Huffman - algorithm allows the construction of an optimal prefix code - (one which represents strings with those symbol frequencies - using the fewest bits of any possible prefix codes for that - alphabet). Such a code is called a Huffman code. (See - reference [1] in Chapter 5, references for additional - information on Huffman codes.) - - Note that in the "deflate" format, the Huffman codes for the - various alphabets must not exceed certain maximum code lengths. - This constraint complicates the algorithm for computing code - lengths from symbol frequencies. Again, see Chapter 5, - references for details. - - 3.2.2. Use of Huffman coding in the "deflate" format - - The Huffman codes used for each alphabet in the "deflate" - format have two additional rules: - - * All codes of a given bit length have lexicographically - consecutive values, in the same order as the symbols - they represent; - - * Shorter codes lexicographically precede longer codes. - - - - - - - - - - - - -Deutsch Informational [Page 7] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - We could recode the example above to follow this rule as - follows, assuming that the order of the alphabet is ABCD: - - Symbol Code - ------ ---- - A 10 - B 0 - C 110 - D 111 - - I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are - lexicographically consecutive. - - Given this rule, we can define the Huffman code for an alphabet - just by giving the bit lengths of the codes for each symbol of - the alphabet in order; this is sufficient to determine the - actual codes. In our example, the code is completely defined - by the sequence of bit lengths (2, 1, 3, 3). The following - algorithm generates the codes as integers, intended to be read - from most- to least-significant bit. The code lengths are - initially in tree[I].Len; the codes are produced in - tree[I].Code. - - 1) Count the number of codes for each code length. Let - bl_count[N] be the number of codes of length N, N >= 1. - - 2) Find the numerical value of the smallest code for each - code length: - - code = 0; - bl_count[0] = 0; - for (bits = 1; bits <= MAX_BITS; bits++) { - code = (code + bl_count[bits-1]) << 1; - next_code[bits] = code; - } - - 3) Assign numerical values to all codes, using consecutive - values for all codes of the same length with the base - values determined at step 2. Codes that are never used - (which have a bit length of zero) must not be assigned a - value. - - for (n = 0; n <= max_code; n++) { - len = tree[n].Len; - if (len != 0) { - tree[n].Code = next_code[len]; - next_code[len]++; - } - - - -Deutsch Informational [Page 8] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - } - - Example: - - Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3, - 3, 2, 4, 4). After step 1, we have: - - N bl_count[N] - - ----------- - 2 1 - 3 5 - 4 2 - - Step 2 computes the following next_code values: - - N next_code[N] - - ------------ - 1 0 - 2 0 - 3 2 - 4 14 - - Step 3 produces the following code values: - - Symbol Length Code - ------ ------ ---- - A 3 010 - B 3 011 - C 3 100 - D 3 101 - E 3 110 - F 2 00 - G 4 1110 - H 4 1111 - - 3.2.3. Details of block format - - Each block of compressed data begins with 3 header bits - containing the following data: - - first bit BFINAL - next 2 bits BTYPE - - Note that the header bits do not necessarily begin on a byte - boundary, since a block does not necessarily occupy an integral - number of bytes. - - - - - -Deutsch Informational [Page 9] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - BFINAL is set if and only if this is the last block of the data - set. - - BTYPE specifies how the data are compressed, as follows: - - 00 - no compression - 01 - compressed with fixed Huffman codes - 10 - compressed with dynamic Huffman codes - 11 - reserved (error) - - The only difference between the two compressed cases is how the - Huffman codes for the literal/length and distance alphabets are - defined. - - In all cases, the decoding algorithm for the actual data is as - follows: - - do - read block header from input stream. - if stored with no compression - skip any remaining bits in current partially - processed byte - read LEN and NLEN (see next section) - copy LEN bytes of data to output - otherwise - if compressed with dynamic Huffman codes - read representation of code trees (see - subsection below) - loop (until end of block code recognized) - decode literal/length value from input stream - if value < 256 - copy value (literal byte) to output stream - otherwise - if value = end of block (256) - break from loop - otherwise (value = 257..285) - decode distance from input stream - - move backwards distance bytes in the output - stream, and copy length bytes from this - position to the output stream. - end loop - while not last block - - Note that a duplicated string reference may refer to a string - in a previous block; i.e., the backward distance may cross one - or more block boundaries. However a distance cannot refer past - the beginning of the output stream. (An application using a - - - -Deutsch Informational [Page 10] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - preset dictionary might discard part of the output stream; a - distance can refer to that part of the output stream anyway) - Note also that the referenced string may overlap the current - position; for example, if the last 2 bytes decoded have values - X and Y, a string reference with - adds X,Y,X,Y,X to the output stream. - - We now specify each compression method in turn. - - 3.2.4. Non-compressed blocks (BTYPE=00) - - Any bits of input up to the next byte boundary are ignored. - The rest of the block consists of the following information: - - 0 1 2 3 4... - +---+---+---+---+================================+ - | LEN | NLEN |... LEN bytes of literal data...| - +---+---+---+---+================================+ - - LEN is the number of data bytes in the block. NLEN is the - one's complement of LEN. - - 3.2.5. Compressed blocks (length and distance codes) - - As noted above, encoded data blocks in the "deflate" format - consist of sequences of symbols drawn from three conceptually - distinct alphabets: either literal bytes, from the alphabet of - byte values (0..255), or pairs, - where the length is drawn from (3..258) and the distance is - drawn from (1..32,768). In fact, the literal and length - alphabets are merged into a single alphabet (0..285), where - values 0..255 represent literal bytes, the value 256 indicates - end-of-block, and values 257..285 represent length codes - (possibly in conjunction with extra bits following the symbol - code) as follows: - - - - - - - - - - - - - - - - -Deutsch Informational [Page 11] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - Extra Extra Extra - Code Bits Length(s) Code Bits Lengths Code Bits Length(s) - ---- ---- ------ ---- ---- ------- ---- ---- ------- - 257 0 3 267 1 15,16 277 4 67-82 - 258 0 4 268 1 17,18 278 4 83-98 - 259 0 5 269 2 19-22 279 4 99-114 - 260 0 6 270 2 23-26 280 4 115-130 - 261 0 7 271 2 27-30 281 5 131-162 - 262 0 8 272 2 31-34 282 5 163-194 - 263 0 9 273 3 35-42 283 5 195-226 - 264 0 10 274 3 43-50 284 5 227-257 - 265 1 11,12 275 3 51-58 285 0 258 - 266 1 13,14 276 3 59-66 - - The extra bits should be interpreted as a machine integer - stored with the most-significant bit first, e.g., bits 1110 - represent the value 14. - - Extra Extra Extra - Code Bits Dist Code Bits Dist Code Bits Distance - ---- ---- ---- ---- ---- ------ ---- ---- -------- - 0 0 1 10 4 33-48 20 9 1025-1536 - 1 0 2 11 4 49-64 21 9 1537-2048 - 2 0 3 12 5 65-96 22 10 2049-3072 - 3 0 4 13 5 97-128 23 10 3073-4096 - 4 1 5,6 14 6 129-192 24 11 4097-6144 - 5 1 7,8 15 6 193-256 25 11 6145-8192 - 6 2 9-12 16 7 257-384 26 12 8193-12288 - 7 2 13-16 17 7 385-512 27 12 12289-16384 - 8 3 17-24 18 8 513-768 28 13 16385-24576 - 9 3 25-32 19 8 769-1024 29 13 24577-32768 - - 3.2.6. Compression with fixed Huffman codes (BTYPE=01) - - The Huffman codes for the two alphabets are fixed, and are not - represented explicitly in the data. The Huffman code lengths - for the literal/length alphabet are: - - Lit Value Bits Codes - --------- ---- ----- - 0 - 143 8 00110000 through - 10111111 - 144 - 255 9 110010000 through - 111111111 - 256 - 279 7 0000000 through - 0010111 - 280 - 287 8 11000000 through - 11000111 - - - -Deutsch Informational [Page 12] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - The code lengths are sufficient to generate the actual codes, - as described above; we show the codes in the table for added - clarity. Literal/length values 286-287 will never actually - occur in the compressed data, but participate in the code - construction. - - Distance codes 0-31 are represented by (fixed-length) 5-bit - codes, with possible additional bits as shown in the table - shown in Paragraph 3.2.5, above. Note that distance codes 30- - 31 will never actually occur in the compressed data. - - 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) - - The Huffman codes for the two alphabets appear in the block - immediately after the header bits and before the actual - compressed data, first the literal/length code and then the - distance code. Each code is defined by a sequence of code - lengths, as discussed in Paragraph 3.2.2, above. For even - greater compactness, the code length sequences themselves are - compressed using a Huffman code. The alphabet for code lengths - is as follows: - - 0 - 15: Represent code lengths of 0 - 15 - 16: Copy the previous code length 3 - 6 times. - The next 2 bits indicate repeat length - (0 = 3, ... , 3 = 6) - Example: Codes 8, 16 (+2 bits 11), - 16 (+2 bits 10) will expand to - 12 code lengths of 8 (1 + 6 + 5) - 17: Repeat a code length of 0 for 3 - 10 times. - (3 bits of length) - 18: Repeat a code length of 0 for 11 - 138 times - (7 bits of length) - - A code length of 0 indicates that the corresponding symbol in - the literal/length or distance alphabet will not occur in the - block, and should not participate in the Huffman code - construction algorithm given earlier. If only one distance - code is used, it is encoded using one bit, not zero bits; in - this case there is a single code length of one, with one unused - code. One distance code of zero bits means that there are no - distance codes used at all (the data is all literals). - - We can now define the format of the block: - - 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286) - 5 Bits: HDIST, # of Distance codes - 1 (1 - 32) - 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19) - - - -Deutsch Informational [Page 13] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - (HCLEN + 4) x 3 bits: code lengths for the code length - alphabet given just above, in the order: 16, 17, 18, - 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 - - These code lengths are interpreted as 3-bit integers - (0-7); as above, a code length of 0 means the - corresponding symbol (literal/length or distance code - length) is not used. - - HLIT + 257 code lengths for the literal/length alphabet, - encoded using the code length Huffman code - - HDIST + 1 code lengths for the distance alphabet, - encoded using the code length Huffman code - - The actual compressed data of the block, - encoded using the literal/length and distance Huffman - codes - - The literal/length symbol 256 (end of data), - encoded using the literal/length Huffman code - - The code length repeat codes can cross from HLIT + 257 to the - HDIST + 1 code lengths. In other words, all code lengths form - a single sequence of HLIT + HDIST + 258 values. - - 3.3. Compliance - - A compressor may limit further the ranges of values specified in - the previous section and still be compliant; for example, it may - limit the range of backward pointers to some value smaller than - 32K. Similarly, a compressor may limit the size of blocks so that - a compressible block fits in memory. - - A compliant decompressor must accept the full range of possible - values defined in the previous section, and must accept blocks of - arbitrary size. - -4. Compression algorithm details - - While it is the intent of this document to define the "deflate" - compressed data format without reference to any particular - compression algorithm, the format is related to the compressed - formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below); - since many variations of LZ77 are patented, it is strongly - recommended that the implementor of a compressor follow the general - algorithm presented here, which is known not to be patented per se. - The material in this section is not part of the definition of the - - - -Deutsch Informational [Page 14] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - - specification per se, and a compressor need not follow it in order to - be compliant. - - The compressor terminates a block when it determines that starting a - new block with fresh trees would be useful, or when the block size - fills up the compressor's block buffer. - - The compressor uses a chained hash table to find duplicated strings, - using a hash function that operates on 3-byte sequences. At any - given point during compression, let XYZ be the next 3 input bytes to - be examined (not necessarily all different, of course). First, the - compressor examines the hash chain for XYZ. If the chain is empty, - the compressor simply writes out X as a literal byte and advances one - byte in the input. If the hash chain is not empty, indicating that - the sequence XYZ (or, if we are unlucky, some other 3 bytes with the - same hash function value) has occurred recently, the compressor - compares all strings on the XYZ hash chain with the actual input data - sequence starting at the current point, and selects the longest - match. - - The compressor searches the hash chains starting with the most recent - strings, to favor small distances and thus take advantage of the - Huffman encoding. The hash chains are singly linked. There are no - deletions from the hash chains; the algorithm simply discards matches - that are too old. To avoid a worst-case situation, very long hash - chains are arbitrarily truncated at a certain length, determined by a - run-time parameter. - - To improve overall compression, the compressor optionally defers the - selection of matches ("lazy matching"): after a match of length N has - been found, the compressor searches for a longer match starting at - the next input byte. If it finds a longer match, it truncates the - previous match to a length of one (thus producing a single literal - byte) and then emits the longer match. Otherwise, it emits the - original match, and, as described above, advances N bytes before - continuing. - - Run-time parameters also control this "lazy match" procedure. If - compression ratio is most important, the compressor attempts a - complete second search regardless of the length of the first match. - In the normal case, if the current match is "long enough", the - compressor reduces the search for a longer match, thus speeding up - the process. If speed is most important, the compressor inserts new - strings in the hash table only when no match was found, or when the - match is not "too long". This degrades the compression ratio but - saves time since there are both fewer insertions and fewer searches. - - - - - -Deutsch Informational [Page 15] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - -5. References - - [1] Huffman, D. A., "A Method for the Construction of Minimum - Redundancy Codes", Proceedings of the Institute of Radio - Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101. - - [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data - Compression", IEEE Transactions on Information Theory, Vol. 23, - No. 3, pp. 337-343. - - [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources, - available in ftp://ftp.uu.net/pub/archiving/zip/doc/ - - [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources, - available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/ - - [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix - encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169. - - [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes," - Comm. ACM, 33,4, April 1990, pp. 449-459. - -6. Security Considerations - - Any data compression method involves the reduction of redundancy in - the data. Consequently, any corruption of the data is likely to have - severe effects and be difficult to correct. Uncompressed text, on - the other hand, will probably still be readable despite the presence - of some corrupted bytes. - - It is recommended that systems using this data format provide some - means of validating the integrity of the compressed data. See - reference [3], for example. - -7. Source code - - Source code for a C language implementation of a "deflate" compliant - compressor and decompressor is available within the zlib package at - ftp://ftp.uu.net/pub/archiving/zip/zlib/. - -8. Acknowledgements - - Trademarks cited in this document are the property of their - respective owners. - - Phil Katz designed the deflate format. Jean-Loup Gailly and Mark - Adler wrote the related software described in this specification. - Glenn Randers-Pehrson converted this document to RFC and HTML format. - - - -Deutsch Informational [Page 16] - -RFC 1951 DEFLATE Compressed Data Format Specification May 1996 - - -9. Author's Address - - L. Peter Deutsch - Aladdin Enterprises - 203 Santa Margarita Ave. - Menlo Park, CA 94025 - - Phone: (415) 322-0103 (AM only) - FAX: (415) 322-1734 - EMail: - - Questions about the technical content of this specification can be - sent by email to: - - Jean-Loup Gailly and - Mark Adler - - Editorial comments on this specification can be sent by email to: - - L. Peter Deutsch and - Glenn Randers-Pehrson - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Deutsch Informational [Page 17] - diff --git a/deps/zlib-1.2.11/doc/rfc1952.txt b/deps/zlib-1.2.11/doc/rfc1952.txt deleted file mode 100644 index a8e51b4..0000000 --- a/deps/zlib-1.2.11/doc/rfc1952.txt +++ /dev/null @@ -1,675 +0,0 @@ - - - - - - -Network Working Group P. Deutsch -Request for Comments: 1952 Aladdin Enterprises -Category: Informational May 1996 - - - GZIP file format specification version 4.3 - -Status of This Memo - - This memo provides information for the Internet community. This memo - does not specify an Internet standard of any kind. Distribution of - this memo is unlimited. - -IESG Note: - - The IESG takes no position on the validity of any Intellectual - Property Rights statements contained in this document. - -Notices - - Copyright (c) 1996 L. Peter Deutsch - - Permission is granted to copy and distribute this document for any - purpose and without charge, including translations into other - languages and incorporation into compilations, provided that the - copyright notice and this notice are preserved, and that any - substantive changes or deletions from the original are clearly - marked. - - A pointer to the latest version of this and related documentation in - HTML format can be found at the URL - . - -Abstract - - This specification defines a lossless compressed data format that is - compatible with the widely used GZIP utility. The format includes a - cyclic redundancy check value for detecting data corruption. The - format presently uses the DEFLATE method of compression but can be - easily extended to use other compression methods. The format can be - implemented readily in a manner not covered by patents. - - - - - - - - - - -Deutsch Informational [Page 1] - -RFC 1952 GZIP File Format Specification May 1996 - - -Table of Contents - - 1. Introduction ................................................... 2 - 1.1. Purpose ................................................... 2 - 1.2. Intended audience ......................................... 3 - 1.3. Scope ..................................................... 3 - 1.4. Compliance ................................................ 3 - 1.5. Definitions of terms and conventions used ................. 3 - 1.6. Changes from previous versions ............................ 3 - 2. Detailed specification ......................................... 4 - 2.1. Overall conventions ....................................... 4 - 2.2. File format ............................................... 5 - 2.3. Member format ............................................. 5 - 2.3.1. Member header and trailer ........................... 6 - 2.3.1.1. Extra field ................................... 8 - 2.3.1.2. Compliance .................................... 9 - 3. References .................................................. 9 - 4. Security Considerations .................................... 10 - 5. Acknowledgements ........................................... 10 - 6. Author's Address ........................................... 10 - 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11 - 8. Appendix: Sample CRC Code .................................. 11 - -1. Introduction - - 1.1. Purpose - - The purpose of this specification is to define a lossless - compressed data format that: - - * Is independent of CPU type, operating system, file system, - and character set, and hence can be used for interchange; - * Can compress or decompress a data stream (as opposed to a - randomly accessible file) to produce another data stream, - using only an a priori bounded amount of intermediate - storage, and hence can be used in data communications or - similar structures such as Unix filters; - * Compresses data with efficiency comparable to the best - currently available general-purpose compression methods, - and in particular considerably better than the "compress" - program; - * Can be implemented readily in a manner not covered by - patents, and hence can be practiced freely; - * Is compatible with the file format produced by the current - widely used gzip utility, in that conforming decompressors - will be able to read data produced by the existing gzip - compressor. - - - - -Deutsch Informational [Page 2] - -RFC 1952 GZIP File Format Specification May 1996 - - - The data format defined by this specification does not attempt to: - - * Provide random access to compressed data; - * Compress specialized data (e.g., raster graphics) as well as - the best currently available specialized algorithms. - - 1.2. Intended audience - - This specification is intended for use by implementors of software - to compress data into gzip format and/or decompress data from gzip - format. - - The text of the specification assumes a basic background in - programming at the level of bits and other primitive data - representations. - - 1.3. Scope - - The specification specifies a compression method and a file format - (the latter assuming only that a file can store a sequence of - arbitrary bytes). It does not specify any particular interface to - a file system or anything about character sets or encodings - (except for file names and comments, which are optional). - - 1.4. Compliance - - Unless otherwise indicated below, a compliant decompressor must be - able to accept and decompress any file that conforms to all the - specifications presented here; a compliant compressor must produce - files that conform to all the specifications presented here. The - material in the appendices is not part of the specification per se - and is not relevant to compliance. - - 1.5. Definitions of terms and conventions used - - byte: 8 bits stored or transmitted as a unit (same as an octet). - (For this specification, a byte is exactly 8 bits, even on - machines which store a character on a number of bits different - from 8.) See below for the numbering of bits within a byte. - - 1.6. Changes from previous versions - - There have been no technical changes to the gzip format since - version 4.1 of this specification. In version 4.2, some - terminology was changed, and the sample CRC code was rewritten for - clarity and to eliminate the requirement for the caller to do pre- - and post-conditioning. Version 4.3 is a conversion of the - specification to RFC style. - - - -Deutsch Informational [Page 3] - -RFC 1952 GZIP File Format Specification May 1996 - - -2. Detailed specification - - 2.1. Overall conventions - - In the diagrams below, a box like this: - - +---+ - | | <-- the vertical bars might be missing - +---+ - - represents one byte; a box like this: - - +==============+ - | | - +==============+ - - represents a variable number of bytes. - - Bytes stored within a computer do not have a "bit order", since - they are always treated as a unit. However, a byte considered as - an integer between 0 and 255 does have a most- and least- - significant bit, and since we write numbers with the most- - significant digit on the left, we also write bytes with the most- - significant bit on the left. In the diagrams below, we number the - bits of a byte so that bit 0 is the least-significant bit, i.e., - the bits are numbered: - - +--------+ - |76543210| - +--------+ - - This document does not address the issue of the order in which - bits of a byte are transmitted on a bit-sequential medium, since - the data format described here is byte- rather than bit-oriented. - - Within a computer, a number may occupy multiple bytes. All - multi-byte numbers in the format described here are stored with - the least-significant byte first (at the lower memory address). - For example, the decimal number 520 is stored as: - - 0 1 - +--------+--------+ - |00001000|00000010| - +--------+--------+ - ^ ^ - | | - | + more significant byte = 2 x 256 - + less significant byte = 8 - - - -Deutsch Informational [Page 4] - -RFC 1952 GZIP File Format Specification May 1996 - - - 2.2. File format - - A gzip file consists of a series of "members" (compressed data - sets). The format of each member is specified in the following - section. The members simply appear one after another in the file, - with no additional information before, between, or after them. - - 2.3. Member format - - Each member has the following structure: - - +---+---+---+---+---+---+---+---+---+---+ - |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->) - +---+---+---+---+---+---+---+---+---+---+ - - (if FLG.FEXTRA set) - - +---+---+=================================+ - | XLEN |...XLEN bytes of "extra field"...| (more-->) - +---+---+=================================+ - - (if FLG.FNAME set) - - +=========================================+ - |...original file name, zero-terminated...| (more-->) - +=========================================+ - - (if FLG.FCOMMENT set) - - +===================================+ - |...file comment, zero-terminated...| (more-->) - +===================================+ - - (if FLG.FHCRC set) - - +---+---+ - | CRC16 | - +---+---+ - - +=======================+ - |...compressed blocks...| (more-->) - +=======================+ - - 0 1 2 3 4 5 6 7 - +---+---+---+---+---+---+---+---+ - | CRC32 | ISIZE | - +---+---+---+---+---+---+---+---+ - - - - -Deutsch Informational [Page 5] - -RFC 1952 GZIP File Format Specification May 1996 - - - 2.3.1. Member header and trailer - - ID1 (IDentification 1) - ID2 (IDentification 2) - These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139 - (0x8b, \213), to identify the file as being in gzip format. - - CM (Compression Method) - This identifies the compression method used in the file. CM - = 0-7 are reserved. CM = 8 denotes the "deflate" - compression method, which is the one customarily used by - gzip and which is documented elsewhere. - - FLG (FLaGs) - This flag byte is divided into individual bits as follows: - - bit 0 FTEXT - bit 1 FHCRC - bit 2 FEXTRA - bit 3 FNAME - bit 4 FCOMMENT - bit 5 reserved - bit 6 reserved - bit 7 reserved - - If FTEXT is set, the file is probably ASCII text. This is - an optional indication, which the compressor may set by - checking a small amount of the input data to see whether any - non-ASCII characters are present. In case of doubt, FTEXT - is cleared, indicating binary data. For systems which have - different file formats for ascii text and binary data, the - decompressor can use FTEXT to choose the appropriate format. - We deliberately do not specify the algorithm used to set - this bit, since a compressor always has the option of - leaving it cleared and a decompressor always has the option - of ignoring it and letting some other program handle issues - of data conversion. - - If FHCRC is set, a CRC16 for the gzip header is present, - immediately before the compressed data. The CRC16 consists - of the two least significant bytes of the CRC32 for all - bytes of the gzip header up to and not including the CRC16. - [The FHCRC bit was never set by versions of gzip up to - 1.2.4, even though it was documented with a different - meaning in gzip 1.2.4.] - - If FEXTRA is set, optional extra fields are present, as - described in a following section. - - - -Deutsch Informational [Page 6] - -RFC 1952 GZIP File Format Specification May 1996 - - - If FNAME is set, an original file name is present, - terminated by a zero byte. The name must consist of ISO - 8859-1 (LATIN-1) characters; on operating systems using - EBCDIC or any other character set for file names, the name - must be translated to the ISO LATIN-1 character set. This - is the original name of the file being compressed, with any - directory components removed, and, if the file being - compressed is on a file system with case insensitive names, - forced to lower case. There is no original file name if the - data was compressed from a source other than a named file; - for example, if the source was stdin on a Unix system, there - is no file name. - - If FCOMMENT is set, a zero-terminated file comment is - present. This comment is not interpreted; it is only - intended for human consumption. The comment must consist of - ISO 8859-1 (LATIN-1) characters. Line breaks should be - denoted by a single line feed character (10 decimal). - - Reserved FLG bits must be zero. - - MTIME (Modification TIME) - This gives the most recent modification time of the original - file being compressed. The time is in Unix format, i.e., - seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this - may cause problems for MS-DOS and other systems that use - local rather than Universal time.) If the compressed data - did not come from a file, MTIME is set to the time at which - compression started. MTIME = 0 means no time stamp is - available. - - XFL (eXtra FLags) - These flags are available for use by specific compression - methods. The "deflate" method (CM = 8) sets these flags as - follows: - - XFL = 2 - compressor used maximum compression, - slowest algorithm - XFL = 4 - compressor used fastest algorithm - - OS (Operating System) - This identifies the type of file system on which compression - took place. This may be useful in determining end-of-line - convention for text files. The currently defined values are - as follows: - - - - - - -Deutsch Informational [Page 7] - -RFC 1952 GZIP File Format Specification May 1996 - - - 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32) - 1 - Amiga - 2 - VMS (or OpenVMS) - 3 - Unix - 4 - VM/CMS - 5 - Atari TOS - 6 - HPFS filesystem (OS/2, NT) - 7 - Macintosh - 8 - Z-System - 9 - CP/M - 10 - TOPS-20 - 11 - NTFS filesystem (NT) - 12 - QDOS - 13 - Acorn RISCOS - 255 - unknown - - XLEN (eXtra LENgth) - If FLG.FEXTRA is set, this gives the length of the optional - extra field. See below for details. - - CRC32 (CRC-32) - This contains a Cyclic Redundancy Check value of the - uncompressed data computed according to CRC-32 algorithm - used in the ISO 3309 standard and in section 8.1.1.6.2 of - ITU-T recommendation V.42. (See http://www.iso.ch for - ordering ISO documents. See gopher://info.itu.ch for an - online version of ITU-T V.42.) - - ISIZE (Input SIZE) - This contains the size of the original (uncompressed) input - data modulo 2^32. - - 2.3.1.1. Extra field - - If the FLG.FEXTRA bit is set, an "extra field" is present in - the header, with total length XLEN bytes. It consists of a - series of subfields, each of the form: - - +---+---+---+---+==================================+ - |SI1|SI2| LEN |... LEN bytes of subfield data ...| - +---+---+---+---+==================================+ - - SI1 and SI2 provide a subfield ID, typically two ASCII letters - with some mnemonic value. Jean-Loup Gailly - is maintaining a registry of subfield - IDs; please send him any subfield ID you wish to use. Subfield - IDs with SI2 = 0 are reserved for future use. The following - IDs are currently defined: - - - -Deutsch Informational [Page 8] - -RFC 1952 GZIP File Format Specification May 1996 - - - SI1 SI2 Data - ---------- ---------- ---- - 0x41 ('A') 0x70 ('P') Apollo file type information - - LEN gives the length of the subfield data, excluding the 4 - initial bytes. - - 2.3.1.2. Compliance - - A compliant compressor must produce files with correct ID1, - ID2, CM, CRC32, and ISIZE, but may set all the other fields in - the fixed-length part of the header to default values (255 for - OS, 0 for all others). The compressor must set all reserved - bits to zero. - - A compliant decompressor must check ID1, ID2, and CM, and - provide an error indication if any of these have incorrect - values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC - at least so it can skip over the optional fields if they are - present. It need not examine any other part of the header or - trailer; in particular, a decompressor may ignore FTEXT and OS - and always produce binary output, and still be compliant. A - compliant decompressor must give an error indication if any - reserved bit is non-zero, since such a bit could indicate the - presence of a new field that would cause subsequent data to be - interpreted incorrectly. - -3. References - - [1] "Information Processing - 8-bit single-byte coded graphic - character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987). - The ISO 8859-1 (Latin-1) character set is a superset of 7-bit - ASCII. Files defining this character set are available as - iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/ - - [2] ISO 3309 - - [3] ITU-T recommendation V.42 - - [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", - available in ftp://ftp.uu.net/pub/archiving/zip/doc/ - - [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in - ftp://prep.ai.mit.edu/pub/gnu/ - - [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table - Look-Up", Communications of the ACM, 31(8), pp.1008-1013. - - - - -Deutsch Informational [Page 9] - -RFC 1952 GZIP File Format Specification May 1996 - - - [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal, - pp.118-133. - - [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt, - describing the CRC concept. - -4. Security Considerations - - Any data compression method involves the reduction of redundancy in - the data. Consequently, any corruption of the data is likely to have - severe effects and be difficult to correct. Uncompressed text, on - the other hand, will probably still be readable despite the presence - of some corrupted bytes. - - It is recommended that systems using this data format provide some - means of validating the integrity of the compressed data, such as by - setting and checking the CRC-32 check value. - -5. Acknowledgements - - Trademarks cited in this document are the property of their - respective owners. - - Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler, - the related software described in this specification. Glenn - Randers-Pehrson converted this document to RFC and HTML format. - -6. Author's Address - - L. Peter Deutsch - Aladdin Enterprises - 203 Santa Margarita Ave. - Menlo Park, CA 94025 - - Phone: (415) 322-0103 (AM only) - FAX: (415) 322-1734 - EMail: - - Questions about the technical content of this specification can be - sent by email to: - - Jean-Loup Gailly and - Mark Adler - - Editorial comments on this specification can be sent by email to: - - L. Peter Deutsch and - Glenn Randers-Pehrson - - - -Deutsch Informational [Page 10] - -RFC 1952 GZIP File Format Specification May 1996 - - -7. Appendix: Jean-Loup Gailly's gzip utility - - The most widely used implementation of gzip compression, and the - original documentation on which this specification is based, were - created by Jean-Loup Gailly . Since this - implementation is a de facto standard, we mention some more of its - features here. Again, the material in this section is not part of - the specification per se, and implementations need not follow it to - be compliant. - - When compressing or decompressing a file, gzip preserves the - protection, ownership, and modification time attributes on the local - file system, since there is no provision for representing protection - attributes in the gzip file format itself. Since the file format - includes a modification time, the gzip decompressor provides a - command line switch that assigns the modification time from the file, - rather than the local modification time of the compressed input, to - the decompressed output. - -8. Appendix: Sample CRC Code - - The following sample code represents a practical implementation of - the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42 - for a formal specification.) - - The sample code is in the ANSI C programming language. Non C users - may find it easier to read with these hints: - - & Bitwise AND operator. - ^ Bitwise exclusive-OR operator. - >> Bitwise right shift operator. When applied to an - unsigned quantity, as here, right shift inserts zero - bit(s) at the left. - ! Logical NOT operator. - ++ "n++" increments the variable n. - 0xNNN 0x introduces a hexadecimal (base 16) constant. - Suffix L indicates a long value (at least 32 bits). - - /* Table of CRCs of all 8-bit messages. */ - unsigned long crc_table[256]; - - /* Flag: has the table been computed? Initially false. */ - int crc_table_computed = 0; - - /* Make the table for a fast CRC. */ - void make_crc_table(void) - { - unsigned long c; - - - -Deutsch Informational [Page 11] - -RFC 1952 GZIP File Format Specification May 1996 - - - int n, k; - for (n = 0; n < 256; n++) { - c = (unsigned long) n; - for (k = 0; k < 8; k++) { - if (c & 1) { - c = 0xedb88320L ^ (c >> 1); - } else { - c = c >> 1; - } - } - crc_table[n] = c; - } - crc_table_computed = 1; - } - - /* - Update a running crc with the bytes buf[0..len-1] and return - the updated crc. The crc should be initialized to zero. Pre- and - post-conditioning (one's complement) is performed within this - function so it shouldn't be done by the caller. Usage example: - - unsigned long crc = 0L; - - while (read_buffer(buffer, length) != EOF) { - crc = update_crc(crc, buffer, length); - } - if (crc != original_crc) error(); - */ - unsigned long update_crc(unsigned long crc, - unsigned char *buf, int len) - { - unsigned long c = crc ^ 0xffffffffL; - int n; - - if (!crc_table_computed) - make_crc_table(); - for (n = 0; n < len; n++) { - c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8); - } - return c ^ 0xffffffffL; - } - - /* Return the CRC of the bytes buf[0..len-1]. */ - unsigned long crc(unsigned char *buf, int len) - { - return update_crc(0L, buf, len); - } - - - - -Deutsch Informational [Page 12] - diff --git a/deps/zlib-1.2.11/doc/txtvsbin.txt b/deps/zlib-1.2.11/doc/txtvsbin.txt deleted file mode 100644 index 3d0f063..0000000 --- a/deps/zlib-1.2.11/doc/txtvsbin.txt +++ /dev/null @@ -1,107 +0,0 @@ -A Fast Method for Identifying Plain Text Files -============================================== - - -Introduction ------------- - -Given a file coming from an unknown source, it is sometimes desirable -to find out whether the format of that file is plain text. Although -this may appear like a simple task, a fully accurate detection of the -file type requires heavy-duty semantic analysis on the file contents. -It is, however, possible to obtain satisfactory results by employing -various heuristics. - -Previous versions of PKZip and other zip-compatible compression tools -were using a crude detection scheme: if more than 80% (4/5) of the bytes -found in a certain buffer are within the range [7..127], the file is -labeled as plain text, otherwise it is labeled as binary. A prominent -limitation of this scheme is the restriction to Latin-based alphabets. -Other alphabets, like Greek, Cyrillic or Asian, make extensive use of -the bytes within the range [128..255], and texts using these alphabets -are most often misidentified by this scheme; in other words, the rate -of false negatives is sometimes too high, which means that the recall -is low. Another weakness of this scheme is a reduced precision, due to -the false positives that may occur when binary files containing large -amounts of textual characters are misidentified as plain text. - -In this article we propose a new, simple detection scheme that features -a much increased precision and a near-100% recall. This scheme is -designed to work on ASCII, Unicode and other ASCII-derived alphabets, -and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.) -and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings -(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however. - - -The Algorithm -------------- - -The algorithm works by dividing the set of bytecodes [0..255] into three -categories: -- The white list of textual bytecodes: - 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255. -- The gray list of tolerated bytecodes: - 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC). -- The black list of undesired, non-textual bytecodes: - 0 (NUL) to 6, 14 to 31. - -If a file contains at least one byte that belongs to the white list and -no byte that belongs to the black list, then the file is categorized as -plain text; otherwise, it is categorized as binary. (The boundary case, -when the file is empty, automatically falls into the latter category.) - - -Rationale ---------- - -The idea behind this algorithm relies on two observations. - -The first observation is that, although the full range of 7-bit codes -[0..127] is properly specified by the ASCII standard, most control -characters in the range [0..31] are not used in practice. The only -widely-used, almost universally-portable control codes are 9 (TAB), -10 (LF) and 13 (CR). There are a few more control codes that are -recognized on a reduced range of platforms and text viewers/editors: -7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these -codes are rarely (if ever) used alone, without being accompanied by -some printable text. Even the newer, portable text formats such as -XML avoid using control characters outside the list mentioned here. - -The second observation is that most of the binary files tend to contain -control characters, especially 0 (NUL). Even though the older text -detection schemes observe the presence of non-ASCII codes from the range -[128..255], the precision rarely has to suffer if this upper range is -labeled as textual, because the files that are genuinely binary tend to -contain both control characters and codes from the upper range. On the -other hand, the upper range needs to be labeled as textual, because it -is used by virtually all ASCII extensions. In particular, this range is -used for encoding non-Latin scripts. - -Since there is no counting involved, other than simply observing the -presence or the absence of some byte values, the algorithm produces -consistent results, regardless what alphabet encoding is being used. -(If counting were involved, it could be possible to obtain different -results on a text encoded, say, using ISO-8859-16 versus UTF-8.) - -There is an extra category of plain text files that are "polluted" with -one or more black-listed codes, either by mistake or by peculiar design -considerations. In such cases, a scheme that tolerates a small fraction -of black-listed codes would provide an increased recall (i.e. more true -positives). This, however, incurs a reduced precision overall, since -false positives are more likely to appear in binary files that contain -large chunks of textual data. Furthermore, "polluted" plain text should -be regarded as binary by general-purpose text detection schemes, because -general-purpose text processing algorithms might not be applicable. -Under this premise, it is safe to say that our detection method provides -a near-100% recall. - -Experiments have been run on many files coming from various platforms -and applications. We tried plain text files, system logs, source code, -formatted office documents, compiled object code, etc. The results -confirm the optimistic assumptions about the capabilities of this -algorithm. - - --- -Cosmin Truta -Last updated: 2006-May-28 diff --git a/deps/zlib-1.2.11/gzguts.h b/deps/zlib-1.2.11/gzguts.h deleted file mode 100644 index 45be573..0000000 --- a/deps/zlib-1.2.11/gzguts.h +++ /dev/null @@ -1,222 +0,0 @@ -/* gzguts.h -- zlib internal header definitions for gz* operations - * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#ifndef _WIN32 -# include -#endif - -#ifdef _LARGEFILE64_SOURCE -# ifndef _LARGEFILE_SOURCE -# define _LARGEFILE_SOURCE 1 -# endif -# ifdef _FILE_OFFSET_BITS -# undef _FILE_OFFSET_BITS -# endif -#endif - -#ifdef HAVE_HIDDEN -# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) -#else -# define ZLIB_INTERNAL -#endif - -#include -#include "zlib.h" -#ifdef STDC -# include -# include -# include -#endif - -#ifndef _POSIX_SOURCE -# define _POSIX_SOURCE -#endif -#include - -#ifdef _WIN32 -# include -#endif - -#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) -# include -#endif - -#if defined(_WIN32) || defined(__CYGWIN__) -# define WIDECHAR -#endif - -#ifdef WINAPI_FAMILY -# define open _open -# define read _read -# define write _write -# define close _close -#endif - -#ifdef NO_DEFLATE /* for compatibility with old definition */ -# define NO_GZCOMPRESS -#endif - -#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(__CYGWIN__) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) -# ifndef HAVE_VSNPRINTF -# define HAVE_VSNPRINTF -# endif -#endif - -#ifndef HAVE_VSNPRINTF -# ifdef MSDOS -/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), - but for now we just assume it doesn't. */ -# define NO_vsnprintf -# endif -# ifdef __TURBOC__ -# define NO_vsnprintf -# endif -# ifdef WIN32 -/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ -# if !defined(vsnprintf) && !defined(NO_vsnprintf) -# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) -# define vsnprintf _vsnprintf -# endif -# endif -# endif -# ifdef __SASC -# define NO_vsnprintf -# endif -# ifdef VMS -# define NO_vsnprintf -# endif -# ifdef __OS400__ -# define NO_vsnprintf -# endif -# ifdef __MVS__ -# define NO_vsnprintf -# endif -#endif - -/* unlike snprintf (which is required in C99), _snprintf does not guarantee - null termination of the result -- however this is only used in gzlib.c where - the result is assured to fit in the space provided */ -#if defined(_MSC_VER) && _MSC_VER < 1900 -# define snprintf _snprintf -#endif - -#ifndef local -# define local static -#endif -/* since "static" is used to mean two completely different things in C, we - define "local" for the non-static meaning of "static", for readability - (compile with -Dlocal if your debugger can't find static symbols) */ - -/* gz* functions always use library allocation functions */ -#ifndef STDC - extern voidp malloc OF((uInt size)); - extern void free OF((voidpf ptr)); -#endif - -/* get errno and strerror definition */ -#if defined UNDER_CE -# include -# define zstrerror() gz_strwinerror((DWORD)GetLastError()) -#else -# ifndef NO_STRERROR -# include -# define zstrerror() strerror(errno) -# else -# define zstrerror() "stdio error (consult errno)" -# endif -#endif - -/* provide prototypes for these when building zlib without LFS */ -#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); -#endif - -/* default memLevel */ -#if MAX_MEM_LEVEL >= 8 -# define DEF_MEM_LEVEL 8 -#else -# define DEF_MEM_LEVEL MAX_MEM_LEVEL -#endif - -/* default i/o buffer size -- double this for output when reading (this and - twice this must be able to fit in an unsigned type) */ -#define GZBUFSIZE 8192 - -/* gzip modes, also provide a little integrity check on the passed structure */ -#define GZ_NONE 0 -#define GZ_READ 7247 -#define GZ_WRITE 31153 -#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ - -/* values for gz_state how */ -#define LOOK 0 /* look for a gzip header */ -#define COPY 1 /* copy input directly */ -#define GZIP 2 /* decompress a gzip stream */ - -/* internal gzip file state data structure */ -typedef struct { - /* exposed contents for gzgetc() macro */ - struct gzFile_s x; /* "x" for exposed */ - /* x.have: number of bytes available at x.next */ - /* x.next: next output data to deliver or write */ - /* x.pos: current position in uncompressed data */ - /* used for both reading and writing */ - int mode; /* see gzip modes above */ - int fd; /* file descriptor */ - char *path; /* path or fd for error messages */ - unsigned size; /* buffer size, zero if not allocated yet */ - unsigned want; /* requested buffer size, default is GZBUFSIZE */ - unsigned char *in; /* input buffer (double-sized when writing) */ - unsigned char *out; /* output buffer (double-sized when reading) */ - int direct; /* 0 if processing gzip, 1 if transparent */ - /* just for reading */ - int how; /* 0: get header, 1: copy, 2: decompress */ - z_off64_t start; /* where the gzip data started, for rewinding */ - int eof; /* true if end of input file reached */ - int past; /* true if read requested past end */ - /* just for writing */ - int level; /* compression level */ - int strategy; /* compression strategy */ - /* seek request */ - z_off64_t skip; /* amount to skip (already rewound if backwards) */ - int seek; /* true if seek request pending */ - /* error information */ - int err; /* error code */ - char *msg; /* error message */ - /* zlib inflate or deflate stream */ - z_stream strm; /* stream structure in-place (not a pointer) */ -} gz_state; -typedef gz_state FAR *gz_statep; - -/* shared functions */ -void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *)); -#if defined UNDER_CE -char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error)); -#endif - -/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t - value -- needed when comparing unsigned to z_off64_t, which is signed - (possible z_off64_t types off_t, off64_t, and long are all signed) */ -#ifdef INT_MAX -# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX) -#else -unsigned ZLIB_INTERNAL gz_intmax OF((void)); -# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) -#endif diff --git a/deps/zlib-1.2.11/infback.c b/deps/zlib-1.2.11/infback.c deleted file mode 100644 index 59679ec..0000000 --- a/deps/zlib-1.2.11/infback.c +++ /dev/null @@ -1,640 +0,0 @@ -/* infback.c -- inflate using a call-back interface - * Copyright (C) 1995-2016 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - This code is largely copied from inflate.c. Normally either infback.o or - inflate.o would be linked into an application--not both. The interface - with inffast.c is retained so that optimized assembler-coded versions of - inflate_fast() can be used with either inflate.c or infback.c. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); - -/* - strm provides memory allocation functions in zalloc and zfree, or - Z_NULL to use the library memory allocation functions. - - windowBits is in the range 8..15, and window is a user-supplied - window and output buffer that is 2**windowBits bytes. - */ -int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) -z_streamp strm; -int windowBits; -unsigned char FAR *window; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL || window == Z_NULL || - windowBits < 8 || windowBits > 15) - return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; -#endif - } - if (strm->zfree == (free_func)0) -#ifdef Z_SOLO - return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif - state = (struct inflate_state FAR *)ZALLOC(strm, 1, - sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - state->dmax = 32768U; - state->wbits = (uInt)windowBits; - state->wsize = 1U << windowBits; - state->window = window; - state->wnext = 0; - state->whave = 0; - return Z_OK; -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -/* Macros for inflateBack(): */ - -/* Load returned state from inflate_fast() */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Set state from registers for inflate_fast() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Assure that some input is available. If input is requested, but denied, - then return a Z_BUF_ERROR from inflateBack(). */ -#define PULL() \ - do { \ - if (have == 0) { \ - have = in(in_desc, &next); \ - if (have == 0) { \ - next = Z_NULL; \ - ret = Z_BUF_ERROR; \ - goto inf_leave; \ - } \ - } \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflateBack() - with an error if there is no input available. */ -#define PULLBYTE() \ - do { \ - PULL(); \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflateBack() with - an error. */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Assure that some output space is available, by writing out the window - if it's full. If the write fails, return from inflateBack() with a - Z_BUF_ERROR. */ -#define ROOM() \ - do { \ - if (left == 0) { \ - put = state->window; \ - left = state->wsize; \ - state->whave = left; \ - if (out(out_desc, put, left)) { \ - ret = Z_BUF_ERROR; \ - goto inf_leave; \ - } \ - } \ - } while (0) - -/* - strm provides the memory allocation functions and window buffer on input, - and provides information on the unused input on return. For Z_DATA_ERROR - returns, strm will also provide an error message. - - in() and out() are the call-back input and output functions. When - inflateBack() needs more input, it calls in(). When inflateBack() has - filled the window with output, or when it completes with data in the - window, it calls out() to write out the data. The application must not - change the provided input until in() is called again or inflateBack() - returns. The application must not change the window/output buffer until - inflateBack() returns. - - in() and out() are called with a descriptor parameter provided in the - inflateBack() call. This parameter can be a structure that provides the - information required to do the read or write, as well as accumulated - information on the input and output such as totals and check values. - - in() should return zero on failure. out() should return non-zero on - failure. If either in() or out() fails, than inflateBack() returns a - Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it - was in() or out() that caused in the error. Otherwise, inflateBack() - returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format - error, or Z_MEM_ERROR if it could not allocate memory for the state. - inflateBack() can also return Z_STREAM_ERROR if the input parameters - are not correct, i.e. strm is Z_NULL or the state was not initialized. - */ -int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) -z_streamp strm; -in_func in; -void FAR *in_desc; -out_func out; -void FAR *out_desc; -{ - struct inflate_state FAR *state; - z_const unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code here; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - /* Check that the strm exists and that the state was initialized */ - if (strm == Z_NULL || strm->state == Z_NULL) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - - /* Reset the state */ - strm->msg = Z_NULL; - state->mode = TYPE; - state->last = 0; - state->whave = 0; - next = strm->next_in; - have = next != Z_NULL ? strm->avail_in : 0; - hold = 0; - bits = 0; - put = state->window; - left = state->wsize; - - /* Inflate until end of block marked as last */ - for (;;) - switch (state->mode) { - case TYPE: - /* determine and dispatch block type */ - if (state->last) { - BYTEBITS(); - state->mode = DONE; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - - case STORED: - /* get and verify stored block length */ - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - - /* copy stored block from input to output */ - while (state->length != 0) { - copy = state->length; - PULL(); - ROOM(); - if (copy > have) copy = have; - if (copy > left) copy = left; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - - case TABLE: - /* get dynamic table entries descriptor */ - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - - /* get code length code lengths (not a typo) */ - state->have = 0; - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - - /* get length and distance code code lengths */ - state->have = 0; - while (state->have < state->nlen + state->ndist) { - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.val < 16) { - DROPBITS(here.bits); - state->lens[state->have++] = here.val; - } - else { - if (here.val == 16) { - NEEDBITS(here.bits + 2); - DROPBITS(here.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = (unsigned)(state->lens[state->have - 1]); - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (here.val == 17) { - NEEDBITS(here.bits + 3); - DROPBITS(here.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(here.bits + 7); - DROPBITS(here.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* check for end-of-block code (better have one) */ - if (state->lens[256] == 0) { - strm->msg = (char *)"invalid code -- missing end-of-block"; - state->mode = BAD; - break; - } - - /* build code tables -- note: do not change the lenbits or distbits - values here (9 and 6) without reading the comments in inftrees.h - concerning the ENOUGH constants, which depend on those values */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - - case LEN: - /* use inflate_fast() if we have enough input and output */ - if (have >= 6 && left >= 258) { - RESTORE(); - if (state->whave < state->wsize) - state->whave = state->wsize - left; - inflate_fast(strm, state->wsize); - LOAD(); - break; - } - - /* get a literal, length, or end-of-block code */ - for (;;) { - here = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if (here.op && (here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(here.bits); - state->length = (unsigned)here.val; - - /* process literal */ - if (here.op == 0) { - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); - ROOM(); - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - } - - /* process end of block */ - if (here.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - - /* invalid code */ - if (here.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - - /* length code -- get extra bits, if any */ - state->extra = (unsigned)(here.op) & 15; - if (state->extra != 0) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - - /* get distance code */ - for (;;) { - here = state->distcode[BITS(state->distbits)]; - if ((unsigned)(here.bits) <= bits) break; - PULLBYTE(); - } - if ((here.op & 0xf0) == 0) { - last = here; - for (;;) { - here = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + here.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(here.bits); - if (here.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)here.val; - - /* get distance extra bits, if any */ - state->extra = (unsigned)(here.op) & 15; - if (state->extra != 0) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } - if (state->offset > state->wsize - (state->whave < state->wsize ? - left : 0)) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - - /* copy match from window to output */ - do { - ROOM(); - copy = state->wsize - state->offset; - if (copy < left) { - from = put + copy; - copy = left - copy; - } - else { - from = put - state->offset; - copy = left; - } - if (copy > state->length) copy = state->length; - state->length -= copy; - left -= copy; - do { - *put++ = *from++; - } while (--copy); - } while (state->length != 0); - break; - - case DONE: - /* inflate stream terminated properly -- write leftover output */ - ret = Z_STREAM_END; - if (left < state->wsize) { - if (out(out_desc, state->window, state->wsize - left)) - ret = Z_BUF_ERROR; - } - goto inf_leave; - - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - - default: /* can't happen, but makes compilers happy */ - ret = Z_STREAM_ERROR; - goto inf_leave; - } - - /* Return unused input */ - inf_leave: - strm->next_in = next; - strm->avail_in = have; - return ret; -} - -int ZEXPORT inflateBackEnd(strm) -z_streamp strm; -{ - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} diff --git a/deps/zlib-1.2.11/inffast.c b/deps/zlib-1.2.11/inffast.c index 0dbd1db..a880d3a 100644 --- a/deps/zlib-1.2.11/inffast.c +++ b/deps/zlib-1.2.11/inffast.c @@ -8,10 +8,6 @@ #include "inflate.h" #include "inffast.h" -#ifdef ASMINF -# pragma message("Assembler code may have bugs -- use at your own risk") -#else - /* Decode literal, length, and distance codes and write out the resulting literal and match bytes until either not enough input or output is @@ -114,9 +110,6 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ bits -= op; op = (unsigned)(here.op); if (op == 0) { /* literal */ - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); *out++ = (unsigned char)(here.val); } else if (op & 16) { /* length base */ @@ -131,7 +124,6 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ hold >>= op; bits -= op; } - Tracevv((stderr, "inflate: length %u\n", len)); if (bits < 15) { hold += (unsigned long)(*in++) << bits; bits += 8; @@ -165,7 +157,6 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ #endif hold >>= op; bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); op = (unsigned)(out - beg); /* max distance in output */ if (dist > op) { /* see if copy from window */ op = dist - op; /* distance back in window */ @@ -278,7 +269,6 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ goto dolen; } else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); state->mode = TYPE; break; } @@ -303,21 +293,4 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ 257 + (end - out) : 257 - (out - end)); state->hold = hold; state->bits = bits; - return; } - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and wnext == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -#endif /* !ASMINF */ diff --git a/deps/zlib-1.2.11/inffixed.h b/deps/zlib-1.2.11/inffixed.h deleted file mode 100644 index d628327..0000000 --- a/deps/zlib-1.2.11/inffixed.h +++ /dev/null @@ -1,94 +0,0 @@ - /* inffixed.h -- table for decoding fixed codes - * Generated automatically by makefixed(). - */ - - /* WARNING: this file should *not* be used by applications. - It is part of the implementation of this library and is - subject to change. Applications should only use zlib.h. - */ - - static const code lenfix[512] = { - {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, - {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, - {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, - {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, - {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, - {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, - {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, - {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, - {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, - {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, - {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, - {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, - {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, - {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, - {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, - {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, - {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, - {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, - {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, - {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, - {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, - {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, - {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, - {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, - {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, - {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, - {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, - {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, - {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, - {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, - {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, - {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, - {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, - {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, - {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, - {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, - {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, - {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, - {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, - {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, - {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, - {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, - {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, - {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, - {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, - {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, - {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, - {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, - {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, - {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, - {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, - {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, - {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, - {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, - {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, - {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, - {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, - {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, - {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, - {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, - {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, - {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, - {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, - {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, - {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, - {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, - {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, - {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, - {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, - {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, - {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, - {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, - {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, - {0,9,255} - }; - - static const code distfix[32] = { - {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, - {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, - {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, - {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, - {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, - {22,5,193},{64,5,0} - }; diff --git a/deps/zlib-1.2.11/inflate.c b/deps/zlib-1.2.11/inflate.c index ac333e8..8e3a4e8 100644 --- a/deps/zlib-1.2.11/inflate.c +++ b/deps/zlib-1.2.11/inflate.c @@ -85,20 +85,14 @@ #include "inflate.h" #include "inffast.h" -#ifdef MAKEFIXED -# ifndef BUILDFIXED -# define BUILDFIXED -# endif -#endif +#define BUILDFIXED /* function prototypes */ local int inflateStateCheck OF((z_streamp strm)); local void fixedtables OF((struct inflate_state FAR *state)); local int updatewindow OF((z_streamp strm, const unsigned char FAR *end, unsigned copy)); -#ifdef BUILDFIXED - void makefixed OF((void)); -#endif +void makefixed OF((void)); local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf, unsigned len)); @@ -137,7 +131,6 @@ z_streamp strm; state->lencode = state->distcode = state->next = state->codes; state->sane = 1; state->back = -1; - Tracev((stderr, "inflate: reset\n")); return Z_OK; } @@ -207,23 +200,13 @@ int stream_size; if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { -#ifdef Z_SOLO return Z_STREAM_ERROR; -#else - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; -#endif } if (strm->zfree == (free_func)0) -#ifdef Z_SOLO return Z_STREAM_ERROR; -#else - strm->zfree = zcfree; -#endif state = (struct inflate_state FAR *) ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); strm->state = (struct internal_state FAR *)state; state->strm = strm; state->window = Z_NULL; @@ -278,7 +261,6 @@ int value; local void fixedtables(state) struct inflate_state FAR *state; { -#ifdef BUILDFIXED static int virgin = 1; static code *lenfix, *distfix; static code fixed[544]; @@ -309,76 +291,12 @@ struct inflate_state FAR *state; /* do this just once */ virgin = 0; } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ state->lencode = lenfix; state->lenbits = 9; state->distcode = distfix; state->distbits = 5; } -#ifdef MAKEFIXED -#include - -/* - Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also - defines BUILDFIXED, so the tables are built on the fly. makefixed() writes - those tables to stdout, which would be piped to inffixed.h. A small program - can simply call makefixed to do this: - - void makefixed(void); - - int main(void) - { - makefixed(); - return 0; - } - - Then that can be linked with zlib built with MAKEFIXED defined and run: - - a.out > inffixed.h - */ -void makefixed() -{ - unsigned low, size; - struct inflate_state state; - - fixedtables(&state); - puts(" /* inffixed.h -- table for decoding fixed codes"); - puts(" * Generated automatically by makefixed()."); - puts(" */"); - puts(""); - puts(" /* WARNING: this file should *not* be used by applications."); - puts(" It is part of the implementation of this library and is"); - puts(" subject to change. Applications should only use zlib.h."); - puts(" */"); - puts(""); - size = 1U << 9; - printf(" static const code lenfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, - state.lencode[low].bits, state.lencode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); - size = 1U << 5; - printf("\n static const code distfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 6) == 0) printf("\n "); - printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, - state.distcode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); -} -#endif /* MAKEFIXED */ - /* Update the window with the last wsize (normally 32K) bytes written before returning. If window does not exist yet, create it. This is only called @@ -697,7 +615,6 @@ int flush; break; } state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); strm->adler = state->check = adler32(0L, Z_NULL, 0); state->mode = hold & 0x200 ? DICTID : TYPE; INITBITS(); @@ -859,14 +776,10 @@ int flush; DROPBITS(1); switch (BITS(2)) { case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); state->mode = STORED; break; case 1: /* fixed block */ fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); state->mode = LEN_; /* decode codes */ if (flush == Z_TREES) { DROPBITS(2); @@ -874,8 +787,6 @@ int flush; } break; case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); state->mode = TABLE; break; case 3: @@ -893,8 +804,6 @@ int flush; break; } state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); INITBITS(); state->mode = COPY_; if (flush == Z_TREES) goto inf_leave; @@ -914,7 +823,6 @@ int flush; state->length -= copy; break; } - Tracev((stderr, "inflate: stored end\n")); state->mode = TYPE; break; case TABLE: @@ -932,7 +840,6 @@ int flush; break; } #endif - Tracev((stderr, "inflate: table sizes ok\n")); state->have = 0; state->mode = LENLENS; case LENLENS: @@ -953,7 +860,6 @@ int flush; state->mode = BAD; break; } - Tracev((stderr, "inflate: code lengths ok\n")); state->have = 0; state->mode = CODELENS; case CODELENS: @@ -1036,7 +942,6 @@ int flush; state->mode = BAD; break; } - Tracev((stderr, "inflate: codes ok\n")); state->mode = LEN_; if (flush == Z_TREES) goto inf_leave; case LEN_: @@ -1071,14 +976,10 @@ int flush; state->back += here.bits; state->length = (unsigned)here.val; if ((int)(here.op) == 0) { - Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", here.val)); state->mode = LIT; break; } if (here.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); state->back = -1; state->mode = TYPE; break; @@ -1097,7 +998,6 @@ int flush; DROPBITS(state->extra); state->back += state->extra; } - Tracevv((stderr, "inflate: length %u\n", state->length)); state->was = state->length; state->mode = DIST; case DIST: @@ -1141,7 +1041,6 @@ int flush; break; } #endif - Tracevv((stderr, "inflate: distance %u\n", state->offset)); state->mode = MATCH; case MATCH: if (left == 0) goto inf_leave; @@ -1155,7 +1054,6 @@ int flush; break; } #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR - Trace((stderr, "inflate.c too far\n")); copy -= state->whave; if (copy > state->length) copy = state->length; if (copy > left) copy = left; @@ -1214,7 +1112,6 @@ int flush; break; } INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); } #ifdef GUNZIP state->mode = LENGTH; @@ -1227,7 +1124,6 @@ int flush; break; } INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); } #endif state->mode = DONE; @@ -1284,7 +1180,6 @@ z_streamp strm; if (state->window != Z_NULL) ZFREE(strm, state->window); ZFREE(strm, strm->state); strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); return Z_OK; } @@ -1342,7 +1237,6 @@ uInt dictLength; return Z_MEM_ERROR; } state->havedict = 1; - Tracev((stderr, "inflate: dictionary set\n")); return Z_OK; } diff --git a/deps/zlib-1.2.11/zconf.h b/deps/zlib-1.2.11/zconf.h index 5e1d68a..22cd33e 100644 --- a/deps/zlib-1.2.11/zconf.h +++ b/deps/zlib-1.2.11/zconf.h @@ -8,6 +8,8 @@ #ifndef ZCONF_H #define ZCONF_H +#include + /* * If you *really* need a unique prefix for all types and library functions, * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. @@ -27,14 +29,7 @@ # define _tr_stored_block z__tr_stored_block # define _tr_tally z__tr_tally # define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 # define adler32_z z_adler32_z -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif # define crc32 z_crc32 # define crc32_combine z_crc32_combine # define crc32_combine64 z_crc32_combine64 @@ -58,46 +53,6 @@ # define deflateTune z_deflateTune # define deflate_copyright z_deflate_copyright # define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzfread z_gzfread -# define gzfwrite z_gzfwrite -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzvprintf z_gzvprintf -# define gzwrite z_gzwrite -# endif # define inflate z_inflate # define inflateBack z_inflateBack # define inflateBackEnd z_inflateBackEnd @@ -125,15 +80,7 @@ # define inflate_copyright z_inflate_copyright # define inflate_fast z_inflate_fast # define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# define uncompress2 z_uncompress2 -# endif # define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif # define zlibCompileFlags z_zlibCompileFlags # define zlibVersion z_zlibVersion @@ -143,9 +90,6 @@ # define alloc_func z_alloc_func # define charf z_charf # define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif # define gz_header z_gz_header # define gz_headerp z_gz_headerp # define in_func z_in_func @@ -225,32 +169,9 @@ # define STDC #endif -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif +#define z_const const -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -#ifdef Z_SOLO - typedef unsigned long z_size_t; -#else -# define z_longlong long long -# if defined(NO_SIZE_T) - typedef unsigned NO_SIZE_T z_size_t; -# elif defined(STDC) -# include - typedef size_t z_size_t; -# else - typedef unsigned long z_size_t; -# endif -# undef z_longlong -#endif +typedef size_t z_size_t; /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL @@ -294,83 +215,7 @@ #endif #ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif +#define Z_ARG(args) args #endif #ifndef ZEXTERN @@ -393,12 +238,7 @@ typedef unsigned char Byte; /* 8 bits */ typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif +typedef Byte FAR Bytef; typedef char FAR charf; typedef int FAR intf; typedef uInt FAR uIntf; @@ -414,48 +254,11 @@ typedef uLong FAR uLongf; typedef Byte *voidp; #endif -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) -# include -# if (UINT_MAX == 0xffffffffUL) -# define Z_U4 unsigned -# elif (ULONG_MAX == 0xffffffffUL) -# define Z_U4 unsigned long -# elif (USHRT_MAX == 0xffffffffUL) -# define Z_U4 unsigned short -# endif -#endif +typedef unsigned long z_crc_t; -#ifdef Z_U4 - typedef Z_U4 z_crc_t; -#else - typedef unsigned long z_crc_t; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -# include /* for off_t */ -# endif -#endif - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include /* for va_list */ -# endif -#endif - -#ifdef _WIN32 -# ifndef Z_SOLO -# include /* for wchar_t */ -# endif -#endif +#include /* for off_t */ +#include /* for va_list */ +#include /* for wchar_t */ /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even @@ -467,19 +270,14 @@ typedef uLong FAR uLongf; # undef _LARGEFILE64_SOURCE #endif -#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) -# define Z_HAVE_UNISTD_H +#ifdef _WIN32 +#include +#else +#include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ #endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -# endif + +#ifndef z_off_t +#define z_off_t off_t #endif #if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 @@ -494,41 +292,14 @@ typedef uLong FAR uLongf; # define Z_WANT64 #endif -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - #ifndef z_off_t # define z_off_t long #endif #if !defined(_WIN32) && defined(Z_LARGE64) -# define z_off64_t off64_t +#define z_off64_t off64_t #else -# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -# endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") +#define z_off64_t z_off_t #endif #endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zconf.h.cmakein b/deps/zlib-1.2.11/zconf.h.cmakein deleted file mode 100644 index a7f24cc..0000000 --- a/deps/zlib-1.2.11/zconf.h.cmakein +++ /dev/null @@ -1,536 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H -#cmakedefine Z_PREFIX -#cmakedefine Z_HAVE_UNISTD_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols and init macros */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_bits z__tr_flush_bits -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# define adler32_z z_adler32_z -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define crc32_z z_crc32_z -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateGetDictionary z_deflateGetDictionary -# define deflateInit z_deflateInit -# define deflateInit2 z_deflateInit2 -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzfread z_gzfread -# define gzfwrite z_gzfwrite -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzvprintf z_gzvprintf -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit z_inflateBackInit -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCodesUsed z_inflateCodesUsed -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetDictionary z_inflateGetDictionary -# define inflateGetHeader z_inflateGetHeader -# define inflateInit z_inflateInit -# define inflateInit2 z_inflateInit2 -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateResetKeep z_inflateResetKeep -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateValidate z_inflateValidate -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# define uncompress2 z_uncompress2 -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -#ifdef Z_SOLO - typedef unsigned long z_size_t; -#else -# define z_longlong long long -# if defined(NO_SIZE_T) - typedef unsigned NO_SIZE_T z_size_t; -# elif defined(STDC) -# include - typedef size_t z_size_t; -# else - typedef unsigned long z_size_t; -# endif -# undef z_longlong -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus about 7 kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -#ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) -# include -# if (UINT_MAX == 0xffffffffUL) -# define Z_U4 unsigned -# elif (ULONG_MAX == 0xffffffffUL) -# define Z_U4 unsigned long -# elif (USHRT_MAX == 0xffffffffUL) -# define Z_U4 unsigned short -# endif -#endif - -#ifdef Z_U4 - typedef Z_U4 z_crc_t; -#else - typedef unsigned long z_crc_t; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -# include /* for off_t */ -# endif -#endif - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include /* for va_list */ -# endif -#endif - -#ifdef _WIN32 -# ifndef Z_SOLO -# include /* for wchar_t */ -# endif -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) -# define Z_HAVE_UNISTD_H -#endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -# endif -#endif - -#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 -# define Z_LFS64 -#endif - -#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) -# define Z_LARGE64 -#endif - -#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) -# define Z_WANT64 -#endif - -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if !defined(_WIN32) && defined(Z_LARGE64) -# define z_off64_t off64_t -#else -# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -# endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zconf.h.in b/deps/zlib-1.2.11/zconf.h.in deleted file mode 100644 index 5e1d68a..0000000 --- a/deps/zlib-1.2.11/zconf.h.in +++ /dev/null @@ -1,534 +0,0 @@ -/* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#ifndef ZCONF_H -#define ZCONF_H - -/* - * If you *really* need a unique prefix for all types and library functions, - * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. - * Even better than compiling with -DZ_PREFIX would be to use configure to set - * this permanently in zconf.h using "./configure --zprefix". - */ -#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ -# define Z_PREFIX_SET - -/* all linked symbols and init macros */ -# define _dist_code z__dist_code -# define _length_code z__length_code -# define _tr_align z__tr_align -# define _tr_flush_bits z__tr_flush_bits -# define _tr_flush_block z__tr_flush_block -# define _tr_init z__tr_init -# define _tr_stored_block z__tr_stored_block -# define _tr_tally z__tr_tally -# define adler32 z_adler32 -# define adler32_combine z_adler32_combine -# define adler32_combine64 z_adler32_combine64 -# define adler32_z z_adler32_z -# ifndef Z_SOLO -# define compress z_compress -# define compress2 z_compress2 -# define compressBound z_compressBound -# endif -# define crc32 z_crc32 -# define crc32_combine z_crc32_combine -# define crc32_combine64 z_crc32_combine64 -# define crc32_z z_crc32_z -# define deflate z_deflate -# define deflateBound z_deflateBound -# define deflateCopy z_deflateCopy -# define deflateEnd z_deflateEnd -# define deflateGetDictionary z_deflateGetDictionary -# define deflateInit z_deflateInit -# define deflateInit2 z_deflateInit2 -# define deflateInit2_ z_deflateInit2_ -# define deflateInit_ z_deflateInit_ -# define deflateParams z_deflateParams -# define deflatePending z_deflatePending -# define deflatePrime z_deflatePrime -# define deflateReset z_deflateReset -# define deflateResetKeep z_deflateResetKeep -# define deflateSetDictionary z_deflateSetDictionary -# define deflateSetHeader z_deflateSetHeader -# define deflateTune z_deflateTune -# define deflate_copyright z_deflate_copyright -# define get_crc_table z_get_crc_table -# ifndef Z_SOLO -# define gz_error z_gz_error -# define gz_intmax z_gz_intmax -# define gz_strwinerror z_gz_strwinerror -# define gzbuffer z_gzbuffer -# define gzclearerr z_gzclearerr -# define gzclose z_gzclose -# define gzclose_r z_gzclose_r -# define gzclose_w z_gzclose_w -# define gzdirect z_gzdirect -# define gzdopen z_gzdopen -# define gzeof z_gzeof -# define gzerror z_gzerror -# define gzflush z_gzflush -# define gzfread z_gzfread -# define gzfwrite z_gzfwrite -# define gzgetc z_gzgetc -# define gzgetc_ z_gzgetc_ -# define gzgets z_gzgets -# define gzoffset z_gzoffset -# define gzoffset64 z_gzoffset64 -# define gzopen z_gzopen -# define gzopen64 z_gzopen64 -# ifdef _WIN32 -# define gzopen_w z_gzopen_w -# endif -# define gzprintf z_gzprintf -# define gzputc z_gzputc -# define gzputs z_gzputs -# define gzread z_gzread -# define gzrewind z_gzrewind -# define gzseek z_gzseek -# define gzseek64 z_gzseek64 -# define gzsetparams z_gzsetparams -# define gztell z_gztell -# define gztell64 z_gztell64 -# define gzungetc z_gzungetc -# define gzvprintf z_gzvprintf -# define gzwrite z_gzwrite -# endif -# define inflate z_inflate -# define inflateBack z_inflateBack -# define inflateBackEnd z_inflateBackEnd -# define inflateBackInit z_inflateBackInit -# define inflateBackInit_ z_inflateBackInit_ -# define inflateCodesUsed z_inflateCodesUsed -# define inflateCopy z_inflateCopy -# define inflateEnd z_inflateEnd -# define inflateGetDictionary z_inflateGetDictionary -# define inflateGetHeader z_inflateGetHeader -# define inflateInit z_inflateInit -# define inflateInit2 z_inflateInit2 -# define inflateInit2_ z_inflateInit2_ -# define inflateInit_ z_inflateInit_ -# define inflateMark z_inflateMark -# define inflatePrime z_inflatePrime -# define inflateReset z_inflateReset -# define inflateReset2 z_inflateReset2 -# define inflateResetKeep z_inflateResetKeep -# define inflateSetDictionary z_inflateSetDictionary -# define inflateSync z_inflateSync -# define inflateSyncPoint z_inflateSyncPoint -# define inflateUndermine z_inflateUndermine -# define inflateValidate z_inflateValidate -# define inflate_copyright z_inflate_copyright -# define inflate_fast z_inflate_fast -# define inflate_table z_inflate_table -# ifndef Z_SOLO -# define uncompress z_uncompress -# define uncompress2 z_uncompress2 -# endif -# define zError z_zError -# ifndef Z_SOLO -# define zcalloc z_zcalloc -# define zcfree z_zcfree -# endif -# define zlibCompileFlags z_zlibCompileFlags -# define zlibVersion z_zlibVersion - -/* all zlib typedefs in zlib.h and zconf.h */ -# define Byte z_Byte -# define Bytef z_Bytef -# define alloc_func z_alloc_func -# define charf z_charf -# define free_func z_free_func -# ifndef Z_SOLO -# define gzFile z_gzFile -# endif -# define gz_header z_gz_header -# define gz_headerp z_gz_headerp -# define in_func z_in_func -# define intf z_intf -# define out_func z_out_func -# define uInt z_uInt -# define uIntf z_uIntf -# define uLong z_uLong -# define uLongf z_uLongf -# define voidp z_voidp -# define voidpc z_voidpc -# define voidpf z_voidpf - -/* all zlib structs in zlib.h and zconf.h */ -# define gz_header_s z_gz_header_s -# define internal_state z_internal_state - -#endif - -#if defined(__MSDOS__) && !defined(MSDOS) -# define MSDOS -#endif -#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) -# define OS2 -#endif -#if defined(_WINDOWS) && !defined(WINDOWS) -# define WINDOWS -#endif -#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) -# ifndef WIN32 -# define WIN32 -# endif -#endif -#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) -# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) -# ifndef SYS16BIT -# define SYS16BIT -# endif -# endif -#endif - -/* - * Compile with -DMAXSEG_64K if the alloc function cannot allocate more - * than 64k bytes at a time (needed on systems with 16-bit int). - */ -#ifdef SYS16BIT -# define MAXSEG_64K -#endif -#ifdef MSDOS -# define UNALIGNED_OK -#endif - -#ifdef __STDC_VERSION__ -# ifndef STDC -# define STDC -# endif -# if __STDC_VERSION__ >= 199901L -# ifndef STDC99 -# define STDC99 -# endif -# endif -#endif -#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) -# define STDC -#endif -#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) -# define STDC -#endif -#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) -# define STDC -#endif -#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) -# define STDC -#endif - -#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ -# define STDC -#endif - -#ifndef STDC -# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ -# define const /* note: need a more gentle solution here */ -# endif -#endif - -#if defined(ZLIB_CONST) && !defined(z_const) -# define z_const const -#else -# define z_const -#endif - -#ifdef Z_SOLO - typedef unsigned long z_size_t; -#else -# define z_longlong long long -# if defined(NO_SIZE_T) - typedef unsigned NO_SIZE_T z_size_t; -# elif defined(STDC) -# include - typedef size_t z_size_t; -# else - typedef unsigned long z_size_t; -# endif -# undef z_longlong -#endif - -/* Maximum value for memLevel in deflateInit2 */ -#ifndef MAX_MEM_LEVEL -# ifdef MAXSEG_64K -# define MAX_MEM_LEVEL 8 -# else -# define MAX_MEM_LEVEL 9 -# endif -#endif - -/* Maximum value for windowBits in deflateInit2 and inflateInit2. - * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files - * created by gzip. (Files created by minigzip can still be extracted by - * gzip.) - */ -#ifndef MAX_WBITS -# define MAX_WBITS 15 /* 32K LZ77 window */ -#endif - -/* The memory requirements for deflate are (in bytes): - (1 << (windowBits+2)) + (1 << (memLevel+9)) - that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) - plus a few kilobytes for small objects. For example, if you want to reduce - the default memory requirements from 256K to 128K, compile with - make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" - Of course this will generally degrade compression (there's no free lunch). - - The memory requirements for inflate are (in bytes) 1 << windowBits - that is, 32K for windowBits=15 (default value) plus about 7 kilobytes - for small objects. -*/ - - /* Type declarations */ - -#ifndef OF /* function prototypes */ -# ifdef STDC -# define OF(args) args -# else -# define OF(args) () -# endif -#endif - -#ifndef Z_ARG /* function prototypes for stdarg */ -# if defined(STDC) || defined(Z_HAVE_STDARG_H) -# define Z_ARG(args) args -# else -# define Z_ARG(args) () -# endif -#endif - -/* The following definitions for FAR are needed only for MSDOS mixed - * model programming (small or medium model with some far allocations). - * This was tested only with MSC; for other MSDOS compilers you may have - * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, - * just define FAR to be empty. - */ -#ifdef SYS16BIT -# if defined(M_I86SM) || defined(M_I86MM) - /* MSC small or medium model */ -# define SMALL_MEDIUM -# ifdef _MSC_VER -# define FAR _far -# else -# define FAR far -# endif -# endif -# if (defined(__SMALL__) || defined(__MEDIUM__)) - /* Turbo C small or medium model */ -# define SMALL_MEDIUM -# ifdef __BORLANDC__ -# define FAR _far -# else -# define FAR far -# endif -# endif -#endif - -#if defined(WINDOWS) || defined(WIN32) - /* If building or using zlib as a DLL, define ZLIB_DLL. - * This is not mandatory, but it offers a little performance increase. - */ -# ifdef ZLIB_DLL -# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) -# ifdef ZLIB_INTERNAL -# define ZEXTERN extern __declspec(dllexport) -# else -# define ZEXTERN extern __declspec(dllimport) -# endif -# endif -# endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, - * define ZLIB_WINAPI. - * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. - */ -# ifdef ZLIB_WINAPI -# ifdef FAR -# undef FAR -# endif -# include - /* No need for _export, use ZLIB.DEF instead. */ - /* For complete Windows compatibility, use WINAPI, not __stdcall. */ -# define ZEXPORT WINAPI -# ifdef WIN32 -# define ZEXPORTVA WINAPIV -# else -# define ZEXPORTVA FAR CDECL -# endif -# endif -#endif - -#if defined (__BEOS__) -# ifdef ZLIB_DLL -# ifdef ZLIB_INTERNAL -# define ZEXPORT __declspec(dllexport) -# define ZEXPORTVA __declspec(dllexport) -# else -# define ZEXPORT __declspec(dllimport) -# define ZEXPORTVA __declspec(dllimport) -# endif -# endif -#endif - -#ifndef ZEXTERN -# define ZEXTERN extern -#endif -#ifndef ZEXPORT -# define ZEXPORT -#endif -#ifndef ZEXPORTVA -# define ZEXPORTVA -#endif - -#ifndef FAR -# define FAR -#endif - -#if !defined(__MACTYPES__) -typedef unsigned char Byte; /* 8 bits */ -#endif -typedef unsigned int uInt; /* 16 bits or more */ -typedef unsigned long uLong; /* 32 bits or more */ - -#ifdef SMALL_MEDIUM - /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ -# define Bytef Byte FAR -#else - typedef Byte FAR Bytef; -#endif -typedef char FAR charf; -typedef int FAR intf; -typedef uInt FAR uIntf; -typedef uLong FAR uLongf; - -#ifdef STDC - typedef void const *voidpc; - typedef void FAR *voidpf; - typedef void *voidp; -#else - typedef Byte const *voidpc; - typedef Byte FAR *voidpf; - typedef Byte *voidp; -#endif - -#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) -# include -# if (UINT_MAX == 0xffffffffUL) -# define Z_U4 unsigned -# elif (ULONG_MAX == 0xffffffffUL) -# define Z_U4 unsigned long -# elif (USHRT_MAX == 0xffffffffUL) -# define Z_U4 unsigned short -# endif -#endif - -#ifdef Z_U4 - typedef Z_U4 z_crc_t; -#else - typedef unsigned long z_crc_t; -#endif - -#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_UNISTD_H -#endif - -#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ -# define Z_HAVE_STDARG_H -#endif - -#ifdef STDC -# ifndef Z_SOLO -# include /* for off_t */ -# endif -#endif - -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -# include /* for va_list */ -# endif -#endif - -#ifdef _WIN32 -# ifndef Z_SOLO -# include /* for wchar_t */ -# endif -#endif - -/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and - * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even - * though the former does not conform to the LFS document), but considering - * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as - * equivalently requesting no 64-bit operations - */ -#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 -# undef _LARGEFILE64_SOURCE -#endif - -#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) -# define Z_HAVE_UNISTD_H -#endif -#ifndef Z_SOLO -# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) -# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ -# ifdef VMS -# include /* for off_t */ -# endif -# ifndef z_off_t -# define z_off_t off_t -# endif -# endif -#endif - -#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 -# define Z_LFS64 -#endif - -#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) -# define Z_LARGE64 -#endif - -#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) -# define Z_WANT64 -#endif - -#if !defined(SEEK_SET) && !defined(Z_SOLO) -# define SEEK_SET 0 /* Seek from beginning of file. */ -# define SEEK_CUR 1 /* Seek from current position. */ -# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ -#endif - -#ifndef z_off_t -# define z_off_t long -#endif - -#if !defined(_WIN32) && defined(Z_LARGE64) -# define z_off64_t off64_t -#else -# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) -# define z_off64_t __int64 -# else -# define z_off64_t z_off_t -# endif -#endif - -/* MVS linker does not support external names larger than 8 bytes */ -#if defined(__MVS__) - #pragma map(deflateInit_,"DEIN") - #pragma map(deflateInit2_,"DEIN2") - #pragma map(deflateEnd,"DEEND") - #pragma map(deflateBound,"DEBND") - #pragma map(inflateInit_,"ININ") - #pragma map(inflateInit2_,"ININ2") - #pragma map(inflateEnd,"INEND") - #pragma map(inflateSync,"INSY") - #pragma map(inflateSetDictionary,"INSEDI") - #pragma map(compressBound,"CMBND") - #pragma map(inflate_table,"INTABL") - #pragma map(inflate_fast,"INFA") - #pragma map(inflate_copyright,"INCOPY") -#endif - -#endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zlib.3 b/deps/zlib-1.2.11/zlib.3 deleted file mode 100644 index bda4eb0..0000000 --- a/deps/zlib-1.2.11/zlib.3 +++ /dev/null @@ -1,149 +0,0 @@ -.TH ZLIB 3 "15 Jan 2017" -.SH NAME -zlib \- compression/decompression library -.SH SYNOPSIS -[see -.I zlib.h -for full description] -.SH DESCRIPTION -The -.I zlib -library is a general purpose data compression library. -The code is thread safe, assuming that the standard library functions -used are thread safe, such as memory allocation routines. -It provides in-memory compression and decompression functions, -including integrity checks of the uncompressed data. -This version of the library supports only one compression method (deflation) -but other algorithms may be added later -with the same stream interface. -.LP -Compression can be done in a single step if the buffers are large enough -or can be done by repeated calls of the compression function. -In the latter case, -the application must provide more input and/or consume the output -(providing more output space) before each call. -.LP -The library also supports reading and writing files in -.IR gzip (1) -(.gz) format -with an interface similar to that of stdio. -.LP -The library does not install any signal handler. -The decoder checks the consistency of the compressed data, -so the library should never crash even in the case of corrupted input. -.LP -All functions of the compression library are documented in the file -.IR zlib.h . -The distribution source includes examples of use of the library -in the files -.I test/example.c -and -.IR test/minigzip.c, -as well as other examples in the -.IR examples/ -directory. -.LP -Changes to this version are documented in the file -.I ChangeLog -that accompanies the source. -.LP -.I zlib -is built in to many languages and operating systems, including but not limited to -Java, Python, .NET, PHP, Perl, Ruby, Swift, and Go. -.LP -An experimental package to read and write files in the .zip format, -written on top of -.I zlib -by Gilles Vollant (info@winimage.com), -is available at: -.IP -http://www.winimage.com/zLibDll/minizip.html -and also in the -.I contrib/minizip -directory of the main -.I zlib -source distribution. -.SH "SEE ALSO" -The -.I zlib -web site can be found at: -.IP -http://zlib.net/ -.LP -The data format used by the -.I zlib -library is described by RFC -(Request for Comments) 1950 to 1952 in the files: -.IP -http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format) -.br -http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format) -.br -http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format) -.LP -Mark Nelson wrote an article about -.I zlib -for the Jan. 1997 issue of Dr. Dobb's Journal; -a copy of the article is available at: -.IP -http://marknelson.us/1997/01/01/zlib-engine/ -.SH "REPORTING PROBLEMS" -Before reporting a problem, -please check the -.I zlib -web site to verify that you have the latest version of -.IR zlib ; -otherwise, -obtain the latest version and see if the problem still exists. -Please read the -.I zlib -FAQ at: -.IP -http://zlib.net/zlib_faq.html -.LP -before asking for help. -Send questions and/or comments to zlib@gzip.org, -or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). -.SH AUTHORS AND LICENSE -Version 1.2.11 -.LP -Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler -.LP -This software is provided 'as-is', without any express or implied -warranty. In no event will the authors be held liable for any damages -arising from the use of this software. -.LP -Permission is granted to anyone to use this software for any purpose, -including commercial applications, and to alter it and redistribute it -freely, subject to the following restrictions: -.LP -.nr step 1 1 -.IP \n[step]. 3 -The origin of this software must not be misrepresented; you must not -claim that you wrote the original software. If you use this software -in a product, an acknowledgment in the product documentation would be -appreciated but is not required. -.IP \n+[step]. -Altered source versions must be plainly marked as such, and must not be -misrepresented as being the original software. -.IP \n+[step]. -This notice may not be removed or altered from any source distribution. -.LP -Jean-loup Gailly Mark Adler -.br -jloup@gzip.org madler@alumni.caltech.edu -.LP -The deflate format used by -.I zlib -was defined by Phil Katz. -The deflate and -.I zlib -specifications were written by L. Peter Deutsch. -Thanks to all the people who reported problems and suggested various -improvements in -.IR zlib ; -who are too numerous to cite here. -.LP -UNIX manual page by R. P. C. Rodgers, -U.S. National Library of Medicine (rodgers@nlm.nih.gov). -.\" end of man page diff --git a/deps/zlib-1.2.11/zlib.3.pdf b/deps/zlib-1.2.11/zlib.3.pdf deleted file mode 100644 index 6fa519c..0000000 Binary files a/deps/zlib-1.2.11/zlib.3.pdf and /dev/null differ diff --git a/deps/zlib-1.2.11/zlib.h b/deps/zlib-1.2.11/zlib.h index f09cdaf..8096c3d 100644 --- a/deps/zlib-1.2.11/zlib.h +++ b/deps/zlib-1.2.11/zlib.h @@ -211,18 +211,7 @@ typedef gz_header FAR *gz_headerp; #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ -#define zlib_version zlibVersion() -/* for compatibility with versions < 1.0.2 */ - - - /* basic functions */ - -ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -/* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is not - compatible with the zlib.h header file used by the application. This check - is automatically made by deflateInit and inflateInit. - */ +/* basic functions */ /* ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); @@ -1171,513 +1160,7 @@ ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); state was inconsistent. */ -ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -/* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: - 1.0: size of uInt - 3.2: size of uLong - 5.4: size of voidpf (pointer) - 7.6: size of z_off_t - - Compiler, assembler, and debug options: - 8: ZLIB_DEBUG - 9: ASMV or ASMINF -- use ASM code - 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention - 11: 0 (reserved) - - One-time table building (smaller code, but not thread-safe if true): - 12: BUILDFIXED -- build static block decoding tables when needed - 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed - 14,15: 0 (reserved) - - Library content (indicates missing functionality): - 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking - deflate code when not needed) - 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect - and decode gzip streams (to avoid linking crc code) - 18-19: 0 (reserved) - - Operation variations (changes in library functionality): - 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate - 21: FASTEST -- deflate algorithm with only one, lowest compression level - 22,23: 0 (reserved) - - The sprintf variant used by gzprintf (zero is best): - 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format - 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! - 26: 0 = returns value, 1 = void -- 1 means inferred string length returned - - Remainder: - 27-31: 0 (reserved) - */ - -#ifndef Z_SOLO - - /* utility functions */ - -/* - The following utility functions are implemented on top of the basic - stream-oriented functions. To simplify the interface, some default options - are assumed (compression level and memory usage, standard memory allocation - functions). The source code of these utility functions can be modified if - you need special options. -*/ - -ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed data. compress() is equivalent to compress2() with a level - parameter of Z_DEFAULT_COMPRESSION. - - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. -*/ - -ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); -/* - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least the value returned by - compressBound(sourceLen). Upon exit, destLen is the actual size of the - compressed data. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ - -ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -/* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before a - compress() or compress2() call to allocate the destination buffer. -*/ - -ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); -/* - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total size - of the destination buffer, which must be large enough to hold the entire - uncompressed data. (The size of the uncompressed data must have been saved - previously by the compressor and transmitted to the decompressor by some - mechanism outside the scope of this compression library.) Upon exit, destLen - is the actual size of the uncompressed data. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In - the case where there is not enough room, uncompress() will fill the output - buffer with the uncompressed data up to that point. -*/ - -ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong *sourceLen)); -/* - Same as uncompress, except that sourceLen is a pointer, where the - length of the source is *sourceLen. On return, *sourceLen is the number of - source bytes consumed. -*/ - - /* gzip file access functions */ - -/* - This library supports reading and writing files in gzip (.gz) format with - an interface similar to that of stdio, using the functions that start with - "gz". The gzip format is different from the zlib format. gzip is a gzip - wrapper, documented in RFC 1952, wrapped around a deflate stream. -*/ - -typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ - -/* -ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); - - Opens a gzip (.gz) file for reading or writing. The mode parameter is as - in fopen ("rb" or "wb") but can also include a compression level ("wb9") or - a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only - compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' - for fixed code compression as in "wb9F". (See the description of - deflateInit2 for more information about the strategy parameter.) 'T' will - request transparent writing or appending with no compression and not using - the gzip format. - - "a" can be used instead of "w" to request that the gzip stream that will - be written be appended to the file. "+" will result in an error, since - reading and writing to the same gzip file is not supported. The addition of - "x" when writing will create the file exclusively, which fails if the file - already exists. On systems that support it, the addition of "e" when - reading or writing will set the flag to close the file on an execve() call. - - These functions, as well as gzip, will read and decode a sequence of gzip - streams in a file. The append function of gzopen() can be used to create - such a file. (Also see gzflush() for another way to do this.) When - appending, gzopen does not test whether the file begins with a gzip stream, - nor does it look for the end of the gzip streams to begin appending. gzopen - will simply append a gzip stream to the existing file. - - gzopen can be used to read a file which is not in gzip format; in this - case gzread will directly read from the file without decompression. When - reading, this will be detected automatically by looking for the magic two- - byte gzip header. - - gzopen returns NULL if the file could not be opened, if there was - insufficient memory to allocate the gzFile state, or if an invalid mode was - specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). - errno can be checked to determine if the reason gzopen failed was that the - file could not be opened. -*/ - -ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -/* - gzdopen associates a gzFile with the file descriptor fd. File descriptors - are obtained from calls like open, dup, creat, pipe or fileno (if the file - has been previously opened with fopen). The mode parameter is as in gzopen. - - The next call of gzclose on the returned gzFile will also close the file - descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor - fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, - mode);. The duplicated descriptor should be saved to avoid a leak, since - gzdopen does not close fd if it fails. If you are using fileno() to get the - file descriptor from a FILE *, then you will have to use dup() to avoid - double-close()ing the file descriptor. Both gzclose() and fclose() will - close the associated file descriptor, so they need to have different file - descriptors. - - gzdopen returns NULL if there was insufficient memory to allocate the - gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not - provided, or '+' was provided), or if fd is -1. The file descriptor is not - used until the next gz* read, write, seek, or close operation, so gzdopen - will not detect if fd is invalid (unless fd is -1). -*/ - -ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); -/* - Set the internal buffer size used by this library's functions. The - default buffer size is 8192 bytes. This function must be called after - gzopen() or gzdopen(), and before any other calls that read or write the - file. The buffer memory allocation is always deferred to the first read or - write. Three times that size in buffer space is allocated. A larger buffer - size of, for example, 64K or 128K bytes will noticeably increase the speed - of decompression (reading). - - The new buffer size also affects the maximum length for gzprintf(). - - gzbuffer() returns 0 on success, or -1 on failure, such as being called - too late. -*/ - -ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -/* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. Previously provided - data is flushed before the parameter change. - - gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not - opened for writing, Z_ERRNO if there is an error writing the flushed data, - or Z_MEM_ERROR if there is a memory allocation error. -*/ - -ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -/* - Reads the given number of uncompressed bytes from the compressed file. If - the input file is not in gzip format, gzread copies the given number of - bytes into the buffer directly from the file. - - After reaching the end of a gzip stream in the input, gzread will continue - to read, looking for another gzip stream. Any number of gzip streams may be - concatenated in the input file, and will all be decompressed by gzread(). - If something other than a gzip stream is encountered after a gzip stream, - that remaining trailing garbage is ignored (and no error is returned). - - gzread can be used to read a gzip file that is being concurrently written. - Upon reaching the end of the input, gzread will return with the available - data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then - gzclearerr can be used to clear the end of file indicator in order to permit - gzread to be tried again. Z_OK indicates that a gzip stream was completed - on the last gzread. Z_BUF_ERROR indicates that the input file ended in the - middle of a gzip stream. Note that gzread does not return -1 in the event - of an incomplete gzip stream. This error is deferred until gzclose(), which - will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip - stream. Alternatively, gzerror can be used before gzclose to detect this - case. - - gzread returns the number of uncompressed bytes actually read, less than - len for end of file, or -1 for error. If len is too large to fit in an int, - then nothing is read, -1 is returned, and the error state is set to - Z_STREAM_ERROR. -*/ - -ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems, - gzFile file)); -/* - Read up to nitems items of size size from file to buf, otherwise operating - as gzread() does. This duplicates the interface of stdio's fread(), with - size_t request and return types. If the library defines size_t, then - z_size_t is identical to size_t. If not, then z_size_t is an unsigned - integer type that can contain a pointer. - - gzfread() returns the number of full items read of size size, or zero if - the end of the file was reached and a full item could not be read, or if - there was an error. gzerror() must be consulted if zero is returned in - order to determine if there was an error. If the multiplication of size and - nitems overflows, i.e. the product does not fit in a z_size_t, then nothing - is read, zero is returned, and the error state is set to Z_STREAM_ERROR. - - In the event that the end of file is reached and only a partial item is - available at the end, i.e. the remaining uncompressed data length is not a - multiple of size, then the final partial item is nevetheless read into buf - and the end-of-file flag is set. The length of the partial item read is not - provided, but could be inferred from the result of gztell(). This behavior - is the same as the behavior of fread() implementations in common libraries, - but it prevents the direct use of gzfread() to read a concurrently written - file, reseting and retrying on end-of-file, when size is not 1. -*/ - -ZEXTERN int ZEXPORT gzwrite OF((gzFile file, - voidpc buf, unsigned len)); -/* - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of uncompressed bytes written or 0 in case of - error. -*/ - -ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size, - z_size_t nitems, gzFile file)); -/* - gzfwrite() writes nitems items of size size from buf to file, duplicating - the interface of stdio's fwrite(), with size_t request and return types. If - the library defines size_t, then z_size_t is identical to size_t. If not, - then z_size_t is an unsigned integer type that can contain a pointer. - - gzfwrite() returns the number of full items written of size size, or zero - if there was an error. If the multiplication of size and nitems overflows, - i.e. the product does not fit in a z_size_t, then nothing is written, zero - is returned, and the error state is set to Z_STREAM_ERROR. -*/ - -ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); -/* - Converts, formats, and writes the arguments to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written, or a negative zlib error code in case - of error. The number of uncompressed bytes written is limited to 8191, or - one less than the buffer size given to gzbuffer(). The caller should assure - that this limit is not exceeded. If it is exceeded, then gzprintf() will - return an error (0) with nothing written. In this case, there may also be a - buffer overflow with unpredictable consequences, which is possible only if - zlib was compiled with the insecure functions sprintf() or vsprintf() - because the secure snprintf() or vsnprintf() functions were not available. - This can be determined using zlibCompileFlags(). -*/ - -ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -/* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - - gzputs returns the number of characters written, or -1 in case of error. -*/ - -ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -/* - Reads bytes from the compressed file until len-1 characters are read, or a - newline character is read and transferred to buf, or an end-of-file - condition is encountered. If any characters are read or if len == 1, the - string is terminated with a null character. If no characters are read due - to an end-of-file or len < 1, then the buffer is left untouched. - - gzgets returns buf which is a null-terminated string, or it returns NULL - for end-of-file or in case of error. If there was an error, the contents at - buf are indeterminate. -*/ - -ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -/* - Writes c, converted to an unsigned char, into the compressed file. gzputc - returns the value that was written, or -1 in case of error. -*/ - -ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -/* - Reads one byte from the compressed file. gzgetc returns this byte or -1 - in case of end of file or error. This is implemented as a macro for speed. - As such, it does not do all of the checking the other functions do. I.e. - it does not check to see if file is NULL, nor whether the structure file - points to has been clobbered or not. -*/ - -ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -/* - Push one character back onto the stream to be read as the first character - on the next read. At least one character of push-back is allowed. - gzungetc() returns the character pushed, or -1 on failure. gzungetc() will - fail if c is -1, and may fail if a character has been pushed but not read - yet. If gzungetc is used immediately after gzopen or gzdopen, at least the - output buffer size of pushed characters is allowed. (See gzbuffer above.) - The pushed character will be discarded if the stream is repositioned with - gzseek() or gzrewind(). -*/ - -ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -/* - Flushes all pending output into the compressed file. The parameter flush - is as in the deflate() function. The return value is the zlib error number - (see function gzerror below). gzflush is only permitted when writing. - - If the flush parameter is Z_FINISH, the remaining data is written and the - gzip stream is completed in the output. If gzwrite() is called again, a new - gzip stream will be started in the output. gzread() is able to read such - concatenated gzip streams. - - gzflush should be called only when strictly necessary because it will - degrade compression if called too often. -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, - z_off_t offset, int whence)); - - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - uncompressed data stream. The whence parameter is defined as in lseek(2); - the value SEEK_END is not supported. - - If the file is opened for reading, this function is emulated but can be - extremely slow. If the file is opened for writing, only forward seeks are - supported; gzseek then compresses a sequence of zeroes up to the new - starting position. - - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error, in - particular if the file is opened for writing and the new starting position - would be before the current position. -*/ - -ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -/* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); - - Returns the starting position for the next gzread or gzwrite on the given - compressed file. This position represents a number of bytes in the - uncompressed data stream, and is zero when starting, even if appending or - reading a gzip stream from the middle of a file using gzdopen(). - - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) -*/ - -/* -ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); - - Returns the current offset in the file being read or written. This offset - includes the count of bytes that precede the gzip stream, for example when - appending or when using gzdopen() for reading. When reading, the offset - does not include as yet unused buffered input. This information can be used - for a progress indicator. On error, gzoffset() returns -1. -*/ - -ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -/* - Returns true (1) if the end-of-file indicator has been set while reading, - false (0) otherwise. Note that the end-of-file indicator is set only if the - read tried to go past the end of the input, but came up short. Therefore, - just like feof(), gzeof() may return false even if there is no more data to - read, in the event that the last read request was for the exact number of - bytes remaining in the input file. This will happen if the input file size - is an exact multiple of the buffer size. - - If gzeof() returns true, then the read functions will return no more data, - unless the end-of-file indicator is reset by gzclearerr() and the input file - has grown since the previous end of file was detected. -*/ - -ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -/* - Returns true (1) if file is being copied directly while reading, or false - (0) if file is a gzip stream being decompressed. - - If the input file is empty, gzdirect() will return true, since the input - does not contain a gzip stream. - - If gzdirect() is used immediately after gzopen() or gzdopen() it will - cause buffers to be allocated to allow reading the file to determine if it - is a gzip file. Therefore if gzbuffer() is used, it should be called before - gzdirect(). - - When writing, gzdirect() returns true (1) if transparent writing was - requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: - gzdirect() is not needed when writing. Transparent writing must be - explicitly requested, so the application already knows the answer. When - linking statically, using gzdirect() will include all of the zlib code for - gzip file reading and decompression, which may not be desired.) -*/ - -ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -/* - Flushes all pending output if necessary, closes the compressed file and - deallocates the (de)compression state. Note that once file is closed, you - cannot call gzerror with file, since its structures have been deallocated. - gzclose must not be called more than once on the same file, just as free - must not be called more than once on the same allocation. - - gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a - file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the - last read ended in the middle of a gzip stream, or Z_OK on success. -*/ - -ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); -ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); -/* - Same as gzclose(), but gzclose_r() is only for use when reading, and - gzclose_w() is only for use when writing or appending. The advantage to - using these instead of gzclose() is that they avoid linking in zlib - compression or decompression code that is not used when only reading or only - writing respectively. If gzclose() is used, then both compression and - decompression code will be included the application when linking to a static - zlib library. -*/ - -ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -/* - Returns the error message for the last error which occurred on the given - compressed file. errnum is set to zlib error number. If an error occurred - in the file system and not in the compression library, errnum is set to - Z_ERRNO and the application may consult errno to get the exact error code. - - The application must not modify the returned string. Future calls to - this function may invalidate the previously returned string. If file is - closed, then the string previously returned by gzerror will no longer be - available. - - gzerror() should be used to distinguish errors from end-of-file for those - functions above that do not distinguish those cases in their return values. -*/ - -ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -/* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip - file that is being written concurrently. -*/ - -#endif /* !Z_SOLO */ - - /* checksum functions */ +/* checksum functions */ /* These functions are not related to compression but are exported @@ -1710,18 +1193,6 @@ ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf, Same as adler32(), but with a size_t length. */ -/* -ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, - z_off_t len2)); - - Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 - and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for - each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note - that the z_off_t type (like off_t) is a signed integer. If len2 is - negative, the result has no meaning or utility. -*/ - ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); /* Update a running CRC-32 with the bytes buf[0..len-1] and return the @@ -1745,18 +1216,7 @@ ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf, Same as crc32(), but with a size_t length. */ -/* -ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); - - Combine two CRC-32 check values into one. For two sequences of bytes, - seq1 and seq2 with lengths len1 and len2, CRC-32 check values were - calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 - check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and - len2. -*/ - - - /* various hacks, don't look :) */ +/* various hacks, don't look :) */ /* deflateInit and inflateInit are macros to allow checking the zlib version * and the compiler's view of z_stream: @@ -1805,87 +1265,7 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZLIB_VERSION, (int)sizeof(z_stream)) #endif -#ifndef Z_SOLO - -/* gzgetc() macro and its supporting function and exposed data structure. Note - * that the real internal state is much larger than the exposed structure. - * This abbreviated structure exposes just enough for the gzgetc() macro. The - * user should not mess with these exposed elements, since their names or - * behavior could change in the future, perhaps even capriciously. They can - * only be used by the gzgetc() macro. You have been warned. - */ -struct gzFile_s { - unsigned have; - unsigned char *next; - z_off64_t pos; -}; -ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ -#ifdef Z_PREFIX_SET -# undef z_gzgetc -# define z_gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) -#else -# define gzgetc(g) \ - ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) -#endif - -/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or - * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if - * both are true, the application gets the *64 functions, and the regular - * functions are changed to 64 bits) -- in case these are set on systems - * without large file support, _LFS64_LARGEFILE must also be true - */ -#ifdef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); - ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); -#endif - -#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) -# ifdef Z_PREFIX_SET -# define z_gzopen z_gzopen64 -# define z_gzseek z_gzseek64 -# define z_gztell z_gztell64 -# define z_gzoffset z_gzoffset64 -# define z_adler32_combine z_adler32_combine64 -# define z_crc32_combine z_crc32_combine64 -# else -# define gzopen gzopen64 -# define gzseek gzseek64 -# define gztell gztell64 -# define gzoffset gzoffset64 -# define adler32_combine adler32_combine64 -# define crc32_combine crc32_combine64 -# endif -# ifndef Z_LARGE64 - ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -# endif -#else - ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); - ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); - ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); - ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); -#endif - -#else /* Z_SOLO */ - - ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); - -#endif /* !Z_SOLO */ - /* undocumented functions */ -ZEXTERN const char * ZEXPORT zError OF((int)); ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); @@ -1893,17 +1273,6 @@ ZEXTERN int ZEXPORT inflateValidate OF((z_streamp, int)); ZEXTERN unsigned long ZEXPORT inflateCodesUsed OF ((z_streamp)); ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); -#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO) -ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, - const char *mode)); -#endif -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifndef Z_SOLO -ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, - const char *format, - va_list va)); -# endif -#endif #ifdef __cplusplus } diff --git a/deps/zlib-1.2.11/zlib.map b/deps/zlib-1.2.11/zlib.map deleted file mode 100644 index 40fa9db..0000000 --- a/deps/zlib-1.2.11/zlib.map +++ /dev/null @@ -1,94 +0,0 @@ -ZLIB_1.2.0 { - global: - compressBound; - deflateBound; - inflateBack; - inflateBackEnd; - inflateBackInit_; - inflateCopy; - local: - deflate_copyright; - inflate_copyright; - inflate_fast; - inflate_table; - zcalloc; - zcfree; - z_errmsg; - gz_error; - gz_intmax; - _*; -}; - -ZLIB_1.2.0.2 { - gzclearerr; - gzungetc; - zlibCompileFlags; -} ZLIB_1.2.0; - -ZLIB_1.2.0.8 { - deflatePrime; -} ZLIB_1.2.0.2; - -ZLIB_1.2.2 { - adler32_combine; - crc32_combine; - deflateSetHeader; - inflateGetHeader; -} ZLIB_1.2.0.8; - -ZLIB_1.2.2.3 { - deflateTune; - gzdirect; -} ZLIB_1.2.2; - -ZLIB_1.2.2.4 { - inflatePrime; -} ZLIB_1.2.2.3; - -ZLIB_1.2.3.3 { - adler32_combine64; - crc32_combine64; - gzopen64; - gzseek64; - gztell64; - inflateUndermine; -} ZLIB_1.2.2.4; - -ZLIB_1.2.3.4 { - inflateReset2; - inflateMark; -} ZLIB_1.2.3.3; - -ZLIB_1.2.3.5 { - gzbuffer; - gzoffset; - gzoffset64; - gzclose_r; - gzclose_w; -} ZLIB_1.2.3.4; - -ZLIB_1.2.5.1 { - deflatePending; -} ZLIB_1.2.3.5; - -ZLIB_1.2.5.2 { - deflateResetKeep; - gzgetc_; - inflateResetKeep; -} ZLIB_1.2.5.1; - -ZLIB_1.2.7.1 { - inflateGetDictionary; - gzvprintf; -} ZLIB_1.2.5.2; - -ZLIB_1.2.9 { - inflateCodesUsed; - inflateValidate; - uncompress2; - gzfread; - gzfwrite; - deflateGetDictionary; - adler32_z; - crc32_z; -} ZLIB_1.2.7.1; diff --git a/deps/zlib-1.2.11/zlib.pc.cmakein b/deps/zlib-1.2.11/zlib.pc.cmakein deleted file mode 100644 index a5e6429..0000000 --- a/deps/zlib-1.2.11/zlib.pc.cmakein +++ /dev/null @@ -1,13 +0,0 @@ -prefix=@CMAKE_INSTALL_PREFIX@ -exec_prefix=@CMAKE_INSTALL_PREFIX@ -libdir=@INSTALL_LIB_DIR@ -sharedlibdir=@INSTALL_LIB_DIR@ -includedir=@INSTALL_INC_DIR@ - -Name: zlib -Description: zlib compression library -Version: @VERSION@ - -Requires: -Libs: -L${libdir} -L${sharedlibdir} -lz -Cflags: -I${includedir} diff --git a/deps/zlib-1.2.11/zlib.pc.in b/deps/zlib-1.2.11/zlib.pc.in deleted file mode 100644 index 7e5acf9..0000000 --- a/deps/zlib-1.2.11/zlib.pc.in +++ /dev/null @@ -1,13 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -sharedlibdir=@sharedlibdir@ -includedir=@includedir@ - -Name: zlib -Description: zlib compression library -Version: @VERSION@ - -Requires: -Libs: -L${libdir} -L${sharedlibdir} -lz -Cflags: -I${includedir} diff --git a/deps/zlib-1.2.11/zlib2ansi b/deps/zlib-1.2.11/zlib2ansi deleted file mode 100755 index 15e3e16..0000000 --- a/deps/zlib-1.2.11/zlib2ansi +++ /dev/null @@ -1,152 +0,0 @@ -#!/usr/bin/perl - -# Transform K&R C function definitions into ANSI equivalent. -# -# Author: Paul Marquess -# Version: 1.0 -# Date: 3 October 2006 - -# TODO -# -# Asumes no function pointer parameters. unless they are typedefed. -# Assumes no literal strings that look like function definitions -# Assumes functions start at the beginning of a line - -use strict; -use warnings; - -local $/; -$_ = <>; - -my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments - -my $d1 = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ; -my $decl = qr{ $sp (?: \w+ $sp )+ $d1 }xo ; -my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ; - - -while (s/^ - ( # Start $1 - ( # Start $2 - .*? # Minimal eat content - ( ^ \w [\w\s\*]+ ) # $3 -- function name - \s* # optional whitespace - ) # $2 - Matched up to before parameter list - - \( \s* # Literal "(" + optional whitespace - ( [^\)]+ ) # $4 - one or more anythings except ")" - \s* \) # optional whitespace surrounding a Literal ")" - - ( (?: $dList )+ ) # $5 - - $sp ^ { # literal "{" at start of line - ) # Remember to $1 - //xsom - ) -{ - my $all = $1 ; - my $prefix = $2; - my $param_list = $4 ; - my $params = $5; - - StripComments($params); - StripComments($param_list); - $param_list =~ s/^\s+//; - $param_list =~ s/\s+$//; - - my $i = 0 ; - my %pList = map { $_ => $i++ } - split /\s*,\s*/, $param_list; - my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ; - - my @params = split /\s*;\s*/, $params; - my @outParams = (); - foreach my $p (@params) - { - if ($p =~ /,/) - { - my @bits = split /\s*,\s*/, $p; - my $first = shift @bits; - $first =~ s/^\s*//; - push @outParams, $first; - $first =~ /^(\w+\s*)/; - my $type = $1 ; - push @outParams, map { $type . $_ } @bits; - } - else - { - $p =~ s/^\s+//; - push @outParams, $p; - } - } - - - my %tmp = map { /$pMatch/; $_ => $pList{$1} } - @outParams ; - - @outParams = map { " $_" } - sort { $tmp{$a} <=> $tmp{$b} } - @outParams ; - - print $prefix ; - print "(\n" . join(",\n", @outParams) . ")\n"; - print "{" ; - -} - -# Output any trailing code. -print ; -exit 0; - - -sub StripComments -{ - - no warnings; - - # Strip C & C++ coments - # From the perlfaq - $_[0] =~ - - s{ - /\* ## Start of /* ... */ comment - [^*]*\*+ ## Non-* followed by 1-or-more *'s - ( - [^/*][^*]*\*+ - )* ## 0-or-more things which don't start with / - ## but do end with '*' - / ## End of /* ... */ comment - - | ## OR C++ Comment - // ## Start of C++ comment // - [^\n]* ## followed by 0-or-more non end of line characters - - | ## OR various things which aren't comments: - - ( - " ## Start of " ... " string - ( - \\. ## Escaped char - | ## OR - [^"\\] ## Non "\ - )* - " ## End of " ... " string - - | ## OR - - ' ## Start of ' ... ' string - ( - \\. ## Escaped char - | ## OR - [^'\\] ## Non '\ - )* - ' ## End of ' ... ' string - - | ## OR - - . ## Anything other char - [^/"'\\]* ## Chars which doesn't start a comment, string or escape - ) - }{$2}gxs; - -} diff --git a/deps/zlib-1.2.11/zutil.c b/deps/zlib-1.2.11/zutil.c deleted file mode 100644 index a76c6b0..0000000 --- a/deps/zlib-1.2.11/zutil.c +++ /dev/null @@ -1,325 +0,0 @@ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2017 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* @(#) $Id$ */ - -#include "zutil.h" -#ifndef Z_SOLO -# include "gzguts.h" -#endif - -z_const char * const z_errmsg[10] = { - (z_const char *)"need dictionary", /* Z_NEED_DICT 2 */ - (z_const char *)"stream end", /* Z_STREAM_END 1 */ - (z_const char *)"", /* Z_OK 0 */ - (z_const char *)"file error", /* Z_ERRNO (-1) */ - (z_const char *)"stream error", /* Z_STREAM_ERROR (-2) */ - (z_const char *)"data error", /* Z_DATA_ERROR (-3) */ - (z_const char *)"insufficient memory", /* Z_MEM_ERROR (-4) */ - (z_const char *)"buffer error", /* Z_BUF_ERROR (-5) */ - (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */ - (z_const char *)"" -}; - - -const char * ZEXPORT zlibVersion() -{ - return ZLIB_VERSION; -} - -uLong ZEXPORT zlibCompileFlags() -{ - uLong flags; - - flags = 0; - switch ((int)(sizeof(uInt))) { - case 2: break; - case 4: flags += 1; break; - case 8: flags += 2; break; - default: flags += 3; - } - switch ((int)(sizeof(uLong))) { - case 2: break; - case 4: flags += 1 << 2; break; - case 8: flags += 2 << 2; break; - default: flags += 3 << 2; - } - switch ((int)(sizeof(voidpf))) { - case 2: break; - case 4: flags += 1 << 4; break; - case 8: flags += 2 << 4; break; - default: flags += 3 << 4; - } - switch ((int)(sizeof(z_off_t))) { - case 2: break; - case 4: flags += 1 << 6; break; - case 8: flags += 2 << 6; break; - default: flags += 3 << 6; - } -#ifdef ZLIB_DEBUG - flags += 1 << 8; -#endif -#if defined(ASMV) || defined(ASMINF) - flags += 1 << 9; -#endif -#ifdef ZLIB_WINAPI - flags += 1 << 10; -#endif -#ifdef BUILDFIXED - flags += 1 << 12; -#endif -#ifdef DYNAMIC_CRC_TABLE - flags += 1 << 13; -#endif -#ifdef NO_GZCOMPRESS - flags += 1L << 16; -#endif -#ifdef NO_GZIP - flags += 1L << 17; -#endif -#ifdef PKZIP_BUG_WORKAROUND - flags += 1L << 20; -#endif -#ifdef FASTEST - flags += 1L << 21; -#endif -#if defined(STDC) || defined(Z_HAVE_STDARG_H) -# ifdef NO_vsnprintf - flags += 1L << 25; -# ifdef HAS_vsprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_vsnprintf_void - flags += 1L << 26; -# endif -# endif -#else - flags += 1L << 24; -# ifdef NO_snprintf - flags += 1L << 25; -# ifdef HAS_sprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_snprintf_void - flags += 1L << 26; -# endif -# endif -#endif - return flags; -} - -#ifdef ZLIB_DEBUG -#include -# ifndef verbose -# define verbose 0 -# endif -int ZLIB_INTERNAL z_verbose = verbose; - -void ZLIB_INTERNAL z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - exit(1); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -const char * ZEXPORT zError(err) - int err; -{ - return ERR_MSG(err); -} - -#if defined(_WIN32_WCE) - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. - */ - int errno = 0; -#endif - -#ifndef HAVE_MEMCPY - -void ZLIB_INTERNAL zmemcpy(dest, source, len) - Bytef* dest; - const Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int ZLIB_INTERNAL zmemcmp(s1, s2, len) - const Bytef* s1; - const Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void ZLIB_INTERNAL zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - -#ifndef Z_SOLO - -#ifdef SYS16BIT - -#ifdef __TURBOC__ -/* Turbo C in 16-bit mode */ - -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf; - ulg bsize = (ulg)items*size; - - (void)opaque; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) -{ - int n; - - (void)opaque; - - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - Assert(0, "zcfree: ptr not found"); -} - -#endif /* __TURBOC__ */ - - -#ifdef M_I86 -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size) -{ - (void)opaque; - return _halloc((long)items, size); -} - -void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) -{ - (void)opaque; - _hfree(ptr); -} - -#endif /* M_I86 */ - -#endif /* SYS16BIT */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf ZLIB_INTERNAL zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - (void)opaque; - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void ZLIB_INTERNAL zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - (void)opaque; - free(ptr); -} - -#endif /* MY_ZCALLOC */ - -#endif /* !Z_SOLO */ diff --git a/deps/zlib-1.2.11/zutil.h b/deps/zlib-1.2.11/zutil.h index b0388b0..848853f 100644 --- a/deps/zlib-1.2.11/zutil.h +++ b/deps/zlib-1.2.11/zutil.h @@ -21,17 +21,9 @@ #include "zlib.h" -#if defined(STDC) && !defined(Z_SOLO) -# if !(defined(_WIN32_WCE) && defined(_MSC_VER)) -# include -# endif -# include -# include -#endif - -#ifdef Z_SOLO - typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ -#endif +#include +#include +#include #ifndef local # define local static @@ -80,178 +72,12 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ - /* target dependencies */ +/* common defaults */ +/* functions */ -#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) -# define OS_CODE 0x00 -# ifndef Z_SOLO -# if defined(__TURBOC__) || defined(__BORLANDC__) -# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) - /* Allow compilation with ANSI keywords only enabled */ - void _Cdecl farfree( void *block ); - void *_Cdecl farmalloc( unsigned long nbytes ); -# else -# include -# endif -# else /* MSC or DJGPP */ -# include -# endif -# endif -#endif - -#ifdef AMIGA -# define OS_CODE 1 -#endif - -#if defined(VAXC) || defined(VMS) -# define OS_CODE 2 -#endif - -#ifdef __370__ -# if __TARGET_LIB__ < 0x20000000 -# define OS_CODE 4 -# elif __TARGET_LIB__ < 0x40000000 -# define OS_CODE 11 -# else -# define OS_CODE 8 -# endif -#endif - -#if defined(ATARI) || defined(atarist) -# define OS_CODE 5 -#endif - -#ifdef OS2 -# define OS_CODE 6 -# if defined(M_I86) && !defined(Z_SOLO) -# include -# endif -#endif - -#if defined(MACOS) || defined(TARGET_OS_MAC) -# define OS_CODE 7 -# ifndef Z_SOLO -# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os -# include /* for fdopen */ -# else -# ifndef fdopen -# define fdopen(fd,mode) NULL /* No fdopen() */ -# endif -# endif -# endif -#endif - -#ifdef __acorn -# define OS_CODE 13 -#endif - -#if defined(WIN32) && !defined(__CYGWIN__) -# define OS_CODE 10 -#endif - -#ifdef _BEOS_ -# define OS_CODE 16 -#endif - -#ifdef __TOS_OS400__ -# define OS_CODE 18 -#endif - -#ifdef __APPLE__ -# define OS_CODE 19 -#endif - -#if defined(_BEOS_) || defined(RISCOS) -# define fdopen(fd,mode) NULL /* No fdopen() */ -#endif - -#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX -# if defined(_WIN32_WCE) -# define fdopen(fd,mode) NULL /* No fdopen() */ -# ifndef _PTRDIFF_T_DEFINED - typedef int ptrdiff_t; -# define _PTRDIFF_T_DEFINED -# endif -# else -# define fdopen(fd,type) _fdopen(fd,type) -# endif -#endif - -#if defined(__BORLANDC__) && !defined(MSDOS) - #pragma warn -8004 - #pragma warn -8008 - #pragma warn -8066 -#endif - -/* provide prototypes for these when building zlib without LFS */ -#if !defined(_WIN32) && \ - (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) - ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); - ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); -#endif - - /* common defaults */ - -#ifndef OS_CODE -# define OS_CODE 3 /* assume Unix */ -#endif - - /* functions */ - -#if defined(pyr) || defined(Z_SOLO) -# define NO_MEMCPY -#endif -#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) - /* Use our own functions for small and medium model with MSC <= 5.0. - * You may have to use the same strategy for Borland C (untested). - * The __SC__ check is for Symantec. - */ -# define NO_MEMCPY -#endif -#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) -# define HAVE_MEMCPY -#endif -#ifdef HAVE_MEMCPY -# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ -# define zmemcpy _fmemcpy -# define zmemcmp _fmemcmp -# define zmemzero(dest, len) _fmemset(dest, 0, len) -# else -# define zmemcpy memcpy -# define zmemcmp memcmp -# define zmemzero(dest, len) memset(dest, 0, len) -# endif -#else - void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); - int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); - void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); -#endif - -/* Diagnostic functions */ -#ifdef ZLIB_DEBUG -# include - extern int ZLIB_INTERNAL z_verbose; - extern void ZLIB_INTERNAL z_error OF((char *m)); -# define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) {if (z_verbose>=0) fprintf x ;} -# define Tracev(x) {if (z_verbose>0) fprintf x ;} -# define Tracevv(x) {if (z_verbose>1) fprintf x ;} -# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} -# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -#ifndef Z_SOLO - voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, - unsigned size)); - void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); -#endif +#define zmemcpy memcpy +#define zmemcmp memcmp +#define zmemzero(dest, len) memset(dest, 0, len) #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size))