scummvm/sound/fmopl.h
James Brown 9809c86373 Add boilerplate license to some files, to satisfy Debian types :)
fmopl.c/fmopl.h are infringing on the GPL at the moment. We either need to
replace these, or get permission to relicense them, before 0.2.0

svn-id: r4036
2002-04-21 17:46:42 +00:00

157 lines
5.9 KiB
C

/* ENDER: Not GPLed. Replace or relicense before 0.2.0 */
#ifndef __FMOPL_H_
#define __FMOPL_H_
/* --- select emulation chips --- */
#define BUILD_YM3812 (HAS_YM3812)
#define BUILD_YM3526 (HAS_YM3526)
#define BUILD_Y8950 (HAS_Y8950)
/* --- system optimize --- */
/* select bit size of output : 8 or 16 */
#define OPL_OUTPUT_BIT 16
/* compiler dependence */
#ifndef OSD_CPU_H
#define OSD_CPU_H
typedef unsigned char UINT8; /* unsigned 8bit */
typedef unsigned short UINT16; /* unsigned 16bit */
typedef unsigned int UINT32; /* unsigned 32bit */
typedef signed char INT8; /* signed 8bit */
typedef signed short INT16; /* signed 16bit */
typedef signed int INT32; /* signed 32bit */
#endif
#if (OPL_OUTPUT_BIT==16)
typedef INT16 OPLSAMPLE;
#endif
#if (OPL_OUTPUT_BIT==8)
typedef unsigned char OPLSAMPLE;
#endif
typedef void (*OPL_TIMERHANDLER)(int channel,double interval_Sec);
typedef void (*OPL_IRQHANDLER)(int param,int irq);
typedef void (*OPL_UPDATEHANDLER)(int param,int min_interval_us);
typedef void (*OPL_PORTHANDLER_W)(int param,unsigned char data);
typedef unsigned char (*OPL_PORTHANDLER_R)(int param);
/* !!!!! here is private section , do not access there member direct !!!!! */
#define OPL_TYPE_WAVESEL 0x01 /* waveform select */
#define OPL_TYPE_ADPCM 0x02 /* DELTA-T ADPCM unit */
#define OPL_TYPE_KEYBOARD 0x04 /* keyboard interface */
#define OPL_TYPE_IO 0x08 /* I/O port */
/* Saving is necessary for member of the 'R' mark for suspend/resume */
/* ---------- OPL one of slot ---------- */
typedef struct fm_opl_slot {
INT32 TL; /* total level :TL << 8 */
INT32 TLL; /* adjusted now TL */
UINT8 KSR; /* key scale rate :(shift down bit) */
INT32 *AR; /* attack rate :&AR_TABLE[AR<<2] */
INT32 *DR; /* decay rate :&DR_TALBE[DR<<2] */
INT32 SL; /* sustin level :SL_TALBE[SL] */
INT32 *RR; /* release rate :&DR_TABLE[RR<<2] */
UINT8 ksl; /* keyscale level :(shift down bits) */
UINT8 ksr; /* key scale rate :kcode>>KSR */
UINT32 mul; /* multiple :ML_TABLE[ML] */
UINT32 Cnt; /* frequency count : */
UINT32 Incr; /* frequency step : */
/* envelope generator state */
UINT8 eg_typ; /* envelope type flag */
UINT8 evm; /* envelope phase */
INT32 evc; /* envelope counter */
INT32 eve; /* envelope counter end point */
INT32 evs; /* envelope counter step */
INT32 evsa; /* envelope step for AR :AR[ksr] */
INT32 evsd; /* envelope step for DR :DR[ksr] */
INT32 evsr; /* envelope step for RR :RR[ksr] */
/* LFO */
UINT8 ams; /* ams flag */
UINT8 vib; /* vibrate flag */
/* wave selector */
INT32 **wavetable;
}OPL_SLOT;
/* ---------- OPL one of channel ---------- */
typedef struct fm_opl_channel {
OPL_SLOT SLOT[2];
UINT8 CON; /* connection type */
UINT8 FB; /* feed back :(shift down bit) */
INT32 *connect1; /* slot1 output pointer */
INT32 *connect2; /* slot2 output pointer */
INT32 op1_out[2]; /* slot1 output for selfeedback */
/* phase generator state */
UINT32 block_fnum; /* block+fnum : */
UINT8 kcode; /* key code : KeyScaleCode */
UINT32 fc; /* Freq. Increment base */
UINT32 ksl_base; /* KeyScaleLevel Base step */
UINT8 keyon; /* key on/off flag */
} OPL_CH;
/* OPL state */
struct FM_OPL {
UINT8 type; /* chip type */
int clock; /* master clock (Hz) */
int rate; /* sampling rate (Hz) */
double freqbase; /* frequency base */
double TimerBase; /* Timer base time (==sampling time) */
UINT8 address; /* address register */
UINT8 status; /* status flag */
UINT8 statusmask; /* status mask */
UINT32 mode; /* Reg.08 : CSM , notesel,etc. */
/* Timer */
int T[2]; /* timer counter */
UINT8 st[2]; /* timer enable */
/* FM channel slots */
OPL_CH *P_CH; /* pointer of CH */
int max_ch; /* maximum channel */
/* Rythm sention */
UINT8 rythm; /* Rythm mode , key flag */
/* time tables */
/* LFO */
INT32 *ams_table;
INT32 *vib_table;
INT32 amsCnt;
INT32 amsIncr;
INT32 vibCnt;
INT32 vibIncr;
/* wave selector enable flag */
UINT8 wavesel;
/* external event callback handler */
OPL_TIMERHANDLER TimerHandler; /* TIMER handler */
int TimerParam; /* TIMER parameter */
OPL_IRQHANDLER IRQHandler; /* IRQ handler */
int IRQParam; /* IRQ parameter */
OPL_UPDATEHANDLER UpdateHandler; /* stream update handler */
int UpdateParam; /* stream update parameter */
INT32 AR_TABLE[75]; /* atttack rate tables */
INT32 DR_TABLE[75]; /* decay rate tables */
UINT32 FN_TABLE[1024]; /* fnumber -> increment counter */
};
/* ---------- Generic interface section ---------- */
#define OPL_TYPE_YM3526 (0)
#define OPL_TYPE_YM3812 (OPL_TYPE_WAVESEL)
#define OPL_TYPE_Y8950 (OPL_TYPE_ADPCM|OPL_TYPE_KEYBOARD|OPL_TYPE_IO)
FM_OPL *OPLCreate(int type, int clock, int rate);
void OPLDestroy(FM_OPL *OPL);
void OPLSetTimerHandler(FM_OPL *OPL,OPL_TIMERHANDLER TimerHandler,int channelOffset);
void OPLSetIRQHandler(FM_OPL *OPL,OPL_IRQHANDLER IRQHandler,int param);
void OPLSetUpdateHandler(FM_OPL *OPL,OPL_UPDATEHANDLER UpdateHandler,int param);
void OPLResetChip(FM_OPL *OPL);
int OPLWrite(FM_OPL *OPL,int a,int v);
unsigned char OPLRead(FM_OPL *OPL,int a);
int OPLTimerOver(FM_OPL *OPL,int c);
void OPLWriteReg(FM_OPL *OPL, int r, int v);
/* YM3626/YM3812 local section */
void YM3812UpdateOne(FM_OPL *OPL, INT16 *buffer, int length);
#endif