retroarch-joypad-autoconfig/udev/Bliss-Box 4-Play PSX_DS2 Port 3.cfg

# Bliss-Box 4-Play            - http://skunx7.wixsite.com/bliss-box
# Firmware v2.225             - http://skunx7.wixsite.com/bliss-box/downloads     - https://anyfile.255bits.com/wix/download?id=6c071e5f82a0bf863c94bd1b5febc230

input_driver = "udev"
input_device = "Bliss-Box 4-Play PSX_DS2"
input_device_display_name = "4-Play P3 PSX_DS2"

# Hex vid:pid is found using "dmesg -w" or "tail -f /var/log/syslog" and converted to Decimal using http://www.binaryhexconverter.com/hex-to-decimal-converter
# Hex vid:pid = 16d0:0d06 -> Decimal vid:pid = 5840:3334
input_vendor_id = "5840"
input_product_id = "3334"

input_b_btn = "2"
input_y_btn = "1"
input_select_btn = "5"
input_start_btn = "6"
input_a_btn = "4"
input_x_btn = "3"
input_l_btn = "7"
input_r_btn = "8"
input_l2_btn = "9"
input_r2_btn = "10"
input_l3_btn = "15"
input_r3_btn = "16"
input_l_x_plus_axis = "+0"
input_l_x_minus_axis = "-0"
input_l_y_plus_axis = "+1"
input_l_y_minus_axis = "-1"
input_r_x_plus_axis = "+3"
input_r_x_minus_axis = "-3"
input_r_y_plus_axis = "+4"
input_r_y_minus_axis = "-4"

input_b_btn_label = "Cross"
input_y_btn_label = "Square"
input_select_btn_label = "Select"
input_start_btn_label = "Start"
input_a_btn_label = "Circle"
input_x_btn_label = "Triangle"
input_l_btn_label = "Left Shoulder"
input_r_btn_label = "Right Shoulder"
input_l2_btn_label = "Left Trigger"
input_r2_btn_label = "Right Trigger"
input_l3_btn_label = "Left Thumb"
input_r3_btn_label = "Right Thumb"
input_l_x_plus_axis_label = "Left Analog Right"
input_l_x_minus_axis_label = "Left Analog Left"
input_l_y_plus_axis_label = "Left Analog Down"
input_l_y_minus_axis_label = "Left Analog Up"
input_r_x_plus_axis_label = "Right Analog Right"
input_r_x_minus_axis_label = "Right Analog Left"
input_r_y_plus_axis_label = "Right Analog Down"
input_r_y_minus_axis_label = "Right Analog Up"

input_up_btn = "11"
input_down_btn = "12"
input_left_btn = "13"
input_right_btn = "14"

input_up_btn_label = "D-Pad Up"
input_down_btn_label = "D-Pad Down"
input_left_btn_label = "D-Pad Left"
input_right_btn_label = "D-Pad Right"

# -------------------------------------------------------------------------------------------------------------------------------------------------
# If RetroArch does NOT detect the controller when connected and port has been reset,
# fix it by adding this udev rule (the line below WITHOUT the # symbol at the beginning!) to "/etc/udev/rules.d/10-local.rules" and reboot.
# SUBSYSTEM=="usb", ATTRS{idVendor}=="16d0", MODE="0666"
# -------------------------------------------------------------------------------------------------------------------------------------------------