diff --git a/Makefile.common b/Makefile.common old mode 100644 new mode 100755 index bf5d334..1635c35 --- a/Makefile.common +++ b/Makefile.common @@ -40,7 +40,8 @@ ZLIB_SOURCES_C = \ $(DEPS_DIR)/zlib-1.2.11/crc32.c \ $(DEPS_DIR)/zlib-1.2.11/inffast.c \ $(DEPS_DIR)/zlib-1.2.11/inflate.c \ - $(DEPS_DIR)/zlib-1.2.11/inftrees.c + $(DEPS_DIR)/zlib-1.2.11/inftrees.c \ + $(DEPS_DIR)/zlib-1.2.11/zutil.c ifneq (,$(findstring msvc2003,$(platform))) INCFLAGS += -I$(LIBRETRO_COMM_DIR)/include/compat/msvc diff --git a/deps/zlib-1.2.11/CMakeLists.txt b/deps/zlib-1.2.11/CMakeLists.txt new file mode 100755 index 0000000..37b04b9 --- /dev/null +++ b/deps/zlib-1.2.11/CMakeLists.txt @@ -0,0 +1,27 @@ +add_library(zlib STATIC + zconf.h + zlib.h + adler32.c + compress.c + crc32.c + crc32.h + deflate.c + deflate.h + gzguts.h + infback.c + inffast.c + inffast.h + inffixed.h + inflate.c + inflate.h + inftrees.c + inftrees.h + trees.c + trees.h + uncompr.c + zutil.c + zutil.h +) + +target_include_directories(zlib PRIVATE "${CMAKE_CURRENT_SOURCE_DIR}") +target_include_directories(zlib INTERFACE "${CMAKE_CURRENT_SOURCE_DIR}") diff --git a/deps/zlib-1.2.11/ChangeLog b/deps/zlib-1.2.11/ChangeLog new file mode 100755 index 0000000..30199a6 --- /dev/null +++ b/deps/zlib-1.2.11/ChangeLog @@ -0,0 +1,1515 @@ + + ChangeLog file for zlib + +Changes in 1.2.11 (15 Jan 2017) +- Fix deflate stored bug when pulling last block from window +- Permit immediate deflateParams changes before any deflate input + +Changes in 1.2.10 (2 Jan 2017) +- Avoid warnings on snprintf() return value +- Fix bug in deflate_stored() for zero-length input +- Fix bug in gzwrite.c that produced corrupt gzip files +- Remove files to be installed before copying them in Makefile.in +- Add warnings when compiling with assembler code + +Changes in 1.2.9 (31 Dec 2016) +- Fix contrib/minizip to permit unzipping with desktop API [Zouzou] +- Improve contrib/blast to return unused bytes +- Assure that gzoffset() is correct when appending +- Improve compress() and uncompress() to support large lengths +- Fix bug in test/example.c where error code not saved +- Remedy Coverity warning [Randers-Pehrson] +- Improve speed of gzprintf() in transparent mode +- Fix inflateInit2() bug when windowBits is 16 or 32 +- Change DEBUG macro to ZLIB_DEBUG +- Avoid uninitialized access by gzclose_w() +- Allow building zlib outside of the source directory +- Fix bug that accepted invalid zlib header when windowBits is zero +- Fix gzseek() problem on MinGW due to buggy _lseeki64 there +- Loop on write() calls in gzwrite.c in case of non-blocking I/O +- Add --warn (-w) option to ./configure for more compiler warnings +- Reject a window size of 256 bytes if not using the zlib wrapper +- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE +- Add --debug (-d) option to ./configure to define ZLIB_DEBUG +- Fix bugs in creating a very large gzip header +- Add uncompress2() function, which returns the input size used +- Assure that deflateParams() will not switch functions mid-block +- Dramatically speed up deflation for level 0 (storing) +- Add gzfread(), duplicating the interface of fread() +- Add gzfwrite(), duplicating the interface of fwrite() +- Add deflateGetDictionary() function +- Use snprintf() for later versions of Microsoft C +- Fix *Init macros to use z_ prefix when requested +- Replace as400 with os400 for OS/400 support [Monnerat] +- Add crc32_z() and adler32_z() functions with size_t lengths +- Update Visual Studio project files [AraHaan] + +Changes in 1.2.8 (28 Apr 2013) +- Update contrib/minizip/iowin32.c for Windows RT [Vollant] +- Do not force Z_CONST for C++ +- Clean up contrib/vstudio [Roß] +- Correct spelling error in zlib.h +- Fix mixed line endings in contrib/vstudio + +Changes in 1.2.7.3 (13 Apr 2013) +- Fix version numbers and DLL names in contrib/vstudio/*/zlib.rc + +Changes in 1.2.7.2 (13 Apr 2013) +- Change check for a four-byte type back to hexadecimal +- Fix typo in win32/Makefile.msc +- Add casts in gzwrite.c for pointer differences + +Changes in 1.2.7.1 (24 Mar 2013) +- Replace use of unsafe string functions with snprintf if available +- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink] +- Fix gzgetc undefine when Z_PREFIX set [Turk] +- Eliminate use of mktemp in Makefile (not always available) +- Fix bug in 'F' mode for gzopen() +- Add inflateGetDictionary() function +- Correct comment in deflate.h +- Use _snprintf for snprintf in Microsoft C +- On Darwin, only use /usr/bin/libtool if libtool is not Apple +- Delete "--version" file if created by "ar --version" [Richard G.] +- Fix configure check for veracity of compiler error return codes +- Fix CMake compilation of static lib for MSVC2010 x64 +- Remove unused variable in infback9.c +- Fix argument checks in gzlog_compress() and gzlog_write() +- Clean up the usage of z_const and respect const usage within zlib +- Clean up examples/gzlog.[ch] comparisons of different types +- Avoid shift equal to bits in type (caused endless loop) +- Fix uninitialized value bug in gzputc() introduced by const patches +- Fix memory allocation error in examples/zran.c [Nor] +- Fix bug where gzopen(), gzclose() would write an empty file +- Fix bug in gzclose() when gzwrite() runs out of memory +- Check for input buffer malloc failure in examples/gzappend.c +- Add note to contrib/blast to use binary mode in stdio +- Fix comparisons of differently signed integers in contrib/blast +- Check for invalid code length codes in contrib/puff +- Fix serious but very rare decompression bug in inftrees.c +- Update inflateBack() comments, since inflate() can be faster +- Use underscored I/O function names for WINAPI_FAMILY +- Add _tr_flush_bits to the external symbols prefixed by --zprefix +- Add contrib/vstudio/vc10 pre-build step for static only +- Quote --version-script argument in CMakeLists.txt +- Don't specify --version-script on Apple platforms in CMakeLists.txt +- Fix casting error in contrib/testzlib/testzlib.c +- Fix types in contrib/minizip to match result of get_crc_table() +- Simplify contrib/vstudio/vc10 with 'd' suffix +- Add TOP support to win32/Makefile.msc +- Suport i686 and amd64 assembler builds in CMakeLists.txt +- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h +- Add vc11 and vc12 build files to contrib/vstudio +- Add gzvprintf() as an undocumented function in zlib +- Fix configure for Sun shell +- Remove runtime check in configure for four-byte integer type +- Add casts and consts to ease user conversion to C++ +- Add man pages for minizip and miniunzip +- In Makefile uninstall, don't rm if preceding cd fails +- Do not return Z_BUF_ERROR if deflateParam() has nothing to write + +Changes in 1.2.7 (2 May 2012) +- Replace use of memmove() with a simple copy for portability +- Test for existence of strerror +- Restore gzgetc_ for backward compatibility with 1.2.6 +- Fix build with non-GNU make on Solaris +- Require gcc 4.0 or later on Mac OS X to use the hidden attribute +- Include unistd.h for Watcom C +- Use __WATCOMC__ instead of __WATCOM__ +- Do not use the visibility attribute if NO_VIZ defined +- Improve the detection of no hidden visibility attribute +- Avoid using __int64 for gcc or solo compilation +- Cast to char * in gzprintf to avoid warnings [Zinser] +- Fix make_vms.com for VAX [Zinser] +- Don't use library or built-in byte swaps +- Simplify test and use of gcc hidden attribute +- Fix bug in gzclose_w() when gzwrite() fails to allocate memory +- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen() +- Fix bug in test/minigzip.c for configure --solo +- Fix contrib/vstudio project link errors [Mohanathas] +- Add ability to choose the builder in make_vms.com [Schweda] +- Add DESTDIR support to mingw32 win32/Makefile.gcc +- Fix comments in win32/Makefile.gcc for proper usage +- Allow overriding the default install locations for cmake +- Generate and install the pkg-config file with cmake +- Build both a static and a shared version of zlib with cmake +- Include version symbols for cmake builds +- If using cmake with MSVC, add the source directory to the includes +- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta] +- Move obsolete emx makefile to old [Truta] +- Allow the use of -Wundef when compiling or using zlib +- Avoid the use of the -u option with mktemp +- Improve inflate() documentation on the use of Z_FINISH +- Recognize clang as gcc +- Add gzopen_w() in Windows for wide character path names +- Rename zconf.h in CMakeLists.txt to move it out of the way +- Add source directory in CMakeLists.txt for building examples +- Look in build directory for zlib.pc in CMakeLists.txt +- Remove gzflags from zlibvc.def in vc9 and vc10 +- Fix contrib/minizip compilation in the MinGW environment +- Update ./configure for Solaris, support --64 [Mooney] +- Remove -R. from Solaris shared build (possible security issue) +- Avoid race condition for parallel make (-j) running example +- Fix type mismatch between get_crc_table() and crc_table +- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler] +- Fix the path to zlib.map in CMakeLists.txt +- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe] +- Add instructions to win32/Makefile.gcc for shared install [Torri] + +Changes in 1.2.6.1 (12 Feb 2012) +- Avoid the use of the Objective-C reserved name "id" +- Include io.h in gzguts.h for Microsoft compilers +- Fix problem with ./configure --prefix and gzgetc macro +- Include gz_header definition when compiling zlib solo +- Put gzflags() functionality back in zutil.c +- Avoid library header include in crc32.c for Z_SOLO +- Use name in GCC_CLASSIC as C compiler for coverage testing, if set +- Minor cleanup in contrib/minizip/zip.c [Vollant] +- Update make_vms.com [Zinser] +- Remove unnecessary gzgetc_ function +- Use optimized byte swap operations for Microsoft and GNU [Snyder] +- Fix minor typo in zlib.h comments [Rzesniowiecki] + +Changes in 1.2.6 (29 Jan 2012) +- Update the Pascal interface in contrib/pascal +- Fix function numbers for gzgetc_ in zlibvc.def files +- Fix configure.ac for contrib/minizip [Schiffer] +- Fix large-entry detection in minizip on 64-bit systems [Schiffer] +- Have ./configure use the compiler return code for error indication +- Fix CMakeLists.txt for cross compilation [McClure] +- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes] +- Fix compilation of contrib/minizip on FreeBSD [Marquez] +- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath] +- Include io.h for Turbo C / Borland C on all platforms [Truta] +- Make version explicit in contrib/minizip/configure.ac [Bosmans] +- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant] +- Minor cleanup up contrib/minizip/unzip.c [Vollant] +- Fix bug when compiling minizip with C++ [Vollant] +- Protect for long name and extra fields in contrib/minizip [Vollant] +- Avoid some warnings in contrib/minizip [Vollant] +- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip +- Add missing libs to minizip linker command +- Add support for VPATH builds in contrib/minizip +- Add an --enable-demos option to contrib/minizip/configure +- Add the generation of configure.log by ./configure +- Exit when required parameters not provided to win32/Makefile.gcc +- Have gzputc return the character written instead of the argument +- Use the -m option on ldconfig for BSD systems [Tobias] +- Correct in zlib.map when deflateResetKeep was added + +Changes in 1.2.5.3 (15 Jan 2012) +- Restore gzgetc function for binary compatibility +- Do not use _lseeki64 under Borland C++ [Truta] +- Update win32/Makefile.msc to build test/*.c [Truta] +- Remove old/visualc6 given CMakefile and other alternatives +- Update AS400 build files and documentation [Monnerat] +- Update win32/Makefile.gcc to build test/*.c [Truta] +- Permit stronger flushes after Z_BLOCK flushes +- Avoid extraneous empty blocks when doing empty flushes +- Permit Z_NULL arguments to deflatePending +- Allow deflatePrime() to insert bits in the middle of a stream +- Remove second empty static block for Z_PARTIAL_FLUSH +- Write out all of the available bits when using Z_BLOCK +- Insert the first two strings in the hash table after a flush + +Changes in 1.2.5.2 (17 Dec 2011) +- fix ld error: unable to find version dependency 'ZLIB_1.2.5' +- use relative symlinks for shared libs +- Avoid searching past window for Z_RLE strategy +- Assure that high-water mark initialization is always applied in deflate +- Add assertions to fill_window() in deflate.c to match comments +- Update python link in README +- Correct spelling error in gzread.c +- Fix bug in gzgets() for a concatenated empty gzip stream +- Correct error in comment for gz_make() +- Change gzread() and related to ignore junk after gzip streams +- Allow gzread() and related to continue after gzclearerr() +- Allow gzrewind() and gzseek() after a premature end-of-file +- Simplify gzseek() now that raw after gzip is ignored +- Change gzgetc() to a macro for speed (~40% speedup in testing) +- Fix gzclose() to return the actual error last encountered +- Always add large file support for windows +- Include zconf.h for windows large file support +- Include zconf.h.cmakein for windows large file support +- Update zconf.h.cmakein on make distclean +- Merge vestigial vsnprintf determination from zutil.h to gzguts.h +- Clarify how gzopen() appends in zlib.h comments +- Correct documentation of gzdirect() since junk at end now ignored +- Add a transparent write mode to gzopen() when 'T' is in the mode +- Update python link in zlib man page +- Get inffixed.h and MAKEFIXED result to match +- Add a ./config --solo option to make zlib subset with no library use +- Add undocumented inflateResetKeep() function for CAB file decoding +- Add --cover option to ./configure for gcc coverage testing +- Add #define ZLIB_CONST option to use const in the z_stream interface +- Add comment to gzdopen() in zlib.h to use dup() when using fileno() +- Note behavior of uncompress() to provide as much data as it can +- Add files in contrib/minizip to aid in building libminizip +- Split off AR options in Makefile.in and configure +- Change ON macro to Z_ARG to avoid application conflicts +- Facilitate compilation with Borland C++ for pragmas and vsnprintf +- Include io.h for Turbo C / Borland C++ +- Move example.c and minigzip.c to test/ +- Simplify incomplete code table filling in inflate_table() +- Remove code from inflate.c and infback.c that is impossible to execute +- Test the inflate code with full coverage +- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw) +- Add deflateResetKeep and fix inflateResetKeep to retain dictionary +- Fix gzwrite.c to accommodate reduced memory zlib compilation +- Have inflate() with Z_FINISH avoid the allocation of a window +- Do not set strm->adler when doing raw inflate +- Fix gzeof() to behave just like feof() when read is not past end of file +- Fix bug in gzread.c when end-of-file is reached +- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF +- Document gzread() capability to read concurrently written files +- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo] + +Changes in 1.2.5.1 (10 Sep 2011) +- Update FAQ entry on shared builds (#13) +- Avoid symbolic argument to chmod in Makefile.in +- Fix bug and add consts in contrib/puff [Oberhumer] +- Update contrib/puff/zeros.raw test file to have all block types +- Add full coverage test for puff in contrib/puff/Makefile +- Fix static-only-build install in Makefile.in +- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno] +- Add libz.a dependency to shared in Makefile.in for parallel builds +- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out +- Replace $(...) with `...` in configure for non-bash sh [Bowler] +- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen] +- Add solaris* to Linux* in configure to allow gcc use [Groffen] +- Add *bsd* to Linux* case in configure [Bar-Lev] +- Add inffast.obj to dependencies in win32/Makefile.msc +- Correct spelling error in deflate.h [Kohler] +- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc +- Add test to configure for GNU C looking for gcc in output of $cc -v +- Add zlib.pc generation to win32/Makefile.gcc [Weigelt] +- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not +- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense +- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser) +- Make stronger test in zconf.h to include unistd.h for LFS +- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack] +- Fix zlib.h LFS support when Z_PREFIX used +- Add updated as400 support (removed from old) [Monnerat] +- Avoid deflate sensitivity to volatile input data +- Avoid division in adler32_combine for NO_DIVIDE +- Clarify the use of Z_FINISH with deflateBound() amount of space +- Set binary for output file in puff.c +- Use u4 type for crc_table to avoid conversion warnings +- Apply casts in zlib.h to avoid conversion warnings +- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller] +- Improve inflateSync() documentation to note indeterminancy +- Add deflatePending() function to return the amount of pending output +- Correct the spelling of "specification" in FAQ [Randers-Pehrson] +- Add a check in configure for stdarg.h, use for gzprintf() +- Check that pointers fit in ints when gzprint() compiled old style +- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler] +- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt] +- Add debug records in assmebler code [Londer] +- Update RFC references to use http://tools.ietf.org/html/... [Li] +- Add --archs option, use of libtool to configure for Mac OS X [Borstel] + +Changes in 1.2.5 (19 Apr 2010) +- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev] +- Default to libdir as sharedlibdir in configure [Nieder] +- Update copyright dates on modified source files +- Update trees.c to be able to generate modified trees.h +- Exit configure for MinGW, suggesting win32/Makefile.gcc +- Check for NULL path in gz_open [Homurlu] + +Changes in 1.2.4.5 (18 Apr 2010) +- Set sharedlibdir in configure [Torok] +- Set LDFLAGS in Makefile.in [Bar-Lev] +- Avoid mkdir objs race condition in Makefile.in [Bowler] +- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays +- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C +- Don't use hidden attribute when it is a warning generator (e.g. Solaris) + +Changes in 1.2.4.4 (18 Apr 2010) +- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok] +- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty +- Try to use bash or ksh regardless of functionality of /bin/sh +- Fix configure incompatibility with NetBSD sh +- Remove attempt to run under bash or ksh since have better NetBSD fix +- Fix win32/Makefile.gcc for MinGW [Bar-Lev] +- Add diagnostic messages when using CROSS_PREFIX in configure +- Added --sharedlibdir option to configure [Weigelt] +- Use hidden visibility attribute when available [Frysinger] + +Changes in 1.2.4.3 (10 Apr 2010) +- Only use CROSS_PREFIX in configure for ar and ranlib if they exist +- Use CROSS_PREFIX for nm [Bar-Lev] +- Assume _LARGEFILE64_SOURCE defined is equivalent to true +- Avoid use of undefined symbols in #if with && and || +- Make *64 prototypes in gzguts.h consistent with functions +- Add -shared load option for MinGW in configure [Bowler] +- Move z_off64_t to public interface, use instead of off64_t +- Remove ! from shell test in configure (not portable to Solaris) +- Change +0 macro tests to -0 for possibly increased portability + +Changes in 1.2.4.2 (9 Apr 2010) +- Add consistent carriage returns to readme.txt's in masmx86 and masmx64 +- Really provide prototypes for *64 functions when building without LFS +- Only define unlink() in minigzip.c if unistd.h not included +- Update README to point to contrib/vstudio project files +- Move projects/vc6 to old/ and remove projects/ +- Include stdlib.h in minigzip.c for setmode() definition under WinCE +- Clean up assembler builds in win32/Makefile.msc [Rowe] +- Include sys/types.h for Microsoft for off_t definition +- Fix memory leak on error in gz_open() +- Symbolize nm as $NM in configure [Weigelt] +- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt] +- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined +- Fix bug in gzeof() to take into account unused input data +- Avoid initialization of structures with variables in puff.c +- Updated win32/README-WIN32.txt [Rowe] + +Changes in 1.2.4.1 (28 Mar 2010) +- Remove the use of [a-z] constructs for sed in configure [gentoo 310225] +- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech] +- Restore "for debugging" comment on sprintf() in gzlib.c +- Remove fdopen for MVS from gzguts.h +- Put new README-WIN32.txt in win32 [Rowe] +- Add check for shell to configure and invoke another shell if needed +- Fix big fat stinking bug in gzseek() on uncompressed files +- Remove vestigial F_OPEN64 define in zutil.h +- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE +- Avoid errors on non-LFS systems when applications define LFS macros +- Set EXE to ".exe" in configure for MINGW [Kahle] +- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill] +- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev] +- Add DLL install in win32/makefile.gcc [Bar-Lev] +- Allow Linux* or linux* from uname in configure [Bar-Lev] +- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev] +- Add cross-compilation prefixes to configure [Bar-Lev] +- Match type exactly in gz_load() invocation in gzread.c +- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func +- Provide prototypes for *64 functions when building zlib without LFS +- Don't use -lc when linking shared library on MinGW +- Remove errno.h check in configure and vestigial errno code in zutil.h + +Changes in 1.2.4 (14 Mar 2010) +- Fix VER3 extraction in configure for no fourth subversion +- Update zlib.3, add docs to Makefile.in to make .pdf out of it +- Add zlib.3.pdf to distribution +- Don't set error code in gzerror() if passed pointer is NULL +- Apply destination directory fixes to CMakeLists.txt [Lowman] +- Move #cmakedefine's to a new zconf.in.cmakein +- Restore zconf.h for builds that don't use configure or cmake +- Add distclean to dummy Makefile for convenience +- Update and improve INDEX, README, and FAQ +- Update CMakeLists.txt for the return of zconf.h [Lowman] +- Update contrib/vstudio/vc9 and vc10 [Vollant] +- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc +- Apply license and readme changes to contrib/asm686 [Raiter] +- Check file name lengths and add -c option in minigzip.c [Li] +- Update contrib/amd64 and contrib/masmx86/ [Vollant] +- Avoid use of "eof" parameter in trees.c to not shadow library variable +- Update make_vms.com for removal of zlibdefs.h [Zinser] +- Update assembler code and vstudio projects in contrib [Vollant] +- Remove outdated assembler code contrib/masm686 and contrib/asm586 +- Remove old vc7 and vc8 from contrib/vstudio +- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe] +- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open() +- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant] +- Remove *64 functions from win32/zlib.def (they're not 64-bit yet) +- Fix bug in void-returning vsprintf() case in gzwrite.c +- Fix name change from inflate.h in contrib/inflate86/inffas86.c +- Check if temporary file exists before removing in make_vms.com [Zinser] +- Fix make install and uninstall for --static option +- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta] +- Update readme.txt in contrib/masmx64 and masmx86 to assemble + +Changes in 1.2.3.9 (21 Feb 2010) +- Expunge gzio.c +- Move as400 build information to old +- Fix updates in contrib/minizip and contrib/vstudio +- Add const to vsnprintf test in configure to avoid warnings [Weigelt] +- Delete zconf.h (made by configure) [Weigelt] +- Change zconf.in.h to zconf.h.in per convention [Weigelt] +- Check for NULL buf in gzgets() +- Return empty string for gzgets() with len == 1 (like fgets()) +- Fix description of gzgets() in zlib.h for end-of-file, NULL return +- Update minizip to 1.1 [Vollant] +- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c +- Note in zlib.h that gzerror() should be used to distinguish from EOF +- Remove use of snprintf() from gzlib.c +- Fix bug in gzseek() +- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant] +- Fix zconf.h generation in CMakeLists.txt [Lowman] +- Improve comments in zconf.h where modified by configure + +Changes in 1.2.3.8 (13 Feb 2010) +- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer] +- Use z_off64_t in gz_zero() and gz_skip() to match state->skip +- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t) +- Revert to Makefile.in from 1.2.3.6 (live with the clutter) +- Fix missing error return in gzflush(), add zlib.h note +- Add *64 functions to zlib.map [Levin] +- Fix signed/unsigned comparison in gz_comp() +- Use SFLAGS when testing shared linking in configure +- Add --64 option to ./configure to use -m64 with gcc +- Fix ./configure --help to correctly name options +- Have make fail if a test fails [Levin] +- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson] +- Remove assembler object files from contrib + +Changes in 1.2.3.7 (24 Jan 2010) +- Always gzopen() with O_LARGEFILE if available +- Fix gzdirect() to work immediately after gzopen() or gzdopen() +- Make gzdirect() more precise when the state changes while reading +- Improve zlib.h documentation in many places +- Catch memory allocation failure in gz_open() +- Complete close operation if seek forward in gzclose_w() fails +- Return Z_ERRNO from gzclose_r() if close() fails +- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL +- Return zero for gzwrite() errors to match zlib.h description +- Return -1 on gzputs() error to match zlib.h description +- Add zconf.in.h to allow recovery from configure modification [Weigelt] +- Fix static library permissions in Makefile.in [Weigelt] +- Avoid warnings in configure tests that hide functionality [Weigelt] +- Add *BSD and DragonFly to Linux case in configure [gentoo 123571] +- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212] +- Avoid access of uninitialized data for first inflateReset2 call [Gomes] +- Keep object files in subdirectories to reduce the clutter somewhat +- Remove default Makefile and zlibdefs.h, add dummy Makefile +- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_ +- Remove zlibdefs.h completely -- modify zconf.h instead + +Changes in 1.2.3.6 (17 Jan 2010) +- Avoid void * arithmetic in gzread.c and gzwrite.c +- Make compilers happier with const char * for gz_error message +- Avoid unused parameter warning in inflate.c +- Avoid signed-unsigned comparison warning in inflate.c +- Indent #pragma's for traditional C +- Fix usage of strwinerror() in glib.c, change to gz_strwinerror() +- Correct email address in configure for system options +- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser] +- Update zlib.map [Brown] +- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok] +- Apply various fixes to CMakeLists.txt [Lowman] +- Add checks on len in gzread() and gzwrite() +- Add error message for no more room for gzungetc() +- Remove zlib version check in gzwrite() +- Defer compression of gzprintf() result until need to +- Use snprintf() in gzdopen() if available +- Remove USE_MMAP configuration determination (only used by minigzip) +- Remove examples/pigz.c (available separately) +- Update examples/gun.c to 1.6 + +Changes in 1.2.3.5 (8 Jan 2010) +- Add space after #if in zutil.h for some compilers +- Fix relatively harmless bug in deflate_fast() [Exarevsky] +- Fix same problem in deflate_slow() +- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown] +- Add deflate_rle() for faster Z_RLE strategy run-length encoding +- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding +- Change name of "write" variable in inffast.c to avoid library collisions +- Fix premature EOF from gzread() in gzio.c [Brown] +- Use zlib header window size if windowBits is 0 in inflateInit2() +- Remove compressBound() call in deflate.c to avoid linking compress.o +- Replace use of errno in gz* with functions, support WinCE [Alves] +- Provide alternative to perror() in minigzip.c for WinCE [Alves] +- Don't use _vsnprintf on later versions of MSVC [Lowman] +- Add CMake build script and input file [Lowman] +- Update contrib/minizip to 1.1 [Svensson, Vollant] +- Moved nintendods directory from contrib to . +- Replace gzio.c with a new set of routines with the same functionality +- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above +- Update contrib/minizip to 1.1b +- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h + +Changes in 1.2.3.4 (21 Dec 2009) +- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility +- Update comments in configure and Makefile.in for default --shared +- Fix test -z's in configure [Marquess] +- Build examplesh and minigzipsh when not testing +- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h +- Import LDFLAGS from the environment in configure +- Fix configure to populate SFLAGS with discovered CFLAGS options +- Adapt make_vms.com to the new Makefile.in [Zinser] +- Add zlib2ansi script for C++ compilation [Marquess] +- Add _FILE_OFFSET_BITS=64 test to make test (when applicable) +- Add AMD64 assembler code for longest match to contrib [Teterin] +- Include options from $SFLAGS when doing $LDSHARED +- Simplify 64-bit file support by introducing z_off64_t type +- Make shared object files in objs directory to work around old Sun cc +- Use only three-part version number for Darwin shared compiles +- Add rc option to ar in Makefile.in for when ./configure not run +- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4* +- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile +- Protect against _FILE_OFFSET_BITS being defined when compiling zlib +- Rename Makefile.in targets allstatic to static and allshared to shared +- Fix static and shared Makefile.in targets to be independent +- Correct error return bug in gz_open() by setting state [Brown] +- Put spaces before ;;'s in configure for better sh compatibility +- Add pigz.c (parallel implementation of gzip) to examples/ +- Correct constant in crc32.c to UL [Leventhal] +- Reject negative lengths in crc32_combine() +- Add inflateReset2() function to work like inflateEnd()/inflateInit2() +- Include sys/types.h for _LARGEFILE64_SOURCE [Brown] +- Correct typo in doc/algorithm.txt [Janik] +- Fix bug in adler32_combine() [Zhu] +- Catch missing-end-of-block-code error in all inflates and in puff + Assures that random input to inflate eventually results in an error +- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/ +- Update ENOUGH and its usage to reflect discovered bounds +- Fix gzerror() error report on empty input file [Brown] +- Add ush casts in trees.c to avoid pedantic runtime errors +- Fix typo in zlib.h uncompress() description [Reiss] +- Correct inflate() comments with regard to automatic header detection +- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays) +- Put new version of gzlog (2.0) in examples with interruption recovery +- Add puff compile option to permit invalid distance-too-far streams +- Add puff TEST command options, ability to read piped input +- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but + _LARGEFILE64_SOURCE not defined +- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart +- Fix deflateSetDictionary() to use all 32K for output consistency +- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h) +- Clear bytes after deflate lookahead to avoid use of uninitialized data +- Change a limit in inftrees.c to be more transparent to Coverity Prevent +- Update win32/zlib.def with exported symbols from zlib.h +- Correct spelling errors in zlib.h [Willem, Sobrado] +- Allow Z_BLOCK for deflate() to force a new block +- Allow negative bits in inflatePrime() to delete existing bit buffer +- Add Z_TREES flush option to inflate() to return at end of trees +- Add inflateMark() to return current state information for random access +- Add Makefile for NintendoDS to contrib [Costa] +- Add -w in configure compile tests to avoid spurious warnings [Beucler] +- Fix typos in zlib.h comments for deflateSetDictionary() +- Fix EOF detection in transparent gzread() [Maier] + +Changes in 1.2.3.3 (2 October 2006) +- Make --shared the default for configure, add a --static option +- Add compile option to permit invalid distance-too-far streams +- Add inflateUndermine() function which is required to enable above +- Remove use of "this" variable name for C++ compatibility [Marquess] +- Add testing of shared library in make test, if shared library built +- Use ftello() and fseeko() if available instead of ftell() and fseek() +- Provide two versions of all functions that use the z_off_t type for + binary compatibility -- a normal version and a 64-bit offset version, + per the Large File Support Extension when _LARGEFILE64_SOURCE is + defined; use the 64-bit versions by default when _FILE_OFFSET_BITS + is defined to be 64 +- Add a --uname= option to configure to perhaps help with cross-compiling + +Changes in 1.2.3.2 (3 September 2006) +- Turn off silly Borland warnings [Hay] +- Use off64_t and define _LARGEFILE64_SOURCE when present +- Fix missing dependency on inffixed.h in Makefile.in +- Rig configure --shared to build both shared and static [Teredesai, Truta] +- Remove zconf.in.h and instead create a new zlibdefs.h file +- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant] +- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt] + +Changes in 1.2.3.1 (16 August 2006) +- Add watcom directory with OpenWatcom make files [Daniel] +- Remove #undef of FAR in zconf.in.h for MVS [Fedtke] +- Update make_vms.com [Zinser] +- Use -fPIC for shared build in configure [Teredesai, Nicholson] +- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen] +- Use fdopen() (not _fdopen()) for Interix in zutil.h [Bäck] +- Add some FAQ entries about the contrib directory +- Update the MVS question in the FAQ +- Avoid extraneous reads after EOF in gzio.c [Brown] +- Correct spelling of "successfully" in gzio.c [Randers-Pehrson] +- Add comments to zlib.h about gzerror() usage [Brown] +- Set extra flags in gzip header in gzopen() like deflate() does +- Make configure options more compatible with double-dash conventions + [Weigelt] +- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen] +- Fix uninstall target in Makefile.in [Truta] +- Add pkgconfig support [Weigelt] +- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt] +- Replace set_data_type() with a more accurate detect_data_type() in + trees.c, according to the txtvsbin.txt document [Truta] +- Swap the order of #include and #include "zlib.h" in + gzio.c, example.c and minigzip.c [Truta] +- Shut up annoying VS2005 warnings about standard C deprecation [Rowe, + Truta] (where?) +- Fix target "clean" from win32/Makefile.bor [Truta] +- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe] +- Update zlib www home address in win32/DLL_FAQ.txt [Truta] +- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove] +- Enable browse info in the "Debug" and "ASM Debug" configurations in + the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta] +- Add pkgconfig support [Weigelt] +- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h, + for use in win32/zlib1.rc [Polushin, Rowe, Truta] +- Add a document that explains the new text detection scheme to + doc/txtvsbin.txt [Truta] +- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta] +- Move algorithm.txt into doc/ [Truta] +- Synchronize FAQ with website +- Fix compressBound(), was low for some pathological cases [Fearnley] +- Take into account wrapper variations in deflateBound() +- Set examples/zpipe.c input and output to binary mode for Windows +- Update examples/zlib_how.html with new zpipe.c (also web site) +- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems + that gcc became pickier in 4.0) +- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain + un-versioned, the patch adds versioning only for symbols introduced in + zlib-1.2.0 or later. It also declares as local those symbols which are + not designed to be exported." [Levin] +- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure +- Do not initialize global static by default in trees.c, add a response + NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess] +- Don't use strerror() in gzio.c under WinCE [Yakimov] +- Don't use errno.h in zutil.h under WinCE [Yakimov] +- Move arguments for AR to its usage to allow replacing ar [Marot] +- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson] +- Improve inflateInit() and inflateInit2() documentation +- Fix structure size comment in inflate.h +- Change configure help option from --h* to --help [Santos] + +Changes in 1.2.3 (18 July 2005) +- Apply security vulnerability fixes to contrib/infback9 as well +- Clean up some text files (carriage returns, trailing space) +- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant] + +Changes in 1.2.2.4 (11 July 2005) +- Add inflatePrime() function for starting inflation at bit boundary +- Avoid some Visual C warnings in deflate.c +- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit + compile +- Fix some spelling errors in comments [Betts] +- Correct inflateInit2() error return documentation in zlib.h +- Add zran.c example of compressed data random access to examples + directory, shows use of inflatePrime() +- Fix cast for assignments to strm->state in inflate.c and infback.c +- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer] +- Move declarations of gf2 functions to right place in crc32.c [Oberhumer] +- Add cast in trees.c t avoid a warning [Oberhumer] +- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer] +- Update make_vms.com [Zinser] +- Initialize state->write in inflateReset() since copied in inflate_fast() +- Be more strict on incomplete code sets in inflate_table() and increase + ENOUGH and MAXD -- this repairs a possible security vulnerability for + invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for + discovering the vulnerability and providing test cases. +- Add ia64 support to configure for HP-UX [Smith] +- Add error return to gzread() for format or i/o error [Levin] +- Use malloc.h for OS/2 [Necasek] + +Changes in 1.2.2.3 (27 May 2005) +- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile +- Typecast fread() return values in gzio.c [Vollant] +- Remove trailing space in minigzip.c outmode (VC++ can't deal with it) +- Fix crc check bug in gzread() after gzungetc() [Heiner] +- Add the deflateTune() function to adjust internal compression parameters +- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack) +- Remove an incorrect assertion in examples/zpipe.c +- Add C++ wrapper in infback9.h [Donais] +- Fix bug in inflateCopy() when decoding fixed codes +- Note in zlib.h how much deflateSetDictionary() actually uses +- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used) +- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer] +- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer] +- Add gzdirect() function to indicate transparent reads +- Update contrib/minizip [Vollant] +- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer] +- Add casts in crc32.c to avoid warnings [Oberhumer] +- Add contrib/masmx64 [Vollant] +- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant] + +Changes in 1.2.2.2 (30 December 2004) +- Replace structure assignments in deflate.c and inflate.c with zmemcpy to + avoid implicit memcpy calls (portability for no-library compilation) +- Increase sprintf() buffer size in gzdopen() to allow for large numbers +- Add INFLATE_STRICT to check distances against zlib header +- Improve WinCE errno handling and comments [Chang] +- Remove comment about no gzip header processing in FAQ +- Add Z_FIXED strategy option to deflateInit2() to force fixed trees +- Add updated make_vms.com [Coghlan], update README +- Create a new "examples" directory, move gzappend.c there, add zpipe.c, + fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html. +- Add FAQ entry and comments in deflate.c on uninitialized memory access +- Add Solaris 9 make options in configure [Gilbert] +- Allow strerror() usage in gzio.c for STDC +- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer] +- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant] +- Use z_off_t for adler32_combine() and crc32_combine() lengths +- Make adler32() much faster for small len +- Use OS_CODE in deflate() default gzip header + +Changes in 1.2.2.1 (31 October 2004) +- Allow inflateSetDictionary() call for raw inflate +- Fix inflate header crc check bug for file names and comments +- Add deflateSetHeader() and gz_header structure for custom gzip headers +- Add inflateGetheader() to retrieve gzip headers +- Add crc32_combine() and adler32_combine() functions +- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list +- Use zstreamp consistently in zlib.h (inflate_back functions) +- Remove GUNZIP condition from definition of inflate_mode in inflate.h + and in contrib/inflate86/inffast.S [Truta, Anderson] +- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson] +- Update projects/README.projects and projects/visualc6 [Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta] +- Deprecate Z_ASCII; use Z_TEXT instead [Truta] +- Use a new algorithm for setting strm->data_type in trees.c [Truta] +- Do not define an exit() prototype in zutil.c unless DEBUG defined +- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta] +- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate() +- Fix Darwin build version identification [Peterson] + +Changes in 1.2.2 (3 October 2004) +- Update zlib.h comments on gzip in-memory processing +- Set adler to 1 in inflateReset() to support Java test suite [Walles] +- Add contrib/dotzlib [Ravn] +- Update win32/DLL_FAQ.txt [Truta] +- Update contrib/minizip [Vollant] +- Move contrib/visual-basic.txt to old/ [Truta] +- Fix assembler builds in projects/visualc6/ [Truta] + +Changes in 1.2.1.2 (9 September 2004) +- Update INDEX file +- Fix trees.c to update strm->data_type (no one ever noticed!) +- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown] +- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE) +- Add limited multitasking protection to DYNAMIC_CRC_TABLE +- Add NO_vsnprintf for VMS in zutil.h [Mozilla] +- Don't declare strerror() under VMS [Mozilla] +- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize +- Update contrib/ada [Anisimkov] +- Update contrib/minizip [Vollant] +- Fix configure to not hardcode directories for Darwin [Peterson] +- Fix gzio.c to not return error on empty files [Brown] +- Fix indentation; update version in contrib/delphi/ZLib.pas and + contrib/pascal/zlibpas.pas [Truta] +- Update mkasm.bat in contrib/masmx86 [Truta] +- Update contrib/untgz [Truta] +- Add projects/README.projects [Truta] +- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta] +- Update win32/DLL_FAQ.txt [Truta] +- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta] +- Remove an unnecessary assignment to curr in inftrees.c [Truta] +- Add OS/2 to exe builds in configure [Poltorak] +- Remove err dummy parameter in zlib.h [Kientzle] + +Changes in 1.2.1.1 (9 January 2004) +- Update email address in README +- Several FAQ updates +- Fix a big fat bug in inftrees.c that prevented decoding valid + dynamic blocks with only literals and no distance codes -- + Thanks to "Hot Emu" for the bug report and sample file +- Add a note to puff.c on no distance codes case. + +Changes in 1.2.1 (17 November 2003) +- Remove a tab in contrib/gzappend/gzappend.c +- Update some interfaces in contrib for new zlib functions +- Update zlib version number in some contrib entries +- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta] +- Support shared libraries on Hurd and KFreeBSD [Brown] +- Fix error in NO_DIVIDE option of adler32.c + +Changes in 1.2.0.8 (4 November 2003) +- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas +- Add experimental NO_DIVIDE #define in adler32.c + - Possibly faster on some processors (let me know if it is) +- Correct Z_BLOCK to not return on first inflate call if no wrap +- Fix strm->data_type on inflate() return to correctly indicate EOB +- Add deflatePrime() function for appending in the middle of a byte +- Add contrib/gzappend for an example of appending to a stream +- Update win32/DLL_FAQ.txt [Truta] +- Delete Turbo C comment in README [Truta] +- Improve some indentation in zconf.h [Truta] +- Fix infinite loop on bad input in configure script [Church] +- Fix gzeof() for concatenated gzip files [Johnson] +- Add example to contrib/visual-basic.txt [Michael B.] +- Add -p to mkdir's in Makefile.in [vda] +- Fix configure to properly detect presence or lack of printf functions +- Add AS400 support [Monnerat] +- Add a little Cygwin support [Wilson] + +Changes in 1.2.0.7 (21 September 2003) +- Correct some debug formats in contrib/infback9 +- Cast a type in a debug statement in trees.c +- Change search and replace delimiter in configure from % to # [Beebe] +- Update contrib/untgz to 0.2 with various fixes [Truta] +- Add build support for Amiga [Nikl] +- Remove some directories in old that have been updated to 1.2 +- Add dylib building for Mac OS X in configure and Makefile.in +- Remove old distribution stuff from Makefile +- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X +- Update links in README + +Changes in 1.2.0.6 (13 September 2003) +- Minor FAQ updates +- Update contrib/minizip to 1.00 [Vollant] +- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta] +- Update POSTINC comment for 68060 [Nikl] +- Add contrib/infback9 with deflate64 decoding (unsupported) +- For MVS define NO_vsnprintf and undefine FAR [van Burik] +- Add pragma for fdopen on MVS [van Burik] + +Changes in 1.2.0.5 (8 September 2003) +- Add OF to inflateBackEnd() declaration in zlib.h +- Remember start when using gzdopen in the middle of a file +- Use internal off_t counters in gz* functions to properly handle seeks +- Perform more rigorous check for distance-too-far in inffast.c +- Add Z_BLOCK flush option to return from inflate at block boundary +- Set strm->data_type on return from inflate + - Indicate bits unused, if at block boundary, and if in last block +- Replace size_t with ptrdiff_t in crc32.c, and check for correct size +- Add condition so old NO_DEFLATE define still works for compatibility +- FAQ update regarding the Windows DLL [Truta] +- INDEX update: add qnx entry, remove aix entry [Truta] +- Install zlib.3 into mandir [Wilson] +- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta] +- Adapt the zlib interface to the new DLL convention guidelines [Truta] +- Introduce ZLIB_WINAPI macro to allow the export of functions using + the WINAPI calling convention, for Visual Basic [Vollant, Truta] +- Update msdos and win32 scripts and makefiles [Truta] +- Export symbols by name, not by ordinal, in win32/zlib.def [Truta] +- Add contrib/ada [Anisimkov] +- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta] +- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant] +- Add contrib/masm686 [Truta] +- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm + [Truta, Vollant] +- Update contrib/delphi; rename to contrib/pascal; add example [Truta] +- Remove contrib/delphi2; add a new contrib/delphi [Truta] +- Avoid inclusion of the nonstandard in contrib/iostream, + and fix some method prototypes [Truta] +- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip + [Truta] +- Avoid the use of backslash (\) in contrib/minizip [Vollant] +- Fix file time handling in contrib/untgz; update makefiles [Truta] +- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines + [Vollant] +- Remove contrib/vstudio/vc15_16 [Vollant] +- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta] +- Update README.contrib [Truta] +- Invert the assignment order of match_head and s->prev[...] in + INSERT_STRING [Truta] +- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings + [Truta] +- Compare function pointers with 0, not with NULL or Z_NULL [Truta] +- Fix prototype of syncsearch in inflate.c [Truta] +- Introduce ASMINF macro to be enabled when using an ASM implementation + of inflate_fast [Truta] +- Change NO_DEFLATE to NO_GZCOMPRESS [Truta] +- Modify test_gzio in example.c to take a single file name as a + parameter [Truta] +- Exit the example.c program if gzopen fails [Truta] +- Add type casts around strlen in example.c [Truta] +- Remove casting to sizeof in minigzip.c; give a proper type + to the variable compared with SUFFIX_LEN [Truta] +- Update definitions of STDC and STDC99 in zconf.h [Truta] +- Synchronize zconf.h with the new Windows DLL interface [Truta] +- Use SYS16BIT instead of __32BIT__ to distinguish between + 16- and 32-bit platforms [Truta] +- Use far memory allocators in small 16-bit memory models for + Turbo C [Truta] +- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in + zlibCompileFlags [Truta] +- Cygwin has vsnprintf [Wilson] +- In Windows16, OS_CODE is 0, as in MSDOS [Truta] +- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson] + +Changes in 1.2.0.4 (10 August 2003) +- Minor FAQ updates +- Be more strict when checking inflateInit2's windowBits parameter +- Change NO_GUNZIP compile option to NO_GZIP to cover deflate as well +- Add gzip wrapper option to deflateInit2 using windowBits +- Add updated QNX rule in configure and qnx directory [Bonnefoy] +- Make inflate distance-too-far checks more rigorous +- Clean up FAR usage in inflate +- Add casting to sizeof() in gzio.c and minigzip.c + +Changes in 1.2.0.3 (19 July 2003) +- Fix silly error in gzungetc() implementation [Vollant] +- Update contrib/minizip and contrib/vstudio [Vollant] +- Fix printf format in example.c +- Correct cdecl support in zconf.in.h [Anisimkov] +- Minor FAQ updates + +Changes in 1.2.0.2 (13 July 2003) +- Add ZLIB_VERNUM in zlib.h for numerical preprocessor comparisons +- Attempt to avoid warnings in crc32.c for pointer-int conversion +- Add AIX to configure, remove aix directory [Bakker] +- Add some casts to minigzip.c +- Improve checking after insecure sprintf() or vsprintf() calls +- Remove #elif's from crc32.c +- Change leave label to inf_leave in inflate.c and infback.c to avoid + library conflicts +- Remove inflate gzip decoding by default--only enable gzip decoding by + special request for stricter backward compatibility +- Add zlibCompileFlags() function to return compilation information +- More typecasting in deflate.c to avoid warnings +- Remove leading underscore from _Capital #defines [Truta] +- Fix configure to link shared library when testing +- Add some Windows CE target adjustments [Mai] +- Remove #define ZLIB_DLL in zconf.h [Vollant] +- Add zlib.3 [Rodgers] +- Update RFC URL in deflate.c and algorithm.txt [Mai] +- Add zlib_dll_FAQ.txt to contrib [Truta] +- Add UL to some constants [Truta] +- Update minizip and vstudio [Vollant] +- Remove vestigial NEED_DUMMY_RETURN from zconf.in.h +- Expand use of NO_DUMMY_DECL to avoid all dummy structures +- Added iostream3 to contrib [Schwardt] +- Replace rewind() with fseek() for WinCE [Truta] +- Improve setting of zlib format compression level flags + - Report 0 for huffman and rle strategies and for level == 0 or 1 + - Report 2 only for level == 6 +- Only deal with 64K limit when necessary at compile time [Truta] +- Allow TOO_FAR check to be turned off at compile time [Truta] +- Add gzclearerr() function [Souza] +- Add gzungetc() function + +Changes in 1.2.0.1 (17 March 2003) +- Add Z_RLE strategy for run-length encoding [Truta] + - When Z_RLE requested, restrict matches to distance one + - Update zlib.h, minigzip.c, gzopen(), gzdopen() for Z_RLE +- Correct FASTEST compilation to allow level == 0 +- Clean up what gets compiled for FASTEST +- Incorporate changes to zconf.in.h [Vollant] + - Refine detection of Turbo C need for dummy returns + - Refine ZLIB_DLL compilation + - Include additional header file on VMS for off_t typedef +- Try to use _vsnprintf where it supplants vsprintf [Vollant] +- Add some casts in inffast.c +- Enchance comments in zlib.h on what happens if gzprintf() tries to + write more than 4095 bytes before compression +- Remove unused state from inflateBackEnd() +- Remove exit(0) from minigzip.c, example.c +- Get rid of all those darn tabs +- Add "check" target to Makefile.in that does the same thing as "test" +- Add "mostlyclean" and "maintainer-clean" targets to Makefile.in +- Update contrib/inflate86 [Anderson] +- Update contrib/testzlib, contrib/vstudio, contrib/minizip [Vollant] +- Add msdos and win32 directories with makefiles [Truta] +- More additions and improvements to the FAQ + +Changes in 1.2.0 (9 March 2003) +- New and improved inflate code + - About 20% faster + - Does not allocate 32K window unless and until needed + - Automatically detects and decompresses gzip streams + - Raw inflate no longer needs an extra dummy byte at end + - Added inflateBack functions using a callback interface--even faster + than inflate, useful for file utilities (gzip, zip) + - Added inflateCopy() function to record state for random access on + externally generated deflate streams (e.g. in gzip files) + - More readable code (I hope) +- New and improved crc32() + - About 50% faster, thanks to suggestions from Rodney Brown +- Add deflateBound() and compressBound() functions +- Fix memory leak in deflateInit2() +- Permit setting dictionary for raw deflate (for parallel deflate) +- Fix const declaration for gzwrite() +- Check for some malloc() failures in gzio.c +- Fix bug in gzopen() on single-byte file 0x1f +- Fix bug in gzread() on concatenated file with 0x1f at end of buffer + and next buffer doesn't start with 0x8b +- Fix uncompress() to return Z_DATA_ERROR on truncated input +- Free memory at end of example.c +- Remove MAX #define in trees.c (conflicted with some libraries) +- Fix static const's in deflate.c, gzio.c, and zutil.[ch] +- Declare malloc() and free() in gzio.c if STDC not defined +- Use malloc() instead of calloc() in zutil.c if int big enough +- Define STDC for AIX +- Add aix/ with approach for compiling shared library on AIX +- Add HP-UX support for shared libraries in configure +- Add OpenUNIX support for shared libraries in configure +- Use $cc instead of gcc to build shared library +- Make prefix directory if needed when installing +- Correct Macintosh avoidance of typedef Byte in zconf.h +- Correct Turbo C memory allocation when under Linux +- Use libz.a instead of -lz in Makefile (assure use of compiled library) +- Update configure to check for snprintf or vsnprintf functions and their + return value, warn during make if using an insecure function +- Fix configure problem with compile-time knowledge of HAVE_UNISTD_H that + is lost when library is used--resolution is to build new zconf.h +- Documentation improvements (in zlib.h): + - Document raw deflate and inflate + - Update RFCs URL + - Point out that zlib and gzip formats are different + - Note that Z_BUF_ERROR is not fatal + - Document string limit for gzprintf() and possible buffer overflow + - Note requirement on avail_out when flushing + - Note permitted values of flush parameter of inflate() +- Add some FAQs (and even answers) to the FAQ +- Add contrib/inflate86/ for x86 faster inflate +- Add contrib/blast/ for PKWare Data Compression Library decompression +- Add contrib/puff/ simple inflate for deflate format description + +Changes in 1.1.4 (11 March 2002) +- ZFREE was repeated on same allocation on some error conditions. + This creates a security problem described in + http://www.zlib.org/advisory-2002-03-11.txt +- Returned incorrect error (Z_MEM_ERROR) on some invalid data +- Avoid accesses before window for invalid distances with inflate window + less than 32K. +- force windowBits > 8 to avoid a bug in the encoder for a window size + of 256 bytes. (A complete fix will be available in 1.1.5). + +Changes in 1.1.3 (9 July 1998) +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +- Support gzdopen on Mac with Metrowerks (Jason Linhart) +- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) +- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) +- avoid some warnings with Borland C (Tom Tanner) +- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) +- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) +- allow several arguments to configure (Tim Mooney, Frodo Looijaard) +- use libdir and includedir in Makefile.in (Tim Mooney) +- support shared libraries on OSF1 V4 (Tim Mooney) +- remove so_locations in "make clean" (Tim Mooney) +- fix maketree.c compilation error (Glenn, Mark) +- Python interface to zlib now in Python 1.5 (Jeremy Hylton) +- new Makefile.riscos (Rich Walker) +- initialize static descriptors in trees.c for embedded targets (Nick Smith) +- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) +- add the OS/2 files in Makefile.in too (Andrew Zabolotny) +- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) +- fix maketree.c to allow clean compilation of inffixed.h (Mark) +- fix parameter check in deflateCopy (Gunther Nikl) +- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) +- Many portability patches by Christian Spieler: + . zutil.c, zutil.h: added "const" for zmem* + . Make_vms.com: fixed some typos + . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists + . msdos/Makefile.msc: remove "default rtl link library" info from obj files + . msdos/Makefile.*: use model-dependent name for the built zlib library + . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: + new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) +- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) +- replace __far with _far for better portability (Christian Spieler, Tom Lane) +- fix test for errno.h in configure (Tim Newsham) + +Changes in 1.1.2 (19 March 98) +- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) + See http://www.winimage.com/zLibDll/unzip.html +- preinitialize the inflate tables for fixed codes, to make the code + completely thread safe (Mark) +- some simplifications and slight speed-up to the inflate code (Mark) +- fix gzeof on non-compressed files (Allan Schrum) +- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) +- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) +- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) +- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) +- do not wrap extern "C" around system includes (Tom Lane) +- mention zlib binding for TCL in README (Andreas Kupries) +- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) +- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) +- allow "configure --prefix $HOME" (Tim Mooney) +- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) +- move Makefile.sas to amiga/Makefile.sas + +Changes in 1.1.1 (27 Feb 98) +- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) +- remove block truncation heuristic which had very marginal effect for zlib + (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the + compression ratio on some files. This also allows inlining _tr_tally for + matches in deflate_slow. +- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) + +Changes in 1.1.0 (24 Feb 98) +- do not return STREAM_END prematurely in inflate (John Bowler) +- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) +- compile with -DFASTEST to get compression code optimized for speed only +- in minigzip, try mmap'ing the input file first (Miguel Albrecht) +- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain + on Sun but significant on HP) + +- add a pointer to experimental unzip library in README (Gilles Vollant) +- initialize variable gcc in configure (Chris Herborth) + +Changes in 1.0.9 (17 Feb 1998) +- added gzputs and gzgets functions +- do not clear eof flag in gzseek (Mark Diekhans) +- fix gzseek for files in transparent mode (Mark Diekhans) +- do not assume that vsprintf returns the number of bytes written (Jens Krinke) +- replace EXPORT with ZEXPORT to avoid conflict with other programs +- added compress2 in zconf.h, zlib.def, zlib.dnt +- new asm code from Gilles Vollant in contrib/asm386 +- simplify the inflate code (Mark): + . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() + . ZALLOC the length list in inflate_trees_fixed() instead of using stack + . ZALLOC the value area for huft_build() instead of using stack + . Simplify Z_FINISH check in inflate() + +- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 +- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) +- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with + the declaration of FAR (Gilles VOllant) +- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) +- read_buf buf parameter of type Bytef* instead of charf* +- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) +- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) +- fix check for presence of directories in "make install" (Ian Willis) + +Changes in 1.0.8 (27 Jan 1998) +- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) +- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) +- added compress2() to allow setting the compression level +- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) +- use constant arrays for the static trees in trees.c instead of computing + them at run time (thanks to Ken Raeburn for this suggestion). To create + trees.h, compile with GEN_TREES_H and run "make test". +- check return code of example in "make test" and display result +- pass minigzip command line options to file_compress +- simplifying code of inflateSync to avoid gcc 2.8 bug + +- support CC="gcc -Wall" in configure -s (QingLong) +- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) +- fix test for shared library support to avoid compiler warnings +- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) +- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) +- do not use fdopen for Metrowerks on Mac (Brad Pettit)) +- add checks for gzputc and gzputc in example.c +- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) +- use const for the CRC table (Ken Raeburn) +- fixed "make uninstall" for shared libraries +- use Tracev instead of Trace in infblock.c +- in example.c use correct compressed length for test_sync +- suppress +vnocompatwarnings in configure for HPUX (not always supported) + +Changes in 1.0.7 (20 Jan 1998) +- fix gzseek which was broken in write mode +- return error for gzseek to negative absolute position +- fix configure for Linux (Chun-Chung Chen) +- increase stack space for MSC (Tim Wegner) +- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) +- define EXPORTVA for gzprintf (Gilles Vollant) +- added man page zlib.3 (Rick Rodgers) +- for contrib/untgz, fix makedir() and improve Makefile + +- check gzseek in write mode in example.c +- allocate extra buffer for seeks only if gzseek is actually called +- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) +- add inflateSyncPoint in zconf.h +- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def + +Changes in 1.0.6 (19 Jan 1998) +- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and + gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) +- Fix a deflate bug occurring only with compression level 0 (thanks to + Andy Buckler for finding this one). +- In minigzip, pass transparently also the first byte for .Z files. +- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() +- check Z_FINISH in inflate (thanks to Marc Schluper) +- Implement deflateCopy (thanks to Adam Costello) +- make static libraries by default in configure, add --shared option. +- move MSDOS or Windows specific files to directory msdos +- suppress the notion of partial flush to simplify the interface + (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) +- suppress history buffer provided by application to simplify the interface + (this feature was not implemented anyway in 1.0.4) +- next_in and avail_in must be initialized before calling inflateInit or + inflateInit2 +- add EXPORT in all exported functions (for Windows DLL) +- added Makefile.nt (thanks to Stephen Williams) +- added the unsupported "contrib" directory: + contrib/asm386/ by Gilles Vollant + 386 asm code replacing longest_match(). + contrib/iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + contrib/iostream2/ by Tyge Løvset + Another C++ I/O streams interface + contrib/untgz/ by "Pedro A. Aranda Guti\irrez" + A very simple tar.gz file extractor using zlib + contrib/visual-basic.txt by Carlos Rios + How to use compress(), uncompress() and the gz* functions from VB. +- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression + level) in minigzip (thanks to Tom Lane) + +- use const for rommable constants in deflate +- added test for gzseek and gztell in example.c +- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) +- add undocumented function zError to convert error code to string + (for Tim Smithers) +- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. +- Use default memcpy for Symantec MSDOS compiler. +- Add EXPORT keyword for check_func (needed for Windows DLL) +- add current directory to LD_LIBRARY_PATH for "make test" +- create also a link for libz.so.1 +- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) +- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) +- added -soname for Linux in configure (Chun-Chung Chen, +- assign numbers to the exported functions in zlib.def (for Windows DLL) +- add advice in zlib.h for best usage of deflateSetDictionary +- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) +- allow compilation with ANSI keywords only enabled for TurboC in large model +- avoid "versionString"[0] (Borland bug) +- add NEED_DUMMY_RETURN for Borland +- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). +- allow compilation with CC +- defined STDC for OS/2 (David Charlap) +- limit external names to 8 chars for MVS (Thomas Lund) +- in minigzip.c, use static buffers only for 16-bit systems +- fix suffix check for "minigzip -d foo.gz" +- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) +- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) +- added makelcc.bat for lcc-win32 (Tom St Denis) +- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) +- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. +- check for unistd.h in configure (for off_t) +- remove useless check parameter in inflate_blocks_free +- avoid useless assignment of s->check to itself in inflate_blocks_new +- do not flush twice in gzclose (thanks to Ken Raeburn) +- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h +- use NO_ERRNO_H instead of enumeration of operating systems with errno.h +- work around buggy fclose on pipes for HP/UX +- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) +- fix configure if CC is already equal to gcc + +Changes in 1.0.5 (3 Jan 98) +- Fix inflate to terminate gracefully when fed corrupted or invalid data +- Use const for rommable constants in inflate +- Eliminate memory leaks on error conditions in inflate +- Removed some vestigial code in inflate +- Update web address in README + +Changes in 1.0.4 (24 Jul 96) +- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF + bit, so the decompressor could decompress all the correct data but went + on to attempt decompressing extra garbage data. This affected minigzip too. +- zlibVersion and gzerror return const char* (needed for DLL) +- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) +- use z_error only for DEBUG (avoid problem with DLLs) + +Changes in 1.0.3 (2 Jul 96) +- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS + small and medium models; this makes the library incompatible with previous + versions for these models. (No effect in large model or on other systems.) +- return OK instead of BUF_ERROR if previous deflate call returned with + avail_out as zero but there is nothing to do +- added memcmp for non STDC compilers +- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly) +- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO) +- better check for 16-bit mode MSC (avoids problem with Symantec) + +Changes in 1.0.2 (23 May 96) +- added Windows DLL support +- added a function zlibVersion (for the DLL support) +- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model) +- Bytef is define's instead of typedef'd only for Borland C +- avoid reading uninitialized memory in example.c +- mention in README that the zlib format is now RFC1950 +- updated Makefile.dj2 +- added algorithm.doc + +Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion] +- fix array overlay in deflate.c which sometimes caused bad compressed data +- fix inflate bug with empty stored block +- fix MSDOS medium model which was broken in 0.99 +- fix deflateParams() which could generate bad compressed data. +- Bytef is define'd instead of typedef'ed (work around Borland bug) +- added an INDEX file +- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32), + Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas) +- speed up adler32 for modern machines without auto-increment +- added -ansi for IRIX in configure +- static_init_done in trees.c is an int +- define unlink as delete for VMS +- fix configure for QNX +- add configure branch for SCO and HPUX +- avoid many warnings (unused variables, dead assignments, etc...) +- no fdopen for BeOS +- fix the Watcom fix for 32 bit mode (define FAR as empty) +- removed redefinition of Byte for MKWERKS +- work around an MWKERKS bug (incorrect merge of all .h files) + +Changes in 0.99 (27 Jan 96) +- allow preset dictionary shared between compressor and decompressor +- allow compression level 0 (no compression) +- add deflateParams in zlib.h: allow dynamic change of compression level + and compression strategy. +- test large buffers and deflateParams in example.c +- add optional "configure" to build zlib as a shared library +- suppress Makefile.qnx, use configure instead +- fixed deflate for 64-bit systems (detected on Cray) +- fixed inflate_blocks for 64-bit systems (detected on Alpha) +- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2) +- always return Z_BUF_ERROR when deflate() has nothing to do +- deflateInit and inflateInit are now macros to allow version checking +- prefix all global functions and types with z_ with -DZ_PREFIX +- make falloc completely reentrant (inftrees.c) +- fixed very unlikely race condition in ct_static_init +- free in reverse order of allocation to help memory manager +- use zlib-1.0/* instead of zlib/* inside the tar.gz +- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith + -Wconversion -Wstrict-prototypes -Wmissing-prototypes" +- allow gzread on concatenated .gz files +- deflateEnd now returns Z_DATA_ERROR if it was premature +- deflate is finally (?) fully deterministic (no matches beyond end of input) +- Document Z_SYNC_FLUSH +- add uninstall in Makefile +- Check for __cpluplus in zlib.h +- Better test in ct_align for partial flush +- avoid harmless warnings for Borland C++ +- initialize hash_head in deflate.c +- avoid warning on fdopen (gzio.c) for HP cc -Aa +- include stdlib.h for STDC compilers +- include errno.h for Cray +- ignore error if ranlib doesn't exist +- call ranlib twice for NeXTSTEP +- use exec_prefix instead of prefix for libz.a +- renamed ct_* as _tr_* to avoid conflict with applications +- clear z->msg in inflateInit2 before any error return +- initialize opaque in example.c, gzio.c, deflate.c and inflate.c +- fixed typo in zconf.h (_GNUC__ => __GNUC__) +- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode) +- fix typo in Make_vms.com (f$trnlnm -> f$getsyi) +- in fcalloc, normalize pointer if size > 65520 bytes +- don't use special fcalloc for 32 bit Borland C++ +- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc... +- use Z_BINARY instead of BINARY +- document that gzclose after gzdopen will close the file +- allow "a" as mode in gzopen. +- fix error checking in gzread +- allow skipping .gz extra-field on pipes +- added reference to Perl interface in README +- put the crc table in FAR data (I dislike more and more the medium model :) +- added get_crc_table +- added a dimension to all arrays (Borland C can't count). +- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast +- guard against multiple inclusion of *.h (for precompiled header on Mac) +- Watcom C pretends to be Microsoft C small model even in 32 bit mode. +- don't use unsized arrays to avoid silly warnings by Visual C++: + warning C4746: 'inflate_mask' : unsized array treated as '__far' + (what's wrong with far data in far model?). +- define enum out of inflate_blocks_state to allow compilation with C++ + +Changes in 0.95 (16 Aug 95) +- fix MSDOS small and medium model (now easier to adapt to any compiler) +- inlined send_bits +- fix the final (:-) bug for deflate with flush (output was correct but + not completely flushed in rare occasions). +- default window size is same for compression and decompression + (it's now sufficient to set MAX_WBITS in zconf.h). +- voidp -> voidpf and voidnp -> voidp (for consistency with other + typedefs and because voidnp was not near in large model). + +Changes in 0.94 (13 Aug 95) +- support MSDOS medium model +- fix deflate with flush (could sometimes generate bad output) +- fix deflateReset (zlib header was incorrectly suppressed) +- added support for VMS +- allow a compression level in gzopen() +- gzflush now calls fflush +- For deflate with flush, flush even if no more input is provided. +- rename libgz.a as libz.a +- avoid complex expression in infcodes.c triggering Turbo C bug +- work around a problem with gcc on Alpha (in INSERT_STRING) +- don't use inline functions (problem with some gcc versions) +- allow renaming of Byte, uInt, etc... with #define. +- avoid warning about (unused) pointer before start of array in deflate.c +- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c +- avoid reserved word 'new' in trees.c + +Changes in 0.93 (25 June 95) +- temporarily disable inline functions +- make deflate deterministic +- give enough lookahead for PARTIAL_FLUSH +- Set binary mode for stdin/stdout in minigzip.c for OS/2 +- don't even use signed char in inflate (not portable enough) +- fix inflate memory leak for segmented architectures + +Changes in 0.92 (3 May 95) +- don't assume that char is signed (problem on SGI) +- Clear bit buffer when starting a stored block +- no memcpy on Pyramid +- suppressed inftest.c +- optimized fill_window, put longest_match inline for gcc +- optimized inflate on stored blocks. +- untabify all sources to simplify patches + +Changes in 0.91 (2 May 95) +- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h +- Document the memory requirements in zconf.h +- added "make install" +- fix sync search logic in inflateSync +- deflate(Z_FULL_FLUSH) now works even if output buffer too short +- after inflateSync, don't scare people with just "lo world" +- added support for DJGPP + +Changes in 0.9 (1 May 95) +- don't assume that zalloc clears the allocated memory (the TurboC bug + was Mark's bug after all :) +- let again gzread copy uncompressed data unchanged (was working in 0.71) +- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented +- added a test of inflateSync in example.c +- moved MAX_WBITS to zconf.h because users might want to change that. +- document explicitly that zalloc(64K) on MSDOS must return a normalized + pointer (zero offset) +- added Makefiles for Microsoft C, Turbo C, Borland C++ +- faster crc32() + +Changes in 0.8 (29 April 95) +- added fast inflate (inffast.c) +- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this + is incompatible with previous versions of zlib which returned Z_OK. +- work around a TurboC compiler bug (bad code for b << 0, see infutil.h) + (actually that was not a compiler bug, see 0.81 above) +- gzread no longer reads one extra byte in certain cases +- In gzio destroy(), don't reference a freed structure +- avoid many warnings for MSDOS +- avoid the ERROR symbol which is used by MS Windows + +Changes in 0.71 (14 April 95) +- Fixed more MSDOS compilation problems :( There is still a bug with + TurboC large model. + +Changes in 0.7 (14 April 95) +- Added full inflate support. +- Simplified the crc32() interface. The pre- and post-conditioning + (one's complement) is now done inside crc32(). WARNING: this is + incompatible with previous versions; see zlib.h for the new usage. + +Changes in 0.61 (12 April 95) +- workaround for a bug in TurboC. example and minigzip now work on MSDOS. + +Changes in 0.6 (11 April 95) +- added minigzip.c +- added gzdopen to reopen a file descriptor as gzFile +- added transparent reading of non-gziped files in gzread. +- fixed bug in gzread (don't read crc as data) +- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose). +- don't allocate big arrays in the stack (for MSDOS) +- fix some MSDOS compilation problems + +Changes in 0.5: +- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but + not yet Z_FULL_FLUSH. +- support decompression but only in a single step (forced Z_FINISH) +- added opaque object for zalloc and zfree. +- added deflateReset and inflateReset +- added a variable zlib_version for consistency checking. +- renamed the 'filter' parameter of deflateInit2 as 'strategy'. + Added Z_FILTERED and Z_HUFFMAN_ONLY constants. + +Changes in 0.4: +- avoid "zip" everywhere, use zlib instead of ziplib. +- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush + if compression method == 8. +- added adler32 and crc32 +- renamed deflateOptions as deflateInit2, call one or the other but not both +- added the method parameter for deflateInit2. +- added inflateInit2 +- simplied considerably deflateInit and inflateInit by not supporting + user-provided history buffer. This is supported only in deflateInit2 + and inflateInit2. + +Changes in 0.3: +- prefix all macro names with Z_ +- use Z_FINISH instead of deflateEnd to finish compression. +- added Z_HUFFMAN_ONLY +- added gzerror() diff --git a/deps/zlib-1.2.11/FAQ b/deps/zlib-1.2.11/FAQ new file mode 100755 index 0000000..99b7cf9 --- /dev/null +++ b/deps/zlib-1.2.11/FAQ @@ -0,0 +1,368 @@ + + Frequently Asked Questions about zlib + + +If your question is not there, please check the zlib home page +http://zlib.net/ which may have more recent information. +The lastest zlib FAQ is at http://zlib.net/zlib_faq.html + + + 1. Is zlib Y2K-compliant? + + Yes. zlib doesn't handle dates. + + 2. Where can I get a Windows DLL version? + + The zlib sources can be compiled without change to produce a DLL. See the + file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the + precompiled DLL are found in the zlib web site at http://zlib.net/ . + + 3. Where can I get a Visual Basic interface to zlib? + + See + * http://marknelson.us/1997/01/01/zlib-engine/ + * win32/DLL_FAQ.txt in the zlib distribution + + 4. compress() returns Z_BUF_ERROR. + + Make sure that before the call of compress(), the length of the compressed + buffer is equal to the available size of the compressed buffer and not + zero. For Visual Basic, check that this parameter is passed by reference + ("as any"), not by value ("as long"). + + 5. deflate() or inflate() returns Z_BUF_ERROR. + + Before making the call, make sure that avail_in and avail_out are not zero. + When setting the parameter flush equal to Z_FINISH, also make sure that + avail_out is big enough to allow processing all pending input. Note that a + Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be + made with more input or output space. A Z_BUF_ERROR may in fact be + unavoidable depending on how the functions are used, since it is not + possible to tell whether or not there is more output pending when + strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a + heavily annotated example. + + 6. Where's the zlib documentation (man pages, etc.)? + + It's in zlib.h . Examples of zlib usage are in the files test/example.c + and test/minigzip.c, with more in examples/ . + + 7. Why don't you use GNU autoconf or libtool or ...? + + Because we would like to keep zlib as a very small and simple package. + zlib is rather portable and doesn't need much configuration. + + 8. I found a bug in zlib. + + Most of the time, such problems are due to an incorrect usage of zlib. + Please try to reproduce the problem with a small program and send the + corresponding source to us at zlib@gzip.org . Do not send multi-megabyte + data files without prior agreement. + + 9. Why do I get "undefined reference to gzputc"? + + If "make test" produces something like + + example.o(.text+0x154): undefined reference to `gzputc' + + check that you don't have old files libz.* in /usr/lib, /usr/local/lib or + /usr/X11R6/lib. Remove any old versions, then do "make install". + +10. I need a Delphi interface to zlib. + + See the contrib/delphi directory in the zlib distribution. + +11. Can zlib handle .zip archives? + + Not by itself, no. See the directory contrib/minizip in the zlib + distribution. + +12. Can zlib handle .Z files? + + No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt + the code of uncompress on your own. + +13. How can I make a Unix shared library? + + By default a shared (and a static) library is built for Unix. So: + + make distclean + ./configure + make + +14. How do I install a shared zlib library on Unix? + + After the above, then: + + make install + + However, many flavors of Unix come with a shared zlib already installed. + Before going to the trouble of compiling a shared version of zlib and + trying to install it, you may want to check if it's already there! If you + can #include , it's there. The -lz option will probably link to + it. You can check the version at the top of zlib.h or with the + ZLIB_VERSION symbol defined in zlib.h . + +15. I have a question about OttoPDF. + + We are not the authors of OttoPDF. The real author is on the OttoPDF web + site: Joel Hainley, jhainley@myndkryme.com. + +16. Can zlib decode Flate data in an Adobe PDF file? + + Yes. See http://www.pdflib.com/ . To modify PDF forms, see + http://sourceforge.net/projects/acroformtool/ . + +17. Why am I getting this "register_frame_info not found" error on Solaris? + + After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib + generates an error such as: + + ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so: + symbol __register_frame_info: referenced symbol not found + + The symbol __register_frame_info is not part of zlib, it is generated by + the C compiler (cc or gcc). You must recompile applications using zlib + which have this problem. This problem is specific to Solaris. See + http://www.sunfreeware.com for Solaris versions of zlib and applications + using zlib. + +18. Why does gzip give an error on a file I make with compress/deflate? + + The compress and deflate functions produce data in the zlib format, which + is different and incompatible with the gzip format. The gz* functions in + zlib on the other hand use the gzip format. Both the zlib and gzip formats + use the same compressed data format internally, but have different headers + and trailers around the compressed data. + +19. Ok, so why are there two different formats? + + The gzip format was designed to retain the directory information about a + single file, such as the name and last modification date. The zlib format + on the other hand was designed for in-memory and communication channel + applications, and has a much more compact header and trailer and uses a + faster integrity check than gzip. + +20. Well that's nice, but how do I make a gzip file in memory? + + You can request that deflate write the gzip format instead of the zlib + format using deflateInit2(). You can also request that inflate decode the + gzip format using inflateInit2(). Read zlib.h for more details. + +21. Is zlib thread-safe? + + Yes. However any library routines that zlib uses and any application- + provided memory allocation routines must also be thread-safe. zlib's gz* + functions use stdio library routines, and most of zlib's functions use the + library memory allocation routines by default. zlib's *Init* functions + allow for the application to provide custom memory allocation routines. + + Of course, you should only operate on any given zlib or gzip stream from a + single thread at a time. + +22. Can I use zlib in my commercial application? + + Yes. Please read the license in zlib.h. + +23. Is zlib under the GNU license? + + No. Please read the license in zlib.h. + +24. The license says that altered source versions must be "plainly marked". So + what exactly do I need to do to meet that requirement? + + You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In + particular, the final version number needs to be changed to "f", and an + identification string should be appended to ZLIB_VERSION. Version numbers + x.x.x.f are reserved for modifications to zlib by others than the zlib + maintainers. For example, if the version of the base zlib you are altering + is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and + ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also + update the version strings in deflate.c and inftrees.c. + + For altered source distributions, you should also note the origin and + nature of the changes in zlib.h, as well as in ChangeLog and README, along + with the dates of the alterations. The origin should include at least your + name (or your company's name), and an email address to contact for help or + issues with the library. + + Note that distributing a compiled zlib library along with zlib.h and + zconf.h is also a source distribution, and so you should change + ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes + in zlib.h as you would for a full source distribution. + +25. Will zlib work on a big-endian or little-endian architecture, and can I + exchange compressed data between them? + + Yes and yes. + +26. Will zlib work on a 64-bit machine? + + Yes. It has been tested on 64-bit machines, and has no dependence on any + data types being limited to 32-bits in length. If you have any + difficulties, please provide a complete problem report to zlib@gzip.org + +27. Will zlib decompress data from the PKWare Data Compression Library? + + No. The PKWare DCL uses a completely different compressed data format than + does PKZIP and zlib. However, you can look in zlib's contrib/blast + directory for a possible solution to your problem. + +28. Can I access data randomly in a compressed stream? + + No, not without some preparation. If when compressing you periodically use + Z_FULL_FLUSH, carefully write all the pending data at those points, and + keep an index of those locations, then you can start decompression at those + points. You have to be careful to not use Z_FULL_FLUSH too often, since it + can significantly degrade compression. Alternatively, you can scan a + deflate stream once to generate an index, and then use that index for + random access. See examples/zran.c . + +29. Does zlib work on MVS, OS/390, CICS, etc.? + + It has in the past, but we have not heard of any recent evidence. There + were working ports of zlib 1.1.4 to MVS, but those links no longer work. + If you know of recent, successful applications of zlib on these operating + systems, please let us know. Thanks. + +30. Is there some simpler, easier to read version of inflate I can look at to + understand the deflate format? + + First off, you should read RFC 1951. Second, yes. Look in zlib's + contrib/puff directory. + +31. Does zlib infringe on any patents? + + As far as we know, no. In fact, that was originally the whole point behind + zlib. Look here for some more information: + + http://www.gzip.org/#faq11 + +32. Can zlib work with greater than 4 GB of data? + + Yes. inflate() and deflate() will process any amount of data correctly. + Each call of inflate() or deflate() is limited to input and output chunks + of the maximum value that can be stored in the compiler's "unsigned int" + type, but there is no limit to the number of chunks. Note however that the + strm.total_in and strm_total_out counters may be limited to 4 GB. These + counters are provided as a convenience and are not used internally by + inflate() or deflate(). The application can easily set up its own counters + updated after each call of inflate() or deflate() to count beyond 4 GB. + compress() and uncompress() may be limited to 4 GB, since they operate in a + single call. gzseek() and gztell() may be limited to 4 GB depending on how + zlib is compiled. See the zlibCompileFlags() function in zlib.h. + + The word "may" appears several times above since there is a 4 GB limit only + if the compiler's "long" type is 32 bits. If the compiler's "long" type is + 64 bits, then the limit is 16 exabytes. + +33. Does zlib have any security vulnerabilities? + + The only one that we are aware of is potentially in gzprintf(). If zlib is + compiled to use sprintf() or vsprintf(), then there is no protection + against a buffer overflow of an 8K string space (or other value as set by + gzbuffer()), other than the caller of gzprintf() assuring that the output + will not exceed 8K. On the other hand, if zlib is compiled to use + snprintf() or vsnprintf(), which should normally be the case, then there is + no vulnerability. The ./configure script will display warnings if an + insecure variation of sprintf() will be used by gzprintf(). Also the + zlibCompileFlags() function will return information on what variant of + sprintf() is used by gzprintf(). + + If you don't have snprintf() or vsnprintf() and would like one, you can + find a portable implementation here: + + http://www.ijs.si/software/snprintf/ + + Note that you should be using the most recent version of zlib. Versions + 1.1.3 and before were subject to a double-free vulnerability, and versions + 1.2.1 and 1.2.2 were subject to an access exception when decompressing + invalid compressed data. + +34. Is there a Java version of zlib? + + Probably what you want is to use zlib in Java. zlib is already included + as part of the Java SDK in the java.util.zip package. If you really want + a version of zlib written in the Java language, look on the zlib home + page for links: http://zlib.net/ . + +35. I get this or that compiler or source-code scanner warning when I crank it + up to maximally-pedantic. Can't you guys write proper code? + + Many years ago, we gave up attempting to avoid warnings on every compiler + in the universe. It just got to be a waste of time, and some compilers + were downright silly as well as contradicted each other. So now, we simply + make sure that the code always works. + +36. Valgrind (or some similar memory access checker) says that deflate is + performing a conditional jump that depends on an uninitialized value. + Isn't that a bug? + + No. That is intentional for performance reasons, and the output of deflate + is not affected. This only started showing up recently since zlib 1.2.x + uses malloc() by default for allocations, whereas earlier versions used + calloc(), which zeros out the allocated memory. Even though the code was + correct, versions 1.2.4 and later was changed to not stimulate these + checkers. + +37. Will zlib read the (insert any ancient or arcane format here) compressed + data format? + + Probably not. Look in the comp.compression FAQ for pointers to various + formats and associated software. + +38. How can I encrypt/decrypt zip files with zlib? + + zlib doesn't support encryption. The original PKZIP encryption is very + weak and can be broken with freely available programs. To get strong + encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib + compression. For PKZIP compatible "encryption", look at + http://www.info-zip.org/ + +39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings? + + "gzip" is the gzip format, and "deflate" is the zlib format. They should + probably have called the second one "zlib" instead to avoid confusion with + the raw deflate compressed data format. While the HTTP 1.1 RFC 2616 + correctly points to the zlib specification in RFC 1950 for the "deflate" + transfer encoding, there have been reports of servers and browsers that + incorrectly produce or expect raw deflate data per the deflate + specification in RFC 1951, most notably Microsoft. So even though the + "deflate" transfer encoding using the zlib format would be the more + efficient approach (and in fact exactly what the zlib format was designed + for), using the "gzip" transfer encoding is probably more reliable due to + an unfortunate choice of name on the part of the HTTP 1.1 authors. + + Bottom line: use the gzip format for HTTP 1.1 encoding. + +40. Does zlib support the new "Deflate64" format introduced by PKWare? + + No. PKWare has apparently decided to keep that format proprietary, since + they have not documented it as they have previous compression formats. In + any case, the compression improvements are so modest compared to other more + modern approaches, that it's not worth the effort to implement. + +41. I'm having a problem with the zip functions in zlib, can you help? + + There are no zip functions in zlib. You are probably using minizip by + Giles Vollant, which is found in the contrib directory of zlib. It is not + part of zlib. In fact none of the stuff in contrib is part of zlib. The + files in there are not supported by the zlib authors. You need to contact + the authors of the respective contribution for help. + +42. The match.asm code in contrib is under the GNU General Public License. + Since it's part of zlib, doesn't that mean that all of zlib falls under the + GNU GPL? + + No. The files in contrib are not part of zlib. They were contributed by + other authors and are provided as a convenience to the user within the zlib + distribution. Each item in contrib has its own license. + +43. Is zlib subject to export controls? What is its ECCN? + + zlib is not subject to export controls, and so is classified as EAR99. + +44. Can you please sign these lengthy legal documents and fax them back to us + so that we can use your software in our product? + + No. Go away. Shoo. diff --git a/deps/zlib-1.2.11/INDEX b/deps/zlib-1.2.11/INDEX new file mode 100755 index 0000000..2ba0641 --- /dev/null +++ b/deps/zlib-1.2.11/INDEX @@ -0,0 +1,68 @@ +CMakeLists.txt cmake build file +ChangeLog history of changes +FAQ Frequently Asked Questions about zlib +INDEX this file +Makefile dummy Makefile that tells you to ./configure +Makefile.in template for Unix Makefile +README guess what +configure configure script for Unix +make_vms.com makefile for VMS +test/example.c zlib usages examples for build testing +test/minigzip.c minimal gzip-like functionality for build testing +test/infcover.c inf*.c code coverage for build coverage testing +treebuild.xml XML description of source file dependencies +zconf.h.cmakein zconf.h template for cmake +zconf.h.in zconf.h template for configure +zlib.3 Man page for zlib +zlib.3.pdf Man page in PDF format +zlib.map Linux symbol information +zlib.pc.in Template for pkg-config descriptor +zlib.pc.cmakein zlib.pc template for cmake +zlib2ansi perl script to convert source files for C++ compilation + +amiga/ makefiles for Amiga SAS C +as400/ makefiles for AS/400 +doc/ documentation for formats and algorithms +msdos/ makefiles for MSDOS +nintendods/ makefile for Nintendo DS +old/ makefiles for various architectures and zlib documentation + files that have not yet been updated for zlib 1.2.x +qnx/ makefiles for QNX +watcom/ makefiles for OpenWatcom +win32/ makefiles for Windows + + zlib public header files (required for library use): +zconf.h +zlib.h + + private source files used to build the zlib library: +adler32.c +compress.c +crc32.c +crc32.h +deflate.c +deflate.h +gzclose.c +gzguts.h +gzlib.c +gzread.c +gzwrite.c +infback.c +inffast.c +inffast.h +inffixed.h +inflate.c +inflate.h +inftrees.c +inftrees.h +trees.c +trees.h +uncompr.c +zutil.c +zutil.h + + source files for sample programs +See examples/README.examples + + unsupported contributions by third parties +See contrib/README.contrib diff --git a/deps/zlib-1.2.11/Makefile b/deps/zlib-1.2.11/Makefile new file mode 100755 index 0000000..6bba86c --- /dev/null +++ b/deps/zlib-1.2.11/Makefile @@ -0,0 +1,5 @@ +all: + -@echo "Please use ./configure first. Thank you." + +distclean: + make -f Makefile.in distclean diff --git a/deps/zlib-1.2.11/Makefile.in b/deps/zlib-1.2.11/Makefile.in new file mode 100755 index 0000000..5a77949 --- /dev/null +++ b/deps/zlib-1.2.11/Makefile.in @@ -0,0 +1,410 @@ +# Makefile for zlib +# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler +# For conditions of distribution and use, see copyright notice in zlib.h + +# To compile and test, type: +# ./configure; make test +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static + +# To use the asm code, type: +# cp contrib/asm?86/match.S ./match.S +# make LOC=-DASMV OBJA=match.o + +# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type: +# make install +# To install in $HOME instead of /usr/local, use: +# make install prefix=$HOME + +CC=cc + +CFLAGS=-O +#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7 +#CFLAGS=-g -DZLIB_DEBUG +#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \ +# -Wstrict-prototypes -Wmissing-prototypes + +SFLAGS=-O +LDFLAGS= +TEST_LDFLAGS=-L. libz.a +LDSHARED=$(CC) +CPP=$(CC) -E + +STATICLIB=libz.a +SHAREDLIB=libz.so +SHAREDLIBV=libz.so.1.2.11 +SHAREDLIBM=libz.so.1 +LIBS=$(STATICLIB) $(SHAREDLIBV) + +AR=ar +ARFLAGS=rc +RANLIB=ranlib +LDCONFIG=ldconfig +LDSHAREDLIBC=-lc +TAR=tar +SHELL=/bin/sh +EXE= + +prefix = /usr/local +exec_prefix = ${prefix} +libdir = ${exec_prefix}/lib +sharedlibdir = ${libdir} +includedir = ${prefix}/include +mandir = ${prefix}/share/man +man3dir = ${mandir}/man3 +pkgconfigdir = ${libdir}/pkgconfig +SRCDIR= +ZINC= +ZINCOUT=-I. + +OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o +OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o +OBJC = $(OBJZ) $(OBJG) + +PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo +PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo +PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG) + +# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo +OBJA = +PIC_OBJA = + +OBJS = $(OBJC) $(OBJA) + +PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA) + +all: static shared + +static: example$(EXE) minigzip$(EXE) + +shared: examplesh$(EXE) minigzipsh$(EXE) + +all64: example64$(EXE) minigzip64$(EXE) + +check: test + +test: all teststatic testshared + +teststatic: static + @TMPST=tmpst_$$; \ + if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \ + echo ' *** zlib test OK ***'; \ + else \ + echo ' *** zlib test FAILED ***'; false; \ + fi; \ + rm -f $$TMPST + +testshared: shared + @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \ + LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \ + DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \ + SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \ + TMPSH=tmpsh_$$; \ + if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \ + echo ' *** zlib shared test OK ***'; \ + else \ + echo ' *** zlib shared test FAILED ***'; false; \ + fi; \ + rm -f $$TMPSH + +test64: all64 + @TMP64=tmp64_$$; \ + if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \ + echo ' *** zlib 64-bit test OK ***'; \ + else \ + echo ' *** zlib 64-bit test FAILED ***'; false; \ + fi; \ + rm -f $$TMP64 + +infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h + $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c + +infcover: infcover.o libz.a + $(CC) $(CFLAGS) -o $@ infcover.o libz.a + +cover: infcover + rm -f *.gcda + ./infcover + gcov inf*.c + +libz.a: $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + -@ ($(RANLIB) $@ || true) >/dev/null 2>&1 + +match.o: match.S + $(CPP) match.S > _match.s + $(CC) -c _match.s + mv _match.o match.o + rm -f _match.s + +match.lo: match.S + $(CPP) match.S > _match.s + $(CC) -c -fPIC _match.s + mv _match.o match.lo + rm -f _match.s + +example.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h + $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/example.c + +minigzip.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h + $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/minigzip.c + +example64.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h + $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/example.c + +minigzip64.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h + $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ $(SRCDIR)test/minigzip.c + + +adler32.o: $(SRCDIR)adler32.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)adler32.c + +crc32.o: $(SRCDIR)crc32.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)crc32.c + +deflate.o: $(SRCDIR)deflate.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c + +infback.o: $(SRCDIR)infback.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)infback.c + +inffast.o: $(SRCDIR)inffast.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inffast.c + +inflate.o: $(SRCDIR)inflate.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inflate.c + +inftrees.o: $(SRCDIR)inftrees.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inftrees.c + +trees.o: $(SRCDIR)trees.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)trees.c + +zutil.o: $(SRCDIR)zutil.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)zutil.c + +compress.o: $(SRCDIR)compress.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)compress.c + +uncompr.o: $(SRCDIR)uncompr.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)uncompr.c + +gzclose.o: $(SRCDIR)gzclose.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzclose.c + +gzlib.o: $(SRCDIR)gzlib.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzlib.c + +gzread.o: $(SRCDIR)gzread.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzread.c + +gzwrite.o: $(SRCDIR)gzwrite.c + $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c + + +adler32.lo: $(SRCDIR)adler32.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/adler32.o $(SRCDIR)adler32.c + -@mv objs/adler32.o $@ + +crc32.lo: $(SRCDIR)crc32.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/crc32.o $(SRCDIR)crc32.c + -@mv objs/crc32.o $@ + +deflate.lo: $(SRCDIR)deflate.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/deflate.o $(SRCDIR)deflate.c + -@mv objs/deflate.o $@ + +infback.lo: $(SRCDIR)infback.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/infback.o $(SRCDIR)infback.c + -@mv objs/infback.o $@ + +inffast.lo: $(SRCDIR)inffast.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inffast.o $(SRCDIR)inffast.c + -@mv objs/inffast.o $@ + +inflate.lo: $(SRCDIR)inflate.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inflate.o $(SRCDIR)inflate.c + -@mv objs/inflate.o $@ + +inftrees.lo: $(SRCDIR)inftrees.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c + -@mv objs/inftrees.o $@ + +trees.lo: $(SRCDIR)trees.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/trees.o $(SRCDIR)trees.c + -@mv objs/trees.o $@ + +zutil.lo: $(SRCDIR)zutil.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/zutil.o $(SRCDIR)zutil.c + -@mv objs/zutil.o $@ + +compress.lo: $(SRCDIR)compress.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/compress.o $(SRCDIR)compress.c + -@mv objs/compress.o $@ + +uncompr.lo: $(SRCDIR)uncompr.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c + -@mv objs/uncompr.o $@ + +gzclose.lo: $(SRCDIR)gzclose.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c + -@mv objs/gzclose.o $@ + +gzlib.lo: $(SRCDIR)gzlib.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c + -@mv objs/gzlib.o $@ + +gzread.lo: $(SRCDIR)gzread.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzread.o $(SRCDIR)gzread.c + -@mv objs/gzread.o $@ + +gzwrite.lo: $(SRCDIR)gzwrite.c + -@mkdir objs 2>/dev/null || test -d objs + $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c + -@mv objs/gzwrite.o $@ + + +placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a + $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS) + rm -f $(SHAREDLIB) $(SHAREDLIBM) + ln -s $@ $(SHAREDLIB) + ln -s $@ $(SHAREDLIBM) + -@rmdir objs + +example$(EXE): example.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS) + +minigzip$(EXE): minigzip.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS) + +examplesh$(EXE): example.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV) + +minigzipsh$(EXE): minigzip.o $(SHAREDLIBV) + $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV) + +example64$(EXE): example64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS) + +minigzip64$(EXE): minigzip64.o $(STATICLIB) + $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS) + +install-libs: $(LIBS) + -@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi + -@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi + -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi + -@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi + -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi + rm -f $(DESTDIR)$(libdir)/$(STATICLIB) + cp $(STATICLIB) $(DESTDIR)$(libdir) + chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB) + -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1 + -@if test -n "$(SHAREDLIBV)"; then \ + rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ + cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \ + echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \ + chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \ + echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \ + rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \ + ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \ + ($(LDCONFIG) || true) >/dev/null 2>&1; \ + fi + rm -f $(DESTDIR)$(man3dir)/zlib.3 + cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir) + chmod 644 $(DESTDIR)$(man3dir)/zlib.3 + rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc + cp zlib.pc $(DESTDIR)$(pkgconfigdir) + chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc +# The ranlib in install is needed on NeXTSTEP which checks file times +# ldconfig is for Linux + +install: install-libs + -@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi + rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h + cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir) + chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h + +uninstall: + cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h + cd $(DESTDIR)$(libdir) && rm -f libz.a; \ + if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \ + rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \ + fi + cd $(DESTDIR)$(man3dir) && rm -f zlib.3 + cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc + +docs: zlib.3.pdf + +zlib.3.pdf: $(SRCDIR)zlib.3 + groff -mandoc -f H -T ps $(SRCDIR)zlib.3 | ps2pdf - $@ + +zconf.h.cmakein: $(SRCDIR)zconf.h.in + -@ TEMPFILE=zconfh_$$; \ + echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\ + sed -f $$TEMPFILE $(SRCDIR)zconf.h.in > $@ &&\ + touch -r $(SRCDIR)zconf.h.in $@ &&\ + rm $$TEMPFILE + +zconf: $(SRCDIR)zconf.h.in + cp -p $(SRCDIR)zconf.h.in zconf.h + +mostlyclean: clean +clean: + rm -f *.o *.lo *~ \ + example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \ + example64$(EXE) minigzip64$(EXE) \ + infcover \ + libz.* foo.gz so_locations \ + _match.s maketree contrib/infback9/*.o + rm -rf objs + rm -f *.gcda *.gcno *.gcov + rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov + +maintainer-clean: distclean +distclean: clean zconf zconf.h.cmakein docs + rm -f Makefile zlib.pc configure.log + -@rm -f .DS_Store + @if [ -f Makefile.in ]; then \ + printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile ; \ + printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \ + touch -r $(SRCDIR)Makefile.in Makefile ; fi + @if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi + @if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi + +tags: + etags $(SRCDIR)*.[ch] + +adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h +gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h +compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h +crc32.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h +deflate.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h +infback.o inflate.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h +inffast.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h +inftrees.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h +trees.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h + +adler32.lo zutil.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h +gzclose.lo gzlib.lo gzread.lo gzwrite.lo: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h +compress.lo example.lo minigzip.lo uncompr.lo: $(SRCDIR)zlib.h zconf.h +crc32.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h +deflate.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h +infback.lo inflate.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h +inffast.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h +inftrees.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h +trees.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)trees.h diff --git a/deps/zlib-1.2.11/adler32.c b/deps/zlib-1.2.11/adler32.c old mode 100644 new mode 100755 index 87ce4c1..d0be438 --- a/deps/zlib-1.2.11/adler32.c +++ b/deps/zlib-1.2.11/adler32.c @@ -7,6 +7,8 @@ #include "zutil.h" +local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2)); + #define BASE 65521U /* largest prime smaller than 65536 */ #define NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ @@ -17,9 +19,45 @@ #define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); #define DO16(buf) DO8(buf,0); DO8(buf,8); -#define MOD(a) a %= BASE -#define MOD28(a) a %= BASE -#define MOD63(a) a %= BASE +/* use NO_DIVIDE if your processor does not do division in hardware -- + try it both ways to see which is faster */ +#ifdef NO_DIVIDE +/* note that this assumes BASE is 65521, where 65536 % 65521 == 15 + (thank you to John Reiser for pointing this out) */ +# define CHOP(a) \ + do { \ + unsigned long tmp = a >> 16; \ + a &= 0xffffUL; \ + a += (tmp << 4) - tmp; \ + } while (0) +# define MOD28(a) \ + do { \ + CHOP(a); \ + if (a >= BASE) a -= BASE; \ + } while (0) +# define MOD(a) \ + do { \ + CHOP(a); \ + MOD28(a); \ + } while (0) +# define MOD63(a) \ + do { /* this assumes a is not negative */ \ + z_off64_t tmp = a >> 32; \ + a &= 0xffffffffL; \ + a += (tmp << 8) - (tmp << 5) + tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + tmp = a >> 16; \ + a &= 0xffffL; \ + a += (tmp << 4) - tmp; \ + if (a >= BASE) a -= BASE; \ + } while (0) +#else +# define MOD(a) a %= BASE +# define MOD28(a) a %= BASE +# define MOD63(a) a %= BASE +#endif /* ========================================================================= */ uLong ZEXPORT adler32_z(adler, buf, len) @@ -100,3 +138,49 @@ uLong ZEXPORT adler32(adler, buf, len) { return adler32_z(adler, buf, len); } + +/* ========================================================================= */ +local uLong adler32_combine_(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + unsigned long sum1; + unsigned long sum2; + unsigned rem; + + /* for negative len, return invalid adler32 as a clue for debugging */ + if (len2 < 0) + return 0xffffffffUL; + + /* the derivation of this formula is left as an exercise for the reader */ + MOD63(len2); /* assumes len2 >= 0 */ + rem = (unsigned)len2; + sum1 = adler1 & 0xffff; + sum2 = rem * sum1; + MOD(sum2); + sum1 += (adler2 & 0xffff) + BASE - 1; + sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; + if (sum1 >= BASE) sum1 -= BASE; + if (sum1 >= BASE) sum1 -= BASE; + if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1); + if (sum2 >= BASE) sum2 -= BASE; + return sum1 | (sum2 << 16); +} + +/* ========================================================================= */ +uLong ZEXPORT adler32_combine(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} + +uLong ZEXPORT adler32_combine64(adler1, adler2, len2) + uLong adler1; + uLong adler2; + z_off64_t len2; +{ + return adler32_combine_(adler1, adler2, len2); +} diff --git a/deps/zlib-1.2.11/configure b/deps/zlib-1.2.11/configure new file mode 100755 index 0000000..e974d1f --- /dev/null +++ b/deps/zlib-1.2.11/configure @@ -0,0 +1,921 @@ +#!/bin/sh +# configure script for zlib. +# +# Normally configure builds both a static and a shared library. +# If you want to build just a static library, use: ./configure --static +# +# To impose specific compiler or flags or install directory, use for example: +# prefix=$HOME CC=cc CFLAGS="-O4" ./configure +# or for csh/tcsh users: +# (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure) + +# Incorrect settings of CC or CFLAGS may prevent creating a shared library. +# If you have problems, try without defining CC and CFLAGS before reporting +# an error. + +# start off configure.log +echo -------------------- >> configure.log +echo $0 $* >> configure.log +date >> configure.log + +# get source directory +SRCDIR=`dirname $0` +if test $SRCDIR = "."; then + ZINC="" + ZINCOUT="-I." + SRCDIR="" +else + ZINC='-include zconf.h' + ZINCOUT='-I. -I$(SRCDIR)' + SRCDIR="$SRCDIR/" +fi + +# set command prefix for cross-compilation +if [ -n "${CHOST}" ]; then + uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`" + CROSS_PREFIX="${CHOST}-" +fi + +# destination name for static library +STATICLIB=libz.a + +# extract zlib version numbers from zlib.h +VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < ${SRCDIR}zlib.h` +VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < ${SRCDIR}zlib.h` +VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h` +VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < ${SRCDIR}zlib.h` + +# establish commands for library building +if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then + AR=${AR-"${CROSS_PREFIX}ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +else + AR=${AR-"ar"} + test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log +fi +ARFLAGS=${ARFLAGS-"rc"} +if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then + RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"} + test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log +else + RANLIB=${RANLIB-"ranlib"} +fi +if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then + NM=${NM-"${CROSS_PREFIX}nm"} + test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log +else + NM=${NM-"nm"} +fi + +# set defaults before processing command line options +LDCONFIG=${LDCONFIG-"ldconfig"} +LDSHAREDLIBC="${LDSHAREDLIBC--lc}" +ARCHS= +prefix=${prefix-/usr/local} +exec_prefix=${exec_prefix-'${prefix}'} +libdir=${libdir-'${exec_prefix}/lib'} +sharedlibdir=${sharedlibdir-'${libdir}'} +includedir=${includedir-'${prefix}/include'} +mandir=${mandir-'${prefix}/share/man'} +shared_ext='.so' +shared=1 +solo=0 +cover=0 +zprefix=0 +zconst=0 +build64=0 +gcc=0 +warn=0 +debug=0 +old_cc="$CC" +old_cflags="$CFLAGS" +OBJC='$(OBJZ) $(OBJG)' +PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)' + +# leave this script, optionally in a bad way +leave() +{ + if test "$*" != "0"; then + echo "** $0 aborting." | tee -a configure.log + fi + rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version + echo -------------------- >> configure.log + echo >> configure.log + echo >> configure.log + exit $1 +} + +# process command line options +while test $# -ge 1 +do +case "$1" in + -h* | --help) + echo 'usage:' | tee -a configure.log + echo ' configure [--const] [--zprefix] [--prefix=PREFIX] [--eprefix=EXPREFIX]' | tee -a configure.log + echo ' [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log + echo ' [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log + exit 0 ;; + -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;; + -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;; + --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;; + -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;; + -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;; + -p* | --prefix) prefix="$2"; shift; shift ;; + -e* | --eprefix) exec_prefix="$2"; shift; shift ;; + -l* | --libdir) libdir="$2"; shift; shift ;; + -i* | --includedir) includedir="$2"; shift; shift ;; + -s* | --shared | --enable-shared) shared=1; shift ;; + -t | --static) shared=0; shift ;; + --solo) solo=1; shift ;; + --cover) cover=1; shift ;; + -z* | --zprefix) zprefix=1; shift ;; + -6* | --64) build64=1; shift ;; + -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;; + --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;; + --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;; + -c* | --const) zconst=1; shift ;; + -w* | --warn) warn=1; shift ;; + -d* | --debug) debug=1; shift ;; + *) + echo "unknown option: $1" | tee -a configure.log + echo "$0 --help for help" | tee -a configure.log + leave 1;; + esac +done + +# temporary file name +test=ztest$$ + +# put arguments in log, also put test file in log if used in arguments +show() +{ + case "$*" in + *$test.c*) + echo === $test.c === >> configure.log + cat $test.c >> configure.log + echo === >> configure.log;; + esac + echo $* >> configure.log +} + +# check for gcc vs. cc and set compile and link flags based on the system identified by uname +cat > $test.c <&1` in + *gcc*) gcc=1 ;; + *clang*) gcc=1 ;; +esac + +show $cc -c $test.c +if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then + echo ... using gcc >> configure.log + CC="$cc" + CFLAGS="${CFLAGS--O3}" + SFLAGS="${CFLAGS--O3} -fPIC" + if test "$ARCHS"; then + CFLAGS="${CFLAGS} ${ARCHS}" + LDFLAGS="${LDFLAGS} ${ARCHS}" + fi + if test $build64 -eq 1; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + fi + if test "$warn" -eq 1; then + if test "$zconst" -eq 1; then + CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST" + else + CFLAGS="${CFLAGS} -Wall -Wextra -pedantic" + fi + fi + if test $debug -eq 1; then + CFLAGS="${CFLAGS} -DZLIB_DEBUG" + SFLAGS="${SFLAGS} -DZLIB_DEBUG" + fi + if test -z "$uname"; then + uname=`(uname -s || echo unknown) 2>/dev/null` + fi + case "$uname" in + Linux* | linux* | GNU | GNU/* | solaris*) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"} ;; + *BSD | *bsd* | DragonFly) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,${SRCDIR}zlib.map"} + LDCONFIG="ldconfig -m" ;; + CYGWIN* | Cygwin* | cygwin* | OS/2*) + EXE='.exe' ;; + MINGW* | mingw*) +# temporary bypass + rm -f $test.[co] $test $test$shared_ext + echo "Please use win32/Makefile.gcc instead." | tee -a configure.log + leave 1 + LDSHARED=${LDSHARED-"$cc -shared"} + LDSHAREDLIBC="" + EXE='.exe' ;; + QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4 + # (alain.bonnefoy@icbt.com) + LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;; + HP-UX*) + LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + Darwin* | darwin*) + shared_ext='.dylib' + SHAREDLIB=libz$shared_ext + SHAREDLIBV=libz.$VER$shared_ext + SHAREDLIBM=libz.$VER1$shared_ext + LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} + if libtool -V 2>&1 | grep Apple > /dev/null; then + AR="libtool" + else + AR="/usr/bin/libtool" + fi + ARFLAGS="-o" ;; + *) LDSHARED=${LDSHARED-"$cc -shared"} ;; + esac +else + # find system name and corresponding cc options + CC=${CC-cc} + gcc=0 + echo ... using $CC >> configure.log + if test -z "$uname"; then + uname=`(uname -sr || echo unknown) 2>/dev/null` + fi + case "$uname" in + HP-UX*) SFLAGS=${CFLAGS-"-O +z"} + CFLAGS=${CFLAGS-"-O"} +# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"} + LDSHARED=${LDSHARED-"ld -b"} + case `(uname -m || echo unknown) 2>/dev/null` in + ia64) + shared_ext='.so' + SHAREDLIB='libz.so' ;; + *) + shared_ext='.sl' + SHAREDLIB='libz.sl' ;; + esac ;; + IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."} + CFLAGS=${CFLAGS-"-ansi -O2"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDFLAGS="${LDFLAGS} -Wl,-rpath,." + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;; + OSF1*) SFLAGS=${CFLAGS-"-O -std1"} + CFLAGS=${CFLAGS-"-O -std1"} + LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;; + QNX*) SFLAGS=${CFLAGS-"-4 -O"} + CFLAGS=${CFLAGS-"-4 -O"} + LDSHARED=${LDSHARED-"cc"} + RANLIB=${RANLIB-"true"} + AR="cc" + ARFLAGS="-A" ;; + SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "} + CFLAGS=${CFLAGS-"-O3"} + LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;; + SunOS\ 5* | solaris*) + LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"} + SFLAGS=${CFLAGS-"-fast -KPIC"} + CFLAGS=${CFLAGS-"-fast"} + if test $build64 -eq 1; then + # old versions of SunPRO/Workshop/Studio don't support -m64, + # but newer ones do. Check for it. + flag64=`$CC -flags | egrep -- '^-m64'` + if test x"$flag64" != x"" ; then + CFLAGS="${CFLAGS} -m64" + SFLAGS="${SFLAGS} -m64" + else + case `(uname -m || echo unknown) 2>/dev/null` in + i86*) + SFLAGS="$SFLAGS -xarch=amd64" + CFLAGS="$CFLAGS -xarch=amd64" ;; + *) + SFLAGS="$SFLAGS -xarch=v9" + CFLAGS="$CFLAGS -xarch=v9" ;; + esac + fi + fi + if test -n "$ZINC"; then + ZINC='-I- -I. -I$(SRCDIR)' + fi + ;; + SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"} + CFLAGS=${CFLAGS-"-O2"} + LDSHARED=${LDSHARED-"ld"} ;; + SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"} + CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"} + LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;; + UNIX_System_V\ 4.2.0) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + UNIX_SV\ 4.2MP) + SFLAGS=${CFLAGS-"-Kconform_pic -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + OpenUNIX\ 5) + SFLAGS=${CFLAGS-"-KPIC -O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -G"} ;; + AIX*) # Courtesy of dbakker@arrayasolutions.com + SFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + CFLAGS=${CFLAGS-"-O -qmaxmem=8192"} + LDSHARED=${LDSHARED-"xlc -G"} ;; + # send working options for other systems to zlib@gzip.org + *) SFLAGS=${CFLAGS-"-O"} + CFLAGS=${CFLAGS-"-O"} + LDSHARED=${LDSHARED-"cc -shared"} ;; + esac +fi + +# destination names for shared library if not defined above +SHAREDLIB=${SHAREDLIB-"libz$shared_ext"} +SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"} +SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"} + +echo >> configure.log + +# define functions for testing compiler and library characteristics and logging the results + +cat > $test.c </dev/null; then + try() + { + show $* + test "`( $* ) 2>&1 | tee -a configure.log`" = "" + } + echo - using any output from compiler to indicate an error >> configure.log +else + try() + { + show $* + ( $* ) >> configure.log 2>&1 + ret=$? + if test $ret -ne 0; then + echo "(exit code "$ret")" >> configure.log + fi + return $ret + } +fi + +tryboth() +{ + show $* + got=`( $* ) 2>&1` + ret=$? + printf %s "$got" >> configure.log + if test $ret -ne 0; then + return $ret + fi + test "$got" = "" +} + +cat > $test.c << EOF +int foo() { return 0; } +EOF +echo "Checking for obsessive-compulsive compiler options..." >> configure.log +if try $CC -c $CFLAGS $test.c; then + : +else + echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log + leave 1 +fi + +echo >> configure.log + +# see if shared library build supported +cat > $test.c <> configure.log + show "$NM $test.o | grep _hello" + if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then + CPP="$CPP -DNO_UNDERLINE" + echo Checking for underline in external names... No. | tee -a configure.log + else + echo Checking for underline in external names... Yes. | tee -a configure.log + fi ;; +esac + +echo >> configure.log + +# check for size_t +cat > $test.c < +#include +size_t dummy = 0; +EOF +if try $CC -c $CFLAGS $test.c; then + echo "Checking for size_t... Yes." | tee -a configure.log + need_sizet=0 +else + echo "Checking for size_t... No." | tee -a configure.log + need_sizet=1 +fi + +echo >> configure.log + +# find the size_t integer type, if needed +if test $need_sizet -eq 1; then + cat > $test.c < $test.c < +int main(void) { + if (sizeof(void *) <= sizeof(int)) puts("int"); + else if (sizeof(void *) <= sizeof(long)) puts("long"); + else puts("z_longlong"); + return 0; +} +EOF + else + echo "Checking for long long... No." | tee -a configure.log + cat > $test.c < +int main(void) { + if (sizeof(void *) <= sizeof(int)) puts("int"); + else puts("long"); + return 0; +} +EOF + fi + if try $CC $CFLAGS -o $test $test.c; then + sizet=`./$test` + echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log + else + echo "Failed to find a pointer-size integer type." | tee -a configure.log + leave 1 + fi +fi + +if test $need_sizet -eq 1; then + CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}" + SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}" +fi + +echo >> configure.log + +# check for large file support, and if none, check for fseeko() +cat > $test.c < +off64_t dummy = 0; +EOF +if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then + CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1" + SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1" + ALL="${ALL} all64" + TEST="${TEST} test64" + echo "Checking for off64_t... Yes." | tee -a configure.log + echo "Checking for fseeko... Yes." | tee -a configure.log +else + echo "Checking for off64_t... No." | tee -a configure.log + echo >> configure.log + cat > $test.c < +int main(void) { + fseeko(NULL, 0, 0); + return 0; +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for fseeko... Yes." | tee -a configure.log + else + CFLAGS="${CFLAGS} -DNO_FSEEKO" + SFLAGS="${SFLAGS} -DNO_FSEEKO" + echo "Checking for fseeko... No." | tee -a configure.log + fi +fi + +echo >> configure.log + +# check for strerror() for use by gz* functions +cat > $test.c < +#include +int main() { return strlen(strerror(errno)); } +EOF +if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for strerror... Yes." | tee -a configure.log +else + CFLAGS="${CFLAGS} -DNO_STRERROR" + SFLAGS="${SFLAGS} -DNO_STRERROR" + echo "Checking for strerror... No." | tee -a configure.log +fi + +# copy clean zconf.h for subsequent edits +cp -p ${SRCDIR}zconf.h.in zconf.h + +echo >> configure.log + +# check for unistd.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for unistd.h... Yes." | tee -a configure.log +else + echo "Checking for unistd.h... No." | tee -a configure.log +fi + +echo >> configure.log + +# check for stdarg.h and save result in zconf.h +cat > $test.c < +int main() { return 0; } +EOF +if try $CC -c $CFLAGS $test.c; then + sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo "Checking for stdarg.h... Yes." | tee -a configure.log +else + echo "Checking for stdarg.h... No." | tee -a configure.log +fi + +# if the z_ prefix was requested, save that in zconf.h +if test $zprefix -eq 1; then + sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h + mv zconf.temp.h zconf.h + echo >> configure.log + echo "Using z_ prefix on all symbols." | tee -a configure.log +fi + +# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists +if test $solo -eq 1; then + sed '/#define ZCONF_H/a\ +#define Z_SOLO + +' < zconf.h > zconf.temp.h + mv zconf.temp.h zconf.h +OBJC='$(OBJZ)' +PIC_OBJC='$(PIC_OBJZ)' +fi + +# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X +if test $cover -eq 1; then + CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage" + if test -n "$GCC_CLASSIC"; then + CC=$GCC_CLASSIC + fi +fi + +echo >> configure.log + +# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions +# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a +# return value. The most secure result is vsnprintf() with a return value. snprintf() with a +# return value is secure as well, but then gzprintf() will be limited to 20 arguments. +cat > $test.c < +#include +#include "zconf.h" +int main() +{ +#ifndef STDC + choke me +#endif + return 0; +} +EOF +if try $CC -c $CFLAGS $test.c; then + echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log + + echo >> configure.log + cat > $test.c < +#include +int mytest(const char *fmt, ...) +{ + char buf[20]; + va_list ap; + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return 0; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsnprintf_void" + SFLAGS="$SFLAGS -DHAS_vsnprintf_void" + echo "Checking for return value of vsnprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_vsnprintf" + SFLAGS="$SFLAGS -DNO_vsnprintf" + echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +#include +int mytest(const char *fmt, ...) +{ + int n; + char buf[20]; + va_list ap; + va_start(ap, fmt); + n = vsprintf(buf, fmt, ap); + va_end(ap); + return n; +} +int main() +{ + return (mytest("Hello%d\n", 1)); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_vsprintf_void" + SFLAGS="$SFLAGS -DHAS_vsprintf_void" + echo "Checking for return value of vsprintf()... No." | tee -a configure.log + echo " WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +else + echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + snprintf(buf, sizeof(buf), "%s", "foo"); + return 0; +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC $CFLAGS -o $test $test.c; then + echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return snprintf(buf, sizeof(buf), "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of snprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_snprintf_void" + SFLAGS="$SFLAGS -DHAS_snprintf_void" + echo "Checking for return value of snprintf()... No." | tee -a configure.log + echo " WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + else + CFLAGS="$CFLAGS -DNO_snprintf" + SFLAGS="$SFLAGS -DNO_snprintf" + echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log + echo " WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log + echo " can build but will be open to possible buffer-overflow security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + + echo >> configure.log + cat >$test.c < +int mytest() +{ + char buf[20]; + return sprintf(buf, "%s", "foo"); +} +int main() +{ + return (mytest()); +} +EOF + + if try $CC -c $CFLAGS $test.c; then + echo "Checking for return value of sprintf()... Yes." | tee -a configure.log + else + CFLAGS="$CFLAGS -DHAS_sprintf_void" + SFLAGS="$SFLAGS -DHAS_sprintf_void" + echo "Checking for return value of sprintf()... No." | tee -a configure.log + echo " WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log + echo " can build but will be open to possible string-format security" | tee -a configure.log + echo " vulnerabilities." | tee -a configure.log + fi + fi +fi + +# see if we can hide zlib internal symbols that are linked between separate source files +if test "$gcc" -eq 1; then + echo >> configure.log + cat > $test.c <> configure.log +echo ALL = $ALL >> configure.log +echo AR = $AR >> configure.log +echo ARFLAGS = $ARFLAGS >> configure.log +echo CC = $CC >> configure.log +echo CFLAGS = $CFLAGS >> configure.log +echo CPP = $CPP >> configure.log +echo EXE = $EXE >> configure.log +echo LDCONFIG = $LDCONFIG >> configure.log +echo LDFLAGS = $LDFLAGS >> configure.log +echo LDSHARED = $LDSHARED >> configure.log +echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log +echo OBJC = $OBJC >> configure.log +echo PIC_OBJC = $PIC_OBJC >> configure.log +echo RANLIB = $RANLIB >> configure.log +echo SFLAGS = $SFLAGS >> configure.log +echo SHAREDLIB = $SHAREDLIB >> configure.log +echo SHAREDLIBM = $SHAREDLIBM >> configure.log +echo SHAREDLIBV = $SHAREDLIBV >> configure.log +echo STATICLIB = $STATICLIB >> configure.log +echo TEST = $TEST >> configure.log +echo VER = $VER >> configure.log +echo Z_U4 = $Z_U4 >> configure.log +echo SRCDIR = $SRCDIR >> configure.log +echo exec_prefix = $exec_prefix >> configure.log +echo includedir = $includedir >> configure.log +echo libdir = $libdir >> configure.log +echo mandir = $mandir >> configure.log +echo prefix = $prefix >> configure.log +echo sharedlibdir = $sharedlibdir >> configure.log +echo uname = $uname >> configure.log + +# udpate Makefile with the configure results +sed < ${SRCDIR}Makefile.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^SFLAGS *=/s#=.*#=$SFLAGS# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^CPP *=/s#=.*#=$CPP# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^LDCONFIG *=/s#=.*#=$LDCONFIG# +/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC# +/^EXE *=/s#=.*#=$EXE# +/^SRCDIR *=/s#=.*#=$SRCDIR# +/^ZINC *=/s#=.*#=$ZINC# +/^ZINCOUT *=/s#=.*#=$ZINCOUT# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^OBJC *=/s#=.*#= $OBJC# +/^PIC_OBJC *=/s#=.*#= $PIC_OBJC# +/^all: */s#:.*#: $ALL# +/^test: */s#:.*#: $TEST# +" > Makefile + +# create zlib.pc with the configure results +sed < ${SRCDIR}zlib.pc.in " +/^CC *=/s#=.*#=$CC# +/^CFLAGS *=/s#=.*#=$CFLAGS# +/^CPP *=/s#=.*#=$CPP# +/^LDSHARED *=/s#=.*#=$LDSHARED# +/^STATICLIB *=/s#=.*#=$STATICLIB# +/^SHAREDLIB *=/s#=.*#=$SHAREDLIB# +/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV# +/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM# +/^AR *=/s#=.*#=$AR# +/^ARFLAGS *=/s#=.*#=$ARFLAGS# +/^RANLIB *=/s#=.*#=$RANLIB# +/^EXE *=/s#=.*#=$EXE# +/^prefix *=/s#=.*#=$prefix# +/^exec_prefix *=/s#=.*#=$exec_prefix# +/^libdir *=/s#=.*#=$libdir# +/^sharedlibdir *=/s#=.*#=$sharedlibdir# +/^includedir *=/s#=.*#=$includedir# +/^mandir *=/s#=.*#=$mandir# +/^LDFLAGS *=/s#=.*#=$LDFLAGS# +" | sed -e " +s/\@VERSION\@/$VER/g; +" > zlib.pc + +# done +leave 0 diff --git a/deps/zlib-1.2.11/crc32.c b/deps/zlib-1.2.11/crc32.c old mode 100644 new mode 100755 index 30e0fdf..0d30913 --- a/deps/zlib-1.2.11/crc32.c +++ b/deps/zlib-1.2.11/crc32.c @@ -14,26 +14,63 @@ #include "zutil.h" /* for STDC and FAR definitions */ /* Definitions for doing the crc four data bytes at a time. */ -#define TBLS 1 +#if !defined(NOBYFOUR) && defined(Z_U4) +# define BYFOUR +#endif +#ifdef BYFOUR + local unsigned long crc32_little OF((unsigned long, + const unsigned char FAR *, z_size_t)); + local unsigned long crc32_big OF((unsigned long, + const unsigned char FAR *, z_size_t)); +# define TBLS 8 +#else +# define TBLS 1 +#endif /* BYFOUR */ + +/* Local functions for crc concatenation */ +local unsigned long gf2_matrix_times OF((unsigned long *mat, + unsigned long vec)); +local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); +local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2)); + /* ======================================================================== * Tables of CRC-32s of all single-byte values, made by make_crc_table(). */ #include "crc32.h" +/* ========================================================================= + * This function can be used by asm versions of crc32() + */ +const z_crc_t FAR * ZEXPORT get_crc_table() +{ + return (const z_crc_t FAR *)crc_table; +} + /* ========================================================================= */ #define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 /* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) +unsigned long ZEXPORT crc32_z(crc, buf, len) unsigned long crc; const unsigned char FAR *buf; - uInt len; + z_size_t len; { - if (buf == Z_NULL) - return 0UL; + if (buf == Z_NULL) return 0UL; + +#ifdef BYFOUR + if (sizeof(void *) == sizeof(ptrdiff_t)) { + z_crc_t endian; + + endian = 1; + if (*((unsigned char *)(&endian))) + return crc32_little(crc, buf, len); + else + return crc32_big(crc, buf, len); + } +#endif /* BYFOUR */ crc = crc ^ 0xffffffffUL; while (len >= 8) { DO8; @@ -44,3 +81,211 @@ unsigned long ZEXPORT crc32(crc, buf, len) } while (--len); return crc ^ 0xffffffffUL; } + +/* ========================================================================= */ +unsigned long ZEXPORT crc32(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + uInt len; +{ + return crc32_z(crc, buf, len); +} + +#ifdef BYFOUR + +/* + This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit + integer pointer type. This violates the strict aliasing rule, where a + compiler can assume, for optimization purposes, that two pointers to + fundamentally different types won't ever point to the same memory. This can + manifest as a problem only if one of the pointers is written to. This code + only reads from those pointers. So long as this code remains isolated in + this compilation unit, there won't be a problem. For this reason, this code + should not be copied and pasted into a compilation unit in which other code + writes to the buffer that is passed to these routines. + */ + +/* ========================================================================= */ +#define DOLIT4 c ^= *buf4++; \ + c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ + crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] +#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 + +/* ========================================================================= */ +local unsigned long crc32_little(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + z_size_t len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = (z_crc_t)crc; + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + while (len >= 32) { + DOLIT32; + len -= 32; + } + while (len >= 4) { + DOLIT4; + len -= 4; + } + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); + } while (--len); + c = ~c; + return (unsigned long)c; +} + +/* ========================================================================= */ +#define DOBIG4 c ^= *buf4++; \ + c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ + crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] +#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 + +/* ========================================================================= */ +local unsigned long crc32_big(crc, buf, len) + unsigned long crc; + const unsigned char FAR *buf; + z_size_t len; +{ + register z_crc_t c; + register const z_crc_t FAR *buf4; + + c = ZSWAP32((z_crc_t)crc); + c = ~c; + while (len && ((ptrdiff_t)buf & 3)) { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + len--; + } + + buf4 = (const z_crc_t FAR *)(const void FAR *)buf; + while (len >= 32) { + DOBIG32; + len -= 32; + } + while (len >= 4) { + DOBIG4; + len -= 4; + } + buf = (const unsigned char FAR *)buf4; + + if (len) do { + c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); + } while (--len); + c = ~c; + return (unsigned long)(ZSWAP32(c)); +} + +#endif /* BYFOUR */ + +#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ + +/* ========================================================================= */ +local unsigned long gf2_matrix_times(mat, vec) + unsigned long *mat; + unsigned long vec; +{ + unsigned long sum; + + sum = 0; + while (vec) { + if (vec & 1) + sum ^= *mat; + vec >>= 1; + mat++; + } + return sum; +} + +/* ========================================================================= */ +local void gf2_matrix_square(square, mat) + unsigned long *square; + unsigned long *mat; +{ + int n; + + for (n = 0; n < GF2_DIM; n++) + square[n] = gf2_matrix_times(mat, mat[n]); +} + +/* ========================================================================= */ +local uLong crc32_combine_(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + int n; + unsigned long row; + unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ + unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ + + /* degenerate case (also disallow negative lengths) */ + if (len2 <= 0) + return crc1; + + /* put operator for one zero bit in odd */ + odd[0] = 0xedb88320UL; /* CRC-32 polynomial */ + row = 1; + for (n = 1; n < GF2_DIM; n++) { + odd[n] = row; + row <<= 1; + } + + /* put operator for two zero bits in even */ + gf2_matrix_square(even, odd); + + /* put operator for four zero bits in odd */ + gf2_matrix_square(odd, even); + + /* apply len2 zeros to crc1 (first square will put the operator for one + zero byte, eight zero bits, in even) */ + do { + /* apply zeros operator for this bit of len2 */ + gf2_matrix_square(even, odd); + if (len2 & 1) + crc1 = gf2_matrix_times(even, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + if (len2 == 0) + break; + + /* another iteration of the loop with odd and even swapped */ + gf2_matrix_square(odd, even); + if (len2 & 1) + crc1 = gf2_matrix_times(odd, crc1); + len2 >>= 1; + + /* if no more bits set, then done */ + } while (len2 != 0); + + /* return combined crc */ + crc1 ^= crc2; + return crc1; +} + +/* ========================================================================= */ +uLong ZEXPORT crc32_combine(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} + +uLong ZEXPORT crc32_combine64(crc1, crc2, len2) + uLong crc1; + uLong crc2; + z_off64_t len2; +{ + return crc32_combine_(crc1, crc2, len2); +} diff --git a/deps/zlib-1.2.11/crc32.h b/deps/zlib-1.2.11/crc32.h old mode 100644 new mode 100755 index af0e6c9..9e0c778 --- a/deps/zlib-1.2.11/crc32.h +++ b/deps/zlib-1.2.11/crc32.h @@ -57,5 +57,385 @@ local const z_crc_t FAR crc_table[TBLS][256] = 0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL, 0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL, 0x2d02ef8dUL +#ifdef BYFOUR + }, + { + 0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL, + 0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL, + 0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL, + 0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL, + 0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL, + 0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL, + 0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL, + 0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL, + 0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL, + 0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL, + 0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL, + 0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL, + 0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL, + 0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL, + 0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL, + 0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL, + 0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL, + 0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL, + 0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL, + 0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL, + 0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL, + 0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL, + 0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL, + 0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL, + 0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL, + 0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL, + 0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL, + 0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL, + 0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL, + 0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL, + 0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL, + 0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL, + 0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL, + 0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL, + 0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL, + 0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL, + 0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL, + 0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL, + 0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL, + 0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL, + 0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL, + 0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL, + 0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL, + 0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL, + 0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL, + 0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL, + 0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL, + 0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL, + 0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL, + 0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL, + 0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL, + 0x9324fd72UL + }, + { + 0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL, + 0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL, + 0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL, + 0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL, + 0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL, + 0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL, + 0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL, + 0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL, + 0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL, + 0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL, + 0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL, + 0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL, + 0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL, + 0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL, + 0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL, + 0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL, + 0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL, + 0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL, + 0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL, + 0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL, + 0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL, + 0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL, + 0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL, + 0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL, + 0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL, + 0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL, + 0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL, + 0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL, + 0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL, + 0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL, + 0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL, + 0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL, + 0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL, + 0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL, + 0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL, + 0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL, + 0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL, + 0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL, + 0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL, + 0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL, + 0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL, + 0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL, + 0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL, + 0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL, + 0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL, + 0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL, + 0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL, + 0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL, + 0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL, + 0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL, + 0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL, + 0xbe9834edUL + }, + { + 0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL, + 0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL, + 0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL, + 0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL, + 0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL, + 0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL, + 0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL, + 0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL, + 0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL, + 0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL, + 0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL, + 0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL, + 0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL, + 0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL, + 0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL, + 0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL, + 0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL, + 0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL, + 0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL, + 0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL, + 0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL, + 0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL, + 0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL, + 0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL, + 0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL, + 0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL, + 0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL, + 0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL, + 0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL, + 0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL, + 0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL, + 0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL, + 0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL, + 0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL, + 0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL, + 0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL, + 0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL, + 0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL, + 0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL, + 0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL, + 0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL, + 0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL, + 0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL, + 0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL, + 0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL, + 0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL, + 0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL, + 0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL, + 0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL, + 0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL, + 0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL, + 0xde0506f1UL + }, + { + 0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL, + 0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL, + 0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL, + 0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL, + 0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL, + 0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL, + 0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL, + 0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL, + 0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL, + 0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL, + 0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL, + 0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL, + 0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL, + 0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL, + 0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL, + 0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL, + 0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL, + 0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL, + 0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL, + 0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL, + 0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL, + 0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL, + 0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL, + 0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL, + 0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL, + 0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL, + 0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL, + 0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL, + 0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL, + 0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL, + 0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL, + 0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL, + 0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL, + 0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL, + 0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL, + 0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL, + 0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL, + 0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL, + 0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL, + 0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL, + 0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL, + 0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL, + 0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL, + 0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL, + 0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL, + 0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL, + 0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL, + 0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL, + 0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL, + 0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL, + 0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL, + 0x8def022dUL + }, + { + 0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL, + 0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL, + 0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL, + 0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL, + 0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL, + 0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL, + 0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL, + 0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL, + 0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL, + 0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL, + 0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL, + 0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL, + 0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL, + 0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL, + 0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL, + 0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL, + 0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL, + 0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL, + 0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL, + 0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL, + 0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL, + 0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL, + 0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL, + 0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL, + 0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL, + 0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL, + 0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL, + 0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL, + 0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL, + 0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL, + 0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL, + 0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL, + 0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL, + 0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL, + 0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL, + 0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL, + 0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL, + 0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL, + 0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL, + 0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL, + 0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL, + 0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL, + 0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL, + 0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL, + 0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL, + 0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL, + 0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL, + 0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL, + 0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL, + 0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL, + 0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL, + 0x72fd2493UL + }, + { + 0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL, + 0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL, + 0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL, + 0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL, + 0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL, + 0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL, + 0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL, + 0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL, + 0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL, + 0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL, + 0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL, + 0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL, + 0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL, + 0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL, + 0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL, + 0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL, + 0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL, + 0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL, + 0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL, + 0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL, + 0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL, + 0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL, + 0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL, + 0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL, + 0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL, + 0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL, + 0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL, + 0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL, + 0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL, + 0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL, + 0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL, + 0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL, + 0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL, + 0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL, + 0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL, + 0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL, + 0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL, + 0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL, + 0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL, + 0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL, + 0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL, + 0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL, + 0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL, + 0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL, + 0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL, + 0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL, + 0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL, + 0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL, + 0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL, + 0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL, + 0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL, + 0xed3498beUL + }, + { + 0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL, + 0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL, + 0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL, + 0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL, + 0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL, + 0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL, + 0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL, + 0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL, + 0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL, + 0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL, + 0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL, + 0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL, + 0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL, + 0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL, + 0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL, + 0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL, + 0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL, + 0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL, + 0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL, + 0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL, + 0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL, + 0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL, + 0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL, + 0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL, + 0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL, + 0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL, + 0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL, + 0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL, + 0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL, + 0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL, + 0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL, + 0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL, + 0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL, + 0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL, + 0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL, + 0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL, + 0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL, + 0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL, + 0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL, + 0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL, + 0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL, + 0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL, + 0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL, + 0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL, + 0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL, + 0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL, + 0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL, + 0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL, + 0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL, + 0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL, + 0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL, + 0xf10605deUL +#endif } }; diff --git a/deps/zlib-1.2.11/doc/algorithm.txt b/deps/zlib-1.2.11/doc/algorithm.txt new file mode 100755 index 0000000..c97f495 --- /dev/null +++ b/deps/zlib-1.2.11/doc/algorithm.txt @@ -0,0 +1,209 @@ +1. Compression algorithm (deflate) + +The deflation algorithm used by gzip (also zip and zlib) is a variation of +LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in +the input data. The second occurrence of a string is replaced by a +pointer to the previous string, in the form of a pair (distance, +length). Distances are limited to 32K bytes, and lengths are limited +to 258 bytes. When a string does not occur anywhere in the previous +32K bytes, it is emitted as a sequence of literal bytes. (In this +description, `string' must be taken as an arbitrary sequence of bytes, +and is not restricted to printable characters.) + +Literals or match lengths are compressed with one Huffman tree, and +match distances are compressed with another tree. The trees are stored +in a compact form at the start of each block. The blocks can have any +size (except that the compressed data for one block must fit in +available memory). A block is terminated when deflate() determines that +it would be useful to start another block with fresh trees. (This is +somewhat similar to the behavior of LZW-based _compress_.) + +Duplicated strings are found using a hash table. All input strings of +length 3 are inserted in the hash table. A hash index is computed for +the next 3 bytes. If the hash chain for this index is not empty, all +strings in the chain are compared with the current input string, and +the longest match is selected. + +The hash chains are searched starting with the most recent strings, to +favor small distances and thus take advantage of the Huffman encoding. +The hash chains are singly linked. There are no deletions from the +hash chains, the algorithm simply discards matches that are too old. + +To avoid a worst-case situation, very long hash chains are arbitrarily +truncated at a certain length, determined by a runtime option (level +parameter of deflateInit). So deflate() does not always find the longest +possible match but generally finds a match which is long enough. + +deflate() also defers the selection of matches with a lazy evaluation +mechanism. After a match of length N has been found, deflate() searches for +a longer match at the next input byte. If a longer match is found, the +previous match is truncated to a length of one (thus producing a single +literal byte) and the process of lazy evaluation begins again. Otherwise, +the original match is kept, and the next match search is attempted only N +steps later. + +The lazy match evaluation is also subject to a runtime parameter. If +the current match is long enough, deflate() reduces the search for a longer +match, thus speeding up the whole process. If compression ratio is more +important than speed, deflate() attempts a complete second search even if +the first match is already long enough. + +The lazy match evaluation is not performed for the fastest compression +modes (level parameter 1 to 3). For these fast modes, new strings +are inserted in the hash table only when no match was found, or +when the match is not too long. This degrades the compression ratio +but saves time since there are both fewer insertions and fewer searches. + + +2. Decompression algorithm (inflate) + +2.1 Introduction + +The key question is how to represent a Huffman code (or any prefix code) so +that you can decode fast. The most important characteristic is that shorter +codes are much more common than longer codes, so pay attention to decoding the +short codes fast, and let the long codes take longer to decode. + +inflate() sets up a first level table that covers some number of bits of +input less than the length of longest code. It gets that many bits from the +stream, and looks it up in the table. The table will tell if the next +code is that many bits or less and how many, and if it is, it will tell +the value, else it will point to the next level table for which inflate() +grabs more bits and tries to decode a longer code. + +How many bits to make the first lookup is a tradeoff between the time it +takes to decode and the time it takes to build the table. If building the +table took no time (and if you had infinite memory), then there would only +be a first level table to cover all the way to the longest code. However, +building the table ends up taking a lot longer for more bits since short +codes are replicated many times in such a table. What inflate() does is +simply to make the number of bits in the first table a variable, and then +to set that variable for the maximum speed. + +For inflate, which has 286 possible codes for the literal/length tree, the size +of the first table is nine bits. Also the distance trees have 30 possible +values, and the size of the first table is six bits. Note that for each of +those cases, the table ended up one bit longer than the ``average'' code +length, i.e. the code length of an approximately flat code which would be a +little more than eight bits for 286 symbols and a little less than five bits +for 30 symbols. + + +2.2 More details on the inflate table lookup + +Ok, you want to know what this cleverly obfuscated inflate tree actually +looks like. You are correct that it's not a Huffman tree. It is simply a +lookup table for the first, let's say, nine bits of a Huffman symbol. The +symbol could be as short as one bit or as long as 15 bits. If a particular +symbol is shorter than nine bits, then that symbol's translation is duplicated +in all those entries that start with that symbol's bits. For example, if the +symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a +symbol is nine bits long, it appears in the table once. + +If the symbol is longer than nine bits, then that entry in the table points +to another similar table for the remaining bits. Again, there are duplicated +entries as needed. The idea is that most of the time the symbol will be short +and there will only be one table look up. (That's whole idea behind data +compression in the first place.) For the less frequent long symbols, there +will be two lookups. If you had a compression method with really long +symbols, you could have as many levels of lookups as is efficient. For +inflate, two is enough. + +So a table entry either points to another table (in which case nine bits in +the above example are gobbled), or it contains the translation for the symbol +and the number of bits to gobble. Then you start again with the next +ungobbled bit. + +You may wonder: why not just have one lookup table for how ever many bits the +longest symbol is? The reason is that if you do that, you end up spending +more time filling in duplicate symbol entries than you do actually decoding. +At least for deflate's output that generates new trees every several 10's of +kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code +would take too long if you're only decoding several thousand symbols. At the +other extreme, you could make a new table for every bit in the code. In fact, +that's essentially a Huffman tree. But then you spend too much time +traversing the tree while decoding, even for short symbols. + +So the number of bits for the first lookup table is a trade of the time to +fill out the table vs. the time spent looking at the second level and above of +the table. + +Here is an example, scaled down: + +The code being decoded, with 10 symbols, from 1 to 6 bits long: + +A: 0 +B: 10 +C: 1100 +D: 11010 +E: 11011 +F: 11100 +G: 11101 +H: 11110 +I: 111110 +J: 111111 + +Let's make the first table three bits long (eight entries): + +000: A,1 +001: A,1 +010: A,1 +011: A,1 +100: B,2 +101: B,2 +110: -> table X (gobble 3 bits) +111: -> table Y (gobble 3 bits) + +Each entry is what the bits decode as and how many bits that is, i.e. how +many bits to gobble. Or the entry points to another table, with the number of +bits to gobble implicit in the size of the table. + +Table X is two bits long since the longest code starting with 110 is five bits +long: + +00: C,1 +01: C,1 +10: D,2 +11: E,2 + +Table Y is three bits long since the longest code starting with 111 is six +bits long: + +000: F,2 +001: F,2 +010: G,2 +011: G,2 +100: H,2 +101: H,2 +110: I,3 +111: J,3 + +So what we have here are three tables with a total of 20 entries that had to +be constructed. That's compared to 64 entries for a single table. Or +compared to 16 entries for a Huffman tree (six two entry tables and one four +entry table). Assuming that the code ideally represents the probability of +the symbols, it takes on the average 1.25 lookups per symbol. That's compared +to one lookup for the single table, or 1.66 lookups per symbol for the +Huffman tree. + +There, I think that gives you a picture of what's going on. For inflate, the +meaning of a particular symbol is often more than just a letter. It can be a +byte (a "literal"), or it can be either a length or a distance which +indicates a base value and a number of bits to fetch after the code that is +added to the base value. Or it might be the special end-of-block code. The +data structures created in inftrees.c try to encode all that information +compactly in the tables. + + +Jean-loup Gailly Mark Adler +jloup@gzip.org madler@alumni.caltech.edu + + +References: + +[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data +Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3, +pp. 337-343. + +``DEFLATE Compressed Data Format Specification'' available in +http://tools.ietf.org/html/rfc1951 diff --git a/deps/zlib-1.2.11/doc/rfc1950.txt b/deps/zlib-1.2.11/doc/rfc1950.txt new file mode 100755 index 0000000..ce6428a --- /dev/null +++ b/deps/zlib-1.2.11/doc/rfc1950.txt @@ -0,0 +1,619 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1950 Aladdin Enterprises +Category: Informational J-L. Gailly + Info-ZIP + May 1996 + + + ZLIB Compressed Data Format Specification version 3.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format. The + data can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a priori + bounded amount of intermediate storage. The format presently uses + the DEFLATE compression method but can be easily extended to use + other compression methods. It can be implemented readily in a manner + not covered by patents. This specification also defines the ADLER-32 + checksum (an extension and improvement of the Fletcher checksum), + used for detection of data corruption, and provides an algorithm for + computing it. + + + + +Deutsch & Gailly Informational [Page 1] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 3 + 2.1. Overall conventions ....................................... 3 + 2.2. Data format ............................................... 4 + 2.3. Compliance ................................................ 7 + 3. References ..................................................... 7 + 4. Source code .................................................... 8 + 5. Security Considerations ........................................ 8 + 6. Acknowledgements ............................................... 8 + 7. Authors' Addresses ............................................. 8 + 8. Appendix: Rationale ............................................ 9 + 9. Appendix: Sample code ..........................................10 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence can + be used in data communications or similar structures such as + Unix filters; + + * Can use a number of different compression methods; + + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely. + + The data format defined by this specification does not attempt to + allow random access to compressed data. + + + + + + + +Deutsch & Gailly Informational [Page 2] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into zlib format and/or decompress data from zlib + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compressed data format that can be + used for in-memory compression of a sequence of arbitrary bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below, for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + Version 3.1 was the first public release of this specification. + In version 3.2, some terminology was changed and the Adler-32 + sample code was rewritten for clarity. In version 3.3, the + support for a preset dictionary was introduced, and the + specification was converted to RFC style. + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + + + +Deutsch & Gailly Informational [Page 3] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the MOST-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00000010|00001000| + +--------+--------+ + ^ ^ + | | + | + less significant byte = 8 + + more significant byte = 2 x 256 + + 2.2. Data format + + A zlib stream has the following structure: + + 0 1 + +---+---+ + |CMF|FLG| (more-->) + +---+---+ + + + + + + + + +Deutsch & Gailly Informational [Page 4] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + (if FLG.FDICT set) + + 0 1 2 3 + +---+---+---+---+ + | DICTID | (more-->) + +---+---+---+---+ + + +=====================+---+---+---+---+ + |...compressed data...| ADLER32 | + +=====================+---+---+---+---+ + + Any data which may appear after ADLER32 are not part of the zlib + stream. + + CMF (Compression Method and flags) + This byte is divided into a 4-bit compression method and a 4- + bit information field depending on the compression method. + + bits 0 to 3 CM Compression method + bits 4 to 7 CINFO Compression info + + CM (Compression method) + This identifies the compression method used in the file. CM = 8 + denotes the "deflate" compression method with a window size up + to 32K. This is the method used by gzip and PNG (see + references [1] and [2] in Chapter 3, below, for the reference + documents). CM = 15 is reserved. It might be used in a future + version of this specification to indicate the presence of an + extra field before the compressed data. + + CINFO (Compression info) + For CM = 8, CINFO is the base-2 logarithm of the LZ77 window + size, minus eight (CINFO=7 indicates a 32K window size). Values + of CINFO above 7 are not allowed in this version of the + specification. CINFO is not defined in this specification for + CM not equal to 8. + + FLG (FLaGs) + This flag byte is divided as follows: + + bits 0 to 4 FCHECK (check bits for CMF and FLG) + bit 5 FDICT (preset dictionary) + bits 6 to 7 FLEVEL (compression level) + + The FCHECK value must be such that CMF and FLG, when viewed as + a 16-bit unsigned integer stored in MSB order (CMF*256 + FLG), + is a multiple of 31. + + + + +Deutsch & Gailly Informational [Page 5] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + FDICT (Preset dictionary) + If FDICT is set, a DICT dictionary identifier is present + immediately after the FLG byte. The dictionary is a sequence of + bytes which are initially fed to the compressor without + producing any compressed output. DICT is the Adler-32 checksum + of this sequence of bytes (see the definition of ADLER32 + below). The decompressor can use this identifier to determine + which dictionary has been used by the compressor. + + FLEVEL (Compression level) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + 0 - compressor used fastest algorithm + 1 - compressor used fast algorithm + 2 - compressor used default algorithm + 3 - compressor used maximum compression, slowest algorithm + + The information in FLEVEL is not needed for decompression; it + is there to indicate if recompression might be worthwhile. + + compressed data + For compression method 8, the compressed data is stored in the + deflate compressed data format as described in the document + "DEFLATE Compressed Data Format Specification" by L. Peter + Deutsch. (See reference [3] in Chapter 3, below) + + Other compressed data formats are not specified in this version + of the zlib specification. + + ADLER32 (Adler-32 checksum) + This contains a checksum value of the uncompressed data + (excluding any dictionary data) computed according to Adler-32 + algorithm. This algorithm is a 32-bit extension and improvement + of the Fletcher algorithm, used in the ITU-T X.224 / ISO 8073 + standard. See references [4] and [5] in Chapter 3, below) + + Adler-32 is composed of two sums accumulated per byte: s1 is + the sum of all bytes, s2 is the sum of all s1 values. Both sums + are done modulo 65521. s1 is initialized to 1, s2 to zero. The + Adler-32 checksum is stored as s2*65536 + s1 in most- + significant-byte first (network) order. + + + + + + + + +Deutsch & Gailly Informational [Page 6] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + 2.3. Compliance + + A compliant compressor must produce streams with correct CMF, FLG + and ADLER32, but need not support preset dictionaries. When the + zlib data format is used as part of another standard data format, + the compressor may use only preset dictionaries that are specified + by this other data format. If this other format does not use the + preset dictionary feature, the compressor must not set the FDICT + flag. + + A compliant decompressor must check CMF, FLG, and ADLER32, and + provide an error indication if any of these have incorrect values. + A compliant decompressor must give an error indication if CM is + not one of the values defined in this specification (only the + value 8 is permitted in this version), since another value could + indicate the presence of new features that would cause subsequent + data to be interpreted incorrectly. A compliant decompressor must + give an error indication if FDICT is set and DICTID is not the + identifier of a known preset dictionary. A decompressor may + ignore FLEVEL and still be compliant. When the zlib data format + is being used as a part of another standard format, a compliant + decompressor must support all the preset dictionaries specified by + the other format. When the other format does not use the preset + dictionary feature, a compliant decompressor must reject any + stream in which the FDICT flag is set. + +3. References + + [1] Deutsch, L.P.,"GZIP Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [2] Thomas Boutell, "PNG (Portable Network Graphics) specification", + available in ftp://ftp.uu.net/graphics/png/documents/ + + [3] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Fletcher, J. G., "An Arithmetic Checksum for Serial + Transmissions," IEEE Transactions on Communications, Vol. COM-30, + No. 1, January 1982, pp. 247-252. + + [5] ITU-T Recommendation X.224, Annex D, "Checksum Algorithms," + November, 1993, pp. 144, 145. (Available from + gopher://info.itu.ch). ITU-T X.244 is also the same as ISO 8073. + + + + + + + +Deutsch & Gailly Informational [Page 7] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +4. Source code + + Source code for a C language implementation of a "zlib" compliant + library is available at ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +5. Security Considerations + + A decoder that fails to check the ADLER32 checksum value may be + subject to undetected data corruption. + +6. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly and Mark Adler designed the zlib format and wrote + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +7. Authors' Addresses + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + + Jean-Loup Gailly + + EMail: + + Questions about the technical content of this specification can be + sent by email to + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + +Deutsch & Gailly Informational [Page 8] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +8. Appendix: Rationale + + 8.1. Preset dictionaries + + A preset dictionary is specially useful to compress short input + sequences. The compressor can take advantage of the dictionary + context to encode the input in a more compact manner. The + decompressor can be initialized with the appropriate context by + virtually decompressing a compressed version of the dictionary + without producing any output. However for certain compression + algorithms such as the deflate algorithm this operation can be + achieved without actually performing any decompression. + + The compressor and the decompressor must use exactly the same + dictionary. The dictionary may be fixed or may be chosen among a + certain number of predefined dictionaries, according to the kind + of input data. The decompressor can determine which dictionary has + been chosen by the compressor by checking the dictionary + identifier. This document does not specify the contents of + predefined dictionaries, since the optimal dictionaries are + application specific. Standard data formats using this feature of + the zlib specification must precisely define the allowed + dictionaries. + + 8.2. The Adler-32 algorithm + + The Adler-32 algorithm is much faster than the CRC32 algorithm yet + still provides an extremely low probability of undetected errors. + + The modulo on unsigned long accumulators can be delayed for 5552 + bytes, so the modulo operation time is negligible. If the bytes + are a, b, c, the second sum is 3a + 2b + c + 3, and so is position + and order sensitive, unlike the first sum, which is just a + checksum. That 65521 is prime is important to avoid a possible + large class of two-byte errors that leave the check unchanged. + (The Fletcher checksum uses 255, which is not prime and which also + makes the Fletcher check insensitive to single byte changes 0 <-> + 255.) + + The sum s1 is initialized to 1 instead of zero to make the length + of the sequence part of s2, so that the length does not have to be + checked separately. (Any sequence of zeroes has a Fletcher + checksum of zero.) + + + + + + + + +Deutsch & Gailly Informational [Page 9] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + +9. Appendix: Sample code + + The following C code computes the Adler-32 checksum of a data buffer. + It is written for clarity, not for speed. The sample code is in the + ANSI C programming language. Non C users may find it easier to read + with these hints: + + & Bitwise AND operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero bit(s) + at the left. + << Bitwise left shift operator. Left shift inserts zero + bit(s) at the right. + ++ "n++" increments the variable n. + % modulo operator: a % b is the remainder of a divided by b. + + #define BASE 65521 /* largest prime smaller than 65536 */ + + /* + Update a running Adler-32 checksum with the bytes buf[0..len-1] + and return the updated checksum. The Adler-32 checksum should be + initialized to 1. + + Usage example: + + unsigned long adler = 1L; + + while (read_buffer(buffer, length) != EOF) { + adler = update_adler32(adler, buffer, length); + } + if (adler != original_adler) error(); + */ + unsigned long update_adler32(unsigned long adler, + unsigned char *buf, int len) + { + unsigned long s1 = adler & 0xffff; + unsigned long s2 = (adler >> 16) & 0xffff; + int n; + + for (n = 0; n < len; n++) { + s1 = (s1 + buf[n]) % BASE; + s2 = (s2 + s1) % BASE; + } + return (s2 << 16) + s1; + } + + /* Return the adler32 of the bytes buf[0..len-1] */ + + + + +Deutsch & Gailly Informational [Page 10] + +RFC 1950 ZLIB Compressed Data Format Specification May 1996 + + + unsigned long adler32(unsigned char *buf, int len) + { + return update_adler32(1L, buf, len); + } + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch & Gailly Informational [Page 11] + diff --git a/deps/zlib-1.2.11/doc/rfc1951.txt b/deps/zlib-1.2.11/doc/rfc1951.txt new file mode 100755 index 0000000..403c8c7 --- /dev/null +++ b/deps/zlib-1.2.11/doc/rfc1951.txt @@ -0,0 +1,955 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1951 Aladdin Enterprises +Category: Informational May 1996 + + + DEFLATE Compressed Data Format Specification version 1.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that + compresses data using a combination of the LZ77 algorithm and Huffman + coding, with efficiency comparable to the best currently available + general-purpose compression methods. The data can be produced or + consumed, even for an arbitrarily long sequentially presented input + data stream, using only an a priori bounded amount of intermediate + storage. The format can be implemented readily in a manner not + covered by patents. + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................ 3 + 1.6. Changes from previous versions ............................ 4 + 2. Compressed representation overview ............................. 4 + 3. Detailed specification ......................................... 5 + 3.1. Overall conventions ....................................... 5 + 3.1.1. Packing into bytes .................................. 5 + 3.2. Compressed block format ................................... 6 + 3.2.1. Synopsis of prefix and Huffman coding ............... 6 + 3.2.2. Use of Huffman coding in the "deflate" format ....... 7 + 3.2.3. Details of block format ............................. 9 + 3.2.4. Non-compressed blocks (BTYPE=00) ................... 11 + 3.2.5. Compressed blocks (length and distance codes) ...... 11 + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) .... 12 + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) .. 13 + 3.3. Compliance ............................................... 14 + 4. Compression algorithm details ................................. 14 + 5. References .................................................... 16 + 6. Security Considerations ....................................... 16 + 7. Source code ................................................... 16 + 8. Acknowledgements .............................................. 16 + 9. Author's Address .............................................. 17 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can be produced or consumed, even for an arbitrarily long + sequentially presented input data stream, using only an a + priori bounded amount of intermediate storage, and hence + can be used in data communications or similar structures + such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + + + +Deutsch Informational [Page 2] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + The data format defined by this specification does not attempt to: + + * Allow random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well + as the best currently available specialized algorithms. + + A simple counting argument shows that no lossless compression + algorithm can compress every possible input data set. For the + format defined here, the worst case expansion is 5 bytes per 32K- + byte block, i.e., a size increase of 0.015% for large data sets. + English text usually compresses by a factor of 2.5 to 3; + executable files usually compress somewhat less; graphical data + such as raster images may compress much more. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into "deflate" format and/or decompress data from + "deflate" format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. Familiarity with the technique of Huffman coding + is helpful but not required. + + 1.3. Scope + + The specification specifies a method for representing a sequence + of bytes as a (usually shorter) sequence of bits, and a method for + packing the latter bit sequence into bytes. + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any data set that conforms to all + the specifications presented here; a compliant compressor must + produce data sets that conform to all the specifications presented + here. + + 1.5. Definitions of terms and conventions used + + Byte: 8 bits stored or transmitted as a unit (same as an octet). + For this specification, a byte is exactly 8 bits, even on machines + + + +Deutsch Informational [Page 3] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + which store a character on a number of bits different from eight. + See below, for the numbering of bits within a byte. + + String: a sequence of arbitrary bytes. + + 1.6. Changes from previous versions + + There have been no technical changes to the deflate format since + version 1.1 of this specification. In version 1.2, some + terminology was changed. Version 1.3 is a conversion of the + specification to RFC style. + +2. Compressed representation overview + + A compressed data set consists of a series of blocks, corresponding + to successive blocks of input data. The block sizes are arbitrary, + except that non-compressible blocks are limited to 65,535 bytes. + + Each block is compressed using a combination of the LZ77 algorithm + and Huffman coding. The Huffman trees for each block are independent + of those for previous or subsequent blocks; the LZ77 algorithm may + use a reference to a duplicated string occurring in a previous block, + up to 32K input bytes before. + + Each block consists of two parts: a pair of Huffman code trees that + describe the representation of the compressed data part, and a + compressed data part. (The Huffman trees themselves are compressed + using Huffman encoding.) The compressed data consists of a series of + elements of two types: literal bytes (of strings that have not been + detected as duplicated within the previous 32K input bytes), and + pointers to duplicated strings, where a pointer is represented as a + pair . The representation used in the + "deflate" format limits distances to 32K bytes and lengths to 258 + bytes, but does not limit the size of a block, except for + uncompressible blocks, which are limited as noted above. + + Each type of value (literals, distances, and lengths) in the + compressed data is represented using a Huffman code, using one code + tree for literals and lengths and a separate code tree for distances. + The code trees for each block appear in a compact form just before + the compressed data for that block. + + + + + + + + + + +Deutsch Informational [Page 4] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +3. Detailed specification + + 3.1. Overall conventions In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + 3.1.1. Packing into bytes + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, + since the final data format described here is byte- rather than + + + +Deutsch Informational [Page 5] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + bit-oriented. However, we describe the compressed block format + in below, as a sequence of data elements of various bit + lengths, not a sequence of bytes. We must therefore specify + how to pack these data elements into bytes to form the final + compressed byte sequence: + + * Data elements are packed into bytes in order of + increasing bit number within the byte, i.e., starting + with the least-significant bit of the byte. + * Data elements other than Huffman codes are packed + starting with the least-significant bit of the data + element. + * Huffman codes are packed starting with the most- + significant bit of the code. + + In other words, if one were to print out the compressed data as + a sequence of bytes, starting with the first byte at the + *right* margin and proceeding to the *left*, with the most- + significant bit of each byte on the left as usual, one would be + able to parse the result from right to left, with fixed-width + elements in the correct MSB-to-LSB order and Huffman codes in + bit-reversed order (i.e., with the first bit of the code in the + relative LSB position). + + 3.2. Compressed block format + + 3.2.1. Synopsis of prefix and Huffman coding + + Prefix coding represents symbols from an a priori known + alphabet by bit sequences (codes), one code for each symbol, in + a manner such that different symbols may be represented by bit + sequences of different lengths, but a parser can always parse + an encoded string unambiguously symbol-by-symbol. + + We define a prefix code in terms of a binary tree in which the + two edges descending from each non-leaf node are labeled 0 and + 1 and in which the leaf nodes correspond one-for-one with (are + labeled with) the symbols of the alphabet; then the code for a + symbol is the sequence of 0's and 1's on the edges leading from + the root to the leaf labeled with that symbol. For example: + + + + + + + + + + + +Deutsch Informational [Page 6] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + /\ Symbol Code + 0 1 ------ ---- + / \ A 00 + /\ B B 1 + 0 1 C 011 + / \ D 010 + A /\ + 0 1 + / \ + D C + + A parser can decode the next symbol from an encoded input + stream by walking down the tree from the root, at each step + choosing the edge corresponding to the next input bit. + + Given an alphabet with known symbol frequencies, the Huffman + algorithm allows the construction of an optimal prefix code + (one which represents strings with those symbol frequencies + using the fewest bits of any possible prefix codes for that + alphabet). Such a code is called a Huffman code. (See + reference [1] in Chapter 5, references for additional + information on Huffman codes.) + + Note that in the "deflate" format, the Huffman codes for the + various alphabets must not exceed certain maximum code lengths. + This constraint complicates the algorithm for computing code + lengths from symbol frequencies. Again, see Chapter 5, + references for details. + + 3.2.2. Use of Huffman coding in the "deflate" format + + The Huffman codes used for each alphabet in the "deflate" + format have two additional rules: + + * All codes of a given bit length have lexicographically + consecutive values, in the same order as the symbols + they represent; + + * Shorter codes lexicographically precede longer codes. + + + + + + + + + + + + +Deutsch Informational [Page 7] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + We could recode the example above to follow this rule as + follows, assuming that the order of the alphabet is ABCD: + + Symbol Code + ------ ---- + A 10 + B 0 + C 110 + D 111 + + I.e., 0 precedes 10 which precedes 11x, and 110 and 111 are + lexicographically consecutive. + + Given this rule, we can define the Huffman code for an alphabet + just by giving the bit lengths of the codes for each symbol of + the alphabet in order; this is sufficient to determine the + actual codes. In our example, the code is completely defined + by the sequence of bit lengths (2, 1, 3, 3). The following + algorithm generates the codes as integers, intended to be read + from most- to least-significant bit. The code lengths are + initially in tree[I].Len; the codes are produced in + tree[I].Code. + + 1) Count the number of codes for each code length. Let + bl_count[N] be the number of codes of length N, N >= 1. + + 2) Find the numerical value of the smallest code for each + code length: + + code = 0; + bl_count[0] = 0; + for (bits = 1; bits <= MAX_BITS; bits++) { + code = (code + bl_count[bits-1]) << 1; + next_code[bits] = code; + } + + 3) Assign numerical values to all codes, using consecutive + values for all codes of the same length with the base + values determined at step 2. Codes that are never used + (which have a bit length of zero) must not be assigned a + value. + + for (n = 0; n <= max_code; n++) { + len = tree[n].Len; + if (len != 0) { + tree[n].Code = next_code[len]; + next_code[len]++; + } + + + +Deutsch Informational [Page 8] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + } + + Example: + + Consider the alphabet ABCDEFGH, with bit lengths (3, 3, 3, 3, + 3, 2, 4, 4). After step 1, we have: + + N bl_count[N] + - ----------- + 2 1 + 3 5 + 4 2 + + Step 2 computes the following next_code values: + + N next_code[N] + - ------------ + 1 0 + 2 0 + 3 2 + 4 14 + + Step 3 produces the following code values: + + Symbol Length Code + ------ ------ ---- + A 3 010 + B 3 011 + C 3 100 + D 3 101 + E 3 110 + F 2 00 + G 4 1110 + H 4 1111 + + 3.2.3. Details of block format + + Each block of compressed data begins with 3 header bits + containing the following data: + + first bit BFINAL + next 2 bits BTYPE + + Note that the header bits do not necessarily begin on a byte + boundary, since a block does not necessarily occupy an integral + number of bytes. + + + + + +Deutsch Informational [Page 9] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + BFINAL is set if and only if this is the last block of the data + set. + + BTYPE specifies how the data are compressed, as follows: + + 00 - no compression + 01 - compressed with fixed Huffman codes + 10 - compressed with dynamic Huffman codes + 11 - reserved (error) + + The only difference between the two compressed cases is how the + Huffman codes for the literal/length and distance alphabets are + defined. + + In all cases, the decoding algorithm for the actual data is as + follows: + + do + read block header from input stream. + if stored with no compression + skip any remaining bits in current partially + processed byte + read LEN and NLEN (see next section) + copy LEN bytes of data to output + otherwise + if compressed with dynamic Huffman codes + read representation of code trees (see + subsection below) + loop (until end of block code recognized) + decode literal/length value from input stream + if value < 256 + copy value (literal byte) to output stream + otherwise + if value = end of block (256) + break from loop + otherwise (value = 257..285) + decode distance from input stream + + move backwards distance bytes in the output + stream, and copy length bytes from this + position to the output stream. + end loop + while not last block + + Note that a duplicated string reference may refer to a string + in a previous block; i.e., the backward distance may cross one + or more block boundaries. However a distance cannot refer past + the beginning of the output stream. (An application using a + + + +Deutsch Informational [Page 10] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + preset dictionary might discard part of the output stream; a + distance can refer to that part of the output stream anyway) + Note also that the referenced string may overlap the current + position; for example, if the last 2 bytes decoded have values + X and Y, a string reference with + adds X,Y,X,Y,X to the output stream. + + We now specify each compression method in turn. + + 3.2.4. Non-compressed blocks (BTYPE=00) + + Any bits of input up to the next byte boundary are ignored. + The rest of the block consists of the following information: + + 0 1 2 3 4... + +---+---+---+---+================================+ + | LEN | NLEN |... LEN bytes of literal data...| + +---+---+---+---+================================+ + + LEN is the number of data bytes in the block. NLEN is the + one's complement of LEN. + + 3.2.5. Compressed blocks (length and distance codes) + + As noted above, encoded data blocks in the "deflate" format + consist of sequences of symbols drawn from three conceptually + distinct alphabets: either literal bytes, from the alphabet of + byte values (0..255), or pairs, + where the length is drawn from (3..258) and the distance is + drawn from (1..32,768). In fact, the literal and length + alphabets are merged into a single alphabet (0..285), where + values 0..255 represent literal bytes, the value 256 indicates + end-of-block, and values 257..285 represent length codes + (possibly in conjunction with extra bits following the symbol + code) as follows: + + + + + + + + + + + + + + + + +Deutsch Informational [Page 11] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + Extra Extra Extra + Code Bits Length(s) Code Bits Lengths Code Bits Length(s) + ---- ---- ------ ---- ---- ------- ---- ---- ------- + 257 0 3 267 1 15,16 277 4 67-82 + 258 0 4 268 1 17,18 278 4 83-98 + 259 0 5 269 2 19-22 279 4 99-114 + 260 0 6 270 2 23-26 280 4 115-130 + 261 0 7 271 2 27-30 281 5 131-162 + 262 0 8 272 2 31-34 282 5 163-194 + 263 0 9 273 3 35-42 283 5 195-226 + 264 0 10 274 3 43-50 284 5 227-257 + 265 1 11,12 275 3 51-58 285 0 258 + 266 1 13,14 276 3 59-66 + + The extra bits should be interpreted as a machine integer + stored with the most-significant bit first, e.g., bits 1110 + represent the value 14. + + Extra Extra Extra + Code Bits Dist Code Bits Dist Code Bits Distance + ---- ---- ---- ---- ---- ------ ---- ---- -------- + 0 0 1 10 4 33-48 20 9 1025-1536 + 1 0 2 11 4 49-64 21 9 1537-2048 + 2 0 3 12 5 65-96 22 10 2049-3072 + 3 0 4 13 5 97-128 23 10 3073-4096 + 4 1 5,6 14 6 129-192 24 11 4097-6144 + 5 1 7,8 15 6 193-256 25 11 6145-8192 + 6 2 9-12 16 7 257-384 26 12 8193-12288 + 7 2 13-16 17 7 385-512 27 12 12289-16384 + 8 3 17-24 18 8 513-768 28 13 16385-24576 + 9 3 25-32 19 8 769-1024 29 13 24577-32768 + + 3.2.6. Compression with fixed Huffman codes (BTYPE=01) + + The Huffman codes for the two alphabets are fixed, and are not + represented explicitly in the data. The Huffman code lengths + for the literal/length alphabet are: + + Lit Value Bits Codes + --------- ---- ----- + 0 - 143 8 00110000 through + 10111111 + 144 - 255 9 110010000 through + 111111111 + 256 - 279 7 0000000 through + 0010111 + 280 - 287 8 11000000 through + 11000111 + + + +Deutsch Informational [Page 12] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + The code lengths are sufficient to generate the actual codes, + as described above; we show the codes in the table for added + clarity. Literal/length values 286-287 will never actually + occur in the compressed data, but participate in the code + construction. + + Distance codes 0-31 are represented by (fixed-length) 5-bit + codes, with possible additional bits as shown in the table + shown in Paragraph 3.2.5, above. Note that distance codes 30- + 31 will never actually occur in the compressed data. + + 3.2.7. Compression with dynamic Huffman codes (BTYPE=10) + + The Huffman codes for the two alphabets appear in the block + immediately after the header bits and before the actual + compressed data, first the literal/length code and then the + distance code. Each code is defined by a sequence of code + lengths, as discussed in Paragraph 3.2.2, above. For even + greater compactness, the code length sequences themselves are + compressed using a Huffman code. The alphabet for code lengths + is as follows: + + 0 - 15: Represent code lengths of 0 - 15 + 16: Copy the previous code length 3 - 6 times. + The next 2 bits indicate repeat length + (0 = 3, ... , 3 = 6) + Example: Codes 8, 16 (+2 bits 11), + 16 (+2 bits 10) will expand to + 12 code lengths of 8 (1 + 6 + 5) + 17: Repeat a code length of 0 for 3 - 10 times. + (3 bits of length) + 18: Repeat a code length of 0 for 11 - 138 times + (7 bits of length) + + A code length of 0 indicates that the corresponding symbol in + the literal/length or distance alphabet will not occur in the + block, and should not participate in the Huffman code + construction algorithm given earlier. If only one distance + code is used, it is encoded using one bit, not zero bits; in + this case there is a single code length of one, with one unused + code. One distance code of zero bits means that there are no + distance codes used at all (the data is all literals). + + We can now define the format of the block: + + 5 Bits: HLIT, # of Literal/Length codes - 257 (257 - 286) + 5 Bits: HDIST, # of Distance codes - 1 (1 - 32) + 4 Bits: HCLEN, # of Code Length codes - 4 (4 - 19) + + + +Deutsch Informational [Page 13] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + (HCLEN + 4) x 3 bits: code lengths for the code length + alphabet given just above, in the order: 16, 17, 18, + 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 + + These code lengths are interpreted as 3-bit integers + (0-7); as above, a code length of 0 means the + corresponding symbol (literal/length or distance code + length) is not used. + + HLIT + 257 code lengths for the literal/length alphabet, + encoded using the code length Huffman code + + HDIST + 1 code lengths for the distance alphabet, + encoded using the code length Huffman code + + The actual compressed data of the block, + encoded using the literal/length and distance Huffman + codes + + The literal/length symbol 256 (end of data), + encoded using the literal/length Huffman code + + The code length repeat codes can cross from HLIT + 257 to the + HDIST + 1 code lengths. In other words, all code lengths form + a single sequence of HLIT + HDIST + 258 values. + + 3.3. Compliance + + A compressor may limit further the ranges of values specified in + the previous section and still be compliant; for example, it may + limit the range of backward pointers to some value smaller than + 32K. Similarly, a compressor may limit the size of blocks so that + a compressible block fits in memory. + + A compliant decompressor must accept the full range of possible + values defined in the previous section, and must accept blocks of + arbitrary size. + +4. Compression algorithm details + + While it is the intent of this document to define the "deflate" + compressed data format without reference to any particular + compression algorithm, the format is related to the compressed + formats produced by LZ77 (Lempel-Ziv 1977, see reference [2] below); + since many variations of LZ77 are patented, it is strongly + recommended that the implementor of a compressor follow the general + algorithm presented here, which is known not to be patented per se. + The material in this section is not part of the definition of the + + + +Deutsch Informational [Page 14] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + + specification per se, and a compressor need not follow it in order to + be compliant. + + The compressor terminates a block when it determines that starting a + new block with fresh trees would be useful, or when the block size + fills up the compressor's block buffer. + + The compressor uses a chained hash table to find duplicated strings, + using a hash function that operates on 3-byte sequences. At any + given point during compression, let XYZ be the next 3 input bytes to + be examined (not necessarily all different, of course). First, the + compressor examines the hash chain for XYZ. If the chain is empty, + the compressor simply writes out X as a literal byte and advances one + byte in the input. If the hash chain is not empty, indicating that + the sequence XYZ (or, if we are unlucky, some other 3 bytes with the + same hash function value) has occurred recently, the compressor + compares all strings on the XYZ hash chain with the actual input data + sequence starting at the current point, and selects the longest + match. + + The compressor searches the hash chains starting with the most recent + strings, to favor small distances and thus take advantage of the + Huffman encoding. The hash chains are singly linked. There are no + deletions from the hash chains; the algorithm simply discards matches + that are too old. To avoid a worst-case situation, very long hash + chains are arbitrarily truncated at a certain length, determined by a + run-time parameter. + + To improve overall compression, the compressor optionally defers the + selection of matches ("lazy matching"): after a match of length N has + been found, the compressor searches for a longer match starting at + the next input byte. If it finds a longer match, it truncates the + previous match to a length of one (thus producing a single literal + byte) and then emits the longer match. Otherwise, it emits the + original match, and, as described above, advances N bytes before + continuing. + + Run-time parameters also control this "lazy match" procedure. If + compression ratio is most important, the compressor attempts a + complete second search regardless of the length of the first match. + In the normal case, if the current match is "long enough", the + compressor reduces the search for a longer match, thus speeding up + the process. If speed is most important, the compressor inserts new + strings in the hash table only when no match was found, or when the + match is not "too long". This degrades the compression ratio but + saves time since there are both fewer insertions and fewer searches. + + + + + +Deutsch Informational [Page 15] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +5. References + + [1] Huffman, D. A., "A Method for the Construction of Minimum + Redundancy Codes", Proceedings of the Institute of Radio + Engineers, September 1952, Volume 40, Number 9, pp. 1098-1101. + + [2] Ziv J., Lempel A., "A Universal Algorithm for Sequential Data + Compression", IEEE Transactions on Information Theory, Vol. 23, + No. 3, pp. 337-343. + + [3] Gailly, J.-L., and Adler, M., ZLIB documentation and sources, + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [4] Gailly, J.-L., and Adler, M., GZIP documentation and sources, + available as gzip-*.tar in ftp://prep.ai.mit.edu/pub/gnu/ + + [5] Schwartz, E. S., and Kallick, B. "Generating a canonical prefix + encoding." Comm. ACM, 7,3 (Mar. 1964), pp. 166-169. + + [6] Hirschberg and Lelewer, "Efficient decoding of prefix codes," + Comm. ACM, 33,4, April 1990, pp. 449-459. + +6. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data. See + reference [3], for example. + +7. Source code + + Source code for a C language implementation of a "deflate" compliant + compressor and decompressor is available within the zlib package at + ftp://ftp.uu.net/pub/archiving/zip/zlib/. + +8. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Phil Katz designed the deflate format. Jean-Loup Gailly and Mark + Adler wrote the related software described in this specification. + Glenn Randers-Pehrson converted this document to RFC and HTML format. + + + +Deutsch Informational [Page 16] + +RFC 1951 DEFLATE Compressed Data Format Specification May 1996 + + +9. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Deutsch Informational [Page 17] + diff --git a/deps/zlib-1.2.11/doc/rfc1952.txt b/deps/zlib-1.2.11/doc/rfc1952.txt new file mode 100755 index 0000000..a8e51b4 --- /dev/null +++ b/deps/zlib-1.2.11/doc/rfc1952.txt @@ -0,0 +1,675 @@ + + + + + + +Network Working Group P. Deutsch +Request for Comments: 1952 Aladdin Enterprises +Category: Informational May 1996 + + + GZIP file format specification version 4.3 + +Status of This Memo + + This memo provides information for the Internet community. This memo + does not specify an Internet standard of any kind. Distribution of + this memo is unlimited. + +IESG Note: + + The IESG takes no position on the validity of any Intellectual + Property Rights statements contained in this document. + +Notices + + Copyright (c) 1996 L. Peter Deutsch + + Permission is granted to copy and distribute this document for any + purpose and without charge, including translations into other + languages and incorporation into compilations, provided that the + copyright notice and this notice are preserved, and that any + substantive changes or deletions from the original are clearly + marked. + + A pointer to the latest version of this and related documentation in + HTML format can be found at the URL + . + +Abstract + + This specification defines a lossless compressed data format that is + compatible with the widely used GZIP utility. The format includes a + cyclic redundancy check value for detecting data corruption. The + format presently uses the DEFLATE method of compression but can be + easily extended to use other compression methods. The format can be + implemented readily in a manner not covered by patents. + + + + + + + + + + +Deutsch Informational [Page 1] + +RFC 1952 GZIP File Format Specification May 1996 + + +Table of Contents + + 1. Introduction ................................................... 2 + 1.1. Purpose ................................................... 2 + 1.2. Intended audience ......................................... 3 + 1.3. Scope ..................................................... 3 + 1.4. Compliance ................................................ 3 + 1.5. Definitions of terms and conventions used ................. 3 + 1.6. Changes from previous versions ............................ 3 + 2. Detailed specification ......................................... 4 + 2.1. Overall conventions ....................................... 4 + 2.2. File format ............................................... 5 + 2.3. Member format ............................................. 5 + 2.3.1. Member header and trailer ........................... 6 + 2.3.1.1. Extra field ................................... 8 + 2.3.1.2. Compliance .................................... 9 + 3. References .................................................. 9 + 4. Security Considerations .................................... 10 + 5. Acknowledgements ........................................... 10 + 6. Author's Address ........................................... 10 + 7. Appendix: Jean-Loup Gailly's gzip utility .................. 11 + 8. Appendix: Sample CRC Code .................................. 11 + +1. Introduction + + 1.1. Purpose + + The purpose of this specification is to define a lossless + compressed data format that: + + * Is independent of CPU type, operating system, file system, + and character set, and hence can be used for interchange; + * Can compress or decompress a data stream (as opposed to a + randomly accessible file) to produce another data stream, + using only an a priori bounded amount of intermediate + storage, and hence can be used in data communications or + similar structures such as Unix filters; + * Compresses data with efficiency comparable to the best + currently available general-purpose compression methods, + and in particular considerably better than the "compress" + program; + * Can be implemented readily in a manner not covered by + patents, and hence can be practiced freely; + * Is compatible with the file format produced by the current + widely used gzip utility, in that conforming decompressors + will be able to read data produced by the existing gzip + compressor. + + + + +Deutsch Informational [Page 2] + +RFC 1952 GZIP File Format Specification May 1996 + + + The data format defined by this specification does not attempt to: + + * Provide random access to compressed data; + * Compress specialized data (e.g., raster graphics) as well as + the best currently available specialized algorithms. + + 1.2. Intended audience + + This specification is intended for use by implementors of software + to compress data into gzip format and/or decompress data from gzip + format. + + The text of the specification assumes a basic background in + programming at the level of bits and other primitive data + representations. + + 1.3. Scope + + The specification specifies a compression method and a file format + (the latter assuming only that a file can store a sequence of + arbitrary bytes). It does not specify any particular interface to + a file system or anything about character sets or encodings + (except for file names and comments, which are optional). + + 1.4. Compliance + + Unless otherwise indicated below, a compliant decompressor must be + able to accept and decompress any file that conforms to all the + specifications presented here; a compliant compressor must produce + files that conform to all the specifications presented here. The + material in the appendices is not part of the specification per se + and is not relevant to compliance. + + 1.5. Definitions of terms and conventions used + + byte: 8 bits stored or transmitted as a unit (same as an octet). + (For this specification, a byte is exactly 8 bits, even on + machines which store a character on a number of bits different + from 8.) See below for the numbering of bits within a byte. + + 1.6. Changes from previous versions + + There have been no technical changes to the gzip format since + version 4.1 of this specification. In version 4.2, some + terminology was changed, and the sample CRC code was rewritten for + clarity and to eliminate the requirement for the caller to do pre- + and post-conditioning. Version 4.3 is a conversion of the + specification to RFC style. + + + +Deutsch Informational [Page 3] + +RFC 1952 GZIP File Format Specification May 1996 + + +2. Detailed specification + + 2.1. Overall conventions + + In the diagrams below, a box like this: + + +---+ + | | <-- the vertical bars might be missing + +---+ + + represents one byte; a box like this: + + +==============+ + | | + +==============+ + + represents a variable number of bytes. + + Bytes stored within a computer do not have a "bit order", since + they are always treated as a unit. However, a byte considered as + an integer between 0 and 255 does have a most- and least- + significant bit, and since we write numbers with the most- + significant digit on the left, we also write bytes with the most- + significant bit on the left. In the diagrams below, we number the + bits of a byte so that bit 0 is the least-significant bit, i.e., + the bits are numbered: + + +--------+ + |76543210| + +--------+ + + This document does not address the issue of the order in which + bits of a byte are transmitted on a bit-sequential medium, since + the data format described here is byte- rather than bit-oriented. + + Within a computer, a number may occupy multiple bytes. All + multi-byte numbers in the format described here are stored with + the least-significant byte first (at the lower memory address). + For example, the decimal number 520 is stored as: + + 0 1 + +--------+--------+ + |00001000|00000010| + +--------+--------+ + ^ ^ + | | + | + more significant byte = 2 x 256 + + less significant byte = 8 + + + +Deutsch Informational [Page 4] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.2. File format + + A gzip file consists of a series of "members" (compressed data + sets). The format of each member is specified in the following + section. The members simply appear one after another in the file, + with no additional information before, between, or after them. + + 2.3. Member format + + Each member has the following structure: + + +---+---+---+---+---+---+---+---+---+---+ + |ID1|ID2|CM |FLG| MTIME |XFL|OS | (more-->) + +---+---+---+---+---+---+---+---+---+---+ + + (if FLG.FEXTRA set) + + +---+---+=================================+ + | XLEN |...XLEN bytes of "extra field"...| (more-->) + +---+---+=================================+ + + (if FLG.FNAME set) + + +=========================================+ + |...original file name, zero-terminated...| (more-->) + +=========================================+ + + (if FLG.FCOMMENT set) + + +===================================+ + |...file comment, zero-terminated...| (more-->) + +===================================+ + + (if FLG.FHCRC set) + + +---+---+ + | CRC16 | + +---+---+ + + +=======================+ + |...compressed blocks...| (more-->) + +=======================+ + + 0 1 2 3 4 5 6 7 + +---+---+---+---+---+---+---+---+ + | CRC32 | ISIZE | + +---+---+---+---+---+---+---+---+ + + + + +Deutsch Informational [Page 5] + +RFC 1952 GZIP File Format Specification May 1996 + + + 2.3.1. Member header and trailer + + ID1 (IDentification 1) + ID2 (IDentification 2) + These have the fixed values ID1 = 31 (0x1f, \037), ID2 = 139 + (0x8b, \213), to identify the file as being in gzip format. + + CM (Compression Method) + This identifies the compression method used in the file. CM + = 0-7 are reserved. CM = 8 denotes the "deflate" + compression method, which is the one customarily used by + gzip and which is documented elsewhere. + + FLG (FLaGs) + This flag byte is divided into individual bits as follows: + + bit 0 FTEXT + bit 1 FHCRC + bit 2 FEXTRA + bit 3 FNAME + bit 4 FCOMMENT + bit 5 reserved + bit 6 reserved + bit 7 reserved + + If FTEXT is set, the file is probably ASCII text. This is + an optional indication, which the compressor may set by + checking a small amount of the input data to see whether any + non-ASCII characters are present. In case of doubt, FTEXT + is cleared, indicating binary data. For systems which have + different file formats for ascii text and binary data, the + decompressor can use FTEXT to choose the appropriate format. + We deliberately do not specify the algorithm used to set + this bit, since a compressor always has the option of + leaving it cleared and a decompressor always has the option + of ignoring it and letting some other program handle issues + of data conversion. + + If FHCRC is set, a CRC16 for the gzip header is present, + immediately before the compressed data. The CRC16 consists + of the two least significant bytes of the CRC32 for all + bytes of the gzip header up to and not including the CRC16. + [The FHCRC bit was never set by versions of gzip up to + 1.2.4, even though it was documented with a different + meaning in gzip 1.2.4.] + + If FEXTRA is set, optional extra fields are present, as + described in a following section. + + + +Deutsch Informational [Page 6] + +RFC 1952 GZIP File Format Specification May 1996 + + + If FNAME is set, an original file name is present, + terminated by a zero byte. The name must consist of ISO + 8859-1 (LATIN-1) characters; on operating systems using + EBCDIC or any other character set for file names, the name + must be translated to the ISO LATIN-1 character set. This + is the original name of the file being compressed, with any + directory components removed, and, if the file being + compressed is on a file system with case insensitive names, + forced to lower case. There is no original file name if the + data was compressed from a source other than a named file; + for example, if the source was stdin on a Unix system, there + is no file name. + + If FCOMMENT is set, a zero-terminated file comment is + present. This comment is not interpreted; it is only + intended for human consumption. The comment must consist of + ISO 8859-1 (LATIN-1) characters. Line breaks should be + denoted by a single line feed character (10 decimal). + + Reserved FLG bits must be zero. + + MTIME (Modification TIME) + This gives the most recent modification time of the original + file being compressed. The time is in Unix format, i.e., + seconds since 00:00:00 GMT, Jan. 1, 1970. (Note that this + may cause problems for MS-DOS and other systems that use + local rather than Universal time.) If the compressed data + did not come from a file, MTIME is set to the time at which + compression started. MTIME = 0 means no time stamp is + available. + + XFL (eXtra FLags) + These flags are available for use by specific compression + methods. The "deflate" method (CM = 8) sets these flags as + follows: + + XFL = 2 - compressor used maximum compression, + slowest algorithm + XFL = 4 - compressor used fastest algorithm + + OS (Operating System) + This identifies the type of file system on which compression + took place. This may be useful in determining end-of-line + convention for text files. The currently defined values are + as follows: + + + + + + +Deutsch Informational [Page 7] + +RFC 1952 GZIP File Format Specification May 1996 + + + 0 - FAT filesystem (MS-DOS, OS/2, NT/Win32) + 1 - Amiga + 2 - VMS (or OpenVMS) + 3 - Unix + 4 - VM/CMS + 5 - Atari TOS + 6 - HPFS filesystem (OS/2, NT) + 7 - Macintosh + 8 - Z-System + 9 - CP/M + 10 - TOPS-20 + 11 - NTFS filesystem (NT) + 12 - QDOS + 13 - Acorn RISCOS + 255 - unknown + + XLEN (eXtra LENgth) + If FLG.FEXTRA is set, this gives the length of the optional + extra field. See below for details. + + CRC32 (CRC-32) + This contains a Cyclic Redundancy Check value of the + uncompressed data computed according to CRC-32 algorithm + used in the ISO 3309 standard and in section 8.1.1.6.2 of + ITU-T recommendation V.42. (See http://www.iso.ch for + ordering ISO documents. See gopher://info.itu.ch for an + online version of ITU-T V.42.) + + ISIZE (Input SIZE) + This contains the size of the original (uncompressed) input + data modulo 2^32. + + 2.3.1.1. Extra field + + If the FLG.FEXTRA bit is set, an "extra field" is present in + the header, with total length XLEN bytes. It consists of a + series of subfields, each of the form: + + +---+---+---+---+==================================+ + |SI1|SI2| LEN |... LEN bytes of subfield data ...| + +---+---+---+---+==================================+ + + SI1 and SI2 provide a subfield ID, typically two ASCII letters + with some mnemonic value. Jean-Loup Gailly + is maintaining a registry of subfield + IDs; please send him any subfield ID you wish to use. Subfield + IDs with SI2 = 0 are reserved for future use. The following + IDs are currently defined: + + + +Deutsch Informational [Page 8] + +RFC 1952 GZIP File Format Specification May 1996 + + + SI1 SI2 Data + ---------- ---------- ---- + 0x41 ('A') 0x70 ('P') Apollo file type information + + LEN gives the length of the subfield data, excluding the 4 + initial bytes. + + 2.3.1.2. Compliance + + A compliant compressor must produce files with correct ID1, + ID2, CM, CRC32, and ISIZE, but may set all the other fields in + the fixed-length part of the header to default values (255 for + OS, 0 for all others). The compressor must set all reserved + bits to zero. + + A compliant decompressor must check ID1, ID2, and CM, and + provide an error indication if any of these have incorrect + values. It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC + at least so it can skip over the optional fields if they are + present. It need not examine any other part of the header or + trailer; in particular, a decompressor may ignore FTEXT and OS + and always produce binary output, and still be compliant. A + compliant decompressor must give an error indication if any + reserved bit is non-zero, since such a bit could indicate the + presence of a new field that would cause subsequent data to be + interpreted incorrectly. + +3. References + + [1] "Information Processing - 8-bit single-byte coded graphic + character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987). + The ISO 8859-1 (Latin-1) character set is a superset of 7-bit + ASCII. Files defining this character set are available as + iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/ + + [2] ISO 3309 + + [3] ITU-T recommendation V.42 + + [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification", + available in ftp://ftp.uu.net/pub/archiving/zip/doc/ + + [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in + ftp://prep.ai.mit.edu/pub/gnu/ + + [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table + Look-Up", Communications of the ACM, 31(8), pp.1008-1013. + + + + +Deutsch Informational [Page 9] + +RFC 1952 GZIP File Format Specification May 1996 + + + [7] Schwaderer, W.D., "CRC Calculation", April 85 PC Tech Journal, + pp.118-133. + + [8] ftp://ftp.adelaide.edu.au/pub/rocksoft/papers/crc_v3.txt, + describing the CRC concept. + +4. Security Considerations + + Any data compression method involves the reduction of redundancy in + the data. Consequently, any corruption of the data is likely to have + severe effects and be difficult to correct. Uncompressed text, on + the other hand, will probably still be readable despite the presence + of some corrupted bytes. + + It is recommended that systems using this data format provide some + means of validating the integrity of the compressed data, such as by + setting and checking the CRC-32 check value. + +5. Acknowledgements + + Trademarks cited in this document are the property of their + respective owners. + + Jean-Loup Gailly designed the gzip format and wrote, with Mark Adler, + the related software described in this specification. Glenn + Randers-Pehrson converted this document to RFC and HTML format. + +6. Author's Address + + L. Peter Deutsch + Aladdin Enterprises + 203 Santa Margarita Ave. + Menlo Park, CA 94025 + + Phone: (415) 322-0103 (AM only) + FAX: (415) 322-1734 + EMail: + + Questions about the technical content of this specification can be + sent by email to: + + Jean-Loup Gailly and + Mark Adler + + Editorial comments on this specification can be sent by email to: + + L. Peter Deutsch and + Glenn Randers-Pehrson + + + +Deutsch Informational [Page 10] + +RFC 1952 GZIP File Format Specification May 1996 + + +7. Appendix: Jean-Loup Gailly's gzip utility + + The most widely used implementation of gzip compression, and the + original documentation on which this specification is based, were + created by Jean-Loup Gailly . Since this + implementation is a de facto standard, we mention some more of its + features here. Again, the material in this section is not part of + the specification per se, and implementations need not follow it to + be compliant. + + When compressing or decompressing a file, gzip preserves the + protection, ownership, and modification time attributes on the local + file system, since there is no provision for representing protection + attributes in the gzip file format itself. Since the file format + includes a modification time, the gzip decompressor provides a + command line switch that assigns the modification time from the file, + rather than the local modification time of the compressed input, to + the decompressed output. + +8. Appendix: Sample CRC Code + + The following sample code represents a practical implementation of + the CRC (Cyclic Redundancy Check). (See also ISO 3309 and ITU-T V.42 + for a formal specification.) + + The sample code is in the ANSI C programming language. Non C users + may find it easier to read with these hints: + + & Bitwise AND operator. + ^ Bitwise exclusive-OR operator. + >> Bitwise right shift operator. When applied to an + unsigned quantity, as here, right shift inserts zero + bit(s) at the left. + ! Logical NOT operator. + ++ "n++" increments the variable n. + 0xNNN 0x introduces a hexadecimal (base 16) constant. + Suffix L indicates a long value (at least 32 bits). + + /* Table of CRCs of all 8-bit messages. */ + unsigned long crc_table[256]; + + /* Flag: has the table been computed? Initially false. */ + int crc_table_computed = 0; + + /* Make the table for a fast CRC. */ + void make_crc_table(void) + { + unsigned long c; + + + +Deutsch Informational [Page 11] + +RFC 1952 GZIP File Format Specification May 1996 + + + int n, k; + for (n = 0; n < 256; n++) { + c = (unsigned long) n; + for (k = 0; k < 8; k++) { + if (c & 1) { + c = 0xedb88320L ^ (c >> 1); + } else { + c = c >> 1; + } + } + crc_table[n] = c; + } + crc_table_computed = 1; + } + + /* + Update a running crc with the bytes buf[0..len-1] and return + the updated crc. The crc should be initialized to zero. Pre- and + post-conditioning (one's complement) is performed within this + function so it shouldn't be done by the caller. Usage example: + + unsigned long crc = 0L; + + while (read_buffer(buffer, length) != EOF) { + crc = update_crc(crc, buffer, length); + } + if (crc != original_crc) error(); + */ + unsigned long update_crc(unsigned long crc, + unsigned char *buf, int len) + { + unsigned long c = crc ^ 0xffffffffL; + int n; + + if (!crc_table_computed) + make_crc_table(); + for (n = 0; n < len; n++) { + c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8); + } + return c ^ 0xffffffffL; + } + + /* Return the CRC of the bytes buf[0..len-1]. */ + unsigned long crc(unsigned char *buf, int len) + { + return update_crc(0L, buf, len); + } + + + + +Deutsch Informational [Page 12] + diff --git a/deps/zlib-1.2.11/doc/txtvsbin.txt b/deps/zlib-1.2.11/doc/txtvsbin.txt new file mode 100755 index 0000000..3d0f063 --- /dev/null +++ b/deps/zlib-1.2.11/doc/txtvsbin.txt @@ -0,0 +1,107 @@ +A Fast Method for Identifying Plain Text Files +============================================== + + +Introduction +------------ + +Given a file coming from an unknown source, it is sometimes desirable +to find out whether the format of that file is plain text. Although +this may appear like a simple task, a fully accurate detection of the +file type requires heavy-duty semantic analysis on the file contents. +It is, however, possible to obtain satisfactory results by employing +various heuristics. + +Previous versions of PKZip and other zip-compatible compression tools +were using a crude detection scheme: if more than 80% (4/5) of the bytes +found in a certain buffer are within the range [7..127], the file is +labeled as plain text, otherwise it is labeled as binary. A prominent +limitation of this scheme is the restriction to Latin-based alphabets. +Other alphabets, like Greek, Cyrillic or Asian, make extensive use of +the bytes within the range [128..255], and texts using these alphabets +are most often misidentified by this scheme; in other words, the rate +of false negatives is sometimes too high, which means that the recall +is low. Another weakness of this scheme is a reduced precision, due to +the false positives that may occur when binary files containing large +amounts of textual characters are misidentified as plain text. + +In this article we propose a new, simple detection scheme that features +a much increased precision and a near-100% recall. This scheme is +designed to work on ASCII, Unicode and other ASCII-derived alphabets, +and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.) +and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings +(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however. + + +The Algorithm +------------- + +The algorithm works by dividing the set of bytecodes [0..255] into three +categories: +- The white list of textual bytecodes: + 9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255. +- The gray list of tolerated bytecodes: + 7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC). +- The black list of undesired, non-textual bytecodes: + 0 (NUL) to 6, 14 to 31. + +If a file contains at least one byte that belongs to the white list and +no byte that belongs to the black list, then the file is categorized as +plain text; otherwise, it is categorized as binary. (The boundary case, +when the file is empty, automatically falls into the latter category.) + + +Rationale +--------- + +The idea behind this algorithm relies on two observations. + +The first observation is that, although the full range of 7-bit codes +[0..127] is properly specified by the ASCII standard, most control +characters in the range [0..31] are not used in practice. The only +widely-used, almost universally-portable control codes are 9 (TAB), +10 (LF) and 13 (CR). There are a few more control codes that are +recognized on a reduced range of platforms and text viewers/editors: +7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these +codes are rarely (if ever) used alone, without being accompanied by +some printable text. Even the newer, portable text formats such as +XML avoid using control characters outside the list mentioned here. + +The second observation is that most of the binary files tend to contain +control characters, especially 0 (NUL). Even though the older text +detection schemes observe the presence of non-ASCII codes from the range +[128..255], the precision rarely has to suffer if this upper range is +labeled as textual, because the files that are genuinely binary tend to +contain both control characters and codes from the upper range. On the +other hand, the upper range needs to be labeled as textual, because it +is used by virtually all ASCII extensions. In particular, this range is +used for encoding non-Latin scripts. + +Since there is no counting involved, other than simply observing the +presence or the absence of some byte values, the algorithm produces +consistent results, regardless what alphabet encoding is being used. +(If counting were involved, it could be possible to obtain different +results on a text encoded, say, using ISO-8859-16 versus UTF-8.) + +There is an extra category of plain text files that are "polluted" with +one or more black-listed codes, either by mistake or by peculiar design +considerations. In such cases, a scheme that tolerates a small fraction +of black-listed codes would provide an increased recall (i.e. more true +positives). This, however, incurs a reduced precision overall, since +false positives are more likely to appear in binary files that contain +large chunks of textual data. Furthermore, "polluted" plain text should +be regarded as binary by general-purpose text detection schemes, because +general-purpose text processing algorithms might not be applicable. +Under this premise, it is safe to say that our detection method provides +a near-100% recall. + +Experiments have been run on many files coming from various platforms +and applications. We tried plain text files, system logs, source code, +formatted office documents, compiled object code, etc. The results +confirm the optimistic assumptions about the capabilities of this +algorithm. + + +-- +Cosmin Truta +Last updated: 2006-May-28 diff --git a/deps/zlib-1.2.11/gzguts.h b/deps/zlib-1.2.11/gzguts.h new file mode 100755 index 0000000..45be573 --- /dev/null +++ b/deps/zlib-1.2.11/gzguts.h @@ -0,0 +1,222 @@ +/* gzguts.h -- zlib internal header definitions for gz* operations + * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +#ifndef _WIN32 +# include +#endif + +#ifdef _LARGEFILE64_SOURCE +# ifndef _LARGEFILE_SOURCE +# define _LARGEFILE_SOURCE 1 +# endif +# ifdef _FILE_OFFSET_BITS +# undef _FILE_OFFSET_BITS +# endif +#endif + +#ifdef HAVE_HIDDEN +# define ZLIB_INTERNAL __attribute__((visibility ("hidden"))) +#else +# define ZLIB_INTERNAL +#endif + +#include +#include "zlib.h" +#ifdef STDC +# include +# include +# include +#endif + +#ifndef _POSIX_SOURCE +# define _POSIX_SOURCE +#endif +#include + +#ifdef _WIN32 +# include +#endif + +#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32) +# include +#endif + +#if defined(_WIN32) || defined(__CYGWIN__) +# define WIDECHAR +#endif + +#ifdef WINAPI_FAMILY +# define open _open +# define read _read +# define write _write +# define close _close +#endif + +#ifdef NO_DEFLATE /* for compatibility with old definition */ +# define NO_GZCOMPRESS +#endif + +#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(__CYGWIN__) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410) +# ifndef HAVE_VSNPRINTF +# define HAVE_VSNPRINTF +# endif +#endif + +#ifndef HAVE_VSNPRINTF +# ifdef MSDOS +/* vsnprintf may exist on some MS-DOS compilers (DJGPP?), + but for now we just assume it doesn't. */ +# define NO_vsnprintf +# endif +# ifdef __TURBOC__ +# define NO_vsnprintf +# endif +# ifdef WIN32 +/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */ +# if !defined(vsnprintf) && !defined(NO_vsnprintf) +# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 ) +# define vsnprintf _vsnprintf +# endif +# endif +# endif +# ifdef __SASC +# define NO_vsnprintf +# endif +# ifdef VMS +# define NO_vsnprintf +# endif +# ifdef __OS400__ +# define NO_vsnprintf +# endif +# ifdef __MVS__ +# define NO_vsnprintf +# endif +#endif + +/* unlike snprintf (which is required in C99), _snprintf does not guarantee + null termination of the result -- however this is only used in gzlib.c where + the result is assured to fit in the space provided */ +#if defined(_MSC_VER) && _MSC_VER < 1900 +# define snprintf _snprintf +#endif + +#ifndef local +# define local static +#endif +/* since "static" is used to mean two completely different things in C, we + define "local" for the non-static meaning of "static", for readability + (compile with -Dlocal if your debugger can't find static symbols) */ + +/* gz* functions always use library allocation functions */ +#ifndef STDC + extern voidp malloc OF((uInt size)); + extern void free OF((voidpf ptr)); +#endif + +/* get errno and strerror definition */ +#if defined UNDER_CE +# include +# define zstrerror() gz_strwinerror((DWORD)GetLastError()) +#else +# ifndef NO_STRERROR +# include +# define zstrerror() strerror(errno) +# else +# define zstrerror() "stdio error (consult errno)" +# endif +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); +#endif + +/* default memLevel */ +#if MAX_MEM_LEVEL >= 8 +# define DEF_MEM_LEVEL 8 +#else +# define DEF_MEM_LEVEL MAX_MEM_LEVEL +#endif + +/* default i/o buffer size -- double this for output when reading (this and + twice this must be able to fit in an unsigned type) */ +#define GZBUFSIZE 8192 + +/* gzip modes, also provide a little integrity check on the passed structure */ +#define GZ_NONE 0 +#define GZ_READ 7247 +#define GZ_WRITE 31153 +#define GZ_APPEND 1 /* mode set to GZ_WRITE after the file is opened */ + +/* values for gz_state how */ +#define LOOK 0 /* look for a gzip header */ +#define COPY 1 /* copy input directly */ +#define GZIP 2 /* decompress a gzip stream */ + +/* internal gzip file state data structure */ +typedef struct { + /* exposed contents for gzgetc() macro */ + struct gzFile_s x; /* "x" for exposed */ + /* x.have: number of bytes available at x.next */ + /* x.next: next output data to deliver or write */ + /* x.pos: current position in uncompressed data */ + /* used for both reading and writing */ + int mode; /* see gzip modes above */ + int fd; /* file descriptor */ + char *path; /* path or fd for error messages */ + unsigned size; /* buffer size, zero if not allocated yet */ + unsigned want; /* requested buffer size, default is GZBUFSIZE */ + unsigned char *in; /* input buffer (double-sized when writing) */ + unsigned char *out; /* output buffer (double-sized when reading) */ + int direct; /* 0 if processing gzip, 1 if transparent */ + /* just for reading */ + int how; /* 0: get header, 1: copy, 2: decompress */ + z_off64_t start; /* where the gzip data started, for rewinding */ + int eof; /* true if end of input file reached */ + int past; /* true if read requested past end */ + /* just for writing */ + int level; /* compression level */ + int strategy; /* compression strategy */ + /* seek request */ + z_off64_t skip; /* amount to skip (already rewound if backwards) */ + int seek; /* true if seek request pending */ + /* error information */ + int err; /* error code */ + char *msg; /* error message */ + /* zlib inflate or deflate stream */ + z_stream strm; /* stream structure in-place (not a pointer) */ +} gz_state; +typedef gz_state FAR *gz_statep; + +/* shared functions */ +void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *)); +#if defined UNDER_CE +char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error)); +#endif + +/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t + value -- needed when comparing unsigned to z_off64_t, which is signed + (possible z_off64_t types off_t, off64_t, and long are all signed) */ +#ifdef INT_MAX +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX) +#else +unsigned ZLIB_INTERNAL gz_intmax OF((void)); +# define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax()) +#endif diff --git a/deps/zlib-1.2.11/infback.c b/deps/zlib-1.2.11/infback.c new file mode 100755 index 0000000..59679ec --- /dev/null +++ b/deps/zlib-1.2.11/infback.c @@ -0,0 +1,640 @@ +/* infback.c -- inflate using a call-back interface + * Copyright (C) 1995-2016 Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* + This code is largely copied from inflate.c. Normally either infback.o or + inflate.o would be linked into an application--not both. The interface + with inffast.c is retained so that optimized assembler-coded versions of + inflate_fast() can be used with either inflate.c or infback.c. + */ + +#include "zutil.h" +#include "inftrees.h" +#include "inflate.h" +#include "inffast.h" + +/* function prototypes */ +local void fixedtables OF((struct inflate_state FAR *state)); + +/* + strm provides memory allocation functions in zalloc and zfree, or + Z_NULL to use the library memory allocation functions. + + windowBits is in the range 8..15, and window is a user-supplied + window and output buffer that is 2**windowBits bytes. + */ +int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) +z_streamp strm; +int windowBits; +unsigned char FAR *window; +const char *version; +int stream_size; +{ + struct inflate_state FAR *state; + + if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + stream_size != (int)(sizeof(z_stream))) + return Z_VERSION_ERROR; + if (strm == Z_NULL || window == Z_NULL || + windowBits < 8 || windowBits > 15) + return Z_STREAM_ERROR; + strm->msg = Z_NULL; /* in case we return an error */ + if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif + } + if (strm->zfree == (free_func)0) +#ifdef Z_SOLO + return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif + state = (struct inflate_state FAR *)ZALLOC(strm, 1, + sizeof(struct inflate_state)); + if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); + strm->state = (struct internal_state FAR *)state; + state->dmax = 32768U; + state->wbits = (uInt)windowBits; + state->wsize = 1U << windowBits; + state->window = window; + state->wnext = 0; + state->whave = 0; + return Z_OK; +} + +/* + Return state with length and distance decoding tables and index sizes set to + fixed code decoding. Normally this returns fixed tables from inffixed.h. + If BUILDFIXED is defined, then instead this routine builds the tables the + first time it's called, and returns those tables the first time and + thereafter. This reduces the size of the code by about 2K bytes, in + exchange for a little execution time. However, BUILDFIXED should not be + used for threaded applications, since the rewriting of the tables and virgin + may not be thread-safe. + */ +local void fixedtables(state) +struct inflate_state FAR *state; +{ +#ifdef BUILDFIXED + static int virgin = 1; + static code *lenfix, *distfix; + static code fixed[544]; + + /* build fixed huffman tables if first call (may not be thread safe) */ + if (virgin) { + unsigned sym, bits; + static code *next; + + /* literal/length table */ + sym = 0; + while (sym < 144) state->lens[sym++] = 8; + while (sym < 256) state->lens[sym++] = 9; + while (sym < 280) state->lens[sym++] = 7; + while (sym < 288) state->lens[sym++] = 8; + next = fixed; + lenfix = next; + bits = 9; + inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); + + /* distance table */ + sym = 0; + while (sym < 32) state->lens[sym++] = 5; + distfix = next; + bits = 5; + inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); + + /* do this just once */ + virgin = 0; + } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ + state->lencode = lenfix; + state->lenbits = 9; + state->distcode = distfix; + state->distbits = 5; +} + +/* Macros for inflateBack(): */ + +/* Load returned state from inflate_fast() */ +#define LOAD() \ + do { \ + put = strm->next_out; \ + left = strm->avail_out; \ + next = strm->next_in; \ + have = strm->avail_in; \ + hold = state->hold; \ + bits = state->bits; \ + } while (0) + +/* Set state from registers for inflate_fast() */ +#define RESTORE() \ + do { \ + strm->next_out = put; \ + strm->avail_out = left; \ + strm->next_in = next; \ + strm->avail_in = have; \ + state->hold = hold; \ + state->bits = bits; \ + } while (0) + +/* Clear the input bit accumulator */ +#define INITBITS() \ + do { \ + hold = 0; \ + bits = 0; \ + } while (0) + +/* Assure that some input is available. If input is requested, but denied, + then return a Z_BUF_ERROR from inflateBack(). */ +#define PULL() \ + do { \ + if (have == 0) { \ + have = in(in_desc, &next); \ + if (have == 0) { \ + next = Z_NULL; \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* Get a byte of input into the bit accumulator, or return from inflateBack() + with an error if there is no input available. */ +#define PULLBYTE() \ + do { \ + PULL(); \ + have--; \ + hold += (unsigned long)(*next++) << bits; \ + bits += 8; \ + } while (0) + +/* Assure that there are at least n bits in the bit accumulator. If there is + not enough available input to do that, then return from inflateBack() with + an error. */ +#define NEEDBITS(n) \ + do { \ + while (bits < (unsigned)(n)) \ + PULLBYTE(); \ + } while (0) + +/* Return the low n bits of the bit accumulator (n < 16) */ +#define BITS(n) \ + ((unsigned)hold & ((1U << (n)) - 1)) + +/* Remove n bits from the bit accumulator */ +#define DROPBITS(n) \ + do { \ + hold >>= (n); \ + bits -= (unsigned)(n); \ + } while (0) + +/* Remove zero to seven bits as needed to go to a byte boundary */ +#define BYTEBITS() \ + do { \ + hold >>= bits & 7; \ + bits -= bits & 7; \ + } while (0) + +/* Assure that some output space is available, by writing out the window + if it's full. If the write fails, return from inflateBack() with a + Z_BUF_ERROR. */ +#define ROOM() \ + do { \ + if (left == 0) { \ + put = state->window; \ + left = state->wsize; \ + state->whave = left; \ + if (out(out_desc, put, left)) { \ + ret = Z_BUF_ERROR; \ + goto inf_leave; \ + } \ + } \ + } while (0) + +/* + strm provides the memory allocation functions and window buffer on input, + and provides information on the unused input on return. For Z_DATA_ERROR + returns, strm will also provide an error message. + + in() and out() are the call-back input and output functions. When + inflateBack() needs more input, it calls in(). When inflateBack() has + filled the window with output, or when it completes with data in the + window, it calls out() to write out the data. The application must not + change the provided input until in() is called again or inflateBack() + returns. The application must not change the window/output buffer until + inflateBack() returns. + + in() and out() are called with a descriptor parameter provided in the + inflateBack() call. This parameter can be a structure that provides the + information required to do the read or write, as well as accumulated + information on the input and output such as totals and check values. + + in() should return zero on failure. out() should return non-zero on + failure. If either in() or out() fails, than inflateBack() returns a + Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it + was in() or out() that caused in the error. Otherwise, inflateBack() + returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format + error, or Z_MEM_ERROR if it could not allocate memory for the state. + inflateBack() can also return Z_STREAM_ERROR if the input parameters + are not correct, i.e. strm is Z_NULL or the state was not initialized. + */ +int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) +z_streamp strm; +in_func in; +void FAR *in_desc; +out_func out; +void FAR *out_desc; +{ + struct inflate_state FAR *state; + z_const unsigned char FAR *next; /* next input */ + unsigned char FAR *put; /* next output */ + unsigned have, left; /* available input and output */ + unsigned long hold; /* bit buffer */ + unsigned bits; /* bits in bit buffer */ + unsigned copy; /* number of stored or match bytes to copy */ + unsigned char FAR *from; /* where to copy match bytes from */ + code here; /* current decoding table entry */ + code last; /* parent table entry */ + unsigned len; /* length to copy for repeats, bits to drop */ + int ret; /* return code */ + static const unsigned short order[19] = /* permutation of code lengths */ + {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; + + /* Check that the strm exists and that the state was initialized */ + if (strm == Z_NULL || strm->state == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* Reset the state */ + strm->msg = Z_NULL; + state->mode = TYPE; + state->last = 0; + state->whave = 0; + next = strm->next_in; + have = next != Z_NULL ? strm->avail_in : 0; + hold = 0; + bits = 0; + put = state->window; + left = state->wsize; + + /* Inflate until end of block marked as last */ + for (;;) + switch (state->mode) { + case TYPE: + /* determine and dispatch block type */ + if (state->last) { + BYTEBITS(); + state->mode = DONE; + break; + } + NEEDBITS(3); + state->last = BITS(1); + DROPBITS(1); + switch (BITS(2)) { + case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); + state->mode = STORED; + break; + case 1: /* fixed block */ + fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); + state->mode = LEN; /* decode codes */ + break; + case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); + state->mode = TABLE; + break; + case 3: + strm->msg = (char *)"invalid block type"; + state->mode = BAD; + } + DROPBITS(2); + break; + + case STORED: + /* get and verify stored block length */ + BYTEBITS(); /* go to byte boundary */ + NEEDBITS(32); + if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { + strm->msg = (char *)"invalid stored block lengths"; + state->mode = BAD; + break; + } + state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); + INITBITS(); + + /* copy stored block from input to output */ + while (state->length != 0) { + copy = state->length; + PULL(); + ROOM(); + if (copy > have) copy = have; + if (copy > left) copy = left; + zmemcpy(put, next, copy); + have -= copy; + next += copy; + left -= copy; + put += copy; + state->length -= copy; + } + Tracev((stderr, "inflate: stored end\n")); + state->mode = TYPE; + break; + + case TABLE: + /* get dynamic table entries descriptor */ + NEEDBITS(14); + state->nlen = BITS(5) + 257; + DROPBITS(5); + state->ndist = BITS(5) + 1; + DROPBITS(5); + state->ncode = BITS(4) + 4; + DROPBITS(4); +#ifndef PKZIP_BUG_WORKAROUND + if (state->nlen > 286 || state->ndist > 30) { + strm->msg = (char *)"too many length or distance symbols"; + state->mode = BAD; + break; + } +#endif + Tracev((stderr, "inflate: table sizes ok\n")); + + /* get code length code lengths (not a typo) */ + state->have = 0; + while (state->have < state->ncode) { + NEEDBITS(3); + state->lens[order[state->have++]] = (unsigned short)BITS(3); + DROPBITS(3); + } + while (state->have < 19) + state->lens[order[state->have++]] = 0; + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 7; + ret = inflate_table(CODES, state->lens, 19, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid code lengths set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: code lengths ok\n")); + + /* get length and distance code code lengths */ + state->have = 0; + while (state->have < state->nlen + state->ndist) { + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.val < 16) { + DROPBITS(here.bits); + state->lens[state->have++] = here.val; + } + else { + if (here.val == 16) { + NEEDBITS(here.bits + 2); + DROPBITS(here.bits); + if (state->have == 0) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + len = (unsigned)(state->lens[state->have - 1]); + copy = 3 + BITS(2); + DROPBITS(2); + } + else if (here.val == 17) { + NEEDBITS(here.bits + 3); + DROPBITS(here.bits); + len = 0; + copy = 3 + BITS(3); + DROPBITS(3); + } + else { + NEEDBITS(here.bits + 7); + DROPBITS(here.bits); + len = 0; + copy = 11 + BITS(7); + DROPBITS(7); + } + if (state->have + copy > state->nlen + state->ndist) { + strm->msg = (char *)"invalid bit length repeat"; + state->mode = BAD; + break; + } + while (copy--) + state->lens[state->have++] = (unsigned short)len; + } + } + + /* handle error breaks in while */ + if (state->mode == BAD) break; + + /* check for end-of-block code (better have one) */ + if (state->lens[256] == 0) { + strm->msg = (char *)"invalid code -- missing end-of-block"; + state->mode = BAD; + break; + } + + /* build code tables -- note: do not change the lenbits or distbits + values here (9 and 6) without reading the comments in inftrees.h + concerning the ENOUGH constants, which depend on those values */ + state->next = state->codes; + state->lencode = (code const FAR *)(state->next); + state->lenbits = 9; + ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), + &(state->lenbits), state->work); + if (ret) { + strm->msg = (char *)"invalid literal/lengths set"; + state->mode = BAD; + break; + } + state->distcode = (code const FAR *)(state->next); + state->distbits = 6; + ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, + &(state->next), &(state->distbits), state->work); + if (ret) { + strm->msg = (char *)"invalid distances set"; + state->mode = BAD; + break; + } + Tracev((stderr, "inflate: codes ok\n")); + state->mode = LEN; + + case LEN: + /* use inflate_fast() if we have enough input and output */ + if (have >= 6 && left >= 258) { + RESTORE(); + if (state->whave < state->wsize) + state->whave = state->wsize - left; + inflate_fast(strm, state->wsize); + LOAD(); + break; + } + + /* get a literal, length, or end-of-block code */ + for (;;) { + here = state->lencode[BITS(state->lenbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if (here.op && (here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->lencode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + state->length = (unsigned)here.val; + + /* process literal */ + if (here.op == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); + ROOM(); + *put++ = (unsigned char)(state->length); + left--; + state->mode = LEN; + break; + } + + /* process end of block */ + if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); + state->mode = TYPE; + break; + } + + /* invalid code */ + if (here.op & 64) { + strm->msg = (char *)"invalid literal/length code"; + state->mode = BAD; + break; + } + + /* length code -- get extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->length += BITS(state->extra); + DROPBITS(state->extra); + } + Tracevv((stderr, "inflate: length %u\n", state->length)); + + /* get distance code */ + for (;;) { + here = state->distcode[BITS(state->distbits)]; + if ((unsigned)(here.bits) <= bits) break; + PULLBYTE(); + } + if ((here.op & 0xf0) == 0) { + last = here; + for (;;) { + here = state->distcode[last.val + + (BITS(last.bits + last.op) >> last.bits)]; + if ((unsigned)(last.bits + here.bits) <= bits) break; + PULLBYTE(); + } + DROPBITS(last.bits); + } + DROPBITS(here.bits); + if (here.op & 64) { + strm->msg = (char *)"invalid distance code"; + state->mode = BAD; + break; + } + state->offset = (unsigned)here.val; + + /* get distance extra bits, if any */ + state->extra = (unsigned)(here.op) & 15; + if (state->extra != 0) { + NEEDBITS(state->extra); + state->offset += BITS(state->extra); + DROPBITS(state->extra); + } + if (state->offset > state->wsize - (state->whave < state->wsize ? + left : 0)) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } + Tracevv((stderr, "inflate: distance %u\n", state->offset)); + + /* copy match from window to output */ + do { + ROOM(); + copy = state->wsize - state->offset; + if (copy < left) { + from = put + copy; + copy = left - copy; + } + else { + from = put - state->offset; + copy = left; + } + if (copy > state->length) copy = state->length; + state->length -= copy; + left -= copy; + do { + *put++ = *from++; + } while (--copy); + } while (state->length != 0); + break; + + case DONE: + /* inflate stream terminated properly -- write leftover output */ + ret = Z_STREAM_END; + if (left < state->wsize) { + if (out(out_desc, state->window, state->wsize - left)) + ret = Z_BUF_ERROR; + } + goto inf_leave; + + case BAD: + ret = Z_DATA_ERROR; + goto inf_leave; + + default: /* can't happen, but makes compilers happy */ + ret = Z_STREAM_ERROR; + goto inf_leave; + } + + /* Return unused input */ + inf_leave: + strm->next_in = next; + strm->avail_in = have; + return ret; +} + +int ZEXPORT inflateBackEnd(strm) +z_streamp strm; +{ + if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) + return Z_STREAM_ERROR; + ZFREE(strm, strm->state); + strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); + return Z_OK; +} diff --git a/deps/zlib-1.2.11/inffast.c b/deps/zlib-1.2.11/inffast.c old mode 100644 new mode 100755 index 546845b..0dbd1db --- a/deps/zlib-1.2.11/inffast.c +++ b/deps/zlib-1.2.11/inffast.c @@ -8,6 +8,10 @@ #include "inflate.h" #include "inffast.h" +#ifdef ASMINF +# pragma message("Assembler code may have bugs -- use at your own risk") +#else + /* Decode literal, length, and distance codes and write out the resulting literal and match bytes until either not enough input or output is @@ -53,6 +57,9 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ unsigned char FAR *out; /* local strm->next_out */ unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ unsigned char FAR *end; /* while out < end, enough space available */ +#ifdef INFLATE_STRICT + unsigned dmax; /* maximum distance from zlib header */ +#endif unsigned wsize; /* window size or zero if not using window */ unsigned whave; /* valid bytes in the window */ unsigned wnext; /* window write index */ @@ -77,6 +84,9 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ out = strm->next_out; beg = out - (start - strm->avail_out); end = out + (strm->avail_out - 257); +#ifdef INFLATE_STRICT + dmax = state->dmax; +#endif wsize = state->wsize; whave = state->whave; wnext = state->wnext; @@ -104,6 +114,9 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ bits -= op; op = (unsigned)(here.op); if (op == 0) { /* literal */ + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); *out++ = (unsigned char)(here.val); } else if (op & 16) { /* length base */ @@ -118,6 +131,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ hold >>= op; bits -= op; } + Tracevv((stderr, "inflate: length %u\n", len)); if (bits < 15) { hold += (unsigned long)(*in++) << bits; bits += 8; @@ -142,8 +156,16 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ } } dist += (unsigned)hold & ((1U << op) - 1); +#ifdef INFLATE_STRICT + if (dist > dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif hold >>= op; bits -= op; + Tracevv((stderr, "inflate: distance %u\n", dist)); op = (unsigned)(out - beg); /* max distance in output */ if (dist > op) { /* see if copy from window */ op = dist - op; /* distance back in window */ @@ -154,6 +176,25 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ state->mode = BAD; break; } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + if (len <= op - whave) { + do { + *out++ = 0; + } while (--len); + continue; + } + len -= op - whave; + do { + *out++ = 0; + } while (--op > whave); + if (op == 0) { + from = out - dist; + do { + *out++ = *from++; + } while (--len); + continue; + } +#endif } from = window; if (wnext == 0) { /* very common case */ @@ -237,6 +278,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ goto dolen; } else if (op & 32) { /* end-of-block */ + Tracevv((stderr, "inflate: end of block\n")); state->mode = TYPE; break; } @@ -261,4 +303,21 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ 257 + (end - out) : 257 - (out - end)); state->hold = hold; state->bits = bits; + return; } + +/* + inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): + - Using bit fields for code structure + - Different op definition to avoid & for extra bits (do & for table bits) + - Three separate decoding do-loops for direct, window, and wnext == 0 + - Special case for distance > 1 copies to do overlapped load and store copy + - Explicit branch predictions (based on measured branch probabilities) + - Deferring match copy and interspersed it with decoding subsequent codes + - Swapping literal/length else + - Swapping window/direct else + - Larger unrolled copy loops (three is about right) + - Moving len -= 3 statement into middle of loop + */ + +#endif /* !ASMINF */ diff --git a/deps/zlib-1.2.11/inffixed.h b/deps/zlib-1.2.11/inffixed.h new file mode 100755 index 0000000..d628327 --- /dev/null +++ b/deps/zlib-1.2.11/inffixed.h @@ -0,0 +1,94 @@ + /* inffixed.h -- table for decoding fixed codes + * Generated automatically by makefixed(). + */ + + /* WARNING: this file should *not* be used by applications. + It is part of the implementation of this library and is + subject to change. Applications should only use zlib.h. + */ + + static const code lenfix[512] = { + {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48}, + {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128}, + {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59}, + {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176}, + {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20}, + {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100}, + {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8}, + {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216}, + {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76}, + {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114}, + {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2}, + {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148}, + {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42}, + {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86}, + {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15}, + {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236}, + {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62}, + {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142}, + {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31}, + {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162}, + {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25}, + {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105}, + {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4}, + {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202}, + {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69}, + {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125}, + {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13}, + {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195}, + {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35}, + {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91}, + {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19}, + {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246}, + {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55}, + {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135}, + {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99}, + {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190}, + {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16}, + {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96}, + {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6}, + {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209}, + {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72}, + {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116}, + {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4}, + {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153}, + {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44}, + {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82}, + {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11}, + {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229}, + {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58}, + {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138}, + {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51}, + {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173}, + {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30}, + {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110}, + {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0}, + {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195}, + {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65}, + {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121}, + {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9}, + {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258}, + {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37}, + {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93}, + {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23}, + {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251}, + {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51}, + {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131}, + {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67}, + {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183}, + {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23}, + {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103}, + {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9}, + {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223}, + {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79}, + {0,9,255} + }; + + static const code distfix[32] = { + {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025}, + {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193}, + {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385}, + {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577}, + {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073}, + {22,5,193},{64,5,0} + }; diff --git a/deps/zlib-1.2.11/inflate.c b/deps/zlib-1.2.11/inflate.c old mode 100644 new mode 100755 index 2237f79..2037e66 --- a/deps/zlib-1.2.11/inflate.c +++ b/deps/zlib-1.2.11/inflate.c @@ -8,11 +8,22 @@ #include "inflate.h" #include "inffast.h" +#ifdef MAKEFIXED +# ifndef BUILDFIXED +# define BUILDFIXED +# endif +#endif + /* function prototypes */ local int inflateStateCheck OF((z_streamp strm)); local void fixedtables OF((struct inflate_state FAR *state)); local int updatewindow OF((z_streamp strm, const unsigned char FAR *end, unsigned copy)); +#ifdef BUILDFIXED + void makefixed OF((void)); +#endif +local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf, + unsigned len)); local int inflateStateCheck(strm) z_streamp strm; @@ -42,12 +53,14 @@ z_streamp strm; state->mode = HEAD; state->last = 0; state->havedict = 0; + state->dmax = 32768U; state->head = Z_NULL; state->hold = 0; state->bits = 0; state->lencode = state->distcode = state->next = state->codes; state->sane = 1; state->back = -1; + Tracev((stderr, "inflate: reset\n")); return Z_OK; } @@ -117,13 +130,23 @@ int stream_size; if (strm == Z_NULL) return Z_STREAM_ERROR; strm->msg = Z_NULL; /* in case we return an error */ if (strm->zalloc == (alloc_func)0) { +#ifdef Z_SOLO return Z_STREAM_ERROR; +#else + strm->zalloc = zcalloc; + strm->opaque = (voidpf)0; +#endif } if (strm->zfree == (free_func)0) +#ifdef Z_SOLO return Z_STREAM_ERROR; +#else + strm->zfree = zcfree; +#endif state = (struct inflate_state FAR *) ZALLOC(strm, 1, sizeof(struct inflate_state)); if (state == Z_NULL) return Z_MEM_ERROR; + Tracev((stderr, "inflate: allocated\n")); strm->state = (struct internal_state FAR *)state; state->strm = strm; state->window = Z_NULL; @@ -147,6 +170,7 @@ int stream_size; local void fixedtables(state) struct inflate_state FAR *state; { +#ifdef BUILDFIXED static int virgin = 1; static code *lenfix, *distfix; static code fixed[544]; @@ -177,12 +201,76 @@ struct inflate_state FAR *state; /* do this just once */ virgin = 0; } +#else /* !BUILDFIXED */ +# include "inffixed.h" +#endif /* BUILDFIXED */ state->lencode = lenfix; state->lenbits = 9; state->distcode = distfix; state->distbits = 5; } +#ifdef MAKEFIXED +#include + +/* + Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also + defines BUILDFIXED, so the tables are built on the fly. makefixed() writes + those tables to stdout, which would be piped to inffixed.h. A small program + can simply call makefixed to do this: + + void makefixed(void); + + int main(void) + { + makefixed(); + return 0; + } + + Then that can be linked with zlib built with MAKEFIXED defined and run: + + a.out > inffixed.h + */ +void makefixed() +{ + unsigned low, size; + struct inflate_state state; + + fixedtables(&state); + puts(" /* inffixed.h -- table for decoding fixed codes"); + puts(" * Generated automatically by makefixed()."); + puts(" */"); + puts(""); + puts(" /* WARNING: this file should *not* be used by applications."); + puts(" It is part of the implementation of this library and is"); + puts(" subject to change. Applications should only use zlib.h."); + puts(" */"); + puts(""); + size = 1U << 9; + printf(" static const code lenfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 7) == 0) printf("\n "); + printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op, + state.lencode[low].bits, state.lencode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); + size = 1U << 5; + printf("\n static const code distfix[%u] = {", size); + low = 0; + for (;;) { + if ((low % 6) == 0) printf("\n "); + printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, + state.distcode[low].val); + if (++low == size) break; + putchar(','); + } + puts("\n };"); +} +#endif /* MAKEFIXED */ + /* Update the window with the last wsize (normally 32K) bytes written before returning. If window does not exist yet, create it. This is only called @@ -500,6 +588,8 @@ int flush; state->mode = BAD; break; } + state->dmax = 1U << len; + Tracev((stderr, "inflate: zlib header ok\n")); strm->adler = state->check = adler32(0L, Z_NULL, 0); state->mode = hold & 0x200 ? DICTID : TYPE; INITBITS(); @@ -661,10 +751,14 @@ int flush; DROPBITS(1); switch (BITS(2)) { case 0: /* stored block */ + Tracev((stderr, "inflate: stored block%s\n", + state->last ? " (last)" : "")); state->mode = STORED; break; case 1: /* fixed block */ fixedtables(state); + Tracev((stderr, "inflate: fixed codes block%s\n", + state->last ? " (last)" : "")); state->mode = LEN_; /* decode codes */ if (flush == Z_TREES) { DROPBITS(2); @@ -672,6 +766,8 @@ int flush; } break; case 2: /* dynamic block */ + Tracev((stderr, "inflate: dynamic codes block%s\n", + state->last ? " (last)" : "")); state->mode = TABLE; break; case 3: @@ -689,6 +785,8 @@ int flush; break; } state->length = (unsigned)hold & 0xffff; + Tracev((stderr, "inflate: stored length %u\n", + state->length)); INITBITS(); state->mode = COPY_; if (flush == Z_TREES) goto inf_leave; @@ -708,6 +806,7 @@ int flush; state->length -= copy; break; } + Tracev((stderr, "inflate: stored end\n")); state->mode = TYPE; break; case TABLE: @@ -725,6 +824,7 @@ int flush; break; } #endif + Tracev((stderr, "inflate: table sizes ok\n")); state->have = 0; state->mode = LENLENS; case LENLENS: @@ -745,6 +845,7 @@ int flush; state->mode = BAD; break; } + Tracev((stderr, "inflate: code lengths ok\n")); state->have = 0; state->mode = CODELENS; case CODELENS: @@ -827,6 +928,7 @@ int flush; state->mode = BAD; break; } + Tracev((stderr, "inflate: codes ok\n")); state->mode = LEN_; if (flush == Z_TREES) goto inf_leave; case LEN_: @@ -861,10 +963,14 @@ int flush; state->back += here.bits; state->length = (unsigned)here.val; if ((int)(here.op) == 0) { + Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? + "inflate: literal '%c'\n" : + "inflate: literal 0x%02x\n", here.val)); state->mode = LIT; break; } if (here.op & 32) { + Tracevv((stderr, "inflate: end of block\n")); state->back = -1; state->mode = TYPE; break; @@ -883,6 +989,7 @@ int flush; DROPBITS(state->extra); state->back += state->extra; } + Tracevv((stderr, "inflate: length %u\n", state->length)); state->was = state->length; state->mode = DIST; case DIST: @@ -919,6 +1026,14 @@ int flush; DROPBITS(state->extra); state->back += state->extra; } +#ifdef INFLATE_STRICT + if (state->offset > state->dmax) { + strm->msg = (char *)"invalid distance too far back"; + state->mode = BAD; + break; + } +#endif + Tracevv((stderr, "inflate: distance %u\n", state->offset)); state->mode = MATCH; case MATCH: if (left == 0) goto inf_leave; @@ -931,6 +1046,19 @@ int flush; state->mode = BAD; break; } +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + Trace((stderr, "inflate.c too far\n")); + copy -= state->whave; + if (copy > state->length) copy = state->length; + if (copy > left) copy = left; + left -= copy; + state->length -= copy; + do { + *put++ = 0; + } while (--copy); + if (state->length == 0) state->mode = LEN; + break; +#endif } if (copy > state->wnext) { copy -= state->wnext; @@ -978,6 +1106,7 @@ int flush; break; } INITBITS(); + Tracev((stderr, "inflate: check matches trailer\n")); } #ifdef GUNZIP state->mode = LENGTH; @@ -990,6 +1119,7 @@ int flush; break; } INITBITS(); + Tracev((stderr, "inflate: length matches trailer\n")); } #endif state->mode = DONE; @@ -1046,5 +1176,278 @@ z_streamp strm; if (state->window != Z_NULL) ZFREE(strm, state->window); ZFREE(strm, strm->state); strm->state = Z_NULL; + Tracev((stderr, "inflate: end\n")); return Z_OK; } + +int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength) +z_streamp strm; +Bytef *dictionary; +uInt *dictLength; +{ + struct inflate_state FAR *state; + + /* check state */ + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + + /* copy dictionary */ + if (state->whave && dictionary != Z_NULL) { + zmemcpy(dictionary, state->window + state->wnext, + state->whave - state->wnext); + zmemcpy(dictionary + state->whave - state->wnext, + state->window, state->wnext); + } + if (dictLength != Z_NULL) + *dictLength = state->whave; + return Z_OK; +} + +int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) +z_streamp strm; +const Bytef *dictionary; +uInt dictLength; +{ + struct inflate_state FAR *state; + unsigned long dictid; + int ret; + + /* check state */ + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (state->wrap != 0 && state->mode != DICT) + return Z_STREAM_ERROR; + + /* check for correct dictionary identifier */ + if (state->mode == DICT) { + dictid = adler32(0L, Z_NULL, 0); + dictid = adler32(dictid, dictionary, dictLength); + if (dictid != state->check) + return Z_DATA_ERROR; + } + + /* copy dictionary to window using updatewindow(), which will amend the + existing dictionary if appropriate */ + ret = updatewindow(strm, dictionary + dictLength, dictLength); + if (ret) { + state->mode = MEM; + return Z_MEM_ERROR; + } + state->havedict = 1; + Tracev((stderr, "inflate: dictionary set\n")); + return Z_OK; +} + +int ZEXPORT inflateGetHeader(strm, head) +z_streamp strm; +gz_headerp head; +{ + struct inflate_state FAR *state; + + /* check state */ + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; + + /* save header structure */ + state->head = head; + head->done = 0; + return Z_OK; +} + +/* + Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found + or when out of input. When called, *have is the number of pattern bytes + found in order so far, in 0..3. On return *have is updated to the new + state. If on return *have equals four, then the pattern was found and the + return value is how many bytes were read including the last byte of the + pattern. If *have is less than four, then the pattern has not been found + yet and the return value is len. In the latter case, syncsearch() can be + called again with more data and the *have state. *have is initialized to + zero for the first call. + */ +local unsigned syncsearch(have, buf, len) +unsigned FAR *have; +const unsigned char FAR *buf; +unsigned len; +{ + unsigned got; + unsigned next; + + got = *have; + next = 0; + while (next < len && got < 4) { + if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) + got++; + else if (buf[next]) + got = 0; + else + got = 4 - got; + next++; + } + *have = got; + return next; +} + +int ZEXPORT inflateSync(strm) +z_streamp strm; +{ + unsigned len; /* number of bytes to look at or looked at */ + unsigned long in, out; /* temporary to save total_in and total_out */ + unsigned char buf[4]; /* to restore bit buffer to byte string */ + struct inflate_state FAR *state; + + /* check parameters */ + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; + + /* if first time, start search in bit buffer */ + if (state->mode != SYNC) { + state->mode = SYNC; + state->hold <<= state->bits & 7; + state->bits -= state->bits & 7; + len = 0; + while (state->bits >= 8) { + buf[len++] = (unsigned char)(state->hold); + state->hold >>= 8; + state->bits -= 8; + } + state->have = 0; + syncsearch(&(state->have), buf, len); + } + + /* search available input */ + len = syncsearch(&(state->have), strm->next_in, strm->avail_in); + strm->avail_in -= len; + strm->next_in += len; + strm->total_in += len; + + /* return no joy or set up to restart inflate() on a new block */ + if (state->have != 4) return Z_DATA_ERROR; + in = strm->total_in; out = strm->total_out; + inflateReset(strm); + strm->total_in = in; strm->total_out = out; + state->mode = TYPE; + return Z_OK; +} + +/* + Returns true if inflate is currently at the end of a block generated by + Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + implementation to provide an additional safety check. PPP uses + Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored + block. When decompressing, PPP checks that at the end of input packet, + inflate is waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + return state->mode == STORED && state->bits == 0; +} + +int ZEXPORT inflateCopy(dest, source) +z_streamp dest; +z_streamp source; +{ + struct inflate_state FAR *state; + struct inflate_state FAR *copy; + unsigned char FAR *window; + unsigned wsize; + + /* check input */ + if (inflateStateCheck(source) || dest == Z_NULL) + return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)source->state; + + /* allocate space */ + copy = (struct inflate_state FAR *) + ZALLOC(source, 1, sizeof(struct inflate_state)); + if (copy == Z_NULL) return Z_MEM_ERROR; + window = Z_NULL; + if (state->window != Z_NULL) { + window = (unsigned char FAR *) + ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); + if (window == Z_NULL) { + ZFREE(source, copy); + return Z_MEM_ERROR; + } + } + + /* copy state */ + zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream)); + zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state)); + copy->strm = dest; + if (state->lencode >= state->codes && + state->lencode <= state->codes + ENOUGH - 1) { + copy->lencode = copy->codes + (state->lencode - state->codes); + copy->distcode = copy->codes + (state->distcode - state->codes); + } + copy->next = copy->codes + (state->next - state->codes); + if (window != Z_NULL) { + wsize = 1U << state->wbits; + zmemcpy(window, state->window, wsize); + } + copy->window = window; + dest->state = (struct internal_state FAR *)copy; + return Z_OK; +} + +int ZEXPORT inflateUndermine(strm, subvert) +z_streamp strm; +int subvert; +{ + struct inflate_state FAR *state; + + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; +#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR + state->sane = !subvert; + return Z_OK; +#else + (void)subvert; + state->sane = 1; + return Z_DATA_ERROR; +#endif +} + +int ZEXPORT inflateValidate(strm, check) +z_streamp strm; +int check; +{ + struct inflate_state FAR *state; + + if (inflateStateCheck(strm)) return Z_STREAM_ERROR; + state = (struct inflate_state FAR *)strm->state; + if (check) + state->wrap |= 4; + else + state->wrap &= ~4; + return Z_OK; +} + +long ZEXPORT inflateMark(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + + if (inflateStateCheck(strm)) + return -(1L << 16); + state = (struct inflate_state FAR *)strm->state; + return (long)(((unsigned long)((long)state->back)) << 16) + + (state->mode == COPY ? state->length : + (state->mode == MATCH ? state->was - state->length : 0)); +} + +unsigned long ZEXPORT inflateCodesUsed(strm) +z_streamp strm; +{ + struct inflate_state FAR *state; + if (inflateStateCheck(strm)) return (unsigned long)-1; + state = (struct inflate_state FAR *)strm->state; + return (unsigned long)(state->next - state->codes); +} diff --git a/deps/zlib-1.2.11/inflate.h b/deps/zlib-1.2.11/inflate.h old mode 100644 new mode 100755 index dc2402a..a46cce6 --- a/deps/zlib-1.2.11/inflate.h +++ b/deps/zlib-1.2.11/inflate.h @@ -87,6 +87,7 @@ struct inflate_state { bit 2 true to validate check value */ int havedict; /* true if dictionary provided */ int flags; /* gzip header method and flags (0 if zlib) */ + unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */ unsigned long check; /* protected copy of check value */ unsigned long total; /* protected copy of output count */ gz_headerp head; /* where to save gzip header information */ diff --git a/deps/zlib-1.2.11/zconf.h b/deps/zlib-1.2.11/zconf.h old mode 100644 new mode 100755 index 9d5563e..227aae1 --- a/deps/zlib-1.2.11/zconf.h +++ b/deps/zlib-1.2.11/zconf.h @@ -8,8 +8,6 @@ #ifndef ZCONF_H #define ZCONF_H -#include - /* * If you *really* need a unique prefix for all types and library functions, * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. @@ -29,9 +27,75 @@ # define _tr_stored_block z__tr_stored_block # define _tr_tally z__tr_tally # define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 # define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif # define crc32 z_crc32 # define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif # define inflate z_inflate # define inflateBack z_inflateBack # define inflateBackEnd z_inflateBackEnd @@ -52,6 +116,17 @@ # define inflate_copyright z_inflate_copyright # define inflate_fast z_inflate_fast # define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion /* all zlib typedefs in zlib.h and zconf.h */ # define Byte z_Byte @@ -59,6 +134,9 @@ # define alloc_func z_alloc_func # define charf z_charf # define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif # define gz_header z_gz_header # define gz_headerp z_gz_headerp # define in_func z_in_func @@ -138,9 +216,32 @@ # define STDC #endif -#define z_const const +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif -typedef size_t z_size_t; +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO + typedef unsigned long z_size_t; +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL @@ -184,7 +285,83 @@ typedef size_t z_size_t; #endif #ifndef Z_ARG /* function prototypes for stdarg */ -#define Z_ARG(args) args +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif #endif #ifndef ZEXTERN @@ -207,7 +384,12 @@ typedef unsigned char Byte; /* 8 bits */ typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ -typedef Byte FAR Bytef; +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif typedef char FAR charf; typedef int FAR intf; typedef uInt FAR uIntf; @@ -223,11 +405,48 @@ typedef uLong FAR uLongf; typedef Byte *voidp; #endif -typedef unsigned long z_crc_t; +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif -#include /* for off_t */ -#include /* for va_list */ -#include /* for wchar_t */ +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even @@ -239,14 +458,19 @@ typedef unsigned long z_crc_t; # undef _LARGEFILE64_SOURCE #endif -#ifdef _WIN32 -#include -#else -#include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H #endif - -#ifndef z_off_t -#define z_off_t off_t +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif #endif #if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 @@ -261,14 +485,41 @@ typedef unsigned long z_crc_t; # define Z_WANT64 #endif +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + #ifndef z_off_t # define z_off_t long #endif #if !defined(_WIN32) && defined(Z_LARGE64) -#define z_off64_t off64_t +# define z_off64_t off64_t #else -#define z_off64_t z_off_t +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") #endif #endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zconf.h.cmakein b/deps/zlib-1.2.11/zconf.h.cmakein new file mode 100755 index 0000000..a7f24cc --- /dev/null +++ b/deps/zlib-1.2.11/zconf.h.cmakein @@ -0,0 +1,536 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +#cmakedefine Z_PREFIX +#cmakedefine Z_HAVE_UNISTD_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols and init macros */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit z_inflateBackInit +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCodesUsed z_inflateCodesUsed +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetDictionary z_inflateGetDictionary +# define inflateGetHeader z_inflateGetHeader +# define inflateInit z_inflateInit +# define inflateInit2 z_inflateInit2 +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateResetKeep z_inflateResetKeep +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateValidate z_inflateValidate +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO + typedef unsigned long z_size_t; +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus about 7 kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zconf.h.in b/deps/zlib-1.2.11/zconf.h.in new file mode 100755 index 0000000..5e1d68a --- /dev/null +++ b/deps/zlib-1.2.11/zconf.h.in @@ -0,0 +1,534 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols and init macros */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit z_inflateBackInit +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCodesUsed z_inflateCodesUsed +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetDictionary z_inflateGetDictionary +# define inflateGetHeader z_inflateGetHeader +# define inflateInit z_inflateInit +# define inflateInit2 z_inflateInit2 +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateResetKeep z_inflateResetKeep +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateValidate z_inflateValidate +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO + typedef unsigned long z_size_t; +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus about 7 kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/deps/zlib-1.2.11/zlib.3 b/deps/zlib-1.2.11/zlib.3 new file mode 100755 index 0000000..bda4eb0 --- /dev/null +++ b/deps/zlib-1.2.11/zlib.3 @@ -0,0 +1,149 @@ +.TH ZLIB 3 "15 Jan 2017" +.SH NAME +zlib \- compression/decompression library +.SH SYNOPSIS +[see +.I zlib.h +for full description] +.SH DESCRIPTION +The +.I zlib +library is a general purpose data compression library. +The code is thread safe, assuming that the standard library functions +used are thread safe, such as memory allocation routines. +It provides in-memory compression and decompression functions, +including integrity checks of the uncompressed data. +This version of the library supports only one compression method (deflation) +but other algorithms may be added later +with the same stream interface. +.LP +Compression can be done in a single step if the buffers are large enough +or can be done by repeated calls of the compression function. +In the latter case, +the application must provide more input and/or consume the output +(providing more output space) before each call. +.LP +The library also supports reading and writing files in +.IR gzip (1) +(.gz) format +with an interface similar to that of stdio. +.LP +The library does not install any signal handler. +The decoder checks the consistency of the compressed data, +so the library should never crash even in the case of corrupted input. +.LP +All functions of the compression library are documented in the file +.IR zlib.h . +The distribution source includes examples of use of the library +in the files +.I test/example.c +and +.IR test/minigzip.c, +as well as other examples in the +.IR examples/ +directory. +.LP +Changes to this version are documented in the file +.I ChangeLog +that accompanies the source. +.LP +.I zlib +is built in to many languages and operating systems, including but not limited to +Java, Python, .NET, PHP, Perl, Ruby, Swift, and Go. +.LP +An experimental package to read and write files in the .zip format, +written on top of +.I zlib +by Gilles Vollant (info@winimage.com), +is available at: +.IP +http://www.winimage.com/zLibDll/minizip.html +and also in the +.I contrib/minizip +directory of the main +.I zlib +source distribution. +.SH "SEE ALSO" +The +.I zlib +web site can be found at: +.IP +http://zlib.net/ +.LP +The data format used by the +.I zlib +library is described by RFC +(Request for Comments) 1950 to 1952 in the files: +.IP +http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format) +.br +http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format) +.br +http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format) +.LP +Mark Nelson wrote an article about +.I zlib +for the Jan. 1997 issue of Dr. Dobb's Journal; +a copy of the article is available at: +.IP +http://marknelson.us/1997/01/01/zlib-engine/ +.SH "REPORTING PROBLEMS" +Before reporting a problem, +please check the +.I zlib +web site to verify that you have the latest version of +.IR zlib ; +otherwise, +obtain the latest version and see if the problem still exists. +Please read the +.I zlib +FAQ at: +.IP +http://zlib.net/zlib_faq.html +.LP +before asking for help. +Send questions and/or comments to zlib@gzip.org, +or (for the Windows DLL version) to Gilles Vollant (info@winimage.com). +.SH AUTHORS AND LICENSE +Version 1.2.11 +.LP +Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler +.LP +This software is provided 'as-is', without any express or implied +warranty. In no event will the authors be held liable for any damages +arising from the use of this software. +.LP +Permission is granted to anyone to use this software for any purpose, +including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: +.LP +.nr step 1 1 +.IP \n[step]. 3 +The origin of this software must not be misrepresented; you must not +claim that you wrote the original software. If you use this software +in a product, an acknowledgment in the product documentation would be +appreciated but is not required. +.IP \n+[step]. +Altered source versions must be plainly marked as such, and must not be +misrepresented as being the original software. +.IP \n+[step]. +This notice may not be removed or altered from any source distribution. +.LP +Jean-loup Gailly Mark Adler +.br +jloup@gzip.org madler@alumni.caltech.edu +.LP +The deflate format used by +.I zlib +was defined by Phil Katz. +The deflate and +.I zlib +specifications were written by L. Peter Deutsch. +Thanks to all the people who reported problems and suggested various +improvements in +.IR zlib ; +who are too numerous to cite here. +.LP +UNIX manual page by R. P. C. Rodgers, +U.S. National Library of Medicine (rodgers@nlm.nih.gov). +.\" end of man page diff --git a/deps/zlib-1.2.11/zlib.3.pdf b/deps/zlib-1.2.11/zlib.3.pdf new file mode 100755 index 0000000..6fa519c Binary files /dev/null and b/deps/zlib-1.2.11/zlib.3.pdf differ diff --git a/deps/zlib-1.2.11/zlib.h b/deps/zlib-1.2.11/zlib.h old mode 100644 new mode 100755 index dff9e79..41a44d9 --- a/deps/zlib-1.2.11/zlib.h +++ b/deps/zlib-1.2.11/zlib.h @@ -211,7 +211,18 @@ typedef gz_header FAR *gz_headerp; #define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ -/* basic functions */ +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ /* ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); @@ -966,7 +977,513 @@ ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); state was inconsistent. */ -/* checksum functions */ +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: ZLIB_DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. compress() is equivalent to compress2() with a level + parameter of Z_DEFAULT_COMPRESSION. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed data. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + +ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen)); +/* + Same as uncompress, except that sourceLen is a pointer, where the + length of the source is *sourceLen. On return, *sourceLen is the number of + source bytes consumed. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Three times that size in buffer space is allocated. A larger buffer + size of, for example, 64K or 128K bytes will noticeably increase the speed + of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. Previously provided + data is flushed before the parameter change. + + gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not + opened for writing, Z_ERRNO if there is an error writing the flushed data, + or Z_MEM_ERROR if there is a memory allocation error. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. If len is too large to fit in an int, + then nothing is read, -1 is returned, and the error state is set to + Z_STREAM_ERROR. +*/ + +ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems, + gzFile file)); +/* + Read up to nitems items of size size from file to buf, otherwise operating + as gzread() does. This duplicates the interface of stdio's fread(), with + size_t request and return types. If the library defines size_t, then + z_size_t is identical to size_t. If not, then z_size_t is an unsigned + integer type that can contain a pointer. + + gzfread() returns the number of full items read of size size, or zero if + the end of the file was reached and a full item could not be read, or if + there was an error. gzerror() must be consulted if zero is returned in + order to determine if there was an error. If the multiplication of size and + nitems overflows, i.e. the product does not fit in a z_size_t, then nothing + is read, zero is returned, and the error state is set to Z_STREAM_ERROR. + + In the event that the end of file is reached and only a partial item is + available at the end, i.e. the remaining uncompressed data length is not a + multiple of size, then the final partial item is nevetheless read into buf + and the end-of-file flag is set. The length of the partial item read is not + provided, but could be inferred from the result of gztell(). This behavior + is the same as the behavior of fread() implementations in common libraries, + but it prevents the direct use of gzfread() to read a concurrently written + file, reseting and retrying on end-of-file, when size is not 1. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size, + z_size_t nitems, gzFile file)); +/* + gzfwrite() writes nitems items of size size from buf to file, duplicating + the interface of stdio's fwrite(), with size_t request and return types. If + the library defines size_t, then z_size_t is identical to size_t. If not, + then z_size_t is an unsigned integer type that can contain a pointer. + + gzfwrite() returns the number of full items written of size size, or zero + if there was an error. If the multiplication of size and nitems overflows, + i.e. the product does not fit in a z_size_t, then nothing is written, zero + is returned, and the error state is set to Z_STREAM_ERROR. +*/ + +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or a negative zlib error code in case + of error. The number of uncompressed bytes written is limited to 8191, or + one less than the buffer size given to gzbuffer(). The caller should assure + that this limit is not exceeded. If it is exceeded, then gzprintf() will + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf() + because the secure snprintf() or vsnprintf() functions were not available. + This can be determined using zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatenated gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ /* These functions are not related to compression but are exported @@ -999,6 +1516,18 @@ ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf, Same as adler32(), but with a size_t length. */ +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); /* Update a running CRC-32 with the bytes buf[0..len-1] and return the @@ -1022,7 +1551,18 @@ ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf, Same as crc32(), but with a size_t length. */ -/* various hacks, don't look :) */ +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ /* inflateInit is a macro to allow checking the zlib version * and the compiler's view of z_stream: @@ -1055,8 +1595,105 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, ZLIB_VERSION, (int)sizeof(z_stream)) #endif +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + /* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateValidate OF((z_streamp, int)); +ZEXTERN unsigned long ZEXPORT inflateCodesUsed OF ((z_streamp)); ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif #ifdef __cplusplus } diff --git a/deps/zlib-1.2.11/zlib.map b/deps/zlib-1.2.11/zlib.map new file mode 100755 index 0000000..40fa9db --- /dev/null +++ b/deps/zlib-1.2.11/zlib.map @@ -0,0 +1,94 @@ +ZLIB_1.2.0 { + global: + compressBound; + deflateBound; + inflateBack; + inflateBackEnd; + inflateBackInit_; + inflateCopy; + local: + deflate_copyright; + inflate_copyright; + inflate_fast; + inflate_table; + zcalloc; + zcfree; + z_errmsg; + gz_error; + gz_intmax; + _*; +}; + +ZLIB_1.2.0.2 { + gzclearerr; + gzungetc; + zlibCompileFlags; +} ZLIB_1.2.0; + +ZLIB_1.2.0.8 { + deflatePrime; +} ZLIB_1.2.0.2; + +ZLIB_1.2.2 { + adler32_combine; + crc32_combine; + deflateSetHeader; + inflateGetHeader; +} ZLIB_1.2.0.8; + +ZLIB_1.2.2.3 { + deflateTune; + gzdirect; +} ZLIB_1.2.2; + +ZLIB_1.2.2.4 { + inflatePrime; +} ZLIB_1.2.2.3; + +ZLIB_1.2.3.3 { + adler32_combine64; + crc32_combine64; + gzopen64; + gzseek64; + gztell64; + inflateUndermine; +} ZLIB_1.2.2.4; + +ZLIB_1.2.3.4 { + inflateReset2; + inflateMark; +} ZLIB_1.2.3.3; + +ZLIB_1.2.3.5 { + gzbuffer; + gzoffset; + gzoffset64; + gzclose_r; + gzclose_w; +} ZLIB_1.2.3.4; + +ZLIB_1.2.5.1 { + deflatePending; +} ZLIB_1.2.3.5; + +ZLIB_1.2.5.2 { + deflateResetKeep; + gzgetc_; + inflateResetKeep; +} ZLIB_1.2.5.1; + +ZLIB_1.2.7.1 { + inflateGetDictionary; + gzvprintf; +} ZLIB_1.2.5.2; + +ZLIB_1.2.9 { + inflateCodesUsed; + inflateValidate; + uncompress2; + gzfread; + gzfwrite; + deflateGetDictionary; + adler32_z; + crc32_z; +} ZLIB_1.2.7.1; diff --git a/deps/zlib-1.2.11/zlib.pc.cmakein b/deps/zlib-1.2.11/zlib.pc.cmakein new file mode 100755 index 0000000..a5e6429 --- /dev/null +++ b/deps/zlib-1.2.11/zlib.pc.cmakein @@ -0,0 +1,13 @@ +prefix=@CMAKE_INSTALL_PREFIX@ +exec_prefix=@CMAKE_INSTALL_PREFIX@ +libdir=@INSTALL_LIB_DIR@ +sharedlibdir=@INSTALL_LIB_DIR@ +includedir=@INSTALL_INC_DIR@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/deps/zlib-1.2.11/zlib.pc.in b/deps/zlib-1.2.11/zlib.pc.in new file mode 100755 index 0000000..7e5acf9 --- /dev/null +++ b/deps/zlib-1.2.11/zlib.pc.in @@ -0,0 +1,13 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +sharedlibdir=@sharedlibdir@ +includedir=@includedir@ + +Name: zlib +Description: zlib compression library +Version: @VERSION@ + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir} diff --git a/deps/zlib-1.2.11/zlib2ansi b/deps/zlib-1.2.11/zlib2ansi new file mode 100755 index 0000000..15e3e16 --- /dev/null +++ b/deps/zlib-1.2.11/zlib2ansi @@ -0,0 +1,152 @@ +#!/usr/bin/perl + +# Transform K&R C function definitions into ANSI equivalent. +# +# Author: Paul Marquess +# Version: 1.0 +# Date: 3 October 2006 + +# TODO +# +# Asumes no function pointer parameters. unless they are typedefed. +# Assumes no literal strings that look like function definitions +# Assumes functions start at the beginning of a line + +use strict; +use warnings; + +local $/; +$_ = <>; + +my $sp = qr{ \s* (?: /\* .*? \*/ )? \s* }x; # assume no nested comments + +my $d1 = qr{ $sp (?: [\w\*\s]+ $sp)* $sp \w+ $sp [\[\]\s]* $sp }x ; +my $decl = qr{ $sp (?: \w+ $sp )+ $d1 }xo ; +my $dList = qr{ $sp $decl (?: $sp , $d1 )* $sp ; $sp }xo ; + + +while (s/^ + ( # Start $1 + ( # Start $2 + .*? # Minimal eat content + ( ^ \w [\w\s\*]+ ) # $3 -- function name + \s* # optional whitespace + ) # $2 - Matched up to before parameter list + + \( \s* # Literal "(" + optional whitespace + ( [^\)]+ ) # $4 - one or more anythings except ")" + \s* \) # optional whitespace surrounding a Literal ")" + + ( (?: $dList )+ ) # $5 + + $sp ^ { # literal "{" at start of line + ) # Remember to $1 + //xsom + ) +{ + my $all = $1 ; + my $prefix = $2; + my $param_list = $4 ; + my $params = $5; + + StripComments($params); + StripComments($param_list); + $param_list =~ s/^\s+//; + $param_list =~ s/\s+$//; + + my $i = 0 ; + my %pList = map { $_ => $i++ } + split /\s*,\s*/, $param_list; + my $pMatch = '(\b' . join('|', keys %pList) . '\b)\W*$' ; + + my @params = split /\s*;\s*/, $params; + my @outParams = (); + foreach my $p (@params) + { + if ($p =~ /,/) + { + my @bits = split /\s*,\s*/, $p; + my $first = shift @bits; + $first =~ s/^\s*//; + push @outParams, $first; + $first =~ /^(\w+\s*)/; + my $type = $1 ; + push @outParams, map { $type . $_ } @bits; + } + else + { + $p =~ s/^\s+//; + push @outParams, $p; + } + } + + + my %tmp = map { /$pMatch/; $_ => $pList{$1} } + @outParams ; + + @outParams = map { " $_" } + sort { $tmp{$a} <=> $tmp{$b} } + @outParams ; + + print $prefix ; + print "(\n" . join(",\n", @outParams) . ")\n"; + print "{" ; + +} + +# Output any trailing code. +print ; +exit 0; + + +sub StripComments +{ + + no warnings; + + # Strip C & C++ coments + # From the perlfaq + $_[0] =~ + + s{ + /\* ## Start of /* ... */ comment + [^*]*\*+ ## Non-* followed by 1-or-more *'s + ( + [^/*][^*]*\*+ + )* ## 0-or-more things which don't start with / + ## but do end with '*' + / ## End of /* ... */ comment + + | ## OR C++ Comment + // ## Start of C++ comment // + [^\n]* ## followed by 0-or-more non end of line characters + + | ## OR various things which aren't comments: + + ( + " ## Start of " ... " string + ( + \\. ## Escaped char + | ## OR + [^"\\] ## Non "\ + )* + " ## End of " ... " string + + | ## OR + + ' ## Start of ' ... ' string + ( + \\. ## Escaped char + | ## OR + [^'\\] ## Non '\ + )* + ' ## End of ' ... ' string + + | ## OR + + . ## Anything other char + [^/"'\\]* ## Chars which doesn't start a comment, string or escape + ) + }{$2}gxs; + +} diff --git a/deps/zlib-1.2.11/zutil.c b/deps/zlib-1.2.11/zutil.c new file mode 100755 index 0000000..a76c6b0 --- /dev/null +++ b/deps/zlib-1.2.11/zutil.c @@ -0,0 +1,325 @@ +/* zutil.c -- target dependent utility functions for the compression library + * Copyright (C) 1995-2017 Jean-loup Gailly + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#include "zutil.h" +#ifndef Z_SOLO +# include "gzguts.h" +#endif + +z_const char * const z_errmsg[10] = { + (z_const char *)"need dictionary", /* Z_NEED_DICT 2 */ + (z_const char *)"stream end", /* Z_STREAM_END 1 */ + (z_const char *)"", /* Z_OK 0 */ + (z_const char *)"file error", /* Z_ERRNO (-1) */ + (z_const char *)"stream error", /* Z_STREAM_ERROR (-2) */ + (z_const char *)"data error", /* Z_DATA_ERROR (-3) */ + (z_const char *)"insufficient memory", /* Z_MEM_ERROR (-4) */ + (z_const char *)"buffer error", /* Z_BUF_ERROR (-5) */ + (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */ + (z_const char *)"" +}; + + +const char * ZEXPORT zlibVersion() +{ + return ZLIB_VERSION; +} + +uLong ZEXPORT zlibCompileFlags() +{ + uLong flags; + + flags = 0; + switch ((int)(sizeof(uInt))) { + case 2: break; + case 4: flags += 1; break; + case 8: flags += 2; break; + default: flags += 3; + } + switch ((int)(sizeof(uLong))) { + case 2: break; + case 4: flags += 1 << 2; break; + case 8: flags += 2 << 2; break; + default: flags += 3 << 2; + } + switch ((int)(sizeof(voidpf))) { + case 2: break; + case 4: flags += 1 << 4; break; + case 8: flags += 2 << 4; break; + default: flags += 3 << 4; + } + switch ((int)(sizeof(z_off_t))) { + case 2: break; + case 4: flags += 1 << 6; break; + case 8: flags += 2 << 6; break; + default: flags += 3 << 6; + } +#ifdef ZLIB_DEBUG + flags += 1 << 8; +#endif +#if defined(ASMV) || defined(ASMINF) + flags += 1 << 9; +#endif +#ifdef ZLIB_WINAPI + flags += 1 << 10; +#endif +#ifdef BUILDFIXED + flags += 1 << 12; +#endif +#ifdef DYNAMIC_CRC_TABLE + flags += 1 << 13; +#endif +#ifdef NO_GZCOMPRESS + flags += 1L << 16; +#endif +#ifdef NO_GZIP + flags += 1L << 17; +#endif +#ifdef PKZIP_BUG_WORKAROUND + flags += 1L << 20; +#endif +#ifdef FASTEST + flags += 1L << 21; +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifdef NO_vsnprintf + flags += 1L << 25; +# ifdef HAS_vsprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_vsnprintf_void + flags += 1L << 26; +# endif +# endif +#else + flags += 1L << 24; +# ifdef NO_snprintf + flags += 1L << 25; +# ifdef HAS_sprintf_void + flags += 1L << 26; +# endif +# else +# ifdef HAS_snprintf_void + flags += 1L << 26; +# endif +# endif +#endif + return flags; +} + +#ifdef ZLIB_DEBUG +#include +# ifndef verbose +# define verbose 0 +# endif +int ZLIB_INTERNAL z_verbose = verbose; + +void ZLIB_INTERNAL z_error (m) + char *m; +{ + fprintf(stderr, "%s\n", m); + exit(1); +} +#endif + +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + +#if defined(_WIN32_WCE) + /* The Microsoft C Run-Time Library for Windows CE doesn't have + * errno. We define it as a global variable to simplify porting. + * Its value is always 0 and should not be used. + */ + int errno = 0; +#endif + +#ifndef HAVE_MEMCPY + +void ZLIB_INTERNAL zmemcpy(dest, source, len) + Bytef* dest; + const Bytef* source; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = *source++; /* ??? to be unrolled */ + } while (--len != 0); +} + +int ZLIB_INTERNAL zmemcmp(s1, s2, len) + const Bytef* s1; + const Bytef* s2; + uInt len; +{ + uInt j; + + for (j = 0; j < len; j++) { + if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; + } + return 0; +} + +void ZLIB_INTERNAL zmemzero(dest, len) + Bytef* dest; + uInt len; +{ + if (len == 0) return; + do { + *dest++ = 0; /* ??? to be unrolled */ + } while (--len != 0); +} +#endif + +#ifndef Z_SOLO + +#ifdef SYS16BIT + +#ifdef __TURBOC__ +/* Turbo C in 16-bit mode */ + +# define MY_ZCALLOC + +/* Turbo C malloc() does not allow dynamic allocation of 64K bytes + * and farmalloc(64K) returns a pointer with an offset of 8, so we + * must fix the pointer. Warning: the pointer must be put back to its + * original form in order to free it, use zcfree(). + */ + +#define MAX_PTR 10 +/* 10*64K = 640K */ + +local int next_ptr = 0; + +typedef struct ptr_table_s { + voidpf org_ptr; + voidpf new_ptr; +} ptr_table; + +local ptr_table table[MAX_PTR]; +/* This table is used to remember the original form of pointers + * to large buffers (64K). Such pointers are normalized with a zero offset. + * Since MSDOS is not a preemptive multitasking OS, this table is not + * protected from concurrent access. This hack doesn't work anyway on + * a protected system like OS/2. Use Microsoft C instead. + */ + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size) +{ + voidpf buf; + ulg bsize = (ulg)items*size; + + (void)opaque; + + /* If we allocate less than 65520 bytes, we assume that farmalloc + * will return a usable pointer which doesn't have to be normalized. + */ + if (bsize < 65520L) { + buf = farmalloc(bsize); + if (*(ush*)&buf != 0) return buf; + } else { + buf = farmalloc(bsize + 16L); + } + if (buf == NULL || next_ptr >= MAX_PTR) return NULL; + table[next_ptr].org_ptr = buf; + + /* Normalize the pointer to seg:0 */ + *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; + *(ush*)&buf = 0; + table[next_ptr++].new_ptr = buf; + return buf; +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + int n; + + (void)opaque; + + if (*(ush*)&ptr != 0) { /* object < 64K */ + farfree(ptr); + return; + } + /* Find the original pointer */ + for (n = 0; n < next_ptr; n++) { + if (ptr != table[n].new_ptr) continue; + + farfree(table[n].org_ptr); + while (++n < next_ptr) { + table[n-1] = table[n]; + } + next_ptr--; + return; + } + Assert(0, "zcfree: ptr not found"); +} + +#endif /* __TURBOC__ */ + + +#ifdef M_I86 +/* Microsoft C in 16-bit mode */ + +# define MY_ZCALLOC + +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) +# define _halloc halloc +# define _hfree hfree +#endif + +voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size) +{ + (void)opaque; + return _halloc((long)items, size); +} + +void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr) +{ + (void)opaque; + _hfree(ptr); +} + +#endif /* M_I86 */ + +#endif /* SYS16BIT */ + + +#ifndef MY_ZCALLOC /* Any system without a special alloc function */ + +#ifndef STDC +extern voidp malloc OF((uInt size)); +extern voidp calloc OF((uInt items, uInt size)); +extern void free OF((voidpf ptr)); +#endif + +voidpf ZLIB_INTERNAL zcalloc (opaque, items, size) + voidpf opaque; + unsigned items; + unsigned size; +{ + (void)opaque; + return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : + (voidpf)calloc(items, size); +} + +void ZLIB_INTERNAL zcfree (opaque, ptr) + voidpf opaque; + voidpf ptr; +{ + (void)opaque; + free(ptr); +} + +#endif /* MY_ZCALLOC */ + +#endif /* !Z_SOLO */ diff --git a/deps/zlib-1.2.11/zutil.h b/deps/zlib-1.2.11/zutil.h old mode 100644 new mode 100755 index 848853f..b0388b0 --- a/deps/zlib-1.2.11/zutil.h +++ b/deps/zlib-1.2.11/zutil.h @@ -21,9 +21,17 @@ #include "zlib.h" -#include -#include -#include +#if defined(STDC) && !defined(Z_SOLO) +# if !(defined(_WIN32_WCE) && defined(_MSC_VER)) +# include +# endif +# include +# include +#endif + +#ifdef Z_SOLO + typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */ +#endif #ifndef local # define local static @@ -72,12 +80,178 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */ #define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */ -/* common defaults */ -/* functions */ + /* target dependencies */ -#define zmemcpy memcpy -#define zmemcmp memcmp -#define zmemzero(dest, len) memset(dest, 0, len) +#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32)) +# define OS_CODE 0x00 +# ifndef Z_SOLO +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif +# else /* MSC or DJGPP */ +# include +# endif +# endif +#endif + +#ifdef AMIGA +# define OS_CODE 1 +#endif + +#if defined(VAXC) || defined(VMS) +# define OS_CODE 2 +#endif + +#ifdef __370__ +# if __TARGET_LIB__ < 0x20000000 +# define OS_CODE 4 +# elif __TARGET_LIB__ < 0x40000000 +# define OS_CODE 11 +# else +# define OS_CODE 8 +# endif +#endif + +#if defined(ATARI) || defined(atarist) +# define OS_CODE 5 +#endif + +#ifdef OS2 +# define OS_CODE 6 +# if defined(M_I86) && !defined(Z_SOLO) +# include +# endif +#endif + +#if defined(MACOS) || defined(TARGET_OS_MAC) +# define OS_CODE 7 +# ifndef Z_SOLO +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif +# endif +#endif + +#ifdef __acorn +# define OS_CODE 13 +#endif + +#if defined(WIN32) && !defined(__CYGWIN__) +# define OS_CODE 10 +#endif + +#ifdef _BEOS_ +# define OS_CODE 16 +#endif + +#ifdef __TOS_OS400__ +# define OS_CODE 18 +#endif + +#ifdef __APPLE__ +# define OS_CODE 19 +#endif + +#if defined(_BEOS_) || defined(RISCOS) +# define fdopen(fd,mode) NULL /* No fdopen() */ +#endif + +#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX +# if defined(_WIN32_WCE) +# define fdopen(fd,mode) NULL /* No fdopen() */ +# ifndef _PTRDIFF_T_DEFINED + typedef int ptrdiff_t; +# define _PTRDIFF_T_DEFINED +# endif +# else +# define fdopen(fd,type) _fdopen(fd,type) +# endif +#endif + +#if defined(__BORLANDC__) && !defined(MSDOS) + #pragma warn -8004 + #pragma warn -8008 + #pragma warn -8066 +#endif + +/* provide prototypes for these when building zlib without LFS */ +#if !defined(_WIN32) && \ + (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0) + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +#endif + + /* common defaults */ + +#ifndef OS_CODE +# define OS_CODE 3 /* assume Unix */ +#endif + + /* functions */ + +#if defined(pyr) || defined(Z_SOLO) +# define NO_MEMCPY +#endif +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) + /* Use our own functions for small and medium model with MSC <= 5.0. + * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. + */ +# define NO_MEMCPY +#endif +#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY) +# define HAVE_MEMCPY +#endif +#ifdef HAVE_MEMCPY +# ifdef SMALL_MEDIUM /* MSDOS small or medium model */ +# define zmemcpy _fmemcpy +# define zmemcmp _fmemcmp +# define zmemzero(dest, len) _fmemset(dest, 0, len) +# else +# define zmemcpy memcpy +# define zmemcmp memcmp +# define zmemzero(dest, len) memset(dest, 0, len) +# endif +#else + void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); + void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len)); +#endif + +/* Diagnostic functions */ +#ifdef ZLIB_DEBUG +# include + extern int ZLIB_INTERNAL z_verbose; + extern void ZLIB_INTERNAL z_error OF((char *m)); +# define Assert(cond,msg) {if(!(cond)) z_error(msg);} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +#ifndef Z_SOLO + voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items, + unsigned size)); + void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr)); +#endif #define ZALLOC(strm, items, size) \ (*((strm)->zalloc))((strm)->opaque, (items), (size))